Commit Graph

206 Commits (f1b7de863d1b26361784b6c0f02bef3900b1239d)

Author SHA1 Message Date
John Crispin 89329096df ramips: add support for Tenda 3G150B
Add suport for Tenda 3G150B:
- cpu: Ralink RT5350F
- flash: 4MB
- ram: 32MB
- 1x USB 2.0
- 1x RJ45
- one reset button
- battery powered (BP-4L, 3.7V 1450mAh)

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44073 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-01-22 09:35:22 +00:00
John Crispin 9286ab00d3 ralink: add support for firewrt
this is a mt7621 based board

Signed-off-by: wengbj <linux.c@foxmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44055 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-01-20 06:34:28 +00:00
Felix Fietkau fb2649fbfe ramips: add missing copyright info for relocate stub
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44017 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-01-17 21:22:36 +00:00
Felix Fietkau 83a567357d ramips: add preliminary support for DIR-860L B1
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44016 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-01-17 21:20:05 +00:00
Felix Fietkau 506958b6f3 ramips: add code for relocating a kernel to the right place
(used if the boot loader wants a different loadaddr/entry)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44014 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-01-17 21:19:38 +00:00
John Crispin 75b65571c9 ramips: add support for Intenso Memory 2 Move USB 3.0
This adds support for a rt5350-based "portable nas" solution
from Intenso. The board comes with 32M RAM and 8M Flash, the
built-in HDD is connected/accessible via a usb3.0<->sata
bridge VLI VL701.

The device has 1 Ethernet port (100M/10M), 1 micro b usb 3.0
socket (for charging the battery, or accessing the hdd directly).
Wireless connectivity is provided by the rt5350 SoC [i.e.:
802.11n 1x1 2.4 GHz with a pcb antenna.]

Serial, leds, wifi, ethernet and usb are tested and
as far as I can tell: they are working fine (tm).

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44001 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-01-17 14:06:13 +00:00
John Crispin e5244ce230 ralink: add support for Kingston MLWG2
This patch adds support for the Kingston Mobilelite Wireless G2 (MLWG2)

http://wiki.openwrt.org/toh/kingston/mlwg2

https://github.com/gmacario/kingston-mlwg2-hack/wiki/Testing-OpenWrt-on-MLWG2

Tested-by: Gianpaolo Macario <gmacario@gmail.com>

Signed-off-by: L. D. Pinney <ldpinney@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43990 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-01-17 07:07:36 +00:00
Felix Fietkau 6ee18aa54e ramips: convert mt7621 images to new image building code
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43908 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-01-10 15:26:53 +00:00
Felix Fietkau 49c1bb9796 ramips: simplify mkimage kernel loadaddr/entry handling
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43906 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-01-10 15:26:38 +00:00
Felix Fietkau 60a5ab1efe ramips: add preliminary Archer C20i support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43898 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-01-09 15:40:51 +00:00
Felix Fietkau 53b2d32f07 ramips: fix WSR-600 image format
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43814 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-01-02 21:53:45 +00:00
Felix Fietkau e2a4349bbf ramips: fix image format for WSR-1166
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43812 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-01-02 21:53:31 +00:00
John Crispin 14147dd72b ramips:Add support for Aigale Ai-BR100
Aigale Ai-BR100 is a router with mt7620a soc.
There are only 2 lights on the board (WAN and WLAN) so I used the wlan light as the status led.

Signed-off-by: 郭传鈜 <gch981213@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43681 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-12-13 08:07:03 +00:00
John Crispin f374eae83c ramips: generate factory images for Nexx devices
Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43541 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-12-07 16:53:22 +00:00
John Crispin b598129396 ralink: merge the mt7620a/n subtargets
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43300 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-11-19 09:19:38 +00:00
John Crispin 812305fe4f ralink: add support for WSR-600/1166
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43244 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-11-14 16:52:36 +00:00
Felix Fietkau 77754f4ca4 ramips: fix initramfs image build handling
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43219 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-11-08 15:40:17 +00:00
John Crispin 3d1fb84ada ralink: add support for mt7628
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43197 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-11-06 09:31:31 +00:00
Imre Kaloz dd922e5403 [ramips]: add support for the Linksys E1700
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43186 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-11-05 14:37:13 +00:00
John Crispin 305ac83fa3 ramips: add support for Airlink101 AR670W
This is a RT2880-based board, 32MB RAM, 4MB flash. The bootloader
is a hacked u-Boot that reads an LZMA image directly, so we skip
generating the uImage header and enable the lzma mtdsplit parser.

