ralink: update patches
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37016 3c298f89-4303-0410-b956-a3cf2f4a3e73master
John Crispin
parent
21ee9d504d
commit
5f6caa26e5
|
|
@ -9,11 +9,11 @@ include $(TOPDIR)/rules.mk
|
|||
ARCH:=mipsel
|
||||
BOARD:=ramips
|
||||
BOARDNAME:=Ralink RT288x/RT3xxx
|
||||
SUBTARGETS:=rt288x rt305x rt3883
|
||||
SUBTARGETS:=rt288x rt305x rt3883 mt7620a
|
||||
CFLAGS:=-Os -pipe -fno-caller-saves -mno-branch-likely
|
||||
FEATURES:=squashfs gpio
|
||||
|
||||
LINUX_VERSION:=3.8.13
|
||||
LINUX_VERSION:=3.9.6
|
||||
|
||||
include $(INCLUDE_DIR)/target.mk
|
||||
DEFAULT_PACKAGES+=\
|
||||
|
|
|
|||
|
|
@ -72,7 +72,10 @@
|
|||
status = "okay";
|
||||
|
||||
mtd-mac-address = <&factory 0x28>;
|
||||
ralink,fixed-link = <1000 1 1 1>;
|
||||
port@0 {
|
||||
ralink,fixed-link = <1000 1 1 0>;
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
wmac@10180000 {
|
||||
|
|
@ -125,14 +128,16 @@
|
|||
};
|
||||
};
|
||||
|
||||
gpio_export {
|
||||
compatible = "gpio-export";
|
||||
#size-cells = <0>;
|
||||
usb0: gpio-regulator {
|
||||
compatible = "regulator-gpio";
|
||||
|
||||
usb {
|
||||
gpio-export,name = "usb";
|
||||
gpio-export,output = <1>;
|
||||
gpios = <&gpio1 6 0>;
|
||||
};
|
||||
regulator-type = "voltage";
|
||||
regulator-name = "usb-power";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-boot-on;
|
||||
|
||||
enable-active-high;
|
||||
enable-gpio = <&gpio1 6 0>;
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -54,7 +54,9 @@
|
|||
ethernet@400000 {
|
||||
status = "okay";
|
||||
|
||||
ralink,fixed-link = <1000 1 1 1>;
|
||||
port@0 {
|
||||
ralink,fixed-link = <1000 1 1 1>;
|
||||
};
|
||||
};
|
||||
|
||||
wmac@480000 {
|
||||
|
|
|
|||
|
|
@ -72,15 +72,16 @@
|
|||
status = "okay";
|
||||
};
|
||||
|
||||
gpio-export {
|
||||
compatible = "gpio-export";
|
||||
poe: gpio-regulator {
|
||||
// Used to enable power-over-ethernet passthrough from port0 to port1.
|
||||
// Disable passthrough by default to prevent accidental equipment damage.
|
||||
poe {
|
||||
gpio-export,name = "poe-passthrough";
|
||||
gpio-export,output = <1>; // OUT_INIT_HIGH
|
||||
gpios = <&gpio0 11 1>; // GPIO 11, ACTIVE_LOW
|
||||
};
|
||||
compatible = "regulator-gpio";
|
||||
|
||||
regulator-name = "poe-power";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
|
||||
enable-gpio = <&gpio0 12 0>;
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
|
|
|
|||
|
|
@ -103,19 +103,27 @@
|
|||
};
|
||||
};
|
||||
|
||||
gpio_export {
|
||||
compatible = "gpio-export";
|
||||
#size-cells = <0>;
|
||||
usb0: gpio-regulator {
|
||||
compatible = "regulator-gpio";
|
||||
|
||||
usb {
|
||||
gpio-export,name = "usb";
|
||||
gpio-export,output = <1>;
|
||||
gpios = <&gpio0 7 0>;
|
||||
};
|
||||
root_hub {
|
||||
gpio-export,name = "root_hub";
|
||||
gpio-export,output = <1>;
|
||||
gpios = <&gpio0 12 0>;
|
||||
};
|
||||
regulator-name = "usb0-power";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-boot-on;
|
||||
|
||||
enable-active-high;
|
||||
enable-gpio = <&gpio0 7 0>;
|
||||
};
|
||||
|
||||
hub0: gpio-regulator {
|
||||
compatible = "regulator-gpio";
|
||||
|
||||
regulator-name = "hub0-power";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-boot-on;
|
||||
|
||||
enable-active-high;
|
||||
enable-gpio = <&gpio0 12 0>;
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -0,0 +1,127 @@
|
|||
/dts-v1/;
|
||||
|
||||
/include/ "mt7620a.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "ralink,mt7620a-eval-board", "ralink,mt7620a-soc";
|
||||
model = "Ralink MT7620a + MT7610e evaluation board";
|
||||
|
||||
memory@0 {
|
||||
reg = <0x0 0x2000000>;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,57600";
|
||||
};
|
||||
|
||||
palmbus@10000000 {
|
||||
sysc@0 {
|
||||
ralink,pinmux = "spi", "uartlite", "mdio", "wled", "ephy", "rgmii1", "rgmii2";
|
||||
ralink,gpiomux = "i2c", "jtag";
|
||||
ralink,uartmux = "gpio";
|
||||
ralink,wdtmux = <1>;
|
||||
};
|
||||
|
||||
gpio0: gpio@600 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
spi@b00 {
|
||||
status = "okay";
|
||||
|
||||
m25p80@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "en25q64";
|
||||
reg = <0 0>;
|
||||
linux,modalias = "m25p80", "en25q64";
|
||||
spi-max-frequency = <10000000>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0 0x30000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@30000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0x30000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
factory: partition@40000 {
|
||||
label = "factory";
|
||||
reg = <0x40000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@50000 {
|
||||
label = "firmware";
|
||||
reg = <0x50000 0x7b0000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ethernet@10100000 {
|
||||
status = "okay";
|
||||
|
||||
port@4 {
|
||||
compatible = "lantiq,mt7620a-gsw-port", "ralink,eth-port";
|
||||
reg = <4>;
|
||||
phy-mode = "rgmii";
|
||||
phy-handle = <&phy4>;
|
||||
};
|
||||
|
||||
port@5 {
|
||||
compatible = "lantiq,mt7620a-gsw-port", "ralink,eth-port";
|
||||
reg = <5>;
|
||||
phy-mode = "rgmii";
|
||||
phy-handle = <&phy5>;
|
||||
};
|
||||
|
||||
mdio-bus {
|
||||
status = "okay";
|
||||
|
||||
phy4: ethernet-phy@4 {
|
||||
reg = <4>;
|
||||
phy-mode = "rgmii";
|
||||
};
|
||||
|
||||
phy5: ethernet-phy@5 {
|
||||
reg = <5>;
|
||||
phy-mode = "rgmii";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
gsw@10110000 {
|
||||
status = "okay";
|
||||
ralink,port4 = "gmac";
|
||||
};
|
||||
|
||||
sdhci@10130000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
pcie@10140000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
gpio-keys-polled {
|
||||
compatible = "gpio-keys";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
poll-interval = <20>;
|
||||
s2 {
|
||||
label = "S2";
|
||||
gpios = <&gpio0 1 1>;
|
||||
linux,code = <0x100>;
|
||||
};
|
||||
s3 {
|
||||
label = "S3";
|
||||
gpios = <&gpio0 2 1>;
|
||||
linux,code = <0x101>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -131,19 +131,28 @@
|
|||
};
|
||||
};
|
||||
|
||||
gpio_export {
|
||||
compatible = "gpio-export";
|
||||
#size-cells = <0>;
|
||||
/* gpio 12 and 13 handle the OC input */
|
||||
usb0 {
|
||||
gpio-export,name = "usb0";
|
||||
gpio-export,output = <1>;
|
||||
gpios = <&gpio0 2 0>;
|
||||
};
|
||||
usb1 {
|
||||
gpio-export,name = "usb1";
|
||||
gpio-export,output = <1>;
|
||||
gpios = <&gpio0 1 0>;
|
||||
};
|
||||
/* gpio 12 and 13 handle the OC input */
|
||||
usb0: gpio-regulator {
|
||||
compatible = "regulator-gpio";
|
||||
|
||||
regulator-name = "usb0-power";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-boot-on;
|
||||
|
||||
enable-active-high;
|
||||
enable-gpio = <&gpio0 2 0>;
|
||||
};
|
||||
|
||||
usb1: gpio-regulator {
|
||||
compatible = "regulator-gpio";
|
||||
|
||||
regulator-name = "usb1-power";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-boot-on;
|
||||
|
||||
enable-active-high;
|
||||
enable-gpio = <&gpio0 1 0>;
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -54,7 +54,9 @@
|
|||
ethernet@400000 {
|
||||
status = "okay";
|
||||
|
||||
ralink,fixed-link = <1000 1 1 1>;
|
||||
port@0 {
|
||||
ralink,fixed-link = <1000 1 1 1>;
|
||||
};
|
||||
};
|
||||
|
||||
wmac@480000 {
|
||||
|
|
|
|||
|
|
@ -31,7 +31,9 @@
|
|||
ethernet@10100000 {
|
||||
status = "okay";
|
||||
|
||||
ralink,fixed-link = <1000 1 1 1>;
|
||||
port@0 {
|
||||
ralink,fixed-link = <1000 1 1 1>;
|
||||
};
|
||||
};
|
||||
|
||||
pci@10140000 {
|
||||
|
|
|
|||
|
|
@ -30,9 +30,10 @@
|
|||
|
||||
ethernet@10100000 {
|
||||
status = "okay";
|
||||
phy-handle = <&phy0>;
|
||||
phy-mode = "rgmii";
|
||||
|
||||
port@0 {
|
||||
phy-handle = <&phy0>;
|
||||
phy-mode = "rgmii";
|
||||
};
|
||||
mdio-bus {
|
||||
status = "okay";
|
||||
|
||||
|
|
|
|||
|
|
@ -30,8 +30,17 @@
|
|||
|
||||
ethernet@10100000 {
|
||||
status = "okay";
|
||||
ralink,phy-mask = <0x1>;
|
||||
phy-mode = "rgmii";
|
||||
port@0 {
|
||||
phy-handle = <&phy0>;
|
||||
phy-mode = "rgmii";
|
||||
};
|
||||
mdio-bus {
|
||||
status = "okay";
|
||||
|
||||
phy0: ethernet-phy@0 {
|
||||
reg = <0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
pci@10140000 {
|
||||
|
|
|
|||
|
|
@ -53,7 +53,9 @@
|
|||
ethernet@400000 {
|
||||
status = "okay";
|
||||
|
||||
ralink,fixed-link = <100 1 1 1>;
|
||||
port@0 {
|
||||
ralink,fixed-link = <1000 1 1 1>;
|
||||
};
|
||||
};
|
||||
|
||||
wmac@480000 {
|
||||
|
|
|
|||
|
|
@ -102,14 +102,14 @@
|
|||
status = "okay";
|
||||
};
|
||||
|
||||
gpio_export {
|
||||
compatible = "gpio-export";
|
||||
#size-cells = <0>;
|
||||
usb0: gpio-regulator {
|
||||
compatible = "regulator-gpio";
|
||||
|
||||
usb {
|
||||
gpio-export,name = "usb";
|
||||
gpio-export,output = <0>;
|
||||
gpios = <&gpio0 11 0>;
|
||||
};
|
||||
regulator-name = "usb0-power";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-boot-on;
|
||||
|
||||
enable-gpio = <&gpio0 11 0>;
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -1,140 +0,0 @@
|
|||
/ {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "ralink,mtk7620n-soc", "ralink,mt7620-soc";
|
||||
|
||||
cpus {
|
||||
cpu@0 {
|
||||
compatible = "mips,mips24KEc";
|
||||
};
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,57600";
|
||||
};
|
||||
|
||||
cpuintc: cpuintc@0 {
|
||||
#address-cells = <0>;
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-controller;
|
||||
compatible = "mti,cpu-interrupt-controller";
|
||||
};
|
||||
|
||||
palmbus@10000000 {
|
||||
compatible = "palmbus";
|
||||
reg = <0x10000000 0x200000>;
|
||||
ranges = <0x0 0x10000000 0x1FFFFF>;
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
sysc@0 {
|
||||
compatible = "ralink,mt7620-sysc", "ralink,mt7620n-sysc";
|
||||
reg = <0x0 0x100>;
|
||||
};
|
||||
|
||||
timer@100 {
|
||||
compatible = "ralink,mt7620-timer", "ralink,rt2880-timer";
|
||||
reg = <0x100 0x20>;
|
||||
|
||||
interrupt-parent = <&intc>;
|
||||
interrupts = <1>;
|
||||
};
|
||||
|
||||
watchdog@120 {
|
||||
compatible = "ralink,mt7620-wdt", "ralink,rt2880-wdt";
|
||||
reg = <0x120 0x10>;
|
||||
};
|
||||
|
||||
intc: intc@200 {
|
||||
compatible = "ralink,mt7620-intc", "ralink,rt2880-intc";
|
||||
reg = <0x200 0x100>;
|
||||
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
|
||||
interrupt-parent = <&cpuintc>;
|
||||
interrupts = <2>;
|
||||
};
|
||||
|
||||
memc@300 {
|
||||
compatible = "ralink,mt7620-memc", "ralink,rt3050-memc";
|
||||
reg = <0x300 0x100>;
|
||||
};
|
||||
|
||||
gpio0: gpio@600 {
|
||||
compatible = "ralink,mt7620-gpio", "ralink,rt2880-gpio";
|
||||
reg = <0x600 0x34>;
|
||||
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
ralink,gpio-base = <0>;
|
||||
ralink,num-gpios = <24>;
|
||||
ralink,register-map = [ 00 04 08 0c
|
||||
20 24 28 2c
|
||||
30 34 ];
|
||||
};
|
||||
|
||||
gpio1: gpio@638 {
|
||||
compatible = "ralink,mt7620-gpio", "ralink,rt2880-gpio";
|
||||
reg = <0x638 0x24>;
|
||||
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
ralink,gpio-base = <24>;
|
||||
ralink,num-gpios = <16>;
|
||||
ralink,register-map = [ 00 04 08 0c
|
||||
10 14 18 1c
|
||||
20 24 ];
|
||||
};
|
||||
|
||||
gpio2: gpio@660 {
|
||||
compatible = "ralink,mt7620-gpio", "ralink,rt2880-gpio";
|
||||
reg = <0x660 0x24>;
|
||||
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
ralink,gpio-base = <40>;
|
||||
ralink,num-gpios = <32>;
|
||||
ralink,register-map = [ 00 04 08 0c
|
||||
10 14 18 1c
|
||||
20 24 ];
|
||||
};
|
||||
|
||||
gpio3: gpio@688 {
|
||||
compatible = "ralink,mt7620-gpio", "ralink,rt2880-gpio";
|
||||
reg = <0x688 0x24>;
|
||||
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
ralink,gpio-base = <72>;
|
||||
ralink,num-gpios = <1>;
|
||||
ralink,register-map = [ 00 04 08 0c
|
||||
10 14 18 1c
|
||||
20 24 ];
|
||||
};
|
||||
|
||||
spi@b00 {
|
||||
compatible = "ralink,rt3883-spi", "ralink,rt2880-spi";
|
||||
reg = <0xb00 0x100>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
uartlite@c00 {
|
||||
compatible = "ralink,mt7620-uart", "ralink,rt2880-uart", "ns16550a";
|
||||
reg = <0xc00 0x100>;
|
||||
|
||||
interrupt-parent = <&intc>;
|
||||
interrupts = <12>;
|
||||
|
||||
reg-shift = <2>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,294 @@
|
|||
/ {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "ralink,mtk7620a-soc";
|
||||
|
||||
cpus {
|
||||
cpu@0 {
|
||||
compatible = "mips,mips24KEc";
|
||||
};
|
||||
};
|
||||
|
||||
cpuintc: cpuintc@0 {
|
||||
#address-cells = <0>;
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-controller;
|
||||
compatible = "mti,cpu-interrupt-controller";
|
||||
};
|
||||
|
||||
palmbus@10000000 {
|
||||
compatible = "palmbus";
|
||||
reg = <0x10000000 0x200000>;
|
||||
ranges = <0x0 0x10000000 0x1FFFFF>;
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
sysc@0 {
|
||||
compatible = "ralink,mt7620a-sysc", "ralink,rt3050-sysc";
|
||||
reg = <0x0 0x100>;
|
||||
};
|
||||
|
||||
timer@100 {
|
||||
compatible = "ralink,mt7620a-timer", "ralink,rt2880-timer";
|
||||
reg = <0x100 0x20>;
|
||||
|
||||
interrupt-parent = <&intc>;
|
||||
interrupts = <1>;
|
||||
};
|
||||
|
||||
watchdog@120 {
|
||||
compatible = "ralink,mt7620a-wdt", "ralink,rt2880-wdt";
|
||||
reg = <0x120 0x10>;
|
||||
|
||||
resets = <&rstctrl 8>;
|
||||
reset-names = "wdt";
|
||||
|
||||
interrupt-parent = <&intc>;
|
||||
interrupts = <1>;
|
||||
};
|
||||
|
||||
intc: intc@200 {
|
||||
compatible = "ralink,mt7620a-intc", "ralink,rt2880-intc";
|
||||
reg = <0x200 0x100>;
|
||||
|
||||
resets = <&rstctrl 19>;
|
||||
reset-names = "intc";
|
||||
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
|
||||
interrupt-parent = <&cpuintc>;
|
||||
interrupts = <2>;
|
||||
};
|
||||
|
||||
memc@300 {
|
||||
compatible = "ralink,mt7620a-memc", "ralink,rt3050-memc";
|
||||
reg = <0x300 0x100>;
|
||||
|
||||
resets = <&rstctrl 20>;
|
||||
reset-names = "mc";
|
||||
|
||||
interrupt-parent = <&intc>;
|
||||
interrupts = <3>;
|
||||
};
|
||||
|
||||
uart@500 {
|
||||
compatible = "ralink,mt7620a-uart", "ralink,rt2880-uart", "ns16550a";
|
||||
reg = <0x500 0x100>;
|
||||
|
||||
resets = <&rstctrl 12>;
|
||||
reset-names = "uart";
|
||||
|
||||
interrupt-parent = <&intc>;
|
||||
interrupts = <5>;
|
||||
|
||||
reg-shift = <2>;
|
||||
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
gpio0: gpio@600 {
|
||||
compatible = "ralink,mt7620a-gpio", "ralink,rt2880-gpio";
|
||||
reg = <0x600 0x34>;
|
||||
|
||||
resets = <&rstctrl 13>;
|
||||
reset-names = "pio";
|
||||
|
||||
interrupt-parent = <&intc>;
|
||||
interrupts = <6>;
|
||||
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
ralink,gpio-base = <0>;
|
||||
ralink,num-gpios = <24>;
|
||||
ralink,register-map = [ 00 04 08 0c
|
||||
20 24 28 2c
|
||||
30 34 ];
|
||||
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
gpio1: gpio@638 {
|
||||
compatible = "ralink,mt7620a-gpio", "ralink,rt2880-gpio";
|
||||
reg = <0x638 0x24>;
|
||||
|
||||
interrupt-parent = <&intc>;
|
||||
interrupts = <6>;
|
||||
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
ralink,gpio-base = <24>;
|
||||
ralink,num-gpios = <16>;
|
||||
ralink,register-map = [ 00 04 08 0c
|
||||
10 14 18 1c
|
||||
20 24 ];
|
||||
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
gpio2: gpio@660 {
|
||||
compatible = "ralink,mt7620a-gpio", "ralink,rt2880-gpio";
|
||||
reg = <0x660 0x24>;
|
||||
|
||||
interrupt-parent = <&intc>;
|
||||
interrupts = <6>;
|
||||
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
ralink,gpio-base = <40>;
|
||||
ralink,num-gpios = <32>;
|
||||
ralink,register-map = [ 00 04 08 0c
|
||||
10 14 18 1c
|
||||
20 24 ];
|
||||
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c@900 {
|
||||
compatible = "link,mt7620a-i2c", "ralink,rt2880-i2c";
|
||||
reg = <0x900 0x100>;
|
||||
|
||||
resets = <&rstctrl 16>;
|
||||
reset-names = "i2c";
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
spi@b00 {
|
||||
compatible = "ralink,mt7620a-spi", "ralink,rt2880-spi";
|
||||
reg = <0xb00 0x100>;
|
||||
|
||||
resets = <&rstctrl 18>;
|
||||
reset-names = "spi";
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
uartlite@c00 {
|
||||
compatible = "ralink,mt7620a-uart", "ralink,rt2880-uart", "ns16550a";
|
||||
reg = <0xc00 0x100>;
|
||||
|
||||
resets = <&rstctrl 19>;
|
||||
reset-names = "uartl";
|
||||
|
||||
interrupt-parent = <&intc>;
|
||||
interrupts = <12>;
|
||||
|
||||
reg-shift = <2>;
|
||||
};
|
||||
|
||||
systick@d00 {
|
||||
compatible = "ralink,mt7620a-systick", "ralink,cevt-systick";
|
||||
reg = <0xd00 0x10>;
|
||||
|
||||
resets = <&rstctrl 28>;
|
||||
reset-names = "intc";
|
||||
|
||||
interrupt-parent = <&cpuintc>;
|
||||
interrupts = <7>;
|
||||
};
|
||||
|
||||
gdma@2800 {
|
||||
compatible = "ralink,mt7620a-gdma", "ralink,rt2880-gdma";
|
||||
reg = <0x2800 0x800>;
|
||||
|
||||
resets = <&rstctrl 14>;
|
||||
reset-names = "dma";
|
||||
|
||||
interrupt-parent = <&intc>;
|
||||
interrupts = <7>;
|
||||
};
|
||||
};
|
||||
|
||||
rstctrl: rstctrl {
|
||||
compatible = "ralink,mt7620a-reset", "ralink,rt2880-reset";
|
||||
#reset-cells = <1>;
|
||||
};
|
||||
|
||||
ubsphy {
|
||||
compatible = "ralink,mt7620a-usbphy";
|
||||
|
||||
resets = <&rstctrl 22 &rstctrl 25>;
|
||||
reset-names = "host", "device";
|
||||
};
|
||||
|
||||
ethernet@10100000 {
|
||||
compatible = "ralink,mt7620a-eth";
|
||||
reg = <0x10100000 10000>;
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
interrupt-parent = <&cpuintc>;
|
||||
interrupts = <5>;
|
||||
|
||||
status = "disabled";
|
||||
|
||||
mdio-bus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
gsw@10110000 {
|
||||
compatible = "ralink,mt7620a-gsw";
|
||||
reg = <0x10110000 8000>;
|
||||
|
||||
interrupt-parent = <&intc>;
|
||||
interrupts = <17>;
|
||||
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
sdhci@10130000 {
|
||||
compatible = "ralink,mt7620a-sdhci";
|
||||
reg = <0x10130000 4000>;
|
||||
|
||||
interrupt-parent = <&intc>;
|
||||
interrupts = <14>;
|
||||
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
ehci@101c0000 {
|
||||
compatible = "ralink,rt3xxx-ehci";
|
||||
reg = <0x101c0000 0x1000>;
|
||||
|
||||
interrupt-parent = <&intc>;
|
||||
interrupts = <18>;
|
||||
};
|
||||
|
||||
ohci@101c1000 {
|
||||
compatible = "ralink,rt3xxx-ohci";
|
||||
reg = <0x101c1000 0x1000>;
|
||||
|
||||
interrupt-parent = <&intc>;
|
||||
interrupts = <18>;
|
||||
};
|
||||
|
||||
pcie@10140000 {
|
||||
compatible = "ralink,mt7620a-pci";
|
||||
reg = <0x10140000 0x100
|
||||
0x10142000 0x100>;
|
||||
|
||||
resets = <&rstctrl 26>;
|
||||
reset-names = "pcie0";
|
||||
|
||||
interrupt-parent = <&cpuintc>;
|
||||
interrupts = <4>;
|
||||
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,99 @@
|
|||
/dts-v1/;
|
||||
|
||||
/include/ "mt7620a.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "ralink,mt7620a-eval-board", "ralink,mt7620a-soc";
|
||||
model = "Ralink MT7620A evaluation board";
|
||||
|
||||
memory@0 {
|
||||
reg = <0x0 0x2000000>;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,57600";
|
||||
};
|
||||
|
||||
palmbus@10000000 {
|
||||
sysc@0 {
|
||||
ralink,pinmux = "spi", "uartlite", "mdio", "wled", "ephy", "rgmii1", "rgmii2";
|
||||
ralink,gpiomux = "i2c", "jtag";
|
||||
ralink,uartmux = "gpio";
|
||||
ralink,wdtmux = <1>;
|
||||
};
|
||||
|
||||
gpio0: gpio@600 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
spi@b00 {
|
||||
status = "okay";
|
||||
|
||||
m25p80@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "en25q64";
|
||||
reg = <0 0>;
|
||||
linux,modalias = "m25p80", "en25q64";
|
||||
spi-max-frequency = <10000000>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0 0x30000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@30000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0x30000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
factory: partition@40000 {
|
||||
label = "factory";
|
||||
reg = <0x40000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@50000 {
|
||||
label = "firmware";
|
||||
reg = <0x50000 0x7b0000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ethernet@10100000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
gsw@10110000 {
|
||||
status = "okay";
|
||||
ralink,port4 = "ephy";
|
||||
};
|
||||
|
||||
sdhci@10130000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
pcie@10140000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
gpio-keys-polled {
|
||||
compatible = "gpio-keys";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
poll-interval = <20>;
|
||||
wps {
|
||||
label = "wps";
|
||||
gpios = <&gpio0 12 1>;
|
||||
linux,code = <0x100>;
|
||||
};
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&gpio0 13 1>;
|
||||
linux,code = <0x101>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -13,10 +13,6 @@
|
|||
bootargs = "console=ttyS0,57600";
|
||||
};
|
||||
|
||||
memorydetect {
|
||||
ralink,memory = <0x8000000 0x200000 0x8000000>;
|
||||
};
|
||||
|
||||
cpuintc: cpuintc@0 {
|
||||
#address-cells = <0>;
|
||||
#interrupt-cells = <1>;
|
||||
|
|
|
|||
|
|
@ -13,10 +13,6 @@
|
|||
bootargs = "console=ttyS0,57600";
|
||||
};
|
||||
|
||||
memorydetect {
|
||||
ralink,memory = <0x0 0x200000 0x4000000>;
|
||||
};
|
||||
|
||||
cpuintc: cpuintc@0 {
|
||||
#address-cells = <0>;
|
||||
#interrupt-cells = <1>;
|
||||
|
|
@ -48,12 +44,21 @@
|
|||
watchdog@120 {
|
||||
compatible = "ralink,rt3052-wdt", "ralink,rt2880-wdt";
|
||||
reg = <0x120 0x10>;
|
||||
|
||||
resets = <&rstctrl 8>;
|
||||
reset-names = "wdt";
|
||||
|
||||
interrupt-parent = <&intc>;
|
||||
interrupts = <1>;
|
||||
};
|
||||
|
||||
intc: intc@200 {
|
||||
compatible = "ralink,rt3052-intc", "ralink,rt2880-intc";
|
||||
reg = <0x200 0x100>;
|
||||
|
||||
resets = <&rstctrl 19>;
|
||||
reset-names = "intc";
|
||||
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
|
||||
|
|
@ -64,6 +69,27 @@
|
|||
memc@300 {
|
||||
compatible = "ralink,rt3052-memc", "ralink,rt3050-memc";
|
||||
reg = <0x300 0x100>;
|
||||
|
||||
resets = <&rstctrl 20>;
|
||||
reset-names = "mc";
|
||||
|
||||
interrupt-parent = <&intc>;
|
||||
interrupts = <3>;
|
||||
};
|
||||
|
||||
uart@500 {
|
||||
compatible = "ralink,rt5350-uart", "ralink,rt2880-uart", "ns16550a";
|
||||
reg = <0x500 0x100>;
|
||||
|
||||
resets = <&rstctrl 12>;
|
||||
reset-names = "uart";
|
||||
|
||||
interrupt-parent = <&intc>;
|
||||
interrupts = <5>;
|
||||
|
||||
reg-shift = <2>;
|
||||
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
gpio0: gpio@600 {
|
||||
|
|
@ -79,6 +105,12 @@
|
|||
20 24 28 2c
|
||||
30 34 ];
|
||||
|
||||
resets = <&rstctrl 13>;
|
||||
reset-names = "pio";
|
||||
|
||||
interrupt-parent = <&intc>;
|
||||
interrupts = <6>;
|
||||
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
|
|
@ -117,6 +149,10 @@
|
|||
spi@b00 {
|
||||
compatible = "ralink,rt3050-spi", "ralink,rt2880-spi";
|
||||
reg = <0xb00 0x100>;
|
||||
|
||||
resets = <&rstctrl 18>;
|
||||
reset-names = "spi";
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
|
|
@ -126,6 +162,9 @@
|
|||
uartlite@c00 {
|
||||
compatible = "ralink,rt3052-uart", "ralink,rt2880-uart", "ns16550a";
|
||||
reg = <0xc00 0x100>;
|
||||
|
||||
resets = <&rstctrl 19>;
|
||||
reset-names = "uartl";
|
||||
|
||||
interrupt-parent = <&intc>;
|
||||
interrupts = <12>;
|
||||
|
|
@ -135,6 +174,11 @@
|
|||
|
||||
};
|
||||
|
||||
rstctrl: rstctrl {
|
||||
compatible = "ralink,rt3050-reset", "ralink,rt2880-reset";
|
||||
#reset-cells = <1>;
|
||||
};
|
||||
|
||||
ethernet@10100000 {
|
||||
compatible = "ralink,rt3050-eth";
|
||||
reg = <0x10100000 10000>;
|
||||
|
|
|
|||
|
|
@ -13,10 +13,6 @@
|
|||
bootargs = "console=ttyS0,57600";
|
||||
};
|
||||
|
||||
memorydetect {
|
||||
ralink,memory = <0x0 0x200000 0x10000000>;
|
||||
};
|
||||
|
||||
cpuintc: cpuintc@0 {
|
||||
#address-cells = <0>;
|
||||
#interrupt-cells = <1>;
|
||||
|
|
@ -48,6 +44,12 @@
|
|||
watchdog@120 {
|
||||
compatible = "ralink,rt3352-wdt", "ralink,rt2880-wdt";
|
||||
reg = <0x120 0x10>;
|
||||
|
||||
resets = <&rstctrl 8>;
|
||||
reset-names = "wdt";
|
||||
|
||||
interrupt-parent = <&intc>;
|
||||
interrupts = <1>;
|
||||
};
|
||||
|
||||
intc: intc@200 {
|
||||
|
|
@ -64,6 +66,27 @@
|
|||
memc@300 {
|
||||
compatible = "ralink,rt3352-memc", "ralink,rt3050-memc";
|
||||
reg = <0x300 0x100>;
|
||||
|
||||
resets = <&rstctrl 20>;
|
||||
reset-names = "mc";
|
||||
|
||||
interrupt-parent = <&intc>;
|
||||
interrupts = <3>;
|
||||
};
|
||||
|
||||
uart@500 {
|
||||
compatible = "ralink,rt3352-uart", "ralink,rt2880-uart", "ns16550a";
|
||||
reg = <0x500 0x100>;
|
||||
|
||||
resets = <&rstctrl 12>;
|
||||
reset-names = "uart";
|
||||
|
||||
interrupt-parent = <&intc>;
|
||||
interrupts = <5>;
|
||||
|
||||
reg-shift = <2>;
|
||||
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
gpio0: gpio@600 {
|
||||
|
|
@ -78,6 +101,11 @@
|
|||
ralink,register-map = [ 00 04 08 0c
|
||||
20 24 28 2c
|
||||
30 34 ];
|
||||
resets = <&rstctrl 13>;
|
||||
reset-names = "pio";
|
||||
|
||||
interrupt-parent = <&intc>;
|
||||
interrupts = <6>;
|
||||
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
@ -120,6 +148,9 @@
|
|||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
resets = <&rstctrl 18>;
|
||||
reset-names = "spi";
|
||||
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
|
|
@ -127,6 +158,9 @@
|
|||
compatible = "ralink,rt3352-uart", "ralink,rt2880-uart", "ns16550a";
|
||||
reg = <0xc00 0x100>;
|
||||
|
||||
resets = <&rstctrl 19>;
|
||||
reset-names = "uartl";
|
||||
|
||||
interrupt-parent = <&intc>;
|
||||
interrupts = <12>;
|
||||
|
||||
|
|
@ -134,6 +168,11 @@
|
|||
};
|
||||
};
|
||||
|
||||
rstctrl: rstctrl {
|
||||
compatible = "ralink,rt3352-reset", "ralink,rt2880-reset";
|
||||
#reset-cells = <1>;
|
||||
};
|
||||
|
||||
ethernet@10100000 {
|
||||
compatible = "ralink,rt3352-eth", "ralink,rt3050-eth";
|
||||
reg = <0x10100000 10000>;
|
||||
|
|
|
|||
|
|
@ -17,10 +17,6 @@
|
|||
spi0 = &spi0;
|
||||
};
|
||||
|
||||
memorydetect {
|
||||
ralink,memory = <0x0 0x200000 0x10000000>;
|
||||
};
|
||||
|
||||
cpuintc: cpuintc@0 {
|
||||
#address-cells = <0>;
|
||||
#interrupt-cells = <1>;
|
||||
|
|
@ -52,12 +48,21 @@
|
|||
watchdog@120 {
|
||||
compatible = "ralink,rt3883-wdt", "ralink,rt2880-wdt";
|
||||
reg = <0x120 0x10>;
|
||||
|
||||
resets = <&rstctrl 8>;
|
||||
reset-names = "wdt";
|
||||
|
||||
interrupt-parent = <&intc>;
|
||||
interrupts = <1>;
|
||||
};
|
||||
|
||||
intc: intc@200 {
|
||||
compatible = "ralink,rt3883-intc", "ralink,rt2880-intc";
|
||||
reg = <0x200 0x100>;
|
||||
|
||||
resets = <&rstctrl 19>;
|
||||
reset-names = "intc";
|
||||
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
|
||||
|
|
@ -68,12 +73,39 @@
|
|||
memc@300 {
|
||||
compatible = "ralink,rt3883-memc", "ralink,rt3050-memc";
|
||||
reg = <0x300 0x100>;
|
||||
|
||||
resets = <&rstctrl 20>;
|
||||
reset-names = "mc";
|
||||
|
||||
interrupt-parent = <&intc>;
|
||||
interrupts = <3>;
|
||||
};
|
||||
|
||||
uart@500 {
|
||||
compatible = "ralink,rt3883-uart", "ralink,rt2880-uart", "ns16550a";
|
||||
reg = <0x500 0x100>;
|
||||
|
||||
resets = <&rstctrl 12>;
|
||||
reset-names = "uart";
|
||||
|
||||
interrupt-parent = <&intc>;
|
||||
interrupts = <5>;
|
||||
|
||||
reg-shift = <2>;
|
||||
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
gpio0: gpio@600 {
|
||||
compatible = "ralink,rt3883-gpio", "ralink,rt2880-gpio";
|
||||
reg = <0x600 0x34>;
|
||||
|
||||
resets = <&rstctrl 13>;
|
||||
reset-names = "pio";
|
||||
|
||||
interrupt-parent = <&intc>;
|
||||
interrupts = <6>;
|
||||
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
|
|
@ -140,6 +172,9 @@
|
|||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
resets = <&rstctrl 18>;
|
||||
reset-names = "spi";
|
||||
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
|
|
@ -147,6 +182,9 @@
|
|||
compatible = "ralink,rt3883-uart", "ralink,rt2880-uart", "ns16550a";
|
||||
reg = <0xc00 0x100>;
|
||||
|
||||
resets = <&rstctrl 19>;
|
||||
reset-names = "uartl";
|
||||
|
||||
interrupt-parent = <&intc>;
|
||||
interrupts = <12>;
|
||||
|
||||
|
|
@ -163,6 +201,11 @@
|
|||
|
||||
status = "disabled";
|
||||
|
||||
port@0 {
|
||||
compatible = "lantiq,rt3883-port", "ralink,eth-port";
|
||||
reg = <0>;
|
||||
};
|
||||
|
||||
mdio-bus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
|
@ -171,6 +214,11 @@
|
|||
};
|
||||
};
|
||||
|
||||
rstctrl: rstctrl {
|
||||
compatible = "ralink,rt3883-reset", "ralink,rt2880-reset";
|
||||
#reset-cells = <1>;
|
||||
};
|
||||
|
||||
pci@10140000 {
|
||||
compatible = "ralink,rt3883-pci";
|
||||
reg = <0x10140000 0x20000>;
|
||||
|
|
@ -257,6 +305,13 @@
|
|||
};
|
||||
};
|
||||
|
||||
ubsphy {
|
||||
compatible = "ralink,rt3xxx-usbphy";
|
||||
|
||||
resets = <&rstctrl 22 &rstctrl 25>;
|
||||
reset-names = "host", "device";
|
||||
};
|
||||
|
||||
wmac@10180000 {
|
||||
compatible = "ralink,rt3883-wmac", "ralink,rt2880-wmac";
|
||||
reg = <0x10180000 40000>;
|
||||
|
|
|
|||
|
|
@ -13,10 +13,6 @@
|
|||
bootargs = "console=ttyS0,57600";
|
||||
};
|
||||
|
||||
memorydetect {
|
||||
ralink,memory = <0x0 0x200000 0x4000000>;
|
||||
};
|
||||
|
||||
cpuintc: cpuintc@0 {
|
||||
#address-cells = <0>;
|
||||
#interrupt-cells = <1>;
|
||||
|
|
@ -48,12 +44,21 @@
|
|||
watchdog@120 {
|
||||
compatible = "ralink,rt5350-wdt", "ralink,rt2880-wdt";
|
||||
reg = <0x120 0x10>;
|
||||
|
||||
resets = <&rstctrl 8>;
|
||||
reset-names = "wdt";
|
||||
|
||||
interrupt-parent = <&intc>;
|
||||
interrupts = <1>;
|
||||
};
|
||||
|
||||
intc: intc@200 {
|
||||
compatible = "ralink,rt5350-intc", "ralink,rt2880-intc";
|
||||
reg = <0x200 0x100>;
|
||||
|
||||
resets = <&rstctrl 19>;
|
||||
reset-names = "intc";
|
||||
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
|
||||
|
|
@ -64,12 +69,39 @@
|
|||
memc@300 {
|
||||
compatible = "ralink,rt5350-memc", "ralink,rt3050-memc";
|
||||
reg = <0x300 0x100>;
|
||||
|
||||
resets = <&rstctrl 20>;
|
||||
reset-names = "mc";
|
||||
|
||||
interrupt-parent = <&intc>;
|
||||
interrupts = <3>;
|
||||
};
|
||||
|
||||
uart@500 {
|
||||
compatible = "ralink,rt5350-uart", "ralink,rt2880-uart", "ns16550a";
|
||||
reg = <0x500 0x100>;
|
||||
|
||||
resets = <&rstctrl 12>;
|
||||
reset-names = "uart";
|
||||
|
||||
interrupt-parent = <&intc>;
|
||||
interrupts = <5>;
|
||||
|
||||
reg-shift = <2>;
|
||||
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
gpio0: gpio@600 {
|
||||
compatible = "ralink,rt5350-gpio", "ralink,rt2880-gpio";
|
||||
reg = <0x600 0x34>;
|
||||
|
||||
resets = <&rstctrl 13>;
|
||||
reset-names = "pio";
|
||||
|
||||
interrupt-parent = <&intc>;
|
||||
interrupts = <6>;
|
||||
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
|
|
@ -86,6 +118,9 @@
|
|||
compatible = "ralink,rt5350-gpio", "ralink,rt2880-gpio";
|
||||
reg = <0x638 0x24>;
|
||||
|
||||
interrupt-parent = <&intc>;
|
||||
interrupts = <6>;
|
||||
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
|
|
@ -102,6 +137,9 @@
|
|||
compatible = "ralink,rt5350-gpio", "ralink,rt2880-gpio";
|
||||
reg = <0x660 0x24>;
|
||||
|
||||
interrupt-parent = <&intc>;
|
||||
interrupts = <6>;
|
||||
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
|
|
@ -114,9 +152,26 @@
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c@900 {
|
||||
compatible = "link,rt5350-i2c", "ralink,rt2880-i2c";
|
||||
reg = <0x900 0x100>;
|
||||
|
||||
resets = <&rstctrl 16>;
|
||||
reset-names = "i2c";
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
spi@b00 {
|
||||
compatible = "ralink,rt5350-spi", "ralink,rt2880-spi";
|
||||
reg = <0xb00 0x100>;
|
||||
|
||||
resets = <&rstctrl 18>;
|
||||
reset-names = "spi";
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
|
|
@ -127,15 +182,38 @@
|
|||
compatible = "ralink,rt5350-uart", "ralink,rt2880-uart", "ns16550a";
|
||||
reg = <0xc00 0x100>;
|
||||
|
||||
resets = <&rstctrl 19>;
|
||||
reset-names = "uartl";
|
||||
|
||||
interrupt-parent = <&intc>;
|
||||
interrupts = <12>;
|
||||
|
||||
reg-shift = <2>;
|
||||
};
|
||||
|
||||
systick@d00 {
|
||||
compatible = "ralink,rt5350-systick", "ralink,cevt-systick";
|
||||
reg = <0xd00 0x10>;
|
||||
|
||||
interrupt-parent = <&cpuintc>;
|
||||
interrupts = <7>;
|
||||
};
|
||||
};
|
||||
|
||||
rstctrl: rstctrl {
|
||||
compatible = "ralink,rt5350-reset", "ralink,rt2880-reset";
|
||||
#reset-cells = <1>;
|
||||
};
|
||||
|
||||
ubsphy {
|
||||
compatible = "ralink,rt3xxx-usbphy";
|
||||
|
||||
resets = <&rstctrl 22 &rstctrl 25>;
|
||||
reset-names = "host", "device";
|
||||
};
|
||||
|
||||
ethernet@10100000 {
|
||||
compatible = "ralink,rt5350-eth", "ralink,rt3050-eth";
|
||||
compatible = "ralink,rt5350-eth";
|
||||
reg = <0x10100000 10000>;
|
||||
|
||||
interrupt-parent = <&cpuintc>;
|
||||
|
|
@ -145,7 +223,7 @@
|
|||
};
|
||||
|
||||
esw@10110000 {
|
||||
compatible = "ralink,rt5350-esw", "ralink,rt3050-esw";
|
||||
compatible = "ralink,rt3050-esw";
|
||||
reg = <0x10110000 8000>;
|
||||
|
||||
interrupt-parent = <&intc>;
|
||||
|
|
@ -167,22 +245,18 @@
|
|||
};
|
||||
|
||||
ehci@101c0000 {
|
||||
compatible = "ralink,rt5350-ehci", "ehci-platform";
|
||||
compatible = "ralink,rt3xxx-ehci", "ehci-platform";
|
||||
reg = <0x101c0000 0x1000>;
|
||||
|
||||
interrupt-parent = <&intc>;
|
||||
interrupts = <18>;
|
||||
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
ohci@101c1000 {
|
||||
compatible = "ralink,rt5350-ohci", "ohci-platform";
|
||||
compatible = "ralink,rt3xxx-ohci", "ohci-platform";
|
||||
reg = <0x101c1000 0x1000>;
|
||||
|
||||
interrupt-parent = <&intc>;
|
||||
interrupts = <18>;
|
||||
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -519,6 +519,18 @@ define Image/Build/Profile/Default
|
|||
endef
|
||||
endif
|
||||
|
||||
#
|
||||
# MT7620A Profiles
|
||||
#
|
||||
|
||||
Image/Build/Profile/MT7620a=$(call BuildFirmware/Default8M/$(1),$(1),mt7620a,MT7620a)
|
||||
|
||||
ifeq ($(SUBTARGET),mt7620a)
|
||||
define Image/Build/Profile/Default
|
||||
$(call Image/Build/Profile/MT7620a,$(1))
|
||||
endef
|
||||
endif
|
||||
|
||||
|
||||
#
|
||||
# Generic Targets
|
||||
|
|
|
|||
|
|
@ -0,0 +1,65 @@
|
|||
#
|
||||
# Copyright (C) 2011 OpenWrt.org
|
||||
# Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
|
||||
#
|
||||
# This is free software, licensed under the GNU General Public License v2.
|
||||
# See /LICENSE for more information.
|
||||
#
|
||||
|
||||
include $(TOPDIR)/rules.mk
|
||||
|
||||
LZMA_TEXT_START := 0x80a00000
|
||||
LOADER := loader.bin
|
||||
LOADER_NAME := $(basename $(notdir $(LOADER)))
|
||||
LOADER_DATA :=
|
||||
TARGET_DIR :=
|
||||
FLASH_OFFS :=
|
||||
FLASH_MAX :=
|
||||
BOARD :=
|
||||
|
||||
ifeq ($(TARGET_DIR),)
|
||||
TARGET_DIR := $(KDIR)
|
||||
endif
|
||||
|
||||
LOADER_BIN := $(TARGET_DIR)/$(LOADER_NAME).bin
|
||||
LOADER_GZ := $(TARGET_DIR)/$(LOADER_NAME).gz
|
||||
LOADER_ELF := $(TARGET_DIR)/$(LOADER_NAME).elf
|
||||
|
||||
PKG_NAME := lzma-loader
|
||||
PKG_BUILD_DIR := $(KDIR)/$(PKG_NAME)
|
||||
|
||||
.PHONY : loader-compile loader.bin loader.elf loader.gz
|
||||
|
||||
$(PKG_BUILD_DIR)/.prepared:
|
||||
mkdir $(PKG_BUILD_DIR)
|
||||
$(CP) ./src/* $(PKG_BUILD_DIR)/
|
||||
touch $@
|
||||
|
||||
loader-compile: $(PKG_BUILD_DIR)/.prepared
|
||||
$(MAKE) -C $(PKG_BUILD_DIR) CROSS_COMPILE="$(TARGET_CROSS)" \
|
||||
LZMA_TEXT_START=$(LZMA_TEXT_START) \
|
||||
LOADER_DATA=$(LOADER_DATA) \
|
||||
FLASH_OFFS=$(FLASH_OFFS) \
|
||||
FLASH_MAX=$(FLASH_MAX) \
|
||||
BOARD="$(BOARD)" \
|
||||
PLATFORM="ralink" \
|
||||
clean all
|
||||
|
||||
loader.gz: $(PKG_BUILD_DIR)/loader.bin
|
||||
gzip -nc9 $< > $(LOADER_GZ)
|
||||
|
||||
loader.elf: $(PKG_BUILD_DIR)/loader.elf
|
||||
$(CP) $< $(LOADER_ELF)
|
||||
|
||||
loader.bin: $(PKG_BUILD_DIR)/loader.bin
|
||||
$(CP) $< $(LOADER_BIN)
|
||||
|
||||
download:
|
||||
prepare: $(PKG_BUILD_DIR)/.prepared
|
||||
compile: loader-compile
|
||||
|
||||
install:
|
||||
|
||||
clean:
|
||||
rm -rf $(PKG_BUILD_DIR)
|
||||
|
||||
|
|
@ -0,0 +1,584 @@
|
|||
/*
|
||||
LzmaDecode.c
|
||||
LZMA Decoder (optimized for Speed version)
|
||||
|
||||
LZMA SDK 4.40 Copyright (c) 1999-2006 Igor Pavlov (2006-05-01)
|
||||
http://www.7-zip.org/
|
||||
|
||||
LZMA SDK is licensed under two licenses:
|
||||
1) GNU Lesser General Public License (GNU LGPL)
|
||||
2) Common Public License (CPL)
|
||||
It means that you can select one of these two licenses and
|
||||
follow rules of that license.
