2c12f6c298
kernel: add missing kernel config symbol
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37423 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-19 09:51:20 +00:00
9cc3d19968
imx23: add back the missing imx23 target dependency
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37417 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-18 17:26:46 +00:00
b476b18850
imx23: ChipIdea changes
...
- move ci_hdrc into generic modules
- add separate package for imx-specific modules
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37384 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-17 22:49:16 +00:00
67ff2b4bea
ramips: add sysupgarde support for wl-330n3g
...
https://dev.openwrt.org/ticket/13891
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37376 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-17 09:44:57 +00:00
f0477b161e
imx6: add missing patches (r37363)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37364 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-15 23:44:26 +00:00
3dfb985e35
imx6: add support for gw5400-a
...
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37363 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-15 23:18:39 +00:00
a3c219ccf6
imx6: use $PATH to locate dtc binary
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37362 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-15 23:18:37 +00:00
28938bdf32
ramips: make the old dwc driver depend on v3.9
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37357 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-15 21:06:03 +00:00
62c5eae58a
ramips: add v3.10 kernel config files
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37356 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-15 21:05:58 +00:00
e411781235
kernel: v3.10 has no GENERIC_GPIO anymore
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37355 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-15 21:05:53 +00:00
557151229e
ramips: fix ehci/ohci OF binding
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37354 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-15 21:05:47 +00:00
fd3b8b725e
ramips: update dtsi files to work with dwc2 driver
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37353 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-15 21:05:42 +00:00
d763a4ca0c
ramips: add a explicit reset to dwc2
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37352 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-15 21:05:36 +00:00
c40e3c0d0e
ar71xx: fix uimage split for ew-dorin
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37350 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-15 16:59:58 +00:00
e275127084
ar71xx: refresh patches
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37349 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-15 15:12:41 +00:00
139bd7c844
kernel: refresh 3.10 patches
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37348 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-15 15:12:37 +00:00
c369d9184c
kernel: fix another corner case in the bridge state patch ( #13874 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37347 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-15 15:12:33 +00:00
f23bda0672
kernel: fix a bridge issue that broke WDS client handling in 3.9+
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37341 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-15 12:25:58 +00:00
644773a583
brcm47xx: fix name of patch
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37340 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-15 11:42:54 +00:00
1800de8365
ramips: add a patch to make dwc2 work with boards that have an old bootloader
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37339 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-15 11:34:13 +00:00
aefdd583c9
bcm63xx: update ralink wlan firmware hotplug script for new eeprom size
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37337 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-15 11:07:59 +00:00
901cda385d
lantiq: update ralink wlan firmware hotplug script for new eeprom size
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37334 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-15 11:06:07 +00:00
f707f369de
kernel: fix block2mtd build after removing the device refresh ioctl
...
fixes #13882
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37332 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-15 11:01:48 +00:00
0b4bd54afb
ramips: add ralink v3.10 support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37331 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-15 10:06:55 +00:00
e83bb26670
imx6: switch to askconsole
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37326 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-15 00:03:40 +00:00
f361a4c91f
ar71xx: remove patches for 3.8 (leftover after r37315)
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37324 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 22:57:47 +00:00
ceda2a3f2d
realview: switch to 3.10 kernel
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37322 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 21:04:36 +00:00
e7ac785e74
realview: add support for 3.10 kernel
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37321 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 21:04:15 +00:00
b930eec308
kernel: add some more ARM related configuration symbols
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37320 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 21:03:53 +00:00
09a1a79128
lantiq: apply [37258] also to the 3.9 kernel patches
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37317 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 18:28:02 +00:00
7c87681a6f
ar71xx: fix maximum watchdog timeout
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37315 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 18:01:09 +00:00
24f20fee78
ramips: disable ill_acc driver by default
...
The driver seems to be causoing boot rpoblems on some SoCs
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37314 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 18:01:00 +00:00
d4b8b8d62f
ralink: drop v3.8 support
...
Signed-off-by: John Crispin <blogic@opewnrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37311 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 18:00:34 +00:00
6bcbd536ed
ar71xx: update to 3.10.1
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37310 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 17:29:56 +00:00
4cd2167005
brcm47xx: use b53 phy driver for the switch in kernel 3.10
...
This makes it possible to use swconfig to controll the switch.
This was tested with devices using b43 and bgmac.
This was not tested on devices using tg3.
This does not support the adm switch used in some very old devices.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37304 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 14:11:17 +00:00
c1bd015d31
ar71xx: use uimage split for WHR-HP-G300N
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37303 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 14:06:01 +00:00
56386d5666
ar71xx: use uimage split for dlrtdev
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37302 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 14:05:57 +00:00
191e61e4f7
ar71xx: use uimage split for Allnet devices
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37301 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 14:05:53 +00:00
b41b7c54af
ar71xx: use uimage split for Cameo devices
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37300 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 14:05:50 +00:00
cb2f4a3084
ar71xx: use uimage split for DIR-825B1
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37299 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 14:05:46 +00:00
50e69a1452
ar71xx: use uimage split for Embedded Wireless Dorin
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37298 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 14:05:42 +00:00
3b000a1480
ar71xx: use uimage split for Ubiquiti XM devices
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37297 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 14:05:39 +00:00
e53672309b
ar71xx: increase kernel size for wndr3700 based devices
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37296 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 14:05:35 +00:00
246ecf6b9d
ar71xx: use uimage split for WZR-HP-G300NH2
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37295 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 14:05:31 +00:00
4fe58418fb
ar71xx: enable uimage split for wzr-hp-ag300h/wzr-600dhp
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37294 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 14:05:27 +00:00
482ed090de
ar71xx: use uimage split for WZR-HP-G300NH
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37293 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 14:05:23 +00:00
f551bccbe6
ar71xx: use uimage split for WZR-HP-G450H
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37292 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 14:05:19 +00:00
ec6d65280b
ar71xx: enable uimage split and use it for carambola2
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37291 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 14:05:16 +00:00
6079393d55
ar71xx: remove linux 3.8
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37290 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 14:05:12 +00:00
aad55d92d6
ar71xx: move the watchdog driver to the kernel
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37289 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 14:05:08 +00:00
215f8e9d8e
ar71xx: set linux 3.10 as default
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37288 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 14:05:04 +00:00
d631e85a63
brcm47xx: add initial support for kernel 3.10
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37287 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 13:44:45 +00:00
652844194b
brcm47xx: fix switch handling
...
This fixes some problems with the switch handling
* It now send the messages again to indicate a button for failsafe mode should be pressed
* it does not leak packages between wan and lan any more
* the switch works again in normal mode
The Ethernet connection has to be up when the switch driver switch-robo
is insmoded therefor we just do it again.
Explicitly set enable_vlan to prevent leaking packages.
This should close #13869 , #13868 and #13716
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37286 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 13:19:58 +00:00
5c482f63ea
kernel: disable the yaffs2 /proc code to make it compile on linux 3.10 ( #13848 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37285 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 13:10:22 +00:00
5b1af986f6
brcm47xx: do not load the kernel modules needed for Ethernet manually
...
add the boot flag to make the kernel modules needed for Ethernet and
diag load on startup.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37284 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 12:59:00 +00:00
fe0b737198
kernel: implement automatic rootfs split from the firmware partition in linux 3.10 (disabled by default)
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37283 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 12:57:03 +00:00
4ea1473546
kernel/base-files: clean up old code related to refreshing mtd partitions, it is no longer used anywhere
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37282 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 12:56:58 +00:00
6859bb2428
brcm47xx: do not change nvram without user interaction
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37281 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 12:56:42 +00:00
8dfaf53e4d
kernel: refresh patches for kernel 3.8.13
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37276 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-13 22:45:56 +00:00
6390b285e9
kernel: update to kernel 3.10.1 and refresh patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37275 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-13 22:45:09 +00:00
460f420734
kernel: update to kernel 3.9.10 and refresh patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37274 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-13 22:43:10 +00:00
f78f7471c9
ar71xx: fix ar933x watchdog clock ( #13866 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37273 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-13 22:29:53 +00:00
5791ea36fd
brcm47xx: proc gets mounted without this patch
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37272 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-13 21:42:19 +00:00
14e7f6fd43
brcm47xx: remove obsolete hotplug stuff
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37271 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-13 20:38:33 +00:00
21201be1f4
bcm53xx: add initial support for ARM based BCM47XX and BCM53XX SoCs
...
This was only tested on a Netgear R6250, but it could also work on
other devices when the correct images are generated.
It is only possible to boot into a ram disk, no Ethernet, Wifi, flash,
USB is supported.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37268 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-12 13:46:27 +00:00
0f44966ec8
ar71xx: add carambola2 support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37260 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-11 21:16:53 +00:00
1eff8c3206
lantiq: revert 36778 as it breaks irq assignment to pci devices
...
Reported-by: Matti Laakso
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37258 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-11 21:16:34 +00:00
79d759c52e
kernel: add a patch that reduces module size by removing non-essential information (reduces default rootfs size by ~5k after lzma)
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37255 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-11 20:56:27 +00:00
568ed0a9f3
kernel: disable CONFIG_RD_LZMA by default, it will be selected when actually needed
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37253 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-11 20:56:19 +00:00
c4625f0383
kernel: disable CONFIG_CLS_U32_PERF by default, it is usually not needed
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37252 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-11 20:56:15 +00:00
584f6dfd7c
ar71xx: set priority of ath79_wdt to 1
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37251 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-11 17:01:08 +00:00
557954455b
ar71xx: fix TPLINK/TPLINKOLD initramfs images typos
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37237 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-10 21:28:34 +00:00
9e94c1b6b0
brcm2708: drop support for 3.3 kernel
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37236 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-10 19:43:11 +00:00
255edebff6
brcm2708: package the i2c master driver module
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37235 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-10 19:43:07 +00:00
9c138f1cf4
brcm2708: package the SPI master controller driver
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37234 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-10 19:43:02 +00:00
f199e67fb7
kernel: add a bunch of missing LCD Kconfig options
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37233 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-10 19:42:58 +00:00
2de362a1e8
brcm2708: package the HW random module
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37232 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-10 19:42:53 +00:00
c7ae72df76
ar71xx: fix Netgear initramfs images
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37230 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-10 17:18:03 +00:00
7c91723762
ar71xx: fix some more issues with initramfs images
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37229 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-10 15:22:47 +00:00
a429db0821
ar71xx: make implicit alignment in struct pptp_addr explicit to fix ABI breakage caused by the unaligned access hacks patch
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37223 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-10 11:33:43 +00:00
134ad9827b
brcm2708: update maintainership
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37220 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-09 20:53:13 +00:00
9228171ee2
brcm2708: switch to 3.10 kernel
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37219 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-09 20:53:08 +00:00
dd45e57a2b
brcm2708: add support for 3.10 kernel
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37218 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-09 20:52:49 +00:00
0030861536
kernel: add missing configuration symbols used on ARM platforms
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37217 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-09 20:52:23 +00:00
069777f640
kernel: update PATCHES with a stricter policy
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37216 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-09 20:52:07 +00:00
f42a1b166f
ar71xx: add linux 3.10
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37214 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-09 12:52:18 +00:00
4bf4528426
kernel: debloat the lzma compress/decompress code some more
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37211 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-09 12:52:04 +00:00
5470f607c6
kernel: do not accept sysrq characters via serial port
...
many boards have a disconnected TTL level serial which can generate
some garbage that can lead to spurious false sysrq detects.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37210 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-09 12:52:00 +00:00
3be898455b
kernel: add missing config symbol
...
