4650f24b21
x86: rename gen_image_x86.sh to gen_image_grub.sh
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33510 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-22 20:10:31 +00:00
c463657e7c
cns3xxx: fix ethernet driver tx completion and queue stop/start
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33504 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-22 00:34:53 +00:00
c999cb61c9
cns3xxx: implement ethernet fraglist tx support for improved bridging performance with jumbo frames
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33503 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-22 00:34:49 +00:00
e6c6e76140
[cns3xxx]: move gpio stuff into the right file
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33502 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-21 05:40:04 +00:00
360d31e90b
[generic/3.3]: refresh patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33501 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-21 05:38:16 +00:00
19d64c1668
cns3xxx: add a small optimization for rx offload
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33500 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-21 00:13:12 +00:00
341e4ab8dd
cns3xxx: fix ethernet port lookup for multi-descriptor jumbo frames
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33499 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-21 00:13:08 +00:00
3d09f1a936
cns3xxx: fix ethernet packet alignment issues (hw has an alignment requirement of 64), fix skb fragment chaining
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33498 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-20 20:27:18 +00:00
9c44a20ec1
kernel: enable perf events when enabling profiling, fixes oprofile on arm
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33497 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-20 20:27:14 +00:00
8403c0dc75
[brcm47xx]: deactivate mips wait instruction for MIPS 74K on Broadcom SoCs
...
When not removing support for the wait instruction, when ruining on the
BCM4706 SoC the system stops after msleep() without an exception. I
haven't seen this problem on the other Broadcom SoCs with a 74K CPU,
but in the Broadcom SDK it is deactivated for all CPUs of this type.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33496 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-20 14:51:57 +00:00
039dcc7b78
cns3xxx: remove the broken flag
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33493 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-19 23:50:25 +00:00
9593dde703
cns3xxx: fix kernel config
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33492 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-19 23:50:22 +00:00
52652ace04
cns3xxx: fix ethernet jumbo-frame support, use single-page rx buffers and skb fragment lists
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33491 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-19 23:50:18 +00:00
a32de26f10
cns3xxx: fix ethernet tx checksum offload
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33490 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-19 23:50:15 +00:00
01c060f1c1
cns3xxx: merge ethernet driver changes from gateworks
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33489 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-19 23:50:12 +00:00
1c490b4411
cns3xxx: build images for the old boot loader and the new one (default to the new one)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33488 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-19 23:50:09 +00:00
098c15a379
cns3xxx: fix the ethernet driver makefile
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33487 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-19 23:50:06 +00:00
3f5b224952
cns3xxx: reorganize patches, fix pcie io space init order
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33486 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-19 23:50:02 +00:00
26e80ec109
cns3xxx: move virtual io addresses to vmalloc space to fix kernel BUG() calls
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33485 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-19 23:49:58 +00:00
a60c9bb9c0
cns3xxx: add missing callbacks for the laguna machine support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33484 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-19 23:49:50 +00:00
bc190083f8
brcm47xx/profiles/PS-1208MFG: remove reference to non-existing package
...
The package block-hotplug doesn't exist, refer to block-mount instead.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33474 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-19 15:13:33 +00:00
6518b98cf2
omap24xx/profiles/n810: remove reference to non-existing package
...
The package block-hotplug doesn't exist, removing reference to it.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33473 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-19 15:13:30 +00:00
c8aa973d09
[brcm47xx]: update fix-boot patch.
...
Do not change the code any more but use the kconfig options
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33463 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-19 10:18:36 +00:00
65957334b6
[brcm47xx]: update gpio patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33462 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-19 10:17:51 +00:00
87b3f288c1
ar71xx: fix a typo in TEW-637GRU image names
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33460 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-18 14:32:25 +00:00
2b11550938
ar71xx: revert DIR-825-B1 wholeflash image support.
...
It should be implemmented in a cleaner way.
This reverts the following commits:
[ar71xx] dir-825-b1: Fix wholeflash images
[ar71xx] dir825b1: Add image for DIR-825-B1 that uses the whole flash"
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33459 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-18 14:30:57 +00:00
06276fdcf6
[realview] disable VFPv4 probing
...
This will make the kernel crash on systems using qemu < 1.1.0. Until fixed
disable VPFv4 capability probing.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33458 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-18 10:00:56 +00:00
072f81a921
[realview] partially revert r33403
...
The target CFLAGS were also accidentally changed
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33457 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-18 10:00:46 +00:00
e3bad0e624
ar71xx: register the NAND flash controller device on DB120
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33455 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-17 20:30:57 +00:00
d5c1c3c4f3
ar71xx: ar934x_nfc: remove unused oob parameter of ar934x_nfc_send_read
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33454 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-17 20:30:55 +00:00
821819c0fd
ar71xx: ar934x_nfc: increase DMA retry count
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33453 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-17 20:30:54 +00:00
9ffbc4ff02
ar71xx: ar934x_nfc: optimize READOOB operation on large page devices
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33452 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-17 20:30:53 +00:00
375b85687f
ar71xx: ar934x_nfc: fix RNDOUT operation
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33451 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-17 20:30:51 +00:00
b31a6ffbb7
ar71xx: ar934x_nfc: fix READ{0,1} operation on large page devices
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33450 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-17 20:30:50 +00:00
4ea95cae7d
[ar71xx] dir-825-b1: Fix wholeflash images: Attempting to flash a wholeflash (-openwrt) image from the normal image would brick (but recoverable via emergency flash) the router if the wholeflash image was larger than the maximum size for a normal image. First we rename the -openwrt images to -wholeflash since -openwrt is really too generic. We also revert the changes to the regular dir-825-b1 image, which now is the same as before, but add a -towholeflash image which is almost the same as the regular dir-825-b1 image, but copies caldata to new location and allows flashing of images that use the full flash (except u-boot, u-boot-env, and caldata paritition space) (these are the -wholeflash images).
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33447 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-17 14:17:12 +00:00
0611e73d53
ar71xx: add missing code for ar933x WMAC reset that was left out during the ar71xx->ath79 migration, should fix wifi stability issues on ar933x
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33446 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-17 11:17:29 +00:00
6826f8137a
ar71xx: fix WP543 image builds
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33413 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-15 10:21:21 +00:00
148b5c8db7
D-Link DAP-1350; Avoid bricking esw config
...
This is a patch to connect eth0.1 (lan) to the only
ethernet connector available.
D-Link DAP-1350 goes bricked with AA 12.09-beta.
This is because the current esw configuration for the
board connects eth0.2 (wan) to the *ONE and ONLY*
ethernet connector available, preventing initial access
to the board through 192.168.1.1 on eth0.1 after flashing,
effectively bricking the board.
There are things that should be done to make this board
really useful, but for AA 12.09, this one liner is
indispensable.
Signed of by Yoichi Shinoda <shinoda@jaist.ac.jp>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33411 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-15 09:28:28 +00:00
c8cf798b79
ramips/rt3883: fix a typo in the ASUS profile
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33410 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-15 09:20:50 +00:00
3dbdd5cd3b
[realview] partially revert r33403
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33409 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-14 15:44:25 +00:00
567ae971e1
[leon] set DEVICE_TYPE to developerboard
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33408 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-14 15:37:51 +00:00
e05049798e
[leon] fix sparc32 assembler failures with newer toolchains
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33407 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-14 15:37:40 +00:00
86cc1ae305
[leon] refresh patches so they apply cleanly
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33406 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-14 15:37:12 +00:00
cebfb5cc8a
[realview] set DEVICE_TYPE to developperboard
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33403 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-14 15:36:33 +00:00
7f130ece1b
[malta] set DEVICE_TYPE to developperboard
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33402 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-14 15:36:30 +00:00
dfae978f1f
ar71xx: merge machine support patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33389 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-13 07:26:28 +00:00
76e3187aa2
ar71xx: register the NAND controller device on the RB2011
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33388 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-13 07:26:26 +00:00
30da844351
ar71xx: add device registration code for the AR934x NAND flash controller
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33387 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-13 07:26:25 +00:00
488c801a0a
ar71xx: package the AR934x NAND driver module
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33386 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-13 07:26:23 +00:00
83d96d137b
ar71xx: ar934x_nfc: experimental NAND Flash Controller driver for AR934x
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33385 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-13 07:26:22 +00:00
22c82787d3
generic: add MTD_NAND_AR934X symbol
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33384 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-13 07:26:21 +00:00
df1e2bf058
generic: move GENERIC_PWM symbol into the generic config
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33383 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-13 06:38:31 +00:00
92cf14032d
ar71xx: define NAND controller base address and register size for AR934X/QCA955x
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33382 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-12 19:06:38 +00:00
88571c64d7
ramips/rt305x: add initial support for Rt5350 SoC
...
Somehow detecting the RAM size in common/setup.c doesn't
work here, it always detects 64M and then crashes on devices
with less RAM.
Probably using MEMC_REG_SDRAM_CFG1 to know the RAM size is how
it could be, for now I use the mem=32M kernel parameter to get
stuff working.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33381 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-12 19:03:12 +00:00
156f304b46
[brcm47xx]: add gpio sysfs entries
...
This fixes #10256
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33369 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-11 15:04:20 +00:00
888f24c4a4
ar71xx: use correct fractional dividers for {CPU,DDR}_PLL on QCA955x
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33362 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-10 14:38:01 +00:00
9f2bbfb423
ar71xx: fix QCA955X_EHCI_SIZE
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33360 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-10 14:32:54 +00:00
ed2a905399
[generic] fix ixp4xx_hss build failure ( #12162 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33356 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-10 08:53:21 +00:00
11c0146a2b
[ar71xx] fix description of nand/Ath5k profile ( #12149 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33352 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-09 21:40:26 +00:00
cb49889809
ar71xx: add initial support for RB2011UAS-2HnD
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33349 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-09 14:05:32 +00:00
0ea5d33e08
ar71xx: use routerboot_find_tag to find wlan data offset on RB751
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33348 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-09 14:05:30 +00:00
2a30d5c072
ar71xx: add RouterBoot related helper routines
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33347 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-09 14:05:28 +00:00
93f4aa6853
generic add WLAN calibration data ID to routerboot.h
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33346 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-09 14:05:26 +00:00
d90a416bf5
ar71xx: define MTD partitions for RB2011
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33345 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-09 14:05:24 +00:00
9b0f8cd250
ar71xx: add preliminary support for Mikrotik RB2011L
...
This patch adds preliminary support for the Mikrotik RB2011L.
The NAND flash is not yet supported, so only the initramfs
kernel can be used for now.
[juhosg: remove unnecessary PCI/USB related stuff, the board
does not use that, update commit message]
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33344 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-09 14:05:22 +00:00
26e1a6b953
ar71xx: use dynamic clock dividers on the 2nd MDIO of AR934x
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33343 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-09 14:05:20 +00:00
773fa9a77f
ar71xx: add dynamic MDIO clock calculation
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33342 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-09 14:05:17 +00:00
2ef5213899
adm5120: move common routerboot definitions into a separate header file
...
Those will be used on the ar71xx platform as well.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33341 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-09 11:55:42 +00:00
46fbefc179
bcm63xx: fix WPS button polarity for Alice Gate VoIP 2 + Wifi
...
Fixes booting the device with button hotplug enabled (#10785 ).
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33340 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-09 11:54:56 +00:00
46d2e6a5b9
ar71xx: use the RLE library for RB751
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33338 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-08 17:51:56 +00:00
eadecf68d8
ar71xx: add library code for RLE decoding
...
It will be used for the MikroTik boards.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33337 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-08 17:51:54 +00:00
4bae61be20
ar71xx: fix CPU/DDR frequency calculation for SRIF PLLs on AR934x
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33335 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-08 13:39:09 +00:00
22d4d1fb84
ar71xx: refresh kernel patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33334 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-08 13:39:04 +00:00
2daf0ae204
[mcs814x] use the recommended ARM I/O accessors
...
use {read,write}l_relaxed instead of the plain __raw_{read,write}l variants.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33330 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-08 09:51:05 +00:00
acf052c5ce
[ar71xx] dir825b1: Add image for DIR-825-B1 that uses the whole flash (must first be flashed with the 'standard' image) and an image to revert the change to allow reversion to stock firmware.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33326 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-06 18:15:26 +00:00
aeec5aa62f
lantiq: fix sx76x default uci network configuration
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33324 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-06 00:09:46 +00:00
de8a1fe701
[mcs814x] add some ohci workarounds to make ohci work
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33323 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-05 20:19:29 +00:00
d4ae3a4ae2
ramips: Add missing andmask to ramips_esw register read for recv_good value.
