hak5
/
wifipineapple-openwrt
mirror of https://github.com/hak5/wifipineapple-openwrt.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

ar71xx: add support for the TP-Link TL-WR1041N v2 board 

Patch-by: Vince Huang <axishero@foxmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31608 3c298f89-4303-0410-b956-a3cf2f4a3e73
master
Gabor Juhos 2012-05-05 17:02:35 +00:00
parent 9698031bec
commit b373fefee9
8 changed files with 212 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
target/linux/ar71xx/base-files/etc/diag.sh
View File

@ -112,6 +112,7 @@ get_status_led() {
tl-mr3420 | \
tl-wa901nd | \
tl-wa901nd-v2 | \
tl-wr1041n-v2 | \
tl-wr1043nd | \
tl-wr741nd | \
tl-wr741nd-v4 | \

3
target/linux/ar71xx/base-files/etc/uci-defaults/leds
View File

@ -188,7 +188,8 @@ tl-wr741nd-v4)
set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt"
;;
tl-wr941nd)
tl-wr941nd | \
tl-wr1041n-v2)
set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt"
;;

7
target/linux/ar71xx/base-files/etc/uci-defaults/network
View File

@ -89,6 +89,13 @@ ap113)
ucidef_add_switch_vlan "eth0" "2" "0t 2"
;;
tl-wr1041n-v2)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "eth0" "1" "1"
ucidef_add_switch_vlan "eth0" "1" "0t 2 3 4 5"
ucidef_add_switch_vlan "eth0" "2" "0t 1"
;;
tl-wr1043nd)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "rtl8366rb" "1" "1"

6
target/linux/ar71xx/base-files/lib/ar71xx.sh
View File

@ -97,6 +97,9 @@ tplink_board_detect() {
"094100"*)
model="TP-Link TL-WR941N/ND"
;;
"104100"*)
model="TP-Link TL-WR1041N/ND"
;;
"104300"*)
model="TP-Link TL-WR1043N/ND"
;;
@ -274,6 +277,9 @@ ar71xx_board_detect() {
*TEW-673GRU)
name="tew-673gru"
;;
*"TL-WR1041N v2")
name="tl-wr1041n-v2"
;;
*TL-WR1043ND)
name="tl-wr1043nd"
;;

1
target/linux/ar71xx/base-files/lib/upgrade/platform.sh
View File

@ -136,6 +136,7 @@ platform_check_image() {
tl-wr841n-v1 | \
tl-wr841n-v7 | \
tl-wr941nd | \
tl-wr1041n-v2 | \
tl-wr1043nd | \
tl-wr2543n)
[ "$magic" != "0100" ] && {

1
target/linux/ar71xx/config-3.3
View File

@ -57,6 +57,7 @@ CONFIG_ATH79_MACH_TL_MR3020=y
CONFIG_ATH79_MACH_TL_MR3X20=y
CONFIG_ATH79_MACH_TL_WA901ND=y
CONFIG_ATH79_MACH_TL_WA901ND_V2=y
CONFIG_ATH79_MACH_TL_WR1041N_V2=y
CONFIG_ATH79_MACH_TL_WR1043ND=y
CONFIG_ATH79_MACH_TL_WR2543N=y
CONFIG_ATH79_MACH_TL_WR703N=y

154
target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1041n-v2.c Normal file
View File