Should fix buildbot builds of ixp4xx.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37208 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-09 07:51:09 +00:00
acefc38cf1
imx23: add gpio_sysfs support
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37207 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-08 23:08:26 +00:00
8f63276f1c
ralink: vlan offloading is causing problems. disable it
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37203 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-08 16:34:52 +00:00
477ffef173
ralink: unbreak ralink i2c support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37202 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-08 09:01:57 +00:00
07a6e227f7
ralink: add i2c-ralink kmod info
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37200 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-08 09:01:47 +00:00
058f768c19
linux: refresh kernel configs with kconfig.pl
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37195 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-08 08:40:22 +00:00
a40f5f2d24
ar71xx: disable JTAG on TL-WR841N-v8/MR3420v2
...
It also fixes USB Power on MR3420v2.
Signed-off-by: Dmytro <dioptimizer@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37194 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-08 08:40:21 +00:00
90421e83a5
ar71xx: fix partition layout on Netgear WNDAP360
...
Signed-off-by: Jacek Kikiewicz <jaceq@aol.pl>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37193 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-08 08:40:20 +00:00
137eb45ff4
ar71xx: fix for wrong eth0 mac assignment on Netgear WNDAP360
...
Signed-off-by: Jacek Kikiewicz <jaceq@aol.pl>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37192 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-08 08:40:18 +00:00
340276c878
lantiq: etop enable gbit port0
...
Signed-off-by: Antonios Vamporakis <vamporakis@yahoo.com>
Signed-off-by: Luka Perkov <luka@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37191 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-08 07:11:59 +00:00
c39701f9cf
kernel: disable zisofs and zlib by default, reduces kernel size after lzma by ~10k
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37187 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-06 14:49:24 +00:00
ab8a53dfae
imx23: fix kernel module dependencies
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37181 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-06 14:48:56 +00:00
1206a04577
lantiq: add device tree support for arv4519pw
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37178 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-05 07:44:42 +00:00
11c005ccfc
ar71xx: merge patches [611-*,621-*] into 610-*
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37176 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-04 23:31:39 +00:00
17eb204230
imx23: bump kernel to 3.10
...
- fix BOARDNAME
- add profile for Olinuxino boards
- prep image Makefile for u-boot inclusion, separate out bootlet build
- update kernel config to reflect updated chipidea requirements
- update rtc/watchdog config
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37175 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-04 22:25:26 +00:00
f60606db7e
kernel/generic: add missing regulator symbols for 3.10
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37169 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-04 16:58:22 +00:00
ce1df66cd6
ar71xx: Buffalo WZR-HP-AG300H (600DHP) enable PCI
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37167 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-04 13:45:29 +00:00
e317f022b6
ramips: fix RT-N13U gpio buttons
...
https://dev.openwrt.org/ticket/13795
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37163 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-04 13:31:23 +00:00
d00812c4ce
brcm47xx: fix module insert order
...
https://dev.openwrt.org/ticket/13811
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37161 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-04 13:31:13 +00:00
e8c98290c8
ar71xx: $(KDIR_TMP) must be present before starting initramfs build
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37155 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-04 12:48:52 +00:00
f734ba771b
ixp4xx: replace magic number with macros in avila/ixdp425/miccpt PCI routing setup
...
Replace magic number with the appropriate macro in
avila/ixdp425/miccpt PCI routing setup.
Signed-off-by: Tamas TEVESZ <ice@extreme.hu>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37154 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-03 17:51:54 +00:00
a3a701aee7
ixp4xx: switch to kernel 3.10
...
Fixes network issues at least on NSLU2 (#13801 ).
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37153 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-03 17:51:44 +00:00
ef8be8bc19
lantiq: fix initramfs
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37143 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-03 09:17:15 +00:00
f7cecf733d
imx6: make kernel_oldconfig
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37134 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-02 23:08:16 +00:00
e29dea1e32
ar71xx: Buffalo WZR-HP-AG300H (600DHP) change button type
...
switch buttons should be declared as switch so the failsafe shell is not
triggered by accident in procd
Signed-off-by: Luka Perkov <luka@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37131 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-02 10:45:32 +00:00
732b42089a
ar71xx: only invoke Initramfs building when enabled
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37129 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-02 10:43:31 +00:00
75393b5cdc
lantiq: xrx200_net compile fix
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37126 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-02 09:34:45 +00:00
40d4aeae36
ixp4xx: add support for linux 3.10
...
Run tested on a NSLU2.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37124 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-01 18:42:49 +00:00
6b380a70cf
kernel: add missing config symbol for 3.10
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37123 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-01 18:42:39 +00:00
ffccd6fa5f
ar71xx: fix initramfs images generation after r37049
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37120 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-01 15:37:25 +00:00
565a1a3a6e
kernel: update linux 3.10 to 3.10 final
...
3.10 final is out, so refresh patches and add md5sum.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37116 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-01 13:21:06 +00:00
573f9156dc
ramips: update wlan firmware hotplug script for new eeprom size
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37112 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-30 21:03:48 +00:00
a4c4a82647
kernel: update linux 3.9 to 3.9.8
...
Includes memory allocation fixes as well as several networking fixes.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37103 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-30 13:10:12 +00:00
34747df14a
brcm63xx: Fixes and additions to the GPIO assignment of Huawei HW556 leds
...
- Some fixes for the incorrect GPIO assignment of leds on Huawei HW556.
- Addition of unassigned (LAN) leds which can be found on the back of the device.
Signed-off-by: Angga Reza Fardana <angga@norture.com>
Patchwork: http://patchwork.openwrt.org/patch/3744/
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37102 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-30 13:10:08 +00:00
a1bd9fa948
bcm63xx: Improve CFE version mod patch.
...
Fix "cfe-" string length copy.
Check if there's an extra byte a.b.c-d.e / a.b.c-d.e-f.
Add support for Huawei CFE versions ("cfe-vd").
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3766/
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37101 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-30 13:10:05 +00:00
5ef36b2bd9
bcm63xx: enable all SoCs for both subtargets
...
Now that SMP kernels also work on older SoCs, also enable them for SMP.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37100 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-30 13:10:03 +00:00
ee63aa9e6b
bcm63xx: make smp kernels boot on older SoCs
...
Enhance BMIPS support so SMP kernels work on older chips.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37099 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-30 13:10:00 +00:00
028702bc97
bcm63xx: update patches
...
Update patches with their upstream versions.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37098 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-30 13:09:50 +00:00
6f085ea93a
lantiq: add v3.9 support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37089 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-29 18:16:56 +00:00
1b8ff1a334
lantiq: Add support for loading athxk eeproms through mtd
...
This patch enables retrieving the wifi calibration data from an MTD partition.
Try to copy mac address from ethernet before generating a random one.
This fixes DGN3500 ath9k support.
Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37087 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-29 16:33:46 +00:00
858714fd06
lantiq: fix kernel config for DEU support
...
Trying to load the DEU modules results in unresolved symbols. This
provides them. This requires the previous patch to be applied first.
Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37086 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-29 16:33:37 +00:00
baa114b59c
lantiq: make xrx200 network driver use a tasklet for rx housekeeping
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37085 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-29 16:33:28 +00:00
42f6edb43c
lantiq: remove 3.7 kernel patches
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37084 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-29 16:33:18 +00:00
e9e6f6e105
ramips: unbreak initramfs generation
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37080 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-29 08:41:03 +00:00
1bd081cf6f
targets: fix remaining targets for initramfs builds
...
Fix some bugs that slipped through while making initramfs non exclusive.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37079 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-28 22:56:34 +00:00
875f0ec22a
kernel: add global menuconfig option to enable kexec support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37073 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-28 11:27:20 +00:00
45af63871e
orion: disable normal router support for the harddisk subtarget
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37069 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-28 11:27:06 +00:00
ef26ab5715
orion: disable CONFIG_VM_EVENT_COUNTERS by default
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37068 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-28 11:27:02 +00:00
74e55be83a
orion: dynamically generate /etc/config/network, the LaCie 2big Network does not use DSA
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37061 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-28 11:26:37 +00:00
4e9fb88844
orion: add support for the lacie 2big network device
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37059 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-28 11:26:29 +00:00
02af80c004
ramips: fix ethernet driver
...
make sure the driver does not crash under load
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37058 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-28 11:22:11 +00:00
704e2ed39d
targets: prepare for supporting normal and initramfs images
...
In order to support both normal images and initramfs, ensure that each
target sets KERNELNAME properly so that the generic kernel building code
can copy the corresponding files over $(KDIR) with the appropriate
extension. Update the various paths to the kernel and wrapper images
from $(LINUX_DIR)/arch/$(ARCH)/boot/$(foo) to $(KDIR)/$(foo).
