dcdc15c5e3
Added Dynamic Lpf Dterm Curve Expo to UI
2020-06-17 21:22:18 +02:00
16b0cfc051
Fixed the antigravity feature switch.
2020-06-01 21:05:29 +12:00
6b2c59b571
[OSD] Add support for FrSky OSD
...
Add peripheral bit definitions to check the port function mask.
Depends on #1851
Depends on #1852
2020-05-25 14:53:17 +01:00
cc6769b065
Change magyar (Hungarian) to uppercase
2020-05-20 17:55:10 +02:00
c1395c004f
Changed frame title & brackets
2020-05-09 12:35:05 +01:00
325f6170ed
Update motor limit frame messages
...
Replaced references to 'Attenuation' and 'Limit' with 'Scaling'
2020-05-07 14:03:10 +01:00
0d5519a3d6
Updated D_min tooltip
2020-05-06 08:24:21 +02:00
8fd1c11ac3
Merge pull request #1997 from mikeller/remove_mag_declination
2020-05-04 01:02:43 +12:00
59cb2d29a0
Removed unused compass declination setting.
2020-05-02 23:16:06 +12:00
03fb93cb3e
order and description changed
2020-04-29 16:21:31 +02:00
e78ea1e0b6
missing tooltip added
2020-04-29 15:52:59 +02:00
d176724718
Merge pull request #1984 from mikeller/fix_dynamic_idle_rpm_units
2020-04-29 00:18:09 +12:00
267e4973cd
Add Traditional Chinese translation
2020-04-28 08:37:43 +02:00
0fcf3564c2
Add Hungarian translation
2020-04-27 15:17:50 +02:00
04054c3b41
Fixed units shown for dynamic idle.
2020-04-27 01:50:21 +12:00
aa98588379
Merge pull request #1976 from leocb/patch-2
2020-04-25 12:24:55 +12:00
466d504fcf
Improve pidTuningIdleMinRpmHelp Tooltip text
...
This phrase is more concise, direct to the point and uses less technical jargon that's better for the end-user that soes not care to what happens under the hood. Please correct me if I defined something wrong.
escaped double quotes chars
better IdleMinRPM tooltip
Thanks to ctzsnooze
Added wiki entry for Dynamic Idle
2020-04-23 05:42:15 -03:00
520a802844
better clarification on what motor limit is intended for
2020-04-21 22:00:20 -03:00
f7dd89a2d6
update motor limit tooltip example phrasing, add warning
2020-04-20 22:37:23 -03:00
bdf142962b
Fix Motor Limit Tooltip Examples
...
Battery types were inverted on the example for the Motor Limit feature tooltip
2020-04-20 22:28:39 -03:00
3b2d7a837d
PD Ratio Slider now adjusts D, fixes yaw P issue, tooltip update
...
Makes for more logical P:D ratio changes; fix P first, then tune D.
Also fixes issue with P:D ratio slider changing P on pitch and roll, but not yaw.
Allows increasing yaw P default to 45
Update tooltip message to suit change.
2020-04-20 22:49:51 +12:00
415d7fb841
Merge pull request #1962 from ctzsnooze/update-bidir-messages
...
update Bidirectional DShot messages
2020-04-20 22:47:26 +12:00
65d378639d
Fix the landing page - again. And fix the tabs broken in the last fix.
2020-04-20 21:33:07 +12:00
3348457e45
Updated link for new translators to point to the instructions in the Betaflight README.
2020-04-18 20:34:44 +12:00
c5158e1585
update Bidirectional DShot messages
2020-04-12 20:00:21 +10:00
eb6e269467
Added warning when connecting to firmware newer than configurator.
2020-04-12 17:37:09 +12:00
9908865b2c
Fixed the styling of the landing page.
2020-04-11 17:49:03 +12:00
69ab24e0f3
Merge pull request #1952 from Asizon/derivateToDMax
...
Renamed Derivative to DMax when using Dmin
2020-04-11 13:15:15 +12:00
efe82eccc7
Merge pull request #1933 from mikeller/support_disabled_motor_protocol
...
Added support for disabling the motor output protocol.
2020-04-11 12:41:50 +12:00
9f65a1088c
Derivate to DMax using Dmin
2020-04-08 10:54:23 +02:00
26c4b09015
Updating tooltips
2020-04-05 08:50:05 +02:00
153fa2b486
Added version information to Unified Targets when they are flashed.
2020-04-02 01:14:44 +13:00
ebd36055da
Added support for disabling the motor output protocol.
2020-04-01 02:00:08 +13:00
687ff4ccc9
added descriptions
2020-03-23 09:55:18 +01:00
ad91e65699
add i18n
2020-03-23 09:27:55 +01:00
43fe183d1d
Merge pull request #1927 from Asizon/osdChipDetectWarning
...