|
||||
|
||||
SPECIAL EXCEPTION:
|
||||
Igor Pavlov, as the author of this Code, expressly permits you to
|
||||
statically or dynamically link your Code (or bind by name) to the
|
||||
interfaces of this file without subjecting your linked Code to the
|
||||
terms of the CPL or GNU LGPL. Any modifications or additions
|
||||
to this file, however, are subject to the LGPL or CPL terms.
|
||||
*/
|
||||
|
||||
#include "LzmaDecode.h"
|
||||
|
||||
#define kNumTopBits 24
|
||||
#define kTopValue ((UInt32)1 << kNumTopBits)
|
||||
|
||||
#define kNumBitModelTotalBits 11
|
||||
#define kBitModelTotal (1 << kNumBitModelTotalBits)
|
||||
#define kNumMoveBits 5
|
||||
|
||||
#define RC_READ_BYTE (*Buffer++)
|
||||
|
||||
#define RC_INIT2 Code = 0; Range = 0xFFFFFFFF; \
|
||||
{ int i; for(i = 0; i < 5; i++) { RC_TEST; Code = (Code << 8) | RC_READ_BYTE; }}
|
||||
|
||||
#ifdef _LZMA_IN_CB
|
||||
|
||||
#define RC_TEST { if (Buffer == BufferLim) \
|
||||
{ SizeT size; int result = InCallback->Read(InCallback, &Buffer, &size); if (result != LZMA_RESULT_OK) return result; \
|
||||
BufferLim = Buffer + size; if (size == 0) return LZMA_RESULT_DATA_ERROR; }}
|
||||
|
||||
#define RC_INIT Buffer = BufferLim = 0; RC_INIT2
|
||||
|
||||
#else
|
||||
|
||||
#define RC_TEST { if (Buffer == BufferLim) return LZMA_RESULT_DATA_ERROR; }
|
||||
|
||||
#define RC_INIT(buffer, bufferSize) Buffer = buffer; BufferLim = buffer + bufferSize; RC_INIT2
|
||||
|
||||
#endif
|
||||
|
||||
#define RC_NORMALIZE if (Range < kTopValue) { RC_TEST; Range <<= 8; Code = (Code << 8) | RC_READ_BYTE; }
|
||||
|
||||
#define IfBit0(p) RC_NORMALIZE; bound = (Range >> kNumBitModelTotalBits) * *(p); if (Code < bound)
|
||||
#define UpdateBit0(p) Range = bound; *(p) += (kBitModelTotal - *(p)) >> kNumMoveBits;
|
||||
#define UpdateBit1(p) Range -= bound; Code -= bound; *(p) -= (*(p)) >> kNumMoveBits;
|
||||
|
||||
#define RC_GET_BIT2(p, mi, A0, A1) IfBit0(p) \
|
||||
{ UpdateBit0(p); mi <<= 1; A0; } else \
|
||||
{ UpdateBit1(p); mi = (mi + mi) + 1; A1; }
|
||||
|
||||
#define RC_GET_BIT(p, mi) RC_GET_BIT2(p, mi, ; , ;)
|
||||
|
||||
#define RangeDecoderBitTreeDecode(probs, numLevels, res) \
|
||||
{ int i = numLevels; res = 1; \
|
||||
do { CProb *p = probs + res; RC_GET_BIT(p, res) } while(--i != 0); \
|
||||
res -= (1 << numLevels); }
|
||||
|
||||
|
||||
#define kNumPosBitsMax 4
|
||||
#define kNumPosStatesMax (1 << kNumPosBitsMax)
|
||||
|
||||
#define kLenNumLowBits 3
|
||||
#define kLenNumLowSymbols (1 << kLenNumLowBits)
|
||||
#define kLenNumMidBits 3
|
||||
#define kLenNumMidSymbols (1 << kLenNumMidBits)
|
||||
#define kLenNumHighBits 8
|
||||
#define kLenNumHighSymbols (1 << kLenNumHighBits)
|
||||
|
||||
#define LenChoice 0
|
||||
#define LenChoice2 (LenChoice + 1)
|
||||
#define LenLow (LenChoice2 + 1)
|
||||
#define LenMid (LenLow + (kNumPosStatesMax << kLenNumLowBits))
|
||||
#define LenHigh (LenMid + (kNumPosStatesMax << kLenNumMidBits))
|
||||
#define kNumLenProbs (LenHigh + kLenNumHighSymbols)
|
||||
|
||||
|
||||
#define kNumStates 12
|
||||
#define kNumLitStates 7
|
||||
|
||||
#define kStartPosModelIndex 4
|
||||
#define kEndPosModelIndex 14
|
||||
#define kNumFullDistances (1 << (kEndPosModelIndex >> 1))
|
||||
|
||||
#define kNumPosSlotBits 6
|
||||
#define kNumLenToPosStates 4
|
||||
|
||||
#define kNumAlignBits 4
|
||||
#define kAlignTableSize (1 << kNumAlignBits)
|
||||
|
||||
#define kMatchMinLen 2
|
||||
|
||||
#define IsMatch 0
|
||||
#define IsRep (IsMatch + (kNumStates << kNumPosBitsMax))
|
||||
#define IsRepG0 (IsRep + kNumStates)
|
||||
#define IsRepG1 (IsRepG0 + kNumStates)
|
||||
#define IsRepG2 (IsRepG1 + kNumStates)
|
||||
#define IsRep0Long (IsRepG2 + kNumStates)
|
||||
#define PosSlot (IsRep0Long + (kNumStates << kNumPosBitsMax))
|
||||
#define SpecPos (PosSlot + (kNumLenToPosStates << kNumPosSlotBits))
|
||||
#define Align (SpecPos + kNumFullDistances - kEndPosModelIndex)
|
||||
#define LenCoder (Align + kAlignTableSize)
|
||||
#define RepLenCoder (LenCoder + kNumLenProbs)
|
||||
#define Literal (RepLenCoder + kNumLenProbs)
|
||||
|
||||
#if Literal != LZMA_BASE_SIZE
|
||||
StopCompilingDueBUG
|
||||
#endif
|
||||
|
||||
int LzmaDecodeProperties(CLzmaProperties *propsRes, const unsigned char *propsData, int size)
|
||||
{
|
||||
unsigned char prop0;
|
||||
if (size < LZMA_PROPERTIES_SIZE)
|
||||
return LZMA_RESULT_DATA_ERROR;
|
||||
prop0 = propsData[0];
|
||||
if (prop0 >= (9 * 5 * 5))
|
||||
return LZMA_RESULT_DATA_ERROR;
|
||||
{
|
||||
for (propsRes->pb = 0; prop0 >= (9 * 5); propsRes->pb++, prop0 -= (9 * 5));
|
||||
for (propsRes->lp = 0; prop0 >= 9; propsRes->lp++, prop0 -= 9);
|
||||
propsRes->lc = prop0;
|
||||
/*
|
||||
unsigned char remainder = (unsigned char)(prop0 / 9);
|
||||
propsRes->lc = prop0 % 9;
|
||||
propsRes->pb = remainder / 5;
|
||||
propsRes->lp = remainder % 5;
|
||||
*/
|
||||
}
|
||||
|
||||
#ifdef _LZMA_OUT_READ
|
||||
{
|
||||
int i;
|
||||
propsRes->DictionarySize = 0;
|
||||
for (i = 0; i < 4; i++)
|
||||
propsRes->DictionarySize += (UInt32)(propsData[1 + i]) << (i * 8);
|
||||
if (propsRes->DictionarySize == 0)
|
||||
propsRes->DictionarySize = 1;
|
||||
}
|
||||
#endif
|
||||
return LZMA_RESULT_OK;
|
||||
}
|
||||
|
||||
#define kLzmaStreamWasFinishedId (-1)
|
||||
|
||||
int LzmaDecode(CLzmaDecoderState *vs,
|
||||
#ifdef _LZMA_IN_CB
|
||||
ILzmaInCallback *InCallback,
|
||||
#else
|
||||
const unsigned char *inStream, SizeT inSize, SizeT *inSizeProcessed,
|
||||
#endif
|
||||
unsigned char *outStream, SizeT outSize, SizeT *outSizeProcessed)
|
||||
{
|
||||
CProb *p = vs->Probs;
|
||||
SizeT nowPos = 0;
|
||||
Byte previousByte = 0;
|
||||
UInt32 posStateMask = (1 << (vs->Properties.pb)) - 1;
|
||||
UInt32 literalPosMask = (1 << (vs->Properties.lp)) - 1;
|
||||
int lc = vs->Properties.lc;
|
||||
|
||||
#ifdef _LZMA_OUT_READ
|
||||
|
||||
UInt32 Range = vs->Range;
|
||||
UInt32 Code = vs->Code;
|
||||
#ifdef _LZMA_IN_CB
|
||||
const Byte *Buffer = vs->Buffer;
|
||||
const Byte *BufferLim = vs->BufferLim;
|
||||
#else
|
||||
const Byte *Buffer = inStream;
|
||||
const Byte *BufferLim = inStream + inSize;
|
||||
#endif
|
||||
int state = vs->State;
|
||||
UInt32 rep0 = vs->Reps[0], rep1 = vs->Reps[1], rep2 = vs->Reps[2], rep3 = vs->Reps[3];
|
||||
int len = vs->RemainLen;
|
||||
UInt32 globalPos = vs->GlobalPos;
|
||||
UInt32 distanceLimit = vs->DistanceLimit;
|
||||
|
||||
Byte *dictionary = vs->Dictionary;
|
||||
UInt32 dictionarySize = vs->Properties.DictionarySize;
|
||||
UInt32 dictionaryPos = vs->DictionaryPos;
|
||||
|
||||
Byte tempDictionary[4];
|
||||
|
||||
#ifndef _LZMA_IN_CB
|
||||
*inSizeProcessed = 0;
|
||||
#endif
|
||||
*outSizeProcessed = 0;
|
||||
if (len == kLzmaStreamWasFinishedId)
|
||||
return LZMA_RESULT_OK;
|
||||
|
||||
if (dictionarySize == 0)
|
||||
{
|
||||
dictionary = tempDictionary;
|
||||
dictionarySize = 1;
|
||||
tempDictionary[0] = vs->TempDictionary[0];
|
||||
}
|
||||
|
||||
if (len == kLzmaNeedInitId)
|
||||
{
|
||||
{
|
||||
UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + vs->Properties.lp));
|
||||
UInt32 i;
|
||||
for (i = 0; i < numProbs; i++)
|
||||
p[i] = kBitModelTotal >> 1;
|
||||
rep0 = rep1 = rep2 = rep3 = 1;
|
||||
state = 0;
|
||||
globalPos = 0;
|
||||
distanceLimit = 0;
|
||||
dictionaryPos = 0;
|
||||
dictionary[dictionarySize - 1] = 0;
|
||||
#ifdef _LZMA_IN_CB
|
||||
RC_INIT;
|
||||
#else
|
||||
RC_INIT(inStream, inSize);
|
||||
#endif
|
||||
}
|
||||
len = 0;
|
||||
}
|
||||
while(len != 0 && nowPos < outSize)
|
||||
{
|
||||
UInt32 pos = dictionaryPos - rep0;
|
||||
if (pos >= dictionarySize)
|
||||
pos += dictionarySize;
|
||||
outStream[nowPos++] = dictionary[dictionaryPos] = dictionary[pos];
|
||||
if (++dictionaryPos == dictionarySize)
|
||||
dictionaryPos = 0;
|
||||
len--;
|
||||
}
|
||||
if (dictionaryPos == 0)
|
||||
previousByte = dictionary[dictionarySize - 1];
|
||||
else
|
||||
previousByte = dictionary[dictionaryPos - 1];
|
||||
|
||||
#else /* if !_LZMA_OUT_READ */
|
||||
|
||||
int state = 0;
|
||||
UInt32 rep0 = 1, rep1 = 1, rep2 = 1, rep3 = 1;
|
||||
int len = 0;
|
||||
const Byte *Buffer;
|
||||
const Byte *BufferLim;
|
||||
UInt32 Range;
|
||||
UInt32 Code;
|
||||
|
||||
#ifndef _LZMA_IN_CB
|
||||
*inSizeProcessed = 0;
|
||||
#endif
|
||||
*outSizeProcessed = 0;
|
||||
|
||||
{
|
||||
UInt32 i;
|
||||
UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + vs->Properties.lp));
|
||||
for (i = 0; i < numProbs; i++)
|
||||
p[i] = kBitModelTotal >> 1;
|
||||
}
|
||||
|
||||
#ifdef _LZMA_IN_CB
|
||||
RC_INIT;
|
||||
#else
|
||||
RC_INIT(inStream, inSize);
|
||||
#endif
|
||||
|
||||
#endif /* _LZMA_OUT_READ */
|
||||
|
||||
while(nowPos < outSize)
|
||||
{
|
||||
CProb *prob;
|
||||
UInt32 bound;
|
||||
int posState = (int)(
|
||||
(nowPos
|
||||
#ifdef _LZMA_OUT_READ
|
||||
+ globalPos
|
||||
#endif
|
||||
)
|
||||
& posStateMask);
|
||||
|
||||
prob = p + IsMatch + (state << kNumPosBitsMax) + posState;
|
||||
IfBit0(prob)
|
||||
{
|
||||
int symbol = 1;
|
||||
UpdateBit0(prob)
|
||||
prob = p + Literal + (LZMA_LIT_SIZE *
|
||||
(((
|
||||
(nowPos
|
||||
#ifdef _LZMA_OUT_READ
|
||||
+ globalPos
|
||||
#endif
|
||||
)
|
||||
& literalPosMask) << lc) + (previousByte >> (8 - lc))));
|
||||
|
||||
if (state >= kNumLitStates)
|
||||
{
|
||||
int matchByte;
|
||||
#ifdef _LZMA_OUT_READ
|
||||
UInt32 pos = dictionaryPos - rep0;
|
||||
if (pos >= dictionarySize)
|
||||
pos += dictionarySize;
|
||||
matchByte = dictionary[pos];
|
||||
#else
|
||||
matchByte = outStream[nowPos - rep0];
|
||||
#endif
|
||||
do
|
||||
{
|
||||
int bit;
|
||||
CProb *probLit;
|
||||
matchByte <<= 1;
|
||||
bit = (matchByte & 0x100);
|
||||
probLit = prob + 0x100 + bit + symbol;
|
||||
RC_GET_BIT2(probLit, symbol, if (bit != 0) break, if (bit == 0) break)
|
||||
}
|
||||
while (symbol < 0x100);
|
||||
}
|
||||
while (symbol < 0x100)
|
||||
{
|
||||
CProb *probLit = prob + symbol;
|
||||
RC_GET_BIT(probLit, symbol)
|
||||
}
|
||||
previousByte = (Byte)symbol;
|
||||
|
||||
outStream[nowPos++] = previousByte;
|
||||
#ifdef _LZMA_OUT_READ
|
||||
if (distanceLimit < dictionarySize)
|
||||
distanceLimit++;
|
||||
|
||||
dictionary[dictionaryPos] = previousByte;
|
||||
if (++dictionaryPos == dictionarySize)
|
||||
dictionaryPos = 0;
|
||||
#endif
|
||||
if (state < 4) state = 0;
|
||||
else if (state < 10) state -= 3;
|
||||
else state -= 6;
|
||||
}
|
||||
else
|
||||
{
|
||||
UpdateBit1(prob);
|
||||
prob = p + IsRep + state;
|
||||
IfBit0(prob)
|
||||
{
|
||||
UpdateBit0(prob);
|
||||
rep3 = rep2;
|
||||
rep2 = rep1;
|
||||
rep1 = rep0;
|
||||
state = state < kNumLitStates ? 0 : 3;
|
||||
prob = p + LenCoder;
|
||||
}
|
||||
else
|
||||
{
|
||||
UpdateBit1(prob);
|
||||
prob = p + IsRepG0 + state;
|
||||
IfBit0(prob)
|
||||
{
|
||||
UpdateBit0(prob);
|
||||
prob = p + IsRep0Long + (state << kNumPosBitsMax) + posState;
|
||||
IfBit0(prob)
|
||||
{
|
||||
#ifdef _LZMA_OUT_READ
|
||||
UInt32 pos;
|
||||
#endif
|
||||
UpdateBit0(prob);
|
||||
|
||||
#ifdef _LZMA_OUT_READ
|
||||
if (distanceLimit == 0)
|
||||
#else
|
||||
if (nowPos == 0)
|
||||
#endif
|
||||
return LZMA_RESULT_DATA_ERROR;
|
||||
|
||||
state = state < kNumLitStates ? 9 : 11;
|
||||
#ifdef _LZMA_OUT_READ
|
||||
pos = dictionaryPos - rep0;
|
||||
if (pos >= dictionarySize)
|
||||
pos += dictionarySize;
|
||||
previousByte = dictionary[pos];
|
||||
dictionary[dictionaryPos] = previousByte;
|
||||
if (++dictionaryPos == dictionarySize)
|
||||
dictionaryPos = 0;
|
||||
#else
|
||||
previousByte = outStream[nowPos - rep0];
|
||||
#endif
|
||||
outStream[nowPos++] = previousByte;
|
||||
#ifdef _LZMA_OUT_READ
|
||||
if (distanceLimit < dictionarySize)
|
||||
distanceLimit++;
|
||||
#endif
|
||||
|
||||
continue;
|
||||
}
|
||||
else
|
||||
{
|
||||
UpdateBit1(prob);
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
UInt32 distance;
|
||||
UpdateBit1(prob);
|
||||
prob = p + IsRepG1 + state;
|
||||
IfBit0(prob)
|
||||
{
|
||||
UpdateBit0(prob);
|
||||
distance = rep1;
|
||||
}
|
||||
else
|
||||
{
|
||||
UpdateBit1(prob);
|
||||
prob = p + IsRepG2 + state;
|
||||
IfBit0(prob)
|
||||
{
|
||||
UpdateBit0(prob);
|
||||
distance = rep2;
|
||||
}
|
||||
else
|
||||
{
|
||||
UpdateBit1(prob);
|
||||
distance = rep3;
|
||||
rep3 = rep2;
|
||||
}
|
||||
rep2 = rep1;
|
||||
}
|
||||
rep1 = rep0;
|
||||
rep0 = distance;
|
||||
}
|
||||
state = state < kNumLitStates ? 8 : 11;
|
||||
prob = p + RepLenCoder;
|
||||
}
|
||||
{
|
||||
int numBits, offset;
|
||||
CProb *probLen = prob + LenChoice;
|
||||
IfBit0(probLen)
|
||||
{
|
||||
UpdateBit0(probLen);
|
||||
probLen = prob + LenLow + (posState << kLenNumLowBits);
|
||||
offset = 0;
|
||||
numBits = kLenNumLowBits;
|
||||
}
|
||||
else
|
||||
{
|
||||
UpdateBit1(probLen);
|
||||
probLen = prob + LenChoice2;
|
||||
IfBit0(probLen)
|
||||
{
|
||||
UpdateBit0(probLen);
|
||||
probLen = prob + LenMid + (posState << kLenNumMidBits);
|
||||
offset = kLenNumLowSymbols;
|
||||
numBits = kLenNumMidBits;
|
||||
}
|
||||
else
|
||||
{
|
||||
UpdateBit1(probLen);
|
||||
probLen = prob + LenHigh;
|
||||
offset = kLenNumLowSymbols + kLenNumMidSymbols;
|
||||
numBits = kLenNumHighBits;
|
||||
}
|
||||
}
|
||||
RangeDecoderBitTreeDecode(probLen, numBits, len);
|
||||
len += offset;
|
||||
}
|
||||
|
||||
if (state < 4)
|
||||
{
|
||||
int posSlot;
|
||||
state += kNumLitStates;
|
||||
prob = p + PosSlot +
|
||||
((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) <<
|
||||
kNumPosSlotBits);
|
||||
RangeDecoderBitTreeDecode(prob, kNumPosSlotBits, posSlot);
|
||||
if (posSlot >= kStartPosModelIndex)
|
||||
{
|
||||
int numDirectBits = ((posSlot >> 1) - 1);
|
||||
rep0 = (2 | ((UInt32)posSlot & 1));
|
||||
if (posSlot < kEndPosModelIndex)
|
||||
{
|
||||
rep0 <<= numDirectBits;
|
||||
prob = p + SpecPos + rep0 - posSlot - 1;
|
||||
}
|
||||
else
|
||||
{
|
||||
numDirectBits -= kNumAlignBits;
|
||||
do
|
||||
{
|
||||
RC_NORMALIZE
|
||||
Range >>= 1;
|
||||
rep0 <<= 1;
|
||||
if (Code >= Range)
|
||||
{
|
||||
Code -= Range;
|
||||
rep0 |= 1;
|
||||
}
|
||||
}
|
||||
while (--numDirectBits != 0);
|
||||
prob = p + Align;
|
||||
rep0 <<= kNumAlignBits;
|
||||
numDirectBits = kNumAlignBits;
|
||||
}
|
||||
{
|
||||
int i = 1;
|
||||
int mi = 1;
|
||||
do
|
||||
{
|
||||
CProb *prob3 = prob + mi;
|
||||
RC_GET_BIT2(prob3, mi, ; , rep0 |= i);
|
||||
i <<= 1;
|
||||
}
|
||||
while(--numDirectBits != 0);
|
||||
}
|
||||
}
|
||||
else
|
||||
rep0 = posSlot;
|
||||
if (++rep0 == (UInt32)(0))
|
||||
{
|
||||
/* it's for stream version */
|
||||
len = kLzmaStreamWasFinishedId;
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
len += kMatchMinLen;
|
||||
#ifdef _LZMA_OUT_READ
|
||||
if (rep0 > distanceLimit)
|
||||
#else
|
||||
if (rep0 > nowPos)
|
||||
#endif
|
||||
return LZMA_RESULT_DATA_ERROR;
|
||||
|
||||
#ifdef _LZMA_OUT_READ
|
||||
if (dictionarySize - distanceLimit > (UInt32)len)
|
||||
distanceLimit += len;
|
||||
else
|
||||
distanceLimit = dictionarySize;
|
||||
#endif
|
||||
|
||||
do
|
||||
{
|
||||
#ifdef _LZMA_OUT_READ
|
||||
UInt32 pos = dictionaryPos - rep0;
|
||||
if (pos >= dictionarySize)
|
||||
pos += dictionarySize;
|
||||
previousByte = dictionary[pos];
|
||||
dictionary[dictionaryPos] = previousByte;
|
||||
if (++dictionaryPos == dictionarySize)
|
||||
dictionaryPos = 0;
|
||||
#else
|
||||
previousByte = outStream[nowPos - rep0];
|
||||
#endif
|
||||
len--;
|
||||
outStream[nowPos++] = previousByte;
|
||||
}
|
||||
while(len != 0 && nowPos < outSize);
|
||||
}
|
||||
}
|
||||
RC_NORMALIZE;
|
||||
|
||||
#ifdef _LZMA_OUT_READ
|
||||
vs->Range = Range;
|
||||
vs->Code = Code;
|
||||
vs->DictionaryPos = dictionaryPos;
|
||||
vs->GlobalPos = globalPos + (UInt32)nowPos;
|
||||
vs->DistanceLimit = distanceLimit;
|
||||
vs->Reps[0] = rep0;
|
||||
vs->Reps[1] = rep1;
|
||||
vs->Reps[2] = rep2;
|
||||
vs->Reps[3] = rep3;
|
||||
vs->State = state;
|
||||
vs->RemainLen = len;
|
||||
vs->TempDictionary[0] = tempDictionary[0];
|
||||
#endif
|
||||
|
||||
#ifdef _LZMA_IN_CB
|
||||
vs->Buffer = Buffer;
|
||||
vs->BufferLim = BufferLim;
|
||||
#else
|
||||
*inSizeProcessed = (SizeT)(Buffer - inStream);
|
||||
#endif
|
||||
*outSizeProcessed = nowPos;
|
||||
return LZMA_RESULT_OK;
|
||||
}
|
||||
|
|
@ -0,0 +1,113 @@
|
|||
/*
|
||||
LzmaDecode.h
|
||||
LZMA Decoder interface
|
||||
|
||||
LZMA SDK 4.40 Copyright (c) 1999-2006 Igor Pavlov (2006-05-01)
|
||||
http://www.7-zip.org/
|
||||
|
||||
LZMA SDK is licensed under two licenses:
|
||||
1) GNU Lesser General Public License (GNU LGPL)
|
||||
2) Common Public License (CPL)
|
||||
It means that you can select one of these two licenses and
|
||||
follow rules of that license.
|
||||
|
||||
SPECIAL EXCEPTION:
|
||||
Igor Pavlov, as the author of this code, expressly permits you to
|
||||
statically or dynamically link your code (or bind by name) to the
|
||||
interfaces of this file without subjecting your linked code to the
|
||||
terms of the CPL or GNU LGPL. Any modifications or additions
|
||||
to this file, however, are subject to the LGPL or CPL terms.
|
||||
*/
|
||||
|
||||
#ifndef __LZMADECODE_H
|
||||
#define __LZMADECODE_H
|
||||
|
||||
#include "LzmaTypes.h"
|
||||
|
||||
/* #define _LZMA_IN_CB */
|
||||
/* Use callback for input data */
|
||||
|
||||
/* #define _LZMA_OUT_READ */
|
||||
/* Use read function for output data */
|
||||
|
||||
/* #define _LZMA_PROB32 */
|
||||
/* It can increase speed on some 32-bit CPUs,
|
||||
but memory usage will be doubled in that case */
|
||||
|
||||
/* #define _LZMA_LOC_OPT */
|
||||
/* Enable local speed optimizations inside code */
|
||||
|
||||
#ifdef _LZMA_PROB32
|
||||
#define CProb UInt32
|
||||
#else
|
||||
#define CProb UInt16
|
||||
#endif
|
||||
|
||||
#define LZMA_RESULT_OK 0
|
||||
#define LZMA_RESULT_DATA_ERROR 1
|
||||
|
||||
#ifdef _LZMA_IN_CB
|
||||
typedef struct _ILzmaInCallback
|
||||
{
|
||||
int (*Read)(void *object, const unsigned char **buffer, SizeT *bufferSize);
|
||||
} ILzmaInCallback;
|
||||
#endif
|
||||
|
||||
#define LZMA_BASE_SIZE 1846
|
||||
#define LZMA_LIT_SIZE 768
|
||||
|
||||
#define LZMA_PROPERTIES_SIZE 5
|
||||
|
||||
typedef struct _CLzmaProperties
|
||||
{
|
||||
int lc;
|
||||
int lp;
|
||||
int pb;
|
||||
#ifdef _LZMA_OUT_READ
|
||||
UInt32 DictionarySize;
|
||||
#endif
|
||||
}CLzmaProperties;
|
||||
|
||||
int LzmaDecodeProperties(CLzmaProperties *propsRes, const unsigned char *propsData, int size);
|
||||
|
||||
#define LzmaGetNumProbs(Properties) (LZMA_BASE_SIZE + (LZMA_LIT_SIZE << ((Properties)->lc + (Properties)->lp)))
|
||||
|
||||
#define kLzmaNeedInitId (-2)
|
||||
|
||||
typedef struct _CLzmaDecoderState
|
||||
{
|
||||
CLzmaProperties Properties;
|
||||
CProb *Probs;
|
||||
|
||||
#ifdef _LZMA_IN_CB
|
||||
const unsigned char *Buffer;
|
||||
const unsigned char *BufferLim;
|
||||
#endif
|
||||
|
||||
#ifdef _LZMA_OUT_READ
|
||||
unsigned char *Dictionary;
|
||||
UInt32 Range;
|
||||
UInt32 Code;
|
||||
UInt32 DictionaryPos;
|
||||
UInt32 GlobalPos;
|
||||
UInt32 DistanceLimit;
|
||||
UInt32 Reps[4];
|
||||
int State;
|
||||
int RemainLen;
|
||||
unsigned char TempDictionary[4];
|
||||
#endif
|
||||
} CLzmaDecoderState;
|
||||
|
||||
#ifdef _LZMA_OUT_READ
|
||||
#define LzmaDecoderInit(vs) { (vs)->RemainLen = kLzmaNeedInitId; }
|
||||
#endif
|
||||
|
||||
int LzmaDecode(CLzmaDecoderState *vs,
|
||||
#ifdef _LZMA_IN_CB
|
||||
ILzmaInCallback *inCallback,
|
||||
#else
|
||||
const unsigned char *inStream, SizeT inSize, SizeT *inSizeProcessed,
|
||||
#endif
|
||||
unsigned char *outStream, SizeT outSize, SizeT *outSizeProcessed);
|
||||
|
||||
#endif
|
||||
|
|
@ -0,0 +1,45 @@
|
|||
/*
|
||||
LzmaTypes.h
|
||||
|
||||
Types for LZMA Decoder
|
||||
|
||||
This file written and distributed to public domain by Igor Pavlov.
|
||||
This file is part of LZMA SDK 4.40 (2006-05-01)
|
||||
*/
|
||||
|
||||
#ifndef __LZMATYPES_H
|
||||
#define __LZMATYPES_H
|
||||
|
||||
#ifndef _7ZIP_BYTE_DEFINED
|
||||
#define _7ZIP_BYTE_DEFINED
|
||||
typedef unsigned char Byte;
|
||||
#endif
|
||||
|
||||
#ifndef _7ZIP_UINT16_DEFINED
|
||||
#define _7ZIP_UINT16_DEFINED
|
||||
typedef unsigned short UInt16;
|
||||
#endif
|
||||
|
||||
#ifndef _7ZIP_UINT32_DEFINED
|
||||
#define _7ZIP_UINT32_DEFINED
|
||||
#ifdef _LZMA_UINT32_IS_ULONG
|
||||
typedef unsigned long UInt32;
|
||||
#else
|
||||
typedef unsigned int UInt32;
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/* #define _LZMA_NO_SYSTEM_SIZE_T */
|
||||
/* You can use it, if you don't want <stddef.h> */
|
||||
|
||||
#ifndef _7ZIP_SIZET_DEFINED
|
||||
#define _7ZIP_SIZET_DEFINED
|
||||
#ifdef _LZMA_NO_SYSTEM_SIZE_T
|
||||
typedef UInt32 SizeT;
|
||||
#else
|
||||
#include <stddef.h>
|
||||
typedef size_t SizeT;
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif
|
||||
|
|
@ -0,0 +1,110 @@
|
|||
#
|
||||
# Makefile for the LZMA compressed kernel loader for
|
||||
# Atheros AR7XXX/AR9XXX based boards
|
||||
#
|
||||
# Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
|
||||
#
|
||||
# Some parts of this file was based on the OpenWrt specific lzma-loader
|
||||
# for the BCM47xx and ADM5120 based boards:
|
||||
# Copyright (C) 2004 Manuel Novoa III (mjn3@codepoet.org)
|
||||
# Copyright (C) 2005 Mineharu Takahara <mtakahar@yahoo.com>
|
||||
# Copyright (C) 2005 by Oleg I. Vdovikin <oleg@cs.msu.su>
|
||||
#
|
||||
# This program is free software; you can redistribute it and/or modify it
|
||||
# under the terms of the GNU General Public License version 2 as published
|
||||
# by the Free Software Foundation.
|
||||
#
|
||||
|
||||
LOADADDR :=
|
||||
LZMA_TEXT_START := 0x80a00000
|
||||
LOADER_DATA :=
|
||||
BOARD :=
|
||||
FLASH_OFFS :=
|
||||
FLASH_MAX :=
|
||||
PLATFORM :=
|
||||
|
||||
CC := $(CROSS_COMPILE)gcc
|
||||
LD := $(CROSS_COMPILE)ld
|
||||
OBJCOPY := $(CROSS_COMPILE)objcopy
|
||||
OBJDUMP := $(CROSS_COMPILE)objdump
|
||||
|
||||
BIN_FLAGS := -O binary -R .reginfo -R .note -R .comment -R .mdebug -S
|
||||
|
||||
CFLAGS = -D__KERNEL__ -Wall -Wstrict-prototypes -Wno-trigraphs -Os \
|
||||
-fno-strict-aliasing -fno-common -fomit-frame-pointer -G 0 \
|
||||
-mno-abicalls -fno-pic -ffunction-sections -pipe -mlong-calls \
|
||||
-fno-common -ffreestanding -fhonour-copts \
|
||||
-mabi=32 -march=mips32r2 \
|
||||
-Wa,-32 -Wa,-march=mips32r2 -Wa,-mips32r2 -Wa,--trap
|
||||
CFLAGS += -D_LZMA_PROB32 -DARCH=$(PLATFORM)
|
||||
|
||||
ASFLAGS = $(CFLAGS) -D__ASSEMBLY__
|
||||
|
||||
LDFLAGS = -static --gc-sections -no-warn-mismatch
|
||||
LDFLAGS += -e startup -T loader.lds -Ttext $(LZMA_TEXT_START)
|
||||
|
||||
O_FORMAT = $(shell $(OBJDUMP) -i | head -2 | grep elf32)
|
||||
|
||||
OBJECTS := head.o loader.o cache.o board-$(PLATFORM).o printf.o LzmaDecode.o
|
||||
|
||||
include $(PLATFORM).mk
|
||||
CFLAGS+=$(CACHE_FLAGS)
|
||||
ASFLAGS+=$(CACHE_FLAGS)
|
||||
|
||||
ifneq ($(strip $(LOADER_DATA)),)
|
||||
OBJECTS += data.o
|
||||
CFLAGS += -DLZMA_WRAPPER=1 -DLOADADDR=$(LOADADDR)
|
||||
endif
|
||||
|
||||
ifneq ($(strip $(KERNEL_CMDLINE)),)
|
||||
CFLAGS += -DCONFIG_KERNEL_CMDLINE='"$(KERNEL_CMDLINE)"'
|
||||
endif
|
||||
|
||||
ifneq ($(strip $(FLASH_OFFS)),)
|
||||
CFLAGS += -DCONFIG_FLASH_OFFS=$(FLASH_OFFS)
|
||||
endif
|
||||
|
||||
ifneq ($(strip $(FLASH_MAX)),)
|
||||
CFLAGS += -DCONFIG_FLASH_MAX=$(FLASH_MAX)
|
||||
endif
|
||||
|
||||
BOARD_DEF := $(shell echo $(strip $(BOARD)) | tr a-z A-Z | tr - _)
|
||||
ifneq ($(BOARD_DEF),)
|
||||
CFLAGS += -DCONFIG_BOARD_$(BOARD_DEF)
|
||||
endif
|
||||
|
||||
all: loader.elf
|
||||
|
||||
# Don't build dependencies, this may die if $(CC) isn't gcc
|
||||
dep:
|
||||
|
||||
install:
|
||||
|
||||
%.o : %.c
|
||||
$(CC) $(CFLAGS) -c -o $@ $<
|
||||
|
||||
%.o : %.S
|
||||
$(CC) $(ASFLAGS) -c -o $@ $<
|
||||
|
||||
data.o: $(LOADER_DATA)
|
||||
$(LD) -r -b binary --oformat $(O_FORMAT) -T lzma-data.lds -o $@ $<
|
||||
|
||||
loader: $(OBJECTS)
|
||||
$(LD) $(LDFLAGS) -o $@ $(OBJECTS)
|
||||
|
||||
loader.bin: loader
|
||||
$(OBJCOPY) $(BIN_FLAGS) $< $@
|
||||
|
||||
loader2.o: loader.bin
|
||||
$(LD) -r -b binary --oformat $(O_FORMAT) -o $@ $<
|
||||
|
||||
loader.elf: loader2.o
|
||||
$(LD) -e startup -T loader2.lds -Ttext $(LOADADDR) -o $@ $<
|
||||
|
||||
mrproper: clean
|
||||
|
||||
clean:
|
||||
rm -f loader *.elf *.bin *.o
|
||||
|
||||
|
||||
|
||||
|
|
@ -0,0 +1,42 @@
|
|||
/*
|
||||
* Arch specific code for Ralink based boards
|
||||
*
|
||||
* Copyright (C) 2013 John Crispin <blogic@openwrt.org>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License version 2 as published
|
||||
* by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#include <stddef.h>
|
||||
#include "config.h"
|
||||
|
||||
#define READREG(r) *(volatile unsigned int *)(r)
|
||||
#define WRITEREG(r,v) *(volatile unsigned int *)(r) = v
|
||||
|
||||
#define KSEG1ADDR(_x) (((_x) & 0x1fffffff) | 0xa0000000)
|
||||
|
||||
#ifdef CONFIG_SOC_RT288X
|
||||
#define UART_BASE 0xb0300c00
|
||||
#else
|
||||
#define UART_BASE 0xb0000c00
|
||||
#endif
|
||||
|
||||
#define UART_TX 1
|
||||
#define UART_LSR 7
|
||||
|
||||
#define UART_LSR_THRE 0x20
|
||||
|
||||
#define UART_READ(r) READREG(UART_BASE + 4 * (r))
|
||||
#define UART_WRITE(r,v) WRITEREG(UART_BASE + 4 * (r), (v))
|
||||
|
||||
void board_putc(int ch)
|
||||
{
|
||||
while (((UART_READ(UART_LSR)) & UART_LSR_THRE) == 0);
|
||||
UART_WRITE(UART_TX, ch);
|
||||
while (((UART_READ(UART_LSR)) & UART_LSR_THRE) == 0);
|
||||
}
|
||||
|
||||
void board_init(void)
|
||||
{
|
||||
}
|
||||
|
|
@ -0,0 +1,43 @@
|
|||
/*
|
||||
* LZMA compressed kernel loader for Atheros AR7XXX/AR9XXX based boards
|
||||
*
|
||||
* Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
|
||||
*
|
||||
* The cache manipulation routine has been taken from the U-Boot project.
|
||||
* (C) Copyright 2003
|
||||
* Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License version 2 as published
|
||||
* by the Free Software Foundation.
|
||||
*
|
||||
*/
|
||||
|
||||
#include "cache.h"
|
||||
#include "cacheops.h"
|
||||
#include "config.h"
|
||||
|
||||
#define cache_op(op,addr) \
|
||||
__asm__ __volatile__( \
|
||||
" .set push \n" \
|
||||
" .set noreorder \n" \
|
||||
" .set mips3\n\t \n" \
|
||||
" cache %0, %1 \n" \
|
||||
" .set pop \n" \
|
||||
: \
|
||||
: "i" (op), "R" (*(unsigned char *)(addr)))
|
||||
|
||||
void flush_cache(unsigned long start_addr, unsigned long size)
|
||||
{
|
||||
unsigned long lsize = CONFIG_CACHELINE_SIZE;
|
||||
unsigned long addr = start_addr & ~(lsize - 1);
|
||||
unsigned long aend = (start_addr + size - 1) & ~(lsize - 1);
|
||||
|
||||
while (1) {
|
||||
cache_op(Hit_Writeback_Inv_D, addr);
|
||||
cache_op(Hit_Invalidate_I, addr);
|
||||
if (addr == aend)
|
||||
break;
|
||||
addr += lsize;
|
||||
}
|
||||
}
|
||||
|
|
@ -0,0 +1,17 @@
|
|||
/*
|
||||
* LZMA compressed kernel loader for Atheros AR7XXX/AR9XXX based boards
|
||||
*
|
||||
* Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License version 2 as published
|
||||
* by the Free Software Foundation.
|
||||
*
|
||||
*/
|
||||
|
||||
#ifndef __CACHE_H
|
||||
#define __CACHE_H
|
||||
|
||||
void flush_cache(unsigned long start_addr, unsigned long size);
|
||||
|
||||
#endif /* __CACHE_H */
|
||||
|
|
@ -0,0 +1,85 @@
|
|||
/*
|
||||
* Cache operations for the cache instruction.
|
||||
*
|
||||
* This file is subject to the terms and conditions of the GNU General Public
|
||||
* License. See the file "COPYING" in the main directory of this archive
|
||||
* for more details.
|
||||
*
|
||||
* (C) Copyright 1996, 97, 99, 2002, 03 Ralf Baechle
|
||||
* (C) Copyright 1999 Silicon Graphics, Inc.
