ralink: add support for mt7628
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43197 3c298f89-4303-0410-b956-a3cf2f4a3e73master
John Crispin
parent
e6a6d7d6d1
commit
3d1fb84ada
|
|
@ -9,7 +9,7 @@ include $(TOPDIR)/rules.mk
|
|||
ARCH:=mipsel
|
||||
BOARD:=ramips
|
||||
BOARDNAME:=Ralink RT288x/RT3xxx
|
||||
SUBTARGETS:=rt305x mt7620a mt7620n mt7621 rt3883 rt288x
|
||||
SUBTARGETS:=rt305x mt7620a mt7620n mt7621 mt7628 rt3883 rt288x
|
||||
FEATURES:=squashfs gpio
|
||||
MAINTAINER:=John Crispin <blogic@openwrt.org>
|
||||
|
||||
|
|
|
|||
|
|
@ -115,6 +115,7 @@ ramips_setup_interfaces()
|
|||
dir-320-b1 | \
|
||||
dir-615-h1 | \
|
||||
hlk-rm04 | \
|
||||
mt7628 | \
|
||||
mzk-w300nh2 | \
|
||||
mzk-750dhp | \
|
||||
whr-300hp2 | \
|
||||
|
|
|
|||
|
|
@ -6,12 +6,12 @@
|
|||
. /lib/ramips.sh
|
||||
|
||||
ramips_set_preinit_iface() {
|
||||
RT3X5X=`cat /proc/cpuinfo | egrep "(RT3.5|RT5350)"`
|
||||
RT3X5X=`cat /proc/cpuinfo | egrep "(RT3.5|RT5350|MT7628)"`
|
||||
if [ -n "${RT3X5X}" ]; then
|
||||
swconfig dev rt305x set reset 1
|
||||
fi
|
||||
|
||||
if echo $RT3X5X | grep -q RT5350; then
|
||||
if echo $RT3X5X | egrep -q "(RT5350|MT7628)"; then
|
||||
# This is a dirty hack to get by while the switch
|
||||
# problem is investigated. When VLAN is disabled, ICMP
|
||||
# pings work as expected, but TCP connections time
|
||||
|
|
|
|||
|
|
@ -355,6 +355,9 @@ ramips_board_detect() {
|
|||
*"Lenovo Y1S")
|
||||
name="y1s"
|
||||
;;
|
||||
*"Mediatek MT7628AN evaluation board")
|
||||
name="mt7628"
|
||||
;;
|
||||
*)
|
||||
name="generic"
|
||||
;;
|
||||
|
|
|
|||
|
|
@ -0,0 +1,59 @@
|
|||
/dts-v1/;
|
||||
|
||||
/include/ "mt7628an.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "mediatek,mt7628an-eval-board", "mediatek,mt7628an-soc";
|
||||
model = "Mediatek MT7628AN evaluation board";
|
||||
|
||||
memory@0 {
|
||||
reg = <0x0 0x2000000>;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,57600 init=/init";
|
||||
};
|
||||
|
||||
palmbus@10000000 {
|
||||
spi@b00 {
|
||||
status = "okay";
|
||||
|
||||
m25p80@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "en25q64";
|
||||
reg = <0 0>;
|
||||
linux,modalias = "m25p80", "en25q64";
|
||||
spi-max-frequency = <10000000>;
|
||||
m25p,chunked-io = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0 0x30000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@30000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0x30000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
factory: partition@40000 {
|
||||
label = "factory";
|
||||
reg = <0x40000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@50000 {
|
||||
label = "firmware";
|
||||
