31f40ffa97
xburst: remove an obsolete CompareKernelPatchVer call
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32115 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-07 16:32:44 +00:00
3613a9f2f8
[brcm63xx] fix 553-board_96348w3.patch patch wrt gpio-keys-polled
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32096 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-06 20:58:45 +00:00
95a748c5b8
ar71xx: fix LZMA loader build regression from r32090 (thx, juhosg)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32095 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-06 19:37:49 +00:00
7dc116bbbc
kernel: add a few more tracing related symbols
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32094 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-06 18:04:00 +00:00
d591d58ff7
ar71xx: fix PHY setup on TL-MR3020 ( fixes #11572 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32093 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-06 17:24:12 +00:00
02b7e81b78
ar71xx: add a helper function for setting up PHY4 swapping on ar933x
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32092 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-06 17:24:09 +00:00
c1a3f3f3db
target: do not make target/*/install depend on target/*/compile - removes one redundant kernel build dir call on target/install
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32091 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-06 17:24:05 +00:00
bd86f88b0a
ar71xx: only build all loader images if the image builder is enabled - saves some time on make target/install
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32090 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-06 17:24:01 +00:00
5153308130
[brcm63xx] fix alarm led color for board 96348A-122
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32089 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-06 16:07:46 +00:00
72aba7b527
[brcm63xx] add 96348w3 board ( #10764 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32088 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-06 15:45:04 +00:00
2e63f6da68
[brcm63xx] update livebox board support ( #8677 )
...
Merge most fixes from #8677 :
- add basic hardware detection of Livebox Blue 5g revisions
- register leds and gpio buttons
- fix boot address location
- properly parse mac addresses
Plus some more fixes:
- make board_livebox.c more in line with board_bcm963xx.c
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32087 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-06 15:44:56 +00:00
0abe5c6244
[brcm63xx] fix leds naming for all bcm63xx boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32086 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-06 15:44:52 +00:00
556a289006
kernel: make tracing support configurable
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32085 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-06 15:25:57 +00:00
cc14bc096e
[brcm63xx] backport upstream spi-bcm63xx fixes
...
* message pump conversion
* not using stopping state
* setting spi driver mode bits
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32078 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-06 13:31:33 +00:00
b3448742b9
[generic/3.3] backport spi message queue infrastructure
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32077 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-06 13:31:30 +00:00
0c59a91df5
[brcm63xx] increase led number in patch 301-led_count.patch
...
So that board patches are only touching board-related code
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32076 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-06 13:31:24 +00:00
ff53498dd2
[lantiq] clean up generic image building
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32065 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-05 17:49:42 +00:00
9f6ef16bdc
[brcm63xx] fix board patches so that new boards are withing appropriate ifdef
...
Some new board definitions were added within the #ifdef CONFIG_CPU_6338
section while some other were added within #ifdef CONFIG_CPU_6345, fix this
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32060 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-05 13:40:41 +00:00
18ad7d53f3
[kernel/3.3] refresh generic patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32059 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-05 13:40:38 +00:00
c349282eff
[brcm63xx] fix bisectability of patch 303-spi-board-info.patch
...
It uses spi_register_board_info() from linux/spi/spi.h but does not include it
explicitely.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32058 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-05 13:40:35 +00:00
266c70cdf4
[kernel] bump to 3.3.8
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32055 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-05 06:57:51 +00:00
321654ac94
kirkwood: reorganize target
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32053 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-05 00:43:56 +00:00
1a03c75de1
uboot-envtools: update to 2012.04.01
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32051 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-04 21:55:49 +00:00
7d6df5d239
bcm63xx: fix ethernet on 96328avng and 963281TAN
...
The internal switch did not get registered.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32041 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-04 08:35:25 +00:00
8cf477bc73
[lantiq] adds unset Kbuild symbol
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32026 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-02 14:03:32 +00:00
2338cf02a3
malta: remove 3.2 patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32023 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-02 12:06:28 +00:00
f55b4431ff
malta: use common kernel config
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32022 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-02 12:06:26 +00:00
4eb473784c
xburst: add missing config symbol
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32021 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-02 12:06:15 +00:00
73804551c6
[imagebuilder] add $(SUBTARGET) to the filename if available
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32007 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-30 18:04:15 +00:00
c7942cd68f
[kernel] adds patch to make Tantos (psb6970) switch buildable again
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32006 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-30 17:41:28 +00:00
b032357e85
bcm63xx: build images for 6328 reference boards with various flash sizes
...
Build images for 96328avng and 963281TAN (untested) for three different
flash sizes: 4MB, 8MB, and 16MB.
Known issues:
* Button setup unknown, thus no fail-safe available.
* All other BCM6328 and BCM63XX issues
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32004 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-30 10:27:46 +00:00
e343446e23
bcm63xx: readd accidentially dropped network config for SPW303V
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32003 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-30 10:27:42 +00:00
8e8353898c
generic: ar8216: add revision specific PHY fixups for AR8327
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32000 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-29 16:39:27 +00:00
37ce7c5714
generic: ar8216: replace chip_type field with chip_{ver,rev} in ar8216_priv
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31999 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-29 16:39:26 +00:00
049f00ab72
generic: ar8216: add chip_is_ar8{216,236,316,327} helpers
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31998 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-29 16:39:24 +00:00
c91ffa0c10
ar71xx: add default LED setup for the DB120 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31997 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-29 16:39:23 +00:00
37d6b252ef
cns21xx: use the generic uci-default functions for initial LED setup
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31996 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-29 16:39:22 +00:00
66fca35779
lantiq: use the generic uci-default functions for initial LED setup
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31995 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-29 16:39:21 +00:00
e7cab28a32
kirkwood: use the generic uci-default functions for initial LED setup
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31994 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-29 16:39:20 +00:00
32b2b86076
ramips: use the generic uci-default functions for initial LED setup
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31993 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-29 16:39:18 +00:00
cceb4f9eb6
ar71xx: use the generic uci-default functions for initial LED setup
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31992 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-29 16:39:17 +00:00
1fe95ce50b
kirkwood: use uci-defaults to configure different boards
...
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31990 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-29 16:39:15 +00:00
84bbc1f8b0
ramips: WAN LED for D-Link DIR-300-B1
...
Add led devices for D-Link DIR-300-B1 WAN LED.
Note that the GPIO state is also ANDed with the esw switch port 4
LED state, which is why I've set the amber LED to default-on.
Closes: https://dev.openwrt.org/ticket/11326
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
[ juhosg:
- fix comment style in mach-dir-300-revb.c,
- remove the PPP specific LED setup, not everyone uses a PPP connection
on the WAN interface]
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31989 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-29 16:39:03 +00:00
7bf6009fe6
ar71xx: do not override the mdio clock for ar9330. the override value (obtained from an atheros driver) seems to break ethernet functionality
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31956 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-28 20:39:50 +00:00
55e7bd410c
ar71xx: improve rx performance of the ethernet driver by using build_skb to deliver a cache-hot skb to the network stack
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31934 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-28 02:55:59 +00:00
026245749a
ar71xx: fix MII clock settings for various chips, improves ethernet stability on AR934x
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31925 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 21:02:41 +00:00
2708355504
kernel: fix suppressing -s for linking modules when profiling is enabled
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31924 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 21:02:36 +00:00
4243897bf7
ar71xx: fix TL-WR1041 image size
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31923 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 17:21:47 +00:00
7613c70c38
ramips: rt3883: add device registration code for the SPI controller
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31922 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 17:10:00 +00:00
948640b4dd
ramips: allow to use the SPI driver on RT3662/RT3883
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31921 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 17:09:58 +00:00
dafda799dd
ramips: rt3883: fix GPIO reservation for the SPI pins
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31920 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 17:09:56 +00:00
c47535b3dc
ramips: rt305x: remove superfluous controller_data assignment
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31919 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 17:09:52 +00:00
ee236b9e96
ramips: make rt2x00 firmware extraction quiet
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31918 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 17:09:50 +00:00
54d14f8850
generic: rtl8367: rename a misnamed variable
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31917 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 17:09:47 +00:00
e4f7489ec1
generic: rtl8366_smi: remove duplicated spinlock initialization
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31916 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 17:09:45 +00:00
d89221e9ce
generic: rtl8366_smi: rename debugfs Kconfig symbol
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31915 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 17:09:43 +00:00
d57d3c1a10
generic: rtl8367: allow to use VLANs > 31
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31914 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 17:09:41 +00:00
c9b641b53d
[lantiq] move files-3.3 -> files
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31912 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 16:13:02 +00:00
78bf2cbd71
[lantiq] 3.2 R.I.P.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31911 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 16:12:59 +00:00
7ee1e4f822
[lantiq] dgn3500 support with eeprom loading from sysfs
...
WIFI eeprom:
As discussed, it is impossible for nand and spi flash platforms to have the eeprom data available from mtd. I suggested to load the eeprom from user-space. I've looked into regular firmware loading but this is only possible when using modules. I've created a sysfs entry that allows reading and writing the eeprom data to the platform data. After loading the eeprom data I rely on pci-hotplug support to disable the bogus pci device and rescan the bus (with fixups and all). Because hotplug is not available, an init script is created that performs the copy from mtd to platform data. I think it is best to eventually move the sysfs functions to dev_wifi_athxk.c file, this would get rid of the external to the ath9k platform data.
SPI flash:
It seems that the spi-xway driver is not really working. It causes my kernel to crash in all sorts of ways. I added to bitbang SPI to be able to the calibration data mention above.
I've kept the original mtd partitioning that Netgear uses.
Buttons/LED:
Both buttons are working properly. Two leds are not enabled: The red internet led is connected to the pci_gnt1 pin... I can't disable it because then DMA stops working.
The green wifi led is connected to an unknown atheros gpio.
Signed-off-by: Pieter Voorthuijsen <p.voorthuijsen at gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31910 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 16:02:22 +00:00
f2dfa4d3a4
[lantiq] fixes zyxel p2601hnfx
...
moves the linux partition, removes the config partition and the
buttons settings have small adjustments.
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31909 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 16:02:20 +00:00
9669f7a243
[lantiq] Add basic configuration for new board ZTE H201L. Still missing are button and led gpio values.
...
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31908 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 16:02:16 +00:00
260e2d8486
kernel: properly pad the allocated headroom in skb_cow to NET_SKB_PAD
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31906 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:16:37 +00:00
4f1451b47e
linux/3.2: R.I.P.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31905 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:37 +00:00
7e71e51d60
xburst: remove support for old kernels
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31904 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:35 +00:00
3a3b7f8beb
xburst: switch to 3.3 and add broken flag
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31903 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:33 +00:00
6aee5d7ee0
xburst: add support for 3.3
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31902 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:32 +00:00
335e441860
ppc44x: remove 3.2 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31901 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:30 +00:00
7239fa0db7
ppx44x: switch to 3.3 and add broken flag
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31900 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:28 +00:00
cad698f8fc
ppc44x: add support for 3.3
...
