openwrt

Commit Graph

Author	SHA1	Message	Date
Jonas Gorski	a7a82db16f	bcm63xx: fix port state after network down bcm_enetsw_probe did not properly reset port states, resulting in connected ports staying disabled after bringing up the interface the second time. SVN-Revision: 31881	2012-05-27 13:22:40 +00:00
Jonas Gorski	e19ed52fd1	bcm63xx: add a fixup for ath9k devices SVN-Revision: 31880	2012-05-27 13:22:37 +00:00
Jonas Gorski	e34018cc9e	bcm63xx: add support for the HSSPI controller Add support for the HSSPI controller found on bcm6328 and SPI attached flash. SVN-Revision: 31879	2012-05-27 13:22:33 +00:00
Jonas Gorski	099d5eec06	bcm63xx: add preliminary support for bcm6328 SVN-Revision: 31878	2012-05-27 13:22:29 +00:00
Jonas Gorski	7dbb132c88	bcm63xx: add flash type detection SVN-Revision: 31877	2012-05-27 13:22:25 +00:00
Jonas Gorski	b0ffeb0021	bcm63xx: pad Speedport W303 V images to 4 MiB Prevents CFE from flashing to the second image offset. Fix up the rootfs length on first boot else CFE will complain. SVN-Revision: 31876	2012-05-27 13:22:22 +00:00
Jonas Gorski	226b030e44	bcm63xx: add a default switch configuration for DSL-274XB SVN-Revision: 31874	2012-05-27 13:22:17 +00:00
Jonas Gorski	db1ff5c6fa	bcm63xx: setup network config through uci-defaults SVN-Revision: 31873	2012-05-27 13:22:14 +00:00
Jonas Gorski	72b4fdecc9	bcm63xx: move the board name workaround to /lib/brcm63xx.sh SVN-Revision: 31872	2012-05-27 13:22:11 +00:00
Jonas Gorski	dd37687de0	bcm63xx: use the exact board id as board identification string No need to keep the bcm63xx/ at the start or the chipid info at the end. SVN-Revision: 31871	2012-05-27 13:22:08 +00:00
Felix Fietkau	230c0eb2cb	kernel: fix a warning in the connmark module SVN-Revision: 31856	2012-05-24 18:25:08 +00:00
Gabor Juhos	2ae5581447	kernel: update linux 3.3 to 3.3.7 SVN-Revision: 31848	2012-05-23 21:05:32 +00:00
Gabor Juhos	c57409e79d	ar71xx: fix an insignificant typo Patch from #11485. SVN-Revision: 31847	2012-05-23 21:05:30 +00:00
Gabor Juhos	013f434f5b	ar71xx: fix WLAN led for RB751U-2HnD and RB751G-2HnD Patch by Kamil Trzciński <ayufan@osk-net.pl> SVN-Revision: 31846	2012-05-23 21:05:25 +00:00
Gabor Juhos	758f670376	ar71xx: add support for TP-Link TL-MR3040 Support for TP-Link TL-MR3040. Power LED not working - always on red, after start should be green. Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> SVN-Revision: 31845	2012-05-23 21:05:24 +00:00
Gabor Juhos	e4720dfa95	ramips: Add byte queue limits support to net/ethernet/ramips_main.c Add byte queue limits support to net/ethernet/ramips_main.c "Byte queue limits are a mechanism to limit the size of the transmit hardware queue on a NIC by number of bytes. The goal of these byte limits is too reduce latency (HOL blocking) caused by excessive queuing in hardware (aka buffer bloat) without sacrificing throughput." Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 31844	2012-05-23 21:05:23 +00:00
Gabor Juhos	1d286fd755	ramips: Enable sysupgrade for Sitecom WL-351 Sysupgrade works just fine on my Sitecom WL-351 after adding this oneliner. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 31843	2012-05-23 21:05:22 +00:00
Gabor Juhos	1e1c0a5405	linux/3.3: avoid recursive calling of mtd_writev in the block2mtd driver Should fix #11513. Tested with the x86/generic squashfs image within a VM. SVN-Revision: 31841	2012-05-23 21:05:19 +00:00
Felix Fietkau	9037c2ccc6	lantiq: allow platforms with rt2x00 to override the mac address without overriding eeprom, fixes bogus wlan mac address on arv4520 SVN-Revision: 31835	2012-05-20 21:58:03 +00:00
Felix Fietkau	ce59af117c	kernel: merge a net-next fq_codel backlog handling fix SVN-Revision: 31813	2012-05-18 22:12:15 +00:00
Gabor Juhos	02c2f449d7	omap24xx: add support for 3.3 Compile tested only. SVN-Revision: 31810	2012-05-18 20:22:32 +00:00
Gabor Juhos	c2a2d59db5	cns3xxx: add support for 3.3 Compile tested only. SVN-Revision: 31809	2012-05-18 20:10:53 +00:00
Gabor Juhos	1fd4bf270b	linux/2.6.39: R.I.P. SVN-Revision: 31808	2012-05-18 20:10:51 +00:00
Gabor Juhos	05c0d8b28e	cns3xxx: sync kernel config SVN-Revision: 31807	2012-05-18 20:10:48 +00:00
Gabor Juhos	9718f03e24	cns3xxx: remove 2.6.39 support SVN-Revision: 31806	2012-05-18 20:10:46 +00:00
Gabor Juhos	9e78becbac	cns3xxx: switch to 3.1 Compile tested only. SVN-Revision: 31805	2012-05-18 20:10:44 +00:00
Gabor Juhos	07b5a3eea2	x86: remove support for old kernels SVN-Revision: 31804	2012-05-18 20:10:42 +00:00
Gabor Juhos	604e3aac0a	x86: remove subtarget specific LINUX_VERSION overrides SVN-Revision: 31803	2012-05-18 20:10:38 +00:00
Gabor Juhos	d9dab97d38	x86/ep80579: switch to 3.3 Also fix build errors in the ep80579-drivers package. Compile tested only. SVN-Revision: 31802	2012-05-18 20:10:33 +00:00
Hauke Mehrtens	c63ef04874	brcm47xx: fix nvram read out on devices with serial flash detect nvram on Linksys E3200 SVN-Revision: 31790	2012-05-18 16:04:10 +00:00
Hauke Mehrtens	7ad663dda6	brcm47xx: bcma: fix null pointer SVN-Revision: 31789	2012-05-18 15:46:30 +00:00
Hauke Mehrtens	b4ecf522cd	brcm47xx: ssb: recognize ARM Cortex M3 SVN-Revision: 31788	2012-05-18 15:45:51 +00:00
Hauke Mehrtens	7be88d2ad8	brcm47xx: some fixes for the USB driver SVN-Revision: 31787	2012-05-18 15:44:25 +00:00
Gabor Juhos	e3678eb33e	cobalt: remove 2.6.39 specific patches SVN-Revision: 31785	2012-05-18 09:59:22 +00:00
Gabor Juhos	a5de52c244	x86/olpc: switch to 3.3 Compile tested only. SVN-Revision: 31784	2012-05-18 09:57:32 +00:00
Gabor Juhos	9e54e012d6	x86: image: select bootscript images by default for OLPC SVN-Revision: 31783	2012-05-18 09:57:29 +00:00
Felix Fietkau	3f62f5211a	adm5120: add missing config symbols for the rb1xx subtarget, fixes #11407 SVN-Revision: 31781	2012-05-17 21:20:23 +00:00
Felix Fietkau	03babf3641	target: add a feature flag for RTC support SVN-Revision: 31777	2012-05-17 15:28:09 +00:00
Hauke Mehrtens	c30405070c	kernel: add some missing config options added by r31756 SVN-Revision: 31774	2012-05-17 13:28:30 +00:00
Hauke Mehrtens	273797f15a	kernel: ssb/bcma: update to version from wireless-testing tag master-2012-05-16-2 SVN-Revision: 31772	2012-05-17 13:22:38 +00:00
Hauke Mehrtens	3491d8c017	brcm47xx: remove support for kernel 3.2 SVN-Revision: 31771	2012-05-17 13:20:10 +00:00
Gabor Juhos	562e468ae5	x86/thincan: switch to 3.3 Compile tested only. SVN-Revision: 31765	2012-05-17 06:41:01 +00:00
Gabor Juhos	1f7f8376a6	x86/xen_domu: switch to 3.3 Compile tested only. SVN-Revision: 31764	2012-05-17 06:41:00 +00:00
Gabor Juhos	8bb7ddecfd	x86/kvm_guest: switch to 3.3 Compile tested only. SVN-Revision: 31763	2012-05-17 06:40:58 +00:00
Gabor Juhos	f14d1a588d	x86/generic: switch to 3.3 Compile tested only. SVN-Revision: 31762	2012-05-17 06:40:56 +00:00
Felix Fietkau	54edbfabac	kernel: add codel and fq_codel to generic 3.3 patch set (based on patch by Dave Täht) Codel is a new AQM algorithm and RED replacement designed by Kathie Nichols and Van Jacobson, and published in ACM queue: http://queue.acm.org/detail.cfm?id=2209336 Codel stands for "Controlled Delay", and needs no knobs in the general case, twiddled, for optimum results. It aims for 5ms of delay, at most, when in use. Additionally, fq_codel (by eric dumazet) builds on codel to provide fair queuing superior to what could be had with SFQ, and drop behavior saner than RED, BLUE, or choke. These patches are backported from net-next and are known to work on Linux 3.3.4 and later. Includes updates to codel for better portability and speed SVN-Revision: 31756	2012-05-16 15:23:03 +00:00
Gabor Juhos	eb2fe5e863	x86/alix2: switch to 3.3 Compile tested only. SVN-Revision: 31753	2012-05-16 10:45:02 +00:00
Gabor Juhos	fb7da5bbde	x86/net5501: switch to 3.3 Compile tested only. SVN-Revision: 31752	2012-05-16 10:44:59 +00:00
Gabor Juhos	9e049ce25c	x86: sync 3.3 configs SVN-Revision: 31751	2012-05-16 10:44:55 +00:00
Gabor Juhos	19f691f8e4	x86: sync 3.2 configs SVN-Revision: 31750	2012-05-16 10:44:52 +00:00
Gabor Juhos	724fd5e657	x86: sync 2.6.39 configs SVN-Revision: 31749	2012-05-16 10:44:49 +00:00
Gabor Juhos	637fd23428	linux/3.3: add missing symbol SVN-Revision: 31748	2012-05-16 10:44:46 +00:00
Gabor Juhos	67675fd48d	linux: add CONFIG_POWER_SUPPLY_DEBUG symbol It was missing in the previous commit. SVN-Revision: 31738	2012-05-15 11:12:31 +00:00
Gabor Juhos	39994008cb	linux: move certain disabled symbols to the generic configs * CONFIG_ARCH_DMA_ADDR_T_64BIT * CONFIG_ARCH_HAS_ILOG2_U32 * CONFIG_ARCH_HAS_ILOG2_U64 * CONFIG_ARCH_PHYS_ADDR_T_64BIT * CONFIG_ARCH_SUPPORTS_MSI * CONFIG_GENERIC_CPU_DEVICES * CONFIG_HWMON_DEBUG_CHIP * CONFIG_I2C_PXA_PCI * CONFIG_LEDS_GPIO * CONFIG_MINIX_FS_NATIVE_ENDIAN * CONFIG_MLX4_CORE * CONFIG_POWER_SUPPLY * CONFIG_POWER_SUPPLY_DEBUG * CONFIG_QUOTACTL * CONFIG_SDIO_UART * CONFIG_SENSORS_K10TEMP * CONFIG_SENSORS_SCH56XX_COMMON * CONFIG_SENSORS_VIA_CPUTEMP * CONFIG_SERIO_AMBAKMI * CONFIG_SERIO_I8042 * CONFIG_SERIO_LIBPS2 * CONFIG_SERIO_PCIPS2 * CONFIG_SERIO_RAW * CONFIG_SERIO_SERPORT * CONFIG_SPI_BITBANG * CONFIG_SPI_GPIO SVN-Revision: 31737	2012-05-15 10:58:52 +00:00
Felix Fietkau	a3f2fd187b	ar71xx: remove AG71XX_RX_PKT_RESERVE, it is no longer necessary (found by Eric Dumazet) SVN-Revision: 31736	2012-05-15 10:36:39 +00:00
John Crispin	364f47e454	code style cleanup of the mach files Signed-off-by: Luka Perkov <openwrt@lukaperkov.net> SVN-Revision: 31735	2012-05-15 09:38:05 +00:00
John Crispin	07dca108a9	adds zyxel p2601hnfx support Signed-off-by: Luka Perkov <openwrt@lukaperkov.net> SVN-Revision: 31734	2012-05-15 09:38:02 +00:00
John Crispin	9785ec070e	set 3.3.6 as default SVN-Revision: 31733	2012-05-15 09:37:59 +00:00
John Crispin	c61ada1db8	set 3.3.5 as default SVN-Revision: 31718	2012-05-14 16:11:26 +00:00
Gabor Juhos	2fceae7ec4	linux/3.0: R.I.P. It is used by the broken omap35xx/gumstix target only. SVN-Revision: 31717	2012-05-14 15:48:34 +00:00
Gabor Juhos	a3d349a3b3	realview: remove 3.0 support SVN-Revision: 31716	2012-05-14 15:48:32 +00:00
Gabor Juhos	e2ecabd761	realview: switch to 3.3 SVN-Revision: 31715	2012-05-14 15:48:31 +00:00
Gabor Juhos	46c7d58726	realview: add 3.3 support SVN-Revision: 31714	2012-05-14 15:48:29 +00:00
Gabor Juhos	8f629f2a22	linux/3.3: more missing config symbols SVN-Revision: 31713	2012-05-14 15:48:23 +00:00
Felix Fietkau	fab5ee9566	imagebuilder: explicitly install the kernel .ipk before installing anything else, it is no longer part of the package index (fixes #11450 ) SVN-Revision: 31711	2012-05-14 14:00:01 +00:00
Hauke Mehrtens	a798a81890	kernel: add CONFIG_BLK_DEV_PCIESSD_MTIP32XX SVN-Revision: 31710	2012-05-14 11:28:02 +00:00
Gabor Juhos	b472e5d12e	kernel: update linux 3.3 to 3.3.6 SVN-Revision: 31709	2012-05-14 09:18:32 +00:00
Hauke Mehrtens	679b6a0722	amazon: fix section mismatch SVN-Revision: 31707	2012-05-13 15:31:42 +00:00
Hauke Mehrtens	abd74f86b4	amazon: update amazon target to kernel 3.3 This is just compile tested, my device is currently not working. SVN-Revision: 31706	2012-05-13 15:10:40 +00:00
Gabor Juhos	60d3ffb49a	gemini: remove 2.6.37 support SVN-Revision: 31700	2012-05-13 12:04:04 +00:00
Gabor Juhos	672ff3de6e	gemini: switch to 3.3 SVN-Revision: 31699	2012-05-13 12:04:02 +00:00
Gabor Juhos	d0ac4c1f03	gemini: add support for 3.3 SVN-Revision: 31698	2012-05-13 12:03:59 +00:00
Hauke Mehrtens	482b99a660	brcm47xx: generate image for Linksys WRT610N V1 SVN-Revision: 31696	2012-05-13 00:16:57 +00:00
Hauke Mehrtens	31c2c485c1	kernel: ssb: add PCI IDs 0x4322 and 43222 The 0x4322 ID is found on the BCM4322 used on some SoCs like the Linksys WRT610N V1 connected to a BCM4705. The 43222 (0xa8d6) ID is found on the BCM43222 used on some other SoCs like the D-Link DSL-2760U connected to a BCM63xx. This fixes #10887. SVN-Revision: 31695	2012-05-13 00:08:12 +00:00
Hauke Mehrtens	5acb0b72be	brcm47xx: fix tg3 ssb patch Now tg3 works with the Ethernet core of the Linksys WRT610N v1 (again). SVN-Revision: 31694	2012-05-12 23:59:12 +00:00
Gabor Juhos	e710aeeab1	linux/2.6.38: R.I.P. It is used only by the broken coldfire target. SVN-Revision: 31688	2012-05-12 12:05:21 +00:00
Gabor Juhos	08ed044595	linux/2.6.37: R.I.P. SVN-Revision: 31687	2012-05-12 12:05:19 +00:00
Gabor Juhos	c8cede6aa7	linux: add broken flag to remaining targets which are using 2.6.37 SVN-Revision: 31686	2012-05-12 12:05:18 +00:00
Gabor Juhos	a2efef024e	iop32x: remove 2.6.37 support SVN-Revision: 31685	2012-05-12 10:49:36 +00:00
Gabor Juhos	a5d4de7da2	iop32x: switch to 3.3 It is compile tested only, so add a broken flag. SVN-Revision: 31684	2012-05-12 10:49:34 +00:00
Gabor Juhos	598fe0e93b	iop32x: add 3.3 support SVN-Revision: 31683	2012-05-12 10:49:32 +00:00
Gabor Juhos	bf8e96712e	sibyte: remove 2.6.37 support SVN-Revision: 31682	2012-05-12 10:49:30 +00:00
Gabor Juhos	edb129bb24	sibyte: switch to 3.3 It is compile tested only, so add a broken flag. SVN-Revision: 31681	2012-05-12 10:49:28 +00:00
Gabor Juhos	fd651daa4b	sibyte: add 3.3 support SVN-Revision: 31680	2012-05-12 10:49:26 +00:00
Gabor Juhos	4f6acae5f7	ixp4xx: fix ixp4xx_crypto build error SVN-Revision: 31679	2012-05-12 10:49:23 +00:00
Gabor Juhos	cabfa5b364	orion: remove the broken broken flag It is working on the Linksys WRT350N v2 at least: http://pastebin.com/KCAbJZs9 Additionally, the flag was added to a wrong place so it had no effect. Thanks to StrikerNL for testing. SVN-Revision: 31674	2012-05-10 20:20:43 +00:00
Gabor Juhos	ec27c35ebe	kirkwood: fix Kconfig symbol for NSA-310 SVN-Revision: 31673	2012-05-09 16:16:52 +00:00
John Crispin	dc4cfd3a64	Add 3.3 config files SVN-Revision: 31672	2012-05-09 12:52:24 +00:00
John Crispin	75827c538d	Add missing 3.3 patches SVN-Revision: 31671	2012-05-09 12:52:21 +00:00
John Crispin	7d638fbb2f	Drop 2.6.32 support SVN-Revision: 31670	2012-05-09 12:52:19 +00:00
Gabor Juhos	200227e0b4	kirkwood: add support for the ZyXEL NSA-310 SVN-Revision: 31669	2012-05-09 11:38:43 +00:00
Gabor Juhos	213cbf4297	kirkwood: add RaidSonic ICY BOX IB-NAS62x0 board support Based on a patch by Luka Perkov <openwrt@lukaperkov.net> SVN-Revision: 31668	2012-05-09 11:38:41 +00:00
Gabor Juhos	d4876692c1	kirkwood: enable GPIO sysfs interface SVN-Revision: 31667	2012-05-09 11:38:40 +00:00
Gabor Juhos	d1eed108bb	kirkwood: nuke 2.6.37 support SVN-Revision: 31666	2012-05-09 11:38:39 +00:00
Gabor Juhos	861b9b25e0	kirkwood: switch to 3.3 SVN-Revision: 31665	2012-05-09 11:38:37 +00:00
Gabor Juhos	b272041998	kirkwood: add 3.3 support Based on the 3.2.9 patches by Luka Perkov <openwrt@lukaperkov.net> SVN-Revision: 31664	2012-05-09 11:38:36 +00:00
Gabor Juhos	500ec36515	ixp4xx: nuke 2.6.37 support SVN-Revision: 31663	2012-05-09 10:48:44 +00:00
Gabor Juhos	d25a4e7ddc	ixp4xx: switch to 3.3 SVN-Revision: 31662	2012-05-09 10:48:43 +00:00
Gabor Juhos	d5093de0b1	mpc85xx: remove 2.6.38 support SVN-Revision: 31661	2012-05-09 10:48:41 +00:00
Gabor Juhos	ab71a428c5	mpc85xx: switch to 3.3 and add broken flag It is compile tested only. SVN-Revision: 31660	2012-05-09 10:48:39 +00:00
Gabor Juhos	db376b45d9	orion: nuke 3.0 support SVN-Revision: 31659	2012-05-09 10:48:38 +00:00
Gabor Juhos	24e2385a59	orion: switch to 3.3 and add broken flag It is compile tested only. SVN-Revision: 31658	2012-05-09 10:48:37 +00:00
Gabor Juhos	d640a15b73	linux/3.3: add missing RTC symbol SVN-Revision: 31654	2012-05-09 10:48:30 +00:00
Gabor Juhos	93c9980b94	ar71xx: fix build error if PCI is disabled SVN-Revision: 31646	2012-05-07 21:16:22 +00:00
Gabor Juhos	34018a630f	kernel: update linux 3.3 to 3.3.5 SVN-Revision: 31645	2012-05-07 20:11:43 +00:00
Gabor Juhos	6b5012ce1f	pxa: remove 2.6.37 support SVN-Revision: 31643	2012-05-07 17:40:15 +00:00
Gabor Juhos	1f1fd8616f	pxa: switch to 3.3 and mark it as broken It is working in qemu, but it has not been tested on real hardware. SVN-Revision: 31642	2012-05-07 17:40:09 +00:00
Gabor Juhos	b284c0e804	pxa: add support for 3.3 SVN-Revision: 31641	2012-05-07 17:40:06 +00:00
Jo-Philipp Wich	1a01559520	atheros: Fix compilation With our recent switch to the 3.3 kernel target, some headers were occidentally omitted. Signed-off-by: Jonathan Bither <jonbither@gmail.com> SVN-Revision: 31640	2012-05-07 17:06:39 +00:00
Jonas Gorski	b218b15709	bcm63xx: fix a race between PCI bus scan and fallback sprom registration The fallback sprom handler was installed too late, resulting in ssb failing to get a valid sprom on some devices. Fixes #11384. SVN-Revision: 31638	2012-05-06 21:25:34 +00:00
Felix Fietkau	0ff3c396d3	kernel: rewrite the phy packet hook, put it in the network stack to avoid having to keep non-upstream ethernet driver changes SVN-Revision: 31637	2012-05-06 21:19:14 +00:00
Hauke Mehrtens	d30f8da466	brcm47xx: add gpio_request_one() This fixes a compile error with kernel 3.3. SVN-Revision: 31635	2012-05-06 20:44:37 +00:00
Felix Fietkau	7799c88aa4	atheros: clean up the patches some more SVN-Revision: 31626	2012-05-06 17:15:00 +00:00
Felix Fietkau	9b20187ad5	atheros: update to 3.3.4 (based on work by acoul), fix mvswitch driver for newer kernels SVN-Revision: 31625	2012-05-06 17:08:30 +00:00
Jonas Gorski	30362b90af	AR7: don't mark as broken Linux 3.3.4 boots fine on my AR7 device. SVN-Revision: 31623	2012-05-06 14:04:19 +00:00
Gabor Juhos	28e897845f	ar7: remove 2.6.37 support SVN-Revision: 31617	2012-05-05 17:32:43 +00:00
Gabor Juhos	047a51c4fd	ar7: switch to 3.3 and mark the target as broken SVN-Revision: 31616	2012-05-05 17:32:41 +00:00
Gabor Juhos	dd884a6b73	ar7: add 3.3 support SVN-Revision: 31615	2012-05-05 17:32:39 +00:00
Gabor Juhos	e85a44f11b	ar7: fix kernel_entry extraction SVN-Revision: 31614	2012-05-05 17:32:36 +00:00
Gabor Juhos	9486904079	ar71xx: add profile and build image for the TL-WR1041N v2 board Patch-by: Vince Huang <axishero@foxmail.com> SVN-Revision: 31610	2012-05-05 17:02:41 +00:00
Gabor Juhos	ab897ab04e	ar71xx: add support for the TP-Link TL-WR1041N v2 board Patch-by: Vince Huang <axishero@foxmail.com> SVN-Revision: 31608	2012-05-05 17:02:35 +00:00
Gabor Juhos	56f2e08537	ar71xx: update 3.3 patches SVN-Revision: 31602	2012-05-05 13:56:35 +00:00
Gabor Juhos	8fffc6d6df	ar71xx: fix a typo in the db120 mach file Reported-by: Sven Eckelmann <sven@narfation.org> SVN-Revision: 31601	2012-05-05 13:56:30 +00:00
Hauke Mehrtens	8c352ff853	brcm47xx: update target to kernel 3.3 SVN-Revision: 31599	2012-05-05 12:53:37 +00:00
Gabor Juhos	2e3f8c480e	linux/2.6.32: R.I.P. SVN-Revision: 31597	2012-05-05 11:43:34 +00:00
Gabor Juhos	e005aed223	rdc: remove 2.6.32 support SVN-Revision: 31596	2012-05-05 11:43:32 +00:00
Gabor Juhos	0e086cfaf7	rdc: switch to 3.3 and mark the target as broken SVN-Revision: 31595	2012-05-05 11:43:30 +00:00
Gabor Juhos	787b253859	rb532: remove 2.6.32 support SVN-Revision: 31594	2012-05-05 11:43:29 +00:00
Gabor Juhos	63a532a472	rb532: switch to 3.3 and mark the target broken SVN-Revision: 31593	2012-05-05 11:43:26 +00:00
Gabor Juhos	b120e7f22a	rb532: add 3.3 support SVN-Revision: 31592	2012-05-05 11:43:23 +00:00
Gabor Juhos	6caa1aab10	mpc83xx: remove broken flag SVN-Revision: 31591	2012-05-05 11:43:21 +00:00
Gabor Juhos	257a201b56	mpc83xx: populate network config from an uci-default script SVN-Revision: 31590	2012-05-05 11:43:19 +00:00
Gabor Juhos	13ce8f8a77	mpc83xx: cleanup rb333.dts SVN-Revision: 31589	2012-05-05 11:43:16 +00:00
Gabor Juhos	a3d9877518	mpc83xx: fix MAC addresses on the RB333 SVN-Revision: 31588	2012-05-05 11:43:13 +00:00
Gabor Juhos	1a5a9c5dae	mpc83xx: fix build warnings in RB333/600 dtb wrappers SVN-Revision: 31587	2012-05-05 11:43:10 +00:00
Gabor Juhos	7ffa3fe02c	linux/2.6.32: fix layer7 patch SVN-Revision: 31586	2012-05-05 07:20:13 +00:00
Imre Kaloz	9a91dc9f71	upgrade to 3.3, enable framebuffer SVN-Revision: 31576	2012-05-03 21:51:58 +00:00
Jonas Gorski	b393464fb4	adm5120: add missing NULL terminator to partition parser list Fixes #11372. SVN-Revision: 31574	2012-05-03 21:03:50 +00:00
Hauke Mehrtens	22b2e3fbb9	brcm47xx: add support for kernel 3.3 SVN-Revision: 31573	2012-05-03 20:18:41 +00:00
Gabor Juhos	3349cf2691	Fix iptables abuse of kernel header files. Use exported headers instead. [juhosg: export xt_layer7.h for all kernel versions] Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> SVN-Revision: 31566	2012-05-03 09:43:10 +00:00
Gabor Juhos	b0449ccf04	ramips: W306R V2.0 - GPIO and Network fixes Fixed: GPIO typos and confirmed GPIO_BUTTON_RESET Fixed: Lan & Wan reversed: swaped "eth0.2" with "eth0.1" by removing a line(default is correct), and reversed the Lan/wan layout LLLLW to WLLLL. Added: image/Makefile now builds -factory.bin files. I am unsure of the accepted way to change the makefile but the name of the image needs to be 'linkn Kernel Image' in order to be accepted by the OEM firmware. Known issue: eth0 (internal switch i think has mac address: 00:11:22:33:44:55 but i think it should be same as the lan). Known issue: Pressing the reset button has no noticable effect, i would expect the router to boot failsafe if being pressed on boot, reboot if short press and reset all to default if long press. [juhosg: remove mtdlayout_W306R and use mtdlayout_4M instead] Signed-off-by: David Pearce <david_18051985@hotmail.com> SVN-Revision: 31557	2012-05-02 19:17:59 +00:00
Gabor Juhos	90e99b9fe8	ramips: Make serial console for DIR-300-B1 work again Make serial console for DIR-300-B1 work again. With some recent change, "console=ttyS1,57600" was removed from the default kernel command line, this adds the necessary mkcmdline incantation to image/Makefile to add it there for this target. This is quite likely broken for other targets as well. Without this the console switches to ttyS0 instead of ttyS1 and kernel output is missing, and the userspace comes up with 9600 baud instead of 57600. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 31556	2012-05-02 19:17:58 +00:00
Gabor Juhos	fb28062182	mpc83xx: remove 2.6.36 support SVN-Revision: 31555	2012-05-02 18:27:26 +00:00
Gabor Juhos	3269924fed	mpc83xx: switch to 3.3 SVN-Revision: 31554	2012-05-02 18:27:25 +00:00
Gabor Juhos	8ee595315d	mpc83xx: add support for 3.3 SVN-Revision: 31553	2012-05-02 18:27:22 +00:00
Gabor Juhos	b4b5f2d018	linux/3.3: add more missing symbols SVN-Revision: 31552	2012-05-02 18:27:19 +00:00
Florian Fainelli	5d9b44d110	use a define for the poll and debounce interval SVN-Revision: 31550	2012-05-02 15:40:26 +00:00
Gabor Juhos	7a2b3d8a55	linux/3.3: add more missing symbols SVN-Revision: 31548	2012-05-01 08:00:26 +00:00
Gabor Juhos	70322ba3d1	move CONFIG_BOOKE_WDT_DEFAULT_TIMEOUT to the target configs SVN-Revision: 31547	2012-05-01 08:00:25 +00:00
Imre Kaloz	880de62f91	switch to 2.6.38 SVN-Revision: 31546	2012-05-01 07:00:17 +00:00
Gabor Juhos	cbfce53831	kernel: update linux 3.3 to 3.3.4 SVN-Revision: 31541	2012-04-30 08:38:11 +00:00
Gabor Juhos	e931ffd678	linux: rtl836x: add a generic reset_switch function SVN-Revision: 31536	2012-04-29 18:29:31 +00:00
Gabor Juhos	1d9400263f	linux: rtl836x: rename rtl836_hw_init to rtl836_setup SVN-Revision: 31535	2012-04-29 18:29:29 +00:00
Gabor Juhos	badd7a3cf2	linux: rtl836x: add a reset_chip callback to rtl8366_smi_ops SVN-Revision: 31534	2012-04-29 18:29:26 +00:00
Gabor Juhos	3e3a4d3d6b	ar71xx: allow to disable link polling on unused PHYs SVN-Revision: 31533	2012-04-29 18:29:24 +00:00
Gabor Juhos	a8d3109208	rb532: remove 2.6.35 support The generic 2.6.35 support has been remove long time ago. SVN-Revision: 31532	2012-04-29 16:56:07 +00:00
Gabor Juhos	532b74ff7b	linux/3.3: refresh patches SVN-Revision: 31531	2012-04-29 16:56:03 +00:00
Gabor Juhos	27a1f6652a	rdc: add 3.3 support SVN-Revision: 31530	2012-04-29 15:59:49 +00:00
Gabor Juhos	c59b60fa0b	mpc85xx: add support for 3.3 Based on a patch by Wojciech Dubowik <Wojciech.Dubowik@neratec.com> SVN-Revision: 31529	2012-04-29 15:55:28 +00:00
Gabor Juhos	f687ca2296	orion: add 3.3 support SVN-Revision: 31528	2012-04-29 15:20:40 +00:00
Gabor Juhos	923ebbac81	linux/3.3: yet another missing symbol Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com> SVN-Revision: 31527	2012-04-29 15:08:24 +00:00
Gabor Juhos	55fdc18beb	linux/3.3: add support for the Pericom PT7C4338 I2C RTC chip Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com> SVN-Revision: 31525	2012-04-29 15:08:22 +00:00
Gabor Juhos	f6d5998d31	mpc85xx: add kmod-booke-wdt to the default packages Based on a patch by Wojciech Dubowik <Wojciech.Dubowik@neratec.com> SVN-Revision: 31523	2012-04-29 15:00:38 +00:00
Gabor Juhos	296086868a	mpc85xx: don't override CONFIG_WATHCDOG SVN-Revision: 31521	2012-04-29 15:00:36 +00:00
Gabor Juhos	77735b5930	linux: move CONFIG_BOOKE_WDT to the generic config SVN-Revision: 31520	2012-04-29 15:00:34 +00:00
Gabor Juhos	4fa9cf6c33	linux/2.6.36: R.I.P. SVN-Revision: 31519	2012-04-29 15:00:33 +00:00
Gabor Juhos	3bc2afc384	linux: add broken flag to targets which are using 2.6.36 SVN-Revision: 31518	2012-04-29 15:00:32 +00:00
Gabor Juhos	417185b33c	adm5120: create a new subtarget for the RB1xx devices SVN-Revision: 31513	2012-04-29 07:36:46 +00:00
Gabor Juhos	7925eea45f	adm5120: share a common kernel config between the subtargets SVN-Revision: 31512	2012-04-29 07:36:44 +00:00
Gabor Juhos	e96d52d198	adm5120: merge 3.3 patches SVN-Revision: 31511	2012-04-29 07:36:43 +00:00
Gabor Juhos	19be4923e0	adm5120: remove 2.6.32 support SVN-Revision: 31510	2012-04-29 07:36:37 +00:00
Gabor Juhos	aa48f1326b	adm5120: switch to 3.3.3 SVN-Revision: 31509	2012-04-29 07:36:36 +00:00
Gabor Juhos	a1a0f67748	adm5120: fix macronix bootloc patch SVN-Revision: 31508	2012-04-29 07:36:35 +00:00
Gabor Juhos	8e06682fb7	ramips: rt305x: extract wifi eeprom and use the 8M template for the UR-336UN Patch-by: Lebedev Dmitry <lebedev@trendnet.ru> SVN-Revision: 31507	2012-04-29 07:36:33 +00:00
Gabor Juhos	1a0ef04231	adm8668: merge 3.3 fixes SVN-Revision: 31497	2012-04-28 10:41:43 +00:00
Gabor Juhos	87ae19eaa3	adm8668: nuke 2.6.36 support SVN-Revision: 31496	2012-04-28 10:39:47 +00:00
Gabor Juhos	9a7e9e76a3	adm8668: switch to 3.3 SVN-Revision: 31495	2012-04-28 10:38:53 +00:00
Florian Fainelli	e047cf1899	switch to gpio-keys-polled SVN-Revision: 31491	2012-04-27 16:44:48 +00:00
Gabor Juhos	af2b3518af	linux/3.3: yet another missing symbol SVN-Revision: 31488	2012-04-27 06:31:43 +00:00
Felix Fietkau	34ffb526a2	build: rework verbosity level selection V=99 and V=1 are now deprecated in favor of a new verbosity class system, though the old flags are still supported. You can set the V variable on the command line (or OPENWRT_VERBOSE in the environment) to one or more of the following characters: - s: stdout+stderr (equal to the old V=99) - c: commands (for build systems that suppress commands by default, e.g. kbuild) - w: warnings/errors only (equal to the old V=1) SVN-Revision: 31484	2012-04-26 17:53:56 +00:00
Hauke Mehrtens	d7b7b99d6e	brcm47xx: BCMA - Modified PCI CFG space access The existing code (prior to the patch) does an "ioremap_nocache" on a subset of a memory region that I think has already been mapped, and then un-maps that smaller region when it is finished. Thanks Nathan Hintz for the patch SVN-Revision: 31481	2012-04-25 20:32:17 +00:00
Gabor Juhos	d8c7ac8a8a	adm8668: add support for 3.3 SVN-Revision: 31480	2012-04-25 18:53:49 +00:00
Gabor Juhos	7f09ba740a	adm8668: build gzip compressed uImage for testing SVN-Revision: 31479	2012-04-25 18:53:48 +00:00
Gabor Juhos	15d641eee1	adm8668: use a suffix for initramfs images SVN-Revision: 31478	2012-04-25 18:53:46 +00:00
Gabor Juhos	a447f1810c	ar71xx: enable MIB counters in the built-in switch of the AR934x SVN-Revision: 31476	2012-04-25 13:02:11 +00:00
Gabor Juhos	cad1fa359d	adm5120: remove 2.6.38 support SVN-Revision: 31475	2012-04-25 12:57:35 +00:00
Gabor Juhos	671361c7ea	adm5120: add 3.3 support Partially based on the 3.1 patches by Hartmut Knaack <knaack.h [at] gmx.de> SVN-Revision: 31474	2012-04-25 12:57:33 +00:00
Gabor Juhos	43d67fa995	linux/3.3: fix compiler warnings in the plat_nand driver SVN-Revision: 31473	2012-04-25 12:57:29 +00:00
Gabor Juhos	4319d95842	adm5120: make 5GXi depends on CPU_LITTLE_ENDIAN SVN-Revision: 31472	2012-04-25 12:57:26 +00:00
Hauke Mehrtens	e90d3f1663	brcm47xx: A couple of other (inconsequential) BCMA patches Noticed these while reviewing the code. Signed-off-by: Nathan Hintz <nlhintz@hotmail.com> SVN-Revision: 31471	2012-04-24 21:56:42 +00:00
Hauke Mehrtens	b07998cf11	brcm47xx: b44 fix workaround detection on some brcm47xx boards Because of api change of nvram_getenv, the workaround failed to detect the hardware. Based on patch by b.sander Fixes #11268. SVN-Revision: 31470	2012-04-24 20:35:46 +00:00
Jonas Gorski	8a38c62c07	bcm63xx: drop linux 3.2 support SVN-Revision: 31464	2012-04-24 11:49:27 +00:00
Jonas Gorski	77219290e1	bcm63xx: drop linux 3.0 support SVN-Revision: 31463	2012-04-24 11:49:24 +00:00
Jonas Gorski	49de6c1714	bcm63xx: switch kernel to 3.3 SVN-Revision: 31462	2012-04-24 11:49:19 +00:00
Gabor Juhos	59b0c1b2b9	ar71xx: TL-WR741NDv4: add WLAN LED config On TP-Link TL-WR741ND version 4, the WLAN LED must be configured to work. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> SVN-Revision: 31461	2012-04-24 11:38:44 +00:00
Jonas Gorski	8fd383ae2e	kernel: update linux 3.3 to 3.3.3 SVN-Revision: 31460	2012-04-24 09:25:38 +00:00
Jonas Gorski	22b4e6b882	kernel: update linux 3.2 to 3.2.16 SVN-Revision: 31459	2012-04-24 09:25:35 +00:00
Jonas Gorski	7ccf25f7da	kernel: add some more missing kernel config symbols SVN-Revision: 31458	2012-04-24 09:25:32 +00:00
Jo-Philipp Wich	ed957f7c84	enable NF_CONNTRACK_PROCFS for Linux 3.3, required for /proc/net/nf_conntrack (#11339 ) SVN-Revision: 31454	2012-04-24 00:55:57 +00:00
Gabor Juhos	4b6833b176	x86: restore config-default, it is needed for 2.6.39 Reported-by: Thomas Heil <heil@terminal-consulting.de> SVN-Revision: 31452	2012-04-23 16:56:08 +00:00
Gabor Juhos	1ab80c7817	ramips: rt305x: add support for the UR-336UN board Patch-by: Lebedev Dmitry <lebedev@trendnet.ru> SVN-Revision: 31451	2012-04-23 16:56:06 +00:00
Gabor Juhos	3626444c6d	ramips: rt305x: add support for the Asus WL-330N3G board This patch adds support for the ASUS WL-330N3G Comparing to the WL-330N, It have 32MB ram, usb support and a bicolor led. The bi-color led is driven by 2 gpio. I don't know how to handle this, so I simply made 2 leds : one red, one blue. But the red light takes precedence over the blue one according to the chart below. r = led is red b = led is blue 0 = led is off xy= x->r for red, b for blue led, y->value of brightness in /sys/class/leds/x/brughtness initial state action led gpio state r0 b0 r0->r1 r r0 b0 r0 b0 b0->b1 b r0 b1 r1 b0 r1->r0 0 r0 b0 r1 b0 b0->b1 r r1 b1 r1 b1 r1->r0 b r0 b1 r1 b1 b1->b0 r r1 b0 r0 b1 r0->r1 r r1 b1 r0 b1 b1->b0 0 r0 r0 Signed-off-by: Frédéric Leroy <fredo@starox.org> SVN-Revision: 31450	2012-04-23 16:56:05 +00:00
Florian Fainelli	34f4f4a0c5	switch to 3.3 SVN-Revision: 31448	2012-04-23 12:33:30 +00:00
Florian Fainelli	9e054eb21a	add support for 3.3 SVN-Revision: 31447	2012-04-23 12:33:27 +00:00
Florian Fainelli	460ef32930	switch to 3.3.2 SVN-Revision: 31446	2012-04-23 12:33:24 +00:00
Florian Fainelli	5eeee1f80e	add 3.3 support SVN-Revision: 31445	2012-04-23 12:33:19 +00:00
John Crispin	d4f3677cba	Adding wifi eeprom extract for ARV752DPW - Easybox 802 Signed-off-by: Christian Rustmeier <rustmeier a.t. gmail dotty com> SVN-Revision: 31443	2012-04-23 09:40:37 +00:00
Felix Fietkau	dcd185c2f8	ar8216: enable forwarding of multicast frames to the cpu port on ar8327 (thx, SeG) SVN-Revision: 31441	2012-04-22 19:19:49 +00:00
Claudio Mignanti	858a50b41c	flexibity: Cleanup the subtarget config SVN-Revision: 31440	2012-04-22 16:56:10 +00:00
Claudio Mignanti	6cd35fe3d3	tqma9263: update board definition for 3.x series and fix config choose SVN-Revision: 31436	2012-04-22 09:09:53 +00:00
Claudio Mignanti	2852345af0	Remove old netus board definition SVN-Revision: 31435	2012-04-22 09:09:50 +00:00
Gabor Juhos	755b97303e	ep93xx: remove 2.6.39 support SVN-Revision: 31434	2012-04-22 07:20:55 +00:00
Gabor Juhos	631bf82241	amazon: remove 2.6.3{0,2} support SVN-Revision: 31433	2012-04-22 07:20:53 +00:00
Gabor Juhos	96b5d437d6	omap24xx: remove 2.6.38 support SVN-Revision: 31426	2012-04-21 17:16:40 +00:00
Gabor Juhos	76448ed5cf	xburst: remove 2.6.36 support SVN-Revision: 31422	2012-04-21 17:03:10 +00:00
Gabor Juhos	0cdd676554	malta: remove 2.6.39 and 3.0 support SVN-Revision: 31421	2012-04-21 16:56:15 +00:00
Gabor Juhos	0d148cb63b	mpc83xx: remove 2.6.32 support SVN-Revision: 31420	2012-04-21 16:51:59 +00:00
Gabor Juhos	884a4d47f0	octeon: remove 2.6.30 support SVN-Revision: 31419	2012-04-21 16:45:32 +00:00
Gabor Juhos	26b3cdad1c	cns3xxx: remove 2.6.31 support SVN-Revision: 31418	2012-04-21 16:42:05 +00:00
