brcm47xx: reorder patches like they were commitet upstream

SVN-Revision: 24162
lede-17.01
Hauke Mehrtens 2010-11-27 22:47:11 +00:00
parent b54002aa8e
commit fb27da9487
12 changed files with 380 additions and 139 deletions

View File

@ -0,0 +1,76 @@
From 12b15e5d5914d174e3411d0f0b3fd55dc1b5e55a Mon Sep 17 00:00:00 2001
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Sat, 27 Nov 2010 00:34:02 +0100
Subject: [PATCH 1/6] MIPS: BCM47xx: Do not read config from CFE
The config options read out here are not stored in CFE, but only in
NVRAM on the devices. Remove reading from CFE and only access the NVRAM.
Reading out CFE does not harm, but is useless here.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
---
arch/mips/bcm47xx/setup.c | 28 +++++++++-------------------
1 files changed, 9 insertions(+), 19 deletions(-)
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
@@ -32,7 +32,6 @@
#include <asm/reboot.h>
#include <asm/time.h>
#include <bcm47xx.h>
-#include <asm/fw/cfe/cfe_api.h>
#include <asm/mach-bcm47xx/nvram.h>
struct ssb_bus ssb_bcm47xx;
@@ -82,42 +81,33 @@ static int bcm47xx_get_invariants(struct
/* Fill boardinfo structure */
memset(&(iv->boardinfo), 0 , sizeof(struct ssb_boardinfo));
- if (cfe_getenv("boardvendor", buf, sizeof(buf)) >= 0 ||
- nvram_getenv("boardvendor", buf, sizeof(buf)) >= 0)
+ if (nvram_getenv("boardvendor", buf, sizeof(buf)) >= 0)
iv->boardinfo.type = (u16)simple_strtoul(buf, NULL, 0);
- if (cfe_getenv("boardtype", buf, sizeof(buf)) >= 0 ||
- nvram_getenv("boardtype", buf, sizeof(buf)) >= 0)
+ if (nvram_getenv("boardtype", buf, sizeof(buf)) >= 0)
iv->boardinfo.type = (u16)simple_strtoul(buf, NULL, 0);
- if (cfe_getenv("boardrev", buf, sizeof(buf)) >= 0 ||
- nvram_getenv("boardrev", buf, sizeof(buf)) >= 0)
+ if (nvram_getenv("boardrev", buf, sizeof(buf)) >= 0)
iv->boardinfo.rev = (u16)simple_strtoul(buf, NULL, 0);
/* Fill sprom structure */
memset(&(iv->sprom), 0, sizeof(struct ssb_sprom));
iv->sprom.revision = 3;
- if (cfe_getenv("et0macaddr", buf, sizeof(buf)) >= 0 ||
- nvram_getenv("et0macaddr", buf, sizeof(buf)) >= 0)
+ if (nvram_getenv("et0macaddr", buf, sizeof(buf)) >= 0)
str2eaddr(buf, iv->sprom.et0mac);
- if (cfe_getenv("et1macaddr", buf, sizeof(buf)) >= 0 ||
- nvram_getenv("et1macaddr", buf, sizeof(buf)) >= 0)
+ if (nvram_getenv("et1macaddr", buf, sizeof(buf)) >= 0)
str2eaddr(buf, iv->sprom.et1mac);
- if (cfe_getenv("et0phyaddr", buf, sizeof(buf)) >= 0 ||
- nvram_getenv("et0phyaddr", buf, sizeof(buf)) >= 0)
+ if (nvram_getenv("et0phyaddr", buf, sizeof(buf)) >= 0)
iv->sprom.et0phyaddr = simple_strtoul(buf, NULL, 0);
- if (cfe_getenv("et1phyaddr", buf, sizeof(buf)) >= 0 ||
- nvram_getenv("et1phyaddr", buf, sizeof(buf)) >= 0)
+ if (nvram_getenv("et1phyaddr", buf, sizeof(buf)) >= 0)
iv->sprom.et1phyaddr = simple_strtoul(buf, NULL, 0);
- if (cfe_getenv("et0mdcport", buf, sizeof(buf)) >= 0 ||
- nvram_getenv("et0mdcport", buf, sizeof(buf)) >= 0)
+ if (nvram_getenv("et0mdcport", buf, sizeof(buf)) >= 0)
iv->sprom.et0mdcport = simple_strtoul(buf, NULL, 10);
- if (cfe_getenv("et1mdcport", buf, sizeof(buf)) >= 0 ||
- nvram_getenv("et1mdcport", buf, sizeof(buf)) >= 0)
+ if (nvram_getenv("et1mdcport", buf, sizeof(buf)) >= 0)
iv->sprom.et1mdcport = simple_strtoul(buf, NULL, 10);
return 0;

