ff6417252a
ar71xx: initial support for Mikrotik RB751G-2HnD and RB751U-2HnD
...
Great collaboration on these two fantastic routers on the openwrt forum:
https://forum.openwrt.org/viewtopic.php?id=32320
Above all kudos to aryufan. Well done and thank you everyone else who
contributed.
To-Do: LED for wlan is not yet activated
To-Do: TxPower over 20dBm (RB751U) or 22dBm (RB751G) are not accepted by
the router
Signed-off-by: Hanno Schupp <hanno.schupp@gmail.com>
[juhosg: fix line wrapped patch, fix checkpatch errors, add missing
kernel patches]
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31208 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-06 06:45:07 +00:00
4442cefd05
ar71xx: add rb750 to diag.sh
...
Support status led in diag.sh for RB750
Patch from: Evangelos Arkalis <arkalis.e@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31207 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-06 06:45:04 +00:00
41b5fcad6d
ar71xx: use modules for LED triggers
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31107 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 19:37:59 +00:00
935d0cf7fe
ar71xx: add initial support for RB750GL
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31025 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-19 15:57:04 +00:00
29ab3f288b
ar71xx: use AR8327 on the DB120 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31012 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-18 22:06:58 +00:00
b1fb73bd2f
ar71xx: add support for the jjPlus JA76PF2 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30957 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-16 18:00:34 +00:00
a9e99d72ea
ar71xx: change LED name prefix on the jjplus boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30956 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-16 18:00:26 +00:00
31df1c58cb
ar71xx: switch to kmod-gpio-button-hotplug
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30660 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-20 10:51:48 +00:00
87adb998bc
ar71xx: add model detection for TL-WR842N/ND
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30507 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-13 17:11:57 +00:00
e5e2e517f8
ar71xx: fix db120 board detection
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30408 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-10 11:46:31 +00:00
daf3a5a8ff
ar71xx: add support for the TRENDNet TEW-673GRU board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30376 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-08 16:26:25 +00:00
c7e717ce65
ar71xx: fix ethernet LEDs on the WHR-{G301N,HP-G300N,HP-GN} boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29978 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-31 20:49:34 +00:00
129be88f0d
ar71xx: fix ethernet LEDs on the DIR-600-A1 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29975 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-31 18:37:24 +00:00
4946900ecc
ar71xx: unify LED names on D-Link boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29974 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-31 18:37:15 +00:00
780aecc9ca
ar71xx: support for D-LINK DIR-615 rev. E4
...
This patch adds support for D-LINK DIR-615 E4 board. It's mostly based
on the existing support for DIR-600 A1, with some changes in the leds
configuration.
It's an updated version of the patch that reliably works on my hw for
about a year (it was built from trunk on Jan 2011). When I decided to
update the firmware and checked for the current support for that device,
I also found previously posted patches by Alexey Loukianov that
mentioned some stability issues. I'm not sure where could be the
difference, the patches are very similar except the wmac led pin number
- I was using 1, and those patches used 17.
[juhosg: add 3.2 support]
Signed-off-by: Vadim Girlin <vadimgirlin@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29973 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-31 18:37:09 +00:00
0e45b3367c
ar71xx: add support for TP-Link TL-MR11U
...
Adds support for TL-MR11U, a portable router with very similar
hardware to the TL-WR703N and TL-MR3020, but with an onboard
2000mAh battery.
Tested, working:
All interfaces (Ethernet, 802.11n, USB)
WPS & Reset switches (Power appears to be a hardware slider)
Ethernet, Wifi, 3G LEDs (Power & charging LEDs hardware controlled)
Sysupgrade
[juhosg: fix indentations to use TABs instead of spaces, fix 3.2 patch
breakage]
Signed-off-by: Simon Taylor <simon.taylor.uk@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29972 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-31 18:37:01 +00:00
c003d83f1a
[ar71xx] add support for the Atheros AP113 reference board
...
This reference board is equipped with:
- AR7242 SoC
- AR9580 on-board Wi-Fi
- AR8316 switch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29935 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-28 13:19:49 +00:00
ede9030b02
ar71xx: add support for Compex WPE72/WPE72NX
...
This patch adds support for Compex WPE72 bare board and Compex WPE72NX
Indoor Access Point.
[juhosg: add support to 3.2 as well]
Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29912 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-26 17:01:41 +00:00
e55bf8c335
ar71xx: TL-MR3020: fix board detection, fix missing mandatory package and modify LED behaviour
...
This patch fixes the board detection of the TL-MR3020.
The LED behaviour has also been modified:
* The WPS LED is the diag LED now.
* A netdev trigger for the LAN LED has been added.
The profile of the TL-MR3020 has been updated because the needed package
"kmod-ledtrig-usbdev" was missing which resulted in a non-working usbdev
trigger for the 3G/USB LED.
[juhosg: the board name changes has been removed, and the kernel files
has been changed instead.]
Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29905 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-25 07:44:45 +00:00
0353e85c26
ar71xx: preset WLAN LED config on MZK-W300NH
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29896 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-24 18:40:36 +00:00
8782a469c8
ar71xx: add initial support for the TL-WR2543N/ND board
...
The WLAN LEDs are not working yet.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29680 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-07 19:36:35 +00:00
363361428e
ar71xx: fix sysupgrade on the TL-WR841N/ND v7 boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29672 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-06 15:54:59 +00:00
a128548072
ar71xx: add support for Redwave RW2458N
...
