6d44499f99
handle impossible default state since that's what we do now
2014-09-21 20:40:33 +02:00
a0ed27c161
reorganization of several MSP methods, small optimizations
2014-09-21 20:31:57 +02:00
4412f9c263
default and initial setup renamed to landing and setup, including object adjustments
2014-09-20 13:51:23 +02:00
741961cce4
new connect message informing about missing capability
2014-09-19 18:21:01 +02:00
5d9b28c5c7
add MSP_SET_RCMAP to cruncher
2014-09-19 16:11:26 +02:00
0c175725b1
support for currentscale and currentoffset, ui fully working both read and write
2014-09-18 13:21:48 +02:00
800bfd59c8
support for multiwiicurrentoutput
2014-09-18 12:24:38 +02:00
ba046031ed
add midthrottle (midRc) as requested, placeholder multiwiicurrentoutput variable
2014-09-17 20:13:13 +02:00
fee5219a73
move index to ascii conversion for rcmap out of msp protocol, define feature index array (will get a proper text polish in the future)
...
updating mixer select with missing names
2014-09-17 11:23:31 +02:00
e9c4a533af
finishing touches to the crunching mechanism, backup and restore is all cleaned up now
2014-09-17 09:27:54 +02:00
e626fbeb7b
utilizing the new data cruncher in various tabs (aux, pid, receiver) and in restore routines, unfinished (looking solid)
2014-09-16 23:07:52 +02:00
bfb6e17187
removing obsolete code
2014-09-16 21:17:53 +02:00
0649a59b13
function returning specific byte from 32 bit variables (untested)
2014-09-16 19:26:06 +02:00
8a951acb82
new generic crunching mechanism that will be used with all of the future set messages
2014-09-16 19:24:10 +02:00
c37b9ff0f1
merging MISCv2 into MISC since its both data structure and old fw/new fw compatible
2014-09-16 15:43:04 +02:00
7e8b1781da
add RC_MAP, BF_CONFIG for storing new info that is now available, working channelLetter mapping, unfinished MISCv2
2014-09-16 14:48:36 +02:00
97d3a24787
update msp layer with new transmission codes, add transparent methods to handle the incoming data (temporary)
2014-09-16 13:36:10 +02:00
066c355170
Remove baseflight references from filenames.
2014-09-14 13:46:30 +01:00
e20806c7a8
only fire recovery routine once if bus is not recoverable
2014-09-14 14:08:28 +02:00
25edf3a4bf
improving the async transmission part in serial layer
2014-09-13 15:01:32 +02:00
4b96bb39b5
updating analytics lib
2014-09-13 12:17:22 +02:00
46b3151e37
initial cleanup on the lowest level of serial layer, "system_error" bug is still unknown
2014-09-09 13:55:58 +02:00
a96e804359
removing MSP pass through mode
2014-09-08 17:52:07 +02:00
36bce25ba8
add three.js to libraries
2014-09-05 22:45:08 +02:00
79505e42ed
Show model diagram on motors tab.
...
When testing motors it's more useful to have it present on the motors
tab so you don't have to keep cross-referencing the initial setup tab.
2014-09-04 02:59:31 +01:00
bf13a11dc2
Merge remote-tracking branch 'multiwii/master'
...
Conflicts:
_locales/en/messages.json
changelog.html
js/data_storage.js
js/protocols/stm32.js
manifest.json
tabs/auxiliary_configuration.js
tabs/default.css
tabs/default.html
tabs/firmware_flasher.js
tabs/servos.js
2014-09-04 01:40:24 +01:00
0bd4af89c9
catch lastError cleanly in current context
2014-09-01 14:56:13 +02:00
893671fa2b
check if result exists before comparison
2014-09-01 14:46:46 +02:00
9034a94135
release
2014-08-31 16:52:55 +02:00
b5aeb8df2a
fix typo
2014-08-31 15:55:12 +02:00
37de8dfefa
new simplified flasher status UI
2014-08-30 10:30:28 +02:00
322af92d45
add / implement flash slowly option in firmware flasher
...