|
||||
*/
|
||||
#ifndef __ASM_CACHEOPS_H
|
||||
#define __ASM_CACHEOPS_H
|
||||
|
||||
/*
|
||||
* Cache Operations available on all MIPS processors with R4000-style caches
|
||||
*/
|
||||
#define Index_Invalidate_I 0x00
|
||||
#define Index_Writeback_Inv_D 0x01
|
||||
#define Index_Load_Tag_I 0x04
|
||||
#define Index_Load_Tag_D 0x05
|
||||
#define Index_Store_Tag_I 0x08
|
||||
#define Index_Store_Tag_D 0x09
|
||||
#if defined(CONFIG_CPU_LOONGSON2)
|
||||
#define Hit_Invalidate_I 0x00
|
||||
#else
|
||||
#define Hit_Invalidate_I 0x10
|
||||
#endif
|
||||
#define Hit_Invalidate_D 0x11
|
||||
#define Hit_Writeback_Inv_D 0x15
|
||||
|
||||
/*
|
||||
* R4000-specific cacheops
|
||||
*/
|
||||
#define Create_Dirty_Excl_D 0x0d
|
||||
#define Fill 0x14
|
||||
#define Hit_Writeback_I 0x18
|
||||
#define Hit_Writeback_D 0x19
|
||||
|
||||
/*
|
||||
* R4000SC and R4400SC-specific cacheops
|
||||
*/
|
||||
#define Index_Invalidate_SI 0x02
|
||||
#define Index_Writeback_Inv_SD 0x03
|
||||
#define Index_Load_Tag_SI 0x06
|
||||
#define Index_Load_Tag_SD 0x07
|
||||
#define Index_Store_Tag_SI 0x0A
|
||||
#define Index_Store_Tag_SD 0x0B
|
||||
#define Create_Dirty_Excl_SD 0x0f
|
||||
#define Hit_Invalidate_SI 0x12
|
||||
#define Hit_Invalidate_SD 0x13
|
||||
#define Hit_Writeback_Inv_SD 0x17
|
||||
#define Hit_Writeback_SD 0x1b
|
||||
#define Hit_Set_Virtual_SI 0x1e
|
||||
#define Hit_Set_Virtual_SD 0x1f
|
||||
|
||||
/*
|
||||
* R5000-specific cacheops
|
||||
*/
|
||||
#define R5K_Page_Invalidate_S 0x17
|
||||
|
||||
/*
|
||||
* RM7000-specific cacheops
|
||||
*/
|
||||
#define Page_Invalidate_T 0x16
|
||||
|
||||
/*
|
||||
* R10000-specific cacheops
|
||||
*
|
||||
* Cacheops 0x02, 0x06, 0x0a, 0x0c-0x0e, 0x16, 0x1a and 0x1e are unused.
|
||||
* Most of the _S cacheops are identical to the R4000SC _SD cacheops.
|
||||
*/
|
||||
#define Index_Writeback_Inv_S 0x03
|
||||
#define Index_Load_Tag_S 0x07
|
||||
#define Index_Store_Tag_S 0x0B
|
||||
#define Hit_Invalidate_S 0x13
|
||||
#define Cache_Barrier 0x14
|
||||
#define Hit_Writeback_Inv_S 0x17
|
||||
#define Index_Load_Data_I 0x18
|
||||
#define Index_Load_Data_D 0x19
|
||||
#define Index_Load_Data_S 0x1b
|
||||
#define Index_Store_Data_I 0x1c
|
||||
#define Index_Store_Data_D 0x1d
|
||||
#define Index_Store_Data_S 0x1f
|
||||
|
||||
#endif /* __ASM_CACHEOPS_H */
|
||||
|
|
@ -0,0 +1,27 @@
|
|||
/*
|
||||
* LZMA compressed kernel loader for Atheros AR7XXX/AR9XXX based boards
|
||||
*
|
||||
* Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License version 2 as published
|
||||
* by the Free Software Foundation.
|
||||
*
|
||||
*/
|
||||
|
||||
#ifndef _CONFIG_H_
|
||||
#define _CONFIG_H_
|
||||
|
||||
#ifndef CONFIG_FLASH_OFFS
|
||||
#define CONFIG_FLASH_OFFS 0
|
||||
#endif
|
||||
|
||||
#ifndef CONFIG_FLASH_MAX
|
||||
#define CONFIG_FLASH_MAX 0
|
||||
#endif
|
||||
|
||||
#ifndef CONFIG_FLASH_STEP
|
||||
#define CONFIG_FLASH_STEP 0x1000
|
||||
#endif
|
||||
|
||||
#endif /* _CONFIG_H_ */
|
||||
|
|
@ -0,0 +1,39 @@
|
|||
/*
|
||||
* Copyright (C) 1994, 1995, 1996, 1997, 2000, 2001 by Ralf Baechle
|
||||
*
|
||||
* Copyright (C) 2001, Monta Vista Software
|
||||
* Author: jsun@mvista.com or jsun@junsun.net
|
||||
*/
|
||||
#ifndef _cp0regdef_h_
|
||||
#define _cp0regdef_h_
|
||||
|
||||
#define CP0_INDEX $0
|
||||
#define CP0_RANDOM $1
|
||||
#define CP0_ENTRYLO0 $2
|
||||
#define CP0_ENTRYLO1 $3
|
||||
#define CP0_CONTEXT $4
|
||||
#define CP0_PAGEMASK $5
|
||||
#define CP0_WIRED $6
|
||||
#define CP0_BADVADDR $8
|
||||
#define CP0_COUNT $9
|
||||
#define CP0_ENTRYHI $10
|
||||
#define CP0_COMPARE $11
|
||||
#define CP0_STATUS $12
|
||||
#define CP0_CAUSE $13
|
||||
#define CP0_EPC $14
|
||||
#define CP0_PRID $15
|
||||
#define CP0_CONFIG $16
|
||||
#define CP0_LLADDR $17
|
||||
#define CP0_WATCHLO $18
|
||||
#define CP0_WATCHHI $19
|
||||
#define CP0_XCONTEXT $20
|
||||
#define CP0_FRAMEMASK $21
|
||||
#define CP0_DIAGNOSTIC $22
|
||||
#define CP0_PERFORMANCE $25
|
||||
#define CP0_ECC $26
|
||||
#define CP0_CACHEERR $27
|
||||
#define CP0_TAGLO $28
|
||||
#define CP0_TAGHI $29
|
||||
#define CP0_ERROREPC $30
|
||||
|
||||
#endif
|
||||
|
|
@ -0,0 +1,118 @@
|
|||
/*
|
||||
* LZMA compressed kernel loader for Atheros AR7XXX/AR9XXX based boards
|
||||
*
|
||||
* Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
|
||||
*
|
||||
* Some parts of this code was based on the OpenWrt specific lzma-loader
|
||||
* for the BCM47xx and ADM5120 based boards:
|
||||
* Copyright (C) 2004 Manuel Novoa III (mjn3@codepoet.org)
|
||||
* Copyright (C) 2005 by Oleg I. Vdovikin <oleg@cs.msu.su>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License version 2 as published
|
||||
* by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#include <asm/asm.h>
|
||||
#include <asm/regdef.h>
|
||||
#include "cp0regdef.h"
|
||||
#include "cacheops.h"
|
||||
#include "config.h"
|
||||
|
||||
#define KSEG0 0x80000000
|
||||
|
||||
.macro ehb
|
||||
sll zero, 3
|
||||
.endm
|
||||
|
||||
.text
|
||||
|
||||
LEAF(startup)
|
||||
.set noreorder
|
||||
.set mips32
|
||||
|
||||
mtc0 zero, CP0_WATCHLO # clear watch registers
|
||||
mtc0 zero, CP0_WATCHHI
|
||||
mtc0 zero, CP0_CAUSE # clear before writing status register
|
||||
|
||||
mfc0 t0, CP0_STATUS
|
||||
li t1, 0x1000001f
|
||||
or t0, t1
|
||||
xori t0, 0x1f
|
||||
mtc0 t0, CP0_STATUS
|
||||
ehb
|
||||
|
||||
mtc0 zero, CP0_COUNT
|
||||
mtc0 zero, CP0_COMPARE
|
||||
ehb
|
||||
|
||||
la t0, __reloc_label # get linked address of label
|
||||
bal __reloc_label # branch and link to label to
|
||||
nop # get actual address
|
||||
__reloc_label:
|
||||
subu t0, ra, t0 # get reloc_delta
|
||||
|
||||
beqz t0, __reloc_done # if delta is 0 we are in the right place
|
||||
nop
|
||||
|
||||
/* Copy our code to the right place */
|
||||
la t1, _code_start # get linked address of _code_start
|
||||
la t2, _code_end # get linked address of _code_end
|
||||
addu t0, t0, t1 # calculate actual address of _code_start
|
||||
|
||||
__reloc_copy:
|
||||
lw t3, 0(t0)
|
||||
sw t3, 0(t1)
|
||||
add t1, 4
|
||||
blt t1, t2, __reloc_copy
|
||||
add t0, 4
|
||||
|
||||
/* flush cache */
|
||||
la t0, _code_start
|
||||
la t1, _code_end
|
||||
|
||||
li t2, ~(CONFIG_CACHELINE_SIZE - 1)
|
||||
and t0, t2
|
||||
and t1, t2
|
||||
li t2, CONFIG_CACHELINE_SIZE
|
||||
|
||||
b __flush_check
|
||||
nop
|
||||
|
||||
__flush_line:
|
||||
cache Hit_Writeback_Inv_D, 0(t0)
|
||||
cache Hit_Invalidate_I, 0(t0)
|
||||
add t0, t2
|
||||
|
||||
__flush_check:
|
||||
bne t0, t1, __flush_line
|
||||
nop
|
||||
|
||||
sync
|
||||
|
||||
__reloc_done:
|
||||
|
||||
/* clear bss */
|
||||
la t0, _bss_start
|
||||
la t1, _bss_end
|
||||
b __bss_check
|
||||
nop
|
||||
|
||||
__bss_fill:
|
||||
sw zero, 0(t0)
|
||||
addi t0, 4
|
||||
|
||||
__bss_check:
|
||||
bne t0, t1, __bss_fill
|
||||
nop
|
||||
|
||||
/* Setup new "C" stack */
|
||||
la sp, _stack
|
||||
|
||||
/* jump to the decompressor routine */
|
||||
la t0, loader_main
|
||||
jr t0
|
||||
nop
|
||||
|
||||
.set reorder
|
||||
END(startup)
|
||||
|
|
@ -0,0 +1 @@
|
|||
CACHE_FLAGS+=-DCONFIG_ICACHE_SIZE="(32 * 1024)" -DCONFIG_DCACHE_SIZE="(32 * 1024)" -DCONFIG_CACHELINE_SIZE=32
|
||||
|
|
@ -0,0 +1,263 @@
|
|||
/*
|
||||
* LZMA compressed kernel loader for Atheros AR7XXX/AR9XXX based boards
|
||||
*
|
||||
* Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
|
||||
*
|
||||
* Some parts of this code was based on the OpenWrt specific lzma-loader
|
||||
* for the BCM47xx and ADM5120 based boards:
|
||||
* Copyright (C) 2004 Manuel Novoa III (mjn3@codepoet.org)
|
||||
* Copyright (C) 2005 Mineharu Takahara <mtakahar@yahoo.com>
|
||||
* Copyright (C) 2005 by Oleg I. Vdovikin <oleg@cs.msu.su>
|
||||
*
|
||||
* The image_header structure has been taken from the U-Boot project.
|
||||
* (C) Copyright 2008 Semihalf
|
||||
* (C) Copyright 2000-2005
|
||||
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License version 2 as published
|
||||
* by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#include <stddef.h>
|
||||
#include <stdint.h>
|
||||
|
||||
#include "config.h"
|
||||
#include "cache.h"
|
||||
#include "printf.h"
|
||||
#include "LzmaDecode.h"
|
||||
|
||||
#define AR71XX_FLASH_START 0x1f000000
|
||||
#define AR71XX_FLASH_END 0x1fe00000
|
||||
|
||||
#define KSEG0 0x80000000
|
||||
#define KSEG1 0xa0000000
|
||||
|
||||
#define KSEG1ADDR(a) ((((unsigned)(a)) & 0x1fffffffU) | KSEG1)
|
||||
|
||||
#undef LZMA_DEBUG
|
||||
|
||||
#ifdef LZMA_DEBUG
|
||||
# define DBG(f, a...) printf(f, ## a)
|
||||
#else
|
||||
# define DBG(f, a...) do {} while (0)
|
||||
#endif
|
||||
|
||||
#define IH_MAGIC_OKLI 0x4f4b4c49 /* 'OKLI' */
|
||||
|
||||
#define IH_NMLEN 32 /* Image Name Length */
|
||||
|
||||
typedef struct image_header {
|
||||
uint32_t ih_magic; /* Image Header Magic Number */
|
||||
uint32_t ih_hcrc; /* Image Header CRC Checksum */
|
||||
uint32_t ih_time; /* Image Creation Timestamp */
|
||||
uint32_t ih_size; /* Image Data Size */
|
||||
uint32_t ih_load; /* Data Load Address */
|
||||
uint32_t ih_ep; /* Entry Point Address */
|
||||
uint32_t ih_dcrc; /* Image Data CRC Checksum */
|
||||
uint8_t ih_os; /* Operating System */
|
||||
uint8_t ih_arch; /* CPU architecture */
|
||||
uint8_t ih_type; /* Image Type */
|
||||
uint8_t ih_comp; /* Compression Type */
|
||||
uint8_t ih_name[IH_NMLEN]; /* Image Name */
|
||||
} image_header_t;
|
||||
|
||||
/* beyond the image end, size not known in advance */
|
||||
extern unsigned char workspace[];
|
||||
extern void board_init(void);
|
||||
|
||||
static CLzmaDecoderState lzma_state;
|
||||
static unsigned char *lzma_data;
|
||||
static unsigned long lzma_datasize;
|
||||
static unsigned long lzma_outsize;
|
||||
static unsigned long kernel_la;
|
||||
|
||||
#ifdef CONFIG_KERNEL_CMDLINE
|
||||
#define kernel_argc 1
|
||||
static const char kernel_cmdline[] = CONFIG_KERNEL_CMDLINE;
|
||||
static const char *kernel_argv[] = {
|
||||
kernel_cmdline,
|
||||
NULL,
|
||||
};
|
||||
#endif /* CONFIG_KERNEL_CMDLINE */
|
||||
|
||||
static void halt(void)
|
||||
{
|
||||
printf("\nSystem halted!\n");
|
||||
for(;;);
|
||||
}
|
||||
|
||||
static __inline__ unsigned long get_be32(void *buf)
|
||||
{
|
||||
unsigned char *p = buf;
|
||||
|
||||
return (((unsigned long) p[0] << 24) +
|
||||
((unsigned long) p[1] << 16) +
|
||||
((unsigned long) p[2] << 8) +
|
||||
(unsigned long) p[3]);
|
||||
}
|
||||
|
||||
static __inline__ unsigned char lzma_get_byte(void)
|
||||
{
|
||||
unsigned char c;
|
||||
|
||||
lzma_datasize--;
|
||||
c = *lzma_data++;
|
||||
|
||||
return c;
|
||||
}
|
||||
|
||||
static int lzma_init_props(void)
|
||||
{
|
||||
unsigned char props[LZMA_PROPERTIES_SIZE];
|
||||
int res;
|
||||
int i;
|
||||
|
||||
/* read lzma properties */
|
||||
for (i = 0; i < LZMA_PROPERTIES_SIZE; i++)
|
||||
props[i] = lzma_get_byte();
|
||||
|
||||
/* read the lower half of uncompressed size in the header */
|
||||
lzma_outsize = ((SizeT) lzma_get_byte()) +
|
||||
((SizeT) lzma_get_byte() << 8) +
|
||||
((SizeT) lzma_get_byte() << 16) +
|
||||
((SizeT) lzma_get_byte() << 24);
|
||||
|
||||
/* skip rest of the header (upper half of uncompressed size) */
|
||||
for (i = 0; i < 4; i++)
|
||||
lzma_get_byte();
|
||||
|
||||
res = LzmaDecodeProperties(&lzma_state.Properties, props,
|
||||
LZMA_PROPERTIES_SIZE);
|
||||
return res;
|
||||
}
|
||||
|
||||
static int lzma_decompress(unsigned char *outStream)
|
||||
{
|
||||
SizeT ip, op;
|
||||
int ret;
|
||||
|
||||
lzma_state.Probs = (CProb *) workspace;
|
||||
|
||||
ret = LzmaDecode(&lzma_state, lzma_data, lzma_datasize, &ip, outStream,
|
||||
lzma_outsize, &op);
|
||||
|
||||
if (ret != LZMA_RESULT_OK) {
|
||||
int i;
|
||||
|
||||
DBG("LzmaDecode error %d at %08x, osize:%d ip:%d op:%d\n",
|
||||
ret, lzma_data + ip, lzma_outsize, ip, op);
|
||||
|
||||
for (i = 0; i < 16; i++)
|
||||
DBG("%02x ", lzma_data[ip + i]);
|
||||
|
||||
DBG("\n");
|
||||
}
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
#if (LZMA_WRAPPER)
|
||||
static void lzma_init_data(void)
|
||||
{
|
||||
extern unsigned char _lzma_data_start[];
|
||||
extern unsigned char _lzma_data_end[];
|
||||
|
||||
kernel_la = LOADADDR;
|
||||
lzma_data = _lzma_data_start;
|
||||
lzma_datasize = _lzma_data_end - _lzma_data_start;
|
||||
}
|
||||
#else
|
||||
static void lzma_init_data(void)
|
||||
{
|
||||
struct image_header *hdr = NULL;
|
||||
unsigned char *flash_base;
|
||||
unsigned long flash_ofs;
|
||||
unsigned long kernel_ofs;
|
||||
unsigned long kernel_size;
|
||||
|
||||
flash_base = (unsigned char *) KSEG1ADDR(AR71XX_FLASH_START);
|
||||
|
||||
printf("Looking for OpenWrt image... ");
|
||||
|
||||
for (flash_ofs = CONFIG_FLASH_OFFS;
|
||||
flash_ofs <= (CONFIG_FLASH_OFFS + CONFIG_FLASH_MAX);
|
||||
flash_ofs += CONFIG_FLASH_STEP) {
|
||||
unsigned long magic;
|
||||
unsigned char *p;
|
||||
|
||||
p = flash_base + flash_ofs;
|
||||
magic = get_be32(p);
|
||||
if (magic == IH_MAGIC_OKLI) {
|
||||
hdr = (struct image_header *) p;
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
if (hdr == NULL) {
|
||||
printf("not found!\n");
|
||||
halt();
|
||||
}
|
||||
|
||||
printf("found at 0x%08x\n", flash_base + flash_ofs);
|
||||
|
||||
kernel_ofs = sizeof(struct image_header);
|
||||
kernel_size = get_be32(&hdr->ih_size);
|
||||
kernel_la = get_be32(&hdr->ih_load);
|
||||
|
||||
lzma_data = flash_base + flash_ofs + kernel_ofs;
|
||||
lzma_datasize = kernel_size;
|
||||
}
|
||||
#endif /* (LZMA_WRAPPER) */
|
||||
|
||||
void loader_main(unsigned long reg_a0, unsigned long reg_a1,
|
||||
unsigned long reg_a2, unsigned long reg_a3)
|
||||
{
|
||||
void (*kernel_entry) (unsigned long, unsigned long, unsigned long,
|
||||
unsigned long);
|
||||
int res;
|
||||
|
||||
board_init();
|
||||
|
||||
printf("\n\nOpenWrt kernel loader for MIPS based SoC\n");
|
||||
printf("Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>\n");
|
||||
|
||||
lzma_init_data();
|
||||
|
||||
res = lzma_init_props();
|
||||
if (res != LZMA_RESULT_OK) {
|
||||
printf("Incorrect LZMA stream properties!\n");
|
||||
halt();
|
||||
}
|
||||
|
||||
printf("Decompressing kernel... ");
|
||||
|
||||
res = lzma_decompress((unsigned char *) kernel_la);
|
||||
if (res != LZMA_RESULT_OK) {
|
||||
printf("failed, ");
|
||||
switch (res) {
|
||||
case LZMA_RESULT_DATA_ERROR:
|
||||
printf("data error!\n");
|
||||
break;
|
||||
default:
|
||||
printf("unknown error %d!\n", res);
|
||||
}
|
||||
halt();
|
||||
} else {
|
||||
printf("done!\n");
|
||||
}
|
||||
|
||||
flush_cache(kernel_la, lzma_outsize);
|
||||
|
||||
printf("Starting kernel at %08x...\n\n", kernel_la);
|
||||
|
||||
#ifdef CONFIG_KERNEL_CMDLINE
|
||||
reg_a0 = kernel_argc;
|
||||
reg_a1 = (unsigned long) kernel_argv;
|
||||
reg_a2 = 0;
|
||||
reg_a3 = 0;
|
||||
#endif
|
||||
|
||||
kernel_entry = (void *) kernel_la;
|
||||
kernel_entry(reg_a0, reg_a1, reg_a2, reg_a3);
|
||||
}
|
||||
|
|
@ -0,0 +1,35 @@
|
|||
OUTPUT_ARCH(mips)
|
||||
SECTIONS {
|
||||
.text : {
|
||||
_code_start = .;
|
||||
*(.text)
|
||||
*(.text.*)
|
||||
*(.rodata)
|
||||
*(.rodata.*)
|
||||
*(.data.lzma)
|
||||
}
|
||||
|
||||
. = ALIGN(32);
|
||||
.data : {
|
||||
*(.data)
|
||||
*(.data.*)
|
||||
. = . + 524288; /* workaround for buggy bootloaders */
|
||||
}
|
||||
|
||||
. = ALIGN(32);
|
||||
_code_end = .;
|
||||
|
||||
_bss_start = .;
|
||||
.bss : {
|
||||
*(.bss)
|
||||
*(.bss.*)
|
||||
}
|
||||
|
||||
. = ALIGN(32);
|
||||
_bss_end = .;
|
||||
|
||||
. = . + 8192;
|
||||
_stack = .;
|
||||
|
||||
workspace = .;
|
||||
}
|
||||
|
|
@ -0,0 +1,10 @@
|
|||
OUTPUT_ARCH(mips)
|
||||
SECTIONS {
|
||||
.text : {
|
||||
startup = .;
|
||||
*(.text)
|
||||
*(.text.*)
|
||||
*(.data)
|
||||
*(.data.*)
|
||||
}
|
||||
}
|
||||
|
|
@ -0,0 +1,8 @@
|
|||
OUTPUT_ARCH(mips)
|
||||
SECTIONS {
|
||||
.data.lzma : {
|
||||
_lzma_data_start = .;
|
||||
*(.data)
|
||||
_lzma_data_end = .;
|
||||
}
|
||||
}
|
||||
|
|
@ -0,0 +1,350 @@
|
|||
/*
|
||||
* Copyright (C) 2001 MontaVista Software Inc.
|
||||
* Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the
|
||||
* Free Software Foundation; either version 2 of the License, or (at your
|
||||
* option) any later version.
|
||||
*
|
||||
*/
|
||||
|
||||
#include "printf.h"
|
||||
|
||||
extern void board_putc(int ch);
|
||||
|
||||
/* this is the maximum width for a variable */
|
||||
#define LP_MAX_BUF 256
|
||||
|
||||
/* macros */
|
||||
#define IsDigit(x) ( ((x) >= '0') && ((x) <= '9') )
|
||||
#define Ctod(x) ( (x) - '0')
|
||||
|
||||
/* forward declaration */
|
||||
static int PrintChar(char *, char, int, int);
|
||||
static int PrintString(char *, char *, int, int);
|
||||
static int PrintNum(char *, unsigned long, int, int, int, int, char, int);
|
||||
|
||||
/* private variable */
|
||||
static const char theFatalMsg[] = "fatal error in lp_Print!";
|
||||
|
||||
/* -*-
|
||||
* A low level printf() function.
|
||||
*/
|
||||
static void
|
||||
lp_Print(void (*output)(void *, char *, int),
|
||||
void * arg,
|
||||
char *fmt,
|
||||
va_list ap)
|
||||
{
|
||||
|
||||
#define OUTPUT(arg, s, l) \
|
||||
{ if (((l) < 0) || ((l) > LP_MAX_BUF)) { \
|
||||
(*output)(arg, (char*)theFatalMsg, sizeof(theFatalMsg)-1); for(;;); \
|
||||
} else { \
|
||||
(*output)(arg, s, l); \
|
||||
} \
|
||||
}
|
||||
|
||||
char buf[LP_MAX_BUF];
|
||||
|
||||
char c;
|
||||
char *s;
|
||||
long int num;
|
||||
|
||||
int longFlag;
|
||||
int negFlag;
|
||||
int width;
|
||||
int prec;
|
||||
int ladjust;
|
||||
char padc;
|
||||
|
||||
int length;
|
||||
|
||||
for(;;) {
|
||||
{
|
||||
/* scan for the next '%' */
|
||||
char *fmtStart = fmt;
|
||||
while ( (*fmt != '\0') && (*fmt != '%')) {
|
||||
fmt ++;
|
||||
}
|
||||
|
||||
/* flush the string found so far */
|
||||
OUTPUT(arg, fmtStart, fmt-fmtStart);
|
||||
|
||||
/* are we hitting the end? */
|
||||
if (*fmt == '\0') break;
|
||||
}
|
||||
|
||||
/* we found a '%' */
|
||||
fmt ++;
|
||||
|
||||
/* check for long */
|
||||
if (*fmt == 'l') {
|
||||
longFlag = 1;
|
||||
fmt ++;
|
||||
} else {
|
||||
longFlag = 0;
|
||||
}
|
||||
|
||||
/* check for other prefixes */
|
||||
width = 0;
|
||||
prec = -1;
|
||||
ladjust = 0;
|
||||
padc = ' ';
|
||||
|
||||
if (*fmt == '-') {
|
||||
ladjust = 1;
|
||||
fmt ++;
|
||||
}
|
||||
|
||||
if (*fmt == '0') {
|
||||
padc = '0';
|
||||
fmt++;
|
||||
}
|
||||
|
||||
if (IsDigit(*fmt)) {
|
||||
while (IsDigit(*fmt)) {
|
||||
width = 10 * width + Ctod(*fmt++);
|
||||
}
|
||||
}
|
||||
|
||||
if (*fmt == '.') {
|
||||
fmt ++;
|
||||
if (IsDigit(*fmt)) {
|
||||
prec = 0;
|
||||
while (IsDigit(*fmt)) {
|
||||
prec = prec*10 + Ctod(*fmt++);
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
/* check format flag */
|
||||
negFlag = 0;
|
||||
switch (*fmt) {
|
||||
case 'b':
|
||||
if (longFlag) {
|
||||
num = va_arg(ap, long int);
|
||||
} else {
|
||||
num = va_arg(ap, int);
|
||||
}
|
||||
length = PrintNum(buf, num, 2, 0, width, ladjust, padc, 0);
|
||||
OUTPUT(arg, buf, length);
|
||||
break;
|
||||
|
||||
case 'd':
|
||||
case 'D':
|
||||
if (longFlag) {
|
||||
num = va_arg(ap, long int);
|
||||
} else {
|
||||
num = va_arg(ap, int);
|
||||
}
|
||||
if (num < 0) {
|
||||
num = - num;
|
||||
negFlag = 1;
|
||||
}
|
||||
length = PrintNum(buf, num, 10, negFlag, width, ladjust, padc, 0);
|
||||
OUTPUT(arg, buf, length);
|
||||
break;
|
||||
|
||||
case 'o':
|
||||
case 'O':
|
||||
if (longFlag) {
|
||||
num = va_arg(ap, long int);
|
||||
} else {
|
||||
num = va_arg(ap, int);
|
||||
}
|
||||
length = PrintNum(buf, num, 8, 0, width, ladjust, padc, 0);
|
||||
OUTPUT(arg, buf, length);
|
||||
break;
|
||||
|
||||
case 'u':
|
||||
case 'U':
|
||||
if (longFlag) {
|
||||
num = va_arg(ap, long int);
|
||||
} else {
|
||||
num = va_arg(ap, int);
|
||||
}
|
||||
length = PrintNum(buf, num, 10, 0, width, ladjust, padc, 0);
|
||||
OUTPUT(arg, buf, length);
|
||||
break;
|
||||
|
||||
case 'x':
|
||||
if (longFlag) {
|
||||
num = va_arg(ap, long int);
|
||||
} else {
|
||||
num = va_arg(ap, int);
|
||||
}
|
||||
length = PrintNum(buf, num, 16, 0, width, ladjust, padc, 0);
|
||||
OUTPUT(arg, buf, length);
|
||||
break;
|
||||
|
||||
case 'X':
|
||||
if (longFlag) {
|
||||
num = va_arg(ap, long int);
|
||||
} else {
|
||||
num = va_arg(ap, int);
|
||||
}
|
||||
length = PrintNum(buf, num, 16, 0, width, ladjust, padc, 1);
|
||||
OUTPUT(arg, buf, length);
|
||||
break;
|
||||
|
||||
case 'c':
|
||||
c = (char)va_arg(ap, int);
|
||||
length = PrintChar(buf, c, width, ladjust);
|
||||
OUTPUT(arg, buf, length);
|
||||
break;
|
||||
|
||||
case 's':
|
||||
s = (char*)va_arg(ap, char *);
|
||||
length = PrintString(buf, s, width, ladjust);
|
||||
OUTPUT(arg, buf, length);
|
||||
break;
|
||||
|
||||
case '\0':
|
||||
fmt --;
|
||||
break;
|
||||
|
||||
default:
|
||||
/* output this char as it is */
|
||||
OUTPUT(arg, fmt, 1);
|
||||
} /* switch (*fmt) */
|
||||
|
||||
fmt ++;
|
||||
} /* for(;;) */
|
||||
|
||||
/* special termination call */
|
||||
OUTPUT(arg, "\0", 1);
|
||||
}
|
||||
|
||||
|
||||
/* --------------- local help functions --------------------- */
|
||||
static int
|
||||
PrintChar(char * buf, char c, int length, int ladjust)
|
||||
{
|
||||
int i;
|
||||
|
||||
if (length < 1) length = 1;
|
||||
if (ladjust) {
|
||||
*buf = c;
|
||||
for (i=1; i< length; i++) buf[i] = ' ';
|
||||
} else {
|
||||
for (i=0; i< length-1; i++) buf[i] = ' ';
|
||||
buf[length - 1] = c;
|
||||
}
|
||||
return length;
|
||||
}
|
||||
|
||||
static int
|
||||
PrintString(char * buf, char* s, int length, int ladjust)
|
||||
{
|
||||
int i;
|
||||
int len=0;
|
||||
char* s1 = s;
|
||||
while (*s1++) len++;
|
||||
if (length < len) length = len;
|
||||
|
||||
if (ladjust) {
|
||||
for (i=0; i< len; i++) buf[i] = s[i];
|
||||
for (i=len; i< length; i++) buf[i] = ' ';
|
||||
} else {
|
||||
for (i=0; i< length-len; i++) buf[i] = ' ';
|
||||
for (i=length-len; i < length; i++) buf[i] = s[i-length+len];
|
||||
}
|
||||
return length;
|
||||
}
|
||||
|
||||
static int
|
||||
PrintNum(char * buf, unsigned long u, int base, int negFlag,
|
||||
int length, int ladjust, char padc, int upcase)
|
||||
{
|
||||
/* algorithm :
|
||||
* 1. prints the number from left to right in reverse form.
|
||||
* 2. fill the remaining spaces with padc if length is longer than
|
||||
* the actual length
|
||||
* TRICKY : if left adjusted, no "0" padding.
|
||||
* if negtive, insert "0" padding between "0" and number.
|
||||
* 3. if (!ladjust) we reverse the whole string including paddings
|
||||
* 4. otherwise we only reverse the actual string representing the num.
|
||||
*/
|
||||
|
||||
int actualLength =0;
|
||||
char *p = buf;
|
||||
int i;
|
||||
|
||||
do {
|
||||
int tmp = u %base;
|
||||
if (tmp <= 9) {
|
||||
*p++ = '0' + tmp;
|
||||
} else if (upcase) {
|
||||
*p++ = 'A' + tmp - 10;
|
||||
} else {
|
||||
*p++ = 'a' + tmp - 10;
|
||||
}
|
||||
u /= base;
|
||||
} while (u != 0);
|
||||
|
||||
if (negFlag) {
|
||||
*p++ = '-';
|
||||
}
|
||||
|
||||
/* figure out actual length and adjust the maximum length */
|
||||
actualLength = p - buf;
|
||||
if (length < actualLength) length = actualLength;
|
||||
|
||||
/* add padding */
|
||||
if (ladjust) {
|
||||
padc = ' ';
|
||||
}
|
||||
if (negFlag && !ladjust && (padc == '0')) {
|
||||
for (i = actualLength-1; i< length-1; i++) buf[i] = padc;
|
||||
buf[length -1] = '-';
|
||||
} else {
|
||||
for (i = actualLength; i< length; i++) buf[i] = padc;
|
||||
}
|
||||
|
||||
|
||||
/* prepare to reverse the string */
|
||||
{
|
||||
int begin = 0;
|
||||
int end;
|
||||
if (ladjust) {
|
||||
end = actualLength - 1;
|
||||
} else {
|
||||
end = length -1;
|
||||
}
|
||||
|
||||
while (end > begin) {
|
||||
char tmp = buf[begin];
|
||||
buf[begin] = buf[end];
|
||||
buf[end] = tmp;
|
||||
begin ++;
|
||||
end --;
|
||||
}
|
||||
}
|
||||
|
||||
/* adjust the string pointer */
|
||||
return length;
|
||||
}
|
||||
|
||||
static void printf_output(void *arg, char *s, int l)
|
||||
{
|
||||
int i;
|
||||
|
||||
// special termination call
|
||||
if ((l==1) && (s[0] == '\0')) return;
|
||||
|
||||
for (i=0; i< l; i++) {
|
||||
board_putc(s[i]);
|
||||
if (s[i] == '\n') board_putc('\r');
|
||||
}
|
||||
}
|
||||
|
||||
void printf(char *fmt, ...)
|
||||
{
|
||||
va_list ap;
|
||||
va_start(ap, fmt);
|
||||
lp_Print(printf_output, 0, fmt, ap);
|
||||
va_end(ap);
|
||||
}
|
||||
|
|
@ -0,0 +1,18 @@
|
|||
/*
|
||||
* Copyright (C) 2001 MontaVista Software Inc.
|
||||
* Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the
|
||||
* Free Software Foundation; either version 2 of the License, or (at your
|
||||
* option) any later version.
|
||||
*
|
||||
*/
|
||||
|
||||
#ifndef _printf_h_
|
||||
#define _printf_h_
|
||||
|
||||
#include <stdarg.h>
|
||||
void printf(char *fmt, ...);
|
||||
|
||||
#endif /* _printf_h_ */
|
||||
|
|
@ -0,0 +1 @@
|
|||
CACHE_FLAGS+=-DCONFIG_ICACHE_SIZE="(32 * 1024)" -DCONFIG_DCACHE_SIZE="(16 * 1024)" -DCONFIG_CACHELINE_SIZE=32
|
||||
|
|
@ -0,0 +1,168 @@
|
|||
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
|
||||
CONFIG_ARCH_DISCARD_MEMBLOCK=y
|
||||
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
|
||||
CONFIG_ARCH_HAS_RESET_CONTROLLER=y
|
||||
CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
|
||||
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
|
||||
CONFIG_ARCH_REQUIRE_GPIOLIB=y
|
||||
CONFIG_ARCH_SUSPEND_POSSIBLE=y
|
||||
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
|
||||
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
|
||||
CONFIG_CEVT_R4K=y
|
||||
CONFIG_CLKDEV_LOOKUP=y
|
||||
CONFIG_CLKEVT_RT3352=y
|
||||
CONFIG_CLKSRC_MMIO=y
|
||||
CONFIG_CLKSRC_OF=y
|
||||
CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
|
||||
CONFIG_CMDLINE_BOOL=y
|
||||
# CONFIG_CMDLINE_OVERRIDE is not set
|
||||
CONFIG_CPU_GENERIC_DUMP_TLB=y
|
||||
CONFIG_CPU_HAS_PREFETCH=y
|
||||
CONFIG_CPU_HAS_SYNC=y
|
||||
CONFIG_CPU_LITTLE_ENDIAN=y
|
||||
CONFIG_CPU_MIPS32=y
|
||||
# CONFIG_CPU_MIPS32_R1 is not set
|
||||
CONFIG_CPU_MIPS32_R2=y
|
||||
CONFIG_CPU_MIPSR2=y
|
||||
CONFIG_CPU_R4K_CACHE_TLB=y
|
||||
CONFIG_CPU_R4K_FPU=y
|
||||
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
|
||||
CONFIG_CPU_SUPPORTS_HIGHMEM=y
|
||||
CONFIG_CSRC_R4K=y
|
||||
CONFIG_DECOMPRESS_LZMA=y
|
||||
CONFIG_DMA_NONCOHERENT=y
|
||||
# CONFIG_DTB_MT7620A_EVAL is not set
|
||||
# CONFIG_DTB_MT7620A_MT7610E_EVAL is not set
|
||||
CONFIG_DTB_RT_NONE=y
|
||||
CONFIG_DTC=y
|
||||
CONFIG_EARLY_PRINTK=y
|
||||
CONFIG_GENERIC_ATOMIC64=y
|
||||
CONFIG_GENERIC_CLOCKEVENTS=y
|
||||
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
|
||||
CONFIG_GENERIC_CMOS_UPDATE=y
|
||||
CONFIG_GENERIC_GPIO=y
|
||||
CONFIG_GENERIC_IO=y
|
||||
CONFIG_GENERIC_IRQ_SHOW=y
|
||||
CONFIG_GENERIC_PCI_IOMAP=y
|
||||
CONFIG_GENERIC_SMP_IDLE_THREAD=y
|
||||
CONFIG_GPIOLIB=y
|
||||
CONFIG_GPIO_RALINK=y
|
||||
CONFIG_GPIO_SYSFS=y
|
||||
CONFIG_HARDWARE_WATCHPOINTS=y
|
||||
CONFIG_HAS_DMA=y
|
||||
CONFIG_HAS_IOMEM=y
|
||||
CONFIG_HAS_IOPORT=y
|
||||
CONFIG_HAVE_ARCH_JUMP_LABEL=y
|
||||
CONFIG_HAVE_ARCH_KGDB=y
|
||||
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
|
||||
CONFIG_HAVE_CLK=y
|
||||
CONFIG_HAVE_C_RECORDMCOUNT=y
|
||||
CONFIG_HAVE_DEBUG_KMEMLEAK=y
|
||||
CONFIG_HAVE_DMA_API_DEBUG=y
|
||||
CONFIG_HAVE_DMA_ATTRS=y
|
||||
CONFIG_HAVE_DYNAMIC_FTRACE=y
|
||||
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
|
||||
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
|
||||
CONFIG_HAVE_FUNCTION_TRACER=y
|
||||
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
|
||||
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
|
||||
CONFIG_HAVE_GENERIC_HARDIRQS=y
|
||||
CONFIG_HAVE_IDE=y
|
||||
CONFIG_HAVE_IRQ_WORK=y
|
||||
CONFIG_HAVE_MACH_CLKDEV=y
|
||||
CONFIG_HAVE_MEMBLOCK=y
|
||||
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
|
||||
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
|
||||
CONFIG_HAVE_NET_DSA=y
|
||||
CONFIG_HAVE_OPROFILE=y
|
||||
CONFIG_HAVE_PERF_EVENTS=y
|
||||
CONFIG_HW_HAS_PCI=y
|
||||
CONFIG_HW_RANDOM=m
|
||||
CONFIG_IMAGE_CMDLINE_HACK=y
|
||||
CONFIG_INITRAMFS_SOURCE=""
|
||||
CONFIG_IRQ_CPU=y
|
||||
CONFIG_IRQ_DOMAIN=y
|
||||
CONFIG_IRQ_FORCED_THREADING=y
|
||||
CONFIG_M25PXX_USE_FAST_READ=y
|
||||
CONFIG_MDIO_BOARDINFO=y
|
||||
# CONFIG_MII is not set
|
||||
CONFIG_MIPS=y
|
||||
# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
|
||||
CONFIG_MIPS_L1_CACHE_SHIFT=5
|
||||
# CONFIG_MIPS_MACHINE is not set
|
||||
CONFIG_MIPS_MT_DISABLED=y
|
||||
CONFIG_MMC=y
|
||||
CONFIG_MMC_BLOCK=y
|
||||
CONFIG_MMC_SDHCI=y
|
||||
CONFIG_MMC_SDHCI_IO_ACCESSORS=y
|
||||
CONFIG_MMC_SDHCI_MT7620=y
|
||||
# CONFIG_MMC_SDHCI_PCI is not set
|
||||
CONFIG_MMC_SDHCI_PLTFM=y
|
||||
# CONFIG_MMC_TIFM_SD is not set
|
||||
CONFIG_MODULES_USE_ELF_REL=y
|
||||
# CONFIG_MTD_CFI_INTELEXT is not set
|
||||
CONFIG_MTD_CMDLINE_PARTS=y
|
||||
CONFIG_MTD_M25P80=y
|
||||
CONFIG_MTD_OF_PARTS=y
|
||||
CONFIG_MTD_PHYSMAP=y
|
||||
CONFIG_MTD_PHYSMAP_OF=y
|
||||
CONFIG_MTD_UIMAGE_SPLIT=y
|
||||
CONFIG_NEED_DMA_MAP_STATE=y
|
||||
CONFIG_NEED_PER_CPU_KM=y
|
||||
CONFIG_NET_RALINK=y
|
||||
CONFIG_NET_RALINK_GSW_MT7620=y
|
||||
CONFIG_NET_RALINK_MDIO=y
|
||||
CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
|
||||
CONFIG_OF=y
|
||||
CONFIG_OF_ADDRESS=y
|
||||
CONFIG_OF_DEVICE=y
|
||||
CONFIG_OF_EARLY_FLATTREE=y
|
||||
CONFIG_OF_FLATTREE=y
|
||||
CONFIG_OF_GPIO=y
|
||||
CONFIG_OF_IRQ=y
|
||||
CONFIG_OF_MDIO=y
|
||||
CONFIG_OF_MTD=y
|
||||
CONFIG_OF_NET=y
|
||||
CONFIG_OF_PCI=y
|
||||
CONFIG_OF_PCI_IRQ=y
|
||||
CONFIG_PAGEFLAGS_EXTENDED=y
|
||||
CONFIG_PCI=y
|
||||
# CONFIG_PCIEAER is not set
|
||||
CONFIG_PCIEPORTBUS=y
|
||||
CONFIG_PCI_DOMAINS=y
|
||||
CONFIG_PERCPU_RWSEM=y
|
||||
CONFIG_PERF_USE_VMALLOC=y
|
||||
CONFIG_PHYLIB=y
|
||||
# CONFIG_PREEMPT_RCU is not set
|
||||
CONFIG_RALINK=y
|
||||
CONFIG_RALINK_USBPHY=y
|
||||
CONFIG_RALINK_WDT=y
|
||||
CONFIG_RESET_CONTROLLER=y
|
||||
# CONFIG_SCSI_DMA is not set
|
||||
CONFIG_SERIAL_8250_NR_UARTS=4
|
||||
CONFIG_SERIAL_8250_RT288X=y
|
||||
CONFIG_SERIAL_OF_PLATFORM=y
|
||||
# CONFIG_SLAB is not set
|
||||
CONFIG_SLUB=y
|
||||
CONFIG_SOC_MT7620=y
|
||||
# CONFIG_SOC_RT288X is not set
|
||||
# CONFIG_SOC_RT305X is not set
|
||||
# CONFIG_SOC_RT3883 is not set
|
||||
CONFIG_SPI=y
|
||||
CONFIG_SPI_MASTER=y
|
||||
CONFIG_SPI_RALINK=y
|
||||
CONFIG_SWCONFIG=y
|
||||
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
|
||||
CONFIG_SYS_HAS_CPU_MIPS32_R2=y
|
||||
CONFIG_SYS_HAS_EARLY_PRINTK=y
|
||||
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
|
||||
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
|
||||
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
|
||||
CONFIG_TICK_CPU_ACCOUNTING=y
|
||||
CONFIG_UIDGID_CONVERTED=y
|
||||
CONFIG_USB_ARCH_HAS_XHCI=y
|
||||
CONFIG_USB_OTG_UTILS=y
|
||||
CONFIG_USB_SUPPORT=y
|
||||
CONFIG_USE_OF=y
|
||||
CONFIG_WATCHDOG_CORE=y
|
||||
CONFIG_ZONE_DMA_FLAG=0
|
||||
|
|
@ -0,0 +1,172 @@
|
|||
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
|
||||
CONFIG_ARCH_DISCARD_MEMBLOCK=y
|
||||
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
|
||||
CONFIG_ARCH_HAS_RESET_CONTROLLER=y
|
||||
CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
|
||||
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
|
||||
CONFIG_ARCH_REQUIRE_GPIOLIB=y
|
||||
CONFIG_ARCH_SUSPEND_POSSIBLE=y
|
||||
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
|
||||
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
|
||||
CONFIG_CEVT_R4K=y
|
||||
CONFIG_CLKDEV_LOOKUP=y
|
||||
CONFIG_CLKEVT_RT3352=y
|
||||
CONFIG_CLKSRC_MMIO=y
|
||||
CONFIG_CLKSRC_OF=y
|
||||
CONFIG_CLONE_BACKWARDS=y
|
||||
CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
|
||||
CONFIG_CMDLINE_BOOL=y
|
||||
# CONFIG_CMDLINE_OVERRIDE is not set
|
||||
CONFIG_CPU_GENERIC_DUMP_TLB=y
|
||||
CONFIG_CPU_HAS_PREFETCH=y
|
||||
CONFIG_CPU_HAS_SYNC=y
|
||||
CONFIG_CPU_LITTLE_ENDIAN=y
|
||||
CONFIG_CPU_MIPS32=y
|
||||
# CONFIG_CPU_MIPS32_R1 is not set
|
||||
CONFIG_CPU_MIPS32_R2=y
|
||||
CONFIG_CPU_MIPSR2=y
|
||||
CONFIG_CPU_R4K_CACHE_TLB=y
|
||||
CONFIG_CPU_R4K_FPU=y
|
||||
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
|
||||
CONFIG_CPU_SUPPORTS_HIGHMEM=y
|
||||
CONFIG_CSRC_R4K=y
|
||||
CONFIG_DECOMPRESS_LZMA=y
|
||||
CONFIG_DMA_NONCOHERENT=y
|
||||
# CONFIG_DTB_MT7620A_EVAL is not set
|
||||
# CONFIG_DTB_MT7620A_MT7610E_EVAL is not set
|
||||
CONFIG_DTB_RT_NONE=y
|
||||
CONFIG_DTC=y
|
||||
CONFIG_EARLY_PRINTK=y
|
||||
CONFIG_GENERIC_ATOMIC64=y
|
||||
CONFIG_GENERIC_CLOCKEVENTS=y
|
||||
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
|
||||
CONFIG_GENERIC_CMOS_UPDATE=y
|
||||
CONFIG_GENERIC_GPIO=y
|
||||
CONFIG_GENERIC_IO=y
|
||||
CONFIG_GENERIC_IRQ_SHOW=y
|
||||
CONFIG_GENERIC_PCI_IOMAP=y
|
||||
CONFIG_GENERIC_SMP_IDLE_THREAD=y
|
||||
CONFIG_GPIOLIB=y
|
||||
CONFIG_GPIO_DEVRES=y
|
||||
CONFIG_GPIO_RALINK=y
|
||||
CONFIG_GPIO_SYSFS=y
|
||||
CONFIG_HARDWARE_WATCHPOINTS=y
|
||||
CONFIG_HAS_DMA=y
|
||||
CONFIG_HAS_IOMEM=y
|
||||
CONFIG_HAS_IOPORT=y
|
||||
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
|
||||
CONFIG_HAVE_ARCH_JUMP_LABEL=y
|
||||
CONFIG_HAVE_ARCH_KGDB=y
|
||||
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
|
||||
CONFIG_HAVE_CLK=y
|
||||
CONFIG_HAVE_C_RECORDMCOUNT=y
|
||||
CONFIG_HAVE_DEBUG_KMEMLEAK=y
|
||||
CONFIG_HAVE_DMA_API_DEBUG=y
|
||||
CONFIG_HAVE_DMA_ATTRS=y
|
||||
CONFIG_HAVE_DYNAMIC_FTRACE=y
|
||||
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
|
||||
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
|
||||
CONFIG_HAVE_FUNCTION_TRACER=y
|
||||
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
|
||||
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
|
||||
CONFIG_HAVE_GENERIC_HARDIRQS=y
|
||||
CONFIG_HAVE_IDE=y
|
||||
CONFIG_HAVE_MACH_CLKDEV=y
|
||||
CONFIG_HAVE_MEMBLOCK=y
|
||||
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
|
||||
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
|
||||
CONFIG_HAVE_NET_DSA=y
|
||||
CONFIG_HAVE_OPROFILE=y
|
||||
CONFIG_HAVE_PERF_EVENTS=y
|
||||
CONFIG_HW_HAS_PCI=y
|
||||
CONFIG_HW_RANDOM=m
|
||||
CONFIG_IMAGE_CMDLINE_HACK=y
|
||||
CONFIG_INITRAMFS_SOURCE=""