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29669 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-06 07:20:59 +00:00
4052a864ee
ar71xx: fix RB-750 network configuration
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29668 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-06 07:20:54 +00:00
9bcaf204ee
ar71xx: fix LED configuration on the RB-750
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29666 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-05 18:08:28 +00:00
2d696ce97e
ar71xx: add inital support for the ALFA Network AP96 board
...
The microSD slot and the Real Time Clock is not working yet.
The miniPCIe interface is not tested due to the lack of a
suitable card.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29662 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04 21:13:54 +00:00
97682e0944
ar71xx: use the TL-MR3x20 code for the TL-WR841N/ND v7
...
These models are based on the AP99 reference board,
and uses the AR7241 SoC.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29658 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04 17:30:57 +00:00
a53822baf4
ar71xx: show correct model name on TL-WA701N/ND boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29657 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04 17:30:55 +00:00
d18016e1c8
ar71xx: fix network configuration for the TL-WA901N/ND boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29654 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04 17:30:52 +00:00
bf40a234de
ar71xx: allow to use LAN LED on the TL-WA901N/ND boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29653 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04 17:30:50 +00:00
0baf809de3
ar71xx: add default LED configuration for the TL-MR3020
...
Also use the system LED for diagnostic.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29652 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04 17:30:49 +00:00
2526c08008
ar71xx: add support for TP-Link TL-MR3020
...
This patch adds support for the TP-Link device TL-MR3020 which is very
similiar to the TL-WR703N.
The TL-MR3020 uses 5 LEDs, 1 push button and a switch with 3 positions.
Only four LEDs can be controlled via GPIO. The power LED is connected to
the power supply.
The WPS push button has been mapped to KEY_WPS_BUTTON. The two GPIO signals
of the sliding switch have been mapped to BTN_0 and BTN_1.
I have also setup a wiki page with details here:
http://wiki.openwrt.org/toh/tp-link/tl-mr3020
USB is working and has been tested with USB mass storage and USB UMTS
stick.
Wifi also seems to work.
Ethernet is working too.
Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29651 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04 17:30:47 +00:00
674aa34176
ar71xx: add support for the ALFA Network N2/N5 boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29635 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-01 19:30:25 +00:00
859e59397b
ar71xx: define LAN/WAN LEDs for the TL-WR741N/ND boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29631 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-31 15:02:46 +00:00
be7cbae844
ar71xx: fix LEDs on the WRT400N
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29624 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-31 13:54:11 +00:00
8a4dd9c10f
ar71xx: enable sysupgrade support for airrouter
...
Works for me! ;-)
Patch-by: Russell Senior <russell@personaltelco.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29614 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-27 16:59:43 +00:00
22e9d33e1c
ar71xx: fix sysupgrade on PB42/PB44 boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29613 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-27 16:57:01 +00:00
a5fdbc09b3
ar71xx: add default network config for buffalo WZR-HP-G300NH2 and WZR-HP-G450H
...
Thanks netprince for reporting and testing.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29595 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-21 19:32:40 +00:00
b809bbc100
ar71xx: add support for the wzr-hp-g300nh2
...
Signed-off-by: Mark Deneen <mdeneen@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29567 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-18 22:20:17 +00:00
e5d5ffcbc2
ar71xx: connect GMAC0 to the internal switch on DB120
...
Because the external switch has no driver yet, connect GMAC0
to the PHY4 of the internal switch for now. This allows to
use the DB120 board as a router with 4LAN+1WAN ports.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29557 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15 22:25:38 +00:00
1b89ef9b2c
ar71xx: add support for ALFA Network's Hornet-UB board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29535 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-14 20:54:10 +00:00
041a6265f8
ar71xx: Build images for Netgear WNDRMAC and WNDRMACv2
...
The WNDRMAC is a WNDR3700v2 (64MB RAM, 16MB flash) in a white case. The
WNDRMACv2 is a WNDR3800 (128MB RAM, 16MB flash) in a WNDRMAC case.
The WNDRMAC case doesn't have "holes" or labels for the 2.4GHz LED or
switch ports 2-4. The stock firmware uses a single LED (in the 5GHz
position) to indicate the status of both radios, and a single LED (in the
switch port 1 position) to indicate the status of all LAN ports. The
"missing" LEDs are present on the board, and easily shine through the
case. Unlike the stock firmware, OpenWrt will use these "hidden" LEDs.
I've tested the WNDRMACv2 image. I don't have a v1 WNDRMAC, but assume
that this is sufficient to build a fully-functional image.
Signed-off-by: Mark Mentovai <mark@moxienet.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29513 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-13 14:59:40 +00:00
dbdb71ce8b
ar71xx: fix WNDR3x00 model detection
...
Detect the model name for /tmp/sysinfo/model based on 10 bytes at offset
56 in the art (caldata) mtd partition.
r29434 redid WNDR3x00 model detection, attempting to distinguish between
WNDR3700v2 and WNDR3800 by checking MemTotal in /proc/meminfo. However, it
contained a bug: it put the awk inside a $(...), with the result that all
WNDR3700v2 and WNDR3800 models would be reported as WNDR3800. This patch
checks the model name stored in the art partition, as is done by U-Boot
shipping on the WNDR3800. It has the likely advantage of working with
future models based on the WNDR3700 board. It also will not mis-detect
units on which people install more memory.
