e672dde6e2
Fix backup of PID controller.
2015-01-29 21:50:02 +01:00
c78bd800db
Fix MSP_GPS_SV_INFO comment
...
Depends on #437
2015-01-29 19:26:42 +01:00
e447739e74
Adjust documentation button so that it doesn't move the sensor
...
indicators when connected. Use same color as other help panels.
2015-01-29 19:01:37 +01:00
20a82e7339
Merge branch 'development' of https://github.com/pulsar256/cleanflight-configurator into pulsar256-development
2015-01-29 18:30:21 +01:00
e96839d3d8
Merge pull request #80 from ledvinap/feature-negative-current
...
Allow negative current draw
2015-01-29 18:29:01 +01:00
35200e5a36
Support changing PID controller in the GUI.
2015-01-29 18:27:50 +01:00
aaab850407
Change MSP_SONAR_ALTITUDE to be in the range used for cleanflight
...
original commands.
See
https://code.google.com/p/multiwii/source/browse/trunk/MultiWii_shared/Protocol.cpp#18
2015-01-29 15:29:12 +01:00
39c70ce9b8
Add sonar data storage
2015-01-28 22:28:19 +01:00
f933dbf330
Sonar altitude added to sensors
2015-01-28 22:24:44 +01:00
943d33ba4d
Allow negative current draw
...
Interpret MSP_ANALOG.amperage value as signed
2015-01-28 17:15:23 +01:00
d3fc8464fa
added a help button for the currently installed firmware
2015-01-28 00:01:42 +01:00
b3424eadcb
Defining the models and images used in one place to make maintainance of
...
the mixer list easier.
2015-01-27 21:06:39 +01:00
a56c0eef40
Fix welcome tab being cleared after failing to connect to a port.
2015-01-27 00:43:09 +01:00
34b7b87c3e
Allow old API version to be used but disable LED strip tab and
...
backup/restore functionality in certain cases. Cleanup of tab
switching.
2015-01-26 22:37:55 +01:00
342a5134a5
Merge branch 'feature-negative-currentsensors' of https://github.com/frog32/cleanflight-configurator into frog32-feature-negative-currentsensors
2015-01-26 19:01:01 +01:00
d269d60391
Improve user experience by adding tabs for the welcome and firmware
...
flasher.
The welcome (aka 'landing') and firmware flasher were already modelled
as tabs but were never displayed as tabs.
The UI didn't make sense when the whether the welcome message or
firmware flasher was displayed since there was no active tab or other
indication.
2015-01-25 17:37:47 +01:00
994b04b0aa
Add support for LED strip 'color' mode.
2015-01-25 16:22:57 +01:00
126beedf9c
Allow negative current scales and allow an offset between 0 and 3.3V
2015-01-23 12:01:52 +01:00
6a11e44802
Bump minimum API version up - needs latest firmware for LED strip/ring
...
compatibility.
2015-01-23 02:26:19 +01:00
a5de593da7
Allow LED strip colors to be used. Requires new firmware.
...
At the moment colors are only used by the thrust ring mode.
2015-01-23 02:12:20 +01:00
8c10f39606
Add support for backup and restore of led strip config.
...
Various minor code cleanups.
2015-01-19 20:41:41 +01:00
8870f9731d
Prepare for release 0.60.0.
2015-01-16 18:06:04 +00:00
f480e05027
Merge branch 'led-strip' into development
2015-01-16 17:24:13 +00:00
519de30f6e
Allow saving of LED Strip configuratiion via MSP. Requires firmware
...
with new MSP_SET_LED_STRIP_CONFIG.
Remove some .toUpperCase() duplication since it was only needed for the
CLI commands panel.
Minor CSS cleanups.
Some variable and class renaming to align with firmware code.
2015-01-16 00:15:41 +00:00
30ddc6ac83
replace motor order models with script generated varients
2015-01-10 19:17:23 +00:00
683e68b036
Add support for MSP_LED_STRIP_CONFIG.
2015-01-08 23:21:17 +00:00
c5e2a13b6c
First cut of port of LED Strip configuration UI.
...
Thanks for the original code decompyler!
2015-01-08 21:46:43 +00:00
6031907163
Merge branch 'development' of https://github.com/Roeland54/cleanflight-configurator into Roeland54-development
2015-01-08 01:37:19 +00:00
0285723fab
First cut of working configuration migration.