Compile tested only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31899 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:27 +00:00
312050717e
cobalt: switch to 3.3 and add broken flag
...
Compile tested only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31898 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:26 +00:00
85ac8f2fc1
ep93xx: remove 3.2 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31897 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:24 +00:00
fdd7fc1425
ep93xx: switch to 3.3 and add broken flag
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31896 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:23 +00:00
a21ef1e86d
ep93xx: add support for 3.3
...
Compile tested only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31895 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:21 +00:00
47555ae06c
au1000: remove 3.2 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31894 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:18 +00:00
480346bdcb
au1000: switch to 3.3 and add broken flag
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31893 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:17 +00:00
854bea7e28
au1000: add support for 3.3
...
Compile tested only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31892 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:15 +00:00
827fdc608c
linux/3.1: R.I.P.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31891 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:09 +00:00
8aea17b6d8
omap24xx: remove 3.1 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31890 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:07 +00:00
77cd6a37fe
omap24xx: switch to 3.3 and add broken flag
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31889 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:05 +00:00
cbc3cd7b0e
cns3xxx: remove 3.1 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31888 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:03 +00:00
9853f97374
cns3xxx: switch to 3.3 and add broken flag
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31887 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:02 +00:00
489514ce70
kernel: add a few patches for avoiding unnecessary skb reallocations - significantly improves ethernet<->wireless performance with mac80211 based drivers
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31886 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 14:43:58 +00:00
b93700be90
bcm63xx: build images for DSL-274XB revision F1
...
Build images for D-Link DSL-274XB revision F1. Flashing
through original web UI as well as CFE works.
Known issues:
* wifi led inverted (on when wifi is off and vice cersa)
* same issues as generic bcm6328 support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31885 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:51 +00:00
e4a82f8318
bcm63xx: add ath9k to atheros wifi profile
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31884 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:48 +00:00
2df17dbf20
bcm63xx: enable bcm6328 support and required drivers
...
BCM6328 support is in a usable state, with the following issues
* internal switch port not configurable
* external phys not supported
* broadcom wifis will probably not work correctly
* and all other generic bcm63xx issues (so yes, still no ADSL)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31883 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:46 +00:00
20cab203ed
bcm63xx: add support for DSL-274XB rev F1
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31882 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:43 +00:00
58de534f18
bcm63xx: fix port state after network down
...
bcm_enetsw_probe did not properly reset port states, resulting in
connected ports staying disabled after bringing up the interface the
second time.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31881 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:40 +00:00
9a873721da
bcm63xx: add a fixup for ath9k devices
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31880 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:37 +00:00
96ef7778af
bcm63xx: add support for the HSSPI controller
...
Add support for the HSSPI controller found on bcm6328 and SPI attached
flash.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31879 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:33 +00:00
5b950415b8
bcm63xx: add preliminary support for bcm6328
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31878 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:29 +00:00
bf8af3c6f2
bcm63xx: add flash type detection
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31877 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:25 +00:00
afb39de7d0
bcm63xx: pad Speedport W303 V images to 4 MiB
...
Prevents CFE from flashing to the second image offset. Fix up the rootfs
length on first boot else CFE will complain.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31876 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:22 +00:00
4ecf7d09a1
bcm63xx: add a default switch configuration for DSL-274XB
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31874 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:17 +00:00
4abdddf848
bcm63xx: setup network config through uci-defaults
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31873 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:14 +00:00
6082cee9d6
bcm63xx: move the board name workaround to /lib/brcm63xx.sh
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31872 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:11 +00:00
1148159a4f
bcm63xx: use the exact board id as board identification string
...
No need to keep the bcm63xx/ at the start or the chipid info at the end.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31871 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:08 +00:00
0b257a6c10
kernel: fix a warning in the connmark module
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31856 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-24 18:25:08 +00:00
e100214e23
kernel: update linux 3.3 to 3.3.7
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31848 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-23 21:05:32 +00:00
0730d9fbb8
ar71xx: fix an insignificant typo
...
Patch from #11485 .
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31847 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-23 21:05:30 +00:00
3412f35035
ar71xx: fix WLAN led for RB751U-2HnD and RB751G-2HnD
...
Patch by Kamil Trzciński <ayufan@osk-net.pl>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31846 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-23 21:05:25 +00:00
d9f7205aa4
ar71xx: add support for TP-Link TL-MR3040
...
Support for TP-Link TL-MR3040. Power LED not working - always on red, after
start should be green.
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31845 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-23 21:05:24 +00:00
db37661614
ramips: Add byte queue limits support to net/ethernet/ramips_main.c
...
Add byte queue limits support to net/ethernet/ramips_main.c
"Byte queue limits are a mechanism to limit the size of the transmit
hardware queue on a NIC by number of bytes. The goal of these byte
limits is too reduce latency (HOL blocking) caused by excessive
queuing in hardware (aka buffer bloat) without sacrificing
throughput."
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31844 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-23 21:05:23 +00:00
713c364289
ramips: Enable sysupgrade for Sitecom WL-351
...
Sysupgrade works just fine on my Sitecom WL-351 after adding this
oneliner.
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31843 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-23 21:05:22 +00:00
831c677efc
linux/3.3: avoid recursive calling of mtd_writev in the block2mtd driver
...
Should fix #11513 . Tested with the x86/generic squashfs image within a VM.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31841 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-23 21:05:19 +00:00
192dbdd2f5
lantiq: allow platforms with rt2x00 to override the mac address without overriding eeprom, fixes bogus wlan mac address on arv4520
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31835 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-20 21:58:03 +00:00
b21bdefb82
kernel: merge a net-next fq_codel backlog handling fix
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31813 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 22:12:15 +00:00
bfdcb53577
omap24xx: add support for 3.3
...
Compile tested only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31810 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 20:22:32 +00:00
020b994103
cns3xxx: add support for 3.3
...
Compile tested only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31809 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 20:10:53 +00:00
67ea71e397
linux/2.6.39: R.I.P.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31808 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 20:10:51 +00:00
e738b2550a
cns3xxx: sync kernel config
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31807 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 20:10:48 +00:00
a24db87f22
cns3xxx: remove 2.6.39 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31806 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 20:10:46 +00:00
07e53bcad1
cns3xxx: switch to 3.1
...
Compile tested only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31805 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 20:10:44 +00:00
b7b3fce329
x86: remove support for old kernels
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31804 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 20:10:42 +00:00
7503ab47c1
x86: remove subtarget specific LINUX_VERSION overrides
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31803 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 20:10:38 +00:00
a5c66329a0
x86/ep80579: switch to 3.3
...
Also fix build errors in the ep80579-drivers package.
Compile tested only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31802 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 20:10:33 +00:00
6a07b477c0
brcm47xx: fix nvram read out on devices with serial flash
...
detect nvram on Linksys E3200
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31790 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 16:04:10 +00:00
1dd74eea6b
brcm47xx: bcma: fix null pointer
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31789 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 15:46:30 +00:00
972c918b16
brcm47xx: ssb: recognize ARM Cortex M3
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31788 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 15:45:51 +00:00
fd3e6d0687
brcm47xx: some fixes for the USB driver
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31787 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 15:44:25 +00:00
111aa40027
cobalt: remove 2.6.39 specific patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31785 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 09:59:22 +00:00
715476a93a
x86/olpc: switch to 3.3
...
Compile tested only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31784 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 09:57:32 +00:00
0a3596481b
x86: image: select bootscript images by default for OLPC
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31783 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 09:57:29 +00:00
2a0cc9a89b
adm5120: add missing config symbols for the rb1xx subtarget, fixes #11407
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31781 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-17 21:20:23 +00:00
d73794f9a2
target: add a feature flag for RTC support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31777 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-17 15:28:09 +00:00
06370f57c1
kernel: add some missing config options added by r31756
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31774 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-17 13:28:30 +00:00
f9cfc0fd4a
kernel: ssb/bcma: update to version from wireless-testing tag master-2012-05-16-2
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31772 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-17 13:22:38 +00:00
20de9681f0
brcm47xx: remove support for kernel 3.2
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31771 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-17 13:20:10 +00:00
bee7068b92
x86/thincan: switch to 3.3
...
Compile tested only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31765 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-17 06:41:01 +00:00
6cfdf98882
x86/xen_domu: switch to 3.3
...
Compile tested only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31764 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-17 06:41:00 +00:00
dec6db1eb1
x86/kvm_guest: switch to 3.3
...
Compile tested only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31763 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-17 06:40:58 +00:00
34e5c69695
x86/generic: switch to 3.3
...
Compile tested only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31762 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-17 06:40:56 +00:00
0c6a3e365f
kernel: add codel and fq_codel to generic 3.3 patch set (based on patch by Dave Täht)
...
Codel is a new AQM algorithm and RED replacement designed by
Kathie Nichols and Van Jacobson, and published in ACM queue:
http://queue.acm.org/detail.cfm?id=2209336
Codel stands for "Controlled Delay", and needs no knobs in the
general case, twiddled, for optimum results. It aims for 5ms of
delay, at most, when in use.
Additionally,
fq_codel (by eric dumazet) builds on codel to provide fair queuing
superior to what could be had with SFQ, and drop behavior saner
than RED, BLUE, or choke.
These patches are backported from net-next and are known to work
on Linux 3.3.4 and later.
Includes updates to codel for better portability and speed
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31756 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-16 15:23:03 +00:00
c3340cff15
x86/alix2: switch to 3.3
...
Compile tested only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31753 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-16 10:45:02 +00:00
d65bd1499c
x86/net5501: switch to 3.3
...
Compile tested only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31752 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-16 10:44:59 +00:00
6c0225b8c5
x86: sync 3.3 configs
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31751 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-16 10:44:55 +00:00
3345e73573
x86: sync 3.2 configs
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31750 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-16 10:44:52 +00:00
8ace34552a
x86: sync 2.6.39 configs
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31749 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-16 10:44:49 +00:00
4cd69e320c
linux/3.3: add missing symbol
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31748 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-16 10:44:46 +00:00
880547fc5a
linux: add CONFIG_POWER_SUPPLY_DEBUG symbol
...
It was missing in the previous commit.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31738 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-15 11:12:31 +00:00
cb4c118e50
linux: move certain disabled symbols to the generic configs
...
