[orion] generic: enhanced image Makefile
* Creation of uImage for WNR854T only done once (before 2x for jffs2 build and 1x for squashfs build) * Got rid of unneccessary padding of rootfs partition * ARM zImages always need a machine id, therefore do not copy generic (=no id) uImage to BIN_DIR, instead copy zImage * Generalized functions for easier re-using and enhancing (e.g. D-Link DNS 323 implementation would be only a couple lines) * Copy rootfs partitions to BIN_DIR, just like it is done for D-Link DNS 323 * Use variables to allows easily changing for custom builds, e.g. kernel mtd size for symbols * Size check of kernel files to avoid builds that break devices * Use for "-sysupgrade" and "-factory" in image names (like ar71xx, brcm63xx, etc.) to avoid questions about which image to use Signed-off by: Matthias Buecher <mail@maddes.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33174 3c298f89-4303-0410-b956-a3cf2f4a3e73master
Florian Fainelli
parent
b61a375cfa
commit
2af03272d3
|
|
@ -1,5 +1,5 @@
|
|||
#
|
||||
# Copyright (C) 2008-2011 OpenWrt.org
|
||||
# Copyright (C) 2008-2012 OpenWrt.org
|
||||
#
|
||||
# This is free software, licensed under the GNU General Public License v2.
|
||||
# See /LICENSE for more information.
|
||||
|
|
@ -12,91 +12,207 @@
|
|||
|
||||
### use round brackets for make variables, and curly brackets for shell variables
|
||||
|
||||
|
||||
## Kernel mtd partition size in KiB
|
||||
KERNEL_MTD_SIZE:=1024
|
||||
|
||||
# Netgear WNR854T: erase size is 128KiB = 0x00020000 = 131072
|
||||
ERASE_SIZE_WNR854T:=128
|
||||
UIMAGE_FILE_NAME_WNR854T:=uImage
|
||||
|
||||
# Linksys WRT350N v2: erase size is 64KiB = 0x00010000 = 65536
|
||||
ERASE_SIZE_WRT350Nv2:=64
|
||||
|
||||
# define JFFS2 sizes for include/image.mk
|
||||
JFFS2_BLOCKSIZE:=64k 128k
|
||||
|
||||
|
||||
###
|
||||
### Image/Prepare
|
||||
###
|
||||
|
||||
define Image/Prepare
|
||||
### Dummy comment for indented calls of Image/Prepare
|
||||
cp $(LINUX_DIR)/arch/arm/boot/uImage $(KDIR)/uImage
|
||||
cp '$(LINUX_DIR)/arch/arm/boot/zImage' '$(BIN_DIR)/$(IMG_PREFIX)-zImage'
|
||||
endef
|
||||
|
||||
|
||||
###
|
||||
### Image/BuildKernel
|
||||
###
|
||||
|
||||
define Image/BuildKernel
|
||||
### Dummy comment for indented calls of Image/BuildKernel
|
||||
# Orion Kernel uImages
|
||||
# WRT350N v2: mach id 1633 (0x661)
|
||||
echo -en "\x06\x1c\xa0\xe3\x61\x10\x81\xe3" > $(KDIR)/wrt350nv2-zImage
|
||||
cat $(LINUX_DIR)/arch/arm/boot/zImage >> $(KDIR)/wrt350nv2-zImage
|
||||
$(STAGING_DIR_HOST)/bin/mkimage -A arm -O linux -T kernel \
|
||||
-C none -a 0x00008000 -e 0x00008000 -n 'Linux-$(LINUX_VERSION)' \
|
||||
-d $(KDIR)/wrt350nv2-zImage $(KDIR)/wrt350nv2-uImage