Gabor Juhos	b2b965a696	au1000: remove 2.6.39 support SVN-Revision: 31416	2012-04-21 16:30:40 +00:00
Gabor Juhos	f63d216467	x86: remove 2.6.32 support SVN-Revision: 31415	2012-04-21 16:17:48 +00:00
Gabor Juhos	bc2a7bfa70	ixp4xx: remove 2.6.3{2,8} and 3.0 support SVN-Revision: 31414	2012-04-21 16:17:46 +00:00
Gabor Juhos	50610aa869	linux/2.6.31: R.I.P. SVN-Revision: 31412	2012-04-21 15:18:58 +00:00
Gabor Juhos	2e5d3d2795	linux/2.6.30: R.I.P. SVN-Revision: 31411	2012-04-21 15:18:55 +00:00
Gabor Juhos	c6379f6295	linux: add broken flag to targets which are using 2.6.30 SVN-Revision: 31410	2012-04-21 15:18:54 +00:00
Gabor Juhos	c627479641	linux/3.3: nuke the gpio_buttons patch It is superseded by the in-kernel gpio-keys-polled driver. SVN-Revision: 31409	2012-04-21 14:26:35 +00:00
Gabor Juhos	2d91cb94ac	mpc52xx: nuke 3.2 config SVN-Revision: 31408	2012-04-21 12:36:47 +00:00
Gabor Juhos	0a83f90e21	mpc52xx: switch to 3.3.2 SVN-Revision: 31407	2012-04-21 12:36:45 +00:00
Gabor Juhos	e904724726	mpc52xx: add kernel config for 3.3 SVN-Revision: 31406	2012-04-21 12:36:44 +00:00
Gabor Juhos	5024ffb976	ramips: nuke 3.2 suport SVN-Revision: 31405	2012-04-21 12:30:53 +00:00
Gabor Juhos	6c8ca78067	ramips: switch to 3.3.2 SVN-Revision: 31404	2012-04-21 12:30:51 +00:00
Gabor Juhos	5c325b0057	ramips: add support for 3.3 SVN-Revision: 31403	2012-04-21 12:30:50 +00:00
Gabor Juhos	7f902c962b	ramips: rt305x: add OHCI/EHCI registration code for RT3352 SVN-Revision: 31402	2012-04-21 12:30:48 +00:00
Gabor Juhos	1645928135	ramips: rt305x: fix CPU clock detection on RT3352 SVN-Revision: 31401	2012-04-21 12:30:47 +00:00
Gabor Juhos	fb69e28eaf	ramips: rt305x: use different memory size setup for RT3352 SVN-Revision: 31400	2012-04-21 12:30:45 +00:00
Gabor Juhos	818aeba960	ramips: rt3883: add profile and build sysupgrade image for the RT-N56U SVN-Revision: 31399	2012-04-21 12:30:44 +00:00
Gabor Juhos	6b677e1d22	ramips: add swconfig to the default package list SVN-Revision: 31398	2012-04-21 12:30:43 +00:00
Gabor Juhos	ced031a0b2	ramips: build initramfs image for the Fonera 2.0N SVN-Revision: 31397	2012-04-21 12:30:42 +00:00
Gabor Juhos	fc88a363c0	ramips: rt305x: add initial support for Tenda W306R V2.0 More device info at: http://wiki.openwrt.org/toh/tenda/w306r Signed-off-by: David Pearce <David_18051985@hotmail.com.au> [juhosg: fix checkpatch errors, remove kmod-phy and luci-ssl packages from the profile, change broken GPIO number] SVN-Revision: 31396	2012-04-21 12:30:40 +00:00
Gabor Juhos	88b5827c52	ramips: remove hardcoded console parameter from kernel configs SVN-Revision: 31395	2012-04-21 12:30:30 +00:00
Gabor Juhos	1ffcaae700	linux/3.3: fix crypto4xx build failure SVN-Revision: 31394	2012-04-21 10:47:04 +00:00
Mirko Vogt	87cdc0dd5b	change /etc/config/network according to actual VLAN config to enable LAN port 4 on the ARV4520PW board The VLAN mapping on the ARV4520PW board is the following: port on Router: \| VLAN in software: LAN 1 \| 3 LAN 2 \| 2 LAN 3 \| 1 LAN 4 \| 0 DSL \| 4 So LAN4 is not VLAN4 but VLAN0 (VLAN4 is DSL port) -> set "3 2 1 0 5t" as default switch config. SVN-Revision: 31391	2012-04-21 08:07:21 +00:00
Gabor Juhos	2624d67c08	ppc40x: nuke 3.2 support SVN-Revision: 31387	2012-04-20 21:03:15 +00:00
Gabor Juhos	f4833aa075	ppc40x: switch to 3.3.2 SVN-Revision: 31386	2012-04-20 21:03:14 +00:00
Gabor Juhos	cfe4a6cb93	ppc40x: sync 3.3 config SVN-Revision: 31385	2012-04-20 21:03:12 +00:00
Gabor Juhos	9140d4ee44	ar71xx: remove duplicated AP121 Kconfig entry SVN-Revision: 31382	2012-04-20 16:50:16 +00:00
Gabor Juhos	ef54b5736d	cns21xx: remove 3.2 support SVN-Revision: 31381	2012-04-20 15:25:00 +00:00
Gabor Juhos	e667eb752b	cns21xx: switch to 3.3.2 SVN-Revision: 31380	2012-04-20 15:24:59 +00:00
Gabor Juhos	d1af548557	cns21xx: add support for 3.3 SVN-Revision: 31379	2012-04-20 15:24:57 +00:00
Gabor Juhos	434655d460	linux/3.3: update ARM mach-types SVN-Revision: 31378	2012-04-20 15:24:54 +00:00
Claudio Mignanti	5c33f4e305	Add a missing symbol for config-3.3 Signed-off-by: Claudio Mignanti <c.mignanti@gmail.com> SVN-Revision: 31373	2012-04-20 13:33:04 +00:00
Claudio Mignanti	701309ec11	Reorganize the subtargets, group subtargets per cpu family Signed-off-by: Claudio Mignanti <c.mignanti@gmail.com> SVN-Revision: 31372	2012-04-20 13:33:01 +00:00
Claudio Mignanti	3ac08ca653	Update the kernel to 3.3.x series, remove patches that doesn't apply anymore Signed-off-by: Claudio Mignanti <c.mignanti@gmail.com> SVN-Revision: 31371	2012-04-20 13:32:55 +00:00
Claudio Mignanti	f50231aeb3	Ensure that the bin directory exists before copy the files Signed-off-by: Claudio Mignanti <c.mignanti@gmail.com> SVN-Revision: 31370	2012-04-20 13:27:16 +00:00
Florian Fainelli	147646fc66	remove some annoying warnings and fix snd modules build SVN-Revision: 31365	2012-04-20 13:25:26 +00:00
Florian Fainelli	eadf592371	add missing config symbol SVN-Revision: 31364	2012-04-20 13:25:23 +00:00
Gabor Juhos	da2cc2c79a	ar71xx: nuke 3.2 support SVN-Revision: 31360	2012-04-19 21:32:05 +00:00
Gabor Juhos	9854d6fb7f	ar71xx: switch to 3.3.2 SVN-Revision: 31359	2012-04-19 21:31:58 +00:00
Gabor Juhos	a6b4b5fd6e	ar71xx: sync 3.3 config SVN-Revision: 31358	2012-04-19 21:31:53 +00:00
Gabor Juhos	ef97415b92	ar71xx: merge/reorganize 3.3 patches SVN-Revision: 31357	2012-04-19 21:31:50 +00:00
Gabor Juhos	408de85883	ar71xx: use ap91_pci_init for RB751{,G} SVN-Revision: 31356	2012-04-19 21:31:48 +00:00
Gabor Juhos	0a9832b50d	ar71xx: move USB device registration directly into rb751{,g}_setup SVN-Revision: 31355	2012-04-19 21:31:43 +00:00
Gabor Juhos	78967e6640	ar71xx: add ap9x_pci_get_wmac_data helper SVN-Revision: 31354	2012-04-19 21:31:42 +00:00
Gabor Juhos	5c9ca38e47	ar71xx: add sanity checks to decode_rle Also use -EINVAL instead of -1. SVN-Revision: 31353	2012-04-19 21:31:40 +00:00
Gabor Juhos	8f921175ba	avr32: remove old kernel support SVN-Revision: 31352	2012-04-19 21:23:07 +00:00
Gabor Juhos	80705b9fb1	avr32: switch to 3.3.2 uClibc-0.9.33 causes segfaults at least in iptables. The segfaults are present with 2.6.39 as well, so it makes no sense to stick to that version. SVN-Revision: 31351	2012-04-19 21:23:02 +00:00
Gabor Juhos	abb57ea96f	avr32: sync kernel config SVN-Revision: 31350	2012-04-19 21:22:50 +00:00
Gabor Juhos	3108a4bb4b	avr32: fix atomic64_t related kernel build errors SVN-Revision: 31349	2012-04-19 21:22:48 +00:00
Florian Fainelli	26b3c31634	switch to 3.2.15 SVN-Revision: 31345	2012-04-18 15:36:33 +00:00
Florian Fainelli	2e641b13c0	fix 335-mips-kexec patch for all 3+ kernels SVN-Revision: 31344	2012-04-18 15:36:30 +00:00
Jonas Gorski	d0bfc67e2e	kernel: x86: also update subtarget kernel versions SVN-Revision: 31338	2012-04-17 21:01:43 +00:00
Jonas Gorski	a8f2bc682e	kernel: also update the targets to use 3.2.15 Thanks Gabor for spotting it. SVN-Revision: 31337	2012-04-17 13:12:14 +00:00
Jonas Gorski	3a9b6dc313	kernel: update linux 3.3 to 3.3.2 SVN-Revision: 31336	2012-04-17 12:51:02 +00:00
Jonas Gorski	ee4c47a134	kernel: update linux 3.2 to 3.2.15 SVN-Revision: 31335	2012-04-17 12:50:54 +00:00
Jo-Philipp Wich	cfe30549a1	don't overwrite version.mk, substitute REVISION instead SVN-Revision: 31327	2012-04-17 09:31:16 +00:00
Jo-Philipp Wich	a0f0213462	bump to Linux v3.3.1 SVN-Revision: 31314	2012-04-16 15:04:47 +00:00
Jo-Philipp Wich	9d11e3395a	Fix bufferbloat in PPPoATM TX queue Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> SVN-Revision: 31313	2012-04-16 15:04:45 +00:00
Jo-Philipp Wich	2036c23faa	Update ppp TX restart patch to avoid race condition Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> SVN-Revision: 31312	2012-04-16 15:04:44 +00:00
John Crispin	83948d6385	adds 3.3 patches and files SVN-Revision: 31307	2012-04-16 12:31:48 +00:00
Florian Fainelli	fb2b2b958e	backport missing platform data members for gpio-keys SVN-Revision: 31306	2012-04-16 12:09:15 +00:00
Florian Fainelli	e4f3867650	backport a missing eeprom 93cx6 define for building rt2x00 SVN-Revision: 31305	2012-04-16 12:09:13 +00:00
Florian Fainelli	db728b6583	add missing debugging symbols SVN-Revision: 31302	2012-04-16 11:38:35 +00:00
Florian Fainelli	bb7cea7e65	add missing debugging symbols SVN-Revision: 31301	2012-04-16 11:38:33 +00:00
Florian Fainelli	c0ca7aed8e	mark set but unused variables as such SVN-Revision: 31296	2012-04-15 18:53:48 +00:00
Florian Fainelli	a70ad13a79	refresh 2.6.32 patches SVN-Revision: 31295	2012-04-15 18:53:45 +00:00
Florian Fainelli	47c8473475	refresh 2.6.32 patches SVN-Revision: 31294	2012-04-15 18:53:42 +00:00
Florian Fainelli	f2f5820d13	silence an annoying x86 warning SVN-Revision: 31293	2012-04-15 18:53:39 +00:00
Hauke Mehrtens	eb2191f5b0	at91: Missing kernel config symbols for AT91 target platform I looked into buildbot snapshots and noticed that some platforms have not successfully compiled for a long time. One example is at91, which seems to be missing device-related kernel config symbols and the snapshot build crashes already there. Please find attached a patch that makes the at91 kernel config and build to succeed again. Signed off by: hannu.nyman@iki.fi SVN-Revision: 31288	2012-04-15 09:50:51 +00:00
Hauke Mehrtens	7475bb3dc6	brcm47xx: fix a bug in the sprom handling of bcma, this broke all bcma based SoCs. bcma: use fallback sprom if no on chip sprom is available SVN-Revision: 31285	2012-04-14 12:12:22 +00:00
Hauke Mehrtens	62f0c3793b	kernel: refresh patches SVN-Revision: 31279	2012-04-13 19:37:15 +00:00
Hauke Mehrtens	6af575967c	kernel: update bcma and ssb to version master-2012-04-12 from wireless-testing SVN-Revision: 31278	2012-04-13 19:35:40 +00:00
Hauke Mehrtens	c75e700d42	brcm47xx: remove support for kernel 3.0 SVN-Revision: 31276	2012-04-13 16:53:16 +00:00
Felix Fietkau	99768ccb7c	ixp4xx: add support for linux 3.3.1 SVN-Revision: 31275	2012-04-13 13:38:49 +00:00
Felix Fietkau	ec667208e6	kernel: fix arm compressed images build on mac os x SVN-Revision: 31274	2012-04-13 13:38:45 +00:00
Jo-Philipp Wich	93b8648b15	don't overwrite version.mk, substitute REVISION instead SVN-Revision: 31271	2012-04-13 10:47:45 +00:00
Jo-Philipp Wich	4b230e19fc	PATCH: Disable console terminal in Grub for alix2 target The alix2 target has the VGA console for grub enabled by default. This prevents the grub menu from appearing on bootup. It is disabled by default for the other embedded x86 platforms. This patch corrects that behavior for the alix2 target. Signed-off-by: Adam Gensler <openwrt@kristenandadam.net> SVN-Revision: 31270	2012-04-12 23:30:27 +00:00
Jo-Philipp Wich	3cb72f38fd	populate repositories.conf from version.mk SVN-Revision: 31268	2012-04-12 23:08:13 +00:00
John Crispin	e3889bcf7c	update 3.2 patches sync with lantiq kernel series SVN-Revision: 31260	2012-04-12 12:33:56 +00:00
Jo-Philipp Wich	60a708edf1	remove preconfig variables SVN-Revision: 31257	2012-04-12 09:43:43 +00:00
Jo-Philipp Wich	d558632955	remove preconfig variables SVN-Revision: 31256	2012-04-12 09:43:41 +00:00
Jo-Philipp Wich	fcfdbd4961	add missing Kernel symbol spotted by buildbot SVN-Revision: 31232	2012-04-10 10:09:27 +00:00
Imre Kaloz	ed5abd5e4a	add missing symbols SVN-Revision: 31231	2012-04-09 17:03:02 +00:00
Jonas Gorski	50eba35cd3	kernel: update linux 3.3 to 3.3.1 SVN-Revision: 31223	2012-04-09 14:48:56 +00:00
Jonas Gorski	16b4cbcdd6	kernel: update linux 3.2 to 3.2.14 SVN-Revision: 31222	2012-04-09 14:48:51 +00:00
Jonas Gorski	1a57b05f47	kernel: add some more additional missing config symbols for 3.2 and 3.3 SVN-Revision: 31221	2012-04-09 14:48:46 +00:00
Mirko Vogt	b0971e69f2	level up target xburst to linux kernel version 3.2.1 Thanks to the qi-hardware project - especially to Lars, Maarten and Xiangfu SVN-Revision: 31218	2012-04-08 12:09:52 +00:00
Gabor Juhos	f14fd53e3c	ar71xx: image: build initramfs images for the WHR boards SVN-Revision: 31209	2012-04-06 06:45:08 +00:00
Gabor Juhos	e295a077ce	ar71xx: initial support for Mikrotik RB751G-2HnD and RB751U-2HnD Great collaboration on these two fantastic routers on the openwrt forum: https://forum.openwrt.org/viewtopic.php?id=32320 Above all kudos to aryufan. Well done and thank you everyone else who contributed. To-Do: LED for wlan is not yet activated To-Do: TxPower over 20dBm (RB751U) or 22dBm (RB751G) are not accepted by the router Signed-off-by: Hanno Schupp <hanno.schupp@gmail.com> [juhosg: fix line wrapped patch, fix checkpatch errors, add missing kernel patches] SVN-Revision: 31208	2012-04-06 06:45:07 +00:00
Gabor Juhos	fe6d66afe2	ar71xx: add rb750 to diag.sh Support status led in diag.sh for RB750 Patch from: Evangelos Arkalis <arkalis.e@gmail.com> SVN-Revision: 31207	2012-04-06 06:45:04 +00:00
John Crispin	da3f3f8f9d	add Easybox 802 - ARV752DPW Implements the ARV752DPW architecture in mach-arv.c Signed-off-by: Christian Rustmeier <rustmeier@gmail.com> SVN-Revision: 31206	2012-04-05 20:03:21 +00:00
John Crispin	94af65db49	enable usb on dgn3500 A power-enable toggle gpio is not available, it is always on and protected with a resettable fuse. Signed-off-by: Pieter Voorthuijsen<p.voorthuijsen at gmail.com> SVN-Revision: 31205	2012-04-05 20:03:19 +00:00
Florian Fainelli	b545c4b4fe	generic: use magic_long in sysupgrade Signed-off-by: Matthias Bücher <mail@maddes.net> SVN-Revision: 31200	2012-04-04 16:06:29 +00:00
Florian Fainelli	930a820172	update wrt350nv2-builder to v2.4 and use new functionality for target orion_generic Signed-off-by: Matthias Bücher <mail@maddes.net> SVN-Revision: 31199	2012-04-04 16:06:25 +00:00
Florian Fainelli	b47fc0f936	add support for D-Link DNS-323 this patch adds support for D-Link DNS323 storage device. You can find more info here: http://dns323.lukaperkov.net/ Currently you need serial cable to flash OpenWrt on DNS-323. Signed-off-by: Luka Perkov < openwrt ->-to->- lukaperkov.net > SVN-Revision: 31198	2012-04-04 15:53:55 +00:00
Florian Fainelli	90e89bf4a9	add missing DM/MD config symbols SVN-Revision: 31197	2012-04-04 15:53:52 +00:00
Florian Fainelli	152f38a615	fix typos in adm5120 switch driver (#4241 ) SVN-Revision: 31196	2012-04-04 15:53:15 +00:00
Florian Fainelli	09ade17a15	add Edimax specific MAGIC_MAC_BASE to read MAC from flash (#4241 ] SVN-Revision: 31195	2012-04-04 15:53:12 +00:00
Florian Fainelli	b180e0fb3b	fix support for 2.6.38 kernel This patch fixes the following issues I encountered while compiling kernel 2.6.38.8 for my Omnima Embedded Controller/Edimax BR6104KP: - kernel comes up with machine selection during build, even though everything was properly set in menuconfig - USB api changes Successfully built and tested with r29755. Signed-off-by: Hartmut Knaack <knaack.h [at] gmx.de> SVN-Revision: 31194	2012-04-04 15:53:09 +00:00
Florian Fainelli	f087e07b5c	refresh 2.6.38 patches SVN-Revision: 31193	2012-04-04 15:53:07 +00:00
Florian Fainelli	db04bcb8e7	fix gcc-4.6 set but unused warnings SVN-Revision: 31192	2012-04-04 15:53:04 +00:00
Florian Fainelli	30f0cb476f	refresh patches SVN-Revision: 31191	2012-04-04 15:53:01 +00:00
Jonas Gorski	d87efd8c3c	kernel: update linux 3.2 to 3.2.13 and refresh patches Also remove a duplicate patch from lantiq (already in generic). SVN-Revision: 31158	2012-04-01 07:56:55 +00:00
Jonas Gorski	1a395bd290	kernel: add some more missing kernel symbols for 3.2 and 3.3 SVN-Revision: 31157	2012-04-01 07:56:49 +00:00
Jonas Gorski	400ab1802f	kernel: add some more missing serial 8250 config symbols SVN-Revision: 31149	2012-03-30 08:11:01 +00:00
Jo-Philipp Wich	e9c4d3d1f2	ramips: add support for the ARC FreeStation5 board, also fix WCR-150GN network setup while we're at it - thanks Pau Escrich <p4u@dabax.net> for the implementation SVN-Revision: 31144	2012-03-29 16:03:04 +00:00
Hauke Mehrtens	de0527a354	brcm47xx: fix memory leak, backport from the mainline kernel SVN-Revision: 31143	2012-03-29 15:44:06 +00:00
Hauke Mehrtens	9992ce3a51	brcm47xx: add missing breaks into the nvram read code in the switch case statements SVN-Revision: 31142	2012-03-29 15:43:16 +00:00
Felix Fietkau	5f87ce9150	kernel: restore ebtables functionality by running netfilter hooks when the ebtables module is loaded SVN-Revision: 31141	2012-03-29 14:15:54 +00:00
Jonas Gorski	f7df1eafc4	bcm63xx: enable bcm6368 for linux 3.3 and build images Only build bcm6368 images when building for linux 3.3. SVN-Revision: 31133	2012-03-28 20:42:37 +00:00
Jonas Gorski	c7ae2fccb6	bcm63xx: add initial support for bcm6368 boards SVN-Revision: 31132	2012-03-28 20:42:34 +00:00
Jonas Gorski	68f268a5eb	bcm63xx: add driver for the internal hw trng on bcm6368 SVN-Revision: 31131	2012-03-28 20:42:30 +00:00
Jonas Gorski	78fb818f7c	bcm63xx: replace SPI driver with latest upstream version SVN-Revision: 31130	2012-03-28 20:42:25 +00:00
Jonas Gorski	a2adca6ee9	bcm63xx: add ethernet support for bcm6368 Add basic support for the internal ethernet switch on bcm6368. It behaves as a dumb switch for now, but allows basic connectivity. Also drop the ethernet patch for bcm6345 for now, it needs rework. SVN-Revision: 31129	2012-03-28 20:42:20 +00:00
Jonas Gorski	0876972850	bcm63xx: add missing bits from extirq support Add missing external IRQ code parts for older chips in the new code. SVN-Revision: 31128	2012-03-28 20:42:15 +00:00
Jonas Gorski	44d546290a	bcm63xx: reorder patches Reorder patches for a clearer distinction between the purposes of the different patches. SVN-Revision: 31127	2012-03-28 20:42:09 +00:00
Hauke Mehrtens	13b6ec1d05	brcm47xx: update flash drivers SVN-Revision: 31126	2012-03-28 17:03:18 +00:00
Mirko Vogt	0ad9a02b9b	Revert commit 31091 - "[target/xburst] remove set but unused variable which leads into compiling errors with GCC >= 4.6.0" 'set-but-unused-variable'-issues are dealt with in a generic way now SVN-Revision: 31124	2012-03-28 15:28:21 +00:00
Mirko Vogt	b4508ce183	deal with 'set-but-unused-variables' in a more generic way SVN-Revision: 31123	2012-03-28 15:28:13 +00:00
Hauke Mehrtens	2f6e19e203	brcm47xx: BCMA - Consolidate/reduce code in bcma_device_name Eliminate unneeded procedure by incorporating code into bcma_device_name Signed-off-by: Nathan Hintz <nlhintz@hotmail.com> SVN-Revision: 31120	2012-03-28 09:36:50 +00:00
Hauke Mehrtens	a31a9b8650	brcm47xx: BCMA - Always map 4 bytes This probably doesn't matter, but reads/writes are always 4 bytes, so always map 4 bytes. Changes since v1: Moved changes to new patch file (234-bcma-always-map-4-bytes.patch). Signed-off-by: Nathan Hintz <nlhintz@hotmail.com> SVN-Revision: 31119	2012-03-28 09:35:01 +00:00
Gabor Juhos	b77217d963	ar71xx: boost SPI flash read performance mtd_speedtest results: page read speed old new delta DB120 929 KiB/s 2597 KiB/s +179.55% TL-WR1043ND v1 754 KiB/s 2166 KiB/s +187.27% TL-WR703N v1 745 KiB/s 2176 KiB/s +192.08% TL-MR3220 v1 752 KiB/s 2154 KiB/s +186.44% TL-WR2543ND v1 564 KiB/s 2130 KiB/s +277.66% TL-WR741ND v2 525 KiB/s 1767 KiB/s +236.57% ALFA-AP96 702 KiB/s 1977 KiB/s +181.62% WNDR3700 697 KiB/s 1965 KiB/s +181.92% SVN-Revision: 31118	2012-03-27 19:38:17 +00:00
Gabor Juhos	102c6df148	ar71xx: improve SPI flash read/write performance mtd_speedtest results: page write speed old new delta DB120 209 KiB/s 226 KiB/s +8.13% TL-WR1043ND v1 122 KiB/s 148 KiB/s +21.31% TL-WR703N v1 153 KiB/s 194 KiB/s +26.80% TL-MR3220 v1 130 KiB/s 156 KiB/s +20.00% TL-WR2543ND v1 158 KiB/s 202 KiB/s +27.85% TL-WR741ND v2 122 KiB/s 152 KiB/s +24.59% ALFA AP96 229 KiB/s 260 KiB/s +13.54% WNDR3700 202 KiB/s 223 KiB/s +10.40% page read speed old new delta DB120 691 KiB/s 929 KiB/s +34.44% TL-WR1043ND v1 372 KiB/s 754 KiB/s +102.69% TL-WR703N v1 375 KiB/s 745 KiB/s +98.67% TL-MR3220 v1 372 KiB/s 752 KiB/s +102.15% TL-WR2543ND v1 307 KiB/s 564 KiB/s +83.71% TL-WR741ND v2 315 KiB/s 525 KiB/s +66.67% ALFA AP96 515 KiB/s 702 KiB/s +36.31% WNDR3700 515 KiB/s 697 KiB/s +35.34% SVN-Revision: 31117	2012-03-27 19:38:15 +00:00
Gabor Juhos	6455178a6a	ar71xx: image: build initramfs images for more boards SVN-Revision: 31116	2012-03-27 19:38:13 +00:00
Gabor Juhos	e2bd975a2a	ar71xx: image: add MkuImage{Gzip,Lzma}/initramfs helpers SVN-Revision: 31115	2012-03-27 19:38:11 +00:00
Gabor Juhos	c7966a12b5	ar71xx: image: pass mtdlayout variables by value SVN-Revision: 31114	2012-03-27 19:38:10 +00:00
Gabor Juhos	692e47f49f	ar71xx: image: use MkuImageGzip in Image/Build/AthGzip/initramfs SVN-Revision: 31113	2012-03-27 19:38:08 +00:00
Gabor Juhos	6cd5fb7001	ar71xx: remove the built-in MTD map of the AP96 board Pass the mtd_layout via the kernel command line instead. SVN-Revision: 31112	2012-03-27 19:38:07 +00:00
Gabor Juhos	61ee283899	ar71xx: remove the built-in MTD map of the PB92 board Pass the mtd_layout via the kernel command line instead SVN-Revision: 31111	2012-03-27 19:38:05 +00:00
Gabor Juhos	1094dc1996	ar71xx: remove the built-in MTD map of the Zcomax devices Pass the mtd_layout via the kernel command line instead. SVN-Revision: 31110	2012-03-27 19:38:04 +00:00
Gabor Juhos	24554ef187	ar71xx: reclaim the 'user_property' partition on WHR-* boards SVN-Revision: 31109	2012-03-27 19:38:02 +00:00
Gabor Juhos	87e4ec687b	ar71xx: remove the built-in MTD maps of several boards We are passing the MTD layout via the kernel command line, so it makes no sense to duplicate it in mach-* files. The patch removes the built-in MTD maps of the following boards: * AP113 * ALFA N2/N5 * DIR-600 * DIR-615 * DIR-825 * TEW-6{3,5}2BRP * TEW-673GRU * WHR-G301N * WHR-HP-GN * WHR-HP-G300N SVN-Revision: 31108	2012-03-27 19:38:01 +00:00
Gabor Juhos	e6b685650b	ar71xx: use modules for LED triggers SVN-Revision: 31107	2012-03-27 19:37:59 +00:00
Gabor Juhos	e28cd648b7	ar71xx: disable CONFIG_{I2C,SPI}_GPIO SVN-Revision: 31104	2012-03-27 19:37:53 +00:00
Gabor Juhos	6627f45a87	ar71xx: sync 3.3 config SVN-Revision: 31103	2012-03-27 19:37:52 +00:00
Gabor Juhos	f4d1e3d147	ar71xx: fix button polarity on TL-WR703N and TL-WR741N v4 SVN-Revision: 31102	2012-03-27 19:37:51 +00:00
Gabor Juhos	d495277d9f	ramips: rt305x: build image for the DIR-615 rev D boards Patch from #10105. SVN-Revision: 31101	2012-03-27 19:29:59 +00:00
Gabor Juhos	e4e24c5512	ramips: rt305x: add add support for the Asus WL-330N board [juhosg: reorder several lines in order to keep things sorted alphabetically] Signed-off-by: Frédéric Leroy <fredo@starox.org> SVN-Revision: 31100	2012-03-27 19:29:57 +00:00
Florian Fainelli	af2c5df66a	ppp: Fix high softirq utilization with pppoa Users of the Geos platform are reporting high CPU utilization. This seems to be rooted in a problem with the TX queue restart in PPP. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> SVN-Revision: 31096	2012-03-27 17:47:44 +00:00
Florian Fainelli	8de1475a27	add missing INET_UDP_DIAG symbol SVN-Revision: 31095	2012-03-27 17:47:41 +00:00
Florian Fainelli	60e195d399	geos: add 'tc' and kmod-sched for bonding The Geos2 includes 2 ADSL+ interfaces, and as such it needs to have the TEQL scheduler for bonding. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> SVN-Revision: 31094	2012-03-27 17:47:37 +00:00
Hauke Mehrtens	a5abb08100	brcm47xx: update sprom patches like they are in the mainline kernel SVN-Revision: 31093	2012-03-27 17:07:28 +00:00
Mirko Vogt	ed8902d686	remove set but unused variable which leads into compiling errors with GCC >= 4.6.0 SVN-Revision: 31091	2012-03-27 16:29:19 +00:00
Hauke Mehrtens	6fd915ba37	brcm47xx: update usb driver to the version send for mainline kernel integartion SVN-Revision: 31089	2012-03-27 15:38:56 +00:00
Felix Fietkau	5f799a0e97	ath9k: make endian check optional Turns out it triggers on some AR71xx devices where no swapping should be done. Enable endian check for the lantiq target. SVN-Revision: 31084	2012-03-27 13:21:53 +00:00
John Crispin	b982e8166b	cleanup atheros wifi handling Signed-off-by: Andrej Vlašić <andrej.vlasic0@gmail.com> Signed-off-by: Luka Perkov <openwrt@lukaperkov.net> SVN-Revision: 31064	2012-03-25 08:50:38 +00:00
John Crispin	5ea100c39b	cleanup image makefile SVN-Revision: 31063	2012-03-25 08:50:32 +00:00
John Crispin	f27c030141	update /etc/uci-defaults/* SVN-Revision: 31062	2012-03-25 08:50:30 +00:00
John Crispin	ba4a7fca7b	update profiles SVN-Revision: 31061	2012-03-25 08:50:27 +00:00
John Crispin	0f6a9d5c7c	bump kernel to 3.2.12 SVN-Revision: 31060	2012-03-25 08:50:09 +00:00
John Crispin	f35b9a9a4c	fixes breakage introduced in 776722ce36ac95877efb7fd771dde2f6ffc96433 SVN-Revision: 31054	2012-03-22 13:07:34 +00:00
Jens Muecke	1d2b19c4bf	Disable keyboard for x86 default config - revoke patch 30966 This was already fixed by commit 30309 and is part of generic x86 target. SVN-Revision: 31052	2012-03-21 19:10:02 +00:00
Gabor Juhos	ff5b7ef713	linux: refresh patches against 3.3 SVN-Revision: 31047	2012-03-20 15:55:07 +00:00
Gabor Juhos	32e4801fb0	linux/3.{2,3}: yet another missing NET_VENDOR symbol SVN-Revision: 31045	2012-03-20 15:55:04 +00:00
Gabor Juhos	c8bf90d414	ar71xx: fix IRQ number for the AR7240 OHCI controller SVN-Revision: 31044	2012-03-20 15:02:48 +00:00
Jo-Philipp Wich	bf96743548	base-files: gracefully handle empty variables in preinit (#11155 ) SVN-Revision: 31030	2012-03-19 20:37:12 +00:00
Gabor Juhos	c1dc6df8bd	kernel: update linux 3.2 to 3.2.12 SVN-Revision: 31028	2012-03-19 18:23:31 +00:00
Gabor Juhos	f86e412389	ar71xx: disable unused file system drivers in the nand subtarget SVN-Revision: 31027	2012-03-19 15:57:07 +00:00
Gabor Juhos	b50cfe077c	ar71xx: sync kernel configs SVN-Revision: 31026	2012-03-19 15:57:06 +00:00
Gabor Juhos	8a2e4b49de	ar71xx: add initial support for RB750GL SVN-Revision: 31025	2012-03-19 15:57:04 +00:00
Gabor Juhos	d19f3dd512	ar71xx: make rb750_latch_change 'static void' SVN-Revision: 31024	2012-03-19 15:57:03 +00:00
Gabor Juhos	5348f46c80	ar71xx: add latch_change field to rb750_led_platform_data SVN-Revision: 31023	2012-03-19 15:57:01 +00:00
Gabor Juhos	8a471efe01	ar71xx: add platform data for the RB750 NAND driver SVN-Revision: 31022	2012-03-19 15:56:59 +00:00
Imre Kaloz	cb41fa7655	upgrade to 3.2, disable ppp by default until we figure out why ppp_generic breaks bootup SVN-Revision: 31020	2012-03-19 11:27:34 +00:00
Imre Kaloz	3fd38d99f2	add missing Kconfig symbols SVN-Revision: 31019	2012-03-19 11:26:15 +00:00
Gabor Juhos	e89df99083	ar71xx: use a different pll value on DB120 SVN-Revision: 31018	2012-03-19 11:11:22 +00:00
Gabor Juhos	e9b45ebaba	ar71xx: add AR934x specific interface speed setup for ge0 SVN-Revision: 31017	2012-03-19 11:11:20 +00:00
Gabor Juhos	6028889727	ar71xx: remove static MTD maps from AP121/DB120 boards SVN-Revision: 31016	2012-03-19 11:11:19 +00:00
Felix Fietkau	db6e326c56	targets: replace madwifi in profiles with ath5k, madwifi is unmaintained SVN-Revision: 31015	2012-03-19 09:58:13 +00:00
Gabor Juhos	6ac12fbb3c	ar71xx: use AR8327 on the DB120 board SVN-Revision: 31012	2012-03-18 22:06:58 +00:00
Gabor Juhos	faf82f3e10	generic: ar8216: add support for the AR8327 chip SVN-Revision: 31011	2012-03-18 22:06:55 +00:00
Gabor Juhos	fa7a83df4b	generic: ar8216: allow to use more ports SVN-Revision: 31010	2012-03-18 22:06:51 +00:00
Gabor Juhos	2ddbcb98ee	generic: ar8216: reorder chip specific functions SVN-Revision: 31009	2012-03-18 22:06:48 +00:00
Gabor Juhos	552cffd97a	generic: ar8216: reorder switch_dev specific functions SVN-Revision: 31008	2012-03-18 22:06:45 +00:00
Gabor Juhos	71e356029e	generic: ar8216: use ar8216_sw_ prefix for switchdev related functions SVN-Revision: 31007	2012-03-18 22:06:42 +00:00
Gabor Juhos	9a01936724	generic: ar8216: use switch_dev->ports in for loops SVN-Revision: 31006	2012-03-18 22:06:40 +00:00
Gabor Juhos	2ce9e4753c	generic: ar8216: add read_port_status field to ar8xxx_chip SVN-Revision: 31005	2012-03-18 22:06:39 +00:00
Gabor Juhos	01cad79e03	generic: ar8216: add init_globals field to ar8xxx_chip SVN-Revision: 31004	2012-03-18 22:06:36 +00:00
Gabor Juhos	56cacb3b21	generic: ar8216: add caps field to ar8xxx_chip SVN-Revision: 31003	2012-03-18 22:06:33 +00:00
Gabor Juhos	d1c585d4b1	generic: ar8216: add vtu_load_vlan field to ar8xxx_chip SVN-Revision: 31002	2012-03-18 22:06:30 +00:00
Gabor Juhos	332310fba2	generic: ar8216: add vtu_flush field to ar8xxx_chip SVN-Revision: 31001	2012-03-18 22:06:26 +00:00
Gabor Juhos	d964410cbc	generic: ar8216: add init_port field to ar8xxx_chip SVN-Revision: 31000	2012-03-18 22:06:23 +00:00
Gabor Juhos	006b3b846e	generic: ar8216: add setup_port field to ar8xxx_chip SVN-Revision: 30999	2012-03-18 22:06:19 +00:00
Gabor Juhos	eb5f0067b6	generic: ar8216: add hw_init field to ar8xxx_chip SVN-Revision: 30998	2012-03-18 22:06:15 +00:00
Gabor Juhos	a8371ad566	generic: ar8216: add a separate structure for chip specific stuff Also add a hw_init function into that. SVN-Revision: 30997	2012-03-18 22:06:12 +00:00
Gabor Juhos	d18133b32d	generic: ar8216: rename chip field of struct ar8216 SVN-Revision: 30996	2012-03-18 22:06:08 +00:00
Gabor Juhos	6e143e467f	generic: ar8216: move ar8216_id_chip function Also remove the inline annotation. SVN-Revision: 30995	2012-03-18 22:06:05 +00:00
Gabor Juhos	1c99979b2c	generic: ar8216: rename ar8216_ops to ar8216_sw_ops SVN-Revision: 30994	2012-03-18 22:06:03 +00:00
Jo-Philipp Wich	884f964e62	alix2: add require crypto kmods (#10410 ) SVN-Revision: 30980	2012-03-18 18:56:02 +00:00
Gabor Juhos	36e9a33df7	cns21xx: build uImage for the NS-K330 SVN-Revision: 30974	2012-03-18 12:07:56 +00:00
Gabor Juhos	89babcf633	cns21xx: remove 2.6.3x support SVN-Revision: 30973	2012-03-18 12:07:51 +00:00
Gabor Juhos	776172531f	cns21xx: switch to 3.2.9 SVN-Revision: 30972	2012-03-18 12:07:50 +00:00
Gabor Juhos	6dbe40f7d4	cns21xx: add support for 3.2 SVN-Revision: 30971	2012-03-18 12:07:48 +00:00
Jens Muecke	deac1c16a1	Enable keyboard for x86 This is required for qemu like descripted in here http://wiki.openwrt.org/doc/howto/qemu SVN-Revision: 30966	2012-03-17 21:32:08 +00:00
Felix Fietkau	7b609a31be	kernel: improve profiling support, keep static symbols when profiling is enabled SVN-Revision: 30964	2012-03-17 13:03:14 +00:00
Florian Fainelli	9b60eb478a	remove support for old kernels SVN-Revision: 30963	2012-03-17 11:55:59 +00:00
Florian Fainelli	a2a18fe1ea	switch to 3.2 SVN-Revision: 30962	2012-03-17 11:55:56 +00:00
Florian Fainelli	6e2c0fbe9f	add support for 3.2 SVN-Revision: 30961	2012-03-17 11:55:53 +00:00
Florian Fainelli	9ef8de0e0a	add some more missing symbols SVN-Revision: 30960	2012-03-17 11:55:49 +00:00
Gabor Juhos	f601339e79	ar71xx: add profile and generate image for the JA76PF2 board SVN-Revision: 30958	2012-03-16 18:00:40 +00:00
Gabor Juhos	6036151187	ar71xx: add support for the jjPlus JA76PF2 board SVN-Revision: 30957	2012-03-16 18:00:34 +00:00
Gabor Juhos	a680662391	ar71xx: change LED name prefix on the jjplus boards SVN-Revision: 30956	2012-03-16 18:00:26 +00:00
Gabor Juhos	90279757bb	mpc52xx: switch to 3.2.9 SVN-Revision: 30955	2012-03-16 15:35:00 +00:00
Felix Fietkau	dd0f928b14	kernel: optimize out remaining netfilter hooks in the bridging code if bridge filtering is disabled SVN-Revision: 30954	2012-03-16 09:21:59 +00:00
Felix Fietkau	b957208807	swconfig: use a mutex instead of a spinlock, many swconfig calls sleep SVN-Revision: 30952	2012-03-15 19:32:31 +00:00
Felix Fietkau	404a4c1fcd	ar8216: fix a MTU related regression Switch reset on AR8316 appears to clobber the MTU configuration register and possibly other global config registers. Move global configuration register init writes back to the reset callback. SVN-Revision: 30951	2012-03-15 16:57:27 +00:00
Gabor Juhos	c00b53f3d0	ar71xx: move micrel PHY driver to the generic linux target SVN-Revision: 30946	2012-03-15 09:25:53 +00:00
Gabor Juhos	0011804302	linux/3.3: build mdio_register_board_info into the kernel if PHYLIB is selected SVN-Revision: 30945	2012-03-15 09:25:49 +00:00
Gabor Juhos	eb096bca59	linux/3.2: build mdio_register_board_info into the kernel if PHYLIB is selected SVN-Revision: 30944	2012-03-15 09:25:47 +00:00
Hauke Mehrtens	cee31ca238	brcm47xx: add support for NAND flash on devices using bcma This patch add support for the NAND flash on BCM5357 based devices like the WNR3500Lv2. Thank you Tathagata Das <tathagata@alumnux.com> for the patch SVN-Revision: 30943	2012-03-14 22:59:39 +00:00
Hauke Mehrtens	7fee567dc0	brcm47xx: move and rename the patches The patches are now grouped by the part what they are doing and are using three digest numbers. This does not remove or adds anything SVN-Revision: 30942	2012-03-14 21:48:23 +00:00
Jonas Gorski	fab5be9b4f	lantiq: load dwc_otg early Needed for using external rootfs on usb sticks. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> SVN-Revision: 30940	2012-03-14 10:59:52 +00:00
Gabor Juhos	e3af7c82f8	generic: ar8216: merge multiple if statements in ar8216_hw_apply SVN-Revision: 30928	2012-03-13 17:33:12 +00:00