Signed-off-by: Claudio Leite <leitec@staticky.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43153 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-11-03 08:00:13 +00:00
John Crispin 1968a036e6 ramips: add support for A5-V11 board (resubmit)
(Reposted due to an issue with the patchwork server during original submission)

Unbranded. Silkscreen on PCB is “A5-V11”, believed to be made by Bococom (or at least uses Bococom image encryption - as used on poray devices - but different key)

Signed-off-by: Gareth Bryan <gareth@mx9.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43102 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-10-29 11:01:17 +00:00
John Crispin e3518558b8 ramips: fix filenames in PorayDualSize factory images
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43073 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-10-26 17:18:45 +00:00
John Crispin 96ea58bf32 ramips: add comments for image/Makefile.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42991 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-10-20 06:29:51 +00:00
John Crispin 4cd9d06c9c firmware-utils: restore compilation of mkhilinkfw.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42989 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-10-20 06:29:38 +00:00
John Crispin 12fd40cbfd ramips: add support for Nexx WT3020 devices
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42983 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-10-20 06:28:48 +00:00
John Crispin ab41ed7d55 ralink: Build 8M image for 7Links PX-4885
7Links PX-4885 (clones) can also be purchased with 8MB flash.
Creating images for these routers, use dtsi for common part

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42892 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-10-13 19:41:36 +00:00
John Crispin 784895b84e ramips: add support for Nexx WT1520
Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42867 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-10-10 08:56:43 +00:00
John Crispin 5f9a01b40f ramips: Support for RAMIPS based Tripmate HT-TM02 board
Provides support for the Tripmate HT-TM02 personal router including LEDs and
reset button. “Mode” switch is not supported. New profile includes full set
of packages required to enable LEDs, USB, and LUCI. Patches were applied
against trunk snapshot r42649. Functionality has been tested in AP, basic wifi
client, wifi router, and routed client modes - all good.

Signed-off-by: Ron Curry <wingspinner@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42785 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-10-06 04:52:07 +00:00
John Crispin 3d2aca3002 ramips: Add support for Omnima MiniPlug
This patch adds support for the Omnima MiniPlug RT5350 based board, 8MB SPI flash

Signed-off-by: Ivan Ignjatic<ivan@omnima.co.uk>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42200 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-08-18 16:06:48 +00:00
John Crispin b8834bbbcd ramips: add mpr-a1 to default profile
Add hame mpr-a1 to default ramips profile.

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42191 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-08-18 13:09:43 +00:00
John Crispin 9c07fe9383 firmware-utils: made mkdir615h1 work for all Senao-produced devices as mksenaofw and cleaned up some of its formatting
Signed-off-by: Forest Crossman <cyrozap@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41962 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-08-03 11:13:58 +00:00
John Crispin 4107981069 ramips:support Lenovo AC1200 Wireless router
Lenovo AC1200 series has two types, Y1 and Y1S.
Y1S has 256MB DDR2, Y1 only has 128MB and Y1 have no Giga Port.

