kirkwood: nuke 2.6.37 support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31666 3c298f89-4303-0410-b956-a3cf2f4a3e73master
Gabor Juhos
parent
ceffa3f2e6
commit
805c1e8753
|
|
@ -1,153 +0,0 @@
|
|||
CONFIG_ALIGNMENT_TRAP=y
|
||||
CONFIG_ARCH_KIRKWOOD=y
|
||||
# CONFIG_ARCH_NUC93X is not set
|
||||
CONFIG_ARCH_REQUIRE_GPIOLIB=y
|
||||
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
|
||||
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
|
||||
# CONFIG_ARCH_SUPPORTS_MSI is not set
|
||||
CONFIG_ARCH_SUSPEND_POSSIBLE=y
|
||||
# CONFIG_ARCH_USES_GETTIMEOFFSET is not set
|
||||
CONFIG_ARM=y
|
||||
CONFIG_ARM_L1_CACHE_SHIFT=5
|
||||
# CONFIG_ARM_THUMB is not set
|
||||
# CONFIG_ARPD is not set
|
||||
CONFIG_BITREVERSE=y
|
||||
CONFIG_BLK_DEV_SD=y
|
||||
CONFIG_CACHE_FEROCEON_L2=y
|
||||
# CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH is not set
|
||||
CONFIG_CMDLINE="rootdelay=1 root=/dev/mmcblk0p1 noinitrd console=ttyS0,115200"
|
||||
CONFIG_CPU_32v5=y
|
||||
CONFIG_CPU_ABRT_EV5T=y
|
||||
CONFIG_CPU_CACHE_VIVT=y
|
||||
CONFIG_CPU_COPY_FEROCEON=y
|
||||
CONFIG_CPU_CP15=y
|
||||
CONFIG_CPU_CP15_MMU=y
|
||||
CONFIG_CPU_FEROCEON=y
|
||||
# CONFIG_CPU_FEROCEON_OLD_ID is not set
|
||||
# CONFIG_CPU_ICACHE_DISABLE is not set
|
||||
CONFIG_CPU_IDLE=y
|
||||
CONFIG_CPU_IDLE_GOV_LADDER=y
|
||||
CONFIG_CPU_PABRT_LEGACY=y
|
||||
CONFIG_CPU_TLB_FEROCEON=y
|
||||
CONFIG_DEBUG_KERNEL=y
|
||||
# CONFIG_DEBUG_USER is not set
|
||||
CONFIG_DECOMPRESS_LZMA=y
|
||||
CONFIG_DEVPORT=y
|
||||
# CONFIG_DLCI is not set
|
||||
# CONFIG_DM9000 is not set
|
||||
CONFIG_DNOTIFY=y
|
||||
CONFIG_EXT4_FS=y
|
||||
# CONFIG_FPE_FASTFPE is not set
|
||||
# CONFIG_FPE_NWFPE is not set
|
||||
CONFIG_FRAME_POINTER=y
|
||||
CONFIG_GENERIC_ATOMIC64=y
|
||||
CONFIG_GENERIC_CLOCKEVENTS=y
|
||||
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
|
||||
CONFIG_GENERIC_FIND_LAST_BIT=y
|
||||
CONFIG_GENERIC_GPIO=y
|
||||
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
|
||||
CONFIG_GPIOLIB=y
|
||||
# CONFIG_HAMRADIO is not set
|
||||
CONFIG_HARDIRQS_SW_RESEND=y
|
||||
CONFIG_HAS_DMA=y
|
||||
CONFIG_HAS_IOMEM=y
|
||||
CONFIG_HAS_IOPORT=y
|
||||
CONFIG_HAVE_AOUT=y
|
||||
CONFIG_HAVE_ARCH_KGDB=y
|
||||
CONFIG_HAVE_FUNCTION_TRACER=y
|
||||
