hak5
/
wifipineapple-openwrt
mirror of https://github.com/hak5/wifipineapple-openwrt.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

ramips: rt305x: add support for Edimax 3G-6200N 

Support for Edimax 3G-6200N router with USB.

Signed-off-by: Lukasz Golebiowski <lgolebio@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32682 3c298f89-4303-0410-b956-a3cf2f4a3e73
master
Gabor Juhos 2012-07-12 13:29:46 +00:00
parent 5327743b32
commit cb32e76a01
13 changed files with 122 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
target/linux/ramips/base-files/etc/diag.sh
View File

@ -30,6 +30,9 @@ status_led_off() {
get_status_led() {
case $(ramips_board_name) in
3g-6200n)
status_led="edimax:green:power"
;;
argus-atp52b)
status_led="argus-atp52b:green:run"
;;

1
target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
View File

@ -48,6 +48,7 @@ case "$FIRMWARE" in
rt2x00_eeprom_extract "u-boot" 262144 272
;;
3g-6200n | \
all0256n | \
argus-atp52b | \
bc2 | \

4
target/linux/ramips/base-files/etc/uci-defaults/leds
View File

@ -14,6 +14,10 @@ set_wifi_led() {
board=$(ramips_board_name)
case $board in
3g-6200n)
set_wifi_led "edimax:amber:wlan"
set_usb_led "edimax:blue:3g"
;;
all0256n)
set_wifi_led "rt2800pci-phy0::radio"
;;

3
target/linux/ramips/base-files/etc/uci-defaults/network
View File

@ -21,6 +21,7 @@ ramips_setup_interfaces()
ucidef_set_interface_lan "eth0.1"
;;
3g-6200n | \
argus-atp52b | \
b2c | \
nw718 | \
@ -89,7 +90,7 @@ ramips_setup_macs()
all0256n)
lan_mac=$(ramips_get_mac_binary factory 40)
;;
3g-6200n | \
argus-atp52b | \
b2c | \
f5d8235-v1 | \

4
target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
View File

@ -8,6 +8,10 @@ preinit_set_mac_address() {
. /lib/ramips.sh
case $(ramips_board_name) in
3g-6200n)
mac=$(ramips_get_mac_binary factory 4)
ifconfig eth0 hw ether $mac 2>/dev/null
;;
bc2 |\
esr-9753 |\
freestation5 |\

3
target/linux/ramips/base-files/lib/ramips.sh
View File

@ -47,6 +47,9 @@ ramips_board_name() {
machine=$(awk 'BEGIN{FS="[ \t]+:[ \t]"} /machine/ {print $2}' /proc/cpuinfo)
case "$machine" in
*"Edimax 3g-6200n")
name="3g-6200n"
;;
*"Allnet ALL0256N")
name="all0256n"
;;

1
target/linux/ramips/base-files/lib/upgrade/platform.sh
View File

@ -14,6 +14,7 @@ platform_check_image() {
[ "$ARGC" -gt 1 ] && return 1
case "$board" in
3g-6200n | \
all0256n | \
bc2 | \
dir-300-b1 | \

1
target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h
View File

@ -21,6 +21,7 @@ enum ramips_mach_type {
RAMIPS_MACH_WZR_AGL300NH, /* Buffalo WZR-AGL300NH */
/* RT3050 based machines */
RAMIPS_MACH_3G_6200N, /* Edimax 3G-6200N */
RAMIPS_MACH_ALL0256N, /* Allnet ALL0256N */
RAMIPS_MACH_DIR_300_B1, /* D-Link DIR-300 B1 */
RAMIPS_MACH_DIR_600_B1, /* D-Link DIR-600 B1 */

5
target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig
View File

@ -2,6 +2,11 @@ if RALINK_RT305X
menu "Ralink RT350x machine selection"
config RT305X_MACH_3G_6200N
bool "Edimax 3G-6200N board support"
select RALINK_DEV_GPIO_BUTTONS
select RALINK_DEV_GPIO_LEDS
config RT305X_MACH_WR6202
bool "Accton WR6202"
select RALINK_DEV_GPIO_BUTTONS

1
target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile
View File

@ -11,6 +11,7 @@ obj-y := irq.o setup.o devices.o rt305x.o clock.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
obj-$(CONFIG_RT305X_MACH_3G_6200N) += mach-3g-6200n.o
obj-$(CONFIG_RT305X_MACH_ARGUS_ATP52B) += mach-argus-atp52b.o
obj-$(CONFIG_RT305X_MACH_BC2) += mach-bc2.o
obj-$(CONFIG_RT305X_MACH_ALL0256N) += mach-all0256n.o

86
target/linux/ramips/files/arch/mips/ralink/rt305x/mach-3g-6200n.c Normal file
View File