reg = <0x50000 0x7b0000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
pcie@10140000 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
|
@ -232,7 +232,7 @@
|
|||
phy-mode = "rgmii";
|
||||
|
||||
interrupt-parent = <&gic>;
|
||||
interrupts = <23>;
|
||||
interrupts = <23>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -0,0 +1,222 @@
|
|||
/ {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "ralink,mtk7628an-soc";
|
||||
|
||||
cpus {
|
||||
cpu@0 {
|
||||
compatible = "mips,mips24KEc";
|
||||
};
|
||||
};
|
||||
|
||||
cpuintc: cpuintc@0 {
|
||||
#address-cells = <0>;
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-controller;
|
||||
compatible = "mti,cpu-interrupt-controller";
|
||||
};
|
||||
|
||||
palmbus@10000000 {
|
||||
compatible = "palmbus";
|
||||
reg = <0x10000000 0x200000>;
|
||||
ranges = <0x0 0x10000000 0x1FFFFF>;
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
sysc@0 {
|
||||
compatible = "ralink,mt7620a-sysc";
|
||||
reg = <0x0 0x100>;
|
||||
};
|
||||
|
||||
watchdog@120 {
|
||||
compatible = "ralink,mt7628an-wdt", "mtk,mt7621-wdt";
|
||||
reg = <0x120 0x10>;
|
||||
|
||||
resets = <&rstctrl 8>;
|
||||
reset-names = "wdt";
|
||||
|
||||
interrupt-parent = <&intc>;
|
||||
interrupts = <24>;
|
||||
};
|
||||
|
||||
intc: intc@200 {
|
||||
compatible = "ralink,mt7628an-intc", "ralink,rt2880-intc";
|
||||
reg = <0x200 0x100>;
|
||||
|
||||
resets = <&rstctrl 9>;
|
||||
reset-names = "intc";
|
||||
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
|
||||
interrupt-parent = <&cpuintc>;
|
||||
interrupts = <2>;
|
||||
|
||||
ralink,intc-registers = <0x9c 0xa0
|
||||
0x6c 0xa4
|
||||
0x80 0x78>;
|
||||
};
|
||||
|
||||
memc@300 {
|
||||
compatible = "ralink,mt7620a-memc", "ralink,rt3050-memc";
|
||||
reg = <0x300 0x100>;
|
||||
|
||||
resets = <&rstctrl 20>;
|
||||
reset-names = "mc";
|
||||
|
||||
interrupt-parent = <&intc>;
|
||||
interrupts = <3>;
|
||||
};
|
||||
|
||||
gpio@600 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
compatible = "mtk,mt7628-gpio", "mtk,mt7621-gpio";
|
||||
reg = <0x600 0x100>;
|
||||
|
||||
gpio0: bank@0 {
|
||||
reg = <0>;
|
||||
compatible = "mtk,mt7621-gpio-bank";
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
|
||||
gpio1: bank@1 {
|
||||
reg = <1>;
|
||||
compatible = "mtk,mt7621-gpio-bank";
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
|
||||
gpio2: bank@2 {
|
||||
reg = <2>;
|
||||
compatible = "mtk,mt7621-gpio-bank";
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
};
|
||||
|
||||
spi@b00 {
|
||||
compatible = "ralink,mt7621-spi";
|
||||
reg = <0xb00 0x100>;
|
||||
|
||||
resets = <&rstctrl 18>;
|