this will allow flashing via serial adapters that doesn't support 921600
flashing via various bluetooth adapters will be also possible now
(untested)
2014-08-30 08:59:21 +02:00
6dec7dfbc1
if unexpected data is received, throw an error instead of log, this will also attach a stack trace for easier debugging
2014-08-30 08:35:09 +02:00
37746bf3ed
fix rare condition in which flasher could hang and wont let the user leave
2014-08-30 08:27:24 +02:00
1e681bbdd2
polish variable definitions (only indentation changes)
2014-08-30 08:26:12 +02:00
a710a2fbb1
release
2014-08-24 23:39:20 +01:00
90da15b14c
added time based update reminder (informing people on dev branch and ones with broken chrome auto-update mechanism)
2014-08-24 23:39:19 +01:00
b337359389
fix style
2014-08-24 23:38:43 +01:00
d4f4d619cf
another run on undefined comparators
2014-08-24 23:38:42 +01:00
8dabc3ac91
experimenting with some undefined comparators in strict mode
2014-08-24 23:38:42 +01:00
f1df9ade05
updating analytics
2014-08-24 23:38:42 +01:00
b947bd1188
dumb down port handler implementation
2014-08-24 23:38:42 +01:00
179a3aa643
polish
2014-08-24 23:38:42 +01:00
b77ed6b174
another refactor for global variables, bugfixes for logging tab initialization in strict mode
2014-08-24 23:37:07 +01:00
f3ea5757f7
lots of work on removing global variables
2014-08-24 23:37:07 +01:00
1e0cadc039
recovery bugfix
2014-08-24 23:37:07 +01:00
696e27b503
updating d3 library
2014-08-24 23:37:07 +01:00
a893261e6d
more strict
2014-08-24 23:36:17 +01:00
b78395d639
corrections of inline functions
2014-08-24 23:36:17 +01:00
d9c315338d
turning on strict mode for various js files
2014-08-24 23:36:17 +01:00
6a58fee7c4
stm32/stm32usbdfu parameters rework, removing UI options dependency
2014-08-24 23:32:05 +01:00
078d5b4ad6
move flashing protocols to separate folder
2014-08-24 23:32:05 +01:00
3a7654b433
since erasing only needed pages appears to be working correctly, removing it from experimental
2014-08-24 23:32:04 +01:00
a3995a4694
lower the "contacting bootloader" timeout from buggy 4s to 1s
2014-08-24 23:32:04 +01:00
440d3250f1
release
2014-08-18 19:29:36 +02:00
2a3d261465
added time based update reminder (informing people on dev branch and ones with broken chrome auto-update mechanism)
2014-08-17 13:29:07 +02:00
cc8e53205d
fix style
2014-08-14 17:00:32 +02:00
dbf528345e
another run on undefined comparators
2014-08-14 16:41:49 +02:00
d3d933a704
experimenting with some undefined comparators in strict mode
2014-08-14 16:23:08 +02:00
6138c06fa4
updating analytics
2014-08-14 15:49:26 +02:00
4bd113f28f
dumb down port handler implementation
2014-08-13 13:29:55 +02:00
d36d0af270
polish
2014-08-13 13:12:39 +02:00
e27a194ec7
another refactor for global variables, bugfixes for logging tab initialization in strict mode
2014-08-12 15:51:31 +02:00
ec44b77ff2
lots of work on removing global variables
2014-08-10 06:01:44 +02:00
377853b58a
recovery bugfix
2014-08-10 06:01:21 +02:00
42e25fbb02
updating d3 library
2014-08-09 20:59:15 +02:00
fc0fff017e
more strict
2014-08-09 20:47:07 +02:00
f16b3a479a
corrections of inline functions
2014-08-09 20:40:40 +02:00
36f456d2e7
turning on strict mode for various js files
2014-08-09 19:38:46 +02:00
13d17e1528
stm32/stm32usbdfu parameters rework, removing UI options dependency
2014-07-22 14:16:09 +02:00
93ab8dfba3
move flashing protocols to separate folder
2014-07-22 13:20:26 +02:00
8d67811644
since erasing only needed pages appears to be working correctly, removing it from experimental
2014-07-21 07:21:03 +02:00
b47892eca1
lower the "contacting bootloader" timeout from buggy 4s to 1s
2014-07-21 03:48:35 +02:00
1688b41eb2
Merge remote-tracking branch 'multiwii/master'
...