2015-01-07 20:15:22 +00:00
835e665017
Fix 'unknown code' messages in console log.
2015-01-07 20:15:21 +00:00
eda54f13db
Update RSSI channel configuration.
2015-01-07 13:51:08 +00:00
32a27b73a7
CLI available for old firmware versions
2015-01-06 20:35:58 +01:00
dfdb5cd99d
Prepare for 0.58.0 release.
2015-01-03 22:31:12 +00:00
d671bff583
First cut of functional 'Ports' tab. Support backup and restore of
...
serial port scenarios and baud rates. Add note to 'features' tab.
2015-01-03 00:58:52 +00:00
32820853ce
Updating to use API version 1.1.
2015-01-02 19:31:50 +00:00
a7dc838cdc
Removing review code.
2014-12-24 18:58:29 +00:00
aacbe4d76f
updating d3 and jquery libraries
2014-12-24 18:44:44 +00:00
6d24ce6b28
Re-instate support for A-Tail now that the firmware supports it.
2014-12-21 15:00:53 +00:00
502cf718ab
Update backup/restore functionality so that it restores adjustments,
...
auxiliary settings and channel forwarding (per-profile). Add "Warning
Cell Voltage" to the UI.
2014-12-21 12:29:36 +00:00
bf72712d2f
updating d3 and jquery libraries
2014-12-20 13:46:24 +01:00
7692b7354a
Update configuration for Cleanflight settings.
2014-12-20 02:50:36 +00:00
e8bd813fb8
Re-implement model diagram on motors tab.
...
See 79505e42ed
2014-12-20 00:29:49 +00:00
a8cf910f51
Merge remote-tracking branch 'multiwii/master'
...
Conflicts:
README.md
_locales/en/messages.json
changelog.html
js/backup_restore.js
js/data_storage.js
js/msp.js
js/protocols/stm32.js
js/serial_backend.js
main.css
main.html
main.js
manifest.json
tabs/auxiliary_configuration.css
tabs/default.css
tabs/firmware_flasher.js
tabs/initial_setup.css
tabs/initial_setup.html
tabs/initial_setup.js
tabs/modes.html
tabs/modes.js
tabs/motor_outputs.css
tabs/motors.html
tabs/receiver.css
tabs/servos.js
2014-12-18 22:40:03 +00:00
e86172b755
cleanup the documentation
2014-12-16 10:21:07 +01:00
9cf60224b2
Added Warning Cell Voltage
...
Added Warning Cell Voltage to Battery voltage in Configuration tab. When battery has deployed to level that is defined with warning cell voltage buzzer starts slow beeping and copter can still land safely. When min voltage is reached beeper start fast "screaming" and LIPO is empty (to point when it could be damaged from over discharging if using that default 3.3V).
2014-12-09 10:37:02 +02:00
9cebfb53f2
updating changelog/version/release
2014-12-06 15:40:38 +01:00
e87c0ca4ee
experimental bugfix for backup/restore failing under certain conditions
2014-12-05 10:24:20 +01:00
21e414f4b3
fix method name mismatch in serial layer
2014-12-05 10:23:53 +01:00
ebff37ae3f
fix review condition
2014-11-29 21:49:55 +01:00
8150bb7c07
swap the don't like url to point to the store support
2014-11-29 11:40:18 +01:00
19f2368bb9
return self through dialog handler function
2014-11-29 11:34:13 +01:00
4df1e9aafc
Merge pull request #66 from jaahaavi/master
...
Updated GPS settings
2014-11-29 10:15:19 +01:00
2eb6c0b691
stop the dialog from jumping vertically
2014-11-25 20:49:43 +01:00
b2cb677869
Updated GPS settings
...