Improving osd chip detection warnings
2020-03-22 11:22:54 +13:00
aed5508669
Rename Efficiency to 'Battery efficiency' so it's grouped with other related elements in list
2020-03-21 00:17:27 -07:00
05a55c5b42
Improving osd detection warnings
2020-03-20 15:57:00 +01:00
c7894fc3d7
Merge pull request #1923 from mikeller/add_unstable_flashing_warning
...
Added warning when flashing unstable firmware.
2020-03-21 01:13:40 +13:00
7ef3fa6a2c
Add OSD_EFFICIENCY element to configurator
2020-03-19 09:59:00 -07:00
c8ee46f45c
Added warning when flashing unstable firmware.
2020-03-19 13:56:44 +13:00
b956ce2162
Remove "Return to saved values" button
2020-03-15 14:18:35 +01:00
99cecfdba8
Update KISS logo
...
Thanks Paul!
Don't try to open modal if already open
Don't assign button if modal already open
Changed rates type change warning
Max rate independent from deadband
New actual rates logo
Thanks to @Asizon and @igormedrano
2020-03-14 00:30:21 +01:00
70a8364e5c
Add rates type
...
Add rates type selection with working graphs and max angular speed
Fix deadband
MSP changes and fix actual rates limit
Small style changes and fixes
Fixes
Fixed the code pointed out in the review
Various sonar fixes
Updated the values of actual rates setting
Reduced logo size
Added analytics to rates type
Minor fix + rounding by step value
Now the calculation of the angle rate takes into account the values rounded by the step value (especially visible with values that are in deg/s)
Various fixes
Angle rate calculation in different functions
Fix for value step validation
Sonar fixes (mostly variables)
Force refresh to prevent errors ...
... when changing rates type after saving to eeprom
Logos refinement + minor changes
Touch to trigger travis
Fix Raceflight rate
2020-03-10 12:51:00 +01:00
94bd817aff
Merge pull request #1905 from Asizon/dynamicIdle
...
Dynamic Idle configurable
2020-03-06 08:23:12 +13:00
5ad9153a52
fix json
2020-03-05 17:38:55 +01:00
b7f9f2d8c0
Moved to Pid Tuning tab
2020-03-05 17:33:38 +01:00
8607d8293d
Merge pull request #1903 from mikeller/show_acc_calibration_warning
...
Show warning on connect when ACC is not calibrated.
2020-03-05 09:28:29 +13:00
bfc83238c4
Show warning on connect when ACC is not calibrated.
2020-03-05 00:35:18 +13:00
6aaababb1d
Adding Dynamic Idle
2020-03-04 10:36:32 +01:00
7e9cebfbf3
Adding Motor Output Limit and cellcount
...
Fix cell count min
Move tootltip`icons
Cosmetic changes
2020-03-03 01:34:08 +13:00
f4f6da02c6
Merge pull request #1891 from Asizon/maxRateWarning
...
High rates warning message to prevent desyncs
2020-02-28 10:06:17 +13:00
3c3ce71d8e
Merge pull request #1887 from mikeller/hide_factory_band
...
Hide the 'factory band' VTX table setting for VTX types that do not support it.
2020-02-23 10:48:57 +13:00
241f1addae
Added warning if factory bands selected in unsupported configuration.
2020-02-23 01:42:39 +13:00
036ef86a90
Warning message for high rates
...
sonar
Move to variable
sonar issues
2020-02-22 11:13:16 +01:00
d96b2319fa
Merge pull request #1883 from Asizon/itermRelaxCutoff
...
Iterm Relax Cutoff Update
2020-02-21 20:09:58 +13:00
d3afbfef75
Add Polish translation
2020-02-19 19:09:44 +01:00
32665bbd45
Add dedicated Helpicon for Cutoff
2020-02-17 12:03:46 +01:00
6ba32b94fc
ItermCutoff and tooltip
2020-02-16 12:46:09 +01:00
44cb725932
Merge pull request #1880 from rvdveen/low-capacity-warning
...
Add support for the 'mah capacity exceeded' osd warning
2020-02-15 23:41:52 +13:00
eb8a50016f
Add support for the 'mah capacity exceeded' osd warning
2020-02-15 10:22:49 +01:00
6e2682ea43
Add OSD Camera Frame element
2020-02-11 15:21:46 +01:00
682472e1b0
Merge pull request #1873 from mikeller/add_bind_button
...
Added bind button for receivers that support it.
2020-02-08 20:47:37 +13:00
0a92e90427
Added message to acknowledge binding.