|
||||
CONFIG_IRQCHIP=y
|
||||
CONFIG_IRQ_CPU=y
|
||||
CONFIG_IRQ_DOMAIN=y
|
||||
CONFIG_IRQ_FORCED_THREADING=y
|
||||
CONFIG_IRQ_WORK=y
|
||||
CONFIG_M25PXX_USE_FAST_READ=y
|
||||
CONFIG_MDIO_BOARDINFO=y
|
||||
# CONFIG_MII is not set
|
||||
CONFIG_MIPS=y
|
||||
# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
|
||||
CONFIG_MIPS_L1_CACHE_SHIFT=5
|
||||
# CONFIG_MIPS_MACHINE is not set
|
||||
CONFIG_MIPS_MT_DISABLED=y
|
||||
CONFIG_MMC=y
|
||||
CONFIG_MMC_BLOCK=y
|
||||
CONFIG_MMC_SDHCI=y
|
||||
CONFIG_MMC_SDHCI_IO_ACCESSORS=y
|
||||
CONFIG_MMC_SDHCI_MT7620=y
|
||||
# CONFIG_MMC_SDHCI_PCI is not set
|
||||
CONFIG_MMC_SDHCI_PLTFM=y
|
||||
# CONFIG_MMC_TIFM_SD is not set
|
||||
CONFIG_MODULES_USE_ELF_REL=y
|
||||
# CONFIG_MTD_CFI_INTELEXT is not set
|
||||
CONFIG_MTD_CMDLINE_PARTS=y
|
||||
CONFIG_MTD_M25P80=y
|
||||
CONFIG_MTD_OF_PARTS=y
|
||||
CONFIG_MTD_PHYSMAP=y
|
||||
CONFIG_MTD_PHYSMAP_OF=y
|
||||
CONFIG_MTD_UIMAGE_SPLIT=y
|
||||
CONFIG_NEED_DMA_MAP_STATE=y
|
||||
CONFIG_NEED_PER_CPU_KM=y
|
||||
CONFIG_NET_RALINK=y
|
||||
CONFIG_NET_RALINK_GSW_MT7620=y
|
||||
CONFIG_NET_RALINK_MDIO=y
|
||||
CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
|
||||
CONFIG_OF=y
|
||||
CONFIG_OF_ADDRESS=y
|
||||
CONFIG_OF_DEVICE=y
|
||||
# CONFIG_OF_DISPLAY_TIMING is not set
|
||||
CONFIG_OF_EARLY_FLATTREE=y
|
||||
CONFIG_OF_FLATTREE=y
|
||||
CONFIG_OF_GPIO=y
|
||||
CONFIG_OF_IRQ=y
|
||||
CONFIG_OF_MDIO=y
|
||||
CONFIG_OF_MTD=y
|
||||
CONFIG_OF_NET=y
|
||||
CONFIG_OF_PCI=y
|
||||
CONFIG_OF_PCI_IRQ=y
|
||||
# CONFIG_OF_VIDEOMODE is not set
|
||||
CONFIG_PAGEFLAGS_EXTENDED=y
|
||||
CONFIG_PCI=y
|
||||
CONFIG_PCI_DOMAINS=y
|
||||
CONFIG_PERF_USE_VMALLOC=y
|
||||
CONFIG_PHYLIB=y
|
||||
# CONFIG_PREEMPT_RCU is not set
|
||||
CONFIG_RALINK=y
|
||||
CONFIG_RALINK_USBPHY=y
|
||||
CONFIG_RALINK_WDT=y
|
||||
# CONFIG_RCU_STALL_COMMON is not set
|
||||
CONFIG_RESET_CONTROLLER=y
|
||||
# CONFIG_SCSI_DMA is not set
|
||||
CONFIG_SERIAL_8250_NR_UARTS=4
|
||||
CONFIG_SERIAL_8250_RT288X=y
|
||||
CONFIG_SERIAL_OF_PLATFORM=y
|
||||
# CONFIG_SLAB is not set
|
||||
CONFIG_SLUB=y
|
||||
CONFIG_SOC_MT7620=y
|
||||
# CONFIG_SOC_RT288X is not set
|
||||
# CONFIG_SOC_RT305X is not set
|
||||
# CONFIG_SOC_RT3883 is not set
|
||||
CONFIG_SPI=y
|
||||
CONFIG_SPI_MASTER=y
|
||||
CONFIG_SPI_RALINK=y
|
||||
CONFIG_SWCONFIG=y
|
||||
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
|
||||
CONFIG_SYS_HAS_CPU_MIPS32_R2=y
|
||||
CONFIG_SYS_HAS_EARLY_PRINTK=y
|
||||
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
|
||||
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
|
||||
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
|
||||
CONFIG_TICK_CPU_ACCOUNTING=y
|
||||
CONFIG_UIDGID_CONVERTED=y
|
||||
CONFIG_USB_ARCH_HAS_XHCI=y
|
||||
CONFIG_USB_OTG_UTILS=y
|
||||
CONFIG_USB_SUPPORT=y
|
||||
CONFIG_USE_OF=y
|
||||
CONFIG_WATCHDOG_CORE=y
|
||||
CONFIG_ZONE_DMA_FLAG=0
|
||||
|
|
@ -0,0 +1,18 @@
|
|||
#
|
||||
# Copyright (C) 2011 OpenWrt.org
|
||||
#
|
||||
# This is free software, licensed under the GNU General Public License v2.
|
||||
# See /LICENSE for more information.
|
||||
#
|
||||
|
||||
define Profile/Default
|
||||
NAME:=Default Profile
|
||||
PACKAGES:=\
|
||||
kmod-usb-core kmod-usb-rt305x-dwc_otg \
|
||||
kmod-ledtrig-usbdev
|
||||
endef
|
||||
|
||||
define Profile/Default/Description
|
||||
Default package set compatible with most boards.
|
||||
endef
|
||||
$(eval $(call Profile,Default))
|
||||
|
|
@ -0,0 +1,14 @@
|
|||
#
|
||||
# Copyright (C) 2009 OpenWrt.org
|
||||
#
|
||||
|
||||
SUBTARGET:=mt7620a
|
||||
BOARDNAME:=MT7620a based boards
|
||||
ARCH_PACKAGES:=ramips_24kec
|
||||
FEATURES+=usb
|
||||
CFLAGS+= -march=24kec -mdsp
|
||||
|
||||
define Target/Description
|
||||
Build firmware images for Ralink MT7620a based boards.
|
||||
endef
|
||||
|
||||
|
|
@ -1,7 +1,7 @@
|
|||
From 8563991026ee98bb5e477167236972a45dfea0e3 Mon Sep 17 00:00:00 2001
|
||||
From 72bd3fcd16225f46ca318435a4d8f3f3f154b1bc Mon Sep 17 00:00:00 2001
|
||||
From: John Crispin <blogic@openwrt.org>
|
||||
Date: Mon, 21 Jan 2013 18:25:59 +0100
|
||||
Subject: [PATCH 01/14] MIPS: ralink: adds include files
|
||||
Subject: [PATCH 01/79] MIPS: ralink: adds include files
|
||||
|
||||
Before we start adding the platform code we add the common include files.
|
||||
|
||||
|
|
@ -17,6 +17,9 @@ Patchwork: http://patchwork.linux-mips.org/patch/4893/
|
|||
create mode 100644 arch/mips/include/asm/mach-ralink/war.h
|
||||
create mode 100644 arch/mips/ralink/common.h
|
||||
|
||||
diff --git a/arch/mips/include/asm/mach-ralink/ralink_regs.h b/arch/mips/include/asm/mach-ralink/ralink_regs.h
|
||||
new file mode 100644
|
||||
index 0000000..5a508f9
|
||||
--- /dev/null
|
||||
+++ b/arch/mips/include/asm/mach-ralink/ralink_regs.h
|
||||
@@ -0,0 +1,39 @@
|
||||
|
|
@ -59,6 +62,9 @@ Patchwork: http://patchwork.linux-mips.org/patch/4893/
|
|||
+}
|
||||
+
|
||||
+#endif /* _RALINK_REGS_H_ */
|
||||
diff --git a/arch/mips/include/asm/mach-ralink/war.h b/arch/mips/include/asm/mach-ralink/war.h
|
||||
new file mode 100644
|
||||
index 0000000..a7b712c
|
||||
--- /dev/null
|
||||
+++ b/arch/mips/include/asm/mach-ralink/war.h
|
||||
@@ -0,0 +1,25 @@
|
||||
|
|
@ -87,6 +93,9 @@ Patchwork: http://patchwork.linux-mips.org/patch/4893/
|
|||
+#define MIPS34K_MISSED_ITLB_WAR 0
|
||||
+
|
||||
+#endif /* __ASM_MACH_RALINK_WAR_H */
|
||||
diff --git a/arch/mips/ralink/common.h b/arch/mips/ralink/common.h
|
||||
new file mode 100644
|
||||
index 0000000..3009903
|
||||
--- /dev/null
|
||||
+++ b/arch/mips/ralink/common.h
|
||||
@@ -0,0 +1,44 @@
|
||||
|
|
@ -134,3 +143,6 @@ Patchwork: http://patchwork.linux-mips.org/patch/4893/
|
|||
+__iomem void *plat_of_remap_node(const char *node);
|
||||
+
|
||||
+#endif /* _RALINK_COMMON_H__ */
|
||||
--
|
||||
1.7.10.4
|
||||
|
||||
|
|
|
|||
|
|
@ -1,7 +1,7 @@
|
|||
From 19d3814e7b325f8965fd71f329b3467a97f8d217 Mon Sep 17 00:00:00 2001
|
||||
From 833836f47b4191e93267b91fcab38dd15affcd28 Mon Sep 17 00:00:00 2001
|
||||
From: John Crispin <blogic@openwrt.org>
|
||||
Date: Sun, 20 Jan 2013 22:00:50 +0100
|
||||
Subject: [PATCH 02/14] MIPS: ralink: adds irq code
|
||||
Subject: [PATCH 02/79] MIPS: ralink: adds irq code
|
||||
|
||||
All of the Ralink Wifi SoC currently supported by this series share the same
|
||||
interrupt controller (INTC).
|
||||
|
|
@ -14,6 +14,9 @@ Patchwork: http://patchwork.linux-mips.org/patch/4890/
|
|||
1 file changed, 176 insertions(+)
|
||||
create mode 100644 arch/mips/ralink/irq.c
|
||||
|
||||
diff --git a/arch/mips/ralink/irq.c b/arch/mips/ralink/irq.c
|
||||
new file mode 100644
|
||||
index 0000000..e62c975
|
||||
--- /dev/null
|
||||
+++ b/arch/mips/ralink/irq.c
|
||||
@@ -0,0 +1,176 @@
|
||||
|
|
@ -193,3 +196,6 @@ Patchwork: http://patchwork.linux-mips.org/patch/4890/
|
|||
+ of_irq_init(of_irq_ids);
|
||||
+}
|
||||
+
|
||||
--
|
||||
1.7.10.4
|
||||
|
||||
|
|
|
|||
|
|
@ -1,7 +1,7 @@
|
|||
From c06e836ada59fbc6d1109277e693e5b3e056ac12 Mon Sep 17 00:00:00 2001
|
||||
From 3cdf3d713c81ffd3032d7c664f0be89d1ddce3e3 Mon Sep 17 00:00:00 2001
|
||||
From: John Crispin <blogic@openwrt.org>
|
||||
Date: Sun, 20 Jan 2013 22:00:57 +0100
|
||||
Subject: [PATCH 03/14] MIPS: ralink: adds reset code
|
||||
Subject: [PATCH 03/79] MIPS: ralink: adds reset code
|
||||
|
||||
Resetting these SoCs requires no real magic. The code is straight forward.
|
||||
|
||||
|
|
@ -13,6 +13,9 @@ Patchwork: http://patchwork.linux-mips.org/patch/4891/
|
|||
1 file changed, 44 insertions(+)
|
||||
create mode 100644 arch/mips/ralink/reset.c
|
||||
|
||||
diff --git a/arch/mips/ralink/reset.c b/arch/mips/ralink/reset.c
|
||||
new file mode 100644
|
||||
index 0000000..22120e5
|
||||
--- /dev/null
|
||||
+++ b/arch/mips/ralink/reset.c
|
||||
@@ -0,0 +1,44 @@
|
||||
|
|
@ -60,3 +63,6 @@ Patchwork: http://patchwork.linux-mips.org/patch/4891/
|
|||
+}
|
||||
+
|
||||
+arch_initcall(mips_reboot_setup);
|
||||
--
|
||||
1.7.10.4
|
||||
|
||||
|
|
|
|||
|
|
@ -1,7 +1,7 @@
|
|||
From 7e47cefa69c8ed2c889522ce29fcce73ce8cf08e Mon Sep 17 00:00:00 2001
|
||||
From 36424b3f1f184c752562d19d0df1a427c8c584a2 Mon Sep 17 00:00:00 2001
|
||||
From: John Crispin <blogic@openwrt.org>
|
||||
Date: Sun, 20 Jan 2013 22:01:05 +0100
|
||||
Subject: [PATCH 04/14] MIPS: ralink: adds prom and cmdline code
|
||||
Subject: [PATCH 04/79] MIPS: ralink: adds prom and cmdline code
|
||||
|
||||
Add minimal code to handle commandlines.
|
||||
|
||||
|
|
@ -13,6 +13,9 @@ Patchwork: http://patchwork.linux-mips.org/patch/4892/
|
|||
1 file changed, 69 insertions(+)
|
||||
create mode 100644 arch/mips/ralink/prom.c
|
||||
|
||||
diff --git a/arch/mips/ralink/prom.c b/arch/mips/ralink/prom.c
|
||||
new file mode 100644
|
||||
index 0000000..9c64f02
|
||||
--- /dev/null
|
||||
+++ b/arch/mips/ralink/prom.c
|
||||
@@ -0,0 +1,69 @@
|
||||
|
|
@ -85,3 +88,6 @@ Patchwork: http://patchwork.linux-mips.org/patch/4892/
|
|||
+void __init prom_free_prom_memory(void)
|
||||
+{
|
||||
+}
|
||||
--
|
||||
1.7.10.4
|
||||
|
||||
|
|
|
|||
|
|
@ -1,7 +1,7 @@
|
|||
From 3f0a06b0368d25608841843e9d65a7289ad9f14a Mon Sep 17 00:00:00 2001
|
||||
From b99289db258ee8a84e1bd555b2897476acf390c1 Mon Sep 17 00:00:00 2001
|
||||
From: John Crispin <blogic@openwrt.org>
|
||||
Date: Sun, 20 Jan 2013 22:01:29 +0100
|
||||
Subject: [PATCH 05/14] MIPS: ralink: adds clkdev code
|
||||
Subject: [PATCH 05/79] MIPS: ralink: adds clkdev code
|
||||
|
||||
These SoCs have a limited number of fixed rate clocks. Add support for the
|
||||
clk and clkdev api.
|
||||
|
|
@ -14,6 +14,9 @@ Patchwork: http://patchwork.linux-mips.org/patch/4894/
|
|||
1 file changed, 72 insertions(+)
|
||||
create mode 100644 arch/mips/ralink/clk.c
|
||||
|
||||
diff --git a/arch/mips/ralink/clk.c b/arch/mips/ralink/clk.c
|
||||
new file mode 100644
|
||||
index 0000000..8dfa22f
|
||||
--- /dev/null
|
||||
+++ b/arch/mips/ralink/clk.c
|
||||
@@ -0,0 +1,72 @@
|
||||
|
|
@ -89,3 +92,6 @@ Patchwork: http://patchwork.linux-mips.org/patch/4894/
|
|||
+ mips_hpt_frequency = clk_get_rate(clk) / 2;
|
||||
+ clk_put(clk);
|
||||
+}
|
||||
--
|
||||
1.7.10.4
|
||||
|
||||
|
|
|
|||
|
|
@ -1,7 +1,7 @@
|
|||
From 3a5bfe7bdbfd37c9206d7c6dfd7eb9664ccc5038 Mon Sep 17 00:00:00 2001
|
||||
From 4b2f9abbbaf3463a0fc1a65afeb0d12f890ada35 Mon Sep 17 00:00:00 2001
|
||||
From: John Crispin <blogic@openwrt.org>
|
||||
Date: Sun, 20 Jan 2013 22:02:01 +0100
|
||||
Subject: [PATCH 06/14] MIPS: ralink: adds OF code
|
||||
Subject: [PATCH 06/79] MIPS: ralink: adds OF code
|
||||
|
||||
Until there is a generic MIPS way of handing the DTB over from bootloader to
|
||||
kernel we rely on a built in devicetrees. The OF code also remaps those register
|
||||
|
|
@ -15,6 +15,9 @@ Patchwork: http://patchwork.linux-mips.org/patch/4895/
|
|||
1 file changed, 107 insertions(+)
|
||||
create mode 100644 arch/mips/ralink/of.c
|
||||
|
||||
diff --git a/arch/mips/ralink/of.c b/arch/mips/ralink/of.c
|
||||
new file mode 100644
|
||||
index 0000000..4165e70
|
||||
--- /dev/null
|
||||
+++ b/arch/mips/ralink/of.c
|
||||
@@ -0,0 +1,107 @@
|
||||
|
|
@ -125,3 +128,6 @@ Patchwork: http://patchwork.linux-mips.org/patch/4895/
|
|||
+}
|
||||
+
|
||||
+arch_initcall(plat_of_setup);
|
||||
--
|
||||
1.7.10.4
|
||||
|
||||
|
|
|
|||
|
|
@ -1,7 +1,7 @@
|
|||
From 5fff610b7c60195de98e68bec00c357f393ce634 Mon Sep 17 00:00:00 2001
|
||||
From 4efba82d0e4059588f2b2fc0ac2576eaf37f1d22 Mon Sep 17 00:00:00 2001
|
||||
From: John Crispin <blogic@openwrt.org>
|
||||
Date: Sun, 20 Jan 2013 22:02:55 +0100
|
||||
Subject: [PATCH 07/14] MIPS: ralink: adds early_printk support
|
||||
Subject: [PATCH 07/79] MIPS: ralink: adds early_printk support
|
||||
|
||||
Add the code needed to make early printk work.
|
||||
|
||||
|
|
@ -13,6 +13,9 @@ Patchwork: http://patchwork.linux-mips.org/patch/4897/
|
|||
1 file changed, 44 insertions(+)
|
||||
create mode 100644 arch/mips/ralink/early_printk.c
|
||||
|
||||
diff --git a/arch/mips/ralink/early_printk.c b/arch/mips/ralink/early_printk.c
|
||||
new file mode 100644
|
||||
index 0000000..c4ae47e
|
||||
--- /dev/null
|
||||
+++ b/arch/mips/ralink/early_printk.c
|
||||
@@ -0,0 +1,44 @@
|
||||
|
|
@ -60,3 +63,6 @@ Patchwork: http://patchwork.linux-mips.org/patch/4897/
|
|||
+ while ((uart_r32(UART_REG_LSR) & UART_LSR_THRE) == 0)
|
||||
+ ;
|
||||
+}
|
||||
--
|
||||
1.7.10.4
|
||||
|
||||
|
|
|
|||
|
|
@ -1,7 +1,7 @@
|
|||
From 2809b31770d7fd934a748692e1922a5e613f06e5 Mon Sep 17 00:00:00 2001
|
||||
From 433f4f524aba81358353ca4ebc00c3e916521ec6 Mon Sep 17 00:00:00 2001
|
||||
From: John Crispin <blogic@openwrt.org>
|
||||
Date: Sun, 20 Jan 2013 22:03:46 +0100
|
||||
Subject: [PATCH 08/14] MIPS: ralink: adds support for RT305x SoC family
|
||||
Subject: [PATCH 08/79] MIPS: ralink: adds support for RT305x SoC family
|
||||
|
||||
Add support code for rt3050, rt3052, rt3350, rt3352 and rt5350 SOC.
|
||||
|
||||
|
|
@ -17,6 +17,9 @@ Patchwork: http://patchwork.linux-mips.org/patch/4896/
|
|||
create mode 100644 arch/mips/include/asm/mach-ralink/rt305x.h
|
||||
create mode 100644 arch/mips/ralink/rt305x.c
|
||||
|
||||
diff --git a/arch/mips/include/asm/mach-ralink/rt305x.h b/arch/mips/include/asm/mach-ralink/rt305x.h
|
||||
new file mode 100644
|
||||
index 0000000..7d344f2
|
||||
--- /dev/null
|
||||
+++ b/arch/mips/include/asm/mach-ralink/rt305x.h
|
||||
@@ -0,0 +1,139 @@
|
||||
|
|
@ -159,6 +162,9 @@ Patchwork: http://patchwork.linux-mips.org/patch/4896/
|
|||
+#define RT305X_GPIO_MODE_RGMII BIT(9)
|
||||
+
|
||||
+#endif
|
||||
diff --git a/arch/mips/ralink/rt305x.c b/arch/mips/ralink/rt305x.c
|
||||
new file mode 100644
|
||||
index 0000000..0a4bbdc
|
||||
--- /dev/null
|
||||
+++ b/arch/mips/ralink/rt305x.c
|
||||
@@ -0,0 +1,242 @@
|
||||
|
|
@ -404,3 +410,6 @@ Patchwork: http://patchwork.linux-mips.org/patch/4896/
|
|||
+ (id >> CHIP_ID_ID_SHIFT) & CHIP_ID_ID_MASK,
|
||||
+ (id & CHIP_ID_REV_MASK));
|
||||
+}
|
||||
--
|
||||
1.7.10.4
|
||||
|
||||
|
|
|
|||
|
|
@ -1,7 +1,7 @@
|
|||
From 5644da4f635a30fc03b4f12d81b2197d716d9cef Mon Sep 17 00:00:00 2001
|
||||
From 8208a43c301d9164802dedeec7455dbdd70ca286 Mon Sep 17 00:00:00 2001
|
||||
From: John Crispin <blogic@openwrt.org>
|
||||
Date: Tue, 22 Jan 2013 20:19:33 +0100
|
||||
Subject: [PATCH 09/14] MIPS: ralink: adds rt305x devicetree
|
||||
Subject: [PATCH 09/79] MIPS: ralink: adds rt305x devicetree
|
||||
|
||||
This adds the devicetree file that describes the rt305x evaluation kit.
|
||||
|
||||
|
|
@ -15,6 +15,9 @@ Patchwork: http://patchwork.linux-mips.org/patch/4898/
|
|||
create mode 100644 arch/mips/ralink/dts/rt3050.dtsi
|
||||
create mode 100644 arch/mips/ralink/dts/rt3052_eval.dts
|
||||
|
||||
diff --git a/arch/mips/ralink/dts/rt3050.dtsi b/arch/mips/ralink/dts/rt3050.dtsi
|
||||
new file mode 100644
|
||||
index 0000000..fd49daa
|
||||
--- /dev/null
|
||||
+++ b/arch/mips/ralink/dts/rt3050.dtsi
|
||||
@@ -0,0 +1,96 @@
|
||||
|
|
@ -114,6 +117,9 @@ Patchwork: http://patchwork.linux-mips.org/patch/4898/
|
|||
+ };
|
||||
+ };
|
||||
+};
|
||||
diff --git a/arch/mips/ralink/dts/rt3052_eval.dts b/arch/mips/ralink/dts/rt3052_eval.dts
|
||||
new file mode 100644
|
||||
index 0000000..dc56e58
|
||||
--- /dev/null
|
||||
+++ b/arch/mips/ralink/dts/rt3052_eval.dts
|
||||
@@ -0,0 +1,52 @@
|
||||
|
|
@ -169,3 +175,6 @@ Patchwork: http://patchwork.linux-mips.org/patch/4898/
|
|||
+ };
|
||||
+ };
|
||||
+};
|
||||
--
|
||||
1.7.10.4
|
||||
|
||||
|
|
|
|||
|
|
@ -1,7 +1,7 @@
|
|||
From ae2b5bb6570481b50a7175c64176b82da0a81836 Mon Sep 17 00:00:00 2001
|
||||
From 79e69b7a01246e945448039f7dce170eef0b6e3b Mon Sep 17 00:00:00 2001
|
||||
From: John Crispin <blogic@openwrt.org>
|
||||
Date: Sun, 20 Jan 2013 22:05:30 +0100
|
||||
Subject: [PATCH 10/14] MIPS: ralink: adds Kbuild files
|
||||
Subject: [PATCH 10/79] MIPS: ralink: adds Kbuild files
|
||||
|
||||
Add the Kbuild symbols and Makefiles needed to actually build the ralink code
|
||||
from this series
|
||||
|
|
@ -22,6 +22,8 @@ Patchwork: http://patchwork.linux-mips.org/patch/4899/
|
|||
create mode 100644 arch/mips/ralink/Platform
|
||||
create mode 100644 arch/mips/ralink/dts/Makefile
|
||||
|
||||
diff --git a/arch/mips/Kbuild.platforms b/arch/mips/Kbuild.platforms
|
||||
index 91b9d69..9a73ce6 100644
|
||||
--- a/arch/mips/Kbuild.platforms
|
||||
+++ b/arch/mips/Kbuild.platforms
|
||||
@@ -22,6 +22,7 @@ platforms += pmc-sierra
|
||||
|
|
@ -32,6 +34,8 @@ Patchwork: http://patchwork.linux-mips.org/patch/4899/
|
|||
platforms += rb532
|
||||
platforms += sgi-ip22
|
||||
platforms += sgi-ip27
|
||||
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
|
||||
index 2ac626a..b5081b5 100644
|
||||
--- a/arch/mips/Kconfig
|
||||
+++ b/arch/mips/Kconfig
|
||||
@@ -434,6 +434,22 @@ config POWERTV
|
||||
|
|
@ -65,6 +69,9 @@ Patchwork: http://patchwork.linux-mips.org/patch/4899/
|
|||
source "arch/mips/sgi-ip27/Kconfig"
|
||||
source "arch/mips/sibyte/Kconfig"
|
||||
source "arch/mips/txx9/Kconfig"
|
||||
diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
|
||||
new file mode 100644
|
||||
index 0000000..a0b0197
|
||||
--- /dev/null
|
||||
+++ b/arch/mips/ralink/Kconfig
|
||||
@@ -0,0 +1,32 @@
|
||||
|
|
@ -100,6 +107,9 @@ Patchwork: http://patchwork.linux-mips.org/patch/4899/
|
|||
+endchoice
|
||||
+
|
||||
+endif
|
||||
diff --git a/arch/mips/ralink/Makefile b/arch/mips/ralink/Makefile
|
||||
new file mode 100644
|
||||
index 0000000..939757f
|
||||
--- /dev/null
|
||||
+++ b/arch/mips/ralink/Makefile
|
||||
@@ -0,0 +1,15 @@
|
||||
|
|
@ -118,6 +128,9 @@ Patchwork: http://patchwork.linux-mips.org/patch/4899/
|
|||
+obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
|
||||
+
|
||||
+obj-y += dts/
|
||||
diff --git a/arch/mips/ralink/Platform b/arch/mips/ralink/Platform
|
||||
new file mode 100644
|
||||
index 0000000..6babd65
|
||||
--- /dev/null
|
||||
+++ b/arch/mips/ralink/Platform
|
||||
@@ -0,0 +1,10 @@
|
||||
|
|
@ -131,7 +144,13 @@ Patchwork: http://patchwork.linux-mips.org/patch/4899/
|
|||
+# Ralink RT305x
|
||||
+#
|
||||
+load-$(CONFIG_SOC_RT305X) += 0xffffffff80000000
|
||||
diff --git a/arch/mips/ralink/dts/Makefile b/arch/mips/ralink/dts/Makefile
|
||||
new file mode 100644
|
||||
index 0000000..1a69fb3
|
||||
--- /dev/null
|
||||
+++ b/arch/mips/ralink/dts/Makefile
|
||||
@@ -0,0 +1 @@
|
||||
+obj-$(CONFIG_DTB_RT305X_EVAL) := rt3052_eval.dtb.o
|
||||
--
|
||||
1.7.10.4
|
||||
|
||||
|
|
|
|||
|
|
@ -1,7 +1,7 @@
|
|||
From 6d63d70f9fe4c1b3d293ac3b9d2fcaf937d95cea Mon Sep 17 00:00:00 2001
|
||||
From 428bb7af86ffb6171e11c36dfcdacd87ed5341e6 Mon Sep 17 00:00:00 2001
|
||||
From: John Crispin <blogic@openwrt.org>
|
||||
Date: Fri, 1 Feb 2013 12:50:49 +0100
|
||||
Subject: [PATCH 11/14] MIPS: ralink: adds default config file
|
||||
Subject: [PATCH 11/79] MIPS: ralink: adds default config file
|
||||
|
||||
Signed-off-by: John Crispin <blogic@openwrt.org>
|
||||
---
|
||||
|
|
@ -9,6 +9,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
|
|||
1 file changed, 167 insertions(+)
|
||||
create mode 100644 arch/mips/configs/rt305x_defconfig
|
||||
|
||||
diff --git a/arch/mips/configs/rt305x_defconfig b/arch/mips/configs/rt305x_defconfig
|
||||
new file mode 100644
|
||||
index 0000000..d1741bc
|
||||
--- /dev/null
|
||||
+++ b/arch/mips/configs/rt305x_defconfig
|
||||
@@ -0,0 +1,167 @@
|
||||
|
|
@ -179,3 +182,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
|
|||
+# CONFIG_XZ_DEC_ARMTHUMB is not set
|
||||
+# CONFIG_XZ_DEC_SPARC is not set
|
||||
+CONFIG_AVERAGE=y
|
||||
--
|
||||
1.7.10.4
|
||||
|
||||
|
|
|
|||
|
|
@ -1,7 +1,7 @@
|
|||
From dcc7310e144c3bf17a86d2f058d60fb525d4b34a Mon Sep 17 00:00:00 2001
|
||||
From dae867771332e7541783ebb6bacf33356ad449b3 Mon Sep 17 00:00:00 2001
|
||||
From: John Crispin <blogic@openwrt.org>
|
||||
Date: Thu, 31 Jan 2013 13:44:10 +0100
|
||||
Subject: [PATCH 12/14] Document: devicetree: add OF documents for MIPS
|
||||
Subject: [PATCH 12/79] Document: devicetree: add OF documents for MIPS
|
||||
interrupt controller
|
||||
|
||||
Signed-off-by: John Crispin <blogic@openwrt.org>
|
||||
|
|
@ -12,6 +12,9 @@ Patchwork: http://patchwork.linux-mips.org/patch/4901/
|
|||
1 file changed, 47 insertions(+)
|
||||
create mode 100644 Documentation/devicetree/bindings/mips/cpu_irq.txt
|
||||
|
||||
diff --git a/Documentation/devicetree/bindings/mips/cpu_irq.txt b/Documentation/devicetree/bindings/mips/cpu_irq.txt
|
||||
new file mode 100644
|
||||
index 0000000..13aa4b6
|
||||
--- /dev/null
|
||||
+++ b/Documentation/devicetree/bindings/mips/cpu_irq.txt
|
||||
@@ -0,0 +1,47 @@
|
||||
|
|
@ -62,3 +65,6 @@ Patchwork: http://patchwork.linux-mips.org/patch/4901/
|
|||
+{
|
||||
+ of_irq_init(of_irq_ids);
|
||||
+}
|
||||
--
|
||||
1.7.10.4
|
||||
|
||||
|
|
|
|||
|
|
@ -1,7 +1,7 @@
|
|||
From 0916b46962cbcac9465d253d0a398435b3965fd5 Mon Sep 17 00:00:00 2001
|
||||
From 65e39f763eeca6fb93f48ed5a9b296277a543429 Mon Sep 17 00:00:00 2001
|
||||
From: Gabor Juhos <juhosg@openwrt.org>
|
||||
Date: Thu, 31 Jan 2013 12:20:43 +0000
|
||||
Subject: [PATCH 13/14] MIPS: add irqdomain support for the CPU IRQ controller
|
||||
Subject: [PATCH 13/79] MIPS: add irqdomain support for the CPU IRQ controller
|
||||
|
||||
Add code to load a irq_domain for the MIPS IRQ controller from a devicetree
|
||||
file.
|
||||
|
|
@ -15,6 +15,8 @@ Patchwork: http://patchwork.linux-mips.org/patch/4902/
|
|||
arch/mips/kernel/irq_cpu.c | 42 +++++++++++++++++++++++++++++++++++++++
|
||||
2 files changed, 48 insertions(+)
|
||||
|
||||
diff --git a/arch/mips/include/asm/irq_cpu.h b/arch/mips/include/asm/irq_cpu.h
|
||||
index ef6a07c..3f11fdb 100644
|
||||
--- a/arch/mips/include/asm/irq_cpu.h
|
||||
+++ b/arch/mips/include/asm/irq_cpu.h
|
||||
@@ -17,4 +17,10 @@ extern void mips_cpu_irq_init(void);
|
||||
|
|
@ -28,6 +30,8 @@ Patchwork: http://patchwork.linux-mips.org/patch/4902/
|
|||
+#endif
|
||||
+
|
||||
#endif /* _ASM_IRQ_CPU_H */
|
||||
diff --git a/arch/mips/kernel/irq_cpu.c b/arch/mips/kernel/irq_cpu.c
|
||||
index 972263b..49bc9ca 100644
|
||||
--- a/arch/mips/kernel/irq_cpu.c
|
||||
+++ b/arch/mips/kernel/irq_cpu.c
|
||||
@@ -31,6 +31,7 @@
|
||||
|
|
@ -83,3 +87,6 @@ Patchwork: http://patchwork.linux-mips.org/patch/4902/
|
|||
+ return 0;
|
||||
+}
|
||||
+#endif /* CONFIG_IRQ_DOMAIN */
|
||||
--
|
||||
1.7.10.4
|
||||
|
||||
|
|
|
|||
|
|
@ -1,7 +1,7 @@
|
|||
From d3d2b4200b5a42851365e903d101f8f0882eb9eb Mon Sep 17 00:00:00 2001
|
||||
From 9afd2ba44145009578d9d445183480a698cc04f2 Mon Sep 17 00:00:00 2001
|
||||
From: Gabor Juhos <juhosg@openwrt.org>
|
||||
Date: Thu, 31 Jan 2013 20:43:30 +0100
|
||||
Subject: [PATCH 14/14] MIPS: ralink: add CPU interrupt controller to
|
||||
Subject: [PATCH 14/79] MIPS: ralink: add CPU interrupt controller to
|
||||
of_irq_ids
|
||||
|
||||
Convert the ralink IRQ code to make use of the new MIPS IRQ controller OF
|
||||
|
|
@ -16,6 +16,8 @@ Patchwork: http://patchwork.linux-mips.org/patch/4900/
|
|||
arch/mips/ralink/irq.c | 10 +++++++---
|
||||
2 files changed, 17 insertions(+), 3 deletions(-)
|
||||
|
||||
diff --git a/arch/mips/ralink/dts/rt3050.dtsi b/arch/mips/ralink/dts/rt3050.dtsi
|
||||
index fd49daa..069d066 100644
|
||||
--- a/arch/mips/ralink/dts/rt3050.dtsi
|
||||
+++ b/arch/mips/ralink/dts/rt3050.dtsi
|
||||
@@ -13,6 +13,13 @@
|
||||
|
|
@ -42,9 +44,11 @@ Patchwork: http://patchwork.linux-mips.org/patch/4900/
|
|||
};
|
||||
|
||||
memc@300 {
|
||||
diff --git a/arch/mips/ralink/irq.c b/arch/mips/ralink/irq.c
|
||||
index e62c975..6d054c5 100644
|
||||
--- a/arch/mips/ralink/irq.c
|
||||
+++ b/arch/mips/ralink/irq.c
|
||||
@@ -128,8 +128,11 @@ static int __init intc_of_init(struct de
|
||||
@@ -128,8 +128,11 @@ static int __init intc_of_init(struct device_node *node,
|
||||
{
|
||||
struct resource res;
|
||||
struct irq_domain *domain;
|
||||
|
|
@ -57,7 +61,7 @@ Patchwork: http://patchwork.linux-mips.org/patch/4900/
|
|||
|
||||
if (of_address_to_resource(node, 0, &res))
|
||||
panic("Failed to get intc memory range");
|
||||
@@ -156,8 +159,8 @@ static int __init intc_of_init(struct de
|
||||
@@ -156,8 +159,8 @@ static int __init intc_of_init(struct device_node *node,
|
||||
|
||||
rt_intc_w32(INTC_INT_GLOBAL, INTC_REG_ENABLE);
|
||||
|
||||
|
|
@ -68,7 +72,7 @@ Patchwork: http://patchwork.linux-mips.org/patch/4900/
|
|||
|
||||
cp0_perfcount_irq = irq_create_mapping(domain, 9);
|
||||
|
||||
@@ -165,6 +168,7 @@ static int __init intc_of_init(struct de
|
||||
@@ -165,6 +168,7 @@ static int __init intc_of_init(struct device_node *node,
|
||||
}
|
||||
|
||||
static struct of_device_id __initdata of_irq_ids[] = {
|
||||
|
|
@ -76,3 +80,6 @@ Patchwork: http://patchwork.linux-mips.org/patch/4900/
|
|||
{ .compatible = "ralink,rt2880-intc", .data = intc_of_init },
|
||||
{},
|
||||
};
|
||||
--
|
||||
1.7.10.4
|
||||
|
||||
|
|
|
|||
|
|
@ -1,8 +1,8 @@
|
|||
From c420811f117a59a4a7d4e34b362437b91c7fafa1 Mon Sep 17 00:00:00 2001
|
||||
From 219ec2244c2e9085e6900dc515a24f6655c79827 Mon Sep 17 00:00:00 2001
|
||||
From: John Crispin <blogic@openwrt.org>
|
||||
Date: Fri, 25 Jan 2013 19:39:51 +0100
|
||||
Subject: [PATCH] serial: ralink: adds support for the serial core found on
|
||||
ralink wisoc
|
||||
Subject: [PATCH 15/79] serial: ralink: adds support for the serial core found
|
||||
on ralink wisoc
|
||||
|
||||
The MIPS based Ralink WiSoC platform has 1 or more 8250 compatible serial cores.
|
||||
To make them work we require the same quirks that are used by AU1x00.
|
||||
|
|
@ -15,9 +15,11 @@ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|||
include/linux/serial_core.h | 2 +-
|
||||
3 files changed, 12 insertions(+), 4 deletions(-)
|
||||
|
||||
diff --git a/drivers/tty/serial/8250/8250.c b/drivers/tty/serial/8250/8250.c
|
||||
index f932043..f72eb7d 100644
|
||||
--- a/drivers/tty/serial/8250/8250.c
|
||||
+++ b/drivers/tty/serial/8250/8250.c
|
||||
@@ -345,9 +345,9 @@ static void default_serial_dl_write(stru
|
||||
@@ -324,9 +324,9 @@ static void default_serial_dl_write(struct uart_8250_port *up, int value)
|
||||
serial_out(up, UART_DLM, value >> 8 & 0xff);
|
||||
}
|
||||
|
||||
|
|
@ -29,7 +31,7 @@ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|||
static const u8 au_io_in_map[] = {
|
||||
[UART_RX] = 0,
|
||||
[UART_IER] = 2,
|
||||
@@ -527,7 +527,7 @@ static void set_io_from_upio(struct uart
|
||||
@@ -506,7 +506,7 @@ static void set_io_from_upio(struct uart_port *p)
|
||||
break;
|
||||
#endif
|
||||
|
||||
|
|
@ -38,6 +40,8 @@ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|||
case UPIO_AU:
|
||||
p->serial_in = au_serial_in;
|
||||
p->serial_out = au_serial_out;
|
||||
diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
|
||||
index c31133a..9e4febd 100644
|
||||
--- a/drivers/tty/serial/8250/Kconfig
|
||||
+++ b/drivers/tty/serial/8250/Kconfig
|
||||
@@ -277,3 +277,11 @@ config SERIAL_8250_EM
|
||||
|
|
@ -52,6 +56,8 @@ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|||
+ If you have a Ralink RT288x/RT305x SoC based board and want to use the
|
||||
+ serial port, say Y to this option. The driver can handle up to 2 serial
|
||||
+ ports. If unsure, say N.
