0622fdd82c
ramips: rt305x: remove superfluous controller_data assignment
...
SVN-Revision: 31919
2012-05-27 17:09:52 +00:00
7f5bec0642
ramips: make rt2x00 firmware extraction quiet
...
SVN-Revision: 31918
2012-05-27 17:09:50 +00:00
2ae5581447
kernel: update linux 3.3 to 3.3.7
...
SVN-Revision: 31848
2012-05-23 21:05:32 +00:00
e4720dfa95
ramips: Add byte queue limits support to net/ethernet/ramips_main.c
...
Add byte queue limits support to net/ethernet/ramips_main.c
"Byte queue limits are a mechanism to limit the size of the transmit
hardware queue on a NIC by number of bytes. The goal of these byte
limits is too reduce latency (HOL blocking) caused by excessive
queuing in hardware (aka buffer bloat) without sacrificing
throughput."
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
SVN-Revision: 31844
2012-05-23 21:05:23 +00:00
1d286fd755
ramips: Enable sysupgrade for Sitecom WL-351
...
Sysupgrade works just fine on my Sitecom WL-351 after adding this
oneliner.
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
SVN-Revision: 31843
2012-05-23 21:05:22 +00:00
39994008cb
linux: move certain disabled symbols to the generic configs
...
* CONFIG_ARCH_DMA_ADDR_T_64BIT
* CONFIG_ARCH_HAS_ILOG2_U32
* CONFIG_ARCH_HAS_ILOG2_U64
* CONFIG_ARCH_PHYS_ADDR_T_64BIT
* CONFIG_ARCH_SUPPORTS_MSI
* CONFIG_GENERIC_CPU_DEVICES
* CONFIG_HWMON_DEBUG_CHIP
* CONFIG_I2C_PXA_PCI
* CONFIG_LEDS_GPIO
* CONFIG_MINIX_FS_NATIVE_ENDIAN
* CONFIG_MLX4_CORE
* CONFIG_POWER_SUPPLY
* CONFIG_POWER_SUPPLY_DEBUG
* CONFIG_QUOTACTL
* CONFIG_SDIO_UART
* CONFIG_SENSORS_K10TEMP
* CONFIG_SENSORS_SCH56XX_COMMON
* CONFIG_SENSORS_VIA_CPUTEMP
* CONFIG_SERIO_AMBAKMI
* CONFIG_SERIO_I8042
* CONFIG_SERIO_LIBPS2
* CONFIG_SERIO_PCIPS2
* CONFIG_SERIO_RAW
* CONFIG_SERIO_SERPORT
* CONFIG_SPI_BITBANG
* CONFIG_SPI_GPIO
SVN-Revision: 31737
2012-05-15 10:58:52 +00:00
b472e5d12e
kernel: update linux 3.3 to 3.3.6
...
SVN-Revision: 31709
2012-05-14 09:18:32 +00:00
34018a630f
kernel: update linux 3.3 to 3.3.5
...
SVN-Revision: 31645
2012-05-07 20:11:43 +00:00
b0449ccf04
ramips: W306R V2.0 - GPIO and Network fixes
...
Fixed: GPIO typos and confirmed GPIO_BUTTON_RESET
Fixed: Lan & Wan reversed: swaped "eth0.2" with "eth0.1" by
removing a line(default is correct), and reversed the
Lan/wan layout LLLLW to WLLLL.
Added: image/Makefile now builds -factory.bin files. I am
unsure of the accepted way to change the makefile but
the name of the image needs to be 'linkn Kernel Image'
in order to be accepted by the OEM firmware.
Known issue: eth0 (internal switch i think has mac address:
00:11:22:33:44:55 but i think it should be same as
the lan).
Known issue: Pressing the reset button has no noticable effect,
i would expect the router to boot failsafe if being
pressed on boot, reboot if short press and reset all
to default if long press.
[juhosg: remove mtdlayout_W306R and use mtdlayout_4M instead]
Signed-off-by: David Pearce <david_18051985@hotmail.com>
SVN-Revision: 31557
2012-05-02 19:17:59 +00:00
90e99b9fe8
ramips: Make serial console for DIR-300-B1 work again
...
Make serial console for DIR-300-B1 work again.
With some recent change, "console=ttyS1,57600" was removed from the
default kernel command line, this adds the necessary mkcmdline
incantation to image/Makefile to add it there for this target.
This is quite likely broken for other targets as well.
Without this the console switches to ttyS0 instead of ttyS1 and
kernel output is missing, and the userspace comes up with 9600 baud
instead of 57600.
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
SVN-Revision: 31556
2012-05-02 19:17:58 +00:00
cbfce53831
kernel: update linux 3.3 to 3.3.4
...
SVN-Revision: 31541
2012-04-30 08:38:11 +00:00
8e06682fb7
ramips: rt305x: extract wifi eeprom and use the 8M template for the UR-336UN
...
Patch-by: Lebedev Dmitry <lebedev@trendnet.ru>
SVN-Revision: 31507
2012-04-29 07:36:33 +00:00
8fd383ae2e
kernel: update linux 3.3 to 3.3.3
...
SVN-Revision: 31460
2012-04-24 09:25:38 +00:00
1ab80c7817
ramips: rt305x: add support for the UR-336UN board
...
Patch-by: Lebedev Dmitry <lebedev@trendnet.ru>
SVN-Revision: 31451
2012-04-23 16:56:06 +00:00
3626444c6d
ramips: rt305x: add support for the Asus WL-330N3G board
...
