hak5
/
openwrt
mirror of https://github.com/hak5/openwrt.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

ramips: add support for 3.8 

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35801
lede-17.01
Gabor Juhos 2013-02-25 21:28:42 +00:00
parent a08646642e
commit 5412b6f32e
14 changed files with 788 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

29
target/linux/ramips/patches-3.8/001-mips-add-cp0-compare-irq-function.patch Normal file
View File

@ -0,0 +1,29 @@
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -55,6 +55,7 @@
#include <asm/types.h>
#include <asm/stacktrace.h>
#include <asm/uasm.h>
+#include <asm/time.h>
extern void check_wait(void);
extern asmlinkage void r4k_wait(void);
@@ -1617,6 +1618,8 @@ void __cpuinit per_cpu_trap_init(bool is
if (cpu_has_mips_r2) {
cp0_compare_irq_shift = CAUSEB_TI - CAUSEB_IP;
cp0_compare_irq = (read_c0_intctl() >> INTCTLB_IPTI) & 7;
+ if (get_c0_compare_irq)
+ cp0_compare_irq = get_c0_compare_irq();
cp0_perfcount_irq = (read_c0_intctl() >> INTCTLB_IPPCI) & 7;
if (cp0_perfcount_irq == cp0_compare_irq)
cp0_perfcount_irq = -1;
--- a/arch/mips/include/asm/time.h
+++ b/arch/mips/include/asm/time.h
@@ -51,6 +51,7 @@ extern int (*perf_irq)(void);
* Initialize the calling CPU's compare interrupt as clockevent device
*/
extern unsigned int __weak get_c0_compare_int(void);
+extern unsigned int __weak get_c0_compare_irq(void);
extern int r4k_clockevent_init(void);
static inline int mips_clockevent_init(void)

20
target/linux/ramips/patches-3.8/010-mtd_fix_cfi_cmdset_0002_erase_status_check.patch Normal file
View File

@ -0,0 +1,20 @@
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
@@ -1939,7 +1939,7 @@ static int __xipram do_erase_chip(struct
chip->erase_suspended = 0;
}
- if (chip_ready(map, adr))
+ if (chip_good(map, adr, map_word_ff(map)))
break;
if (time_after(jiffies, timeo)) {
@@ -2028,7 +2028,7 @@ static int __xipram do_erase_oneblock(st
chip->erase_suspended = 0;
}
- if (chip_ready(map, adr)) {
+ if (chip_good(map, adr, map_word_ff(map))) {
xip_enable(map, chip, adr);
break;
}

61
target/linux/ramips/patches-3.8/011-mtd-cfi_cmdset_0002-force-word-write.patch Normal file
View File

@ -0,0 +1,61 @@
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
@@ -39,7 +39,7 @@
#include <linux/mtd/xip.h>
#define AMD_BOOTLOC_BUG
-#define FORCE_WORD_WRITE 0
+#define FORCE_WORD_WRITE 1
#define MAX_WORD_RETRIES 3
@@ -50,7 +50,9 @@
static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
+#if !FORCE_WORD_WRITE
static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
+#endif
static int cfi_amdstd_erase_chip(struct mtd_info *, struct erase_info *);
static int cfi_amdstd_erase_varsize(struct mtd_info *, struct erase_info *);
static void cfi_amdstd_sync (struct mtd_info *);
@@ -186,6 +188,7 @@ static void fixup_amd_bootblock(struct m
}
#endif
+#if !FORCE_WORD_WRITE
static void fixup_use_write_buffers(struct mtd_info *mtd)
{
struct map_info *map = mtd->priv;
@@ -195,6 +198,7 @@ static void fixup_use_write_buffers(stru
mtd->_write = cfi_amdstd_write_buffers;
}
}
+#endif /* !FORCE_WORD_WRITE */
/* Atmel chips don't use the same PRI format as AMD chips */
static void fixup_convert_atmel_pri(struct mtd_info *mtd)
@@ -1443,6 +1447,7 @@ static int cfi_amdstd_write_words(struct
/*
* FIXME: interleaved mode not tested, and probably not supported!
*/
+#if !FORCE_WORD_WRITE
static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
unsigned long adr, const u_char *buf,
int len)
@@ -1567,7 +1572,6 @@ static int __xipram do_write_buffer(stru
return ret;
}
-
static int cfi_amdstd_write_buffers(struct mtd_info *mtd, loff_t to, size_t len,
size_t *retlen, const u_char *buf)
{
@@ -1642,6 +1646,7 @@ static int cfi_amdstd_write_buffers(stru
return 0;
}
+#endif /* !FORCE_WORD_WRITE */
/*
* Wait for the flash chip to become ready to write data