|
||||
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
|
||||
index c6690a2..0b428d6 100644
|
||||
--- a/include/linux/serial_core.h
|
||||
+++ b/include/linux/serial_core.h
|
||||
@@ -134,7 +134,7 @@ struct uart_port {
|
||||
|
|
@ -63,3 +69,6 @@ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|||
#define UPIO_TSI (5) /* Tsi108/109 type IO */
|
||||
#define UPIO_RM9000 (6) /* RM9000 type IO */
|
||||
|
||||
--
|
||||
1.7.10.4
|
||||
|
||||
|
|
|
|||
|
|
@ -0,0 +1,167 @@
|
|||
From 231e989ef4a11073ad6be8af797f96d51256d07a Mon Sep 17 00:00:00 2001
|
||||
From: John Crispin <blogic@openwrt.org>
|
||||
Date: Thu, 11 Apr 2013 05:34:59 +0000
|
||||
Subject: [PATCH 16/79] MIPS: move mips_{set,get}_machine_name() to a more
|
||||
generic place
|
||||
|
||||
Previously this functionality was only available to users of the mips_machine
|
||||
api. Moving the code to prom.c allows us to also add a OF wrapper.
|
||||
|
||||
Signed-off-by: John Crispin <blogic@openwrt.org>
|
||||
Patchwork: http://patchwork.linux-mips.org/patch/5164/
|
||||
---
|
||||
arch/mips/include/asm/mips_machine.h | 4 ----
|
||||
arch/mips/include/asm/prom.h | 3 +++
|
||||
arch/mips/kernel/mips_machine.c | 21 ---------------------
|
||||
arch/mips/kernel/proc.c | 2 +-
|
||||
arch/mips/kernel/prom.c | 31 +++++++++++++++++++++++++++++++
|
||||
5 files changed, 35 insertions(+), 26 deletions(-)
|
||||
|
||||
diff --git a/arch/mips/include/asm/mips_machine.h b/arch/mips/include/asm/mips_machine.h
|
||||
index 363bb35..9d00aeb 100644
|
||||
--- a/arch/mips/include/asm/mips_machine.h
|
||||
+++ b/arch/mips/include/asm/mips_machine.h
|
||||
@@ -42,13 +42,9 @@ extern long __mips_machines_end;
|
||||
#ifdef CONFIG_MIPS_MACHINE
|
||||
int mips_machtype_setup(char *id) __init;
|
||||
void mips_machine_setup(void) __init;
|
||||
-void mips_set_machine_name(const char *name) __init;
|
||||
-char *mips_get_machine_name(void);
|
||||
#else
|
||||
static inline int mips_machtype_setup(char *id) { return 1; }
|
||||
static inline void mips_machine_setup(void) { }
|
||||
-static inline void mips_set_machine_name(const char *name) { }
|
||||
-static inline char *mips_get_machine_name(void) { return NULL; }
|
||||
#endif /* CONFIG_MIPS_MACHINE */
|
||||
|
||||
#endif /* __ASM_MIPS_MACHINE_H */
|
||||
diff --git a/arch/mips/include/asm/prom.h b/arch/mips/include/asm/prom.h
|
||||
index 8808bf5..1e7e096 100644
|
||||
--- a/arch/mips/include/asm/prom.h
|
||||
+++ b/arch/mips/include/asm/prom.h
|
||||
@@ -48,4 +48,7 @@ extern void __dt_setup_arch(struct boot_param_header *bph);
|
||||
static inline void device_tree_init(void) { }
|
||||
#endif /* CONFIG_OF */
|
||||
|
||||
+extern char *mips_get_machine_name(void);
|
||||
+extern void mips_set_machine_name(const char *name);
|
||||
+
|
||||
#endif /* __ASM_PROM_H */
|
||||
diff --git a/arch/mips/kernel/mips_machine.c b/arch/mips/kernel/mips_machine.c
|
||||
index 411a058..6dc5866 100644
|
||||
--- a/arch/mips/kernel/mips_machine.c
|
||||
+++ b/arch/mips/kernel/mips_machine.c
|
||||
@@ -13,7 +13,6 @@
|
||||
#include <asm/mips_machine.h>
|
||||
|
||||
static struct mips_machine *mips_machine __initdata;
|
||||
-static char *mips_machine_name = "Unknown";
|
||||
|
||||
#define for_each_machine(mach) \
|
||||
for ((mach) = (struct mips_machine *)&__mips_machines_start; \
|
||||
@@ -21,25 +20,6 @@ static char *mips_machine_name = "Unknown";
|
||||
(unsigned long)(mach) < (unsigned long)&__mips_machines_end; \
|
||||
(mach)++)
|
||||
|
||||
-__init void mips_set_machine_name(const char *name)
|
||||
-{
|
||||
- char *p;
|
||||
-
|
||||
- if (name == NULL)
|
||||
- return;
|
||||
-
|
||||
- p = kstrdup(name, GFP_KERNEL);
|
||||
- if (!p)
|
||||
- pr_err("MIPS: no memory for machine_name\n");
|
||||
-
|
||||
- mips_machine_name = p;
|
||||
-}
|
||||
-
|
||||
-char *mips_get_machine_name(void)
|
||||
-{
|
||||
- return mips_machine_name;
|
||||
-}
|
||||
-
|
||||
__init int mips_machtype_setup(char *id)
|
||||
{
|
||||
struct mips_machine *mach;
|
||||
@@ -79,7 +59,6 @@ __init void mips_machine_setup(void)
|
||||
return;
|
||||
|
||||
mips_set_machine_name(mips_machine->mach_name);
|
||||
- pr_info("MIPS: machine is %s\n", mips_machine_name);
|
||||
|
||||
if (mips_machine->mach_setup)
|
||||
mips_machine->mach_setup();
|
||||
diff --git a/arch/mips/kernel/proc.c b/arch/mips/kernel/proc.c
|
||||
index 07dff54..8779237 100644
|
||||
--- a/arch/mips/kernel/proc.c
|
||||
+++ b/arch/mips/kernel/proc.c
|
||||
@@ -12,7 +12,7 @@
|
||||
#include <asm/cpu-features.h>
|
||||
#include <asm/mipsregs.h>
|
||||
#include <asm/processor.h>
|
||||
-#include <asm/mips_machine.h>
|
||||
+#include <asm/prom.h>
|
||||
|
||||
unsigned int vced_count, vcei_count;
|
||||
|
||||
diff --git a/arch/mips/kernel/prom.c b/arch/mips/kernel/prom.c
|
||||
index 028f6f8..b68e53b 100644
|
||||
--- a/arch/mips/kernel/prom.c
|
||||
+++ b/arch/mips/kernel/prom.c
|
||||
@@ -23,6 +23,22 @@
|
||||
#include <asm/page.h>
|
||||
#include <asm/prom.h>
|
||||
|
||||
+static char mips_machine_name[64] = "Unknown";
|
||||
+
|
||||
+__init void mips_set_machine_name(const char *name)
|
||||
+{
|
||||
+ if (name == NULL)
|
||||
+ return;
|
||||
+
|
||||
+ strncpy(mips_machine_name, name, sizeof(mips_machine_name));
|
||||
+ pr_info("MIPS: machine is %s\n", mips_get_machine_name());
|
||||
+}
|
||||
+
|
||||
+char *mips_get_machine_name(void)
|
||||
+{
|
||||
+ return mips_machine_name;
|
||||
+}
|
||||
+
|
||||
int __init early_init_dt_scan_memory_arch(unsigned long node,
|
||||
const char *uname, int depth,
|
||||
void *data)
|
||||
@@ -50,6 +66,18 @@ void __init early_init_dt_setup_initrd_arch(unsigned long start,
|
||||
}
|
||||
#endif
|
||||
|
||||
+int __init early_init_dt_scan_model(unsigned long node, const char *uname,
|
||||
+ int depth, void *data)
|
||||
+{
|
||||
+ if (!depth) {
|
||||
+ char *model = of_get_flat_dt_prop(node, "model", NULL);
|
||||
+
|
||||
+ if (model)
|
||||
+ mips_set_machine_name(model);
|
||||
+ }
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
void __init early_init_devtree(void *params)
|
||||
{
|
||||
/* Setup flat device-tree pointer */
|
||||
@@ -65,6 +93,9 @@ void __init early_init_devtree(void *params)
|
||||
/* Scan memory nodes */
|
||||
of_scan_flat_dt(early_init_dt_scan_root, NULL);
|
||||
of_scan_flat_dt(early_init_dt_scan_memory_arch, NULL);
|
||||
+
|
||||
+ /* try to load the mips machine name */
|
||||
+ of_scan_flat_dt(early_init_dt_scan_model, NULL);
|
||||
}
|
||||
|
||||
void __init __dt_setup_arch(struct boot_param_header *bph)
|
||||
--
|
||||
1.7.10.4
|
||||
|
||||
|
|
@ -1,7 +1,7 @@
|
|||
From 16d9eaf22f30ed0b0deddfe8e11426889ccdb556 Mon Sep 17 00:00:00 2001
|
||||
From 98ab228172e66e43766d9e2a0ddb73603c22dbd1 Mon Sep 17 00:00:00 2001
|
||||
From: Gabor Juhos <juhosg@openwrt.org>
|
||||
Date: Wed, 10 Apr 2013 09:07:27 +0200
|
||||
Subject: [PATCH 101/137] MIPS: ralink: add PCI IRQ handling
|
||||
Subject: [PATCH 17/79] MIPS: ralink: add PCI IRQ handling
|
||||
|
||||
The Ralink IRQ code was not handling the PCI IRQ yet. Add this functionaility
|
||||
to make PCI work on rt3883.
|
||||
|
|
@ -13,6 +13,8 @@ Patchwork: http://patchwork.linux-mips.org/patch/5165/
|
|||
arch/mips/ralink/irq.c | 4 ++++
|
||||
1 file changed, 4 insertions(+)
|
||||
|
||||
diff --git a/arch/mips/ralink/irq.c b/arch/mips/ralink/irq.c
|
||||
index 6d054c5..d9807d0 100644
|
||||
--- a/arch/mips/ralink/irq.c
|
||||
+++ b/arch/mips/ralink/irq.c
|
||||
@@ -31,6 +31,7 @@
|
||||
|
|
@ -33,3 +35,6 @@ Patchwork: http://patchwork.linux-mips.org/patch/5165/
|
|||
else if (pending & STATUSF_IP2)
|
||||
do_IRQ(RALINK_CPU_IRQ_INTC);
|
||||
|
||||
--
|
||||
1.7.10.4
|
||||
|
||||
|
|
@ -0,0 +1,40 @@
|
|||
From 8667d984d1b4f3be1c5da71788762b9945a25c90 Mon Sep 17 00:00:00 2001
|
||||
From: John Crispin <blogic@openwrt.org>
|
||||
Date: Thu, 21 Mar 2013 19:01:49 +0100
|
||||
Subject: [PATCH 18/79] MIPS: ralink: add RT3352 register defines
|
||||
|
||||
Add a few missing defines that are needed to make USB and clock detection work
|
||||
on the RT3352.
|
||||
|
||||
Signed-off-by: John Crispin <blogic@openwrt.org>
|
||||
Acked-by: Gabor Juhos <juhosg@openwrt.org>
|
||||
Patchwork: http://patchwork.linux-mips.org/patch/5166/
|
||||
---
|
||||
arch/mips/include/asm/mach-ralink/rt305x.h | 13 +++++++++++++
|
||||
1 file changed, 13 insertions(+)
|
||||
|
||||
diff --git a/arch/mips/include/asm/mach-ralink/rt305x.h b/arch/mips/include/asm/mach-ralink/rt305x.h
|
||||
index 7d344f2..e36c3c5 100644
|
||||
--- a/arch/mips/include/asm/mach-ralink/rt305x.h
|
||||
+++ b/arch/mips/include/asm/mach-ralink/rt305x.h
|
||||
@@ -136,4 +136,17 @@ static inline int soc_is_rt5350(void)
|
||||
#define RT305X_GPIO_MODE_SDRAM BIT(8)
|
||||
#define RT305X_GPIO_MODE_RGMII BIT(9)
|
||||
|
||||
+#define RT3352_SYSC_REG_SYSCFG0 0x010
|
||||
+#define RT3352_SYSC_REG_SYSCFG1 0x014
|
||||
+#define RT3352_SYSC_REG_CLKCFG1 0x030
|
||||
+#define RT3352_SYSC_REG_RSTCTRL 0x034
|
||||
+#define RT3352_SYSC_REG_USB_PS 0x05c
|
||||
+
|
||||
+#define RT3352_CLKCFG0_XTAL_SEL BIT(20)
|
||||
+#define RT3352_CLKCFG1_UPHY0_CLK_EN BIT(18)
|
||||
+#define RT3352_CLKCFG1_UPHY1_CLK_EN BIT(20)
|
||||
+#define RT3352_RSTCTRL_UHST BIT(22)
|
||||
+#define RT3352_RSTCTRL_UDEV BIT(25)
|
||||
+#define RT3352_SYSCFG1_USB0_HOST_MODE BIT(10)
|
||||
+
|
||||
#endif
|
||||
--
|
||||
1.7.10.4
|
||||
|
||||
|
|
@ -1,7 +1,7 @@
|
|||
From 845f786c561c0991d9b4088a2d77b8fd4831d487 Mon Sep 17 00:00:00 2001
|
||||
From 853823a469a8123657bf32bc5e1843c40529a20d Mon Sep 17 00:00:00 2001
|
||||
From: John Crispin <blogic@openwrt.org>
|
||||
Date: Fri, 22 Mar 2013 19:25:59 +0100
|
||||
Subject: [PATCH 103/137] MIPS: ralink: fix RT305x clock setup
|
||||
Subject: [PATCH 19/79] MIPS: ralink: fix RT305x clock setup
|
||||
|
||||
Add a few missing clocks.
|
||||
|
||||
|
|
@ -12,6 +12,8 @@ Patchwork: http://patchwork.linux-mips.org/patch/5167/
|
|||
arch/mips/ralink/rt305x.c | 12 ++++++++++++
|
||||
1 file changed, 12 insertions(+)
|
||||
|
||||
diff --git a/arch/mips/ralink/rt305x.c b/arch/mips/ralink/rt305x.c
|
||||
index 0a4bbdc..5d49a54 100644
|
||||
--- a/arch/mips/ralink/rt305x.c
|
||||
+++ b/arch/mips/ralink/rt305x.c
|
||||
@@ -124,6 +124,8 @@ struct ralink_pinmux gpio_pinmux = {
|
||||
|
|
@ -45,3 +47,6 @@ Patchwork: http://patchwork.linux-mips.org/patch/5167/
|
|||
}
|
||||
|
||||
void __init ralink_of_remap(void)
|
||||
--
|
||||
1.7.10.4
|
||||
|
||||
|
|
@ -0,0 +1,29 @@
|
|||
From 7c268f1b47669be2efce1607ee02193cb49424cf Mon Sep 17 00:00:00 2001
|
||||
From: John Crispin <blogic@openwrt.org>
|
||||
Date: Sat, 16 Mar 2013 16:28:54 +0100
|
||||
Subject: [PATCH 20/79] MIPS: ralink: add missing comment in irq driver
|
||||
|
||||
Trivial patch that adds a comment that makes the code more readable.
|
||||
|
||||
Signed-off-by: John Crispin <blogic@openwrt.org>
|
||||
Acked-by: Gabor Juhos <juhosg@openwrt.org>
|
||||
Patchwork: http://patchwork.linux-mips.org/patch/5168/
|
||||
---
|
||||
arch/mips/ralink/irq.c | 1 +
|
||||
1 file changed, 1 insertion(+)
|
||||
|
||||
diff --git a/arch/mips/ralink/irq.c b/arch/mips/ralink/irq.c
|
||||
index d9807d0..320b1f1 100644
|
||||
--- a/arch/mips/ralink/irq.c
|
||||
+++ b/arch/mips/ralink/irq.c
|
||||
@@ -166,6 +166,7 @@ static int __init intc_of_init(struct device_node *node,
|
||||
irq_set_chained_handler(irq, ralink_intc_irq_handler);
|
||||
irq_set_handler_data(irq, domain);
|
||||
|
||||
+ /* tell the kernel which irq is used for performance monitoring */
|
||||
cp0_perfcount_irq = irq_create_mapping(domain, 9);
|
||||
|
||||
return 0;
|
||||
--
|
||||
1.7.10.4
|
||||
|
||||
|
|
@ -0,0 +1,37 @@
|
|||
From 0df8c2fdd0fe1095b834fbf2b098d6f1b3e56608 Mon Sep 17 00:00:00 2001
|
||||
From: John Crispin <blogic@openwrt.org>
|
||||
Date: Mon, 25 Mar 2013 11:19:58 +0100
|
||||
Subject: [PATCH 21/79] MIPS: ralink: add RT5350 sdram register defines
|
||||
|
||||
Add a few missing defines that are needed to make memory detection work on the
|
||||
RT5350.
|
||||
|
||||
Signed-off-by: John Crispin <blogic@openwrt.org>
|
||||
Acked-by: Gabor Juhos <juhosg@openwrt.org>
|
||||
Patchwork: http://patchwork.linux-mips.org/patch/5169/
|
||||
---
|
||||
arch/mips/include/asm/mach-ralink/rt305x.h | 8 ++++++++
|
||||
1 file changed, 8 insertions(+)
|
||||
|
||||
diff --git a/arch/mips/include/asm/mach-ralink/rt305x.h b/arch/mips/include/asm/mach-ralink/rt305x.h
|
||||
index e36c3c5..80cda8a 100644
|
||||
--- a/arch/mips/include/asm/mach-ralink/rt305x.h
|
||||
+++ b/arch/mips/include/asm/mach-ralink/rt305x.h
|
||||
@@ -97,6 +97,14 @@ static inline int soc_is_rt5350(void)
|
||||
#define RT5350_SYSCFG0_CPUCLK_320 0x2
|
||||
#define RT5350_SYSCFG0_CPUCLK_300 0x3
|
||||
|
||||
+#define RT5350_SYSCFG0_DRAM_SIZE_SHIFT 12
|
||||
+#define RT5350_SYSCFG0_DRAM_SIZE_MASK 7
|
||||
+#define RT5350_SYSCFG0_DRAM_SIZE_2M 0
|
||||
+#define RT5350_SYSCFG0_DRAM_SIZE_8M 1
|
||||
+#define RT5350_SYSCFG0_DRAM_SIZE_16M 2
|
||||
+#define RT5350_SYSCFG0_DRAM_SIZE_32M 3
|
||||
+#define RT5350_SYSCFG0_DRAM_SIZE_64M 4
|
||||
+
|
||||
/* multi function gpio pins */
|
||||
#define RT305X_GPIO_I2C_SD 1
|
||||
#define RT305X_GPIO_I2C_SCLK 2
|
||||
--
|
||||
1.7.10.4
|
||||
|
||||
|
|
@ -0,0 +1,33 @@
|
|||
From 9ed190912864c8b96d888af2cb66efcf1dc5562a Mon Sep 17 00:00:00 2001
|
||||
From: John Crispin <blogic@openwrt.org>
|
||||
Date: Tue, 9 Apr 2013 18:31:15 +0200
|
||||
Subject: [PATCH 22/79] MIPS: ralink: make early_printk work on RT2880
|
||||
|
||||
RT2880 has a different location for the early serial port.
|
||||
|
||||
Signed-off-by: John Crispin <blogic@openwrt.org>
|
||||
Acked-by: Gabor Juhos <juhosg@openwrt.org>
|
||||
Patchwork: http://patchwork.linux-mips.org/patch/5170/
|
||||
---
|
||||
arch/mips/ralink/early_printk.c | 4 ++++
|
||||
1 file changed, 4 insertions(+)
|
||||
|
||||
diff --git a/arch/mips/ralink/early_printk.c b/arch/mips/ralink/early_printk.c
|
||||
index c4ae47e..b46d041 100644
|
||||
--- a/arch/mips/ralink/early_printk.c
|
||||
+++ b/arch/mips/ralink/early_printk.c
|
||||
@@ -11,7 +11,11 @@
|
||||
|
||||
#include <asm/addrspace.h>
|
||||
|
||||
+#ifdef CONFIG_SOC_RT288X
|
||||
+#define EARLY_UART_BASE 0x300c00
|
||||
+#else
|
||||
#define EARLY_UART_BASE 0x10000c00
|
||||
+#endif
|
||||
|
||||
#define UART_REG_RX 0x00
|
||||
#define UART_REG_TX 0x04
|
||||
--
|
||||
1.7.10.4
|
||||
|
||||
|
|
@ -0,0 +1,43 @@
|
|||
From d5b75031f6ad0f9f82c3b8faeab3cda1cb4ebfe9 Mon Sep 17 00:00:00 2001
|
||||
From: John Crispin <blogic@openwrt.org>
|
||||
Date: Fri, 12 Apr 2013 22:12:09 +0200
|
||||
Subject: [PATCH 23/79] MIPS: ralink: rename gpio_pinmux to rt_gpio_pinmux
|
||||
|
||||
Add proper namespacing to the variable.
|
||||
|
||||
Signed-off-by: John Crispin <blogic@openwrt.org>
|
||||
Patchwork: http://patchwork.linux-mips.org/patch/5171/
|
||||
---
|
||||
arch/mips/ralink/common.h | 2 +-
|
||||
arch/mips/ralink/rt305x.c | 2 +-
|
||||
2 files changed, 2 insertions(+), 2 deletions(-)
|
||||
|
||||
diff --git a/arch/mips/ralink/common.h b/arch/mips/ralink/common.h
|
||||
index 3009903..f4b19c6 100644
|
||||
--- a/arch/mips/ralink/common.h
|
||||
+++ b/arch/mips/ralink/common.h
|
||||
@@ -24,7 +24,7 @@ struct ralink_pinmux {
|
||||
int uart_shift;
|
||||
void (*wdt_reset)(void);
|
||||
};
|
||||
-extern struct ralink_pinmux gpio_pinmux;
|
||||
+extern struct ralink_pinmux rt_gpio_pinmux;
|
||||
|
||||
struct ralink_soc_info {
|
||||
unsigned char sys_type[RAMIPS_SYS_TYPE_LEN];
|
||||
diff --git a/arch/mips/ralink/rt305x.c b/arch/mips/ralink/rt305x.c
|
||||
index 5d49a54..f1a6c33 100644
|
||||
--- a/arch/mips/ralink/rt305x.c
|
||||
+++ b/arch/mips/ralink/rt305x.c
|
||||
@@ -114,7 +114,7 @@ void rt305x_wdt_reset(void)
|
||||
rt_sysc_w32(t, SYSC_REG_SYSTEM_CONFIG);
|
||||
}
|
||||
|
||||
-struct ralink_pinmux gpio_pinmux = {
|
||||
+struct ralink_pinmux rt_gpio_pinmux = {
|
||||
.mode = mode_mux,
|
||||
.uart = uart_mux,
|
||||
.uart_shift = RT305X_GPIO_MODE_UART0_SHIFT,
|
||||
--
|
||||
1.7.10.4
|
||||
|
||||
|
|
@ -0,0 +1,49 @@
|
|||
From 2793deaf4d3d364ba2ed075abf2b9022a152f253 Mon Sep 17 00:00:00 2001
|
||||
From: John Crispin <blogic@openwrt.org>
|
||||
Date: Fri, 12 Apr 2013 22:16:12 +0200
|
||||
Subject: [PATCH 24/79] MIPS: ralink: make the RT305x pinmuxing structure
|
||||
static
|
||||
|
||||
These structures are exported via struct ralink_pinmux rt_gpio_pinmux and can
|
||||
hence be static.
|
||||
|
||||
Signed-off-by: John Crispin <blogic@openwrt.org>
|
||||
Patchwork: http://patchwork.linux-mips.org/patch/5172/
|
||||
---
|
||||
arch/mips/ralink/rt305x.c | 6 +++---
|
||||
1 file changed, 3 insertions(+), 3 deletions(-)
|
||||
|
||||
diff --git a/arch/mips/ralink/rt305x.c b/arch/mips/ralink/rt305x.c
|
||||
index f1a6c33..5b42078 100644
|
||||
--- a/arch/mips/ralink/rt305x.c
|
||||
+++ b/arch/mips/ralink/rt305x.c
|
||||
@@ -22,7 +22,7 @@
|
||||
|
||||
enum rt305x_soc_type rt305x_soc;
|
||||
|
||||
-struct ralink_pinmux_grp mode_mux[] = {
|
||||
+static struct ralink_pinmux_grp mode_mux[] = {
|
||||
{
|
||||
.name = "i2c",
|
||||
.mask = RT305X_GPIO_MODE_I2C,
|
||||
@@ -61,7 +61,7 @@ struct ralink_pinmux_grp mode_mux[] = {
|
||||
}, {0}
|
||||
};
|
||||
|
||||
-struct ralink_pinmux_grp uart_mux[] = {
|
||||
+static struct ralink_pinmux_grp uart_mux[] = {
|
||||
{
|
||||
.name = "uartf",
|
||||
.mask = RT305X_GPIO_MODE_UARTF,
|
||||
@@ -103,7 +103,7 @@ struct ralink_pinmux_grp uart_mux[] = {
|
||||
}, {0}
|
||||
};
|
||||
|
||||
-void rt305x_wdt_reset(void)
|
||||
+static void rt305x_wdt_reset(void)
|
||||
{
|
||||
u32 t;
|
||||
|
||||
--
|
||||
1.7.10.4
|
||||
|
||||
|
|
@ -0,0 +1,31 @@
|
|||
From e859bf709e73acb5735cf1207422f53fc3202632 Mon Sep 17 00:00:00 2001
|
||||
From: Gabor Juhos <juhosg@openwrt.org>
|
||||
Date: Fri, 12 Apr 2013 12:40:23 +0200
|
||||
Subject: [PATCH 25/79] MIPS: ralink: add pci group to struct ralink_pinmux
|
||||
|
||||
This will be used for RT3662/RT3883.
|
||||
|
||||
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
|
||||
Acked-by: John Crispin <blogic@openwrt.org>
|
||||
Patchwork: http://patchwork.linux-mips.org/patch/5173/
|
||||
---
|
||||
arch/mips/ralink/common.h | 3 +++
|
||||
1 file changed, 3 insertions(+)
|
||||
|
||||
diff --git a/arch/mips/ralink/common.h b/arch/mips/ralink/common.h
|
||||
index f4b19c6..bebd149 100644
|
||||
--- a/arch/mips/ralink/common.h
|
||||
+++ b/arch/mips/ralink/common.h
|
||||
@@ -23,6 +23,9 @@ struct ralink_pinmux {
|
||||
struct ralink_pinmux_grp *uart;
|
||||
int uart_shift;
|
||||
void (*wdt_reset)(void);
|
||||
+ struct ralink_pinmux_grp *pci;
|
||||
+ int pci_shift;
|
||||
+ u32 pci_mask;
|
||||
};
|
||||
extern struct ralink_pinmux rt_gpio_pinmux;
|
||||
|
||||
--
|
||||
1.7.10.4
|
||||
|
||||
|
|
@ -0,0 +1,56 @@
|
|||
From 6e09e0465b342b52ecda583cbc41e6a31c363b3f Mon Sep 17 00:00:00 2001
|
||||
From: John Crispin <blogic@openwrt.org>
|
||||
Date: Fri, 12 Apr 2013 12:45:27 +0200
|
||||
Subject: [PATCH 26/79] MIPS: ralink: add uart mask to struct ralink_pinmux
|
||||
|
||||
Add a field for the uart muxing mask and set it inside the rt305x setup code.
|
||||
|
||||
Signed-off-by: John Crispin <blogic@openwrt.org>
|
||||
Patchwork: http://patchwork.linux-mips.org/patch/5744/
|
||||
---
|
||||
arch/mips/ralink/common.h | 1 +
|
||||
arch/mips/ralink/rt305x.c | 5 +++--
|
||||
2 files changed, 4 insertions(+), 2 deletions(-)
|
||||
|
||||
diff --git a/arch/mips/ralink/common.h b/arch/mips/ralink/common.h
|
||||
index bebd149..299119b 100644
|
||||
--- a/arch/mips/ralink/common.h
|
||||
+++ b/arch/mips/ralink/common.h
|
||||
@@ -22,6 +22,7 @@ struct ralink_pinmux {
|
||||
struct ralink_pinmux_grp *mode;
|
||||
struct ralink_pinmux_grp *uart;
|
||||
int uart_shift;
|
||||
+ u32 uart_mask;
|
||||
void (*wdt_reset)(void);
|
||||
struct ralink_pinmux_grp *pci;
|
||||
int pci_shift;
|
||||
diff --git a/arch/mips/ralink/rt305x.c b/arch/mips/ralink/rt305x.c
|
||||
index 5b42078..6aa3cb1 100644
|
||||
--- a/arch/mips/ralink/rt305x.c
|
||||
+++ b/arch/mips/ralink/rt305x.c
|
||||
@@ -91,12 +91,12 @@ static struct ralink_pinmux_grp uart_mux[] = {
|
||||
.name = "gpio uartf",
|
||||
.mask = RT305X_GPIO_MODE_GPIO_UARTF,
|
||||
.gpio_first = RT305X_GPIO_7,
|
||||
- .gpio_last = RT305X_GPIO_14,
|
||||
+ .gpio_last = RT305X_GPIO_10,
|
||||
}, {
|
||||
.name = "gpio i2s",
|
||||
.mask = RT305X_GPIO_MODE_GPIO_I2S,
|
||||
.gpio_first = RT305X_GPIO_7,
|
||||
- .gpio_last = RT305X_GPIO_14,
|
||||
+ .gpio_last = RT305X_GPIO_10,
|
||||
}, {
|
||||
.name = "gpio",
|
||||
.mask = RT305X_GPIO_MODE_GPIO,
|
||||
@@ -118,6 +118,7 @@ struct ralink_pinmux rt_gpio_pinmux = {
|
||||
.mode = mode_mux,
|
||||
.uart = uart_mux,
|
||||
.uart_shift = RT305X_GPIO_MODE_UART0_SHIFT,
|
||||
+ .uart_mask = RT305X_GPIO_MODE_UART0_MASK,
|
||||
.wdt_reset = rt305x_wdt_reset,
|
||||
};
|
||||
|
||||
--
|
||||
1.7.10.4
|
||||
|
||||
|
|
@ -0,0 +1,281 @@
|
|||
From 2a0d9878985bb3274bb61535f76ea293991635a9 Mon Sep 17 00:00:00 2001
|
||||
From: John Crispin <blogic@openwrt.org>
|
||||
Date: Sun, 27 Jan 2013 09:17:20 +0100
|
||||
Subject: [PATCH 27/79] MIPS: ralink: adds support for RT2880 SoC family
|
||||
|
||||
Add support code for rt2880 SOC.
|
||||
|
||||
The code detects the SoC and registers the clk / pinmux settings.
|
||||
|
||||
Signed-off-by: John Crispin <blogic@openwrt.org>
|
||||
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
|
||||
Patchwork: http://patchwork.linux-mips.org/patch/5176/
|
||||
---
|
||||
arch/mips/Kconfig | 2 +-
|
||||
arch/mips/include/asm/mach-ralink/rt288x.h | 49 ++++++++++
|
||||
arch/mips/ralink/Kconfig | 3 +
|
||||
arch/mips/ralink/Makefile | 1 +
|
||||
arch/mips/ralink/Platform | 5 +
|
||||
arch/mips/ralink/rt288x.c | 139 ++++++++++++++++++++++++++++
|
||||
6 files changed, 198 insertions(+), 1 deletion(-)
|
||||
create mode 100644 arch/mips/include/asm/mach-ralink/rt288x.h
|
||||
create mode 100644 arch/mips/ralink/rt288x.c
|
||||
|
||||
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
|
||||
index b5081b5..b5fd476 100644
|
||||
--- a/arch/mips/Kconfig
|
||||
+++ b/arch/mips/Kconfig
|
||||
@@ -1177,7 +1177,7 @@ config BOOT_ELF32
|
||||
|
||||
config MIPS_L1_CACHE_SHIFT
|
||||
int
|
||||
- default "4" if MACH_DECSTATION || MIKROTIK_RB532 || PMC_MSP4200_EVAL
|
||||
+ default "4" if MACH_DECSTATION || MIKROTIK_RB532 || PMC_MSP4200_EVAL || SOC_RT288X
|
||||
default "6" if MIPS_CPU_SCACHE
|
||||
default "7" if SGI_IP22 || SGI_IP27 || SGI_IP28 || SNI_RM || CPU_CAVIUM_OCTEON
|
||||
default "5"
|
||||
diff --git a/arch/mips/include/asm/mach-ralink/rt288x.h b/arch/mips/include/asm/mach-ralink/rt288x.h
|
||||
new file mode 100644
|
||||
index 0000000..ad8b42d
|
||||
--- /dev/null
|
||||
+++ b/arch/mips/include/asm/mach-ralink/rt288x.h
|
||||
@@ -0,0 +1,49 @@
|
||||
+/*
|
||||
+ * This program is free software; you can redistribute it and/or modify it
|
||||
+ * under the terms of the GNU General Public License version 2 as published
|
||||
+ * by the Free Software Foundation.
|
||||
+ *
|
||||
+ * Parts of this file are based on Ralink's 2.6.21 BSP
|
||||
+ *
|
||||
+ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
|
||||
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
|
||||
+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
|
||||
+ */
|
||||
+
|
||||
+#ifndef _RT288X_REGS_H_
|
||||
+#define _RT288X_REGS_H_
|
||||
+
|
||||
+#define RT2880_SYSC_BASE 0x00300000
|
||||
+
|
||||
+#define SYSC_REG_CHIP_NAME0 0x00
|
||||
+#define SYSC_REG_CHIP_NAME1 0x04
|
||||
+#define SYSC_REG_CHIP_ID 0x0c
|
||||
+#define SYSC_REG_SYSTEM_CONFIG 0x10
|
||||
+#define SYSC_REG_CLKCFG 0x30
|
||||
+
|
||||
+#define RT2880_CHIP_NAME0 0x38325452
|
||||
+#define RT2880_CHIP_NAME1 0x20203038
|
||||
+
|
||||
+#define CHIP_ID_ID_MASK 0xff
|
||||
+#define CHIP_ID_ID_SHIFT 8
|
||||
+#define CHIP_ID_REV_MASK 0xff
|
||||
+
|
||||
+#define SYSTEM_CONFIG_CPUCLK_SHIFT 20
|
||||
+#define SYSTEM_CONFIG_CPUCLK_MASK 0x3
|
||||
+#define SYSTEM_CONFIG_CPUCLK_250 0x0
|
||||
+#define SYSTEM_CONFIG_CPUCLK_266 0x1
|
||||
+#define SYSTEM_CONFIG_CPUCLK_280 0x2
|
||||
+#define SYSTEM_CONFIG_CPUCLK_300 0x3
|
||||
+
|
||||
+#define RT2880_GPIO_MODE_I2C BIT(0)
|
||||
+#define RT2880_GPIO_MODE_UART0 BIT(1)
|
||||
+#define RT2880_GPIO_MODE_SPI BIT(2)
|
||||
+#define RT2880_GPIO_MODE_UART1 BIT(3)
|
||||
+#define RT2880_GPIO_MODE_JTAG BIT(4)
|
||||
+#define RT2880_GPIO_MODE_MDIO BIT(5)
|
||||
+#define RT2880_GPIO_MODE_SDRAM BIT(6)
|
||||
+#define RT2880_GPIO_MODE_PCI BIT(7)
|
||||
+
|
||||
+#define CLKCFG_SRAM_CS_N_WDT BIT(9)
|
||||
+
|
||||
+#endif
|
||||
diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
|
||||
index a0b0197..6723b94 100644
|
||||
--- a/arch/mips/ralink/Kconfig
|
||||
+++ b/arch/mips/ralink/Kconfig
|
||||
@@ -6,6 +6,9 @@ choice
|
||||
help
|
||||
Select Ralink MIPS SoC type.
|
||||
|
||||
+ config SOC_RT288X
|
||||
+ bool "RT288x"
|
||||
+
|
||||
config SOC_RT305X
|
||||
bool "RT305x"
|
||||
select USB_ARCH_HAS_HCD
|
||||
diff --git a/arch/mips/ralink/Makefile b/arch/mips/ralink/Makefile
|
||||
index 939757f..6d826f2 100644
|
||||
--- a/arch/mips/ralink/Makefile
|
||||
+++ b/arch/mips/ralink/Makefile
|
||||
@@ -8,6 +8,7 @@
|
||||
|
||||
obj-y := prom.o of.o reset.o clk.o irq.o
|
||||
|
||||
+obj-$(CONFIG_SOC_RT288X) += rt288x.o
|
||||
obj-$(CONFIG_SOC_RT305X) += rt305x.o
|
||||
|
||||
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
|
||||
diff --git a/arch/mips/ralink/Platform b/arch/mips/ralink/Platform
|
||||
index 6babd65..3f49e51 100644
|
||||
--- a/arch/mips/ralink/Platform
|
||||
+++ b/arch/mips/ralink/Platform
|
||||
@@ -5,6 +5,11 @@ core-$(CONFIG_RALINK) += arch/mips/ralink/
|
||||
cflags-$(CONFIG_RALINK) += -I$(srctree)/arch/mips/include/asm/mach-ralink
|
||||
|
||||
#
|
||||
+# Ralink RT288x
|
||||
+#
|
||||
+load-$(CONFIG_SOC_RT288X) += 0xffffffff88000000
|
||||
+
|
||||
+#
|
||||
# Ralink RT305x
|
||||
#
|
||||
load-$(CONFIG_SOC_RT305X) += 0xffffffff80000000
|
||||
diff --git a/arch/mips/ralink/rt288x.c b/arch/mips/ralink/rt288x.c
|
||||
new file mode 100644
|
||||
index 0000000..1e0788e
|
||||
--- /dev/null
|
||||
+++ b/arch/mips/ralink/rt288x.c
|
||||
@@ -0,0 +1,139 @@
|
||||
+/*
|
||||
+ * This program is free software; you can redistribute it and/or modify it
|
||||
+ * under the terms of the GNU General Public License version 2 as published
|
||||
+ * by the Free Software Foundation.
|
||||
+ *
|
||||
+ * Parts of this file are based on Ralink's 2.6.21 BSP
|
||||
+ *
|
||||
+ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
|
||||
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
|
||||
+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
|
||||
+ */
|
||||
+
|
||||
+#include <linux/kernel.h>
|
||||
+#include <linux/init.h>
|
||||
+#include <linux/module.h>
|
||||
+
|
||||
+#include <asm/mipsregs.h>
|
||||
+#include <asm/mach-ralink/ralink_regs.h>
|
||||
+#include <asm/mach-ralink/rt288x.h>
|
||||
+
|
||||
+#include "common.h"
|
||||
+
|
||||
+static struct ralink_pinmux_grp mode_mux[] = {
|
||||
+ {
|
||||
+ .name = "i2c",
|
||||
+ .mask = RT2880_GPIO_MODE_I2C,
|
||||
+ .gpio_first = 1,
|
||||
+ .gpio_last = 2,
|
||||
+ }, {
|
||||
+ .name = "spi",
|
||||
+ .mask = RT2880_GPIO_MODE_SPI,
|
||||
+ .gpio_first = 3,
|
||||
+ .gpio_last = 6,
|
||||
+ }, {
|
||||
+ .name = "uartlite",
|
||||
+ .mask = RT2880_GPIO_MODE_UART0,
|
||||
+ .gpio_first = 7,
|
||||
+ .gpio_last = 14,
|
||||
+ }, {
|
||||
+ .name = "jtag",
|
||||
+ .mask = RT2880_GPIO_MODE_JTAG,
|
||||
+ .gpio_first = 17,
|
||||
+ .gpio_last = 21,
|
||||
+ }, {
|
||||
+ .name = "mdio",
|
||||
+ .mask = RT2880_GPIO_MODE_MDIO,
|
||||
+ .gpio_first = 22,
|
||||
+ .gpio_last = 23,
|
||||
+ }, {
|
||||
+ .name = "sdram",
|
||||
+ .mask = RT2880_GPIO_MODE_SDRAM,
|
||||
+ .gpio_first = 24,
|
||||
+ .gpio_last = 39,
|
||||
+ }, {
|
||||
+ .name = "pci",
|
||||
+ .mask = RT2880_GPIO_MODE_PCI,
|
||||
+ .gpio_first = 40,
|
||||
+ .gpio_last = 71,
|
||||
+ }, {0}
|
||||
+};
|
||||
+
|
||||
+static void rt288x_wdt_reset(void)
|
||||
+{
|
||||
+ u32 t;
|
||||
+
|
||||
+ /* enable WDT reset output on pin SRAM_CS_N */
|
||||
+ t = rt_sysc_r32(SYSC_REG_CLKCFG);
|
||||
+ t |= CLKCFG_SRAM_CS_N_WDT;
|
||||
+ rt_sysc_w32(t, SYSC_REG_CLKCFG);
|
||||
+}
|
||||
+
|
||||
+struct ralink_pinmux rt_gpio_pinmux = {
|
||||
+ .mode = mode_mux,
|
||||
+ .wdt_reset = rt288x_wdt_reset,
|
||||
+};
|
||||
+
|
||||
+void __init ralink_clk_init(void)
|
||||
+{
|
||||
+ unsigned long cpu_rate;
|
||||
+ u32 t = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG);
|
||||
+ t = ((t >> SYSTEM_CONFIG_CPUCLK_SHIFT) & SYSTEM_CONFIG_CPUCLK_MASK);
|
||||
+
|
||||
+ switch (t) {
|
||||
+ case SYSTEM_CONFIG_CPUCLK_250:
|
||||
+ cpu_rate = 250000000;
|
||||
+ break;
|
||||
+ case SYSTEM_CONFIG_CPUCLK_266:
|
||||
+ cpu_rate = 266666667;
|
||||
+ break;
|
||||
+ case SYSTEM_CONFIG_CPUCLK_280:
|
||||
+ cpu_rate = 280000000;
|
||||
+ break;
|
||||
+ case SYSTEM_CONFIG_CPUCLK_300:
|
||||
+ cpu_rate = 300000000;
|
||||
+ break;
|
||||
+ }
|
||||
+
|
||||
+ ralink_clk_add("cpu", cpu_rate);
|
||||
+ ralink_clk_add("300100.timer", cpu_rate / 2);
|
||||
+ ralink_clk_add("300120.watchdog", cpu_rate / 2);
|
||||
+ ralink_clk_add("300500.uart", cpu_rate / 2);
|
||||
+ ralink_clk_add("300c00.uartlite", cpu_rate / 2);
|
||||
+ ralink_clk_add("400000.ethernet", cpu_rate / 2);
|
||||
+}
|
||||
+
|
||||
+void __init ralink_of_remap(void)
|
||||
+{
|
||||
+ rt_sysc_membase = plat_of_remap_node("ralink,rt2880-sysc");
|
||||
+ rt_memc_membase = plat_of_remap_node("ralink,rt2880-memc");
|
||||
+
|
||||
+ if (!rt_sysc_membase || !rt_memc_membase)
|
||||
+ panic("Failed to remap core resources");
|
||||
+}
|
||||
+
|
||||
+void prom_soc_init(struct ralink_soc_info *soc_info)
|
||||
+{
|
||||
+ void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT2880_SYSC_BASE);
|
||||
+ const char *name;
|
||||
+ u32 n0;
|
||||
+ u32 n1;
|
||||
+ u32 id;
|
||||
+
|
||||
+ n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0);
|
||||
+ n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1);
|
||||
+ id = __raw_readl(sysc + SYSC_REG_CHIP_ID);
|
||||
+
|
||||
+ if (n0 == RT2880_CHIP_NAME0 && n1 == RT2880_CHIP_NAME1) {
|
||||
+ soc_info->compatible = "ralink,r2880-soc";
|
||||
+ name = "RT2880";
|
||||
+ } else {
|
||||
+ panic("rt288x: unknown SoC, n0:%08x n1:%08x", n0, n1);
|
||||
+ }
|
||||
+
|
||||
+ snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,
|
||||
+ "Ralink %s id:%u rev:%u",
|
||||
+ name,
|
||||
+ (id >> CHIP_ID_ID_SHIFT) & CHIP_ID_ID_MASK,
|
||||
+ (id & CHIP_ID_REV_MASK));
|
||||
+}
|
||||
--
|
||||
1.7.10.4
|
||||
|
||||
|
|
@ -0,0 +1,567 @@
|
|||
From c75f4a5af758494595fded27efb95732365d10db Mon Sep 17 00:00:00 2001
|
||||
From: John Crispin <blogic@openwrt.org>
|
||||
Date: Sun, 27 Jan 2013 09:39:02 +0100
|
||||
Subject: [PATCH 28/79] MIPS: ralink: adds support for RT3883 SoC family
|
||||
|
||||
Add support code for rt3883 SOC.