This patch adds support for the ASUS WL-330N3G
Comparing to the WL-330N, It have 32MB ram, usb support and a bicolor led.
The bi-color led is driven by 2 gpio.
I don't know how to handle this, so I simply made 2 leds : one red, one blue.
But the red light takes precedence over the blue one according to the chart below.
r = led is red
b = led is blue
0 = led is off
xy= x->r for red, b for blue led, y->value of brightness in /sys/class/leds/x/brughtness
initial state action led gpio state
r0 b0 r0->r1 r r0 b0
r0 b0 b0->b1 b r0 b1
r1 b0 r1->r0 0 r0 b0
r1 b0 b0->b1 r r1 *b1*
r1 b1 r1->r0 b r0 b1
r1 b1 b1->b0 r r1 b0
r0 b1 r0->r1 r r1 *b1*
r0 b1 b1->b0 0 r0 r0
Signed-off-by: Frédéric Leroy <fredo@starox.org>
SVN-Revision: 31450
2012-04-23 16:56:05 +00:00
5024ffb976
ramips: nuke 3.2 suport
...
SVN-Revision: 31405
2012-04-21 12:30:53 +00:00
6c8ca78067
ramips: switch to 3.3.2
...
SVN-Revision: 31404
2012-04-21 12:30:51 +00:00
5c325b0057
ramips: add support for 3.3
...
SVN-Revision: 31403
2012-04-21 12:30:50 +00:00
7f902c962b
ramips: rt305x: add OHCI/EHCI registration code for RT3352
...
SVN-Revision: 31402
2012-04-21 12:30:48 +00:00
1645928135
ramips: rt305x: fix CPU clock detection on RT3352
...
SVN-Revision: 31401
2012-04-21 12:30:47 +00:00
fb69e28eaf
ramips: rt305x: use different memory size setup for RT3352
...
SVN-Revision: 31400
2012-04-21 12:30:45 +00:00
818aeba960
ramips: rt3883: add profile and build sysupgrade image for the RT-N56U
...
SVN-Revision: 31399
2012-04-21 12:30:44 +00:00
6b677e1d22
ramips: add swconfig to the default package list
...
SVN-Revision: 31398
2012-04-21 12:30:43 +00:00
ced031a0b2
ramips: build initramfs image for the Fonera 2.0N
...
SVN-Revision: 31397
2012-04-21 12:30:42 +00:00
fc88a363c0
ramips: rt305x: add initial support for Tenda W306R V2.0
...
More device info at: http://wiki.openwrt.org/toh/tenda/w306r
Signed-off-by: David Pearce <David_18051985@hotmail.com.au>
[juhosg: fix checkpatch errors, remove kmod-phy and luci-ssl packages
from the profile, change broken GPIO number]
SVN-Revision: 31396
2012-04-21 12:30:40 +00:00
88b5827c52
ramips: remove hardcoded console parameter from kernel configs
...
SVN-Revision: 31395
2012-04-21 12:30:30 +00:00
a8f2bc682e
kernel: also update the targets to use 3.2.15
...
Thanks Gabor for spotting it.
SVN-Revision: 31337
2012-04-17 13:12:14 +00:00
16b4cbcdd6
kernel: update linux 3.2 to 3.2.14
...
SVN-Revision: 31222
2012-04-09 14:48:51 +00:00
d87efd8c3c
kernel: update linux 3.2 to 3.2.13 and refresh patches
...
Also remove a duplicate patch from lantiq (already in generic).
SVN-Revision: 31158
2012-04-01 07:56:55 +00:00
e9c4d3d1f2
ramips: add support for the ARC FreeStation5 board, also fix WCR-150GN network setup while we're at it - thanks Pau Escrich <p4u@dabax.net> for the implementation
...
SVN-Revision: 31144
2012-03-29 16:03:04 +00:00
d495277d9f
ramips: rt305x: build image for the DIR-615 rev D boards
...
Patch from #10105 .
SVN-Revision: 31101
2012-03-27 19:29:59 +00:00
e4e24c5512
ramips: rt305x: add add support for the Asus WL-330N board
...
[juhosg: reorder several lines in order to keep things sorted
alphabetically]
Signed-off-by: Frédéric Leroy <fredo@starox.org>
SVN-Revision: 31100
2012-03-27 19:29:57 +00:00
c1dc6df8bd
kernel: update linux 3.2 to 3.2.12
...
SVN-Revision: 31028
2012-03-19 18:23:31 +00:00
18f7081e17
ramips: rt305x: add profile for the AZtech HW-5503G board
...
Patch from #11085 .
SVN-Revision: 30907
2012-03-12 17:29:06 +00:00
0f77d0b2ba
ramips: add RT3350 detection
...
SVN-Revision: 30900
2012-03-12 16:12:13 +00:00
05d3f559f5
ramips: rt305x: rewrite SoC detection
...
SVN-Revision: 30890
2012-03-11 19:05:59 +00:00
8cf8ee8f9d
ramips: rt305x: rename SYSTEM_CONFIG_* defines to RT305X_SYSCFG_*
...
SVN-Revision: 30889
2012-03-11 19:05:57 +00:00
acb4ad86e5
ramips: replace RALINK_SOC_* macros with global variables
...
SVN-Revision: 30888
2012-03-11 19:05:56 +00:00
8cff770eb3
ramips: introduce ramips_soc_prom_init and move SoC detection into that
...
SVN-Revision: 30887
2012-03-11 19:05:53 +00:00
6c51c47962
ramips: build initramfs image for DIR-{3,6}00 boards
...