||||
reset-names = "spi";
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi_pins>;
|
||||
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
uartlite@c00 {
|
||||
compatible = "ns16550a";
|
||||
reg = <0xc00 0x100>;
|
||||
|
||||
reg-shift = <2>;
|
||||
reg-io-width = <4>;
|
||||
no-loopback-test;
|
||||
|
||||
resets = <&rstctrl 12>;
|
||||
reset-names = "uartl";
|
||||
|
||||
interrupt-parent = <&intc>;
|
||||
interrupts = <20>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart0_pins>;
|
||||
};
|
||||
};
|
||||
|
||||
pinctrl {
|
||||
compatible = "ralink,rt2880-pinmux";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&state_default>;
|
||||
state_default: pinctrl0 {
|
||||
};
|
||||
spi_pins: spi {
|
||||
spi {
|
||||
ralink,group = "spi";
|
||||
ralink,function = "spi";
|
||||
};
|
||||
};
|
||||
uart0_pins: uartlite {
|
||||
uart {
|
||||
ralink,group = "uart0";
|
||||
ralink,function = "uart";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
rstctrl: rstctrl {
|
||||
compatible = "ralink,mt7620a-reset", "ralink,rt2880-reset";
|
||||
#reset-cells = <1>;
|
||||
};
|
||||
|
||||
usbphy {
|
||||
compatible = "ralink,mt7628an-usbphy", "ralink,mt7620a-usbphy";
|
||||
|
||||
resets = <&rstctrl 22>;
|
||||
reset-names = "host";
|
||||
};
|
||||
|
||||
ehci@101c0000 {
|
||||
compatible = "ralink,rt3xxx-ehci";
|
||||
reg = <0x101c0000 0x1000>;
|
||||
|
||||
interrupt-parent = <&intc>;
|
||||
interrupts = <18>;
|
||||
};
|
||||
|
||||
ohci@101c1000 {
|
||||
compatible = "ralink,rt3xxx-ohci";
|
||||
reg = <0x101c1000 0x1000>;
|
||||
|
||||
interrupt-parent = <&intc>;
|
||||
interrupts = <18>;
|
||||
};
|
||||
|
||||
ethernet@10100000 {
|
||||
compatible = "ralink,rt5350-eth";
|
||||
reg = <0x10100000 10000>;
|
||||
|
||||
interrupt-parent = <&cpuintc>;
|
||||
interrupts = <5>;
|
||||
};
|
||||
|
||||
esw@10110000 {
|
||||
compatible = "ralink,rt3050-esw";
|
||||
reg = <0x10110000 8000>;
|
||||
|
||||
interrupt-parent = <&intc>;
|
||||
interrupts = <17>;
|
||||
};
|
||||
|
||||
pcie@10140000 {
|
||||
compatible = "mediatek,mt7620-pci";
|
||||
reg = <0x10140000 0x100
|
||||
0x10142000 0x100>;
|
||||
|
||||
ranges = <0x2000000 0 0x8000000 0x2000000 0 0x1000000 /* pci memory */
|
||||
0x1000000 0 0x00000000 0x10160000 0 0x10000>; /* io space */
|
||||
|
||||
resets = <&rstctrl 26>;
|
||||
reset-names = "pcie0";
|
||||
|
||||
interrupt-parent = <&cpuintc>;
|
||||
interrupts = <4>;
|
||||
|
||||
status = "disabled";
|
||||
|
||||
pcie-bridge {
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
device_type = "pci";
|
||||
};
|
||||
};
|
||||
|
||||
};
|
||||
|
|
@ -848,6 +848,18 @@ define Image/Build/Profile/Default
