Commit Graph

6389 Commits (d8634c45214d6321d6b9a478564454ef295b7d87)

Author SHA1 Message Date
Hauke Mehrtens d5bda1db31 kernel: refresh patches with kernel 2.6.37-rc7
SVN-Revision: 24804
2010-12-22 19:43:25 +00:00
Hauke Mehrtens 4bee3672dd brcm47xx: refresh patches with kernel 2.6.37-rc7
The deleted patches went upstream in 2.6.37-rc7

SVN-Revision: 24803
2010-12-22 19:42:37 +00:00
Hauke Mehrtens 1ccae0efc0 uml: this patch went upstream
SVN-Revision: 24802
2010-12-22 18:20:50 +00:00
Hauke Mehrtens 22d8dcbf44 adm5120: make patches apply again and refresh them
SVN-Revision: 24800
2010-12-22 17:19:36 +00:00
Hauke Mehrtens 72ca63488b kernel: use tab in front of ledtrig-netdev.o and refresh kernel
SVN-Revision: 24798
2010-12-22 17:18:11 +00:00
Hauke Mehrtens 93e09b14eb brcm47xx: wgt634u mac address fix
The Netgear wgt634u uses minus between the hex digest of the mac
address and all other broadcom devices are using colons between the hex
digest. Now the mac address is correctly parsed also when minus is used.

SVN-Revision: 24749
2010-12-21 13:34:09 +00:00
John Crispin 1d6fbd2e85 * fixes duplicate registration of dwc_otg usb core
SVN-Revision: 24738
2010-12-20 17:56:09 +00:00
Claudio Mignanti 2c0596cd69 unifi: add sysupgrade and leds support
SVN-Revision: 24737
2010-12-20 17:28:34 +00:00
Felix Fietkau 0f157c1ad2 mpc85xx: fix up kernel config and make the target boot on the MPC8568E-MDS-PB board
SVN-Revision: 24736
2010-12-20 14:25:25 +00:00
Jo-Philipp Wich 4869f2c5e8 fix layer7 patches for Kernels >= 2.6.35, thanks Daniel Gimpelevich
SVN-Revision: 24728
2010-12-19 16:46:47 +00:00
Felix Fietkau 6acfae9379 ar71xx: enable ar7240 switch support on the UBNT NanoStation M Fixes broadcast frames on the second ethernet MAC
Signed-off-by: Alexander Couzens <lynxis@c-base.org>

SVN-Revision: 24723
2010-12-19 11:56:42 +00:00
Gabor Juhos b512523d6f ar71xx: fix micrel phy patch (Patch from #8041.)
SVN-Revision: 24718
2010-12-19 10:05:55 +00:00
Gabor Juhos 96da72dc56 generic: fix min/max confusion in jffs2_sum_init on 2.6.32
SVN-Revision: 24652
2010-12-17 20:34:26 +00:00
Gabor Juhos cafe08a1b2 ar71xx: remove stray semicolons
SVN-Revision: 24651
2010-12-17 17:57:20 +00:00
Gabor Juhos 01c76bf128 ar71xx: fix WLAN LEDs on the DIR-825 board
SVN-Revision: 24650
2010-12-17 17:10:21 +00:00
Gabor Juhos c1d3a23d19 ar71xx: add helper function to setup ath9k LED/GPIO on the AP94 based boards
SVN-Revision: 24649
2010-12-17 17:10:19 +00:00
Gabor Juhos e7ea6387a3 ar71xx: use usbdev trigger for USB LEDs by default
SVN-Revision: 24648
2010-12-17 17:10:16 +00:00
Gabor Juhos a059a11ee1 generic: add LED trigger for USB device presence/activity
SVN-Revision: 24646
2010-12-17 17:10:11 +00:00
Gabor Juhos 3b8a79395a generic: add usb_find_device_by_name helper
SVN-Revision: 24645
2010-12-17 17:10:08 +00:00
Gabor Juhos 0d01356fc6 generic: nuke 2.6.33 specific stuff, is not used by any platform
SVN-Revision: 24644
2010-12-17 17:10:04 +00:00
Gabor Juhos 8390b7dc9b ar71xx: UBNT Secondary MAC address duplicate fix
There is Secondary MAC address duplicate problem with some UBNT
RouterStation and RouterStation Pro HW batches as Primary MAC addresses
are not increased by 2 per device in board data. Fix is to use 'Locally
Administrated bit' for Secondary MAC address instead of increasing
Primary MAC addresses by 1 which could overlap with other device
Primary MAC address.