SVN-Revision: 30882
2012-03-11 16:39:31 +00:00
4e15457e0e
ramips: allow to use DSP ASE on RT3xxx
...
SVN-Revision: 30879
2012-03-11 16:39:26 +00:00
0e486d2fd2
ramips: add support for unbranded XDX-RN502J board
...
This patch adds support for routers using a PCB marked XDX-RN502J
V2.0, such as some unbranded routers like this:
http://www.mediafire.com/?8acv87h6snn9fj6
http://www.mediafire.com/?do7xonw7scor4kn
http://www.mediafire.com/?1ad49zvx3e7jyix
http://www.mediafire.com/?i46cqiq66maa197
http://www.aliexpress.com/product-fm/516397994-Free-Shipping-300M-3G-WAN-Wireless-N-WiFi-USB-AP-Router-2-Antennas-wholesalers.html
some reports also state the Aceex 22Y uses the same board.
more information can be found in the following openwrt forum post
https://forum.openwrt.org/viewtopic.php?id=34878
[juhosg: fix checkpatch warnings, use the GENERIC_4M template]
Signed-off-by: bruno schwander <bruno@tinkerbox.org>
SVN-Revision: 30809
2012-03-04 16:09:13 +00:00
44c8b396f9
ramips: board support for Asus RT-N10+
...
[juhosg: fix indentation in platform scripts, and remove debug
messages from 06_set_iface_mac]
Signed-off-by: Patrick van Staveren <trick@vanstaveren.us>
SVN-Revision: 30808
2012-03-04 16:09:11 +00:00
9698a499b6
kernel: update linux 3.2 to 3.2.9
...
SVN-Revision: 30767
2012-03-01 19:49:02 +00:00
72599f0c61
ramips: don't read RAMIPS_RX_CALC_IDX0 register in the loop
...
SVN-Revision: 30733
2012-02-26 10:54:13 +00:00
100f76a010
ramips: raeth: add rx_info structure
...
This helps to reduce code size on RX path:
add/remove: 0/0 grow/shrink: 3/1 up/down: 68/-56 (12)
function old new delta
ramips_eth_open 1104 1144 +40
ramips_ring_free 212 232 +20
ramips_eth_stop 400 408 +8
ramips_eth_rx_hw 648 592 -56
SVN-Revision: 30732
2012-02-26 10:54:12 +00:00
32e7b1c7d9
ramips: raeth: add tx_info structure
...
This helps to reduce code size on TX path:
add/remove: 0/0 grow/shrink: 1/4 up/down: 56/-92 (-36)
function old new delta
ramips_eth_open 1048 1104 +56
ramips_eth_tx_housekeeping 156 148 -8
ramips_ring_free 224 212 -12
ramips_eth_stop 420 400 -20
ramips_eth_hard_start_xmit 480 428 -52
SVN-Revision: 30731
2012-02-26 10:54:10 +00:00
30143b715c
ramips: raeth: don't process disabled interrupts
...
Also rename the 'fe_int' variable.
SVN-Revision: 30713
2012-02-25 11:59:19 +00:00
6990f66861
ramips: fix FONERA20N image generation
...
SVN-Revision: 30710
2012-02-24 16:18:46 +00:00
9afeeae65e
ramips: image: increase minimum kernel partition size to 896k
...
SVN-Revision: 30706
2012-02-23 19:58:16 +00:00
7089b5213e
ramips: image: cleanup and sort templates/profiles
...
SVN-Revision: 30705
2012-02-23 19:58:15 +00:00
c8718a220b
ramips: image: use GENERIC_4M template for the ALL0256N board
...
SVN-Revision: 30704
2012-02-23 19:58:14 +00:00
507c7d30f5
ramips: image: introduce mkmtd/{,phys,spi} helpers
...
SVN-Revision: 30703
2012-02-23 19:58:12 +00:00
5f63ea18aa
ramips: image: pass mtdlayout variables by value
...
SVN-Revision: 30702
2012-02-23 19:58:11 +00:00
49e53c06b9
ramips: image: merge F5D8235V{1,2} templates
...
SVN-Revision: 30701
2012-02-23 19:58:10 +00:00
00e7277a4c
ramips: image: use generic template for the WR6202, OMNIEMB, W502U boards
...
SVN-Revision: 30700
2012-02-23 19:58:07 +00:00
554010d55b
ramips: image: introduce mkcmdline helper
...
SVN-Revision: 30699
2012-02-23 19:58:06 +00:00
32c6d63acf
ramips: image: use the GENERIC_4M template for the V11ST-FE board
...
SVN-Revision: 30698
2012-02-23 19:58:04 +00:00
ab65053cf0
ramips: image: simplify Makefile a bit
...
SVN-Revision: 30697
2012-02-23 19:58:03 +00:00
9017fce3a2
ramips: image: add MkImageLzma wrapper
...
SVN-Revision: 30696
2012-02-23 19:58:02 +00:00
c9d8f471fc
ramips: image: allow to build board specific initramfs images
...
SVN-Revision: 30695
2012-02-23 19:58:01 +00:00
c0974b46a5
ramips: merge identical switch configuration entries
...
SVN-Revision: 30688
2012-02-22 19:46:19 +00:00
a9101a144c
ramips: use unified switch identifiers in uci-defaults/network
...
SVN-Revision: 30687
2012-02-22 19:46:17 +00:00
b6522f372f
ramips: fix VLAN config of the RT-N15
...