|
||||
|
||||
The code detects the SoC and registers the clk / pinmux settings.
|
||||
|
||||
Signed-off-by: John Crispin <blogic@openwrt.org>
|
||||
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
|
||||
Patchwork: http://patchwork.linux-mips.org/patch/5185/
|
||||
---
|
||||
arch/mips/include/asm/mach-ralink/rt3883.h | 247 ++++++++++++++++++++++++++++
|
||||
arch/mips/ralink/Kconfig | 5 +
|
||||
arch/mips/ralink/Makefile | 1 +
|
||||
arch/mips/ralink/Platform | 5 +
|
||||
arch/mips/ralink/rt3883.c | 242 +++++++++++++++++++++++++++
|
||||
5 files changed, 500 insertions(+)
|
||||
create mode 100644 arch/mips/include/asm/mach-ralink/rt3883.h
|
||||
create mode 100644 arch/mips/ralink/rt3883.c
|
||||
|
||||
diff --git a/arch/mips/include/asm/mach-ralink/rt3883.h b/arch/mips/include/asm/mach-ralink/rt3883.h
|
||||
new file mode 100644
|
||||
index 0000000..b91c6c1
|
||||
--- /dev/null
|
||||
+++ b/arch/mips/include/asm/mach-ralink/rt3883.h
|
||||
@@ -0,0 +1,247 @@
|
||||
+/*
|
||||
+ * Ralink RT3662/RT3883 SoC register definitions
|
||||
+ *
|
||||
+ * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
|
||||
+ *
|
||||
+ * This program is free software; you can redistribute it and/or modify it
|
||||
+ * under the terms of the GNU General Public License version 2 as published
|
||||
+ * by the Free Software Foundation.
|
||||
+ */
|
||||
+
|
||||
+#ifndef _RT3883_REGS_H_
|
||||
+#define _RT3883_REGS_H_
|
||||
+
|
||||
+#include <linux/bitops.h>
|
||||
+
|
||||
+#define RT3883_SDRAM_BASE 0x00000000
|
||||
+#define RT3883_SYSC_BASE 0x10000000
|
||||
+#define RT3883_TIMER_BASE 0x10000100
|
||||
+#define RT3883_INTC_BASE 0x10000200
|
||||
+#define RT3883_MEMC_BASE 0x10000300
|
||||
+#define RT3883_UART0_BASE 0x10000500
|
||||
+#define RT3883_PIO_BASE 0x10000600
|
||||
+#define RT3883_FSCC_BASE 0x10000700
|
||||
+#define RT3883_NANDC_BASE 0x10000810
|
||||
+#define RT3883_I2C_BASE 0x10000900
|
||||
+#define RT3883_I2S_BASE 0x10000a00
|
||||
+#define RT3883_SPI_BASE 0x10000b00
|
||||
+#define RT3883_UART1_BASE 0x10000c00
|
||||
+#define RT3883_PCM_BASE 0x10002000
|
||||
+#define RT3883_GDMA_BASE 0x10002800
|
||||
+#define RT3883_CODEC1_BASE 0x10003000
|
||||
+#define RT3883_CODEC2_BASE 0x10003800
|
||||
+#define RT3883_FE_BASE 0x10100000
|
||||
+#define RT3883_ROM_BASE 0x10118000
|
||||
+#define RT3883_USBDEV_BASE 0x10112000
|
||||
+#define RT3883_PCI_BASE 0x10140000
|
||||
+#define RT3883_WLAN_BASE 0x10180000
|
||||
+#define RT3883_USBHOST_BASE 0x101c0000
|
||||
+#define RT3883_BOOT_BASE 0x1c000000
|
||||
+#define RT3883_SRAM_BASE 0x1e000000
|
||||
+#define RT3883_PCIMEM_BASE 0x20000000
|
||||
+
|
||||
+#define RT3883_EHCI_BASE (RT3883_USBHOST_BASE)
|
||||
+#define RT3883_OHCI_BASE (RT3883_USBHOST_BASE + 0x1000)
|
||||
+
|
||||
+#define RT3883_SYSC_SIZE 0x100
|
||||
+#define RT3883_TIMER_SIZE 0x100
|
||||
+#define RT3883_INTC_SIZE 0x100
|
||||
+#define RT3883_MEMC_SIZE 0x100
|
||||
+#define RT3883_UART0_SIZE 0x100
|
||||
+#define RT3883_UART1_SIZE 0x100
|
||||
+#define RT3883_PIO_SIZE 0x100
|
||||
+#define RT3883_FSCC_SIZE 0x100
|
||||
+#define RT3883_NANDC_SIZE 0x0f0
|
||||
+#define RT3883_I2C_SIZE 0x100
|
||||
+#define RT3883_I2S_SIZE 0x100
|
||||
+#define RT3883_SPI_SIZE 0x100
|
||||
+#define RT3883_PCM_SIZE 0x800
|
||||
+#define RT3883_GDMA_SIZE 0x800
|
||||
+#define RT3883_CODEC1_SIZE 0x800
|
||||
+#define RT3883_CODEC2_SIZE 0x800
|
||||
+#define RT3883_FE_SIZE 0x10000
|
||||
+#define RT3883_ROM_SIZE 0x4000
|
||||
+#define RT3883_USBDEV_SIZE 0x4000
|
||||
+#define RT3883_PCI_SIZE 0x40000
|
||||
+#define RT3883_WLAN_SIZE 0x40000
|
||||
+#define RT3883_USBHOST_SIZE 0x40000
|
||||
+#define RT3883_BOOT_SIZE (32 * 1024 * 1024)
|
||||
+#define RT3883_SRAM_SIZE (32 * 1024 * 1024)
|
||||
+
|
||||
+/* SYSC registers */
|
||||
+#define RT3883_SYSC_REG_CHIPID0_3 0x00 /* Chip ID 0 */
|
||||
+#define RT3883_SYSC_REG_CHIPID4_7 0x04 /* Chip ID 1 */
|
||||
+#define RT3883_SYSC_REG_REVID 0x0c /* Chip Revision Identification */
|
||||
+#define RT3883_SYSC_REG_SYSCFG0 0x10 /* System Configuration 0 */
|
||||
+#define RT3883_SYSC_REG_SYSCFG1 0x14 /* System Configuration 1 */
|
||||
+#define RT3883_SYSC_REG_CLKCFG0 0x2c /* Clock Configuration 0 */
|
||||
+#define RT3883_SYSC_REG_CLKCFG1 0x30 /* Clock Configuration 1 */
|
||||
+#define RT3883_SYSC_REG_RSTCTRL 0x34 /* Reset Control*/
|
||||
+#define RT3883_SYSC_REG_RSTSTAT 0x38 /* Reset Status*/
|
||||
+#define RT3883_SYSC_REG_USB_PS 0x5c /* USB Power saving control */
|
||||
+#define RT3883_SYSC_REG_GPIO_MODE 0x60 /* GPIO Purpose Select */
|
||||
+#define RT3883_SYSC_REG_PCIE_CLK_GEN0 0x7c
|
||||
+#define RT3883_SYSC_REG_PCIE_CLK_GEN1 0x80
|
||||
+#define RT3883_SYSC_REG_PCIE_CLK_GEN2 0x84
|
||||
+#define RT3883_SYSC_REG_PMU 0x88
|
||||
+#define RT3883_SYSC_REG_PMU1 0x8c
|
||||
+
|
||||
+#define RT3883_CHIP_NAME0 0x38335452
|
||||
+#define RT3883_CHIP_NAME1 0x20203338
|
||||
+
|
||||
+#define RT3883_REVID_VER_ID_MASK 0x0f
|
||||
+#define RT3883_REVID_VER_ID_SHIFT 8
|
||||
+#define RT3883_REVID_ECO_ID_MASK 0x0f
|
||||
+
|
||||
+#define RT3883_SYSCFG0_DRAM_TYPE_DDR2 BIT(17)
|
||||
+#define RT3883_SYSCFG0_CPUCLK_SHIFT 8
|
||||
+#define RT3883_SYSCFG0_CPUCLK_MASK 0x3
|
||||
+#define RT3883_SYSCFG0_CPUCLK_250 0x0
|
||||
+#define RT3883_SYSCFG0_CPUCLK_384 0x1
|
||||
+#define RT3883_SYSCFG0_CPUCLK_480 0x2
|
||||
+#define RT3883_SYSCFG0_CPUCLK_500 0x3
|
||||
+
|
||||
+#define RT3883_SYSCFG1_USB0_HOST_MODE BIT(10)
|
||||
+#define RT3883_SYSCFG1_PCIE_RC_MODE BIT(8)
|
||||
+#define RT3883_SYSCFG1_PCI_HOST_MODE BIT(7)
|
||||
+#define RT3883_SYSCFG1_PCI_66M_MODE BIT(6)
|
||||
+#define RT3883_SYSCFG1_GPIO2_AS_WDT_OUT BIT(2)
|
||||
+
|
||||
+#define RT3883_CLKCFG1_PCIE_CLK_EN BIT(21)
|
||||
+#define RT3883_CLKCFG1_UPHY1_CLK_EN BIT(20)
|
||||
+#define RT3883_CLKCFG1_PCI_CLK_EN BIT(19)
|
||||
+#define RT3883_CLKCFG1_UPHY0_CLK_EN BIT(18)
|
||||
+
|
||||
+#define RT3883_GPIO_MODE_I2C BIT(0)
|
||||
+#define RT3883_GPIO_MODE_SPI BIT(1)
|
||||
+#define RT3883_GPIO_MODE_UART0_SHIFT 2
|
||||
+#define RT3883_GPIO_MODE_UART0_MASK 0x7
|
||||
+#define RT3883_GPIO_MODE_UART0(x) ((x) << RT3883_GPIO_MODE_UART0_SHIFT)
|
||||
+#define RT3883_GPIO_MODE_UARTF 0x0
|
||||
+#define RT3883_GPIO_MODE_PCM_UARTF 0x1
|
||||
+#define RT3883_GPIO_MODE_PCM_I2S 0x2
|
||||
+#define RT3883_GPIO_MODE_I2S_UARTF 0x3
|
||||
+#define RT3883_GPIO_MODE_PCM_GPIO 0x4
|
||||
+#define RT3883_GPIO_MODE_GPIO_UARTF 0x5
|
||||
+#define RT3883_GPIO_MODE_GPIO_I2S 0x6
|
||||
+#define RT3883_GPIO_MODE_GPIO 0x7
|
||||
+#define RT3883_GPIO_MODE_UART1 BIT(5)
|
||||
+#define RT3883_GPIO_MODE_JTAG BIT(6)
|
||||
+#define RT3883_GPIO_MODE_MDIO BIT(7)
|
||||
+#define RT3883_GPIO_MODE_GE1 BIT(9)
|
||||
+#define RT3883_GPIO_MODE_GE2 BIT(10)
|
||||
+#define RT3883_GPIO_MODE_PCI_SHIFT 11
|
||||
+#define RT3883_GPIO_MODE_PCI_MASK 0x7
|
||||
+#define RT3883_GPIO_MODE_PCI (RT3883_GPIO_MODE_PCI_MASK << RT3883_GPIO_MODE_PCI_SHIFT)
|
||||
+#define RT3883_GPIO_MODE_LNA_A_SHIFT 16
|
||||
+#define RT3883_GPIO_MODE_LNA_A_MASK 0x3
|
||||
+#define _RT3883_GPIO_MODE_LNA_A(_x) ((_x) << RT3883_GPIO_MODE_LNA_A_SHIFT)
|
||||
+#define RT3883_GPIO_MODE_LNA_A_GPIO 0x3
|
||||
+#define RT3883_GPIO_MODE_LNA_A _RT3883_GPIO_MODE_LNA_A(RT3883_GPIO_MODE_LNA_A_MASK)
|
||||
+#define RT3883_GPIO_MODE_LNA_G_SHIFT 18
|
||||
+#define RT3883_GPIO_MODE_LNA_G_MASK 0x3
|
||||
+#define _RT3883_GPIO_MODE_LNA_G(_x) ((_x) << RT3883_GPIO_MODE_LNA_G_SHIFT)
|
||||
+#define RT3883_GPIO_MODE_LNA_G_GPIO 0x3
|
||||
+#define RT3883_GPIO_MODE_LNA_G _RT3883_GPIO_MODE_LNA_G(RT3883_GPIO_MODE_LNA_G_MASK)
|
||||
+
|
||||
+#define RT3883_GPIO_I2C_SD 1
|
||||
+#define RT3883_GPIO_I2C_SCLK 2
|
||||
+#define RT3883_GPIO_SPI_CS0 3
|
||||
+#define RT3883_GPIO_SPI_CLK 4
|
||||
+#define RT3883_GPIO_SPI_MOSI 5
|
||||
+#define RT3883_GPIO_SPI_MISO 6
|
||||
+#define RT3883_GPIO_7 7
|
||||
+#define RT3883_GPIO_10 10
|
||||
+#define RT3883_GPIO_14 14
|
||||
+#define RT3883_GPIO_UART1_TXD 15
|
||||
+#define RT3883_GPIO_UART1_RXD 16
|
||||
+#define RT3883_GPIO_JTAG_TDO 17
|
||||
+#define RT3883_GPIO_JTAG_TDI 18
|
||||
+#define RT3883_GPIO_JTAG_TMS 19
|
||||
+#define RT3883_GPIO_JTAG_TCLK 20
|
||||
+#define RT3883_GPIO_JTAG_TRST_N 21
|
||||
+#define RT3883_GPIO_MDIO_MDC 22
|
||||
+#define RT3883_GPIO_MDIO_MDIO 23
|
||||
+#define RT3883_GPIO_LNA_PE_A0 32
|
||||
+#define RT3883_GPIO_LNA_PE_A1 33
|
||||
+#define RT3883_GPIO_LNA_PE_A2 34
|
||||
+#define RT3883_GPIO_LNA_PE_G0 35
|
||||
+#define RT3883_GPIO_LNA_PE_G1 36
|
||||
+#define RT3883_GPIO_LNA_PE_G2 37
|
||||
+#define RT3883_GPIO_PCI_AD0 40
|
||||
+#define RT3883_GPIO_PCI_AD31 71
|
||||
+#define RT3883_GPIO_GE2_TXD0 72
|
||||
+#define RT3883_GPIO_GE2_TXD1 73
|
||||
+#define RT3883_GPIO_GE2_TXD2 74
|
||||
+#define RT3883_GPIO_GE2_TXD3 75
|
||||
+#define RT3883_GPIO_GE2_TXEN 76
|
||||
+#define RT3883_GPIO_GE2_TXCLK 77
|
||||
+#define RT3883_GPIO_GE2_RXD0 78
|
||||
+#define RT3883_GPIO_GE2_RXD1 79
|
||||
+#define RT3883_GPIO_GE2_RXD2 80
|
||||
+#define RT3883_GPIO_GE2_RXD3 81
|
||||
+#define RT3883_GPIO_GE2_RXDV 82
|
||||
+#define RT3883_GPIO_GE2_RXCLK 83
|
||||
+#define RT3883_GPIO_GE1_TXD0 84
|
||||
+#define RT3883_GPIO_GE1_TXD1 85
|
||||
+#define RT3883_GPIO_GE1_TXD2 86
|
||||
+#define RT3883_GPIO_GE1_TXD3 87
|
||||
+#define RT3883_GPIO_GE1_TXEN 88
|
||||
+#define RT3883_GPIO_GE1_TXCLK 89
|
||||
+#define RT3883_GPIO_GE1_RXD0 90
|
||||
+#define RT3883_GPIO_GE1_RXD1 91
|
||||
+#define RT3883_GPIO_GE1_RXD2 92
|
||||
+#define RT3883_GPIO_GE1_RXD3 93
|
||||
+#define RT3883_GPIO_GE1_RXDV 94
|
||||
+#define RT3883_GPIO_GE1_RXCLK 95
|
||||
+
|
||||
+#define RT3883_RSTCTRL_PCIE_PCI_PDM BIT(27)
|
||||
+#define RT3883_RSTCTRL_FLASH BIT(26)
|
||||
+#define RT3883_RSTCTRL_UDEV BIT(25)
|
||||
+#define RT3883_RSTCTRL_PCI BIT(24)
|
||||
+#define RT3883_RSTCTRL_PCIE BIT(23)
|
||||
+#define RT3883_RSTCTRL_UHST BIT(22)
|
||||
+#define RT3883_RSTCTRL_FE BIT(21)
|
||||
+#define RT3883_RSTCTRL_WLAN BIT(20)
|
||||
+#define RT3883_RSTCTRL_UART1 BIT(29)
|
||||
+#define RT3883_RSTCTRL_SPI BIT(18)
|
||||
+#define RT3883_RSTCTRL_I2S BIT(17)
|
||||
+#define RT3883_RSTCTRL_I2C BIT(16)
|
||||
+#define RT3883_RSTCTRL_NAND BIT(15)
|
||||
+#define RT3883_RSTCTRL_DMA BIT(14)
|
||||
+#define RT3883_RSTCTRL_PIO BIT(13)
|
||||
+#define RT3883_RSTCTRL_UART BIT(12)
|
||||
+#define RT3883_RSTCTRL_PCM BIT(11)
|
||||
+#define RT3883_RSTCTRL_MC BIT(10)
|
||||
+#define RT3883_RSTCTRL_INTC BIT(9)
|
||||
+#define RT3883_RSTCTRL_TIMER BIT(8)
|
||||
+#define RT3883_RSTCTRL_SYS BIT(0)
|
||||
+
|
||||
+#define RT3883_INTC_INT_SYSCTL BIT(0)
|
||||
+#define RT3883_INTC_INT_TIMER0 BIT(1)
|
||||
+#define RT3883_INTC_INT_TIMER1 BIT(2)
|
||||
+#define RT3883_INTC_INT_IA BIT(3)
|
||||
+#define RT3883_INTC_INT_PCM BIT(4)
|
||||
+#define RT3883_INTC_INT_UART0 BIT(5)
|
||||
+#define RT3883_INTC_INT_PIO BIT(6)
|
||||
+#define RT3883_INTC_INT_DMA BIT(7)
|
||||
+#define RT3883_INTC_INT_NAND BIT(8)
|
||||
+#define RT3883_INTC_INT_PERFC BIT(9)
|
||||
+#define RT3883_INTC_INT_I2S BIT(10)
|
||||
+#define RT3883_INTC_INT_UART1 BIT(12)
|
||||
+#define RT3883_INTC_INT_UHST BIT(18)
|
||||
+#define RT3883_INTC_INT_UDEV BIT(19)
|
||||
+
|
||||
+/* FLASH/SRAM/Codec Controller registers */
|
||||
+#define RT3883_FSCC_REG_FLASH_CFG0 0x00
|
||||
+#define RT3883_FSCC_REG_FLASH_CFG1 0x04
|
||||
+#define RT3883_FSCC_REG_CODEC_CFG0 0x40
|
||||
+#define RT3883_FSCC_REG_CODEC_CFG1 0x44
|
||||
+
|
||||
+#define RT3883_FLASH_CFG_WIDTH_SHIFT 26
|
||||
+#define RT3883_FLASH_CFG_WIDTH_MASK 0x3
|
||||
+#define RT3883_FLASH_CFG_WIDTH_8BIT 0x0
|
||||
+#define RT3883_FLASH_CFG_WIDTH_16BIT 0x1
|
||||
+#define RT3883_FLASH_CFG_WIDTH_32BIT 0x2
|
||||
+
|
||||
+#endif /* _RT3883_REGS_H_ */
|
||||
diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
|
||||
index 6723b94..ce57d3e 100644
|
||||
--- a/arch/mips/ralink/Kconfig
|
||||
+++ b/arch/mips/ralink/Kconfig
|
||||
@@ -15,6 +15,11 @@ choice
|
||||
select USB_ARCH_HAS_OHCI
|
||||
select USB_ARCH_HAS_EHCI
|
||||
|
||||
+ config SOC_RT3883
|
||||
+ bool "RT3883"
|
||||
+ select USB_ARCH_HAS_OHCI
|
||||
+ select USB_ARCH_HAS_EHCI
|
||||
+
|
||||
endchoice
|
||||
|
||||
choice
|
||||
diff --git a/arch/mips/ralink/Makefile b/arch/mips/ralink/Makefile
|
||||
index 6d826f2..ba9669c 100644
|
||||
--- a/arch/mips/ralink/Makefile
|
||||
+++ b/arch/mips/ralink/Makefile
|
||||
@@ -10,6 +10,7 @@ obj-y := prom.o of.o reset.o clk.o irq.o
|
||||
|
||||
obj-$(CONFIG_SOC_RT288X) += rt288x.o
|
||||
obj-$(CONFIG_SOC_RT305X) += rt305x.o
|
||||
+obj-$(CONFIG_SOC_RT3883) += rt3883.o
|
||||
|
||||
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
|
||||
|
||||
diff --git a/arch/mips/ralink/Platform b/arch/mips/ralink/Platform
|
||||
index 3f49e51..f67c08d 100644
|
||||
--- a/arch/mips/ralink/Platform
|
||||
+++ b/arch/mips/ralink/Platform
|
||||
@@ -13,3 +13,8 @@ load-$(CONFIG_SOC_RT288X) += 0xffffffff88000000
|
||||
# Ralink RT305x
|
||||
#
|
||||
load-$(CONFIG_SOC_RT305X) += 0xffffffff80000000
|
||||
+
|
||||
+#
|
||||
+# Ralink RT3883
|
||||
+#
|
||||
+load-$(CONFIG_SOC_RT3883) += 0xffffffff80000000
|
||||
diff --git a/arch/mips/ralink/rt3883.c b/arch/mips/ralink/rt3883.c
|
||||
new file mode 100644
|
||||
index 0000000..2d90aa9
|
||||
--- /dev/null
|
||||
+++ b/arch/mips/ralink/rt3883.c
|
||||
@@ -0,0 +1,242 @@
|
||||
+/*
|
||||
+ * This program is free software; you can redistribute it and/or modify it
|
||||
+ * under the terms of the GNU General Public License version 2 as published
|
||||
+ * by the Free Software Foundation.
|
||||
+ *
|
||||
+ * Parts of this file are based on Ralink's 2.6.21 BSP
|
||||
+ *
|
||||
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
|
||||
+ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
|
||||
+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
|
||||
+ */
|
||||
+
|
||||
+#include <linux/kernel.h>
|
||||
+#include <linux/init.h>
|
||||
+#include <linux/module.h>
|
||||
+
|
||||
+#include <asm/mipsregs.h>
|
||||
+#include <asm/mach-ralink/ralink_regs.h>
|
||||
+#include <asm/mach-ralink/rt3883.h>
|
||||
+
|
||||
+#include "common.h"
|
||||
+
|
||||
+static struct ralink_pinmux_grp mode_mux[] = {
|
||||
+ {
|
||||
+ .name = "i2c",
|
||||
+ .mask = RT3883_GPIO_MODE_I2C,
|
||||
+ .gpio_first = RT3883_GPIO_I2C_SD,
|
||||
+ .gpio_last = RT3883_GPIO_I2C_SCLK,
|
||||
+ }, {
|
||||
+ .name = "spi",
|
||||
+ .mask = RT3883_GPIO_MODE_SPI,
|
||||
+ .gpio_first = RT3883_GPIO_SPI_CS0,
|
||||
+ .gpio_last = RT3883_GPIO_SPI_MISO,
|
||||
+ }, {
|
||||
+ .name = "uartlite",
|
||||
+ .mask = RT3883_GPIO_MODE_UART1,
|
||||
+ .gpio_first = RT3883_GPIO_UART1_TXD,
|
||||
+ .gpio_last = RT3883_GPIO_UART1_RXD,
|
||||
+ }, {
|
||||
+ .name = "jtag",
|
||||
+ .mask = RT3883_GPIO_MODE_JTAG,
|
||||
+ .gpio_first = RT3883_GPIO_JTAG_TDO,
|
||||
+ .gpio_last = RT3883_GPIO_JTAG_TCLK,
|
||||
+ }, {
|
||||
+ .name = "mdio",
|
||||
+ .mask = RT3883_GPIO_MODE_MDIO,
|
||||
+ .gpio_first = RT3883_GPIO_MDIO_MDC,
|
||||
+ .gpio_last = RT3883_GPIO_MDIO_MDIO,
|
||||
+ }, {
|
||||
+ .name = "ge1",
|
||||
+ .mask = RT3883_GPIO_MODE_GE1,
|
||||
+ .gpio_first = RT3883_GPIO_GE1_TXD0,
|
||||
+ .gpio_last = RT3883_GPIO_GE1_RXCLK,
|
||||
+ }, {
|
||||
+ .name = "ge2",
|
||||
+ .mask = RT3883_GPIO_MODE_GE2,
|
||||
+ .gpio_first = RT3883_GPIO_GE2_TXD0,
|
||||
+ .gpio_last = RT3883_GPIO_GE2_RXCLK,
|
||||
+ }, {
|
||||
+ .name = "pci",
|
||||
+ .mask = RT3883_GPIO_MODE_PCI,
|
||||
+ .gpio_first = RT3883_GPIO_PCI_AD0,
|
||||
+ .gpio_last = RT3883_GPIO_PCI_AD31,
|
||||
+ }, {
|
||||
+ .name = "lna a",
|
||||
+ .mask = RT3883_GPIO_MODE_LNA_A,
|
||||
+ .gpio_first = RT3883_GPIO_LNA_PE_A0,
|
||||
+ .gpio_last = RT3883_GPIO_LNA_PE_A2,
|
||||
+ }, {
|
||||
+ .name = "lna g",
|
||||
+ .mask = RT3883_GPIO_MODE_LNA_G,
|
||||
+ .gpio_first = RT3883_GPIO_LNA_PE_G0,
|
||||
+ .gpio_last = RT3883_GPIO_LNA_PE_G2,
|
||||
+ }, {0}
|
||||
+};
|
||||
+
|
||||
+static struct ralink_pinmux_grp uart_mux[] = {
|
||||
+ {
|
||||
+ .name = "uartf",
|
||||
+ .mask = RT3883_GPIO_MODE_UARTF,
|
||||
+ .gpio_first = RT3883_GPIO_7,
|
||||
+ .gpio_last = RT3883_GPIO_14,
|
||||
+ }, {
|
||||
+ .name = "pcm uartf",
|
||||
+ .mask = RT3883_GPIO_MODE_PCM_UARTF,
|
||||
+ .gpio_first = RT3883_GPIO_7,
|
||||
+ .gpio_last = RT3883_GPIO_14,
|
||||
+ }, {
|
||||
+ .name = "pcm i2s",
|
||||
+ .mask = RT3883_GPIO_MODE_PCM_I2S,
|
||||
+ .gpio_first = RT3883_GPIO_7,
|
||||
+ .gpio_last = RT3883_GPIO_14,
|
||||
+ }, {
|
||||
+ .name = "i2s uartf",
|
||||
+ .mask = RT3883_GPIO_MODE_I2S_UARTF,
|
||||
+ .gpio_first = RT3883_GPIO_7,
|
||||
+ .gpio_last = RT3883_GPIO_14,
|
||||
+ }, {
|
||||
+ .name = "pcm gpio",
|
||||
+ .mask = RT3883_GPIO_MODE_PCM_GPIO,
|
||||
+ .gpio_first = RT3883_GPIO_11,
|
||||
+ .gpio_last = RT3883_GPIO_14,
|
||||
+ }, {
|
||||
+ .name = "gpio uartf",
|
||||
+ .mask = RT3883_GPIO_MODE_GPIO_UARTF,
|
||||
+ .gpio_first = RT3883_GPIO_7,
|
||||
+ .gpio_last = RT3883_GPIO_10,
|
||||
+ }, {
|
||||
+ .name = "gpio i2s",
|
||||
+ .mask = RT3883_GPIO_MODE_GPIO_I2S,
|
||||
+ .gpio_first = RT3883_GPIO_7,
|
||||
+ .gpio_last = RT3883_GPIO_10,
|
||||
+ }, {
|
||||
+ .name = "gpio",
|
||||
+ .mask = RT3883_GPIO_MODE_GPIO,
|
||||
+ }, {0}
|
||||
+};
|
||||
+
|
||||
+static struct ralink_pinmux_grp pci_mux[] = {
|
||||
+ {
|
||||
+ .name = "pci-dev",
|
||||
+ .mask = 0,
|
||||
+ .gpio_first = RT3883_GPIO_PCI_AD0,
|
||||
+ .gpio_last = RT3883_GPIO_PCI_AD31,
|
||||
+ }, {
|
||||
+ .name = "pci-host2",
|
||||
+ .mask = 1,
|
||||
+ .gpio_first = RT3883_GPIO_PCI_AD0,
|
||||
+ .gpio_last = RT3883_GPIO_PCI_AD31,
|
||||
+ }, {
|
||||
+ .name = "pci-host1",
|
||||
+ .mask = 2,
|
||||
+ .gpio_first = RT3883_GPIO_PCI_AD0,
|
||||
+ .gpio_last = RT3883_GPIO_PCI_AD31,
|
||||
+ }, {
|
||||
+ .name = "pci-fnc",
|
||||
+ .mask = 3,
|
||||
+ .gpio_first = RT3883_GPIO_PCI_AD0,
|
||||
+ .gpio_last = RT3883_GPIO_PCI_AD31,
|
||||
+ }, {
|
||||
+ .name = "pci-gpio",
|
||||
+ .mask = 7,
|
||||
+ .gpio_first = RT3883_GPIO_PCI_AD0,
|
||||
+ .gpio_last = RT3883_GPIO_PCI_AD31,
|
||||
+ }, {0}
|
||||
+};
|
||||
+
|
||||
+static void rt3883_wdt_reset(void)
|
||||
+{
|
||||
+ u32 t;
|
||||
+
|
||||
+ /* enable WDT reset output on GPIO 2 */
|
||||
+ t = rt_sysc_r32(RT3883_SYSC_REG_SYSCFG1);
|
||||
+ t |= RT3883_SYSCFG1_GPIO2_AS_WDT_OUT;
|
||||
+ rt_sysc_w32(t, RT3883_SYSC_REG_SYSCFG1);
|
||||
+}
|
||||
+
|
||||
+struct ralink_pinmux rt_gpio_pinmux = {
|
||||
+ .mode = mode_mux,
|
||||
+ .uart = uart_mux,
|
||||
+ .uart_shift = RT3883_GPIO_MODE_UART0_SHIFT,
|
||||
+ .uart_mask = RT3883_GPIO_MODE_GPIO,
|
||||
+ .wdt_reset = rt3883_wdt_reset,
|
||||
+ .pci = pci_mux,
|
||||
+ .pci_shift = RT3883_GPIO_MODE_PCI_SHIFT,
|
||||
+ .pci_mask = RT3883_GPIO_MODE_PCI_MASK,
|
||||
+};
|
||||
+
|
||||
+void __init ralink_clk_init(void)
|
||||
+{
|
||||
+ unsigned long cpu_rate, sys_rate;
|
||||
+ u32 syscfg0;
|
||||
+ u32 clksel;
|
||||
+ u32 ddr2;
|
||||
+
|
||||
+ syscfg0 = rt_sysc_r32(RT3883_SYSC_REG_SYSCFG0);
|
||||
+ clksel = ((syscfg0 >> RT3883_SYSCFG0_CPUCLK_SHIFT) &
|
||||
+ RT3883_SYSCFG0_CPUCLK_MASK);
|
||||
+ ddr2 = syscfg0 & RT3883_SYSCFG0_DRAM_TYPE_DDR2;
|
||||
+
|
||||
+ switch (clksel) {
|
||||
+ case RT3883_SYSCFG0_CPUCLK_250:
|
||||
+ cpu_rate = 250000000;
|
||||
+ sys_rate = (ddr2) ? 125000000 : 83000000;
|
||||
+ break;
|
||||
+ case RT3883_SYSCFG0_CPUCLK_384:
|
||||
+ cpu_rate = 384000000;
|
||||
+ sys_rate = (ddr2) ? 128000000 : 96000000;
|
||||
+ break;
|
||||
+ case RT3883_SYSCFG0_CPUCLK_480:
|
||||
+ cpu_rate = 480000000;
|
||||
+ sys_rate = (ddr2) ? 160000000 : 120000000;
|
||||
+ break;
|
||||
+ case RT3883_SYSCFG0_CPUCLK_500:
|
||||
+ cpu_rate = 500000000;
|
||||
+ sys_rate = (ddr2) ? 166000000 : 125000000;
|
||||
+ break;
|
||||
+ }
|
||||
+
|
||||
+ ralink_clk_add("cpu", cpu_rate);
|
||||
+ ralink_clk_add("10000100.timer", sys_rate);
|
||||
+ ralink_clk_add("10000120.watchdog", sys_rate);
|
||||
+ ralink_clk_add("10000500.uart", 40000000);
|
||||
+ ralink_clk_add("10000b00.spi", sys_rate);
|
||||
+ ralink_clk_add("10000c00.uartlite", 40000000);
|
||||
+ ralink_clk_add("10100000.ethernet", sys_rate);
|
||||
+}
|
||||
+
|
||||
+void __init ralink_of_remap(void)
|
||||
+{
|
||||
+ rt_sysc_membase = plat_of_remap_node("ralink,rt3883-sysc");
|
||||
+ rt_memc_membase = plat_of_remap_node("ralink,rt3883-memc");
|
||||
+
|
||||
+ if (!rt_sysc_membase || !rt_memc_membase)
|
||||
+ panic("Failed to remap core resources");
|
||||
+}
|
||||
+
|
||||
+void prom_soc_init(struct ralink_soc_info *soc_info)
|
||||
+{
|
||||
+ void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT3883_SYSC_BASE);
|
||||
+ const char *name;
|
||||
+ u32 n0;
|
||||
+ u32 n1;
|
||||
+ u32 id;
|
||||
+
|
||||
+ n0 = __raw_readl(sysc + RT3883_SYSC_REG_CHIPID0_3);
|
||||
+ n1 = __raw_readl(sysc + RT3883_SYSC_REG_CHIPID4_7);
|
||||
+ id = __raw_readl(sysc + RT3883_SYSC_REG_REVID);
|
||||
+
|
||||
+ if (n0 == RT3883_CHIP_NAME0 && n1 == RT3883_CHIP_NAME1) {
|
||||
+ soc_info->compatible = "ralink,rt3883-soc";
|
||||
+ name = "RT3883";
|
||||
+ } else {
|
||||
+ panic("rt3883: unknown SoC, n0:%08x n1:%08x", n0, n1);
|
||||
+ }
|
||||
+
|
||||
+ snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,
|
||||
+ "Ralink %s ver:%u eco:%u",
|
||||
+ name,
|
||||
+ (id >> RT3883_REVID_VER_ID_SHIFT) & RT3883_REVID_VER_ID_MASK,
|
||||
+ (id & RT3883_REVID_ECO_ID_MASK));
|
||||
+}
|
||||
--
|
||||
1.7.10.4
|
||||
|
||||
|
|
@ -0,0 +1,366 @@
|
|||
From 41b7b06b494eef5a081363566314960306437d73 Mon Sep 17 00:00:00 2001
|
||||
From: John Crispin <blogic@openwrt.org>
|
||||
Date: Thu, 21 Mar 2013 17:49:02 +0100
|
||||
Subject: [PATCH 29/79] MIPS: ralink: adds support for MT7620 SoC family
|
||||
|
||||
Add support code for mt7620 SOC.
|
||||
|
||||
The code detects the SoC and registers the clk / pinmux settings.
|
||||
|
||||
Signed-off-by: John Crispin <blogic@openwrt.org>
|
||||
Acked-by: Gabor Juhos <juhosg@openwrt.org>
|
||||
Patchwork: http://patchwork.linux-mips.org/patch/5177/
|
||||
---
|
||||
arch/mips/include/asm/mach-ralink/mt7620.h | 76 ++++++++++
|
||||
arch/mips/ralink/Kconfig | 3 +
|
||||
arch/mips/ralink/Makefile | 1 +
|
||||
arch/mips/ralink/Platform | 5 +
|
||||
arch/mips/ralink/mt7620.c | 214 ++++++++++++++++++++++++++++
|
||||
5 files changed, 299 insertions(+)
|
||||
create mode 100644 arch/mips/include/asm/mach-ralink/mt7620.h
|
||||
create mode 100644 arch/mips/ralink/mt7620.c
|
||||
|
||||
diff --git a/arch/mips/include/asm/mach-ralink/mt7620.h b/arch/mips/include/asm/mach-ralink/mt7620.h
|
||||
new file mode 100644
|
||||
index 0000000..b272649
|
||||
--- /dev/null
|
||||
+++ b/arch/mips/include/asm/mach-ralink/mt7620.h
|
||||
@@ -0,0 +1,76 @@
|
||||
+/*
|
||||
+ * This program is free software; you can redistribute it and/or modify it
|
||||
+ * under the terms of the GNU General Public License version 2 as published
|
||||
+ * by the Free Software Foundation.
|
||||
+ *
|
||||
+ * Parts of this file are based on Ralink's 2.6.21 BSP
|
||||
+ *
|
||||
+ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
|
||||
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
|
||||
+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
|
||||
+ */
|
||||
+
|
||||
+#ifndef _MT7620_REGS_H_
|
||||
+#define _MT7620_REGS_H_
|
||||
+
|
||||
+#define MT7620_SYSC_BASE 0x10000000
|
||||
+
|
||||
+#define SYSC_REG_CHIP_NAME0 0x00
|
||||
+#define SYSC_REG_CHIP_NAME1 0x04
|
||||
+#define SYSC_REG_CHIP_REV 0x0c
|
||||
+#define SYSC_REG_SYSTEM_CONFIG0 0x10
|
||||
+#define SYSC_REG_SYSTEM_CONFIG1 0x14
|
||||
+#define SYSC_REG_CPLL_CONFIG0 0x54
|
||||
+#define SYSC_REG_CPLL_CONFIG1 0x58
|
||||
+
|
||||
+#define MT7620N_CHIP_NAME0 0x33365452
|
||||
+#define MT7620N_CHIP_NAME1 0x20203235
|
||||
+
|
||||
+#define MT7620A_CHIP_NAME0 0x3637544d
|
||||
+#define MT7620A_CHIP_NAME1 0x20203032
|
||||
+
|
||||
+#define CHIP_REV_PKG_MASK 0x1
|
||||
+#define CHIP_REV_PKG_SHIFT 16
|
||||
+#define CHIP_REV_VER_MASK 0xf
|
||||
+#define CHIP_REV_VER_SHIFT 8
|
||||
+#define CHIP_REV_ECO_MASK 0xf
|
||||
+
|
||||
+#define CPLL_SW_CONFIG_SHIFT 31
|
||||
+#define CPLL_SW_CONFIG_MASK 0x1
|
||||
+#define CPLL_CPU_CLK_SHIFT 24
|
||||
+#define CPLL_CPU_CLK_MASK 0x1
|
||||
+#define CPLL_MULT_RATIO_SHIFT 16
|
||||
+#define CPLL_MULT_RATIO 0x7
|
||||
+#define CPLL_DIV_RATIO_SHIFT 10
|
||||
+#define CPLL_DIV_RATIO 0x3
|
||||
+
|
||||
+#define SYSCFG0_DRAM_TYPE_MASK 0x3
|
||||
+#define SYSCFG0_DRAM_TYPE_SHIFT 4
|
||||
+#define SYSCFG0_DRAM_TYPE_SDRAM 0
|
||||
+#define SYSCFG0_DRAM_TYPE_DDR1 1
|
||||
+#define SYSCFG0_DRAM_TYPE_DDR2 2
|
||||
+
|
||||
+#define MT7620_GPIO_MODE_I2C BIT(0)
|
||||
+#define MT7620_GPIO_MODE_UART0_SHIFT 2
|
||||
+#define MT7620_GPIO_MODE_UART0_MASK 0x7
|
||||
+#define MT7620_GPIO_MODE_UART0(x) ((x) << MT7620_GPIO_MODE_UART0_SHIFT)
|
||||
+#define MT7620_GPIO_MODE_UARTF 0x0
|
||||
+#define MT7620_GPIO_MODE_PCM_UARTF 0x1
|
||||
+#define MT7620_GPIO_MODE_PCM_I2S 0x2
|
||||
+#define MT7620_GPIO_MODE_I2S_UARTF 0x3
|
||||
+#define MT7620_GPIO_MODE_PCM_GPIO 0x4
|
||||
+#define MT7620_GPIO_MODE_GPIO_UARTF 0x5
|
||||
+#define MT7620_GPIO_MODE_GPIO_I2S 0x6
|
||||
+#define MT7620_GPIO_MODE_GPIO 0x7
|
||||
+#define MT7620_GPIO_MODE_UART1 BIT(5)
|
||||
+#define MT7620_GPIO_MODE_MDIO BIT(8)
|
||||
+#define MT7620_GPIO_MODE_RGMII1 BIT(9)
|
||||
+#define MT7620_GPIO_MODE_RGMII2 BIT(10)
|
||||
+#define MT7620_GPIO_MODE_SPI BIT(11)
|
||||
+#define MT7620_GPIO_MODE_SPI_REF_CLK BIT(12)
|
||||
+#define MT7620_GPIO_MODE_WLED BIT(13)
|
||||
+#define MT7620_GPIO_MODE_JTAG BIT(15)
|
||||
+#define MT7620_GPIO_MODE_EPHY BIT(15)
|
||||
+#define MT7620_GPIO_MODE_WDT BIT(22)
|
||||
+
|
||||
+#endif
|
||||
diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
|
||||
index ce57d3e..86f6c77 100644
|
||||
--- a/arch/mips/ralink/Kconfig
|
||||
+++ b/arch/mips/ralink/Kconfig
|
||||
@@ -20,6 +20,9 @@ choice
|
||||
select USB_ARCH_HAS_OHCI
|
||||
select USB_ARCH_HAS_EHCI
|
||||
|
||||
+ config SOC_MT7620
|
||||
+ bool "MT7620"
|
||||
+
|
||||
endchoice
|
||||
|
||||
choice
|
||||
diff --git a/arch/mips/ralink/Makefile b/arch/mips/ralink/Makefile
|
||||
index ba9669c..38cf1a8 100644
|
||||
--- a/arch/mips/ralink/Makefile
|
||||
+++ b/arch/mips/ralink/Makefile
|
||||
@@ -11,6 +11,7 @@ obj-y := prom.o of.o reset.o clk.o irq.o
|
||||
obj-$(CONFIG_SOC_RT288X) += rt288x.o
|
||||
obj-$(CONFIG_SOC_RT305X) += rt305x.o
|
||||
obj-$(CONFIG_SOC_RT3883) += rt3883.o
|
||||
+obj-$(CONFIG_SOC_MT7620) += mt7620.o
|
||||
|
||||
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
|
||||
|
||||
diff --git a/arch/mips/ralink/Platform b/arch/mips/ralink/Platform
|
||||
index f67c08d..b2cbf16 100644
|
||||
--- a/arch/mips/ralink/Platform
|
||||
+++ b/arch/mips/ralink/Platform
|
||||
@@ -18,3 +18,8 @@ load-$(CONFIG_SOC_RT305X) += 0xffffffff80000000
|
||||
# Ralink RT3883
|
||||
#
|
||||
load-$(CONFIG_SOC_RT3883) += 0xffffffff80000000
|
||||
+
|
||||
+#
|
||||
+# Ralink MT7620
|
||||
+#
|
||||
+load-$(CONFIG_SOC_MT7620) += 0xffffffff80000000
|
||||
diff --git a/arch/mips/ralink/mt7620.c b/arch/mips/ralink/mt7620.c
|
||||
new file mode 100644
|
||||
index 0000000..eb00ab8
|
||||
--- /dev/null
|
||||
+++ b/arch/mips/ralink/mt7620.c
|
||||
@@ -0,0 +1,214 @@
|
||||
+/*
|
||||
+ * This program is free software; you can redistribute it and/or modify it
|
||||
+ * under the terms of the GNU General Public License version 2 as published
|
||||
+ * by the Free Software Foundation.