I have tested this patch on WNDR3700 (v1), WNDR3700v2, and WNDR3800.
Signed-off-by: Mark Mentovai <mark@moxienet.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29472 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-07 06:55:39 +00:00
bdfd4b5e5f
ar71xx: add TP-Link board detection
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29459 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-05 21:11:01 +00:00
e8c0dabf9a
ar71xx: verify hardware id of firmware images on TP-Link boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29455 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-05 18:11:51 +00:00
037fc54211
ar71xx: add preliminary support for wzr-hp-g450h
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29441 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-05 14:20:51 +00:00
a86d2fb99b
ar71xx: rewrite WNDR3700/3800 handling
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29434 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-05 13:03:54 +00:00
40cbea9b54
[ar71xx] add some missing wndr3800 base-files definitions
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29433 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-05 12:56:21 +00:00
65d271e73a
ar71xx: change user-space board detection
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29432 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-05 12:56:20 +00:00
897691c597
ar71xx: add support for Ubiquiti AirRouter
...
Signed-off-by: Gergely Barta <gergely.barta@printerfairkft.hu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29395 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-01 22:49:02 +00:00
64834fd3a6
ar71xx: configure default led behavior for the OM2P
...
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29394 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-01 22:48:59 +00:00
c2898515e9
ar71xx: use /lib/functions/uci-defaults.sh
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29385 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-01 22:48:47 +00:00
dc19d51869
ar71xx: fix wndr3800 machine name
...
This fixes the machine name in /proc/cpuinfo and luci status page machine name.
Signed-off-by: Petri Rosenström <petri.rosenstrom@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29326 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-24 20:09:38 +00:00
ab5f1bf090
ar71xx: add diag support for the DB120 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28975 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-12 10:54:10 +00:00
3e6d0203d3
ar71xx: generate ubootenv from uci-defaults instead of providing defconfig
...
I noticed most of /etc/defconfig was replaced by /etc/uci-defaults, which is
indeed much nicer. So I moved over ubootenv from having a defconfig-entry to
also be generated from uci-defaults.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28971 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-12 10:54:04 +00:00
f324cde661
ar71xx: create TL-WA901ND network config from uci-defaults
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28833 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-07 21:44:24 +00:00
7fa7bf413a
ar71xx: create ALL0258N network config from uci-defaults
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28832 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-07 21:44:23 +00:00
ce845599cf
ar71xx: create NBG{460N,550N,550NH} network config from uci-defaults
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28831 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-07 21:44:20 +00:00
0282878582
ar71xx: create WZR-HP-G300NH network config from uci-defaults
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28830 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-07 21:44:17 +00:00
c5759b1fb1
ar71xx: create RB-493G network config from uci-defaults
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28829 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-07 21:44:12 +00:00
e9214fa4f2
ar71xx: create TL-WR1043ND network config from uci-defaults
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28828 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-07 21:44:11 +00:00
ffab58baa6
ar71xx: create WRT160NL network config from uci-defaults
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28827 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-07 21:44:09 +00:00
0a1c3b4bb1
ar71xx: create PB92 network config from uci-defaults
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28826 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-07 21:44:08 +00:00
bcb5dba8ba
ar71xx: create DIR-825-B1 network config from uci-defaults
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28825 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-07 21:44:07 +00:00
cf735fe893
ar71xx: create TL-WR{841N-v1,941ND} network config from uci-defaults
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28824 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-07 21:44:03 +00:00
71d946496e
ar71xx: create RB-450 network config from uci-defaults
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28823 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-07 21:44:02 +00:00
d72b269a99
ar71xx: create RB-450G, RouterStation Pro network config from uci-defaults
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28822 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-07 21:44:01 +00:00
986666a07d
ar71xx: create RB-433{,U} network config from uci defaults
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28821 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-07 21:43:58 +00:00
3b52c3653c
ar71xx: create even more network configs from the uci-defaults script
...
Create the default network configuration dynamically for the
AR724x/AR9331 boards. Some other boards are using the same
configuration, so convert those as well.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28820 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-07 21:43:56 +00:00
5f5bb28ad3
ar71xx: create more network configs from the uci-defaults script
...
Create the default network configuration dynamically for the boards with
swapped eth0, eth1 interfaces.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28819 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-07 21:43:54 +00:00
2037793081
ar71xx: create a bunch of network configs from the uci-defaults script
...
Create the default network configuration dynamically for the boards with
a single ethernet interface.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28818 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-07 21:43:52 +00:00
23e7014185
ar71xx: create generic network config from an uci-defaults script
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28817 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-07 21:43:51 +00:00
1c203e5ff8
ar71xx: remove AP81 defconfig, it is the same as the generic config
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28816 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-07 21:34:33 +00:00
b949f4133d
ar71xx: enable sysupgrade on the WHR-G301N and WHR-HP-GN boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28812 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-07 20:25:00 +00:00
d2593ad142
ar71xx: wrap long lines in the upgrade script
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28811 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-07 20:24:59 +00:00
1517713d89
ar71xx: add default network configuration for the WHR-HP-GN
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28807 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-07 13:32:43 +00:00
10c12741af
ar71xx: add support for the Buffalo WHR-HP-GN board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28805 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-07 12:59:10 +00:00
affce809d6
ar71xx: add support for the Buffalo WHR-G301N board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28803 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-07 12:59:07 +00:00
18d762e403
ar71xx: add initial support for the TL-WR741ND v4 board
...