Signed-off-by: Kestutis Barkauskas<keba@devint.net>

SVN-Revision: 24643
2010-12-17 17:10:01 +00:00
Gabor Juhos a26c3e60e2 ar71xx: populate LED configuration for WZR-HP-G300NH
Signed-off-by: Dave Lichterman <laviddichterman@gmail.com>

[nand-disk trigger has been removed - juhosg]

SVN-Revision: 24642
2010-12-17 17:09:57 +00:00
Hauke Mehrtens 9daa5485ba brcm47xx: add ssb debug option.
This fixes a problem with wrt350n.
It boots only if this config option is set, otherwise it reboots after "Switching to clocksource MIPS"

Thank you sn9 for fixing this problem.

SVN-Revision: 24626
2010-12-16 19:35:59 +00:00
Hauke Mehrtens 1da5dcbb7a brcm47xx: add some missing pci ID for tg3 driver
Broadcom removed these pci id, but at least the wrt350n has a Ethernet
controller with a pci id of 14e4:1676

Thank you sn9 for fixing this problem.

SVN-Revision: 24625
2010-12-16 19:31:05 +00:00
Hauke Mehrtens c58d8a369c brcm47xx: this patch went upstream
SVN-Revision: 24624
2010-12-16 19:26:55 +00:00
Gabor Juhos a2a5598c00 ar71xx: add wlan led for the TL-WR941ND
SVN-Revision: 24612
2010-12-15 19:55:50 +00:00
Gabor Juhos e421d2575f ar71xx: UBNT M-Series MAC address fix
UBNT M-Series devices have 2 MAC addresses in board data.
Fix is to use both entries from board data instead of one entry.

Signed-off-by: Kestutis Barkauskas<keba@devint.net>

SVN-Revision: 24611
2010-12-15 19:55:47 +00:00
Imre Kaloz 87f73331a4 revert r24604
SVN-Revision: 24605
2010-12-15 12:24:27 +00:00
Alexandros C. Couloumbis 164c97838a target/linux: clean up non generic & obsolete kernel options for 2.6.36, 2.6.37
SVN-Revision: 24604
2010-12-15 12:15:46 +00:00
Gabor Juhos 6c1ace2f28 ar71xx: init the LED pin for ath9k on the TL-MR3[24]20 boards
SVN-Revision: 24569
2010-12-14 18:01:04 +00:00
Gabor Juhos a7750dae90 ar71xx: add helper function to setup LED pin and GPIO on the AP91 based boards
SVN-Revision: 24568
2010-12-14 18:01:00 +00:00
John Crispin 5e3e1d4a02 * make the usb gpio configurable * 105-header_xway.patch has a corrupt line count in it
SVN-Revision: 24564
2010-12-14 13:02:49 +00:00
Gabor Juhos d2fdd1dbe1 ramips: remove 2.6.3[24] support
SVN-Revision: 24562
2010-12-14 08:00:31 +00:00
Gabor Juhos 1403850be1 ramips: switch to 2.6.36
SVN-Revision: 24561
2010-12-14 08:00:29 +00:00
Gabor Juhos f9898e30fb ramips: handle OTG interrupt on the RT305x SoC
SVN-Revision: 24560
2010-12-14 08:00:25 +00:00
Imre Kaloz 1f002efd98 bump kernel version, add MAINTAINER entry
SVN-Revision: 24559
2010-12-14 07:58:24 +00:00
Imre Kaloz d4bf98f231 add plemininary ultrasparc support
SVN-Revision: 24558
2010-12-14 07:57:22 +00:00
Hamish Guthrie 5495be1421 Update package selection
SVN-Revision: 24544
2010-12-13 12:59:22 +00:00
Jo-Philipp Wich 81edc28358 enable mach support for OpenRD Base and OpenRD Client (#8417), spare the rest
SVN-Revision: 24541
2010-12-13 10:06:40 +00:00
Felix Fietkau 5a351509aa base-files: use shutdown instead of stop when the system goes down (patch by tripolar)
SVN-Revision: 24540
2010-12-13 08:01:21 +00:00
John Crispin 9f47e80bb3 adds new lantiq kernel. once the codebase is fully tested and know to be working on all the devices previously supported by ifxmips, we will drop ifxmips support.
SVN-Revision: 24526
2010-12-12 22:57:16 +00:00
Hauke Mehrtens b8ab3d34eb kernel: update kernel versions Update kernel 2.6.32.26 to 2.6.32.27 Update kenrel 2.6.36.1 to 2.6.36.2
SVN-Revision: 24486
2010-12-11 16:07:21 +00:00
Gabor Juhos 9f38f9bf76 ar71xx: add missing files for the JA76PF board
SVN-Revision: 24444
2010-12-10 19:55:28 +00:00
Daniel Dickinson 44e22cbd49 Fixed Comtrend CT536_CT5621 board settings. These boards are based on the 96348GW-11 reference design but have different GPIOs therefore we use the board fixups now availabed (thanks the patches by Jonas Gorski) to create a separate board entry for these boards and leave the reference design with reference GPIOs. Also these boards only have enet1 (no enet0) so we set that in the board definition, and use a defconfig for a single interface network.
SVN-Revision: 24442
2010-12-10 18:59:58 +00:00
Gabor Juhos b680f088ba ar71xx: add support for the jjPlus JA79PF
Patch-by: Cezary Jackiewicz