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
|
||||
CONFIG_HAVE_IDE=y
|
||||
CONFIG_HAVE_KERNEL_GZIP=y
|
||||
CONFIG_HAVE_KERNEL_LZMA=y
|
||||
CONFIG_HAVE_KERNEL_LZO=y
|
||||
CONFIG_HAVE_KPROBES=y
|
||||
CONFIG_HAVE_KRETPROBES=y
|
||||
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
|
||||
CONFIG_HAVE_OPROFILE=y
|
||||
CONFIG_HAVE_PERF_EVENTS=y
|
||||
CONFIG_HAVE_PROC_CPU=y
|
||||
CONFIG_HW_RANDOM=y
|
||||
# CONFIG_I2C_MV64XXX is not set
|
||||
CONFIG_INET_LRO=y
|
||||
CONFIG_INITRAMFS_SOURCE=""
|
||||
# CONFIG_IP_ADVANCED_ROUTER is not set
|
||||
CONFIG_IP_PIMSM_V1=y
|
||||
CONFIG_IP_PIMSM_V2=y
|
||||
CONFIG_JBD=y
|
||||
CONFIG_LEDS_GPIO=y
|
||||
CONFIG_LEGACY_PTYS=y
|
||||
CONFIG_LEGACY_PTY_COUNT=256
|
||||
# CONFIG_MACH_D2NET_V2 is not set
|
||||
# CONFIG_MACH_DB88F6281_BP is not set
|
||||
CONFIG_MACH_DOCKSTAR=y
|
||||
# CONFIG_MACH_ESATA_SHEEVAPLUG is not set
|
||||
# CONFIG_MACH_GURUPLUG is not set
|
||||
CONFIG_MACH_ICONNECT=y
|
||||
# CONFIG_MACH_INETSPACE_V2 is not set
|
||||
# CONFIG_MACH_MV88F6281GTW_GE is not set
|
||||
# CONFIG_MACH_NET2BIG_V2 is not set
|
||||
# CONFIG_MACH_NET5BIG_V2 is not set
|
||||
# CONFIG_MACH_NETSPACE_MAX_V2 is not set
|
||||
# CONFIG_MACH_NETSPACE_V2 is not set
|
||||
CONFIG_MACH_OPENRD_BASE=y
|
||||
CONFIG_MACH_OPENRD_CLIENT=y
|
||||
# CONFIG_MACH_OPENRD_ULTIMATE is not set
|
||||
# CONFIG_MACH_RD88F6192_NAS is not set
|
||||
# CONFIG_MACH_RD88F6281 is not set
|
||||
CONFIG_MACH_SHEEVAPLUG=y
|
||||
# CONFIG_MACH_T5325 is not set
|
||||
# CONFIG_MACH_TS219 is not set
|
||||
# CONFIG_MACH_TS41X is not set
|
||||
CONFIG_MMC=y
|
||||
CONFIG_MMC_BLOCK=y
|
||||
CONFIG_MMC_MVSDIO=y
|
||||
# CONFIG_MMC_TIFM_SD is not set
|
||||
# CONFIG_MTD_CFI is not set
|
||||
CONFIG_MTD_CMDLINE_PARTS=y
|
||||
CONFIG_MTD_NAND=y
|
||||
CONFIG_MTD_NAND_ECC=y
|
||||
CONFIG_MTD_NAND_ORION=y
|
||||
# CONFIG_MTD_ROOTFS_ROOT_DEV is not set
|
||||
# CONFIG_MTD_ROOTFS_SPLIT is not set
|
||||
# CONFIG_MTD_SM_COMMON is not set
|
||||
CONFIG_MV643XX_ETH=y
|
||||
CONFIG_NEED_DMA_MAP_STATE=y
|
||||
CONFIG_NET_DSA=y
|
||||
# CONFIG_NET_DSA_MV88E6060 is not set
|
||||
# CONFIG_NET_DSA_MV88E6123_61_65 is not set
|
||||
CONFIG_NET_DSA_MV88E6131=y
|
||||
CONFIG_NET_DSA_MV88E6XXX=y
|
||||
CONFIG_NET_DSA_MV88E6XXX_NEED_PPU=y
|
||||
CONFIG_NET_DSA_TAG_DSA=y
|
||||