The ethernet port LEDs are not working yet.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28706 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-01 11:20:52 +00:00
0ed6243ba7
ar71xx: combine LEDs setup in one file
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28704 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-01 11:20:49 +00:00
2fdf9ce8cb
ar71xx: unify LED names on Planex boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28703 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-01 11:20:47 +00:00
2c27f3365b
ar71xx: unify LED names on Buffalo boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28702 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-01 11:20:46 +00:00
f17abe1ff3
ar71xx: unify LED names on TP-Link boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28701 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-01 11:20:44 +00:00
bb4cf4ec13
ar71xx/all0258n: sysupgrade support
...
U-Boot on the ALL0258N needs offset, size and md5 for kernel and rootfs to be
stored in the U-Boot environment.
If the checksums don't match during boot, a failsafe-system is booted instead.
This patch adds a board-specific sysupgrade hack for the all0258n which
calculates and updates the checksums for the U-Boot environment.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28700 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-01 09:23:32 +00:00
4a1af8218a
ar71xx/all0258n: add default config
...
This adds default network and uboot-env settings for the ALL0258N.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28699 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-01 09:23:31 +00:00
28d91da06e
ar71xx: remove default network config of the mzk-w04nu board as well
...
It works with the generic config.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28695 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-01 09:23:25 +00:00
3ef0b9c188
ar71xx: remove LED setup of nonexistent interfaces on RB750
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28693 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-31 14:26:56 +00:00
7515085565
ar71xx: remove default network config of the wnr2000 board
...
It is the same as the generic configuration.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28692 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-31 14:26:51 +00:00
0cd7c7c114
ar71xx/sysupgrade: use $magic_long instead of $magic when comparing with a 32-bit value
...
Aparently $magic_long was meant here instead of $magic when comparing with
32-bit values.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28678 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-30 13:06:30 +00:00
ddc9918fc1
ar71xx: add initial support for the OpenMesh OM2P board
...
Based on a patch by Marek Lindner <marek@open-mesh.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28617 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-27 07:54:51 +00:00
7344100219
ar71xx: Buffalo WHR-HP-G300N kernel support
...
The initial support for the Buffalo WHR-HP-G300N box.
The code was confirmed to boot and run, but not tested in depth.
Known problem: iw phy phy0 info shows:
Coverage class: 0 (up to 0m)
Available Antennas: TX 0 RX 0
Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28567 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-24 21:49:26 +00:00
5333794b36
ar71xx: add kernel support for the Allnet ALL0258N board
...
This patchs adds support for the Allnet ALL0258N outdoor AP/bridge.
The ALL0258N is based on the AR7240 SoC paired with an AR9285 radio,
it got 8MB of NOR and 32MB SDRAM.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28564 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-24 21:49:21 +00:00
704be5a0f9
[ar71xx] base-files: make sure inittab-console-fixup returns with success ( #10275 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28562 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-24 21:35:43 +00:00
b987bdd364
linux: ar71xx: add support for Mikrotik Routerboard RB493G
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28423 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-11 23:05:16 +00:00
df6ad73e38
ar71xx: enable login only on the system console by default
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28294 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-09-23 19:56:38 +00:00
3e6c09cc01
ar71xx: add support for the TP-Link TL-WR703N v1 board
...
Based on a patch by dongyuqi <729650915@qq.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28277 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-09-21 11:47:53 +00:00
c56fd84056
ar71xx: enable sysupgrade on the AP96 and DB120 boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27901 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-08-04 19:41:18 +00:00
58c241ce9a
ar71xx: use the same test for AP121 and Zcomax sysupgrade images
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27900 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-08-04 19:41:17 +00:00
8ac7c93036
ar71xx: merge WZR-HP-G301NH support into WZR-HP-G300NH
...
Now that we can use a generic name for the switch there is no need for a
separate image for the WZR-HP-G301NH.
Update the default network config and remove the extra image.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27814 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-28 11:57:51 +00:00
17022824c9
ar71xx: add wzr-hp-ag300h sysupgrade support (patch from #9650 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27434 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-04 03:03:34 +00:00
5b13d0ebc8
[ar71xx] revert r27043 ( #9513 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27343 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-01 19:52:57 +00:00
dea51bb2f8
[ar71xx] revert r27341, it introduce wrong behaviour for other models
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27342 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-01 19:15:45 +00:00
08a25a3b26
[ar71xx] turn status LED off if device finished initializing
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27341 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-01 18:39:53 +00:00
42b46dbbd5
ar71xx: add default network config for wzr-hp-ag300h (based on a patch from #9607 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27283 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-25 13:54:42 +00:00
5bc0fb0253
[ar71xx] Remove trailing spaces, convert spaces to tabs
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27153 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-09 19:30:50 +00:00
a7be639630
ar71xx: override inittab to enable login on ttyATH0
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27128 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-07 17:07:10 +00:00
5523ce3deb
ar71xx: add sysupgrade support for the AP121 boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27069 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 22:53:45 +00:00
3714608bb3
ar71xx: add default network config for the AP121 boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27068 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 22:53:44 +00:00
8a367348f9
ar71xx: use the diag LED for diagnostic on the WZR-HP-G30XNH boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27043 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 22:53:13 +00:00
f6cccf1487
ar71xx: fix uci-defaults script for the WZR-HP-G30XNH boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27042 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 22:53:12 +00:00
8dd1a353b7
ar71xx: add uci config for the WLAN LED on the WRT160NL
...