Signed-off-by: Lintel <lintel.huang@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41961 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-08-03 11:13:52 +00:00
John Crispin a3ea08a825 ramips: Add support for VoCore
This is based and tested on VoCore Alpha, but other stuff like status/eth LEDs are present on the final board revision + VoDock.
All GPIOs are exported, except spi/i2c.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41939 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-08-01 20:51:24 +00:00
John Crispin f8d6bdb4e2 ramips: add support for easyacc wizard8800
Signed-off-by: Sebastian Wendel <s.wendel@sourceindex.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41936 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-08-01 11:19:50 +00:00
John Crispin ece0d44fe5 ramips: add support for Kingston MLW221
This patch adds support for the Kingston Mobilelite Wireless (MLW-221)

http://wiki.openwrt.org/toh/kingston/mlw221

Signed-off-by: L. D. Pinney <ldpinney@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41841 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-07-26 20:36:22 +00:00
John Crispin ea7c3bba1b ramips: add a profile for AWM003
same as AWM002 but with 64mb RAM

Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41797 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-07-22 09:58:21 +00:00
John Crispin 7a53c25db1 ramips: basic support for Planex MZK-750DHP
some gpios are still missing.

Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41654 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-07-14 17:10:39 +00:00
John Crispin 8fbe1896f9 ramips: add support for WR8305RT board
Signed-off-by: Jorge Vargas <jorge.vargas@sosvia.com>
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41584 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-07-12 06:54:03 +00:00
John Crispin cba7db1e96 ramips: add support for Zbtlink WA05 router
Signed-off-by: Roman Yeryomin <roman@advem.lv>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41579 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-07-10 22:02:28 +00:00
John Crispin a78345d9f5 ralink: add Wansview NCS601W IP Camera
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41453 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-07-02 07:42:44 +00:00
John Crispin 5058f19e84 ramips: add WHR-1166 support
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41447 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-07-01 10:26:42 +00:00
John Crispin bbb8942009 ramips: RT-N56U support fixes and factory image creation
Signed-off-by: Mikko Hissa <mikko.hissa@werzek.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41224 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-06-16 18:57:20 +00:00
John Crispin 90ee91f93d ramips: add asiarf awapn2403 support
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41177 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-06-13 09:16:15 +00:00
John Crispin cef164b23e ralink: add seama image can be upgrade by sysupgrade
generate sysupgrade image by combine two images.
one is kernel image with seama header.
another is root fs image.

Signed-off-by: michael lee <igvtee@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40922 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-06-02 12:43:49 +00:00
John Crispin 67a8c469a9 ralink: Add support for samsung cy-swr1100 wireless router
It is base on rt3662 soc with dual band 802.11n
wireless router. Use rtl8367R switch chip.
This patch adds a profile for this board.
It use seama image header. so i also enable it
on kernel config.

Signed-off-by: michael lee <igvtee@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40908 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-06-02 12:42:52 +00:00
John Crispin 27f53b6560 ramips: Support for Teltonika RUT5XX
Hi Hartmut,

Thanks for your feedback, I have reformated the patch accordingly.

Added support for Teltonika RUT5XX hardware.

Signed-off-by: Steffen Weinreich <steve@weinreich.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40907 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-06-02 12:42:48 +00:00
John Crispin 522d86d5bb ramips: Add support for the 7Links PX-4885 wireless router.
The 7Links PX-4885 is a small battery-powered wireless router.
It is based on a RT5350F WiSoC and features one ethernet port and one
USB port. It is a Hame MPR-A1 clone, except it has different GPIOs,
a different battery and more RAM (32 MB).
This patch adds a profile for this board, the corresponding device tree
file and the adequate base-files changes (incl. sysupgrade).

Signed-off-by: Hugo Grostabussiat <bonstra@bonstra.fr.eu.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40554 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-22 08:08:51 +00:00
John Crispin f4e347c404 ramips: build factory-compatible image for AR725W
Signed-off-by: Claudio Leite <leitec@staticky.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40552 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-22 08:08:42 +00:00
John Crispin e43d64217f ramips: Add Airlink101 AR725W board support
Signed-off-by: Claudio Leite <leitec@staticky.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40549 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-22 08:08:31 +00:00
John Crispin 9f3447fc0e Don't try to generate whr-g300n image if it's going to be more than 4M
Signed-off-by: Roman Yeryomin <roman@advem.lv>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40489 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-12 21:21:44 +00:00