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37049 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-27 19:58:31 +00:00
d8836e5aeb
ramips: fix rt2x00 ethernet compile bug
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37043 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-27 16:45:40 +00:00
32c2e13ec7
ramips: add missing symbols to rt288x config
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37042 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-27 16:45:26 +00:00
9de0254dbf
ramips: fix ethernet stability issue introduced by recent kernel upgrade
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37041 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-27 16:28:06 +00:00
ca9e1e031d
imx23: add new target for i.MX233-based boards
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37038 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-27 10:12:03 +00:00
566478a7ec
kernel/generic: add missing regulator symbols for 3.9
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37036 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-26 21:48:17 +00:00
c2b401b3f8
bcm63xx: fix DSL-274xB F1 default network config
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37032 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-24 20:35:54 +00:00
6d4d47f265
ramips: move ESW reset to preinit on RT305x/RT5350
...
RT305x/RT5350 SoCs require the switch to be reset before touching the ethernet
interface, otherwise the driver will panic.
As we already init the ethernet in preinit we therefor need to reset the switch
before that.
Signed-off-by: Felix Kaechele <felix@fetzig.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37027 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-24 12:39:28 +00:00
a6bc96ccd5
ramips: make rt3883 usb work properly
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37024 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-24 12:06:56 +00:00
24fb5b0214
ramips: revert gpio regulator dts update
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37021 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-24 11:09:50 +00:00
5f6caa26e5
ralink: update patches
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37016 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-23 15:50:49 +00:00
81e16ac101
kernel: fix a reference counting bug in overlayfs
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37014 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-22 14:00:12 +00:00
d2642de749
lantiq: Tune the XWAY subtarget cflags
...
This patch sets the cflags -mtune=34kc -mdsp only in XWAY subtarget, while the others remain with mtune=mips32r2.
Although the Danube has a Mips 24KEc core performs well with the above cflags.
Signed-off-by: José Vázquez Fernández <ppvazquezfer@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37006 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-21 16:54:15 +00:00
1c19298315
lantiq: set mips16 support.
...
Set mips16 support in XWAY subtarget.
This patch is based in changeset #36600
Signed-off-by: José Vázquez Fernández <ppvazquezfer@gmail.com>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37005 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-21 16:54:07 +00:00
94d75044c4
lantiq: Fix ARV7518 DTS definitions
...
Fix EBU leds by removing req2 and gnt2 from pinmux.
Fix rfkill button gpio.
Enable reset button.
Fix power led activation status.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37004 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-21 16:54:03 +00:00
623e6025a8
base-files: input/button drivers get loaded before preinit by procd
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37000 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-21 16:53:47 +00:00
02f1075b0a
base-files: diag does not need to insmod any drivers, procd already did it for us
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36999 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-21 16:53:43 +00:00
d88dd83d90
brcm47xx: dont manually insmod switch drivers
...
Signed-off-by: John Crispin <bloic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36993 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-21 16:53:15 +00:00
ce0ccca1f7
ar71xx: drop procd_init console hack
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36992 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-21 16:53:11 +00:00
d20937ac5b
[ppc40x]: increase kernel partition size to fix boot issues
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36982 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-21 10:57:05 +00:00
6fe1c0b459
brcm63xx: reduce the number of Ethernet DMA channels from 16 to 8
...
We currently used 16 DMA Ethernet channels, but the hardware only
supports up to 8 (with 2 per enet and the remaining for USB slave).
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36979 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-20 18:47:36 +00:00
79d96c9361
linux-3.8: backport a leds-gpio.c crash fix ( fixes #13721 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36968 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-18 22:23:38 +00:00
fcf2609605
brcm63xx: refresh 3.9 patches
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36958 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-18 10:54:28 +00:00
4c0b484f86
brcm63xx: provide a default sane MAC address for Cable Modem devices
...
Cable modem devices currently poke at some random location in RAM and
may end up having an invalid MAC address which is not suitable. Provide
a default one which is sane.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36957 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-18 10:54:24 +00:00
23a7a4a036
brcm63xx: create initramfs HCS images
...
Cable Modem devices cannot load an ELF file directly so we need to
provide them with a HCS image even when targetting initramfs.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36954 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-17 22:57:04 +00:00
9e3b17277e
brcm63xx: simplify HCS image creation
...
$(KDIR)/vmlinux is already a binary image, there is no need to create
another one.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36949 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-17 19:32:56 +00:00
447128f9cf
brcm63xx: remove support for 3.8 kernel
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36948 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-17 19:32:47 +00:00
feaa92e91c
brcm63xx: switch to 3.9 kernel
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36947 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-17 19:32:42 +00:00
7884e6e60e
brcm63xx: fix missing antislash in BCM6345 ethernet patch
...
This would cause build failure when disabling support for particular
CPUs.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36946 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-17 19:32:35 +00:00
ed11b6185b
kirkwood: disable the CONFIG_IP_ADVANCED_ROUTER kernel config override ( #13702 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36937 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-15 11:50:50 +00:00
1f3599ecc4
brcm47xx: run make kernel_oldconfig for 3.9 kernel config
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36928 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-12 14:51:50 +00:00
639a356c06
brcm47xx: remove support for kernel 3.6
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36927 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-12 14:48:45 +00:00
7a79a9e8f6
brcm47xx: add initial support for kernel 3.9
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36926 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-12 14:47:53 +00:00
ae2609531f
linux: add ipv6 failed-policy routing action (by Jonas Gorski)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36911 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-11 09:27:53 +00:00
6c95162c34
lantiq: Fixes to athxk EEPROM loading
...
Use platform data array for storing ath5k EEPROM instead of creating another one.
EEPROM size is 2048 words (2 bytes), so we must read 4096 bytes from flash.
No need to keep the checksum fix now that the EEPROM is loaded completely.
Add a manual eeprom swap for ath9k and keep the endian way.
Use mac-offset property retrieved from the DTS.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36901 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-10 08:25:12 +00:00
46a5493d48
lantiq: make kernel_oldconfig
...
Seems the existing kernel config for 3.8 was cp'ed from 3.7; this patch
is the result of "make kernel_oldconfig" with defaults for new options.
Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36900 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-10 08:25:07 +00:00
80ecbd5197
lantiq: diag.sh with both red and green power LEDs
...
This provides a boot LED sequence suitable for devices with both red and
green LEDs for power. This assumes no "default-on" settings in the
device tree.
Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36899 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-10 08:25:02 +00:00
ecb32a2174
ramips: add HAME MPR-A2 support
...
This patch adds support for HAME MPR-A2 router using a DTS file.
The platform is Ralink RT5350.
http://wiki.openwrt.org/toh/hame/mpr-a2
Signed-off-by: Dmitry Shmygov <shmygov@rambler.ru>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36898 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-10 08:24:56 +00:00
a4e76e8e46
ramips: add support for belkin F7C027 wemo/homeautomatisation plug
...
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36897 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-10 08:24:50 +00:00
0124271f8e
lantiq: fix formating in .dts files
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36882 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-08 11:36:07 +00:00
b3019e49e1
ar71xx: disable routerboard support in the generic subtarget, enable it for the nand subtarget only
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36879 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-07 13:42:50 +00:00
8affc70230
kernel/generic: add a few missing kernel config symbols
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36878 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-07 13:42:39 +00:00
15412a066d
brcm63xx: add user-space support for Netgear CVG834G
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36877 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-06 22:22:20 +00:00
268ab66151
brcm63xx: add kernel space and image support for the Netgear CVG834G
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36876 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-06 22:22:14 +00:00
25a96c2b76
brcm63xx: add Broadcom cable modem firmware format header
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36875 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-06 22:22:09 +00:00
370609a4b8
brcm63xx: add support for BCM3368
...
Add support for the Broadcom BCM3368 cable modem chipset, includes:
- Ethernet
- SPI
- UARTs
- GPIOs
- PCI
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36874 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-06 22:21:58 +00:00
103893f67e
target: don't build jffs2 nor images by default
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36863 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-05 20:58:59 +00:00
44dd2540ac
omap24xx: convert to use the new jffs2_nand
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36862 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-05 20:58:55 +00:00
c926c403ad
kirkwood: convert to use the new jffs2_nand
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36861 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-05 20:58:53 +00:00
32d5d128ef
[orion]: there's no reason to have these generic files in the bin dir either
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36852 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-05 06:46:41 +00:00
31eaa46c9b
[orion]: only copy uImages to the bin dir on ramdisk builds
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36851 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-05 06:17:12 +00:00
4df0b1706c
[orion]: don't copy the zImages to the bin dir, factory u-boots can't use them
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36850 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-05 06:04:48 +00:00
11706ba13e
ar71xx: add support for WIFI button on tp-link tl-mr3220v2
...
The TP-LINK TL-MR3220 v2 has a button on the left side
labeled "WIFI". This is GPIO 24. This patch adds the
support for this button.
Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36848 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-04 13:25:54 +00:00
abb05a413a
generic: add port mirroring/monitoring capability to rtl8366rb switch
...
This patch adds swlib attributes to the RTL8366RB switch/PHY found in the
TL-WR1043ND router that allow to mirror ethernet packets to a monitor port.
Signed-off-by: Colin Leitner <colin.leitner@googlemail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36847 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-04 13:25:52 +00:00
64b5929539
[orion]: versioned files and dirs still make no sense when you support only a single kernel...
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36836 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-04 11:29:01 +00:00
6a9bdec862
[generic/3.10]: refresh patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36835 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-04 11:24:42 +00:00
8b784f4b12
[generic/3.10]: add some more symbols
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36834 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-04 11:23:27 +00:00
8133b57540
[orion]: move DT2 related kernel options into the harddist subtarget
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36833 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-04 11:19:41 +00:00
662e136d40
[orion]: drop support for the dns323
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36832 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-04 11:13:18 +00:00
689059dc86
lantiq: revert [36779] as it caused a regression
...
submitter was informed of a endinaess swap regression and replied with "works on my board"
revert the patch and make arv7518 wifi work again
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36807 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-31 13:25:07 +00:00
c94434f29f
ar71xx: register USB port for RB2011U* devices
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36801 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-30 17:38:31 +00:00
86e0f5976e
ar71xx: create a separated network interface for the RB2011UAS SFP port
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36800 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-30 17:38:30 +00:00
97254ab640
ar71xx: make the SFP port usable on RB2011*S boards
...