|
|||
endef
|
||||
endif
|
||||
|
||||
#
|
||||
# MT7628 Profiles
|
||||
#
|
||||
|
||||
Image/Build/Profile/MT7628=$(call BuildFirmware/Default4M/$(1),$(1),mt7628,MT7628)
|
||||
|
||||
ifeq ($(SUBTARGET),mt7628)
|
||||
define Image/Build/Profile/Default
|
||||
$(call Image/Build/Profile/MT7628,$(1))
|
||||
endef
|
||||
endif
|
||||
|
||||
|
||||
#
|
||||
# Generic Targets
|
||||
|
|
|
|||
|
|
@ -0,0 +1,184 @@
|
|||
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
|
||||
CONFIG_ARCH_DISCARD_MEMBLOCK=y
|
||||
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
|
||||
CONFIG_ARCH_HAS_RESET_CONTROLLER=y
|
||||
CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
|
||||
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
|
||||
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
|
||||
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
|
||||
CONFIG_ARCH_REQUIRE_GPIOLIB=y
|
||||
CONFIG_ARCH_SUSPEND_POSSIBLE=y
|
||||
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
|
||||
CONFIG_AT803X_PHY=y
|
||||
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
|
||||
CONFIG_CEVT_R4K=y
|
||||
CONFIG_CLKDEV_LOOKUP=y
|
||||
CONFIG_CLKEVT_RT3352=y
|
||||
CONFIG_CLKSRC_MMIO=y
|
||||
CONFIG_CLKSRC_OF=y
|
||||
CONFIG_CLONE_BACKWARDS=y
|
||||
CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
|
||||
CONFIG_CMDLINE_BOOL=y
|
||||
# CONFIG_CMDLINE_OVERRIDE is not set
|
||||
CONFIG_CPU_GENERIC_DUMP_TLB=y
|
||||
CONFIG_CPU_HAS_PREFETCH=y
|
||||
CONFIG_CPU_HAS_SYNC=y
|
||||
CONFIG_CPU_LITTLE_ENDIAN=y
|
||||
CONFIG_CPU_MIPS32=y
|
||||
# CONFIG_CPU_MIPS32_R1 is not set
|
||||
CONFIG_CPU_MIPS32_R2=y
|
||||
CONFIG_CPU_MIPSR2=y
|
||||
CONFIG_CPU_R4K_CACHE_TLB=y
|
||||
CONFIG_CPU_R4K_FPU=y
|
||||
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
|
||||
CONFIG_CPU_SUPPORTS_HIGHMEM=y
|
||||
CONFIG_CSRC_R4K=y
|
||||
CONFIG_DEBUG_PINCTRL=y
|
||||
CONFIG_DMA_NONCOHERENT=y
|
||||
# CONFIG_DTB_MT7620A_EVAL is not set
|
||||
# CONFIG_DTB_MT7628AN_EVAL is not set
|
||||
CONFIG_DTB_RT_NONE=y
|
||||
CONFIG_DTC=y
|
||||
CONFIG_EARLY_PRINTK=y
|
||||
CONFIG_GENERIC_ATOMIC64=y
|
||||
CONFIG_GENERIC_CLOCKEVENTS=y
|
||||
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
|
||||
CONFIG_GENERIC_CMOS_UPDATE=y
|
||||
CONFIG_GENERIC_IO=y
|
||||
CONFIG_GENERIC_IRQ_SHOW=y
|
||||
CONFIG_GENERIC_NET_UTILS=y
|
||||
CONFIG_GENERIC_PCI_IOMAP=y
|
||||
CONFIG_GENERIC_SMP_IDLE_THREAD=y
|
||||
CONFIG_GPIOLIB=y
|
||||
CONFIG_GPIO_DEVRES=y
|
||||
CONFIG_GPIO_MT7621=y
|
||||
# CONFIG_GPIO_RALINK is not set
|
||||
CONFIG_GPIO_SYSFS=y
|
||||
CONFIG_HARDWARE_WATCHPOINTS=y
|
||||
CONFIG_HAS_DMA=y
|
||||
CONFIG_HAS_IOMEM=y
|
||||