# CONFIG_NET_DSA_TAG_EDSA is not set
|
||||
# CONFIG_NET_DSA_TAG_TRAILER is not set
|
||||
CONFIG_NLS=y
|
||||
CONFIG_OUTER_CACHE=y
|
||||
CONFIG_PAGEFLAGS_EXTENDED=y
|
||||
CONFIG_PAGE_OFFSET=0xC0000000
|
||||
CONFIG_PCI=y
|
||||
CONFIG_PERF_USE_VMALLOC=y
|
||||
CONFIG_PHYLIB=y
|
||||
CONFIG_PLAT_ORION=y
|
||||
CONFIG_RTC_CLASS=y
|
||||
CONFIG_RTC_DRV_MV=y
|
||||
CONFIG_SCSI=y
|
||||
CONFIG_SCSI_MOD=y
|
||||
# CONFIG_SCSI_MULTI_LUN is not set
|
||||
# CONFIG_SDIO_UART is not set
|
||||
# CONFIG_SERIAL_8250_EXTENDED is not set
|
||||
CONFIG_SPLIT_PTLOCK_CPUS=999999
|
||||
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
|
||||
CONFIG_UID16=y
|
||||
CONFIG_USB=y
|
||||
CONFIG_USB_EHCI_HCD=y
|
||||
CONFIG_USB_STORAGE=y
|
||||
CONFIG_USB_SUPPORT=y
|
||||
# CONFIG_USB_UHCI_HCD is not set
|
||||
CONFIG_VECTORS_BASE=0xffff0000
|
||||
# CONFIG_VFP is not set
|
||||
CONFIG_VM_EVENT_COUNTERS=y
|
||||
CONFIG_WAN=y
|
||||
CONFIG_ZBOOT_ROM_BSS=0x0
|
||||
CONFIG_ZBOOT_ROM_TEXT=0x0
|
||||
CONFIG_ZONE_DMA_FLAG=0
|
||||
|
|
@ -1,11 +0,0 @@
|
|||
--- a/arch/arm/mach-kirkwood/sheevaplug-setup.c
|
||||
+++ b/arch/arm/mach-kirkwood/sheevaplug-setup.c
|
||||
@@ -33,7 +33,7 @@ static struct mtd_partition sheevaplug_n
|
||||
.offset = MTDPART_OFS_NXTBLK,
|
||||
.size = SZ_4M
|
||||
}, {
|
||||
- .name = "root",
|
||||
+ .name = "rootfs",
|
||||
.offset = MTDPART_OFS_NXTBLK,
|
||||
.size = MTDPART_SIZ_FULL
|
||||
},
|
||||
|
|
@ -1,32 +0,0 @@
|
|||
--- a/drivers/mmc/core/sd.c
|
||||
+++ b/drivers/mmc/core/sd.c
|
||||
@@ -332,6 +332,15 @@ int mmc_sd_switch_hs(struct mmc_card *ca
|
||||
return -ENOMEM;
|
||||
}
|
||||
|
||||
+ /*
|
||||
+ * Some SDHC cards, notably those with a Sandisk SD controller
|
||||
+ * (also found in Kingston products) need a bit of slack
|
||||
+ * before successfully handling the SWITCH command. So far,
|
||||
+ * cards identifying themselves as "SD04G" and "SD08G" are
|
||||
+ * affected
|
||||
+ */
|
||||
+ udelay(1000);
|
||||
+
|
||||
err = mmc_sd_switch(card, 1, 0, 1, status);
|
||||
if (err)
|
||||
goto out;
|
||||
--- a/drivers/mmc/core/core.c
|
||||
+++ b/drivers/mmc/core/core.c
|
||||
@@ -303,9 +303,9 @@ void mmc_set_data_timeout(struct mmc_dat
|
||||
* The limit is really 250 ms, but that is
|
||||
* insufficient for some crappy cards.
