e219c3ac3a
enable OHCI/EHCI glue on Rt305x, so it is available for Rt3352F.
...
Hope that this works, didn't have a chance to actually test it...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 32815
2012-07-24 20:38:08 +00:00
a65eee9ac3
add image build for ALL5002
...
add image build for ALL5002
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 32814
2012-07-24 20:38:03 +00:00
0a08a776fb
add support for Allnet ALL5002 to kernel
...
support ALL5002 in ramips/rt305x branch of the kernel.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 32813
2012-07-24 20:37:56 +00:00
6641024f50
uart_clk on Rt3352F is always 40MHz
...
Currently, sys_clk/10 is used which is just wrong.
cpu_clk/10 would work for systems with 400MHz CPU clock.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 32812
2012-07-24 20:37:50 +00:00
372945185d
ramips: rt305x: add support for Edimax 3G-6200N
...
Support for Edimax 3G-6200N router with USB.
Signed-off-by: Lukasz Golebiowski <lgolebio@gmail.com>
SVN-Revision: 32682
2012-07-12 13:29:46 +00:00
eee358338c
ramips: mac address detection for Fonera 2.0n
...
Detect and apply MAC address of a Fonera 2.0n (ramips)
Signed-off-by: Malte Forkel <malte.forkel@berlin.de>
Signed-off-by: Vasilis Tsiligiannis <b_tsiligiannis@silverton.gr>
SVN-Revision: 32490
2012-06-23 13:58:29 +00:00
833b4af816
ramips: rt305x: add support for the Petatel PSR-680W Wireless CDMA Router
...
This patch adds support for the Korean made Petatel PSR-680W Wireless CDMA Router.
The platform is based on Ralink RT3052.
http://wiki.openwrt.org/toh/petatel/psr-680w
Signed-off-by: Dmitry Shmygov <shmygov at rambler.ru>
SVN-Revision: 32450
2012-06-19 09:52:15 +00:00
a4d96aae8d
bump to 3.3.8
...
SVN-Revision: 32055
2012-06-05 06:57:51 +00:00
ffbb4f88a9
ramips: use the generic uci-default functions for initial LED setup
...
SVN-Revision: 31993
2012-05-29 16:39:18 +00:00
c71838faa1
ramips: WAN LED for D-Link DIR-300-B1
...
Add led devices for D-Link DIR-300-B1 WAN LED.
Note that the GPIO state is also ANDed with the esw switch port 4
LED state, which is why I've set the amber LED to default-on.
Closes: https://dev.openwrt.org/ticket/11326
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
[ juhosg:
- fix comment style in mach-dir-300-revb.c,
- remove the PPP specific LED setup, not everyone uses a PPP connection
on the WAN interface]
SVN-Revision: 31989
2012-05-29 16:39:03 +00:00
1c552ba8e5
ramips: rt3883: add device registration code for the SPI controller
...
SVN-Revision: 31922
2012-05-27 17:10:00 +00:00
9c241983fc
ramips: allow to use the SPI driver on RT3662/RT3883
...
SVN-Revision: 31921
2012-05-27 17:09:58 +00:00
78a750dcce
ramips: rt3883: fix GPIO reservation for the SPI pins
...
SVN-Revision: 31920
2012-05-27 17:09:56 +00:00
0622fdd82c
ramips: rt305x: remove superfluous controller_data assignment
...
SVN-Revision: 31919
2012-05-27 17:09:52 +00:00
7f5bec0642
ramips: make rt2x00 firmware extraction quiet
...
SVN-Revision: 31918
2012-05-27 17:09:50 +00:00
2ae5581447
kernel: update linux 3.3 to 3.3.7
...
SVN-Revision: 31848
2012-05-23 21:05:32 +00:00
e4720dfa95
ramips: Add byte queue limits support to net/ethernet/ramips_main.c
...
Add byte queue limits support to net/ethernet/ramips_main.c
"Byte queue limits are a mechanism to limit the size of the transmit
hardware queue on a NIC by number of bytes. The goal of these byte
limits is too reduce latency (HOL blocking) caused by excessive
queuing in hardware (aka buffer bloat) without sacrificing
throughput."
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
SVN-Revision: 31844
2012-05-23 21:05:23 +00:00
1d286fd755
ramips: Enable sysupgrade for Sitecom WL-351
...
Sysupgrade works just fine on my Sitecom WL-351 after adding this
oneliner.
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
SVN-Revision: 31843
2012-05-23 21:05:22 +00:00
39994008cb
linux: move certain disabled symbols to the generic configs
...
* CONFIG_ARCH_DMA_ADDR_T_64BIT
* CONFIG_ARCH_HAS_ILOG2_U32
* CONFIG_ARCH_HAS_ILOG2_U64
* CONFIG_ARCH_PHYS_ADDR_T_64BIT
* CONFIG_ARCH_SUPPORTS_MSI
* CONFIG_GENERIC_CPU_DEVICES
* CONFIG_HWMON_DEBUG_CHIP
* CONFIG_I2C_PXA_PCI
* CONFIG_LEDS_GPIO
* CONFIG_MINIX_FS_NATIVE_ENDIAN
* CONFIG_MLX4_CORE
* CONFIG_POWER_SUPPLY
* CONFIG_POWER_SUPPLY_DEBUG
* CONFIG_QUOTACTL
* CONFIG_SDIO_UART
* CONFIG_SENSORS_K10TEMP
* CONFIG_SENSORS_SCH56XX_COMMON
* CONFIG_SENSORS_VIA_CPUTEMP
* CONFIG_SERIO_AMBAKMI
* CONFIG_SERIO_I8042
* CONFIG_SERIO_LIBPS2
* CONFIG_SERIO_PCIPS2
* CONFIG_SERIO_RAW
* CONFIG_SERIO_SERPORT
* CONFIG_SPI_BITBANG
* CONFIG_SPI_GPIO
SVN-Revision: 31737
2012-05-15 10:58:52 +00:00
b472e5d12e
kernel: update linux 3.3 to 3.3.6
...
SVN-Revision: 31709
2012-05-14 09:18:32 +00:00
34018a630f
kernel: update linux 3.3 to 3.3.5
...
SVN-Revision: 31645
2012-05-07 20:11:43 +00:00
b0449ccf04
ramips: W306R V2.0 - GPIO and Network fixes
...
Fixed: GPIO typos and confirmed GPIO_BUTTON_RESET
Fixed: Lan & Wan reversed: swaped "eth0.2" with "eth0.1" by
removing a line(default is correct), and reversed the
Lan/wan layout LLLLW to WLLLL.
Added: image/Makefile now builds -factory.bin files. I am
unsure of the accepted way to change the makefile but
the name of the image needs to be 'linkn Kernel Image'
in order to be accepted by the OEM firmware.
Known issue: eth0 (internal switch i think has mac address:
00:11:22:33:44:55 but i think it should be same as
the lan).
Known issue: Pressing the reset button has no noticable effect,
i would expect the router to boot failsafe if being
pressed on boot, reboot if short press and reset all
to default if long press.
[juhosg: remove mtdlayout_W306R and use mtdlayout_4M instead]
Signed-off-by: David Pearce <david_18051985@hotmail.com>
SVN-Revision: 31557
2012-05-02 19:17:59 +00:00
90e99b9fe8
ramips: Make serial console for DIR-300-B1 work again
...
Make serial console for DIR-300-B1 work again.
With some recent change, "console=ttyS1,57600" was removed from the
default kernel command line, this adds the necessary mkcmdline
incantation to image/Makefile to add it there for this target.
This is quite likely broken for other targets as well.
Without this the console switches to ttyS0 instead of ttyS1 and
kernel output is missing, and the userspace comes up with 9600 baud
instead of 57600.
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
SVN-Revision: 31556
2012-05-02 19:17:58 +00:00
cbfce53831
kernel: update linux 3.3 to 3.3.4
...
SVN-Revision: 31541
2012-04-30 08:38:11 +00:00
8e06682fb7
ramips: rt305x: extract wifi eeprom and use the 8M template for the UR-336UN
...
Patch-by: Lebedev Dmitry <lebedev@trendnet.ru>
SVN-Revision: 31507
2012-04-29 07:36:33 +00:00
8fd383ae2e
kernel: update linux 3.3 to 3.3.3
...
SVN-Revision: 31460
2012-04-24 09:25:38 +00:00
1ab80c7817
ramips: rt305x: add support for the UR-336UN board
...
Patch-by: Lebedev Dmitry <lebedev@trendnet.ru>
SVN-Revision: 31451
2012-04-23 16:56:06 +00:00
3626444c6d
ramips: rt305x: add support for the Asus WL-330N3G board
...
This patch adds support for the ASUS WL-330N3G
Comparing to the WL-330N, It have 32MB ram, usb support and a bicolor led.
The bi-color led is driven by 2 gpio.
I don't know how to handle this, so I simply made 2 leds : one red, one blue.