Based on a patch by Magyar Szabolcs <mszabi@freemail.hu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26861 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-08 21:38:49 +00:00
9ebade84cf
ar71xx: use phy0tpt trigger for the WLAN LEDs
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26860 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-08 21:38:48 +00:00
bb19fcc01c
ar71xx: use the ar8316 switch driver on the PB92 board and add a matching default network config
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26779 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-28 21:27:42 +00:00
4665b24467
linux/ar71xx: update wget2nand script
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26747 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-21 12:38:25 +00:00
1fa235abdc
ar71xx: use the gpio_keys_polled driver instead of gpio_buttons
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26603 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-12 09:29:21 +00:00
fa7cdb26c4
ar71xx: Add support for WZR-HP-G301NH
...
Add support for the Buffalo WZR-HP-G301NH. The only difference between it
and the WZR-HP-G00NH is that it has a RTL8366RB instead of a RTL8366S.
Since we don't do runtime detection of the switch, we need a separate
machine definition for it.
While we are at it, also rename the profile to reflect that it now is for
more than one device.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26601 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-12 09:29:10 +00:00
c48dcf9d1f
ar71xx: add default configuration for the switch on AP96
...
Enables forwarding of frames between the switch ports (eth0).
Patch by Jouni Malinen
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26180 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-15 19:51:42 +00:00
84f2d0b280
ar71xx: add support for the TP-Link TL-WA901ND v2 board
...
Patch-by: Jonathan Benett <jbscience87@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26119 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-13 15:08:31 +00:00
1a425b01c1
ar71xx: add support for the WNDR3700v2 board
...
Based on a patch by Mark Mentovai <mark@moxienet.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25118 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-26 20:35:42 +00:00
cb1f0201ee
ar71xx: make uci-default scripts executable
...
Reported-by: Nuno Gonçalves <nunojpg@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24897 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-04 13:44:01 +00:00
45aa025436
[ar71xx] unifi: add sysupgrade and leds support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24737 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-20 17:28:34 +00:00
5c4c0790fe
ar71xx: use usbdev trigger for USB LEDs by default
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24648 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-17 17:10:16 +00:00
091b041480
ar71xx: populate LED configuration for WZR-HP-G300NH
...
Signed-off-by: Dave Lichterman <laviddichterman@gmail.com>
[nand-disk trigger has been removed - juhosg]
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24642 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-17 17:09:57 +00:00
5529e6f9b3
ar71xx: add wlan led for the TL-WR941ND
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24612 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-15 19:55:50 +00:00
c08927d555
ar71xx: add missing files for the JA76PF board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24444 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-10 19:55:28 +00:00
5d0e74a393
ar71xx: add support for the jjPlus JA79PF
...
Patch-by: Cezary Jackiewicz
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24440 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-10 17:57:51 +00:00
11f383a3dc
ar71xx: add support for the TP-LINK TL-MR3220 v1 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24439 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-10 17:57:48 +00:00
5573d7e9b4
ar71xx: add default network configuration file for the TL-MR3420
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24437 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-10 17:57:40 +00:00
b0c01de62d
ar71xx: add nbg460n image generation
...
This adds image generation for NBG460N/550N/550NH boards.
Signed-off-by: Michael Kurz <michi.kurz@googlemail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24419 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-10 15:17:03 +00:00
18cf23720e
[ar71xx] tune rtl8366s default config, make vlan 1 cpu port tagged and use eth0.1 for the lan interface - this brings the configuration more in line with other switch setups
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24215 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-02 20:19:55 +00:00
ab2b65fe3d
ar71xx: Configure WNDR3700 switch LED colors properly ( #8103 )
...
For WNDR3700, use green for 1Gb/s and amber for 100Mb/s and 10Mb/s on
the four LAN port switch LEDs. The LEDs will be lit to indicate a link
and will blink to indicate activity. This matches the stock firmware
and the description printed on the label on the unit's underside.
Signed-off-by: Mark Mentovai <mark@moxienet.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23879 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-04 18:55:16 +00:00
10709def6d
Revert "ar71xx: WNDR3700 WiFi LEDs should blink for activity ( #7984 )" on submitter's request
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23878 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-04 18:53:18 +00:00
fa6072d377
ar71xx: WNDR3700 WiFi LEDs should blink for activity ( #7984 )
...
Make the WiFi LEDs blink for activity on the WNDR3700, matching the
stock firmware and user expectations. The green 2.4GHz and blue 5GHz
LEDs will illuminate with the radio on, and will blink to indicate
transmission and reception.
Signed-off-by: Mark Mentovai <mark@moxienet.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23877 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-04 18:48:22 +00:00
f7bde0d88e
ar71xx: remove dev-ap91-eth.c. switch its only user (RB-750) to the new switch driver
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23439 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-14 13:41:42 +00:00
1a956f1921
ar71xx: use the new ar7240 switch driver on the DIR-600-A1 as well ( fixes #7563 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23432 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-14 00:14:59 +00:00
ccc0817067
ar71xx: initial support for jjPlus JWAP003
...