...
Add missing andmask to ramips_esw register read for recv_good value.
Without the mask, recv_bad leaks into the recv_good packet count.
Didn't notice the bug before since you don't usually get bad
packets, so I only saw it when I was playing with overlength packets
earlier...
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33322 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-05 20:08:43 +00:00
68eeafd44e
ramips: Use doubletagging to disable ramips_esw vlan by default, it seems more reliable.
...
Use doubletagging to disable ramips_esw vlan by default, it seems
more reliable.
Daniel Golle found an issue where sometimes (possibly only for
RT3352) the default vlan disable method (clearing en_vlan, untag,
doubletag and putting all ports into vlan 0) doesn't work and the
packets get sent out vlan-tagged with vlan 0.
Instead switch to using the doubletagging method (allow doubletagged
packets, put all ports into vlan 0 with untag enabled) by default.
Unless someone figures out a way to really globally disable vlan for
this switch, this seems like the best (most reliable) option.
I did some tests regarding maximum packet size and did not see any
difference between the two methods, both allow for slightly bigger packets
than the ramips_main.c ethernet driver (ping stops going through
above "ping -s 1472" (1514 bytes), on the switch packets are recv_good until
"ping -s 1490", or about 1532 bytes).
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33321 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-05 20:08:42 +00:00
23e9529aae
[x86] add missing kvm_guest kernel options
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33319 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-05 19:38:42 +00:00
a74ed9bf17
ar71xx: use correct fractional dividers for {CPU,DDR}_PLL on AR934x
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33318 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-05 19:26:50 +00:00
34ed9e63e7
ar71xx: add rssileds to package set in profile for devices which got them.
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33317 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-05 19:22:51 +00:00
8455fca9ec
ramips: add rssileds to package set in profile for devices which got them.
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33316 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-05 19:22:48 +00:00
e6b1ba9d19
[mcs814x] enable CFI command set 0002 FORCE_WORD_WRITE
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33315 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-03 20:25:51 +00:00
b1e622e776
[mcs814x] pad squashfs image
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33314 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-03 20:25:46 +00:00
c5fa46dc5f
[mcs814x] add Generic and dLAN USB Extender profiles
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33313 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-03 20:25:40 +00:00
a7b6531eea
[mcs814x] nuport-mac: disable MAC RX and TX during interface close
...
Fixes sporadic crashes while reconfiguring the network interface.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33312 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-03 10:26:01 +00:00
22fef4fdc7
Revert "ar71xx: only allow RGMII mode on the 2nd ethernet MAC of the AR7240"
...
That was based on assumptions.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33310 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-29 10:37:55 +00:00
bbf079b1d1
ar71xx: all0315n: fix ethernet according to vendor info
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33309 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-29 10:37:54 +00:00
9a56a87ead
ar71xx: add RSSI LEDs of ALL0315N to uci-defaults/leds
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33308 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-29 10:37:53 +00:00
f707dd5d12
ramips: add kmod-usb-ohci to defaults packages in profile of ALL5002
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33307 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-29 10:37:51 +00:00
fb3d571824
ramips: make built-in switch transparent for ALL0256N and ALL5002
...
This allows them to transparently communicate with an external VLAN switch.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33305 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-29 10:37:47 +00:00
9ea1da3c30
ramips: Power down phy on disabled switch ports
...
Power down phy on disabled switch ports.
Haven't measured this myself yet, but according to this
http://www.8devices.com/community/viewtopic.php?f=6&t=156
it can save about 300mW of power.
[juhosg: fix checkpatch warning]
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33304 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-29 10:37:45 +00:00
98ec68aa25
ramips: Add support for 8devices Carambola dev board.
...
Add support for 8devices Carambola dev board.
The Carambola is a small RT3050-based development board with two
ethernet ports, on-board chip antenna, usb and plenty of accessible
gpio ports, sold by 8devices.
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33303 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-29 10:37:43 +00:00
a06541402f
ramips: Rename POC registers
...
Rename POC registers.
The current code uses POC1-POC3.
The datasheet uses:
POC1: Port Control 0
POC1: Port Control 1
POC2: Port Control 2
So the first POC1 is a typo that should have been POC0, rename the
registers to POC0-POC2 accordingly.
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33302 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-29 10:37:41 +00:00
0d5d65059a
ramips: Minor ramips_esw.c cleanup
...
Stop handling VLAN setup in the kernel.
Removes the obsolete RT305X_ESW_VLAN_CONFIG_BYPASS option I added for
WL-351 and add some extra comments.
Also removes the en_vlan per-port flag that isn't very useful really, it now
is only controlled by the global enable_vlan flag.
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33301 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-29 10:37:40 +00:00
e06f1e9ec0
ramips: Add switch setup to uci network defaults
...
Add switch setup to uci network defaults.
The 'lan' attribute is used to decide into which vlan to put the
port.
Currently 'disable' is never set, but the intention is to use this
for devices like the 8devices Carambola, which only has two ports
hooked up to the SoC.
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33300 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-29 10:37:38 +00:00
d7bf863ba7
ramips: Add swconfig support to ramips_esw.c
...
Add swconfig support to ramips_esw.c
This patch adds swconfig support for ramips_esw:
Tested on both D-LINK DIR-300 B1 and Sitecom WL-351 (external
rtl8366rb on internal port 5).
I've made sure that in the enable_vlan=0 case it behaves like a dumb
switch, so external switches should work fine with vlans and
verified this on the WL-351.
The current state shown by swconfig is always read directly from HW
registers, new settings only show after 'swconfig dev rt305x set apply'.
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33299 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-29 10:37:36 +00:00
357755f0cc
ramips: ramips_esw.c indentation cleanup
...
Minor indentation cleanup.
Prepare for the main swconfig patch by cleaning up indentation a bit.
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33298 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-29 10:37:35 +00:00
34df781dc4
ar71xx: image: fix Profile name for TL-WA701 ( closes #12094 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33295 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-29 10:37:30 +00:00
baf5f4c4c9
ar71xx: Buffalo WZR-HP-AG300H LED support
...
An improved LED support for Buffalo WZR-HP-AG300H.
There will be two new packages to go with this patch
(ar922x-led-fix-hotplug and ar922x-led-fix-init).
These packages essentially perform the same task of
disabling "JTAG over GPIO pins" function which is
currently required for LEDs on AR922x emac GPIO to work,
and are both considered a temporary fix that circumvent
this problem.
[juhosg: add the hotplug script from the proposed
ar922x-led-fix-hotplug package to ar71xx/base-files]
Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33294 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-29 10:11:55 +00:00
aa7c6a730e
gemini: fix bus ids for PHY devices ( closes : #12082 )
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33288 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-27 18:09:57 +00:00
6a0998c459
ar71xx: add profile for Allnet devices
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33287 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-27 14:55:38 +00:00
268ef7af33
ar71xx: generate image for ALL0315N
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33286 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-27 14:55:37 +00:00
1c8d93e18a
ar71xx: sysupgrade for the ALL0315N
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33285 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-27 14:55:36 +00:00
405863302d
ar71xx: rename all0258n.sh to allnet.sh
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33284 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-27 14:55:35 +00:00
4c72895d51
ar71xx: detect ALL0315N board
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33282 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-27 14:55:32 +00:00
eedcda6a27
ar71xx: add support for the Allnet ALL0315N board
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33281 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-27 14:55:31 +00:00
f4fbd75f87
ar71xx: only allow RGMII mode on the 2nd ethernet MAC of the AR7240
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33280 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-27 14:55:26 +00:00
d0cb8a4508
generic: add support for the EON EN25Q64 SPI flash chip
...
It is used in some TL-WDR4310 devices. Closes #12077 .
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33275 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-26 09:27:56 +00:00
f70db0dfef
ar71xx: unbreak building images for TL-WR1041N-v2, TL-WR2543N
...
Commit 48788063266ad99bdab03b53cbe7e1a564c2d9b3 (r33251) introduced a
regression with board= kernel command line parameter incorrectly
initialised.
The faulty builds propogated to the snapshots download area. This makes
the device unbootable and TP-Link users have to attach the serial to
recover.
Here is the q&d way i used to identify MIPS boards that didn't have a
corresponding entry in the image/Makefile:
for i in `find ../files/arch/mips/ath79/ -type f -exec cat {} \; \
| sed -n '/MIPS_MACHINE/ { s/^[^"]*"\([^"]*\)".*$/\1/; p; }'`; do
grep -q ,$i, Makefile || echo $i;
done > missing-boards.new
Reported-by: Casper on IRC
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33274 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-26 08:15:11 +00:00
9ac554e5c1
ar71xx: image: fix TL-WR1043ND board id ( #12079 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33272 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-26 06:30:37 +00:00
617f1635c3
[kirkwood] Enable eSATA sheevaplug
...
OpenWRT runs in a eSATA sheevaplug like a charm. This patch just enables
CONFIG_MACH_ESATA_SHEEVAPLUG so the proper MACHINE_START definition
is compiled in.
Signed-off-by: Unai Uribarri <unaiur@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33266 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-24 06:15:06 +00:00
c6d673ffc0
ar71xx: image: group and sort {Single,Multi}Profiles
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33264 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-23 13:17:47 +00:00
d79ba9fa20
ar71xx: image: group and sort mtdlayout definitions
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33263 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-23 13:14:35 +00:00
830413bd2e
ar71xx: image: use the MultiProfile helper for the Madwifi profile
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33262 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-23 13:11:25 +00:00
c0c61c0e85
ar71xx: image: automatically build a list of SingleProfiles
...
Use that for Default/Minimal profiles.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33261 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-23 13:08:15 +00:00
e5e4cacd0a
ar71xx: image: use the new helpers for the ZyXEL images
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33260 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-23 13:05:05 +00:00
cd86a7714a
ar71xx: image: use the new helpers for the Zcomax images
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33259 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-23 13:01:55 +00:00
047efd5853
ar71xx: image: use the new helpers for the WRT400 images
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33258 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-23 12:58:45 +00:00
ea4d3fac82
ar71xx: image: use the new helpers for the WZRHPG30XNH images
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33257 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-23 12:55:35 +00:00
07649c8d9b
ar71xx: image: use the new helpers for the WHRHPG300N images
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33256 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-23 12:52:25 +00:00
ec065bb299
ar71xx: image: use the new helpers for the UBNTXM images
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33255 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-23 12:49:15 +00:00
0b8df57570
ar71xx: image: use the new helpers for the UBNT images
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33254 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-23 12:46:06 +00:00
346334f34b
ar71xx: image: use the new helpers for the TPLINKOLD images
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33253 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-23 12:42:56 +00:00
955c3b975c
ar71xx: image: use the new helpers for the TPLINK-LZMA images
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33252 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-23 12:39:46 +00:00
34588836ee
ar71xx: image: use the new helpers for the TPLINK images
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33251 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-23 12:36:35 +00:00
376a6c3ff0
ar71xx: image: use the new helpers for the Planex images
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33250 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-23 12:33:25 +00:00
ab782e4de9
ar71xx: image: use the new helpers for the PB4X images
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33249 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-23 12:30:15 +00:00
c0191dd387
ar71xx: image: use the new helpers for the OpenMesh images
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33248 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-23 12:27:06 +00:00
654466496a
ar71xx: image: use the new helpers for the Netgear images
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33247 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-23 12:23:56 +00:00
dcc440d1d9
ar71xx: image: use the new helpers for the MyLoader images
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33246 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-23 12:20:46 +00:00
a97a011e2c
ar71xx: image: use the new helpers for the DIR825B1 images
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33245 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-23 12:17:36 +00:00
2eb4b6c4ca
ar71xx: image: use the new helpers for the CyberTAN images
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33244 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-23 12:14:26 +00:00
fdcfc8c40a
ar71xx: image: use the new helpers for the Cameo933x images
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33243 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-23 12:11:17 +00:00
e707f02ed6
ar71xx: image: use the new helpers for the Cameo913x images
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33242 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-23 12:08:07 +00:00
d6190769d0
ar71xx: image: use the new helpers for the Cameo7240 images
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33241 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-23 12:04:57 +00:00
9b8d64254e
ar71xx: image: use the new helpers for the AthGzip images
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33240 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-23 12:01:47 +00:00
17901dd54f
ar71xx: image: use the new helpers for the AthLzma images
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33239 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-23 11:58:37 +00:00
2a968b40ad
ar71xx: image: use the new helpers for the ALFA images
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33238 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-23 11:55:27 +00:00
1fd8590c1f
ar71xx: image: add a few helper functions
...