Conflicts:
changelog.html
main.js
2014-07-20 01:01:25 +01:00
04960012ca
tiny method re-order in serial layer
2014-07-16 14:06:15 +02:00
85bee11712
use analytics exception API to handle/report serial related issues
2014-07-16 13:07:24 +02:00
1885fba5a0
analytics overhaul
2014-07-16 12:59:12 +02:00
8a52551671
request and store MSP_BOXIDS (for reasons unknown at the moment)
2014-07-11 17:52:56 +02:00
930a7f482f
updating libs
2014-07-11 13:26:46 +02:00
75e0accf75
hookup new cleanup system
2014-07-10 18:45:18 +02:00
5efb1685a4
moving default tab to new tabs object
2014-07-10 18:14:17 +02:00
7e67cccf96
adding new tabs object (will contain all tab methods in the future)
2014-07-10 18:13:38 +02:00
aca493301a
simplify some interval cleaning code
2014-07-10 14:48:33 +02:00
3f063f6654
initial stab on preventing tab switch chaining
2014-07-09 16:10:02 +02:00
795502a585
enforce stronger interval cleanup
2014-07-09 15:46:35 +02:00
58f933e92c
Merge remote-tracking branch 'multiwii/master'
...
Conflicts:
_locales/en/messages.json
tabs/auxiliary_configuration.html
tabs/auxiliary_configuration.js
tabs/receiver.css
2014-07-07 19:45:33 +01:00
9c6fdf81c8
Update servos tab to support cleanflight's cleaner implementation of
...
channel forwarding which doesn't re-use 'middle'
This essentially removes the legacy multiwii hack support.
2014-07-06 12:26:41 +01:00
785109e9e2
cleanup all timeouts on disconnect, fixes hanging CLI cleanup on hot-disconnect
2014-07-02 13:55:35 +02:00
a7975883ee
use GUI status instead of UI status
2014-07-02 13:54:48 +02:00
343cb15e61
another experimental fix for serial "system_error"
2014-07-01 12:48:20 +02:00
0baad91237
track bus recovery so it wouldn't fall into infinite loop, experimental fix
2014-07-01 04:13:33 +02:00
f269c8a8b4
serial error events hookup
2014-06-30 02:37:29 +02:00
05dfaf910d
sprinkle in some tracking events for firmware flashing
2014-06-28 21:38:06 +02:00
959edc85e7
onReceiverError handle implementation
2014-06-28 14:25:11 +02:00
e37da07bc8
interval timers bugfixes
2014-06-27 18:19:53 +02:00
f352c4edbe
kill motors on sudden application close
...
#34
2014-06-27 17:31:12 +02:00
f2aa899fe0
polishing firmware flasher UI and messages
2014-06-24 14:57:41 +02:00
86aa6a282c
dangerous things that people want...
2014-06-23 19:50:39 +02:00
bf1c58f1bd
cleanup
2014-06-20 14:42:20 +02:00
61bed4770f
cosmetic change
2014-06-20 14:29:16 +02:00
8273081fdd
moving kinematics data to array
2014-06-20 12:39:42 +02:00
cb5bcf9c0a
initial work on pass through mode for ReadError
2014-06-20 11:07:43 +02:00
f649418fdf
moving CLI vars around
2014-06-20 10:29:01 +02:00
0a2947b1ab
sort out usb api errors in canary
2014-06-16 22:00:08 +02:00
f70b6f64ff
add i2c error counter in status bar
2014-06-16 14:13:30 +02:00
22cc8f0b96
move one comment over to correct block
2014-06-13 21:45:36 +02:00
99c5906a4b
now that's a proper cleanup
2014-06-10 00:19:42 +02:00
c0387850aa
jump to application code routine cleaned up
2014-06-10 00:09:15 +02:00
1fb060e0fa
remove obsolete chunk of code
2014-06-10 00:04:30 +02:00
7d3a29c0b7
clearStatus and loadAddress now return data
2014-06-09 23:49:08 +02:00
e8fa4e1822
documentation and major cleanup for DFU_DNLOAD
2014-06-09 23:29:36 +02:00
623c049b5e
ugly fix for outstanding call error
2014-06-09 17:55:21 +02:00
7bdd43fd1c
make the validation pass on hexes with holes
2014-06-09 17:47:41 +02:00
be9cd9f606
implemented jump into app code
2014-06-09 13:16:58 +02:00
dce248e404
working verify (address jumps not tested)
2014-06-09 13:01:18 +02:00
4425dfb5c3
split write into load address and write routines
2014-06-09 12:46:41 +02:00
4fdbb8468b
working flashing, broken verify
2014-06-08 23:44:06 +02:00
176566f72e
add missing ;
2014-06-08 22:38:58 +02:00
3e30482076
working full chip erase
2014-06-08 22:06:01 +02:00
21b0f447b6
initial work on full erase
2014-06-08 21:33:42 +02:00
12364ec087
implementing first 2 upload procedure methods
2014-06-08 21:15:12 +02:00
92f9b40fc0
implementing openDevice and claimInterface
2014-06-08 20:26:28 +02:00
b5a1015610
DFU detection and port UI DFU option injection
2014-06-08 20:10:07 +02:00
a0582fd79f
adding request usb permissions UI (DEV only)
2014-06-08 19:32:24 +02:00
cda43ac9bf
add additional permissions so we can use USB api
2014-06-08 18:42:31 +02:00
8231c60b3c
initial implementation of control transfer in/out
2014-06-08 17:42:02 +02:00
c4e1cf2600
initial (header) work on STM32DFU
2014-06-08 17:16:44 +02:00
b09620b6ae
remove obsolete needle, cleanup
2014-06-07 17:54:51 +02:00
7e62e98bac
Support AUX1-8 on the 'Auxiliary Configuration' tab.