The port 6 of the switch is connected to the SFP
cage on the RB2011*S boards. Add a helper function
to correctly initialize the switch configuration
data on those boards to make the SFP port usable.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36799 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-30 17:38:28 +00:00
267fc66f77
generic: ar8216: allow to specify SGMII config via platform data
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36798 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-30 17:38:26 +00:00
111bea7cd3
generic: ar8216: add get_port_link callback
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36797 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-30 17:38:22 +00:00
133498bac5
ar71xx: rb2011: add switch led control values
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36796 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-30 17:38:21 +00:00
83c3f0f918
ar71xx: rb2011: update RGMII RX/TX delay values
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36795 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-30 17:38:20 +00:00
7d955c422b
ar71xx: rb2011: move NAND nCE init to rb2011_nand_init
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36794 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-30 17:38:17 +00:00
c647fa6c82
ar71xx: add user-space support for RB2011UAS
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36793 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-30 17:38:15 +00:00
9badcc468f
ar71xx: add kernel support for the RB2011UAS
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36792 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-30 17:38:13 +00:00
d6f871012c
generic: ar8216: show chip revision in the kernel log
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36791 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-30 16:25:14 +00:00
4b28aa5b5c
ar71xx: add profile and build image for the Archer C7 board
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36790 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-30 16:23:10 +00:00
a7f2edfe43
ar71xx: add user-space support for TP-LINK Archer C7 board
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36789 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-30 16:23:09 +00:00
2635f67744
ar71xx: add kernel support for the TP-LINK Archer C7 board
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36788 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-30 16:23:07 +00:00
581e0e117e
ar71xx: add USB workarounds for AR934x/QCA955x SoCs
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36787 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-30 16:23:06 +00:00
b35eea4aea
ar71xx: add profile and build image for the DIR-601-B1
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36786 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-30 16:19:30 +00:00
9a188388ce
ar71xx: allow to build CameoHornet images for multiple regions
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36785 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-30 16:19:29 +00:00
6a19ebe025
ar71xx: allow to override fw version in CameoHornet profile
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36784 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-30 16:19:28 +00:00
1ab2d61148
lantiq: ARV752DPW: fix reboot loop caused by wrong GPIO setting
...
The GPIO buttons of ARV752DPW are active low.
Treating them as active high caused a reboot loop as a reset-button
press is detected by gpio-button-hotplug/gpio-keys-polled on startup.
This fixes: https://dev.openwrt.org/ticket/12642
Signed-off-by: Rafael Gieschke <rafael@gieschke.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36783 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-30 16:01:06 +00:00
7c378bdf02
lantiq: Fix ar8216 switch configuration
...
On linux 3.8 the switch is named as "switch0", but the network configuration script names it as "eth0", causing no communication over ethernet due to no proper VLAN config.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36782 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-30 16:00:59 +00:00
2e43b9adfe
lantiq: DGN3500 support
...
This requires all the preceding patches and finishes support for the
DGN3500, also removing an obsolete file.
Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36781 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-30 16:00:50 +00:00
355ed7111e
lantiq: enable retrieving kernel args from bootloader
...
This patch is a device tree enhancement that IMHO is worthy of mainline.
It allows the bootloader's commandline to be preserved even when the
device tree specifies one.
Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36780 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-30 16:00:42 +00:00
319317b752
lantiq: wifi calibration from MTD
...
This patch enables retrieving the wifi calibration data from an MTD
partition. It requires the previous patch.
Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36779 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-30 16:00:32 +00:00
6e8045c0da
lantiq: postpone PCI and wifi init
...
This postpones the initialization of PCI and wifi until after the MTD
initialization, so that calibration data may be loaded from there.
Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36778 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-30 16:00:24 +00:00
9bfb1223ce
lantiq: fix LED-handling oversights
...
This reassigns the PPPoE status to the LED that was intended to indicate
it, rather than the DSL sync light.
Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36777 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-30 16:00:15 +00:00
c12c2b84a2
ramips: set correct description for rt305x subtarget
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36775 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-30 15:59:56 +00:00
719e33cf00
imx6: add new target
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36753 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-29 01:27:29 +00:00
09920da426
kernel: generic: remove upstream patches for 3.10-rc3 and refresh patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36752 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-29 01:27:27 +00:00
4fb9476dd3
ar71xx: typo in detect TL-MR10U/TL-MR11U
...
At offset 0x40, signature for TL-MR10U/TL-MR11U begin
from 0x00, not 0x10/0x11.
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36727 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-26 16:38:00 +00:00
bdaf03d8e7
ar71xx: fix TL-MR10U usb power
...
MR10U is closer to MR3040 than WR703N. This changes also
enable USB power on GPIO18.
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36726 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-26 16:37:59 +00:00
8f259896d1
kernel: update linux 3.9 to 3.9.4
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36725 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-26 16:02:34 +00:00
590f53b235
kernel: update linux 3.8 to 3.8.13
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36724 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-26 16:02:31 +00:00
ce44afced5
ar71xx: set eth0 mac address to match bottom label of the OM2P LC
...
Signed-off-by: marek@open-mesh.com
CC: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36723 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-26 16:02:29 +00:00
852ce23bd3
ar71xx: add TP-LINK TL-MR10U
...
Small router with 4MB flash, 32MB RAM
http://www.tp-link.com.cn/product_300.html
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36722 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-26 16:02:26 +00:00
1b30b7deeb
generic: ar8216: add port mirroring
...
Tested on Buffalo WZR-600DHP with ar8316 switch. Commands used to mirror both
RX and TX traffic from LAN port 1 to LAN port 4:
$ swconfig dev switch0 set enable_mirror_rx 1
$ swconfig dev switch0 set enable_mirror_tx 1
$ swconfig dev switch0 set mirror_monitor_port 4
$ swconfig dev switch0 set mirror_source_port 1
Signed-off-by: Colin Leitner <colin.leitner@googlemail.com>
Tested-by: Luka Perkov <luka@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36713 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-24 13:10:22 +00:00
ef94887803
ar71xx: disable jffs2 by default, it confuses users since many devices have incompatible eraseblock sizes
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36679 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-21 09:45:46 +00:00
89677a4031
kernel: update 3.9 to 3.9.3
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36676 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-20 16:57:00 +00:00
5afff64049
ar7: drop obsolete 3.3 support
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36674 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-20 12:42:44 +00:00
be1424e13d
ar7: drop obsolete 3.6 support
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36673 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-20 12:42:41 +00:00
0ebb76e17c
ar7: switch to 3.9
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36672 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-20 12:42:38 +00:00
eb8ef4e423
ar7: add support for 3.9
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36671 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-20 12:42:36 +00:00
0b56c9b520
kernel: add some missing symbols/move them to generic
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36670 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-20 12:42:32 +00:00
9f06c0905c
brcm2708: make it boot on revision 2 raspberry pis
...
* update the bootcode.bin to the newest version
- gpu/cpu mem split is now configured through config.txt, so no need
to create more than one sd card image (just edit the config.txt)
- bootcode.bin now supports the never revision 2 raspberry pis
* add a commented prepopulated config.txt for easier config changes
Taken from <https://github.com/Evilpaul/RPi-config >
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36668 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-20 12:07:03 +00:00
3c5635a3aa
kernel: generic: add 3.10-rc1 support
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36663 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-19 18:36:15 +00:00
1427ffb05c
bcm63xx: add 3.9 support
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36660 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-19 18:32:13 +00:00
b8f91d7d3a
bcm63xx: Simplify CFE detection.
...
Check bootloader argument in mtd.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo@openwrt.org: split into two patches, one for detection,
one letting bcm63xxpart use it.]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36659 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-19 18:32:02 +00:00
39dcb9ac44
kernel: update 3.9 to 3.9.2
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36658 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-19 18:31:51 +00:00
2fc4a3e2db
kernel: don't remove of_tables
...
These are needed for OF setup of clocksource, clocks and irqchips.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36657 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-19 11:27:28 +00:00
2af99a1f75
ar71xx: remove the xfrm.h chunk from the unaligned access hacks, it breaks ipsec
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36646 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-17 07:31:00 +00:00
a968eee720
ar71xx: add hard_cfg offset detection for rb2011 support - fixes wlan on some newer devices
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36631 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-13 19:13:33 +00:00
6d845ff838
kernel: add missing PHY ID for an AR8327 switch variant
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36630 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-13 19:13:27 +00:00
c3152edcbd
kernel: move CONFIG_MIPS_SEAD3 to generic
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36617 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-12 21:41:55 +00:00
9b49dd201a
bcm63xx: don't build CRAMFS
...
Don't build the CRAMFS file system module in the kernel, and save some bytes.
No bcm63xx board needs this obsolete file system, neither those ones using
the Redboot bootloader (liveboxes). Thus, there is no need to build it, since it has
been replaced long time ago by squashfs.
Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36616 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-12 21:41:52 +00:00
de0a1ff1be
[brcm63xx] led and buttons support for board DWV-S0
...
Signed-off-by: Gianluca Agliozzo <gianluca05@hotmail.it>
[jogo@openwrt.org: fixup patch so it actually applies]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36615 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-12 21:41:50 +00:00
d7f91f4f5f
bcm63xx: remove defconfig support
...
All boards use uci-defaults, no need to keep defconfig support.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36610 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-12 11:54:38 +00:00
0bfb50c645
kernel: fix CVE-2013-1763 in older kernels
...
Newer kernels were already fixed by upstream.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36607 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-12 10:55:12 +00:00
ec3d195535
ar71xx: set mips16 support, tune cflags for 34kc (works well on MIPS 24K as well, but helps a lot for 34K and 74K)
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36600 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-09 23:32:46 +00:00
966c5dcfa2
kernel: make zlib and lzo modules selectable
...
Fixes building kmod-lib-zlib and kmod-lib-lzo if nothing depends on them.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36592 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-09 20:50:07 +00:00
8a7edb5896
kernel: b53: use correct oops for bcm5365 switch
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36589 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-09 20:01:58 +00:00
c395ac1aef
kernel: allow building zsmalloc as a module again
...
zsmalloc was changed to a bool because of missing exports in the kernel,
but we already export the required symbol, so change it back to tristate.
Closes #13481 .
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36587 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-09 19:19:36 +00:00
17a8d4dd6a
ar71xx: use combined kernel image in the CameoHornet template
...
