ramips: raeth: make debugging messages configurable

SVN-Revision: 30450
lede-17.01
Gabor Juhos 2012-02-11 15:12:10 +00:00
parent aac3ad4c0e
commit 8916c02b47
4 changed files with 16 additions and 4 deletions

View File

@ -40,6 +40,12 @@ static inline void rt305x_esw_exit(void) { }
#define phys_to_bus(a) (a & 0x1FFFFFFF)
#ifdef CONFIG_RAMIPS_ETH_DEBUG
#define RADEBUG(fmt, args...) printk(KERN_DEBUG fmt, ## args)
#else
#define RADEBUG(fmt, args...) do {} while (0)
#endif
static struct net_device * ramips_dev;
static void __iomem *ramips_fe_base = 0;
@ -443,7 +449,7 @@ ramips_eth_stop(struct net_device *dev)
tasklet_kill(&priv->tx_housekeeping_tasklet);
tasklet_kill(&priv->rx_tasklet);
ramips_cleanup_dma(priv);
printk(KERN_DEBUG "ramips_eth: stopped\n");
RADEBUG("ramips_eth: stopped\n");
return 0;
}
@ -532,7 +538,7 @@ ramips_eth_plat_probe(struct platform_device *plat)
goto err_free_dev;
}
printk(KERN_DEBUG "ramips_eth: loaded\n");
RADEBUG("ramips_eth: loaded\n");
return 0;
err_free_dev:
@ -547,7 +553,7 @@ ramips_eth_plat_remove(struct platform_device *plat)
{
unregister_netdev(ramips_dev);
free_netdev(ramips_dev);
printk(KERN_DEBUG "ramips_eth: unloaded\n");
RADEBUG("ramips_eth: unloaded\n");
return 0;
}

View File

@ -1,6 +1,6 @@
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -494,6 +494,12 @@ config MIPS_AU1X00_ENET
@@ -494,6 +494,16 @@ config MIPS_AU1X00_ENET
If you have an Alchemy Semi AU1X00 based system
say Y. Otherwise, say N.
@ -9,6 +9,10 @@
+ depends on MIPS_RALINK
+ help
+ This driver supports the etehrnet mac inside the ralink wisocs
+
+config RAMIPS_ETH_DEBUG
+ bool "Enable debug messages in the Ralink ethernet driver"
+ depends on MIPS_RAMIPS_NET
+
config SGI_IOC3_ETH
bool "SGI IOC3 Ethernet"

View File

@ -91,6 +91,7 @@ CONFIG_RALINK_DEV_GPIO_BUTTONS=y
CONFIG_RALINK_DEV_GPIO_LEDS=y
CONFIG_RALINK_RT288X=y
# CONFIG_RALINK_RT305X is not set
# CONFIG_RAMIPS_ETH_DEBUG is not set
CONFIG_RAMIPS_WDT=y
CONFIG_RT288X_MACH_F5D8235_V1=y
CONFIG_RT288X_MACH_RT_N15=y

View File

@ -90,6 +90,7 @@ CONFIG_RALINK_DEV_GPIO_BUTTONS=y
CONFIG_RALINK_DEV_GPIO_LEDS=y
# CONFIG_RALINK_RT288X is not set
CONFIG_RALINK_RT305X=y
# CONFIG_RAMIPS_ETH_DEBUG is not set
CONFIG_RAMIPS_WDT=y
CONFIG_RT305X_MACH_ALL0256N=y
CONFIG_RT305X_MACH_ARGUS_ATP52B=y