|
||||
cp $(KDIR)/wrt350nv2-uImage $(BIN_DIR)/openwrt-wrt350nv2-uImage
|
||||
# WNR854T: mach id 1801 (0x709)
|
||||
echo -en "\x07\x1c\xa0\xe3\x09\x10\x81\xe3" > $(KDIR)/wnr854t-zImage
|
||||
cat $(LINUX_DIR)/arch/arm/boot/zImage >> $(KDIR)/wnr854t-zImage
|
||||
$(STAGING_DIR_HOST)/bin/mkimage -A arm -O linux -T kernel \
|
||||
-C none -a 0x00008000 -e 0x00008000 -n 'Linux-$(LINUX_VERSION)' \
|
||||
-d $(KDIR)/wnr854t-zImage $(KDIR)/wnr854t-uImage
|
||||
cp $(KDIR)/wnr854t-uImage $(BIN_DIR)/openwrt-wnr854t-uImage
|
||||
|
||||
## Netgear WNR854T: mach id 1801 (0x0709)
|
||||
$(call Image/BuildKernel/ARM/zImage,wnr854t,"\x07\x1c\xa0\xe3\x09\x10\x81\xe3")
|
||||
$(call Image/BuildKernel/ARM/uImage,wnr854t)
|
||||
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),y) # nothing more to do for a ramdisk build
|
||||
$(call Image/BuildKernel/JFFS2uImage,wnr854t,$(ERASE_SIZE_WNR854T),$(UIMAGE_FILE_NAME_WNR854T))
|
||||
$(call Image/Default/FileSizeCheck,$(KDIR)/wnr854t-uImage.jffs2,$(shell expr $(KERNEL_MTD_SIZE) \* 1024))
|
||||
endif
|
||||
|
||||
## Linksys WRT350N v2: mach id 1633 (0x0661)
|
||||
$(call Image/BuildKernel/ARM/zImage,wrt350nv2,"\x06\x1c\xa0\xe3\x61\x10\x81\xe3")
|
||||
$(call Image/BuildKernel/ARM/uImage,wrt350nv2)
|
||||
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),y) # nothing more to do for a ramdisk build
|
||||
$(call Image/Default/FileSizeCheck,$(KDIR)/wrt350nv2-uImage,$(shell expr $(KERNEL_MTD_SIZE) \* 1024))
|
||||
endif
|
||||
endef
|
||||
|
||||
define Image/Build/Netgear
|
||||
# Orion Netgear Images
|
||||
mkdir $(KDIR)/netgear_image
|
||||
cp $(KDIR)/wnr854t-uImage $(KDIR)/netgear_image/uImage
|
||||
$(STAGING_DIR_HOST)/bin/mkfs.jffs2 -m none -p -l -q -e 128KiB -o $(KDIR)/wnr854t-uImage.jffs2 -d $(KDIR)/netgear_image
|
||||
rm -rf $(KDIR)/netgear_image
|
||||
( \
|
||||
dd if=$(KDIR)/wnr854t-uImage.jffs2 bs=1024k conv=sync; \
|
||||
dd if=$(KDIR)/root.$(1) bs=128k conv=sync; \
|
||||
) > $(BIN_DIR)/openwrt-$(2)-$(1).img
|
||||
$(STAGING_DIR_HOST)/bin/add_header $(3) $(BIN_DIR)/openwrt-$(2)-$(1).img $(BIN_DIR)/openwrt-$(2)-$(1)-webupgrade.img
|
||||
define Image/BuildKernel/ARM/zImage
|
||||
# merge machine id and regular zImage into one file
|
||||
# parameters: 1 = machine name, 2 = machine id as string in quotes
|
||||
# $(BOARD) kernel zImage for $(1)
|
||||
echo -en $(2) > '$(KDIR)/$(1)-zImage'
|
||||
cat '$(LINUX_DIR)/arch/arm/boot/zImage' >> '$(KDIR)/$(1)-zImage'
|
||||
cp '$(KDIR)/$(1)-zImage' '$(BIN_DIR)/openwrt-$(1)-zImage'
|
||||
endef
|
||||
|
||||
define Image/Build/Linksys
|
||||
# Orion Linksys Images
|
||||
# sysupgrade image
|
||||
( \
|
||||
dd if="${KDIR}/$2-uImage" bs=$5 conv=sync; \
