ar71xx: add nbg460n image generation
This adds image generation for NBG460N/550N/550NH boards. Signed-off-by: Michael Kurz <michi.kurz@googlemail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24419 3c298f89-4303-0410-b956-a3cf2f4a3e73master
parent
89cf40ace9
commit
b0c01de62d
|
@ -0,0 +1,26 @@
|
|||
config interface loopback
|
||||
option ifname lo
|
||||
option proto static
|
||||
option ipaddr 127.0.0.1
|
||||
option netmask 255.0.0.0
|
||||
|
||||
config interface lan
|
||||
option ifname eth0
|
||||
option type bridge
|
||||
option proto static
|
||||
option ipaddr 192.168.1.1
|
||||
option netmask 255.255.255.0
|
||||
|
||||
config interface wan
|
||||
option ifname eth1
|
||||
option proto dhcp
|
||||
|
||||
config switch
|
||||
option name rtl8366s
|
||||
option reset 1
|
||||
option enable_vlan 1
|
||||
|
||||
config switch_vlan
|
||||
option device rtl8366s
|
||||
option vlan 0
|
||||
option ports "0 1 2 3 5"
|
|
@ -66,6 +66,9 @@ get_status_led() {
|
|||
mzk-w300nh)
|
||||
status_led="mzk-w300nh:green:status"
|
||||
;;
|
||||
nbg460n_550n_550nh)
|
||||
status_led="nbg460n:green:power"
|
||||
;;
|
||||
pb44)
|
||||
status_led="pb44:amber:jump1"
|
||||
;;
|
||||
|
|
|
@ -0,0 +1,22 @@
|
|||
#!/bin/sh
|
||||
#
|
||||
# Copyright (C) 2010 OpenWrt.org
|
||||
#
|
||||
|
||||
. /lib/ar71xx.sh
|
||||
|
||||
board=$(ar71xx_board_name)
|
||||
|
||||
nbg460n_550n_550nh_set_wlan_led() {
|
||||
uci batch <<EOF
|
||||
set system.wlan_led=led
|
||||
set system.wlan_led.name='WLAN'
|
||||
set system.wlan_led.sysfs='nbg460n:green:wlan'
|
||||
set system.wlan_led.trigger='phy0rx'
|
||||
commit system
|
||||
EOF
|
||||
}
|
||||
|
||||
if [ "${board}" == "nbg460n_550n_550nh" ]; then
|
||||
nbg460n_550n_550nh_set_wlan_led
|
||||
fi
|
|
@ -49,6 +49,9 @@ ar71xx_board_name() {
|
|||
*MZK-W300NH)
|
||||
name="mzk-w300nh"
|
||||
;;
|
||||
*"NBG460N/550N/550NH")
|
||||
name="nbg460n_550n_550nh"
|
||||
;;
|
||||
*PB42)
|
||||
name="pb42"
|
||||
;;
|
||||
|
|
|
@ -68,7 +68,7 @@ platform_check_image() {
|
|||
[ "$ARGC" -gt 1 ] && return 1
|
||||
|
||||
case "$board" in
|
||||
ap81 | ap83 | dir-600-a1 | dir-615-c1 | dir-825-b1 | mzk-w04nu | mzk-w300nh | tew-632brp | wrt400n | bullet-m | nanostation-m | rocket-m | wzr-hp-g300nh )
|
||||
ap81 | ap83 | dir-600-a1 | dir-615-c1 | dir-825-b1 | mzk-w04nu | mzk-w300nh | tew-632brp | wrt400n | bullet-m | nanostation-m | rocket-m | wzr-hp-g300nh | nbg460n_550n_550nh)
|
||||
[ "$magic" != "2705" ] && {
|
||||
echo "Invalid image type."