@ -0,0 +1,154 @@
/*
* TP-LINK TL-WR1041 v2 board support
*
* Copyright (C) 2010-2012 Gabor Juhos <juhosg@openwrt.org>
* Copyright (C) 2011-2012 Anan Huang <axishero@foxmail.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/pci.h>
#include <linux/phy.h>
#include <linux/platform_device.h>
#include <linux/ath9k_platform.h>
#include <linux/ar8216_platform.h>
#include <asm/mach-ath79/ar71xx_regs.h>
#include "common.h"
#include "dev-ap9x-pci.h"
#include "dev-eth.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#include "dev-m25p80.h"
#include "dev-spi.h"
#include "dev-wmac.h"
#include "machtypes.h"
#define TL_WR1041NV2_GPIO_BTN_RESET 14
#define TL_WR1041NV2_GPIO_LED_WPS 13
#define TL_WR1041NV2_GPIO_LED_WLAN 11
#define TL_WR1041NV2_GPIO_LED_SYSTEM 12
#define TL_WR1041NV2_KEYS_POLL_INTERVAL 20 /* msecs */
#define TL_WR1041NV2_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR1041NV2_KEYS_POLL_INTERVAL)
#define TL_WR1041NV2_PCIE_CALDATA_OFFSET 0x5000
static const char *tl_wr1041nv2_part_probes[] = {
"tp-link",
NULL,
};
static struct flash_platform_data tl_wr1041nv2_flash_data = {
.part_probes = tl_wr1041nv2_part_probes,
};
static struct gpio_led tl_wr1041nv2_leds_gpio[] __initdata = {
{
.name = "tp-link:green:system",
.gpio = TL_WR1041NV2_GPIO_LED_SYSTEM,
.active_low = 1,
}, {
.name = "tp-link:green:wps",
.gpio = TL_WR1041NV2_GPIO_LED_WPS,
.active_low = 1,
}, {
.name = "tp-link:green:wlan",
.gpio = TL_WR1041NV2_GPIO_LED_WLAN,
.active_low = 1,
}
};
static struct gpio_keys_button tl_wr1041nv2_gpio_keys[] __initdata = {
{
.desc = "reset",
.type = EV_KEY,
.code = KEY_RESTART,
.debounce_interval = TL_WR1041NV2_KEYS_DEBOUNCE_INTERVAL,
.gpio = TL_WR1041NV2_GPIO_BTN_RESET,
.active_low = 1,
}
};
static struct ar8327_pad_cfg db120_ar8327_pad0_cfg = {
.mode = AR8327_PAD_MAC_RGMII,
.txclk_delay_en = true,
.rxclk_delay_en = true,
.txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
};
static struct ar8327_platform_data db120_ar8327_data = {
.pad0_cfg = &db120_ar8327_pad0_cfg,
.cpuport_cfg = {
.force_link = 1,
.speed = AR8327_PORT_SPEED_1000,
.duplex = 1,
.txpause = 1,
.rxpause = 1,
}
};
static struct mdio_board_info db120_mdio0_info[] = {
{
.bus_id = "ag71xx-mdio.0",
.phy_addr = 0,
.platform_data = &db120_ar8327_data,
},
};
static void __init db120_gmac_setup(void)
{
void __iomem *base;
u32 t;
base = ioremap(AR934X_GMAC_BASE, AR934X_GMAC_SIZE);
t = __raw_readl(base + AR934X_GMAC_REG_ETH_CFG);
t &= ~(AR934X_ETH_CFG_RGMII_GMAC0 | AR934X_ETH_CFG_MII_GMAC0 |
AR934X_ETH_CFG_GMII_GMAC0 | AR934X_ETH_CFG_SW_ONLY_MODE);
t |= AR934X_ETH_CFG_RGMII_GMAC0 | AR934X_ETH_CFG_SW_ONLY_MODE;
__raw_writel(t, base + AR934X_GMAC_REG_ETH_CFG);
iounmap(base);
}
static void __init tl_wr1041nv2_setup(void)
{
u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
ath79_register_m25p80(&tl_wr1041nv2_flash_data);
ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr1041nv2_leds_gpio),
tl_wr1041nv2_leds_gpio);
ath79_register_gpio_keys_polled(-1, TL_WR1041NV2_KEYS_POLL_INTERVAL,
ARRAY_SIZE(tl_wr1041nv2_gpio_keys),
tl_wr1041nv2_gpio_keys);
ath79_register_wmac(ee, mac);
db120_gmac_setup();
ath79_register_mdio(1, 0x0);
ath79_register_mdio(0, 0x0);
ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
mdiobus_register_board_info(db120_mdio0_info,
ARRAY_SIZE(db120_mdio0_info));
/* GMAC0 is connected to an AR8327 switch */
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ath79_eth0_data.phy_mask = BIT(0);
ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
ath79_eth0_pll_data.pll_1000 = 0x06000000;
ath79_register_eth(0);
}
MIPS_MACHINE(ATH79_MACH_TL_WR1041N_V2, "TL-WR1041N-v2",
"TP-LINK TL-WR1041N v2", tl_wr1041nv2_setup);

40
target/linux/ar71xx/patches-3.3/615-MIPS-ath79-WR1041N-support.patch Normal file
View File

@ -0,0 +1,40 @@
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -451,6 +451,17 @@ config ATH79_MACH_TL_WR941ND
select ATH79_DEV_M25P80
select ATH79_DEV_WMAC
+config ATH79_MACH_TL_WR1041N_V2
+ bool "TP-LINK TL-WR1041N v2 support"
+ select SOC_AR934X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
config ATH79_MACH_TL_WR1043ND
bool "TP-LINK TL-WR1043ND support"
select SOC_AR913X
--- a/arch/mips/ath79/machtypes.h
+++ b/arch/mips/ath79/machtypes.h
@@ -64,6 +64,7 @@ enum ath79_mach_type {
ATH79_MACH_TL_MR3420, /* TP-LINK TL-MR3420 */
ATH79_MACH_TL_WA901ND, /* TP-LINK TL-WA901ND */
ATH79_MACH_TL_WA901ND_V2, /* TP-LINK TL-WA901ND v2 */
+ ATH79_MACH_TL_WR1041N_V2, /* TP-LINK TL-WR1041N v2 */
ATH79_MACH_TL_WR1043ND, /* TP-LINK TL-WR1041ND */
ATH79_MACH_TL_WR2543N, /* TP-LINK TL-WR2543N/ND */
ATH79_MACH_TL_WR703N, /* TP-LINK TL-WR703N */
--- a/arch/mips/ath79/Makefile
+++ b/arch/mips/ath79/Makefile
@@ -74,6 +74,7 @@ obj-$(CONFIG_ATH79_MACH_TL_WR741ND) += m
obj-$(CONFIG_ATH79_MACH_TL_WR741ND_V4) += mach-tl-wr741nd-v4.o
obj-$(CONFIG_ATH79_MACH_TL_WR841N_V1) += mach-tl-wr841n.o
obj-$(CONFIG_ATH79_MACH_TL_WR941ND) += mach-tl-wr941nd.o
+obj-$(CONFIG_ATH79_MACH_TL_WR1041N_V2) += mach-tl-wr1041n-v2.o
obj-$(CONFIG_ATH79_MACH_TL_WR1043ND) += mach-tl-wr1043nd.o
obj-$(CONFIG_ATH79_MACH_TL_WR2543N) += mach-tl-wr2543n.o
obj-$(CONFIG_ATH79_MACH_TL_WR703N) += mach-tl-wr703n.o