CONFIG_HAS_IOPORT=y
|
||||
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
|
||||
CONFIG_HAVE_ARCH_JUMP_LABEL=y
|
||||
CONFIG_HAVE_ARCH_KGDB=y
|
||||
CONFIG_HAVE_ARCH_TRACEHOOK=y
|
||||
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
|
||||
CONFIG_HAVE_CC_STACKPROTECTOR=y
|
||||
CONFIG_HAVE_CLK=y
|
||||
CONFIG_HAVE_CONTEXT_TRACKING=y
|
||||
CONFIG_HAVE_C_RECORDMCOUNT=y
|
||||
CONFIG_HAVE_DEBUG_KMEMLEAK=y
|
||||
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
|
||||
CONFIG_HAVE_DMA_API_DEBUG=y
|
||||
CONFIG_HAVE_DMA_ATTRS=y
|
||||
CONFIG_HAVE_DYNAMIC_FTRACE=y
|
||||
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
|
||||
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
|
||||
CONFIG_HAVE_FUNCTION_TRACER=y
|
||||
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
|
||||
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
|
||||
CONFIG_HAVE_IDE=y
|
||||
CONFIG_HAVE_KVM=y
|
||||
CONFIG_HAVE_MACH_CLKDEV=y
|
||||
CONFIG_HAVE_MEMBLOCK=y
|
||||
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
|
||||
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
|
||||
CONFIG_HAVE_NET_DSA=y
|
||||
CONFIG_HAVE_OPROFILE=y
|
||||
CONFIG_HAVE_PERF_EVENTS=y
|
||||
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
|
||||
CONFIG_HW_HAS_PCI=y
|
||||
CONFIG_HW_RANDOM=m
|
||||
CONFIG_HZ_PERIODIC=y
|
||||
CONFIG_ICPLUS_PHY=y
|
||||
CONFIG_IMAGE_CMDLINE_HACK=y
|
||||
CONFIG_INET_LRO=y
|
||||
CONFIG_INITRAMFS_SOURCE=""
|
||||
CONFIG_IRQCHIP=y
|
||||
CONFIG_IRQ_CPU=y
|
||||
CONFIG_IRQ_DOMAIN=y
|
||||
CONFIG_IRQ_FORCED_THREADING=y
|
||||
CONFIG_IRQ_INTC=y
|
||||
CONFIG_IRQ_WORK=y
|
||||
CONFIG_MDIO_BOARDINFO=y
|
||||
CONFIG_MIPS=y
|
||||
# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
|
||||
CONFIG_MIPS_L1_CACHE_SHIFT=5
|
||||
# CONFIG_MIPS_MACHINE is not set
|
||||
CONFIG_MIPS_MT_DISABLED=y
|
||||
# CONFIG_MIPS_O32_FP64_SUPPORT is not set
|
||||
CONFIG_MODULES_USE_ELF_REL=y
|
||||
CONFIG_MT7621_WDT=y
|
||||
# CONFIG_MTD_CFI_INTELEXT is not set
|
||||
CONFIG_MTD_CMDLINE_PARTS=y
|
||||
CONFIG_MTD_M25P80=y
|
||||
CONFIG_MTD_NAND_MT7620=y
|
||||
CONFIG_MTD_PHYSMAP=y
|
||||
CONFIG_MTD_SPLIT_FIRMWARE=y
|
||||
CONFIG_MTD_UIMAGE_SPLIT=y
|
||||
CONFIG_NEED_DMA_MAP_STATE=y
|
||||
CONFIG_NEED_PER_CPU_KM=y
|
||||
CONFIG_NET_RALINK=y
|
||||
CONFIG_NET_RALINK_ESW_RT3052=y
|
||||
# CONFIG_NET_RALINK_MT7620 is not set
|
||||
CONFIG_NET_RALINK_RT305X=y
|
||||
CONFIG_NLS=m
|
||||
CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
|
||||
CONFIG_OF=y
|
||||
CONFIG_OF_ADDRESS=y
|
||||
CONFIG_OF_EARLY_FLATTREE=y
|
||||
CONFIG_OF_FLATTREE=y
|
||||
CONFIG_OF_GPIO=y
|
||||
CONFIG_OF_IRQ=y
|
||||
CONFIG_OF_MDIO=y
|