39
target/linux/ramips/patches-3.8/100-mips-ralink-core.patch Normal file
View File

@ -0,0 +1,39 @@
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -104,6 +104,9 @@ config ATH79
help
Support for the Atheros AR71XX/AR724X/AR913X SoCs.
+config MIPS_RALINK
+ bool "Ralink MIPS SoC based boards"
+
config BCM47XX
bool "Broadcom BCM47XX based boards"
select ARCH_WANT_OPTIONAL_GPIOLIB
@@ -845,6 +848,7 @@ source "arch/mips/jz4740/Kconfig"
source "arch/mips/lantiq/Kconfig"
source "arch/mips/lasat/Kconfig"
source "arch/mips/pmc-sierra/Kconfig"
+source "arch/mips/ralink/Kconfig"
source "arch/mips/powertv/Kconfig"
source "arch/mips/sgi-ip27/Kconfig"
source "arch/mips/sibyte/Kconfig"
@@ -1172,7 +1176,7 @@ config BOOT_ELF32
config MIPS_L1_CACHE_SHIFT
int
- default "4" if MACH_DECSTATION || MIKROTIK_RB532 || PMC_MSP4200_EVAL
+ default "4" if MACH_DECSTATION || MIKROTIK_RB532 || PMC_MSP4200_EVAL || RALINK_RT288X
default "6" if MIPS_CPU_SCACHE
default "7" if SGI_IP22 || SGI_IP27 || SGI_IP28 || SNI_RM || CPU_CAVIUM_OCTEON
default "5"
--- a/arch/mips/Kbuild.platforms
+++ b/arch/mips/Kbuild.platforms
@@ -22,6 +22,7 @@ platforms += pmc-sierra
platforms += pnx833x
platforms += pnx8550
platforms += powertv
+platforms += ralink
platforms += rb532
platforms += sgi-ip22
platforms += sgi-ip27

89
target/linux/ramips/patches-3.8/101-rt288x_serial_driver_hack.patch Normal file
View File