Gabor Juhos	6a57a1fbdb	imagebuilder: fix parallel building (closes #11117 ) SVN-Revision: 30927	2012-03-13 17:29:40 +00:00
Gabor Juhos	ff909edf94	ar71xx: ag71xx: fix ARP frame reception on AR934x switch ports SVN-Revision: 30926	2012-03-13 17:29:38 +00:00
Gabor Juhos	cd6a4cde13	ar71xx: ag71xx: start aneg on switch PHYs after reset SVN-Revision: 30925	2012-03-13 17:29:37 +00:00
Gabor Juhos	7c9534cfd7	ar71xx: ag71xx: poll PHY status of all available switch ports SVN-Revision: 30924	2012-03-13 17:29:36 +00:00
Gabor Juhos	8449eecf5f	ar71xx: ag71xx: allow to use port 5 of the AR934x built-in switch SVN-Revision: 30923	2012-03-13 17:29:34 +00:00
Gabor Juhos	1c5ac02a29	ar71xx: reset the switch on AR934x before ethernet device registration SVN-Revision: 30922	2012-03-13 17:29:33 +00:00
Gabor Juhos	17d3131d3c	ar71xx: fix a typo in ar71xx_regs.h SVN-Revision: 30921	2012-03-13 17:29:31 +00:00
Florian Fainelli	07486c4d96	remove udc patch since it is unused SVN-Revision: 30920	2012-03-13 14:06:44 +00:00
Felix Fietkau	b387cfd6e4	kernel: bypass all netfilter hooks if the sysctls for that functionality have been disabled - eliminates the overhead of enabling CONFIG_BRIDGE_NETFILTER in the kernel config SVN-Revision: 30917	2012-03-13 10:06:45 +00:00
Gabor Juhos	66df117d1b	ar71xx: use a dummy callback for interfaces with fixed speed SVN-Revision: 30913	2012-03-12 20:38:58 +00:00
Gabor Juhos	8b2b37ae58	ar71xx: merge ar934x_bo_ddr_flush patch SVN-Revision: 30912	2012-03-12 20:38:57 +00:00
Gabor Juhos	b0bb0793b9	ar71xx: enable UART function for early_printk/console SVN-Revision: 30909	2012-03-12 17:32:39 +00:00
Gabor Juhos	727a8c20c0	linux/3.3: refresh patches against 3.3-rc7 SVN-Revision: 30908	2012-03-12 17:32:38 +00:00
Gabor Juhos	18f7081e17	ramips: rt305x: add profile for the AZtech HW-5503G board Patch from #11085. SVN-Revision: 30907	2012-03-12 17:29:06 +00:00
Gabor Juhos	fdb175f909	linux/3.3: allow to set platform_data for phy devices SVN-Revision: 30906	2012-03-12 16:28:01 +00:00
Gabor Juhos	1f79bfec0b	linux/3.2: allow to set platform_data for phy devices SVN-Revision: 30905	2012-03-12 16:28:00 +00:00
Gabor Juhos	2c2c288a3c	linux/3.3: add missing config symbol SVN-Revision: 30904	2012-03-12 16:27:58 +00:00
Gabor Juhos	ccc939ebc0	ar71xx: remove a 3.3 patch, it is already in 3.3-rc7 SVN-Revision: 30903	2012-03-12 16:27:57 +00:00
Gabor Juhos	0814e61841	ar71xx: fix Compex WPE72 detection SVN-Revision: 30902	2012-03-12 16:27:56 +00:00
Gabor Juhos	0f77d0b2ba	ramips: add RT3350 detection SVN-Revision: 30900	2012-03-12 16:12:13 +00:00
Jo-Philipp Wich	2dedd94d66	expose CONFIG_NETFILTER_NETLINK for external kmods SVN-Revision: 30894	2012-03-12 00:09:23 +00:00
Gabor Juhos	05d3f559f5	ramips: rt305x: rewrite SoC detection SVN-Revision: 30890	2012-03-11 19:05:59 +00:00
Gabor Juhos	8cf8ee8f9d	ramips: rt305x: rename SYSTEM_CONFIG_* defines to RT305X_SYSCFG_* SVN-Revision: 30889	2012-03-11 19:05:57 +00:00
Gabor Juhos	acb4ad86e5	ramips: replace RALINK_SOC_* macros with global variables SVN-Revision: 30888	2012-03-11 19:05:56 +00:00
Gabor Juhos	8cff770eb3	ramips: introduce ramips_soc_prom_init and move SoC detection into that SVN-Revision: 30887	2012-03-11 19:05:53 +00:00
Gabor Juhos	2149facb53	generic: ar8216: use usleep_range in ar8216_mii_{read,write} msleep(1) can sleep for up to 20ms. SVN-Revision: 30885	2012-03-11 17:19:14 +00:00
Gabor Juhos	77d0a8ca85	generic: ar8216: add a helper function for writing PHY debug registers SVN-Revision: 30884	2012-03-11 16:49:35 +00:00
Gabor Juhos	dad19ac8b2	generic: ar8216: add lockep assertion to ar8216_rmw SVN-Revision: 30883	2012-03-11 16:49:33 +00:00
Gabor Juhos	6c51c47962	ramips: build initramfs image for DIR-{3,6}00 boards SVN-Revision: 30882	2012-03-11 16:39:31 +00:00
Gabor Juhos	f400a9cdd9	linux/3.3: show correct name for MIPS 24KEc in /proc/cpuinfo SVN-Revision: 30881	2012-03-11 16:39:30 +00:00
Gabor Juhos	c9d71c8387	linux/3.2: show correct name for MIPS 24KEc in /proc/cpuinfo SVN-Revision: 30880	2012-03-11 16:39:28 +00:00
Gabor Juhos	4e15457e0e	ramips: allow to use DSP ASE on RT3xxx SVN-Revision: 30879	2012-03-11 16:39:26 +00:00
Gabor Juhos	088dd4e879	ar71xx: stop image building if a loader is missing SVN-Revision: 30877	2012-03-11 14:03:28 +00:00
Hauke Mehrtens	067a065305	brcm47xx: make patch apply SVN-Revision: 30876	2012-03-11 13:36:46 +00:00
Hauke Mehrtens	7dcdf69388	brcm47xx: BCMA - Find names of non BCM cores Signed-off-by: Nathan Hintz <nlhintz@hotmail.com> SVN-Revision: 30875	2012-03-11 12:55:20 +00:00
Hauke Mehrtens	d6d40b2d60	BCMA - Account for variable PCI memory base/size Thank you Nathan Hintz for the patch SVN-Revision: 30874	2012-03-11 12:52:43 +00:00
Hauke Mehrtens	bbf739a59f	BCMA - Reorder SPROM fill The SPROM is initialized in bcm47xx_fill_sprom, so move the call to bcm47xx_fill_sprom_ethernet after it. Signed-off-by: Nathan Hintz <nlhintz@hotmail.com> SVN-Revision: 30873	2012-03-11 11:50:59 +00:00
Gabor Juhos	1ad06d4c3a	generic: ar8216: coding style cleanup SVN-Revision: 30857	2012-03-08 10:21:14 +00:00
Gabor Juhos	e2d3cb69a1	generic: ar8216: don't use static variable in ar8236_hw_init SVN-Revision: 30856	2012-03-08 10:21:12 +00:00
Gabor Juhos	291e2dd583	generic: ar8216: move register inititalization into hw_init SVN-Revision: 30855	2012-03-08 10:21:11 +00:00
Gabor Juhos	e3538fa852	generic: ar8216: set chip type directly in ar8216_id_chip SVN-Revision: 30854	2012-03-08 10:21:10 +00:00
Gabor Juhos	a6c69e63b6	generic: ar8216: simplify ar8216_config_init SVN-Revision: 30853	2012-03-08 10:21:08 +00:00
Gabor Juhos	31584880bf	ar71xx: add watchdog driver to the default package list SVN-Revision: 30852	2012-03-08 09:00:17 +00:00
Gabor Juhos	127a2b1a4d	linux/3.{2,3}: even more NAND symbols SVN-Revision: 30850	2012-03-07 22:32:54 +00:00
Gabor Juhos	2d89fa7f43	ar71xx: fix WPS button polarity on TL-WR2543N SVN-Revision: 30849	2012-03-07 19:50:53 +00:00
Gabor Juhos	52a89cd95c	generic: ar8216: move port initialization into a separate function SVN-Revision: 30848	2012-03-07 16:32:46 +00:00
Gabor Juhos	0097cf7161	generic: ar8216: improve ar8216_wait_bit function SVN-Revision: 30847	2012-03-07 16:32:45 +00:00
Gabor Juhos	2370828599	generic: ar8216: use ar8216_read_port_link to get the CPU port link parameters SVN-Revision: 30846	2012-03-07 16:32:43 +00:00
Gabor Juhos	d8a8df51ca	generic: ar8216: use the generic get_port_link implementation SVN-Revision: 30845	2012-03-07 16:32:42 +00:00
Gabor Juhos	215e07177e	generic: rtl8367: use the generic get_port_link implementation SVN-Revision: 30844	2012-03-07 16:32:40 +00:00
Gabor Juhos	9e1be3b809	generic: rtl8366s: use the generic get_port_link implementation SVN-Revision: 30843	2012-03-07 16:32:38 +00:00
Gabor Juhos	e2f0264afe	generic: rtl8366rb: use the generic get_port_link implementation SVN-Revision: 30842	2012-03-07 16:32:37 +00:00
Gabor Juhos	c455a0f7be	ar71xx: ag71xx: fix get_port_link callback SVN-Revision: 30841	2012-03-07 16:32:35 +00:00
Gabor Juhos	5a83b3a5c7	ar71xx: ag71xx: use the generic get_port_link implementation SVN-Revision: 30840	2012-03-07 16:32:34 +00:00
Gabor Juhos	759c341e68	generic: swconfig: add a generic get_port_link implementation SVN-Revision: 30839	2012-03-07 16:32:33 +00:00
Gabor Juhos	fc9db6f410	generic: ar8216: use mdiobus_write in ar8236_hw_init SVN-Revision: 30838	2012-03-07 16:32:31 +00:00
Gabor Juhos	7112130105	generic: ar8216: use bus->mdio_lock directly in ar8216_mii_{read,write} SVN-Revision: 30837	2012-03-07 16:32:30 +00:00
Gabor Juhos	a31e090255	generic: ar8216: fix phy driver name SVN-Revision: 30836	2012-03-07 16:32:28 +00:00
Jo-Philipp Wich	9a047b52d4	enable EFI partition support by default, adds ca. 8K uncompressed on ar71xx (#8672 ) SVN-Revision: 30835	2012-03-07 14:14:52 +00:00
Gabor Juhos	f03e7f2c7a	linux/3.2: fix crypto4xx build failure SVN-Revision: 30834	2012-03-07 11:57:49 +00:00
Gabor Juhos	43a20aa4c6	linux/3.1: add missing NAND symbols SVN-Revision: 30827	2012-03-05 18:01:54 +00:00
Gabor Juhos	bdcbf426ee	linux/3.0: add missing NAND symbols SVN-Revision: 30826	2012-03-05 18:01:52 +00:00
Florian Fainelli	1029786936	remove 3.1 support SVN-Revision: 30823	2012-03-05 16:50:42 +00:00
Florian Fainelli	75b5f4a6b4	rename 96348GW-1{0,1}-gen to 96348GW-1{0,1}-generic SVN-Revision: 30822	2012-03-05 14:49:34 +00:00
Florian Fainelli	c327915156	generate generic images for BCM96358VW and BCM96358VW2 (#10666 ) SVN-Revision: 30821	2012-03-05 14:49:31 +00:00
Florian Fainelli	ca1e59660e	wire bcm96348gw-10 reset button (#10854 ) SVN-Revision: 30820	2012-03-05 14:23:45 +00:00
Florian Fainelli	631a035a76	Merge branch 'bcm63xx' SVN-Revision: 30819	2012-03-05 13:29:54 +00:00
Felix Fietkau	63a1a106fb	kernel: fix powerpc unused-but-set variables SVN-Revision: 30817	2012-03-05 00:51:12 +00:00
Felix Fietkau	8821950069	kernel: remove the crtsavres dependency, the patched gcc will no longer emit references to that code SVN-Revision: 30816	2012-03-05 00:51:08 +00:00
Felix Fietkau	e308da91e7	kernel: fix vmalloc stack traces triggered by module with an empty init section (mostly happens on x86) SVN-Revision: 30813	2012-03-05 00:12:44 +00:00
Gabor Juhos	4b408b69ce	linux/3.3: add more NAND symbols SVN-Revision: 30811	2012-03-04 18:23:59 +00:00
Gabor Juhos	991cd3db2c	linux/3.2: add more NAND symbols SVN-Revision: 30810	2012-03-04 18:23:56 +00:00
Gabor Juhos	0e486d2fd2	ramips: add support for unbranded XDX-RN502J board This patch adds support for routers using a PCB marked XDX-RN502J V2.0, such as some unbranded routers like this: http://www.mediafire.com/?8acv87h6snn9fj6 http://www.mediafire.com/?do7xonw7scor4kn http://www.mediafire.com/?1ad49zvx3e7jyix http://www.mediafire.com/?i46cqiq66maa197 http://www.aliexpress.com/product-fm/516397994-Free-Shipping-300M-3G-WAN-Wireless-N-WiFi-USB-AP-Router-2-Antennas-wholesalers.html some reports also state the Aceex 22Y uses the same board. more information can be found in the following openwrt forum post https://forum.openwrt.org/viewtopic.php?id=34878 [juhosg: fix checkpatch warnings, use the GENERIC_4M template] Signed-off-by: bruno schwander <bruno@tinkerbox.org> SVN-Revision: 30809	2012-03-04 16:09:13 +00:00
Gabor Juhos	44c8b396f9	ramips: board support for Asus RT-N10+ [juhosg: fix indentation in platform scripts, and remove debug messages from 06_set_iface_mac] Signed-off-by: Patrick van Staveren <trick@vanstaveren.us> SVN-Revision: 30808	2012-03-04 16:09:11 +00:00
Gabor Juhos	be4e5a29a9	ppc40x: preliminary support for 3.3 SVN-Revision: 30804	2012-03-04 12:39:46 +00:00
Gabor Juhos	4daa2c31dc	linux/3.3: add missing config symbols SVN-Revision: 30803	2012-03-04 12:39:44 +00:00
Gabor Juhos	01832303ff	linux/3.2: add missing NAND symbols SVN-Revision: 30802	2012-03-04 12:39:42 +00:00
Gabor Juhos	86d852927e	ar71xx: refresh patches against 3.3-rc5 SVN-Revision: 30801	2012-03-03 14:10:29 +00:00
Gabor Juhos	da628121b0	linux/3.3: merge recent ubifs patches from 3.2 SVN-Revision: 30800	2012-03-03 14:10:27 +00:00
Gabor Juhos	419d9e2f54	linux/3.3: refresh patches against 3.3-rc5 SVN-Revision: 30799	2012-03-03 14:10:24 +00:00
Felix Fietkau	d5ec28c734	omap24xx: fix compile error with new binutils (#11072 ) SVN-Revision: 30798	2012-03-03 12:00:48 +00:00
Gabor Juhos	632db63ed0	linux/3.2: add symlink xattr support to ubifs SVN-Revision: 30794	2012-03-02 23:09:00 +00:00
Gabor Juhos	5202e9908b	linux/3.2: add XZ decompression support to ubifs SVN-Revision: 30793	2012-03-02 23:08:59 +00:00
Gabor Juhos	b8bc1eca45	linux/3.2: add XZ decompressor support to crypto SVN-Revision: 30792	2012-03-02 23:08:56 +00:00
Gabor Juhos	5a471e23ad	ppc40x: switch to 3.2.9 SVN-Revision: 30791	2012-03-02 18:04:02 +00:00
Gabor Juhos	ec9fd1f7a8	linux/3.2: add a bunch of missing symbols SVN-Revision: 30790	2012-03-02 18:04:01 +00:00
Gabor Juhos	b98f798df4	ppc40x: fix build errors in the CF and ISP116X drivers SVN-Revision: 30789	2012-03-02 18:03:59 +00:00
Florian Fainelli	dcbeaed9a0	mark variables as might be unused SVN-Revision: 30787	2012-03-02 13:23:38 +00:00
Florian Fainelli	2dc1c8ac70	remove unused variables and defines SVN-Revision: 30786	2012-03-02 13:23:35 +00:00
Florian Fainelli	7f88380664	MIPS: fix kexec build on 64-bits targets SVN-Revision: 30785	2012-03-02 13:19:13 +00:00
Florian Fainelli	c31b597763	refresh patches SVN-Revision: 30784	2012-03-02 13:19:10 +00:00
Florian Fainelli	90481d9b3a	MIPS: fix printing of size_t arg SVN-Revision: 30783	2012-03-02 13:19:08 +00:00
Florian Fainelli	112d6c7b74	MIPS: mark unused variables SVN-Revision: 30782	2012-03-02 13:19:05 +00:00
Florian Fainelli	c203860016	refresh patches SVN-Revision: 30781	2012-03-02 13:19:02 +00:00
Florian Fainelli	0d3f5b980e	MIPS: mark unused variables SVN-Revision: 30780	2012-03-02 13:19:00 +00:00
Florian Fainelli	b8f7592a92	refresh patches SVN-Revision: 30779	2012-03-02 13:18:56 +00:00
Florian Fainelli	cd3b60c14c	MIPS: mark unused variables SVN-Revision: 30778	2012-03-02 13:18:53 +00:00
Florian Fainelli	c25f266680	refresh patches SVN-Revision: 30777	2012-03-02 13:18:47 +00:00
Gabor Juhos	7052847972	ar71xx: ag71xx: keep VLAN tags if VLAN is not enabled SVN-Revision: 30768	2012-03-01 19:49:05 +00:00
Gabor Juhos	9698a499b6	kernel: update linux 3.2 to 3.2.9 SVN-Revision: 30767	2012-03-01 19:49:02 +00:00
Hauke Mehrtens	12537aa190	brcm47xx: use kernel 3.2 by default SVN-Revision: 30751	2012-02-28 20:12:46 +00:00
Jo-Philipp Wich	e5b04d57ef	revert unrelated change in previous commit SVN-Revision: 30738	2012-02-27 09:34:31 +00:00
Jo-Philipp Wich	47b27500cf	partly revert r30708, it breaks various arches SVN-Revision: 30737	2012-02-27 09:33:36 +00:00
Gabor Juhos	72599f0c61	ramips: don't read RAMIPS_RX_CALC_IDX0 register in the loop SVN-Revision: 30733	2012-02-26 10:54:13 +00:00
Gabor Juhos	100f76a010	ramips: raeth: add rx_info structure This helps to reduce code size on RX path: add/remove: 0/0 grow/shrink: 3/1 up/down: 68/-56 (12) function old new delta ramips_eth_open 1104 1144 +40 ramips_ring_free 212 232 +20 ramips_eth_stop 400 408 +8 ramips_eth_rx_hw 648 592 -56 SVN-Revision: 30732	2012-02-26 10:54:12 +00:00
Gabor Juhos	32e7b1c7d9	ramips: raeth: add tx_info structure This helps to reduce code size on TX path: add/remove: 0/0 grow/shrink: 1/4 up/down: 56/-92 (-36) function old new delta ramips_eth_open 1048 1104 +56 ramips_eth_tx_housekeeping 156 148 -8 ramips_ring_free 224 212 -12 ramips_eth_stop 420 400 -20 ramips_eth_hard_start_xmit 480 428 -52 SVN-Revision: 30731	2012-02-26 10:54:10 +00:00
Felix Fietkau	8b91bad57e	ixp4xx: fix a compile error SVN-Revision: 30728	2012-02-25 22:12:11 +00:00
Jo-Philipp Wich	fe66f30aae	add some missing 2.6.39 kernel symbols observed on x86/generic builds SVN-Revision: 30718	2012-02-25 13:17:32 +00:00
Jo-Philipp Wich	bafdae9233	enable RTC_CLASS for Linux 3.2 and 3.3 SVN-Revision: 30717	2012-02-25 13:06:26 +00:00
Gabor Juhos	30143b715c	ramips: raeth: don't process disabled interrupts Also rename the 'fe_int' variable. SVN-Revision: 30713	2012-02-25 11:59:19 +00:00
Gabor Juhos	6b37484883	ar71xx: use v6.0.0 in UBTN-XM firmwares (closes #11038 ) SVN-Revision: 30712	2012-02-24 20:41:38 +00:00
Gabor Juhos	6990f66861	ramips: fix FONERA20N image generation SVN-Revision: 30710	2012-02-24 16:18:46 +00:00
Jo-Philipp Wich	74db55a982	config: deprecated symbol CONFIG_LEDS_GPIO_PLATFORM CONFIG_LEDS_GPIO_PLATFORM went away a while ago. http://git.kernel.org/?p=linux/kernel/git/stable/linux-stable.git;a=commit;h=2bcc7ed5b83b0a59c6976476e8788675038fb11b Also, most platforms comment out CONFIG_LEDS_GPIO but not x86 for some reason. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> SVN-Revision: 30708	2012-02-24 10:35:20 +00:00
Gabor Juhos	9afeeae65e	ramips: image: increase minimum kernel partition size to 896k SVN-Revision: 30706	2012-02-23 19:58:16 +00:00
Gabor Juhos	7089b5213e	ramips: image: cleanup and sort templates/profiles SVN-Revision: 30705	2012-02-23 19:58:15 +00:00
Gabor Juhos	c8718a220b	ramips: image: use GENERIC_4M template for the ALL0256N board SVN-Revision: 30704	2012-02-23 19:58:14 +00:00
Gabor Juhos	507c7d30f5	ramips: image: introduce mkmtd/{,phys,spi} helpers SVN-Revision: 30703	2012-02-23 19:58:12 +00:00
Gabor Juhos	5f63ea18aa	ramips: image: pass mtdlayout variables by value SVN-Revision: 30702	2012-02-23 19:58:11 +00:00
Gabor Juhos	49e53c06b9	ramips: image: merge F5D8235V{1,2} templates SVN-Revision: 30701	2012-02-23 19:58:10 +00:00
Gabor Juhos	00e7277a4c	ramips: image: use generic template for the WR6202, OMNIEMB, W502U boards SVN-Revision: 30700	2012-02-23 19:58:07 +00:00
Gabor Juhos	554010d55b	ramips: image: introduce mkcmdline helper SVN-Revision: 30699	2012-02-23 19:58:06 +00:00
Gabor Juhos	32c6d63acf	ramips: image: use the GENERIC_4M template for the V11ST-FE board SVN-Revision: 30698	2012-02-23 19:58:04 +00:00
Gabor Juhos	ab65053cf0	ramips: image: simplify Makefile a bit SVN-Revision: 30697	2012-02-23 19:58:03 +00:00
Gabor Juhos	9017fce3a2	ramips: image: add MkImageLzma wrapper SVN-Revision: 30696	2012-02-23 19:58:02 +00:00
Gabor Juhos	c9d8f471fc	ramips: image: allow to build board specific initramfs images SVN-Revision: 30695	2012-02-23 19:58:01 +00:00
John Crispin	b168535b10	drop backported patches as they cause regressions and oopses SVN-Revision: 30690	2012-02-23 07:42:04 +00:00
John Crispin	e5798d7c9b	fixes etop locking issue SVN-Revision: 30689	2012-02-23 07:42:00 +00:00
Gabor Juhos	c0974b46a5	ramips: merge identical switch configuration entries SVN-Revision: 30688	2012-02-22 19:46:19 +00:00
Gabor Juhos	a9101a144c	ramips: use unified switch identifiers in uci-defaults/network SVN-Revision: 30687	2012-02-22 19:46:17 +00:00
Gabor Juhos	b6522f372f	ramips: fix VLAN config of the RT-N15 SVN-Revision: 30686	2012-02-22 19:46:15 +00:00
Gabor Juhos	a18a821733	ramips: raeth: show interrupt statistics in debugfs SVN-Revision: 30681	2012-02-22 13:06:44 +00:00
Gabor Juhos	214216c04d	ramips: raeth: add debugfs support SVN-Revision: 30680	2012-02-22 13:06:42 +00:00
Gabor Juhos	c1e4d709fa	ramips: raeth: rename main source file SVN-Revision: 30679	2012-02-22 13:06:41 +00:00
Gabor Juhos	5e6bc97d0c	ramips: raeth: add missing Kconfig and Makefile SVN-Revision: 30671	2012-02-21 09:44:30 +00:00
Gabor Juhos	3ba0f4e1ca	ramips: move the ethernet driver into a separate directory Also clean up the Kconfig symbols. SVN-Revision: 30670	2012-02-21 09:26:43 +00:00
Gabor Juhos	a6d904b1d6	ramips: rename the spi driver SVN-Revision: 30669	2012-02-21 09:26:41 +00:00
Felix Fietkau	c918810414	ar71xx: switch to kmod-gpio-button-hotplug SVN-Revision: 30660	2012-02-20 10:51:48 +00:00
Felix Fietkau	058d331a39	kernel: strip unnecessary symbol table information from kernel modules, reduces default squashfs size on ar71xx by about 4k SVN-Revision: 30657	2012-02-20 09:03:17 +00:00
Gabor Juhos	dd001a4b0f	ramips: rt3883: make rt3883_nand_data visible SVN-Revision: 30655	2012-02-19 19:40:37 +00:00
Gabor Juhos	62f213eab9	ramips: merge 3.2 fixes SVN-Revision: 30652	2012-02-19 17:52:23 +00:00
Gabor Juhos	18fdaee00b	ramips: nuke 2.6.39 support SVN-Revision: 30651	2012-02-19 17:52:20 +00:00
Gabor Juhos	e2ea72515f	ramips: rt305x: nuke built-in MTD partition maps SVN-Revision: 30650	2012-02-19 17:52:15 +00:00
Gabor Juhos	de6405c898	ramips: rt288x: nuke built-in MTD partition maps SVN-Revision: 30649	2012-02-19 17:52:11 +00:00
Gabor Juhos	e7f59b9326	ramips: build sysupgrade image for the V11ST-FE board SVN-Revision: 30648	2012-02-19 17:52:08 +00:00
Gabor Juhos	3489515a7e	ramips: rt305x: add support for the Skyline SL-R7205 Wireless 3G router [juhosg: - don't switch back to 2.6.39 - update config-3.2 - change machine id to SL-R7205 - reorder case entries in platform scripts - remove button hotplug script] Signed-off-by: Haipoh Teoh <hpteoh@ceedtec.com> SVN-Revision: 30645	2012-02-19 16:44:49 +00:00
Hauke Mehrtens	5dec9dd3b2	brcm47xx: add code to generate images for some netgear devices This is commented out until we get report of working devices. SVN-Revision: 30639	2012-02-18 23:21:47 +00:00
Hauke Mehrtens	1122b231f9	brcm47xx: sprom for nvram parsing This adds support for parsing sprom form nvram for sprom version form 1 to 9. It also adds sprom from nvram support for devices on the bcma bus. SVN-Revision: 30638	2012-02-18 23:08:26 +00:00
Gabor Juhos	990ed96a2a	ralink: rt3883: disable the 2GHz band on the RT-N56U SVN-Revision: 30632	2012-02-18 17:36:21 +00:00
Gabor Juhos	5710530c41	ramips: rt3883: make rt3883_wlan_data visible SVN-Revision: 30631	2012-02-18 17:36:16 +00:00
Gabor Juhos	799e9cbec8	generic: add disable_[25]ghz to struct rt2x00_platform_data SVN-Revision: 30630	2012-02-18 17:36:13 +00:00
Gabor Juhos	3d20de331d	ar71xx: fix image signature for UBNT-XM boards SVN-Revision: 30626	2012-02-18 14:45:52 +00:00
Gabor Juhos	383008635a	generic/2.6.37: fix 'set but unused' build errors on MIPS SVN-Revision: 30615	2012-02-17 17:21:03 +00:00
Gabor Juhos	e17a3ffbbd	ramips: extract eeprom for the built-in wlan module on the RT-N56U SVN-Revision: 30604	2012-02-16 20:06:22 +00:00
Gabor Juhos	dabca24361	ramips: rt3883: change eeprom file name SVN-Revision: 30603	2012-02-16 20:06:21 +00:00
Vasilis Tsiligiannis	eed8e2a4fd	Disable by default padding of images SVN-Revision: 30590	2012-02-16 17:54:07 +00:00
Vasilis Tsiligiannis	8676e49d9d	Allow gzipping of squashfs images with padded jffs2 partition SVN-Revision: 30589	2012-02-16 17:54:04 +00:00
Vasilis Tsiligiannis	ab09db09fc	GZip only ext4 and padded images SVN-Revision: 30588	2012-02-16 17:54:01 +00:00
Vasilis Tsiligiannis	b4f51343c6	Make gzipping of images configurable via menuconfig SVN-Revision: 30587	2012-02-16 17:53:57 +00:00
Gabor Juhos	3004f30f01	ar71xx: remove duplicated define from the D-Link profile SVN-Revision: 30577	2012-02-16 09:03:27 +00:00
Gabor Juhos	00d963999d	ramips: select HW_HAS_PCI on per-board basis SVN-Revision: 30576	2012-02-16 08:17:54 +00:00
Gabor Juhos	fc967295ec	ramips: rt3883: remove a stray character from rt3883.h SVN-Revision: 30575	2012-02-16 08:17:53 +00:00
Gabor Juhos	b4af07d5c0	ramips: rt288x: don't register the PCI controller on each board SVN-Revision: 30574	2012-02-16 08:17:52 +00:00
Gabor Juhos	f8a56dc8df	ramips: raeth: separate ring allocation and setup SVN-Revision: 30573	2012-02-16 08:17:50 +00:00
Gabor Juhos	d186c17aa6	generic: add SND_PPC symbol SVN-Revision: 30572	2012-02-16 07:51:44 +00:00
Daniel Dickinson	1bb8a7613e	Add Ubiquiti UniFi Profile; It's an AP without USB so don't include USB drivers by default SVN-Revision: 30571	2012-02-16 07:45:28 +00:00
Daniel Dickinson	b797f72319	d-link: Add DIR-601 Profile Definition; It needs different factory images than DIR-600 SVN-Revision: 30570	2012-02-16 07:38:33 +00:00
Daniel Dickinson	c736e2d4b0	Fix partitions for Cameo-based boards; kernel 3.2 is bigger SVN-Revision: 30569	2012-02-16 07:29:26 +00:00
Daniel Dickinson	4685a51301	image: For Cameo-based board fix adding mtd layout to kernel commandline) SVN-Revision: 30568	2012-02-16 07:24:45 +00:00
Jo-Philipp Wich	8dc1ff6cb1	linux 3.2: missing generic symbols These symbols are dependent on CONFIG_PCI being enabled. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> SVN-Revision: 30565	2012-02-15 23:37:47 +00:00
Gabor Juhos	49fc54be3d	ramips: rt288x: fix PCI resource conflict SVN-Revision: 30563	2012-02-15 21:19:02 +00:00
Florian Fainelli	37f8c19028	correct PCI IO/Mem resource swapping SVN-Revision: 30562	2012-02-15 21:13:21 +00:00
Florian Fainelli	3ceebbba14	add Ralink V11ST-FE board support This board is equipped with: - 4MB of NOR Flash - 32MB of SDRAM - IC+ IP175C switch - one Mini-PCI slot SVN-Revision: 30561	2012-02-15 21:13:11 +00:00
Gabor Juhos	8b8d9a8336	ramips: raeth: add a helper function for skb allocation SVN-Revision: 30555	2012-02-15 18:33:42 +00:00
Gabor Juhos	e57546de83	ramips: raeth: use netdev_alloc_skb SVN-Revision: 30554	2012-02-15 18:33:41 +00:00
Gabor Juhos	064855314b	ramips: raeth: add '__packed __aligned(4)' annotation to dma descritor structures This helps GCC to generare more efficient code. SVN-Revision: 30553	2012-02-15 18:33:40 +00:00
Gabor Juhos	8c95385d78	ramips: raeth: use 're' instead of 'priv' everywhere SVN-Revision: 30552	2012-02-15 18:33:38 +00:00
Gabor Juhos	b3b79365f3	ramips: raeth: force link down in ramips_phy_stop SVN-Revision: 30550	2012-02-15 13:47:52 +00:00
Gabor Juhos	3e7b461431	ramips: raeth: serialize ramips_link_adjust calls SVN-Revision: 30549	2012-02-15 13:47:50 +00:00
Gabor Juhos	dcb13d4098	ramips: raeth: add PHYLIB support SVN-Revision: 30547	2012-02-15 06:47:12 +00:00
John Crispin	23b2bd9494	linux-atm: update solos-pci driver to upstream Fixes for the solos-pci driver. - Corrects calculation of headroom for padding. - Removes pointless debug messages. - Expose Bis A and Bis M annex capabilities. - Expose hardware revision. Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com> SVN-Revision: 30541	2012-02-14 20:11:24 +00:00
John Crispin	9e5b8ad833	linux-atm: headroom/padding fixes Submitted upstream to netdev by Chas Williams on linux-atm. Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com> SVN-Revision: 30540	2012-02-14 20:11:22 +00:00
John Crispin	1a71f07d00	generate uboot environment data in target With this patch it is possible to generate uboot environment config file inside lantiq target. Currently it is only supporting GIGASX76X board. uboot environment config is used by fw_printenv fw_setenv tools. Signed-off-by: Luka Perkov <openwrt@lukaperkov.net> SVN-Revision: 30537	2012-02-14 19:07:11 +00:00
John Crispin	7416a5f0aa	fix compile error in previous commit SVN-Revision: 30534	2012-02-14 19:07:05 +00:00
John Crispin	cd1a204365	Support booting the Speedport W502V using BRN-BOOT. While the disadvantage is less available flash space, it's easy and safe to flash without opening the device. Going back to the original firmware is also possible. This patch add two firmware utilities, mkbrncmdline and mkbrnboot. mkbrncmdline patches the uncompressed kernel so the registeres a0 to a3 are initialized and the memory size is passed in. mkbrnboot takes the lzma compressed kernel and squashfs images and creates a firmware image that can be flashed using the BRN-BOOT recovery kernel, which is booted by holding both buttons when powering up the device and will listen on http://192.168.2.1. The firmware file from bin/lantiq/ to use is openwrt-lantiq-danube-ARV4525PW-BRNDTW502-brnImage The BRN-BOOT recovery kernel does size-check the image, so if it's too big to fit into flash it will complain accordingly. A second patch is needed to make the wired network interface work since there is no u-boot to pre-initialise it. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 30532	2012-02-14 17:48:04 +00:00
Gabor Juhos	02a01a16c7	ramips: extract eeprom for the PCIe wlan module on the RT-N56U SVN-Revision: 30529	2012-02-14 17:32:45 +00:00
Gabor Juhos	43d1a2c3ab	ramips: rt3883: enable PCI on the RT-N56U board SVN-Revision: 30528	2012-02-14 17:32:44 +00:00
Gabor Juhos	784be92e39	ramips: rt3883: add PCI support SVN-Revision: 30527	2012-02-14 17:32:42 +00:00
Gabor Juhos	10f00dc48b	ramips: rt3883: sync 2.6.39 config SVN-Revision: 30526	2012-02-14 17:32:41 +00:00
Gabor Juhos	ed79921fe5	ramips: use SoC specific irq.h SVN-Revision: 30525	2012-02-14 17:32:40 +00:00
John Crispin	0b07769898	fixes irq locking in ethernet driver SVN-Revision: 30522	2012-02-14 15:05:58 +00:00
John Crispin	55bf39e98c	fixes gpio_export patch SVN-Revision: 30521	2012-02-14 15:05:57 +00:00
John Crispin	976d3eb854	add annex selection support to ltq_dsl package SVN-Revision: 30518	2012-02-14 15:05:49 +00:00
Gabor Juhos	9a0e17857e	ar71xx: add profile and build image for the TP-Link TL-WR842N/ND v1 boards SVN-Revision: 30508	2012-02-13 17:11:58 +00:00
Gabor Juhos	1c57a22aae	ar71xx: add model detection for TL-WR842N/ND SVN-Revision: 30507	2012-02-13 17:11:57 +00:00
Florian Fainelli	e16916480d	update to 3.2 SVN-Revision: 30503	2012-02-13 16:05:30 +00:00
Florian Fainelli	7bed2e2225	fix titan gpio register size SVN-Revision: 30502	2012-02-13 16:05:27 +00:00
Gabor Juhos	8d5dfa75e6	ramips: rt3883: update package list in the default profile SVN-Revision: 30499	2012-02-13 15:18:05 +00:00
Gabor Juhos	99c019fb0d	ramips: add preliminary support for the Asus RT-N56U board SVN-Revision: 30498	2012-02-13 15:18:04 +00:00
Gabor Juhos	97e641a0e6	ramips: raeth: enable MDIO code for RT3883 SVN-Revision: 30497	2012-02-13 15:18:03 +00:00
Gabor Juhos	e532fa5fd4	ramips: add preliminary support for the RT3662/RT3883 SoCs SVN-Revision: 30495	2012-02-13 15:17:59 +00:00
Florian Fainelli	4a0dc3a32a	add support for 3.2 SVN-Revision: 30492	2012-02-13 12:36:34 +00:00
Hauke Mehrtens	30408f1cc4	brcm47xx: deactivate CONFIG_NO_HZ as it seams not to be needed. SVN-Revision: 30488	2012-02-12 22:41:20 +00:00
Hauke Mehrtens	e7bd7f7e85	brcm47xx: activate config bug to show warnings SVN-Revision: 30487	2012-02-12 22:40:01 +00:00
Gabor Juhos	22ec8b4839	ramips: use GENERIC_{4,8}M image template for WR5123GN SVN-Revision: 30483	2012-02-12 18:04:47 +00:00
Gabor Juhos	b7f129e19b	ramips: rt305x: pass MTD partition map to the ALL0256N via cmdline SVN-Revision: 30482	2012-02-12 18:04:46 +00:00
Hauke Mehrtens	fa21aef5ab	brcm47xx: refresh patches SVN-Revision: 30481	2012-02-12 16:45:27 +00:00
Hauke Mehrtens	838c363886	brcm47xx: update usb driver for brcm47xx. SVN-Revision: 30480	2012-02-12 16:38:10 +00:00
Gabor Juhos	a287c60a61	ramips: add initial support for 3.2 SVN-Revision: 30476	2012-02-12 12:52:14 +00:00
Gabor Juhos	388013b0ce	ramips: include 'linux/module.h' in the ramips_spi driver SVN-Revision: 30475	2012-02-12 12:52:13 +00:00
Gabor Juhos	faae4235c4	ramips: rt288x: remove per-board physmap_flash_data instances SVN-Revision: 30474	2012-02-12 12:52:12 +00:00
Gabor Juhos	3502e2b93f	ramips: rt305x: remove per-board physmap_flash_data instances SVN-Revision: 30473	2012-02-12 12:52:10 +00:00
Imre Kaloz	143e861708	enable another l2 cache errate on newer kernels SVN-Revision: 30472	2012-02-12 11:22:08 +00:00
Gabor Juhos	3a11dcdaa8	ramips: load gpio-polled keys module SVN-Revision: 30463	2012-02-11 20:37:34 +00:00
Gabor Juhos	323ece9474	ramips: remove yet another CONFIG_MTD_PARTITION ifdef SVN-Revision: 30462	2012-02-11 19:37:11 +00:00
Gabor Juhos	32b9e8c750	ramips: use gpio-keys-polled instead of gpio-buttons SVN-Revision: 30461	2012-02-11 19:37:06 +00:00
Imre Kaloz	8ce80f7454	add some missing symbols SVN-Revision: 30460	2012-02-11 18:38:28 +00:00
Gabor Juhos	80b40497de	ramips: add MIPS platform file SVN-Revision: 30459	2012-02-11 18:16:11 +00:00
Gabor Juhos	80a535ba58	generic/2.6.39: refresh patches SVN-Revision: 30458	2012-02-11 18:16:08 +00:00
Imre Kaloz	440a7fbc3b	refresh patches to -rc3 SVN-Revision: 30456	2012-02-11 17:43:06 +00:00
Gabor Juhos	4e1b870f3e	ramips: add MDIO bus support for RT288X SVN-Revision: 30455	2012-02-11 16:49:56 +00:00
Imre Kaloz	0ace4636db	rename 3.1 patches directory as it will be used for newer kernels as well SVN-Revision: 30454	2012-02-11 15:59:23 +00:00
Imre Kaloz	1fb5ff4e04	rename 2.6.39 patches directory SVN-Revision: 30453	2012-02-11 15:58:14 +00:00
Gabor Juhos	34a9ccf544	ramips: fix Belkin F5D8235-v2 VLAN setup Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 30452	2012-02-11 15:31:18 +00:00
Gabor Juhos	8916c02b47	ramips: raeth: make debugging messages configurable SVN-Revision: 30450	2012-02-11 15:12:10 +00:00
Gabor Juhos	aac3ad4c0e	ramips: raeth: use device pointer in DMA API calls SVN-Revision: 30449	2012-02-11 15:12:08 +00:00
Gabor Juhos	1fd8724e94	ramips: raeth: add netdev pointer to private structure SVN-Revision: 30448	2012-02-11 15:12:06 +00:00
Gabor Juhos	c6fa11d00f	ramips: raeth: cleanup DMA API usage in ramips_eth_hard_start_xmit SVN-Revision: 30447	2012-02-11 15:12:05 +00:00
Gabor Juhos	2d055f130e	ramips: raeth: unmap rx DMA address in ramips_cleanup_dma SVN-Revision: 30446	2012-02-11 15:12:04 +00:00
Gabor Juhos	7bd7ddcf4e	ramips: raeth: add rx_dma array to store the DMA address of the rx packets SVN-Revision: 30445	2012-02-11 15:12:02 +00:00
Gabor Juhos	647af823d9	ramips: raeth: use dma_addr_t for the descriptors SVN-Revision: 30444	2012-02-11 15:12:01 +00:00
Gabor Juhos	df5892d1f1	ramips: raeth: unmap DMA memory when a packet is received SVN-Revision: 30443	2012-02-11 15:11:56 +00:00
Gabor Juhos	617954ca5d	ramips: raeth: add a temporary pktlen variable SVN-Revision: 30442	2012-02-11 15:11:55 +00:00
Gabor Juhos	d1d492eaf9	ramips: raeth: protect macro parameters SVN-Revision: 30441	2012-02-11 15:11:50 +00:00
Gabor Juhos	8250692359	ramips: raeth: indicate dropped packets in stats SVN-Revision: 30440	2012-02-11 15:11:49 +00:00
Gabor Juhos	c67adbbddb	ramips: raeth: use the NUM_TX_DESC for the tx_skb array SVN-Revision: 30439	2012-02-11 15:11:47 +00:00
