ar71xx: add support for the tp-link tl-wa901nd devices (patch by Pieter "Fate" Hollants, from #7528, without the ethernet fifo cfg values)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22353 3c298f89-4303-0410-b956-a3cf2f4a3e73master
Felix Fietkau
parent
4ccd3d000f
commit
40134c73fc
|
|
@ -0,0 +1,16 @@
|
|||
config interface loopback
|
||||
option ifname lo
|
||||
option proto static
|
||||
option ipaddr 127.0.0.1
|
||||
option netmask 255.0.0.0
|
||||
|
||||
config interface eth
|
||||
option ifname eth0
|
||||
option proto none
|
||||
|
||||
config interface lan
|
||||
option ifname lan
|
||||
option type bridge
|
||||
option proto static
|
||||
option ipaddr 192.168.1.1
|
||||
option netmask 255.255.255.0
|
||||
|
|
@ -72,6 +72,9 @@ get_status_led() {
|
|||
tew-632brp)
|
||||
status_led="tew-632brp:green:status"
|
||||
;;
|
||||
tl-wa901nd)
|
||||
status_led="tl-wa901nd:green:system"
|
||||
;;
|
||||
tl-wr1043nd)
|
||||
status_led="tl-wr1043nd:green:system"
|
||||
;;
|
||||
|
|
|
|||
|
|
@ -91,6 +91,9 @@ ar71xx_board_name() {
|
|||
*"DIR-615 rev. C1")
|
||||
name="dir-615-c1"
|
||||
;;
|
||||
*TL-WA901ND)
|
||||
name="tl-wa901nd"
|
||||
;;
|
||||
*TL-WR741ND)
|
||||
name="tl-wr741nd"
|
||||
;;
|
||||
|
|
|
|||
|
|
@ -75,7 +75,7 @@ platform_check_image() {
|
|||
}
|
||||
return 0
|
||||
;;
|
||||
tl-wr741nd | tl-wr841n-v1 | tl-wr941nd | tl-wr1043nd)
|
||||
tl-wa901nd | tl-wr741nd | tl-wr841n-v1 | tl-wr941nd | tl-wr1043nd)
|
||||
[ "$magic" != "0100" ] && {
|
||||
echo "Invalid image type."
|
||||
return 1
|
||||
|
|
|
|||
|
|
@ -33,6 +33,7 @@ CONFIG_AR71XX_MACH_PB92=y
|
|||
CONFIG_AR71XX_MACH_RB4XX=y
|
||||
CONFIG_AR71XX_MACH_RB750=y
|
||||
CONFIG_AR71XX_MACH_TEW_632BRP=y
|
||||
CONFIG_AR71XX_MACH_TL_WA901ND=y
|
||||
CONFIG_AR71XX_MACH_TL_WR1043ND=y
|
||||
CONFIG_AR71XX_MACH_TL_WR741ND=y
|
||||
CONFIG_AR71XX_MACH_TL_WR841N_V1=y
|
||||
|
|
|
|||
|
|
@ -33,6 +33,7 @@ CONFIG_AR71XX_MACH_PB92=y
|
|||
CONFIG_AR71XX_MACH_RB4XX=y
|
||||
CONFIG_AR71XX_MACH_RB750=y
|
||||
CONFIG_AR71XX_MACH_TEW_632BRP=y
|
||||
CONFIG_AR71XX_MACH_TL_WA901ND=y
|
||||
CONFIG_AR71XX_MACH_TL_WR1043ND=y
|
||||
CONFIG_AR71XX_MACH_TL_WR741ND=y
|
||||
CONFIG_AR71XX_MACH_TL_WR841N_V1=y
|
||||
|
|
|
|||
|
|
@ -33,6 +33,7 @@ CONFIG_AR71XX_MACH_PB92=y
|
|||
CONFIG_AR71XX_MACH_RB4XX=y
|
||||
CONFIG_AR71XX_MACH_RB750=y
|
||||
CONFIG_AR71XX_MACH_TEW_632BRP=y
|
||||
CONFIG_AR71XX_MACH_TL_WA901ND=y
|
||||