@ -0,0 +1,89 @@
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -249,6 +249,14 @@ config SERIAL_8250_ACORN
system, say Y to this option. The driver can handle 1, 2, or 3 port
cards. If unsure, say N.
+config SERIAL_8250_RT288X
+ bool "Ralink RT288x/RT305x/RT3662/RT3883 serial port support"
+ depends on SERIAL_8250 != n && (SOC_RT288X || SOC_RT305X || SOC_RT3883)
+ help
+ If you have a Ralink RT288x/RT305x SoC based board and want to use the
+ serial port, say Y to this option. The driver can handle up to 2 serial
+ ports. If unsure, say N.
+
config SERIAL_8250_RM9K
bool "Support for MIPS RM9xxx integrated serial port"
depends on SERIAL_8250 != n && SERIAL_RM9000
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -134,7 +134,7 @@ struct uart_port {
#define UPIO_HUB6 (1)
#define UPIO_MEM (2)
#define UPIO_MEM32 (3)
-#define UPIO_AU (4) /* Au1x00 type IO */
+#define UPIO_AU (4) /* Au1x00 and RT288x type IO */
#define UPIO_TSI (5) /* Tsi108/109 type IO */
#define UPIO_RM9000 (6) /* RM9000 type IO */
--- a/drivers/tty/serial/8250/8250.c
+++ b/drivers/tty/serial/8250/8250.c
@@ -324,9 +324,9 @@ static void default_serial_dl_write(stru
serial_out(up, UART_DLM, value >> 8 & 0xff);
}
-#ifdef CONFIG_MIPS_ALCHEMY
+#if defined CONFIG_MIPS_ALCHEMY || defined (CONFIG_SERIAL_8250_RT288X)
-/* Au1x00 UART hardware has a weird register layout */
+/* Au1x00 and RT288x UART hardware has a weird register layout */
static const u8 au_io_in_map[] = {
[UART_RX] = 0,
[UART_IER] = 2,
@@ -506,7 +506,7 @@ static void set_io_from_upio(struct uart
break;
#endif
-#ifdef CONFIG_MIPS_ALCHEMY
+#if defined(CONFIG_MIPS_ALCHEMY) || defined(CONFIG_SERIAL_8250_RT288X)
case UPIO_AU:
p->serial_in = au_serial_in;
p->serial_out = au_serial_out;
@@ -731,22 +731,19 @@ static int size_fifo(struct uart_8250_po
*/
static unsigned int autoconfig_read_divisor_id(struct uart_8250_port *p)
{
- unsigned char old_dll, old_dlm, old_lcr;
+ unsigned char old_lcr;
+ unsigned int old_dl;
unsigned int id;
old_lcr = serial_in(p, UART_LCR);
serial_out(p, UART_LCR, UART_LCR_CONF_MODE_A);
- old_dll = serial_in(p, UART_DLL);
- old_dlm = serial_in(p, UART_DLM);
+ old_dl = serial_dl_read(p);
- serial_out(p, UART_DLL, 0);
- serial_out(p, UART_DLM, 0);
+ serial_dl_write(p, 0);
+ id = serial_dl_read(p);
- id = serial_in(p, UART_DLL) | serial_in(p, UART_DLM) << 8;
-
- serial_out(p, UART_DLL, old_dll);
- serial_out(p, UART_DLM, old_dlm);
+ serial_dl_write(p, old_dl);
serial_out(p, UART_LCR, old_lcr);
return id;
@@ -872,7 +869,7 @@ static int broken_efr(struct uart_8250_p
/*
* Exar ST16C2550 "A2" devices incorrectly detect as
* having an EFR, and report an ID of 0x0201. See
- * http://linux.derkeiler.com/Mailing-Lists/Kernel/2004-11/4812.html
+ * http://linux.derkeiler.com/Mailing-Lists/Kernel/2004-11/4812.html
*/
if (autoconfig_read_divisor_id(up) == 0x0201 && size_fifo(up) == 16)
return 1;

10
target/linux/ramips/patches-3.8/102-rt288x-pci-driver-hook.patch Normal file
View File

@ -0,0 +1,10 @@
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -21,6 +21,7 @@ obj-$(CONFIG_BCM63XX) += pci-bcm63xx.o
obj-$(CONFIG_MIPS_ALCHEMY) += pci-alchemy.o
obj-$(CONFIG_SOC_AR71XX) += pci-ar71xx.o
obj-$(CONFIG_PCI_AR724X) += pci-ar724x.o
+obj-$(CONFIG_SOC_RT288X) += pci-rt288x.o
#
# These are still pretty much in the old state, watch, go blind.

20
target/linux/ramips/patches-3.8/103-ethernet.patch Normal file
View File

@ -0,0 +1,20 @@
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -136,6 +136,7 @@ source "drivers/net/ethernet/packetengin
source "drivers/net/ethernet/pasemi/Kconfig"
source "drivers/net/ethernet/qlogic/Kconfig"
source "drivers/net/ethernet/racal/Kconfig"
+source "drivers/net/ethernet/ramips/Kconfig"
source "drivers/net/ethernet/realtek/Kconfig"
source "drivers/net/ethernet/renesas/Kconfig"
source "drivers/net/ethernet/rdc/Kconfig"
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -54,6 +54,7 @@ obj-$(CONFIG_NET_PACKET_ENGINE) += packe
obj-$(CONFIG_NET_VENDOR_PASEMI) += pasemi/
obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/
obj-$(CONFIG_NET_VENDOR_RACAL) += racal/
+obj-$(CONFIG_NET_RAMIPS) += ramips/
obj-$(CONFIG_NET_VENDOR_REALTEK) += realtek/
obj-$(CONFIG_SH_ETH) += renesas/
obj-$(CONFIG_NET_VENDOR_RDC) += rdc/

26
target/linux/ramips/patches-3.8/104-ramips-watchdog-driver.patch Normal file
View File