View File

@ -1,30 +1,27 @@
From e5c5828063a55a752e2392d820383dd7a5da3737 Mon Sep 17 00:00:00 2001
From 4f95d9875b74bbf804a3a83f2c3c5e2068c3f857 Mon Sep 17 00:00:00 2001
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Sun, 18 Jul 2010 13:34:32 +0200
Date: Sat, 27 Nov 2010 00:44:58 +0100
Subject: [PATCH 2/6] MIPS: BCM47xx: Fill values for b43 into ssb sprom
Most of the values are stored in the nvram and not in the CFE. At first
the nvram should be read and if there is no value it should look into
the CFE. Now more values are read out because the b43 and b43legacy
drivers needs them.
Fill the sprom with all available values from the nvram. Most of these
new values are needed for the b43 or b43legacy driver.
Some parts of this patch have been in OpenWRT for a long time and were
made by Michael Buesch.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
---
arch/mips/bcm47xx/setup.c | 131 +++++++++++++++++++++++++++++++++-----------
1 files changed, 98 insertions(+), 33 deletions(-)
arch/mips/bcm47xx/setup.c | 114 ++++++++++++++++++++++++++++++++++++---------
1 files changed, 92 insertions(+), 22 deletions(-)
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
@@ -74,6 +74,95 @@ static void str2eaddr(char *str, char *d
@@ -73,42 +73,112 @@ static void str2eaddr(char *str, char *d
}
}
+#define READ_FROM_NVRAM(_outvar, name, buf) \
+ if (nvram_getenv(name, buf, sizeof(buf)) >= 0 || \
+ cfe_getenv(name, buf, sizeof(buf)) >= 0) \
+ if (nvram_getenv(name, buf, sizeof(buf)) >= 0)\
+ sprom->_outvar = simple_strtoul(buf, NULL, 0);
+
+static void bcm47xx_fill_sprom(struct ssb_sprom *sprom)
@ -36,14 +33,11 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+
+ sprom->revision = 1; /* Fallback: Old hardware does not define this. */
+ READ_FROM_NVRAM(revision, "sromrev", buf);
+ if (nvram_getenv("il0macaddr", buf, sizeof(buf)) >= 0 ||
+ cfe_getenv("il0macaddr", buf, sizeof(buf)) >= 0)
+ if (nvram_getenv("il0macaddr", buf, sizeof(buf)) >= 0)
+ str2eaddr(buf, sprom->il0mac);
+ if (nvram_getenv("et0macaddr", buf, sizeof(buf)) >= 0 ||
+ cfe_getenv("et0macaddr", buf, sizeof(buf)) >= 0)
+ if (nvram_getenv("et0macaddr", buf, sizeof(buf)) >= 0)
+ str2eaddr(buf, sprom->et0mac);
+ if (nvram_getenv("et1macaddr", buf, sizeof(buf)) >= 0 ||
+ cfe_getenv("et1macaddr", buf, sizeof(buf)) >= 0)
+ if (nvram_getenv("et1macaddr", buf, sizeof(buf)) >= 0)
+ str2eaddr(buf, sprom->et1mac);
+ READ_FROM_NVRAM(et0phyaddr, "et0phyaddr", buf);
+ READ_FROM_NVRAM(et1phyaddr, "et1phyaddr", buf);
@ -95,75 +89,64 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+ READ_FROM_NVRAM(ofdm5gpo, "ofdm5gpo", buf);
+ READ_FROM_NVRAM(ofdm5ghpo, "ofdm5ghpo", buf);
+
+ if (nvram_getenv("boardflags", buf, sizeof(buf)) >= 0 ||
+ cfe_getenv("boardflags", buf, sizeof(buf)) >= 0)
+ if (nvram_getenv("boardflags", buf, sizeof(buf)) >= 0) {
+ boardflags = simple_strtoul(buf, NULL, 0);
+ if (boardflags) {
+ sprom->boardflags_lo = (boardflags & 0x0000FFFFU);
+ sprom->boardflags_hi = (boardflags & 0xFFFF0000U) >> 16;
+ if (boardflags) {
+ sprom->boardflags_lo = (boardflags & 0x0000FFFFU);
+ sprom->boardflags_hi = (boardflags & 0xFFFF0000U) >> 16;
+ }
+ }
+ if (nvram_getenv("boardflags2", buf, sizeof(buf)) >= 0 ||
+ cfe_getenv("boardflags2", buf, sizeof(buf)) >= 0)
+ if (nvram_getenv("boardflags2", buf, sizeof(buf)) >= 0) {
+ boardflags = simple_strtoul(buf, NULL, 0);