- Added SBAS disabled (-1) to configuration tab
- Fixed GPS signal strength bars
2014-11-23 11:41:24 +02:00
fb1f22b248
fix internal pointers for window resize handler in review code
2014-11-22 08:28:56 +01:00
92f085f561
fix failed indentation in last commit
2014-11-22 06:54:25 +01:00
de87fab530
reworked serial layer (more verbose), added checks for chrome.runtime.lastError in connect and disconnect api calls
2014-11-22 06:31:46 +01:00
88abe0969d
EXPERIMENTAL delayed connect callback chain bugfix, this took months to track down
2014-11-21 13:50:02 +01:00
5e165b286b
implemented simple review mechanism
2014-11-21 08:40:43 +01:00
698aeb1bf9
correct callbacks in firmware flasher, optimize speed by updating UI between read/write operations
2014-11-15 13:44:12 +01:00
366cd018b2
whops, fixing trailing commas
2014-11-15 01:18:04 +01:00
7a0d3a1199
handle all sorts of edge cases that would otherwise break UI or functionality
2014-11-11 11:59:12 +01:00
f3020aed10
Bump release date.
2014-11-09 00:58:16 +00:00
902da2f91d
Add 'Adjustments' tab.
...
Cleanup 'Auxilary' tab code.
Rename other tabs to have shorter titles.
2014-11-09 00:46:12 +00:00
a31282c6a3
fix vbatmincellvoltage and vbatmaxcellvoltage scale factors inside output cruncher
2014-11-03 18:36:29 +01:00
9ee7670af7
add backupFileMinVersionAccepted in data storage, release
2014-10-31 11:27:15 +01:00
9974fbd68f
updating d3
2014-10-28 16:58:46 +01:00
a7e7552893
updating three.js to the latest version, adding separate folder to contain the library and required extension to support canvas renderer
2014-10-25 14:06:20 +02:00
36f447b4da
Make MSP_API_VERSION check non-mandatory for now.
2014-10-20 23:25:42 +01:00
be96da6098
reorder some of the cleanup routines, cleanup (experimental)
2014-10-19 16:17:44 +02:00
f387ea96ac
initialize connect_lock by default
2014-10-19 15:55:56 +02:00
0c2ec52bed
fix accidently removed buildinfo fetch on connect
2014-10-19 15:52:55 +02:00
2733f4832e
Retrieve and display MSP API Version from new MSP_API_VERSION command.
...
Requires latest firmware.
2014-10-18 16:58:49 +01:00
8477573be5
doubling initialization timeout inside port handler
2014-10-17 11:52:52 +02:00
f3968aaa70
Normalize all the line endings
2014-10-15 15:27:57 +01:00
b789884f91
Saving files before refreshing line endings
2014-10-15 15:26:49 +01:00
b03ae309fb
Update to match recenly renumbered MSP commands for cleanflight MSP commands.
2014-10-14 01:02:46 +01:00
428a00e651
Update AUX config UI to use new MSP commands for mode ranges.
2014-10-12 23:47:20 +01:00
9b1bc65384
Disabled backup/restore of old aux settings, backup of new mode ranges
...
still needs doing.
2014-10-12 23:44:45 +01:00
81a2872360
pulling main switch on compatibility (this should go live on November 1st 2014)
2014-10-12 18:35:32 +02:00
b35590f052
exprimental restore procedure
2014-10-12 18:00:44 +02:00
f30d886f79
use deep copy for all members
2014-10-12 16:55:49 +02:00
a67bbac54b
first set of bugfixes, store configurator version in the backup file
2014-10-12 16:16:47 +02:00
4f0ddfb5b2
highly experimental backup sequence (latest fw only), restore sequence disabled due to being outdated and incompatible
2014-10-12 16:06:48 +02:00
fa2888f463
normalize backup save date
2014-10-12 14:50:55 +02:00
e892cbdbad
Work in progress aux configuration ranges.