@ -0,0 +1,26 @@
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -1076,6 +1076,13 @@ config LANTIQ_WDT
help
Hardware driver for the Lantiq SoC Watchdog Timer.
+config RAMIPS_WDT
+ tristate "Ralink RT288X/RT305X Watchdog Timer"
+ depends on (SOC_RT288X || SOC_RT305X || SOC_RT3883)
+ help
+ Hardware driver for the built-in watchdog timer on the
+ Ralink RT288X/RT305X SoCs.
+
# PARISC Architecture
# POWERPC Architecture
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -132,6 +132,7 @@ obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
obj-$(CONFIG_OCTEON_WDT) += octeon-wdt.o
octeon-wdt-y := octeon-wdt-main.o octeon-wdt-nmi.o
obj-$(CONFIG_LANTIQ_WDT) += lantiq_wdt.o
+obj-$(CONFIG_RAMIPS_WDT) += ramips_wdt.o
# PARISC Architecture

25
target/linux/ramips/patches-3.8/105-ramips-spi-driver.patch Normal file
View File

@ -0,0 +1,25 @@
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -324,6 +324,12 @@ config SPI_RSPI
help
SPI driver for Renesas RSPI blocks.
+config SPI_RAMIPS
+ tristate "Ralink RT288x/RT305x/RT3662 SPI Controller"
+ depends on (SOC_RT288X || SOC_RT305X || SOC_RT3883)
+ help
+ This selects a driver for the Ralink RT288x/RT305x SPI Controller.
+
config SPI_S3C24XX
tristate "Samsung S3C24XX series SPI"
depends on ARCH_S3C24XX && EXPERIMENTAL
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -50,6 +50,7 @@ obj-$(CONFIG_SPI_PL022) += spi-pl022.o
obj-$(CONFIG_SPI_PPC4xx) += spi-ppc4xx.o
obj-$(CONFIG_SPI_PXA2XX) += spi-pxa2xx.o
obj-$(CONFIG_SPI_PXA2XX_PCI) += spi-pxa2xx-pci.o
+obj-$(CONFIG_SPI_RAMIPS) += spi-ramips.o
obj-$(CONFIG_SPI_RSPI) += spi-rspi.o
obj-$(CONFIG_SPI_S3C24XX) += spi-s3c24xx-hw.o
spi-s3c24xx-hw-y := spi-s3c24xx.o

20
target/linux/ramips/patches-3.8/105-usb_dwc_otg.patch Normal file
View File

@ -0,0 +1,20 @@
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -188,4 +188,6 @@ source "drivers/usb/gadget/Kconfig"
source "drivers/usb/otg/Kconfig"
+source "drivers/usb/dwc_otg/Kconfig"
+
endif # USB_SUPPORT
--- a/drivers/usb/Makefile
+++ b/drivers/usb/Makefile
@@ -52,6 +52,8 @@ obj-$(CONFIG_EARLY_PRINTK_DBGP) += early
obj-$(CONFIG_USB_ATM) += atm/
obj-$(CONFIG_USB_SPEEDTOUCH) += atm/
+obj-$(CONFIG_DWC_OTG) += dwc_otg/
+
obj-$(CONFIG_USB_MUSB_HDRC) += musb/
obj-$(CONFIG_USB_CHIPIDEA) += chipidea/
obj-$(CONFIG_USB_RENESAS_USBHS) += renesas_usbhs/

10
target/linux/ramips/patches-3.8/106-rt3883-pci-support.patch Normal file
View File

@ -0,0 +1,10 @@
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -22,6 +22,7 @@ obj-$(CONFIG_MIPS_ALCHEMY) += pci-alchem
obj-$(CONFIG_SOC_AR71XX) += pci-ar71xx.o
obj-$(CONFIG_PCI_AR724X) += pci-ar724x.o
obj-$(CONFIG_SOC_RT288X) += pci-rt288x.o
+obj-$(CONFIG_SOC_RT3883) += pci-rt3883.o
#
# These are still pretty much in the old state, watch, go blind.