|
||||
dd if="${KDIR}/root.$1" bs=64k conv=sync; \
|
||||
) > "${BIN_DIR}/openwrt-$2-$1.img"
|
||||
# recovery image and webupgrade image for stock firmware
|
||||
rm -rf "${TMP_DIR}/$2_webupgrade"
|
||||
mkdir "${TMP_DIR}/$2_webupgrade"
|
||||
# create parameter file
|
||||
echo ':image 0 $(BIN_DIR)/openwrt-$(2)-$(1).img' >'$(TMP_DIR)/$(2)_webupgrade/$(2).par'
|
||||
[ ! -f "$(STAGING_DIR_HOST)/share/wrt350nv2-builder/u-boot.bin" ] || ( \
|
||||
echo ":u-boot 0 $(STAGING_DIR_HOST)/share/wrt350nv2-builder/u-boot.bin" >>"${TMP_DIR}/$2_webupgrade/$2.par"; )
|
||||
echo "#version 0x2020" >>"${TMP_DIR}/$2_webupgrade/$2.par"
|
||||
# create bin file for recovery and webupgrade image
|
||||
( cd "${TMP_DIR}/$2_webupgrade"; \
|
||||
"${STAGING_DIR_HOST}/bin/wrt350nv2-builder" \
|
||||
-v -b "${TMP_DIR}/$2_webupgrade/$2.par"; \
|
||||
)
|
||||
# copy bin file as recovery image
|
||||
$(CP) "${TMP_DIR}/$2_webupgrade/wrt350n.bin" "$(BIN_DIR)/openwrt-$2-$1-recovery.bin"
|
||||
# create webupgrade image for stock firmware update mechanism
|
||||
( cd '$(TMP_DIR)/$(2)_webupgrade'; \
|
||||
zip 'wrt350n.zip' 'wrt350n.bin'; \
|
||||
)
|
||||
"${STAGING_DIR_HOST}/bin/wrt350nv2-builder" -v -z "${TMP_DIR}/$2_webupgrade/wrt350n.zip" "${BIN_DIR}/openwrt-$2-$1-webupgrade.img"
|
||||
rm -rf "${TMP_DIR}/$2_webupgrade"
|
||||
define Image/BuildKernel/ARM/uImage
|
||||
# create uImage from zImage
|
||||
# parameters: 1 = machine name
|
||||
# $(BOARD) kernel uImage for $(1)
|
||||
'$(STAGING_DIR_HOST)/bin/mkimage' -A arm -O linux -T kernel \
|
||||
-C none -a 0x00008000 -e 0x00008000 -n 'Linux-$(LINUX_VERSION)' \
|
||||
-d '$(KDIR)/$(1)-zImage' '$(KDIR)/$(1)-uImage'
|
||||
cp '$(KDIR)/$(1)-uImage' '$(BIN_DIR)/openwrt-$(1)-uImage'
|
||||
endef
|
||||
|
||||
define Image/BuildKernel/JFFS2uImage
|
||||
# create JFFS2 partition with uImage file (result is already padded to erase size)
|
||||
# parameters: 1 = machine name, 2 = erase size in KiB, 3 = uImage file name
|
||||
# $(BOARD) kernel uImage for $(1) in JFFS2-$(2)k partition
|
||||
rm -rf '$(TMP_DIR)/$(1)_jffs2_uimage'
|
||||
mkdir '$(TMP_DIR)/$(1)_jffs2_uimage'
|
||||
cp '$(KDIR)/$(1)-uImage' '$(TMP_DIR)/$(1)_jffs2_uimage/$(3)'
|
||||
$(STAGING_DIR_HOST)/bin/mkfs.jffs2 --compression-mode=none --pad --little-endian --squash -e $(2)KiB -o '$(KDIR)/$(1)-uImage.jffs2' -d '$(TMP_DIR)/$(1)_jffs2_uimage'
|
||||
rm -rf '$(TMP_DIR)/$(1)_jffs2_uimage'
|
||||
endef
|
||||
|
||||
define Image/Default/FileSizeCheck
|
||||
# parameters: 1 = file path, 2 = maximum size in bytes
|
||||
[ `stat -c %s '$(1)'` -le $(2) ] || { echo ' ERROR: $(1) too big (> $(2) bytes)'; exit 1; }
|
||||
endef
|
||||
|
||||
|
||||
###
|
||||