|
||||
+ *
|
||||
+ * Parts of this file are based on Ralink's 2.6.21 BSP
|
||||
+ *
|
||||
+ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
|
||||
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
|
||||
+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
|
||||
+ */
|
||||
+
|
||||
+#include <linux/kernel.h>
|
||||
+#include <linux/init.h>
|
||||
+#include <linux/module.h>
|
||||
+
|
||||
+#include <asm/mipsregs.h>
|
||||
+#include <asm/mach-ralink/ralink_regs.h>
|
||||
+#include <asm/mach-ralink/mt7620.h>
|
||||
+
|
||||
+#include "common.h"
|
||||
+
|
||||
+/* does the board have sdram or ddram */
|
||||
+static int dram_type;
|
||||
+
|
||||
+/* the pll dividers */
|
||||
+static u32 mt7620_clk_divider[] = { 2, 3, 4, 8 };
|
||||
+
|
||||
+static struct ralink_pinmux_grp mode_mux[] = {
|
||||
+ {
|
||||
+ .name = "i2c",
|
||||
+ .mask = MT7620_GPIO_MODE_I2C,
|
||||
+ .gpio_first = 1,
|
||||
+ .gpio_last = 2,
|
||||
+ }, {
|
||||
+ .name = "spi",
|
||||
+ .mask = MT7620_GPIO_MODE_SPI,
|
||||
+ .gpio_first = 3,
|
||||
+ .gpio_last = 6,
|
||||
+ }, {
|
||||
+ .name = "uartlite",
|
||||
+ .mask = MT7620_GPIO_MODE_UART1,
|
||||
+ .gpio_first = 15,
|
||||
+ .gpio_last = 16,
|
||||
+ }, {
|
||||
+ .name = "wdt",
|
||||
+ .mask = MT7620_GPIO_MODE_WDT,
|
||||
+ .gpio_first = 17,
|
||||
+ .gpio_last = 17,
|
||||
+ }, {
|
||||
+ .name = "mdio",
|
||||
+ .mask = MT7620_GPIO_MODE_MDIO,
|
||||
+ .gpio_first = 22,
|
||||
+ .gpio_last = 23,
|
||||
+ }, {
|
||||
+ .name = "rgmii1",
|
||||
+ .mask = MT7620_GPIO_MODE_RGMII1,
|
||||
+ .gpio_first = 24,
|
||||
+ .gpio_last = 35,
|
||||
+ }, {
|
||||
+ .name = "spi refclk",
|
||||
+ .mask = MT7620_GPIO_MODE_SPI_REF_CLK,
|
||||
+ .gpio_first = 37,
|
||||
+ .gpio_last = 39,
|
||||
+ }, {
|
||||
+ .name = "jtag",
|
||||
+ .mask = MT7620_GPIO_MODE_JTAG,
|
||||
+ .gpio_first = 40,
|
||||
+ .gpio_last = 44,
|
||||
+ }, {
|
||||
+ /* shared lines with jtag */
|
||||
+ .name = "ephy",
|
||||
+ .mask = MT7620_GPIO_MODE_EPHY,
|
||||
+ .gpio_first = 40,
|
||||
+ .gpio_last = 44,
|
||||
+ }, {
|
||||
+ .name = "nand",
|
||||
+ .mask = MT7620_GPIO_MODE_JTAG,
|
||||
+ .gpio_first = 45,
|
||||
+ .gpio_last = 59,
|
||||
+ }, {
|
||||
+ .name = "rgmii2",
|
||||
+ .mask = MT7620_GPIO_MODE_RGMII2,
|
||||
+ .gpio_first = 60,
|
||||
+ .gpio_last = 71,
|
||||
+ }, {
|
||||
+ .name = "wled",
|
||||
+ .mask = MT7620_GPIO_MODE_WLED,
|
||||
+ .gpio_first = 72,
|
||||
+ .gpio_last = 72,
|
||||
+ }, {0}
|
||||
+};
|
||||
+
|
||||
+static struct ralink_pinmux_grp uart_mux[] = {
|
||||
+ {
|
||||
+ .name = "uartf",
|
||||
+ .mask = MT7620_GPIO_MODE_UARTF,
|
||||
+ .gpio_first = 7,
|
||||
+ .gpio_last = 14,
|
||||
+ }, {
|
||||
+ .name = "pcm uartf",
|
||||
+ .mask = MT7620_GPIO_MODE_PCM_UARTF,
|
||||
+ .gpio_first = 7,
|
||||
+ .gpio_last = 14,
|
||||
+ }, {
|
||||
+ .name = "pcm i2s",
|
||||
+ .mask = MT7620_GPIO_MODE_PCM_I2S,
|
||||
+ .gpio_first = 7,
|
||||
+ .gpio_last = 14,
|
||||
+ }, {
|
||||
+ .name = "i2s uartf",
|
||||
+ .mask = MT7620_GPIO_MODE_I2S_UARTF,
|
||||
+ .gpio_first = 7,
|
||||
+ .gpio_last = 14,
|
||||
+ }, {
|
||||
+ .name = "pcm gpio",
|
||||
+ .mask = MT7620_GPIO_MODE_PCM_GPIO,
|
||||
+ .gpio_first = 11,
|
||||
+ .gpio_last = 14,
|
||||
+ }, {
|
||||
+ .name = "gpio uartf",
|
||||
+ .mask = MT7620_GPIO_MODE_GPIO_UARTF,
|
||||
+ .gpio_first = 7,
|
||||
+ .gpio_last = 10,
|
||||
+ }, {
|
||||
+ .name = "gpio i2s",
|
||||
+ .mask = MT7620_GPIO_MODE_GPIO_I2S,
|
||||
+ .gpio_first = 7,
|
||||
+ .gpio_last = 10,
|
||||
+ }, {
|
||||
+ .name = "gpio",
|
||||
+ .mask = MT7620_GPIO_MODE_GPIO,
|
||||
+ }, {0}
|
||||
+};
|
||||
+
|
||||
+struct ralink_pinmux rt_gpio_pinmux = {
|
||||
+ .mode = mode_mux,
|
||||
+ .uart = uart_mux,
|
||||
+ .uart_shift = MT7620_GPIO_MODE_UART0_SHIFT,
|
||||
+ .uart_mask = MT7620_GPIO_MODE_GPIO,
|
||||
+};
|
||||
+
|
||||
+void __init ralink_clk_init(void)
|
||||
+{
|
||||
+ unsigned long cpu_rate, sys_rate;
|
||||
+ u32 c0 = rt_sysc_r32(SYSC_REG_CPLL_CONFIG0);
|
||||
+ u32 c1 = rt_sysc_r32(SYSC_REG_CPLL_CONFIG1);
|
||||
+ u32 swconfig = (c0 >> CPLL_SW_CONFIG_SHIFT) & CPLL_SW_CONFIG_MASK;
|
||||
+ u32 cpu_clk = (c1 >> CPLL_CPU_CLK_SHIFT) & CPLL_CPU_CLK_MASK;
|
||||
+
|
||||
+ if (cpu_clk) {
|
||||
+ cpu_rate = 480000000;
|
||||
+ } else if (!swconfig) {
|
||||
+ cpu_rate = 600000000;
|
||||
+ } else {
|
||||
+ u32 m = (c0 >> CPLL_MULT_RATIO_SHIFT) & CPLL_MULT_RATIO;
|
||||
+ u32 d = (c0 >> CPLL_DIV_RATIO_SHIFT) & CPLL_DIV_RATIO;
|
||||
+
|
||||
+ cpu_rate = ((40 * (m + 24)) / mt7620_clk_divider[d]) * 1000000;
|
||||
+ }
|
||||
+
|
||||
+ if (dram_type == SYSCFG0_DRAM_TYPE_SDRAM)
|
||||
+ sys_rate = cpu_rate / 4;
|
||||
+ else
|
||||
+ sys_rate = cpu_rate / 3;
|
||||
+
|
||||
+ ralink_clk_add("cpu", cpu_rate);
|
||||
+ ralink_clk_add("10000100.timer", 40000000);
|
||||
+ ralink_clk_add("10000500.uart", 40000000);
|
||||
+ ralink_clk_add("10000c00.uartlite", 40000000);
|
||||
+}
|
||||
+
|
||||
+void __init ralink_of_remap(void)
|
||||
+{
|
||||
+ rt_sysc_membase = plat_of_remap_node("ralink,mt7620a-sysc");
|
||||
+ rt_memc_membase = plat_of_remap_node("ralink,mt7620a-memc");
|
||||
+
|
||||
+ if (!rt_sysc_membase || !rt_memc_membase)
|
||||
+ panic("Failed to remap core resources");
|
||||
+}
|
||||
+
|
||||
+void prom_soc_init(struct ralink_soc_info *soc_info)
|
||||
+{
|
||||
+ void __iomem *sysc = (void __iomem *) KSEG1ADDR(MT7620_SYSC_BASE);
|
||||
+ unsigned char *name = NULL;
|
||||
+ u32 n0;
|
||||
+ u32 n1;
|
||||
+ u32 rev;
|
||||
+ u32 cfg0;
|
||||
+
|
||||
+ n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0);
|
||||
+ n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1);
|
||||
+
|
||||
+ if (n0 == MT7620N_CHIP_NAME0 && n1 == MT7620N_CHIP_NAME1) {
|
||||
+ name = "MT7620N";
|
||||
+ soc_info->compatible = "ralink,mt7620n-soc";
|
||||
+ } else if (n0 == MT7620A_CHIP_NAME0 && n1 == MT7620A_CHIP_NAME1) {
|
||||
+ name = "MT7620A";
|
||||
+ soc_info->compatible = "ralink,mt7620a-soc";
|
||||
+ } else {
|
||||
+ panic("mt7620: unknown SoC, n0:%08x n1:%08x\n", n0, n1);
|
||||
+ }
|
||||
+
|
||||
+ rev = __raw_readl(sysc + SYSC_REG_CHIP_REV);
|
||||
+
|
||||
+ snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,
|
||||
+ "Ralink %s ver:%u eco:%u",
|
||||
+ name,
|
||||
+ (rev >> CHIP_REV_VER_SHIFT) & CHIP_REV_VER_MASK,
|
||||
+ (rev & CHIP_REV_ECO_MASK));
|
||||
+
|
||||
+ cfg0 = __raw_readl(sysc + SYSC_REG_SYSTEM_CONFIG0);
|
||||
+ dram_type = (cfg0 >> SYSCFG0_DRAM_TYPE_SHIFT) & SYSCFG0_DRAM_TYPE_MASK;
|
||||
+}
|
||||
--
|
||||
1.7.10.4
|
||||
|
||||
|
|
@ -0,0 +1,232 @@
|
|||
From 8a7cac5e324f044f3970d686d79e3489260f6d21 Mon Sep 17 00:00:00 2001
|
||||
From: Gabor Juhos <juhosg@openwrt.org>
|
||||
Date: Wed, 10 Apr 2013 09:19:07 +0200
|
||||
Subject: [PATCH 30/79] MIPS: ralink: add cpu-feature-overrides.h
|
||||
|
||||
Add cpu-feature-overrides.h for RT288x, RT305x and RT3883.
|
||||
|
||||
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
|
||||
Signed-off-by: John Crispin <blogic@openwrt.org>
|
||||
Patchwork: http://patchwork.linux-mips.org/patch/5175/
|
||||
---
|
||||
.../asm/mach-ralink/rt288x/cpu-feature-overrides.h | 56 ++++++++++++++++++++
|
||||
.../asm/mach-ralink/rt305x/cpu-feature-overrides.h | 56 ++++++++++++++++++++
|
||||
.../asm/mach-ralink/rt3883/cpu-feature-overrides.h | 55 +++++++++++++++++++
|
||||
arch/mips/ralink/Platform | 3 ++
|
||||
4 files changed, 170 insertions(+)
|
||||
create mode 100644 arch/mips/include/asm/mach-ralink/rt288x/cpu-feature-overrides.h
|
||||
create mode 100644 arch/mips/include/asm/mach-ralink/rt305x/cpu-feature-overrides.h
|
||||
create mode 100644 arch/mips/include/asm/mach-ralink/rt3883/cpu-feature-overrides.h
|
||||
|
||||
diff --git a/arch/mips/include/asm/mach-ralink/rt288x/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ralink/rt288x/cpu-feature-overrides.h
|
||||
new file mode 100644
|
||||
index 0000000..72fc106
|
||||
--- /dev/null
|
||||
+++ b/arch/mips/include/asm/mach-ralink/rt288x/cpu-feature-overrides.h
|
||||
@@ -0,0 +1,56 @@
|
||||
+/*
|
||||
+ * Ralink RT288x specific CPU feature overrides
|
||||
+ *
|
||||
+ * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
|
||||
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
|
||||
+ *
|
||||
+ * This file was derived from: include/asm-mips/cpu-features.h
|
||||
+ * Copyright (C) 2003, 2004 Ralf Baechle
|
||||
+ * Copyright (C) 2004 Maciej W. Rozycki
|
||||
+ *
|
||||
+ * This program is free software; you can redistribute it and/or modify it
|
||||
+ * under the terms of the GNU General Public License version 2 as published
|
||||
+ * by the Free Software Foundation.
|
||||
+ *
|
||||
+ */
|
||||
+#ifndef _RT288X_CPU_FEATURE_OVERRIDES_H
|
||||
+#define _RT288X_CPU_FEATURE_OVERRIDES_H
|
||||
+
|
||||
+#define cpu_has_tlb 1
|
||||
+#define cpu_has_4kex 1
|
||||
+#define cpu_has_3k_cache 0
|
||||
+#define cpu_has_4k_cache 1
|
||||
+#define cpu_has_tx39_cache 0
|
||||
+#define cpu_has_sb1_cache 0
|
||||
+#define cpu_has_fpu 0
|
||||
+#define cpu_has_32fpr 0
|
||||
+#define cpu_has_counter 1
|
||||
+#define cpu_has_watch 1
|
||||
+#define cpu_has_divec 1
|
||||
+
|
||||
+#define cpu_has_prefetch 1
|
||||
+#define cpu_has_ejtag 1
|
||||
+#define cpu_has_llsc 1
|
||||
+
|
||||
+#define cpu_has_mips16 1
|
||||
+#define cpu_has_mdmx 0
|
||||
+#define cpu_has_mips3d 0
|
||||
+#define cpu_has_smartmips 0
|
||||
+
|
||||
+#define cpu_has_mips32r1 1
|
||||
+#define cpu_has_mips32r2 1
|
||||
+#define cpu_has_mips64r1 0
|
||||
+#define cpu_has_mips64r2 0
|
||||
+
|
||||
+#define cpu_has_dsp 0
|
||||
+#define cpu_has_mipsmt 0
|
||||
+
|
||||
+#define cpu_has_64bits 0
|
||||
+#define cpu_has_64bit_zero_reg 0
|
||||
+#define cpu_has_64bit_gp_regs 0
|
||||
+#define cpu_has_64bit_addresses 0
|
||||
+
|
||||
+#define cpu_dcache_line_size() 16
|
||||
+#define cpu_icache_line_size() 16
|
||||
+
|
||||
+#endif /* _RT288X_CPU_FEATURE_OVERRIDES_H */
|
||||
diff --git a/arch/mips/include/asm/mach-ralink/rt305x/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ralink/rt305x/cpu-feature-overrides.h
|
||||
new file mode 100644
|
||||
index 0000000..917c286
|
||||
--- /dev/null
|
||||
+++ b/arch/mips/include/asm/mach-ralink/rt305x/cpu-feature-overrides.h
|
||||
@@ -0,0 +1,56 @@
|
||||
+/*
|
||||
+ * Ralink RT305x specific CPU feature overrides
|
||||
+ *
|
||||
+ * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
|
||||
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
|
||||
+ *
|
||||
+ * This file was derived from: include/asm-mips/cpu-features.h
|
||||
+ * Copyright (C) 2003, 2004 Ralf Baechle
|
||||
+ * Copyright (C) 2004 Maciej W. Rozycki
|
||||
+ *
|
||||
+ * This program is free software; you can redistribute it and/or modify it
|
||||
+ * under the terms of the GNU General Public License version 2 as published
|
||||
+ * by the Free Software Foundation.
|
||||
+ *
|
||||
+ */
|
||||
+#ifndef _RT305X_CPU_FEATURE_OVERRIDES_H
|
||||
+#define _RT305X_CPU_FEATURE_OVERRIDES_H
|
||||
+
|
||||
+#define cpu_has_tlb 1
|
||||
+#define cpu_has_4kex 1
|
||||
+#define cpu_has_3k_cache 0
|
||||
+#define cpu_has_4k_cache 1
|
||||
+#define cpu_has_tx39_cache 0
|
||||
+#define cpu_has_sb1_cache 0
|
||||
+#define cpu_has_fpu 0
|
||||
+#define cpu_has_32fpr 0
|
||||
+#define cpu_has_counter 1
|
||||
+#define cpu_has_watch 1
|
||||
+#define cpu_has_divec 1
|
||||
+
|
||||
+#define cpu_has_prefetch 1
|
||||
+#define cpu_has_ejtag 1
|
||||
+#define cpu_has_llsc 1
|
||||
+
|
||||
+#define cpu_has_mips16 1
|
||||
+#define cpu_has_mdmx 0
|
||||
+#define cpu_has_mips3d 0
|
||||
+#define cpu_has_smartmips 0
|
||||
+
|
||||
+#define cpu_has_mips32r1 1
|
||||
+#define cpu_has_mips32r2 1
|
||||
+#define cpu_has_mips64r1 0
|
||||
+#define cpu_has_mips64r2 0
|
||||
+
|
||||
+#define cpu_has_dsp 1
|
||||
+#define cpu_has_mipsmt 0
|
||||
+
|
||||
+#define cpu_has_64bits 0
|
||||
+#define cpu_has_64bit_zero_reg 0
|
||||
+#define cpu_has_64bit_gp_regs 0
|
||||
+#define cpu_has_64bit_addresses 0
|
||||
+
|
||||
+#define cpu_dcache_line_size() 32
|
||||
+#define cpu_icache_line_size() 32
|
||||
+
|
||||
+#endif /* _RT305X_CPU_FEATURE_OVERRIDES_H */
|
||||
diff --git a/arch/mips/include/asm/mach-ralink/rt3883/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ralink/rt3883/cpu-feature-overrides.h
|
||||
new file mode 100644
|
||||
index 0000000..181fbf4
|
||||
--- /dev/null
|
||||
+++ b/arch/mips/include/asm/mach-ralink/rt3883/cpu-feature-overrides.h
|
||||
@@ -0,0 +1,55 @@
|
||||
+/*
|
||||
+ * Ralink RT3662/RT3883 specific CPU feature overrides
|
||||
+ *
|
||||
+ * Copyright (C) 2011-2013 Gabor Juhos <juhosg@openwrt.org>
|
||||
+ *
|
||||
+ * This file was derived from: include/asm-mips/cpu-features.h
|
||||
+ * Copyright (C) 2003, 2004 Ralf Baechle
|
||||
+ * Copyright (C) 2004 Maciej W. Rozycki
|
||||
+ *
|
||||
+ * This program is free software; you can redistribute it and/or modify it
|
||||
+ * under the terms of the GNU General Public License version 2 as published
|
||||
+ * by the Free Software Foundation.
|
||||
+ *
|
||||
+ */
|
||||
+#ifndef _RT3883_CPU_FEATURE_OVERRIDES_H
|
||||
+#define _RT3883_CPU_FEATURE_OVERRIDES_H
|
||||
+
|
||||
+#define cpu_has_tlb 1
|
||||
+#define cpu_has_4kex 1
|
||||
+#define cpu_has_3k_cache 0
|
||||
+#define cpu_has_4k_cache 1
|
||||
+#define cpu_has_tx39_cache 0
|
||||
+#define cpu_has_sb1_cache 0
|
||||
+#define cpu_has_fpu 0
|
||||
+#define cpu_has_32fpr 0
|
||||
+#define cpu_has_counter 1
|
||||
+#define cpu_has_watch 1
|
||||
+#define cpu_has_divec 1
|
||||
+
|
||||
+#define cpu_has_prefetch 1
|
||||
+#define cpu_has_ejtag 1
|
||||
+#define cpu_has_llsc 1
|
||||
+
|
||||
+#define cpu_has_mips16 1
|
||||
+#define cpu_has_mdmx 0
|
||||
+#define cpu_has_mips3d 0
|
||||
+#define cpu_has_smartmips 0
|
||||
+
|
||||
+#define cpu_has_mips32r1 1
|
||||
+#define cpu_has_mips32r2 1
|
||||
+#define cpu_has_mips64r1 0
|
||||
+#define cpu_has_mips64r2 0
|
||||
+
|
||||
+#define cpu_has_dsp 1
|
||||
+#define cpu_has_mipsmt 0
|
||||
+
|
||||
+#define cpu_has_64bits 0
|
||||
+#define cpu_has_64bit_zero_reg 0
|
||||
+#define cpu_has_64bit_gp_regs 0
|
||||
+#define cpu_has_64bit_addresses 0
|
||||
+
|
||||
+#define cpu_dcache_line_size() 32
|
||||
+#define cpu_icache_line_size() 32
|
||||
+
|
||||
+#endif /* _RT3883_CPU_FEATURE_OVERRIDES_H */
|
||||
diff --git a/arch/mips/ralink/Platform b/arch/mips/ralink/Platform
|
||||
index b2cbf16..cda4b66 100644
|
||||
--- a/arch/mips/ralink/Platform
|
||||
+++ b/arch/mips/ralink/Platform
|
||||
@@ -8,16 +8,19 @@ cflags-$(CONFIG_RALINK) += -I$(srctree)/arch/mips/include/asm/mach-ralink
|
||||
# Ralink RT288x
|
||||
#
|
||||
load-$(CONFIG_SOC_RT288X) += 0xffffffff88000000
|
||||
+cflags-$(CONFIG_SOC_RT288X) += -I$(srctree)/arch/mips/include/asm/mach-ralink/rt288x
|
||||
|
||||
#
|
||||
# Ralink RT305x
|
||||
#
|
||||
load-$(CONFIG_SOC_RT305X) += 0xffffffff80000000
|
||||
+cflags-$(CONFIG_SOC_RT305X) += -I$(srctree)/arch/mips/include/asm/mach-ralink/rt305x
|
||||
|
||||
#
|
||||
# Ralink RT3883
|
||||
#
|
||||
load-$(CONFIG_SOC_RT3883) += 0xffffffff80000000
|
||||
+cflags-$(CONFIG_SOC_RT3883) += -I$(srctree)/arch/mips/include/asm/mach-ralink/rt3883
|
||||
|
||||
#
|
||||
# Ralink MT7620
|
||||
--
|
||||
1.7.10.4
|
||||
|
||||
|
|
@ -1,7 +1,7 @@
|
|||
From 9377ecb9f1fb5da25a0fbd324e7add7644b1d43d Mon Sep 17 00:00:00 2001
|
||||
From f13cb76f8ad8714eaf691ef24aebfb57f62dab66 Mon Sep 17 00:00:00 2001
|
||||
From: John Crispin <blogic@openwrt.org>
|
||||
Date: Sat, 13 Apr 2013 10:11:51 +0200
|
||||
Subject: [PATCH 115/137] DT: add vendor prefixes for Ralink
|
||||
Subject: [PATCH 31/79] DT: add vendor prefixes for Ralink
|
||||
|
||||
Signed-off-by: John Crispin <blogic@openwrt.org>
|
||||
Acked-by: Grant Likely <grant.likely@secretlab.ca>
|
||||
|
|
@ -9,6 +9,8 @@ Acked-by: Grant Likely <grant.likely@secretlab.ca>
|
|||
Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
|
||||
1 file changed, 1 insertion(+)
|
||||
|
||||
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
|
||||
index 902b1b1..d1cc7bb 100644
|
||||
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
|
||||
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
|
||||
@@ -40,6 +40,7 @@ onnn ON Semiconductor Corp.
|
||||
|
|
@ -19,3 +21,6 @@ Acked-by: Grant Likely <grant.likely@secretlab.ca>
|
|||
ramtron Ramtron International
|
||||
realtek Realtek Semiconductor Corp.
|
||||
samsung Samsung Semiconductor
|
||||
--
|
||||
1.7.10.4
|
||||
|
||||
|
|
@ -0,0 +1,44 @@
|
|||
From 441d0189a47391c6882bbc6a11494e7cd394f1fc Mon Sep 17 00:00:00 2001
|
||||
From: Gabor Juhos <juhosg@openwrt.org>
|
||||
Date: Sat, 13 Apr 2013 09:02:40 +0200
|
||||
Subject: [PATCH 32/79] DT: add documentation for the Ralink MIPS SoCs
|
||||
|
||||
This patch adds binding documentation for the
|
||||
compatible values of the Ralink MIPS SoCs.
|
||||
|
||||
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
|
||||
Signed-off-by: John Crispin <blogic@openwrt.org>
|
||||
Acked-by: Grant Likely <grant.likely@secretlab.ca>
|
||||
Patchwork: http://patchwork.linux-mips.org/patch/5187/
|
||||
---
|
||||
Documentation/devicetree/bindings/mips/ralink.txt | 18 ++++++++++++++++++
|
||||
1 file changed, 18 insertions(+)
|
||||
create mode 100644 Documentation/devicetree/bindings/mips/ralink.txt
|
||||
|
||||
diff --git a/Documentation/devicetree/bindings/mips/ralink.txt b/Documentation/devicetree/bindings/mips/ralink.txt
|
||||
new file mode 100644
|
||||
index 0000000..59b6a35
|
||||
--- /dev/null
|
||||
+++ b/Documentation/devicetree/bindings/mips/ralink.txt
|
||||
@@ -0,0 +1,18 @@
|
||||
+Ralink MIPS SoC device tree bindings
|
||||
+
|
||||
+1. SoCs
|
||||
+
|
||||
+Each device tree must specify a compatible value for the Ralink SoC
|
||||
+it uses in the compatible property of the root node. The compatible
|
||||
+value must be one of the following values:
|
||||
+
|
||||
+ ralink,rt2880-soc
|
||||
+ ralink,rt3050-soc
|
||||
+ ralink,rt3052-soc
|
||||
+ ralink,rt3350-soc
|
||||
+ ralink,rt3352-soc
|
||||
+ ralink,rt3883-soc
|
||||
+ ralink,rt5350-soc
|
||||
+ ralink,mt7620a-soc
|
||||
+ ralink,mt7620n-soc
|
||||
+
|
||||
--
|
||||
1.7.10.4
|
||||
|
||||
|
|
@ -0,0 +1,139 @@
|
|||
From 29d1bb6fc97d4391e4ecf96298b6ac42d0daefca Mon Sep 17 00:00:00 2001
|
||||
From: John Crispin <blogic@openwrt.org>
|
||||
Date: Thu, 20 Jun 2013 18:44:43 +0200
|
||||
Subject: [PATCH 33/79] DT: MIPS: ralink: clean up RT3050 dtsi and dts file
|
||||
|
||||
* remove nodes for cores whose drivers are not upstream yet
|
||||
* add compat string for an additional soc
|
||||
* fix a whitespace error
|
||||
|
||||
Signed-off-by: John Crispin <blogic@openwrt.org>
|
||||
Acked-by: Grant Likely <grant.likely@secretlab.ca>
|
||||
Patchwork: http://patchwork.linux-mips.org/patch/5186/
|
||||
---
|
||||
arch/mips/ralink/dts/rt3050.dtsi | 52 ++--------------------------------
|
||||
arch/mips/ralink/dts/rt3052_eval.dts | 10 ++-----
|
||||
2 files changed, 4 insertions(+), 58 deletions(-)
|
||||
|
||||
diff --git a/arch/mips/ralink/dts/rt3050.dtsi b/arch/mips/ralink/dts/rt3050.dtsi
|
||||
index 069d066..ef7da1e 100644
|
||||
--- a/arch/mips/ralink/dts/rt3050.dtsi
|
||||
+++ b/arch/mips/ralink/dts/rt3050.dtsi
|
||||
@@ -1,7 +1,7 @@
|
||||
/ {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
- compatible = "ralink,rt3050-soc", "ralink,rt3052-soc";
|
||||
+ compatible = "ralink,rt3050-soc", "ralink,rt3052-soc", "ralink,rt3350-soc";
|
||||
|
||||
cpus {
|
||||
cpu@0 {
|
||||
@@ -9,10 +9,6 @@
|
||||
};
|
||||
};
|
||||
|
||||
- chosen {
|
||||
- bootargs = "console=ttyS0,57600 init=/init";
|
||||
- };
|
||||
-
|
||||
cpuintc: cpuintc@0 {
|
||||
#address-cells = <0>;
|
||||
#interrupt-cells = <1>;
|
||||
@@ -23,7 +19,7 @@
|
||||
palmbus@10000000 {
|
||||
compatible = "palmbus";
|
||||
reg = <0x10000000 0x200000>;
|
||||
- ranges = <0x0 0x10000000 0x1FFFFF>;
|
||||
+ ranges = <0x0 0x10000000 0x1FFFFF>;
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
@@ -33,11 +29,6 @@
|
||||
reg = <0x0 0x100>;
|
||||
};
|
||||
|
||||
- timer@100 {
|
||||
- compatible = "ralink,rt3052-wdt", "ralink,rt2880-wdt";
|
||||
- reg = <0x100 0x100>;
|
||||
- };
|
||||
-
|
||||
intc: intc@200 {
|
||||
compatible = "ralink,rt3052-intc", "ralink,rt2880-intc";
|
||||
reg = <0x200 0x100>;
|
||||
@@ -54,45 +45,6 @@
|
||||
reg = <0x300 0x100>;
|
||||
};
|
||||
|
||||
- gpio0: gpio@600 {
|
||||
- compatible = "ralink,rt3052-gpio", "ralink,rt2880-gpio";
|
||||
- reg = <0x600 0x34>;
|
||||
-
|
||||
- gpio-controller;
|
||||
- #gpio-cells = <2>;
|
||||
-
|
||||
- ralink,ngpio = <24>;
|
||||
- ralink,regs = [ 00 04 08 0c
|
||||
- 20 24 28 2c
|
||||
- 30 34 ];
|
||||
- };
|
||||
-
|
||||
- gpio1: gpio@638 {
|
||||
- compatible = "ralink,rt3052-gpio", "ralink,rt2880-gpio";
|
||||
- reg = <0x638 0x24>;
|
||||
-
|
||||
- gpio-controller;
|
||||
- #gpio-cells = <2>;
|
||||
-
|
||||
- ralink,ngpio = <16>;
|
||||
- ralink,regs = [ 00 04 08 0c
|
||||
- 10 14 18 1c
|
||||
- 20 24 ];
|
||||
- };
|
||||
-
|
||||
- gpio2: gpio@660 {
|
||||
- compatible = "ralink,rt3052-gpio", "ralink,rt2880-gpio";
|
||||
- reg = <0x660 0x24>;
|
||||
-
|
||||
- gpio-controller;
|
||||
- #gpio-cells = <2>;
|
||||
-
|
||||
- ralink,ngpio = <12>;
|
||||
- ralink,regs = [ 00 04 08 0c
|
||||
- 10 14 18 1c
|
||||
- 20 24 ];
|
||||
- };
|
||||
-
|
||||
uartlite@c00 {
|
||||
compatible = "ralink,rt3052-uart", "ralink,rt2880-uart", "ns16550a";
|
||||
reg = <0xc00 0x100>;
|
||||
diff --git a/arch/mips/ralink/dts/rt3052_eval.dts b/arch/mips/ralink/dts/rt3052_eval.dts
|
||||
index dc56e58..df17f5f 100644
|
||||
--- a/arch/mips/ralink/dts/rt3052_eval.dts
|
||||
+++ b/arch/mips/ralink/dts/rt3052_eval.dts
|
||||
@@ -3,8 +3,6 @@
|
||||
/include/ "rt3050.dtsi"
|
||||
|
||||
/ {
|
||||
- #address-cells = <1>;
|
||||
- #size-cells = <1>;
|
||||
compatible = "ralink,rt3052-eval-board", "ralink,rt3052-soc";
|
||||
model = "Ralink RT3052 evaluation board";
|
||||
|
||||
@@ -12,12 +10,8 @@
|
||||
reg = <0x0 0x2000000>;
|
||||
};
|
||||
|
||||
- palmbus@10000000 {
|
||||
- sysc@0 {
|
||||
- ralink,pinmux = "uartlite", "spi";
|
||||
- ralink,uartmux = "gpio";
|
||||
- ralink,wdtmux = <0>;
|
||||
- };
|
||||
+ chosen {
|
||||
+ bootargs = "console=ttyS0,57600";
|
||||
};
|
||||
|
||||
cfi@1f000000 {
|
||||
--
|
||||
1.7.10.4
|
||||
|
||||
|
|
@ -1,7 +1,7 @@
|
|||
From b39e659770cb71939765de8c9e73c0a0cfa832db Mon Sep 17 00:00:00 2001
|
||||
From b3cda181b5f9986b05bd95ee322504a8f2ed0b69 Mon Sep 17 00:00:00 2001
|
||||
From: John Crispin <blogic@openwrt.org>
|
||||
Date: Fri, 12 Apr 2013 06:27:37 +0000
|
||||
Subject: [PATCH 118/137] DT: MIPS: ralink: add RT2880 dts files
|
||||
Subject: [PATCH 34/79] DT: MIPS: ralink: add RT2880 dts files
|
||||
|
||||
Add a dtsi file for RT2880 SoC and a sample dts file.
|
||||
|
||||
|
|
@ -17,6 +17,8 @@ Patchwork: http://patchwork.linux-mips.org/patch/5188/
|
|||
create mode 100644 arch/mips/ralink/dts/rt2880.dtsi
|
||||
create mode 100644 arch/mips/ralink/dts/rt2880_eval.dts
|
||||
|
||||
diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
|
||||
index 86f6c77..2f6fbb8 100644
|
||||
--- a/arch/mips/ralink/Kconfig
|
||||
+++ b/arch/mips/ralink/Kconfig
|
||||
@@ -34,6 +34,10 @@ choice
|
||||
|
|
@ -30,11 +32,16 @@ Patchwork: http://patchwork.linux-mips.org/patch/5188/
|
|||
config DTB_RT305X_EVAL
|
||||
bool "RT305x eval kit"
|
||||
depends on SOC_RT305X
|
||||
diff --git a/arch/mips/ralink/dts/Makefile b/arch/mips/ralink/dts/Makefile
|
||||
index 1a69fb3..f635a01 100644
|
||||
--- a/arch/mips/ralink/dts/Makefile
|
||||
+++ b/arch/mips/ralink/dts/Makefile
|
||||
@@ -1 +1,2 @@
|
||||
+obj-$(CONFIG_DTB_RT2880_EVAL) := rt2880_eval.dtb.o
|
||||
obj-$(CONFIG_DTB_RT305X_EVAL) := rt3052_eval.dtb.o
|
||||
diff --git a/arch/mips/ralink/dts/rt2880.dtsi b/arch/mips/ralink/dts/rt2880.dtsi
|
||||
new file mode 100644
|
||||
index 0000000..182afde
|
||||
--- /dev/null
|
||||
+++ b/arch/mips/ralink/dts/rt2880.dtsi
|
||||
@@ -0,0 +1,58 @@
|
||||
|
|
@ -96,6 +103,9 @@ Patchwork: http://patchwork.linux-mips.org/patch/5188/
|
|||
+ };
|
||||
+ };
|
||||
+};
|
||||
diff --git a/arch/mips/ralink/dts/rt2880_eval.dts b/arch/mips/ralink/dts/rt2880_eval.dts
|
||||
new file mode 100644
|
||||
index 0000000..322d700
|
||||
--- /dev/null
|
||||
+++ b/arch/mips/ralink/dts/rt2880_eval.dts
|
||||
@@ -0,0 +1,46 @@
|
||||
|
|
@ -145,3 +155,6 @@ Patchwork: http://patchwork.linux-mips.org/patch/5188/
|
|||
+ };
|
||||
+ };
|
||||
+};
|
||||
--
|
||||
1.7.10.4
|
||||
|
||||
|
|
@ -1,7 +1,7 @@
|
|||
From 8b02459b5aa171dc8726698c4b19341a4e441bb8 Mon Sep 17 00:00:00 2001
|
||||
From d702c2e334db0a75298654b12755fd5879dd29df Mon Sep 17 00:00:00 2001
|
||||
From: John Crispin <blogic@openwrt.org>
|
||||
Date: Fri, 12 Apr 2013 06:27:39 +0000
|
||||
Subject: [PATCH 119/137] DT: MIPS: ralink: add RT3883 dts files
|
||||
Subject: [PATCH 35/79] DT: MIPS: ralink: add RT3883 dts files
|
||||
|
||||
Add a dtsi file for RT3883 SoC and a sample dts file.
|
||||
|
||||
|
|
@ -17,6 +17,8 @@ Patchwork: http://patchwork.linux-mips.org/patch/5189/
|
|||
create mode 100644 arch/mips/ralink/dts/rt3883.dtsi
|
||||
create mode 100644 arch/mips/ralink/dts/rt3883_eval.dts
|
||||
|
||||
diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
|
||||
index 2f6fbb8..493411f 100644
|
||||
--- a/arch/mips/ralink/Kconfig
|
||||
+++ b/arch/mips/ralink/Kconfig
|
||||
@@ -42,6 +42,10 @@ choice
|
||||
|
|
@ -30,12 +32,17 @@ Patchwork: http://patchwork.linux-mips.org/patch/5189/
|
|||
endchoice
|
||||
|
||||
endif
|
||||
diff --git a/arch/mips/ralink/dts/Makefile b/arch/mips/ralink/dts/Makefile
|
||||
index f635a01..040a986 100644
|
||||
--- a/arch/mips/ralink/dts/Makefile
|
||||
+++ b/arch/mips/ralink/dts/Makefile
|
||||
@@ -1,2 +1,3 @@
|
||||
obj-$(CONFIG_DTB_RT2880_EVAL) := rt2880_eval.dtb.o
|
||||
obj-$(CONFIG_DTB_RT305X_EVAL) := rt3052_eval.dtb.o
|
||||
+obj-$(CONFIG_DTB_RT3883_EVAL) := rt3883_eval.dtb.o
|
||||
diff --git a/arch/mips/ralink/dts/rt3883.dtsi b/arch/mips/ralink/dts/rt3883.dtsi
|
||||
new file mode 100644
|
||||
index 0000000..3b131dd
|
||||
--- /dev/null
|
||||
+++ b/arch/mips/ralink/dts/rt3883.dtsi
|
||||
@@ -0,0 +1,58 @@
|
||||
|
|
@ -97,6 +104,9 @@ Patchwork: http://patchwork.linux-mips.org/patch/5189/
|
|||
+ };
|
||||
+ };
|
||||
+};
|
||||
diff --git a/arch/mips/ralink/dts/rt3883_eval.dts b/arch/mips/ralink/dts/rt3883_eval.dts
|
||||
new file mode 100644
|
||||
index 0000000..2fa6b33
|
||||
--- /dev/null
|
||||
+++ b/arch/mips/ralink/dts/rt3883_eval.dts
|
||||
@@ -0,0 +1,16 @@
|
||||
|
|
@ -116,3 +126,6 @@ Patchwork: http://patchwork.linux-mips.org/patch/5189/
|
|||
+ bootargs = "console=ttyS0,57600";
|
||||
+ };
|
||||
+};
|
||||
--
|
||||
1.7.10.4
|
||||
|
||||
|
|
@ -1,7 +1,7 @@
|
|||
From 07741f61fc94fad3c3d21fa1a2ad6f01455cc1dd Mon Sep 17 00:00:00 2001
|
||||
From 0757f88781dca6b29de4e1578a4900715371a926 Mon Sep 17 00:00:00 2001
|
||||
From: John Crispin <blogic@openwrt.org>
|
||||
Date: Fri, 12 Apr 2013 06:27:41 +0000
|
||||
Subject: [PATCH 120/137] DT: MIPS: ralink: add MT7620A dts files
|
||||
Subject: [PATCH 36/79] DT: MIPS: ralink: add MT7620A dts files
|
||||
|
||||
Add a dtsi file for MT7620A SoC and a sample dts file.
|
||||
|
||||
|
|
@ -17,6 +17,8 @@ Patchwork: http://patchwork.linux-mips.org/patch/5190/
|
|||
create mode 100644 arch/mips/ralink/dts/mt7620a.dtsi
|
||||
create mode 100644 arch/mips/ralink/dts/mt7620a_eval.dts
|
||||
|
||||
diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
|
||||
index 493411f..026e823 100644
|
||||
--- a/arch/mips/ralink/Kconfig
|
||||
+++ b/arch/mips/ralink/Kconfig
|
||||
@@ -46,6 +46,10 @@ choice
|
||||
|
|
@ -30,6 +32,8 @@ Patchwork: http://patchwork.linux-mips.org/patch/5190/
|
|||
endchoice
|
||||
|
||||
endif
|
||||
diff --git a/arch/mips/ralink/dts/Makefile b/arch/mips/ralink/dts/Makefile
|
||||
index 040a986..18194fa 100644
|
||||
--- a/arch/mips/ralink/dts/Makefile
|
||||
+++ b/arch/mips/ralink/dts/Makefile
|
||||
@@ -1,3 +1,4 @@
|
||||
|
|
@ -37,6 +41,9 @@ Patchwork: http://patchwork.linux-mips.org/patch/5190/
|
|||
obj-$(CONFIG_DTB_RT305X_EVAL) := rt3052_eval.dtb.o
|
||||
obj-$(CONFIG_DTB_RT3883_EVAL) := rt3883_eval.dtb.o
|
||||
+obj-$(CONFIG_DTB_MT7620A_EVAL) := mt7620a_eval.dtb.o
|
||||
diff --git a/arch/mips/ralink/dts/mt7620a.dtsi b/arch/mips/ralink/dts/mt7620a.dtsi
|
||||
new file mode 100644
|
||||
index 0000000..08bf24f
|
||||
--- /dev/null
|
||||
+++ b/arch/mips/ralink/dts/mt7620a.dtsi
|
||||
@@ -0,0 +1,58 @@
|
||||
|
|
@ -98,6 +105,9 @@ Patchwork: http://patchwork.linux-mips.org/patch/5190/
|
|||
+ };
|
||||
+ };
|
||||
+};
|
||||
diff --git a/arch/mips/ralink/dts/mt7620a_eval.dts b/arch/mips/ralink/dts/mt7620a_eval.dts
|
||||
new file mode 100644
|
||||
index 0000000..35eb874
|
||||
--- /dev/null
|
||||
+++ b/arch/mips/ralink/dts/mt7620a_eval.dts
|
||||
@@ -0,0 +1,16 @@
|
||||
|
|
@ -117,3 +127,6 @@ Patchwork: http://patchwork.linux-mips.org/patch/5190/
|
|||
+ bootargs = "console=ttyS0,57600";
|
||||
+ };
|
||||
+};
|
||||
--
|
||||
1.7.10.4
|
||||
|
||||
|
|
@ -1,7 +1,7 @@
|
|||
From 9041c96ab5bd29d85ca95cffa44c755f68ae6bb1 Mon Sep 17 00:00:00 2001
|
||||
From 3350a0d29bc3f3d15b50835a20ffcc14a458e2d9 Mon Sep 17 00:00:00 2001
|
||||
From: John Crispin <blogic@openwrt.org>
|
||||
Date: Sat, 13 Apr 2013 13:15:47 +0200
|
||||
Subject: [PATCH 121/137] MIPS: add detect_memory_region()
|
||||
Subject: [PATCH 37/79] MIPS: add detect_memory_region()
|
||||
|
||||
Add a generic way of detecting the available RAM. This function is based on the
|
||||
implementation already used by ath79.