But the red light takes precedence over the blue one according to the chart below.
r = led is red
b = led is blue
0 = led is off
xy= x->r for red, b for blue led, y->value of brightness in /sys/class/leds/x/brughtness
initial state action led gpio state
r0 b0 r0->r1 r r0 b0
r0 b0 b0->b1 b r0 b1
r1 b0 r1->r0 0 r0 b0
r1 b0 b0->b1 r r1 *b1*
r1 b1 r1->r0 b r0 b1
r1 b1 b1->b0 r r1 b0
r0 b1 r0->r1 r r1 *b1*
r0 b1 b1->b0 0 r0 r0
Signed-off-by: Frédéric Leroy <fredo@starox.org>
SVN-Revision: 31450
2012-04-23 16:56:05 +00:00
5024ffb976
ramips: nuke 3.2 suport
...
SVN-Revision: 31405
2012-04-21 12:30:53 +00:00
6c8ca78067
ramips: switch to 3.3.2
...
SVN-Revision: 31404
2012-04-21 12:30:51 +00:00
5c325b0057
ramips: add support for 3.3
...
SVN-Revision: 31403
2012-04-21 12:30:50 +00:00
7f902c962b
ramips: rt305x: add OHCI/EHCI registration code for RT3352
...
SVN-Revision: 31402
2012-04-21 12:30:48 +00:00
1645928135
ramips: rt305x: fix CPU clock detection on RT3352
...
SVN-Revision: 31401
2012-04-21 12:30:47 +00:00
fb69e28eaf
ramips: rt305x: use different memory size setup for RT3352
...
SVN-Revision: 31400
2012-04-21 12:30:45 +00:00
818aeba960
ramips: rt3883: add profile and build sysupgrade image for the RT-N56U
...
SVN-Revision: 31399
2012-04-21 12:30:44 +00:00
6b677e1d22
ramips: add swconfig to the default package list
...
SVN-Revision: 31398
2012-04-21 12:30:43 +00:00
ced031a0b2
ramips: build initramfs image for the Fonera 2.0N
...
SVN-Revision: 31397
2012-04-21 12:30:42 +00:00
fc88a363c0
ramips: rt305x: add initial support for Tenda W306R V2.0
...
More device info at: http://wiki.openwrt.org/toh/tenda/w306r
Signed-off-by: David Pearce <David_18051985@hotmail.com.au>
[juhosg: fix checkpatch errors, remove kmod-phy and luci-ssl packages
from the profile, change broken GPIO number]
SVN-Revision: 31396
2012-04-21 12:30:40 +00:00
88b5827c52
ramips: remove hardcoded console parameter from kernel configs
...
SVN-Revision: 31395
2012-04-21 12:30:30 +00:00
a8f2bc682e
kernel: also update the targets to use 3.2.15
...
Thanks Gabor for spotting it.
SVN-Revision: 31337
2012-04-17 13:12:14 +00:00
16b4cbcdd6
kernel: update linux 3.2 to 3.2.14
...
SVN-Revision: 31222
2012-04-09 14:48:51 +00:00
d87efd8c3c
kernel: update linux 3.2 to 3.2.13 and refresh patches
...
Also remove a duplicate patch from lantiq (already in generic).
SVN-Revision: 31158
2012-04-01 07:56:55 +00:00
e9c4d3d1f2
ramips: add support for the ARC FreeStation5 board, also fix WCR-150GN network setup while we're at it - thanks Pau Escrich <p4u@dabax.net> for the implementation
...
SVN-Revision: 31144
2012-03-29 16:03:04 +00:00
d495277d9f
ramips: rt305x: build image for the DIR-615 rev D boards
...
Patch from #10105 .
SVN-Revision: 31101
2012-03-27 19:29:59 +00:00
e4e24c5512
ramips: rt305x: add add support for the Asus WL-330N board
...
[juhosg: reorder several lines in order to keep things sorted
alphabetically]
Signed-off-by: Frédéric Leroy <fredo@starox.org>
SVN-Revision: 31100
2012-03-27 19:29:57 +00:00
c1dc6df8bd
kernel: update linux 3.2 to 3.2.12
...
SVN-Revision: 31028
2012-03-19 18:23:31 +00:00
18f7081e17
ramips: rt305x: add profile for the AZtech HW-5503G board
...
Patch from #11085 .
SVN-Revision: 30907
2012-03-12 17:29:06 +00:00
0f77d0b2ba
ramips: add RT3350 detection
...
SVN-Revision: 30900
2012-03-12 16:12:13 +00:00
05d3f559f5
ramips: rt305x: rewrite SoC detection
...
SVN-Revision: 30890
2012-03-11 19:05:59 +00:00
8cf8ee8f9d
ramips: rt305x: rename SYSTEM_CONFIG_* defines to RT305X_SYSCFG_*
...
SVN-Revision: 30889
2012-03-11 19:05:57 +00:00
acb4ad86e5
ramips: replace RALINK_SOC_* macros with global variables
...
SVN-Revision: 30888
2012-03-11 19:05:56 +00:00
8cff770eb3
ramips: introduce ramips_soc_prom_init and move SoC detection into that
...
SVN-Revision: 30887
2012-03-11 19:05:53 +00:00
6c51c47962
ramips: build initramfs image for DIR-{3,6}00 boards
...
SVN-Revision: 30882
2012-03-11 16:39:31 +00:00
4e15457e0e
ramips: allow to use DSP ASE on RT3xxx
...
SVN-Revision: 30879
2012-03-11 16:39:26 +00:00
0e486d2fd2
ramips: add support for unbranded XDX-RN502J board
...
This patch adds support for routers using a PCB marked XDX-RN502J
V2.0, such as some unbranded routers like this:
http://www.mediafire.com/?8acv87h6snn9fj6
http://www.mediafire.com/?do7xonw7scor4kn
http://www.mediafire.com/?1ad49zvx3e7jyix
http://www.mediafire.com/?i46cqiq66maa197
http://www.aliexpress.com/product-fm/516397994-Free-Shipping-300M-3G-WAN-Wireless-N-WiFi-USB-AP-Router-2-Antennas-wholesalers.html
some reports also state the Aceex 22Y uses the same board.
more information can be found in the following openwrt forum post
https://forum.openwrt.org/viewtopic.php?id=34878
[juhosg: fix checkpatch warnings, use the GENERIC_4M template]
Signed-off-by: bruno schwander <bruno@tinkerbox.org>
SVN-Revision: 30809
2012-03-04 16:09:13 +00:00
44c8b396f9
ramips: board support for Asus RT-N10+
...
[juhosg: fix indentation in platform scripts, and remove debug
messages from 06_set_iface_mac]
Signed-off-by: Patrick van Staveren <trick@vanstaveren.us>
SVN-Revision: 30808
2012-03-04 16:09:11 +00:00
9698a499b6
kernel: update linux 3.2 to 3.2.9
...
SVN-Revision: 30767
2012-03-01 19:49:02 +00:00
72599f0c61
ramips: don't read RAMIPS_RX_CALC_IDX0 register in the loop
...
SVN-Revision: 30733
2012-02-26 10:54:13 +00:00
100f76a010
ramips: raeth: add rx_info structure
...
This helps to reduce code size on RX path:
add/remove: 0/0 grow/shrink: 3/1 up/down: 68/-56 (12)
function old new delta
ramips_eth_open 1104 1144 +40
ramips_ring_free 212 232 +20
ramips_eth_stop 400 408 +8
ramips_eth_rx_hw 648 592 -56
SVN-Revision: 30732
2012-02-26 10:54:12 +00:00
32e7b1c7d9
ramips: raeth: add tx_info structure
...
This helps to reduce code size on TX path:
add/remove: 0/0 grow/shrink: 1/4 up/down: 56/-92 (-36)
function old new delta
ramips_eth_open 1048 1104 +56
ramips_eth_tx_housekeeping 156 148 -8
ramips_ring_free 224 212 -12
ramips_eth_stop 420 400 -20
ramips_eth_hard_start_xmit 480 428 -52
SVN-Revision: 30731
2012-02-26 10:54:10 +00:00
30143b715c
ramips: raeth: don't process disabled interrupts
...
Also rename the 'fe_int' variable.
SVN-Revision: 30713
2012-02-25 11:59:19 +00:00
6990f66861
ramips: fix FONERA20N image generation
...
SVN-Revision: 30710
2012-02-24 16:18:46 +00:00
9afeeae65e
ramips: image: increase minimum kernel partition size to 896k
...
SVN-Revision: 30706
2012-02-23 19:58:16 +00:00
7089b5213e
ramips: image: cleanup and sort templates/profiles
...
SVN-Revision: 30705
2012-02-23 19:58:15 +00:00
c8718a220b
ramips: image: use GENERIC_4M template for the ALL0256N board
...
SVN-Revision: 30704
2012-02-23 19:58:14 +00:00
507c7d30f5
ramips: image: introduce mkmtd/{,phys,spi} helpers
...