These functions will be used to simplify the Makefile.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33237 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-23 11:52:18 +00:00
3b1c7bfa88
ar71xx: image: pass mtdlayout as a separate parameter for the ALFA template
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33236 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-23 11:49:07 +00:00
e28966507b
[brcm47xx] update profiles
...
* add profile for BCM4705 based SoC using tg3 instead of b44
* remove redundant 105-Atheros.mk
* reorder
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33235 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-22 21:54:06 +00:00
ac4a6f2be2
ar71xx: add profile and build image for the TEW-712BR
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33234 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-22 20:18:44 +00:00
129e9c623f
ar71xx: TEW-712BR user space support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33232 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-22 20:12:24 +00:00
8185640913
ar71xx: add support for the TRENDnet TEW-712BR board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33231 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-22 20:09:13 +00:00
f6af8fc492
ar71xx: fix serial clock calculation on AR933x
...
Closes #12031 .
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33230 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-22 19:11:10 +00:00
f959964330
ramips: fix board parameter for the NBG-419N ( #12061 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33229 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-22 17:55:12 +00:00
4a272ceaea
ar71xx: fix comment style in mach-tl-wr2543n.c
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33227 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-22 12:42:59 +00:00
32a13b003b
ar71xx: fix mtd layout of the AP113
...
The 'mtdparts=' prefix and the name of the flash device is missing.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33226 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-22 12:39:46 +00:00
05e77cad67
ramips: add profile for Allnet devices
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33225 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-22 12:36:35 +00:00
b7fd6b817f
ar71xx: add ALL0305 board alias
...
For the pure convenience of having a correctly named
image and system name in /proc/cpuinfo , until we can
do that by having system names in DTS...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33224 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-22 12:33:22 +00:00
9bf14cd6d7
ramips: add RSSI leds for uci-defaults for ALL0256N
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33220 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-22 09:46:30 +00:00
0f8b30ebfb
ar71xx: add support for TP-Link TL-WDR3600
...
The TL-WDR3600 is identical to the TL-WDR4300 with the exception that is has
only two antennas.
[juhosg: remove the custom machine type, change the board name instead]
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33219 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-22 09:43:18 +00:00
9f3a4fd1bc
[tools] tools/firmware-utils/ptgen option to use MB rounding
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33218 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-22 09:22:38 +00:00
38daca0070
add led defintion for the WR2543 5GHz WLAN LED
...
Signed-off-by: Andy Leiserson <andy@leiserson.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33215 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-22 09:10:24 +00:00
34a39fc50c
[brcm47xx] remove unused file
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33210 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-18 15:45:18 +00:00
8a27d76db8
[brcm47xx] make brcm47xx build only with bcma or only with ssb support.
...
There are some ifdefs missing so when only ssb or only bcma was
selected in the kernel config it did not build.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33209 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-18 14:08:35 +00:00
a54983dbc4
[brcm47xx] update gpio patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33208 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-18 11:51:35 +00:00
37afa3cabe
ramips: add board alias for the ALL0239-3G
...
Generate image for the ALL0239-3G which can be flashed through the
chipset-vendor SDK based firmware's web-interface and bootloader.
The bootloader seems to ignore uImage checksum errors, but does complain about
them once the 0xDEADC0DE was replaced by an actual JFFS2 page.
I'm working on implementing fixtrx for uImage in the mtd package to solve this.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33206 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-17 17:56:07 +00:00
e453fc0796
ramips: add support for D-Link DIR-615 H1
...
rt2x00 still needs some patching as the radio doesn't come to life.
Installation via webflash.
[juhosg: fix whitespace issues, remove rt305x_register_usb
from machine setup because the board has no USB port]
Signed-off-by: Mikko Hissa <mikko.hissa@uta.fi>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33205 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-17 17:56:05 +00:00
59ff64dbf5
ar71xx: setup WLAN LED for the TL-WA901ND v2
...
Closes #11889 .
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33202 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-16 07:11:30 +00:00
32c2df1794
generic: extend pci_isable_usb_common_quirks patch
...
Fixes the following build error:
SYSMAP System.map
Building modules, stage 2.
MODPOST 48 modules
ERROR: "usb_enable_xhci_ports" [drivers/usb/host/ehci-hcd.ko] undefined!
ERROR: "usb_is_intel_switchable_xhci" [drivers/usb/host/ehci-hcd.ko] undefined!
make[6]: *** [__modpost] Error 1
make[5]: *** [modules] Error 2
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33193 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-15 13:26:51 +00:00
540d12cc6e
[x86] set xen images to gzip compression, fixes #11970
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33192 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-15 09:20:12 +00:00
11293837c8
[mcs814x] MCS8140 actually selects CPU_ARM926T
...
Should make inclusion for other MCS814x SoCs easier
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33188 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-14 16:19:30 +00:00
e66a7efb23
[kernel] fixes gpio_dev un/reload balancing
...
Signed-off-by: SHI Bin <shibin@ctsing.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33183 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-14 12:32:11 +00:00
2af03272d3
[orion] generic: enhanced image Makefile
...
* Creation of uImage for WNR854T only done once (before 2x for jffs2 build and 1x for squashfs build)
* Got rid of unneccessary padding of rootfs partition
* ARM zImages always need a machine id, therefore do not copy generic (=no id) uImage to BIN_DIR, instead copy zImage
* Generalized functions for easier re-using and enhancing (e.g. D-Link DNS 323 implementation would be only a couple lines)
* Copy rootfs partitions to BIN_DIR, just like it is done for D-Link DNS 323
* Use variables to allows easily changing for custom builds, e.g. kernel mtd size for symbols
* Size check of kernel files to avoid builds that break devices
* Use for "-sysupgrade" and "-factory" in image names (like ar71xx, brcm63xx, etc.) to avoid questions about which image to use
Signed-off by: Matthias Buecher <mail@maddes.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33174 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-13 14:46:47 +00:00
b61a375cfa
ar71xx: uci-defaults/leds for ALL0258N
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33165 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-13 14:01:38 +00:00
8bccd58c7d
[brcm63xx] leds: do not register device if no leds defined
...
Signed-off-by: Miguel GAIO <miguel.gaio@efixo.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33158 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-13 09:55:10 +00:00
49461068df
[brcm63xx] BCM6358 fix enet MII clk definitions
...
Signed-off-by: Miguel GAIO <miguel.gaio@efixo.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33157 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-13 09:55:07 +00:00
23376a2818
[brcm63xx] nb4: fix support, add support for SVC and CLIP BTN
...
Signed-off-by: Miguel GAIO <miguel.gaio@efixo.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33156 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-13 09:55:04 +00:00
ada827ea02
ramips: rename rt3352 usb platform devices
...
In order to get OHCI/EHCI working on the Rt3352, the platform device must be
named so rt3883-?hci will recognize it.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33145 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-12 12:48:31 +00:00
f5cbc0457a
ramips: watchdog: use maximum possible timeout by default
...
As the userspace has no means to determine the maximum possible timeout, use
that as the default and let the userspace lower it when necessary.
As the result the usual OpenWrt install (with busybox's watchdog trying to set
the timeout to 60s on start) is using a 33s timeout on an RT3052 clocked at
384MHz instead of the current 20s default.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33144 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-12 12:48:28 +00:00
a2ec9c876d
ramips: provide means to specify custom "image name" for uImages, use for DIR-620
...
D-Link's DIR-620 allows to flash a uImage directly from its web-interface but
for that the image name should be set to DIR_620.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33143 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-12 12:48:26 +00:00
41a89cfaab
ramips: add D-Link DIR-620 A1 support
...
Full functionality runtime tested, installation via OEM web-interface requires
a follow-up patch.
Thanks go to Sergey Vasilyugin for his patch that pointed me at the missing
bits (including the antiparallel wps led).
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33142 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-12 12:48:24 +00:00
a3f4fb2069
generic: use __meminit annotation for crashlog_init_memblock
...
Fixes this section mismatch warning:
WARNING: vmlinux.o(.meminit.text+0xb14): Section mismatch in reference
from the function memblock_insert_region() to the function
.init.text:crashlog_init_memblock()
The function __meminit memblock_insert_region() references
a function __init crashlog_init_memblock().
If crashlog_init_memblock is only used by memblock_insert_region then
annotate crashlog_init_memblock with a matching annotation.
Also, remove the __init annotations from 'include/linux/crashlog.h'
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33137 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-12 10:30:41 +00:00
e3d76e51c1
[mcs814x] only support 128KiB erase block sizes
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33131 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-11 12:56:09 +00:00
8ace79f63d
[mcs814x] disable PCI support
...
None of the boards we support have PCI connectors
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33130 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-11 12:56:00 +00:00
9aa2b5a4ec
[mcs814x] strip a bit more the kernel config
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33129 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-11 12:55:51 +00:00
4996999295
[mcs814x] properly advertise OHCI and EHCI capabilities
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33128 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-11 12:55:41 +00:00
c8edb6e5cc
[mcs814x] change partition names to be more in line with other OpenWrt devices
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33127 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-11 12:55:30 +00:00
7c6523e2fb
[mcs814x] generate upgrade files suffixed with filesystem type
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33126 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-11 12:55:15 +00:00
332fbc08a1
[mcs814x] nuport-mac: delay call to napi_start() until fully able to process RX
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33079 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-10 07:04:21 +00:00
c4f48de8cc
[mcs814x] set a compatible command-line to boot from flash
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33078 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-10 07:04:16 +00:00
82d7a65e63
generic: rtl8366_smi: increase delay after switch hw reset
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33077 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-10 06:32:00 +00:00
f955432959
Fix hard reset of alix/soekris hardware under heavy NIC load
...
The following patch corrects a hard reset that occurs on alix and
soekris net5501 hardware. Specifically, this is an issue with the via
rhine NIC driver. Under periods of extreme load, the via rhine driver
can cause a reset of the entire system. When this happens no output is
seen on the console, the device simply reboots. This was reported in the
following ticket:
Consistent crash on Soekris NET5501
https://dev.openwrt.org/ticket/11882
I was able to reproduce the problem locally with numerous alix 2d13
platforms. Under heavy 64 byte frame size load from a Smartbits traffic
generator, the alix hardware will hard reset in under 5 minutes. The
same hardware, under the same load, on FreeBSD 9.0 does not reset.
The patch below backports most of the via rhine changes from kernel 3.5.
With OpenWrt trunk being on kernel 3.3.8, it seemed prudent to bring
these changes in to avoid this serious issue.
I've tested this heavily in my test environment and was able to keep the
device stable under load for extended periods of time without any resets.
Also, a nice side effect of this change is that it significantly raises
the performance the platform. Without this patch the alix 2d13 can move
approximately 29,000 packets per second at 64 byte frame sizes. After
this patch the alix can move 52,000 packets per second at 64 byte frame
sizes.
I put this patch under the x86 patches as those are the only platforms
with via rhine hardware that I'm aware of. If it needs to go some place
else please let me know.
Thanks,
Adam
Signed-off-by: Adam Gensler <openwrt@kristenandadam.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33072 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-09 09:41:22 +00:00
8e1f8a2085
[mcs814x] nuport-mac: use dma_mapping_error() instead of checking pointers
...