SVN-Revision: 30686
2012-02-22 19:46:15 +00:00
a18a821733
ramips: raeth: show interrupt statistics in debugfs
...
SVN-Revision: 30681
2012-02-22 13:06:44 +00:00
214216c04d
ramips: raeth: add debugfs support
...
SVN-Revision: 30680
2012-02-22 13:06:42 +00:00
c1e4d709fa
ramips: raeth: rename main source file
...
SVN-Revision: 30679
2012-02-22 13:06:41 +00:00
5e6bc97d0c
ramips: raeth: add missing Kconfig and Makefile
...
SVN-Revision: 30671
2012-02-21 09:44:30 +00:00
3ba0f4e1ca
ramips: move the ethernet driver into a separate directory
...
Also clean up the Kconfig symbols.
SVN-Revision: 30670
2012-02-21 09:26:43 +00:00
a6d904b1d6
ramips: rename the spi driver
...
SVN-Revision: 30669
2012-02-21 09:26:41 +00:00
dd001a4b0f
ramips: rt3883: make rt3883_nand_data visible
...
SVN-Revision: 30655
2012-02-19 19:40:37 +00:00
62f213eab9
ramips: merge 3.2 fixes
...
SVN-Revision: 30652
2012-02-19 17:52:23 +00:00
18fdaee00b
ramips: nuke 2.6.39 support
...
SVN-Revision: 30651
2012-02-19 17:52:20 +00:00
e2ea72515f
ramips: rt305x: nuke built-in MTD partition maps
...
SVN-Revision: 30650
2012-02-19 17:52:15 +00:00
de6405c898
ramips: rt288x: nuke built-in MTD partition maps
...
SVN-Revision: 30649
2012-02-19 17:52:11 +00:00
e7f59b9326
ramips: build sysupgrade image for the V11ST-FE board
...
SVN-Revision: 30648
2012-02-19 17:52:08 +00:00
3489515a7e
ramips: rt305x: add support for the Skyline SL-R7205 Wireless 3G router
...
[juhosg:
- don't switch back to 2.6.39
- update config-3.2
- change machine id to SL-R7205
- reorder case entries in platform scripts
- remove button hotplug script]
Signed-off-by: Haipoh Teoh <hpteoh@ceedtec.com>
SVN-Revision: 30645
2012-02-19 16:44:49 +00:00
990ed96a2a
ralink: rt3883: disable the 2GHz band on the RT-N56U
...
SVN-Revision: 30632
2012-02-18 17:36:21 +00:00
5710530c41
ramips: rt3883: make rt3883_wlan_data visible
...
SVN-Revision: 30631
2012-02-18 17:36:16 +00:00
e17a3ffbbd
ramips: extract eeprom for the built-in wlan module on the RT-N56U
...
SVN-Revision: 30604
2012-02-16 20:06:22 +00:00
dabca24361
ramips: rt3883: change eeprom file name
...
SVN-Revision: 30603
2012-02-16 20:06:21 +00:00
00d963999d
ramips: select HW_HAS_PCI on per-board basis
...
SVN-Revision: 30576
2012-02-16 08:17:54 +00:00
fc967295ec
ramips: rt3883: remove a stray character from rt3883.h
...
SVN-Revision: 30575
2012-02-16 08:17:53 +00:00
b4af07d5c0
ramips: rt288x: don't register the PCI controller on each board
...
SVN-Revision: 30574
2012-02-16 08:17:52 +00:00
f8a56dc8df
ramips: raeth: separate ring allocation and setup
...
SVN-Revision: 30573
2012-02-16 08:17:50 +00:00
49fc54be3d
ramips: rt288x: fix PCI resource conflict
...
SVN-Revision: 30563
2012-02-15 21:19:02 +00:00
37f8c19028
correct PCI IO/Mem resource swapping
...
SVN-Revision: 30562
2012-02-15 21:13:21 +00:00
3ceebbba14
add Ralink V11ST-FE board support
...
This board is equipped with:
- 4MB of NOR Flash
- 32MB of SDRAM
- IC+ IP175C switch
- one Mini-PCI slot
SVN-Revision: 30561
2012-02-15 21:13:11 +00:00
8b8d9a8336
ramips: raeth: add a helper function for skb allocation
...
SVN-Revision: 30555
2012-02-15 18:33:42 +00:00
e57546de83
ramips: raeth: use netdev_alloc_skb
...
SVN-Revision: 30554
2012-02-15 18:33:41 +00:00
064855314b
ramips: raeth: add '__packed __aligned(4)' annotation to dma descritor structures
...
This helps GCC to generare more efficient code.
SVN-Revision: 30553
2012-02-15 18:33:40 +00:00
8c95385d78
ramips: raeth: use 're' instead of 'priv' everywhere
...
SVN-Revision: 30552
2012-02-15 18:33:38 +00:00
b3b79365f3
ramips: raeth: force link down in ramips_phy_stop
...
SVN-Revision: 30550
2012-02-15 13:47:52 +00:00
3e7b461431
ramips: raeth: serialize ramips_link_adjust calls
...
SVN-Revision: 30549
2012-02-15 13:47:50 +00:00
dcb13d4098
ramips: raeth: add PHYLIB support
...
SVN-Revision: 30547
2012-02-15 06:47:12 +00:00
02a01a16c7
ramips: extract eeprom for the PCIe wlan module on the RT-N56U
...
SVN-Revision: 30529
2012-02-14 17:32:45 +00:00
43d1a2c3ab
ramips: rt3883: enable PCI on the RT-N56U board
...