SVN-Revision: 30703
2012-02-23 19:58:12 +00:00
5f63ea18aa
ramips: image: pass mtdlayout variables by value
...
SVN-Revision: 30702
2012-02-23 19:58:11 +00:00
49e53c06b9
ramips: image: merge F5D8235V{1,2} templates
...
SVN-Revision: 30701
2012-02-23 19:58:10 +00:00
00e7277a4c
ramips: image: use generic template for the WR6202, OMNIEMB, W502U boards
...
SVN-Revision: 30700
2012-02-23 19:58:07 +00:00
554010d55b
ramips: image: introduce mkcmdline helper
...
SVN-Revision: 30699
2012-02-23 19:58:06 +00:00
32c6d63acf
ramips: image: use the GENERIC_4M template for the V11ST-FE board
...
SVN-Revision: 30698
2012-02-23 19:58:04 +00:00
ab65053cf0
ramips: image: simplify Makefile a bit
...
SVN-Revision: 30697
2012-02-23 19:58:03 +00:00
9017fce3a2
ramips: image: add MkImageLzma wrapper
...
SVN-Revision: 30696
2012-02-23 19:58:02 +00:00
c9d8f471fc
ramips: image: allow to build board specific initramfs images
...
SVN-Revision: 30695
2012-02-23 19:58:01 +00:00
c0974b46a5
ramips: merge identical switch configuration entries
...
SVN-Revision: 30688
2012-02-22 19:46:19 +00:00
a9101a144c
ramips: use unified switch identifiers in uci-defaults/network
...
SVN-Revision: 30687
2012-02-22 19:46:17 +00:00
b6522f372f
ramips: fix VLAN config of the RT-N15
...
SVN-Revision: 30686
2012-02-22 19:46:15 +00:00
a18a821733
ramips: raeth: show interrupt statistics in debugfs
...
SVN-Revision: 30681
2012-02-22 13:06:44 +00:00
214216c04d
ramips: raeth: add debugfs support
...
SVN-Revision: 30680
2012-02-22 13:06:42 +00:00
c1e4d709fa
ramips: raeth: rename main source file
...
SVN-Revision: 30679
2012-02-22 13:06:41 +00:00
5e6bc97d0c
ramips: raeth: add missing Kconfig and Makefile
...
SVN-Revision: 30671
2012-02-21 09:44:30 +00:00
3ba0f4e1ca
ramips: move the ethernet driver into a separate directory
...
Also clean up the Kconfig symbols.
SVN-Revision: 30670
2012-02-21 09:26:43 +00:00
a6d904b1d6
ramips: rename the spi driver
...
SVN-Revision: 30669
2012-02-21 09:26:41 +00:00
dd001a4b0f
ramips: rt3883: make rt3883_nand_data visible
...
SVN-Revision: 30655
2012-02-19 19:40:37 +00:00
62f213eab9
ramips: merge 3.2 fixes
...
SVN-Revision: 30652
2012-02-19 17:52:23 +00:00
18fdaee00b
ramips: nuke 2.6.39 support
...
SVN-Revision: 30651
2012-02-19 17:52:20 +00:00
e2ea72515f
ramips: rt305x: nuke built-in MTD partition maps
...
SVN-Revision: 30650
2012-02-19 17:52:15 +00:00
de6405c898
ramips: rt288x: nuke built-in MTD partition maps
...
SVN-Revision: 30649
2012-02-19 17:52:11 +00:00
e7f59b9326
ramips: build sysupgrade image for the V11ST-FE board
...
SVN-Revision: 30648
2012-02-19 17:52:08 +00:00
3489515a7e
ramips: rt305x: add support for the Skyline SL-R7205 Wireless 3G router
...
[juhosg:
- don't switch back to 2.6.39
- update config-3.2
- change machine id to SL-R7205
- reorder case entries in platform scripts
- remove button hotplug script]
Signed-off-by: Haipoh Teoh <hpteoh@ceedtec.com>
SVN-Revision: 30645
2012-02-19 16:44:49 +00:00
990ed96a2a
ralink: rt3883: disable the 2GHz band on the RT-N56U
...
SVN-Revision: 30632
2012-02-18 17:36:21 +00:00
5710530c41
ramips: rt3883: make rt3883_wlan_data visible
...
SVN-Revision: 30631
2012-02-18 17:36:16 +00:00
e17a3ffbbd
ramips: extract eeprom for the built-in wlan module on the RT-N56U
...
SVN-Revision: 30604
2012-02-16 20:06:22 +00:00
dabca24361
ramips: rt3883: change eeprom file name
...
SVN-Revision: 30603
2012-02-16 20:06:21 +00:00
00d963999d
ramips: select HW_HAS_PCI on per-board basis
...
SVN-Revision: 30576
2012-02-16 08:17:54 +00:00
fc967295ec
ramips: rt3883: remove a stray character from rt3883.h
...
SVN-Revision: 30575
2012-02-16 08:17:53 +00:00
b4af07d5c0
ramips: rt288x: don't register the PCI controller on each board
...
SVN-Revision: 30574
2012-02-16 08:17:52 +00:00
f8a56dc8df
ramips: raeth: separate ring allocation and setup
...
SVN-Revision: 30573
2012-02-16 08:17:50 +00:00
49fc54be3d
ramips: rt288x: fix PCI resource conflict
...
SVN-Revision: 30563
2012-02-15 21:19:02 +00:00
37f8c19028
correct PCI IO/Mem resource swapping
...
SVN-Revision: 30562
2012-02-15 21:13:21 +00:00
3ceebbba14
add Ralink V11ST-FE board support
...
This board is equipped with:
- 4MB of NOR Flash
- 32MB of SDRAM
- IC+ IP175C switch
- one Mini-PCI slot
SVN-Revision: 30561
2012-02-15 21:13:11 +00:00
8b8d9a8336
ramips: raeth: add a helper function for skb allocation
...
SVN-Revision: 30555
2012-02-15 18:33:42 +00:00
e57546de83
ramips: raeth: use netdev_alloc_skb
...
SVN-Revision: 30554
2012-02-15 18:33:41 +00:00
064855314b
ramips: raeth: add '__packed __aligned(4)' annotation to dma descritor structures
...
This helps GCC to generare more efficient code.
SVN-Revision: 30553
2012-02-15 18:33:40 +00:00
8c95385d78
ramips: raeth: use 're' instead of 'priv' everywhere
...
SVN-Revision: 30552
2012-02-15 18:33:38 +00:00
b3b79365f3
ramips: raeth: force link down in ramips_phy_stop
...
SVN-Revision: 30550
2012-02-15 13:47:52 +00:00
3e7b461431
ramips: raeth: serialize ramips_link_adjust calls
...
SVN-Revision: 30549
2012-02-15 13:47:50 +00:00
dcb13d4098
ramips: raeth: add PHYLIB support
...
SVN-Revision: 30547
2012-02-15 06:47:12 +00:00
02a01a16c7
ramips: extract eeprom for the PCIe wlan module on the RT-N56U
...
SVN-Revision: 30529
2012-02-14 17:32:45 +00:00
43d1a2c3ab
ramips: rt3883: enable PCI on the RT-N56U board
...
SVN-Revision: 30528
2012-02-14 17:32:44 +00:00
784be92e39
ramips: rt3883: add PCI support
...
SVN-Revision: 30527
2012-02-14 17:32:42 +00:00
10f00dc48b
ramips: rt3883: sync 2.6.39 config
...
SVN-Revision: 30526
2012-02-14 17:32:41 +00:00
ed79921fe5
ramips: use SoC specific irq.h
...
SVN-Revision: 30525
2012-02-14 17:32:40 +00:00
8d5dfa75e6
ramips: rt3883: update package list in the default profile
...
SVN-Revision: 30499
2012-02-13 15:18:05 +00:00
99c019fb0d
ramips: add preliminary support for the Asus RT-N56U board
...
SVN-Revision: 30498
2012-02-13 15:18:04 +00:00
97e641a0e6
ramips: raeth: enable MDIO code for RT3883
...
SVN-Revision: 30497
2012-02-13 15:18:03 +00:00
e532fa5fd4
ramips: add preliminary support for the RT3662/RT3883 SoCs
...
SVN-Revision: 30495
2012-02-13 15:17:59 +00:00
22ec8b4839
ramips: use GENERIC_{4,8}M image template for WR5123GN
...
SVN-Revision: 30483
2012-02-12 18:04:47 +00:00
b7f129e19b
ramips: rt305x: pass MTD partition map to the ALL0256N via cmdline
...
SVN-Revision: 30482
2012-02-12 18:04:46 +00:00
a287c60a61
ramips: add initial support for 3.2
...
SVN-Revision: 30476
2012-02-12 12:52:14 +00:00
388013b0ce
ramips: include 'linux/module.h' in the ramips_spi driver
...