CONFIG_AR71XX_MACH_TL_WR1043ND=y
|
||||
CONFIG_AR71XX_MACH_TL_WR741ND=y
|
||||
CONFIG_AR71XX_MACH_TL_WR841N_V1=y
|
||||
|
|
|
|||
|
|
@ -33,6 +33,7 @@ CONFIG_AR71XX_MACH_PB92=y
|
|||
CONFIG_AR71XX_MACH_RB4XX=y
|
||||
CONFIG_AR71XX_MACH_RB750=y
|
||||
CONFIG_AR71XX_MACH_TEW_632BRP=y
|
||||
CONFIG_AR71XX_MACH_TL_WA901ND=y
|
||||
CONFIG_AR71XX_MACH_TL_WR1043ND=y
|
||||
CONFIG_AR71XX_MACH_TL_WR741ND=y
|
||||
CONFIG_AR71XX_MACH_TL_WR841N_V1=y
|
||||
|
|
|
|||
|
|
@ -167,6 +167,16 @@ config AR71XX_MACH_NBG460N
|
|||
select AR71XX_DEV_GPIO_BUTTONS
|
||||
select AR71XX_DEV_LEDS_GPIO
|
||||
default n
|
||||
|
||||
config AR71XX_MACH_TL_WA901ND
|
||||
bool "TP-LINK TL-WA901ND support"
|
||||
select AR71XX_DEV_M25P80
|
||||
select AR71XX_DEV_AP91_ETH
|
||||
select AR71XX_DEV_AP91_PCI if PCI
|
||||
select AR71XX_DEV_DSA
|
||||
select AR71XX_DEV_GPIO_BUTTONS
|
||||
select AR71XX_DEV_LEDS_GPIO
|
||||
default n
|
||||
|
||||
config AR71XX_MACH_TL_WR741ND
|
||||
bool "TP-LINK TL-WR741ND support"
|
||||
|
|
|
|||
|
|
@ -43,6 +43,7 @@ obj-$(CONFIG_AR71XX_MACH_PB92) += mach-pb92.o
|
|||
obj-$(CONFIG_AR71XX_MACH_RB4XX) += mach-rb4xx.o
|
||||
obj-$(CONFIG_AR71XX_MACH_RB750) += mach-rb750.o
|
||||
obj-$(CONFIG_AR71XX_MACH_TEW_632BRP) += mach-tew-632brp.o
|
||||
obj-$(CONFIG_AR71XX_MACH_TL_WA901ND) += mach-tl-wa901nd.o
|
||||
obj-$(CONFIG_AR71XX_MACH_TL_WR741ND) += mach-tl-wr741nd.o
|
||||
obj-$(CONFIG_AR71XX_MACH_TL_WR841N_V1) += mach-tl-wr841n.o
|
||||
obj-$(CONFIG_AR71XX_MACH_TL_WR941ND) += mach-tl-wr941nd.o
|
||||
|
|
|
|||
|
|
@ -0,0 +1,142 @@
|
|||
/*
|
||||
* TP-LINK TL-WA901ND board support
|
||||
*
|
||||
* Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
|
||||
* Copyright (C) 2010 Pieter Hollants <pieter@hollants.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License version 2 as published
|
||||
* by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#include <linux/mtd/mtd.h>
|
||||
#include <linux/mtd/partitions.h>
|
||||
|
||||
#include <asm/mach-ar71xx/ar71xx.h>
|
||||
|
||||
#include "machtype.h"
|
||||
#include "devices.h"
|
||||
#include "dev-dsa.h"
|
||||
#include "dev-m25p80.h"
|
||||
#include "dev-ap91-pci.h"
|
||||
#include "dev-gpio-buttons.h"
|
||||
#include "dev-leds-gpio.h"
|
||||
|
||||
#define TL_WA901ND_GPIO_LED_QSS 0
|
||||
#define TL_WA901ND_GPIO_LED_SYSTEM 1
|
||||
|
||||
#define TL_WA901ND_GPIO_BTN_RESET 11
|
||||
#define TL_WA901ND_GPIO_BTN_QSS 12
|
||||
|
||||