SVN-Revision: 24440
2010-12-10 17:57:51 +00:00
Gabor Juhos 5b0c83edd9 ar71xx: add support for the TP-LINK TL-MR3220 v1 board
SVN-Revision: 24439
2010-12-10 17:57:48 +00:00
Gabor Juhos 83834da33b ar71xx: add default network configuration file for the TL-MR3420
SVN-Revision: 24437
2010-12-10 17:57:40 +00:00
Felix Fietkau 1fa3e7a941 ar71xx: do not throw compile errors if the nbg460n uboot is not selected
SVN-Revision: 24426
2010-12-10 16:07:27 +00:00
Gabor Juhos d9c68341ef ar71xx: select u-boot for the NBG460N in the Default/Minimal profiles as well
SVN-Revision: 24421
2010-12-10 15:17:08 +00:00
Gabor Juhos 081796fe47 ar71xx: add nbg460n image generation
This adds image generation for NBG460N/550N/550NH boards.

Signed-off-by: Michael Kurz <michi.kurz@googlemail.com>

SVN-Revision: 24419
2010-12-10 15:17:03 +00:00
Alexandros C. Couloumbis ce0984ec5d linux/generic: update & refresh 2.6.36 & 2.6.37. (closes #8324)
SVN-Revision: 24370
2010-12-08 21:20:40 +00:00
Imre Kaloz 502dc1cb39 add optimization to Freescale targets
SVN-Revision: 24341
2010-12-08 11:27:06 +00:00
Gabor Juhos 502d21dc2a ramips: ramips_esw: add more definitions
SVN-Revision: 24340
2010-12-08 10:15:33 +00:00
Gabor Juhos bf58ef7c6d ramips: ramips_esw: add helper function to set pvid
SVN-Revision: 24339
2010-12-08 10:15:28 +00:00
Gabor Juhos 692d379b50 ramips: ramips_esw: add helper function to set vlan members
SVN-Revision: 24338
2010-12-08 10:15:25 +00:00
Gabor Juhos f7c3f91074 ramips: ramips_esw: add helper function to set VLAN id
SVN-Revision: 24337
2010-12-08 10:15:22 +00:00
Gabor Juhos 0d2ad7a816 ramips: ramips_esw: introduce rt305x_esw_rmw{,_raw} function
SVN-Revision: 24336
2010-12-08 10:15:16 +00:00
Gabor Juhos 7b878dde4b ramips: ramips_esw: use rt305x_esw prefix in function names
SVN-Revision: 24335
2010-12-08 10:15:14 +00:00
Gabor Juhos 0fcedc7bda ramips: ramips_esw: coding style cleanup
SVN-Revision: 24334
2010-12-08 10:15:12 +00:00
Gabor Juhos 48e6a31812 ramips: ramips_esw: add defines for switch register offsets
SVN-Revision: 24333
2010-12-08 10:15:07 +00:00
Gabor Juhos 74c13f06df ramips: ramips_esw: don't touch GPIO_PURPOSE register
It must have been set by the board initialization code.