SVN-Revision: 30475
2012-02-12 12:52:13 +00:00
faae4235c4
ramips: rt288x: remove per-board physmap_flash_data instances
...
SVN-Revision: 30474
2012-02-12 12:52:12 +00:00
3502e2b93f
ramips: rt305x: remove per-board physmap_flash_data instances
...
SVN-Revision: 30473
2012-02-12 12:52:10 +00:00
3a11dcdaa8
ramips: load gpio-polled keys module
...
SVN-Revision: 30463
2012-02-11 20:37:34 +00:00
323ece9474
ramips: remove yet another CONFIG_MTD_PARTITION ifdef
...
SVN-Revision: 30462
2012-02-11 19:37:11 +00:00
32b9e8c750
ramips: use gpio-keys-polled instead of gpio-buttons
...
SVN-Revision: 30461
2012-02-11 19:37:06 +00:00
80b40497de
ramips: add MIPS platform file
...
SVN-Revision: 30459
2012-02-11 18:16:11 +00:00
4e1b870f3e
ramips: add MDIO bus support for RT288X
...
SVN-Revision: 30455
2012-02-11 16:49:56 +00:00
34a9ccf544
ramips: fix Belkin F5D8235-v2 VLAN setup
...
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 30452
2012-02-11 15:31:18 +00:00
8916c02b47
ramips: raeth: make debugging messages configurable
...
SVN-Revision: 30450
2012-02-11 15:12:10 +00:00
aac3ad4c0e
ramips: raeth: use device pointer in DMA API calls
...
SVN-Revision: 30449
2012-02-11 15:12:08 +00:00
1fd8724e94
ramips: raeth: add netdev pointer to private structure
...
SVN-Revision: 30448
2012-02-11 15:12:06 +00:00
c6fa11d00f
ramips: raeth: cleanup DMA API usage in ramips_eth_hard_start_xmit
...
SVN-Revision: 30447
2012-02-11 15:12:05 +00:00
2d055f130e
ramips: raeth: unmap rx DMA address in ramips_cleanup_dma
...
SVN-Revision: 30446
2012-02-11 15:12:04 +00:00
7bd7ddcf4e
ramips: raeth: add rx_dma array to store the DMA address of the rx packets
...
SVN-Revision: 30445
2012-02-11 15:12:02 +00:00
647af823d9
ramips: raeth: use dma_addr_t for the descriptors
...
SVN-Revision: 30444
2012-02-11 15:12:01 +00:00
df5892d1f1
ramips: raeth: unmap DMA memory when a packet is received
...
SVN-Revision: 30443
2012-02-11 15:11:56 +00:00
617954ca5d
ramips: raeth: add a temporary pktlen variable
...
SVN-Revision: 30442
2012-02-11 15:11:55 +00:00
d1d492eaf9
ramips: raeth: protect macro parameters
...
SVN-Revision: 30441
2012-02-11 15:11:50 +00:00
8250692359
ramips: raeth: indicate dropped packets in stats
...
SVN-Revision: 30440
2012-02-11 15:11:49 +00:00
c67adbbddb
ramips: raeth: use the NUM_TX_DESC for the tx_skb array
...
SVN-Revision: 30439
2012-02-11 15:11:47 +00:00
a2c8789578
ramips: use uncached address in detect_mem_size
...
SVN-Revision: 30438
2012-02-11 15:11:45 +00:00
ba4c9b3a8f
ramips: rt305x: remove CONFIG_MTD_PARTITION ifdefery from machine files
...
SVN-Revision: 30437
2012-02-11 15:11:43 +00:00
f2dd67dc09
ramips: rt288x: remove CONFIG_MTD_PARTITION ifdefery from machine files
...
SVN-Revision: 30436
2012-02-11 15:11:41 +00:00
d6b9f88743
ramips: refresh patches
...
SVN-Revision: 30435
2012-02-11 15:11:40 +00:00
9cde29f1a7
ramips: rt305x: add support for Accton WR6202 / SMCWBR11S-3GN
...
This patch adds support for the Accton WR6202 Mini 3G broadband router.
Full details for this device are available at
http://www.awbnetworks.com/products03.php?Fullkey=19 .
This device is identical to the SMCWBR11S-3GN:
http://www.smc-asia.com/products03.php?Fullkey=210
It's also worth noting that this board has a GPIO line to control the
power to the USB port.
[juhosg:
- fix checkpatch warnings,
- reorder Kconfig entry,
- merge the sysupgrade patch,
- add GPL header]
Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com>
SVN-Revision: 30434
2012-02-11 15:11:36 +00:00
59b474732c
ramips: rt305x: merge duplicated mac address setup
...
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 30433
2012-02-11 15:11:34 +00:00
7298ef2456
ramips: rt305x: add profile for the Belkin f5d8235v2
...
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 30432
2012-02-11 15:11:32 +00:00
0430194cc3
ramips: fix compiler warning in prom.c
...
SVN-Revision: 30424
2012-02-10 17:38:46 +00:00
44ed690cb3
ramips: change vlan_config for the ALFA W502U board
...
This change moves the WAN port into a separate VLAN.
SVN-Revision: 29969
2012-01-31 18:34:10 +00:00
b3fdd931d1
ramips: add support for Sitecom WL-341v3 and other Sercomm IP1006RRv2 boards
...
This patch adds support for the Sitecom WL-341 v3 and other Sercomm
IP1006RRv2 based boards for sysupgrade support and for the initial
flash through pushbutton initiated recovery mode with the special
partition table and fixes for the quirks and things required by the
modified bootloader.
There is a known bug, Wi-Fi is not working on my board probably
because of the lack of RAM (the board only has 16MiB ram -- half of
the normal amount for non rebadged versions, but there is an empty
slot for another ram chip,) but I don't know for sure. The driver
loads but hostapd fails to load so I think it's not related to the
specific device except for the lack of RAM.
Moreover, only 7 of the 11 onboard leds are confirmed working, it
seems that one of the others is always on and the remaining ones are
connected to the wireless card leds already recognized by OpenWrt
[juhosg: reordered some parts in order to keep things sorted
alphabetically]
Signed-off-by: Marco Antonio Mauro <marcus90@gmail.com>
SVN-Revision: 29910
2012-01-26 10:44:23 +00:00
02e77c6ae1
ramips: generate sysupgrade image for the ALL0256N
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 29884
2012-01-24 11:48:48 +00:00
944c8aacdb
ramips: add user-space support for ALL0256N
...
This adds uci-defaults and sysupgrade support for the ALL0256N.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 29883
2012-01-24 11:48:47 +00:00
1932a7205c
ramips: add kernel support for ALL0256N
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 29882
2012-01-24 11:48:45 +00:00
9cf1d4e06e
ramips: scripts updates
...
In this patch:
* rename Argus leds to avoid underscores
* rename Belkin F5D8235 v1 leds from f5d8234 to f5d8235
* remove Belkin F5D8235 v1 status led defined as storage led (it was
defined as usb led earlier, just in wrong place) - it should have
router led as in v2
* add Argus, Sparklan and Belkin F5D8235 v2 status leds
* add Belkin F5D8235 v1 and v2 usb leds
* fix Belkin F5D8235 v2 network config generation and mac address axtraction
* fix Sparklan board identification
* add Sparklan usb led (this board doesn't have usb connector by
default and the led is hidden also but if you are going to solder
the connector then you'll see the led too)
* add Sparklan network config generation and mac address extraction
* fix empty string test in network script and...
* ...sort case entries by the first board in the list
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 29871
2012-01-23 10:23:32 +00:00
809fe38e41
ramips fix f5d8235-v1 diag LED support
...
SVN-Revision: 29857
2012-01-22 18:11:39 +00:00
e9d8deaaed
ramips: add sysled and sysupgrade to wr512-3gn
...
Patch from #10035 .
SVN-Revision: 29847
2012-01-22 13:43:23 +00:00
557cf076b4
ramips: sysupgrade for ESR-9753
...
This patch add sysupgrade for Engenius ESR-9753
Signed-off-by: Artur Wronowski <arteqw@gmail.com>
SVN-Revision: 29824
2012-01-20 10:49:26 +00:00
a2708d11e8
ramips: Rework ramips_eth to not require irqsave locking anymore
...
Previously the tx housekeeping was done in a spin_lock_irqsave critical
section which causes irqs to be disabled during that time. Since the
housekeeping is already prepared to be scheduled as a tasklet process
the housekeeping only in softirq context and revise the locking between
the tx path and the housekeeping tasklet by using a normal spin_lock
which in most situations will be a NOP anyway.
This makes sure that interrupts are only disabled for a short time
since in the worst case the housekeeping might have to free up to 256
skbs.
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
SVN-Revision: 29762
2012-01-17 11:23:11 +00:00
244c322d25
ramips: rt288x: add support for the Belkin F5D8235-4 v1 board
...