2014-06-04 19:33:24 +01:00
5abe7473f8
moving send_message routine to MSP object
2014-06-01 14:10:18 +02:00
46cf844e7e
display current draw in A not mA
2014-05-30 01:41:27 +02:00
d68bd29191
initial support for current sensor code from Lux
2014-05-29 20:16:32 +02:00
f7f48c48b4
updating d3
2014-05-19 23:44:47 +02:00
ce0600b940
keep speed indicators on 0 while disconnected
2014-05-15 13:47:05 +02:00
5f07390d45
stuff rcData to array (allocating up to 32 chan)
2014-05-15 13:12:13 +02:00
4edc9771de
dropping in jquery 2.1.1
2014-05-08 15:05:21 +02:00
20e2995fb4
localization can now replace placeholder attr
2014-05-08 11:15:20 +02:00
aaacf6cea8
support global and local chip erase
2014-05-07 08:07:49 +02:00
af15110fa6
handle holes in hex gracefully
2014-05-07 07:55:51 +02:00
eb92009bcb
experimental local erase, needs testing
2014-05-07 05:01:08 +02:00
6a33801463
default tab moved to i18n
2014-05-06 16:45:26 +02:00
245328272c
serial backend now support i18n
2014-05-06 16:30:53 +02:00
e1ceee4fa4
started moving messages to translation system
2014-05-06 16:19:30 +02:00
7e82e96114
add support for MSP_PIDNAMES
2014-05-03 22:42:11 +02:00
854a17e0f2
preparing some stuff for dongs
2014-05-03 01:03:24 +02:00
a6fcdbdecf
updating d3
2014-05-02 17:20:54 +02:00
de26bdb0d0
Use d3 to render the sensors tab
2014-04-13 11:54:35 +02:00
1c7906ad00
updating d3 to version 3.4.5
2014-04-12 19:01:30 +02:00
b14d26d530
initial implementation of request delay balancer
2014-04-12 14:55:20 +02:00
9165fc65de
release
2014-04-11 21:22:05 +02:00
74e9256e75
correcting MSP implementation, optimizations
2014-04-11 15:11:59 +02:00
e0510603d8
info box with voltage & rssi on initial setup
2014-04-03 14:33:30 +02:00
7af2c39aca
moving firmware version info to gui.log
2014-03-30 12:05:18 +02:00
8d6702c15e
lowering MSP_STATUS pull speed to 250ms
2014-03-30 11:51:16 +02:00
13ce2dc11b
polish
2014-03-29 22:27:21 +01:00
614abc9345
adding D3 to libraries
2014-03-29 15:42:12 +01:00
6f1b603d3e
don't save reference to function we dont need
2014-03-29 01:28:27 +01:00
58d43c381b
removal of char_counter, new port_usage, i18n
...