Gabor Juhos	a2c8789578	ramips: use uncached address in detect_mem_size SVN-Revision: 30438	2012-02-11 15:11:45 +00:00
Gabor Juhos	ba4c9b3a8f	ramips: rt305x: remove CONFIG_MTD_PARTITION ifdefery from machine files SVN-Revision: 30437	2012-02-11 15:11:43 +00:00
Gabor Juhos	f2dd67dc09	ramips: rt288x: remove CONFIG_MTD_PARTITION ifdefery from machine files SVN-Revision: 30436	2012-02-11 15:11:41 +00:00
Gabor Juhos	d6b9f88743	ramips: refresh patches SVN-Revision: 30435	2012-02-11 15:11:40 +00:00
Gabor Juhos	9cde29f1a7	ramips: rt305x: add support for Accton WR6202 / SMCWBR11S-3GN This patch adds support for the Accton WR6202 Mini 3G broadband router. Full details for this device are available at http://www.awbnetworks.com/products03.php?Fullkey=19. This device is identical to the SMCWBR11S-3GN: http://www.smc-asia.com/products03.php?Fullkey=210 It's also worth noting that this board has a GPIO line to control the power to the USB port. [juhosg: - fix checkpatch warnings, - reorder Kconfig entry, - merge the sysupgrade patch, - add GPL header] Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com> SVN-Revision: 30434	2012-02-11 15:11:36 +00:00
Gabor Juhos	59b474732c	ramips: rt305x: merge duplicated mac address setup Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 30433	2012-02-11 15:11:34 +00:00
Gabor Juhos	7298ef2456	ramips: rt305x: add profile for the Belkin f5d8235v2 Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 30432	2012-02-11 15:11:32 +00:00
Hauke Mehrtens	295a154f2f	brcm47xx: print the chip id and rev found by ssb and bcma SVN-Revision: 30428	2012-02-10 22:42:43 +00:00
Gabor Juhos	3708227f96	ar71xx: zero partition parser data in m25p80 Ths fixes parsing of RedBoot partitions. SVN-Revision: 30427	2012-02-10 20:19:06 +00:00
Gabor Juhos	0430194cc3	ramips: fix compiler warning in prom.c SVN-Revision: 30424	2012-02-10 17:38:46 +00:00
Hauke Mehrtens	4e332227d0	brcm47xx: update bcm5354 support patch SVN-Revision: 30423	2012-02-10 17:22:26 +00:00
Gabor Juhos	6c07149c2d	ar71xx: fix platform description SVN-Revision: 30419	2012-02-10 15:27:49 +00:00
Gabor Juhos	724211aa0d	generic: fix yaffs2 build warnings on 3.3 SVN-Revision: 30418	2012-02-10 15:21:43 +00:00
Gabor Juhos	766999085a	ar71xx: ag71xx: add BQL support It will be usable only from linux-3.3. Based on a patch by Dave Taht <dave.taht@bufferbloat.net> SVN-Revision: 30417	2012-02-10 14:56:47 +00:00
Gabor Juhos	fc069f030b	ar71xx: add dummy DQL helper functions for 3.2 SVN-Revision: 30416	2012-02-10 14:56:44 +00:00
Gabor Juhos	32a18a05f8	ar71xx: add preliminary support for 3.3 SVN-Revision: 30410	2012-02-10 11:53:56 +00:00
Felix Fietkau	512df38f5c	ar71xx: disable DDR flush for ethernet on AR934x, it is no longer necessary SVN-Revision: 30409	2012-02-10 11:46:37 +00:00
Felix Fietkau	61f48beadd	ar71xx: fix db120 board detection SVN-Revision: 30408	2012-02-10 11:46:31 +00:00
Gabor Juhos	73b9a8bf9b	ar71xx: allow to build ag71xx w/o PCI support enabled SVN-Revision: 30407	2012-02-10 11:46:10 +00:00
Gabor Juhos	fe0c7aac66	ar71xx: merge 3.2 fixes SVN-Revision: 30406	2012-02-10 08:19:33 +00:00
Gabor Juhos	d72bde99cd	ar71xx: merge files-3.2 to files SVN-Revision: 30405	2012-02-10 08:19:31 +00:00
Gabor Juhos	81b7aaefbe	ar71xx: nuke 2.6.39 support SVN-Revision: 30404	2012-02-10 08:19:28 +00:00
Gabor Juhos	650d777f3d	ar71xx: switch to 3.2.5 SVN-Revision: 30403	2012-02-10 08:19:27 +00:00
Gabor Juhos	abeab97efc	ar71xx: refresh 3.2 patches SVN-Revision: 30402	2012-02-10 08:19:25 +00:00
Gabor Juhos	6959317691	kernel: update linux 3.2 to 3.2.5 SVN-Revision: 30401	2012-02-10 08:19:23 +00:00
Gabor Juhos	f754063159	ar71xx: 3.2: remove stray semicolons from the PCI fixup patch SVN-Revision: 30400	2012-02-09 21:19:57 +00:00
Felix Fietkau	848dedeb8b	ar71xx: fix ar934x usb reset handling on 3.2 SVN-Revision: 30399	2012-02-09 20:39:41 +00:00
Gabor Juhos	31a0451cee	generic: fix kexec build error for MIPS with gcc-4.6-linaro SVN-Revision: 30395	2012-02-09 14:06:44 +00:00
Gabor Juhos	841f0f23b3	generic: 3.3: add missing config symbols SVN-Revision: 30393	2012-02-09 08:07:52 +00:00
Gabor Juhos	098ca08e94	generic: 3.3: fix yaffs2 build error SVN-Revision: 30392	2012-02-09 08:07:50 +00:00
Gabor Juhos	09c45f50d4	ar71xx: 3.2: get rid of an unused variable in ath79_spi.c SVN-Revision: 30391	2012-02-08 20:47:58 +00:00
Gabor Juhos	c126bed503	ar71xx: 3.2: fix AHB clock name in rb4xx_spi SVN-Revision: 30390	2012-02-08 20:47:56 +00:00
Gabor Juhos	32194001ed	generic: fix yaffs2 build error on 3.2 SVN-Revision: 30389	2012-02-08 20:47:54 +00:00
Florian Fainelli	fb53d25fa4	add more missing config symbols SVN-Revision: 30386	2012-02-08 17:35:40 +00:00
Gabor Juhos	81f15f5026	ar71xx: add profile and build image for the TEW-673GRU board SVN-Revision: 30377	2012-02-08 16:26:27 +00:00
Gabor Juhos	48e85cd47b	ar71xx: add support for the TRENDNet TEW-673GRU board SVN-Revision: 30376	2012-02-08 16:26:25 +00:00
Jo-Philipp Wich	b91a542247	select GENERIC_ATOMIC64 implementation to fix xfs related build errors SVN-Revision: 30371	2012-02-08 10:34:21 +00:00
Imre Kaloz	bd8683ac93	add audio and display features SVN-Revision: 30370	2012-02-08 10:21:48 +00:00
Jo-Philipp Wich	f35c4a3266	8139cp: backport patches to make driver stable again List of patches that Jo-Philipp groveled out of git. Redux: defuzzed. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> SVN-Revision: 30366	2012-02-07 21:56:51 +00:00
Vasilis Tsiligiannis	834be6c1fe	alix2, geos: Adjust CFLAGS Clone of CFLAGS change from r30013 into Geos and Alix platforms. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> SVN-Revision: 30353	2012-02-07 13:00:47 +00:00
Felix Fietkau	e430c864f4	kernel: add a recent upstream commit (post-3.3) to the ssb update patch, required for the next mac80211 update SVN-Revision: 30345	2012-02-07 11:28:06 +00:00
Vasilis Tsiligiannis	42ec97097e	generic: Enable HPET, HID and AT keyboard support SVN-Revision: 30309	2012-02-05 17:56:04 +00:00
Vasilis Tsiligiannis	b5ff8b85d6	generic: Add missing and remove unused config symbols SVN-Revision: 30133	2012-02-04 20:45:17 +00:00
Jonas Gorski	778e5d4fa5	brcm63xx: add support for linux 3.3 SVN-Revision: 30027	2012-02-04 10:17:27 +00:00
Jonas Gorski	49874a57f1	kernel: fix netfilter layer7 compilation in 3.3 SVN-Revision: 30026	2012-02-04 10:17:14 +00:00
Jonas Gorski	d6afe712ab	x86: make alix platform patch apply to 3.3 Based on a patch from Philip Prindeville. While at it, also refresh the patches. SVN-Revision: 30025	2012-02-03 20:17:00 +00:00
Jo-Philipp Wich	c433bfb571	disable additional PATA drivers in global 3.2 and 3.3 config, remove redundant symbols from alix2 config SVN-Revision: 30024	2012-02-03 19:47:55 +00:00
Jo-Philipp Wich	40867f1b68	x86: trivial -- add missing CONFIG_GEOS symbol to top-level So that builds don't stall in x86 prompting for this symbol. [From Philip Prindeville, via http://patchwork.openwrt.org/patch/1828/] SVN-Revision: 30023	2012-02-03 19:21:41 +00:00
Jo-Philipp Wich	79a3fdb9da	geos: backport driver from linux-next to 3.2 and 3.3 The Geos driver is in linux-next and will be out in 3.4. It builds fine against 3.2.2 and 3.3-rc2. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> SVN-Revision: 30022	2012-02-03 18:16:27 +00:00
Jo-Philipp Wich	25d605ab0e	net5501: backport drivers from linux-next Backport net5501 platform driver from 3.4. Remove vestiges of old (pre-2.6.30) leds-net5501.c driver. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> SVN-Revision: 30021	2012-02-03 18:14:02 +00:00
Jo-Philipp Wich	7a36f3d2ff	x86: move additional oddball PATA drivers These should only be enabled in the generic image, as they bloat all of the other targets. Also add symbols for NET5501, ALIX, and GEOS which were added backported to 3.2 and 3.3. Restore PC speaker to Geos target. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> SVN-Revision: 30019	2012-02-03 18:02:57 +00:00
Jo-Philipp Wich	d13c3cd073	net5501: adjust CFLAGS and package selection (#10893 ) This patches the CFLAGS for Geode LX CPUs for 4.3 and new GGC versions. This creates more compatible code and allowed me to boot my system first time with no troubles. Also, the missing kmod is added in. SVN-Revision: 30013	2012-02-03 14:19:29 +00:00
Felix Fietkau	d9ff9c44ee	ar71xx: add usb on the pb92 board SVN-Revision: 30007	2012-02-03 09:44:51 +00:00
Jonas Gorski	f99bf6517c	x86: add 3.3 generic symbols Copy x86/config-3.2 to x86/config-3.3 and add additional symbols (for 3.3-rc2). Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> SVN-Revision: 30002	2012-02-02 21:01:59 +00:00
Jo-Philipp Wich	b6be49429b	alix2: backport platform driver updates from linux-next Add patches to x86/patches-3.2 and x86/patches-3.3 (update will appear in 3.4). [Patch from Philipp Prindeville, via http://patchwork.openwrt.org/patch/1817/] SVN-Revision: 30001	2012-02-02 19:26:32 +00:00
Jo-Philipp Wich	7a9e4ffe8e	alix2, geos, net5501: remove kmod-ledtrig-netfilter, its not used by any standard system facility SVN-Revision: 30000	2012-02-02 19:11:52 +00:00
Jo-Philipp Wich	bf8bb9b661	alix2, goes, net5501: clean up default packages Remove packages which are dependencies of other packages Remove packages which are part of the default package list Remove DSL specific packages from net5501 Remove bridge package, we use the busybox applet Replace hostapd with wpad SVN-Revision: 29999	2012-02-02 19:06:22 +00:00
Jo-Philipp Wich	047ba1e12e	alix2, net5501: bump both subtargets to Linux 3.2.2 to align with the rest SVN-Revision: 29998	2012-02-02 19:00:40 +00:00
Jo-Philipp Wich	1ae5715f2e	geos: add missing files from previous commit SVN-Revision: 29997	2012-02-02 18:59:51 +00:00
Jo-Philipp Wich	a1258ccaba	geos: backport Geos driver from linux-next Backport of linux-next driver. Driver adds support for LEDS and S/W button. Add hotplug script for button actions. Add Openwrt system config for LEDS triggers. Add updated kernel .config for 3.2 symbols. [Patch from Philipp Prindeville, via http://patchwork.openwrt.org/patch/1816/] SVN-Revision: 29996	2012-02-02 18:58:20 +00:00
Jo-Philipp Wich	415a375eaa	geos: cleanup GPIO driver name In 3.1, the old drivers/char/ entry for the CS5535 GPIO driver went obsolete. Make Geos use a recent kernel and remove this ambiguity. [Patch from Philipp Prindeville, via http://patchwork.openwrt.org/patch/1815/] SVN-Revision: 29995	2012-02-02 18:44:35 +00:00
Jo-Philipp Wich	5523eca4e5	net5501: correct net5501 h/w configuration Bump to version 3.2. Simplify and correct kernel config (based on x86/config-3.2). Designate eth0 as wan interface, and bridge eth1/eth2/eth3. Add heartbeat LED trigger. Use correct CS5535 GPIO driver. Use correct USB drivers (OHCI not UHCI). Add MSR and HW clock support. Add GPIO mask definition. Add correct SATA drivers. Add LED triggers. [Patch from Philipp Prindeville, via http://patchwork.openwrt.org/patch/1802/] SVN-Revision: 29994	2012-02-02 18:41:10 +00:00
Jonas Gorski	eca9950f63	kernel: add preliminary support for linux 3.3 Based on 3.3-rc2 SVN-Revision: 29986	2012-02-02 08:23:54 +00:00
Jo-Philipp Wich	3310df6b52	alix2: correct h/w configuration Bump to version 3.2. Simplify and correct kernel config (based on x86/config-3.2). Drop obsolete CS5535 GPIO driver. [Patch from Philipp Prindeville, via http://patchwork.openwrt.org/patch/1804/] SVN-Revision: 29981	2012-02-01 15:31:23 +00:00
Gabor Juhos	41bd6bd282	ar71xx: fix ethernet LEDs on the WHR-{G301N,HP-G300N,HP-GN} boards SVN-Revision: 29978	2012-01-31 20:49:34 +00:00
Gabor Juhos	c315ce403b	ar71xx: merge DIR-600 A1 and DIR-615 E4 support SVN-Revision: 29976	2012-01-31 18:37:29 +00:00
Gabor Juhos	dd47afc197	ar71xx: fix ethernet LEDs on the DIR-600-A1 board SVN-Revision: 29975	2012-01-31 18:37:24 +00:00
Gabor Juhos	8200f0c61a	ar71xx: unify LED names on D-Link boards SVN-Revision: 29974	2012-01-31 18:37:15 +00:00
Gabor Juhos	faeca86e50	ar71xx: support for D-LINK DIR-615 rev. E4 This patch adds support for D-LINK DIR-615 E4 board. It's mostly based on the existing support for DIR-600 A1, with some changes in the leds configuration. It's an updated version of the patch that reliably works on my hw for about a year (it was built from trunk on Jan 2011). When I decided to update the firmware and checked for the current support for that device, I also found previously posted patches by Alexey Loukianov that mentioned some stability issues. I'm not sure where could be the difference, the patches are very similar except the wmac led pin number - I was using 1, and those patches used 17. [juhosg: add 3.2 support] Signed-off-by: Vadim Girlin <vadimgirlin@gmail.com> SVN-Revision: 29973	2012-01-31 18:37:09 +00:00
Gabor Juhos	97e4ddd012	ar71xx: add support for TP-Link TL-MR11U Adds support for TL-MR11U, a portable router with very similar hardware to the TL-WR703N and TL-MR3020, but with an onboard 2000mAh battery. Tested, working: All interfaces (Ethernet, 802.11n, USB) WPS & Reset switches (Power appears to be a hardware slider) Ethernet, Wifi, 3G LEDs (Power & charging LEDs hardware controlled) Sysupgrade [juhosg: fix indentations to use TABs instead of spaces, fix 3.2 patch breakage] Signed-off-by: Simon Taylor <simon.taylor.uk@gmail.com> SVN-Revision: 29972	2012-01-31 18:37:01 +00:00
Gabor Juhos	8766f32b8c	ar71xx: compress kernel binaries in Image/Prepare stage The lzma compressed kernel is used by one of the loaders. SVN-Revision: 29971	2012-01-31 18:36:54 +00:00
Gabor Juhos	d5d37febb4	ar71xx: use dynamically allocated partitions in wrt160nl_part SVN-Revision: 29970	2012-01-31 18:36:51 +00:00
Gabor Juhos	44ed690cb3	ramips: change vlan_config for the ALFA W502U board This change moves the WAN port into a separate VLAN. SVN-Revision: 29969	2012-01-31 18:34:10 +00:00
Jonas Gorski	b3568b10c2	kernel: update linux 3.2 to 3.2.2 SVN-Revision: 29967	2012-01-31 09:44:00 +00:00
Jonas Gorski	1015fab0d7	kernel: update linux 3.1 to 3.1.10 SVN-Revision: 29966	2012-01-31 09:43:57 +00:00
Jonas Gorski	e67f4477bb	kernel: update linux 3.0 to 3.0.18 SVN-Revision: 29965	2012-01-31 09:43:53 +00:00
Florian Fainelli	882eddbf92	build 96348R images SVN-Revision: 29960	2012-01-30 21:12:32 +00:00
Florian Fainelli	0700644b16	remove support for 2.6.39 SVN-Revision: 29959	2012-01-30 21:12:28 +00:00
Florian Fainelli	038fc8eac3	bump to 3.0.17 SVN-Revision: 29958	2012-01-30 21:12:25 +00:00
Florian Fainelli	8100658a30	add missing config symbols Thanks KanjiMonster SVN-Revision: 29955	2012-01-30 10:53:20 +00:00
Florian Fainelli	0501ea063b	fix gpiommc build failure with 3.2 SVN-Revision: 29954	2012-01-30 10:53:16 +00:00
Jo-Philipp Wich	55b5e15bff	create a config-3.2 for upcoming changes, rebase config-default to 2.6.39 SVN-Revision: 29953	2012-01-30 02:13:37 +00:00
Florian Fainelli	8c4813b75e	add default and Sim.One profiles SVN-Revision: 29942	2012-01-29 15:00:36 +00:00
Florian Fainelli	0bb50678de	add 3.2 support SVN-Revision: 29941	2012-01-29 15:00:33 +00:00
Florian Fainelli	e82f06639e	add another 3.2 framebuffer symbol SVN-Revision: 29940	2012-01-29 15:00:29 +00:00
Florian Fainelli	ad808cf7e6	add support for 3.2 kernel SVN-Revision: 29939	2012-01-29 15:00:25 +00:00
Florian Fainelli	eeb00634a7	add support for the Atheros AP113 reference board This reference board is equipped with: - AR7242 SoC - AR9580 on-board Wi-Fi - AR8316 switch SVN-Revision: 29935	2012-01-28 13:19:49 +00:00
Florian Fainelli	405a0f3905	refresh 3.2 patches SVN-Revision: 29934	2012-01-28 13:19:43 +00:00
Jo-Philipp Wich	cb6f860b8f	make sure .config gets copied as file When using scripts/env, .config is most likely a symbolic link pointing to env/.config. Previously the symbolic link got copied as-is into the SDK tarball, leading to a dangling .config symlink on the target system which prevented the SDK from working. SVN-Revision: 29927	2012-01-28 03:30:30 +00:00
Hauke Mehrtens	d1c07b3657	brcm47xx: add fix for cardbus host controller These devices have two devices on the bus, the host controller itself and the device. SVN-Revision: 29923	2012-01-27 20:10:51 +00:00
Gabor Juhos	b9b768b8d3	ar71xx: use 64k block size for WZR-HP-AG300H SVN-Revision: 29917	2012-01-27 10:42:41 +00:00
Gabor Juhos	ac8116739a	ar71xx: fix sysupgrade image building of atheros boards after r29899 SVN-Revision: 29916	2012-01-27 07:51:09 +00:00
Gabor Juhos	013fe76b36	ar71xx: create the temporary directory before building initramfs images Thanks to Florian for reporting. SVN-Revision: 29915	2012-01-26 21:28:34 +00:00
Gabor Juhos	a5538a18d4	ar71xx: create a profile and build images for Compex WPE72 [juhosg: remove ath9k from the the profile package list, build WPE72 image with the Default profile as well] Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com> SVN-Revision: 29914	2012-01-26 17:01:44 +00:00
Gabor Juhos	e1e84badaa	ar71xx: add support for Compex WPE72/WPE72NX This patch adds support for Compex WPE72 bare board and Compex WPE72NX Indoor Access Point. [juhosg: add support to 3.2 as well] Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com> SVN-Revision: 29912	2012-01-26 17:01:41 +00:00
Gabor Juhos	1c4f6b4308	generic: add WPE72 ID to myloader.h Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com> SVN-Revision: 29911	2012-01-26 17:01:38 +00:00
Gabor Juhos	b3fdd931d1	ramips: add support for Sitecom WL-341v3 and other Sercomm IP1006RRv2 boards This patch adds support for the Sitecom WL-341 v3 and other Sercomm IP1006RRv2 based boards for sysupgrade support and for the initial flash through pushbutton initiated recovery mode with the special partition table and fixes for the quirks and things required by the modified bootloader. There is a known bug, Wi-Fi is not working on my board probably because of the lack of RAM (the board only has 16MiB ram -- half of the normal amount for non rebadged versions, but there is an empty slot for another ram chip,) but I don't know for sure. The driver loads but hostapd fails to load so I think it's not related to the specific device except for the lack of RAM. Moreover, only 7 of the 11 onboard leds are confirmed working, it seems that one of the others is always on and the remaining ones are connected to the wireless card leds already recognized by OpenWrt [juhosg: reordered some parts in order to keep things sorted alphabetically] Signed-off-by: Marco Antonio Mauro <marcus90@gmail.com> SVN-Revision: 29910	2012-01-26 10:44:23 +00:00
Gabor Juhos	038d4e0d77	ar71xx: TL-MR3020: fix board detection, fix missing mandatory package and modify LED behaviour This patch fixes the board detection of the TL-MR3020. The LED behaviour has also been modified: * The WPS LED is the diag LED now. * A netdev trigger for the LAN LED has been added. The profile of the TL-MR3020 has been updated because the needed package "kmod-ledtrig-usbdev" was missing which resulted in a non-working usbdev trigger for the 3G/USB LED. [juhosg: the board name changes has been removed, and the kernel files has been changed instead.] Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de> SVN-Revision: 29905	2012-01-25 07:44:45 +00:00
Gabor Juhos	c11ac55b29	ar71xx: TL-MR3020: fix GPIO polarity for button and switch This patch fixes the GPIO polarity for the button and the sliding switch. The buttons are not active low. "Pressed" and "Released" events are wrong without the patch. Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de> SVN-Revision: 29904	2012-01-25 07:44:43 +00:00
Gabor Juhos	4f3d6c9ae9	ar71xx: use the lzma loader on the Planex boards SVN-Revision: 29900	2012-01-24 20:12:10 +00:00
Gabor Juhos	5fa9768cee	ar71xx: rename Sysupgrade/{KR,RK} to Sysupgrade/{KR,RK}uImage SVN-Revision: 29899	2012-01-24 20:12:08 +00:00
Gabor Juhos	095c236694	ar71xx: fix the AP/Router LED definitons on MZK-W300NH SVN-Revision: 29897	2012-01-24 18:40:38 +00:00
Gabor Juhos	23e1b451dc	ar71xx: preset WLAN LED config on MZK-W300NH SVN-Revision: 29896	2012-01-24 18:40:36 +00:00
Gabor Juhos	23836d5908	ar71xx: remove hardcoded MTD layout from planex files SVN-Revision: 29895	2012-01-24 18:40:34 +00:00
Gabor Juhos	859c915077	ar71xx: pass mtdlayout to Planex boards via command line SVN-Revision: 29894	2012-01-24 18:40:33 +00:00
Gabor Juhos	6ad9bf8d17	ar71xx: remove an unused header file SVN-Revision: 29893	2012-01-24 18:40:31 +00:00
Gabor Juhos	02e77c6ae1	ramips: generate sysupgrade image for the ALL0256N Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 29884	2012-01-24 11:48:48 +00:00
Gabor Juhos	944c8aacdb	ramips: add user-space support for ALL0256N This adds uci-defaults and sysupgrade support for the ALL0256N. Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 29883	2012-01-24 11:48:47 +00:00
Gabor Juhos	1932a7205c	ramips: add kernel support for ALL0256N Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 29882	2012-01-24 11:48:45 +00:00
Gabor Juhos	17bb003891	ar71xx: nuke fs_all variable in image/Makefile SVN-Revision: 29880	2012-01-24 09:47:25 +00:00
Gabor Juhos	1fb88e2541	ar71xx: create interim kernel files in a separate dir This reduces the size of the ImageBuilder tarball a lot. SVN-Revision: 29879	2012-01-24 09:47:23 +00:00
Gabor Juhos	a43e2f508f	ar71xx: prebuild all loaders in Image/Prepare stage SVN-Revision: 29878	2012-01-24 09:47:22 +00:00
Gabor Juhos	faf17f197f	ImageBuilder: respect the PROFILE parameter Based on a patch from #10766 SVN-Revision: 29877	2012-01-24 09:47:20 +00:00
Gabor Juhos	9cf1d4e06e	ramips: scripts updates In this patch: * rename Argus leds to avoid underscores * rename Belkin F5D8235 v1 leds from f5d8234 to f5d8235 * remove Belkin F5D8235 v1 status led defined as storage led (it was defined as usb led earlier, just in wrong place) - it should have router led as in v2 * add Argus, Sparklan and Belkin F5D8235 v2 status leds * add Belkin F5D8235 v1 and v2 usb leds * fix Belkin F5D8235 v2 network config generation and mac address axtraction * fix Sparklan board identification * add Sparklan usb led (this board doesn't have usb connector by default and the led is hidden also but if you are going to solder the connector then you'll see the led too) * add Sparklan network config generation and mac address extraction * fix empty string test in network script and... * ...sort case entries by the first board in the list Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 29871	2012-01-23 10:23:32 +00:00
Gabor Juhos	44517a3789	ar71xx: 3.2: fix build errors if PCI is not enabled SVN-Revision: 29870	2012-01-23 08:52:21 +00:00
Gabor Juhos	778db0a13d	ar71xx: fix compiler warning if PCI is not enabled SVN-Revision: 29869	2012-01-23 08:52:18 +00:00
Gabor Juhos	af015f956c	ar71xx: add initial support for 3.2 Tested on the following boards: ALFA AP96 TL-MR3220 v1 TL-WR1043ND v1 TL-WR2543ND v1 TL-WR703N v1 TL-WR741ND v1 TL-WR741ND v4 WNDR3700 v1 WZR-HP-G300NH SVN-Revision: 29868	2012-01-22 22:38:19 +00:00
Gabor Juhos	386cbfe45b	ar71xx: move arch specific files to files-2.6.39 SVN-Revision: 29867	2012-01-22 22:38:11 +00:00
Gabor Juhos	7b7427e52c	ar71xx: build ALFA AP96 images with default profile as well SVN-Revision: 29866	2012-01-22 22:33:15 +00:00
Gabor Juhos	dd49cca9d6	generic: 3.2: allow to build myloader mtd parser for ATH79 SVN-Revision: 29860	2012-01-22 18:43:39 +00:00
Gabor Juhos	9be1b91644	generic: allow to build myloader mtd parser for 3.2+ SVN-Revision: 29858	2012-01-22 18:36:49 +00:00
Gabor Juhos	809fe38e41	ramips fix f5d8235-v1 diag LED support SVN-Revision: 29857	2012-01-22 18:11:39 +00:00
Gabor Juhos	e7dee3aeed	ar71xx: wrt160nl_part: include module.h and fix compiler warnings SVN-Revision: 29856	2012-01-22 17:55:38 +00:00
Gabor Juhos	a7d344565b	ar71xx: tplinkpart: include module.h SVN-Revision: 29855	2012-01-22 17:55:36 +00:00
Gabor Juhos	6c2638c5e2	ar71xx: rename vsc7385 spi driver SVN-Revision: 29853	2012-01-22 13:51:57 +00:00
Gabor Juhos	bb16739db9	ar71xx: rename ap81 spi driver SVN-Revision: 29852	2012-01-22 13:51:56 +00:00
Gabor Juhos	5ef8b922fa	ar71xx: rename rb4xx spi drivers SVN-Revision: 29851	2012-01-22 13:51:54 +00:00
Gabor Juhos	aad175d5b6	ar71xx: rename the nxp_74hc153 driver SVN-Revision: 29850	2012-01-22 13:51:52 +00:00
Gabor Juhos	ef1c53b7b7	ar71xx: change board id of the UniFi board SVN-Revision: 29849	2012-01-22 13:51:50 +00:00
Gabor Juhos	f90e578903	ar71xx: include linux/module.h in the micrel phy driver SVN-Revision: 29848	2012-01-22 13:51:49 +00:00
Gabor Juhos	e9d8deaaed	ramips: add sysled and sysupgrade to wr512-3gn Patch from #10035. SVN-Revision: 29847	2012-01-22 13:43:23 +00:00
Gabor Juhos	8e662f28fe	generic: 3.2: don't disable lockdep for OOT modules SVN-Revision: 29846	2012-01-22 09:57:39 +00:00
Gabor Juhos	4625c9b5a4	generic: rtl8366: add rtl8366_smi_write_reg_noack helper After issuing a soft reset on the RT8366{S,RB} switch, waiting for the last acknowlegement fails in rtl8366_smi_write_reg. Add a _noack version of the function and use that for issuing a soft reset. SVN-Revision: 29844	2012-01-21 22:44:09 +00:00
Hauke Mehrtens	26d4e1876c	brcm47xx: add support for pcie host controller on bcma based SoCs. This also adds minimal support for the BCMA43224 pcie wireless card. SVN-Revision: 29843	2012-01-21 22:39:20 +00:00
Gabor Juhos	557cf076b4	ramips: sysupgrade for ESR-9753 This patch add sysupgrade for Engenius ESR-9753 Signed-off-by: Artur Wronowski <arteqw@gmail.com> SVN-Revision: 29824	2012-01-20 10:49:26 +00:00
Jonas Gorski	aa8f9171f2	kernel: fix OCF for linux 3.2 Add skb_frag_page from 3.2 to OCF for 3.1 and earlier and use it. SVN-Revision: 29818	2012-01-19 19:51:54 +00:00
Jo-Philipp Wich	fc512193a0	add missing kernel symbols SVN-Revision: 29790	2012-01-19 01:57:22 +00:00
Jo-Philipp Wich	2fc3fe1d09	Make the grub timeout configurable on x86 targets Signed-off-by: Justus Winter <4winter@informatik.uni-hamburg.de> SVN-Revision: 29786	2012-01-19 01:14:45 +00:00
Jo-Philipp Wich	095f7f2da3	x86/config-3.2: add linux-3.2 symbols for x86 The following symbols are missing for x86, in sorted order. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> SVN-Revision: 29783	2012-01-19 00:31:39 +00:00
Florian Fainelli	dbfeb5d158	fix thinko in 102-ehci_hcd_ignore_oc patch SVN-Revision: 29773	2012-01-18 07:56:02 +00:00
John Crispin	49eb3fd845	gigaset 76x * fixes leds * adds all leds found on the sx763 board * removes board_config from flash layout because wireless data is stored in kernel (ath5k) * fix button handling Signed-off-by: Luka Perkov <openwrt@lukaperkov.net> SVN-Revision: 29763	2012-01-17 12:10:35 +00:00
John Crispin	a2708d11e8	ramips: Rework ramips_eth to not require irqsave locking anymore Previously the tx housekeeping was done in a spin_lock_irqsave critical section which causes irqs to be disabled during that time. Since the housekeeping is already prepared to be scheduled as a tasklet process the housekeeping only in softirq context and revise the locking between the tx path and the housekeeping tasklet by using a normal spin_lock which in most situations will be a NOP anyway. This makes sure that interrupts are only disabled for a short time since in the worst case the housekeeping might have to free up to 256 skbs. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> SVN-Revision: 29762	2012-01-17 11:23:11 +00:00
Hauke Mehrtens	034cf5643f	brcm47xx: add support for kernel 3.2 SVN-Revision: 29756	2012-01-15 21:18:34 +00:00
Hauke Mehrtens	c3d134af12	brcm47xx: run kernel_oldconfig SVN-Revision: 29755	2012-01-15 14:53:32 +00:00
Imre Kaloz	f9e41adc80	add support for OMAP4 based boards, starting with the PandaBoard SVN-Revision: 29753	2012-01-14 23:02:56 +00:00
Imre Kaloz	6274648199	fixup arm xz support with recent changes SVN-Revision: 29750	2012-01-14 22:55:04 +00:00
Imre Kaloz	e65195c246	add missing symbols SVN-Revision: 29749	2012-01-14 22:53:28 +00:00
Felix Fietkau	b0479e2ca2	kernel: disable bridge igmp snooping in 3.2 as well SVN-Revision: 29747	2012-01-14 14:57:03 +00:00
Felix Fietkau	66895b7115	kernel: disable bridge igmp snooping by default to avoid multicast issues SVN-Revision: 29744	2012-01-14 13:50:25 +00:00
Jonas Gorski	9eb73ee6b7	kernel: ppc40x: ppc44x: add missing kernel config symbol SVN-Revision: 29742	2012-01-14 12:04:17 +00:00
Hauke Mehrtens	d5bc3a994b	brcm47xx: update usb driver Add workarround for BCM5357 and BCM4749. This patch contains the following fixes from George Kashperko: * separate subroutines for controller initialization workarounds - following CodingStyle recommendations; * __devinit __devexit __devinitconst annotations for CONFIG_HOTPLUG; * fix leak in ssb_hcd_create_pdev/bcma_hcd_create_pdev - as hci_res being kmalloc'ed is never freed anywhere while platform_device_add_resources will kmemdup resources right away; * fix compilation error in ssb_hcd_resume - it will fail as soon as CONFIG_PM is selected. SVN-Revision: 29734	2012-01-13 20:11:23 +00:00
Jo-Philipp Wich	9d497cb132	rtl8366: fix rtl8366_smi_detect() after r29677 SVN-Revision: 29732	2012-01-13 19:17:58 +00:00
Jonas Gorski	3883e71097	brcm63xx: add support for linux 3.2 SVN-Revision: 29731	2012-01-13 14:59:50 +00:00
Jonas Gorski	1bc0abb058	kernel: add support for linux 3.2.1 SVN-Revision: 29730	2012-01-13 14:55:07 +00:00
Jonas Gorski	f3f1075655	kernel: backport overlayfs v11 to 3.0 and 2.6.39 Should fix whiteout issues and missing files when using extroot. SVN-Revision: 29727	2012-01-13 14:42:53 +00:00
Jonas Gorski	c560444a58	kernel: update linux 3.1 to 3.1.9 SVN-Revision: 29726	2012-01-13 14:38:28 +00:00
Jonas Gorski	e49d3e1d5b	kernel: update linux 3.0 to 3.0.17 SVN-Revision: 29725	2012-01-13 14:10:44 +00:00
Felix Fietkau	e87bb77966	ar8216: use vlan configuration for connecting ports (forced to be untagged) even with vlan_enable=0, but keep them isolated before the switch has been configured this makes enable_vlan=0 practical for vlan passthrough SVN-Revision: 29719	2012-01-12 10:15:11 +00:00
Felix Fietkau	c33e016fa5	ar8216: do not strip vlan tags when running with vlan_enable=0 SVN-Revision: 29718	2012-01-12 10:15:08 +00:00
Gabor Juhos	fbf81c8e79	ar71xx: move irq_to_gpio and gpio_to_irq into gpio.c SVN-Revision: 29713	2012-01-11 18:00:50 +00:00
Daniel Dickinson	034b7f0ef5	Remove invalid LED GPIO from GW6200 board definition. GPIO 35 isn't intended to control ethernet LED (the led behaviour is a side effect) and using the gpio as an led causes kernel panics. SVN-Revision: 29712	2012-01-11 13:47:48 +00:00
Gabor Juhos	67f62cf5cf	ar71xx: disable ath79 in order to get rid of Kconfig warnings SVN-Revision: 29711	2012-01-11 09:14:19 +00:00
Gabor Juhos	88d8cdd503	ar71xx: pb44_spi: add shutdown handler This allows to access the flash from a kexec'd kernel. SVN-Revision: 29710	2012-01-11 09:14:18 +00:00
Gabor Juhos	e1b7995aef	ar71xx: pb44_spi: call pb44_spi_{en,dis}able from probe/remove SVN-Revision: 29709	2012-01-11 09:14:17 +00:00
Gabor Juhos	67444c7795	ar71xx: pb44_spi: introduce pb44_spi_{en,dis}able helpers SVN-Revision: 29708	2012-01-11 09:14:15 +00:00
Gabor Juhos	0f566a376c	ar71xx: ar71xx_spi: add shutdown handler This allows to access the flash from a kexec'd kernel. SVN-Revision: 29707	2012-01-11 09:14:14 +00:00
Gabor Juhos	09a6e3f662	ar71xx: ar71xx_spi: save and restore regs from probe/remove SVN-Revision: 29706	2012-01-11 09:14:13 +00:00
Gabor Juhos	714a9bd641	ar71xx: ar71xx_wdt: add shutdown handler SVN-Revision: 29705	2012-01-11 09:14:11 +00:00
Gabor Juhos	9727256330	ar71xx: refresh patches SVN-Revision: 29683	2012-01-07 19:36:43 +00:00
Gabor Juhos	4edff7d3ef	ar71xx: add a profile and build images for the TL-WR2543N/ND SVN-Revision: 29682	2012-01-07 19:36:42 +00:00
Gabor Juhos	a1dcbc66a6	ar71xx: add initial support for the TL-WR2543N/ND board The WLAN LEDs are not working yet. SVN-Revision: 29680	2012-01-07 19:36:35 +00:00
Gabor Juhos	a56bdeff9d	ar71xx: allow to specify max read size for m25p80 Reading from the flash chip on the TL-WR2543ND seems buggy. If the SPI flash driver tries to read too much data in one SPI transfer, the flash chip returns bogus values. This can be caused by a buggy flash chip on my board, or it can be a bug in our SPI driver. Add a workaround to the m25p80 driver until I find out the root cause of the problem. The patch allows to specify the maximum numner of bytes which can be read safely withint one SPI transfer. SVN-Revision: 29679	2012-01-07 19:36:33 +00:00
Gabor Juhos	8b567fb508	generic: add driver for the RTL8367R/M switches SVN-Revision: 29678	2012-01-07 19:36:31 +00:00
Gabor Juhos	87fb92ee03	generic: rtl8366: preparing for RTL8367 support * make clock delay configurable * make read,write commands configurable * use u16 for member and untag fields SVN-Revision: 29677	2012-01-07 19:36:30 +00:00