### Image/Build
|
||||
###
|
||||
|
||||
define Image/Build
|
||||
### Dummy comment for indented calls of Image/Build with $(1)
|
||||
|
||||
## Prepare rootfs
|
||||
$(call Image/Build/$(1),$(1))
|
||||
$(call Image/Build/Netgear,$(1),wnr854t,NG_WNR854T,$(1))
|
||||
# Leave WRT350Nv2 at last position due to webimage dependency for zip
|
||||
# 5th parameter is kernel mtd size, e.g. 0x00100000 = 1048576 or 0x001A0000 = 1703936
|
||||
$(call Image/Build/Linksys,$(1),wrt350nv2,WNR350Nv2,$(1),1048576)
|
||||
|
||||
## Netgear WNR854T
|
||||
$(call Image/Build/Default,$(1),wnr854t,$(ERASE_SIZE_WNR854T),$(KERNEL_MTD_SIZE),.jffs2,NG_WNR854T)
|
||||
|
||||
## Linksys WRT350N v2
|
||||
$(call Image/Build/Linksys/wrt350nv2,$(1),wrt350nv2,$(ERASE_SIZE_WRT350Nv2),$(KERNEL_MTD_SIZE),)
|
||||
endef
|
||||
|
||||
define Image/Build/squashfs
|
||||
$(call prepare_generic_squashfs,$(KDIR)/root.squashfs)
|
||||
( \
|
||||
dd if=$(KDIR)/uImage bs=1024k conv=sync; \
|
||||
dd if=$(KDIR)/root.$(1) bs=128k conv=sync; \
|
||||
) > $(BIN_DIR)/$(IMG_PREFIX)-$(1).img
|
||||
cp '$(KDIR)/root.squashfs' '$(BIN_DIR)/$(IMG_PREFIX)-root.squashfs'
|
||||
endef
|
||||
|
||||
# Dependency for WRT350N v2 webupgrade image
|
||||
## generate defines for all JFFS2 block sizes
|
||||
define Image/Build/jffs2/sub
|
||||
$(eval define Image/Build/jffs2-$(1)
|
||||
cp '$$(KDIR)/root.jffs2-$(1)' '$$(BIN_DIR)/$$(IMG_PREFIX)-root.jffs2-$(1)'
|
||||
endef)
|
||||
endef
|
||||
|
||||
$(foreach SZ,$(JFFS2_BLOCKSIZE),$(call Image/Build/jffs2/sub,$(SZ)))
|
||||
|
||||
define Image/Build/Default
|
||||
# parameters: 1 = rootfs type, 2 = machine name, 3 = erase size in KiB, 4 = kernel mtd size in KiB, 5 = kernel file suffix, 6 = header
|
||||
ifeq ($(findstring jffs2-,$(1)),jffs2-) # JFFS2: build only image fitting to erase size
|
||||
ifeq ($(1),jffs2-$(3)k)
|
||||
$(call Image/Build/Default/sysupgrade,$(1),$(2),$(4),$(5))
|
||||
$(call Image/Build/Default/factory,$(1),$(2),$(6))
|
||||
endif
|
||||
else
|
||||
ifeq ($(1),ext4) # EXT4: ignore
|
||||
# do nothing
|
||||
else # do all other images
|
||||
$(call Image/Build/Default/sysupgrade,$(1),$(2),$(4),$(5))
|
||||
$(call Image/Build/Default/factory,$(1),$(2),$(6))
|
||||
endif
|
||||
endif
|
||||
endef
|
||||
|
||||
define Image/Build/Default/sysupgrade
|
||||
# parameters: 1 = rootfs type, 2 = machine name, 3 = pad size in KiB (kernel mtd size or erase size), 4 = kernel file suffix
|
||||
# $(BOARD) $(1) sysupgrade image for $(2)
|
||||
( \
|
||||
dd if='$(KDIR)/$(2)-uImage$(4)' bs=$(3)k conv=sync; \
|
||||
dd if='$(KDIR)/root.$(1)'; \
|
||||
) > '$(BIN_DIR)/openwrt-$(2)-$(1)-sysupgrade.img'
|
||||
endef
|
||||
|
||||
define Image/Build/Default/factory