2014-10-11 23:10:20 +01:00
782cc916bd
store request buffer content inside callback object
2014-10-10 00:33:19 +02:00
27942f315a
updating d3 library to 3.4.12
2014-10-09 11:53:09 +02:00
c34938b9d6
serial.send won't depend on callback anymore
2014-10-08 11:15:02 +02:00
437fbe2cd0
cleanup eventPage, small optimizations and stricter rules for msp send callbacks
2014-10-07 17:40:52 +02:00
3d64b87578
add callbacks to backup and restore procedures, attach success messages in callbacks, hook up analytic events
2014-10-06 16:07:47 +02:00
cd4c7a8160
add SERVO_CONFIG to backup file, restoring old version will throw compatibility error
2014-10-06 15:24:34 +02:00
2c9fafe4b1
release
2014-10-06 00:07:28 +02:00
8fb24b3fa4
add callback to flashing protocols (no status yet)
2014-10-01 15:55:11 +02:00
3312bf5df2
fix timers
2014-10-01 15:18:37 +02:00
5cd042ae9d
remove active_tab_ref, name some of the anonymous functions, cleanup
2014-10-01 12:58:09 +02:00
01eac25bbc
updating changelog and releaseDate property
2014-09-29 20:48:28 +02:00
62e055f654
log buildInfo on connect
2014-09-25 12:02:53 +02:00
fe4240deb7
rssi_aux_channel support in receiver tab, hybrid box bugfixes
2014-09-24 16:01:23 +02:00
4719d1562d
implement build info
2014-09-24 15:35:20 +02:00
c24b8fb482
MSP_BUILDINFO placeholder code
2014-09-24 15:19:22 +02:00
16a68557c3
add multiwiicurrentoutput and rssi_aux_channel to data storage and msp read/write
2014-09-24 15:09:09 +02:00
177498bd20
catch some runtime errors in current context
2014-09-22 21:16:52 +02:00
6d44499f99
handle impossible default state since that's what we do now
2014-09-21 20:40:33 +02:00
a0ed27c161
reorganization of several MSP methods, small optimizations
2014-09-21 20:31:57 +02:00
4412f9c263
default and initial setup renamed to landing and setup, including object adjustments
2014-09-20 13:51:23 +02:00
741961cce4
new connect message informing about missing capability
2014-09-19 18:21:01 +02:00
5d9b28c5c7
add MSP_SET_RCMAP to cruncher
2014-09-19 16:11:26 +02:00
0c175725b1
support for currentscale and currentoffset, ui fully working both read and write
2014-09-18 13:21:48 +02:00
800bfd59c8
support for multiwiicurrentoutput
2014-09-18 12:24:38 +02:00
ba046031ed
add midthrottle (midRc) as requested, placeholder multiwiicurrentoutput variable
2014-09-17 20:13:13 +02:00
fee5219a73
move index to ascii conversion for rcmap out of msp protocol, define feature index array (will get a proper text polish in the future)
...
updating mixer select with missing names
2014-09-17 11:23:31 +02:00
e9c4a533af
finishing touches to the crunching mechanism, backup and restore is all cleaned up now
2014-09-17 09:27:54 +02:00
e626fbeb7b
utilizing the new data cruncher in various tabs (aux, pid, receiver) and in restore routines, unfinished (looking solid)
2014-09-16 23:07:52 +02:00
bfb6e17187
removing obsolete code
2014-09-16 21:17:53 +02:00
0649a59b13
function returning specific byte from 32 bit variables (untested)
2014-09-16 19:26:06 +02:00
8a951acb82
new generic crunching mechanism that will be used with all of the future set messages
2014-09-16 19:24:10 +02:00
c37b9ff0f1
merging MISCv2 into MISC since its both data structure and old fw/new fw compatible
2014-09-16 15:43:04 +02:00
7e8b1781da
add RC_MAP, BF_CONFIG for storing new info that is now available, working channelLetter mapping, unfinished MISCv2
2014-09-16 14:48:36 +02:00
97d3a24787
update msp layer with new transmission codes, add transparent methods to handle the incoming data (temporary)
2014-09-16 13:36:10 +02:00
066c355170
Remove baseflight references from filenames.
2014-09-14 13:46:30 +01:00
e20806c7a8
only fire recovery routine once if bus is not recoverable
2014-09-14 14:08:28 +02:00
25edf3a4bf
improving the async transmission part in serial layer
2014-09-13 15:01:32 +02:00
4b96bb39b5
updating analytics lib
2014-09-13 12:17:22 +02:00
46b3151e37
initial cleanup on the lowest level of serial layer, "system_error" bug is still unknown
2014-09-09 13:55:58 +02:00
a96e804359
removing MSP pass through mode
2014-09-08 17:52:07 +02:00
36bce25ba8
add three.js to libraries
2014-09-05 22:45:08 +02:00
79505e42ed
Show model diagram on motors tab.
...
When testing motors it's more useful to have it present on the motors
tab so you don't have to keep cross-referencing the initial setup tab.
2014-09-04 02:59:31 +01:00
bf13a11dc2
Merge remote-tracking branch 'multiwii/master'
...