Gabor Juhos	43196813d7	generic: rtl8366_smi: add timeout message SVN-Revision: 29676	2012-01-07 19:36:25 +00:00
Gabor Juhos	67b2814842	ar71xx: local mac support on the wndr3700 The wndr3700 at least has no eth0 mac address and usually leverages the first wireless device's mac when in a bridged scenario. If, however, you want to route, and not bridge the interfaces, you need a unique mac address for it. This patch sets the local bit on the mac address pulled from the wireless chip and uses the resulting address for eth0. Patch-by: Dave Taht <dave.taht@gmail.com> SVN-Revision: 29675	2012-01-07 17:24:44 +00:00
Gabor Juhos	6c74274c8d	generic: improve MIPS kexec support It is based on patches from the linux-longsoon-community git tree: http://dev.lemote.com/cgit/linux-loongson-community.git/ Now the kernel can use the command line parameter from kexec-tools. Runtime tested on ar71xx with 2.6.39.4 (the wathdog must be stopped before executing the new kernel). Compile tested with lantiq (3.1.4) and brcm47xx (3.0.12). SVN-Revision: 29674	2012-01-07 16:29:16 +00:00
Gabor Juhos	f638c6207b	ar71xx: fix sysupgrade on the TL-WR841N/ND v7 boards SVN-Revision: 29672	2012-01-06 15:54:59 +00:00
Gabor Juhos	1e848b17ad	ar71xx: add support for Redwave RW2458N Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> SVN-Revision: 29669	2012-01-06 07:20:59 +00:00
Gabor Juhos	84cd8a5ee0	ar71xx: fix RB-750 network configuration SVN-Revision: 29668	2012-01-06 07:20:54 +00:00
Gabor Juhos	8eb0b7ab3d	ar71xx: fix sections mismatch warnings in the nand drivers SVN-Revision: 29667	2012-01-05 18:08:33 +00:00
Gabor Juhos	232eb83f74	ar71xx: fix LED configuration on the RB-750 SVN-Revision: 29666	2012-01-05 18:08:28 +00:00
Gabor Juhos	d65c6fe720	ar71xx: create profile and build image for the ALFA AP96 board SVN-Revision: 29663	2012-01-04 21:13:57 +00:00
Gabor Juhos	b8f0d86115	ar71xx: add inital support for the ALFA Network AP96 board The microSD slot and the Real Time Clock is not working yet. The miniPCIe interface is not tested due to the lack of a suitable card. SVN-Revision: 29662	2012-01-04 21:13:54 +00:00
Gabor Juhos	807e046193	ar71xx: specify console kernel parameter for the Compex boards SVN-Revision: 29660	2012-01-04 17:30:59 +00:00
Gabor Juhos	923f3e3752	ar71xx: allow to use the command line hack on compex devices SVN-Revision: 29659	2012-01-04 17:30:58 +00:00
Gabor Juhos	2f53f82203	ar71xx: use the TL-MR3x20 code for the TL-WR841N/ND v7 These models are based on the AP99 reference board, and uses the AR7241 SoC. SVN-Revision: 29658	2012-01-04 17:30:57 +00:00
Gabor Juhos	301b1b4f92	ar71xx: show correct model name on TL-WA701N/ND boards SVN-Revision: 29657	2012-01-04 17:30:55 +00:00
Gabor Juhos	ac68f0d8fa	ar71xx: add profile and build image for the TL-WA701N/ND boards SVN-Revision: 29656	2012-01-04 17:30:54 +00:00
Gabor Juhos	72019009c7	ar71xx: fix network configuration for the TL-WA901N/ND boards SVN-Revision: 29654	2012-01-04 17:30:52 +00:00
Gabor Juhos	90bfef9ec9	ar71xx: allow to use LAN LED on the TL-WA901N/ND boards SVN-Revision: 29653	2012-01-04 17:30:50 +00:00
Gabor Juhos	5eb502d9c1	ar71xx: add default LED configuration for the TL-MR3020 Also use the system LED for diagnostic. SVN-Revision: 29652	2012-01-04 17:30:49 +00:00
Gabor Juhos	1045c83527	ar71xx: add support for TP-Link TL-MR3020 This patch adds support for the TP-Link device TL-MR3020 which is very similiar to the TL-WR703N. The TL-MR3020 uses 5 LEDs, 1 push button and a switch with 3 positions. Only four LEDs can be controlled via GPIO. The power LED is connected to the power supply. The WPS push button has been mapped to KEY_WPS_BUTTON. The two GPIO signals of the sliding switch have been mapped to BTN_0 and BTN_1. I have also setup a wiki page with details here: http://wiki.openwrt.org/toh/tp-link/tl-mr3020 USB is working and has been tested with USB mass storage and USB UMTS stick. Wifi also seems to work. Ethernet is working too. Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de> SVN-Revision: 29651	2012-01-04 17:30:47 +00:00
Gabor Juhos	88223f87d1	ar71xx: use the new om-watchdog package for OM2P Signed-off-by: Antonio Quartulli <ordex@autistici.org> SVN-Revision: 29648	2012-01-04 17:30:41 +00:00
Jo-Philipp Wich	a788f199c9	remove current RTSP support SVN-Revision: 29643	2012-01-04 00:29:29 +00:00
Jo-Philipp Wich	237282ae8c	backport upstream commit e1738bd9cecc5c867b0e2996470c1ff20f66ba79 to affected kernels (#9802 ) commit 8efa88540635 (sch_sfq: avoid giving spurious NET_XMIT_CN signals) forgot to call qdisc_tree_decrease_qlen() to signal upper levels that a packet (from another flow) was dropped, leading to various problems. SVN-Revision: 29642	2012-01-03 23:08:15 +00:00
Gabor Juhos	8854c90119	ar71xx: add profile and build factory image for the Hornet-UB board SVN-Revision: 29637	2012-01-01 19:30:29 +00:00
Gabor Juhos	1d3de89f3c	ar71xx: build images for the ALFA Network N2/N5 boards SVN-Revision: 29636	2012-01-01 19:30:28 +00:00
Gabor Juhos	1e68f10b87	ar71xx: add support for the ALFA Network N2/N5 boards SVN-Revision: 29635	2012-01-01 19:30:25 +00:00
Gabor Juhos	5c067db8a7	ar71xx: define LAN/WAN LEDs for the TL-WR741N/ND boards SVN-Revision: 29631	2011-12-31 15:02:46 +00:00
Gabor Juhos	fff02e6ea8	ar71xx: enable SWCONFIG_LEDS SVN-Revision: 29630	2011-12-31 15:02:40 +00:00
Gabor Juhos	5fa65cba6e	kernel: swconfig: introduce a generic switch LED trigger SVN-Revision: 29627	2011-12-31 15:02:30 +00:00
Gabor Juhos	8c2482f76e	ar71xx: ag71xx: implement get_port_{link,stats} callbacks SVN-Revision: 29626	2011-12-31 15:02:26 +00:00
Gabor Juhos	975355a2b1	kernel: swconfig: add get_port_{link,stats} callbacks SVN-Revision: 29625	2011-12-31 15:02:24 +00:00
Gabor Juhos	557009bbdb	ar71xx: fix LEDs on the WRT400N SVN-Revision: 29624	2011-12-31 13:54:11 +00:00
Gabor Juhos	244c322d25	ramips: rt288x: add support for the Belkin F5D8235-4 v1 board Patch-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> SVN-Revision: 29617	2011-12-28 08:43:43 +00:00
Gabor Juhos	f50b02b559	ramips: rt288x: change base address and window size of flash bank 0 SVN-Revision: 29616	2011-12-28 08:43:36 +00:00
Gabor Juhos	98437278c4	ramips: rt305x: add support for the ALFA Networks W502U (R36) board SVN-Revision: 29615	2011-12-28 08:43:32 +00:00
Gabor Juhos	76dacee995	ar71xx: enable sysupgrade support for airrouter Works for me! ;-) Patch-by: Russell Senior <russell@personaltelco.net> SVN-Revision: 29614	2011-12-27 16:59:43 +00:00
Gabor Juhos	c6ee919b2a	ar71xx: fix sysupgrade on PB42/PB44 boards SVN-Revision: 29613	2011-12-27 16:57:01 +00:00
Gabor Juhos	723d8dd74f	ramips: rt288x: add support for the Buffalo WLI-TX4-AG300N board SVN-Revision: 29612	2011-12-27 16:56:30 +00:00
Jo-Philipp Wich	9fa33ceee2	add missing config symbol SVN-Revision: 29610	2011-12-25 13:33:18 +00:00
Hauke Mehrtens	11125d68ed	brcm47xx: fix usb on more recent bcma based devices. SVN-Revision: 29605	2011-12-23 17:21:52 +00:00
Gabor Juhos	7b1e525b56	ramips: initial support for Sitecom WL-351 v1 002 This add support for the Sitecom WL-351 v1 002. In principle the Engenius ESR9850 should also work with this, but I don't have the hardware to test it. Since an external gigabit switch (RTL8366RB) is used, I had to modify the ramips_esw driver to add a 'bypass' mode, which just configures it to not filter the vlan tags. Also two initialization words (FCT2 and FPA2) are set to different values by u-boot than what the driver is using and it only seems to work correctly when they not overridden by the driver, so I added them to the platform specific data as reg_initval_fct2 and reg_initval_fpa2. With this wired lan works as expected, however I'm still having some trouble with the wireless lan: It only works after I rmmod & re-insmod rt2800pci and then reconfigure it in the webinterface, but not directly after rebooting. The symptom of this is wpad saying: Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: associated (aid 1) Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> WPA: pairwise key handshake completed (RSN) Dec 20 15:45:22 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: authenticated But wpa_supplicant on the client saying: Authentication with <wl351mac> timed out. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 29604	2011-12-23 14:27:16 +00:00
Gabor Juhos	2cb946f5b4	ramips: add support for the Senao/EnGenius ESR-9753 board Signed-off-by: Artur Wronowski <arteqw@gmail.com> SVN-Revision: 29603	2011-12-23 14:27:10 +00:00
Gabor Juhos	03bce34384	ramips: define firmware partition for Omnima MiniEMBWiFi Patch-by: Ivan Ignjatic <ivan@omnima.co.uk> SVN-Revision: 29602	2011-12-23 14:27:05 +00:00
Felix Fietkau	db0a1db257	ar71xx: set a reserved bit that resets to 1 when writing the address table control register on the ar7240 switch (should fix #10547 ) SVN-Revision: 29598	2011-12-22 05:43:53 +00:00
Jonas Gorski	8799627ef0	ar71xx: add default network config for buffalo WZR-HP-G300NH2 and WZR-HP-G450H Thanks netprince for reporting and testing. SVN-Revision: 29595	2011-12-21 19:32:40 +00:00
Jo-Philipp Wich	ebefe1eb3a	the mach file of the WZR-HP-G300NH2 accidentally claimed the mach id of the WZR-HP-AG300H, correct the id (#10649 ) SVN-Revision: 29593	2011-12-21 01:27:48 +00:00
Hauke Mehrtens	0cd03df3b1	brcm47xx: remove patch starting adding brcm4716 to ssb brcm4716 is supported by bcma now we do not need this patch SVN-Revision: 29576	2011-12-19 23:55:20 +00:00
Hauke Mehrtens	5b8686c303	brcm47xx: add new usb driver for bcma bus and replace ssb usb driver. This new usb driver uses an extra device so the ehci and the ohci driver are not depending on ech other any more. SVN-Revision: 29575	2011-12-19 23:39:13 +00:00
Hauke Mehrtens	1aa5a61754	kernel: update bcma and ssb to version master-2011-12-16 from wireless-testing SVN-Revision: 29574	2011-12-19 23:33:03 +00:00
Hauke Mehrtens	91d0ef6f19	brcm47xx: remove support for kernel 2.6.39 There are problems with the patches for kernel 2.6.39 and I do not want to support two different sets of patches. SVN-Revision: 29573	2011-12-19 23:26:15 +00:00
Felix Fietkau	11013ad947	ar71xx: add missing wireless led changes for wzr-hp-g300nh2 SVN-Revision: 29568	2011-12-19 09:04:15 +00:00
Felix Fietkau	0cc056cb7e	ar71xx: add support for the wzr-hp-g300nh2 Signed-off-by: Mark Deneen <mdeneen@gmail.com> SVN-Revision: 29567	2011-12-18 22:20:17 +00:00
Gabor Juhos	5a0a2b2f1b	ar71xx: use 64kraw template on more TP-Link boards SVN-Revision: 29561	2011-12-17 18:49:55 +00:00
Gabor Juhos	67c7980290	ar71xx: connect GMAC0 to the internal switch on DB120 Because the external switch has no driver yet, connect GMAC0 to the PHY4 of the internal switch for now. This allows to use the DB120 board as a router with 4LAN+1WAN ports. SVN-Revision: 29557	2011-12-15 22:25:38 +00:00
Gabor Juhos	5bbd416e38	ar71xx: add defines for the AR934X GMAC interface SVN-Revision: 29556	2011-12-15 22:25:36 +00:00
Gabor Juhos	e47a8c2bb2	ar71xx: fix GMAC1 interface speed on the DB120 board SVN-Revision: 29555	2011-12-15 22:25:35 +00:00
Gabor Juhos	36bc2c2c80	ar71xx: ag71xx: fix switch port setup for AR934X SVN-Revision: 29554	2011-12-15 22:25:32 +00:00
Gabor Juhos	00667c3846	ar71xx: ag71xx: allow to connect PHY4 to the CPU on AR934X SVN-Revision: 29553	2011-12-15 22:25:30 +00:00
Gabor Juhos	0540970345	ar71xx: ag71xx: setup switch interface mode on AR934X SVN-Revision: 29552	2011-12-15 22:25:29 +00:00
Gabor Juhos	44014110b8	ar71xx: ag71xx: detect the built-in switch of the AR934X SoCs SVN-Revision: 29551	2011-12-15 22:25:28 +00:00
Gabor Juhos	e2a546d475	ar71xx: allow to attach the internal switch for AR934x SVN-Revision: 29550	2011-12-15 22:25:22 +00:00
Gabor Juhos	9ae65588d8	ar71xx: introduce ar71xx_switch_data SVN-Revision: 29549	2011-12-15 22:25:11 +00:00
Gabor Juhos	bfe747b7d9	ar71xx: build images for TL-WR741N/ND v2 SVN-Revision: 29548	2011-12-15 22:03:48 +00:00
Gabor Juhos	aefff26624	ar71x: use raw squashfs images for TP-Link boards SVN-Revision: 29547	2011-12-15 22:03:46 +00:00
Gabor Juhos	d5bd28ffae	ar71xx: create a template for using unpadded squashfs images SVN-Revision: 29546	2011-12-15 22:03:45 +00:00
Gabor Juhos	dbc4fa4b5b	ar71xx: put squash image right after the kernel on TP-Link boards SVN-Revision: 29545	2011-12-15 22:03:44 +00:00
Gabor Juhos	850be54b72	ar71xx: tplinkpart: allow to detect JFFS2 as well SVN-Revision: 29543	2011-12-15 22:03:40 +00:00
Gabor Juhos	b7d7481b07	ar71xx: ag71xx: check PHY IDs before accessing the switch registers SVN-Revision: 29541	2011-12-15 13:25:23 +00:00
Gabor Juhos	0655552860	ar71xx: ag71xx: don't use port 4 of the switch, it is not connected on ar724x SVN-Revision: 29540	2011-12-15 13:25:21 +00:00
Gabor Juhos	204fc6bed5	ar71xx: ag71xx: nuke ar7240sw_init SVN-Revision: 29539	2011-12-15 13:25:20 +00:00
Gabor Juhos	d1f7783612	ar71xx: fix mac addresses on jjPlus devices SVN-Revision: 29538	2011-12-15 13:25:18 +00:00
Gabor Juhos	d3058b8f8c	ar71xx: build image for the Hornet-UB board SVN-Revision: 29536	2011-12-14 20:54:11 +00:00
Gabor Juhos	b9c5cb5c9a	ar71xx: add support for ALFA Network's Hornet-UB board SVN-Revision: 29535	2011-12-14 20:54:10 +00:00
Gabor Juhos	66c8cc0f6d	ar71xx: add GPIO function bit defines for AR933X SVN-Revision: 29534	2011-12-14 20:54:07 +00:00
Gabor Juhos	0c38d36488	ramips: add support for Omnima MiniEMBWiFi board This patch adds support for the Omnima MiniEMBWiFi Ralink RT3050F based board. Based on a patch by Ivan Ignjatic <ivan at omnima.co.uk> SVN-Revision: 29533	2011-12-14 20:51:26 +00:00
Felix Fietkau	7076d74b21	ar71xx: fix gpio count for ar7241/ar7242 SVN-Revision: 29532	2011-12-14 20:47:24 +00:00
Felix Fietkau	b878f4a927	ar71xx: register extra leds behind the wireless mac on wzr-hp-g450h SVN-Revision: 29531	2011-12-14 20:21:42 +00:00
Felix Fietkau	e3017bc05e	ath9k: add support for registering extra leds connected to the wmac gpio lines SVN-Revision: 29530	2011-12-14 20:21:36 +00:00
Gabor Juhos	d2717d3d47	ar71xx: get rid of squashfs-4k images SVN-Revision: 29522	2011-12-13 20:41:24 +00:00
Gabor Juhos	5afedc67e2	generic: disable 'small sector' erase in m25p80 driver This fixes the issues with the jffs2 images on various boards. Using JFFS2 on devices with 4KiB erase sectors is not safe: http://lists.infradead.org/pipermail/linux-mtd/2011-June/036591.html SVN-Revision: 29521	2011-12-13 20:41:22 +00:00
Felix Fietkau	4a441570ca	kernel: move linux/ath9k_platform.h to generic files so that it can be reused from other targets SVN-Revision: 29516	2011-12-13 15:14:59 +00:00
Felix Fietkau	3806671fe5	ar71xx: fix wireless led on wzr-hp-g450h SVN-Revision: 29515	2011-12-13 15:00:43 +00:00
Gabor Juhos	2dd7dfb1c9	ar71xx: enable AR9341 support at setup.c Patch-by: dyq <729650915@qq.com> SVN-Revision: 29514	2011-12-13 14:59:43 +00:00
Gabor Juhos	058998acdb	ar71xx: Build images for Netgear WNDRMAC and WNDRMACv2 The WNDRMAC is a WNDR3700v2 (64MB RAM, 16MB flash) in a white case. The WNDRMACv2 is a WNDR3800 (128MB RAM, 16MB flash) in a WNDRMAC case. The WNDRMAC case doesn't have "holes" or labels for the 2.4GHz LED or switch ports 2-4. The stock firmware uses a single LED (in the 5GHz position) to indicate the status of both radios, and a single LED (in the switch port 1 position) to indicate the status of all LAN ports. The "missing" LEDs are present on the board, and easily shine through the case. Unlike the stock firmware, OpenWrt will use these "hidden" LEDs. I've tested the WNDRMACv2 image. I don't have a v1 WNDRMAC, but assume that this is sufficient to build a fully-functional image. Signed-off-by: Mark Mentovai <mark@moxienet.com> SVN-Revision: 29513	2011-12-13 14:59:40 +00:00
Felix Fietkau	48f9717371	ar71xx: add gpios and usb for wzr-hp-g450h SVN-Revision: 29509	2011-12-13 13:33:44 +00:00
Gabor Juhos	4ca2d86493	ar71xx: use RedBoot parser on PB44 SVN-Revision: 29501	2011-12-11 15:52:47 +00:00
John Crispin	934eef78ca	convert to gpiolib Signed-off-by: karlp@tweak.net.au SVN-Revision: 29486	2011-12-09 07:52:10 +00:00
Gabor Juhos	6e69765559	ar71xx: fix WNDR3x00 factory image generation Factory images for WNDR3700v2 and WNDR3800 should contain these model IDs for the device: field in their DNI tags, not WNDR3700. This regressed in r29434, which redid WNDR3x00 model detection. The sixth parameter to Image/Build/Netgear is only used as the -B argument to mkdniimg, which is used to set the device: field. In r29434, this was erroneously changed to be WNDR3700 for all models. The tools to flash factory images (U-Boot's TFTP server and the factory software's upgrade utility) may refuse to honor images with incorrect device: fields in their DNI tags. Signed-off-by: Mark Mentovai <mark@moxienet.com> SVN-Revision: 29473	2011-12-07 06:55:50 +00:00
Gabor Juhos	8eb8a6e1e7	ar71xx: fix WNDR3x00 model detection Detect the model name for /tmp/sysinfo/model based on 10 bytes at offset 56 in the art (caldata) mtd partition. r29434 redid WNDR3x00 model detection, attempting to distinguish between WNDR3700v2 and WNDR3800 by checking MemTotal in /proc/meminfo. However, it contained a bug: it put the awk inside a $(...), with the result that all WNDR3700v2 and WNDR3800 models would be reported as WNDR3800. This patch checks the model name stored in the art partition, as is done by U-Boot shipping on the WNDR3800. It has the likely advantage of working with future models based on the WNDR3700 board. It also will not mis-detect units on which people install more memory. I have tested this patch on WNDR3700 (v1), WNDR3700v2, and WNDR3800. Signed-off-by: Mark Mentovai <mark@moxienet.com> SVN-Revision: 29472	2011-12-07 06:55:39 +00:00
Gabor Juhos	43bd4c6ad1	ramips: fix mac addresses on the DIR-300/600 boards SVN-Revision: 29471	2011-12-06 20:06:08 +00:00
Jonas Gorski	e33bb9ec66	linux: update 3.1 to 3.1.4 SVN-Revision: 29470	2011-12-06 19:50:30 +00:00
Jonas Gorski	6e2ae90f4a	linux: update 3.0 to 3.0.12 SVN-Revision: 29469	2011-12-06 19:50:25 +00:00
Gabor Juhos	c6b2b98812	ar71xx: create firmware image for the TL-WR740N/ND v4 boards Based on a patch by Cristian Deluxe <djcristiandeluxe@gmail.com> SVN-Revision: 29468	2011-12-06 16:26:44 +00:00
Gabor Juhos	fbfad4e9b4	ar71xx: use hw_id, hw_rev and flash_layout with mktplinkfw SVN-Revision: 29467	2011-12-06 16:26:43 +00:00
Gabor Juhos	d753e08c79	ar71xx: fix TL-MR3x20 profile names in image/Makefile SVN-Revision: 29463	2011-12-06 13:53:21 +00:00
Gabor Juhos	62d8009cdd	ar71xx: cleanup TP-Link profiles SVN-Revision: 29461	2011-12-06 10:29:25 +00:00
Gabor Juhos	f7a482d382	ar71xx: add TP-Link board detection SVN-Revision: 29459	2011-12-05 21:11:01 +00:00
Gabor Juhos	bdc2eca7de	ar71xx: use correct mac on the lan interface on several TP-LINK devices SVN-Revision: 29458	2011-12-05 21:10:58 +00:00
Gabor Juhos	0103069372	ar71xx: allow to pass negative offset values for ar71xx_init_mac SVN-Revision: 29457	2011-12-05 21:10:55 +00:00
Gabor Juhos	ada92aee62	ar71xx: don't register PCI controller on AR934x if PCIE_RC bit is not set SVN-Revision: 29456	2011-12-05 18:21:15 +00:00
Gabor Juhos	c6bcf8d1d8	ar71xx: verify hardware id of firmware images on TP-Link boards SVN-Revision: 29455	2011-12-05 18:11:51 +00:00
Gabor Juhos	5ef6ec4a31	ramips: set mac addresses for the NBG-419N Based on a patch by Nerijus Baliunas <nerijus@users.sourceforge.net> SVN-Revision: 29454	2011-12-05 17:27:07 +00:00
Gabor Juhos	750d560767	ramips: set preinit interface mac on the hw550-3g board Based on a patch by Daniel Golle <dgolle@allnet.de> SVN-Revision: 29453	2011-12-05 17:27:06 +00:00
Gabor Juhos	b5d7b359b2	ramips: use ramips_get_mac_* functions in the preinit script SVN-Revision: 29452	2011-12-05 17:27:04 +00:00
Gabor Juhos	4d5b940e66	ramips: move ramips_get_mac_* functions to lib/ramips.sh SVN-Revision: 29451	2011-12-05 17:27:03 +00:00
Gabor Juhos	cc853acb3a	ramips: add ramips_ prefix to get_mac_{binary,nvram} functions SVN-Revision: 29450	2011-12-05 17:27:02 +00:00
Gabor Juhos	b1137d48a4	ramips: fix network configuration setup SVN-Revision: 29448	2011-12-05 16:54:48 +00:00
Gabor Juhos	4dc9092f4b	ar71xx: reclaim some unused space on TP-Link boards With the default OpenWrt configuration, this increases the size of the rootfs_data partition by 384KB/128KB on the older/newer TP-Link models. SVN-Revision: 29447	2011-12-05 14:52:36 +00:00
Gabor Juhos	3e7a6d182a	ar71xx: check squashfs signature in TP-Link mtd parser SVN-Revision: 29446	2011-12-05 14:52:33 +00:00
Gabor Juhos	feebf484ba	ar71xx: use the lzma-loader on TP-Link boards w/o lzma support SVN-Revision: 29444	2011-12-05 14:52:28 +00:00
Gabor Juhos	d42968351f	ar71xx: add lzma loader SVN-Revision: 29443	2011-12-05 14:52:25 +00:00
Felix Fietkau	1f809532de	ar71xx: add preliminary support for wzr-hp-g450h SVN-Revision: 29441	2011-12-05 14:20:51 +00:00
Felix Fietkau	d1f63f8538	ar71xx: move multi-m25p80 concat code from wzr-hp-ag300h mach code to dev-m25p80.c, other buffalo routers use it as well SVN-Revision: 29440	2011-12-05 14:20:44 +00:00
Gabor Juhos	4cc2b9bb06	ar71xx: rewrite WNDR3700/3800 handling SVN-Revision: 29434	2011-12-05 13:03:54 +00:00
Jo-Philipp Wich	78699c2e51	add some missing wndr3800 base-files definitions SVN-Revision: 29433	2011-12-05 12:56:21 +00:00
Gabor Juhos	5177814ade	ar71xx: change user-space board detection SVN-Revision: 29432	2011-12-05 12:56:20 +00:00
Gabor Juhos	8a3a60fc64	ar71xx: allow WNDR3700 image creation to fail if kernel/rootfs too big SVN-Revision: 29431	2011-12-05 12:47:53 +00:00
Gabor Juhos	56c9b50006	ramips: fix argus board rootfs size Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 29422	2011-12-04 15:24:57 +00:00
Gabor Juhos	7cfa39f032	ar71xx: use the tp-link parser on the tp-link boards Also remove static partition maps. SVN-Revision: 29416	2011-12-03 18:13:31 +00:00
Gabor Juhos	514b1167c9	ar71xx: add mtd partition parser for the TP-Link boards SVN-Revision: 29415	2011-12-03 18:13:27 +00:00
Gabor Juhos	fc7fb29bae	ar71xx: run the RedBoot parser only on the RedBoot based boards SVN-Revision: 29414	2011-12-03 18:13:25 +00:00
Gabor Juhos	9cc28d5aa0	ar71xx: run the MyLoader parser only on the WP543 board SVN-Revision: 29413	2011-12-03 18:13:23 +00:00
Gabor Juhos	67a0b9aada	ar71xx: run the wrt160nl parser only on the WRT160NL board Also remove static mtd partition definitions. SVN-Revision: 29412	2011-12-03 18:13:20 +00:00
Gabor Juhos	c8acd6e013	ar71xx: allow to pass part_probe types to the m25p80 driver SVN-Revision: 29411	2011-12-03 18:13:18 +00:00
Gabor Juhos	20483faed0	ar71xx: create initramfs images for the newer TP-Link boards SVN-Revision: 29410	2011-12-03 16:57:23 +00:00
Gabor Juhos	9a2005e5e6	ar71xx: remove swconfig and wpad-mini from custom profiles SVN-Revision: 29408	2011-12-03 16:33:41 +00:00
Gabor Juhos	bc1d818610	ar71xx: add uboot-envtools to the default package list SVN-Revision: 29407	2011-12-03 16:33:40 +00:00
Gabor Juhos	a02a9c3f8b	ar71xx: reclaim unused space in WNDR3700/3800 images Patch by: Mark Mentovai <mark@moxienet.com> SVN-Revision: 29406	2011-12-03 16:33:38 +00:00
Gabor Juhos	ac82296c53	ar71xx: add a profile and build image for the OM2P board [juhosg: the name of the final image has been changed to 'openwrt-ar71xx-generic-om2p-squashfs-factory.bin'] Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> SVN-Revision: 29397	2011-12-01 22:49:05 +00:00
Gabor Juhos	f188f1bad5	ar71xx: add support for Ubiquiti AirRouter Signed-off-by: Gergely Barta <gergely.barta@printerfairkft.hu> SVN-Revision: 29395	2011-12-01 22:49:02 +00:00
Gabor Juhos	0612667c34	ar71xx: configure default led behavior for the OM2P Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> SVN-Revision: 29394	2011-12-01 22:48:59 +00:00
Gabor Juhos	3fccc3b376	ramips: enable sysupgrade on the RT-N15 board SVN-Revision: 29393	2011-12-01 22:48:58 +00:00
Gabor Juhos	4b2d1c3ad3	ramips: wrap long line in platform upgrade script SVN-Revision: 29392	2011-12-01 22:48:57 +00:00
Gabor Juhos	d622263588	ramips: add profile for the Asus RT-N15 This uses previously submitted rtl8366 kernel packages. [juhosg: The kmod-gpio-dev package has been removed from the package list.] Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 29391	2011-12-01 22:48:55 +00:00
Gabor Juhos	3a9e02fa41	ramips: setup default network configuration for RT-N15 Based on a patch by Roman Yeryomin <roman@advem.lv> SVN-Revision: 29390	2011-12-01 22:48:54 +00:00
Gabor Juhos	fc61c107f0	ramips: rt288x: add swconfig and rtl8366{s,_smi} drivers to the default profile It is needed by the RT-N15 board. SVN-Revision: 29389	2011-12-01 22:48:53 +00:00
Gabor Juhos	80221fcd2a	ramips: remove default network configuration, and generate that from uci-defaults SVN-Revision: 29387	2011-12-01 22:48:51 +00:00
Gabor Juhos	4f6c58adac	ramips: use /lib/functions/uci-defaults.sh SVN-Revision: 29386	2011-12-01 22:48:48 +00:00
Gabor Juhos	39348e387f	ar71xx: use /lib/functions/uci-defaults.sh SVN-Revision: 29385	2011-12-01 22:48:47 +00:00
Gabor Juhos	569d8de6d6	ramips: simplify uci-defaults/network script SVN-Revision: 29383	2011-12-01 22:48:45 +00:00
Gabor Juhos	66c9a351dd	ramips: setup mac and network interfaces from separate functions SVN-Revision: 29382	2011-12-01 22:48:43 +00:00
Gabor Juhos	62d18e9f9a	ramips: fix Asus RT-N15 board support Fix Asus RT-N15 flash partitions and make an image. Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 29381	2011-12-01 22:48:42 +00:00
Gabor Juhos	2dd79d55c7	ramips: Sparklan wcr-150gn board fixes * Fix partition sizes. * Add buttons and leds. * Register usb. * Remove unnecessary stuff from image Makefile * Fix rt2x00 eeprom extract. Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 29380	2011-12-01 22:48:41 +00:00
Gabor Juhos	7c678e7511	ramips: fix package name of kmod-input-gpio-buttons Based on a patch from Omnima Limited. SVN-Revision: 29379	2011-12-01 22:48:39 +00:00
Gabor Juhos	2ed38b24a8	ramips: move kmod-rt2800-pci to DEFAULT_PACKAGES Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 29378	2011-12-01 22:48:38 +00:00
Gabor Juhos	295e04084c	ramips: setup bc2 mac addresses from the generic network script SVN-Revision: 29377	2011-12-01 22:48:37 +00:00
Gabor Juhos	02f95d4fb3	ramips: combine network setup for all boards in one file Inspired by the patch from Roman Yeryomin. Thanks, Roman! This removes unnecessary duplication and simplifies network setup for new boards. It would be a one line change most likely. [juhosg: setup lan and wan interfaces for unspecified rt3x0x based boards in order to avoid regression] Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su> SVN-Revision: 29376	2011-12-01 22:48:35 +00:00
John Crispin	88cb7ae104	omap24xx: bump to 3.1.3 SVN-Revision: 29349	2011-11-28 12:46:18 +00:00
John Crispin	bf7316424c	lantiq: bump to 3.1.3 SVN-Revision: 29348	2011-11-28 10:22:58 +00:00
Nicolas Thill	5e83009a52	targets: fix CONFIG_USB_STORAGE_* inconsistency * all options were switched from bool to tristate in 2.6.30 * add/change/move them to generic, disabled by default * remove extinct CONFIG_USB_STORAGE_DPCM dropped in 2.6.29, merged with CONFIG_USB_STORAGE_SDDR09 * remove extinct CONFIG_USB_STORAGE_SIERRA option in 2.6 * cleanup ordering SVN-Revision: 29337	2011-11-25 20:47:44 +00:00
Gabor Juhos	f20797306a	ar71xx: modify phy mask of the WP543 board This fixes ethernet on newer boards. Based on a patch from #9702. SVN-Revision: 29328	2011-11-24 20:09:43 +00:00
Gabor Juhos	c20d7378e5	ar71xx: fix wndr3800 machine name This fixes the machine name in /proc/cpuinfo and luci status page machine name. Signed-off-by: Petri Rosenström <petri.rosenstrom@gmail.com> SVN-Revision: 29326	2011-11-24 20:09:38 +00:00
Gabor Juhos	600b6efc41	ar71xx: copy atheros initramfs images to the image directory SVN-Revision: 29325	2011-11-24 20:09:35 +00:00
Gabor Juhos	d97cf76790	ar71xx: specify mtd layout in command line for the DB120 board SVN-Revision: 29324	2011-11-24 20:09:32 +00:00
John Crispin	9389593db9	lantiq: drop 009-MIPS-make-oprofile-use-cp0_perfcount_irq-if-it-is-se.patch This patch is/was a duplicate of generic/patches-3.1/307-mips_oprofile_fix.patch SVN-Revision: 29294	2011-11-23 12:22:15 +00:00
John Crispin	4982ca983c	lantiq: * fixes ath5k eeprom handling * fixes sx76x * adds sx76x to userland api * minor style cleanups Signed-of-by: Andrej Vlašić <andrej.vlasic0@gmail.com> SVN-Revision: 29292	2011-11-22 18:50:51 +00:00
Florian Fainelli	718907b661	don't package gpioctl by default SVN-Revision: 29288	2011-11-21 16:36:39 +00:00
Nicolas Thill	c33f21ae95	target/uml: export atomic64_* functions on 32-bit x86 SVN-Revision: 29287	2011-11-21 14:28:33 +00:00
Gabor Juhos	9990523a0f	ar71xx: set GE0 phy_mask for AR933x SVN-Revision: 29274	2011-11-20 11:30:10 +00:00
Jo-Philipp Wich	b5739aabd9	fix D-Link DSL-2650U image generation SVN-Revision: 29266	2011-11-19 21:34:51 +00:00
Jonas Gorski	8bac0df4ae	linux: update 3.0 to 3.0.9 SVN-Revision: 29264	2011-11-19 18:39:12 +00:00
Florian Fainelli	ae90aa4efd	build images for D-Link DSL-2650U (#9003 ) SVN-Revision: 29238	2011-11-18 10:37:03 +00:00
Michael Büsch	0b86c2648a	omap24xx: Fix cbus nested IRQ acking SVN-Revision: 29237	2011-11-17 22:31:27 +00:00
Michael Büsch	df2810831c	omap24xx: Fix initialization of software IRQ mask SVN-Revision: 29236	2011-11-17 21:02:00 +00:00
Michael Büsch	3f92f7dd90	omap24xx: Update 3.1 config SVN-Revision: 29234	2011-11-17 19:35:57 +00:00
Michael Büsch	4793be2df9	omap24xx: Some retu/tahvo IRQ fixes SVN-Revision: 29233	2011-11-17 18:06:19 +00:00
Michael Büsch	630bafc5dd	omap24xx: Add basic kexec fixes. SVN-Revision: 29232	2011-11-17 14:57:34 +00:00
Michael Büsch	06c986984e	omap24xx: Add workaround for omapfb locking bug. SVN-Revision: 29201	2011-11-16 22:34:38 +00:00
Michael Büsch	0f03e17bd0	Revert r29193 SVN-Revision: 29195	2011-11-16 19:03:23 +00:00
Michael Büsch	93f02b1ba0	omap24xx: Set platform specific optimization flags SVN-Revision: 29194	2011-11-16 19:02:12 +00:00
Michael Büsch	b058e97af4	n810: Add xmodmap to profile SVN-Revision: 29193	2011-11-16 19:01:19 +00:00
Florian Fainelli	8d66465b08	include bridge and 8021q modules by default SVN-Revision: 29164	2011-11-15 22:24:22 +00:00
John Crispin	bbe96f13a6	lantiq: add runtime generation of /etc/config/network SVN-Revision: 29161	2011-11-15 18:21:00 +00:00
John Crispin	79a4642b40	lantiq: fix falcon build breakage dev-wifi-rt2x00 fails to build on falcon due to missing pci SVN-Revision: 29129	2011-11-14 18:55:58 +00:00
Gabor Juhos	f27548448b	ar71xx: fix USB LED on the DB120 board SVN-Revision: 29126	2011-11-14 17:43:15 +00:00
Gabor Juhos	6ebbb1329d	ar71xx: add a function for selecting output signal on a given GPIO pin SVN-Revision: 29125	2011-11-14 17:43:14 +00:00
Gabor Juhos	0c1d3617d7	ar71xx: fix GPIO function handling on AR934x SVN-Revision: 29124	2011-11-14 17:43:13 +00:00
Gabor Juhos	aa0c8c4885	ar71xx: add AR71XX_ prefix to GPIO_REG_* defines SVN-Revision: 29123	2011-11-14 17:43:11 +00:00
Gabor Juhos	62a7795afd	ar71xx: merge nand scan patch SVN-Revision: 29122	2011-11-14 17:43:10 +00:00
Gabor Juhos	12dae96097	ar71xx: fix a compiler warning SVN-Revision: 29110	2011-11-14 13:07:47 +00:00
Gabor Juhos	5ae0fd802c	ar71xx: fix GPIO count for AR934x SVN-Revision: 29109	2011-11-14 13:07:45 +00:00
Gabor Juhos	e52269364a	ar71xx: flush DDR writeback buffers for WMAC and PCIe on AR934X SVN-Revision: 29108	2011-11-14 11:49:53 +00:00
Gabor Juhos	3104d70552	ar71xx: use a dummy irq chip for WMAC and PCIe irq hadling SVN-Revision: 29107	2011-11-14 11:49:51 +00:00
Gabor Juhos	42e8ae09b5	ar71xx: add AR934X_RESET_REG_PCIE_WMAC_INT_STATUS defines SVN-Revision: 29106	2011-11-14 11:49:49 +00:00
Gabor Juhos	c15caea360	ar71xx: add an irq parameter for ar724x_pcibios_init SVN-Revision: 29105	2011-11-14 11:49:47 +00:00
Gabor Juhos	cf90b24bb9	ar71xx: remove hardwired interface parameters from mach-* files SVN-Revision: 29103	2011-11-14 07:38:09 +00:00
Gabor Juhos	defc79cb40	ar71xx: force hardwired interface parameters in ar71xx_add_device_eth SVN-Revision: 29102	2011-11-14 07:38:07 +00:00
Gabor Juhos	6f4bc1ce37	ar71xx: use if-else instead of conditional operators in ar71xx_add_device_eth SVN-Revision: 29101	2011-11-14 07:38:05 +00:00
Florian Fainelli	7f787707de	build images for Pirelli A226M (#10409 ) SVN-Revision: 29045	2011-11-13 19:19:22 +00:00
Florian Fainelli	5dc2098448	register uart0 on DWV-S0 boards (#10409 ) SVN-Revision: 29044	2011-11-13 19:19:18 +00:00
Florian Fainelli	56a96ba876	refresh 3.0 patches SVN-Revision: 29043	2011-11-13 19:19:14 +00:00
Florian Fainelli	54da5cf11f	refresh 2.6.39 patches SVN-Revision: 29042	2011-11-13 19:19:10 +00:00
Florian Fainelli	717a4391d7	rename 456-board_DWV-S0_ehci.patch to 456-board_DWV-S0_fixes.patch SVN-Revision: 29041	2011-11-13 19:19:05 +00:00