|
||||
return 1
|
||||
|
|
|
@ -7,7 +7,7 @@
|
|||
|
||||
define Profile/NBG_460N_550N_550NH
|
||||
NAME:=Zyxel NBG 460N/550N/550NH
|
||||
PACKAGES:=kmod-ath9k swconfig
|
||||
PACKAGES:=kmod-ath9k kmod-rtc-pcf8563 swconfig uboot-ar71xx-nbg460n_550n_550nh
|
||||
endef
|
||||
|
||||
define Profile/NBG_460N_550N_550NH/Description
|
||||
|
|
|
@ -373,6 +373,29 @@ define Image/Build/WNDR3700
|
|||
-o $(call imgname,$(1),$(2))-factory.img
|
||||
endef
|
||||
|
||||
define Image/Build/ZyXEL
|
||||
$(call PatchKernelLzma,$(2),$(3))
|
||||
if [ `stat -c%s "$(KDIR)/vmlinux-$(2).bin.lzma"` -gt 917504 ]; then \
|
||||
echo "Warning: $(KDIR)/vmlinux-$(2).bin.lzma is too big"; \
|
||||
else if [ `stat -c%s $(KDIR)/root.$(1)` -gt 2752512 ]; then \
|
||||
echo "Warning: $(KDIR)/root.$(1) is too big"; \
|
||||
else \
|
||||
mkimage -A mips -O linux -T kernel -a 0x80060000 -C lzma -e \
|
||||
0x80060000 \
|
||||
-n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
|
||||
-d $(KDIR)/vmlinux-$(2).bin.lzma $(KDIR)/vmlinux-$(2).uImage; \
|
||||
( \
|
||||
dd if=$(KDIR)/vmlinux-$(2).uImage bs=896k conv=sync; \
|
||||
dd if=$(KDIR)/root.$(1); \
|
||||
) > $(call imgname,$(1),$(2))-sysupgrade.bin; \
|
||||
$(STAGING_DIR_HOST)/bin/mkzynfw \
|
||||
-B $(4) \
|
||||
-b $(BIN_DIR)/$(IMG_PREFIX)-$(2)-u-boot.bin \
|
||||
-r $(call imgname,$(1),$(2))-sysupgrade.bin:0x10000 \
|
||||
-o $(call imgname,$(1),$(2))-factory.bin; \
|
||||
fi; fi
|
||||
endef
|
||||
|
||||
define Image/Build/WNDR3700/initramfs
|
||||
$(call PatchKernelLzma,$(2),$(3) $(wndr3700_mtdlayout))
|
||||
$(call MkImageLzma,$(KDIR)/vmlinux-$(2).bin.lzma,$(KDIR)/vmlinux-$(2).uImage)
|
||||
|
@ -541,6 +564,10 @@ define Image/Build/Profile/MZKW300NH
|
|||
$(call Image/Build/Template/$(fs_64k)/$(1),Planex,mzk-w300nh,board=MZK-W300NH)
|
||||
endef
|
||||
|
||||
define Image/Build/Profile/NBG_460N_550N_550NH
|
||||
$(call Image/Build/Template/$(fs_64k)/$(1),ZyXEL,nbg460n_550n_550nh,board=NBG460N,NBG-460N)
|
||||
endef
|
||||
|
||||
define Image/Build/Profile/TLMR3420V1
|
||||
$(call Image/Build/Template/$(fs_4k)/$(1),TPLINK,tl-mr3420-v1,board=TL-MR3420,TL-MR3420v1)
|
||||
endef
|
||||
|
@ -629,6 +656,7 @@ define Image/Build/Profile/Default
|
|||
$(call Image/Build/Profile/JWAP003,$(1))
|
||||
$(call Image/Build/Profile/MZKW04NU,$(1))
|
||||
$(call Image/Build/Profile/MZKW300NH,$(1))
|
||||
$(call Image/Build/Profile/NBG_460N_550N_550NH,$(1))
|
||||
$(call Image/Build/Profile/PB42,$(1))
|
||||
$(call Image/Build/Profile/PB44,$(1))
|
||||
$(call Image/Build/Profile/PB92,$(1))
|
||||
|
|
Loading…
Reference in New Issue