Thanks Gabor for spotting this
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33071 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-09 09:06:35 +00:00
9ded359521
[mcs814x] nuport-mac: rework PHY interrupt configuration to avoid races
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33070 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-08 21:51:18 +00:00
6f503e42e0
[mcs814x] nuport-mac: close possible race condition during start
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33069 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-08 21:51:13 +00:00
8aa941f17a
[mcs814x] nuport-mac: unmap the DMA buffer when closing device
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33068 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-08 21:51:09 +00:00
c447469124
[mcs814x] nuport-mac: check dma_map_single address return values
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33067 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-08 21:51:04 +00:00
bd676f181a
[mcs814x] build a Devolo dLAN USB Extender specific image
...
The kernel has to be rounded up to the nearest 1MB, then we append
the root filesystem at its end.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33066 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-08 21:51:00 +00:00
e0ed3cba8d
[mcs814x] cleanup image generation
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33065 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-08 21:50:55 +00:00
00f2d18224
[lantiq] pci gpio mapping
...
This patch fixes the GPIO ALTSEL settings for some of the GPIOs used by the PCI subsystem in Lantiq Danube. These changes are required for more than one PCI device to work. Tested with an ARV7510PW having two PCI-devices; a VIA USB controller and a Ralink WLAN mini-PCI card.
Signed-off-by: Matti Laakso <malaakso@elisanet.fi>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33054 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-08 12:14:43 +00:00
61b89035c3
bcm63xx: fix USB base registers and IRQs for BCM6328
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33005 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-05 23:18:22 +00:00
94458bde31
[brcm47xx] update tg3 driver
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33004 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-05 20:27:40 +00:00
0024237a5e
[brcm47xx] generate image for Linksys e3200
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33003 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-05 13:14:00 +00:00
3b5a66a3de
brcm47xx: update gpio patch
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33001 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-05 12:40:05 +00:00
bdf997adb2
brcm47xx: fix patch which moves the flash struct in wgt634u code
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33000 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-05 12:39:15 +00:00
2307592764
[lantiq] W502V/ARV4525 wireless mac bugfix
...
The ARV4525 board init is passing the wrong offset to
arv_register_ath5k() resulting in a bogus mac.
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32993 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-04 20:14:52 +00:00
b37db09843
brcm47xx: use libgpio instaed of implementing the gpio interface ourself.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32992 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-04 19:46:25 +00:00
ce06d1cf7b
[lantiq] cleanup patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32953 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-03 08:53:02 +00:00
a8facfad2a
[mcs814x] nuport-mac: properly protect the phy interrupt handler
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32951 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-02 18:13:17 +00:00
34b1cc667c
[bufferbloat] Codel: avoid a nul rec_inv_sqrt
...
One condition before codel_Newton_step() was not good if
we never left the dropping state for a flow. As a result
rec_inv_sqrt was 0, instead of the ~0 initial value.
codel control law was then set to a very aggressive mode, dropping
many packets before reaching 'target' and recovering from this problem.
Brought over from 3.5-stable
Signed-off-by: Dave Taht <dave.taht@bufferbloat.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32950 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-02 13:39:50 +00:00
894d03b715
[lantiq] fixes i2c clock enable
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32949 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-02 13:29:49 +00:00
3b76373f58
ar71xx: simplify misc IRQ handling
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32948 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-02 11:25:49 +00:00
c095247b18
ar71xx: fix AR934X_EHCI_SIZE
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32947 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-02 11:25:46 +00:00
e4c9a6778a
ar71xx: image: stop the switch from the lzma-loader on the TL-WR1043ND
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32946 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-02 09:54:41 +00:00
7a6d8bdc0a
ar71xx: image: allow to use board specific code in the lzma-loader
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32945 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-02 09:54:33 +00:00
18315094a0
ar71xx: init switch hw_reset on the TL-WR1043ND board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32944 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-02 09:54:28 +00:00
fcbe8ef24f
generic: rtl836x: add hw_reset field to struct rtl8366_smi
...
It will be used to start/stop the switch if that is
supported by the given board.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32943 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-02 09:54:21 +00:00
43975158da
generic: rtl8366_smi: use __rtl8366_smi_cleanup instead of gpio_free calls
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32942 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-02 09:54:13 +00:00
677ee8449a
[mcs814x] add missing netmask to the network config
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32941 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-01 22:09:13 +00:00
031b03b3dd
[mcs814x] assume the link is up and full-duplex by default
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32940 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-01 21:56:54 +00:00
bf2807bdf2
[mcs814x] add a default and suitable network config file
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32939 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-01 21:56:49 +00:00
4790652498
ar71xx: ew-dorin: added router firmware generation
...
[juhosg: remove dead code]
Signed-off-by: embedded wireless GmbH <info@embeddedwireless.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32934 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-01 12:24:57 +00:00
f4c0dcd203
ar71xx: ew-dorin: added USB support
...
Signed-off-by: embedded wireless GmbH <info@embeddedwireless.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32933 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-01 12:24:56 +00:00
47b8621773
ar71xx: Buffalo WLAE-AG300N wireless led patch
...
Here is the uci-defaults version of the led support for
the Buffalo WLAE-AG300N.
Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32932 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-01 12:24:54 +00:00
dce7a40da2
ar71xx: Buffalo WLAE-AG300N initial support
...
The patch set for Buffalo WLAE-AG300N initial support.
There is another patch for wireless led support that
is posted separately.
Note on serial console:
This unit has buffalo standard 4 pin console, but the unit may not power
on if some console apparatus is connected. This is probably due to some
electronic interaction between the unit's electronic power switch circuit
and the serial console apparatus. If this happens, it is required to power
on the unit without the console, then quickly (re-)attach it.
[juhosg: fix coding style]
Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32931 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-01 12:24:52 +00:00
fb8c91abdd
[mcs814x] resync defconfig enable XZ compression
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32930 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-01 12:01:27 +00:00
df6b8c9431
[mcs814x] properly generate squashfs, jffs2 and initramfs images and kernels
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32927 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-31 23:09:50 +00:00
a21c75cb87
[kernel] disable crashlog on ARM platforms for the moment
...
It is currently badly broken on ARM, until fixed, disable it
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32926 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-31 23:09:46 +00:00
f3513b1b9b
[lantiq] add lantiq svip support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32925 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-31 18:49:54 +00:00
9f30da9d33
bcm63xx: Add nb6 support (BCM6362 SoC base boards)
...
Signed-off-by: Miguel GAIO <miguel.gaio@efixo.com>
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
[jonas.gorski@gmail.com: add network config for nb6, make switch fix a
platform patch]
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32924 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-31 14:27:47 +00:00
3b35907125
bcm63xx: add basic bcm6362 support
...
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32923 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-31 14:27:42 +00:00
20350819d2
bcm63xx: enable usb for bcm6328
...
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32922 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-31 14:27:34 +00:00
656b206343
bcm63xx: update enetswitch driver
...
Update enetswith driver with latest fixes and additions.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32921 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-31 14:27:31 +00:00
6d1dc25f1b
bcm63xx: reorder patches
...
Fix the order and names of patches.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32920 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-31 14:27:25 +00:00
cf9ca15145
[at91] move i2c module to target modules.mk
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32910 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-29 13:20:51 +00:00
3dc21ab0df
[omap24xx] resync config
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32908 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-29 13:20:39 +00:00
f26a08079f
[omap24xx] use the same description as other omap platforms (without the dash)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32907 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-29 13:20:35 +00:00
7d1cfe9157
[kernel] refresh pwm patch
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32905 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-29 11:53:06 +00:00
841bbe2dbd
[kernel] clean up pwm patches and drivers
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32901 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-28 20:47:08 +00:00
388d1df961
[kernel] add config option CONFIG_I2C_MV64XXX to fix kirkwood build
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32898 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-28 11:36:52 +00:00
37a7de41f7
[realview] resync config
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32895 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-27 15:35:15 +00:00
bcd319c534
[brcm63xx] fix DVA-G3810BN image generation
...
Attached patch fixes a typo in the image Makefile, and overrides the
board name for DVA-G3810BN to set the correct board properties
Signed-Off-By: Jeroen van Bemmel <jbemmel@zonnet.nl>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32894 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-27 15:35:12 +00:00
b8a4800ab1
[brcm63xx] add D-link DVA-G3810BN-TL-1 support
...
Signed-Off-By: Jeroen van Bemmel <jbemmel@zonnet.nl>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32893 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-27 15:35:09 +00:00
699c69c326
[brcm63xx] Add CT6376-1 board support
...
Added CT6373 devices instead of using NB4's devices, as Florian suggested.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32892 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-27 15:35:05 +00:00
4ef6087c9b
[brcm63xx] Add brcmsmac profile
...
Add brcmsmac profile (kmod-brcmsmac + wpad-mini).
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32890 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-27 15:34:57 +00:00
bda60588cf
[atheros] Add leds back after migration to sysfs
...
atheros trunk moved to full sysfs gpiolib, but the leds were forgotten.
This restores the wlan led that was missing after switching from backfire
to trunk.
Signed-off-by: Karl Palsson <karlp@remake.is>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32885 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-26 17:06:55 +00:00
38058ef2b9
[brcm2708] add more missing config symbols
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32884 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-26 17:03:08 +00:00
bc998d69d0
[generic] add more USB-related config symbols
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32883 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-26 17:03:05 +00:00
ed50322443
[ep93xx] make sure target modules depend on the target
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32882 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-26 17:03:02 +00:00
4209833de7
[kernel] bcma: update to version from wireless-testing tag master-2012-07-16
...
I did not add the last patch, because it add some stubs for the flash drivers and our patches have to be changed for that, if the flash support in bcma is able to do something I will integrate it.
This also contains 3 additional patches fixing some bugs in bcma.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32880 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-26 15:42:18 +00:00
cbf3b3b510
[ar71xx] fix typo in modules.mk
...
This patch fixes a small typo in kmod-leds-wndr3700-usb description, where the board is for some reason made by NETGWR, not NETGEAR.
Signed-off-by: Roman A. aka BasicXP <x12ozmouse@ya.ru>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32870 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-25 19:52:30 +00:00
0f3cd880bd
[package] make kmod-fb dependent on DISPLAY_SUPPORT and update targets accordingly
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32869 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-25 19:36:19 +00:00
61d613b7f4
[ppc40x] move isp116x driver to target specific modules.mk
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32865 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-25 15:50:45 +00:00
669584e5a5
[ramips] move rt305x-dwc driver to target specific modules.mk
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32864 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-25 15:50:42 +00:00
76fa8c1bf0
[brcm47xx] move ubsec-ssb driver to target specific modules.mk
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32863 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-25 15:50:38 +00:00
a70e655f3d
[brcm47xx] move ssb-gige to target specific modules.mk
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32862 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-25 15:50:36 +00:00
6566d706be
[brcm47xx] move usb driver to target specific modules.mk
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32861 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-25 15:50:33 +00:00
999055d4be
[avr32] move mmc driver to target specific modules.mk
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32859 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-25 15:50:26 +00:00
e75a2994aa
[ixp4xx] move ixp4xx-eth to target specific modules.mk
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32858 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-25 15:50:23 +00:00
d13f533d5f
[ixp4xx] move crypto module to target specific modules.mk
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32856 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-25 15:50:16 +00:00
16ffb690a4
[octeon] move i2c driver to target modules.mk
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32855 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-25 15:50:13 +00:00
9b33874a28
[ar71xx] move watchdog driver to target specific modules.mk
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32854 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-25 15:50:10 +00:00
82782abc1f
[ar71xx] move target specific spi modules
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32853 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-25 15:50:04 +00:00
c7b3d1ed91
[ar71xx] move target specific leds modules to ar71xx modules.mk
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32852 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-25 15:50:02 +00:00
5ce1b9bd3e
[x86] move leds modules back to target modules.mk
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32851 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-25 15:49:57 +00:00
ddba8e58ea
[x86] move i2c modules back to target modules.mk
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32850 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-25 15:49:54 +00:00
425edd72ab
[x86] move more x86-specific modules back to target modules.mk
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32848 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-25 15:49:49 +00:00
4dd53d4910
[x86] move x86 specific ide/pata modules to x86' modules.mk
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32846 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-25 15:49:42 +00:00
22ec767935
brcm47xx: reorder patches so that the patches already in mainline linux will be applied at first.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32845 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-25 14:52:00 +00:00
518908b849
[kernel] add yet another framebuffer symbol
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32844 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-25 14:01:57 +00:00
080c55ae7a
[package] split framebuffer helper modules to their own packages
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32843 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-25 14:01:54 +00:00
964b79911d
[cobalt] remove broken flag
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32842 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-25 14:01:51 +00:00
6882629b8c
[cobalt] package buttons driver separately
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32841 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-25 14:01:49 +00:00
d5a1f05020
[cobalt] package cobalt lcd as a module
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32840 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-25 14:01:46 +00:00
88982aa06c
[kernel] add unset CONFIG_FB_XGI to fix fullbuilds
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32836 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-25 09:05:23 +00:00
1dd071151c
[brcm2708] cleanup config-3.3, remove =m
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32835 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-25 09:05:18 +00:00
f3f9d768fa
[cns3xx] laguna: fix eeprom read buffer size during platform configuration
...