Patch-by: Cezary Jackiewicz <cezary@eko.one.pl>
(the GPIODEV code has been removed, the sysfs interface
can be used to control the GPIO lines instead - juhosg)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23165 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-01 07:09:29 +00:00
4f50f84bbe
ar71xx: add support for the TL-MR3420 v1 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23136 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-27 14:53:59 +00:00
06d41d3a2d
Add support for Atheros AP96 reference board
...
This is still preliminary and not really tested much. Anyway, this
version seems to be enough to get both wired and wireless
interfaces working. Buttons and leds are also working.
mach-ap96.c is based on mach-wndr3700.c.
Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23125 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-27 08:59:53 +00:00
cf15bf1c2b
ar71xx: add support for the Zcomax ZCN-1523H-2-8/5-16 boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22882 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-03 18:14:37 +00:00
f622088030
ar71xx: add a new driver for the ar7240 switch using swconfig.
...
hooks directly into the ethernet driver, as MAC resets also require switch reinitializations and the switch is part of the cpu core anyway
switch only tl-wr741nd (and other devices using this board file, such as tl-wr841nd) over to using this by default, as other devices are still untested
fixes #7563
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22675 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-08-16 19:21:57 +00:00
ce27ec3f80
ar71xx: add eap7660d board to diag.sh and sysupgrade
...
This patch adds support for the Senao EAP7660D board to diag.sh and sysupgrade.
Signed-off-by: Daniel Golle <daniel.golle@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22644 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-08-14 21:07:31 +00:00
89bd7c0819
linux/ar71xx: add nanostation-m signature (thanks Antonio Anselmi)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22631 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-08-14 07:48:05 +00:00
8f501d19cd
[ar71xx] add uci-defaults script to migrate vlan 0 to vlan 1 after sysupgrade on devices using the RTL8366s switch
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22625 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-08-13 19:29:51 +00:00
1e8591f79b
ar71xx: fix sysupgrade on the ubnt nanostation m
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22370 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-23 18:16:47 +00:00
40134c73fc
ar71xx: add support for the tp-link tl-wa901nd devices (patch by Pieter "Fate" Hollants, from #7528 , without the ethernet fifo cfg values)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22353 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-22 12:37:44 +00:00
0db40a2692
[ar71xx] fix dir-825-b1 default network config after r21905
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22005 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-01 00:03:43 +00:00
22d4293bce
ar71xx: don't use vlan 0 for devices with rtl8366s switch
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21905 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-06-26 19:15:32 +00:00
a069981ab9
ar71xx: add support for the Senao EAP7660D board
...
This patch adds support for the Senao EAP7660D board to trunk.
Signed-off-by: Daniel Golle <daniel.golle@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21837 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-06-18 16:22:05 +00:00
7c36cc3e6e
ar71xx: fix RB750 LED configuration
...
Patch-by: Ray Bellis
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21826 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-06-17 09:24:26 +00:00
ddfd94c0f8
ar71xx: add default network config for the RB433UAH board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21765 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-06-12 13:20:41 +00:00
afb03cb38c
ar71xx: add default network configuration file for the RB450/RB433 boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21730 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-06-08 20:19:23 +00:00
9de82160b1
ar71xx: Added preinit scriptlet to set vars based on cpuinfo during preinit_main. This fixes a bug in which the vars were not set due to /proc not being mounted when ar71xx.sh was sourced
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21634 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-30 03:20:49 +00:00
dae241a475
ar71xx: Make wget2nand fail if copying the kernel fails and use the correct file extension for the rootfs image
...
wget2nand didnt check the exit status after copying the kernel, if the
copying failed for some reason ( for example not enougs space on the
kernel partition) it simply continued extracting the rootfs.
I also changed the filename, which wget2nand trys to download (
.tar.gz instead of .tgz ).
Signed-off-by: Marko Foerster <mrkfoerster@googlemail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21444 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-14 08:38:39 +00:00
da7993d9f8
ar71xx: make the AR8216 driver usable on the TEW-632BRP/DIR-615-Cx boards
...
Cc: backfire@openwrt.org
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20752 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-09 08:40:09 +00:00
fd27f8a1d9
[PATCH 1/2] Add support for the ar8316 switch.
...
This patch enhances the ar8216 driver with ar8316 support and fixes some minor
issues with the ar8216 driver itself. It should not break anything, but isn't
tested on ar8216 devices.
[PATCH 2/2] ar71xx: Add the ar8316 driver to rs pro/rb-450g.
Add the ar8216 driver to the ar71xx target, and add network
configurations for the RouterStation Pro and the RouterBoard RB-450G.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20722 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-05 23:03:16 +00:00
05f3bb99df
ar71xx: add uci defaults to fix trx header on the WRT160NL boards
...
* patch by Otto Solares
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20526 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-27 17:38:40 +00:00
8e17bf613a
ar71xx: Add basic WLAN LED control to TL-WR1043ND
...
* thanks to KillaB
* closes #6834
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20415 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-25 07:31:17 +00:00
aa755504fc
ar71xx: fix defconfig script to work with ImageBuilder
...