SVN-Revision: 30528
2012-02-14 17:32:44 +00:00
784be92e39
ramips: rt3883: add PCI support
...
SVN-Revision: 30527
2012-02-14 17:32:42 +00:00
10f00dc48b
ramips: rt3883: sync 2.6.39 config
...
SVN-Revision: 30526
2012-02-14 17:32:41 +00:00
ed79921fe5
ramips: use SoC specific irq.h
...
SVN-Revision: 30525
2012-02-14 17:32:40 +00:00
8d5dfa75e6
ramips: rt3883: update package list in the default profile
...
SVN-Revision: 30499
2012-02-13 15:18:05 +00:00
99c019fb0d
ramips: add preliminary support for the Asus RT-N56U board
...
SVN-Revision: 30498
2012-02-13 15:18:04 +00:00
97e641a0e6
ramips: raeth: enable MDIO code for RT3883
...
SVN-Revision: 30497
2012-02-13 15:18:03 +00:00
e532fa5fd4
ramips: add preliminary support for the RT3662/RT3883 SoCs
...
SVN-Revision: 30495
2012-02-13 15:17:59 +00:00
22ec8b4839
ramips: use GENERIC_{4,8}M image template for WR5123GN
...
SVN-Revision: 30483
2012-02-12 18:04:47 +00:00
b7f129e19b
ramips: rt305x: pass MTD partition map to the ALL0256N via cmdline
...
SVN-Revision: 30482
2012-02-12 18:04:46 +00:00
a287c60a61
ramips: add initial support for 3.2
...
SVN-Revision: 30476
2012-02-12 12:52:14 +00:00
388013b0ce
ramips: include 'linux/module.h' in the ramips_spi driver
...
SVN-Revision: 30475
2012-02-12 12:52:13 +00:00
faae4235c4
ramips: rt288x: remove per-board physmap_flash_data instances
...
SVN-Revision: 30474
2012-02-12 12:52:12 +00:00
3502e2b93f
ramips: rt305x: remove per-board physmap_flash_data instances
...
SVN-Revision: 30473
2012-02-12 12:52:10 +00:00
3a11dcdaa8
ramips: load gpio-polled keys module
...
SVN-Revision: 30463
2012-02-11 20:37:34 +00:00
323ece9474
ramips: remove yet another CONFIG_MTD_PARTITION ifdef
...
SVN-Revision: 30462
2012-02-11 19:37:11 +00:00
32b9e8c750
ramips: use gpio-keys-polled instead of gpio-buttons
...
SVN-Revision: 30461
2012-02-11 19:37:06 +00:00
80b40497de
ramips: add MIPS platform file
...
SVN-Revision: 30459
2012-02-11 18:16:11 +00:00
4e1b870f3e
ramips: add MDIO bus support for RT288X
...
SVN-Revision: 30455
2012-02-11 16:49:56 +00:00
34a9ccf544
ramips: fix Belkin F5D8235-v2 VLAN setup
...
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 30452
2012-02-11 15:31:18 +00:00
8916c02b47
ramips: raeth: make debugging messages configurable
...
SVN-Revision: 30450
2012-02-11 15:12:10 +00:00
aac3ad4c0e
ramips: raeth: use device pointer in DMA API calls
...
SVN-Revision: 30449
2012-02-11 15:12:08 +00:00
1fd8724e94
ramips: raeth: add netdev pointer to private structure
...
SVN-Revision: 30448
2012-02-11 15:12:06 +00:00
c6fa11d00f
ramips: raeth: cleanup DMA API usage in ramips_eth_hard_start_xmit
...
SVN-Revision: 30447
2012-02-11 15:12:05 +00:00
2d055f130e
ramips: raeth: unmap rx DMA address in ramips_cleanup_dma
...
SVN-Revision: 30446
2012-02-11 15:12:04 +00:00
7bd7ddcf4e
ramips: raeth: add rx_dma array to store the DMA address of the rx packets
...
SVN-Revision: 30445
2012-02-11 15:12:02 +00:00
647af823d9
ramips: raeth: use dma_addr_t for the descriptors
...
SVN-Revision: 30444
2012-02-11 15:12:01 +00:00
df5892d1f1
ramips: raeth: unmap DMA memory when a packet is received
...
SVN-Revision: 30443
2012-02-11 15:11:56 +00:00
617954ca5d
ramips: raeth: add a temporary pktlen variable
...
SVN-Revision: 30442
2012-02-11 15:11:55 +00:00
d1d492eaf9
ramips: raeth: protect macro parameters
...
SVN-Revision: 30441
2012-02-11 15:11:50 +00:00
8250692359
ramips: raeth: indicate dropped packets in stats
...
SVN-Revision: 30440
2012-02-11 15:11:49 +00:00
c67adbbddb
ramips: raeth: use the NUM_TX_DESC for the tx_skb array
...
SVN-Revision: 30439
2012-02-11 15:11:47 +00:00
a2c8789578
ramips: use uncached address in detect_mem_size
...
SVN-Revision: 30438
2012-02-11 15:11:45 +00:00
ba4c9b3a8f
ramips: rt305x: remove CONFIG_MTD_PARTITION ifdefery from machine files
...
SVN-Revision: 30437
2012-02-11 15:11:43 +00:00
f2dd67dc09
ramips: rt288x: remove CONFIG_MTD_PARTITION ifdefery from machine files
...