Patch-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
SVN-Revision: 29617
2011-12-28 08:43:43 +00:00
f50b02b559
ramips: rt288x: change base address and window size of flash bank 0
...
SVN-Revision: 29616
2011-12-28 08:43:36 +00:00
98437278c4
ramips: rt305x: add support for the ALFA Networks W502U (R36) board
...
SVN-Revision: 29615
2011-12-28 08:43:32 +00:00
723d8dd74f
ramips: rt288x: add support for the Buffalo WLI-TX4-AG300N board
...
SVN-Revision: 29612
2011-12-27 16:56:30 +00:00
7b1e525b56
ramips: initial support for Sitecom WL-351 v1 002
...
This add support for the Sitecom WL-351 v1 002.
In principle the Engenius ESR9850 should also work with this, but I
don't have the hardware to test it.
Since an external gigabit switch (RTL8366RB) is used,
I had to modify the ramips_esw driver to add a 'bypass' mode, which
just configures it to not filter the vlan tags.
Also two initialization words (FCT2 and FPA2) are set to different
values by u-boot than what the driver is using and it only seems to
work correctly when they not overridden by the driver, so I
added them to the platform specific data as reg_initval_fct2 and
reg_initval_fpa2.
With this wired lan works as expected, however I'm still having some
trouble with the wireless lan:
It only works after I rmmod & re-insmod rt2800pci and then
reconfigure it in the webinterface, but not directly after
rebooting.
The symptom of this is wpad saying:
Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: associated (aid 1)
Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> WPA: pairwise key handshake completed (RSN)
Dec 20 15:45:22 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: authenticated
But wpa_supplicant on the client saying:
Authentication with <wl351mac> timed out.
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
SVN-Revision: 29604
2011-12-23 14:27:16 +00:00
2cb946f5b4
ramips: add support for the Senao/EnGenius ESR-9753 board
...
Signed-off-by: Artur Wronowski <arteqw@gmail.com>
SVN-Revision: 29603
2011-12-23 14:27:10 +00:00
03bce34384
ramips: define firmware partition for Omnima MiniEMBWiFi
...
Patch-by: Ivan Ignjatic <ivan@omnima.co.uk>
SVN-Revision: 29602
2011-12-23 14:27:05 +00:00
0c38d36488
ramips: add support for Omnima MiniEMBWiFi board
...
This patch adds support for the Omnima MiniEMBWiFi
Ralink RT3050F based board.
Based on a patch by Ivan Ignjatic <ivan at omnima.co.uk>
SVN-Revision: 29533
2011-12-14 20:51:26 +00:00
43bd4c6ad1
ramips: fix mac addresses on the DIR-300/600 boards
...
SVN-Revision: 29471
2011-12-06 20:06:08 +00:00
5ef6ec4a31
ramips: set mac addresses for the NBG-419N
...
Based on a patch by Nerijus Baliunas <nerijus@users.sourceforge.net>
SVN-Revision: 29454
2011-12-05 17:27:07 +00:00
750d560767
ramips: set preinit interface mac on the hw550-3g board
...
Based on a patch by Daniel Golle <dgolle@allnet.de>
SVN-Revision: 29453
2011-12-05 17:27:06 +00:00
b5d7b359b2
ramips: use ramips_get_mac_* functions in the preinit script
...
SVN-Revision: 29452
2011-12-05 17:27:04 +00:00
4d5b940e66
ramips: move ramips_get_mac_* functions to lib/ramips.sh
...
SVN-Revision: 29451
2011-12-05 17:27:03 +00:00
cc853acb3a
ramips: add ramips_ prefix to get_mac_{binary,nvram} functions
...
SVN-Revision: 29450
2011-12-05 17:27:02 +00:00
b1137d48a4
ramips: fix network configuration setup
...
SVN-Revision: 29448
2011-12-05 16:54:48 +00:00
56c9b50006
ramips: fix argus board rootfs size
...
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 29422
2011-12-04 15:24:57 +00:00
3fccc3b376
ramips: enable sysupgrade on the RT-N15 board
...
SVN-Revision: 29393
2011-12-01 22:48:58 +00:00
4b2d1c3ad3
ramips: wrap long line in platform upgrade script
...
SVN-Revision: 29392
2011-12-01 22:48:57 +00:00
d622263588
ramips: add profile for the Asus RT-N15
...
This uses previously submitted rtl8366 kernel packages.
[juhosg: The kmod-gpio-dev package has been removed from the package list.]
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 29391
2011-12-01 22:48:55 +00:00
3a9e02fa41
ramips: setup default network configuration for RT-N15
...
Based on a patch by Roman Yeryomin <roman@advem.lv>
SVN-Revision: 29390
2011-12-01 22:48:54 +00:00
fc61c107f0
ramips: rt288x: add swconfig and rtl8366{s,_smi} drivers to the default profile
...
It is needed by the RT-N15 board.
SVN-Revision: 29389
2011-12-01 22:48:53 +00:00
80221fcd2a
ramips: remove default network configuration, and generate that from uci-defaults
...
SVN-Revision: 29387
2011-12-01 22:48:51 +00:00
4f6c58adac
ramips: use /lib/functions/uci-defaults.sh
...
SVN-Revision: 29386
2011-12-01 22:48:48 +00:00
569d8de6d6
ramips: simplify uci-defaults/network script
...
SVN-Revision: 29383
2011-12-01 22:48:45 +00:00
66c9a351dd
ramips: setup mac and network interfaces from separate functions
...
SVN-Revision: 29382
2011-12-01 22:48:43 +00:00
62d18e9f9a
ramips: fix Asus RT-N15 board support
...
Fix Asus RT-N15 flash partitions and make an image.
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 29381
2011-12-01 22:48:42 +00:00
2dd79d55c7
ramips: Sparklan wcr-150gn board fixes
...
* Fix partition sizes.
* Add buttons and leds.
* Register usb.
* Remove unnecessary stuff from image Makefile
* Fix rt2x00 eeprom extract.
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 29380
2011-12-01 22:48:41 +00:00
7c678e7511
ramips: fix package name of kmod-input-gpio-buttons
...
Based on a patch from Omnima Limited.
SVN-Revision: 29379
2011-12-01 22:48:39 +00:00
2ed38b24a8
ramips: move kmod-rt2800-pci to DEFAULT_PACKAGES
...
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 29378
2011-12-01 22:48:38 +00:00
295e04084c
ramips: setup bc2 mac addresses from the generic network script
...
SVN-Revision: 29377
2011-12-01 22:48:37 +00:00
02f95d4fb3
ramips: combine network setup for all boards in one file
...
Inspired by the patch from Roman Yeryomin. Thanks, Roman!
This removes unnecessary duplication and simplifies network setup for new
boards. It would be a one line change most likely.
[juhosg: setup lan and wan interfaces for unspecified rt3x0x based boards
in order to avoid regression]
Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
SVN-Revision: 29376
2011-12-01 22:48:35 +00:00
17ccd4aec4
rt305x: Create factory image for Fonera 2.0n
...
SVN-Revision: 28689
2011-10-31 09:23:44 +00:00
ee8077f0fe
ramips: Support for NexAira BC2
...
The preconfiguration of the USB LED has benn move to the
/etc/uci-defaults/leds script. [juhosg]
Signed-off-by: Adam Porter <porter.adam at gmail.com>
SVN-Revision: 28571
2011-10-24 21:49:36 +00:00
18452a753b
ramips: fix switch-port assignment for HW550-3G
...
WAN is on swtich port 0 for Aztech HW550-3G.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 28570
2011-10-24 21:49:32 +00:00
68a01c0180
ramips: combine led setup for all boards in one file
...
This removes unnecessary duplication and simplifies led setup for new
boards. It would be a one line change most likely.
Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
SVN-Revision: 28569
2011-10-24 21:49:31 +00:00
72e117ec79
ramips: rt305x: add support for the ZyXEL NBG-419N board
...
SVN-Revision: 28078
2011-08-22 20:41:49 +00:00
4b96d3af2a
ramips: rt305x: remove unused defines from mach-nw718.c
...
SVN-Revision: 28077
2011-08-22 20:41:48 +00:00
462ca22e9c
ramips: sort Makefile entries
...
SVN-Revision: 28076
2011-08-22 20:41:47 +00:00
d50494f3bb
ramips: sort RAMIPS_MACH_* defines
...
SVN-Revision: 28075
2011-08-22 20:41:45 +00:00
90686691ce
ramips: fix wireless firmware extraction for wr512-3gn
...
Signed-off-by: Andrew Andrianov <necromant@necromant.ath.cx>
SVN-Revision: 28073
2011-08-22 18:08:45 +00:00
f0049824b9
ramips: remove 'default [yn]' keywords from machine Kconfig entries
...
SVN-Revision: 28054
2011-08-19 15:55:12 +00:00
6720025497
ramips: rt305x: fix wr512n image generation
...