133
target/linux/ramips/rt288x/config-3.8 Normal file
View File

@ -0,0 +1,133 @@
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_CEVT_R4K=y
CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
CONFIG_CMDLINE_BOOL=y
# CONFIG_CMDLINE_OVERRIDE is not set
CONFIG_CPU_GENERIC_DUMP_TLB=y
CONFIG_CPU_HAS_PREFETCH=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_CPU_MIPS32=y
# CONFIG_CPU_MIPS32_R1 is not set
CONFIG_CPU_MIPS32_R2=y
CONFIG_CPU_MIPSR2=y
CONFIG_CPU_R4K_CACHE_TLB=y
CONFIG_CPU_R4K_FPU=y
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_HIGHMEM=y
CONFIG_CSRC_R4K=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_ATOMIC64=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_IO=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
CONFIG_HARDWARE_WATCHPOINTS=y
CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_HAVE_DEBUG_KMEMLEAK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_HAVE_GENERIC_HARDIRQS=y
CONFIG_HAVE_IDE=y
CONFIG_HAVE_IRQ_WORK=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_HAVE_NET_DSA=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_HW_HAS_PCI=y
CONFIG_HW_RANDOM=m
CONFIG_IMAGE_CMDLINE_HACK=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_IP17XX_PHY=y
CONFIG_IRQ_CPU=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_MDIO_BOARDINFO=y
# CONFIG_MII is not set
CONFIG_MIPS=y
# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
CONFIG_MIPS_L1_CACHE_SHIFT=4
CONFIG_MIPS_MACHINE=y
CONFIG_MIPS_MT_DISABLED=y
CONFIG_MIPS_RALINK=y
# CONFIG_MIPS_SEAD3 is not set
CONFIG_MODULES_USE_ELF_REL=y
# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_PER_CPU_KM=y
CONFIG_NET_RAMIPS=y
# CONFIG_NET_RAMIPS_DEBUG is not set
# CONFIG_NET_RAMIPS_DEBUG_FS is not set
CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PERCPU_RWSEM=y
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PHYLIB=y
# CONFIG_PREEMPT_RCU is not set
CONFIG_RALINK_DEV_GPIO_BUTTONS=y
CONFIG_RALINK_DEV_GPIO_LEDS=y
CONFIG_RALINK_RT288X=y
# CONFIG_RALINK_RT305X is not set
# CONFIG_RALINK_RT3883 is not set
CONFIG_RAMIPS_WDT=y
CONFIG_RT288X_MACH_BR6524N=y
CONFIG_RT288X_MACH_F5D8235_V1=y
CONFIG_RT288X_MACH_RT_N15=y
CONFIG_RT288X_MACH_V11ST_FE=y
CONFIG_RT288X_MACH_WLI_TX4_AG300N=y
CONFIG_RT288X_MACH_WZR_AGL300NH=y
CONFIG_RTL8366S_PHY=y
CONFIG_RTL8366_SMI=y
# CONFIG_SCSI_DMA is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RT288X=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_SOC_RT288X=y
CONFIG_SWCONFIG=y
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
CONFIG_SYS_HAS_CPU_MIPS32_R2=y
CONFIG_SYS_HAS_EARLY_PRINTK=y
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
CONFIG_TICK_CPU_ACCOUNTING=y
CONFIG_UIDGID_CONVERTED=y
CONFIG_USB_ARCH_HAS_XHCI=y
CONFIG_USB_SUPPORT=y
CONFIG_ZONE_DMA_FLAG=0