Increase the size of the buffer used for eeprom reads during the platform configuration of the Gateworks laguna. The model name read in is 16 bytes but the original buffer was only 8 bytes.
Signed-off-by: David Acker <dacker@rajant.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32833 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-25 08:01:38 +00:00
259cad41cd
[brcm2708] adds target used by rapsberry pi
...
Add support for Raspberry Pi / brcm2708 / 2835
Signed-off-by: Ian Ridge <ianridge [at] gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32825 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-24 20:39:17 +00:00
868ad2121e
[ramips] DWC otg usb: compilation fixes and trivial bugfix in slave mode
...
Signed-of-by: Nikolai Zhubr <n-a-zhubr@yandex.ru>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32823 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-24 20:38:55 +00:00
d3acf0305c
[ramips] D-Link DAP-1350 initial support
...
The initial support for the D-Link DAP-1350.
USB related functionality is not tested.
Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32821 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-24 20:38:43 +00:00
e04819fe32
[ixp4xx] MI424WR - add rev D support
...
Add support for revision D of the MI424WR.
Rev D swaps LAN & WAN ports so this patch maintains
eth0 for LAN and eth1 for WAN. For details on rev D usage,
see http://wiki.openwrt.org/toh/actiontec/mi424wr
Signed-off-by: Jose Vasconcellos <jvasco@verizon.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32820 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-24 20:38:36 +00:00
0e8ecb4824
[ramips] initial LED configuration for Fonera 2.0n
...
Setup initial configuration for Wifi and USB LEDS of a Fonera 2.0n (ramips)
Signed-off-by: Malte Forkel <malte.forkel@berlin.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32819 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-24 20:38:31 +00:00
71e078cc54
[ramips] add ALL5002 userspace support
...
detect EEPROM, MAC addresses and support sysupgrade for the ALL5002
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32816 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-24 20:38:14 +00:00
c5ec28deae
[ramips] enable OHCI/EHCI glue on Rt305x, so it is available for Rt3352F.
...
Hope that this works, didn't have a chance to actually test it...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32815 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-24 20:38:08 +00:00
cd51bb7747
[ramips] add image build for ALL5002
...
add image build for ALL5002
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32814 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-24 20:38:03 +00:00
bc1e4be7d4
[ramips] add support for Allnet ALL5002 to kernel
...
support ALL5002 in ramips/rt305x branch of the kernel.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32813 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-24 20:37:56 +00:00
664e8551c6
[ramips] uart_clk on Rt3352F is always 40MHz
...
Currently, sys_clk/10 is used which is just wrong.
cpu_clk/10 would work for systems with 400MHz CPU clock.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32812 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-24 20:37:50 +00:00
90bc81bd9e
[omap24xx] move omap specific modules to modules.mk
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32810 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-24 19:43:54 +00:00
6ccd54a9ab
[omap24x] move n810 battery module to omap24 modules.mk
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32809 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-24 19:43:49 +00:00
5092abf8e5
[omap24x] move target specific modules to target's module.mk
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32808 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-24 19:43:45 +00:00
5fe018c393
[ep93xx] package ep93xx framebuffer
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32807 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-24 19:43:35 +00:00
32a362059c
[ep93xx] remove crypto symbols override
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32806 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-24 19:43:31 +00:00
a4e930b56b
[generic] add missing framebuffer related symbols
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32804 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-24 19:43:23 +00:00
32aad3f549
[ep93xx] remove broken flag, since it works
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32803 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-24 19:43:19 +00:00
2893c62ad8
[ep93xx] fix sound modules loading order and dependencies
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32802 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-24 19:43:15 +00:00
33dbc834e1
[ep93xx] package ep93xx touchscreen driver as a module
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32799 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-24 19:42:49 +00:00
4a68d3214c
[ep93xx] set DEVICE_TYPE to developerboard
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32798 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-24 19:42:44 +00:00
c5b2a22982
[lantiq] rebase config-3.3
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32797 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-24 17:28:25 +00:00
287c1a65b2
[generic] fix tantos patch properly
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32796 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-24 17:28:12 +00:00
2991af7a05
[generic] make tantos switch select ETHERNET_PACKET_MANGLE
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32795 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-24 16:50:14 +00:00
33b2ded9b9
[lantiq] move CONFIG_ETHERNET_PACKET_MANGLE to a generic config file
...
This broke falcon builds
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32794 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-24 15:33:01 +00:00
7da8fc992d
[kernel] crashlog: fix dependency, add memblock support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32787 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-22 16:39:33 +00:00
5d7bf2454a
kernel: fix portability issues on the x86 specific relocs host tool, fixes build on mac os x
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32783 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-20 12:28:50 +00:00
2cd40740fa
[au1000] rename upgrade image to sysupgrade.bin for consistency
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32770 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-17 16:47:57 +00:00
f24645d38e
[au1000] add missing configuration symbols
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32769 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-17 16:40:28 +00:00
12b3013f15
au1000: implement sysupgrade platform.sh
...
Signed-off-by: Bruno Randolf <br1@einfach.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32768 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-17 16:40:24 +00:00
6ea773bad6
au1000: clean up profiles
...
Signed-off-by: Bruno Randolf <br1@einfach.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32767 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-17 16:39:52 +00:00
bb1fe5cfc1
au1000: fix InternetBox idsel and remove broken flag
...
The following patch is necessary for the InternetBox (Surfbox) board-specific
idsel to work with newer kernels. Acutally I don't exactly understand why this
was not necessary before, but without the udelay, the MiniPCI adapter in slot 3
is not detected and set up correctly.
Also remove platform broken flag, it works.
Signed-off-by: Bruno Randolf <br1@einfach.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32766 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-17 16:39:47 +00:00
35fed0980c
ar71xx: enable I2C_GPIO, the PB44 board needs that
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32738 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-15 17:52:52 +00:00
72b013b3d9
ar71xx: fix PB44 board detection
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32737 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-15 17:52:50 +00:00
cc9e5f0e9b
ar71xx: use gpio_set_value_cansleep on sleeping GPIOs in ath79_spi
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32736 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-15 17:52:48 +00:00
de1bb118ce
kernel: add Marvell SoC built-in RTC to modules
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32732 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-15 14:25:30 +00:00
d85b408d9b
[mcs814x] set DEVICE_TYPE to other to avoid pulling unecessary packages
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32731 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-15 14:10:03 +00:00
b6ea2c7d2e
[mcs814x] add compatible property to pci node
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32730 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-15 14:09:40 +00:00
d830eca387
[mcs814x] use ohci_err() instead of err()
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32729 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-15 14:09:32 +00:00
4b394c1b83
[mcs814x] make sure we properly unmap DMA mappings we created
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32728 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-15 14:09:24 +00:00
8f1bb68c38
[mcs814x] nuport-mac: add definitions of the various bits/masks used
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32727 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-15 14:09:18 +00:00
5ab77427e9
kirkwood: add support for seagate goflexnet and goflexhome
...
Signed-off-by: Martin Mueller <mm@sig21.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32725 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-15 12:18:29 +00:00
78d2618fec
kirkwood: revert config changes from r32053
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32719 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-15 00:08:52 +00:00
42ee0d2a0f
ar71xx: build firmware image for the TP-Link TL-WDR4310 v1.0
...
The hardware for TP-Link TL-WDR4300 v1.1 and TL-WDR4310 v1.0 is
identical, but requires different firmware headers:
TL-WDR4300:
00000040 43 00 00 01 00 00 00 01 00 00 00 00 76 fb 83 40 |C...........v..@|
TL-WDR4310:
00000040 43 10 00 01 00 00 00 01 00 00 00 00 38 2b 50 6c |C...........8+Pl|
[juhosg: change commit message, use a different model name]
Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32683 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-12 13:38:40 +00:00
cb32e76a01
ramips: rt305x: add support for Edimax 3G-6200N
...
Support for Edimax 3G-6200N router with USB.
Signed-off-by: Lukasz Golebiowski <lgolebio@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32682 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-12 13:29:46 +00:00
5327743b32
generic: ocf: restore terminating entry of pci_id_table in hifnHIPP
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32680 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-12 08:34:23 +00:00
920c9f2577
ar71xx: select ATH79_DEV_M25P80 for the WRT400N board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32679 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-12 08:34:22 +00:00
690472051f
ar71xx: airrouter power led support
...
This patch adds support for power led to Unifi Airrouter AP.
[juhosg:fold the patch into 608-MIPS-ath79-ubnt-xm-add-more-boards.patch]
Signed-off-by: Rocco Folino <lordzen@autistici.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32678 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-12 08:34:21 +00:00
acef82907f
ar71xx: unifi reset button support
...
This patch adds support for reset button to Ubiquiti UniFi AP.
[juhosg: fold the patch into 608-MIPS-ath79-ubnt-xm-add-more-boards.patch]
Signed-off-by: Rocco Folino <lordzen@autistici.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32677 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-12 08:34:20 +00:00
43b88ffc17
ar71xx: airrouter reset button support
...
This patch adds support for reset button to Ubiquiti Airrouter AP.
[juhosg: fold the patch into 608-MIPS-ath79-ubnt-xm-add-more-boards.patch]
Signed-off-by: Rocco Folino <lordzen@autistici.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32676 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-12 08:34:18 +00:00
7bb8a26e0c
ocf: update to version 20120127
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32672 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-11 23:38:14 +00:00
5a4398b767
kernel: bcma: update to version from wireless-testing tag master-2012-07-11
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32670 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-11 22:17:05 +00:00
05cf8f8a39
[brcm63xx] remove bcm63xx_pci_register() call in livebox board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32661 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-11 09:15:26 +00:00
cf3626941f
[brcm63xx] use physmap-flash on livebox ( #8677 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32660 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-11 09:15:22 +00:00
62fe65a569
[mcs814x] nuport-mac: check netif_receive_skb() return value
...
We did not reassign status to netif_receive_skb() return value, we thus
almost always incremented the dropped counter because the descriptor status
value never matches the NET_RX_DROP.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32659 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-11 08:29:01 +00:00
a6e9faddf5
[mcs814x] fix typo on of_node_put()
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32653 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-09 14:44:15 +00:00
9dee635f13
[brcm63xx] Detect alternative "cfe-" version bootloaders (found in 963281T_TEF board)
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32643 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-06 22:10:37 +00:00
6b1ecb3b19
ar71xx: swizzle address for PCI byte/word access on AR71xx
...
Closes #11683 .
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32639 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-06 16:33:12 +00:00
2abcacf78c
ar71xx: select SOC_AR933X and ATH79_DEV_WMAC for the OM2P board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32638 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-06 11:12:02 +00:00
e3713770f9
ar71xx: merge new board patches into the generic patch
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32637 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-06 11:12:01 +00:00
882faabe62
ar71xx: OM2P LC sysupgrade patch
...