* CONFIG_ARCH_DMA_ADDR_T_64BIT
* CONFIG_ARCH_HAS_ILOG2_U32
* CONFIG_ARCH_HAS_ILOG2_U64
* CONFIG_ARCH_PHYS_ADDR_T_64BIT
* CONFIG_ARCH_SUPPORTS_MSI
* CONFIG_GENERIC_CPU_DEVICES
* CONFIG_HWMON_DEBUG_CHIP
* CONFIG_I2C_PXA_PCI
* CONFIG_LEDS_GPIO
* CONFIG_MINIX_FS_NATIVE_ENDIAN
* CONFIG_MLX4_CORE
* CONFIG_POWER_SUPPLY
* CONFIG_POWER_SUPPLY_DEBUG
* CONFIG_QUOTACTL
* CONFIG_SDIO_UART
* CONFIG_SENSORS_K10TEMP
* CONFIG_SENSORS_SCH56XX_COMMON
* CONFIG_SENSORS_VIA_CPUTEMP
* CONFIG_SERIO_AMBAKMI
* CONFIG_SERIO_I8042
* CONFIG_SERIO_LIBPS2
* CONFIG_SERIO_PCIPS2
* CONFIG_SERIO_RAW
* CONFIG_SERIO_SERPORT
* CONFIG_SPI_BITBANG
* CONFIG_SPI_GPIO
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31737 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-15 10:58:52 +00:00
f47ed77684
ar71xx: remove AG71XX_RX_PKT_RESERVE, it is no longer necessary (found by Eric Dumazet)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31736 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-15 10:36:39 +00:00
e6d50dae72
[lantiq] code style cleanup of the mach files
...
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31735 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-15 09:38:05 +00:00
499d5b1ca6
[lantiq] adds zyxel p2601hnfx support
...
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31734 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-15 09:38:02 +00:00
d92ae2699f
[lantiq] set 3.3.6 as default
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31733 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-15 09:37:59 +00:00
27cb15eccd
[lantiq] set 3.3.5 as default
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31718 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-14 16:11:26 +00:00
9391118ede
linux/3.0: R.I.P.
...
It is used by the broken omap35xx/gumstix target only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31717 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-14 15:48:34 +00:00
bd604be582
realview: remove 3.0 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31716 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-14 15:48:32 +00:00
67e61e5edf
realview: switch to 3.3
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31715 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-14 15:48:31 +00:00
0c668d6c68
realview: add 3.3 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31714 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-14 15:48:29 +00:00
8e347885d6
linux/3.3: more missing config symbols
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31713 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-14 15:48:23 +00:00
9edd5ac6fa
imagebuilder: explicitly install the kernel .ipk before installing anything else, it is no longer part of the package index ( fixes #11450 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31711 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-14 14:00:01 +00:00
b2a6c43e1c
kernel: add CONFIG_BLK_DEV_PCIESSD_MTIP32XX
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31710 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-14 11:28:02 +00:00
cc87185921
kernel: update linux 3.3 to 3.3.6
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31709 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-14 09:18:32 +00:00
4472c6f51b
amazon: fix section mismatch
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31707 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-13 15:31:42 +00:00
e46bb17d6e
amazon: update amazon target to kernel 3.3
...
This is just compile tested, my device is currently not working.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31706 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-13 15:10:40 +00:00
99ceef899c
gemini: remove 2.6.37 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31700 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-13 12:04:04 +00:00
7ae260dc28
gemini: switch to 3.3
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31699 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-13 12:04:02 +00:00
4cf665e402
gemini: add support for 3.3
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31698 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-13 12:03:59 +00:00
1461937650
brcm47xx: generate image for Linksys WRT610N V1
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31696 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-13 00:16:57 +00:00
2181299b7e
kernel: ssb: add PCI IDs 0x4322 and 43222
...
The 0x4322 ID is found on the BCM4322 used on some SoCs like the
Linksys WRT610N V1 connected to a BCM4705. The 43222 (0xa8d6) ID
is found on the BCM43222 used on some other SoCs like the D-Link
DSL-2760U connected to a BCM63xx.
This fixes #10887 .
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31695 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-13 00:08:12 +00:00
08340bafd5
brcm47xx: fix tg3 ssb patch
...
Now tg3 works with the Ethernet core of the Linksys WRT610N v1 (again).
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31694 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-12 23:59:12 +00:00
88cd79159b
linux/2.6.38: R.I.P.
...
It is used only by the broken coldfire target.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31688 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-12 12:05:21 +00:00
3d65e0831f
linux/2.6.37: R.I.P.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31687 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-12 12:05:19 +00:00
fd1880e698
linux: add broken flag to remaining targets which are using 2.6.37
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31686 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-12 12:05:18 +00:00
c7f8133c34
iop32x: remove 2.6.37 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31685 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-12 10:49:36 +00:00
d3cf426cc1
iop32x: switch to 3.3
...
It is compile tested only, so add a broken flag.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31684 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-12 10:49:34 +00:00
5ff6d685c6
iop32x: add 3.3 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31683 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-12 10:49:32 +00:00
d6e36e0c43
sibyte: remove 2.6.37 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31682 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-12 10:49:30 +00:00
e3ba37da26
sibyte: switch to 3.3
...
It is compile tested only, so add a broken flag.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31681 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-12 10:49:28 +00:00
cbc9541ba9
sibyte: add 3.3 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31680 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-12 10:49:26 +00:00
c267904494
ixp4xx: fix ixp4xx_crypto build error
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31679 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-12 10:49:23 +00:00
695f59cd2c
orion: remove the broken broken flag
...
It is working on the Linksys WRT350N v2 at least:
http://pastebin.com/KCAbJZs9
Additionally, the flag was added to a wrong place
so it had no effect.
Thanks to StrikerNL for testing.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31674 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-10 20:20:43 +00:00
61a2f3d923
kirkwood: fix Kconfig symbol for NSA-310
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31673 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-09 16:16:52 +00:00
5c60980c61
[lantiq] Add 3.3 config files
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31672 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-09 12:52:24 +00:00
be7f324d5e
[lantiq] Add missing 3.3 patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31671 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-09 12:52:21 +00:00
f18079cbc3
[lantiq] Drop 2.6.32 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31670 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-09 12:52:19 +00:00
1ce55fe17c
kirkwood: add support for the ZyXEL NSA-310
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31669 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-09 11:38:43 +00:00
bc11434d61
kirkwood: add RaidSonic ICY BOX IB-NAS62x0 board support
...
Based on a patch by Luka Perkov <openwrt@lukaperkov.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31668 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-09 11:38:41 +00:00
a40ecd9d77
kirkwood: enable GPIO sysfs interface
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31667 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-09 11:38:40 +00:00
805c1e8753
kirkwood: nuke 2.6.37 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31666 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-09 11:38:39 +00:00
ceffa3f2e6
kirkwood: switch to 3.3
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31665 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-09 11:38:37 +00:00
88b4390432
kirkwood: add 3.3 support
...
Based on the 3.2.9 patches by Luka Perkov <openwrt@lukaperkov.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31664 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-09 11:38:36 +00:00
b3dac4fb22
ixp4xx: nuke 2.6.37 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31663 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-09 10:48:44 +00:00
4e77290627
ixp4xx: switch to 3.3
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31662 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-09 10:48:43 +00:00
dda432db43
mpc85xx: remove 2.6.38 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31661 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-09 10:48:41 +00:00
d9b357ca96
mpc85xx: switch to 3.3 and add broken flag
...
It is compile tested only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31660 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-09 10:48:39 +00:00
b7bb9d33b6
orion: nuke 3.0 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31659 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-09 10:48:38 +00:00
f59f32385f
orion: switch to 3.3 and add broken flag
...
It is compile tested only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31658 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-09 10:48:37 +00:00
090afbf663
linux/3.3: add missing RTC symbol
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31654 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-09 10:48:30 +00:00
6f83a7bcb2
ar71xx: fix build error if PCI is disabled
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31646 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-07 21:16:22 +00:00
3303e79b79
kernel: update linux 3.3 to 3.3.5
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31645 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-07 20:11:43 +00:00
4a6a77ad8b
pxa: remove 2.6.37 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31643 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-07 17:40:15 +00:00
bab1f8af42
pxa: switch to 3.3 and mark it as broken
...
It is working in qemu, but it has not been tested on real hardware.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31642 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-07 17:40:09 +00:00
6509d0f6a0
pxa: add support for 3.3
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31641 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-07 17:40:06 +00:00
94808b59b4
atheros: Fix compilation
...
With our recent switch to the 3.3 kernel target, some headers were
occidentally omitted.
Signed-off-by: Jonathan Bither <jonbither@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31640 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-07 17:06:39 +00:00
8336cde37f
bcm63xx: fix a race between PCI bus scan and fallback sprom registration
...
The fallback sprom handler was installed too late, resulting in ssb
failing to get a valid sprom on some devices.
Fixes #11384 .
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31638 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-06 21:25:34 +00:00
f20d1938b5
kernel: rewrite the phy packet hook, put it in the network stack to avoid having to keep non-upstream ethernet driver changes
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31637 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-06 21:19:14 +00:00
7432f7b3e8
brcm47xx: add gpio_request_one()
...
This fixes a compile error with kernel 3.3.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31635 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-06 20:44:37 +00:00
72fd178aa2
atheros: clean up the patches some more
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31626 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-06 17:15:00 +00:00
ee9f3b6a3c
atheros: update to 3.3.4 (based on work by acoul), fix mvswitch driver for newer kernels
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31625 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-06 17:08:30 +00:00
2e8211d607
AR7: don't mark as broken
...
Linux 3.3.4 boots fine on my AR7 device.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31623 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-06 14:04:19 +00:00
817b19be29
ar7: remove 2.6.37 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31617 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05 17:32:43 +00:00
7bf954fcec
ar7: switch to 3.3 and mark the target as broken
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31616 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05 17:32:41 +00:00
7b3873c7fb
ar7: add 3.3 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31615 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05 17:32:39 +00:00
2034dd105a
ar7: fix kernel_entry extraction
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31614 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05 17:32:36 +00:00
5b7d0a95c8
ar71xx: add profile and build image for the TL-WR1041N v2 board
...
Patch-by: Vince Huang <axishero@foxmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31610 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05 17:02:41 +00:00
b373fefee9
ar71xx: add support for the TP-Link TL-WR1041N v2 board
...
Patch-by: Vince Huang <axishero@foxmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31608 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05 17:02:35 +00:00
9f2ec6e9f6
ar71xx: update 3.3 patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31602 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05 13:56:35 +00:00
b56c425713
ar71xx: fix a typo in the db120 mach file
...