166
target/linux/ramips/rt305x/config-3.8 Normal file
View File

@ -0,0 +1,166 @@
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_CEVT_R4K=y
CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
CONFIG_CMDLINE_BOOL=y
# CONFIG_CMDLINE_OVERRIDE is not set
CONFIG_CPU_GENERIC_DUMP_TLB=y
CONFIG_CPU_HAS_PREFETCH=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_CPU_MIPS32=y
# CONFIG_CPU_MIPS32_R1 is not set
CONFIG_CPU_MIPS32_R2=y
CONFIG_CPU_MIPSR2=y
CONFIG_CPU_R4K_CACHE_TLB=y
CONFIG_CPU_R4K_FPU=y
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_HIGHMEM=y
CONFIG_CSRC_R4K=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DMA_NONCOHERENT=y
# CONFIG_DWC_OTG is not set
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_ATOMIC64=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_IO=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
CONFIG_HARDWARE_WATCHPOINTS=y
CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_HAVE_DEBUG_KMEMLEAK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_HAVE_GENERIC_HARDIRQS=y
CONFIG_HAVE_IDE=y
CONFIG_HAVE_IRQ_WORK=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_HAVE_NET_DSA=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_HW_RANDOM=m
CONFIG_IMAGE_CMDLINE_HACK=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_IRQ_CPU=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_M25PXX_USE_FAST_READ=y
CONFIG_MDIO_BOARDINFO=y
# CONFIG_MII is not set
CONFIG_MIPS=y
# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
CONFIG_MIPS_L1_CACHE_SHIFT=5
CONFIG_MIPS_MACHINE=y
CONFIG_MIPS_MT_DISABLED=y
CONFIG_MIPS_RALINK=y
# CONFIG_MIPS_SEAD3 is not set
CONFIG_MODULES_USE_ELF_REL=y
# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_M25P80=y
CONFIG_MTD_PHYSMAP=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_PER_CPU_KM=y
CONFIG_NET_RAMIPS=y
# CONFIG_NET_RAMIPS_DEBUG is not set
# CONFIG_NET_RAMIPS_DEBUG_FS is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_PERCPU_RWSEM=y
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PHYLIB=y
# CONFIG_PREEMPT_RCU is not set
CONFIG_RALINK_DEV_GPIO_BUTTONS=y
CONFIG_RALINK_DEV_GPIO_LEDS=y
# CONFIG_RALINK_RT288X is not set
CONFIG_RALINK_RT305X=y
# CONFIG_RALINK_RT3883 is not set
CONFIG_RAMIPS_WDT=y
CONFIG_RT305X_MACH_3G300M=y
CONFIG_RT305X_MACH_3G_6200N=y
CONFIG_RT305X_MACH_AIR3GII=y
CONFIG_RT305X_MACH_ALL0256N=y
CONFIG_RT305X_MACH_ALL5002=y
CONFIG_RT305X_MACH_ARGUS_ATP52B=y
CONFIG_RT305X_MACH_BC2=y
CONFIG_RT305X_MACH_BR6425=y
CONFIG_RT305X_MACH_BROADWAY=y
CONFIG_RT305X_MACH_CARAMBOLA=y
CONFIG_RT305X_MACH_DAP_1350=y
CONFIG_RT305X_MACH_DIR_300_REVB=y
CONFIG_RT305X_MACH_DIR_615_H1=y
CONFIG_RT305X_MACH_ESR_9753=y
CONFIG_RT305X_MACH_F5D8235_V2=y
CONFIG_RT305X_MACH_FONERA20N=y
CONFIG_RT305X_MACH_FREESTATION5=y
CONFIG_RT305X_MACH_HW550_3G=y
CONFIG_RT305X_MACH_MOFI3500_3GN=y
CONFIG_RT305X_MACH_MZKW300NH2=y
CONFIG_RT305X_MACH_NBG_419N=y
CONFIG_RT305X_MACH_NW718=y
CONFIG_RT305X_MACH_OMNI_EMB=y
CONFIG_RT305X_MACH_PSR_680W=y
CONFIG_RT305X_MACH_PWH2004=y
CONFIG_RT305X_MACH_RT_G32_REVB=y
CONFIG_RT305X_MACH_RT_N10_PLUS=y
CONFIG_RT305X_MACH_RT_N13U=y
CONFIG_RT305X_MACH_SL_R7205=y
CONFIG_RT305X_MACH_UR_336UN=y
CONFIG_RT305X_MACH_V22RW_2X2=y
CONFIG_RT305X_MACH_W306R_V20=y
CONFIG_RT305X_MACH_W502U=y
CONFIG_RT305X_MACH_WCR150GN=y
CONFIG_RT305X_MACH_WHR_G300N=y
CONFIG_RT305X_MACH_WL341V3=y
CONFIG_RT305X_MACH_WL351=y
CONFIG_RT305X_MACH_WL_330N=y
CONFIG_RT305X_MACH_WL_330N3G=y
CONFIG_RT305X_MACH_WR512_3GN=y
CONFIG_RT305X_MACH_WR6202=y
CONFIG_RT305X_MACH_XDX_RN502J=y
# CONFIG_SCSI_DMA is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RT288X=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_SOC_RT305X=y
CONFIG_SPI=y
CONFIG_SPI_MASTER=y
CONFIG_SPI_RAMIPS=y
CONFIG_SWCONFIG=y
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
CONFIG_SYS_HAS_CPU_MIPS32_R2=y
CONFIG_SYS_HAS_EARLY_PRINTK=y
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
CONFIG_TICK_CPU_ACCOUNTING=y
CONFIG_UIDGID_CONVERTED=y
# CONFIG_USB_ARCH_HAS_XHCI is not set
CONFIG_USB_SUPPORT=y
CONFIG_ZONE_DMA_FLAG=0