+ if (boardflags) {
+ sprom->boardflags2_lo = (boardflags & 0x0000FFFFU);
+ sprom->boardflags2_hi = (boardflags & 0xFFFF0000U) >> 16;
+ if (boardflags) {
+ sprom->boardflags2_lo = (boardflags & 0x0000FFFFU);
+ sprom->boardflags2_hi = (boardflags & 0xFFFF0000U) >> 16;
+ }
+ }
+}
+
static int bcm47xx_get_invariants(struct ssb_bus *bus,
struct ssb_init_invariants *iv)
{
@@ -82,43 +171,19 @@ static int bcm47xx_get_invariants(struct
- char buf[100];
+ char buf[20];
/* Fill boardinfo structure */
memset(&(iv->boardinfo), 0 , sizeof(struct ssb_boardinfo));
- if (cfe_getenv("boardvendor", buf, sizeof(buf)) >= 0 ||
- nvram_getenv("boardvendor", buf, sizeof(buf)) >= 0)
+ iv->boardinfo.vendor = SSB_BOARDVENDOR_BCM;
+ if (nvram_getenv("boardtype", buf, sizeof(buf)) >= 0 ||
+ cfe_getenv("boardtype", buf, sizeof(buf)) >= 0)
iv->boardinfo.type = (u16)simple_strtoul(buf, NULL, 0);
- if (cfe_getenv("boardtype", buf, sizeof(buf)) >= 0 ||
- nvram_getenv("boardtype", buf, sizeof(buf)) >= 0)
if (nvram_getenv("boardvendor", buf, sizeof(buf)) >= 0)
- iv->boardinfo.type = (u16)simple_strtoul(buf, NULL, 0);
- if (cfe_getenv("boardrev", buf, sizeof(buf)) >= 0 ||
- nvram_getenv("boardrev", buf, sizeof(buf)) >= 0)
+ if (nvram_getenv("boardrev", buf, sizeof(buf)) >= 0 ||
+ cfe_getenv("boardrev", buf, sizeof(buf)) >= 0)
+ iv->boardinfo.vendor = (u16)simple_strtoul(buf, NULL, 0);
+ else
+ iv->boardinfo.vendor = SSB_BOARDVENDOR_BCM;
if (nvram_getenv("boardtype", buf, sizeof(buf)) >= 0)
iv->boardinfo.type = (u16)simple_strtoul(buf, NULL, 0);
if (nvram_getenv("boardrev", buf, sizeof(buf)) >= 0)
iv->boardinfo.rev = (u16)simple_strtoul(buf, NULL, 0);
- /* Fill sprom structure */
- memset(&(iv->sprom), 0, sizeof(struct ssb_sprom));
- iv->sprom.revision = 3;
-
- if (cfe_getenv("et0macaddr", buf, sizeof(buf)) >= 0 ||
- nvram_getenv("et0macaddr", buf, sizeof(buf)) >= 0)
- if (nvram_getenv("et0macaddr", buf, sizeof(buf)) >= 0)
- str2eaddr(buf, iv->sprom.et0mac);
-
- if (cfe_getenv("et1macaddr", buf, sizeof(buf)) >= 0 ||
- nvram_getenv("et1macaddr", buf, sizeof(buf)) >= 0)
- if (nvram_getenv("et1macaddr", buf, sizeof(buf)) >= 0)
- str2eaddr(buf, iv->sprom.et1mac);
-
- if (cfe_getenv("et0phyaddr", buf, sizeof(buf)) >= 0 ||
- nvram_getenv("et0phyaddr", buf, sizeof(buf)) >= 0)
- if (nvram_getenv("et0phyaddr", buf, sizeof(buf)) >= 0)
- iv->sprom.et0phyaddr = simple_strtoul(buf, NULL, 0);
-
- if (cfe_getenv("et1phyaddr", buf, sizeof(buf)) >= 0 ||
- nvram_getenv("et1phyaddr", buf, sizeof(buf)) >= 0)
- if (nvram_getenv("et1phyaddr", buf, sizeof(buf)) >= 0)
- iv->sprom.et1phyaddr = simple_strtoul(buf, NULL, 0);
-
- if (cfe_getenv("et0mdcport", buf, sizeof(buf)) >= 0 ||
- nvram_getenv("et0mdcport", buf, sizeof(buf)) >= 0)
- if (nvram_getenv("et0mdcport", buf, sizeof(buf)) >= 0)
- iv->sprom.et0mdcport = simple_strtoul(buf, NULL, 10);
-
- if (cfe_getenv("et1mdcport", buf, sizeof(buf)) >= 0 ||
- nvram_getenv("et1mdcport", buf, sizeof(buf)) >= 0)
- iv->sprom.et1mdcport = simple_strtoul(buf, NULL, 10);
+ bcm47xx_fill_sprom(&iv->sprom);
+
+ if (nvram_getenv("cardbus", buf, sizeof(buf)) >= 0 ||
+ cfe_getenv("cardbus", buf, sizeof(buf)) >= 0)
- if (nvram_getenv("et1mdcport", buf, sizeof(buf)) >= 0)
- iv->sprom.et1mdcport = simple_strtoul(buf, NULL, 10);
+ if (nvram_getenv("cardbus", buf, sizeof(buf)) >= 0)
+ iv->has_cardbus_slot = !!simple_strtoul(buf, NULL, 10);
return 0;