SVN-Revision: 28053
2011-08-19 15:55:11 +00:00
9085b05d9e
ramips: rt305x: support for wr512-3gn-like routers
...
Signed-off-by: Andrew Andrianov <necromant@necromant.ath.cx>
SVN-Revision: 28052
2011-08-19 15:55:10 +00:00
46b101ad0a
ramips: register usb on Belkin F5D8235 v2 and Argus ATP-52-B routers
...
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 28051
2011-08-19 15:55:08 +00:00
05209860da
ramips: fix wireless on Belkin F5D8235 v2
...
Fix wireless firmware extract from flash for Belkin F5D8235 v2.
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 28050
2011-08-19 15:55:07 +00:00
f8ab604eb6
ramips: fix typo in default packages
...
Fix fivebytepypo - there is no such kernel module wpad-mini :)
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 28049
2011-08-19 15:55:05 +00:00
09b1073f9b
kernel: update kernel to version 2.6.39.4
...
SVN-Revision: 28022
2011-08-16 22:04:10 +00:00
ace8ce0845
ramips: use maccalc instead of hexdump + sed
...
SVN-Revision: 28007
2011-08-15 19:00:23 +00:00
bfc47ffead
ramips: rt305x: fix mac addresses on the Netcore NW718 board
...
SVN-Revision: 28006
2011-08-15 18:55:53 +00:00
17c041cd0b
ramips: add maccalc to the default package list
...
SVN-Revision: 28005
2011-08-15 18:55:52 +00:00
67e480971c
ramips: add input drivers to the default package list
...
SVN-Revision: 28003
2011-08-15 18:55:50 +00:00
35ecf12059
ramips: rt305x: make config and factory partitions read-only on the ATP-52B
...
SVN-Revision: 28002
2011-08-15 18:55:48 +00:00
75e2360ab3
ramips: add uci-defaults scripts to preconfigure USB LEDs
...
SVN-Revision: 28000
2011-08-15 14:12:00 +00:00
e1b176de82
ramips: rt305x: add some USB modules to the default profile
...
SVN-Revision: 27999
2011-08-15 14:11:58 +00:00
169d68c98c
ramips: rt305x: add dwc_otg driver
...
Based on a patch by Layne Edwards <ledwards@astrumtech.net>
SVN-Revision: 27997
2011-08-15 14:11:55 +00:00
0ca16a4600
ramips: rt305x: register the dwc_otg device on the relevant boards
...
SVN-Revision: 27996
2011-08-15 14:11:52 +00:00
addc86fdbd
ramips: rt305x: add dwc_otg platform device
...
Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
SVN-Revision: 27995
2011-08-15 14:11:51 +00:00
6ef87ff5e6
ramips: sync kernel config
...
SVN-Revision: 27993
2011-08-15 14:11:48 +00:00
4ee4fc9725
ramips: load the input drivers during preinit
...
SVN-Revision: 27992
2011-08-15 14:11:47 +00:00
a3c7e71ae1
ramips: add support for Argus ATP-52B
...
[The ESW related changes has been removed - juhosg]
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 27991
2011-08-15 14:11:45 +00:00
1ebcf03789
ramips: allow to specify port layout for the switch of the RT305x/RT3350
...
Based on a patch by Roman Yeryomin <roman@advem.lv>
SVN-Revision: 27990
2011-08-15 14:11:43 +00:00
ea211c4d90
ramips: rt305x: add support for the Netcore NW718 board
...
SVN-Revision: 27813
2011-07-28 10:56:32 +00:00
437e184484
ramips: rt305x: add support for the Asus RT-G32 B1 board
...
Based on a patch by: Sergiy <piratfm@gmail.com>
SVN-Revision: 27812
2011-07-28 10:56:30 +00:00
7193f29d96
ramips: rt305x: enable M25P80 driver
...
Based on a patch by Sergiy <piratfm@gmail.com>
SVN-Revision: 27811
2011-07-28 10:56:28 +00:00
c6db514de8
ramips: rt305x: introduce rt305x_register_spi helper
...
Based on a patch by Sergiy <piratfm@gmail.com>
SVN-Revision: 27810
2011-07-28 10:56:27 +00:00
57122e7ccc
ramips: add SPI controller driver
...
Based on a patch by Sergiy <piratfm@gmail.com>
SVN-Revision: 27809
2011-07-28 10:56:25 +00:00
3f986df05f
ramips: rt305x: add support for the DIR-600 B1,B2 boards
...
SVN-Revision: 27808
2011-07-28 10:56:24 +00:00
857c1028ac
ramips: rt305x: change machine id for DIR-300
...
SVN-Revision: 27807
2011-07-28 10:56:22 +00:00
42d3a55347
ramips: rt305x: rename LEDs on the DIR-300-B1
...
SVN-Revision: 27806
2011-07-28 10:56:21 +00:00
39689b648f
ramips: rt305x: sort Kconfig/Makefile entries
...
SVN-Revision: 27805
2011-07-28 10:56:19 +00:00
32c0534516
ramips: rt305x: fix uci-defaults/network script for the RT3350 based boards
...
This change corrects expected CPU name of Ralink RT3050, which
describes itself as RT3350 (this name is ripped off chip and elevated
to user space via /proc/cpuinfo.)
This patch fixes wired network on DIR-300 rev B and DIR-600 rev B
Signed-off-by: Slawomir Cygan <wiewior@wiewior.eu.org>
SVN-Revision: 27804
2011-07-28 10:56:18 +00:00
57663ce25b
ramips: fix PWH2004 image generation
...
SVN-Revision: 27803
2011-07-28 10:56:15 +00:00
1afe8a0726
rtl8366: unify rtl8366s and rtl8366rb platform data
...
SVN-Revision: 27754
2011-07-24 14:40:23 +00:00
abb1ca01a7
ramips: fix buffalo image generation
...
SVN-Revision: 27495
2011-07-06 16:46:33 +00:00
1a4e7153b6
ramips: add diag support for RT-N15 and PWH2004
...
Also sort the board names alphabetically.
SVN-Revision: 27478
2011-07-06 08:05:00 +00:00
d6985f5b46
ramips: use the 'router' LED for diagnostic on the WHR-G300N board
...
SVN-Revision: 27477
2011-07-06 08:04:55 +00:00
2cc346b8e0
ramips: create tftp image for the WHR-G300N board
...
SVN-Revision: 27476
2011-07-06 08:04:54 +00:00
0dc18d8586
ramips: create factory image for the WHR-G300N board
...
SVN-Revision: 27474
2011-07-06 08:04:52 +00:00
e9c8218375
ramips: create factory image for DIR-300-B1
...
SVN-Revision: 27439
2011-07-04 06:48:45 +00:00
6e7b802297
ramips: merge 2.6.39 patches
...
SVN-Revision: 27399
2011-07-03 15:02:10 +00:00
646f64d389
ramips: remove 2.6.37 stuff
...
SVN-Revision: 27398
2011-07-03 15:02:09 +00:00
2fc6be00f4
ramips: switch to 2.6.39.2
...
SVN-Revision: 27397
2011-07-03 15:02:07 +00:00
0fde070cf9
ramips: add 2.6.39 support
...
Based on the patches from #9625
SVN-Revision: 27396
2011-07-03 15:02:06 +00:00
c8010517d5
ramips: add hotplug script to extract eeprom for the rt2x00 driver
...
SVN-Revision: 27393
2011-07-03 15:02:01 +00:00
3334d0604e
ramips: specify eeprom file name on RT305X
...
SVN-Revision: 27392
2011-07-03 15:02:00 +00:00
f53cc4c439
ramips: specify eeprom file name on RT288X
...
SVN-Revision: 27391
2011-07-03 15:01:59 +00:00
521e495f4b
ramips: add all supported boards to lib/ramips.sh
...
SVN-Revision: 27389
2011-07-03 15:01:56 +00:00
6f54df889a
ramips: check the size of the uImage in image generation
...
SVN-Revision: 27388
2011-07-03 15:01:55 +00:00
575a5286c8
ramips: use lowercase partiion names on the WCR150GN board
...
SVN-Revision: 27387
2011-07-03 15:01:53 +00:00
31facf0b75
ramips: use different partition names in the DIR-300-B1 image
...
SVN-Revision: 27386
2011-07-03 15:01:52 +00:00
dbe55f08f0
ramips: force word write on flashes with AMD cmdset ( #9252 )
...
SVN-Revision: 27385
2011-07-03 15:01:51 +00:00
f1cf43d468
ramips: update partition map for DIR-300-B1
...
Patch by Layne Edwards from #9252 .
SVN-Revision: 27384
2011-07-03 15:01:49 +00:00
641c87b127
ramips: consistently use 'firmware' name for sysupgrade partitions
...
SVN-Revision: 27383
2011-07-03 15:01:48 +00:00
381d7f05af
ramips: fix a section mismatch warning
...
SVN-Revision: 27382
2011-07-03 15:01:46 +00:00
16ad91d69f
ramips: remove unused include from the common GPIO code
...