Florian Fainelli	c093c9df34	fix typo, load ip17xx switch module SVN-Revision: 29039	2011-11-13 18:41:26 +00:00
Gabor Juhos	368bbc510b	ar71xx: enable has_gbit flag on AR724{0,1} SVN-Revision: 29026	2011-11-13 17:36:36 +00:00
Gabor Juhos	15d7016c9f	ar71xx: fixup onboard PCIe chip registration on the DB120 board SVN-Revision: 29022	2011-11-13 12:48:03 +00:00
Gabor Juhos	f623066e60	ar71xx: drop DB120_WMAC_MAC_OFFSET, it is not needed SVN-Revision: 29021	2011-11-13 12:48:01 +00:00
Gabor Juhos	d2316b2a45	ar71xx: ag71xx: add support for getting switch port link status SVN-Revision: 29017	2011-11-13 11:27:04 +00:00
Gabor Juhos	d0db89133c	ar71xx: remove mii_ctrl resources of the ethernet devices SVN-Revision: 29016	2011-11-13 11:27:03 +00:00
Gabor Juhos	34015ed6e8	ar71xx: ag71xx: remove unused mii_ctrl field from struct ag71xx SVN-Revision: 29015	2011-11-13 11:27:01 +00:00
Gabor Juhos	2d882cff23	ar71xx: ag71xx: remove unused mii_cfg related functions and defines SVN-Revision: 29014	2011-11-13 11:27:00 +00:00
Gabor Juhos	538a9493b9	ar71xx: set MII interface speed from the set_speed callbacks SVN-Revision: 29013	2011-11-13 11:26:59 +00:00
Gabor Juhos	93cd46be13	ar71xx: rename set_pll callback to set_speed in ag71xx_platform_data Also rename the corresponding callback functions. SVN-Revision: 29012	2011-11-13 11:26:57 +00:00
Gabor Juhos	9579bb4267	ar71xx: ag71xx: remove MII interface setup code SVN-Revision: 29011	2011-11-13 11:26:56 +00:00
Gabor Juhos	da64ce8603	ar71xx: configure MII interface type from ar71xx_setup_phy_if_mode SVN-Revision: 29010	2011-11-13 11:26:54 +00:00
Gabor Juhos	0112153a0e	ar71xx: fix occasional kernel hangs during boot on AR934x The patch taken from the linux-mips mailing list. The Kernel hangs occasionally during boot after "Calibrating delay loop..". This is caused by the c0_compare_int_usable() routine in cevt-r4k.c returning false which causes the system to disable the timer and hang later. The false return happens because the routine is using a series of four calls to irq_disable_hazard() as a delay while it waits for the timer changes to propagate to the cp0 cause register. On newer MIPS cores, like the 74K, the series of irq_disable_hazard() calls turn into ehb instructions and can take as little as a few clock ticks for all 4 instructions. This is not enough of a delay, so the routine thinks the timer is not working. This fix uses up to a max number of cycle counter ticks for the delay and uses back_to_back_c0_hazard() instead of irq_disable_hazard() to handle the hazard condition between cp0 writes and cp0 reads. SVN-Revision: 29009	2011-11-13 11:26:52 +00:00
Gabor Juhos	1afc76ea13	ar71xx: refresh kernel patches SVN-Revision: 29008	2011-11-13 11:26:51 +00:00
Jonas Gorski	d8acb75009	linux: update 3.1 to 3.1.1 SVN-Revision: 29007	2011-11-13 10:48:05 +00:00
John Crispin	a8797d0de6	lantiq: add uci-defaults code for handling leds SVN-Revision: 29004	2011-11-12 23:40:21 +00:00
John Crispin	832e02cd77	lantiq: add /lib/lantiq.sh and make hotplug handlers use it SVN-Revision: 29003	2011-11-12 23:40:16 +00:00
John Crispin	5dcbbf0160	lantiq: rename leds SVN-Revision: 29002	2011-11-12 23:40:12 +00:00
John Crispin	d84b7596d9	lantiq: split compat headers out of bsp header patch SVN-Revision: 29001	2011-11-12 23:40:07 +00:00
John Crispin	2cff80f015	lantiq: adds hotplug handler for loading rt2x00 firmware SVN-Revision: 29000	2011-11-12 23:40:01 +00:00
John Crispin	3660c51c40	lantiq: adds hotplug handler for handling buttons and makes w303v work with it SVN-Revision: 28999	2011-11-12 23:39:56 +00:00
John Crispin	4248705108	lantiq: cleanup default package selection SVN-Revision: 28998	2011-11-12 23:39:51 +00:00
John Crispin	eb20ab87e6	lantiq: w303v has its rt2860 eep on the nor flash. tell compat-wireless how to use it SVN-Revision: 28994	2011-11-12 18:41:15 +00:00
Gabor Juhos	bbfaaeffd6	kernel: ar8216: add support for the AR8236 switch SVN-Revision: 28993	2011-11-12 14:09:52 +00:00
Gabor Juhos	ecb3690d0a	kernel: ar8216: move port vlan setup into a separate function SVN-Revision: 28992	2011-11-12 14:09:50 +00:00
Gabor Juhos	5ad763075e	ar71xx: use the button for WPS control on the DB120 SVN-Revision: 28990	2011-11-12 12:50:20 +00:00
Gabor Juhos	4555be2bec	ar71xx: register the second ethernet interface on the DB120 board SVN-Revision: 28989	2011-11-12 12:50:19 +00:00
Gabor Juhos	368c6605a0	ar71xx: implement SoC specific phy interface setup SVN-Revision: 28988	2011-11-12 12:50:18 +00:00
Gabor Juhos	21d317b9cc	ar71xx: move phy interface setup into a separate function SVN-Revision: 28987	2011-11-12 12:50:16 +00:00
Gabor Juhos	aff0c84ffa	ar71xx: register both MDIO bus on the DB120 board SVN-Revision: 28986	2011-11-12 12:09:59 +00:00
Gabor Juhos	b144249108	ar71xx: add AR934X specific MDIO registration code SVN-Revision: 28985	2011-11-12 12:09:56 +00:00
Gabor Juhos	f835106c8c	ar71xx: add a secondary mdio bus SVN-Revision: 28984	2011-11-12 12:09:54 +00:00
Gabor Juhos	90a42da270	ar71xx: rename ar71xx_mdio_* structures to ar71xx_mdio0_* SVN-Revision: 28983	2011-11-12 12:09:50 +00:00
Gabor Juhos	9daa2149fd	ar71xx: add an id argument to ar71xx_add_device_mdio SVN-Revision: 28982	2011-11-12 12:09:48 +00:00
Gabor Juhos	b07b687aec	ar71xx: pass netdev and miidev pointer to ar71xx_add_device_dsa SVN-Revision: 28981	2011-11-12 12:09:42 +00:00
Gabor Juhos	a9216bb76e	ar71xx: add AR934x specific USB setup SVN-Revision: 28980	2011-11-12 10:54:20 +00:00
Gabor Juhos	346e44105a	ar71xx: register the first ethernet interface on the DB120 board SVN-Revision: 28979	2011-11-12 10:54:18 +00:00
Gabor Juhos	b1ba5e2f3d	ar71xx: allow to register ethernet interfaces for AR934X SVN-Revision: 28978	2011-11-12 10:54:17 +00:00
Gabor Juhos	2f9e535e89	ar71xx: ag71xx: use fixed link parameters if the mii bus is not registered SVN-Revision: 28977	2011-11-12 10:54:16 +00:00
Gabor Juhos	e962b07c8b	ar71xx: add AR934X specific bootstrap and reset register bits SVN-Revision: 28976	2011-11-12 10:54:15 +00:00
Gabor Juhos	d461fdd519	ar71xx: add diag support for the DB120 board SVN-Revision: 28975	2011-11-12 10:54:10 +00:00
Gabor Juhos	d8db8e94c8	ar71xx: fix GPIO direction setup for AR934x SVN-Revision: 28974	2011-11-12 10:54:09 +00:00
Gabor Juhos	43e993e5f5	ar71xx: fix AR934X clock frequency calculation SVN-Revision: 28973	2011-11-12 10:54:08 +00:00
Gabor Juhos	8687fc3e41	ar71xx: generate ubootenv from uci-defaults instead of providing defconfig I noticed most of /etc/defconfig was replaced by /etc/uci-defaults, which is indeed much nicer. So I moved over ubootenv from having a defconfig-entry to also be generated from uci-defaults. Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 28971	2011-11-12 10:54:04 +00:00
John Crispin	fda4ee22a0	lantiq: improve falcon package selection SVN-Revision: 28962	2011-11-11 21:59:11 +00:00
John Crispin	e1dc73be90	lantiq: fix breakage introduced in 3.1 bump SVN-Revision: 28961	2011-11-11 21:59:01 +00:00
Jo-Philipp Wich	be49daffc8	base-files, target: assign name to system timeserver section, makes it easier to set servers on the cli SVN-Revision: 28933	2011-11-10 12:16:41 +00:00
Jonas Gorski	f53128f79b	target: linux: mtd: fix MTDREFRESH to an arbitrary high number To make the ioctl number "stable", use an arbitrary high number to prevent conflicts with new mtd ioctls that would push MTDREFRESH's number. Also make mtd use the in-kernel mtd headers. SVN-Revision: 28893	2011-11-09 21:16:36 +00:00
Felix Fietkau	7a2efd8c28	ar71xx: remove dead code SVN-Revision: 28851	2011-11-08 00:33:20 +00:00
Felix Fietkau	94309039b7	ar71xx: on ar7240, exclude ports from their own port vlan destination mask SVN-Revision: 28850	2011-11-08 00:33:15 +00:00
Felix Fietkau	b06efd636a	kernel: add a top level menuconfig option for enabling lockdep SVN-Revision: 28848	2011-11-08 00:32:57 +00:00
Gabor Juhos	87704b8078	ar71xx: create TL-WA901ND network config from uci-defaults SVN-Revision: 28833	2011-11-07 21:44:24 +00:00
Gabor Juhos	09fdfa444f	ar71xx: create ALL0258N network config from uci-defaults SVN-Revision: 28832	2011-11-07 21:44:23 +00:00
Gabor Juhos	63348f5fed	ar71xx: create NBG{460N,550N,550NH} network config from uci-defaults SVN-Revision: 28831	2011-11-07 21:44:20 +00:00
Gabor Juhos	c3692c8331	ar71xx: create WZR-HP-G300NH network config from uci-defaults SVN-Revision: 28830	2011-11-07 21:44:17 +00:00
Gabor Juhos	ee1a07a11d	ar71xx: create RB-493G network config from uci-defaults SVN-Revision: 28829	2011-11-07 21:44:12 +00:00
Gabor Juhos	d82d063d81	ar71xx: create TL-WR1043ND network config from uci-defaults SVN-Revision: 28828	2011-11-07 21:44:11 +00:00
Gabor Juhos	68be590894	ar71xx: create WRT160NL network config from uci-defaults SVN-Revision: 28827	2011-11-07 21:44:09 +00:00
Gabor Juhos	83901e47c9	ar71xx: create PB92 network config from uci-defaults SVN-Revision: 28826	2011-11-07 21:44:08 +00:00
Gabor Juhos	22ab9fc9ad	ar71xx: create DIR-825-B1 network config from uci-defaults SVN-Revision: 28825	2011-11-07 21:44:07 +00:00
Gabor Juhos	e866ba5753	ar71xx: create TL-WR{841N-v1,941ND} network config from uci-defaults SVN-Revision: 28824	2011-11-07 21:44:03 +00:00
Gabor Juhos	9298c7afe5	ar71xx: create RB-450 network config from uci-defaults SVN-Revision: 28823	2011-11-07 21:44:02 +00:00
Gabor Juhos	ac256f97bd	ar71xx: create RB-450G, RouterStation Pro network config from uci-defaults SVN-Revision: 28822	2011-11-07 21:44:01 +00:00
Gabor Juhos	944ac3f6cf	ar71xx: create RB-433{,U} network config from uci defaults SVN-Revision: 28821	2011-11-07 21:43:58 +00:00
Gabor Juhos	6e8390ae6c	ar71xx: create even more network configs from the uci-defaults script Create the default network configuration dynamically for the AR724x/AR9331 boards. Some other boards are using the same configuration, so convert those as well. SVN-Revision: 28820	2011-11-07 21:43:56 +00:00
Gabor Juhos	b62560413a	ar71xx: create more network configs from the uci-defaults script Create the default network configuration dynamically for the boards with swapped eth0, eth1 interfaces. SVN-Revision: 28819	2011-11-07 21:43:54 +00:00
Gabor Juhos	6c92b26bac	ar71xx: create a bunch of network configs from the uci-defaults script Create the default network configuration dynamically for the boards with a single ethernet interface. SVN-Revision: 28818	2011-11-07 21:43:52 +00:00
Gabor Juhos	0a8e5dbf7b	ar71xx: create generic network config from an uci-defaults script SVN-Revision: 28817	2011-11-07 21:43:51 +00:00
Gabor Juhos	54c034ae7a	ar71xx: remove AP81 defconfig, it is the same as the generic config SVN-Revision: 28816	2011-11-07 21:34:33 +00:00
Gabor Juhos	5b6cc3eb9f	ar71xx: change generated Buffalo firmware versions With version 1.76 the upgrade may fail with newer Buffalo firmwares with a message like this: "You can not update the firmware because the firmware version is earlier than 1.82. Please use 1.82 or later version for firmware update." SVN-Revision: 28815	2011-11-07 21:34:32 +00:00
Imre Kaloz	cc2cf8f3d5	update 3.1 patches SVN-Revision: 28814	2011-11-07 21:13:13 +00:00
Imre Kaloz	c4bc2552a3	update arm mach-types SVN-Revision: 28813	2011-11-07 21:12:26 +00:00
Gabor Juhos	eb9ef60e2d	ar71xx: enable sysupgrade on the WHR-G301N and WHR-HP-GN boards SVN-Revision: 28812	2011-11-07 20:25:00 +00:00
Gabor Juhos	8456840d82	ar71xx: wrap long lines in the upgrade script SVN-Revision: 28811	2011-11-07 20:24:59 +00:00
Gabor Juhos	c60baf78ce	ar71xx: fix WHR-HP-G300N firmware partition offset SVN-Revision: 28810	2011-11-07 20:24:57 +00:00
Gabor Juhos	b27254a2c5	ar71xx: add default network configuration for the WHR-HP-GN SVN-Revision: 28807	2011-11-07 13:32:43 +00:00
Gabor Juhos	034b2b7cde	ar71xx: build image for the Buffalo WHR-HP-GN SVN-Revision: 28806	2011-11-07 12:59:11 +00:00
Gabor Juhos	a801d620a7	ar71xx: add support for the Buffalo WHR-HP-GN board SVN-Revision: 28805	2011-11-07 12:59:10 +00:00
Gabor Juhos	0d9ae0a036	ar71xx: build image for the Buffalo WHR-G301N SVN-Revision: 28804	2011-11-07 12:59:08 +00:00
Gabor Juhos	4509af17ed	ar71xx: add support for the Buffalo WHR-G301N board SVN-Revision: 28803	2011-11-07 12:59:07 +00:00
Gabor Juhos	63784ea2bc	ar71xx: fix WHR-HP-G300N image generation SVN-Revision: 28802	2011-11-07 12:59:05 +00:00
Gabor Juhos	b3b21cb3bf	ar71xx: enable WHR-HP-G300N support in kernel config SVN-Revision: 28801	2011-11-07 12:59:04 +00:00
Gabor Juhos	4aace1e2e3	ar71xx: fix WHR-HP-G300N MTD partitions SVN-Revision: 28800	2011-11-07 12:59:03 +00:00
Michael Büsch	05ce57c005	omap24xx: Add cbus tahvo locking fix. SVN-Revision: 28767	2011-11-05 16:10:18 +00:00
Michael Büsch	6288ac7ed4	omap24xx: Fix n810bm compilation SVN-Revision: 28766	2011-11-05 16:01:53 +00:00
Gabor Juhos	297ac9a7f1	kernel: swconfig: add a missing unlock in error path SVN-Revision: 28753	2011-11-04 14:38:31 +00:00
Jo-Philipp Wich	d6f02b62d4	add timeserver config to target specific system configs as well SVN-Revision: 28750	2011-11-04 12:53:35 +00:00
Felix Fietkau	82bd0a43f1	kernel: merge regression fixes for the netfilter patches to the 3.1 kernel patches (patch by tripolar) SVN-Revision: 28734	2011-11-03 20:02:31 +00:00
John Crispin	95d36d3efe	lantiq: remove obseleted folder. we use 3.1 now SVN-Revision: 28728	2011-11-03 16:33:27 +00:00
John Crispin	ea36ad76bc	lantiq: bump to 3.1 SVN-Revision: 28721	2011-11-03 15:15:52 +00:00
Gabor Juhos	4c985724af	ar71xx: add missing AR71XX_MACH_TL_WR741ND_V4 SVN-Revision: 28709	2011-11-01 14:38:12 +00:00
Gabor Juhos	fc8adbb854	ar71xx: build image for the TL-WR741ND v4 board SVN-Revision: 28708	2011-11-01 11:20:55 +00:00
Gabor Juhos	91f08d47c2	ar71xx: add initial support for the TL-WR741ND v4 board The ethernet port LEDs are not working yet. SVN-Revision: 28706	2011-11-01 11:20:52 +00:00
Gabor Juhos	21e651c9a1	ar71xx: add AR933X GMAC register defines SVN-Revision: 28705	2011-11-01 11:20:50 +00:00
Gabor Juhos	43e2e2e4ef	ar71xx: combine LEDs setup in one file SVN-Revision: 28704	2011-11-01 11:20:49 +00:00
Gabor Juhos	f372620ffa	ar71xx: unify LED names on Planex boards SVN-Revision: 28703	2011-11-01 11:20:47 +00:00
Gabor Juhos	66ab406d5a	ar71xx: unify LED names on Buffalo boards SVN-Revision: 28702	2011-11-01 11:20:46 +00:00
Gabor Juhos	e7586959df	ar71xx: unify LED names on TP-Link boards SVN-Revision: 28701	2011-11-01 11:20:44 +00:00
Gabor Juhos	3a7b12a27d	ar71xx/all0258n: sysupgrade support U-Boot on the ALL0258N needs offset, size and md5 for kernel and rootfs to be stored in the U-Boot environment. If the checksums don't match during boot, a failsafe-system is booted instead. This patch adds a board-specific sysupgrade hack for the all0258n which calculates and updates the checksums for the U-Boot environment. Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 28700	2011-11-01 09:23:32 +00:00
Gabor Juhos	f40557a692	ar71xx/all0258n: add default config This adds default network and uboot-env settings for the ALL0258N. Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 28699	2011-11-01 09:23:31 +00:00
Gabor Juhos	06d9653b36	ar71xx: remove default network config of the mzk-w04nu board as well It works with the generic config. SVN-Revision: 28695	2011-11-01 09:23:25 +00:00
Gabor Juhos	693c777eaf	ar71xx: remove LED setup of nonexistent interfaces on RB750 SVN-Revision: 28693	2011-10-31 14:26:56 +00:00
Gabor Juhos	2bcd612e72	ar71xx: remove default network config of the wnr2000 board It is the same as the generic configuration. SVN-Revision: 28692	2011-10-31 14:26:51 +00:00
Vasilis Tsiligiannis	17ccd4aec4	rt305x: Create factory image for Fonera 2.0n SVN-Revision: 28689	2011-10-31 09:23:44 +00:00
Michael Büsch	29958120a2	omap24xx: Default to linux-3.1 SVN-Revision: 28687	2011-10-30 22:42:00 +00:00
Michael Büsch	c00fd42353	omap24xx: Fix n810 LCD initialization SVN-Revision: 28685	2011-10-30 20:31:45 +00:00
Michael Büsch	f37c24d35f	omap24xx: Fix n810 boot SVN-Revision: 28683	2011-10-30 18:46:45 +00:00
Gabor Juhos	39b3bfcf6a	ar71xx/sysupgrade: use $magic_long instead of $magic when comparing with a 32-bit value Aparently $magic_long was meant here instead of $magic when comparing with 32-bit values. Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 28678	2011-10-30 13:06:30 +00:00
Michael Büsch	fd0e6e1452	omap24xx: Refresh 3.1 config SVN-Revision: 28677	2011-10-29 22:52:44 +00:00
Michael Büsch	ba9ee13744	omap24xx: Refresh 3.1 patches SVN-Revision: 28676	2011-10-29 22:52:07 +00:00
Michael Büsch	e184bfe6f0	Fix tusb patch SVN-Revision: 28675	2011-10-29 22:33:59 +00:00
Michael Büsch	a3db2f2055	omap24xx: Fix MUSB compile SVN-Revision: 28674	2011-10-29 22:26:27 +00:00
Michael Büsch	5dde93038f	omap24xx: Add n800 touchscreen and keypad drivers. Thanks to Marat Radchenko. SVN-Revision: 28673	2011-10-29 20:35:36 +00:00
Michael Büsch	7d123a86e3	omap24xx: Add 3.1 patchset. SVN-Revision: 28672	2011-10-29 19:02:50 +00:00
Gabor Juhos	415814f051	ar71xx: fix typos in image/Makefile SVN-Revision: 28618	2011-10-27 07:54:52 +00:00
Gabor Juhos	1646346798	ar71xx: add initial support for the OpenMesh OM2P board Based on a patch by Marek Lindner <marek@open-mesh.com> SVN-Revision: 28617	2011-10-27 07:54:51 +00:00
Gabor Juhos	d02f22fea1	ar71xx/all0258n: fix partition layout A miscalculation in the original patch makes OpenWrt destroy the failsafe image. Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 28615	2011-10-27 07:54:47 +00:00
Michael Büsch	f15f6bc76f	Update my email address SVN-Revision: 28603	2011-10-26 14:54:26 +00:00
Felix Fietkau	b17bfe4f68	x86: disable crashlog, ioremap of RAM does not work properly here SVN-Revision: 28599	2011-10-26 11:49:25 +00:00
Gabor Juhos	4a70cace09	ar71xx: create image for the WNDR3800 This adds support for the Netgear WNDR3800, it is almost the same as the WNDR3700v2. It just has more RAM so the hd_id had to be adjusted. Signed-off-by: Petri Rosenström <petri.rosenstrom@gmail.com> SVN-Revision: 28597	2011-10-26 06:12:47 +00:00
Jo-Philipp Wich	3d1d93cb0c	target: remove CONFIG_IDE_PROC_FS support as well SVN-Revision: 28586	2011-10-25 16:40:06 +00:00
Jo-Philipp Wich	de7cae82e9	brcm47xx: revert accidentially added EARLY_PRINTK symbol from previous commit SVN-Revision: 28585	2011-10-25 16:19:52 +00:00
Jo-Philipp Wich	a9e64493d8	target: globally disable BSD process accounting SVN-Revision: 28584	2011-10-25 16:18:36 +00:00
Gabor Juhos	ee8077f0fe	ramips: Support for NexAira BC2 The preconfiguration of the USB LED has benn move to the /etc/uci-defaults/leds script. [juhosg] Signed-off-by: Adam Porter <porter.adam at gmail.com> SVN-Revision: 28571	2011-10-24 21:49:36 +00:00
Gabor Juhos	18452a753b	ramips: fix switch-port assignment for HW550-3G WAN is on swtich port 0 for Aztech HW550-3G. Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 28570	2011-10-24 21:49:32 +00:00
Gabor Juhos	68a01c0180	ramips: combine led setup for all boards in one file This removes unnecessary duplication and simplifies led setup for new boards. It would be a one line change most likely. Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su> SVN-Revision: 28569	2011-10-24 21:49:31 +00:00
Gabor Juhos	c8b9086ac5	ar71xx: build image for the Buffalo WHR-HP-G300N Based on a patch by Yoichi Shinoda <shinoda@jaist.ac.jp> SVN-Revision: 28568	2011-10-24 21:49:29 +00:00
Gabor Juhos	9d51cda2db	ar71xx: Buffalo WHR-HP-G300N kernel support The initial support for the Buffalo WHR-HP-G300N box. The code was confirmed to boot and run, but not tested in depth. Known problem: iw phy phy0 info shows: Coverage class: 0 (up to 0m) Available Antennas: TX 0 RX 0 Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp> SVN-Revision: 28567	2011-10-24 21:49:26 +00:00
Gabor Juhos	0ab6be2ba3	ar71xx: build image for the Allnet ALL0258N board Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 28565	2011-10-24 21:49:23 +00:00
Gabor Juhos	d96e321bd1	ar71xx: add kernel support for the Allnet ALL0258N board This patchs adds support for the Allnet ALL0258N outdoor AP/bridge. The ALL0258N is based on the AR7240 SoC paired with an AR9285 radio, it got 8MB of NOR and 32MB SDRAM. Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 28564	2011-10-24 21:49:21 +00:00
Gabor Juhos	ef41e0a61c	ar71xx: don't override CONFIG_FSNOTIFY SVN-Revision: 28563	2011-10-24 21:49:18 +00:00
Jo-Philipp Wich	b61de9c865	base-files: make sure inittab-console-fixup returns with success (#10275 ) SVN-Revision: 28562	2011-10-24 21:35:43 +00:00
Nicolas Thill	b0d9bccafc	x86: allow VDI & VMDK images for all subtargets (closes: #10255 ) SVN-Revision: 28518	2011-10-22 13:09:15 +00:00
Jonas Gorski	40d088446f	linux: generic: refresh patches for 3.1-rc10 Hopefully the last one and identical to final. SVN-Revision: 28492	2011-10-20 10:32:44 +00:00
Jonas Gorski	a136b67604	linux: ar71xx: add support for Mikrotik Routerboard RB493G SVN-Revision: 28423	2011-10-11 23:05:16 +00:00
Jonas Gorski	03f91068d1	ar71xx: add a workaround for ar8316 not always driving the TA bit to low AR8316 behind a GPIO bitbanged MDIO bus fails to drive the turnaround bit to low despite returning a valid value. Ignore it and just use the returned value anyway. SVN-Revision: 28422	2011-10-11 23:05:13 +00:00
Jonas Gorski	b7a2a74823	ar8216: use mdiobus_{read,write} to ensure proper locking SVN-Revision: 28421	2011-10-11 23:05:10 +00:00
John Crispin	0a866293bd	* update patches to 3.0 * add basic vr9 support * backport 3.1 fixes * backport 3.2 queue (falcon) SVN-Revision: 28405	2011-10-10 15:13:46 +00:00
Jonas Gorski	c674c874b7	ag71xx: close a race between the phy state machine and link state A fast stop/start cycle could leave the ag71xx interrupts and tx engine disabled when using a phy driver with a fixed link and the start/stop happens between two phy state machine polls. Prevent this by always forcing the link down on stop regardless of phy state and having a phy connected. SVN-Revision: 28380	2011-10-08 11:37:14 +00:00
Jo-Philipp Wich	ce5e1abbb7	add IDs for Huawai K3770, K3771, K4510 and K4511 to option driver SVN-Revision: 28376	2011-10-06 18:23:16 +00:00
Florian Fainelli	829ae01f16	add missing kernel config symbols SVN-Revision: 28363	2011-10-04 09:15:37 +00:00
Daniel Dickinson	b0345ef184	Was specifying input-polled-keys and not input-keys-polled as the module name. Philip Prindeville - 2011-10-03 03:58:17 SVN-Revision: 28357	2011-10-03 04:39:54 +00:00
Daniel Dickinson	c0a625ffbf	Add patch for linux-3.0 as well. Fix typo from previous submission with input-keys-polled. Philip Prindeville - 2011-10-03 01:44:55 SVN-Revision: 28356	2011-10-03 03:09:20 +00:00
Daniel Dickinson	7e372b6dcf	New x86 platform specific symbol needed for 3.1-rc3.	2011-10-03 03:06:29 +00:00
Daniel Dickinson	541aa8e38e	A lot of these options get set automatically when Geode is selected. Don't make the config more complicated than it needs to be. Philip Prindeville - 2011-08-29 03:15:27 SVN-Revision: 28353	2011-10-03 03:02:42 +00:00
Florian Fainelli	3802769ea1	add vlan definitions for Siemens SE505v2 Hi, this patch adds the correct vlan definitions for the Siemens SE505v2. It applies to trunk as well as backfire (please apply here too). On backfire this also patches brcm-2,4, because brcm47xx base-files is just symlinked to brcm-2.4. It also fixes two whitespace issues. Tested with brcm47xx on both trunk and backfire branch and works as expected. Signed-off-by: Manuel Munz <freifunk@somakoma.de> SVN-Revision: 28336	2011-09-30 12:55:33 +00:00
John Crispin	aecc73de77	The enable function was using the global timeout variable for local operations. This resulted in the value of the global variable being corrupted, thus breaking the code. SVN-Revision: 28310	2011-09-26 10:35:51 +00:00
John Crispin	1ef8066bff	* remove obseleted m25p80 patch SVN-Revision: 28309	2011-09-26 09:36:02 +00:00
John Crispin	cf59e7255d	* rebase 3.0 patches * fold some fixes into existing patches SVN-Revision: 28308	2011-09-26 09:35:02 +00:00
Gabor Juhos	6ac4156136	ar71xx: fix MAC addresses on the DIR-825-B1 board Patch-by: Lukas Kuna SVN-Revision: 28295	2011-09-23 19:56:39 +00:00
Gabor Juhos	e45d7d7006	ar71xx: enable login only on the system console by default SVN-Revision: 28294	2011-09-23 19:56:38 +00:00
Alexandros C. Couloumbis	5fc14dfb87	linux/generic: commit an upstream kernel 3.0 patch (fixes busubox-1.19.2 build failure) SVN-Revision: 28293	2011-09-23 10:00:13 +00:00
Gabor Juhos	49ac36e818	ar71xx: build images for the TP-Link TL-WR703N v1 board Based on a patch by dongyuqi <729650915@qq.com> SVN-Revision: 28279	2011-09-21 11:47:56 +00:00
Gabor Juhos	733399600f	ar71xx: add support for the TP-Link TL-WR703N v1 board Based on a patch by dongyuqi <729650915@qq.com> SVN-Revision: 28277	2011-09-21 11:47:53 +00:00
Gabor Juhos	d3617ac7d3	ar71xx: add AR933x specific USB setup function SVN-Revision: 28276	2011-09-21 11:47:51 +00:00
Gabor Juhos	91340d8af7	ar71xx: add ar71xx_device_reset_rmw helper SVN-Revision: 28275	2011-09-21 11:47:50 +00:00
Gabor Juhos	9fa51d5c38	ar71xx: fix copy&paste bug in WZRHPAG300H profile description SVN-Revision: 28274	2011-09-21 11:47:48 +00:00
Gabor Juhos	079e746fc4	ar71xx: remove 'default [yn]' from machine Kconfig entries SVN-Revision: 28273	2011-09-21 11:47:47 +00:00
Gabor Juhos	73dac07c44	ar71xx: sort AR71XX_MACH_* entries SVN-Revision: 28272	2011-09-21 11:47:45 +00:00
Gabor Juhos	ef2431c8d9	ar71xx: create image for the TP-Link TL-WR743ND v1 Same hardware as WR741ND but with PoE support. Signed-off-by: Paul Fertser <fercerpav@gmail.com> SVN-Revision: 28271	2011-09-21 11:47:44 +00:00
Gabor Juhos	76d0d1a837	ar71xx: create image for the TP-Link TL-WR740N v3 Signed-off-by: Martin Raykov <martin.raykov@gmail.com> SVN-Revision: 28269	2011-09-21 11:47:40 +00:00
Gabor Juhos	93c093057d	generic: jumbo frames support for rtl8366s This patch adds the option to enable jumbo frames on the rtl8366s switch. This is almost exactly the same as the first patch at https://dev.openwrt.org/ticket/7977 and it has been requested in a comment there. I have tested this and it successfully allows devices on the switch using jumbo frames to communicate. Signed-off-by: Ash Hughes <ashley.hughes@blueyonder.co.uk> SVN-Revision: 28267	2011-09-21 11:47:38 +00:00
Jo-Philipp Wich	34f2cfc657	fix generation for arm platforms Based on patch by Roman Yeryomin <roman@advem.lv> SVN-Revision: 28225	2011-09-13 07:39:14 +00:00
Felix Fietkau	1bdf65f580	ar71xx: fix register range check for DMA stuck checks (thx, Frédéric Moulins) SVN-Revision: 28213	2011-09-11 17:44:12 +00:00
Jo-Philipp Wich	1e24383ae6	Various enhancements from Manuel Munz <freifunk@somakoma.de> - don't regenerate Package index unless the packagedir changes - remove opkg lists from rootfs, saves > 1MB uncompressed - don't direct errors on index creation into packagelist SVN-Revision: 28205	2011-09-09 17:25:20 +00:00
Jo-Philipp Wich	ba46c7b3c6	Xen DomU: make sure kernel is gzip compressed, pygrub cannot handle xz SVN-Revision: 28197	2011-09-08 22:18:26 +00:00
Felix Fietkau	65d809ef19	ar71xx: do not count normal interrupts as spurious (fixes #10037 ) SVN-Revision: 28182	2011-09-06 05:38:23 +00:00
Felix Fietkau	de8cabe839	ar71xx: clean up profiles, put in kmod-ath9k and wpad-mini by default (fixes #9954 ) SVN-Revision: 28173	2011-09-05 18:37:48 +00:00
Imre Kaloz	ed2c8bdc92	upgrade testing kernel support to 3.1 SVN-Revision: 28165	2011-09-04 15:06:05 +00:00
Imre Kaloz	4f0b1a6602	cleanup config SVN-Revision: 28164	2011-09-04 15:02:37 +00:00
Imre Kaloz	0569cff6e1	refresh patches SVN-Revision: 28163	2011-09-04 15:01:56 +00:00
Imre Kaloz	6d17e13cde	add missing symbols SVN-Revision: 28162	2011-09-04 15:01:25 +00:00
Felix Fietkau	24dfe525c2	brcm47xx: fix padding of trx images, padjffs2 does not work properly on empty files by default SVN-Revision: 28125	2011-08-29 21:23:51 +00:00
Felix Fietkau	cd2c68501c	ar71xx: fix ethernet PLL setting on ar7242 SVN-Revision: 28124	2011-08-29 21:23:46 +00:00
Hamish Guthrie	cc037a5e27	Remove subpage align patch SVN-Revision: 28086	2011-08-25 11:49:55 +00:00
Hamish Guthrie	21f7943561	Re-order patches, add nand sub-page alignment SVN-Revision: 28084	2011-08-25 10:37:30 +00:00
Florian Fainelli	cbd28ad0ec	bump to 2.6.39.4 Since linux gets developed on x86 more than all other hardware, hardly makes sense to have our default x86 version be trailing by over a year. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> SVN-Revision: 28082	2011-08-25 09:35:51 +00:00
Florian Fainelli	d2652dee9d	update alix2 platform driver Add support for Ed Wildgoose's alix platform driver plus my enhancement to add GPIO soft button support. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> SVN-Revision: 28081	2011-08-25 09:35:45 +00:00
Jonas Gorski	71adaae258	kernel: add two missing config symbols for 3.1 SVN-Revision: 28080	2011-08-24 11:43:25 +00:00
Gabor Juhos	72e117ec79	ramips: rt305x: add support for the ZyXEL NBG-419N board SVN-Revision: 28078	2011-08-22 20:41:49 +00:00
Gabor Juhos	4b96d3af2a	ramips: rt305x: remove unused defines from mach-nw718.c SVN-Revision: 28077	2011-08-22 20:41:48 +00:00
Gabor Juhos	462ca22e9c	ramips: sort Makefile entries SVN-Revision: 28076	2011-08-22 20:41:47 +00:00
Gabor Juhos	d50494f3bb	ramips: sort RAMIPS_MACH_* defines SVN-Revision: 28075	2011-08-22 20:41:45 +00:00
Gabor Juhos	90686691ce	ramips: fix wireless firmware extraction for wr512-3gn Signed-off-by: Andrew Andrianov <necromant@necromant.ath.cx> SVN-Revision: 28073	2011-08-22 18:08:45 +00:00
Gabor Juhos	f0049824b9	ramips: remove 'default [yn]' keywords from machine Kconfig entries SVN-Revision: 28054	2011-08-19 15:55:12 +00:00
Gabor Juhos	6720025497	ramips: rt305x: fix wr512n image generation SVN-Revision: 28053	2011-08-19 15:55:11 +00:00
Gabor Juhos	9085b05d9e	ramips: rt305x: support for wr512-3gn-like routers Signed-off-by: Andrew Andrianov <necromant@necromant.ath.cx> SVN-Revision: 28052	2011-08-19 15:55:10 +00:00
Gabor Juhos	46b101ad0a	ramips: register usb on Belkin F5D8235 v2 and Argus ATP-52-B routers Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 28051	2011-08-19 15:55:08 +00:00
Gabor Juhos	05209860da	ramips: fix wireless on Belkin F5D8235 v2 Fix wireless firmware extract from flash for Belkin F5D8235 v2. Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 28050	2011-08-19 15:55:07 +00:00
Gabor Juhos	f8ab604eb6	ramips: fix typo in default packages Fix fivebytepypo - there is no such kernel module wpad-mini :) Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 28049	2011-08-19 15:55:05 +00:00
Hamish Guthrie	048d4aca76	omap35xx: Add 3.0.3 kernel support for Gumstix SVN-Revision: 28047	2011-08-19 12:00:08 +00:00
Hauke Mehrtens	464539b074	kernel: update to version 3.0.3 SVN-Revision: 28043	2011-08-18 12:54:12 +00:00
Jo-Philipp Wich	ebb152295b	fix the default network configuration for the ASUS WL-330gE (#8751 ) SVN-Revision: 28024	2011-08-17 03:16:59 +00:00
Hauke Mehrtens	09b1073f9b	kernel: update kernel to version 2.6.39.4 SVN-Revision: 28022	2011-08-16 22:04:10 +00:00
Jonas Gorski	3e94ee9642	kernel: generic: refresh patches for 3.1-rc2 SVN-Revision: 28021	2011-08-16 21:42:15 +00:00
Gabor Juhos	ace8ce0845	ramips: use maccalc instead of hexdump + sed SVN-Revision: 28007	2011-08-15 19:00:23 +00:00
Gabor Juhos	bfc47ffead	ramips: rt305x: fix mac addresses on the Netcore NW718 board SVN-Revision: 28006	2011-08-15 18:55:53 +00:00
Gabor Juhos	17c041cd0b	ramips: add maccalc to the default package list SVN-Revision: 28005	2011-08-15 18:55:52 +00:00
Gabor Juhos	67e480971c	ramips: add input drivers to the default package list SVN-Revision: 28003	2011-08-15 18:55:50 +00:00
Gabor Juhos	35ecf12059	ramips: rt305x: make config and factory partitions read-only on the ATP-52B SVN-Revision: 28002	2011-08-15 18:55:48 +00:00
Gabor Juhos	75e2360ab3	ramips: add uci-defaults scripts to preconfigure USB LEDs SVN-Revision: 28000	2011-08-15 14:12:00 +00:00
Gabor Juhos	e1b176de82	ramips: rt305x: add some USB modules to the default profile SVN-Revision: 27999	2011-08-15 14:11:58 +00:00
Gabor Juhos	169d68c98c	ramips: rt305x: add dwc_otg driver Based on a patch by Layne Edwards <ledwards@astrumtech.net> SVN-Revision: 27997	2011-08-15 14:11:55 +00:00
Gabor Juhos	0ca16a4600	ramips: rt305x: register the dwc_otg device on the relevant boards SVN-Revision: 27996	2011-08-15 14:11:52 +00:00
Gabor Juhos	addc86fdbd	ramips: rt305x: add dwc_otg platform device Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su> SVN-Revision: 27995	2011-08-15 14:11:51 +00:00
Gabor Juhos	6ef87ff5e6	ramips: sync kernel config SVN-Revision: 27993	2011-08-15 14:11:48 +00:00
Gabor Juhos	4ee4fc9725	ramips: load the input drivers during preinit SVN-Revision: 27992	2011-08-15 14:11:47 +00:00
Gabor Juhos	a3c7e71ae1	ramips: add support for Argus ATP-52B [The ESW related changes has been removed - juhosg] Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 27991	2011-08-15 14:11:45 +00:00