SVN-Revision: 30436
2012-02-11 15:11:41 +00:00
d6b9f88743
ramips: refresh patches
...
SVN-Revision: 30435
2012-02-11 15:11:40 +00:00
9cde29f1a7
ramips: rt305x: add support for Accton WR6202 / SMCWBR11S-3GN
...
This patch adds support for the Accton WR6202 Mini 3G broadband router.
Full details for this device are available at
http://www.awbnetworks.com/products03.php?Fullkey=19 .
This device is identical to the SMCWBR11S-3GN:
http://www.smc-asia.com/products03.php?Fullkey=210
It's also worth noting that this board has a GPIO line to control the
power to the USB port.
[juhosg:
- fix checkpatch warnings,
- reorder Kconfig entry,
- merge the sysupgrade patch,
- add GPL header]
Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com>
SVN-Revision: 30434
2012-02-11 15:11:36 +00:00
59b474732c
ramips: rt305x: merge duplicated mac address setup
...
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 30433
2012-02-11 15:11:34 +00:00
7298ef2456
ramips: rt305x: add profile for the Belkin f5d8235v2
...
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 30432
2012-02-11 15:11:32 +00:00
0430194cc3
ramips: fix compiler warning in prom.c
...
SVN-Revision: 30424
2012-02-10 17:38:46 +00:00
44ed690cb3
ramips: change vlan_config for the ALFA W502U board
...
This change moves the WAN port into a separate VLAN.
SVN-Revision: 29969
2012-01-31 18:34:10 +00:00
b3fdd931d1
ramips: add support for Sitecom WL-341v3 and other Sercomm IP1006RRv2 boards
...
This patch adds support for the Sitecom WL-341 v3 and other Sercomm
IP1006RRv2 based boards for sysupgrade support and for the initial
flash through pushbutton initiated recovery mode with the special
partition table and fixes for the quirks and things required by the
modified bootloader.
There is a known bug, Wi-Fi is not working on my board probably
because of the lack of RAM (the board only has 16MiB ram -- half of
the normal amount for non rebadged versions, but there is an empty
slot for another ram chip,) but I don't know for sure. The driver
loads but hostapd fails to load so I think it's not related to the
specific device except for the lack of RAM.
Moreover, only 7 of the 11 onboard leds are confirmed working, it
seems that one of the others is always on and the remaining ones are
connected to the wireless card leds already recognized by OpenWrt
[juhosg: reordered some parts in order to keep things sorted
alphabetically]
Signed-off-by: Marco Antonio Mauro <marcus90@gmail.com>
SVN-Revision: 29910
2012-01-26 10:44:23 +00:00
02e77c6ae1
ramips: generate sysupgrade image for the ALL0256N
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 29884
2012-01-24 11:48:48 +00:00
944c8aacdb
ramips: add user-space support for ALL0256N
...
This adds uci-defaults and sysupgrade support for the ALL0256N.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 29883
2012-01-24 11:48:47 +00:00
1932a7205c
ramips: add kernel support for ALL0256N
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 29882
2012-01-24 11:48:45 +00:00
9cf1d4e06e
ramips: scripts updates
...
In this patch:
* rename Argus leds to avoid underscores
* rename Belkin F5D8235 v1 leds from f5d8234 to f5d8235
* remove Belkin F5D8235 v1 status led defined as storage led (it was
defined as usb led earlier, just in wrong place) - it should have
router led as in v2
* add Argus, Sparklan and Belkin F5D8235 v2 status leds
* add Belkin F5D8235 v1 and v2 usb leds
* fix Belkin F5D8235 v2 network config generation and mac address axtraction
* fix Sparklan board identification
* add Sparklan usb led (this board doesn't have usb connector by
default and the led is hidden also but if you are going to solder
the connector then you'll see the led too)
* add Sparklan network config generation and mac address extraction
* fix empty string test in network script and...
* ...sort case entries by the first board in the list
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 29871
2012-01-23 10:23:32 +00:00
809fe38e41
ramips fix f5d8235-v1 diag LED support
...
SVN-Revision: 29857
2012-01-22 18:11:39 +00:00
e9d8deaaed
ramips: add sysled and sysupgrade to wr512-3gn
...
Patch from #10035 .
SVN-Revision: 29847
2012-01-22 13:43:23 +00:00
557cf076b4
ramips: sysupgrade for ESR-9753
...
This patch add sysupgrade for Engenius ESR-9753
Signed-off-by: Artur Wronowski <arteqw@gmail.com>
SVN-Revision: 29824
2012-01-20 10:49:26 +00:00
a2708d11e8
ramips: Rework ramips_eth to not require irqsave locking anymore
...
Previously the tx housekeeping was done in a spin_lock_irqsave critical
section which causes irqs to be disabled during that time. Since the
housekeeping is already prepared to be scheduled as a tasklet process
the housekeeping only in softirq context and revise the locking between
the tx path and the housekeeping tasklet by using a normal spin_lock
which in most situations will be a NOP anyway.
This makes sure that interrupts are only disabled for a short time
since in the worst case the housekeeping might have to free up to 256
skbs.
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
SVN-Revision: 29762
2012-01-17 11:23:11 +00:00
244c322d25
ramips: rt288x: add support for the Belkin F5D8235-4 v1 board
...
Patch-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
SVN-Revision: 29617
2011-12-28 08:43:43 +00:00
f50b02b559
ramips: rt288x: change base address and window size of flash bank 0
...
SVN-Revision: 29616
2011-12-28 08:43:36 +00:00
98437278c4
ramips: rt305x: add support for the ALFA Networks W502U (R36) board
...