||||
CONFIG_OF_MTD=y
|
||||
CONFIG_OF_NET=y
|
||||
CONFIG_OF_PCI=y
|
||||
CONFIG_OF_PCI_IRQ=y
|
||||
CONFIG_PAGEFLAGS_EXTENDED=y
|
||||
CONFIG_PCI=y
|
||||
CONFIG_PCI_DOMAINS=y
|
||||
CONFIG_PERF_USE_VMALLOC=y
|
||||
CONFIG_PHYLIB=y
|
||||
# CONFIG_PINCONF is not set
|
||||
CONFIG_PINCTRL=y
|
||||
CONFIG_PINCTRL_RT2880=y
|
||||
# CONFIG_PINCTRL_SINGLE is not set
|
||||
# CONFIG_PREEMPT_RCU is not set
|
||||
CONFIG_RALINK=y
|
||||
CONFIG_RALINK_USBPHY=y
|
||||
# CONFIG_RALINK_WDT is not set
|
||||
CONFIG_RA_NAT_NONE=y
|
||||
# CONFIG_RCU_STALL_COMMON is not set
|
||||
CONFIG_RESET_CONTROLLER=y
|
||||
# CONFIG_SCSI_DMA is not set
|
||||
CONFIG_SERIAL_8250_NR_UARTS=4
|
||||
CONFIG_SERIAL_8250_RT288X=y
|
||||
CONFIG_SERIAL_OF_PLATFORM=y
|
||||
# CONFIG_SLAB is not set
|
||||
CONFIG_SLUB=y
|
||||
CONFIG_SOC_MT7620=y
|
||||
# CONFIG_SOC_MT7621 is not set
|
||||
# CONFIG_SOC_RT288X is not set
|
||||
# CONFIG_SOC_RT305X is not set
|
||||
# CONFIG_SOC_RT3883 is not set
|
||||
CONFIG_SPI=y
|
||||
CONFIG_SPI_MASTER=y
|
||||
CONFIG_SPI_RT2880=y
|
||||
CONFIG_SWCONFIG=y
|
||||
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
|
||||
CONFIG_SYS_HAS_CPU_MIPS32_R2=y
|
||||
CONFIG_SYS_HAS_EARLY_PRINTK=y
|
||||
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
|
||||
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
|
||||
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
|
||||
CONFIG_TICK_CPU_ACCOUNTING=y
|
||||
CONFIG_USB=m
|
||||
CONFIG_USB_COMMON=m
|
||||
# CONFIG_USB_EHCI_HCD is not set
|
||||
CONFIG_USB_PHY=y
|
||||
CONFIG_USB_SUPPORT=y
|
||||
# CONFIG_USB_UHCI_HCD is not set
|
||||
CONFIG_USE_OF=y
|
||||
CONFIG_WATCHDOG_CORE=y
|
||||
CONFIG_ZONE_DMA_FLAG=0
|
||||
|
|
@ -0,0 +1,18 @@
|
|||
#
|
||||
# Copyright (C) 2011 OpenWrt.org
|
||||
#
|
||||
# This is free software, licensed under the GNU General Public License v2.
|
||||
# See /LICENSE for more information.
|
||||
#
|
||||
|
||||
define Profile/Default
|
||||
NAME:=Default Profile
|
||||
PACKAGES:=\
|
||||
kmod-usb-core kmod-usb2 kmod-usb-ohci \
|
||||
kmod-ledtrig-usbdev
|
||||
endef
|
||||
|
||||
define Profile/Default/Description
|
||||
Default package set compatible with most boards.
|
||||
endef
|
||||
$(eval $(call Profile,Default))
|
||||
|
|
@ -0,0 +1,15 @@
|
|||
#
|
||||
# Copyright (C) 2009 OpenWrt.org
|
||||
#
|
||||
|
||||
SUBTARGET:=mt7628
|
||||
BOARDNAME:=MT7628 based boards
|
||||
ARCH_PACKAGES:=ramips_24kec
|
||||
FEATURES+=usb
|
||||
CPU_TYPE:=24kec
|
||||
CPU_SUBTYPE:=dsp
|
||||
|
||||
define Target/Description
|
||||
Build firmware images for Ralink MT7628 based boards.
|
||||
endef
|
||||
|
||||
Loading…
Reference in New Issue