View File

@ -0,0 +1,76 @@
From f52926174040418e26112cd0ba36afd8bb066928 Mon Sep 17 00:00:00 2001
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Sat, 27 Nov 2010 14:02:49 +0100
Subject: [PATCH 3/6] MIPS: BCM47xx: Use sscanf for parsing mac address
Instead of writing out own function for parsing the mac address we now
use sscanf.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
---
arch/mips/bcm47xx/setup.c | 23 +++--------------------
arch/mips/include/asm/mach-bcm47xx/nvram.h | 7 +++++++
2 files changed, 10 insertions(+), 20 deletions(-)
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
@@ -56,23 +56,6 @@ static void bcm47xx_machine_halt(void)
cpu_relax();
}
-static void str2eaddr(char *str, char *dest)
-{
- int i = 0;
-
- if (str == NULL) {
- memset(dest, 0, 6);
- return;
- }
-
- for (;;) {
- dest[i++] = (char) simple_strtoul(str, NULL, 16);
- str += 2;
- if (!*str++ || i == 6)
- break;
- }
-}
-
#define READ_FROM_NVRAM(_outvar, name, buf) \
if (nvram_getenv(name, buf, sizeof(buf)) >= 0)\
sprom->_outvar = simple_strtoul(buf, NULL, 0);
@@ -87,11 +70,11 @@ static void bcm47xx_fill_sprom(struct ss
sprom->revision = 1; /* Fallback: Old hardware does not define this. */
READ_FROM_NVRAM(revision, "sromrev", buf);
if (nvram_getenv("il0macaddr", buf, sizeof(buf)) >= 0)
- str2eaddr(buf, sprom->il0mac);
+ nvram_parse_macaddr(buf, sprom->il0mac);
if (nvram_getenv("et0macaddr", buf, sizeof(buf)) >= 0)
- str2eaddr(buf, sprom->et0mac);
+ nvram_parse_macaddr(buf, sprom->et0mac);
if (nvram_getenv("et1macaddr", buf, sizeof(buf)) >= 0)
- str2eaddr(buf, sprom->et1mac);
+ nvram_parse_macaddr(buf, sprom->et1mac);
READ_FROM_NVRAM(et0phyaddr, "et0phyaddr", buf);
READ_FROM_NVRAM(et1phyaddr, "et1phyaddr", buf);
READ_FROM_NVRAM(et0mdcport, "et0mdcport", buf);
--- a/arch/mips/include/asm/mach-bcm47xx/nvram.h
+++ b/arch/mips/include/asm/mach-bcm47xx/nvram.h
@@ -12,6 +12,7 @@
#define __NVRAM_H
#include <linux/types.h>
+#include <linux/kernel.h>
struct nvram_header {
u32 magic;
@@ -36,4 +37,10 @@ struct nvram_header {
extern int nvram_getenv(char *name, char *val, size_t val_len);
+static inline void nvram_parse_macaddr(char *buf, u8 *macaddr)
+{
+ sscanf(buf, "%hhx:%hhx:%hhx:%hhx:%hhx:%hhx", &macaddr[0], &macaddr[1],
+ &macaddr[2], &macaddr[3], &macaddr[4], &macaddr[5]);
+}
+
#endif