|
||||
*/
|
||||
- limit_us = 300000;
|
||||
+ limit_us = 500000;
|
||||
else
|
||||
- limit_us = 100000;
|
||||
+ limit_us = 200000;
|
||||
|
||||
/*
|
||||
* SDHC cards always use these fixed values.
|
||||
|
|
@ -1,226 +0,0 @@
|
|||
--- a/arch/arm/mach-kirkwood/Makefile
|
||||
+++ b/arch/arm/mach-kirkwood/Makefile
|
||||
@@ -8,6 +8,7 @@ obj-$(CONFIG_MACH_SHEEVAPLUG) += sheeva
|
||||
obj-$(CONFIG_MACH_ESATA_SHEEVAPLUG) += sheevaplug-setup.o
|
||||
obj-$(CONFIG_MACH_GURUPLUG) += guruplug-setup.o
|
||||
obj-$(CONFIG_MACH_DOCKSTAR) += dockstar-setup.o
|
||||
+obj-$(CONFIG_MACH_ICONNECT) += iconnect-setup.o
|
||||
obj-$(CONFIG_MACH_TS219) += ts219-setup.o tsx1x-common.o
|
||||
obj-$(CONFIG_MACH_TS41X) += ts41x-setup.o tsx1x-common.o
|
||||
obj-$(CONFIG_MACH_OPENRD) += openrd-setup.o
|
||||
--- a/arch/arm/mach-kirkwood/Kconfig
|
||||
+++ b/arch/arm/mach-kirkwood/Kconfig
|
||||
@@ -130,6 +130,12 @@ config MACH_T5325
|
||||
Say 'Y' here if you want your kernel to support the
|
||||
HP t5325 Thin Client.
|
||||
|
||||
+config MACH_ICONNECT
|
||||
+ bool "Iomega iConnect Wireless"
|
||||
+ help
|
||||
+ Say 'Y' here if you want your kernel to support the
|
||||
+ Iomega iConnect Wireless.
|
||||
+
|
||||
endmenu
|
||||
|
||||
endif
|
||||
--- a/arch/arm/mach-kirkwood/mpp.h
|
||||
+++ b/arch/arm/mach-kirkwood/mpp.h
|
||||
@@ -108,6 +108,7 @@
|
||||
#define MPP11_SATA0_ACTn MPP( 11, 0x5, 0, 1, 0, 1, 1, 1, 1 )
|
||||
|
||||
#define MPP12_GPO MPP( 12, 0x0, 0, 1, 1, 1, 1, 1, 1 )
|
||||
+#define MPP12_GPIO MPP( 12, 0x0, 1, 1, 1, 1, 1, 1, 1 )
|
||||
#define MPP12_SD_CLK MPP( 12, 0x1, 0, 1, 1, 1, 1, 1, 1 )
|
||||
#define MPP12_AU_SPDIF0 MPP( 12, 0xa, 0, 1, 0, 0, 0, 0, 1 )
|
||||
#define MPP12_SPI_MOSI MPP( 12, 0xb, 0, 1, 0, 0, 0, 0, 1 )
|
||||
--- /dev/null
|
||||
+++ b/arch/arm/mach-kirkwood/iconnect-setup.c
|
||||
@@ -0,0 +1,188 @@
|
||||
+/*
|
||||
+ * arch/arm/mach-kirkwood/iconnect-setup.c
|
||||
+ *
|
||||
+ * Iomega iConnect Wireless
|
||||
+ *
|
||||
+ * This file is licensed under the terms of the GNU General Public
|
||||
+ * License version 2. This program is licensed "as is" without any
|
||||
+ * warranty of any kind, whether express or implied.