This allow us to increase the kernel partition size,
and ensures, that the -factory image still usable via
the original interface.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36584 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-08 17:11:10 +00:00
0cd5c030ac
ar71xx: add profile and build image for the RNX-N360RT board
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36582 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-08 17:07:19 +00:00
23ddfd1707
ar71xx: add user-space model detection for the RNX-N360RT board
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36581 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-08 17:07:18 +00:00
32a70e2b5c
ar71xx: add profile and build image for Netgear WNDAP360
...
[juhosg: this has been created from the following patch:
http://patchwork.openwrt.org/patch/3620/ ]
Signed-off-by: Jacek Kikiewicz <jaceq@aol.pl>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36580 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-08 17:03:43 +00:00
583ba00781
ar71xx: add user-space support for Netgear WNDAP360
...
[juhosg: this has been created from the following patch:
http://patchwork.openwrt.org/patch/3620/ ]
Signed-off-by: Jacek Kikiewicz <jaceq@aol.pl>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36579 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-08 17:03:42 +00:00
8de307dc8a
ar71xx: add kernel support for Netgear WNDAP360
...
Here is corrected version (only thing not working are wifi LEDs).
[juhosg: this has been created from the following patch:
http://patchwork.openwrt.org/patch/3620/ ]
Signed-off-by: Jacek Kikiewicz <jaceq@aol.pl>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36578 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-08 17:03:34 +00:00
12a1ab5243
kernel: update linux 3.9 to 3.9.1
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36577 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-08 08:53:55 +00:00
f4c75506c0
kernel: update linux 3.8 to 3.8.12
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36576 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-08 08:53:53 +00:00
0a973ae00d
ar71xx: Fix AP135 partition layout
...
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36575 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-08 08:53:49 +00:00
8a699d1704
lantiq: enable portmaps again and set max port to 2
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36573 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-07 10:58:52 +00:00
e5d66838cf
ramips: drop 3.7 support
...
Signed-off-by; John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36572 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-07 10:58:44 +00:00
3ea1a86b5d
ramips: properly setup the FEATURES variable
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36571 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-07 10:58:30 +00:00
38b02b3b29
ramips: fix memory detection rt5350
...
Signed-off-by: Felix Kaechele <felix@fetzig.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36568 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-06 18:23:56 +00:00
3bc8d0be4a
ramips: enable dsp extensions for rt305x and rt3883
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36567 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-06 16:45:59 +00:00
399d08c624
ramips: fix fypo in ethernet driver rt288x, rt3883
...
Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36565 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-06 16:45:43 +00:00
741c702de8
ramips: Update ARC Freestation profile
...
These devices are actually built around the 8devices Carambola dev board.
ARC FreeStation, Flex mARC, iFlex, and SplitStation devices are
supported with this image, see "ARCFlex Firmware Downloads":
http://www.antennas.com/wiki/index.php?title=ARC-OS_Firmware_Downloads_and_Revision_History
Funnily enough if present the external USB wlan ends up being wlan-0, with the
SoC device being wlan-1.
- Invert port map so special handling of vlan config can be removed.
- Add LED config similar to original ArcOS firmware.
- Add GPIO export for enabling PoE passthrough from ethernet port 0 to port 1
- Get MACs from factory partition.
- Update description to list supported devices.
- Carambola uses RT3050 (not RT3052), though my Carambola CPU
actually reports itself as being an RT3350 while still having
RT3050F markings.
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36564 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-06 16:45:35 +00:00
e38f4ac852
ramips: Support setting active_low in devicetree gpio-export
...
Support setting active_low in devicetree gpio-export.
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36563 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-06 16:45:27 +00:00
59954ad99a
ralink: unbreak uart pinmux handling
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36562 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-06 16:45:20 +00:00
a617b2d1b4
ramips: fix gpio base numbering
...
make banks 0 based to unbreak userland ABI
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36561 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-06 16:45:12 +00:00
0bcc4603d5
ramips: add gpio base properties to dtsi files
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36560 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-06 16:45:04 +00:00
c44f3f93a2
ramips: unbreak rt2880 support
...
Signed-off-by: John Crsipin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36559 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-06 16:44:56 +00:00
4ca4cc465d
ramips: fix DIR-602D1 flash size
...
Fix DIR-620D1 flash size.
Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36558 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-06 16:44:47 +00:00
4d3f16b3ea
ramips: unbreak gpio handling for uart mux group
...
this should fix the handling of corner cases
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36543 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-04 11:36:51 +00:00
9893ab0749
at91: build .dtb file for the CalAmp LMU500 board
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36542 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-03 19:01:00 +00:00
3429191e87
ar71xx: Fix AP135 PCI
...
AP135 has a pluggable PCIE slot unlike AP136.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36541 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-03 19:00:58 +00:00
ebed4991a9
ar71xx: add an external reset callback for ar913x and use it in ath9k - should reduce the frequency of DMA stop failures
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36530 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-03 09:12:19 +00:00
13cd8ba334
kernel: do not strip /proc/net/ip_mr_* in the /proc debloat patch, it is used by iproute2
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36529 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-02 15:59:57 +00:00
1780aae0a8
bcm63xx: split into two subtargets, generic and SMP
...
Make SMP a subtarget, since it only supports BCM6362 and BCM6368.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36527 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-02 15:28:31 +00:00
dec4629f27
bcm63xx: add SMP support for BCM6362 and BCM6368
...
BCM6358 requires further work due to its shared TLB.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36526 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-02 15:28:26 +00:00
a08aa46060
kernel: generic: don't strip /proc/irq on SMP
...
/proc/irq is needed for changing the SMP affinity of interrupts.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36525 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-02 15:28:12 +00:00
67fe3b7ad4
bcm63xx: fix hsspi flash registration for BCM6362
...
Use busnum 1 for HSSPI so it won't conflict on chips having both SPI
controllers.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36524 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-02 15:28:10 +00:00
adf4249894
bcm63xx: fix/enable livebox minipci
...
Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36523 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-02 15:28:07 +00:00
edc084effc
atheros: remove static gpio_request() from board setup and include generic kmod-gpio-button-hotplug instead.
...
This change is based on a patch by Karl Palsson <karlp@remake.is>
See http://patchwork.openwrt.org/patch/3536/ .
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36513 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-02 11:46:53 +00:00
eeea332f33
kernel: update linux 3.8 to 3.8.11
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36507 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-01 22:15:18 +00:00
de1932b8b5
brcm63xx: fix typo and missing BCM6328 check in BCM6345 ethernet patch
...
And while at it, also include a define check for BCM6328, thanks to
Gabor for spotting this.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36506 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-01 21:52:25 +00:00
22008d7ac8
brcm63xx: add missing binary operands to BCM6345 ethernet patch
...
Thanks to Emilio Arias for reporting it.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36505 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-01 21:12:40 +00:00
5bb5c2727c
brcm63xx: remove 3.7 kernel support
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36504 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-01 21:12:26 +00:00
a5e6a230cd
ar71xx: rename WNR2000v3 support patch
...
Update the numbering of kernel patch for supporting
Netgear WNR2000v3 from 617 to 618.
Signed-off-by: yousong <yszhou4tech@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36498 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-30 10:44:11 +00:00
95dbc1ffd3
x86/geos: switch to 3.8.10
...
Compile tested only.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36496 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-30 10:44:09 +00:00
690066c1f3
linux/3.9: implement pcibios_get_phb_of_node for MIPS
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36495 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-30 10:44:08 +00:00
8666a10791
linux/3.8: use backported pcibios_get_phb_of_node patches
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36494 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-30 10:44:07 +00:00
440bb56dc2
kernel: update linux 3.8 to 3.8.10
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36493 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-30 10:43:59 +00:00
4c1da5becf
at91: add missing config symbols
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36492 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-30 10:43:58 +00:00
152d6cd31f
linux/3.{8,9}: add missing symbols
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36491 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-30 10:43:57 +00:00
c067474691
linux/3.{8,9}: turn on CONFIG_NET_SCH_FQ_CODEL
...
It is forced to 'y' since r36342.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36490 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-30 10:43:56 +00:00
7c6b0f4953
ramips: move dlink profile to correct sub folder - 2nd try
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36489 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-30 10:34:20 +00:00
ee51015692
ramips: move dlink profile to correct sub folder
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36487 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-30 08:24:26 +00:00
7c4a6af247
broadcom-diag: support for the WNDR3700v3
...
I recently picked up a WNDR3700 to put OpenWRT on, and only after tearing into the box did I find it
was one of the v3 boards, with poor OpenWRT support. This patch should add the board detection and
LED/button control to the broadcom-diag module, and should generate a netgear .chk image that the
bootloader and stock firmware will accept.
The changes to the broadcom-diag module are more than a few lines because the WNDR3700v3 is driving
its LEDs through an HC164 8-bit shift register.
Signed-off-by: Owen Kirby <osk@exegin.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36482 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-28 21:11:17 +00:00
b603107f02
brcm47xx: use kernel 3.8.10 as default kernel
...
The biggest change with this kernel is a new partition parser.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36480 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-28 18:25:16 +00:00
219ed3f7c1
brcm47xx: add board detection for NETGEAR WNDR4500 V2
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36478 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-28 18:19:31 +00:00
f5095240a5
kernel: fix a memory leak in split_rootfs_data()
...
allocate_partition() copies all the content of dpart into a new struct.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36475 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-28 17:01:56 +00:00
585001781b
kernel: update bcma and ssb for kernel 3.8+ to version from wireless-testing master-2013-04-26.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36473 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-28 16:52:11 +00:00
9aa9b6b482
kernel: update linux 3.9 patches to rc8
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36469 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-28 11:55:23 +00:00
aef5e526c7
kernel: add missing bcma defines and header file for bcrmfmac
...
Fixes build failure when having kmod-mmc and brcmfmac selected.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36468 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-28 11:10:42 +00:00
868412ff3a
ar71xx: add user-space support for WNR2000v3
...
Signed-off-by: Mathieu Olivari <mathieu.olivari@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36461 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-26 17:00:54 +00:00
ac6aa244a8
ar71xx: add profile and build image for WNR2000v3
...
Signed-off-by: Mathieu Olivari <mathieu.olivari@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36460 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-26 17:00:53 +00:00
7902954f83
ar71xx: Add Netgear WNR2000v3 support
...