SVN-Revision: 29615
2011-12-28 08:43:32 +00:00
723d8dd74f
ramips: rt288x: add support for the Buffalo WLI-TX4-AG300N board
...
SVN-Revision: 29612
2011-12-27 16:56:30 +00:00
7b1e525b56
ramips: initial support for Sitecom WL-351 v1 002
...
This add support for the Sitecom WL-351 v1 002.
In principle the Engenius ESR9850 should also work with this, but I
don't have the hardware to test it.
Since an external gigabit switch (RTL8366RB) is used,
I had to modify the ramips_esw driver to add a 'bypass' mode, which
just configures it to not filter the vlan tags.
Also two initialization words (FCT2 and FPA2) are set to different
values by u-boot than what the driver is using and it only seems to
work correctly when they not overridden by the driver, so I
added them to the platform specific data as reg_initval_fct2 and
reg_initval_fpa2.
With this wired lan works as expected, however I'm still having some
trouble with the wireless lan:
It only works after I rmmod & re-insmod rt2800pci and then
reconfigure it in the webinterface, but not directly after
rebooting.
The symptom of this is wpad saying:
Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: associated (aid 1)
Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> WPA: pairwise key handshake completed (RSN)
Dec 20 15:45:22 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: authenticated
But wpa_supplicant on the client saying:
Authentication with <wl351mac> timed out.
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
SVN-Revision: 29604
2011-12-23 14:27:16 +00:00
2cb946f5b4
ramips: add support for the Senao/EnGenius ESR-9753 board
...
Signed-off-by: Artur Wronowski <arteqw@gmail.com>
SVN-Revision: 29603
2011-12-23 14:27:10 +00:00
03bce34384
ramips: define firmware partition for Omnima MiniEMBWiFi
...
Patch-by: Ivan Ignjatic <ivan@omnima.co.uk>
SVN-Revision: 29602
2011-12-23 14:27:05 +00:00
0c38d36488
ramips: add support for Omnima MiniEMBWiFi board
...
This patch adds support for the Omnima MiniEMBWiFi
Ralink RT3050F based board.
Based on a patch by Ivan Ignjatic <ivan at omnima.co.uk>
SVN-Revision: 29533
2011-12-14 20:51:26 +00:00
43bd4c6ad1
ramips: fix mac addresses on the DIR-300/600 boards
...
SVN-Revision: 29471
2011-12-06 20:06:08 +00:00
5ef6ec4a31
ramips: set mac addresses for the NBG-419N
...
Based on a patch by Nerijus Baliunas <nerijus@users.sourceforge.net>
SVN-Revision: 29454
2011-12-05 17:27:07 +00:00
750d560767
ramips: set preinit interface mac on the hw550-3g board
...
Based on a patch by Daniel Golle <dgolle@allnet.de>
SVN-Revision: 29453
2011-12-05 17:27:06 +00:00
b5d7b359b2
ramips: use ramips_get_mac_* functions in the preinit script
...
SVN-Revision: 29452
2011-12-05 17:27:04 +00:00
4d5b940e66
ramips: move ramips_get_mac_* functions to lib/ramips.sh
...
SVN-Revision: 29451
2011-12-05 17:27:03 +00:00
cc853acb3a
ramips: add ramips_ prefix to get_mac_{binary,nvram} functions
...
SVN-Revision: 29450
2011-12-05 17:27:02 +00:00
b1137d48a4
ramips: fix network configuration setup
...
SVN-Revision: 29448
2011-12-05 16:54:48 +00:00
56c9b50006
ramips: fix argus board rootfs size
...
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 29422
2011-12-04 15:24:57 +00:00
3fccc3b376
ramips: enable sysupgrade on the RT-N15 board
...
SVN-Revision: 29393
2011-12-01 22:48:58 +00:00
4b2d1c3ad3
ramips: wrap long line in platform upgrade script
...
SVN-Revision: 29392
2011-12-01 22:48:57 +00:00
d622263588
ramips: add profile for the Asus RT-N15
...
This uses previously submitted rtl8366 kernel packages.
[juhosg: The kmod-gpio-dev package has been removed from the package list.]
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 29391
2011-12-01 22:48:55 +00:00
3a9e02fa41
ramips: setup default network configuration for RT-N15
...
Based on a patch by Roman Yeryomin <roman@advem.lv>
SVN-Revision: 29390
2011-12-01 22:48:54 +00:00
fc61c107f0
ramips: rt288x: add swconfig and rtl8366{s,_smi} drivers to the default profile
...
It is needed by the RT-N15 board.
SVN-Revision: 29389
2011-12-01 22:48:53 +00:00
80221fcd2a
ramips: remove default network configuration, and generate that from uci-defaults
...
SVN-Revision: 29387
2011-12-01 22:48:51 +00:00
4f6c58adac
ramips: use /lib/functions/uci-defaults.sh
...
SVN-Revision: 29386
2011-12-01 22:48:48 +00:00
569d8de6d6
ramips: simplify uci-defaults/network script
...
SVN-Revision: 29383
2011-12-01 22:48:45 +00:00
66c9a351dd
ramips: setup mac and network interfaces from separate functions
...
SVN-Revision: 29382
2011-12-01 22:48:43 +00:00
62d18e9f9a
ramips: fix Asus RT-N15 board support
...
Fix Asus RT-N15 flash partitions and make an image.
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 29381
2011-12-01 22:48:42 +00:00
2dd79d55c7
ramips: Sparklan wcr-150gn board fixes
...