Gabor Juhos	1ebcf03789	ramips: allow to specify port layout for the switch of the RT305x/RT3350 Based on a patch by Roman Yeryomin <roman@advem.lv> SVN-Revision: 27990	2011-08-15 14:11:43 +00:00
Gabor Juhos	bb64fb2e58	generic: ar8216: add support for get link status SVN-Revision: 27989	2011-08-15 14:11:41 +00:00
Felix Fietkau	50817f6afe	kernel: disable cfi cmdset 0002 erase suspend on some platforms, erase suspend leads to data corruption and lockups when write ops collide with erase ops. this has been observed on the buffalo wzr-hp-g300nh. rather than play whack-a-mole with a hard to reproduce issue on a variety of devices, simply disable erase suspend, as it will usually not produce any useful gain on the small filesystems used on embedded hardware. SVN-Revision: 27984	2011-08-15 00:15:36 +00:00
Felix Fietkau	12c84f8eeb	ar71xx: add some code to detect DMA stuck conditions on ar7240 SVN-Revision: 27975	2011-08-13 22:30:14 +00:00
Felix Fietkau	85ccc74e1b	ar71xx: on ar724x only reset the link status in the restart handler, the fast reset takes care of DMA stuck issues SVN-Revision: 27973	2011-08-13 21:49:46 +00:00
Hauke Mehrtens	77218b0338	brcm47xx: fix flash detection on chipcommon less devices. This closes #9906 Thank you for the report Kim SVN-Revision: 27967	2011-08-12 16:37:22 +00:00
Felix Fietkau	82a05d1a19	initramfs: allow preinit to enable switching from initramfs to tmpfs to allow overlayfs to be mounted on top of it SVN-Revision: 27960	2011-08-11 20:32:57 +00:00
Felix Fietkau	d26bb6c59c	ar71xx: adjust the mtd layout of tew-632brp and dir-615c to match the image layout (fixes #9922 ) SVN-Revision: 27959	2011-08-11 13:52:40 +00:00
Florian Fainelli	ce2ced7311	package more board specific modules: - keyboard matrix driver - SoC sound support based on patch by KanjiMonster SVN-Revision: 27957	2011-08-11 11:18:44 +00:00
Florian Fainelli	f7dbf2ef04	add more missing touchscren symbols (3.0+) SVN-Revision: 27956	2011-08-11 11:18:41 +00:00
Florian Fainelli	11b1f687d4	disable hardware perf support to work in qemu SVN-Revision: 27955	2011-08-11 11:18:37 +00:00
Hauke Mehrtens	20de21593b	kernel: revert r27953 KanjiMonster did the right patch, I was just confused because of linux-3.0 and linux-2.6.30 SVN-Revision: 27954	2011-08-11 09:54:02 +00:00
Hauke Mehrtens	409f8211e1	kernel: fix ocf patch for kernel 2.6.30 find_task_by_vpid is already exported by the kernel without any patches needed. SVN-Revision: 27953	2011-08-11 09:47:36 +00:00
Jonas Gorski	7304dcad2a	kernel: 2.6.30: remove bogus additional find_task_by_vpid export from OCF find_task_by_vpid is already exported, thus breaking builds. SVN-Revision: 27952	2011-08-11 09:46:30 +00:00
Jonas Gorski	def60e2918	ar71xx: make ehci patch apply again SVN-Revision: 27951	2011-08-10 23:02:56 +00:00
Felix Fietkau	9e5ead9a51	ar71xx: fix a copy&paste bug that broke wzr-hp-g300nh and wzr-hp-ag300h images (#9918 ) SVN-Revision: 27950	2011-08-10 22:24:56 +00:00
Florian Fainelli	b59ab7d13b	fix ehci build on 3.0+ SVN-Revision: 27946	2011-08-10 11:37:25 +00:00
Florian Fainelli	0e40c19b45	add ignore_oc in struct ehci_hcd SVN-Revision: 27945	2011-08-10 11:37:21 +00:00
Florian Fainelli	458716389c	update to 3.0.1 SVN-Revision: 27943	2011-08-09 13:13:22 +00:00
Florian Fainelli	f124358722	add CONFIG_EARLY_PRINTK SVN-Revision: 27942	2011-08-09 13:13:16 +00:00
Jonas Gorski	6b5f483efa	bcm63xx: add support for linux 3.1-rc1 SVN-Revision: 27941	2011-08-09 12:19:49 +00:00
Jonas Gorski	cf2070bd5b	linux: generic: add support for 3.1-rc1 SVN-Revision: 27940	2011-08-09 12:19:43 +00:00
Daniel Dickinson	7ef004a144	Add packages that will be relant as "There's a new Alix platform driver hitting linux-next upstream. Get ready for it in 2.6.39.4 and 3.0. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>" SVN-Revision: 27929	2011-08-08 02:33:18 +00:00
Felix Fietkau	ba9e7889dd	kernel: fix another typo in the netfilter optimization patches SVN-Revision: 27927	2011-08-07 21:17:18 +00:00
Hauke Mehrtens	6f4151b7f0	kernel: add missing option SVN-Revision: 27925	2011-08-06 16:46:04 +00:00
Felix Fietkau	ac96ae6731	kernel: add missing checks in the netfilter optimization patch which broke some rules containing only source/destination address checks SVN-Revision: 27923	2011-08-06 12:39:31 +00:00
Hauke Mehrtens	a1d5ad7655	uml: add some missing options SVN-Revision: 27921	2011-08-06 11:23:45 +00:00
Hauke Mehrtens	d447cb5164	kernel: add some missing config options These options where found by buildbot SVN-Revision: 27920	2011-08-06 10:41:15 +00:00
Hauke Mehrtens	51be984655	kernel: update to kernel version 3.0.1 SVN-Revision: 27918	2011-08-06 09:51:55 +00:00
Florian Fainelli	55e020cd14	update to kernel 3.0 SVN-Revision: 27912	2011-08-05 13:48:42 +00:00
Florian Fainelli	698c1b4952	add more missing config symbols SVN-Revision: 27911	2011-08-05 13:48:38 +00:00
Florian Fainelli	48af2495b4	update to kernel 3.0 SVN-Revision: 27910	2011-08-05 13:48:35 +00:00
Florian Fainelli	a8e79cbdf8	add 101-perf_arm_uclibc.patch to 3.0 patches SVN-Revision: 27909	2011-08-05 13:48:31 +00:00
Florian Fainelli	c99d08f050	add missing config symbol SVN-Revision: 27908	2011-08-05 13:48:28 +00:00
Gabor Juhos	7e5a1bc1d0	ar71xx: fix image generation SVN-Revision: 27907	2011-08-05 10:31:52 +00:00
Hauke Mehrtens	77966b81d8	brcm47xx: use kernel 3.0 As this target changes often these days it is hard to support more kernel versions. Now only kernel 3.0 is supported. SVN-Revision: 27906	2011-08-04 20:10:24 +00:00
Hauke Mehrtens	8428ebd8e8	brcm47xx: update patches * this adds sflash support for ssb devices * the flash is now a platform device * minor updates SVN-Revision: 27902	2011-08-04 20:04:54 +00:00
Gabor Juhos	85b858fae6	ar71xx: enable sysupgrade on the AP96 and DB120 boards SVN-Revision: 27901	2011-08-04 19:41:18 +00:00
Gabor Juhos	fb77134596	ar71xx: use the same test for AP121 and Zcomax sysupgrade images SVN-Revision: 27900	2011-08-04 19:41:17 +00:00
Gabor Juhos	fd3a5f64f2	ar71xx: cleanup image generation Makefile SVN-Revision: 27899	2011-08-04 19:41:16 +00:00
Felix Fietkau	4b75394056	ar71xx: fix ethernet FIFO state corruption on ar7240 When starting/stopping DMA sometimes the FIFO state gets corrupted, leading to wildly fluctuating latencies or packet data corruption. Fix this by issuing a fast MAC reset as soon as the link is detected as up. Fixes #9689, #9405 SVN-Revision: 27896	2011-08-04 17:36:31 +00:00
Felix Fietkau	d2aeca6b6d	ag71xx: fix memory corruption issues on ar7240 on ethernet start/stop When the DMA engine state gets corrupted due to a hardware issues, it often won't stop rx until a full reset is issued. In that case the hardware must keep a valid descriptor, otherwise it will write to random places in system RAM, triggering random crashes. To fix this, keep a dummy descriptor without a buffer that keeps the DMA engine in a sane state until the reset is done SVN-Revision: 27895	2011-08-04 17:36:27 +00:00
Felix Fietkau	500c3a1475	ar71xx: fix MAC/MDIO reset mask handling SVN-Revision: 27894	2011-08-04 17:36:23 +00:00
Jonas Gorski	3b36e83a29	generic: Add missing config symbol SVN-Revision: 27887	2011-08-03 23:28:00 +00:00
Florian Fainelli	4543f6d659	remove 8*1-usb_serial_endpoint_size.patch This is breaking some devices out there such as Winchiphead CH341 adapters (#9601) SVN-Revision: 27885	2011-08-03 13:23:21 +00:00
Florian Fainelli	c37a9544bf	add support for BCM6345 Ethernet DMA engine SVN-Revision: 27881	2011-08-02 18:55:55 +00:00
Florian Fainelli	11c4128770	improve BCM6345 support - runtime detect the amount of memory available - define EBI_BASE as MPI_BASE to get rid of chip-select specific hacks - fix GPIO control SVN-Revision: 27880	2011-08-02 18:55:46 +00:00
Florian Fainelli	c4af036ec7	refresh 3.0 patches SVN-Revision: 27879	2011-08-02 18:55:38 +00:00
Felix Fietkau	54d97e6782	ar71xx: add some hacks to work around the misalignment in IP packets received on AR71xx and AR91xx ethernet MACs decreases CPU load with the default firewall for routing 95 mbit/s from 78% to 55% SVN-Revision: 27878	2011-08-02 15:12:08 +00:00
Florian Fainelli	a0ce3668a6	fix r6040 multicast patch, thanks nicolas le falher SVN-Revision: 27876	2011-08-02 14:13:00 +00:00
Jonas Gorski	ed2b7cd342	linux/generic: remove obsolete kernel options from 3.0 Also fix one typo. SVN-Revision: 27875	2011-08-02 09:58:16 +00:00
Jonas Gorski	61e2e03311	kernel: Fix firewire for 2.6.37+ The old ieee1394 stack was removed in 2.6.37. The new firewire stack is available for all kernel versions, but experimental for the older one, so make both available where appropriate. SVN-Revision: 27874	2011-08-02 09:53:19 +00:00
Felix Fietkau	e5e17a1ce8	imagebuilder: clean opkg files if requested (patch from #9866 ) SVN-Revision: 27872	2011-08-01 23:58:11 +00:00
Felix Fietkau	62b8cba9c0	kernel: enable inotify by default (#8055 ) SVN-Revision: 27853	2011-07-31 18:12:23 +00:00
Felix Fietkau	19eaf1c5f7	kernel: add a new version of my netfilter speedup patches for linux 2.6.39 and 3.0 SVN-Revision: 27840	2011-07-30 15:39:52 +00:00
Imre Kaloz	e4b6839fd3	upgrade to 3.0 (magicbox ata and openrb usb is broken, but the current kernel didn't compile at all, so...) SVN-Revision: 27826	2011-07-29 10:16:48 +00:00
Jonas Gorski	e18ceb1dac	ar71xx: merge WZR-HP-G301NH support into WZR-HP-G300NH Now that we can use a generic name for the switch there is no need for a separate image for the WZR-HP-G301NH. Update the default network config and remove the extra image. SVN-Revision: 27814	2011-07-28 11:57:51 +00:00
Gabor Juhos	ea211c4d90	ramips: rt305x: add support for the Netcore NW718 board SVN-Revision: 27813	2011-07-28 10:56:32 +00:00
Gabor Juhos	437e184484	ramips: rt305x: add support for the Asus RT-G32 B1 board Based on a patch by: Sergiy <piratfm@gmail.com> SVN-Revision: 27812	2011-07-28 10:56:30 +00:00
Gabor Juhos	7193f29d96	ramips: rt305x: enable M25P80 driver Based on a patch by Sergiy <piratfm@gmail.com> SVN-Revision: 27811	2011-07-28 10:56:28 +00:00
Gabor Juhos	c6db514de8	ramips: rt305x: introduce rt305x_register_spi helper Based on a patch by Sergiy <piratfm@gmail.com> SVN-Revision: 27810	2011-07-28 10:56:27 +00:00
Gabor Juhos	57122e7ccc	ramips: add SPI controller driver Based on a patch by Sergiy <piratfm@gmail.com> SVN-Revision: 27809	2011-07-28 10:56:25 +00:00
Gabor Juhos	3f986df05f	ramips: rt305x: add support for the DIR-600 B1,B2 boards SVN-Revision: 27808	2011-07-28 10:56:24 +00:00
Gabor Juhos	857c1028ac	ramips: rt305x: change machine id for DIR-300 SVN-Revision: 27807	2011-07-28 10:56:22 +00:00
Gabor Juhos	42d3a55347	ramips: rt305x: rename LEDs on the DIR-300-B1 SVN-Revision: 27806	2011-07-28 10:56:21 +00:00
Gabor Juhos	39689b648f	ramips: rt305x: sort Kconfig/Makefile entries SVN-Revision: 27805	2011-07-28 10:56:19 +00:00
Gabor Juhos	32c0534516	ramips: rt305x: fix uci-defaults/network script for the RT3350 based boards This change corrects expected CPU name of Ralink RT3050, which describes itself as RT3350 (this name is ripped off chip and elevated to user space via /proc/cpuinfo.) This patch fixes wired network on DIR-300 rev B and DIR-600 rev B Signed-off-by: Slawomir Cygan <wiewior@wiewior.eu.org> SVN-Revision: 27804	2011-07-28 10:56:18 +00:00
Gabor Juhos	57663ce25b	ramips: fix PWH2004 image generation SVN-Revision: 27803	2011-07-28 10:56:15 +00:00
Jonas Gorski	eaa935658b	swconfig: Add generic switch identifiers Also make switches available under a generic name "switch<num>" for device name agnostic access. The old device name is used as an alias for backward compatibility. SVN-Revision: 27800	2011-07-27 18:00:18 +00:00
Felix Fietkau	4da138d899	x86/alix2: include WAN interface by default Include WAN interface by default, instead of putting both ports in the LAN bridge. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> SVN-Revision: 27787	2011-07-26 16:37:48 +00:00
Felix Fietkau	41db64f8e0	x86/alix2: fix typo in target makefile Cut and paste cruft from borrowing from Geos platform. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> SVN-Revision: 27786	2011-07-26 16:37:44 +00:00
Hauke Mehrtens	80956276a7	x86: add missing config symbols This adds some config symbols for kernel 3.0. Thank you realopty for the patch. This is from #9719. SVN-Revision: 27775	2011-07-25 21:21:01 +00:00
Jonas Gorski	4e6c93bef1	bcm63xx: Fix SPI commands and register offsets for BCM6348 In 240-spi.patch, spi registers for bcm6348 were all messed up. This patch fixes that. It also fixes some spi commands for all bcm63xx. Signed-off-by: Anthony Blakemore <stokie-ant@raverbaby.co.uk> SVN-Revision: 27774	2011-07-25 19:52:47 +00:00
Imre Kaloz	f0f10fa599	add missing symbols for generic and x86 on 3.0, based on Philip Prindeville's patch SVN-Revision: 27762	2011-07-24 22:04:08 +00:00
Jo-Philipp Wich	f66871e836	From: George Kashperko <george@znau.edu.ua> Issue map read after Write Buffer Load command to ensure chip is ready to receive data. Signed-off-by: George Kashperko <george@znau.edu.ua> SVN-Revision: 27760	2011-07-24 15:37:00 +00:00
Jo-Philipp Wich	6eb9e39bc4	refresh 501-yaffs_cvs_2009_04_24.patch for Linux 3.0 final SVN-Revision: 27759	2011-07-24 15:36:33 +00:00
Hauke Mehrtens	4815eaa4c3	brcm47xx: run ssb_pcicore_fix_sprom_core_index just for ssb bus on pci ssb_pcicore_fix_sprom_core_index accesses the sprom on the pci bus but this causes a data bus error (oops) on a SoC. SVN-Revision: 27758	2011-07-24 15:18:29 +00:00
Felix Fietkau	9e4113b493	ar71xx: autodetect rtl8366s/rtl8366rb on wzr-hp-g300nh SVN-Revision: 27756	2011-07-24 14:40:35 +00:00
Felix Fietkau	5b32d62fcf	rtl8366_smi: implement a function for detecting whether the attached switch is RTL8366S or RTL8366RB SVN-Revision: 27755	2011-07-24 14:40:31 +00:00
Felix Fietkau	1afe8a0726	rtl8366: unify rtl8366s and rtl8366rb platform data SVN-Revision: 27754	2011-07-24 14:40:23 +00:00
Hauke Mehrtens	00dd85d8f6	ocf-linux: version bump to 20110720 Fixes problem with TFM allocation in cryptosoft.c Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> Hauke: * remove ubsec_ssb package and take it from ocf-linux * use patches from ocf-linux package * refresh all patches * readd some build fixes for OpenWrt. * readd CRYPTO_MANAGER dependency SVN-Revision: 27753	2011-07-24 14:17:58 +00:00
Felix Fietkau	b5e3f6cd81	x86: 2.6.39 requires additional symbol Sysfs support for DMI BIOS was added in 2.6.39. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> SVN-Revision: 27749	2011-07-24 09:41:07 +00:00
Felix Fietkau	a6f7e72cf7	atheros: fix mii phy read/write ioctl Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> SVN-Revision: 27747	2011-07-24 09:11:10 +00:00
Felix Fietkau	6d3bddb056	geos: include pppstats and pppdump in default packaging As the Geos box includes an ADSL modem that's targeted towards PPPoE, PPPoA, and bridged utilization, including these useful tools allows for easier configuration and troubleshooting. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> SVN-Revision: 27743	2011-07-24 08:41:58 +00:00
Felix Fietkau	9105dad418	ar71xx: enable the usb power regulator on the wzr-hp-ag300h through gpio 2 (#9684 ) SVN-Revision: 27739	2011-07-24 08:02:20 +00:00
Imre Kaloz	193845ce7a	upgrade to 3.0 SVN-Revision: 27738	2011-07-23 20:44:08 +00:00
Imre Kaloz	5e29e14795	upgrade to 3.0 SVN-Revision: 27737	2011-07-23 20:43:53 +00:00
Imre Kaloz	0cb1b5d775	3.0 is out SVN-Revision: 27736	2011-07-23 20:42:58 +00:00
Hauke Mehrtens	49f4d4217e	brcm47xx: build bcma into the kernel Now we can assume that every brcm47xx kernel has the bcma module build into the kernel. This is not needed for this version as this does not support bcma as system bus but kernel 3.0 will. SVN-Revision: 27733	2011-07-23 11:19:58 +00:00
Hauke Mehrtens	5169b72c8a	kernel: update bcma and ssb to version master-2011-07-22 from wireless-testing SVN-Revision: 27731	2011-07-23 11:17:00 +00:00
Hauke Mehrtens	b07b5fc7b6	brcm47xx: remove old kernel versions SVN-Revision: 27724	2011-07-22 18:41:24 +00:00
Hauke Mehrtens	b988168906	brcm47xx: update bcma and ssb to master-2011-07-21 * add new patches for bcm4716 SoC * add support for serial flash on bcma bus SVN-Revision: 27723	2011-07-22 16:30:42 +00:00
Hauke Mehrtens	39f491e479	kernel: update to linux-3.0 and refresh patches. Thank you Peter Wagner for the patch SVN-Revision: 27722	2011-07-22 16:04:25 +00:00
Felix Fietkau	c7173a211d	ar71xx: reinitialize global switch settings after reset on ar7240 SVN-Revision: 27705	2011-07-20 14:39:47 +00:00
Felix Fietkau	ca473833c4	ar71xx: configure address aging on ar7240 SVN-Revision: 27704	2011-07-20 14:39:42 +00:00
Felix Fietkau	fefc79f3cb	ar71xx: reset the phy in the ethernet init on ar724x SVN-Revision: 27703	2011-07-20 12:04:34 +00:00
Felix Fietkau	005fe5d1fd	ar71xx: make sure that rx and interrupts are disabled before issuing the hardware reset SVN-Revision: 27702	2011-07-20 12:04:29 +00:00
Felix Fietkau	e7ab000008	ar71xx: increase the delay after the ethernet MAC reset SVN-Revision: 27701	2011-07-20 12:04:25 +00:00
Felix Fietkau	255dcaa3a6	ar71xx: fix an unused variable warning SVN-Revision: 27700	2011-07-20 12:04:20 +00:00
John Crispin	8acc276692	sync default kernel config for lantiq danube/ar9 SVN-Revision: 27697	2011-07-19 18:08:09 +00:00
John Crispin	500d7d4bc8	fix etehrnet when using EPHY on lantiq ASE SVN-Revision: 27696	2011-07-19 18:06:52 +00:00
John Crispin	78a9b1a2ad	fixes pci on lantiq AR9 SoC SVN-Revision: 27695	2011-07-19 18:06:42 +00:00
John Crispin	3833b7be24	add support for more lantiq AR9 boards SVN-Revision: 27694	2011-07-19 18:06:33 +00:00
Felix Fietkau	fee32761f3	kernel: backport and enable tmpfs xattr support for 2.6.39 SVN-Revision: 27691	2011-07-19 09:00:55 +00:00
John Crispin	6b8c119b41	* fix external interrupts SVN-Revision: 27687	2011-07-18 16:27:11 +00:00
John Crispin	5906377332	* add gigasx76x update * rebase patches * add arv752DPW arv7525PD * fixes gpio_keys Signed-off-by: Luka Perkov <openwrt@lukaperkov.net> Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 27665	2011-07-17 19:27:44 +00:00
Florian Fainelli	3994a2d1f9	add additionnal debug symbols when kernel debugging is enabled SVN-Revision: 27637	2011-07-17 12:30:04 +00:00
Florian Fainelli	9c7294f7c7	add ehci support to DWV-S0 board (#9059 ) SVN-Revision: 27622	2011-07-16 08:39:04 +00:00
Florian Fainelli	930485561c	fix GEN_SPI_RSET_BASE macro (#9697 ) SVN-Revision: 27604	2011-07-13 09:33:11 +00:00
Imre Kaloz	ab5fd3c1cb	upgrade to 3.0-rc7 SVN-Revision: 27600	2011-07-12 13:44:16 +00:00
Imre Kaloz	0321740a62	upgrade to 3.0-rc6 and optimize for armv5te again SVN-Revision: 27592	2011-07-11 20:35:16 +00:00
Felix Fietkau	f3d693c0ee	ar71xx: do not reset the hardware on transmit timeout - this would mess up the up the PHY state SVN-Revision: 27568	2011-07-09 06:30:13 +00:00
Felix Fietkau	2806c75c07	ag71xx: keep the rx engine stopped while the link is not up, should hopefully fix stability issues from #9405 SVN-Revision: 27567	2011-07-09 06:29:46 +00:00
Imre Kaloz	8788b97e65	use the new upstream l2cache and wdt code, smaller changes, refresh patches SVN-Revision: 27558	2011-07-08 09:41:07 +00:00
Imre Kaloz	b3b0f0e49a	add mpcore_wdt fixes SVN-Revision: 27557	2011-07-08 09:33:13 +00:00
John Crispin	7f548d379f	fix generation of falcon images for profiles SVN-Revision: 27550	2011-07-07 20:20:51 +00:00
John Crispin	d7732885ed	adds 2 ASC related patches to lantiq Signed-off-by: Thomas Langer <thomas.langer@lantiq.com> SVN-Revision: 27549	2011-07-07 20:20:46 +00:00
John Crispin	b75a8fb532	fix up falcon kernel config SVN-Revision: 27542	2011-07-07 18:20:56 +00:00
John Crispin	036df9f088	fix i2c-falcon kmod package selection SVN-Revision: 27541	2011-07-07 18:20:51 +00:00
John Crispin	a463daa818	replace all references to xway with danube SVN-Revision: 27538	2011-07-07 18:20:37 +00:00
John Crispin	dc2af33083	fix lantiq image makefile to represent new split between ar9 and danube SVN-Revision: 27537	2011-07-07 18:20:31 +00:00
John Crispin	3c1079a7a7	add ar9 specific profile SVN-Revision: 27536	2011-07-07 18:20:27 +00:00
John Crispin	09d547eae4	rename xway profile to danube and remove ar9 specifics SVN-Revision: 27535	2011-07-07 18:20:21 +00:00
John Crispin	f177052c9d	remove ar9 board from xway profiles SVN-Revision: 27534	2011-07-07 18:20:16 +00:00
John Crispin	dc69e5f2e3	remove CONFIG_MTD_PARTITIONS references from lantiq 3.0 patches SVN-Revision: 27532	2011-07-07 18:20:07 +00:00
Imre Kaloz	79fa6c693a	refresh patches SVN-Revision: 27528	2011-07-07 17:18:50 +00:00
Imre Kaloz	b8227050fb	refresh patches SVN-Revision: 27527	2011-07-07 17:18:06 +00:00
Imre Kaloz	92981b6bb3	enable smp support SVN-Revision: 27526	2011-07-07 17:17:44 +00:00
Imre Kaloz	94055a90a7	make smp code more similar to upstream SVN-Revision: 27525	2011-07-07 17:17:06 +00:00
Imre Kaloz	42df203852	3.0 is at rc6 now SVN-Revision: 27524	2011-07-07 13:30:41 +00:00
Gabor Juhos	5ad4040c49	ar71xx: build image for the AP121 boards with 4M of flash SVN-Revision: 27523	2011-07-07 13:01:50 +00:00
Gabor Juhos	cdcb10ee42	ar71xx: add separate profiles for the AP121 and AP121-MINI boards SVN-Revision: 27522	2011-07-07 13:01:48 +00:00
Imre Kaloz	b15f8f765a	add support for and switch to XZ compressed kernels on ARM SVN-Revision: 27518	2011-07-07 10:26:16 +00:00
Imre Kaloz	d148dcce05	select the right cpu SVN-Revision: 27517	2011-07-07 10:24:37 +00:00
Florian Fainelli	a3e343b722	fix building of perf for arm on uclibc SVN-Revision: 27514	2011-07-07 09:43:00 +00:00
Florian Fainelli	a4d69536ea	enable support for perf events SVN-Revision: 27512	2011-07-07 09:42:53 +00:00
Florian Fainelli	0cb42cf9a4	enable perf counter support SVN-Revision: 27511	2011-07-07 09:42:50 +00:00
Daniel Dickinson	0d8b0e937d	base-files: diag.sh: added failsafe led definition SVN-Revision: 27502	2011-07-07 03:09:20 +00:00
John Crispin	a674aabe54	get ready for 3.0 SVN-Revision: 27496	2011-07-06 17:27:17 +00:00
Gabor Juhos	abb1ca01a7	ramips: fix buffalo image generation SVN-Revision: 27495	2011-07-06 16:46:33 +00:00
Imre Kaloz	a832965eff	add 3.0 support SVN-Revision: 27493	2011-07-06 13:03:38 +00:00
Imre Kaloz	a00596924b	refresh patches SVN-Revision: 27492	2011-07-06 12:57:51 +00:00
Imre Kaloz	90bd74dd8b	fixup mtd refresh and co. SVN-Revision: 27491	2011-07-06 12:55:21 +00:00
Imre Kaloz	f24764a372	fix myloader patch, thanks KanjiMonster SVN-Revision: 27490	2011-07-06 12:48:17 +00:00
John Crispin	d42f0c9a1b	fixes mtd maps for lantiq easy50712 and easy50601 evalkit. without this patch mini_fo/jffs caused the uboot to be overwritten on firstboot SVN-Revision: 27489	2011-07-06 10:36:56 +00:00
Imre Kaloz	c93b5653bc	we have an up-to-date mach-type file now SVN-Revision: 27486	2011-07-06 10:12:50 +00:00
Imre Kaloz	05790d9cba	replace the cut down machtype with the full one, as we support a lot of not-yet-upstreamed stuff SVN-Revision: 27485	2011-07-06 10:09:15 +00:00
Florian Fainelli	00ad56b73e	move board_HW553 inside the ifdef ..BCM6358 .. endif block SVN-Revision: 27484	2011-07-06 10:00:39 +00:00
Florian Fainelli	965567a320	refresh 2.6.39 geode patches SVN-Revision: 27483	2011-07-06 10:00:05 +00:00
Gabor Juhos	1a4e7153b6	ramips: add diag support for RT-N15 and PWH2004 Also sort the board names alphabetically. SVN-Revision: 27478	2011-07-06 08:05:00 +00:00
Gabor Juhos	d6985f5b46	ramips: use the 'router' LED for diagnostic on the WHR-G300N board SVN-Revision: 27477	2011-07-06 08:04:55 +00:00
Gabor Juhos	2cc346b8e0	ramips: create tftp image for the WHR-G300N board SVN-Revision: 27476	2011-07-06 08:04:54 +00:00
Gabor Juhos	0dc18d8586	ramips: create factory image for the WHR-G300N board SVN-Revision: 27474	2011-07-06 08:04:52 +00:00
Daniel Dickinson	1141165bb9	Makefile: fixed inclusion of kmod-leds-gpio as a module (breaks Image Generator) - the module is built into the kernel. SVN-Revision: 27471	2011-07-06 06:35:24 +00:00
Daniel Dickinson	9dc72505a2	profiles: GW6X00: fixed inclusion of both wl and wlc wireless tools...should be just wlc SVN-Revision: 27470	2011-07-06 06:35:22 +00:00
Imre Kaloz	612a1fcbc4	add some symbols SVN-Revision: 27464	2011-07-05 21:19:57 +00:00
Florian Fainelli	d24fc7ef56	sched_connmark depends on NF_CONNTRACK_MARK (#8976 , #9423 ) SVN-Revision: 27457	2011-07-05 12:40:50 +00:00
Imre Kaloz	c52560302d	add missing symbols SVN-Revision: 27454	2011-07-05 11:55:31 +00:00
Florian Fainelli	7c3bbe150a	hw553: fix missing has_uart0 in board definition (#9533 ) SVN-Revision: 27448	2011-07-04 15:04:58 +00:00
Gabor Juhos	89f6b29feb	ar71xx: fix building of squashfs images SVN-Revision: 27446	2011-07-04 12:10:03 +00:00
John Crispin	29653782a9	set DEFAULT_SUBTARGET for lantiq/ SVN-Revision: 27445	2011-07-04 11:21:47 +00:00
John Crispin	04fefa4a28	fix broken falcon patches from last night SVN-Revision: 27441	2011-07-04 07:50:34 +00:00
Gabor Juhos	e9c8218375	ramips: create factory image for DIR-300-B1 SVN-Revision: 27439	2011-07-04 06:48:45 +00:00
Felix Fietkau	7afed2d86c	ar71xx: add wzr-hp-ag300h sysupgrade support (patch from #9650 ) SVN-Revision: 27434	2011-07-04 03:03:34 +00:00
John Crispin	cd8166f3fd	AT91: flexibity: add system uci file SVN-Revision: 27413	2011-07-03 18:55:57 +00:00
John Crispin	349e97f879	AT91: Add flexibity board support The patch below adds AT91 Flexibity Connect board support. Signed-off-by: Maxim Osipov <maxim.osipov@gmail.com> SVN-Revision: 27412	2011-07-03 18:51:59 +00:00
John Crispin	2975f0aaf1	alix2: add/subtract features as needed Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> SVN-Revision: 27411	2011-07-03 17:39:24 +00:00
John Crispin	0a8430bfab	use netif_receive_skb on lantiq Signed-off-by: Luca Olivetti <luca@ventoso.org> SVN-Revision: 27410	2011-07-03 17:39:05 +00:00
John Crispin	058eca0b3b	automatic subtarget enumaration SVN-Revision: 27407	2011-07-03 17:38:23 +00:00
John Crispin	43771202d3	update lantiq/falcon patches SVN-Revision: 27406	2011-07-03 17:38:11 +00:00
John Crispin	d43cbe24a5	fix description for lantiq target SVN-Revision: 27405	2011-07-03 17:37:57 +00:00
Gabor Juhos	6e7b802297	ramips: merge 2.6.39 patches SVN-Revision: 27399	2011-07-03 15:02:10 +00:00
Gabor Juhos	646f64d389	ramips: remove 2.6.37 stuff SVN-Revision: 27398	2011-07-03 15:02:09 +00:00
Gabor Juhos	2fc6be00f4	ramips: switch to 2.6.39.2 SVN-Revision: 27397	2011-07-03 15:02:07 +00:00
Gabor Juhos	0fde070cf9	ramips: add 2.6.39 support Based on the patches from #9625 SVN-Revision: 27396	2011-07-03 15:02:06 +00:00
Gabor Juhos	c8010517d5	ramips: add hotplug script to extract eeprom for the rt2x00 driver SVN-Revision: 27393	2011-07-03 15:02:01 +00:00
Gabor Juhos	3334d0604e	ramips: specify eeprom file name on RT305X SVN-Revision: 27392	2011-07-03 15:02:00 +00:00
Gabor Juhos	f53cc4c439	ramips: specify eeprom file name on RT288X SVN-Revision: 27391	2011-07-03 15:01:59 +00:00
Gabor Juhos	129217e127	generic: add rt2x00_platform.h SVN-Revision: 27390	2011-07-03 15:01:57 +00:00
Gabor Juhos	521e495f4b	ramips: add all supported boards to lib/ramips.sh SVN-Revision: 27389	2011-07-03 15:01:56 +00:00
Gabor Juhos	6f54df889a	ramips: check the size of the uImage in image generation SVN-Revision: 27388	2011-07-03 15:01:55 +00:00
Gabor Juhos	575a5286c8	ramips: use lowercase partiion names on the WCR150GN board SVN-Revision: 27387	2011-07-03 15:01:53 +00:00
Gabor Juhos	31facf0b75	ramips: use different partition names in the DIR-300-B1 image SVN-Revision: 27386	2011-07-03 15:01:52 +00:00
Gabor Juhos	dbe55f08f0	ramips: force word write on flashes with AMD cmdset (#9252 ) SVN-Revision: 27385	2011-07-03 15:01:51 +00:00
Gabor Juhos	f1cf43d468	ramips: update partition map for DIR-300-B1 Patch by Layne Edwards from #9252. SVN-Revision: 27384	2011-07-03 15:01:49 +00:00
Gabor Juhos	641c87b127	ramips: consistently use 'firmware' name for sysupgrade partitions SVN-Revision: 27383	2011-07-03 15:01:48 +00:00
Gabor Juhos	381d7f05af	ramips: fix a section mismatch warning SVN-Revision: 27382	2011-07-03 15:01:46 +00:00
Gabor Juhos	16ad91d69f	ramips: remove unused include from the common GPIO code SVN-Revision: 27381	2011-07-03 15:01:44 +00:00
Gabor Juhos	c9f3e7082f	ramips: disable watchdog on sysupgrade SVN-Revision: 27380	2011-07-03 15:01:43 +00:00
Gabor Juhos	e70e6f6848	ramips: swap target check in image generation SVN-Revision: 27379	2011-07-03 15:01:42 +00:00
Gabor Juhos	affb57ee27	ramips: update HW550-3G mtd partitions This patch updates the mtd partitions for the Aztech HW550-3G Signed-off-by: Layne Edwards <ledwards@astrumtech.net> SVN-Revision: 27378	2011-07-03 15:01:41 +00:00
Gabor Juhos	3099ffe414	ramips: set cp0_perfcount_irq for RT305X SVN-Revision: 27377	2011-07-03 15:01:40 +00:00
Daniel Dickinson	f9f3ddebe8	target/patches: This has been sent upstream, but might not appear for a couple of weeks. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> SVN-Revision: 27373	2011-07-03 03:20:04 +00:00
Daniel Dickinson	b0cc0067f9	target/patches: Like the earlier mfgpt patch, the new GPIO drivers also require the MFD driver to be present for the BAR's to be mapped. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> SVN-Revision: 27371	2011-07-03 03:14:53 +00:00
Daniel Dickinson	f2d749ee15	Revert "Like the earlier mfgpt patch, the new GPIO drivers also require the MFD driver to be present for the BAR's to be mapped." This reverts commit c485487b63d1c1de72a375f1278d8a98546ba3af. SVN-Revision: 27370	2011-07-03 03:14:51 +00:00
Daniel Dickinson	209a776f22	Like the earlier mfgpt patch, the new GPIO drivers also require the MFD driver to be present for the BAR's to be mapped. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> SVN-Revision: 27369	2011-07-03 03:14:48 +00:00
Daniel Dickinson	88dcf8629d	The Geode CS5535 and CS5536 companion chips are backward compatible with the SCx200 I2C drivers. Include this on Geos. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> SVN-Revision: 27368	2011-07-03 02:59:00 +00:00
Gabor Juhos	b3a89652a5	ar71xx: use 4k image only for the AP121 board Create optimized 64K images with the new padjffs2 tool and use that images instead of the 4k ones. The 4k images causes problems on devices where the flash erase size is 64 KB. SVN-Revision: 27357	2011-07-02 08:37:59 +00:00
Imre Kaloz	ea8440f4c3	cns21xx belongs to the Econa family, too SVN-Revision: 27354	2011-07-02 08:31:25 +00:00
Imre Kaloz	535cae8393	mark it broken SVN-Revision: 27349	2011-07-02 07:26:04 +00:00
Jo-Philipp Wich	701543d3ef	revert r27043 (#9513 ) SVN-Revision: 27343	2011-07-01 19:52:57 +00:00
Jo-Philipp Wich	1edef5ec98	revert r27341, it introduce wrong behaviour for other models SVN-Revision: 27342	2011-07-01 19:15:45 +00:00
Jo-Philipp Wich	3b3103b2f1	turn status LED off if device finished initializing SVN-Revision: 27341	2011-07-01 18:39:53 +00:00
Imre Kaloz	0ba94475c9	upgrade avr32 u-boot to 2011.06 SVN-Revision: 27330	2011-07-01 11:32:01 +00:00
Imre Kaloz	84c89fb02d	upgrade to 2.6.39.2 SVN-Revision: 27329	2011-07-01 11:31:08 +00:00
Imre Kaloz	b655c7c85a	preliminary 3.0 support SVN-Revision: 27328	2011-07-01 08:15:48 +00:00
Imre Kaloz	8222c7bb24	add missing kernel symbols SVN-Revision: 27327	2011-07-01 08:11:16 +00:00
Felix Fietkau	a41f80bca1	fix the gpio_dev driver: remove existing forward port patches, use unlocked_ioctl on all platforms and fix the arguments to the ioctl handler (based on patch from #9198 ) SVN-Revision: 27322	2011-07-01 03:20:13 +00:00
Gabor Juhos	f9e4619b97	ar71xx: remove CONFIG_MTD_CONCAT ifdefs from the WZR-HP-AG300H code The config option has been removed in 2.6.39. SVN-Revision: 27320	2011-06-30 12:15:33 +00:00
Hauke Mehrtens	8976fa2622	brcm47xx: deactivate wndr3400 for now as this device will not boot SVN-Revision: 27316	2011-06-29 17:42:34 +00:00
Gabor Juhos	d98476c6bd	ar71xx: merge 2.6.39 patches Also remove the old UART driver for ar933x. SVN-Revision: 27314	2011-06-29 08:57:37 +00:00
Gabor Juhos	74a88749f3	ar71xx: remove 2.6.37 support as well SVN-Revision: 27313	2011-06-29 08:57:36 +00:00
Gabor Juhos	1d5378f588	ar71xx: remove 2.6.38 support SVN-Revision: 27312	2011-06-29 08:57:34 +00:00
Gabor Juhos	36e7a8b33e	ar71xx: switch to 2.6.39 SVN-Revision: 27311	2011-06-29 08:57:33 +00:00
Gabor Juhos	6627574e57	ar71xx: add 2.6.39 support SVN-Revision: 27310	2011-06-29 08:57:32 +00:00
Gabor Juhos	1e138098cd	ar71xx: remove ar71xx_gpio_irq_set_type SVN-Revision: 27309	2011-06-29 08:57:30 +00:00
Gabor Juhos	055e317ed8	ar71xx: add separate handlers for IP3 interrupts SVN-Revision: 27308	2011-06-29 08:57:29 +00:00
Gabor Juhos	59bff8bf18	ar71xx: use separate handlers for IP2 interrupts SVN-Revision: 27307	2011-06-29 08:57:28 +00:00
Gabor Juhos	9d6af600e1	ar71xx: remove useless irq_desc.status initializations SVN-Revision: 27306	2011-06-29 08:57:27 +00:00