2020-02-08 19:19:39 +13:00
719491635e
Merge pull request #1872 from etracer65/rename_acc_calib_arming_disabled
...
Rename ACC_CALIB arming disabled message to NO_ACC_CAL
2020-02-08 14:55:59 +13:00
abb3429b96
Merge pull request #1869 from Asizon/DynamicNotchMaxHz
...
Coordination with new Dynamic Notch improvements
2020-02-07 09:51:40 +13:00
e3041286a3
Add Dynamic Notch Max Hz
...
Remove white spaces
Remove white space2
Revert and add suggested changes
Some cosmetic changes
MinHz Changes
Fix MinHz Max
2020-02-06 09:27:44 +01:00
7881bd3673
Remove 32k notice
2020-02-06 09:09:56 +01:00
c2575935fc
Added bind button for receivers that support it.
2020-02-06 15:41:47 +13:00
01e35c2ecb
Rename ACC_CALIB arming disabled message to NO_ACC_CAL
2020-02-05 18:07:15 -05:00
9394d5901c
Work with gyro native sampling
2020-02-04 16:42:39 +01:00
d293d6b1e7
Added button to exit DFU.
2020-01-26 22:59:54 +13:00
5335d64def
Add custom fallback for Portuguese and Portuguese Brazilian
2019-12-28 15:03:13 +01:00
eab38147cd
Fixed URL for CP210x driver.
2019-12-26 13:54:46 +13:00
f3cefcef81
Add support for "Auto" RC Smoothing derivative type
2019-11-30 19:03:35 -05:00
2a79f7e612
Adds RC Channels element to the OSD
2019-11-13 08:53:37 +01:00
53fb5944d1
Add more parameters to GPS Rescue ( #1812 )
...
Add more parameters to GPS Rescue
2019-11-10 11:32:31 +13:00
1672a44dc2
Add more parameters to GPS Rescue
2019-11-08 08:45:17 +01:00
ce044622a2
Add Galileo and Home Point once to GPS
2019-11-06 19:25:56 +01:00
6f6f4738c4
Add tooltip and info for save lua button.
2019-10-28 21:11:00 +00:00
fe0cd8b910
Save vtx_table lua file.
2019-10-23 13:44:04 +01:00
218dc67231
Change "OpenLog" to "OpenLager" ( #1761 )
...
Change "OpenLog" to "OpenLager"
2019-10-23 13:20:32 +13:00
419ead452e
Add support for ACC_CALIB arming disabled flag ( #1739 )
...
Add support for ACC_CALIB arming disabled flag
2019-10-22 23:00:44 +13:00
ed8d2a79a9
Change OpenLog to OpenLager
...
OpenLog became not suitable for serial port logging as of 4.0.x.
2019-10-21 22:47:51 +09:00
8dc4e7829f
Add Basque translation
2019-10-20 17:33:04 +02:00
c6eaefd1b9
Add support for ACC_CALIB arming disabled flag
2019-10-12 19:15:51 -04:00
7ea8068b69
Fix small typos in English locale
2019-10-11 13:32:27 +03:00
8ebed0a53a
Add missing support for DSHOT_BBANG arming disabled flag
2019-10-10 21:10:22 -04:00
5655f099f9
Added introduction to Unified Targets.
2019-10-09 01:42:02 +13:00
71e538379a
Don't accept fancy lookin letters in Unified configs ( #1693 )
...
Don't accept fancy lookin letters in Unified configs
2019-09-29 19:24:23 +13:00
7133001fa2
revise limit to 255, and handle comments
2019-09-29 06:13:25 +00:00
f0a7462139
Fixed naming of the 'Altitude' graph in the sensors tab. ( #1690 )
...
Fixed naming of the 'Altitude' graph in the sensors tab.
2019-09-29 16:43:11 +13:00
0778587fcb
Fixed naming of the 'Altitude' graph in the sensors tab.
2019-09-29 15:58:00 +13:00
261ebd7bbe
Added support for Unified Target configurations with manufacturer_id in the name.
2019-09-27 15:48:03 +12:00
96619a4b58
Don't accept fancy lookin letters.
...
Backstory, Unified configs mean we can embed arbitrary text into the firmware, what is one source of text? Project Gutenberg!
I tried attaching a snippet of the text into the config (as comments, I am a careful deviant) and ended up learning a little about how text is encoded and handled these days.
Given a character with a value higher than 1 byte, the value gets cropped off, so 0x2018 would get flashed as 0x18, and would fail validation, because we'd be checking 0x2018 against 0x18
Asking Notepad++ to convert the document to ANSI was no good either, it decided to use Code page 1252, which still has fancy quotes, and when loaded into the configurator, instead of 0x92, it'd be converted to a replacement character FFFD if you want to look something up.