SVN-Revision: 24332
2010-12-08 10:15:04 +00:00
Gabor Juhos 3b9a6adc7d ramips: ramips_esw: convert it to be a platform driver
SVN-Revision: 24331
2010-12-08 10:15:00 +00:00
Gabor Juhos 889729df01 ramips: ramips_esw: move hardware initialization into a separate function
SVN-Revision: 24330
2010-12-08 10:14:58 +00:00
Gabor Juhos 8957f39064 ramips: ramips_esw: use a private structure for the functions
SVN-Revision: 24329
2010-12-08 10:14:54 +00:00
Imre Kaloz f586bb26dd ethernet driver fixup for ppc4xx
SVN-Revision: 24328
2010-12-08 08:59:31 +00:00
Daniel Dickinson 7224337d71 Profiles: GW6X00: Replace ext2 module with ext4 as ext2 and 3 are going away. Remove kmod-loop as the need for it has been superseded by block-extroot, and remove kmod-fs-vfat as it takes space and is rarely needed.
SVN-Revision: 24316
2010-12-08 00:40:31 +00:00
Daniel Dickinson 2a86dcc3d6 Profiles: Make buttons and led modules included by default so that failsafe will work in the case of builds for releases.
SVN-Revision: 24315
2010-12-08 00:40:28 +00:00
Daniel Dickinson c6ef9a0720 Profiles: Move wpad-mini to the profiles that use it, rather than default for all profiles (because -wpad-mini means it's not selectable, which isn't what we always want for the No WiFi profile
SVN-Revision: 24314
2010-12-08 00:40:24 +00:00
Daniel Dickinson 4ab2416621 flash_chips: Added Macronix MX29LV640T Flash Chip support previously mistakenly added to brcm63xx. Thanks blunoise.
SVN-Revision: 24313
2010-12-07 19:45:08 +00:00
Daniel Dickinson f8ed133c0a patches: Renamed 150-led_count to 141-led_count so it comes before the 15-alice_gate2_leds.patch as which led count was mistakenly given the same number.
SVN-Revision: 24310
2010-12-07 17:32:29 +00:00
Daniel Dickinson 0e839ea40d Revert "[brcm63xx] patches-2.6.35: Added flash chip definition for Macronix MX29LV640T."
This reverts commit 43511418ae2771a6662a83a254f06e37f4ac19e5.

It belongs in generic not brcm63xx.

SVN-Revision: 24308
2010-12-07 17:02:31 +00:00
Daniel Dickinson 183d628485 patches-2.6.35: Added flash chip definition for Macronix MX29LV640T. Thanks blunoise
SVN-Revision: 24307
2010-12-07 16:42:23 +00:00
Daniel Dickinson 8f9b14dafe boards: Added GW6x00 fixups and GPIOs. The GW6200 GPIOs are different than the reference design 96348GW so we use fixup to allow us to define the correct ones, also the GW6000 has no GPIO-controlled leds.
SVN-Revision: 24305
2010-12-07 15:15:54 +00:00
Daniel Dickinson 3baa168e09 patches: Refreshed patches after led_count
SVN-Revision: 24304
2010-12-07 15:15:51 +00:00
Daniel Dickinson b963cbde33 board definitions: Added patch for calculating led count, which was part of the patch removed in the previous commit
SVN-Revision: 24303
2010-12-07 15:15:47 +00:00
Daniel Dickinson e5ca4d81f4 Remove patch 140-new_bcm96348gw_leds because it is really the GW6200 leds, not the generic 96348GW. Another commit will add the GW6200 specific boardid and leds. This removal reverts the 96348GW leds to the reference design GPIOs.
SVN-Revision: 24302
2010-12-07 15:15:41 +00:00
Hauke Mehrtens 0fc35b30e3 kernel: fix cryptodev with kernel >= 2.6.35
The fix is from http://sourceforge.net/mailarchive/forum.php?thread_name=20100906035717.GA7562%40mcafee.com&forum_name=ocf-linux-users