* patch from #5722
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20231 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-15 13:29:16 +00:00
9441a246a3
ar71xx: don't break the existing network configuration in the wget2nand script
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20228 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-15 11:03:33 +00:00
51665a4cc1
ar71xx: fix sysupgrade on the LS-SR71 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20119 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-10 17:41:45 +00:00
cc42486e2a
ar71xx: add default network configuration for the PB44 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20099 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-09 18:05:58 +00:00
eba10e101f
ar71xx: add uci-defaults for the RB750 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20097 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-09 18:05:51 +00:00
060132c3b8
ar71xx: override lan port names on the RB750
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20096 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-09 18:05:48 +00:00
9dc09bd52c
ar71xx: improve wget2nand script
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20094 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-09 18:05:42 +00:00
e146a4a5fd
ar71xx: add missing protocol definitions to default network configurations
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20091 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-09 18:05:31 +00:00
7c352366fa
ar71xx: add preliminary support for the RouterBOARD 750
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20029 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-07 05:41:01 +00:00
c472a7b23d
ar71xx: fix sysupgrade on the WRT400N (thanks to chuljin)
...
* closes #6782
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20006 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-05 20:29:27 +00:00
bc539a551e
ar71xx: fix status led detection on the RB4xx boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20005 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-05 20:29:24 +00:00
dbe33d93e0
ar71xx: add default network configuration file for the TL-WR741ND board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19930 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-01 07:34:48 +00:00
dd925e14b4
ar71xx: add default network configuration file for the DIR-600 rev. A1 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19929 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-01 07:34:46 +00:00
116fe7d68c
ar71xx: add default network configuration file for the TL-WR1043ND board
...
Thanks to Andrew Tarabaras.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19840 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-02-24 13:39:20 +00:00
ede32f486d
ar71xx: use the correct name for the status LED on the WRT400 board
...
(thanks to chuljin, patch from #6734 )
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19831 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-02-24 13:38:37 +00:00
5bfe0c97ff
ar71xx: update default network configuration file for the WNDR3700
...
Signed-off-by: Scott Dudley <spmsink@hotmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19830 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-02-24 13:38:31 +00:00
c4bc4eaa02
ar71xx: add uci configuration for the WAN LED on the WNDR3700
...
Based on a patch by Scott Dudley <spmsink@hotmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19746 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-02-19 11:52:25 +00:00
aaddec14d1
preinit: fix mixup between led and reset button enable on some platforms (thx, cshore)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19370 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-28 19:28:02 +00:00
fd4ddfd240
add preinit modularization work by Daniel Dickinson (cshore)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19331 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-25 17:11:17 +00:00
a8e1784a70
rtl8366_smi: move RTL8366S driver into a separate file
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19279 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-22 17:38:07 +00:00
86c99416c7
ar71xx: change failsafe message
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19221 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-18 09:15:35 +00:00
425f18e7db
ar71xx: update default network configuration for the WNDR3700/DIR-825-B1
...
Also drop the default network configuration of the TL-WR1043ND, because
the RTL8366RB switch is not yet supported by the rtl8366-smi driver.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19217 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-18 09:01:47 +00:00
7c8e92210d
ar71xx: add some default configs for rtl8366 based devices
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19210 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-18 00:44:52 +00:00
a518f9c09f
adjust switch default configs for the swconfig api change
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19209 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-18 00:38:08 +00:00
f3fce22b2f
ar71xx: fix typos in the ar71xx.sh
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19151 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-15 12:11:05 +00:00
87f4d9b406
ar71xx: add preliminary support for the Buffalo WZR-HP-G300NH
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19150 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-15 12:08:03 +00:00
c3b4131574
ar71xx: add support for the D-Link DIR-600 rev. A1 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19100 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-11 08:02:10 +00:00
71831618f4
ar71xx: create firmware images for the AP81/PB42/PB44 boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19011 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-02 16:30:52 +00:00
e80ae1b19a
ar71xx: add support for the TL-WR841N v1.5 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18893 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-12-22 19:31:28 +00:00
4b565ddb06
ar71xx: separate DIR-615 rev. C1 support from the TEW-632 (based on the
...
patch from #6186 )
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18818 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-12-18 12:57:01 +00:00
facc79ae17
ar71xx: enable diagnostic LED on the Routerstation Pro
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18782 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-12-15 08:35:11 +00:00
99b375d8e1
[ar71xx] fix default network config after r18699
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18708 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-12-08 22:22:16 +00:00
fec8e48603
ar71xx: make the rtl8306 switch attach to eth0 instead of eth1 on the wrt160nl, fixes wan port detection ( #6309 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18699 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-12-08 14:06:18 +00:00
9828d89496
ar71xx: TL-WR1043ND support cleanup
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18697 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-12-08 12:46:30 +00:00
f5523da72c
ar71xx: DIR-825 support cleanup
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18622 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-12-03 15:07:41 +00:00
2d6e859525
ar71xx: add support for the D-Link DIR-825 rev. B1 board (thanks to
...