Conflicts:
_locales/en/messages.json
changelog.html
js/data_storage.js
js/protocols/stm32.js
manifest.json
tabs/auxiliary_configuration.js
tabs/default.css
tabs/default.html
tabs/firmware_flasher.js
tabs/servos.js
2014-09-04 01:40:24 +01:00
0bd4af89c9
catch lastError cleanly in current context
2014-09-01 14:56:13 +02:00
893671fa2b
check if result exists before comparison
2014-09-01 14:46:46 +02:00
9034a94135
release
2014-08-31 16:52:55 +02:00
b5aeb8df2a
fix typo
2014-08-31 15:55:12 +02:00
37de8dfefa
new simplified flasher status UI
2014-08-30 10:30:28 +02:00
322af92d45
add / implement flash slowly option in firmware flasher
...
this will allow flashing via serial adapters that doesn't support 921600
flashing via various bluetooth adapters will be also possible now
(untested)
2014-08-30 08:59:21 +02:00
6dec7dfbc1
if unexpected data is received, throw an error instead of log, this will also attach a stack trace for easier debugging
2014-08-30 08:35:09 +02:00
37746bf3ed
fix rare condition in which flasher could hang and wont let the user leave
2014-08-30 08:27:24 +02:00
1e681bbdd2
polish variable definitions (only indentation changes)
2014-08-30 08:26:12 +02:00
a710a2fbb1
release
2014-08-24 23:39:20 +01:00
90da15b14c
added time based update reminder (informing people on dev branch and ones with broken chrome auto-update mechanism)
2014-08-24 23:39:19 +01:00
b337359389
fix style
2014-08-24 23:38:43 +01:00
d4f4d619cf
another run on undefined comparators
2014-08-24 23:38:42 +01:00
8dabc3ac91
experimenting with some undefined comparators in strict mode
2014-08-24 23:38:42 +01:00
f1df9ade05
updating analytics
2014-08-24 23:38:42 +01:00
b947bd1188
dumb down port handler implementation
2014-08-24 23:38:42 +01:00
179a3aa643
polish
2014-08-24 23:38:42 +01:00
b77ed6b174
another refactor for global variables, bugfixes for logging tab initialization in strict mode
2014-08-24 23:37:07 +01:00
f3ea5757f7
lots of work on removing global variables
2014-08-24 23:37:07 +01:00
1e0cadc039
recovery bugfix
2014-08-24 23:37:07 +01:00
696e27b503
updating d3 library
2014-08-24 23:37:07 +01:00
a893261e6d
more strict
2014-08-24 23:36:17 +01:00
b78395d639
corrections of inline functions
2014-08-24 23:36:17 +01:00
d9c315338d
turning on strict mode for various js files
2014-08-24 23:36:17 +01:00
6a58fee7c4
stm32/stm32usbdfu parameters rework, removing UI options dependency
2014-08-24 23:32:05 +01:00
078d5b4ad6
move flashing protocols to separate folder
2014-08-24 23:32:05 +01:00
3a7654b433
since erasing only needed pages appears to be working correctly, removing it from experimental
2014-08-24 23:32:04 +01:00
a3995a4694
lower the "contacting bootloader" timeout from buggy 4s to 1s
2014-08-24 23:32:04 +01:00
440d3250f1
release
2014-08-18 19:29:36 +02:00
2a3d261465
added time based update reminder (informing people on dev branch and ones with broken chrome auto-update mechanism)
2014-08-17 13:29:07 +02:00
cc8e53205d
fix style
2014-08-14 17:00:32 +02:00
dbf528345e
another run on undefined comparators
2014-08-14 16:41:49 +02:00
d3d933a704
experimenting with some undefined comparators in strict mode
2014-08-14 16:23:08 +02:00
6138c06fa4
updating analytics
2014-08-14 15:49:26 +02:00
4bd113f28f
dumb down port handler implementation
2014-08-13 13:29:55 +02:00
d36d0af270
polish
2014-08-13 13:12:39 +02:00
e27a194ec7
another refactor for global variables, bugfixes for logging tab initialization in strict mode
2014-08-12 15:51:31 +02:00
ec44b77ff2
lots of work on removing global variables
2014-08-10 06:01:44 +02:00
377853b58a
recovery bugfix
2014-08-10 06:01:21 +02:00
42e25fbb02
updating d3 library
2014-08-09 20:59:15 +02:00
fc0fff017e
more strict
2014-08-09 20:47:07 +02:00
f16b3a479a
corrections of inline functions
2014-08-09 20:40:40 +02:00
36f456d2e7
turning on strict mode for various js files
2014-08-09 19:38:46 +02:00
13d17e1528
stm32/stm32usbdfu parameters rework, removing UI options dependency
2014-07-22 14:16:09 +02:00
93ab8dfba3
move flashing protocols to separate folder
2014-07-22 13:20:26 +02:00
8d67811644
since erasing only needed pages appears to be working correctly, removing it from experimental
2014-07-21 07:21:03 +02:00
b47892eca1
lower the "contacting bootloader" timeout from buggy 4s to 1s
2014-07-21 03:48:35 +02:00
1688b41eb2
Merge remote-tracking branch 'multiwii/master'
...