#define TL_WA901ND_BUTTONS_POLL_INTERVAL 20
|
||||
|
||||
#ifdef CONFIG_MTD_PARTITIONS
|
||||
static struct mtd_partition tl_wa901nd_partitions[] = {
|
||||
{
|
||||
.name = "u-boot",
|
||||
.offset = 0,
|
||||
.size = 0x020000,
|
||||
.mask_flags = MTD_WRITEABLE,
|
||||
} , {
|
||||
.name = "kernel",
|
||||
.offset = 0x020000,
|
||||
.size = 0x140000,
|
||||
} , {
|
||||
.name = "rootfs",
|
||||
.offset = 0x160000,
|
||||
.size = 0x290000,
|
||||
} , {
|
||||
.name = "art",
|
||||
.offset = 0x3f0000,
|
||||
.size = 0x010000,
|
||||
.mask_flags = MTD_WRITEABLE,
|
||||
} , {
|
||||
.name = "firmware",
|
||||
.offset = 0x020000,
|
||||
.size = 0x3d0000,
|
||||
}
|
||||
};
|
||||
#endif /* CONFIG_MTD_PARTITIONS */
|
||||
|
||||
static struct flash_platform_data tl_wa901nd_flash_data = {
|
||||
#ifdef CONFIG_MTD_PARTITIONS
|
||||
.parts = tl_wa901nd_partitions,
|
||||
.nr_parts = ARRAY_SIZE(tl_wa901nd_partitions),
|
||||
#endif
|
||||
};
|
||||
|
||||
static struct gpio_led tl_wa901nd_leds_gpio[] __initdata = {
|
||||
{
|
||||
.name = "tl-wa901nd:green:system",
|
||||
.gpio = TL_WA901ND_GPIO_LED_SYSTEM,
|
||||
.active_low = 1,
|
||||
}, {
|
||||
.name = "tl-wa901nd:green:qss",
|
||||
.gpio = TL_WA901ND_GPIO_LED_QSS,
|
||||
.active_low = 1,
|
||||
}
|
||||
};
|
||||
|
||||
static struct gpio_button tl_wa901nd_gpio_buttons[] __initdata = {
|
||||
{
|
||||
.desc = "reset",
|
||||
.type = EV_KEY,
|
||||
.code = BTN_0,
|
||||
.threshold = 3,
|
||||
.gpio = TL_WA901ND_GPIO_BTN_RESET,
|
||||
.active_low = 1,
|
||||
}, {
|
||||
.desc = "qss",
|
||||
.type = EV_KEY,
|
||||
.code = BTN_1,
|
||||
.threshold = 3,
|
||||
.gpio = TL_WA901ND_GPIO_BTN_QSS,
|
||||
.active_low = 1,
|
||||
}
|
||||
};
|
||||
|
||||
static struct dsa_chip_data tl_wa901nd_v1_dsa_chip = {
|
||||
.port_names[0] = "cpu",
|
||||
.port_names[1] = "lan",
|
||||
};
|
||||
|
||||
static struct dsa_platform_data tl_wa901nd_v1_dsa_data = {
|
||||
.nr_chips = 1,
|
||||
.chip = &tl_wa901nd_v1_dsa_chip,
|
||||
};
|
||||
|
||||
static void __init tl_wa901nd_setup(void)
|
||||
{
|
||||
u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
|
||||
u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
|
||||
|
||||
ar71xx_set_mac_base(mac);
|
||||
|
||||
/*
|
||||
* ar71xx_eth0 would be the WAN port, but is not connected on
|
||||
* the TL-WA901ND. ar71xx_eth1 connects to the internal switch chip,
|
||||
* however we have a single LAN port only.