|
||||
# parameters: 1 = rootfs type, 2 = machine name, 3 = header
|
||||
# $(BOARD) $(1) factory upgrade image for $(2)
|
||||
'$(STAGING_DIR_HOST)/bin/add_header' $(3) '$(BIN_DIR)/openwrt-$(2)-$(1)-sysupgrade.img' '$(BIN_DIR)/openwrt-$(2)-$(1)-factory.img'
|
||||
endef
|
||||
|
||||
##
|
||||
## Image/Build/Linksys
|
||||
##
|
||||
|
||||
define Image/Build/Linksys/wrt350nv2
|
||||
# parameters: 1 = rootfs type, 2 = machine name, 3 = erase size in KiB, 4 = kernel mtd size in KiB, 5 = kernel file suffix
|
||||
ifeq ($(findstring jffs2-,$(1)),jffs2-) # JFFS2: build only image fitting to erase size
|
||||
ifeq ($(1),jffs2-$(3)k)
|
||||
$(call Image/Build/Default/sysupgrade,$(1),$(2),$(4),$(5))
|
||||
$(call Image/Build/Linksys/wrt350nv2-builder,$(1),$(2))
|
||||
endif
|
||||
else
|
||||
ifeq ($(1),ext4) # EXT4: ignore
|
||||
# do nothing
|
||||
else # do all other images
|
||||
$(call Image/Build/Default/sysupgrade,$(1),$(2),$(4),$(5))
|
||||
$(call Image/Build/Linksys/wrt350nv2-builder,$(1),$(2))
|
||||
endif
|
||||
endif
|
||||
endef
|
||||
|
||||
define Image/Build/Linksys/wrt350nv2-builder
|
||||
# parameters: 1 = rootfs type, 2 = machine name
|
||||
# $(BOARD) $(1) factory and recovery image for $(2) via wrt350nv2-builder
|
||||
rm -rf '$(TMP_DIR)/$(2)_factory'
|
||||
mkdir '$(TMP_DIR)/$(2)_factory'
|
||||
# create parameter file
|
||||
echo ':image 0 $(BIN_DIR)/openwrt-$(2)-$(1)-sysupgrade.img' > '$(TMP_DIR)/$(2)_factory/$(2).par'
|
||||
[ ! -f '$(STAGING_DIR_HOST)/share/wrt350nv2-builder/u-boot.bin' ] || ( \
|
||||
echo ':u-boot 0 $(STAGING_DIR_HOST)/share/wrt350nv2-builder/u-boot.bin' >> '$(TMP_DIR)/$(2)_factory/$(2).par'; \
|
||||
)
|
||||
echo '#version 0x2020' >> '$(TMP_DIR)/$(2)_factory/$(2).par'
|
||||
# create bin file for recovery and factory image
|
||||
( \
|
||||
cd '$(TMP_DIR)/$(2)_factory'; \
|
||||
'$(STAGING_DIR_HOST)/bin/wrt350nv2-builder' -b '$(TMP_DIR)/$(2)_factory/$(2).par'; \
|
||||
)
|
||||
# copy bin file as recovery image
|
||||
$(CP) '$(TMP_DIR)/$(2)_factory/wrt350n.bin' '$(BIN_DIR)/openwrt-$(2)-$(1)-recovery.bin'
|
||||
# create factory image for stock firmware update mechanism
|
||||
( \
|
||||
cd '$(TMP_DIR)/$(2)_factory'; \
|
||||
zip 'wrt350n.zip' 'wrt350n.bin'; \
|
||||
)
|
||||
'$(STAGING_DIR_HOST)/bin/wrt350nv2-builder' -z '$(TMP_DIR)/$(2)_factory/wrt350n.zip' '$(BIN_DIR)/openwrt-$(2)-$(1)-factory.img'
|
||||
rm -rf '$(TMP_DIR)/$(2)_factory'
|
||||
endef
|
||||
|
||||
|
||||
###
|
||||
### Image/PreReq
|
||||
###
|
||||
|
||||
## Dependency for WRT350N v2 factory image
|
||||
$(eval $(call RequireCommand,zip, \
|
||||
Please install zip. \
|
||||
))
|
||||
|
|
|
|||
Loading…
Reference in New Issue