Conflicts:
changelog.html
main.js
2014-07-20 01:01:25 +01:00
04960012ca
tiny method re-order in serial layer
2014-07-16 14:06:15 +02:00
85bee11712
use analytics exception API to handle/report serial related issues
2014-07-16 13:07:24 +02:00
1885fba5a0
analytics overhaul
2014-07-16 12:59:12 +02:00
8a52551671
request and store MSP_BOXIDS (for reasons unknown at the moment)
2014-07-11 17:52:56 +02:00
930a7f482f
updating libs
2014-07-11 13:26:46 +02:00
75e0accf75
hookup new cleanup system
2014-07-10 18:45:18 +02:00
5efb1685a4
moving default tab to new tabs object
2014-07-10 18:14:17 +02:00
7e67cccf96
adding new tabs object (will contain all tab methods in the future)
2014-07-10 18:13:38 +02:00
aca493301a
simplify some interval cleaning code
2014-07-10 14:48:33 +02:00
3f063f6654
initial stab on preventing tab switch chaining
2014-07-09 16:10:02 +02:00
795502a585
enforce stronger interval cleanup
2014-07-09 15:46:35 +02:00
58f933e92c
Merge remote-tracking branch 'multiwii/master'
...
Conflicts:
_locales/en/messages.json
tabs/auxiliary_configuration.html
tabs/auxiliary_configuration.js
tabs/receiver.css
2014-07-07 19:45:33 +01:00
9c6fdf81c8
Update servos tab to support cleanflight's cleaner implementation of
...
channel forwarding which doesn't re-use 'middle'
This essentially removes the legacy multiwii hack support.
2014-07-06 12:26:41 +01:00
785109e9e2
cleanup all timeouts on disconnect, fixes hanging CLI cleanup on hot-disconnect
2014-07-02 13:55:35 +02:00
a7975883ee
use GUI status instead of UI status
2014-07-02 13:54:48 +02:00
343cb15e61
another experimental fix for serial "system_error"
2014-07-01 12:48:20 +02:00
0baad91237
track bus recovery so it wouldn't fall into infinite loop, experimental fix
2014-07-01 04:13:33 +02:00
f269c8a8b4
serial error events hookup
2014-06-30 02:37:29 +02:00
05dfaf910d
sprinkle in some tracking events for firmware flashing
2014-06-28 21:38:06 +02:00
959edc85e7
onReceiverError handle implementation
2014-06-28 14:25:11 +02:00
e37da07bc8
interval timers bugfixes
2014-06-27 18:19:53 +02:00
f352c4edbe
kill motors on sudden application close
...
#34
2014-06-27 17:31:12 +02:00
f2aa899fe0
polishing firmware flasher UI and messages
2014-06-24 14:57:41 +02:00
86aa6a282c
dangerous things that people want...