2019-09-26 22:06:47 +00:00
074bb46f78
Fix esc protocol tooltip for removed dshot1200 ( #1689 )
...
Fix esc protocol tooltip for removed dshot1200
2019-09-26 22:35:33 +12:00
f397cbcd2d
Fix forced dark mode if dark mode on OS level
2019-09-25 13:44:46 +02:00
9a74087762
Fix esc protocol tooltip for removed dshot1200
2019-09-24 20:33:10 +02:00
fa0325c1c7
Added analytics for battery calibration.
2019-09-16 21:13:35 +12:00
005868bc07
Added analytics for new configurator elements.
2019-09-15 22:15:25 +12:00
93e4cf83b8
Added dialog to offer resetting to custom defaults. ( #1651 )
...
Added dialog to offer resetting to custom defaults.
2019-09-15 10:23:32 +12:00
6999656097
Added dialog to offer resetting to custom defaults.
2019-09-15 00:54:39 +12:00
dde266a4de
Add paste from clipboard option to VTX tab ( #1650 )
...
Add paste from clipboard option to VTX tab
2019-09-15 00:43:30 +12:00
8b7f0353e5
Tuning sliders non expert mode limits
2019-09-13 01:46:47 +02:00
14034d129f
Improve filter tuning tip ( #1646 )
...
Improve filter tuning tip
2019-09-13 07:55:21 +12:00
abb9997d1d
Add paste from clipboard option to VTX tab
2019-09-12 15:41:43 +02:00
e1f6cb2be1
Add detailed instructions to the VTX Table ( #1644 )
...
Add detailed instructions to the VTX Table
2019-09-12 07:44:46 +12:00
02a6610a99
Improve filter tuning tip
2019-09-11 10:04:36 +02:00
62a0ba51a9
Further work: consider versions for unified targets ( #1626 )
...
Further work: consider versions for unified targets
2019-09-11 19:12:19 +12:00
000e537283
Finish up work on unified targets
2019-09-10 22:32:04 +00:00
d35b41cfe0
Add detailed instructions to the VTX Table
2019-09-10 20:02:50 +02:00
d54b9d1045
Reorder and make more consistent the Motor/ESC Configuration box
2019-09-10 22:24:11 +12:00
25fe13be25
Add RPM filter configuration
2019-09-07 15:35:45 +02:00
35dd326778
Add tuning sliders
2019-09-07 13:00:39 +02:00
9f63b994b9
Merge pull request #1616 from etracer65/mode_show_arming_disabled
...
Add visual indicator on ARM mode when arming is disabled by the firmware
2019-09-07 12:30:18 +12:00
2ba51a8019
Merge pull request #1615 from IvoFPV/vtx-warning
...
Add warning if Smartaudio port assigned and VTX table not set up
2019-09-07 12:30:03 +12:00
f7275c25f3
translate the (Legacy) bit, and only show it where needed
2019-09-05 04:15:22 +00:00
d6a86dd3c3
Add visual indicator on mode when arming is disabled
...
If arming is disabled (at the firmware level) but the channel is withing the arming mode activation range, display the mode in red to indicate arming not available.
2019-09-04 07:44:25 -04:00
ca6b1f4e0e
Add save/load buttons for the VTX Table
2019-09-04 12:03:00 +02:00
5b7d9bfa52
Add warning if SA port assigned and no Vtx Table
2019-09-03 19:35:08 +02:00
19106ae6cb
Merge pull request #1602 from McGiverGim/add_telem_info_motors
...
Add telemetry dshot data info to the motors tab
2019-08-30 01:19:01 +12:00
b065c8f4f7
Add telemetry dshot data info to the motors tab
2019-08-28 11:50:47 +02:00
a1349e6ac5
Merge pull request #1599 from IvoFPV/add-auto-smoothness-to-ui
...
Add rc smoothing auto smoothness to UI, fix refresh button and slowdown
2019-08-28 17:21:53 +12:00
67e11bb6e0
Fixed typo on vtxTablePowerLevelsTableHelp
...
County -> Country
2019-08-27 08:38:07 -03:00
759265cf8f
Fixed structure of VTX tab Introduction string
...
From:
You can configure here the values for your Video *Trasmitter* (VTX). You can consult and configure the values of the transmission including the VTX Tables if the flight controller and the VTX support it
To:
Here you can configure the values for your Video Transmitter (VTX). You can view and change the transmission values, including the VTX Tables, if the flight controller and VTX support it
2019-08-26 16:54:20 -03:00
70464f5ff2
Add rcsmoothing auto smoothness to UI
2019-08-25 20:06:09 +02:00
e3e79f6e81
Merge pull request #1584 from IvoFPV/piduiov2
...