Network connectivity works fine (LAN and WAN).
For GPIOs, only pwr led and the green wan leds are supported for now.
Signed-off-by: Mathieu Olivari <mathieu.olivari@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36459 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-26 17:00:52 +00:00
484cb57c03
ar71xx: add profile and build image for the TL-WR720N v3 board
...
Signed-off-by: yousong <yszhou4tech@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36458 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-26 17:00:50 +00:00
1d9bb65f14
ar71xx: add user-space support for the TL-WR720N v3 board
...
Signed-off-by: yousong <yszhou4tech@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36457 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-26 17:00:49 +00:00
a50f7b012f
ar71xx: add kernel support for TPLINK WR720N v3
...
Add support for TPLINK WR720N v3 which has 4MB flash,
32MB ram, 2 ethernet interfaces, 1 USB 2.0 port.
The patch is mostly a modification from mach-tl-wr703n.c.
GPIO numbers for the slider switch is from mach-tl-mr3020n.c.
Tested on my device and they worked fine.
Signed-off-by: yousong <yszhou4tech@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36456 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-26 17:00:48 +00:00
3bbeb1b7a1
mpc85xx: Add subtargets Generic and P1020
...
Only difference between Generic and P1020 is that P1020
enables SMP with two CPUs in the kernel config.
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36454 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-26 16:57:43 +00:00
14fec491c7
kernel: update linux 3.8 to 3.8.9
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36453 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-26 16:55:42 +00:00
2105af06d4
at91: upgrade to kernel 3.8.7 and use devicetree
...
This upgrades the AT91 target to 3.8.7, and migrates to device tree.
This allows a single kernel to be built for most at91 variants which
simplifies things quite a bit. The immediate result is that all
subtargets are nuked, and any boards without dts files are no longer
supported, though the target now includes more boards than before. The
adc driver was also nuked as 3.8.7 includes a new one under the IIO
subsystem.
Signed-off-by: Adam Porter <porter.adam@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36452 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-26 16:55:40 +00:00
fd01a68863
ramips: rt3883: fix build error
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36451 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-26 16:55:28 +00:00
8d3add94db
lantiq: make leds and network work on VG3503J
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36445 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-25 19:03:41 +00:00
d23f17e56d
lantiq: fix board detection helpers
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36444 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-25 19:03:37 +00:00
d88043aa65
lantiq: move dts files to thir own folder
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36443 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-25 19:03:32 +00:00
d8d3d5959b
generic: fix rtl8366_smi compile warning
...
drivers/net/phy/rtl8366_smi.c: In function 'rtl8366_sw_set_vlan_ports':
drivers/net/phy/rtl8366_smi.c:1125:6: warning: 'pvid' may be used uninitialized in this function [-Wuninitialized]
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36442 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-25 19:03:29 +00:00
f8a2ed97df
lantiq: disable sw portmaps on xrx200 ethernet as segment solation does not work yet
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36441 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-25 19:03:25 +00:00
bf46e96234
lantiq: make lzma-loader based images for VG3503J
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36440 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-25 19:03:21 +00:00
b40108b0d0
lantiq: update VG3503J.dts to match new partition layout
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36439 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-25 19:03:17 +00:00
c69c086dfb
lantiq: add lzma-loader source
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36438 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-25 19:03:13 +00:00
7cea5ae5de
ramips: remove now unneeded user-space board detection
...
Now that ALL5002 and ALL5003 each got their own DTS and board names, remove
the now no longer needed user-space part which previously differentiated between
ALL5002 and ALL5003.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Patchwork: http://patchwork.openwrt.org/patch/3558/
Acked-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36436 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-25 19:03:05 +00:00
ecff443b65
ramips: introduce DTS for ALL5003
...
Prior to the switch to 3.8, ALL5002 and ALL5003 boards shared mach-all5002.c.
With the change to DTS, this is no longer accurate, as ALL5002 is based on
Rt3352 SoC while ALL5003 is based on Rt5350 SoC, therefore the corresponding
rt5350.dtsi need to be included for ALL5003.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Patchwork: http://patchwork.openwrt.org/patch/3557/
Acked-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36435 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-25 19:03:01 +00:00
e5adedfdd5
ramips: set preinit interface to eth0 by default.
...
This makes any ramips device accessible via ethernet in failsafe mode.
Based on: https://dev.openwrt.org/changeset/36322
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3567/
Acked-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36434 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-25 19:02:57 +00:00
77dd775839
ramips: Add Alpha ASL-26555 support.
...
This board uses a TrendChip SOC with its own RAM/Flash for ADSL support.
We know both SOCs are connected through ethernet and use some kind of protocol for UART communication, but due to the lack of GPL sources we couldn't get it to work. For this reason the network is configured only for LAN.
There are two versions (Chile 8MB and Spain 16MB).
Wiki: http://wiki.openwrt.org/toh/alpha/asl26555
Signed-off-by: Esteban Benito <estebanjbs@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3571/
Acked-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36433 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-25 19:02:53 +00:00
a5c6468744
ramips: Add support of D-link DIR-620D1
...
Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru>
Acked-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36432 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-25 19:02:48 +00:00
de28160be0
ramips: sync kernel patches with the mips-next tree
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36431 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-25 19:02:42 +00:00
9801819da6
preinit: move cmdline failsafe= handling ot the generic code
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36430 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-25 19:02:37 +00:00
50884b75be
bcm63xx: update patches with upstream submissions
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36407 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-23 13:55:36 +00:00
c818e05fef
bcm63xx: switch to linux 3.8
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36406 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-23 13:55:17 +00:00
276de79fca
Change default IPv6 config to enable DHCPv6-PD
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36384 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-22 19:40:16 +00:00
431e5b64bc
kernel: allow __netdev_alloc_skb_ip_align to be called with dev = NULL
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36378 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-22 15:01:36 +00:00
a6503733c9
ar71xx: merge more unaligned access hacks from cerowrt-next
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36374 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-22 12:53:21 +00:00
db175c1d34
kernel: backport SSB/BCMA changes in preparation for a compat-wireless update
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36367 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-19 12:39:40 +00:00
927a2d3057
linux/3.9: add missing config symbol
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36365 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-19 08:07:38 +00:00
90ead29604
linux/3.[89]: update bridge_remove_ipv6_dependency patch
...
Fixes the following warning:
CC [M] net/ipv6/addrconf.o
net/ipv6/addrconf.c: In function 'addrconf_init':
net/ipv6/addrconf.c:4944:2: warning: assignment from incompatible pointer type [enabled by default]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36364 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-19 08:07:37 +00:00
5afe312fc7
kernel: update linux 3.8 to 3.8.8
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36363 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-19 08:07:34 +00:00
ab8468d344
build: consistently use 'depends on' instead of 'depends'
...
make the syntax more compatible with kernel menuconfig
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36351 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-17 15:36:41 +00:00
1b240db985
[ramips] fix prepare_generic_squashfs
...
prepare_generic_squashfs was called twice on the generated images breaking mount_root
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36349 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-17 11:54:09 +00:00
270bb2883c
[ramips] fix rt305x gpio
...
https://dev.openwrt.org/ticket/13359
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36343 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-16 06:58:18 +00:00
58a4084d28
kernel: force CONFIG_NET_SCHED=y for fq_codel ( #13360 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36342 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-15 20:40:29 +00:00
b5b7a2db8b
[generic/3.9]: refresh against -rc7
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36340 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-15 16:10:01 +00:00
9198c2f4ab
kernel: update linux 3.8 to 3.8.7
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36332 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-14 09:25:53 +00:00
988e72c790
mpc85xx: use static SPI bus number for TL-WDR4900
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36329 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-12 19:44:41 +00:00
b3b8aaa3b1
linux/3.8: backport 'spi/of: Use DT aliases for assigning bus number' from 3.9
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36328 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-12 19:44:38 +00:00
b4c6d84f6d
[ramips] update rt2880 config-3.8
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36327 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-12 18:57:01 +00:00
9b50a884df
[ramips] fix up the rt2880 patches
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36326 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-12 18:56:53 +00:00
49a6ad0207
[ramips] fix RT-N15 support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36325 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-12 18:56:44 +00:00
147e52a665
[ramips] update rt2880.dtsi
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36324 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-12 18:56:36 +00:00
d8aae3517b
[geneirc] fix rtl8366s OF binding
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36323 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-12 18:56:05 +00:00
bb114efbc8
mpc85xx: set preinit interface to eth0 by default
...
This makes the WDR4900 accessible via ethernet in
failsafe mode.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36322 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-12 18:30:25 +00:00
0010d80ea9
mpc85xx: Generate fdt for P1020RDB
...
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36321 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-12 18:30:24 +00:00
61ed0ce571
mpc85xx: Add P1020RDB board support
...
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36320 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-12 18:30:22 +00:00
0aa4ffad7a
[lantiq] add VG3503J support
...
this adds basic support. the bootloader on these units is locked down.
until we have a replacement we can do basic testing with these env variables in uboot.
set update_openwrt erase 0xb0020000 0xb073ffff \;tftp 0x81000000 openwrt-lantiq-xway-VG3503J-squashfs.image\;cp.b 0x81000000 0xb0020000 \$(filesize)
set bootcmd cp.b 0xb0020000 0x80002000 0x400000\; go 0x80002000
unfortunatley the bootloader ignores the bootcmd, so autobooting is not possible yet. you need to call "run bootcmd" by hand after each power cycle.
please note that the vdsl firmware is non redistributable. you can find it in the GPL drop that BT provides.
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36315 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-11 19:18:07 +00:00
5bb33bd0cf
[lantiq] add FE phy firmware
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36314 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-11 19:17:48 +00:00
ce4da1634d
[lantiq] add missing pinmux patch
...
Fix lantiq pinmux which affected PCI and USB.
Known affected boards are: ARV4518 and ARV7518.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36312 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-11 07:12:37 +00:00
47ffc8ff86
cns3xxx: fix USB ehci/ohci platform driver
...
Update ehci/ohci driver registration to conform to the new platform
drivers.
This fixes missing USB host support in 3.8.x
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36309 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-10 16:20:50 +00:00
d72b418346
kernel: calibrate the TWD timer even when booting with only one CPU, it is used for the watchdog timer base
...