added bitrate to serial object, removed last bits of 'port_handler'
interval code forgotten in the kill routines, new port_usage is now
saved in a separate file
2014-03-29 00:59:39 +01:00
a7fab85d42
updating flotr2, rework of graph pull timers
2014-03-23 18:49:21 +01:00
36a79f8902
simplify
2014-03-20 22:27:53 +01:00
c9d22a9002
initial changes required for i18n system
2014-03-20 22:24:49 +01:00
985d5233a2
resolving callback hell in backup routine
2014-03-20 22:19:27 +01:00
dcdccd683d
detach listeners and remove element data
2014-03-15 15:43:08 +01:00
b11a84217b
performance boost
2014-03-12 00:07:27 +01:00
578937fd2c
remove useless code
2014-03-11 23:23:50 +01:00
30df0d6ec5
polish
2014-03-09 03:14:59 +01:00
ade74446b3
bugfixes
2014-03-09 03:11:11 +01:00
1722ac5c18
updating analytics bundle
2014-03-08 09:24:49 +01:00
9b29f78e3e
whitespace trimming run
2014-03-08 06:25:15 +01:00
0607ccbff4
no need to reverse itter over here
2014-03-07 18:37:21 +01:00
3e969fe08a
more reliable port handler cleanup
2014-03-07 17:44:11 +01:00
dfdddad767
polishing backup object
2014-03-07 17:43:53 +01:00
96d2bdbb12
only enforce mincommand if necessary
2014-03-06 18:52:18 +01:00
7d097a51b6
auto connect bugfixes
2014-03-05 00:45:25 +01:00
2d1099a3a9
rework & tiny optimizations
2014-03-02 18:36:28 +01:00
6e9ac33cba
bugfixes
2014-02-28 20:34:11 +01:00
bf3a6b40b3
callbacks_cleanup bugfix
2014-02-28 17:38:08 +01:00
9a0fbbe96b
initial work on callbacks_cleanup
2014-02-28 15:44:07 +01:00
927589e22f
clear callbacks the smarter way
2014-02-28 14:07:11 +01:00
09a1252410
mostly working flash on connect sequence
2014-02-26 08:10:08 +01:00
0c3374d8a1
add port handler support for non-timeout callbs
2014-02-26 07:23:50 +01:00
d5b64cb291
verify version on connect
2014-02-25 14:37:34 +01:00
ad3382a91f
clean callbacks/timeouts the smart way
2014-02-24 12:44:33 +01:00
4a08e16e5e
port handler improvements
2014-02-24 11:54:54 +01:00
6889c0c800
change motor tab behavior/ui
...
fixes #26
2014-02-22 22:02:07 +01:00
0339f87d86
more robust approach
2014-02-22 21:43:17 +01:00
7d4e7f8310
write to file IO bugfix
2014-02-22 21:23:06 +01:00
23ad4a9426
do things properly not like a troll
2014-02-22 11:19:18 +01:00
d92704c374
.interval_kill_all method enhancements / bugfix
2014-02-22 11:13:37 +01:00
38d6a80ae2
major port handler rework
2014-02-21 21:12:19 +01:00
844121e4bf
implemented new more powerful port handler
2014-02-21 14:47:30 +01:00
e1a15b2bb4
deploying callback/timeout system for all MSP
...
commands, i am currently using static timeout (interval) of 1000ms, this
might be changed in the future
2014-02-20 12:16:00 +01:00
c44f1bb36d
utilize MSP_SET_MOTOR callback (its possible now)
2014-02-20 12:13:33 +01:00
65555b224c
added profile select in PID tab
2014-02-14 15:41:36 +01:00
8e97a68cb1
bumping up bitrate for testing
2014-02-12 10:43:21 +01:00
dc7ac9e242
rename
2014-02-11 11:03:26 +01:00
88ed454169
bugfix / cleanup routine for delayed data
...
requests that could leak into CLI and cause corruption
2014-02-10 16:26:43 +01:00
238f18b5c5
reordering, muting excessive logging
2014-02-09 16:26:18 +01:00
f566596bc7
cleanup
2014-02-09 16:03:42 +01:00
2af2db5808
cleanup
2014-02-09 15:56:06 +01:00
e6a6f0a075
support new ihxer parser (needs cleanup), tested
2014-02-07 22:33:29 +01:00
7bde2a159e
new ihex parser
2014-02-07 21:55:06 +01:00
e2cfa50262
moving workers to js folder
2014-02-07 21:48:04 +01:00
2b416c6821
print udid on connect
2014-02-04 19:16:53 +01:00
a9f73b6384
no more playing nice with official msp
2014-02-04 19:00:53 +01:00
8686a45831
adding more user-notify messages
2014-02-04 18:52:21 +01:00
e3ec48452c
utilize latest changes in serial lib
2014-02-03 10:07:54 +01:00
4b2d5c4a48
upgrading serial lib
2014-02-03 10:02:49 +01:00
9de5cdcf84
extra failsafe to trigger while leaving motor tab
2014-02-03 09:28:10 +01:00
9b63c082d1
more .log hooks
2014-02-03 09:15:13 +01:00
5b130cfc9b
adjusting element sizes due to window size change
...