Improve PID Tuning tab style and layout
2019-08-25 13:44:10 +12:00
4c0e9f06e5
Replace legacy firmware reboot sequence with MSP based sequence.
...
This allows two things:
1. good user experience when flashing devices that use FLASH
bootloaders. previously users would have to use `bl flash` or enter
flash bootloader manually.
2. arbitrary setting of cli reboot character without breaking ability to
reboot flash via configurator.
Squashed commits:
* Extract MSPConnector from code in stm32.js to allow reuse.
* Use reboot_baud when connecting via MSP.
* Ensure GUI connect is unlocked after connect failures.
* Support legacy reboot method for old firmware.
* Don't treat MSPConnector as a singleton.
* Fix `port` usage in handlers.
* Add short delay after closing serial port before re-opening it again.
2019-08-24 22:11:35 +02:00
61d0b1e857
Dmin set per default ratio
2019-08-24 09:57:35 +02:00
72b00c1d91
Add dmin note, remove spacer on wrap
2019-08-24 09:21:51 +02:00
0c267265d4
Clean up css
2019-08-23 17:20:45 +02:00
b3a5865a65
Fix messages
2019-08-22 14:05:04 +02:00
39a81a0728
Improve pid tuning tab style and layout
2019-08-22 12:17:22 +02:00
bb67dbbd72
Merge pull request #1569 from McGiverGim/add_vtx_tab
...
Add an VTX tab
2019-08-20 23:37:09 +12:00
0817e7d9e6
Add an VTX tab
2019-08-20 13:23:10 +02:00
541074238c
Add debug modes to blackbox tab ( #1566 )
...
Add debug modes to blackbox tab
2019-08-15 12:47:53 +12:00
bac0417975
Merge pull request #1567 from IvoFPV/adddynnotchtoui
...
Add dynamic notch settings to UI
2019-08-13 00:07:13 +12:00
2c42243bfb
Add unknown i18n
2019-08-12 09:04:12 +02:00
ec838fcd5a
Fix translations
2019-08-11 17:01:55 +02:00
7189363f98
Initial support for flashing EXST .hex files to External Flash. ( #1565 )
...
Initial support for flashing EXST .hex files to External Flash.
2019-08-12 02:41:31 +12:00
dcfb587302
Change notice and add api version check
2019-08-11 11:40:40 +02:00
065d7176f3
Add dynamic notch disabled warning
2019-08-11 11:09:50 +02:00
c2bae18846
Add debug modes to blackbox tab
2019-08-11 00:16:06 +02:00
b39f7df5f7
Add dyn notch to UI try2
2019-08-10 14:48:30 +02:00
7e371ee49e
switch languages without an app restart ( #1555 )
...
switch languages without an app restart
2019-08-10 18:16:40 +12:00
ea1aaf7e8a
switch languages without an app restart
2019-08-10 00:04:46 +00:00
5cd4b2ff0e
Display error to user when HEX file is invalid.
...
In this case, it's invalid if the HEX file doesn't contain any data in
the address range of the chip to flash.
2019-08-09 13:15:57 +02:00
1fb5c046f4
Add iterm relax cutoff to UI
2019-08-08 00:23:48 +02:00
6c6252547c
patreon link shouldn't open in the main window
2019-07-28 08:42:10 +00:00
e1af1fbd52
add a default handler for serial errors (disconnect) ( #1522 )
...
add a default handler for serial errors (disconnect)
2019-07-09 07:57:28 +12:00
85b48b7ac4
log certain errors to the GUI's log to help with noticing hardware issues
2019-07-08 00:58:32 +00:00
7e8b5e3444
Change the description of the initialSetupArmingDisableFlagsTooltip items to be more clear
2019-07-04 23:41:30 +00:00
bc1c4f4fa5
Adding a hint to SERVO_TILT feature to mention CAMSTAB mode ( #1521 )
...
Adding a hint to SERVO_TILT feature to mention CAMSTAB mode
2019-07-04 09:13:14 +12:00
0318446686
Adding a hint to SERVO_TILT feature to mention that it goes well with CAMSTAB
2019-07-02 22:59:33 +00:00
8043912133
Add Calibration Manager title to i18n ( #1514 )
...
Add Calibration Manager title to i18n
2019-07-02 23:47:32 +12:00
a5d1af7ae2
Add Calibration Manager title to i18n
2019-07-01 10:17:32 +02:00
647859e9e3
End i18n work of OSD statistics
2019-06-30 11:58:40 +02:00
fa79242355
Add unknown statistics fields to OSD ( #1507 )
...