Reported-by: Sven Eckelmann <sven@narfation.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31601 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05 13:56:30 +00:00
8af7dd959a
brcm47xx: update target to kernel 3.3
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31599 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05 12:53:37 +00:00
3a416fef4f
linux/2.6.32: R.I.P.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31597 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05 11:43:34 +00:00
c52b8023cf
rdc: remove 2.6.32 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31596 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05 11:43:32 +00:00
c31d5201a9
rdc: switch to 3.3 and mark the target as broken
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31595 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05 11:43:30 +00:00
7e4d9c944d
rb532: remove 2.6.32 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31594 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05 11:43:29 +00:00
878d24135e
rb532: switch to 3.3 and mark the target broken
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31593 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05 11:43:26 +00:00
0d82b63788
rb532: add 3.3 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31592 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05 11:43:23 +00:00
b6e9dc210c
mpc83xx: remove broken flag
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31591 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05 11:43:21 +00:00
01084da42d
mpc83xx: populate network config from an uci-default script
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31590 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05 11:43:19 +00:00
446881548b
mpc83xx: cleanup rb333.dts
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31589 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05 11:43:16 +00:00
fd44e29d33
mpc83xx: fix MAC addresses on the RB333
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31588 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05 11:43:13 +00:00
22743ef943
mpc83xx: fix build warnings in RB333/600 dtb wrappers
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31587 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05 11:43:10 +00:00
dda43ef81e
linux/2.6.32: fix layer7 patch
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31586 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05 07:20:13 +00:00
9db9f75c47
[omap4]: upgrade to 3.3, enable framebuffer
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31576 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-03 21:51:58 +00:00
dc7a519585
adm5120: add missing NULL terminator to partition parser list
...
Fixes #11372 .
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31574 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-03 21:03:50 +00:00
a56ea99b6d
brcm47xx: add support for kernel 3.3
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31573 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-03 20:18:41 +00:00
7f4625bd8c
Fix iptables abuse of kernel header files. Use exported headers instead.
...
[juhosg: export xt_layer7.h for all kernel versions]
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31566 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-03 09:43:10 +00:00
dab41fab68
ramips: W306R V2.0 - GPIO and Network fixes
...
Fixed: GPIO typos and confirmed GPIO_BUTTON_RESET
Fixed: Lan & Wan reversed: swaped "eth0.2" with "eth0.1" by
removing a line(default is correct), and reversed the
Lan/wan layout LLLLW to WLLLL.
Added: image/Makefile now builds -factory.bin files. I am
unsure of the accepted way to change the makefile but
the name of the image needs to be 'linkn Kernel Image'
in order to be accepted by the OEM firmware.
Known issue: eth0 (internal switch i think has mac address:
00:11:22:33:44:55 but i think it should be same as
the lan).
Known issue: Pressing the reset button has no noticable effect,
i would expect the router to boot failsafe if being
pressed on boot, reboot if short press and reset all
to default if long press.
[juhosg: remove mtdlayout_W306R and use mtdlayout_4M instead]
Signed-off-by: David Pearce <david_18051985@hotmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31557 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-02 19:17:59 +00:00
a246e32c0d
ramips: Make serial console for DIR-300-B1 work again
...
Make serial console for DIR-300-B1 work again.
With some recent change, "console=ttyS1,57600" was removed from the
default kernel command line, this adds the necessary mkcmdline
incantation to image/Makefile to add it there for this target.
This is quite likely broken for other targets as well.
Without this the console switches to ttyS0 instead of ttyS1 and
kernel output is missing, and the userspace comes up with 9600 baud
instead of 57600.
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31556 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-02 19:17:58 +00:00
fa0ed4d09c
mpc83xx: remove 2.6.36 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31555 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-02 18:27:26 +00:00
b0d93742c9
mpc83xx: switch to 3.3
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31554 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-02 18:27:25 +00:00
e3f47b22e7
mpc83xx: add support for 3.3
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31553 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-02 18:27:22 +00:00
918f2e287c
linux/3.3: add more missing symbols
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31552 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-02 18:27:19 +00:00
a9d023be01
[brcm63xx] use a define for the poll and debounce interval
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31550 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-02 15:40:26 +00:00
8bf403c6f9
linux/3.3: add more missing symbols
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31548 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-01 08:00:26 +00:00
0be01c2456
move CONFIG_BOOKE_WDT_DEFAULT_TIMEOUT to the target configs
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31547 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-01 08:00:25 +00:00
9d2b3add2a
[coldfire]: switch to 2.6.38
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31546 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-01 07:00:17 +00:00
465b2a024c
kernel: update linux 3.3 to 3.3.4
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31541 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-30 08:38:11 +00:00
2341f7444d
linux: rtl836x: add a generic reset_switch function
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31536 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 18:29:31 +00:00
bd9308390c
linux: rtl836x: rename rtl836*_hw_init to rtl836*_setup
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31535 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 18:29:29 +00:00
b29026e34d
linux: rtl836x: add a reset_chip callback to rtl8366_smi_ops
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31534 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 18:29:26 +00:00
01bea635cb
ar71xx: allow to disable link polling on unused PHYs
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31533 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 18:29:24 +00:00
ca5d892a23
rb532: remove 2.6.35 support
...
The generic 2.6.35 support has been remove long time ago.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31532 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 16:56:07 +00:00
8f2556fba2
linux/3.3: refresh patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31531 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 16:56:03 +00:00
9d5f7f2b3f
rdc: add 3.3 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31530 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 15:59:49 +00:00
a5e8ad777f
mpc85xx: add support for 3.3
...
Based on a patch by Wojciech Dubowik <Wojciech.Dubowik@neratec.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31529 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 15:55:28 +00:00
4528485723
orion: add 3.3 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31528 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 15:20:40 +00:00
fc25550f74
linux/3.3: yet another missing symbol
...
Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31527 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 15:08:24 +00:00
223e587e83
linux/3.3: add support for the Pericom PT7C4338 I2C RTC chip
...
Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31525 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 15:08:22 +00:00
5b31bbd719
mpc85xx: add kmod-booke-wdt to the default packages
...
Based on a patch by Wojciech Dubowik <Wojciech.Dubowik@neratec.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31523 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 15:00:38 +00:00
9f03b39d07
mpc85xx: don't override CONFIG_WATHCDOG
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31521 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 15:00:36 +00:00
d7df86f4a9
linux: move CONFIG_BOOKE_WDT to the generic config
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31520 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 15:00:34 +00:00
5613414b3d
linux/2.6.36: R.I.P.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31519 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 15:00:33 +00:00
2c96c72068
linux: add broken flag to targets which are using 2.6.36
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31518 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 15:00:32 +00:00
082ed7a614
adm5120: create a new subtarget for the RB1xx devices
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31513 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 07:36:46 +00:00
1760493c18
adm5120: share a common kernel config between the subtargets
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31512 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 07:36:44 +00:00
0c2c450f24
adm5120: merge 3.3 patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31511 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 07:36:43 +00:00
d5cd0a15d4
adm5120: remove 2.6.32 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31510 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 07:36:37 +00:00
5f4e66bbef
adm5120: switch to 3.3.3
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31509 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 07:36:36 +00:00
566114524e
adm5120: fix macronix bootloc patch
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31508 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 07:36:35 +00:00
292dd8196f
ramips: rt305x: extract wifi eeprom and use the 8M template for the UR-336UN
...
Patch-by: Lebedev Dmitry <lebedev@trendnet.ru>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31507 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 07:36:33 +00:00
2181972fae
adm8668: merge 3.3 fixes
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31497 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-28 10:41:43 +00:00
ccc459af62
adm8668: nuke 2.6.36 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31496 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-28 10:39:47 +00:00
e04cac52f9
adm8668: switch to 3.3
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31495 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-28 10:38:53 +00:00
7466f87cc1
[brcm63xx] switch to gpio-keys-polled
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31491 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-27 16:44:48 +00:00
d50a36d625
linux/3.3: yet another missing symbol
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31488 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-27 06:31:43 +00:00
b5f3dda123
build: rework verbosity level selection
...
V=99 and V=1 are now deprecated in favor of a new verbosity class system,
though the old flags are still supported.
You can set the V variable on the command line (or OPENWRT_VERBOSE in the
environment) to one or more of the following characters:
- s: stdout+stderr (equal to the old V=99)
- c: commands (for build systems that suppress commands by default, e.g. kbuild)
- w: warnings/errors only (equal to the old V=1)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31484 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-26 17:53:56 +00:00
42f83d2e57
brcm47xx: BCMA - Modified PCI CFG space access
...
The existing code (prior to the patch) does an "ioremap_nocache" on a
subset of a memory region that I think has already been mapped, and then
un-maps that smaller region when it is finished.
Thanks Nathan Hintz for the patch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31481 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-25 20:32:17 +00:00
ef1b10d0f1
adm8668: add support for 3.3
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31480 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-25 18:53:49 +00:00
af3ff2e7b6
adm8668: build gzip compressed uImage for testing
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31479 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-25 18:53:48 +00:00
999e94b5d9
adm8668: use a suffix for initramfs images
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31478 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-25 18:53:46 +00:00
7a2e03f5e3
ar71xx: enable MIB counters in the built-in switch of the AR934x
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31476 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-25 13:02:11 +00:00
c49fa68f6e
adm5120: remove 2.6.38 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31475 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-25 12:57:35 +00:00
e1a582c1ce
adm5120: add 3.3 support
...
Partially based on the 3.1 patches by Hartmut Knaack <knaack.h [at] gmx.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31474 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-25 12:57:33 +00:00
0965fa8af6
linux/3.3: fix compiler warnings in the plat_nand driver
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31473 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-25 12:57:29 +00:00
949ba90900
adm5120: make 5GXi depends on CPU_LITTLE_ENDIAN
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31472 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-25 12:57:26 +00:00
e6eed565e3
brcm47xx: A couple of other (inconsequential) BCMA patches
...
Noticed these while reviewing the code.
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31471 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-24 21:56:42 +00:00
ec90781175
brcm47xx: b44 fix workaround detection on some brcm47xx boards
...
Because of api change of nvram_getenv, the workaround failed to detect the hardware.
Based on patch by b.sander
Fixes #11268 .
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31470 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-24 20:35:46 +00:00
643a3ba58c
bcm63xx: drop linux 3.2 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31464 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-24 11:49:27 +00:00
f8cce554ff
bcm63xx: drop linux 3.0 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31463 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-24 11:49:24 +00:00
d4be3ed641
bcm63xx: switch kernel to 3.3
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31462 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-24 11:49:19 +00:00
5913da2e94
ar71xx: TL-WR741NDv4: add WLAN LED config
...