Thank you tripolar for reporting the issue and finding a solution for it.

SVN-Revision: 24286
2010-12-06 17:01:10 +00:00
Daniel Dickinson ad24e14b35 base-files: Added the preinit information for reset button and preinit indication led, and preinit interface
SVN-Revision: 24276
2010-12-06 06:46:03 +00:00
Daniel Dickinson 244db5ac6a board definition: Fixed CPVA642 LED definitions
SVN-Revision: 24275
2010-12-06 06:45:57 +00:00
Daniel Dickinson 8316194016 board definitions: Added CPVA642 GPIO leds and buttons and refreshed patches later in series due to fuzz
SVN-Revision: 24274
2010-12-06 04:31:23 +00:00
Daniel Dickinson 7129521696 base-files: Added network defconfig because board only has one ethernet (4-port switch)
SVN-Revision: 24273
2010-12-06 02:01:08 +00:00
Gabor Juhos 0449d92dd7 ramips: add support for 2.6.36
SVN-Revision: 24270
2010-12-05 20:14:38 +00:00
Gabor Juhos 01a5cb48c8 ramips: default profile fix
Fix package names in default profiles.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 24269
2010-12-05 20:14:35 +00:00
Gabor Juhos 47dd3b9fea ramips: use tabs instead of spaces in mach-f5d8235-v2.c
SVN-Revision: 24268
2010-12-05 20:14:30 +00:00
Hauke Mehrtens 2f7964de3e brcm47xx: do not read from CFE
SVN-Revision: 24267
2010-12-05 19:20:26 +00:00
Hauke Mehrtens 852f7b37ed brcm47xx: backport patch from kernel 2.6.37
Backport patches from r24162
  brcm47xx: reorder patches like they were commitet upstream

SVN-Revision: 24266
2010-12-05 19:19:50 +00:00
Hauke Mehrtens 7b1ae48645 brcm47xx: use on common files dir
SVN-Revision: 24264
2010-12-05 18:34:58 +00:00
Imre Kaloz 044ea01f9c preliminary support for Freescale MPC85xx based boards
SVN-Revision: 24259
2010-12-05 11:38:59 +00:00
Felix Fietkau 8067f3f3cc ar71xx: work around a PCI controller bug which causes reads to the PCI_COMMAND register to return bogus values - properly fixes ath9k module reload issues
SVN-Revision: 24236
2010-12-04 01:32:15 +00:00
Imre Kaloz 187359dc67 remove unused kernel versions, make 2.6.36 the default
SVN-Revision: 24223
2010-12-03 09:19:52 +00:00
Hauke Mehrtens 41b3383499 brcm47xx: Add edimax PS1208mfg support
Thank you clemvangelis for the patches. (closes #7672)

SVN-Revision: 24217
2010-12-02 21:27:54 +00:00
Jo-Philipp Wich 6f7e2d4ce8 tune rtl8366s default config, make vlan 1 cpu port tagged and use eth0.1 for the lan interface - this brings the configuration more in line with other switch setups
SVN-Revision: 24215
2010-12-02 20:19:55 +00:00
Gabor Juhos 79c24b2cb0 ar71xx: refresh patches
SVN-Revision: 24210
2010-12-01 18:40:01 +00:00
Gabor Juhos 17564e7db8 generic: yet another missing config symbol for 2.6.37
SVN-Revision: 24208
2010-12-01 18:39:55 +00:00
Jo-Philipp Wich 30b950154b add a new image for the TEW-652BRP which can be used with the bootloader recovery option
SVN-Revision: 24196
2010-11-30 02:04:57 +00:00
Jo-Philipp Wich 2fe5c1d124 backport two changes from kernel.org: 65e9b62d4503849b10bedfc29bff0473760cc597 ipv6: add special mode accept_ra=2 to accept RA while configured as router
c3bccac2fa76f1619dfe4fb7b9bee69de7f066d8
ipv6: add special mode forwarding=2 to send RS while configured as router