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32635 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-06 11:11:58 +00:00
6bd1255c39
[mcs814x] call of_node_put() on ethernet node
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32628 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-05 18:46:55 +00:00
e9c7ab5034
[mcs814x] fix EPHY clock bit definition after r32489
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32627 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-05 18:46:52 +00:00
1469b30ee6
[mcs814x] give an unique partition identifier for dLAN USB Extender Combined partition
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32626 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-05 18:46:48 +00:00
b45a6d878e
ar71xx: set firmware version for the TL-WR2543N
...
This ensures that the resulting firmware can
be flashed from the latest (v3.13.17) offical
firmware.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32617 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-05 16:25:31 +00:00
cdd38c0a64
ar71xx: make 2.4GHz wlan LED work on the WR2543N
...
Because ath9k does not supports separate LEDs for
different bands yet, the 2.4GHz LED will show the
activity, even if the 5GHz band is selected.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32615 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-05 16:25:26 +00:00
a9e60e6959
ar71xx: OM2P sysupgrade support
...
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32613 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-05 08:26:57 +00:00
bb0fdf5209
ar71xx: add support for the OpenMesh OM2P-LC board
...
Patch-by: Marek Linder <marek@open-mesh.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32611 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-05 08:26:53 +00:00
6bd692c4d6
ar71xx: add profile and build image for the Atheros AP136 reference board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32609 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-05 08:26:51 +00:00
085697d0bd
ar71xx: AP136 user-space support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32608 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-05 08:26:50 +00:00
c713180a79
ar71xx: add initial support for the Qualcomm Atheros AP136 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32607 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-05 08:26:48 +00:00
85fc3d402c
ar71xx: add initial support for the QCA955X SoCs
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32606 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-05 08:26:47 +00:00
d33dfd12ab
ar71xx: refactor PCI code to allow registering multiple PCI controllers
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32605 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-05 08:26:45 +00:00
4ecbabb00b
generic: ar8216: start aneg on each PHY of the AR8327
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32604 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-05 08:26:39 +00:00
59677232f8
[mcs814x] add missing interrupts properties to some device nodes
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32603 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-04 19:37:11 +00:00
e476f06414
ar71xx: update the EW Dorin MTD layout, increase kernel partition size (requested by EW)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32599 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-04 10:55:56 +00:00
99927f8bfa
bcm63xx: bcm63xx-spi does not depend on spi-bitbang
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32594 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-03 21:42:17 +00:00
fab5332cbd
bcm63xx: 96348A-122 improvements (Comtrend 5365)
...
1) Improve WLAN button.
2) Add 96348A-122 image.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32593 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-03 21:42:15 +00:00
51344d2479
bcm63xx: fix second caldata address calculation
...
thanks Noltari for spotting this.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32592 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-03 21:42:12 +00:00
297078e82c
bcm63xx: update patches to latest upstream versions
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32591 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-03 21:42:07 +00:00
e6d44db12b
kernel: generic: spi: allow empty (un)prepare transfer
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32590 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-03 21:42:03 +00:00
a2954f12fb
ar71xx: improve MDIO busy wait code
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32586 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-03 15:24:02 +00:00
7e8616d85a
ar71xx: remove the built-in MTD map of the ALL0258N
...
Pass the mtd_layout via the kernel command line instead.
Also increase the kernel partition size to 1024k, so current kernel can fit in.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32585 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-03 15:24:01 +00:00
176f801ce4
[brcm63xx] refresh patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32581 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-03 09:45:46 +00:00
540c45aaa3
kernel: ssb/bcma: update to version from wireless-testing tag master-2012-07-02
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32580 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-02 23:12:58 +00:00
c75d54bf3f
[brcm63xx] fix watchdog and rng drivers section mismatch ( #11767 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32522 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-29 09:07:54 +00:00
64be1d33e1
ar71xx: detect and enable MIPS DSP extensions, AR9344 supports them ( fixes #11762 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32520 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-28 16:05:08 +00:00
b7f4ff45e3
kernel: switch openwrt default to TCP cubic from westwood (patch by Dave Täht)
...
Despite Westwood's theoretical advantages, in nearly
every benchmark we ran last year, TCP cubic won, whether it be
on correct RTT estimates, amount of buffering, responsiveness,
etc. on current hardware and software designs.
(both need timestamps on to work well, besides)
TCP cubic is better maintained and understood than westwood,
also.
While a scenario where westwood would win possibly exists,
there is too much buffering in the wifi stack in particular
at present, to see any improvement.
If you wish to exercise various TCPs under contention,
the current svn head of netperf (2.6) has options to switch
congestion control agorithms on the fly, as does iperf.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32514 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-27 22:32:47 +00:00
d076802752
[brcm63xx] fix SPI clock frequency selection
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32512 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-27 22:14:50 +00:00
bbf923a00f
kernel: add missing config symbol
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32498 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-24 20:21:27 +00:00
98a11b83cc
ramips: mac address detection for Fonera 2.0n
...
Detect and apply MAC address of a Fonera 2.0n (ramips)
Signed-off-by: Malte Forkel <malte.forkel@berlin.de>
Signed-off-by: Vasilis Tsiligiannis <b_tsiligiannis@silverton.gr>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32490 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-23 13:58:29 +00:00
2c440535b3
[mcs814x] provide an early ioremap cookie of the system configuration register
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32489 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-23 11:03:50 +00:00
32e4646654
[mcs814x] group SYSDBG register defines in mcs814x.h
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32488 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-23 11:03:45 +00:00
ce5f9970fe
[mcs814x] make hardware.h a forward inclusion of mcs814x.h
...
mach/hardware.h is soon to be removed by upstream kernel
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32487 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-23 11:03:40 +00:00
a2cd791e83
[mcs814x] remove platform specific initialization from ethernet driver
...
Hardware filtering must always be enabled as long as there is an Ethernet
device registered, and use device tree for setting the link activity and
buffer shifting enable/disable bit.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32486 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-23 11:03:35 +00:00
106cd1abfa
[mcs814x] regroup interrupt controller register definitions in hardware.h
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32485 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-23 11:03:29 +00:00
12db25fe25
[mcs814x] remove handle_irq callback in board-mcs8140-dt.c
...
This should have been removed in r32470.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32481 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-21 12:20:47 +00:00
f176627d9e
[mcs814x] fix USB led triggers
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32474 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-20 21:58:00 +00:00
3d38250a52
[mcs814x] use generic uci defaults functions
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32473 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-20 21:57:56 +00:00
a3c7dde953
[mcs814x] remove uselss cache invalidations
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32472 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-20 21:57:53 +00:00
2c4cbaba5d
[mcs814x] improve ethernet driver debugging
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32471 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-20 21:57:49 +00:00
e8d95819ae
[mcs814x] do not use MULTI_IRQ_HANDLER it is bogus on our platform
...
This caused stalls in the Ethernet DMA block, so until properly
written and sorted out, fallback to the assembly version instead.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32470 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-20 21:57:45 +00:00
4065df02da
[target/xburst] verified to work - remove broken flag
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32469 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-20 19:04:35 +00:00
372091a802
[x86] Fix sysupgrade for squashfs, jffs2 and ext4 images
...
* use 'fsync' with 'dd' for image writing
* save config to boot partition
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32465 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-19 22:36:53 +00:00
fea5404e8a
[mcs814x] add Moschip MSC814x support
...
This target currently only supports Moschip's MCS8140 SoC, but support
for other chips in the same family (MCS8142, MCS8144) will be easy to add.
Target support is entirely using Device Tree for probing peripherals.
Drivers support include:
- PCI
- USB 1 & 2
- watchdog
- random number generator
- UART
- timer
- internal Ethernet PHY
- Ethernet MAC core
Support for the following boards is included using Device Tree
- Devolo dLAN USB Extender
- Tigal RBT-832
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32462 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-19 14:48:56 +00:00
208fa63215
ar71xx: create profile and build image for the TL-WDR4300 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32461 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-19 11:51:20 +00:00
c9e25879a5
ar71xx: add user space support for the TL-WDR4300
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32460 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-19 11:51:18 +00:00
b02b34668c
ar71xx: add support for the TL-WDR4300 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32459 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-19 11:51:17 +00:00
a0528dce26
ar71xx: refresh patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32458 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-19 11:51:15 +00:00
5745a7b08d
ar71xx: make AR8327 LEDs working on the DB120 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32457 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-19 10:44:17 +00:00
8d2d96fb1e
generic: ar8216: allow to configure AR8327 LEDs via platform data
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32456 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-19 10:44:16 +00:00
dd8a1c622f
ar71xx: remove superfluous include of asm/mach-ath79/pci.h
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32455 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-19 10:13:43 +00:00
224efc1850
ar71xx: add a common function to configure USB power GPIOs
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32454 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-19 10:13:41 +00:00
50527ff2b1
ar71xx: correctly detect NETGEAR WNDRMAC
...
This patch helps properly detect a WNDRMAC device. Before this
patch the model is detected as "NETGEAR ?????????N".
Signed-off-by: Roman A. aka BasicXP <x12ozmouse@ya.ru>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32453 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-19 10:13:38 +00:00
fb2e357234
ar71xx: add USB LED support by default for WNDR3700/WNDR3800/WNDRMAC
...
This adds kmod-leds-wndr3700-usb package to a default build for
WNDR3700, WNDR3800 and WNDRMAC in order to support the green USB LED.
Signed-off-by: Roman A. aka BasicXP <x12ozmouse@ya.ru>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32452 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-19 10:13:37 +00:00
baeafa83d2
ramips: rt305x: add support for the Petatel PSR-680W Wireless CDMA Router
...
This patch adds support for the Korean made Petatel PSR-680W Wireless CDMA Router.
The platform is based on Ralink RT3052.
http://wiki.openwrt.org/toh/petatel/psr-680w
Signed-off-by: Dmitry Shmygov <shmygov at rambler.ru>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32450 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-19 09:52:15 +00:00
dacb6839c0
ar71xx: add support for the embeddedwireless Dorin board (based on patch by embeddedwireless.de)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32447 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-19 00:22:04 +00:00
ec9f3a661f
ar71xx: add support for reading the MAC address from OTP ROM on AR933x
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32446 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-19 00:21:58 +00:00
e8596803e3
optimize kernel config for kvm_guest
...
This patch enables few extra kernel options for the kvm_guest subtarget:
- Tickless kernel to avoid timer ticks in idle guests, reduces CPU usage
- Enable paravirtualization steal time support
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32436 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-18 23:36:50 +00:00
07e87689fb
[kvm_guest] remove inittab override
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32422 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-18 11:50:37 +00:00
ffa83cc2dc
[brcm63xx] fix SPI message control handling for BCM6338/6348
...
BCM6338 and BCM6338 have their MSG_CONTROL register width of 8-bits instead of
16-bits. We were previously using a 16-bits write which corrupted the first
byte of the TX FIFO. Also the message type was always set to Full-duplex even
in the case of half-duplex messages.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32409 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-17 16:17:29 +00:00
1aa9a2c11f
kernel: replace the brcm47xx fuse workaround patches with a generic patch that applies to all mips targets
...
The dcache bug that it works around is a generic issue, not a brcm47xx cache quirk
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32395 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-16 21:06:33 +00:00
3761f17417
[rdc] remove broken flags
...
Thanks to Nicolas Le Falher for testing on Bifferboard.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32389 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-16 16:45:28 +00:00
b9a5139dc5
[x86] use ttyS0 @ 115200 baud as default for KVM guests
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32384 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-15 12:59:49 +00:00
67e7cb5f1d
kirkwood: fix typo in uci-defaults/leds
...