Gabor Juhos	01ac07c9b3	generic: add MTD_NAND_ECC_BCH symbol for 2.6.39/3.0 SVN-Revision: 27305	2011-06-29 08:57:25 +00:00
Hauke Mehrtens	8c62c5d109	brcm47xx: generate image to flash on Netgear WNDR3400. The image will not boot because serial flash support is missing this is only for experts. SVN-Revision: 27302	2011-06-28 22:23:21 +00:00
Hauke Mehrtens	4c18da3df6	brcm47xx: add initial support for devices with bcma bus. Ethernet and wifi are not working and this is highly experimental. SVN-Revision: 27301	2011-06-28 22:21:57 +00:00
Hauke Mehrtens	3f0eed15a2	kernel: refresh patches for kernel 3.0-rc5 SVN-Revision: 27300	2011-06-28 20:25:39 +00:00
Hauke Mehrtens	2af4f6f634	kernel: update ssb and bcma to linux-next next-20110628 SVN-Revision: 27299	2011-06-28 19:33:50 +00:00
Hauke Mehrtens	c5821c1a3a	kernel: update kernel to 2.6.39.2 SVN-Revision: 27298	2011-06-28 19:30:58 +00:00
Imre Kaloz	e80ebb769f	ethernet cleanup and sata fix - thanks, Chris SVN-Revision: 27297	2011-06-28 06:54:20 +00:00
Hauke Mehrtens	4c392185a6	brcm47xx: update kernel to version 2.6.39 SVN-Revision: 27296	2011-06-27 21:29:20 +00:00
Hauke Mehrtens	ca979845cc	kernel: update ssb and bcma to linux-next next-20110627 SVN-Revision: 27295	2011-06-27 21:28:40 +00:00
Hauke Mehrtens	e439de144f	brcm47xx: fix Linux-3.0 and fix clock rate detection. SVN-Revision: 27294	2011-06-27 20:20:11 +00:00
Hauke Mehrtens	c1873c46b8	kernel: update ssb and bcma to linux-next next-20110627 SVN-Revision: 27293	2011-06-27 20:18:49 +00:00
Jo-Philipp Wich	2c6bd71767	remove remaining uci-defaults SVN-Revision: 27291	2011-06-27 01:42:31 +00:00
Florian Fainelli	9f63b7326f	geos: deprecate uci-defaults files Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com> SVN-Revision: 27287	2011-06-25 22:05:10 +00:00
Florian Fainelli	1f6047496e	alix2: add config files for bridging Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com> SVN-Revision: 27286	2011-06-25 22:05:05 +00:00
Florian Fainelli	3f40c0f7df	remove gpiodev, prefer sysfs gpio SVN-Revision: 27284	2011-06-25 19:26:17 +00:00
Felix Fietkau	cc56af716c	ar71xx: add default network config for wzr-hp-ag300h (based on a patch from #9607 ) SVN-Revision: 27283	2011-06-25 13:54:42 +00:00
Felix Fietkau	ed7f41792a	ar71xx: bring up secondary radio on wzr-hp-ag300h (fixes #9608 ) SVN-Revision: 27282	2011-06-25 13:48:47 +00:00
Florian Fainelli	85d29f3cd0	add missing linux-3.0 config symbol SVN-Revision: 27269	2011-06-24 11:43:30 +00:00
Florian Fainelli	f6e4eb15bc	register SSB sprom after ethernet devices In case the MAC address pool is not big enough to also register a SSB SPROM prefer registering the Ethernet devices. SVN-Revision: 27258	2011-06-22 12:32:03 +00:00
Florian Fainelli	5a76c6bdd7	fix tab damage in 141-led_count.patch SVN-Revision: 27254	2011-06-21 20:52:58 +00:00
Florian Fainelli	3f0f8d9c87	fix and make usable kmod-pcmcia-rsrc This module is also needed for e.g: kmod-bcm63xx-pcmcia SVN-Revision: 27253	2011-06-21 20:52:53 +00:00
Hauke Mehrtens	1c0d5f5ae2	kernel: refresh patches for kernel 3.0-rc4 SVN-Revision: 27247	2011-06-21 18:39:47 +00:00
Florian Fainelli	9bdf6abb9d	use macros to generate SPI registers table and switches SVN-Revision: 27246	2011-06-21 10:05:51 +00:00
Florian Fainelli	6cb3195b40	fix usb mis-cleanup after r27162 (#9581 ) SVN-Revision: 27243	2011-06-20 10:04:53 +00:00
Jo-Philipp Wich	70fb318a90	Restrict Soekris specific base-files handling to Soekris profiles, based on patch by Philip Prindeville <philipp@redfish-solutions.com> SVN-Revision: 27241	2011-06-19 23:05:21 +00:00
Jo-Philipp Wich	9cd64fa754	generic: Remove IPv6 depependency of bridge in 2.6.38+ Since 2.6.38 the bridge module has a dependency to IPv6 if IPv6 is enabled. Since the IPv6 module isn't exactly lightweight and bridge also only needs a single function from IPv6, it's rather easy to create a common "lib" module with a RCU pointer to the actual implementation, if the IPv6 module is loaded (although slightly hackish). The codepath seems to be only taken when using IPv6, so there should be no negative side effects when IPv6 isn't loaded. I did not measure how big the performance impact is. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 27237	2011-06-19 22:48:53 +00:00
Florian Fainelli	ab74628c10	dev-spi.c checks for running CPU, not board code SVN-Revision: 27236	2011-06-19 20:46:00 +00:00
Florian Fainelli	4dd4cbeb43	fixup patches after r27234 SVN-Revision: 27235	2011-06-19 20:28:38 +00:00
Florian Fainelli	7819b530da	remove accidental bcm6345 related patches SVN-Revision: 27234	2011-06-19 20:16:59 +00:00
Florian Fainelli	12db3df666	remove support for 2.6.37 and 2.6.38 SVN-Revision: 27233	2011-06-19 20:14:22 +00:00
Florian Fainelli	6bb0a608dc	switch to 2.6.39 SVN-Revision: 27232	2011-06-19 20:12:45 +00:00
Florian Fainelli	bcada2640b	remove 2.6.35 and 2.6.32 support SVN-Revision: 27230	2011-06-19 20:09:40 +00:00
Florian Fainelli	67d0ca0b4b	remove pre 2.6.39 patches and config SVN-Revision: 27229	2011-06-19 20:09:00 +00:00
Florian Fainelli	34db3f9f86	remove 2.6.37 patches and config SVN-Revision: 27228	2011-06-19 20:07:26 +00:00
Gabor Juhos	e6af77a1c8	ar71xx: cleanup AR933X UART driver SVN-Revision: 27222	2011-06-19 13:17:51 +00:00
Gabor Juhos	066e04d497	ar71xx: fix uart clock frequency for AR933X SVN-Revision: 27221	2011-06-19 13:17:50 +00:00
Hauke Mehrtens	47e218c426	brcm47xx: refresh patches SVN-Revision: 27219	2011-06-18 15:53:14 +00:00
Hauke Mehrtens	79a7343560	kernel: update to kernel 2.6.38.8 SVN-Revision: 27218	2011-06-18 15:52:15 +00:00
Hauke Mehrtens	75f9e0c615	brcm47xx: add support for kernel 3.0 SVN-Revision: 27217	2011-06-18 15:24:44 +00:00
Rod Whitby	710409740e	ixp4xx: Removed kmod-madwifi from the NSLU2 profile, as the NSLU2 has not wifi capability out of the box. SVN-Revision: 27202	2011-06-17 11:22:22 +00:00
Florian Fainelli	b97459eb88	add missing USBIP_CORE item in config-3.0 SVN-Revision: 27195	2011-06-16 14:34:50 +00:00
Florian Fainelli	540b838998	allow any console to be used SVN-Revision: 27193	2011-06-16 14:34:44 +00:00
Florian Fainelli	426dccd019	bcm63xx: Add support for Linux 3.0-rc3 Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 27192	2011-06-16 14:34:40 +00:00
Hauke Mehrtens	235e331987	linux/generic: Add support for 3.0-rc3 Also make linux identify itself properly as 3.0, not 3.0.0. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 27191	2011-06-15 21:31:01 +00:00
Hauke Mehrtens	bf64ac730a	bcm47xx: Remove kernel checks from image Makefile 2.4 isn't present anymore, so it will always be 2.6 (or newer). Since the 2.6 check will break with 3.0, remove it alltogether. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 27185	2011-06-15 21:11:49 +00:00
Jo-Philipp Wich	5752efdadd	2.6.39.1: missing kernel symbols If you turn on I2C, you'll need this symbol defined. Signed-off-by: Philip A. Prindeville <philipp@redfish-solutions.com> SVN-Revision: 27182	2011-06-15 18:18:32 +00:00
Felix Fietkau	dcddcfca24	add missing kernel config symbols for usb on powerpc SVN-Revision: 27181	2011-06-15 18:07:26 +00:00
Jo-Philipp Wich	d39379296c	backport upstream Kernel commit 1ed2f73d90fb49bcf5704aee7e9084adb882bfc5 (netfilter: IPv6: fix DSCP mangle code) SVN-Revision: 27179	2011-06-15 14:11:33 +00:00
Jo-Philipp Wich	14913ab8b0	revert r26997, it does not apply against 2.6.36.4 SVN-Revision: 27178	2011-06-15 13:51:57 +00:00
Florian Fainelli	685a61eb6c	switch to 2.6.39 SVN-Revision: 27175	2011-06-14 20:05:13 +00:00
Florian Fainelli	0fb8884efe	fix diag.sh with qube2 front led SVN-Revision: 27174	2011-06-14 20:05:09 +00:00
Florian Fainelli	dee0010ae2	resync kernel config SVN-Revision: 27173	2011-06-14 20:05:03 +00:00
John Crispin	0732b2db78	Fix for bug where the iniatialisation of the MAC data private strucure is copied into the wrong location. Ticket #9547 Signed-off-by: Conor O'Gorman <conor at dna.ie> SVN-Revision: 27172	2011-06-13 22:37:23 +00:00
Florian Fainelli	7a96525a6f	replace unfortify patch with a better one Thanks to Richard Weinberger for providing this patch SVN-Revision: 27168	2011-06-13 12:45:12 +00:00
Gabor Juhos	b7e016ba42	ar71xx: use ar933x_uart.h in the AR933X serial driver SVN-Revision: 27166	2011-06-13 08:12:40 +00:00
Gabor Juhos	b58ede16a5	ar71xx: update early_printk code SVN-Revision: 27165	2011-06-13 08:12:38 +00:00
Florian Fainelli	6a5112a750	cleanup files using checkpatch.pl SVN-Revision: 27162	2011-06-12 19:17:57 +00:00
John Crispin	fa59bb0958	* move patches around * add basic support for gigaset sx76x SVN-Revision: 27158	2011-06-12 08:56:26 +00:00
Vasilis Tsiligiannis	70106f153d	Remove trailing spaces, convert spaces to tabs SVN-Revision: 27153	2011-06-09 19:30:50 +00:00
John Crispin	e3e2a170cd	we dont need 1024 bytes buffer. 128 bytes is enough. SVN-Revision: 27143	2011-06-09 07:08:54 +00:00
John Crispin	8329ecf92c	* revert accidental config change SVN-Revision: 27142	2011-06-09 05:10:18 +00:00
John Crispin	ed0e649a5b	* fixes spi flash for ar9 * adds limited support for netgear dgn3500 (enough for others to start working with) SVN-Revision: 27137	2011-06-08 17:57:55 +00:00
Felix Fietkau	9160e06af5	ar71xx: override inittab to enable login on ttyATH0 SVN-Revision: 27128	2011-06-07 17:07:10 +00:00
Florian Fainelli	e7b6721f4e	update to 2.6.39.1 SVN-Revision: 27114	2011-06-04 18:27:14 +00:00
Florian Fainelli	d97f50b69b	define UIMAGE for various rootfs targets SVN-Revision: 27113	2011-06-04 18:27:09 +00:00
Florian Fainelli	429745edd6	use IMG_PREFIX for image name SVN-Revision: 27112	2011-06-04 18:27:04 +00:00
Florian Fainelli	4aaf590909	add more config symbols to 2.6.39 SVN-Revision: 27111	2011-06-04 18:27:00 +00:00
Florian Fainelli	89dd8aed1f	update to 2.6.39.1 SVN-Revision: 27110	2011-06-04 18:26:54 +00:00
Florian Fainelli	72996d2dcb	update to 2.6.39.1 SVN-Revision: 27107	2011-06-04 13:36:09 +00:00
Florian Fainelli	20c0427132	update to 2.6.39.1 SVN-Revision: 27106	2011-06-04 13:36:05 +00:00
Florian Fainelli	de2e05b6f2	add some missing 2.6.39 config symbols SVN-Revision: 27105	2011-06-04 13:36:00 +00:00
Florian Fainelli	763b58c30c	update to 2.6.39.1 patch from Peter Wagner SVN-Revision: 27104	2011-06-04 13:35:55 +00:00
Gabor Juhos	13363d9129	ar71xx: setup wdt_clock for AR913X to avoid a kernel bug Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 27102	2011-06-04 12:30:10 +00:00
Gabor Juhos	ae2cbfa1e8	ar71xx: select the internal antenna by default on the ZCN-1523H boards SVN-Revision: 27101	2011-06-04 12:30:09 +00:00
Florian Fainelli	0de25d1263	update to 2.6.39 SVN-Revision: 27090	2011-06-02 13:45:20 +00:00
Felix Fietkau	31dd60689e	Revert "ar71xx: only enable the rx engine after the link is up..." It messes up the DMA state when the link goes down SVN-Revision: 27088	2011-06-01 18:15:43 +00:00
Gabor Juhos	750af1522b	ar71xx: init external_reset for AR933X SVN-Revision: 27083	2011-06-01 13:12:30 +00:00
Gabor Juhos	af4cae4498	ar71xx: add external_reset field to ath9k_platform_data SVN-Revision: 27082	2011-06-01 13:12:28 +00:00
Gabor Juhos	f0c7b93e5d	ar71xx: init get_mac_revision on AR9330 rev 1 SVN-Revision: 27081	2011-06-01 13:12:27 +00:00
Gabor Juhos	1a54e33c17	ar71xx: add get_mac_revision to ath9k_platform_data SVN-Revision: 27080	2011-06-01 13:12:26 +00:00
Gabor Juhos	34ff32a6eb	ar71xx: export SoC revision SVN-Revision: 27079	2011-06-01 13:12:24 +00:00
Imre Kaloz	2440175978	refresh patches SVN-Revision: 27078	2011-06-01 07:24:41 +00:00
Imre Kaloz	aafa838d77	fixup second led, patch from Chris SVN-Revision: 27077	2011-06-01 07:21:25 +00:00
Felix Fietkau	86dbc3a02d	ar71xx: add profile and image building code for wzr-hp-ag300h SVN-Revision: 27076	2011-06-01 02:23:30 +00:00
Felix Fietkau	4f06b8263a	ar71xx: add kernel support for the buffalo wzr-hp-ag300h SVN-Revision: 27075	2011-06-01 02:23:26 +00:00
Felix Fietkau	56dd5c4388	fix a crash in mtd_concat when the .sync op is not implemented SVN-Revision: 27074	2011-06-01 02:23:22 +00:00
Felix Fietkau	628cb35179	m25p80: add the chip id for the winbond w25q128 chip SVN-Revision: 27073	2011-06-01 02:23:18 +00:00
Imre Kaloz	acbb2db5e2	fixup pcie clock, thanks Chris SVN-Revision: 27072	2011-05-31 23:55:33 +00:00
Gabor Juhos	33fdc21d40	ar71xx: build images for the AP121 boards SVN-Revision: 27070	2011-05-31 22:53:47 +00:00
Gabor Juhos	9e435c03e0	ar71xx: add sysupgrade support for the AP121 boards SVN-Revision: 27069	2011-05-31 22:53:45 +00:00
Gabor Juhos	646937135f	ar71xx: add default network config for the AP121 boards SVN-Revision: 27068	2011-05-31 22:53:44 +00:00
Gabor Juhos	f332dbd7be	ar71xx: add support for the AP121/AP121-MINI reference boards SVN-Revision: 27067	2011-05-31 22:53:43 +00:00
Gabor Juhos	8beff081eb	ar71xx: register UART for the AR933X SoCs SVN-Revision: 27066	2011-05-31 22:53:42 +00:00
Gabor Juhos	b460bc6f12	ar71xx: add serial driver for the AR933X UART SVN-Revision: 27065	2011-05-31 22:53:40 +00:00
Gabor Juhos	c34e0cbc4c	ar71xx: add WMAC initialization code for the AR933X SoCs SVN-Revision: 27064	2011-05-31 22:53:39 +00:00
Gabor Juhos	e8a0aaf9a2	ar71xx: add ethernet initialization for the AR933X SoCs SVN-Revision: 27063	2011-05-31 22:53:37 +00:00
Gabor Juhos	e0a0f3796a	ar71xx: enable USB support for the AR933x SoCs SVN-Revision: 27062	2011-05-31 22:53:36 +00:00
Gabor Juhos	677c80ee17	ar71xx: add AR933x specific glue for ar71xx_device{start,stop} SVN-Revision: 27061	2011-05-31 22:53:35 +00:00
Gabor Juhos	88c45e3130	ar71xx: the watchdog uses the reference clock on the AR933x SoCs SVN-Revision: 27060	2011-05-31 22:53:34 +00:00
Gabor Juhos	7acbacab8c	ar71xx: add AR933x specific glue code for IRQ initialization SVN-Revision: 27059	2011-05-31 22:53:32 +00:00
Gabor Juhos	e6fde61bec	ar71xx: don't register 8250 UART on the AR933x SoCs SVN-Revision: 27058	2011-05-31 22:53:31 +00:00
Gabor Juhos	8f7541a044	ar71xx: enable GPIO support for the AR933x SoCs SVN-Revision: 27057	2011-05-31 22:53:30 +00:00
Gabor Juhos	e11b9c8371	ar71xx: add AR933x specific frequency initialization code SVN-Revision: 27056	2011-05-31 22:53:29 +00:00
Gabor Juhos	0bf4478d37	ar71xx: add AR933x specific early_printk support SVN-Revision: 27055	2011-05-31 22:53:27 +00:00
Gabor Juhos	6b3ca9ef0b	ar71xx: add preliminary support for the Atheros AR933x SoCs SVN-Revision: 27054	2011-05-31 22:53:26 +00:00
Gabor Juhos	761e67b394	ar71xx: stop producing -NA factory images and tag factory images with hd_id for WNDR3700v2 NETGEAR doesnt produce a distinct North American image for WNDR3700v2, they use the same image worldwide. This is a change from earlier models such as WNDR3700 (v1). NETGEAR's v2 images now contain an "hd_id" parameter, as well. All observed WNDR3700v2, WNDR3800, and WNDRMAC images use 29763654+16+64 as their hd_id value. This patch changes the OpenWrt WNDR3700v2 "factory" image generation to stop producing the extraneous -NA version and to tag the image with the same hd_id used in NETGEAR's images. There is no change to WNDR3700 (v1) image generation, as NETGEAR continues to produce distinct -NA and worldwide images, neither of which are tagged with hd_id. Signed-off-by: Mark Mentovai <mark@moxienet.com> SVN-Revision: 27053	2011-05-31 22:53:25 +00:00
Gabor Juhos	c8d182406d	ar71xx: create factory images for the WZR-HP-G30{0,1}NH boards SVN-Revision: 27051	2011-05-31 22:53:22 +00:00
Gabor Juhos	0677e16248	ar71xx: Fix header offset for newer WRT160NL models Newer WRT160NLs have a flash chip with 4K erase blocks instead of 64K, resulting in miscalculated partition sizes. Since the actual sizes did not change, hardcode them to their current sizes, and make sure they are at least one erase block big (in case Cisco decides to start to use chips with 128K erase blocks). Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 27049	2011-05-31 22:53:20 +00:00
Gabor Juhos	be97e2a043	ar71xx: add SOC_AR{71XX,724X,913X,934X} config symbols SVN-Revision: 27048	2011-05-31 22:53:19 +00:00
Gabor Juhos	ea2f6d0edf	ar71xx: reduce the size of the squashfs-4k binaries SVN-Revision: 27047	2011-05-31 22:53:18 +00:00
Gabor Juhos	5d5f72415e	ar71xx: initialize is_clk_25mhz field for AR9340 WMAC SVN-Revision: 27045	2011-05-31 22:53:15 +00:00
Gabor Juhos	f7b3c3dfd1	ar71xx: sync ath9k_platform_data.h with compat-wireless SVN-Revision: 27044	2011-05-31 22:53:14 +00:00
Gabor Juhos	650c7cc2fd	ar71xx: use the diag LED for diagnostic on the WZR-HP-G30XNH boards SVN-Revision: 27043	2011-05-31 22:53:13 +00:00
Gabor Juhos	4834fdaccd	ar71xx: fix uci-defaults script for the WZR-HP-G30XNH boards SVN-Revision: 27042	2011-05-31 22:53:12 +00:00
Gabor Juhos	60d5abbc27	ar71xx: ag71xx: make ring sizes configurable via ethtool SVN-Revision: 27041	2011-05-31 22:53:10 +00:00
Gabor Juhos	7a2651f633	ar71xx: ag71xx: prepare to make ring sizes configurable SVN-Revision: 27040	2011-05-31 22:53:09 +00:00
Gabor Juhos	669aba3871	ar71xx: ag71xx: nuke unused AG71XX_TX_FIFO_LEN define Reported-by: Dave Täht <dave.taht@gmail.com> SVN-Revision: 27039	2011-05-31 22:53:07 +00:00
Felix Fietkau	9567b93e5c	x86: add additional companion chip drivers to alix2 and geos Add the MFGPT high precision timers, and integration into the schedule (clock events). Use OHCI, not UHCI usb module. Remove VIA SATA driver from Alix2... that was accidentally cloned from net5501 platform. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> SVN-Revision: 27038	2011-05-31 16:57:05 +00:00
Felix Fietkau	68af223efe	x86: remove pata-amd driver from generic x86 images, add addition cs553x modules The pata-cs5535/pata-cs5536 driver is actually fairly rare: it only gets used on embedded platforms. Therefore, we remove it from the generic x86 configuration. Also, add definitions for other useful geode modules (high-res timers, MFGPT timers, etc). Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> SVN-Revision: 27037	2011-05-31 16:57:01 +00:00
Mirko Vogt	ba5b3ece5d	purge out CONFIG_CRYPTO* symbols out of target specific kernel configs since OpenWrt is taking care of them SVN-Revision: 27036	2011-05-31 09:47:30 +00:00
Felix Fietkau	2b5402d128	ar71xx: only enable the rx engine after the link is up, fixes a race condition that got rx stuck when the interface is brought up during lots of inbound traffic (thx, matteo) SVN-Revision: 27035	2011-05-30 23:08:01 +00:00
Felix Fietkau	0ebc93831f	ar71xx: disable flow control for ar724x, it can get stuck in a loop of continously sending MAC pause frames SVN-Revision: 27034	2011-05-30 23:07:57 +00:00
Imre Kaloz	f738ca7b9c	upgrade to 2.6.39 SVN-Revision: 27030	2011-05-30 13:55:34 +00:00
John Crispin	6608f419d1	* backport 2.6.8 patches to .39 / .32.33 * remove lqtapi * bump tapi/dsl to .39 * migrate to new ltq_ style api * add amazon_se support SVN-Revision: 27026	2011-05-29 21:19:26 +00:00
Florian Fainelli	016e8dee34	bcm63xx: Add support for 2.6.39 Add support for Kernel 2.6.39. Boots fine on a BCM6358. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 27019	2011-05-27 09:54:52 +00:00
Florian Fainelli	590c82cec1	bcm63xx: Add support for 2.6.38 Add support for Kernel 2.6.38, based on 2.6.38.6. Boots fine on a BCM6358. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 27018	2011-05-27 09:54:48 +00:00
Florian Fainelli	68cb138154	fold 446-board-D4PW_correction.patch in 440-board-D4PW.patch SVN-Revision: 27014	2011-05-26 13:53:00 +00:00
Florian Fainelli	762885081a	renumber patches accordingly SVN-Revision: 27013	2011-05-26 13:52:56 +00:00
Florian Fainelli	2785e3fc12	renumber board patches SVN-Revision: 27012	2011-05-26 12:09:15 +00:00
Hauke Mehrtens	6f7ae75ffa	kernel: exportfs: reallow building as a module It was originally tristate, but was changed to bool to prevent a build breakage in an earlier patch revision (for a new syscall). The actual commit[1] changed it in a way this isn't needed anymore, but accidentially left the EXPORTFS change in. There's no reason for it not being buildable as a module, so changing it back to tristate is fine. see: https://patchwork.kernel.org/patch/812832/ Thank you Jonas Gorski for the patch. SVN-Revision: 27011	2011-05-25 20:57:13 +00:00
Hauke Mehrtens	6769216a64	kernel: generic: Update 2.6.39 to final * Add missing config symbols * Update package/kernel for 2.6.39 CONFIG_BT_L2CAP=y and CONFIG_BT_SCO=y are set to build them into the bluetooth module. Thank you Jonas Gorski for the patch SVN-Revision: 27010	2011-05-25 19:51:40 +00:00
Hauke Mehrtens	c69f2d8788	kernel: some updates for kernel 2.6.39 * add md5sum for kernel * add some missing config symbols * add some ssb patches to make compat-wireless compile Thank you Peter Wagner for the patch SVN-Revision: 27009	2011-05-25 19:32:00 +00:00
Hauke Mehrtens	8137e35a5d	brcm47xx: initial 2.6.39 support for brcm47xx Thank you Peter Wagner for the patch SVN-Revision: 27008	2011-05-25 19:27:08 +00:00
Florian Fainelli	fad3f46f0d	fix mtd warnings Fixes for the following warnings: drivers/mtd/devices/block2mtd.c: In function '_open_bdev': drivers/mtd/devices/block2mtd.c:272:3: warning: ISO C90 forbids mixed declarations and code drivers/mtd/devices/block2mtd.c: In function 'add_device': drivers/mtd/devices/block2mtd.c:399:13: warning: assignment discards qualifiers from pointer target type In the case of 442-block2mtd_probe.patch, it's not until the insertion of a executable statement before the definition that causes a warning, so I've chosen to resolve the issue here by splitting the definition and the initialization into a definition and a statement (and assignment) instead. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> SVN-Revision: 27007	2011-05-25 19:16:58 +00:00
Hauke Mehrtens	f5f989e3fb	brcm47xx: remove old kernel SVN-Revision: 27006	2011-05-25 18:05:54 +00:00
Hauke Mehrtens	06166b01dd	brcm47xx: fix partition layout on SimpleShare devices. The flash driver code should be cleaned up and the broad detection code should be placed into arch code and used here. This fixes #9323 Thank you Will Holmes for the patch. SVN-Revision: 27005	2011-05-25 17:46:34 +00:00
Hamish Guthrie	50d2a84a21	Clean up patch not applying SVN-Revision: 26997	2011-05-24 10:00:36 +00:00
Florian Fainelli	16dfe8b4d1	add support for BT Voyager 2110 (#8810 ) Signed-off-by: Jonathan McCrohan <jmccrohan@gmail.com> SVN-Revision: 26959	2011-05-20 10:06:25 +00:00
Florian Fainelli	6c8387fe15	add support for DSL-2640B rev B2 Signed-off-by: Adrian Feliks <mexit@o2.pl> SVN-Revision: 26958	2011-05-20 10:06:22 +00:00
Florian Fainelli	031ea08ef0	refresh patches SVN-Revision: 26957	2011-05-20 10:06:18 +00:00
Florian Fainelli	3e83f60a66	add support for D-Link DVA-G3810BN/TL This patch adds support for D-Link's DVA-G3810BN/TL product. Signed-off-by: Roman Dumycz <roman@secureas.com> SVN-Revision: 26956	2011-05-20 10:06:15 +00:00
Florian Fainelli	f9f8dcfa70	refresh 2.6.37 patches SVN-Revision: 26955	2011-05-20 10:06:11 +00:00
Florian Fainelli	f0a99c1692	add support for BT Voyager 2500 (#9070 ) SVN-Revision: 26954	2011-05-20 10:06:07 +00:00
Florian Fainelli	acf0ec224f	add support for USR9108 LEDs (#9372 ) SVN-Revision: 26953	2011-05-20 10:06:04 +00:00
Florian Fainelli	58b5a2ca7b	add GT701 LEDs support (#9382 ) SVN-Revision: 26952	2011-05-20 10:06:00 +00:00
Daniel Dickinson	f2c86a3835	Simple typo for kmod- prefix in alix2 target makefile. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> SVN-Revision: 26945	2011-05-19 04:29:40 +00:00
Hamish Guthrie	54415a28d6	Remove override of max80211.sh SVN-Revision: 26936	2011-05-18 12:43:54 +00:00
Hamish Guthrie	e7dfadd012	Move beagleboard base-files to beagleboard sub-target, remove unused mac80211.sh SVN-Revision: 26932	2011-05-18 11:50:36 +00:00
Matteo Croce	17e257925f	ar71xx: don't probe the LAN PHY SVN-Revision: 26924	2011-05-17 11:15:24 +00:00
Matteo Croce	4deecea26b	ar71xx: detect link on LAN ports SVN-Revision: 26922	2011-05-17 11:12:56 +00:00
John Crispin	dfc19a34b4	* adds support for Artec Thincan Signed-of-By: Lauri Võsandi <lauri.vosandi@gmail.com> SVN-Revision: 26919	2011-05-17 10:35:14 +00:00
Felix Fietkau	894d50da25	kernel: backport some ssb changes to support a mac80211 update SVN-Revision: 26911	2011-05-16 21:50:20 +00:00
Jo-Philipp Wich	d475545c91	remove an accidentally copied comment from the option.ko device patch SVN-Revision: 26908	2011-05-15 21:28:12 +00:00
Jo-Philipp Wich	43e002fe5e	add definitions for Alcatel X220D and Huawai E173s to option.ko (#9422 ) SVN-Revision: 26906	2011-05-15 19:17:31 +00:00
Hauke Mehrtens	a4c0645326	kernel: update kernel from 2.6.38.2 to 2.6.38.6 and refresh patches Thank you Peter Wagner for the patch. I refreshed the kernel patches and added the md5sum of the kernel. SVN-Revision: 26905	2011-05-15 17:23:02 +00:00
Matteo Croce	2ea528d1d0	ar71xx: add link detection on Ubiquiti devices WAN port SVN-Revision: 26891	2011-05-14 23:31:50 +00:00
Matteo Croce	c0c2e18452	use correct macros and frame size in ag71xx SVN-Revision: 26890	2011-05-14 23:10:06 +00:00
Matteo Croce	99d1d4f795	ar71xx: cosmetic fixes SVN-Revision: 26889	2011-05-14 23:08:00 +00:00
Hamish Guthrie	d6e96fd7d8	Add new defconfig and profile for es variant SVN-Revision: 26884	2011-05-13 11:49:52 +00:00
Hamish Guthrie	abd4a7df35	Squash uids SVN-Revision: 26883	2011-05-13 10:36:39 +00:00
Daniel Dickinson	09e0d10010	Removed Alix.mk profile which was accidently left as an empty file applying the patch during r26879 and r26880. SVN-Revision: 26882	2011-05-13 07:23:11 +00:00
Daniel Dickinson	8d66bf7e72	Add missed files from previous commit: This patch provides an image suitable for the alix2*, alix3, and alix6 headless (non-VGA equipped) SBC's. Note that the Alix6 uses GPIO 27 to disable wireless transmit (W_DIS#), whereas on all other versions this is used to actuate the speaker. GPIO 1 : SIM select (Alix6) GPIO 6 : LED1 GPIO 25 : LED2 GPIO 27 : LED3 or RFKILL (Alix6) GPIO 24 : Soft switch 1 No kernel version bump. Added i2c-scx200-acb for lm-sensors support. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> SVN-Revision: 26880	2011-05-13 06:08:49 +00:00
Daniel Dickinson	937362f270	This patch provides an image suitable for the alix2*, alix3, and alix6 headless (non-VGA equipped) SBC's. Note that the Alix6 uses GPIO 27 to disable wireless transmit (W_DIS#), whereas on all other versions this is used to actuate the speaker. GPIO 1 : SIM select (Alix6) GPIO 6 : LED1 GPIO 25 : LED2 GPIO 27 : LED3 or RFKILL (Alix6) GPIO 24 : Soft switch 1 No kernel version bump. Added i2c-scx200-acb for lm-sensors support. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> SVN-Revision: 26879	2011-05-13 06:06:42 +00:00
Florian Fainelli	9c8a2d5961	bcm63xx: Add support for the T-Home Speedport W 303V Add the required board definition, default config and image generation for the T-Home Speedport W 303V Typ B. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 26878	2011-05-11 13:34:14 +00:00
Florian Fainelli	7d3b735854	bcm63xx: Update support for the DSL-274xB revision C Rename the DSL-274xB rev C2's board ID to "AW4139" to match the one used for the rev C3 (same hardware) and add a fixup for C2. Also generate images for C3. While we are at it, rename the LEDs to conform to the Linux LED naming conventions. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 26876	2011-05-11 13:33:50 +00:00
Florian Fainelli	0fb1c2d537	bcm63xx: Accept any led with power in its name as power led Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 26875	2011-05-11 13:33:45 +00:00
Florian Fainelli	c6af9c23b7	bcm63xx: Decouple Board ID and image name for fixup Make the fixup board ID independent from the image name to allow using the same board ID for similar devices. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 26874	2011-05-11 13:33:41 +00:00
Florian Fainelli	4ea316216a	switch to 2.6.38 SVN-Revision: 26873	2011-05-11 13:33:34 +00:00
Florian Fainelli	3fc33726a5	add missing 2.6.38 touchscreen config symbols SVN-Revision: 26872	2011-05-11 13:33:30 +00:00
John Crispin	60c125b8e6	(respin) 802.1Q VLAN support for ADM6996M/ADM6996FC This patch adds 802.1Q VLAN support for the ADM6996M chip. The driver is loaded for both the FC and M model. It will detect which of the two chips is connected. The FC model is initialised, but no further functionality is offered. The PHY driver will always report "100 Mbit/s, link up", for both the M and FC models. This reflects the fact that the link between switch chip and Ethernet MAC is always on[1]. Further documentation can be found in the kernel's Documentation/networking/adm6996.txt Signed-of-By: Peter Lebbing <peter@digitalbrains.com> SVN-Revision: 26865	2011-05-09 15:21:58 +00:00
Gabor Juhos	9b5036a29d	ar71xx: populate LED3 on the JA76PF board Patch-by: Cezary Jackiewicz <cezary@eko.one.pl> SVN-Revision: 26862	2011-05-08 21:38:51 +00:00
Gabor Juhos	b39eebdf1e	ar71xx: add uci config for the WLAN LED on the WRT160NL Based on a patch by Magyar Szabolcs <mszabi@freemail.hu> SVN-Revision: 26861	2011-05-08 21:38:49 +00:00
Gabor Juhos	858e2e719b	ar71xx: use phy0tpt trigger for the WLAN LEDs SVN-Revision: 26860	2011-05-08 21:38:48 +00:00
Gabor Juhos	869f3cb718	ar71xx: remove superfluous fifo_cfg overrides SVN-Revision: 26859	2011-05-08 21:38:46 +00:00
Travis Kemen	bc121d5706	ipv6: restore correct ECN handling on TCP xmit Thanks Dave Taht SVN-Revision: 26858	2011-05-08 17:08:06 +00:00
Gabor Juhos	5d77f370d6	ar71xx: ag71xx: make switch register access atomic Reading of the PHY registers occasionally returns with bogus values under heavy load. This misleads the PHY driver and thus causes false link/speed change notifications which leads to performance loss. This is easily noticable during an iperf session: ... [ 3] 52.0-53.0 sec 11.3 MBytes 94.4 Mbits/sec [ 3] 53.0-54.0 sec 11.4 MBytes 95.4 Mbits/sec eth1: link down br-lan: port 2(eth1) entering forwarding state eth1: link up (100Mbps/Full duplex) br-lan: port 2(eth1) entering forwarding state br-lan: port 2(eth1) entering forwarding state [ 3] 54.0-55.0 sec 6.75 MBytes 56.6 Mbits/sec [ 3] 55.0-56.0 sec 0.00 Bytes 0.00 bits/sec [ 3] 56.0-57.0 sec 10.5 MBytes 88.1 Mbits/sec ... [ 3] 169.0-170.0 sec 11.4 MBytes 95.4 Mbits/sec [ 3] 170.0-171.0 sec 11.4 MBytes 95.4 Mbits/sec eth1: link up (10Mbps/Half duplex) [ 3] 171.0-172.0 sec 7.63 MBytes 64.0 Mbits/sec [ 3] 172.0-173.0 sec 9.38 MBytes 78.6 Mbits/sec eth1: link up (100Mbps/Full duplex) [ 3] 173.0-174.0 sec 11.3 MBytes 94.4 Mbits/sec [ 3] 174.0-175.0 sec 11.4 MBytes 95.4 Mbits/sec SVN-Revision: 26856	2011-05-08 16:32:53 +00:00
Gabor Juhos	3711658281	ar71xx: ag71xx: fix section mismatch warnings The function __devinit ag71xx_probe() references a function __devexit ag71xx_phy_disconnect(). This is often seen when error handling in the init function uses functionality in the exit path. The fix is often to remove the __devexit annotation of ag71xx_phy_disconnect() so it may be used outside an exit section. The function ag71xx_phy_disconnect() references a function in an exit section. Often the function ag71xx_ar7240_cleanup() has valid usage outside the exit section and the fix is to remove the __devexit annotation of ag71xx_ar7240_cleanup. SVN-Revision: 26855	2011-05-08 13:30:36 +00:00
Gabor Juhos	ef53029870	ar71xx: ag71xx: fix build error if debugfs is enabled SVN-Revision: 26854	2011-05-08 13:30:26 +00:00
Hauke Mehrtens	732abc44cc	brcm47xx: update patches SVN-Revision: 26846	2011-05-07 12:49:17 +00:00
Gabor Juhos	8b67d748cb	ar71xx: ag71xx: add debugfs entry for [rt]x_ring SVN-Revision: 26845	2011-05-07 12:40:34 +00:00
Gabor Juhos	2166432ba0	ar71xx: ag71xx: add timestamps to ag71xx_buf SVN-Revision: 26844	2011-05-07 12:40:28 +00:00
Gabor Juhos	896e1d1ab4	ar71xx: ag71xx: use dynamically allocated buffer for napi_stats SVN-Revision: 26843	2011-05-07 12:40:26 +00:00
Gabor Juhos	a6708d20d1	ar71xx: ag71xx: use debugfs_remove_recursive SVN-Revision: 26842	2011-05-07 12:40:25 +00:00
Gabor Juhos	c39e5b9360	ar71xx: override wmac device name for the AR934x SoCs SVN-Revision: 26840	2011-05-07 09:23:32 +00:00
Florian Fainelli	fbbe154a48	remove useless patches SVN-Revision: 26837	2011-05-06 12:37:40 +00:00
Florian Fainelli	de02a2795b	fill maintainer infos for a couple of targets SVN-Revision: 26836	2011-05-06 12:37:36 +00:00
Florian Fainelli	1adaa8790d	update to 2.6.38.2 SVN-Revision: 26833	2011-05-05 16:35:44 +00:00
Florian Fainelli	fd33dffe60	add missing 2.6.38 symbols SVN-Revision: 26832	2011-05-05 16:35:40 +00:00
Hauke Mehrtens	fcb1557a3e	brcm47xx: when detecting a ssb pci device without an own sprom write the sprom data from the platform device to the correct pointer. SVN-Revision: 26829	2011-05-05 14:05:21 +00:00
Hauke Mehrtens	54fb8868fa	brcm47xx: fix typo in patch SVN-Revision: 26828	2011-05-05 13:18:35 +00:00

... 31 32 33 34 35 ...

10005 Commits (31876c193aaa8ddbe6c5758aee5754aee257fc44)