2014-06-23 19:50:39 +02:00
bf1c58f1bd
cleanup
2014-06-20 14:42:20 +02:00
61bed4770f
cosmetic change
2014-06-20 14:29:16 +02:00
8273081fdd
moving kinematics data to array
2014-06-20 12:39:42 +02:00
cb5bcf9c0a
initial work on pass through mode for ReadError
2014-06-20 11:07:43 +02:00
f649418fdf
moving CLI vars around
2014-06-20 10:29:01 +02:00
0a2947b1ab
sort out usb api errors in canary
2014-06-16 22:00:08 +02:00
f70b6f64ff
add i2c error counter in status bar
2014-06-16 14:13:30 +02:00
22cc8f0b96
move one comment over to correct block
2014-06-13 21:45:36 +02:00
99c5906a4b
now that's a proper cleanup
2014-06-10 00:19:42 +02:00
c0387850aa
jump to application code routine cleaned up
2014-06-10 00:09:15 +02:00
1fb060e0fa
remove obsolete chunk of code
2014-06-10 00:04:30 +02:00
7d3a29c0b7
clearStatus and loadAddress now return data
2014-06-09 23:49:08 +02:00
e8fa4e1822
documentation and major cleanup for DFU_DNLOAD
2014-06-09 23:29:36 +02:00
623c049b5e
ugly fix for outstanding call error
2014-06-09 17:55:21 +02:00
7bdd43fd1c
make the validation pass on hexes with holes
2014-06-09 17:47:41 +02:00
be9cd9f606
implemented jump into app code
2014-06-09 13:16:58 +02:00
dce248e404
working verify (address jumps not tested)
2014-06-09 13:01:18 +02:00
4425dfb5c3
split write into load address and write routines
2014-06-09 12:46:41 +02:00
4fdbb8468b
working flashing, broken verify
2014-06-08 23:44:06 +02:00
176566f72e
add missing ;
2014-06-08 22:38:58 +02:00
3e30482076
working full chip erase
2014-06-08 22:06:01 +02:00
21b0f447b6
initial work on full erase
2014-06-08 21:33:42 +02:00
12364ec087
implementing first 2 upload procedure methods
2014-06-08 21:15:12 +02:00
92f9b40fc0
implementing openDevice and claimInterface
2014-06-08 20:26:28 +02:00
b5a1015610
DFU detection and port UI DFU option injection
2014-06-08 20:10:07 +02:00
a0582fd79f
adding request usb permissions UI (DEV only)
2014-06-08 19:32:24 +02:00
cda43ac9bf
add additional permissions so we can use USB api
2014-06-08 18:42:31 +02:00
8231c60b3c
initial implementation of control transfer in/out
2014-06-08 17:42:02 +02:00
c4e1cf2600
initial (header) work on STM32DFU
2014-06-08 17:16:44 +02:00
b09620b6ae
remove obsolete needle, cleanup
2014-06-07 17:54:51 +02:00
7e62e98bac
Support AUX1-8 on the 'Auxiliary Configuration' tab.
2014-06-04 19:33:24 +01:00
5abe7473f8
moving send_message routine to MSP object
2014-06-01 14:10:18 +02:00
46cf844e7e
display current draw in A not mA
2014-05-30 01:41:27 +02:00
d68bd29191
initial support for current sensor code from Lux
2014-05-29 20:16:32 +02:00
f7f48c48b4
updating d3
2014-05-19 23:44:47 +02:00
ce0600b940
keep speed indicators on 0 while disconnected
2014-05-15 13:47:05 +02:00
5f07390d45
stuff rcData to array (allocating up to 32 chan)
2014-05-15 13:12:13 +02:00
4edc9771de
dropping in jquery 2.1.1
2014-05-08 15:05:21 +02:00
20e2995fb4
localization can now replace placeholder attr
2014-05-08 11:15:20 +02:00
aaacf6cea8
support global and local chip erase
2014-05-07 08:07:49 +02:00
af15110fa6
handle holes in hex gracefully
2014-05-07 07:55:51 +02:00
eb92009bcb
experimental local erase, needs testing
2014-05-07 05:01:08 +02:00
6a33801463
default tab moved to i18n
2014-05-06 16:45:26 +02:00
245328272c
serial backend now support i18n
2014-05-06 16:30:53 +02:00
e1ceee4fa4
started moving messages to translation system
2014-05-06 16:19:30 +02:00
7e82e96114
add support for MSP_PIDNAMES
2014-05-03 22:42:11 +02:00
854a17e0f2
preparing some stuff for dongs
2014-05-03 01:03:24 +02:00
a6fcdbdecf
updating d3
2014-05-02 17:20:54 +02:00
de26bdb0d0
Use d3 to render the sensors tab
2014-04-13 11:54:35 +02:00
Dominic Clifton
tracernz
Krzysztof Rosinski
Petr Ledvina
Paul Rogalinski
Marc Egli
Jonathan Hudson
Roeland Lutters
cTn
jaahaavi
Tobias Raeder