Fixes booting on single-core CNS3xxx devices
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36308 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-10 16:07:50 +00:00
89cca284e2
kernel: keep the igmp proc support even with PROC_STRIPPED, some tools still use it
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36307 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-10 13:45:12 +00:00
87f078aee9
kernel: switch default qdisc from pfifo_fast to fq_codel and remove pfifo_fast
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36304 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-10 13:11:29 +00:00
494a34245d
kernel: keep dropped stats in fq_codel
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36303 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-10 13:11:25 +00:00
967b13d79b
kernel: tune fq_codel defaults for common netdevice speeds
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36302 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-10 13:11:21 +00:00
10e97fe11f
kernel: add patches by Dave Täht to reduce buffer size in longer queues to reduce memory pressure
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36301 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-10 13:11:16 +00:00
f79b8bc0ec
kernel: refresh patches against 3.9-rc6
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36297 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-09 16:16:20 +00:00
7251e4fdeb
kernel: add support for PMC PM25LQ032 SPI Flash in m25p80.c
...
Add support for PMC PM25LQ032 (4MB) SPI Flash used in Hame MPR-A1 and clones.
Signed-off-by: Michel Stempin <michel.stempin@wanadoo.fr>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36296 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-09 16:16:16 +00:00
5a27c63705
kernel: backport switch user API changes after r36283
...
3.3 and 3.6 kernels do not make use of the UAPI headers, still they need
to provide an up-to-date switch.h copy for swconfig to build.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36295 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-09 15:47:01 +00:00
7b7317fc25
[ramips] unbreak portmapping - typo fix
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36293 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-09 14:39:01 +00:00
ffaccbaa81
[ramips] move memory detect node to dtsi files
...
Signed-of-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36290 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-09 14:19:36 +00:00
77a28db429
[ramips] Add Netgear WNCE2001 (OF version)
...
Add Netgear WNCE2001.
This is a small RT3052 device with 4MB spi flash and 32MB ram.
2 built-in antennas, 1x fastE, no USB, reset & wps switch.
On my model the AP/RT switch is unpopulated, but I verified the gpio
mapping for it.
The stock firmware is running an unprotected tftpd which allows you
to read any file from the filesystem.
Serial port is present on testpads (See image on the wiki page).
There are more testpads below the shield near the SoC, which
may have JTAG.
Slight annoyance: The bootloader is checksumming kernel&rootfs, but
can be tricked by zeroing checksum and length fields in the checksum
partition, see
target/linux/ramips/base-files/lib/preinit/04_disable_wnce2001_flash_checksumming
The manufacturer image is very similar to the DAP one, so I slightly
modified mkdapimg to support generating it.
The resulting
openwrt-ramips-rt305x-wnce2001-squashfs-factory-(worldwide|northamerica).bin
can be used to flash from stock to OpenWRT using the stock firmware
upgrade function, without using the serial port.
http://www.netgear.com/landing/wnce2001.aspx
http://wiki.openwrt.org/toh/netgear/wnce2001
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36289 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-09 14:19:33 +00:00
e61b526322
[ramips] remove bootargs from dts
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36288 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-09 14:19:28 +00:00
8fb3d4d8cf
[ramips] add ofpart info to the devicetrees
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36287 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-09 14:19:24 +00:00
6b65168cf8
[ramips] add sample swconfig portmap
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36286 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-09 14:19:20 +00:00
98f2fc0ea1
[ramips] set of_node before registring the switch
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36285 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-09 14:19:17 +00:00
3dc6fbf96d
[swconfig] allow loading port maps from OF
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36283 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-09 14:19:09 +00:00
4c9003ffc7
Adapt default network configuration for IPv6
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36278 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-09 08:03:08 +00:00
42e7765d34
ramips: TEW-691GR.dts fixes
...
* fix pinmux settings
* remove spi node
* add nor-flash node
* enable mdio-bus and add phy handle
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36276 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-08 12:34:17 +00:00
3d035c5be5
ramips: rt3883: enable the AR8216 driver
...
It is needed for the TEW-69{1,2}GR boards.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36275 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-08 12:34:15 +00:00
67f2b85c8b
ramips: add profile for the Omnima EMB-HPM board
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36274 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-08 11:12:04 +00:00
409d825847
ramips: OMNI-EMB-HPM.dts fixes
...
* add mdio-bus and phy nodes
* set phy-handle for the ethernet node
* define flash partiions
* cleanup flash node properties
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36273 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-08 11:12:03 +00:00
c9bcd064dd
ramips: add mdio-bus node to rt3883.dtsi
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36272 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-08 11:12:02 +00:00
c0a94a3105
ramips: fix MDIO/PHY handling
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36271 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-08 11:12:01 +00:00
ed8fffd327
ramips: fix console speed for OMNI-EMB-HPM
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36270 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-08 08:24:51 +00:00
d515b9e7c7
ramips: avoid invalid pointer dereference in pinmux code
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36269 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-08 08:24:50 +00:00
ee9470c508
ramips: TEW-692GR.dts fixes
...
* fix pinmux settings
* remove spi node
* add PCI node
* add nor-flash node
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36268 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-08 07:11:35 +00:00
04b9580dba
ramips: add PCI node into RTN56U.dts
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36264 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-07 20:56:22 +00:00
170c3c34d7
ramips: add PCI node for rt3883.dtsi
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36263 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-07 20:56:21 +00:00
9a5ee56a33
ramips: rt3883: enable PCI support
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36262 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-07 20:56:20 +00:00
c797fdfb4d
ramips: fix RT3883 PCI driver
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36261 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-07 20:56:18 +00:00
2ea7a39705
ramips: refresh patches
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36260 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-07 17:05:05 +00:00
95f88d23c0
ramips: add missing cpu-feature-override.h files
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36259 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-07 17:05:04 +00:00
24a761dac1
ramips: fix broken patch name
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36258 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-07 16:26:27 +00:00
d16801822a
ramips: fix polarity of GPIO buttons for RT-N56U
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36257 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-07 16:24:33 +00:00
941539cb04
x86/generic: remove old kernel configs
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36256 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-07 15:53:17 +00:00
b7a4639384
x86/generic: switch to 3.8
...
Only tested within a VM.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36255 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-07 15:53:15 +00:00
da00d19b24
x86/generic: add config for 3.8
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36254 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-07 15:53:13 +00:00
c2c4190a24
x86/alix2: remove old kernel configs
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36253 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-07 15:53:11 +00:00
9e8a9a0cc9
x86/alix2: switch to 3.8
...
Tested on an alix2d13 board.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36252 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-07 15:53:09 +00:00
c62a2a7fb8
x86/alix2: add config for 3.8
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36251 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-07 15:53:08 +00:00
eb343829ba
x86: add support for 3.8
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36250 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-07 15:53:05 +00:00
ae97f7ac24
ramips: add nor-flash node for the RT-N56U
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36249 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-07 14:46:11 +00:00
ba1f5717e8
ramips: fix pinmux settings for the RT-N56U
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36248 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-07 14:46:10 +00:00
c2751b8502
ramips: pinmux fixes
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36247 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-07 14:46:09 +00:00
c79885c667
ramips: remove trailing whitespaces from dts files
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36246 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-07 13:32:37 +00:00
2ae68184a8
ramips: handle PCI interrupts in plat_irq_dispatch
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36245 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-07 13:25:38 +00:00
319f0d0a6e
[ramips] fix typos inside dts files
...
Signed-off-by; Tobias Diedrick <ranma@tdiedrich.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36244 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-07 11:47:03 +00:00
695fe3d0ed
[ramips] fix default commandline in dts files
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36243 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-07 11:46:54 +00:00
00d4fe79c0
ramips: add cfi_cmdset_0002 patches
...
The parallel flash access on the RT-N56U is broken
without those patches.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36242 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-07 11:37:15 +00:00
d9d6fd3f5d
cns3xxx: remove the watchdog IRQ from the resources, it breaks the driver init and is useful only for testing
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36241 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-07 11:24:30 +00:00
ec4901457c
ramips: remove top-level {address,size}-cells properties from .dts files
...
Those are defined in the SoC specific .dtsi files.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36237 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-07 08:19:10 +00:00
94d356b7e1
brcm47xx: use old partition names again for kernel 3.8
...
This fixes sysupgrade. The partition names are used all over the Internet in various howtos.
Thank you russell for spotting this problem.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36235 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-06 22:22:26 +00:00
825fbbb900
brcm47xx: fix error in board detection when nvram is not available.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36234 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-06 19:02:25 +00:00
381a78c7e8
linux/3.8: implement pcibios_get_phb_of_node for MIPS
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36233 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-06 17:33:03 +00:00
9f4f28c91e
linux/3.8: backport devm_ioremap_resource from 3.9
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36232 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-06 17:33:00 +00:00
751af09d01
ramips: fix ethernet switch node in DIR-645.dts
...
Fix a typo in the node name and add vendor prefix
for the compatible string.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36231 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-06 17:19:35 +00:00
0a676cdd01
generic: rtl8367: add compatible string with vendor prefix
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36230 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-06 17:19:31 +00:00
37e86c353c
generic: rtl8367b: fix rtl8367b_extif_init_of
...
* disable external interface if its property is not present
* show an error message if the extif property is not valid
* use proper error values intead of -1
* fix memory leak
* wrap long lines
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36229 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-06 17:03:09 +00:00
c0a72756c4
linux/3.8: add more missing symbols
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36228 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-06 16:56:47 +00:00
5eab2bb70b
linux/3.8: add missing symbol
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36226 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-06 16:38:36 +00:00
4cd0e6b487
ramips: remove spi node from RTN56.dts
...
The RT-N56U board uses a parallel flash.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36223 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-06 12:37:40 +00:00
d4b5e559db
ramips: fix ethernet switch node in RTN56U.dts
...
The RT-N56U uses an RTL8367M switch.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36222 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-06 12:37:38 +00:00
64dd914158
ramips: rt3883: enable the RTL8367 driver
...