|
||||
+ */
|
||||
+
|
||||
+#include <linux/kernel.h>
|
||||
+#include <linux/init.h>
|
||||
+#include <linux/platform_device.h>
|
||||
+#include <linux/irq.h>
|
||||
+#include <linux/mtd/partitions.h>
|
||||
+#include <linux/mv643xx_eth.h>
|
||||
+#include <linux/ethtool.h>
|
||||
+#include <linux/gpio.h>
|
||||
+#include <linux/gpio_keys.h>
|
||||
+#include <linux/input.h>
|
||||
+#include <linux/leds.h>
|
||||
+#include <asm/mach-types.h>
|
||||
+#include <asm/mach/arch.h>
|
||||
+#include <mach/kirkwood.h>
|
||||
+#include "common.h"
|
||||
+#include "mpp.h"
|
||||
+
|
||||
+static struct mtd_partition iconnect_nand_parts[] = {
|
||||
+ {
|
||||
+ .name = "u-boot",
|
||||
+ .offset = 0,
|
||||
+ .size = SZ_1M
|
||||
+ }, {
|
||||
+ .name = "uImage",
|
||||
+ .offset = MTDPART_OFS_NXTBLK,
|
||||
+ .size = SZ_1M + SZ_2M
|
||||
+ }, {
|
||||
+ .name = "rootfs",
|
||||
+ .offset = MTDPART_OFS_NXTBLK,
|
||||
+ .size = SZ_32M,
|
||||
+ }, {
|
||||
+ .name = "data",
|
||||
+ .offset = MTDPART_OFS_NXTBLK,
|
||||
+ .size = MTDPART_SIZ_FULL
|
||||
+ },
|
||||
+};
|
||||
+
|
||||
+static struct mv643xx_eth_platform_data iconnect_ge00_data = {
|
||||
+ .phy_addr = MV643XX_ETH_PHY_ADDR(11),
|
||||
+};
|
||||
+
|
||||
+static struct gpio_led iconnect_led_pins[] = {
|
||||
+ {
|
||||
+ .name = "iconnect:blue:power",
|
||||
+ .default_trigger = "default-on",
|
||||
+ .gpio = 42,
|
||||
+ },
|
||||
+ {
|
||||
+ .name = "iconnect:red:power",
|
||||
+ .gpio = 43,
|
||||
+ },
|
||||
+ {
|
||||
+ .name = "iconnect:blue:usb1",
|
||||
+ .gpio = 44,
|
||||
+ },
|
||||
+ {
|
||||
+ .name = "iconnect:blue:usb2",
|
||||
+ .gpio = 45,
|
||||
+ },
|
||||
+ {
|
||||
+ .name = "iconnect:blue:usb3",
|
||||
+ .gpio = 46,
|
||||
+ },
|
||||
+ {
|
||||
+ .name = "iconnect:blue:usb4",
|
||||
+ .gpio = 47,
|
||||
+ },
|
||||
+ {
|
||||
+ .name = "iconnect:blue:otb",
|
||||
+ .gpio = 48,
|
||||
+ },
|
||||
+};
|
||||
+
|
||||
+static struct gpio_led_platform_data iconnect_led_data = {
|
||||
+ .leds = iconnect_led_pins,
|
||||
+ .num_leds = ARRAY_SIZE(iconnect_led_pins),
|
||||
+};
|
||||
+
|
||||
+static struct platform_device iconnect_leds = {
|
||||
+ .name = "leds-gpio",
|
||||
+ .id = -1,
|
||||
+ .dev = {
|
||||
+ .platform_data = &iconnect_led_data,
|
||||
+ }
|
||||
+};
|
||||
+
|
||||
+#define ICONNECT_GPIO_KEY_RESET 12
|
||||
+#define ICONNECT_GPIO_KEY_OTB 35
|
||||
+
|
||||
+#define ICONNECT_SW_RESET 0x00
|
||||
+#define ICONNECT_SW_OTB 0x01
|
||||