* Fix partition sizes.
* Add buttons and leds.
* Register usb.
* Remove unnecessary stuff from image Makefile
* Fix rt2x00 eeprom extract.
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 29380
2011-12-01 22:48:41 +00:00
7c678e7511
ramips: fix package name of kmod-input-gpio-buttons
...
Based on a patch from Omnima Limited.
SVN-Revision: 29379
2011-12-01 22:48:39 +00:00
2ed38b24a8
ramips: move kmod-rt2800-pci to DEFAULT_PACKAGES
...
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 29378
2011-12-01 22:48:38 +00:00
295e04084c
ramips: setup bc2 mac addresses from the generic network script
...
SVN-Revision: 29377
2011-12-01 22:48:37 +00:00
02f95d4fb3
ramips: combine network setup for all boards in one file
...
Inspired by the patch from Roman Yeryomin. Thanks, Roman!
This removes unnecessary duplication and simplifies network setup for new
boards. It would be a one line change most likely.
[juhosg: setup lan and wan interfaces for unspecified rt3x0x based boards
in order to avoid regression]
Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
SVN-Revision: 29376
2011-12-01 22:48:35 +00:00
17ccd4aec4
rt305x: Create factory image for Fonera 2.0n
...
SVN-Revision: 28689
2011-10-31 09:23:44 +00:00
ee8077f0fe
ramips: Support for NexAira BC2
...
The preconfiguration of the USB LED has benn move to the
/etc/uci-defaults/leds script. [juhosg]
Signed-off-by: Adam Porter <porter.adam at gmail.com>
SVN-Revision: 28571
2011-10-24 21:49:36 +00:00
18452a753b
ramips: fix switch-port assignment for HW550-3G
...
WAN is on swtich port 0 for Aztech HW550-3G.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 28570
2011-10-24 21:49:32 +00:00
68a01c0180
ramips: combine led setup for all boards in one file
...
This removes unnecessary duplication and simplifies led setup for new
boards. It would be a one line change most likely.
Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
SVN-Revision: 28569
2011-10-24 21:49:31 +00:00
72e117ec79
ramips: rt305x: add support for the ZyXEL NBG-419N board
...
SVN-Revision: 28078
2011-08-22 20:41:49 +00:00
4b96d3af2a
ramips: rt305x: remove unused defines from mach-nw718.c
...
SVN-Revision: 28077
2011-08-22 20:41:48 +00:00
462ca22e9c
ramips: sort Makefile entries
...
SVN-Revision: 28076
2011-08-22 20:41:47 +00:00
d50494f3bb
ramips: sort RAMIPS_MACH_* defines
...
SVN-Revision: 28075
2011-08-22 20:41:45 +00:00
90686691ce
ramips: fix wireless firmware extraction for wr512-3gn
...
Signed-off-by: Andrew Andrianov <necromant@necromant.ath.cx>
SVN-Revision: 28073
2011-08-22 18:08:45 +00:00
f0049824b9
ramips: remove 'default [yn]' keywords from machine Kconfig entries
...
SVN-Revision: 28054
2011-08-19 15:55:12 +00:00
6720025497
ramips: rt305x: fix wr512n image generation
...
SVN-Revision: 28053
2011-08-19 15:55:11 +00:00
9085b05d9e
ramips: rt305x: support for wr512-3gn-like routers
...
Signed-off-by: Andrew Andrianov <necromant@necromant.ath.cx>
SVN-Revision: 28052
2011-08-19 15:55:10 +00:00
46b101ad0a
ramips: register usb on Belkin F5D8235 v2 and Argus ATP-52-B routers
...
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 28051
2011-08-19 15:55:08 +00:00
05209860da
ramips: fix wireless on Belkin F5D8235 v2
...
Fix wireless firmware extract from flash for Belkin F5D8235 v2.
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 28050
2011-08-19 15:55:07 +00:00
f8ab604eb6
ramips: fix typo in default packages
...
Fix fivebytepypo - there is no such kernel module wpad-mini :)
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 28049
2011-08-19 15:55:05 +00:00
09b1073f9b
kernel: update kernel to version 2.6.39.4
...
SVN-Revision: 28022
2011-08-16 22:04:10 +00:00
ace8ce0845
ramips: use maccalc instead of hexdump + sed
...
SVN-Revision: 28007
2011-08-15 19:00:23 +00:00
bfc47ffead
ramips: rt305x: fix mac addresses on the Netcore NW718 board
...
SVN-Revision: 28006
2011-08-15 18:55:53 +00:00
17c041cd0b
ramips: add maccalc to the default package list
...
SVN-Revision: 28005
2011-08-15 18:55:52 +00:00
67e480971c
ramips: add input drivers to the default package list
...
SVN-Revision: 28003
2011-08-15 18:55:50 +00:00
35ecf12059
ramips: rt305x: make config and factory partitions read-only on the ATP-52B
...
SVN-Revision: 28002
2011-08-15 18:55:48 +00:00
75e2360ab3
ramips: add uci-defaults scripts to preconfigure USB LEDs
...
SVN-Revision: 28000
2011-08-15 14:12:00 +00:00
e1b176de82
ramips: rt305x: add some USB modules to the default profile
...
SVN-Revision: 27999
2011-08-15 14:11:58 +00:00
Gabor Juhos
Jonas Gorski
Jo-Philipp Wich
Florian Fainelli
John Crispin
Vasilis Tsiligiannis
Hauke Mehrtens