Add unknown statistics fields to OSD
2019-06-30 13:53:21 +12:00
a546e23be8
i18n final statistics from OSD ( #1499 )
...
i18n final statistics from OSD
2019-06-30 13:02:45 +12:00
555f3723e2
Add unknown statistics fields to OSD
2019-06-30 12:57:47 +12:00
95d1a7abfe
Add minimum RSSI dBm OSD statistic
2019-06-28 08:45:21 +02:00
26a0a50d2a
Add switchable dark mode ( #1473 )
...
Add switchable dark mode
2019-06-24 23:19:44 +12:00
5a5715fa7f
Add switchable dark mode
2019-06-23 12:53:04 +02:00
2d5263996c
i18n final statistics from OSD
2019-06-17 15:00:36 +02:00
7f452d9c96
i18n the OSD warnings list, ordering it in alphabetical order ( #1497 )
...
i18n the OSD warnings list, ordering it in alphabetical order
2019-06-18 00:13:54 +12:00
3ced412517
i18n some static options from the OSD ( #1496 )
...
i18n some static options from the OSD
2019-06-18 00:13:45 +12:00
8d714f87a8
i18n the OSD warnings list, ordering it in alphabetical order
2019-06-15 09:15:21 +02:00
e1896a3c2d
i18n some static options from the OSD
2019-06-15 08:18:18 +02:00
c28f285dd7
Add RSSI dBm warning to the OSD
2019-06-14 08:30:17 +02:00
ce9eb57b6c
Add RSSI dBm value to the OSD
2019-06-13 15:53:43 +02:00
20d6335390
i18n OSD Elements ( #1487 )
...
i18n OSD Elements
2019-06-13 23:48:12 +12:00
095c98e838
Renamed some OSD elements to group them in the list
2019-06-12 13:58:38 +02:00
6a341ac6e4
i18n OSD Elements
2019-06-12 12:25:09 +02:00
3e1f961deb
Re-added adjustment slots help.
2019-06-10 23:54:04 +12:00
640286f680
Updated adjustment range examples.
2019-06-10 22:05:30 +12:00
de6455d70b
Added I18n strings for RPMFILTER and REBOOT_REQD flags from #1448
2019-06-06 17:54:19 +00:00
04d6167e87
Remove the OSD preview logo switch ( #1465 )
...
Remove the OSD preview logo switch
2019-05-30 00:50:06 +12:00
56e2ce600f
Add voltage and amperage scale calibration ( #1439 )
...
Add voltage and amperage scale calibration
2019-05-28 21:19:29 +12:00
b7f9ac0fdd
Add voltage and amperage scale calibration manager
2019-05-27 16:08:55 +02:00
c284b5fda7
Remove the OSD preview logo switch
2019-05-27 15:22:00 +02:00
bf4ab47191
Add tooltips for PID and RATE profiles names OSD elements ( #1454 )
...
Add tooltips for PID and RATE profiles names OSD elements
2019-05-25 12:32:26 +12:00
4e4f9e98c3
Add OSD profile names
2019-05-22 19:53:09 +10:00
9de0b6ed6f
Add tooltips for PID and RATE profiles names OSD elements
2019-05-21 16:35:27 +02:00
451e4d6bb8
Add a select font preview in OSD
2019-05-21 15:16:10 +02:00
190c8a8f5a
User friendly messages for #1431 ( #1438 )
...
User friendly messages for #1431
2019-05-18 19:13:06 +12:00
68a311230b
Move flash progress to toolbar ( #1437 )
...
Move flash progress to toolbar
2019-05-18 19:05:05 +12:00
4635007da8
User friendly messages for #1431
2019-05-17 22:10:10 -03:00
868c25500f
Update OSD Note message, about preview look and older firmware ( #1435 )
...
Update OSD Note message, about preview look and older firmware
2019-05-17 00:08:48 +12:00
057185aead
Move flash progress to toolbar
2019-05-16 09:07:12 +02:00
b6e5fcc891
Fixed wording in 32 kHz gyro sampling discontinuation message. ( #1433 )
...
Fixed wording in 32 kHz gyro sampling discontinuation message.
2019-05-15 01:15:51 +12:00
263cd58f13
Update OSD Note message, about preview look and older firmware
2019-05-14 13:51:23 +02:00
51c38e478c
Make fonts available for older versions ( #1431 )
...
Make fonts available for older versions
2019-05-14 22:40:12 +12:00
02afabf320
Make fonts available for older versions
...
All of the changes to the fonts have been backwards compatible, except for the recent move of crosshair
I've just taken the latest font files, and copied
0x7B to 0x26
0x7D to 0x27
2019-05-13 21:08:14 +00:00
9188f1e822
Fixed wording in 32 kHz gyro sampling discontinuation message.