On TP-Link TL-WR741ND version 4, the WLAN LED must be configured to work.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31461 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-24 11:38:44 +00:00
281a545b07
kernel: update linux 3.3 to 3.3.3
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31460 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-24 09:25:38 +00:00
5520ed39bf
kernel: update linux 3.2 to 3.2.16
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31459 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-24 09:25:35 +00:00
4c00516bd2
kernel: add some more missing kernel config symbols
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31458 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-24 09:25:32 +00:00
5d3e17b374
[generic] enable NF_CONNTRACK_PROCFS for Linux 3.3, required for /proc/net/nf_conntrack ( #11339 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31454 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-24 00:55:57 +00:00
1393da343c
x86: restore config-default, it is needed for 2.6.39
...
Reported-by: Thomas Heil <heil@terminal-consulting.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31452 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-23 16:56:08 +00:00
74c822a8be
ramips: rt305x: add support for the UR-336UN board
...
Patch-by: Lebedev Dmitry <lebedev@trendnet.ru>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31451 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-23 16:56:06 +00:00
dd0dd6d0a0
ramips: rt305x: add support for the Asus WL-330N3G board
...
This patch adds support for the ASUS WL-330N3G
Comparing to the WL-330N, It have 32MB ram, usb support and a bicolor led.
The bi-color led is driven by 2 gpio.
I don't know how to handle this, so I simply made 2 leds : one red, one blue.
But the red light takes precedence over the blue one according to the chart below.
r = led is red
b = led is blue
0 = led is off
xy= x->r for red, b for blue led, y->value of brightness in /sys/class/leds/x/brughtness
initial state action led gpio state
r0 b0 r0->r1 r r0 b0
r0 b0 b0->b1 b r0 b1
r1 b0 r1->r0 0 r0 b0
r1 b0 b0->b1 r r1 *b1*
r1 b1 r1->r0 b r0 b1
r1 b1 b1->b0 r r1 b0
r0 b1 r0->r1 r r1 *b1*
r0 b1 b1->b0 0 r0 r0
Signed-off-by: Frédéric Leroy <fredo@starox.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31450 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-23 16:56:05 +00:00
d7054176d9
[malta] switch to 3.3
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31448 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-23 12:33:30 +00:00
7d6d93e281
[malta] add support for 3.3
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31447 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-23 12:33:27 +00:00
0283655914
[uml] switch to 3.3.2
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31446 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-23 12:33:24 +00:00
9e14302d94
[uml] add 3.3 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31445 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-23 12:33:19 +00:00
22d856df2d
[lantiq] Adding wifi eeprom extract for ARV752DPW - Easybox 802
...
Signed-off-by: Christian Rustmeier <rustmeier a.t. gmail dotty com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31443 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-23 09:40:37 +00:00
a4fcc4529e
ar8216: enable forwarding of multicast frames to the cpu port on ar8327 (thx, SeG)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31441 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-22 19:19:49 +00:00
de2804372e
[at91] flexibity: Cleanup the subtarget config
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31440 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-22 16:56:10 +00:00
32dbd5b399
[at91] tqma9263: update board definition for 3.x series and fix config choose
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31436 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-22 09:09:53 +00:00
72e3f7861a
[at91] Remove old netus board definition
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31435 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-22 09:09:50 +00:00
2e76284293
ep93xx: remove 2.6.39 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31434 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-22 07:20:55 +00:00
b154b50ea5
amazon: remove 2.6.3{0,2} support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31433 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-22 07:20:53 +00:00
4771c59d13
omap24xx: remove 2.6.38 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31426 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21 17:16:40 +00:00
31465d2422
xburst: remove 2.6.36 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31422 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21 17:03:10 +00:00
1fd9583294
malta: remove 2.6.39 and 3.0 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31421 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21 16:56:15 +00:00
61c9ef574c
mpc83xx: remove 2.6.32 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31420 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21 16:51:59 +00:00
d37663f6af
octeon: remove 2.6.30 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31419 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21 16:45:32 +00:00
febcb7168b
cns3xxx: remove 2.6.31 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31418 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21 16:42:05 +00:00
ad28da8084
au1000: remove 2.6.39 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31416 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21 16:30:40 +00:00
371ecc6b51
x86: remove 2.6.32 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31415 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21 16:17:48 +00:00
7b3e59ce27
ixp4xx: remove 2.6.3{2,8} and 3.0 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31414 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21 16:17:46 +00:00
668290df9c
linux/2.6.31: R.I.P.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31412 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21 15:18:58 +00:00
5ae4549c65
linux/2.6.30: R.I.P.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31411 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21 15:18:55 +00:00
e61d1ccbbf
linux: add broken flag to targets which are using 2.6.30
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31410 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21 15:18:54 +00:00
4522bd9b92
linux/3.3: nuke the gpio_buttons patch
...
It is superseded by the in-kernel gpio-keys-polled driver.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31409 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21 14:26:35 +00:00
7c42a215ec
mpc52xx: nuke 3.2 config
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31408 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21 12:36:47 +00:00
c1a44e1ece
mpc52xx: switch to 3.3.2
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31407 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21 12:36:45 +00:00
666a4ea643
mpc52xx: add kernel config for 3.3
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31406 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21 12:36:44 +00:00
aafeb976bf
ramips: nuke 3.2 suport
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31405 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21 12:30:53 +00:00
e4da3b437e
ramips: switch to 3.3.2
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31404 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21 12:30:51 +00:00
fe354a0b95
ramips: add support for 3.3
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31403 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21 12:30:50 +00:00
9cbdb584bf
ramips: rt305x: add OHCI/EHCI registration code for RT3352
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31402 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21 12:30:48 +00:00
3080f60ee8
ramips: rt305x: fix CPU clock detection on RT3352
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31401 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21 12:30:47 +00:00
5a5d52784e
ramips: rt305x: use different memory size setup for RT3352
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31400 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21 12:30:45 +00:00
13b3613164
ramips: rt3883: add profile and build sysupgrade image for the RT-N56U
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31399 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21 12:30:44 +00:00
d36fd45d78
ramips: add swconfig to the default package list
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31398 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21 12:30:43 +00:00
c813f4cc0a
ramips: build initramfs image for the Fonera 2.0N
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31397 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21 12:30:42 +00:00
7ffc163753
ramips: rt305x: add initial support for Tenda W306R V2.0
...
More device info at: http://wiki.openwrt.org/toh/tenda/w306r
Signed-off-by: David Pearce <David_18051985@hotmail.com.au>
[juhosg: fix checkpatch errors, remove kmod-phy and luci-ssl packages
from the profile, change broken GPIO number]
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31396 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21 12:30:40 +00:00
6c0382c496
ramips: remove hardcoded console parameter from kernel configs
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31395 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21 12:30:30 +00:00
7d694e70f0
linux/3.3: fix crypto4xx build failure
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31394 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21 10:47:04 +00:00
ac435b7daf
[target/linux/lantiq] change /etc/config/network according to actual VLAN config to enable LAN port 4 on the ARV4520PW board
...
The VLAN mapping on the ARV4520PW board is the following:
port on Router: | VLAN in software:
LAN 1 | 3
LAN 2 | 2
LAN 3 | 1
LAN 4 | 0
DSL | 4
So LAN4 is not VLAN4 but VLAN0 (VLAN4 is DSL port) -> set "3 2 1 0 5t" as default switch config.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31391 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21 08:07:21 +00:00
c4efb1ede1
ppc40x: nuke 3.2 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31387 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-20 21:03:15 +00:00
630f085252
ppc40x: switch to 3.3.2
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31386 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-20 21:03:14 +00:00
4e0f8fdfde
ppc40x: sync 3.3 config
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31385 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-20 21:03:12 +00:00
8b3c00c77f
ar71xx: remove duplicated AP121 Kconfig entry
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31382 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-20 16:50:16 +00:00
9e46a02d9f
cns21xx: remove 3.2 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31381 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-20 15:25:00 +00:00
97af2b28a2
cns21xx: switch to 3.3.2
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31380 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-20 15:24:59 +00:00
411745524b
cns21xx: add support for 3.3
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31379 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-20 15:24:57 +00:00
9d93fe6bd5
linux/3.3: update ARM mach-types
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31378 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-20 15:24:54 +00:00
faea581f6b
[generic] Add a missing symbol for config-3.3
...
Signed-off-by: Claudio Mignanti <c.mignanti@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31373 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-20 13:33:04 +00:00
29dc558583
[at91] Reorganize the subtargets, group subtargets per cpu family
...
Signed-off-by: Claudio Mignanti <c.mignanti@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31372 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-20 13:33:01 +00:00
50d492059a
[at91] Update the kernel to 3.3.x series, remove patches that doesn't apply anymore
...
Signed-off-by: Claudio Mignanti <c.mignanti@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31371 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-20 13:32:55 +00:00
6b6d6826b8
[at91] Ensure that the bin directory exists before copy the files
...
Signed-off-by: Claudio Mignanti <c.mignanti@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31370 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-20 13:27:16 +00:00
29681c7326
[kernel/2.6.30] remove some annoying warnings and fix snd modules build
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31365 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-20 13:25:26 +00:00
7d2e8e5419
[ps3] add missing config symbol
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31364 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-20 13:25:23 +00:00
d83124454a
ar71xx: nuke 3.2 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31360 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-19 21:32:05 +00:00
f41d93b307
ar71xx: switch to 3.3.2
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31359 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-19 21:31:58 +00:00
8f4fdc7ddd
ar71xx: sync 3.3 config
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31358 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-19 21:31:53 +00:00
8771edc108
ar71xx: merge/reorganize 3.3 patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31357 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-19 21:31:50 +00:00
fb5930b034
ar71xx: use ap91_pci_init for RB751{,G}
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31356 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-19 21:31:48 +00:00
00d3105923
ar71xx: move USB device registration directly into rb751{,g}_setup
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31355 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-19 21:31:43 +00:00
83531b059e
ar71xx: add ap9x_pci_get_wmac_data helper
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31354 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-19 21:31:42 +00:00
7ad3da40d6
ar71xx: add sanity checks to decode_rle
...
Also use -EINVAL instead of -1.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31353 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-19 21:31:40 +00:00
4af9045195
avr32: remove old kernel support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31352 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-19 21:23:07 +00:00
36fc8bed41
avr32: switch to 3.3.2
...
uClibc-0.9.33 causes segfaults at least in iptables.