View File

@ -0,0 +1,45 @@
From 25abc0cde3f4865910b380d68ffda0916b5870e7 Mon Sep 17 00:00:00 2001
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Sat, 27 Nov 2010 12:25:21 +0100
Subject: [PATCH 4/6] MIPS: BCM47xx: Swap serial console if ttyS1 was specified.
Some devices like the Netgear WGT634U are using ttyS1 for default
console output. We should switch to that console if it was given in
the kernel_args parameters.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
---
arch/mips/bcm47xx/setup.c | 16 ++++++++++++++++
1 files changed, 16 insertions(+), 0 deletions(-)
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
@@ -169,12 +169,28 @@ static int bcm47xx_get_invariants(struct
void __init plat_mem_setup(void)
{
int err;
+ char buf[100];
+ struct ssb_mipscore *mcore;
err = ssb_bus_ssbbus_register(&ssb_bcm47xx, SSB_ENUM_BASE,
bcm47xx_get_invariants);
if (err)
panic("Failed to initialize SSB bus (err %d)\n", err);
+ mcore = &ssb_bcm47xx.mipscore;
+ if (nvram_getenv("kernel_args", buf, sizeof(buf)) >= 0) {
+ if (strstr(buf, "console=ttyS1")) {
+ struct ssb_serial_port port;
+
+ printk(KERN_DEBUG "Swapping serial ports!\n");
+ /* swap serial ports */
+ memcpy(&port, &mcore->serial_ports[0], sizeof(port));
+ memcpy(&mcore->serial_ports[0], &mcore->serial_ports[1],
+ sizeof(port));
+ memcpy(&mcore->serial_ports[1], &port, sizeof(port));
+ }
+ }
+
_machine_restart = bcm47xx_machine_restart;
_machine_halt = bcm47xx_machine_halt;
pm_power_off = bcm47xx_machine_halt;