2019-05-12 23:24:27 +12:00
7a815853f1
New crash flag in 4.1 jostles the disarm flags
2019-05-11 01:17:23 +00:00
d5be995459
Add Croatian translation
2019-05-01 15:46:28 +02:00
f1b9055310
Add Galician translation ( #1407 )
...
Add Galician translation
2019-05-01 00:22:43 +12:00
58373666cb
add CLI snippet preview dialog
2019-04-29 10:27:37 +02:00
3560d7b716
add button to CLI for loading commands from file
2019-04-29 10:27:37 +02:00
dd22b21828
Add Galician translation
2019-04-29 08:18:34 +02:00
faf78105b4
Merge pull request #1390 from krzysztofmatula/km-odometer-stats
...
OSD: allow configuring post flight odometer stats
2019-04-17 06:24:33 +12:00
c68ec0b67f
Merge pull request #1384 from ianrmurphy/add-rssi-lq-osd-warnings
...
Added support for RSSI & Link Quality warning settings
2019-04-17 05:49:36 +12:00
40965d4ab1
OSD: allow configuring post flight odometer stats
2019-04-15 21:07:37 +02:00
7366b00292
Reinstate warning support.
2019-04-15 15:13:24 +01:00
9acd560c78
Undo MSP API changes.
2019-04-15 13:24:36 +01:00
f96fc0eec3
CLI Client-side Autocomplete
...
Executes silently various commands on CLI open. Parses the output
and build autocomplete cache. Autcomplete hints are displayed in
popup lists.
2019-04-15 14:45:53 +03:00
9463e08f10
Added support for RSSI & Link Quality warning settings & Link Quality alarm setting.
2019-04-14 12:18:22 +01:00
c3f64107b4
Merge pull request #1350 from McGiverGim/fix_itermrelax_tooltip
...
Fix Absolute Control tooltip.
2019-04-09 19:49:58 +12:00
eaa1c05b78
Merge pull request #1348 from mikeller/fix_filter_settings
...
Fixed lowpass filter settings.
2019-04-09 10:37:20 +12:00
e9d83f62a2
Fixed lowpass filter settings.
2019-04-09 06:33:48 +12:00
36b87662a9
Fix Absolute Control tooltip.
2019-04-08 14:05:33 +02:00
0cf78ce1de
Merge pull request #1347 from mikeller/add_cli_battery_warning
...
Added warning to disconnect battery when entering commands in CLI.
2019-04-08 22:51:53 +12:00
14167c6c72
Show/Hide gyro elements by detection
2019-04-08 08:42:45 +02:00
a5d3e43b06
Added warning to disconnect battery when entering commands in CLI.
2019-04-07 21:37:41 +12:00
e322ef0795
MSP Multiple GYRO/ACC alignment support
...
* Make use of 1.41.0 MSP API changes introduced
https://github.com/betaflight/betaflight/pull/7506
* Not really happy with the elements/css, but opening this up for feedback. I
can't quite get the select inputs or the text/icons to go where I want :p
2019-04-02 20:03:15 +13:00
e7798344d8
show successful clipboard copy on the button
2019-03-25 11:10:57 +01:00
4bb9d30d05
use standard Clipboard API when available
2019-03-24 15:29:36 +01:00
eb899ddf21
add button to copy CLI contents to clipboard
2019-03-24 15:29:36 +01:00
9e3f2791b9
Merge pull request #1315 from dronejunkie/rpm-osd
...
Adding rpm freq osd element and new format for rpm.
2019-03-17 10:22:35 +13:00
b390a48d04
Added rpm freq osd element and new rpm osd layout. Added new element type, which is an array of string.
2019-03-16 23:13:25 +11:00
0d648a1a86
Added note and link to Patreon.
2019-03-16 23:25:32 +13:00
5a5e87a2a0
Add integrated yaw to the Configurator
2019-03-14 11:46:59 +01:00
bad5b7c627
Add D Min feature to PIDs tab
2019-03-12 13:56:29 +01:00
da6bc2e5aa
Merge pull request #1317 from leocb/Fix-Display-name-description-string
...
Update Display name description string to "as set by the cli command"
2019-03-12 00:28:30 +13:00
b4869a9431
Merge pull request #1300 from ghostface/runcam_caddx_rename
...
Rename runcam device option to include caddx
2019-03-11 23:27:13 +13:00
2921e1c7ee
rename runcam device to camera device (Runcam protocl) to make non exclusive support for other cameras clear.
...
align smartaudio and tramp labels to include vtx and protocol in parentheses.