The segfaults are present with 2.6.39 as well, so it
makes no sense to stick to that version.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31351 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-19 21:23:02 +00:00
962a7aa169
avr32: sync kernel config
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31350 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-19 21:22:50 +00:00
ea2bab28c3
avr32: fix atomic64_t related kernel build errors
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31349 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-19 21:22:48 +00:00
bf87c8d517
[cobalt] switch to 3.2.15
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31345 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-18 15:36:33 +00:00
9b0b00129d
[generic] fix 335-mips-kexec patch for all 3+ kernels
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31344 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-18 15:36:30 +00:00
fe3da331e9
kernel: x86: also update subtarget kernel versions
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31338 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-17 21:01:43 +00:00
7865291832
kernel: also update the targets to use 3.2.15
...
Thanks Gabor for spotting it.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31337 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-17 13:12:14 +00:00
afbf3d994e
kernel: update linux 3.3 to 3.3.2
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31336 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-17 12:51:02 +00:00
23578461a9
kernel: update linux 3.2 to 3.2.15
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31335 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-17 12:50:54 +00:00
d52ae4d7d3
[imagebuilder] don't overwrite version.mk, substitute REVISION instead
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31327 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-17 09:31:16 +00:00
adcde9f983
[geos] bump to Linux v3.3.1
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31314 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-16 15:04:47 +00:00
d68e222240
Fix bufferbloat in PPPoATM TX queue
...
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31313 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-16 15:04:45 +00:00
d6f68cb7ab
Update ppp TX restart patch to avoid race condition
...
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31312 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-16 15:04:44 +00:00
b9f03a5a14
[lantiq] adds 3.3 patches and files
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31307 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-16 12:31:48 +00:00
b9a5bae5fb
[kernel/2.6.32] backport missing platform data members for gpio-keys
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31306 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-16 12:09:15 +00:00
28c078fca1
[kernel/2.6.32] backport a missing eeprom 93cx6 define for building rt2x00
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31305 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-16 12:09:13 +00:00
08e01218a1
[rdc] add missing debugging symbols
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31302 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-16 11:38:35 +00:00
f190612c75
[kernel/2.6.32] add missing debugging symbols
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31301 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-16 11:38:33 +00:00
2a99ce8eee
[rb532] mark set but unused variables as such
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31296 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-15 18:53:48 +00:00
5c37e54b6a
[rb532] refresh 2.6.32 patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31295 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-15 18:53:45 +00:00
02031b4e0c
[rdc] refresh 2.6.32 patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31294 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-15 18:53:42 +00:00
0d16a54698
[generic/2.6.32] silence an annoying x86 warning
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31293 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-15 18:53:39 +00:00
9ce5247c0b
at91: Missing kernel config symbols for AT91 target platform
...
I looked into buildbot snapshots and noticed that some platforms have
not successfully compiled for a long time. One example is at91, which
seems to be missing device-related kernel config symbols and the
snapshot build crashes already there.
Please find attached a patch that makes the at91 kernel config and
build to succeed again.
Signed off by: hannu.nyman@iki.fi
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31288 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-15 09:50:51 +00:00
3210600078
brcm47xx: fix a bug in the sprom handling of bcma, this broke all bcma based SoCs.
...
bcma: use fallback sprom if no on chip sprom is available
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31285 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-14 12:12:22 +00:00
0bc45f5787
kernel: refresh patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31279 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-13 19:37:15 +00:00
5af062a0e0
kernel: update bcma and ssb to version master-2012-04-12 from wireless-testing
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31278 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-13 19:35:40 +00:00
a0c04f8b93
brcm47xx: remove support for kernel 3.0
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31276 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-13 16:53:16 +00:00
6c5b78fae5
ixp4xx: add support for linux 3.3.1
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31275 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-13 13:38:49 +00:00
d275344c3e
kernel: fix arm compressed images build on mac os x
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31274 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-13 13:38:45 +00:00
903019e50d
[sdk] don't overwrite version.mk, substitute REVISION instead
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31271 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-13 10:47:45 +00:00
b4b7a17e19
PATCH: Disable console terminal in Grub for alix2 target
...
The alix2 target has the VGA console for grub enabled by default. This
prevents the grub menu from appearing on bootup. It is disabled by
default for the other embedded x86 platforms. This patch corrects that
behavior for the alix2 target.
Signed-off-by: Adam Gensler <openwrt@kristenandadam.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31270 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-12 23:30:27 +00:00
81efe748e3
[imagebuilder] populate repositories.conf from version.mk
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31268 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-12 23:08:13 +00:00
37a565ab65
[lantiq] update 3.2 patches
...
sync with lantiq kernel series
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31260 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-12 12:33:56 +00:00
d139f87eb9
[omap35xx] remove preconfig variables
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31257 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-12 09:43:43 +00:00
8447143390
[ps3] remove preconfig variables
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31256 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-12 09:43:41 +00:00
accb414b59
[x86] add missing Kernel symbol spotted by buildbot
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31232 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-10 10:09:27 +00:00
5223166450
[generic/3.3]: add missing symbols
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31231 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-09 17:03:02 +00:00
6ea1895fc3
kernel: update linux 3.3 to 3.3.1
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31223 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-09 14:48:56 +00:00
fe073513d5
kernel: update linux 3.2 to 3.2.14
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31222 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-09 14:48:51 +00:00
a0bbe7df3b
kernel: add some more additional missing config symbols for 3.2 and 3.3
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31221 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-09 14:48:46 +00:00
377233f931
[target/xburst] level up target xburst to linux kernel version 3.2.1
...
Thanks to the qi-hardware project - especially to Lars, Maarten and Xiangfu
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31218 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-08 12:09:52 +00:00
571d6c4766
ar71xx: image: build initramfs images for the WHR boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31209 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-06 06:45:08 +00:00
ff6417252a
ar71xx: initial support for Mikrotik RB751G-2HnD and RB751U-2HnD
...
Great collaboration on these two fantastic routers on the openwrt forum:
https://forum.openwrt.org/viewtopic.php?id=32320
Above all kudos to aryufan. Well done and thank you everyone else who
contributed.
To-Do: LED for wlan is not yet activated
To-Do: TxPower over 20dBm (RB751U) or 22dBm (RB751G) are not accepted by
the router
Signed-off-by: Hanno Schupp <hanno.schupp@gmail.com>
[juhosg: fix line wrapped patch, fix checkpatch errors, add missing
kernel patches]
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31208 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-06 06:45:07 +00:00
4442cefd05
ar71xx: add rb750 to diag.sh
...
Support status led in diag.sh for RB750
Patch from: Evangelos Arkalis <arkalis.e@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31207 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-06 06:45:04 +00:00
b01dd0668d
[lantiq] add Easybox 802 - ARV752DPW
...
Implements the ARV752DPW architecture in mach-arv.c
Signed-off-by: Christian Rustmeier <rustmeier@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31206 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-05 20:03:21 +00:00
9a4f59ca97
[lantiq] enable usb on dgn3500
...
A power-enable toggle gpio is not available, it is always on and protected with a resettable fuse.
Signed-off-by: Pieter Voorthuijsen<p.voorthuijsen at gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31205 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-05 20:03:19 +00:00
896063471e
[orion] generic: use magic_long in sysupgrade
...
Signed-off-by: Matthias Bücher <mail@maddes.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31200 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-04 16:06:29 +00:00
69d74cf63c
[orion] update wrt350nv2-builder to v2.4 and use new functionality for target orion_generic
...
Signed-off-by: Matthias Bücher <mail@maddes.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31199 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-04 16:06:25 +00:00
e725f46aee
[orion] add support for D-Link DNS-323
...
this patch adds support for D-Link DNS323 storage device.
You can find more info here:
http://dns323.lukaperkov.net/
Currently you need serial cable to flash OpenWrt on DNS-323.
Signed-off-by: Luka Perkov < openwrt ->-to->- lukaperkov.net >
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31198 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-04 15:53:55 +00:00
a48aa01fce
[kernel/3+] add missing DM/MD config symbols
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31197 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-04 15:53:52 +00:00
4425b61ca1
[adm5120] fix typos in adm5120 switch driver ( #4241 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31196 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-04 15:53:15 +00:00
aa051d5768
[adm5120] add Edimax specific MAGIC_MAC_BASE to read MAC from flash ( #4241 ]
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31195 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-04 15:53:12 +00:00
f138dae1bf
[adm5120] fix support for 2.6.38 kernel
...
This patch fixes the following issues I encountered while compiling kernel 2.6.38.8 for my Omnima Embedded Controller/Edimax BR6104KP:
- kernel comes up with machine selection during build, even though everything was properly set in menuconfig
- USB api changes
Successfully built and tested with r29755.
Signed-off-by: Hartmut Knaack <knaack.h [at] gmx.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31194 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-04 15:53:09 +00:00
f0be53cc9b
[adm5120] refresh 2.6.38 patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31193 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-04 15:53:07 +00:00
e51b195041
[kernel/2.6.38] fix gcc-4.6 set but unused warnings
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31192 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-04 15:53:04 +00:00
f693d3ffd8
[kernel/2.6.38] refresh patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31191 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-04 15:53:01 +00:00
d944e45d65
kernel: update linux 3.2 to 3.2.13 and refresh patches
...
Also remove a duplicate patch from lantiq (already in generic).
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31158 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-01 07:56:55 +00:00
49fec54fec
kernel: add some more missing kernel symbols for 3.2 and 3.3
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31157 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-01 07:56:49 +00:00
04be726d5c
kernel: add some more missing serial 8250 config symbols
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31149 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-30 08:11:01 +00:00
2f2034752c
ramips: add support for the ARC FreeStation5 board, also fix WCR-150GN network setup while we're at it - thanks Pau Escrich <p4u@dabax.net> for the implementation
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31144 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-29 16:03:04 +00:00
88b3c3aad1
brcm47xx: fix memory leak, backport from the mainline kernel
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31143 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-29 15:44:06 +00:00
e0329692de
brcm47xx: add missing breaks into the nvram read code in the switch case statements
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31142 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-29 15:43:16 +00:00
6f8b023b69
kernel: restore ebtables functionality by running netfilter hooks when the ebtables module is loaded
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31141 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-29 14:15:54 +00:00
4e77771341
bcm63xx: enable bcm6368 for linux 3.3 and build images
...
Only build bcm6368 images when building for linux 3.3.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31133 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-28 20:42:37 +00:00
f60e4f7459
bcm63xx: add initial support for bcm6368 boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31132 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-28 20:42:34 +00:00
d569a898ab
bcm63xx: add driver for the internal hw trng on bcm6368
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31131 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-28 20:42:30 +00:00
37d45e311b
bcm63xx: replace SPI driver with latest upstream version
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31130 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-28 20:42:25 +00:00
9daebe4304
bcm63xx: add ethernet support for bcm6368
...