View File

@ -24,35 +24,19 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
#include <asm/bootinfo.h>
#include <asm/reboot.h>
#include <asm/time.h>
@@ -190,12 +192,47 @@ static int bcm47xx_get_invariants(struct
@@ -168,7 +170,7 @@ static int bcm47xx_get_invariants(struct
void __init plat_mem_setup(void)
{
- int err;
+ int i, err;
+ char buf[100];
+ struct ssb_mipscore *mcore;
char buf[100];
struct ssb_mipscore *mcore;
@@ -191,6 +193,24 @@ void __init plat_mem_setup(void)
}
}
err = ssb_bus_ssbbus_register(&ssb_bcm47xx, SSB_ENUM_BASE,
bcm47xx_get_invariants);
if (err)
panic("Failed to initialize SSB bus (err %d)\n", err);
+ mcore = &ssb_bcm47xx.mipscore;
+
+ if (nvram_getenv("kernel_args", buf, sizeof(buf)) >= 0 ||
+ cfe_getenv("kernel_args", buf, sizeof(buf)) >= 0) {
+ if (strstr(buf, "console=ttyS1")) {
+ struct ssb_serial_port port;
+
+ printk(KERN_DEBUG "Swapping serial ports!\n");
+ /* swap serial ports */
+ memcpy(&port, &mcore->serial_ports[0], sizeof(port));
+ memcpy(&mcore->serial_ports[0], &mcore->serial_ports[1],
+ sizeof(port));
+ memcpy(&mcore->serial_ports[1], &port, sizeof(port));
+ }
+ }
+
+ for (i = 0; i < mcore->nr_serial_ports; i++) {
+ struct ssb_serial_port *port = &(mcore->serial_ports[i]);
+ struct uart_port s;
@ -70,6 +54,7 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+ early_serial_setup(&s);
+ }
+ printk(KERN_DEBUG "Serial init done.\n");
+
_machine_restart = bcm47xx_machine_restart;
_machine_halt = bcm47xx_machine_halt;
pm_power_off = bcm47xx_machine_halt;

View File

@ -0,0 +1,50 @@
From 93f94103b9d239b15bba69f592bb6fb2ec5e363f Mon Sep 17 00:00:00 2001
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Sat, 27 Nov 2010 13:14:14 +0100
Subject: [PATCH 5/6] b44: fix workarround for wap54g10
The code for the b44_wap54g10_workaround was never included, because
the config option was wrong. The nvram_get function was never in
mainline kernel, only in external OpenWrt patches.
The code should be compiled in when CONFIG_BCM47XX is selected and not
when CONFIG_SSB_DRIVER_MIPS is selected, because nvram_getenv is only
available on bcm47xx platforms and now in the mainline kernel code.
Using an include is better than a second function declaration, to fix
this when the function signature changes.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
---
drivers/net/b44.c | 11 +++++------
1 files changed, 5 insertions(+), 6 deletions(-)
--- a/drivers/net/b44.c
+++ b/drivers/net/b44.c
@@ -381,11 +381,11 @@ static void b44_set_flow_ctrl(struct b44
__b44_set_flow_ctrl(bp, pause_enab);
}
-#ifdef SSB_DRIVER_MIPS
-extern char *nvram_get(char *name);
+#ifdef CONFIG_BCM47XX
+#include <asm/mach-bcm47xx/nvram.h>
static void b44_wap54g10_workaround(struct b44 *bp)
{
- const char *str;
+ char buf[20];
u32 val;
int err;
@@ -394,10 +394,9 @@ static void b44_wap54g10_workaround(stru
* see https://dev.openwrt.org/ticket/146
* check and reset bit "isolate"
*/
- str = nvram_get("boardnum");
- if (!str)
+ if (nvram_getenv("boardnum", buf, sizeof(buf)) < 0)
return;
- if (simple_strtoul(str, NULL, 0) == 2) {
+ if (simple_strtoul(buf, NULL, 0) == 2) {
err = __b44_readphy(bp, 0, MII_BMCR, &val);
if (err)
goto error;

View File

@ -0,0 +1,51 @@
From 99dfec6e793651963ede3c2721b9ff3c81e3aeac Mon Sep 17 00:00:00 2001
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Sat, 27 Nov 2010 14:04:36 +0100
Subject: [PATCH 6/6] sb: fix nvram_get on bcm47xx platform
The nvram_get function was never in the mainline kernel, it only
existed in an external OpenWrt patch. Use nvram_getenv function, which
is in mainline and use an include instead of an extra function
declaration.
et0macaddr contains the mac address in text from like
00:11:22:33:44:55. We have to parse it before adding it into macaddr.
nvram_parse_macaddr will be merged into asm/mach-bcm47xx/nvram.h though
the MIPS git tree and will be available soon. It will not build now
without nvram_parse_macaddr, but it haven't done before.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
---
include/linux/ssb/ssb_driver_gige.h | 17 +++++++++++------
1 files changed, 11 insertions(+), 6 deletions(-)
--- a/include/linux/ssb/ssb_driver_gige.h
+++ b/include/linux/ssb/ssb_driver_gige.h
@@ -96,16 +96,21 @@ static inline bool ssb_gige_must_flush_p
return 0;
}
-extern char * nvram_get(const char *name);
+#ifdef CONFIG_BCM47XX
+#include <asm/mach-bcm47xx/nvram.h>
/* Get the device MAC address */
static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
{
-#ifdef CONFIG_BCM47XX
- char *res = nvram_get("et0macaddr");
- if (res)
- memcpy(macaddr, res, 6);
-#endif
+ char buf[20];
+ if (nvram_getenv("et0macaddr", buf, sizeof(buf)) < 0)
+ return;
+ nvram_parse_macaddr(buf, macaddr);
}
+#else
+static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
+{
+}
+#endif
extern int ssb_gige_pcibios_plat_dev_init(struct ssb_device *sdev,
struct pci_dev *pdev);