SVN-Revision: 27381
2011-07-03 15:01:44 +00:00
c9f3e7082f
ramips: disable watchdog on sysupgrade
...
SVN-Revision: 27380
2011-07-03 15:01:43 +00:00
e70e6f6848
ramips: swap target check in image generation
...
SVN-Revision: 27379
2011-07-03 15:01:42 +00:00
affb57ee27
ramips: update HW550-3G mtd partitions
...
This patch updates the mtd partitions for the Aztech HW550-3G
Signed-off-by: Layne Edwards <ledwards@astrumtech.net>
SVN-Revision: 27378
2011-07-03 15:01:41 +00:00
3099ffe414
ramips: set cp0_perfcount_irq for RT305X
...
SVN-Revision: 27377
2011-07-03 15:01:40 +00:00
d5a7e2f5c1
ramips: initial board support for MOFI3500-3GN
...
This patch adds initial board support for the MoFi Network MOFI3500-3GN
(Ralink RT3052F SoC, 8MB flash, 32MB ram, wireless N, USB-OTG). This
router is basically the NA version of the HW550-3G.
Signed-off-by: Layne Edwards <ledwards76@gmail.com>
SVN-Revision: 26466
2011-04-04 08:43:07 +00:00
50c743e79e
kernel: Update to version 2.6.37.6
...
Thank you Peter Wagner for the patch
SVN-Revision: 26441
2011-04-03 13:59:07 +00:00
87f5872f35
ramips: remove 2.6.36 stuff
...
SVN-Revision: 26329
2011-03-27 19:20:06 +00:00
90d37adb8d
ramips: switch to 2.6.37
...
SVN-Revision: 26328
2011-03-27 19:20:04 +00:00
1844ea6c7b
ramips: UPF_FIXED_TYPE must be set for the serial ports
...
SVN-Revision: 26327
2011-03-27 19:20:03 +00:00
9ef4785364
ramips: define GPIO chips separately for each SoCs
...
SVN-Revision: 26326
2011-03-27 19:19:59 +00:00
37d6d88869
ramips: move GPIO definitions into a separate header file
...
SVN-Revision: 26325
2011-03-27 19:19:57 +00:00
251a367fb4
ramips: setup GPIO chip functions on the fly
...
SVN-Revision: 26324
2011-03-27 19:19:51 +00:00
b03f2dfcee
ramips: use separate register base for GPIO chips
...
SVN-Revision: 26323
2011-03-27 19:19:48 +00:00
8770359f17
ramips: fix dir-300 mtd layout
...
Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
SVN-Revision: 26322
2011-03-27 19:19:45 +00:00
f599459abb
ramips: enable MDIO on the HW550-3G board
...
SVN-Revision: 26321
2011-03-27 19:19:41 +00:00
d701a72760
ramips: add sysupgrade and status LED support for HW550-3G
...
This patch adds sysupgrade and status LED support for the Aztech
HW550-3G. Some LED GPIOs were changed for clarity.
Signed-off-by: Layne Edwards <ledwards76@gmail.com>
SVN-Revision: 26320
2011-03-27 19:19:40 +00:00
335877a2b3
global cflags: remove -funit-at-a-time, it is ignored by recent compilers. instead add -fno-caller-saves, which improves compression ratio for generated code with no apparent negative effects on performance
...
SVN-Revision: 26300
2011-03-26 01:07:12 +00:00
23518bb2e4
ramips: initial board support for Aztech HW550-3G
...
This patch adds initial support for the Aztech HW550-3G (Ralink
RT3052f SoC, 8MB flash, 32MB dram). Ethernet is not working yet.
Wireless appears to work fine. USB does not work yet (as with other
Ralink boards).
Signed-off-by: Layne Edwards <ledwards76@gmail.com>
SVN-Revision: 26123
2011-03-13 16:34:52 +00:00
45c9f5e75e
update to kernel 2.6.36.4
...
SVN-Revision: 25580
2011-02-19 12:44:07 +00:00
1c92e047c8
ramips: register watchdog device on the rt288x boards
...
SVN-Revision: 25130
2011-01-26 20:48:52 +00:00
2b50cecea6
ramips: add watchdog device for RT288x
...
SVN-Revision: 25129
2011-01-26 20:48:50 +00:00
764aa3fe9c
ramips: register watchdog device on the rt305x boards
...
SVN-Revision: 25128
2011-01-26 20:48:47 +00:00
42e36cf732
ramips: add watchdog device for RT305x
...
SVN-Revision: 25127
2011-01-26 20:48:46 +00:00
16366feafb
ramips: add watchdog driver
...
SVN-Revision: 25126
2011-01-26 20:48:41 +00:00
f38367fcb4
ramips: implement clock API for RT288x
...
SVN-Revision: 25125
2011-01-26 20:48:39 +00:00
b0ffa70248
ramips: implement clock API for RT305X
...
SVN-Revision: 25124
2011-01-26 20:48:35 +00:00
f9e74383a9
ramips: remove extern and __init from function prototypes
...
SVN-Revision: 25123
2011-01-26 20:48:33 +00:00
b99a637795
ramips: ramips_esw: fix typos
...
Patch from #8577 .
SVN-Revision: 24898
2011-01-04 13:44:05 +00:00
d2fdd1dbe1
ramips: remove 2.6.3[24] support
...
SVN-Revision: 24562
2010-12-14 08:00:31 +00:00
1403850be1
ramips: switch to 2.6.36
...
SVN-Revision: 24561
2010-12-14 08:00:29 +00:00
f9898e30fb
ramips: handle OTG interrupt on the RT305x SoC
...
SVN-Revision: 24560
2010-12-14 08:00:25 +00:00
5a351509aa
base-files: use shutdown instead of stop when the system goes down (patch by tripolar)
...
SVN-Revision: 24540
2010-12-13 08:01:21 +00:00
502d21dc2a
ramips: ramips_esw: add more definitions
...
SVN-Revision: 24340
2010-12-08 10:15:33 +00:00
bf58ef7c6d
ramips: ramips_esw: add helper function to set pvid
...
SVN-Revision: 24339
2010-12-08 10:15:28 +00:00
692d379b50
ramips: ramips_esw: add helper function to set vlan members
...
SVN-Revision: 24338
2010-12-08 10:15:25 +00:00
f7c3f91074
ramips: ramips_esw: add helper function to set VLAN id
...
SVN-Revision: 24337
2010-12-08 10:15:22 +00:00
0d2ad7a816
ramips: ramips_esw: introduce rt305x_esw_rmw{,_raw} function
...
SVN-Revision: 24336
2010-12-08 10:15:16 +00:00
7b878dde4b
ramips: ramips_esw: use rt305x_esw prefix in function names
...
SVN-Revision: 24335
2010-12-08 10:15:14 +00:00
0fcedc7bda
ramips: ramips_esw: coding style cleanup
...
SVN-Revision: 24334
2010-12-08 10:15:12 +00:00
48e6a31812
ramips: ramips_esw: add defines for switch register offsets
...
SVN-Revision: 24333
2010-12-08 10:15:07 +00:00
74c13f06df
ramips: ramips_esw: don't touch GPIO_PURPOSE register
...
It must have been set by the board initialization code.
SVN-Revision: 24332
2010-12-08 10:15:04 +00:00
3b9a6adc7d
ramips: ramips_esw: convert it to be a platform driver
...
SVN-Revision: 24331
2010-12-08 10:15:00 +00:00
889729df01
ramips: ramips_esw: move hardware initialization into a separate function
...
SVN-Revision: 24330
2010-12-08 10:14:58 +00:00
8957f39064
ramips: ramips_esw: use a private structure for the functions
...
SVN-Revision: 24329
2010-12-08 10:14:54 +00:00
0449d92dd7
ramips: add support for 2.6.36
...
SVN-Revision: 24270
2010-12-05 20:14:38 +00:00
01a5cb48c8
ramips: default profile fix
...
Fix package names in default profiles.
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 24269
2010-12-05 20:14:35 +00:00
47dd3b9fea
ramips: use tabs instead of spaces in mach-f5d8235-v2.c
...
SVN-Revision: 24268
2010-12-05 20:14:30 +00:00
21c8d63505
ramips: add support for Belkin F5D8235 v2 board
...
No support for usb for now.
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 24126
2010-11-24 10:01:23 +00:00
64b16b9f34
ramips: Use NET_IP_ALIGN instead of hardcoding 2
...
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
SVN-Revision: 24124
2010-11-24 10:01:18 +00:00
624cfc5c91
ramips: DMA map the correct RX skb size
...
The skb_reserve call prior to DMA mapping the RX skb reduced the skb
data len by 2. To not allow DMA to write behind the skb we should pass
the correct skb data len to the device.
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
SVN-Revision: 24123
2010-11-24 10:01:16 +00:00
f833e399f2
ramips: Don't trigger BUG_ON due to skb allocation failure
...