|
||||
*/
|
||||
ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
|
||||
ar71xx_eth1_data.speed = SPEED_1000;
|
||||
ar71xx_eth1_data.duplex = DUPLEX_FULL;
|
||||
|
||||
ar71xx_add_device_mdio(0x0);
|
||||
ar71xx_add_device_eth(1);
|
||||
|
||||
ar71xx_add_device_dsa(1, &tl_wa901nd_v1_dsa_data);
|
||||
|
||||
ar71xx_add_device_m25p80(&tl_wa901nd_flash_data);
|
||||
|
||||
ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_wa901nd_leds_gpio),
|
||||
tl_wa901nd_leds_gpio);
|
||||
|
||||
ar71xx_add_device_gpio_buttons(-1, TL_WA901ND_BUTTONS_POLL_INTERVAL,
|
||||
ARRAY_SIZE(tl_wa901nd_gpio_buttons),
|
||||
tl_wa901nd_gpio_buttons);
|
||||
|
||||
ap91_pci_init(ee, mac);
|
||||
}
|
||||
|
||||
MIPS_MACHINE(AR71XX_MACH_TL_WA901ND, "TL-WA901ND", "TP-LINK TL-WA901ND",
|
||||
tl_wa901nd_setup);
|
||||
|
|
@ -37,6 +37,7 @@ enum ar71xx_mach_type {
|
|||
AR71XX_MACH_MZK_W300NH, /* Planex MZK-W300NH */
|
||||
AR71XX_MACH_NBG460N, /* Zyxel NBG460N/550N/550NH */
|
||||
AR71XX_MACH_TEW_632BRP, /* TRENDnet TEW-632BRP */
|
||||
AR71XX_MACH_TL_WA901ND, /* TP-LINK TL-WA901ND */
|
||||
AR71XX_MACH_TL_WR741ND, /* TP-LINK TL-WR741ND */
|
||||
AR71XX_MACH_TL_WR841N_V1, /* TP-LINK TL-WR841N v1 */
|
||||
AR71XX_MACH_TL_WR941ND, /* TP-LINK TL-WR941ND */
|
||||
|
|
|
|||
|
|
@ -5,6 +5,17 @@
|
|||
# See /LICENSE for more information.
|
||||
#
|
||||
|
||||
define Profile/TLWA901NDV1
|
||||
NAME:=TP-LINK TL-WA901ND v1
|
||||
PACKAGES:=kmod-ath9k wpad-mini
|
||||
endef
|
||||
|
||||
define Profile/TLWA901NDV1/Description
|
||||
Package set optimized for the TP-LINK TL-WA901ND v1.
|
||||
endef
|
||||
|
||||
$(eval $(call Profile,TLWA901NDV1))
|
||||
|
||||
define Profile/TLWR741NDV1
|
||||
NAME:=TP-LINK TL-WR741ND v1
|
||||
PACKAGES:=kmod-ath9k wpad-mini
|
||||
|
|
|
|||
|
|
@ -517,6 +517,10 @@ define Image/Build/Profile/MZKW300NH
|
|||
$(call Image/Build/Template/$(fs_64k)/$(1),Planex,mzk-w300nh,board=MZK-W300NH)
|
||||
endef
|
||||
|
||||
define Image/Build/Profile/TLWA901NDV1
|
||||
$(call Image/Build/Template/$(fs_4k)/$(1),TPLINK,tl-wa901nd-v1,board=TL-WA901ND,TL-WA901NDv1)
|
||||
endef
|
||||
|
||||
define Image/Build/Profile/TLWR741NDV1
|
||||
$(call Image/Build/Template/$(fs_4k)/$(1),TPLINK,tl-wr741nd-v1,board=TL-WR741ND,TL-WR741NDv1)
|
||||
endef
|
||||
|
|
@ -585,6 +589,7 @@ define Image/Build/Profile/Default
|
|||
$(call Image/Build/Profile/PB92,$(1))
|
||||
$(call Image/Build/Profile/TEW632BRP,$(1))
|
||||
$(call Image/Build/Profile/TEW652BRP,$(1))
|
||||
$(call Image/Build/Profile/TLWA901NDV1,$(1))
|
||||
$(call Image/Build/Profile/TLWR741NDV1,$(1))
|
||||
$(call Image/Build/Profile/TLWR841NV15,$(1))
|
||||
$(call Image/Build/Profile/TLWR841NDV3,$(1))
|
||||
|
|
|
|||
Loading…
Reference in New Issue