Add basic support for the internal ethernet switch on bcm6368. It behaves
as a dumb switch for now, but allows basic connectivity.
Also drop the ethernet patch for bcm6345 for now, it needs rework.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31129 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-28 20:42:20 +00:00
8dc562dfaa
bcm63xx: add missing bits from extirq support
...
Add missing external IRQ code parts for older chips in the new code.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31128 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-28 20:42:15 +00:00
f6e63fd141
bcm63xx: reorder patches
...
Reorder patches for a clearer distinction between the purposes of
the different patches.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31127 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-28 20:42:09 +00:00
145aa980fe
brcm47xx: update flash drivers
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31126 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-28 17:03:18 +00:00
3723f7813f
Revert commit 31091 - "[target/xburst] remove set but unused variable which leads into compiling errors with GCC >= 4.6.0"
...
'set-but-unused-variable'-issues are dealt with in a generic way now
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31124 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-28 15:28:21 +00:00
c09389a8ac
[target/generic] deal with 'set-but-unused-variables' in a more generic way
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31123 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-28 15:28:13 +00:00
68b4dc5583
brcm47xx: BCMA - Consolidate/reduce code in bcma_device_name
...
Eliminate unneeded procedure by incorporating code into bcma_device_name
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31120 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-28 09:36:50 +00:00
15384e2608
brcm47xx: BCMA - Always map 4 bytes
...
This probably doesn't matter, but reads/writes are always 4 bytes, so always map 4 bytes.
Changes since v1: Moved changes to new patch file (234-bcma-always-map-4-bytes.patch).
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31119 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-28 09:35:01 +00:00
25cb8f3f4f
ar71xx: boost SPI flash read performance
...
mtd_speedtest results:
page read speed
old new delta
DB120 929 KiB/s 2597 KiB/s +179.55%
TL-WR1043ND v1 754 KiB/s 2166 KiB/s +187.27%
TL-WR703N v1 745 KiB/s 2176 KiB/s +192.08%
TL-MR3220 v1 752 KiB/s 2154 KiB/s +186.44%
TL-WR2543ND v1 564 KiB/s 2130 KiB/s +277.66%
TL-WR741ND v2 525 KiB/s 1767 KiB/s +236.57%
ALFA-AP96 702 KiB/s 1977 KiB/s +181.62%
WNDR3700 697 KiB/s 1965 KiB/s +181.92%
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31118 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 19:38:17 +00:00
7466fa47e4
ar71xx: improve SPI flash read/write performance
...
mtd_speedtest results:
page write speed
old new delta
DB120 209 KiB/s 226 KiB/s +8.13%
TL-WR1043ND v1 122 KiB/s 148 KiB/s +21.31%
TL-WR703N v1 153 KiB/s 194 KiB/s +26.80%
TL-MR3220 v1 130 KiB/s 156 KiB/s +20.00%
TL-WR2543ND v1 158 KiB/s 202 KiB/s +27.85%
TL-WR741ND v2 122 KiB/s 152 KiB/s +24.59%
ALFA AP96 229 KiB/s 260 KiB/s +13.54%
WNDR3700 202 KiB/s 223 KiB/s +10.40%
page read speed
old new delta
DB120 691 KiB/s 929 KiB/s +34.44%
TL-WR1043ND v1 372 KiB/s 754 KiB/s +102.69%
TL-WR703N v1 375 KiB/s 745 KiB/s +98.67%
TL-MR3220 v1 372 KiB/s 752 KiB/s +102.15%
TL-WR2543ND v1 307 KiB/s 564 KiB/s +83.71%
TL-WR741ND v2 315 KiB/s 525 KiB/s +66.67%
ALFA AP96 515 KiB/s 702 KiB/s +36.31%
WNDR3700 515 KiB/s 697 KiB/s +35.34%
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31117 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 19:38:15 +00:00
2082a166ec
ar71xx: image: build initramfs images for more boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31116 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 19:38:13 +00:00
4251611f6f
ar71xx: image: add MkuImage{Gzip,Lzma}/initramfs helpers
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31115 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 19:38:11 +00:00
2f5d4465f9
ar71xx: image: pass mtdlayout variables by value
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31114 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 19:38:10 +00:00
a25b939eac
ar71xx: image: use MkuImageGzip in Image/Build/AthGzip/initramfs
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31113 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 19:38:08 +00:00
bc6cbb5644
ar71xx: remove the built-in MTD map of the AP96 board
...
Pass the mtd_layout via the kernel command line instead.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31112 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 19:38:07 +00:00
35c72f864e
ar71xx: remove the built-in MTD map of the PB92 board
...
Pass the mtd_layout via the kernel command line instead
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31111 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 19:38:05 +00:00
1f4578115c
ar71xx: remove the built-in MTD map of the Zcomax devices
...
Pass the mtd_layout via the kernel command line instead.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31110 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 19:38:04 +00:00
8aca9f5db2
ar71xx: reclaim the 'user_property' partition on WHR-* boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31109 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 19:38:02 +00:00
ba06bbe662
ar71xx: remove the built-in MTD maps of several boards
...
We are passing the MTD layout via the kernel command line, so
it makes no sense to duplicate it in mach-* files. The patch
removes the built-in MTD maps of the following boards:
* AP113
* ALFA N2/N5
* DIR-600
* DIR-615
* DIR-825
* TEW-6{3,5}2BRP
* TEW-673GRU
* WHR-G301N
* WHR-HP-GN
* WHR-HP-G300N
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31108 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 19:38:01 +00:00
41b5fcad6d
ar71xx: use modules for LED triggers
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31107 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 19:37:59 +00:00
b5219fd99f
ar71xx: disable CONFIG_{I2C,SPI}_GPIO
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31104 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 19:37:53 +00:00
db52ced806
ar71xx: sync 3.3 config
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31103 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 19:37:52 +00:00
c80db28b91
ar71xx: fix button polarity on TL-WR703N and TL-WR741N v4
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31102 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 19:37:51 +00:00
b84abd65c9
ramips: rt305x: build image for the DIR-615 rev D boards
...
Patch from #10105 .
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31101 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 19:29:59 +00:00
18072ef4cf
ramips: rt305x: add add support for the Asus WL-330N board
...
[juhosg: reorder several lines in order to keep things sorted
alphabetically]
Signed-off-by: Frédéric Leroy <fredo@starox.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31100 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 19:29:57 +00:00
518a921f7c
[generic] ppp: Fix high softirq utilization with pppoa
...
Users of the Geos platform are reporting high CPU utilization.
This seems to be rooted in a problem with the TX queue restart in PPP.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31096 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 17:47:44 +00:00
8e8496c2ee
[kernel/3.3] add missing INET_UDP_DIAG symbol
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31095 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 17:47:41 +00:00
3bd1bf8e4a
[x86] geos: add 'tc' and kmod-sched for bonding
...
The Geos2 includes 2 ADSL+ interfaces, and as such it needs to have the TEQL scheduler for bonding.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31094 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 17:47:37 +00:00
e4caa064ac
brcm47xx: update sprom patches like they are in the mainline kernel
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31093 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 17:07:28 +00:00
e1b38bfcc1
[target/xburst] remove set but unused variable which leads into compiling errors with GCC >= 4.6.0
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31091 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 16:29:19 +00:00
40620c4915
brcm47xx: update usb driver to the version send for mainline kernel integartion
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31089 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 15:38:56 +00:00
edba77a97d
ath9k: make endian check optional
...
Turns out it triggers on some AR71xx devices where no swapping should be done.
Enable endian check for the lantiq target.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31084 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 13:21:53 +00:00
03f8b1d159
[lantiq] cleanup atheros wifi handling
...
Signed-off-by: Andrej Vlašić <andrej.vlasic0@gmail.com>
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31064 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-25 08:50:38 +00:00
eef8a1999f
[lantiq] cleanup image makefile
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31063 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-25 08:50:32 +00:00
533e67258b
[lantiq] update /etc/uci-defaults/*
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31062 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-25 08:50:30 +00:00
f7ce6d56ca
[lantiq] update profiles
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31061 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-25 08:50:27 +00:00
62692a5350
[lantiq] bump kernel to 3.2.12
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31060 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-25 08:50:09 +00:00
ea1c8334d9
[ar8216] fixes breakage introduced in 776722ce36ac95877efb7fd771dde2f6ffc96433
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31054 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-22 13:07:34 +00:00
28705f9335
Disable keyboard for x86 default config - revoke patch 30966
...