disabling compass UI
2014-02-03 09:10:13 +01:00
a30569077a
removing obsolete notify, first hooks to GUI.log
2014-02-03 08:45:21 +01:00
2ebd108f43
initial log window implementation
2014-02-03 06:19:06 +01:00
2ce29db887
more dynamic approach to pid parsing
2014-02-02 03:23:44 +01:00
f5113a55e2
implementation for current canary 34
2014-01-31 15:51:47 +01:00
51066a1962
removing 300 baud, STM32 flasher note
2014-01-28 12:21:35 +01:00
6ee1982050
always try to consume all of the data in retrieve
2014-01-28 04:02:47 +01:00
35d66ed4c3
moving MSP related data object to separate file
2014-01-28 01:33:25 +01:00
e5041c233e
adjusting MSP according to the latest bf changes
2014-01-28 01:33:01 +01:00
14d125a4ad
shaving down some delay time
2014-01-28 01:11:37 +01:00
853860b1ad
bugfixes
2014-01-27 23:15:34 +01:00
ee52ab0aaf
had it right the first time
2014-01-27 21:41:32 +01:00
c2a4223868
flashing protocol changes
2014-01-27 21:37:42 +01:00
2402c1b49b
global serial statistics, remove obsolete code
2014-01-27 21:14:49 +01:00
c51e6eb2fb
add function name (listeners readability/clarity)
2014-01-27 01:59:40 +01:00
d2a7b4559b
removing obsolete parameter
2014-01-27 01:52:01 +01:00
c98bdd9f54
traffic tracking inside serial backend
2014-01-27 01:48:34 +01:00
b0c4b1cf1b
wider scope
2014-01-27 00:49:28 +01:00
d258cab005
don't repeat the same code
2014-01-27 00:48:21 +01:00
c389a71ece
adding method to empty send buffer, limits
2014-01-26 21:37:19 +01:00
c7dae0f5e3
speed up
2014-01-26 20:19:47 +01:00
476a04fda3
cleanup on disconnect
2014-01-26 20:14:21 +01:00
e907531114
internal serial output buffer
2014-01-26 20:01:46 +01:00
cbf4db1efe
debug message for timed out MSP commands
2014-01-26 20:01:18 +01:00
2579b7d394
MSP - on fail retry codes that requested callback
...
#close 11
2014-01-26 18:46:36 +01:00
21af65567c
created MSP disconnect cleanup routine
2014-01-26 18:24:46 +01:00
384502eb3a
rename
2014-01-26 15:20:38 +01:00
5040bca974
fix mag scale factor
2014-01-26 00:59:01 +01:00
8c95ee1ca7
changing scale factors
2014-01-26 00:30:07 +01:00
aa49e8c375
different approach to serial API logging
2014-01-25 13:48:31 +01:00
7edc3605e5
updating jquery to 2.1.0
2014-01-24 21:45:59 +01:00
bb7bedaf14
log baud speed on port.connect
2014-01-23 00:36:36 +01:00
39075c06ab
drop junk in input buffer before entering CLI
...
this could use some polishing but i think it will do for now
close #21
2014-01-22 20:51:12 +01:00
c0937ddbd4
splitting MSP and CLI integration, new serial api
2014-01-22 20:35:37 +01:00
a004eeecae
updating stm32 flashing speeds
2014-01-21 14:40:22 +01:00
763696b380
changing flasher speeds
2014-01-21 14:20:31 +01:00
cdad9db791
updating analytics bundle
2014-01-19 01:03:11 +01:00
f13f07942e
bugfix
2014-01-18 19:20:34 +01:00
e27f8019d7
cleanup & improvements, callback approach
2014-01-18 12:55:09 +01:00
643a894730
working firmware flasher
2014-01-18 12:44:51 +01:00
cTn
Dominic Clifton
Tobias Raeder
Lukas S