ValXdater)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18621 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-12-03 15:07:34 +00:00
050ea33a0b
ar71xx: create sysupgrade image for the WNDR3700
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18570 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-11-28 08:25:56 +00:00
b902f47207
ar71xx: fix a typo in ar71xx.sh
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18568 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-11-28 08:25:49 +00:00
27d58c3312
ar71xx: add default network configuration file for the WNDR3700
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18566 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-11-27 21:21:24 +00:00
ce7b62df3b
ar71xx: add sysupgrade support for Ubiquiti XM boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18533 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-11-25 09:51:31 +00:00
10bd3c525f
ar71xx: enable failsafe on the Nanostation M/Rocket M
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18532 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-11-25 09:51:28 +00:00
7b4990c9ec
ar71xx: create combined images for the RS, RS-PRO and LS-SR71 boards, and add sysupgrade support for them
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18531 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-11-25 09:51:25 +00:00
8816b5283a
ar71xx: register LEDs and buttons on the WNDR3700
...
Thanks to aorlinks (https://forum.openwrt.org/viewtopic.php?pid=97415#p97415 )
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18435 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-11-16 17:31:25 +00:00
f92973072d
ar71xx: add preliminary support for the Netgear WNDR3700
...
Based on patches by Marco Porsch from:
https://forum.openwrt.org/viewtopic.php?id=22311
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18411 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-11-13 17:11:29 +00:00
7d4b5438ac
ar71xx: add default network configuration for RS and RS-Pro
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18103 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-10-20 19:36:47 +00:00
756b08b56a
ar71xx: add default network configuration file for the WP543 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18101 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-10-20 12:59:45 +00:00
51ff204269
add a defconfig for wrt160nl which contains switch settings
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17826 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-10-02 21:07:12 +00:00
96170b8c3e
ar71xx: use 'link4' LED for diagnostic on Bullet M
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17813 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-10-01 19:41:13 +00:00
c2c76e6a5d
ar71xx: add default network configuration for the Bullet M
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17810 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-10-01 19:41:06 +00:00
ebf94b6d3d
ar71xx: use WPS led for diagnostic on WRT160NL
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17518 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-09-05 18:46:43 +00:00
8d35e5e669
[ar71xx] preliminary failsafe support ( closes #5726 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17321 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-08-19 20:16:01 +00:00
1b167d7163
[ar71xx] add diag script ( closes #5725 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17320 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-08-19 19:26:53 +00:00
ee0aa5b99c
[ar71xx] enable sysupgrade on the WRT160Nl
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17202 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-08-09 14:12:24 +00:00
cee5bbbc05
[ar71xx] init mac address on the WRT160NL board (thanks to Gerry Rozema for testing)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17124 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-08-04 17:45:00 +00:00
839df2f4ac
[ar71xx] init mac address on the TEW-632BRP boards ( closes #5403 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17100 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-08-03 07:48:21 +00:00
1884a9821a
[ar71xx] fix sysupgrade
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17092 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-08-02 09:27:38 +00:00
0197992778
[ar71xx] enable sysupgrade support for the TL-WR741ND
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16982 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-07-25 19:50:26 +00:00
635738bee6
[ar71xx] add experimental sysupgrade support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16364 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-06 17:44:49 +00:00
fcaeef0495
[ar71xx] add default network configuration for the AP83 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16360 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-06 16:01:09 +00:00
f7bb74d48d
[ar71xx] improve MZK-W300NH support (thanks to Kazuki Shimada for the board)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16340 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-04 18:18:36 +00:00
e1bc7b5ab1
[ar71xx] add preliminary support for the WRT160NL
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16068 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-05-25 18:36:49 +00:00
f0d3b16a07
[ar71xx] add experimental support for the Atheros PB44 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15928 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-05-20 08:23:48 +00:00
23dc17551c
[ar71xx] add experimental support for the Linksys WRT400N board (thanks to netprince)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15422 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-26 06:40:02 +00:00
6c1f8d5900
[ar71xx] ap81: register ethernet devices, and add default network configuration file
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14921 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-17 18:07:16 +00:00
1c8f194f85
[ar71xx] pb42: fix ethernet, remove USB registration, add default network configuration
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14876 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-14 18:28:33 +00:00
46ee5d1902
[ar71xx] tew-632brp: add default network configuration
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14830 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-10 08:14:26 +00:00
9b2c5cfbbc
[ar71xx] add default network configuration for the RB-411 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14695 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-02-28 18:55:46 +00:00
39d59b6894
[ar71xx] add default network configuration for the AW-NR580
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14688 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-02-27 20:49:51 +00:00
7f8cc4e8cc
[ar71xx] wnr2000: enable ar8216 workaround, add network config. LAN ports now work
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14663 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-02-26 05:54:32 +00:00
a33a62906a
[ar71xx] defconfig: move defaults from /etc/config/defaults/ to /etc/defconfig/, previous location broke uci
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14662 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-02-26 05:54:07 +00:00
bde9cc7cd1
[ar71xx] mzk-w04nu: enable the ar8216 chip workaround, and add a default network configuration file
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14656 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-02-25 16:48:56 +00:00
e65a535b33
[ar71xx] add default network configuration for the TL-WR941ND board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14654 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-02-24 18:19:02 +00:00
23adad85b1
[ar71xx] add more base-files
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14653 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-02-24 18:16:40 +00:00
9bc64003b2
[ar71xx] add wget2nand script
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@12263 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-08-10 09:20:55 +00:00
Gabor Juhos
Felix Fietkau
Florian Fainelli
Jonas Gorski
Jo-Philipp Wich
Vasilis Tsiligiannis
Alexandros C. Couloumbis
Claudio Mignanti
Daniel Dickinson
Andy Boyett