@ -0,0 +1,86 @@
/*
* Edimax 3g-6200n board support
*
* Copyright (C) 2011 Andrzej Hajda <andrzej.hajda@wp.pl>
* Copyright (C) 2012 Lukasz Golebiowski <lgolebio@gmail.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/init.h>
#include <linux/platform_device.h>
#include <asm/mach-ralink/machine.h>
#include <asm/mach-ralink/dev-gpio-buttons.h>
#include <asm/mach-ralink/dev-gpio-leds.h>
#include <asm/mach-ralink/rt305x.h>
#include <asm/mach-ralink/rt305x_regs.h>
#include "devices.h"
#define EDIMAX_GPIO_BUTTON_WPS 12
#define EDIMAX_GPIO_BTN_0 13 /* Wifi on/off switch button */
#define EDIMAX_GPIO_LED_POWER 9
#define EDIMAX_GPIO_LED_WLAN 14
#define EDIMAX_GPIO_LED_3G 7
#define EDIMAX_KEYS_POLL_INTERVAL 20
#define EDIMAX_KEYS_DEBOUNCE_INTERVAL (3 * EDIMAX_KEYS_POLL_INTERVAL)
static struct gpio_led edimax_leds_gpio[] __initdata = {
{
.name = "edimax:green:power",
.gpio = EDIMAX_GPIO_LED_POWER,
.active_low = 1,
}, {
.name = "edimax:amber:wlan",
.gpio = EDIMAX_GPIO_LED_WLAN,
.active_low = 1,
}, {
.name = "edimax:blue:3g",
.gpio = EDIMAX_GPIO_LED_3G,
.active_low = 1,
}
};
static struct gpio_keys_button edimax_gpio_buttons[] __initdata = {
{
.desc = "wps",
.type = EV_KEY,
.code = KEY_WPS_BUTTON,
.debounce_interval = EDIMAX_KEYS_DEBOUNCE_INTERVAL,
.gpio = EDIMAX_GPIO_BUTTON_WPS,
.active_low = 1,
}, {
.desc = "wlanswitch",
.type = EV_KEY,
.code = BTN_0,
.debounce_interval = EDIMAX_KEYS_DEBOUNCE_INTERVAL,
.gpio = EDIMAX_GPIO_BTN_0,
.active_low = 1,
}
};
static void __init edimax_init(void)
{
rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT);
rt305x_register_flash(0);
rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW;
rt305x_register_ethernet();
ramips_register_gpio_leds(-1, ARRAY_SIZE(edimax_leds_gpio),
edimax_leds_gpio);
ramips_register_gpio_buttons(-1, EDIMAX_KEYS_POLL_INTERVAL,
ARRAY_SIZE(edimax_gpio_buttons),
edimax_gpio_buttons);
rt305x_register_wifi();
rt305x_register_wdt();
rt305x_register_usb();
}
MIPS_MACHINE(RAMIPS_MACH_3G_6200N, "3G-6200N", "Edimax 3g-6200n",
edimax_init);

10
target/linux/ramips/image/Makefile
View File

@ -124,6 +124,11 @@ define BuildFirmware/GENERIC_8M/initramfs
$(call BuildFirmware/Generic/initramfs,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(call mkmtd/$(6),$(mtdlayout_8M)))
endef
mtdlayout_edimax_3g6200n=192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,896k(kernel),2752k(rootfs),128k@0x3e0000(cimage)ro,3648k@0x50000(firmware)
define BuildFirmware/3G6200N
$(call BuildFirmware/Generic,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(call mkmtd/$(6),$(mtdlayout_edimax_3g6200n)),917504,2818048)
endef
mtdlayout_argus_atp52b=192k(bootloader)ro,64k(config),64k(factory),1152k(kernel),6656k(rootfs),7808k@0x50000(firmware)
mtd_argus_atp52b_kernel_part_size=1179648
mtd_argus_atp52b_rootfs_part_size=6815744
@ -312,6 +317,10 @@ endif
#
# RT305X Profiles
#
define Image/Build/Profile/3G6200N
$(call Image/Build/Template/$(fs_squash)/$(1),3G6200N,3g-6200n,3G-6200N,ttyS1,57600,phys)
endef
define Image/Build/Profile/ALL0256N
$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,all0256n,ALL0256N,ttyS1,57600,spi)
endef
@ -444,6 +453,7 @@ endef
ifeq ($(CONFIG_RALINK_RT305X),y)
define Image/Build/Profile/Default
$(call Image/Build/Profile/3G6200N,$(1))
$(call Image/Build/Profile/ALL0256N,$(1))
$(call Image/Build/Profile/ARGUS_ATP52B,$(1))
$(call Image/Build/Profile/BC2,$(1))

1
target/linux/ramips/rt305x/config-3.3
View File

@ -87,6 +87,7 @@ CONFIG_RALINK_DEV_GPIO_LEDS=y
CONFIG_RALINK_RT305X=y
# CONFIG_RALINK_RT3883 is not set
CONFIG_RAMIPS_WDT=y
CONFIG_RT305X_MACH_3G_6200N=y
CONFIG_RT305X_MACH_ALL0256N=y
CONFIG_RT305X_MACH_ARGUS_ATP52B=y
CONFIG_RT305X_MACH_BC2=y