View File

@ -1,35 +1,6 @@
--- a/drivers/net/b44.c
+++ b/drivers/net/b44.c
@@ -381,11 +381,12 @@ static void b44_set_flow_ctrl(struct b44
__b44_set_flow_ctrl(bp, pause_enab);
}
-#ifdef SSB_DRIVER_MIPS
-extern char *nvram_get(char *name);
+#ifdef CONFIG_BCM47XX
+
+#include <asm/mach-bcm47xx/nvram.h>
static void b44_wap54g10_workaround(struct b44 *bp)
{
- const char *str;
+ char buf[20];
u32 val;
int err;
@@ -394,10 +395,9 @@ static void b44_wap54g10_workaround(stru
* see https://dev.openwrt.org/ticket/146
* check and reset bit "isolate"
*/
- str = nvram_get("boardnum");
- if (!str)
+ if (nvram_getenv("boardnum", buf, sizeof(buf)) > 0)
return;
- if (simple_strtoul(str, NULL, 0) == 2) {
+ if (simple_strtoul(buf, NULL, 0) == 2) {
err = __b44_readphy(bp, 0, MII_BMCR, &val);
if (err)
goto error;
@@ -412,10 +412,43 @@ static void b44_wap54g10_workaround(stru
@@ -411,10 +411,41 @@ static void b44_wap54g10_workaround(stru
error:
pr_warning("PHY: cannot reset MII transceiver isolate bit\n");
}
@ -60,9 +31,7 @@
+ }
+ return;
+}
+
#else
+
static inline void b44_wap54g10_workaround(struct b44 *bp)
{
}
@ -73,7 +42,7 @@
#endif
static int b44_setup_phy(struct b44 *bp)
@@ -424,6 +457,7 @@ static int b44_setup_phy(struct b44 *bp)
@@ -423,6 +454,7 @@ static int b44_setup_phy(struct b44 *bp)
int err;
b44_wap54g10_workaround(bp);
@ -81,7 +50,7 @@
if (bp->phy_addr == B44_PHY_ADDR_NO_PHY)
return 0;
@@ -2089,6 +2123,8 @@ static int __devinit b44_get_invariants(
@@ -2088,6 +2120,8 @@ static int __devinit b44_get_invariants(
* valid PHY address. */
bp->phy_addr &= 0x1F;

View File

@ -33,7 +33,7 @@
+EXPORT_SYMBOL(nvram_get);
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
@@ -238,3 +238,20 @@ void __init plat_mem_setup(void)
@@ -215,3 +215,20 @@ void __init plat_mem_setup(void)
_machine_halt = bcm47xx_machine_halt;
pm_power_off = bcm47xx_machine_halt;
}