2019-03-10 22:40:18 +01:00
794bad5803
Revert "Rename runcam device option to include caddx"
...
This reverts commit 328062faa6
2019-03-10 22:37:33 +01:00
4611e71c69
Display name string to "as set by the cli command"
2019-03-10 08:49:27 -03:00
9f2e608530
Add dynamic lpf and dterm filters
2019-03-08 08:25:23 +01:00
5de1b703aa
Merge pull request #1287 from dthubereng/add_mode_logic_to_msp
...
Add modeLogic and mode link UI support
2019-03-03 12:40:00 +13:00
ff95818bc3
Update help for new mode logic
2019-02-28 20:21:29 -06:00
a3b173a050
Updated help text for modes
2019-02-23 23:51:14 -06:00
328062faa6
Rename runcam device option to include caddx
...
Caddx updated their firmware to support runcams protocol.
Changing the option will make it more clear to the enduser what to select.
2019-02-17 23:38:10 +01:00
3216fcadd6
update mode tab help text
2019-02-17 12:38:16 -06:00
7037329f73
Add mixing links and ranges within a mode
2019-02-17 01:24:41 -06:00
3144767f47
Added note.
2019-02-13 02:26:10 +13:00
d86bb0d41e
Changed it to use a tooltip. God I hate CSS.
2019-02-12 00:48:12 +13:00
a2c2b82806
Added deprecation warning for dataflash saving.
2019-02-10 12:19:21 +13:00
5b8e38c216
Add MSP_MODE_RANGES_EXTRA
...
Add MSP_MODE_RANGES_EXTRA to msp codes.
Add MODE_RANGES_EXTRA function call.
Add modeRangeExtra when reading mode settings.
Add UI for modeLogic.
Position and populate Logic selector.
Some fixes for msp apiVersion checking.
Add 'save' modeLogic.
Add link button and translations.
Add code to show/hide Link button.
Adjust position of link and range buttons.
Add structure code for Link button.
Add linkedTo code.
Add link div with delete button to html and css.
Add code to hide/show buttons when link is pressed.
Add code to add link select to range area.
Add save code for linked modes.
Add formatting to link.
Don't allow linking to/from ARM or self.
Remove unnecessary styling.
Update reading MODE_RANGES_EXTRA array length.
Set defaults for '_EXTRA' to aux tab.
2019-02-07 11:23:07 -06:00
43bb0e42b5
Merge pull request #1286 from McGiverGim/add_osd_profiles
...
Add osd profiles
2019-02-06 09:47:35 +13:00
545c9ad786
Add OSD profiles configuration
2019-02-05 10:34:32 +01:00
ab83c79315
Add display name to config, backup/restore and OSD
2019-02-01 01:36:51 +13:00
5f984ad382
Added OSD preview elements for stick overlays.
2019-01-27 14:39:00 +13:00
4c5dfe7f8e
Merge pull request #1275 from McGiverGim/disarm_flags_text
...
Arming disabled flags into text
2019-01-25 09:23:28 +13:00
7843de252c
Merge pull request #1283 from etracer65/add_osd_profile_adjustment
...
Add support for OSD Profile and LED Profile in-flight adjustments
2019-01-24 19:07:09 +13:00
2c04c3350b
Arming disabled flags into text
2019-01-23 16:06:53 +01:00
c0c81e5d37
Add support for OSD Profile and LED Profile in-flight adjustments
2019-01-22 19:07:32 -05:00
f1b6ec1111
Add unknown OSD warnings
2019-01-21 12:01:14 +01:00
33438ea740
Merge pull request #1274 from McGiverGim/add_beeper_rc_smoothing
...
Add beeper RC SMOOTHING INIT FAIL
2019-01-21 18:52:45 +13:00
0c34272e52
Add support for 32bit OSD warnings bitmask; add missing warnings elements
...
Adds support for 32 warnings instead of just 16.
Adds a warnings count to MSP to support future improvements to handle unknown warnings better.
Added missing warnings where support was added to the firmware but not in the configurator.
2019-01-17 20:24:49 -05:00
Asizon
mikeller
Alberto García Hierro
Míguel Ángel Mulero Martínez
Juzzle1
TheIsotopes
Miguel Angel Mulero Martinez
Leo Bottaro
ctzsnooze
Nicola De Pasquale
David Boone
fgiudice98
Roy van der Veen
Bruce Luckcuck
Richard Cooper
jflyper
Anisotropic
Kyle K
IvoFPV
Hydra
Pieter Kruger
Károly Kiripolszky
Krzysztof Matula
Ian Murphy
Cleric-K
AJ Christensen
jack
Ghostface
Dave Huber
Sean M