There are no good reasons for keeping this version around when 4.6.3 and
4.6-linaro are there.
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 35805
WNDR3400v2 is based on BCM53xx . Image that is created breaks the router somehow therefore "#".
CFE and NVRAM contain different vars - example:
CFE line original: Device eth0: hwaddr 74-44-01-37-C6-69, ipaddr 192.168.1.1, mask 255.255.255.0
CFE after openwrt: Device eth0: hwaddr 00-FF-FF-FF-FF-FF, ipaddr 192.168.1.1, mask 255.255.255.0
Logs were posted earlier on this mailing list: https://lists.openwrt.org/pipermail/openwrt-devel/2012-July/016174.html
Different logs with factory firmware are in the wiki: http://wiki.openwrt.org/toh/netgear/wndr3400#wndr3400v2
(and on wikidevi for example)
Signed off by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 35790
Added support for the TP-LINK TL-WA830RE v1 Range Extender.
Based on the WA901ND v1 support. Hardware IDs checked against
original firmware. Patch was successfully tested on hardware.
Signed-off-by: Ronald Hecht <ronald.hecht@gmx.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35789
Hex values in nvram seem to be uppercase on my e3200 device.
Define one power led and two buttons (reset/wps).
Signed-off-by: Tijs Van Buggenhout <tvb@able.be>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 35766
nvram variable "boardtype" is unique for now.
-button gpio were taken from nvram.
-led information was taken from dd-wrt
( http://svn.dd-wrt.com/browser/src/router/libutils/utils.c )
I hope that I changed the values correctly.
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 35765
Don't skip build-in modules when generating i2c kmod packages, to allow
empty packages to be generated for satisfying dependencies.
Closes#12259.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 35755
The NO_IRQ symbol is not used by the amba core since
upstream commit:
dfb85185bda373a70409c70c2632b02fb0f8f449
AMBA: get rid of last two uses of NO_IRQ
This gets rid of the last two users of NO_IRQ in AMBA primecell
drivers.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35748
The amba core throws a warning if -1 is used as an
irq value since upstream commit:
2eac58d5026e4ec8b17ff8b62877fea9e1d2f1b3
ARM: amba: make use of -1 IRQs warn
Make the core warn about the use of -1 (NO_IRQ)
Cange the value of the unused IRQs to zero for the
UART devices to get rid of the warning.
Based on #12729.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35747
Luka Perkov
Florian Fainelli
Felix Fietkau
Steven Barth
Gabor Juhos
Hauke Mehrtens
Jonas Gorski
Jo-Philipp Wich
Geoff Levand