SVN-Revision: 24195
2010-11-30 01:52:51 +00:00
Daniel Dickinson 9677b65cb6 image Makefile: Corrected router imagename length limiting. Thanks KanjiMonster for reminding me.
SVN-Revision: 24191
2010-11-28 22:13:00 +00:00
Daniel Dickinson 314bce63e6 bcm63xx: Add support for the T-Com Speedport W 500V.
Add support for the T-Com Speedport W 500V using a special tagged image as it
identifies itself as a 96348GW, but has some gpios wired differently, and also
has only one ethernet port without a switch attached to it.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 24190
2010-11-28 22:04:44 +00:00
Daniel Dickinson 3a49f669f2 bcm63xx: Add board id override fixup.
Add a fixup for the kernel to check the bcm tag of the image for a boardid in
the information1 field, and use that instead of the supplied one by cfe. This
is triggered by a + at the start of the information1 field.

Also modify the image generation to generate apropriately tagged images.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 24189
2010-11-28 22:04:40 +00:00
Daniel Dickinson c51d772e62 bcm63xx: Finalize support for DSL-274xB, rev C2.
The DSL-2740B/DSL-2741B rev C2 support was missing the board definition,
resulting in a kernel panic on boot.
This patch adds it, and also renames the generated image name to properly
reflect that it is for the revision C2, and for both the DSL-2740B and
DSL-2741B.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 24188
2010-11-28 22:04:36 +00:00
Daniel Dickinson 8fa9b24a4c bcm63xx: Allow 'colored' power leds.
Since some devices have more than one power led, they might be separated by
their color in the name. To also allow them to be on after leaving preinit,
set any status led starting with 'power' to on instead of only those with
the exact name of 'power'.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 24187
2010-11-28 22:04:30 +00:00
Daniel Dickinson fec30c8c80 bcm63xx: Don't hardcode the switch ethernet interface in preinit.
Currently eth1 is hardcoded as the expected interface switches in diagmode.
This patch replaces the eth1 with the ifname, and also directly tests if
the interface specified by ifname has a switch attached.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 24186
2010-11-28 22:04:26 +00:00
Daniel Dickinson b1b318750a bcm63xx: Add defconfigs.
Port the mechanism for different default configurations from ar71xx and
use the old configuration as the default configuration. This should have
no functional differences to before.
While we are at it, remove the obsolete nat option.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 24185
2010-11-28 22:04:19 +00:00
Florian Fainelli a133b09b07 refresh patches and remove trailing whitespaces
SVN-Revision: 24181
2010-11-28 18:14:34 +00:00
Florian Fainelli 27189b328e refresh and refine 972-cpmac_multi_probe.patch, patch from sn9
SVN-Revision: 24180
2010-11-28 18:03:56 +00:00
Florian Fainelli 629cc5b101 refresh 973-cpmac_handle_mvswitch.patch
SVN-Revision: 24179
2010-11-28 18:03:48 +00:00
Florian Fainelli a2aa5a227e refresh and refine vlynq patch, patch from sn9
SVN-Revision: 24178
2010-11-28 18:03:42 +00:00
Hauke Mehrtens af2349b4bc brcm47xx: remove support for old kernel versions
SVN-Revision: 24168
2010-11-28 14:08:04 +00:00
Hauke Mehrtens 6f58cc20fc brcm47xx: use kernel 2.6.36.1 as new default kernel for this target.
SVN-Revision: 24167
2010-11-28 14:05:31 +00:00
Hauke Mehrtens 34d53c2be1 kernel: add missing config symbols for 2.6.37-rc3
Thank you maddes for reporting. (closes #8323)