140
target/linux/ramips/rt3883/config-3.8 Normal file
View File

@ -0,0 +1,140 @@
CONFIG_AR8216_PHY=y
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_CEVT_R4K=y
CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
CONFIG_CMDLINE_BOOL=y
# CONFIG_CMDLINE_OVERRIDE is not set
CONFIG_CPU_GENERIC_DUMP_TLB=y
CONFIG_CPU_HAS_PREFETCH=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_CPU_MIPS32=y
# CONFIG_CPU_MIPS32_R1 is not set
CONFIG_CPU_MIPS32_R2=y
CONFIG_CPU_MIPSR2=y
CONFIG_CPU_R4K_CACHE_TLB=y
CONFIG_CPU_R4K_FPU=y
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_HIGHMEM=y
CONFIG_CSRC_R4K=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_EARLY_PRINTK=y
CONFIG_ETHERNET_PACKET_MANGLE=y
CONFIG_GENERIC_ATOMIC64=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_IO=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
CONFIG_HARDWARE_WATCHPOINTS=y
CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_HAVE_DEBUG_KMEMLEAK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_HAVE_GENERIC_HARDIRQS=y
CONFIG_HAVE_IDE=y
CONFIG_HAVE_IRQ_WORK=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_HAVE_NET_DSA=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_HW_HAS_PCI=y
CONFIG_HW_RANDOM=m
CONFIG_IMAGE_CMDLINE_HACK=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_IRQ_CPU=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_M25PXX_USE_FAST_READ=y
CONFIG_MDIO_BOARDINFO=y
# CONFIG_MII is not set
CONFIG_MIPS=y
# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
CONFIG_MIPS_L1_CACHE_SHIFT=5
CONFIG_MIPS_MACHINE=y
CONFIG_MIPS_MT_DISABLED=y
CONFIG_MIPS_RALINK=y
# CONFIG_MIPS_SEAD3 is not set
CONFIG_MODULES_USE_ELF_REL=y
# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_M25P80=y
CONFIG_MTD_PHYSMAP=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_PER_CPU_KM=y
CONFIG_NET_RAMIPS=y
# CONFIG_NET_RAMIPS_DEBUG is not set
# CONFIG_NET_RAMIPS_DEBUG_FS is not set
CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_PCI=y
CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
CONFIG_PCI_DOMAINS=y
CONFIG_PERCPU_RWSEM=y
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PHYLIB=y
# CONFIG_PREEMPT_RCU is not set
CONFIG_RALINK_DEV_GPIO_BUTTONS=y
CONFIG_RALINK_DEV_GPIO_LEDS=y
# CONFIG_RALINK_RT288X is not set
# CONFIG_RALINK_RT305X is not set
CONFIG_RALINK_RT3883=y
CONFIG_RAMIPS_WDT=y
CONFIG_RT3883_MACH_DIR_645=y
CONFIG_RT3883_MACH_OMNI_EMB_HPM=y
CONFIG_RT3883_MACH_RT_N56U=y
CONFIG_RT3883_MACH_TEW_691GR=y
CONFIG_RT3883_MACH_TEW_692GR=y
CONFIG_RTL8366_SMI=y
CONFIG_RTL8367B_PHY=y
CONFIG_RTL8367_PHY=y
# CONFIG_SCSI_DMA is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RT288X=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_SOC_RT3883=y
CONFIG_SPI=y
CONFIG_SPI_MASTER=y
CONFIG_SPI_RAMIPS=y
CONFIG_SWCONFIG=y
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
CONFIG_SYS_HAS_CPU_MIPS32_R2=y
CONFIG_SYS_HAS_EARLY_PRINTK=y
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
CONFIG_TICK_CPU_ACCOUNTING=y
CONFIG_UIDGID_CONVERTED=y
CONFIG_USB_ARCH_HAS_XHCI=y
CONFIG_USB_SUPPORT=y
CONFIG_WATCHDOG_CORE=y
CONFIG_ZONE_DMA_FLAG=0