That is needed by the Asus RT-N56U board.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36221 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-06 12:37:37 +00:00
4455e17963
generic: rtl8367: allow to load extif config from OF
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36220 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-06 12:37:36 +00:00
d705fd0c51
generic: rtl8367: fix a typo in MODULE_DEVICE_TABLE macro
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36219 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-06 12:37:34 +00:00
b2b815c577
generic: rtl8367: add vendor prefix to the compatible string
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36218 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-06 12:37:32 +00:00
764f64149b
ramips: rt3883: sync 3.8 config
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36217 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-06 12:37:31 +00:00
fa10e8a31a
[ramips] fix typo pinmmux -> pinmux
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36216 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-06 11:46:34 +00:00
67dfec2fa8
kernel: update linux 3.8 to 3.8.6
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36215 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-06 11:40:44 +00:00
049b5f3748
refresh kernel configs with kconfig.pl
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36214 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-06 11:40:41 +00:00
7870e47cc0
[ramips] fix dir-615 h1 network config
...
http://patchwork.openwrt.org/patch/3527/
Signed-off-by: Daniel Petre <dani@ip6.ro>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36213 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-05 23:37:45 +00:00
ed6c67ec18
[ramips] fix typo that made gpiomuxing fail
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36212 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-05 23:10:42 +00:00
bc6e64b326
malta: add le64 and be64 sub targets
...
These two subtargets are used to build a 64-bit malta kernel along with
64-bit userland support.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36211 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-05 12:36:48 +00:00
2fec7702df
malta: move 32-bits options to subtarget config
...
Preliminary change to add support for MIPS64-based malta subtargets.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36210 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-05 12:36:45 +00:00
b88f444428
malta: move endianness kernel configuration to subtarget
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36209 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-05 12:36:41 +00:00
070c70f3e0
malta: enable mips16 feature flag
...
The malta platform supports mips16 advertise this feature flag.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36203 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-05 12:36:16 +00:00
0f8a260d4b
[lantiq] Migrate lantiq platform to common led helper functions
...
http://patchwork.openwrt.org/patch/3316/
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36187 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-03 10:01:07 +00:00
f73f19c966
[lantiq] add a missing patch that makes board detection work again
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36186 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-03 10:01:03 +00:00
c0d814a55f
[kernel] Patch for invoking (pre)init
...
http://patchwork.openwrt.org/patch/3485/
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36183 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-03 10:00:50 +00:00
381db32e2c
[ramips] add profile for tenda w150m board
...
http://patchwork.openwrt.org/patch/3371/
Signed-off-by: Chi Zhang <zhangchi866@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36176 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-03 10:00:21 +00:00
37b08bf005
[ramips] fix ALL5002 default package selection
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36175 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-03 10:00:16 +00:00
3e76a10173
[ramips] Build WW factory image for DAP-1350
...
http://patchwork.openwrt.org/patch/3466/
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36174 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-03 10:00:12 +00:00
12e2a6d321
[ramips] add Huawei D105
...
http://patchwork.openwrt.org/patch/3510/
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36173 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-03 10:00:08 +00:00
6e4120f245
[ramips] add profile for the Edimax 3g-6200NL board
...
http://patchwork.openwrt.org/patch/3214/
Signed-off-by: Cédric Le Moing <cedric.le-moing@laposte.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36172 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-03 10:00:03 +00:00
dfd8fe4f2d
[ramips] there is no ttyS1 console
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36171 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-03 09:59:59 +00:00
209682186d
[ramips] make v3.8 the default
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36170 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-03 09:59:55 +00:00
34e756e5c2
[ramips] add new image/Makefile
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36169 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-03 09:59:51 +00:00
8c64c84a1e
[ramips] add the dts files that describe the boards in future
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36168 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-03 09:59:46 +00:00
e97253bd46
[ramips] fix upvel profile names
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36167 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-03 09:59:41 +00:00
485fd1d19a
[ramips] fix rt3883 config-3.8
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36166 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-03 09:59:37 +00:00
800132d77e
[ramips] fix rt305x config-3.8
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36165 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-03 09:59:33 +00:00
35a588e59e
[ramips] mark rt288x broken until the test hardware arrives in the mail
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36164 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-03 09:59:16 +00:00
6bb6cbe600
[ramips] add patches for v3.8
...
Signed-off-by: John Crsipin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36163 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-03 09:59:10 +00:00
cf9b57476d
[ramips] remove old ralink 3.8 patches
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36162 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-03 09:58:48 +00:00
84238ad24d
[ramips] move files to files-3.7
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36161 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-03 09:58:44 +00:00
fd1af44d07
[ramips] add feature gpio
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36160 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-03 09:58:37 +00:00
927f4ae6ec
[generic] add OF support to rtl8367b driver
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36159 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-03 09:58:33 +00:00
0f59629a24
[generic] make firmware loading work on v3.9
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36158 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-03 09:58:28 +00:00
5bb74fd269
mpc85xx: enable ath9k and wpad-mini by default
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36142 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-01 09:53:29 +00:00
349255c8d1
brcm47xx: generate images for Linksys E.... models
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36139 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-27 15:51:28 +00:00
816d91335b
gemini: remove usage of ehci_port_power() it was removed in kernel 3.8
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36138 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-27 15:48:07 +00:00
400d0de831
brcm47xx: activate image generation for some Netgear devices which are on the market and should be supported.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36137 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-27 15:35:52 +00:00
03e9d50168
brcm47xx: generate images for more WRT...N models
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36136 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-27 15:34:55 +00:00
d1d59cf7e0
[gemini]: upgrade to 3.9-rc4, disable unsupported boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36128 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-25 14:18:32 +00:00
88c5f2bfbd
[generic/3.9]: refresh patches against -rc4
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36127 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-25 13:53:48 +00:00
a95842d490
[generic/3.9]: add missing symbols
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36126 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-25 13:53:17 +00:00
9dcc5a385b
ar71xx: fix ethernet LEDs on the TL-WDR3500
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36122 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-25 06:40:03 +00:00
a7b9cbd468
ar71xx: add GPIO output select values for AR934x
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36121 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-25 06:40:00 +00:00
ec437235a4
ar71xx: add default LED configuration for the WL-WRD3500
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36120 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-24 21:07:21 +00:00
63d557f83b
ar71xx: fix USB power GPIO on the TL-WDR3500
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36119 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-24 19:23:47 +00:00
8a0c278427
ar71xx: remove numeric suffix of the TL-WDR3500 USB LED
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36118 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-24 19:23:45 +00:00
30eb450d54
ar71xx: add diag support for the TL-WDR3500
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36117 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-24 19:23:43 +00:00
b039fcf6a6
ar71xx: add default switch configuration for the TL-WDR3500
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36116 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-24 19:23:36 +00:00
9a587eb82e
kernel: add missing config options for au1000 target
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36115 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-24 14:01:38 +00:00
c697edaab2
kernel: add missing CONFIG_BLK_DEV_IDE_AU1XXX config option.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36102 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-21 14:56:04 +00:00
da8dfca256
kernel: REGMAP_SPI should only be selectable when SPI_MASTER is selected
...
This was turned from a silent confg option without a text to a normal
config option which could be selected without any other option
depending on this. This could cause the situation where REGMAP_SPI was
selected without SPI_MASTER being selected.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36101 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-21 14:50:59 +00:00
0314910b37
brcm47xx: generate images for some more devices
...
These devices should be supported by trunk now.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36099 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-20 22:01:18 +00:00
0efdcebf5d
kernel: add some fixes for kernel 3.9
...
This patch fixes some compile problems with kernel 3.9 and adds some missing linux 3.9 handling into kernel packages.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36098 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-20 21:59:24 +00:00
af64f497a3
kernel: add some missing config options for kernel 3.9
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36097 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-20 21:53:51 +00:00
2b78201a90
kernel: make SND_COMPRESS_OFFLOAD symbol visible for selection ( #13193 )
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36091 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-19 14:13:39 +00:00
4f925948b1
uml: remove 3.6 kernel patches
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36080 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-17 19:47:04 +00:00
ad8be074e3
uml: remove 3.3. kernel patches
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36079 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-17 19:46:59 +00:00
bad07a0699
uml: switch to 3.8 kernel
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36078 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-17 19:46:54 +00:00
6cc4256076
uml: add support for 3.8 kernel
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36077 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-17 19:46:49 +00:00
2c39c0cdbd
uml: remove 3.2 patches
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36076 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-17 19:46:43 +00:00
27513dcee7
ep93xx: switch to 3.8 kernel
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36075 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-17 19:46:37 +00:00
e4dd05ab0b
kernel: refresh 3.9 patches
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36074 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-17 19:46:32 +00:00
92d396ae44
ep93xx: add support for 3.8 kernel
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36073 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-17 19:46:25 +00:00
567013758d
ep93xx: account for sound soc directory rename in 3.7
...
sound/soc/ep93xx -> sound/soc/cirrus
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36071 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-17 19:45:55 +00:00
d7bb11285d
kernel: set regmap-core module license
...
Fixes the following issues:
[ 7.660000] regmap_core: module license 'unspecified' taints kernel
[ 7.690000] Disabling lock debugging due to kernel
[ 7.700000] regmap_core: Unknown symbol lzo1x_decompress_safe (err 0
[ 7.710000] regmap_core: Unknown symbol lzo1x_1_compress (err 0
[ 7.720000] regmap_core: Unknown symbol devres_add (err 0
[ 7.730000] regmap_core: Unknown symbol debugfs_create_bool (err 0
[ 7.750000] regmap_core: Unknown symbol devres_alloc (err 0
[ 7.760000] regmap_core: Unknown symbol debugfs_remove_recursive (err 0
[ 7.770000] regmap_core: Unknown symbol debugfs_create_file (err 0
[ 7.780000] regmap_core: Unknown symbol devres_free (err 0
[ 7.800000] regmap_core: Unknown symbol devres_find (err 0
[ 7.810000] regmap_core: Unknown symbol debugfs_create_dir (err 0)
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36070 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-17 19:45:48 +00:00
365eb27ba4
au1000: remove support for 3.3. kernel
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36067 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-17 14:33:47 +00:00
45acb1fd6f
au1000: switch to 3.6 kernel
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36066 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-17 14:33:41 +00:00
Jonas Gorski
Felix Fietkau
Zoltan HERPAI
John Crispin
Luka Perkov
Hauke Mehrtens
Florian Fainelli
Gabor Juhos
Imre Kaloz
Steven Barth
Jo-Philipp Wich