Instead just drop the rx'ed frame silently and reuse the already
available buffer.
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
SVN-Revision: 24122
2010-11-24 10:01:12 +00:00
c6e4124855
ramips: Remove unnecessary skb_put
...
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
SVN-Revision: 24121
2010-11-24 10:01:08 +00:00
69355ee10e
ramips: Allow ethernet interface to be taken down and up again
...
Taking the ramips ethernet interface down and up again resulted in the
driver not receiving any frames anymore. Fix this by correctly disabling
interrupts in the hw on ifdown.
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
SVN-Revision: 23243
2010-10-05 14:10:34 +00:00
5f9a6a5431
upgrade kernel versions to the latest stable ones
...
SVN-Revision: 23219
2010-10-04 10:40:41 +00:00
e5b081335e
ramips: Ralink RT305x, support for Prolink PWH2004 (Abocom5205)
...
The attached patch adds a preliminary support for Prolink PWH2004 board
(Ralink RT305x based). LAN and flash appear to work. However, the USB
port and WLAN I have not managed to activate properly yet, but that
problem appears to be present with other rt305x targets as well(?).
Signed-off-by: Esa Hyytia <esa at netlab.tkk.fi>
SVN-Revision: 23129
2010-09-27 14:43:34 +00:00
39c57eeb31
ramips: allow USB
...
The current defaults for ramips rt305x does not allow the USB
subsystem to be selected/built.
This patch is just a small step in that direction.
Signed-off-by: Luis Correia <luis.f.correia@gmail.com>
SVN-Revision: 23128
2010-09-27 14:42:07 +00:00
09e05d833d
kernel: update kernel version to 2.6.34.5
...
SVN-Revision: 22759
2010-08-22 13:26:06 +00:00
462dabc7f5
ramips: add support for Sparklan WCR-150GN board
...
This patch adds support for Sparklan WCR-150GN board.
Network configuration should be tweaked to make it work fully. The
reason it's not in this patch is that ramips target should be modified
to support different /etc/config/network files for different boards.
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 22658
2010-08-15 09:43:07 +00:00
781c091ea5
fix jffs2 64k and 128k images overwrite each other
...
When trying to build images with jffs2 filesystem for ramips platform
there is only one jffs2 image produced instead of two (64k and 128k).
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 22435
2010-07-31 11:42:17 +00:00
1ca67cba7f
ramips: enable ethernet driver for rt288x
...
SVN-Revision: 22214
2010-07-15 19:45:49 +00:00
2e45ce264d
ramips: register ethernet device on the RT-N15
...
SVN-Revision: 22213
2010-07-15 19:45:46 +00:00
c2ebadc504
ramips: add generic ethernet device for the RT288x
...
SVN-Revision: 22212
2010-07-15 19:45:43 +00:00
0d8c036e56
ramips: add mdio_cfg configuration for the ethernet driver
...
SVN-Revision: 22211
2010-07-15 19:45:40 +00:00
d14e9e706e
ramips: Fix bridging in ramips ethernet driver
...
Bridging between the ramips ethernet driver and rt2800pci was somewhat
broken. Frames received by the ethernet driver which were passed to the
wifi driver for transmission were sometimes corrupted or sent out with
huge delays.
The reason for this is the missing assignment of skb->tail in the ramips
ethernet driver's rx path resulting in skb->tail pointing to skb->data.
Since skb->tail is used by mac80211 it writes into skb->data which messes
up the frames content.
Fix this by using skb_put to correctly set skb->len and skb->tail.
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
SVN-Revision: 22172
2010-07-13 16:52:07 +00:00
27375c5139
ramips: protect GPIO register access with a spinlock
...
SVN-Revision: 22171
2010-07-13 16:52:04 +00:00
9ee8b1f8c6
ramips: sync kernel config
...
SVN-Revision: 22170
2010-07-13 16:52:02 +00:00
e2ce2feedb
kernel: update to kernel 2.6.34.1
...
SVN-Revision: 22118
2010-07-10 22:39:52 +00:00
cd2069a57c
fix commit r21994 (thanks juhosg)
...
SVN-Revision: 21995
2010-06-30 19:46:45 +00:00
0409c64e34
fix commit r21993
...
SVN-Revision: 21994
2010-06-30 19:35:12 +00:00
2dfcdb9465
generic: merge mips multi machine update to generic patches for 2.6.34
...
SVN-Revision: 21675
2010-06-04 19:09:52 +00:00
383bd396fa
generic: merge mips multi machine update to generic patches for 2.6.32
...
SVN-Revision: 21673
2010-06-04 19:09:46 +00:00
971b7ff50e
Fix ramips build when CONFIG_RALINK_DEV_GPIO_BUTTONS is not set.
...
Signed-off-by: Helmut Schaa
SVN-Revision: 21643
2010-05-31 11:57:32 +00:00
ba2b75f710
ramips: Added preinit scriptlet to set vars based on cpuinfo during preinit_main. This fixes a bug in which the vars were not set due to /proc not being mounted when ramips.sh was sourced
...
SVN-Revision: 21635
2010-05-30 03:21:00 +00:00
c24397b385
ramips: merge slab patch
...
SVN-Revision: 21607
2010-05-28 19:45:28 +00:00
7ac21ada55
ramips: use COMMAND_LINE_SIZE directly
...
SVN-Revision: 21606
2010-05-28 19:45:24 +00:00
178e4e9927
ramips: add missing 2.6.34 config files
...
SVN-Revision: 21605
2010-05-28 19:45:21 +00:00
b86455a7ec
ramips: refresh 2.6.34 patches
...
SVN-Revision: 21604
2010-05-28 19:45:16 +00:00
fdf1561386
ramips: sync 2.6.32 config
...
SVN-Revision: 21603
2010-05-28 19:45:10 +00:00
0ab7d18462
update to 2.6.34, signed of by russiane39, thx
...
SVN-Revision: 21573
2010-05-26 15:53:05 +00:00
b18a1d217b
kernel: update kernel to version 2.6.32.13 and 2.6.33.4
...
SVN-Revision: 21540
2010-05-23 13:16:51 +00:00
fdac9ae836
sync to kernel 2.6.32.12
...
SVN-Revision: 21195
2010-04-27 14:30:08 +00:00
37b02afe6a
package/kernel: use common gpio- & wdt- prefixes for GPIO and watchdog module names
...
SVN-Revision: 21137
2010-04-24 14:08:49 +00:00
60cbdbb686
ramips: use KEY_RESTART and KEY_WPS_BUTTON code for the appropriate buttons
...
SVN-Revision: 21083
2010-04-22 09:25:37 +00:00
3162bc1ecf
target/ramips: fix another typo from [20834] ( closes : #7182 )
...
SVN-Revision: 21012
2010-04-19 01:14:29 +00:00
e2b57ecf5f
define a shared IMG_PREFIX variable used as a basename for image files, it contains board & subtarget infos (if appropriate) allowing subtargets to share the same bin directory without overwriting each other's files
...
SVN-Revision: 20834
2010-04-12 23:15:56 +00:00
de18353622
ramips: nuke clocksource init patch
...
SVN-Revision: 20802
2010-04-11 17:47:30 +00:00
b4bb5ebfaa
ramips: generate sysupgrade images for the rt305x devices
...
SVN-Revision: 20801
2010-04-11 17:47:28 +00:00
7581054e93
ramips: add sysupgrade support
...
SVN-Revision: 20800
2010-04-11 17:47:25 +00:00
09aec474af
ramips: add diag support
...
SVN-Revision: 20799
2010-04-11 17:47:23 +00:00
2872bade69
ramips: enable image commandline hack and cmdline partition parsing
...
SVN-Revision: 20798
2010-04-11 17:47:20 +00:00
af05b16c98
ramips: add default profiles
...
SVN-Revision: 20797
2010-04-11 17:47:17 +00:00
0abc7e6d53
ramips: add wpad-mini to the default packages
...
SVN-Revision: 20632
2010-03-31 09:58:33 +00:00
a423c3abee
ramips: annotate device register function prototypes with __init
...
SVN-Revision: 20627
2010-03-31 08:40:28 +00:00
a9f313edea
ramips: register wifi device for the RT2880 based boards
...
SVN-Revision: 20625
2010-03-31 08:40:23 +00:00
9f3d673dbc
ramips: add wifi device for the RT2880 as well
...
SVN-Revision: 20624
2010-03-31 08:40:20 +00:00
1c25cfcde0
ramips: register wifi device on the rt305x based boards
...
SVN-Revision: 20616
2010-03-30 21:24:10 +00:00
John Crispin
Gabor Juhos
Vasilis Tsiligiannis
Jonas Gorski
Jo-Philipp Wich
Florian Fainelli
Hauke Mehrtens
Felix Fietkau
Imre Kaloz
Alexandros C. Couloumbis
Daniel Dickinson
Nicolas Thill