SVN-Revision: 24165
2010-11-28 11:14:25 +00:00
Hauke Mehrtens fb27da9487 brcm47xx: reorder patches like they were commitet upstream
SVN-Revision: 24162
2010-11-27 22:47:11 +00:00
Felix Fietkau b54002aa8e remove CONFIG_ADM6996_PHY=y for ar7 and atheros - this driver is incomplete and should not be used yet
SVN-Revision: 24161
2010-11-27 22:40:26 +00:00
Hauke Mehrtens 256f94dea4 kernel: add missing config option
SVN-Revision: 24157
2010-11-27 16:08:41 +00:00
Florian Fainelli e8881e29b6 patch 972-cpmac_multi_probe.patch correctly, thanks sn9
SVN-Revision: 24142
2010-11-25 12:18:41 +00:00
Florian Fainelli 4b3ffba803 rename 973-cpmac_handle_mvswitch.c to 973-cpmac_handle_mvswitch.patch
SVN-Revision: 24141
2010-11-25 12:18:36 +00:00
Florian Fainelli 80785891e8 handle mvswitch in cpmac, rework MII probing logic, patch from sn9 and Wipster
SVN-Revision: 24140
2010-11-25 11:58:02 +00:00
Florian Fainelli e7ecbdcaa8 handle new revisions of vlynq wrt reset sequence, patch from sn9
SVN-Revision: 24139
2010-11-25 11:57:57 +00:00
Florian Fainelli 6f825a0be3 increase flash window size to 32MiB, patch from sn9.
SVN-Revision: 24138
2010-11-25 11:57:52 +00:00
Imre Kaloz ead8ab8403 update to the latest stable kernels
SVN-Revision: 24136
2010-11-24 18:50:11 +00:00
Daniel Dickinson 195d1d7446 image Makefile: Removed extraneous tab from Image/LimitName16 macro definition. The solves the strange whitespace in front of the image name in the info1 section
SVN-Revision: 24127
2010-11-24 11:06:13 +00:00
Gabor Juhos 21c8d63505 ramips: add support for Belkin F5D8235 v2 board
No support for usb for now.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 24126
2010-11-24 10:01:23 +00:00
Gabor Juhos 90c0618011 generic: add rtl8366rb switch vlan fid support
Allows to use fids 0 to 7. Default is 0.
Those who will use this don't forget to `set vlan fid` every time
after `set vlan ports` if you want non default behavior.
Minor changes. Version bump.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 24125
2010-11-24 10:01:21 +00:00
Gabor Juhos 64b16b9f34 ramips: Use NET_IP_ALIGN instead of hardcoding 2
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>

SVN-Revision: 24124
2010-11-24 10:01:18 +00:00
Gabor Juhos 624cfc5c91 ramips: DMA map the correct RX skb size
The skb_reserve call prior to DMA mapping the RX skb reduced the skb
data len by 2. To not allow DMA to write behind the skb we should pass
the correct skb data len to the device.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>

SVN-Revision: 24123
2010-11-24 10:01:16 +00:00
Gabor Juhos f833e399f2 ramips: Don't trigger BUG_ON due to skb allocation failure
Instead just drop the rx'ed frame silently and reuse the already
available buffer.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>

SVN-Revision: 24122
2010-11-24 10:01:12 +00:00
Gabor Juhos c6e4124855 ramips: Remove unnecessary skb_put
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>