+
|
||||
+static struct gpio_keys_button iconnect_buttons[] = {
|
||||
+ {
|
||||
+ .type = EV_SW,
|
||||
+ .code = ICONNECT_SW_RESET,
|
||||
+ .gpio = ICONNECT_GPIO_KEY_RESET,
|
||||
+ .desc = "Reset Button",
|
||||
+ .active_low = 1,
|
||||
+ .debounce_interval = 100,
|
||||
+ },
|
||||
+ {
|
||||
+ .type = EV_SW,
|
||||
+ .code = ICONNECT_SW_OTB,
|
||||
+ .gpio = ICONNECT_GPIO_KEY_OTB,
|
||||
+ .desc = "OTB Button",
|
||||
+ .active_low = 1,
|
||||
+ .debounce_interval = 100,
|
||||
+ },
|
||||
+};
|
||||
+
|
||||
+static struct gpio_keys_platform_data iconnect_button_data = {
|
||||
+ .buttons = iconnect_buttons,
|
||||
+ .nbuttons = ARRAY_SIZE(iconnect_buttons),
|
||||
+};
|
||||
+
|
||||
+static struct platform_device iconnect_button_device = {
|
||||
+ .name = "gpio-keys",
|
||||
+ .id = -1,
|
||||
+ .num_resources = 0,
|
||||
+ .dev = {
|
||||
+ .platform_data = &iconnect_button_data,
|
||||
+ },
|
||||
+};
|
||||
+
|
||||
+static unsigned int iconnect_mpp_config[] __initdata = {
|
||||
+ MPP12_GPIO, /*Input for reset button*/
|
||||
+ MPP35_GPIO, /*Input for OTB button*/
|
||||
+ MPP42_GPIO,
|
||||
+ MPP43_GPIO,
|
||||
+ MPP44_GPIO,
|
||||
+ MPP45_GPIO,
|
||||
+ MPP46_GPIO,
|
||||
+ MPP47_GPIO,
|
||||
+ MPP48_GPIO,
|
||||
+ 0
|
||||
+};
|
||||
+
|
||||
+static void __init iconnect_init(void)
|
||||
+{
|
||||
+ u32 dev, rev;
|
||||
+
|
||||
+ /*
|
||||
+ * Basic setup. Needs to be called early.
|
||||
+ */
|
||||
+ kirkwood_init();
|
||||
+ kirkwood_mpp_conf(iconnect_mpp_config);
|
||||
+
|
||||
+ kirkwood_nand_init(ARRAY_AND_SIZE(iconnect_nand_parts), 25);
|
||||
+ kirkwood_ehci_init();
|
||||
+
|
||||
+ kirkwood_ge00_init(&iconnect_ge00_data);
|
||||
+ kirkwood_pcie_id(&dev, &rev);
|
||||
+
|
||||
+ kirkwood_uart0_init();
|
||||
+ kirkwood_i2c_init();
|
||||
+
|
||||
+ platform_device_register(&iconnect_leds);
|
||||
+ platform_device_register(&iconnect_button_device);
|
||||
+}
|
||||
+
|
||||
+static int __init iconnect_pci_init(void)
|
||||
+{
|
||||
+ if (machine_is_iconnect())
|
||||
+ kirkwood_pcie_init(KW_PCIE0);
|
||||
+
|
||||
+ return 0;
|
||||
+}
|
||||
+subsys_initcall(iconnect_pci_init);
|
||||
+
|
||||
+
|
||||
+MACHINE_START(ICONNECT, "Iomega iConnect Wireless")
|
||||
+ .boot_params = 0x00000100,
|
||||
+ .init_machine = iconnect_init,
|
||||
+ .map_io = kirkwood_map_io,
|
||||
+ .init_irq = kirkwood_init_irq,
|
||||
+ .timer = &kirkwood_timer,
|
||||
+MACHINE_END
|
||||
Loading…
Reference in New Issue