View File

@ -34,7 +34,7 @@
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -712,6 +712,9 @@ build_get_pgde32(u32 **p, unsigned int t
@@ -711,6 +711,9 @@ build_get_pgde32(u32 **p, unsigned int t
#endif
uasm_i_addu(p, ptr, tmp, ptr);
#else
@ -44,7 +44,7 @@
UASM_i_LA_mostly(p, ptr, pgdc);
#endif
uasm_i_mfc0(p, tmp, C0_BADVADDR); /* get faulting address */
@@ -873,12 +876,12 @@ static void __cpuinit build_r4000_tlb_re
@@ -872,12 +875,12 @@ static void __cpuinit build_r4000_tlb_re
/* No need for uasm_i_nop */
}
@ -60,7 +60,7 @@
build_get_pgde32(&p, K0, K1); /* get pgd in K1 */
#endif
@@ -890,6 +893,9 @@ static void __cpuinit build_r4000_tlb_re
@@ -889,6 +892,9 @@ static void __cpuinit build_r4000_tlb_re
build_update_entries(&p, K0, K1);
build_tlb_write_entry(&p, &l, &r, tlb_random);
uasm_l_leave(&l, p);
@ -70,7 +70,7 @@
uasm_i_eret(&p); /* return from trap */
#ifdef CONFIG_HUGETLB_PAGE
@@ -1326,12 +1332,12 @@ build_r4000_tlbchange_handler_head(u32 *
@@ -1325,12 +1331,12 @@ build_r4000_tlbchange_handler_head(u32 *
struct uasm_reloc **r, unsigned int pte,
unsigned int ptr)
{
@ -86,7 +86,7 @@
build_get_pgde32(p, pte, ptr); /* get pgd in ptr */
#endif
@@ -1368,6 +1374,9 @@ build_r4000_tlbchange_handler_tail(u32 *
@@ -1367,6 +1373,9 @@ build_r4000_tlbchange_handler_tail(u32 *
build_update_entries(p, tmp, ptr);
build_tlb_write_entry(p, l, r, tlb_indexed);
uasm_l_leave(l, *p);

View File

@ -1,11 +0,0 @@
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
@@ -84,7 +84,7 @@ static void str2eaddr(char *str, char *d
static void bcm47xx_fill_sprom(struct ssb_sprom *sprom)
{
char buf[100];
- u32 boardflags;
+ u32 uninitialized_var(boardflags);
memset(sprom, 0, sizeof(struct ssb_sprom));

View File

@ -1,14 +1,30 @@
From 3cfa0a9d4b4cc30ec735c5c9535ff493bae24d08 Mon Sep 17 00:00:00 2001
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Sat, 27 Nov 2010 18:14:23 +0100
Subject: [PATCH] ssb: Add sysfs attributes to ssb devices
Make it possible to read out the attributes, till now only show on
dmesg, through sysfs.
This patch was some time in OpenWrt.
Signed-off-by: Bernhard Loos <bernhardloos@googlemail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
---
drivers/ssb/main.c | 30 ++++++++++++++++++++++++++++++
1 files changed, 30 insertions(+), 0 deletions(-)
--- a/drivers/ssb/main.c
+++ b/drivers/ssb/main.c
@@ -383,6 +383,34 @@ static int ssb_device_uevent(struct devi
@@ -383,6 +383,35 @@ static int ssb_device_uevent(struct devi
ssb_dev->id.revision);
}
+#define ssb_config_attr(attrib, field, format_string) \
+static ssize_t \
+#define ssb_config_attr(attrib, field, format_string) \
+static ssize_t \
+attrib##_show(struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+ return sprintf(buf, format_string, dev_to_ssb_dev(dev)->field); \
+{ \
+ return sprintf(buf, format_string, dev_to_ssb_dev(dev)->field); \
+}
+
+ssb_config_attr(core_num, core_index, "%u\n")
@ -19,7 +35,8 @@
+static ssize_t
+name_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%s\n", ssb_core_name(dev_to_ssb_dev(dev)->id.coreid));
+ return sprintf(buf, "%s\n",
+ ssb_core_name(dev_to_ssb_dev(dev)->id.coreid));
+}
+
+static struct device_attribute ssb_device_attrs[] = {
@ -35,7 +52,7 @@
static struct bus_type ssb_bustype = {
.name = "ssb",
.match = ssb_bus_match,
@@ -392,6 +420,7 @@ static struct bus_type ssb_bustype = {
@@ -392,6 +421,7 @@ static struct bus_type ssb_bustype = {
.suspend = ssb_device_suspend,
.resume = ssb_device_resume,
.uevent = ssb_device_uevent,