This was already fixed by commit 30309 and is part of generic x86 target.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31052 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-21 19:10:02 +00:00
3381cc597a
linux: refresh patches against 3.3
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31047 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-20 15:55:07 +00:00
044147a3ec
linux/3.{2,3}: yet another missing NET_VENDOR symbol
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31045 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-20 15:55:04 +00:00
6c6f00cc24
ar71xx: fix IRQ number for the AR7240 OHCI controller
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31044 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-20 15:02:48 +00:00
af97c52933
[rdc] base-files: gracefully handle empty variables in preinit ( #11155 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31030 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-19 20:37:12 +00:00
81de1500bc
kernel: update linux 3.2 to 3.2.12
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31028 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-19 18:23:31 +00:00
adf7b3da44
ar71xx: disable unused file system drivers in the nand subtarget
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31027 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-19 15:57:07 +00:00
9d7ffb3b5d
ar71xx: sync kernel configs
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31026 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-19 15:57:06 +00:00
935d0cf7fe
ar71xx: add initial support for RB750GL
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31025 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-19 15:57:04 +00:00
fcb6507f7b
ar71xx: make rb750_latch_change 'static void'
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31024 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-19 15:57:03 +00:00
dbf4111ad7
ar71xx: add latch_change field to rb750_led_platform_data
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31023 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-19 15:57:01 +00:00
c0a33c12b0
ar71xx: add platform data for the RB750 NAND driver
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31022 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-19 15:56:59 +00:00
9c96cf36f5
[ppc44x]: upgrade to 3.2, disable ppp by default until we figure out why ppp_generic breaks bootup
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31020 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-19 11:27:34 +00:00
c56b757f1d
[generic]: add missing Kconfig symbols
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31019 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-19 11:26:15 +00:00
75ef6719a4
ar71xx: use a different pll value on DB120
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31018 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-19 11:11:22 +00:00
c6fb886b40
ar71xx: add AR934x specific interface speed setup for ge0
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31017 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-19 11:11:20 +00:00
036f98bb27
ar71xx: remove static MTD maps from AP121/DB120 boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31016 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-19 11:11:19 +00:00
887c0ecd98
targets: replace madwifi in profiles with ath5k, madwifi is unmaintained
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31015 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-19 09:58:13 +00:00
29ab3f288b
ar71xx: use AR8327 on the DB120 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31012 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-18 22:06:58 +00:00
69e2e9c108
generic: ar8216: add support for the AR8327 chip
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31011 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-18 22:06:55 +00:00
baeb3db74d
generic: ar8216: allow to use more ports
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31010 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-18 22:06:51 +00:00
998ee8cbbc
generic: ar8216: reorder chip specific functions
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31009 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-18 22:06:48 +00:00
16e8051306
generic: ar8216: reorder switch_dev specific functions
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31008 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-18 22:06:45 +00:00
8213a8e8f5
generic: ar8216: use ar8216_sw_ prefix for switchdev related functions
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31007 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-18 22:06:42 +00:00
71f7596c79
generic: ar8216: use switch_dev->ports in for loops
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31006 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-18 22:06:40 +00:00
e616b588f8
generic: ar8216: add read_port_status field to ar8xxx_chip
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31005 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-18 22:06:39 +00:00
44eec652f1
generic: ar8216: add init_globals field to ar8xxx_chip
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31004 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-18 22:06:36 +00:00
3b2249677c
generic: ar8216: add caps field to ar8xxx_chip
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31003 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-18 22:06:33 +00:00
959df6a165
generic: ar8216: add vtu_load_vlan field to ar8xxx_chip
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31002 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-18 22:06:30 +00:00
071a509f67
generic: ar8216: add vtu_flush field to ar8xxx_chip
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31001 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-18 22:06:26 +00:00
0d1a31938c
generic: ar8216: add init_port field to ar8xxx_chip
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31000 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-18 22:06:23 +00:00
d52cff00a4
generic: ar8216: add setup_port field to ar8xxx_chip
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30999 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-18 22:06:19 +00:00
ea9e2d7fb2
generic: ar8216: add hw_init field to ar8xxx_chip
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30998 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-18 22:06:15 +00:00
3a4a231982
generic: ar8216: add a separate structure for chip specific stuff
...
Also add a hw_init function into that.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30997 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-18 22:06:12 +00:00
595d1849e5
generic: ar8216: rename chip field of struct ar8216
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30996 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-18 22:06:08 +00:00
baee093c4e
generic: ar8216: move ar8216_id_chip function
...
Also remove the inline annotation.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30995 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-18 22:06:05 +00:00
e4682f031a
generic: ar8216: rename ar8216_ops to ar8216_sw_ops
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30994 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-18 22:06:03 +00:00
0cc006ea1c
[x86] alix2: add require crypto kmods ( #10410 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30980 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-18 18:56:02 +00:00
a7ccf18c14
cns21xx: build uImage for the NS-K330
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30974 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-18 12:07:56 +00:00
eba873061b
cns21xx: remove 2.6.3x support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30973 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-18 12:07:51 +00:00
73a67f4e8d
cns21xx: switch to 3.2.9
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30972 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-18 12:07:50 +00:00
0c57b065fb
cns21xx: add support for 3.2
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30971 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-18 12:07:48 +00:00
ff7240ed2b
Enable keyboard for x86
...
This is required for qemu like descripted in
here http://wiki.openwrt.org/doc/howto/qemu
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30966 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-17 21:32:08 +00:00
7fd4ed413f
kernel: improve profiling support, keep static symbols when profiling is enabled
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30964 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-17 13:03:14 +00:00
e45b55e6c1
[uml] remove support for old kernels
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30963 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-17 11:55:59 +00:00
88c3bb3c95
[uml] switch to 3.2
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30962 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-17 11:55:56 +00:00
8fe63af962
[uml] add support for 3.2
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30961 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-17 11:55:53 +00:00
3aa9d6bd64
[kernel/3.2] add some more missing symbols
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30960 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-17 11:55:49 +00:00
902c08b7e6
ar71xx: add profile and generate image for the JA76PF2 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30958 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-16 18:00:40 +00:00
b1fb73bd2f
ar71xx: add support for the jjPlus JA76PF2 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30957 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-16 18:00:34 +00:00
a9e99d72ea
ar71xx: change LED name prefix on the jjplus boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30956 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-16 18:00:26 +00:00
029ade3805
mpc52xx: switch to 3.2.9
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30955 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-16 15:35:00 +00:00
8fb4a3381e
kernel: optimize out remaining netfilter hooks in the bridging code if bridge filtering is disabled
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30954 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-16 09:21:59 +00:00
a86e95542d
swconfig: use a mutex instead of a spinlock, many swconfig calls sleep
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30952 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-15 19:32:31 +00:00
531638e839
ar8216: fix a MTU related regression
...
Switch reset on AR8316 appears to clobber the MTU configuration register
and possibly other global config registers. Move global configuration
register init writes back to the reset callback.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30951 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-15 16:57:27 +00:00
6189648864
ar71xx: move micrel PHY driver to the generic linux target
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30946 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-15 09:25:53 +00:00
9af0d919e6
linux/3.3: build mdio_register_board_info into the kernel if PHYLIB is selected
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30945 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-15 09:25:49 +00:00
a1c1818142
linux/3.2: build mdio_register_board_info into the kernel if PHYLIB is selected
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30944 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-15 09:25:47 +00:00
7571b64ce8
brcm47xx: add support for NAND flash on devices using bcma
...
This patch add support for the NAND flash on BCM5357 based devices like the WNR3500Lv2.
Thank you Tathagata Das <tathagata@alumnux.com> for the patch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30943 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-14 22:59:39 +00:00
316189c9ac
brcm47xx: move and rename the patches
...
The patches are now grouped by the part what they are doing and are using three digest numbers.
This does not remove or adds anything
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30942 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-14 21:48:23 +00:00
a93230e202
lantiq: load dwc_otg early
...
Needed for using external rootfs on usb sticks.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30940 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-14 10:59:52 +00:00
72f225874b
generic: ar8216: merge multiple if statements in ar8216_hw_apply
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30928 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-13 17:33:12 +00:00
432108e415
imagebuilder: fix parallel building ( closes #11117 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30927 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-13 17:29:40 +00:00
8e0414c16a
ar71xx: ag71xx: fix ARP frame reception on AR934x switch ports
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30926 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-13 17:29:38 +00:00
90579991ee
ar71xx: ag71xx: start aneg on switch PHYs after reset
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30925 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-13 17:29:37 +00:00
16cf112d8c
ar71xx: ag71xx: poll PHY status of all available switch ports
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30924 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-13 17:29:36 +00:00
4e4e7aeec4
ar71xx: ag71xx: allow to use port 5 of the AR934x built-in switch
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30923 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-13 17:29:34 +00:00
011e043746
ar71xx: reset the switch on AR934x before ethernet device registration
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30922 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-13 17:29:33 +00:00
14f91a5fd5
ar71xx: fix a typo in ar71xx_regs.h
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30921 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-13 17:29:31 +00:00
3815238ec6
[brcm63xx] remove udc patch since it is unused
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30920 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-13 14:06:44 +00:00
f00c73f3c5
kernel: bypass all netfilter hooks if the sysctls for that functionality have been disabled - eliminates the overhead of enabling CONFIG_BRIDGE_NETFILTER in the kernel config
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30917 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-13 10:06:45 +00:00
068199dde5
ar71xx: use a dummy callback for interfaces with fixed speed
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30913 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-12 20:38:58 +00:00
caae34337e
ar71xx: merge ar934x_bo_ddr_flush patch
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30912 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-12 20:38:57 +00:00
b169293875
ar71xx: enable UART function for early_printk/console
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30909 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-12 17:32:39 +00:00
3b5159b828
linux/3.3: refresh patches against 3.3-rc7
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30908 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-12 17:32:38 +00:00
47df086d3a
ramips: rt305x: add profile for the AZtech HW-5503G board
...
Patch from #11085 .
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30907 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-12 17:29:06 +00:00
04635421a3
linux/3.3: allow to set platform_data for phy devices
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30906 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-12 16:28:01 +00:00
4c0838a16c
linux/3.2: allow to set platform_data for phy devices
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30905 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-12 16:28:00 +00:00
c74d354787
linux/3.3: add missing config symbol
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30904 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-12 16:27:58 +00:00
7325c957ad
ar71xx: remove a 3.3 patch, it is already in 3.3-rc7
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30903 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-12 16:27:57 +00:00
4d821bdfe2
ar71xx: fix Compex WPE72 detection
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30902 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-12 16:27:56 +00:00
cf75824379
ramips: add RT3350 detection
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30900 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-12 16:12:13 +00:00
0da5eba57b
[generic] expose CONFIG_NETFILTER_NETLINK for external kmods
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30894 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-12 00:09:23 +00:00
0bc59f58e1
ramips: rt305x: rewrite SoC detection
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30890 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-11 19:05:59 +00:00
ec1e076734
ramips: rt305x: rename SYSTEM_CONFIG_* defines to RT305X_SYSCFG_*
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30889 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-11 19:05:57 +00:00
ea8fa1a9f1
ramips: replace RALINK_SOC_* macros with global variables
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30888 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-11 19:05:56 +00:00
ef72092022
ramips: introduce ramips_soc_prom_init and move SoC detection into that
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30887 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-11 19:05:53 +00:00
c1db1347f6
generic: ar8216: use usleep_range in ar8216_mii_{read,write}
...
msleep(1) can sleep for up to 20ms.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30885 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-11 17:19:14 +00:00
4769d71b06
generic: ar8216: add a helper function for writing PHY debug registers
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30884 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-11 16:49:35 +00:00
1fb98d5708
generic: ar8216: add lockep assertion to ar8216_rmw
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30883 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-11 16:49:33 +00:00
c853b6d0e6
ramips: build initramfs image for DIR-{3,6}00 boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30882 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-11 16:39:31 +00:00
b8e1185b0d
linux/3.3: show correct name for MIPS 24KEc in /proc/cpuinfo
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30881 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-11 16:39:30 +00:00
353b832bed
linux/3.2: show correct name for MIPS 24KEc in /proc/cpuinfo
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30880 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-11 16:39:28 +00:00
Felix Fietkau
Florian Fainelli
John Crispin
Luka Perkov
Jonas Gorski
Gabor Juhos
Hauke Mehrtens
Jo-Philipp Wich
Imre Kaloz
Claudio Mignanti
Mirko Vogt
Jens Muecke