Signed-off-by: Martin Mueller <mm@sig21.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32343 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-13 18:41:42 +00:00
df713331bf
ar71xx: swap the PHY address of the ethernet port of TL-MR3040/TL-MR11U similar to TL-MR3020 to fix ethernet link detection
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32336 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-13 12:54:22 +00:00
4f488ee099
bcm63xx: readd accidentially dropped ignore_oc in ehci driver
...
fixes overcurrent warning spam on 3.3 kernels for bcm63xx again.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32221 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-11 22:24:58 +00:00
eecd31104d
kirkwood: ib62x0 fix reboot
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32131 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-08 23:17:46 +00:00
31f40ffa97
xburst: remove an obsolete CompareKernelPatchVer call
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32115 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-07 16:32:44 +00:00
3613a9f2f8
[brcm63xx] fix 553-board_96348w3.patch patch wrt gpio-keys-polled
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32096 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-06 20:58:45 +00:00
95a748c5b8
ar71xx: fix LZMA loader build regression from r32090 (thx, juhosg)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32095 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-06 19:37:49 +00:00
7dc116bbbc
kernel: add a few more tracing related symbols
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32094 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-06 18:04:00 +00:00
d591d58ff7
ar71xx: fix PHY setup on TL-MR3020 ( fixes #11572 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32093 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-06 17:24:12 +00:00
02b7e81b78
ar71xx: add a helper function for setting up PHY4 swapping on ar933x
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32092 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-06 17:24:09 +00:00
bd86f88b0a
ar71xx: only build all loader images if the image builder is enabled - saves some time on make target/install
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32090 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-06 17:24:01 +00:00
5153308130
[brcm63xx] fix alarm led color for board 96348A-122
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32089 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-06 16:07:46 +00:00
72aba7b527
[brcm63xx] add 96348w3 board ( #10764 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32088 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-06 15:45:04 +00:00
2e63f6da68
[brcm63xx] update livebox board support ( #8677 )
...
Merge most fixes from #8677 :
- add basic hardware detection of Livebox Blue 5g revisions
- register leds and gpio buttons
- fix boot address location
- properly parse mac addresses
Plus some more fixes:
- make board_livebox.c more in line with board_bcm963xx.c
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32087 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-06 15:44:56 +00:00
0abe5c6244
[brcm63xx] fix leds naming for all bcm63xx boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32086 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-06 15:44:52 +00:00
556a289006
kernel: make tracing support configurable
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32085 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-06 15:25:57 +00:00
cc14bc096e
[brcm63xx] backport upstream spi-bcm63xx fixes
...
* message pump conversion
* not using stopping state
* setting spi driver mode bits
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32078 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-06 13:31:33 +00:00
b3448742b9
[generic/3.3] backport spi message queue infrastructure
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32077 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-06 13:31:30 +00:00
0c59a91df5
[brcm63xx] increase led number in patch 301-led_count.patch
...
So that board patches are only touching board-related code
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32076 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-06 13:31:24 +00:00
ff53498dd2
[lantiq] clean up generic image building
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32065 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-05 17:49:42 +00:00
9f6ef16bdc
[brcm63xx] fix board patches so that new boards are withing appropriate ifdef
...
Some new board definitions were added within the #ifdef CONFIG_CPU_6338
section while some other were added within #ifdef CONFIG_CPU_6345, fix this
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32060 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-05 13:40:41 +00:00
18ad7d53f3
[kernel/3.3] refresh generic patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32059 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-05 13:40:38 +00:00
c349282eff
[brcm63xx] fix bisectability of patch 303-spi-board-info.patch
...
It uses spi_register_board_info() from linux/spi/spi.h but does not include it
explicitely.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32058 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-05 13:40:35 +00:00
266c70cdf4
[kernel] bump to 3.3.8
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32055 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-05 06:57:51 +00:00
321654ac94
kirkwood: reorganize target
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32053 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-05 00:43:56 +00:00
1a03c75de1
uboot-envtools: update to 2012.04.01
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32051 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-04 21:55:49 +00:00
7d6df5d239
bcm63xx: fix ethernet on 96328avng and 963281TAN
...
The internal switch did not get registered.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32041 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-04 08:35:25 +00:00
8cf477bc73
[lantiq] adds unset Kbuild symbol
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32026 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-02 14:03:32 +00:00
2338cf02a3
malta: remove 3.2 patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32023 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-02 12:06:28 +00:00
f55b4431ff
malta: use common kernel config
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32022 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-02 12:06:26 +00:00
4eb473784c
xburst: add missing config symbol
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32021 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-02 12:06:15 +00:00
c7942cd68f
[kernel] adds patch to make Tantos (psb6970) switch buildable again
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32006 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-30 17:41:28 +00:00
b032357e85
bcm63xx: build images for 6328 reference boards with various flash sizes
...
Build images for 96328avng and 963281TAN (untested) for three different
flash sizes: 4MB, 8MB, and 16MB.
Known issues:
* Button setup unknown, thus no fail-safe available.
* All other BCM6328 and BCM63XX issues
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32004 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-30 10:27:46 +00:00
e343446e23
bcm63xx: readd accidentially dropped network config for SPW303V
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32003 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-30 10:27:42 +00:00
8e8353898c
generic: ar8216: add revision specific PHY fixups for AR8327
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32000 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-29 16:39:27 +00:00
37ce7c5714
generic: ar8216: replace chip_type field with chip_{ver,rev} in ar8216_priv
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31999 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-29 16:39:26 +00:00
049f00ab72
generic: ar8216: add chip_is_ar8{216,236,316,327} helpers
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31998 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-29 16:39:24 +00:00
c91ffa0c10
ar71xx: add default LED setup for the DB120 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31997 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-29 16:39:23 +00:00
37d6b252ef
cns21xx: use the generic uci-default functions for initial LED setup
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31996 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-29 16:39:22 +00:00
66fca35779
lantiq: use the generic uci-default functions for initial LED setup
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31995 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-29 16:39:21 +00:00
e7cab28a32
kirkwood: use the generic uci-default functions for initial LED setup
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31994 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-29 16:39:20 +00:00
32b2b86076
ramips: use the generic uci-default functions for initial LED setup
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31993 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-29 16:39:18 +00:00
cceb4f9eb6
ar71xx: use the generic uci-default functions for initial LED setup
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31992 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-29 16:39:17 +00:00
1fe95ce50b
kirkwood: use uci-defaults to configure different boards
...
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31990 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-29 16:39:15 +00:00
84bbc1f8b0
ramips: WAN LED for D-Link DIR-300-B1
...
Add led devices for D-Link DIR-300-B1 WAN LED.
Note that the GPIO state is also ANDed with the esw switch port 4
LED state, which is why I've set the amber LED to default-on.
Closes: https://dev.openwrt.org/ticket/11326
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
[ juhosg:
- fix comment style in mach-dir-300-revb.c,
- remove the PPP specific LED setup, not everyone uses a PPP connection
on the WAN interface]
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31989 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-29 16:39:03 +00:00
7bf6009fe6
ar71xx: do not override the mdio clock for ar9330. the override value (obtained from an atheros driver) seems to break ethernet functionality
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31956 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-28 20:39:50 +00:00
55e7bd410c
ar71xx: improve rx performance of the ethernet driver by using build_skb to deliver a cache-hot skb to the network stack
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31934 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-28 02:55:59 +00:00
026245749a
ar71xx: fix MII clock settings for various chips, improves ethernet stability on AR934x
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31925 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 21:02:41 +00:00
2708355504
kernel: fix suppressing -s for linking modules when profiling is enabled
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31924 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 21:02:36 +00:00
4243897bf7
ar71xx: fix TL-WR1041 image size
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31923 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 17:21:47 +00:00
7613c70c38
ramips: rt3883: add device registration code for the SPI controller
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31922 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 17:10:00 +00:00
948640b4dd
ramips: allow to use the SPI driver on RT3662/RT3883
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31921 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 17:09:58 +00:00
dafda799dd
ramips: rt3883: fix GPIO reservation for the SPI pins
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31920 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 17:09:56 +00:00
c47535b3dc
ramips: rt305x: remove superfluous controller_data assignment
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31919 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 17:09:52 +00:00
ee236b9e96
ramips: make rt2x00 firmware extraction quiet
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31918 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 17:09:50 +00:00
54d14f8850
generic: rtl8367: rename a misnamed variable
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31917 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 17:09:47 +00:00
e4f7489ec1
generic: rtl8366_smi: remove duplicated spinlock initialization
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31916 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 17:09:45 +00:00
d89221e9ce
generic: rtl8366_smi: rename debugfs Kconfig symbol
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31915 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 17:09:43 +00:00
d57d3c1a10
generic: rtl8367: allow to use VLANs > 31
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31914 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 17:09:41 +00:00
c9b641b53d
[lantiq] move files-3.3 -> files
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31912 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 16:13:02 +00:00
78bf2cbd71
[lantiq] 3.2 R.I.P.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31911 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 16:12:59 +00:00
7ee1e4f822
[lantiq] dgn3500 support with eeprom loading from sysfs
...
WIFI eeprom:
As discussed, it is impossible for nand and spi flash platforms to have the eeprom data available from mtd. I suggested to load the eeprom from user-space. I've looked into regular firmware loading but this is only possible when using modules. I've created a sysfs entry that allows reading and writing the eeprom data to the platform data. After loading the eeprom data I rely on pci-hotplug support to disable the bogus pci device and rescan the bus (with fixups and all). Because hotplug is not available, an init script is created that performs the copy from mtd to platform data. I think it is best to eventually move the sysfs functions to dev_wifi_athxk.c file, this would get rid of the external to the ath9k platform data.
SPI flash:
It seems that the spi-xway driver is not really working. It causes my kernel to crash in all sorts of ways. I added to bitbang SPI to be able to the calibration data mention above.
I've kept the original mtd partitioning that Netgear uses.
Buttons/LED:
Both buttons are working properly. Two leds are not enabled: The red internet led is connected to the pci_gnt1 pin... I can't disable it because then DMA stops working.
The green wifi led is connected to an unknown atheros gpio.
Signed-off-by: Pieter Voorthuijsen <p.voorthuijsen at gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31910 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 16:02:22 +00:00
f2dfa4d3a4
[lantiq] fixes zyxel p2601hnfx
...
moves the linux partition, removes the config partition and the
buttons settings have small adjustments.
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31909 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 16:02:20 +00:00
9669f7a243
[lantiq] Add basic configuration for new board ZTE H201L. Still missing are button and led gpio values.
...
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31908 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 16:02:16 +00:00
260e2d8486
kernel: properly pad the allocated headroom in skb_cow to NET_SKB_PAD
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31906 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:16:37 +00:00
4f1451b47e
linux/3.2: R.I.P.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31905 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:37 +00:00
7e71e51d60
xburst: remove support for old kernels
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31904 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:35 +00:00
3a3b7f8beb
xburst: switch to 3.3 and add broken flag
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31903 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:33 +00:00
6aee5d7ee0
xburst: add support for 3.3
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31902 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:32 +00:00
335e441860
ppc44x: remove 3.2 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31901 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:30 +00:00
7239fa0db7
ppx44x: switch to 3.3 and add broken flag
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31900 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:28 +00:00
cad698f8fc
ppc44x: add support for 3.3
...
Compile tested only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31899 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:27 +00:00
312050717e
cobalt: switch to 3.3 and add broken flag
...
Compile tested only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31898 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:26 +00:00
85ac8f2fc1
ep93xx: remove 3.2 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31897 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:24 +00:00
fdd7fc1425
ep93xx: switch to 3.3 and add broken flag
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31896 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:23 +00:00
a21ef1e86d
ep93xx: add support for 3.3
...
Compile tested only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31895 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:21 +00:00
47555ae06c
au1000: remove 3.2 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31894 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:18 +00:00
480346bdcb
au1000: switch to 3.3 and add broken flag
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31893 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:17 +00:00
854bea7e28
au1000: add support for 3.3
...
Compile tested only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31892 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:15 +00:00
827fdc608c
linux/3.1: R.I.P.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31891 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:09 +00:00
8aea17b6d8
omap24xx: remove 3.1 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31890 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:07 +00:00
77cd6a37fe
omap24xx: switch to 3.3 and add broken flag
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31889 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:05 +00:00
cbc3cd7b0e
cns3xxx: remove 3.1 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31888 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:03 +00:00
9853f97374
cns3xxx: switch to 3.3 and add broken flag
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31887 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:02 +00:00
489514ce70
kernel: add a few patches for avoiding unnecessary skb reallocations - significantly improves ethernet<->wireless performance with mac80211 based drivers
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31886 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 14:43:58 +00:00
b93700be90
bcm63xx: build images for DSL-274XB revision F1
...