SVN-Revision: 24121
2010-11-24 10:01:08 +00:00
Daniel Dickinson 0c0c1f017f image: Limited image name put into the info1 field to 16 characters and eliminted the OpenWRT revision. This makes using the image (router) name as the board name possible, so that boards with same real boardid but different GPIOs can be detected and the correct GPIOs used.
SVN-Revision: 24118
2010-11-23 20:17:08 +00:00
Alexandros C. Couloumbis 8f94a9a224 linux/brcm47xx: sync yhe BCM4710 fix with the upcoming upstream patch.
SVN-Revision: 24116
2010-11-23 16:41:34 +00:00
Alexandros C. Couloumbis 6a3cc2583b linux/generic: add 2.6.37 support for the Cisco 7941/7945 IP phones: http://lkml.org/lkml/2010/11/21/219 (thank you Kevin Cernekee)
SVN-Revision: 24114
2010-11-23 14:36:15 +00:00
Alexandros C. Couloumbis 16dd69760f linux/brcm47xx: add missing patch on r24112
SVN-Revision: 24113
2010-11-23 14:12:42 +00:00
Alexandros C. Couloumbis 40b5fad48d linux/brcm47xx: Broadcom BCM4710 does not belong in the BMIPS4KC family.
SVN-Revision: 24112
2010-11-23 14:08:41 +00:00
Alexandros C. Couloumbis 60cbd62791 linux/generic: refresh 2.6.37 patches
SVN-Revision: 24111
2010-11-23 14:04:42 +00:00
Hamish Guthrie 4cee84f7d0 Fix ext4 build
SVN-Revision: 24110
2010-11-23 12:07:50 +00:00
Hamish Guthrie 2ebd82b518 Bump kernel version
SVN-Revision: 24109
2010-11-23 11:59:03 +00:00
Hamish Guthrie 73e38425a2 Remove NAND support
SVN-Revision: 24108
2010-11-23 10:16:37 +00:00
Alexandros C. Couloumbis 26df9231fa linux/brcm47xx: properly fix r24096
SVN-Revision: 24102
2010-11-22 18:16:55 +00:00
Alexandros C. Couloumbis aab31771f8 linux/brcm47xx: mainline 2.6.37 602977b0d672687909b0cb0542ede134ed6ef858 commit broke CPU revision: 00024000, MIPS (cc 0x805, rev 0x00, vendor 0x4243) functionality. Revert that patch until we get a proper fix.
SVN-Revision: 24096
2010-11-22 17:17:15 +00:00
Alexandros C. Couloumbis 47d7ed3d09 target/linux: sync kernel patches to 2.6.37-rc3
SVN-Revision: 24095
2010-11-22 16:29:27 +00:00
Imre Kaloz 5ea6194ab0 remove 2.6.25 support
SVN-Revision: 24089
2010-11-22 13:43:32 +00:00
Imre Kaloz d6ea3e24d4 remove 2.6.25 support
SVN-Revision: 24088
2010-11-22 13:31:46 +00:00
Imre Kaloz d066a4c712 2.6.31 support (WiP)
SVN-Revision: 24087
2010-11-22 13:29:58 +00:00
Imre Kaloz 809943774d move x86 back to .32 for now
SVN-Revision: 24085
2010-11-22 12:58:31 +00:00
Imre Kaloz 4052849677 switch from ext2 to ext4 (w/o) journaling
SVN-Revision: 24084
2010-11-22 12:12:39 +00:00
Imre Kaloz 67d797821c use ext4 for ext2/3 on 2.6.32+
SVN-Revision: 24083
2010-11-22 12:11:50 +00:00
Imre Kaloz 06e91a553e add 2.6.32 patches to use ext4 for ext2/3
SVN-Revision: 24082
2010-11-22 12:03:23 +00:00
Imre Kaloz cca7066e73 additional Kconfig options for newer kernels
SVN-Revision: 24081
2010-11-22 11:34:45 +00:00
Imre Kaloz 5406906be1 we don't need microcode updates
SVN-Revision: 24080
2010-11-22 11:33:25 +00:00
Imre Kaloz 7a8be69ce6 add missing Kconfig symbols
SVN-Revision: 24077
2010-11-22 11:03:29 +00:00
Felix Fietkau 9bfd20a160 x86: add missing l1 cache shift change
SVN-Revision: 24072
2010-11-21 23:27:25 +00:00
Felix Fietkau 1a9b885c74 x86: turn off CONFIG_X86_GENERIC for geos and net5501
CONFIG_X86_GENERIC obscures CONFIG_MGEODE_LX, etc. and causes it to use wrong cache-line size.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 24071
2010-11-21 22:56:33 +00:00