Build images for D-Link DSL-274XB revision F1. Flashing
through original web UI as well as CFE works.
Known issues:
* wifi led inverted (on when wifi is off and vice cersa)
* same issues as generic bcm6328 support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31885 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:51 +00:00
e4a82f8318
bcm63xx: add ath9k to atheros wifi profile
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31884 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:48 +00:00
2df17dbf20
bcm63xx: enable bcm6328 support and required drivers
...
BCM6328 support is in a usable state, with the following issues
* internal switch port not configurable
* external phys not supported
* broadcom wifis will probably not work correctly
* and all other generic bcm63xx issues (so yes, still no ADSL)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31883 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:46 +00:00
20cab203ed
bcm63xx: add support for DSL-274XB rev F1
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31882 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:43 +00:00
58de534f18
bcm63xx: fix port state after network down
...
bcm_enetsw_probe did not properly reset port states, resulting in
connected ports staying disabled after bringing up the interface the
second time.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31881 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:40 +00:00
9a873721da
bcm63xx: add a fixup for ath9k devices
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31880 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:37 +00:00
96ef7778af
bcm63xx: add support for the HSSPI controller
...
Add support for the HSSPI controller found on bcm6328 and SPI attached
flash.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31879 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:33 +00:00
5b950415b8
bcm63xx: add preliminary support for bcm6328
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31878 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:29 +00:00
bf8af3c6f2
bcm63xx: add flash type detection
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31877 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:25 +00:00
afb39de7d0
bcm63xx: pad Speedport W303 V images to 4 MiB
...
Prevents CFE from flashing to the second image offset. Fix up the rootfs
length on first boot else CFE will complain.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31876 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:22 +00:00
4ecf7d09a1
bcm63xx: add a default switch configuration for DSL-274XB
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31874 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:17 +00:00
4abdddf848
bcm63xx: setup network config through uci-defaults
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31873 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:14 +00:00
6082cee9d6
bcm63xx: move the board name workaround to /lib/brcm63xx.sh
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31872 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:11 +00:00
1148159a4f
bcm63xx: use the exact board id as board identification string
...
No need to keep the bcm63xx/ at the start or the chipid info at the end.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31871 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:08 +00:00
0b257a6c10
kernel: fix a warning in the connmark module
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31856 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-24 18:25:08 +00:00
e100214e23
kernel: update linux 3.3 to 3.3.7
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31848 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-23 21:05:32 +00:00
0730d9fbb8
ar71xx: fix an insignificant typo
...
Patch from #11485 .
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31847 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-23 21:05:30 +00:00
3412f35035
ar71xx: fix WLAN led for RB751U-2HnD and RB751G-2HnD
...
Patch by Kamil Trzciński <ayufan@osk-net.pl>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31846 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-23 21:05:25 +00:00
d9f7205aa4
ar71xx: add support for TP-Link TL-MR3040
...
Support for TP-Link TL-MR3040. Power LED not working - always on red, after
start should be green.
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31845 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-23 21:05:24 +00:00
db37661614
ramips: Add byte queue limits support to net/ethernet/ramips_main.c
...
Add byte queue limits support to net/ethernet/ramips_main.c
"Byte queue limits are a mechanism to limit the size of the transmit
hardware queue on a NIC by number of bytes. The goal of these byte
limits is too reduce latency (HOL blocking) caused by excessive
queuing in hardware (aka buffer bloat) without sacrificing
throughput."
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31844 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-23 21:05:23 +00:00
713c364289
ramips: Enable sysupgrade for Sitecom WL-351
...
Sysupgrade works just fine on my Sitecom WL-351 after adding this
oneliner.
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31843 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-23 21:05:22 +00:00
831c677efc
linux/3.3: avoid recursive calling of mtd_writev in the block2mtd driver
...
Should fix #11513 . Tested with the x86/generic squashfs image within a VM.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31841 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-23 21:05:19 +00:00
192dbdd2f5
lantiq: allow platforms with rt2x00 to override the mac address without overriding eeprom, fixes bogus wlan mac address on arv4520
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31835 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-20 21:58:03 +00:00
b21bdefb82
kernel: merge a net-next fq_codel backlog handling fix
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31813 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 22:12:15 +00:00
bfdcb53577
omap24xx: add support for 3.3
...
Compile tested only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31810 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 20:22:32 +00:00
020b994103
cns3xxx: add support for 3.3
...
Compile tested only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31809 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 20:10:53 +00:00
67ea71e397
linux/2.6.39: R.I.P.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31808 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 20:10:51 +00:00
e738b2550a
cns3xxx: sync kernel config
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31807 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 20:10:48 +00:00
a24db87f22
cns3xxx: remove 2.6.39 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31806 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 20:10:46 +00:00
07e53bcad1
cns3xxx: switch to 3.1
...
Compile tested only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31805 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 20:10:44 +00:00
b7b3fce329
x86: remove support for old kernels
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31804 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 20:10:42 +00:00
7503ab47c1
x86: remove subtarget specific LINUX_VERSION overrides
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31803 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 20:10:38 +00:00
a5c66329a0
x86/ep80579: switch to 3.3
...
Also fix build errors in the ep80579-drivers package.
Compile tested only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31802 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 20:10:33 +00:00
6a07b477c0
brcm47xx: fix nvram read out on devices with serial flash
...
detect nvram on Linksys E3200
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31790 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 16:04:10 +00:00
1dd74eea6b
brcm47xx: bcma: fix null pointer
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31789 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 15:46:30 +00:00
972c918b16
brcm47xx: ssb: recognize ARM Cortex M3
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31788 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 15:45:51 +00:00
fd3e6d0687
brcm47xx: some fixes for the USB driver
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31787 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 15:44:25 +00:00
111aa40027
cobalt: remove 2.6.39 specific patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31785 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 09:59:22 +00:00
715476a93a
x86/olpc: switch to 3.3
...
Compile tested only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31784 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 09:57:32 +00:00
0a3596481b
x86: image: select bootscript images by default for OLPC
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31783 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 09:57:29 +00:00
2a0cc9a89b
adm5120: add missing config symbols for the rb1xx subtarget, fixes #11407
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31781 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-17 21:20:23 +00:00
06370f57c1
kernel: add some missing config options added by r31756
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31774 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-17 13:28:30 +00:00
f9cfc0fd4a
kernel: ssb/bcma: update to version from wireless-testing tag master-2012-05-16-2
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31772 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-17 13:22:38 +00:00
20de9681f0
brcm47xx: remove support for kernel 3.2
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31771 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-17 13:20:10 +00:00
bee7068b92
x86/thincan: switch to 3.3
...
Compile tested only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31765 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-17 06:41:01 +00:00
6cfdf98882
x86/xen_domu: switch to 3.3
...
Compile tested only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31764 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-17 06:41:00 +00:00
dec6db1eb1
x86/kvm_guest: switch to 3.3
...
Compile tested only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31763 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-17 06:40:58 +00:00
34e5c69695
x86/generic: switch to 3.3
...
Compile tested only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31762 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-17 06:40:56 +00:00
0c6a3e365f
kernel: add codel and fq_codel to generic 3.3 patch set (based on patch by Dave Täht)
...
Codel is a new AQM algorithm and RED replacement designed by
Kathie Nichols and Van Jacobson, and published in ACM queue:
http://queue.acm.org/detail.cfm?id=2209336
Codel stands for "Controlled Delay", and needs no knobs in the
general case, twiddled, for optimum results. It aims for 5ms of
delay, at most, when in use.
Additionally,
fq_codel (by eric dumazet) builds on codel to provide fair queuing
superior to what could be had with SFQ, and drop behavior saner
than RED, BLUE, or choke.
These patches are backported from net-next and are known to work
on Linux 3.3.4 and later.
Includes updates to codel for better portability and speed
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31756 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-16 15:23:03 +00:00
c3340cff15
x86/alix2: switch to 3.3
...
Compile tested only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31753 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-16 10:45:02 +00:00
d65bd1499c
x86/net5501: switch to 3.3
...
Compile tested only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31752 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-16 10:44:59 +00:00
6c0225b8c5
x86: sync 3.3 configs
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31751 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-16 10:44:55 +00:00
3345e73573
x86: sync 3.2 configs
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31750 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-16 10:44:52 +00:00
8ace34552a
x86: sync 2.6.39 configs
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31749 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-16 10:44:49 +00:00
4cd69e320c
linux/3.3: add missing symbol
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31748 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-16 10:44:46 +00:00
880547fc5a
linux: add CONFIG_POWER_SUPPLY_DEBUG symbol
...
It was missing in the previous commit.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31738 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-15 11:12:31 +00:00
cb4c118e50
linux: move certain disabled symbols to the generic configs
...
* CONFIG_ARCH_DMA_ADDR_T_64BIT
* CONFIG_ARCH_HAS_ILOG2_U32
* CONFIG_ARCH_HAS_ILOG2_U64
* CONFIG_ARCH_PHYS_ADDR_T_64BIT
* CONFIG_ARCH_SUPPORTS_MSI
* CONFIG_GENERIC_CPU_DEVICES
* CONFIG_HWMON_DEBUG_CHIP
* CONFIG_I2C_PXA_PCI
* CONFIG_LEDS_GPIO
* CONFIG_MINIX_FS_NATIVE_ENDIAN
* CONFIG_MLX4_CORE
* CONFIG_POWER_SUPPLY
* CONFIG_POWER_SUPPLY_DEBUG
* CONFIG_QUOTACTL
* CONFIG_SDIO_UART
* CONFIG_SENSORS_K10TEMP
* CONFIG_SENSORS_SCH56XX_COMMON
* CONFIG_SENSORS_VIA_CPUTEMP
* CONFIG_SERIO_AMBAKMI
* CONFIG_SERIO_I8042
* CONFIG_SERIO_LIBPS2
* CONFIG_SERIO_PCIPS2
* CONFIG_SERIO_RAW
* CONFIG_SERIO_SERPORT
* CONFIG_SPI_BITBANG
* CONFIG_SPI_GPIO
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31737 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-15 10:58:52 +00:00
f47ed77684
ar71xx: remove AG71XX_RX_PKT_RESERVE, it is no longer necessary (found by Eric Dumazet)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31736 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-15 10:36:39 +00:00
e6d50dae72
[lantiq] code style cleanup of the mach files
...
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31735 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-15 09:38:05 +00:00
499d5b1ca6
[lantiq] adds zyxel p2601hnfx support
...
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31734 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-15 09:38:02 +00:00
d92ae2699f
[lantiq] set 3.3.6 as default
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31733 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-15 09:37:59 +00:00
27cb15eccd
[lantiq] set 3.3.5 as default
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31718 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-14 16:11:26 +00:00
9391118ede
linux/3.0: R.I.P.
...
It is used by the broken omap35xx/gumstix target only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31717 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-14 15:48:34 +00:00
bd604be582
realview: remove 3.0 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31716 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-14 15:48:32 +00:00
67e61e5edf
realview: switch to 3.3
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31715 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-14 15:48:31 +00:00
0c668d6c68
realview: add 3.3 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31714 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-14 15:48:29 +00:00
8e347885d6
linux/3.3: more missing config symbols
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31713 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-14 15:48:23 +00:00
b2a6c43e1c
kernel: add CONFIG_BLK_DEV_PCIESSD_MTIP32XX
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31710 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-14 11:28:02 +00:00
cc87185921
kernel: update linux 3.3 to 3.3.6
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31709 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-14 09:18:32 +00:00
4472c6f51b
amazon: fix section mismatch
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31707 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-13 15:31:42 +00:00
e46bb17d6e
amazon: update amazon target to kernel 3.3
...
This is just compile tested, my device is currently not working.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31706 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-13 15:10:40 +00:00
Felix Fietkau
Imre Kaloz
Hauke Mehrtens
Florian Fainelli
Gabor Juhos
Daniel Dickinson
John Crispin
Jo-Philipp Wich
Jonas Gorski
Luka Perkov
Vasilis Tsiligiannis
Mirko Vogt