|
||||
|
|
@ -13,6 +13,8 @@ Patchwork: http://patchwork.linux-mips.org/patch/5178/
|
|||
arch/mips/kernel/setup.c | 20 ++++++++++++++++++++
|
||||
2 files changed, 21 insertions(+)
|
||||
|
||||
diff --git a/arch/mips/include/asm/bootinfo.h b/arch/mips/include/asm/bootinfo.h
|
||||
index 7a51d87..6d6cfac 100644
|
||||
--- a/arch/mips/include/asm/bootinfo.h
|
||||
+++ b/arch/mips/include/asm/bootinfo.h
|
||||
@@ -104,6 +104,7 @@ struct boot_mem_map {
|
||||
|
|
@ -23,6 +25,8 @@ Patchwork: http://patchwork.linux-mips.org/patch/5178/
|
|||
|
||||
extern void prom_init(void);
|
||||
extern void prom_free_prom_memory(void);
|
||||
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
|
||||
index 8c41187..3937630 100644
|
||||
--- a/arch/mips/kernel/setup.c
|
||||
+++ b/arch/mips/kernel/setup.c
|
||||
@@ -23,6 +23,7 @@
|
||||
|
|
@ -33,7 +37,7 @@ Patchwork: http://patchwork.linux-mips.org/patch/5178/
|
|||
|
||||
#include <asm/addrspace.h>
|
||||
#include <asm/bootinfo.h>
|
||||
@@ -122,6 +123,25 @@ void __init add_memory_region(phys_t sta
|
||||
@@ -122,6 +123,25 @@ void __init add_memory_region(phys_t start, phys_t size, long type)
|
||||
boot_mem_map.nr_map++;
|
||||
}
|
||||
|
||||
|
|
@ -59,3 +63,6 @@ Patchwork: http://patchwork.linux-mips.org/patch/5178/
|
|||
static void __init print_memory_map(void)
|
||||
{
|
||||
int i;
|
||||
--
|
||||
1.7.10.4
|
||||
|
||||
|
|
@ -0,0 +1,34 @@
|
|||
From cfad83f59816f2be69a22955a398906d749ab108 Mon Sep 17 00:00:00 2001
|
||||
From: John Crispin <blogic@openwrt.org>
|
||||
Date: Sat, 13 Apr 2013 15:10:14 +0200
|
||||
Subject: [PATCH 38/79] MIPS: ralink: add memory definition to struct
|
||||
ralink_soc_info
|
||||
|
||||
Depending on the actual SoC we have a different base address as well as minimum
|
||||
and maximum size for RAM. Add these fields to the per SoC structure.
|
||||
|
||||
Signed-off-by: John Crispin <blogic@openwrt.org>
|
||||
Patchwork: http://patchwork.linux-mips.org/patch/5179/
|
||||
---
|
||||
arch/mips/ralink/common.h | 5 +++++
|
||||
1 file changed, 5 insertions(+)
|
||||
|
||||
diff --git a/arch/mips/ralink/common.h b/arch/mips/ralink/common.h
|
||||
index 299119b..83144c3 100644
|
||||
--- a/arch/mips/ralink/common.h
|
||||
+++ b/arch/mips/ralink/common.h
|
||||
@@ -33,6 +33,11 @@ extern struct ralink_pinmux rt_gpio_pinmux;
|
||||
struct ralink_soc_info {
|
||||
unsigned char sys_type[RAMIPS_SYS_TYPE_LEN];
|
||||
unsigned char *compatible;
|
||||
+
|
||||
+ unsigned long mem_base;
|
||||
+ unsigned long mem_size;
|
||||
+ unsigned long mem_size_min;
|
||||
+ unsigned long mem_size_max;
|
||||
};
|
||||
extern struct ralink_soc_info soc_info;
|
||||
|
||||
--
|
||||
1.7.10.4
|
||||
|
||||
|
|
@ -0,0 +1,96 @@
|
|||
From 7d0aa01494353532bbdc644469ef2a06ee089f3e Mon Sep 17 00:00:00 2001
|
||||
From: John Crispin <blogic@openwrt.org>
|
||||
Date: Sat, 13 Apr 2013 15:13:40 +0200
|
||||
Subject: [PATCH 39/79] MIPS: ralink: add memory definition for RT305x
|
||||
|
||||
Populate struct soc_info with the data that describes our RAM window.
|
||||
|
||||
As memory detection fails on RT5350 we read the amount of available memory
|
||||
from the system controller.
|
||||
|
||||
Signed-off-by: John Crispin <blogic@openwrt.org>
|
||||
Patchwork: http://patchwork.linux-mips.org/patch/5180/
|
||||
---
|
||||
arch/mips/include/asm/mach-ralink/rt305x.h | 6 ++++
|
||||
arch/mips/ralink/rt305x.c | 45 ++++++++++++++++++++++++++++
|
||||
2 files changed, 51 insertions(+)
|
||||
|
||||
diff --git a/arch/mips/include/asm/mach-ralink/rt305x.h b/arch/mips/include/asm/mach-ralink/rt305x.h
|
||||
index 80cda8a..069bf37 100644
|
||||
--- a/arch/mips/include/asm/mach-ralink/rt305x.h
|
||||
+++ b/arch/mips/include/asm/mach-ralink/rt305x.h
|
||||
@@ -157,4 +157,10 @@ static inline int soc_is_rt5350(void)
|
||||
#define RT3352_RSTCTRL_UDEV BIT(25)
|
||||
#define RT3352_SYSCFG1_USB0_HOST_MODE BIT(10)
|
||||
|
||||
+#define RT305X_SDRAM_BASE 0x00000000
|
||||
+#define RT305X_MEM_SIZE_MIN 2
|
||||
+#define RT305X_MEM_SIZE_MAX 64
|
||||
+#define RT3352_MEM_SIZE_MIN 2
|
||||
+#define RT3352_MEM_SIZE_MAX 256
|
||||
+
|
||||
#endif
|
||||
diff --git a/arch/mips/ralink/rt305x.c b/arch/mips/ralink/rt305x.c
|
||||
index 6aa3cb1..ca7ee3a 100644
|
||||
--- a/arch/mips/ralink/rt305x.c
|
||||
+++ b/arch/mips/ralink/rt305x.c
|
||||
@@ -122,6 +122,40 @@ struct ralink_pinmux rt_gpio_pinmux = {
|
||||
.wdt_reset = rt305x_wdt_reset,
|
||||
};
|
||||
|
||||
+static unsigned long rt5350_get_mem_size(void)
|
||||
+{
|
||||
+ void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT305X_SYSC_BASE);
|
||||
+ unsigned long ret;
|
||||
+ u32 t;
|
||||
+
|
||||
+ t = __raw_readl(sysc + SYSC_REG_SYSTEM_CONFIG);
|
||||
+ t = (t >> RT5350_SYSCFG0_DRAM_SIZE_SHIFT) &
|
||||
+ RT5350_SYSCFG0_DRAM_SIZE_MASK;
|
||||
+
|
||||
+ switch (t) {
|
||||
+ case RT5350_SYSCFG0_DRAM_SIZE_2M:
|
||||
+ ret = 2;
|
||||
+ break;
|
||||
+ case RT5350_SYSCFG0_DRAM_SIZE_8M:
|
||||
+ ret = 8;
|
||||
+ break;
|
||||
+ case RT5350_SYSCFG0_DRAM_SIZE_16M:
|
||||
+ ret = 16;
|
||||
+ break;
|
||||
+ case RT5350_SYSCFG0_DRAM_SIZE_32M:
|
||||
+ ret = 32;
|
||||
+ break;
|
||||
+ case RT5350_SYSCFG0_DRAM_SIZE_64M:
|
||||
+ ret = 64;
|
||||
+ break;
|
||||
+ default:
|
||||
+ panic("rt5350: invalid DRAM size: %u", t);
|
||||
+ break;
|
||||
+ }
|
||||
+
|
||||
+ return ret;
|
||||
+}
|
||||
+
|
||||
void __init ralink_clk_init(void)
|
||||
{
|
||||
unsigned long cpu_rate, sys_rate, wdt_rate, uart_rate;
|
||||
@@ -252,4 +286,15 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
|
||||
name,
|
||||
(id >> CHIP_ID_ID_SHIFT) & CHIP_ID_ID_MASK,
|
||||
(id & CHIP_ID_REV_MASK));
|
||||
+
|
||||
+ soc_info->mem_base = RT305X_SDRAM_BASE;
|
||||
+ if (soc_is_rt5350()) {
|
||||
+ soc_info->mem_size = rt5350_get_mem_size();
|
||||
+ } else if (soc_is_rt305x() || soc_is_rt3350()) {
|
||||
+ soc_info->mem_size_min = RT305X_MEM_SIZE_MIN;
|
||||
+ soc_info->mem_size_max = RT305X_MEM_SIZE_MAX;
|
||||
+ } else if (soc_is_rt3352()) {
|
||||
+ soc_info->mem_size_min = RT3352_MEM_SIZE_MIN;
|
||||
+ soc_info->mem_size_max = RT3352_MEM_SIZE_MAX;
|
||||
+ }
|
||||
}
|
||||
--
|
||||
1.7.10.4
|
||||
|
||||
|
|
@ -0,0 +1,43 @@
|
|||
From 1ca89d8a262f27f4ecd45d40b6774c415842421a Mon Sep 17 00:00:00 2001
|
||||
From: John Crispin <blogic@openwrt.org>
|
||||
Date: Sat, 13 Apr 2013 15:37:37 +0200
|
||||
Subject: [PATCH 40/79] MIPS: ralink: add memory definition for RT2880
|
||||
|
||||
Populate struct soc_info with the data that describes our RAM window.
|
||||
|
||||
Signed-off-by: John Crispin <blogic@openwrt.org>
|
||||
Patchwork: http://patchwork.linux-mips.org/patch/5181/
|
||||
---
|
||||
arch/mips/include/asm/mach-ralink/rt288x.h | 4 ++++
|
||||
arch/mips/ralink/rt288x.c | 4 ++++
|
||||
2 files changed, 8 insertions(+)
|
||||
|
||||
diff --git a/arch/mips/include/asm/mach-ralink/rt288x.h b/arch/mips/include/asm/mach-ralink/rt288x.h
|
||||
index ad8b42d..03ad716 100644
|
||||
--- a/arch/mips/include/asm/mach-ralink/rt288x.h
|
||||
+++ b/arch/mips/include/asm/mach-ralink/rt288x.h
|
||||
@@ -46,4 +46,8 @@
|
||||
|
||||
#define CLKCFG_SRAM_CS_N_WDT BIT(9)
|
||||
|
||||
+#define RT2880_SDRAM_BASE 0x08000000
|
||||
+#define RT2880_MEM_SIZE_MIN 2
|
||||
+#define RT2880_MEM_SIZE_MAX 128
|
||||
+
|
||||
#endif
|
||||
diff --git a/arch/mips/ralink/rt288x.c b/arch/mips/ralink/rt288x.c
|
||||
index 1e0788e..f87de1a 100644
|
||||
--- a/arch/mips/ralink/rt288x.c
|
||||
+++ b/arch/mips/ralink/rt288x.c
|
||||
@@ -136,4 +136,8 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
|
||||
name,
|
||||
(id >> CHIP_ID_ID_SHIFT) & CHIP_ID_ID_MASK,
|
||||
(id & CHIP_ID_REV_MASK));
|
||||
+
|
||||
+ soc_info->mem_base = RT2880_SDRAM_BASE;
|
||||
+ soc_info->mem_size_min = RT2880_MEM_SIZE_MIN;
|
||||
+ soc_info->mem_size_max = RT2880_MEM_SIZE_MAX;
|
||||
}
|
||||
--
|
||||
1.7.10.4
|
||||
|
||||
|
|
@ -0,0 +1,51 @@
|
|||
From 42a816a8312734e6b438e799378044365e229a07 Mon Sep 17 00:00:00 2001
|
||||
From: John Crispin <blogic@openwrt.org>
|
||||
Date: Sat, 13 Apr 2013 20:23:19 +0200
|
||||
Subject: [PATCH 41/79] MIPS: ralink: add memory definition for RT3883
|
||||
|
||||
Populate struct soc_info with the data that describes our RAM window.
|
||||
|
||||
Signed-off-by: John Crispin <blogic@openwrt.org>
|
||||
Patchwork: http://patchwork.linux-mips.org/patch/5182/
|
||||
---
|
||||
arch/mips/include/asm/mach-ralink/rt3883.h | 5 +++++
|
||||
arch/mips/ralink/rt3883.c | 4 ++++
|
||||
2 files changed, 9 insertions(+)
|
||||
|
||||
diff --git a/arch/mips/include/asm/mach-ralink/rt3883.h b/arch/mips/include/asm/mach-ralink/rt3883.h
|
||||
index b91c6c1..058382f 100644
|
||||
--- a/arch/mips/include/asm/mach-ralink/rt3883.h
|
||||
+++ b/arch/mips/include/asm/mach-ralink/rt3883.h
|
||||
@@ -152,6 +152,7 @@
|
||||
#define RT3883_GPIO_SPI_MISO 6
|
||||
#define RT3883_GPIO_7 7
|
||||
#define RT3883_GPIO_10 10
|
||||
+#define RT3883_GPIO_11 11
|
||||
#define RT3883_GPIO_14 14
|
||||
#define RT3883_GPIO_UART1_TXD 15
|
||||
#define RT3883_GPIO_UART1_RXD 16
|
||||
@@ -244,4 +245,8 @@
|
||||
#define RT3883_FLASH_CFG_WIDTH_16BIT 0x1
|
||||
#define RT3883_FLASH_CFG_WIDTH_32BIT 0x2
|
||||
|
||||
+#define RT3883_SDRAM_BASE 0x00000000
|
||||
+#define RT3883_MEM_SIZE_MIN 2
|
||||
+#define RT3883_MEM_SIZE_MAX 256
|
||||
+
|
||||
#endif /* _RT3883_REGS_H_ */
|
||||
diff --git a/arch/mips/ralink/rt3883.c b/arch/mips/ralink/rt3883.c
|
||||
index 2d90aa9..afbf2ce 100644
|
||||
--- a/arch/mips/ralink/rt3883.c
|
||||
+++ b/arch/mips/ralink/rt3883.c
|
||||
@@ -239,4 +239,8 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
|
||||
name,
|
||||
(id >> RT3883_REVID_VER_ID_SHIFT) & RT3883_REVID_VER_ID_MASK,
|
||||
(id & RT3883_REVID_ECO_ID_MASK));
|
||||
+
|
||||
+ soc_info->mem_base = RT3883_SDRAM_BASE;
|
||||
+ soc_info->mem_size_min = RT3883_MEM_SIZE_MIN;
|
||||
+ soc_info->mem_size_max = RT3883_MEM_SIZE_MAX;
|
||||
}
|
||||
--
|
||||
1.7.10.4
|
||||
|
||||
|
|
@ -0,0 +1,65 @@
|
|||
From e7dfbb1eafed754442099a33492a9e90fa33d3fa Mon Sep 17 00:00:00 2001
|
||||
From: John Crispin <blogic@openwrt.org>
|
||||
Date: Sun, 14 Apr 2013 09:55:29 +0200
|
||||
Subject: [PATCH 42/79] MIPS: ralink: add memory definition for MT7620
|
||||
|
||||
Populate struct soc_info with the data that describes our RAM window.
|
||||
|
||||
Signed-off-by: John Crispin <blogic@openwrt.org>
|
||||
Patchwork: http://patchwork.linux-mips.org/patch/5183/
|
||||
---
|
||||
arch/mips/include/asm/mach-ralink/mt7620.h | 8 ++++++++
|
||||
arch/mips/ralink/mt7620.c | 20 ++++++++++++++++++++
|
||||
2 files changed, 28 insertions(+)
|
||||
|
||||
diff --git a/arch/mips/include/asm/mach-ralink/mt7620.h b/arch/mips/include/asm/mach-ralink/mt7620.h
|
||||
index b272649..9809972 100644
|
||||
--- a/arch/mips/include/asm/mach-ralink/mt7620.h
|
||||
+++ b/arch/mips/include/asm/mach-ralink/mt7620.h
|
||||
@@ -50,6 +50,14 @@
|
||||
#define SYSCFG0_DRAM_TYPE_DDR1 1
|
||||
#define SYSCFG0_DRAM_TYPE_DDR2 2
|
||||
|
||||
+#define MT7620_DRAM_BASE 0x0
|
||||
+#define MT7620_SDRAM_SIZE_MIN 2
|
||||
+#define MT7620_SDRAM_SIZE_MAX 64
|
||||
+#define MT7620_DDR1_SIZE_MIN 32
|
||||
+#define MT7620_DDR1_SIZE_MAX 128
|
||||
+#define MT7620_DDR2_SIZE_MIN 32
|
||||
+#define MT7620_DDR2_SIZE_MAX 256
|
||||
+
|
||||
#define MT7620_GPIO_MODE_I2C BIT(0)
|
||||
#define MT7620_GPIO_MODE_UART0_SHIFT 2
|
||||
#define MT7620_GPIO_MODE_UART0_MASK 0x7
|
||||
diff --git a/arch/mips/ralink/mt7620.c b/arch/mips/ralink/mt7620.c
|
||||
index eb00ab8..98ddb93 100644
|
||||
--- a/arch/mips/ralink/mt7620.c
|
||||
+++ b/arch/mips/ralink/mt7620.c
|
||||
@@ -211,4 +211,24 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
|
||||
|
||||
cfg0 = __raw_readl(sysc + SYSC_REG_SYSTEM_CONFIG0);
|
||||
dram_type = (cfg0 >> SYSCFG0_DRAM_TYPE_SHIFT) & SYSCFG0_DRAM_TYPE_MASK;
|
||||
+
|
||||
+ switch (dram_type) {
|
||||
+ case SYSCFG0_DRAM_TYPE_SDRAM:
|
||||
+ soc_info->mem_size_min = MT7620_SDRAM_SIZE_MIN;
|
||||
+ soc_info->mem_size_max = MT7620_SDRAM_SIZE_MAX;
|
||||
+ break;
|
||||
+
|
||||
+ case SYSCFG0_DRAM_TYPE_DDR1:
|
||||
+ soc_info->mem_size_min = MT7620_DDR1_SIZE_MIN;
|
||||
+ soc_info->mem_size_max = MT7620_DDR1_SIZE_MAX;
|
||||
+ break;
|
||||
+
|
||||
+ case SYSCFG0_DRAM_TYPE_DDR2:
|
||||
+ soc_info->mem_size_min = MT7620_DDR2_SIZE_MIN;
|
||||
+ soc_info->mem_size_max = MT7620_DDR2_SIZE_MAX;
|
||||
+ break;
|
||||
+ default:
|
||||
+ BUG();
|
||||
+ }
|
||||
+ soc_info->mem_base = MT7620_DRAM_BASE;
|
||||
}
|
||||
--
|
||||
1.7.10.4
|
||||
|
||||
|
|
@ -0,0 +1,45 @@
|
|||
From 6142d0fa1c7ba6050664a27d7cca87043217b01f Mon Sep 17 00:00:00 2001
|
||||
From: John Crispin <blogic@openwrt.org>
|
||||
Date: Sat, 13 Apr 2013 15:15:51 +0200
|
||||
Subject: [PATCH 43/79] MIPS: ralink: make use of the new memory detection
|
||||
code
|
||||
|
||||
Call detect_memory_region() from plat_mem_setup() unless the size was already
|
||||
read from the system controller.
|
||||
|
||||
Signed-off-by: John Crispin <blogic@openwrt.org>
|
||||
Patchwork: http://patchwork.linux-mips.org/patch/5184/
|
||||
---
|
||||
arch/mips/ralink/of.c | 9 +++++++++
|
||||
1 file changed, 9 insertions(+)
|
||||
|
||||
diff --git a/arch/mips/ralink/of.c b/arch/mips/ralink/of.c
|
||||
index 4165e70..fb15695 100644
|
||||
--- a/arch/mips/ralink/of.c
|
||||
+++ b/arch/mips/ralink/of.c
|
||||
@@ -11,6 +11,7 @@
|
||||
#include <linux/io.h>
|
||||
#include <linux/clk.h>
|
||||
#include <linux/init.h>
|
||||
+#include <linux/sizes.h>
|
||||
#include <linux/of_fdt.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/bootmem.h>
|
||||
@@ -85,6 +86,14 @@ void __init plat_mem_setup(void)
|
||||
* parsed resulting in our memory appearing
|
||||
*/
|
||||
__dt_setup_arch(&__dtb_start);
|
||||
+
|
||||
+ if (soc_info.mem_size)
|
||||
+ add_memory_region(soc_info.mem_base, soc_info.mem_size,
|
||||
+ BOOT_MEM_RAM);
|
||||
+ else
|
||||
+ detect_memory_region(soc_info.mem_base,
|
||||
+ soc_info.mem_size_min * SZ_1M,
|
||||
+ soc_info.mem_size_max * SZ_1M);
|
||||
}
|
||||
|
||||
static int __init plat_of_setup(void)
|
||||
--
|
||||
1.7.10.4
|
||||
|
||||
|
|
@ -0,0 +1,23 @@
|
|||
From b6038567015683bc9541e2bee1b9bc0db50589a3 Mon Sep 17 00:00:00 2001
|
||||
From: John Crispin <blogic@openwrt.org>
|
||||
Date: Thu, 30 May 2013 16:16:13 +0200
|
||||
Subject: [PATCH 44/79] MIPS: ralink: upstream v3.10
|
||||
|
||||
patches prior to this were sent upstream and accepted for v3.10
|
||||
|
||||
Signed-off-by: John Crispin <blogic@openwrt.org>
|
||||
---
|
||||
dummy | 1 +
|
||||
1 file changed, 1 insertion(+)
|
||||
create mode 100644 dummy
|
||||
|
||||
diff --git a/dummy b/dummy
|
||||
new file mode 100644
|
||||
index 0000000..421376d
|
||||
--- /dev/null
|
||||
+++ b/dummy
|
||||
@@ -0,0 +1 @@
|
||||
+dummy
|
||||
--
|
||||
1.7.10.4
|
||||
|
||||
|
|
@ -1,7 +1,7 @@
|
|||
From 5a2079532dfaf5762f658370ee7a0afb686f066e Mon Sep 17 00:00:00 2001
|
||||
From c7107291df4035794c67d7a904fe7419fedc5922 Mon Sep 17 00:00:00 2001
|
||||
From: John Crispin <blogic@openwrt.org>
|
||||
Date: Mon, 22 Apr 2013 23:11:42 +0200
|
||||
Subject: [PATCH 128/137] MIPS: ralink: add pinmux driver
|
||||
Subject: [PATCH 45/79] MIPS: ralink: add pinmux driver
|
||||
|
||||
Add code to setup the pinmux on ralonk SoC. The SoC has a single 32 bit register
|
||||
for this functionality with simple on/off bits. Building a full featured pinctrl
|
||||
|
|
@ -12,10 +12,12 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
|
|||
arch/mips/ralink/Makefile | 2 +-
|
||||
arch/mips/ralink/common.h | 2 ++
|
||||
arch/mips/ralink/of.c | 2 ++
|
||||
arch/mips/ralink/pinmux.c | 76 +++++++++++++++++++++++++++++++++++++++++++++
|
||||
4 files changed, 81 insertions(+), 1 deletion(-)
|
||||
arch/mips/ralink/pinmux.c | 77 +++++++++++++++++++++++++++++++++++++++++++++
|
||||
4 files changed, 82 insertions(+), 1 deletion(-)
|
||||
create mode 100644 arch/mips/ralink/pinmux.c
|
||||
|
||||
diff --git a/arch/mips/ralink/Makefile b/arch/mips/ralink/Makefile
|
||||
index 38cf1a8..341b4de 100644
|
||||
--- a/arch/mips/ralink/Makefile
|
||||
+++ b/arch/mips/ralink/Makefile
|
||||
@@ -6,7 +6,7 @@
|
||||
|
|
@ -27,15 +29,19 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
|
|||
|
||||
obj-$(CONFIG_SOC_RT288X) += rt288x.o
|
||||
obj-$(CONFIG_SOC_RT305X) += rt305x.o
|
||||
diff --git a/arch/mips/ralink/common.h b/arch/mips/ralink/common.h
|
||||
index 83144c3..f113fd6 100644
|
||||
--- a/arch/mips/ralink/common.h
|
||||
+++ b/arch/mips/ralink/common.h
|
||||
@@ -50,4 +50,6 @@ extern void prom_soc_init(struct ralink_
|
||||
@@ -50,4 +50,6 @@ extern void prom_soc_init(struct ralink_soc_info *soc_info);
|
||||
|
||||
__iomem void *plat_of_remap_node(const char *node);
|
||||
|
||||
+void ralink_pinmux(void);
|
||||
+
|
||||
#endif /* _RALINK_COMMON_H__ */
|
||||
diff --git a/arch/mips/ralink/of.c b/arch/mips/ralink/of.c
|
||||
index fb15695..f916774 100644
|
||||
--- a/arch/mips/ralink/of.c
|
||||
+++ b/arch/mips/ralink/of.c
|
||||
@@ -110,6 +110,8 @@ static int __init plat_of_setup(void)
|
||||
|
|
@ -47,6 +53,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
|
|||
return 0;
|
||||
}
|
||||
|
||||
diff --git a/arch/mips/ralink/pinmux.c b/arch/mips/ralink/pinmux.c
|
||||
new file mode 100644
|
||||
index 0000000..1720216
|
||||
--- /dev/null
|
||||
+++ b/arch/mips/ralink/pinmux.c
|
||||
@@ -0,0 +1,77 @@
|
||||
|
|
@ -127,3 +136,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
|
|||
+
|
||||
+ rt_sysc_w32(mode, SYSC_REG_GPIO_MODE);
|
||||
+}
|
||||
--
|
||||
1.7.10.4
|
||||
|
||||
|
|
@ -0,0 +1,228 @@
|
|||
From f14edca84cd854dac7dd429b1fbeb80ac76fca16 Mon Sep 17 00:00:00 2001
|
||||
From: John Crispin <blogic@openwrt.org>
|
||||
Date: Sat, 23 Mar 2013 19:44:41 +0100
|
||||
Subject: [PATCH 46/79] MIPS: ralink: add support for periodic timer irq
|
||||
|
||||
Adds a driver for the periodic timer found on Ralink SoC.
|
||||
|
||||
Signed-off-by: John Crispin <blogic@openwrt.org>
|
||||
---
|
||||
arch/mips/ralink/Makefile | 2 +-
|
||||
arch/mips/ralink/timer.c | 192 +++++++++++++++++++++++++++++++++++++++++++++
|
||||
2 files changed, 193 insertions(+), 1 deletion(-)
|
||||
create mode 100644 arch/mips/ralink/timer.c
|
||||
|
||||
diff --git a/arch/mips/ralink/Makefile b/arch/mips/ralink/Makefile
|
||||
index 341b4de..cae7d88 100644
|
||||
--- a/arch/mips/ralink/Makefile
|
||||
+++ b/arch/mips/ralink/Makefile
|
||||
@@ -6,7 +6,7 @@
|
||||
# Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org>
|
||||
# Copyright (C) 2013 John Crispin <blogic@openwrt.org>
|
||||
|
||||
-obj-y := prom.o of.o reset.o clk.o irq.o pinmux.o
|
||||
+obj-y := prom.o of.o reset.o clk.o irq.o pinmux.o timer.o
|
||||
|
||||
obj-$(CONFIG_SOC_RT288X) += rt288x.o
|
||||
obj-$(CONFIG_SOC_RT305X) += rt305x.o
|
||||
diff --git a/arch/mips/ralink/timer.c b/arch/mips/ralink/timer.c
|
||||
new file mode 100644
|
||||
index 0000000..0a6856c
|
||||
--- /dev/null
|
||||
+++ b/arch/mips/ralink/timer.c
|
||||
@@ -0,0 +1,192 @@
|
||||
+/*
|
||||
+ * This program is free software; you can redistribute it and/or modify it
|
||||
+ * under the terms of the GNU General Public License version 2 as published
|
||||
+ * by the Free Software Foundation.
|
||||
+ *
|
||||
+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
|
||||
+*/
|
||||
+
|
||||
+#include <linux/module.h>
|
||||
+#include <linux/platform_device.h>
|
||||
+#include <linux/interrupt.h>
|
||||
+#include <linux/timer.h>
|
||||
+#include <linux/of_gpio.h>
|
||||
+#include <linux/clk.h>
|
||||
+
|
||||
+#include <asm/mach-ralink/ralink_regs.h>
|
||||
+
|
||||
+#define TIMER_REG_TMRSTAT 0x00
|
||||
+#define TIMER_REG_TMR0LOAD 0x10
|
||||
+#define TIMER_REG_TMR0CTL 0x18
|
||||
+
|
||||
+#define TMRSTAT_TMR0INT BIT(0)
|
||||
+
|
||||
+#define TMR0CTL_ENABLE BIT(7)
|
||||
+#define TMR0CTL_MODE_PERIODIC BIT(4)
|
||||
+#define TMR0CTL_PRESCALER 1
|
||||
+#define TMR0CTL_PRESCALE_VAL (0xf - TMR0CTL_PRESCALER)
|
||||
+#define TMR0CTL_PRESCALE_DIV (65536 / BIT(TMR0CTL_PRESCALER))
|
||||
+
|
||||
+struct rt_timer {
|
||||
+ struct device *dev;
|
||||
+ void __iomem *membase;
|
||||
+ int irq;
|
||||
+ unsigned long timer_freq;
|
||||
+ unsigned long timer_div;
|
||||
+};
|
||||
+
|
||||
+static inline void rt_timer_w32(struct rt_timer *rt, u8 reg, u32 val)
|
||||
+{
|
||||
+ __raw_writel(val, rt->membase + reg);
|
||||
+}
|
||||
+
|
||||
+static inline u32 rt_timer_r32(struct rt_timer *rt, u8 reg)
|
||||
+{
|
||||
+ return __raw_readl(rt->membase + reg);
|
||||
+}
|
||||
+
|
||||
+static irqreturn_t rt_timer_irq(int irq, void *_rt)
|
||||
+{
|
||||
+ struct rt_timer *rt = (struct rt_timer *) _rt;
|
||||
+
|
||||
+ rt_timer_w32(rt, TIMER_REG_TMR0LOAD, rt->timer_freq / rt->timer_div);
|
||||
+ rt_timer_w32(rt, TIMER_REG_TMRSTAT, TMRSTAT_TMR0INT);
|
||||
+
|
||||
+ return IRQ_HANDLED;
|
||||
+}
|
||||
+
|
||||
+
|
||||
+static int rt_timer_request(struct rt_timer *rt)
|
||||
+{
|
||||
+ int err = request_irq(rt->irq, rt_timer_irq, IRQF_DISABLED,
|
||||
+ dev_name(rt->dev), rt);
|
||||
+ if (err) {
|
||||
+ dev_err(rt->dev, "failed to request irq\n");
|
||||
+ } else {
|
||||
+ u32 t = TMR0CTL_MODE_PERIODIC | TMR0CTL_PRESCALE_VAL;
|
||||
+ rt_timer_w32(rt, TIMER_REG_TMR0CTL, t);
|
||||
+ }
|
||||
+ return err;
|
||||
+}
|
||||
+
|
||||
+static void rt_timer_free(struct rt_timer *rt)
|
||||
+{
|
||||
+ free_irq(rt->irq, rt);
|
||||
+}
|
||||
+
|
||||
+static int rt_timer_config(struct rt_timer *rt, unsigned long divisor)
|
||||
+{
|
||||
+ if (rt->timer_freq < divisor)
|
||||
+ rt->timer_div = rt->timer_freq;
|
||||
+ else
|
||||
+ rt->timer_div = divisor;
|
||||
+
|
||||
+ rt_timer_w32(rt, TIMER_REG_TMR0LOAD, rt->timer_freq / rt->timer_div);
|
||||
+
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+static int rt_timer_enable(struct rt_timer *rt)
|
||||
+{
|
||||
+ u32 t;
|
||||
+
|
||||
+ rt_timer_w32(rt, TIMER_REG_TMR0LOAD, rt->timer_freq / rt->timer_div);
|
||||
+
|
||||
+ t = rt_timer_r32(rt, TIMER_REG_TMR0CTL);
|
||||
+ t |= TMR0CTL_ENABLE;
|
||||
+ rt_timer_w32(rt, TIMER_REG_TMR0CTL, t);
|
||||
+
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+static void rt_timer_disable(struct rt_timer *rt)
|
||||
+{
|
||||
+ u32 t;
|
||||
+
|
||||
+ t = rt_timer_r32(rt, TIMER_REG_TMR0CTL);
|
||||
+ t &= ~TMR0CTL_ENABLE;
|
||||
+ rt_timer_w32(rt, TIMER_REG_TMR0CTL, t);
|
||||
+}
|
||||
+
|
||||
+static int rt_timer_probe(struct platform_device *pdev)
|
||||
+{
|
||||
+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
||||
+ struct rt_timer *rt;
|
||||
+ struct clk *clk;
|
||||
+
|
||||
+ if (!res) {
|
||||
+ dev_err(&pdev->dev, "no memory resource found\n");
|
||||
+ return -EINVAL;
|
||||
+ }
|
||||
+
|
||||
+ rt = devm_kzalloc(&pdev->dev, sizeof(*rt), GFP_KERNEL);
|
||||
+ if (!rt) {
|
||||
+ dev_err(&pdev->dev, "failed to allocate memory\n");
|
||||
+ return -ENOMEM;
|
||||
+ }
|
||||
+
|
||||
+ rt->irq = platform_get_irq(pdev, 0);
|
||||
+ if (!rt->irq) {
|
||||
+ dev_err(&pdev->dev, "failed to load irq\n");
|
||||
+ return -ENOENT;
|
||||
+ }
|
||||
+
|
||||
+ rt->membase = devm_request_and_ioremap(&pdev->dev, res);
|
||||
+ if (!rt->membase) {
|
||||
+ dev_err(&pdev->dev, "failed to ioremap\n");
|
||||
+ return -ENOMEM;
|
||||
+ }
|
||||
+
|
||||
+ clk = devm_clk_get(&pdev->dev, NULL);
|
||||
+ if (IS_ERR(clk)) {
|
||||
+ dev_err(&pdev->dev, "failed get clock rate\n");
|
||||
+ return PTR_ERR(clk);
|
||||
+ }
|
||||
+
|
||||
+ rt->timer_freq = clk_get_rate(clk) / TMR0CTL_PRESCALE_DIV;
|
||||
+ if (!rt->timer_freq)
|
||||
+ return -EINVAL;
|
||||
+
|
||||
+ rt->dev = &pdev->dev;
|
||||
+ platform_set_drvdata(pdev, rt);
|
||||
+
|
||||
+ rt_timer_request(rt);
|
||||
+ rt_timer_config(rt, 2);
|
||||
+ rt_timer_enable(rt);
|
||||
+
|
||||
+ dev_info(&pdev->dev, "maximum frequncy is %luHz\n", rt->timer_freq);
|
||||
+
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+static int rt_timer_remove(struct platform_device *pdev)
|
||||
+{
|
||||
+ struct rt_timer *rt = platform_get_drvdata(pdev);
|
||||
+
|
||||
+ rt_timer_disable(rt);
|
||||
+ rt_timer_free(rt);
|
||||
+
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+static const struct of_device_id rt_timer_match[] = {
|
||||
+ { .compatible = "ralink,rt2880-timer" },
|
||||
+ {},
|
||||
+};
|
||||
+MODULE_DEVICE_TABLE(of, rt_timer_match);
|
||||
+
|
||||
+static struct platform_driver rt_timer_driver = {
|
||||
+ .probe = rt_timer_probe,
|
||||
+ .remove = rt_timer_remove,
|
||||
+ .driver = {
|
||||
+ .name = "rt-timer",
|
||||
+ .owner = THIS_MODULE,
|
||||
+ .of_match_table = rt_timer_match
|
||||
+ },
|
||||
+};
|
||||
+
|
||||
+module_platform_driver(rt_timer_driver);
|
||||
+
|
||||
+MODULE_DESCRIPTION("Ralink RT2880 timer");
|
||||
+MODULE_AUTHOR("John Crispin <blogic@openwrt.org");
|
||||
+MODULE_LICENSE("GPL");
|
||||
--
|
||||
1.7.10.4
|
||||
|
||||
|
|
@ -0,0 +1,31 @@
|
|||
From f7a5af8f5a3a4bc80a0c297c16c661d72ae356b4 Mon Sep 17 00:00:00 2001
|
||||
From: John Crispin <blogic@openwrt.org>
|
||||
Date: Sun, 19 May 2013 00:42:23 +0200
|
||||
Subject: [PATCH 47/79] MIPS: ralink: add rt_sysc_m32 helper
|
||||
|
||||
Signed-off-by: John Crispin <blogic@openwrt.org>
|
||||
---
|
||||
arch/mips/include/asm/mach-ralink/ralink_regs.h | 7 +++++++
|
||||
1 file changed, 7 insertions(+)
|
||||
|
||||
diff --git a/arch/mips/include/asm/mach-ralink/ralink_regs.h b/arch/mips/include/asm/mach-ralink/ralink_regs.h
|
||||
index 5a508f9..bd93014 100644
|
||||
--- a/arch/mips/include/asm/mach-ralink/ralink_regs.h
|
||||
+++ b/arch/mips/include/asm/mach-ralink/ralink_regs.h
|
||||
@@ -26,6 +26,13 @@ static inline u32 rt_sysc_r32(unsigned reg)
|
||||
return __raw_readl(rt_sysc_membase + reg);
|
||||
}
|
||||
|
||||
+static inline void rt_sysc_m32(u32 clr, u32 set, unsigned reg)
|
||||
+{
|
||||
+ u32 val = rt_sysc_r32(reg) & ~clr;
|
||||
+
|
||||
+ __raw_writel(val | set, rt_sysc_membase + reg);
|
||||
+}
|
||||
+
|
||||
static inline void rt_memc_w32(u32 val, unsigned reg)
|
||||
{
|
||||
__raw_writel(val, rt_memc_membase + reg);
|
||||
--
|
||||
1.7.10.4
|
||||
|
||||
|
|
@ -0,0 +1,39 @@
|
|||
From 8c2015a6eed656d8578a78e392625869ba8f9bb4 Mon Sep 17 00:00:00 2001
|
||||
From: John Crispin <blogic@openwrt.org>
|
||||
Date: Mon, 20 May 2013 20:30:11 +0200
|
||||
Subject: [PATCH 48/79] MIPS: ralink: make mt7620 ram detect verbose
|
||||
|
||||
Make the code print which of SDRAM, DDR1 or DDR2 was detected.
|
||||
|
||||
Signed-off-by: John Crispin <blogic@openwrt.org>
|
||||
---
|
||||
arch/mips/ralink/mt7620.c | 3 +++
|
||||
1 file changed, 3 insertions(+)
|
||||
|
||||
diff --git a/arch/mips/ralink/mt7620.c b/arch/mips/ralink/mt7620.c
|
||||
index 98ddb93..28350d0 100644
|
||||
--- a/arch/mips/ralink/mt7620.c
|
||||
+++ b/arch/mips/ralink/mt7620.c
|
||||
@@ -214,16 +214,19 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
|
||||
|
||||
switch (dram_type) {
|
||||
case SYSCFG0_DRAM_TYPE_SDRAM:
|
||||
+ pr_info("Board has SDRAM\n");
|
||||
soc_info->mem_size_min = MT7620_SDRAM_SIZE_MIN;
|
||||
soc_info->mem_size_max = MT7620_SDRAM_SIZE_MAX;
|
||||
break;
|
||||
|
||||
case SYSCFG0_DRAM_TYPE_DDR1:
|
||||
+ pr_info("Board has DDR1\n");
|
||||
soc_info->mem_size_min = MT7620_DDR1_SIZE_MIN;
|
||||
soc_info->mem_size_max = MT7620_DDR1_SIZE_MAX;
|
||||
break;
|
||||
|
||||
case SYSCFG0_DRAM_TYPE_DDR2:
|
||||
+ pr_info("Board has DDR2\n");
|
||||
soc_info->mem_size_min = MT7620_DDR2_SIZE_MIN;
|
||||
soc_info->mem_size_max = MT7620_DDR2_SIZE_MAX;
|
||||
break;
|
||||
--
|
||||
1.7.10.4
|
||||
|
||||
|
|
@ -0,0 +1,64 @@
|
|||
From 1652cf71db797b249c0d384e6c3d31b312b7012e Mon Sep 17 00:00:00 2001
|
||||
From: John Crispin <blogic@openwrt.org>
|
||||
Date: Mon, 20 May 2013 20:57:09 +0200
|
||||
Subject: [PATCH 49/79] MIPS: ralink: add verbose pmu info
|
||||
|
||||
Print the PMU and LDO settings on boot.
|
||||
|
||||
Signed-off-by: John Crispin <blogic@openwrt.org>
|
||||
---
|
||||
arch/mips/ralink/mt7620.c | 26 ++++++++++++++++++++++++++
|
||||
1 file changed, 26 insertions(+)
|
||||
|
||||
diff --git a/arch/mips/ralink/mt7620.c b/arch/mips/ralink/mt7620.c
|
||||
index 28350d0..69729a5 100644
|
||||
--- a/arch/mips/ralink/mt7620.c
|
||||
+++ b/arch/mips/ralink/mt7620.c
|
||||
@@ -20,6 +20,22 @@
|
||||
|
||||
#include "common.h"
|
||||
|
||||
+/* analog */
|
||||
+#define PMU0_CFG 0x88
|
||||
+#define PMU_SW_SET BIT(28)
|
||||
+#define A_DCDC_EN BIT(24)
|
||||
+#define A_SSC_PERI BIT(19)
|
||||
+#define A_SSC_GEN BIT(18)
|
||||
+#define A_SSC_M 0x3
|
||||
+#define A_SSC_S 16
|
||||
+#define A_DLY_M 0x7
|
||||
+#define A_DLY_S 8
|
||||
+#define A_VTUNE_M 0xff
|
||||
+
|
||||
+/* digital */
|
||||
+#define PMU1_CFG 0x8C
|
||||
+#define DIG_SW_SEL BIT(25)
|
||||
+
|
||||
/* does the board have sdram or ddram */
|
||||
static int dram_type;
|
||||
|
||||
@@ -187,6 +203,8 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
|
||||
u32 n1;
|
||||
u32 rev;
|
||||
u32 cfg0;
|
||||
+ u32 pmu0;
|
||||
+ u32 pmu1;
|
||||
|
||||
n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0);
|
||||
n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1);
|
||||
@@ -234,4 +252,12 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
|
||||
BUG();
|
||||
}
|
||||
soc_info->mem_base = MT7620_DRAM_BASE;
|
||||
+
|
||||
+ pmu0 = __raw_readl(sysc + PMU0_CFG);
|
||||
+ pmu1 = __raw_readl(sysc + PMU1_CFG);
|
||||
+
|
||||
+ pr_info("Analog PMU set to %s control\n",
|
||||
+ (pmu0 & PMU_SW_SET) ? ("sw") : ("hw"));
|
||||
+ pr_info("Digital PMU set to %s control\n",
|
||||
+ (pmu1 & DIG_SW_SEL) ? ("sw") : ("hw"));
|
||||
}
|
||||
--
|
||||
1.7.10.4
|
||||
|
||||
|
|
@ -0,0 +1,83 @@
|
|||
From d0d5dff525d921a7200d4919ea46c51fce27b7fb Mon Sep 17 00:00:00 2001
|
||||
From: John Crispin <blogic@openwrt.org>
|
||||
Date: Tue, 21 May 2013 15:50:31 +0200
|
||||
Subject: [PATCH 50/79] MIPS: ralink: adds a bootrom dumper module
|
||||
|
||||
This patch adds a trivial driver that allows userland to extract the bootrom of
|
||||
a SoC via debugfs.
|
||||
|
||||
Signed-off-by: John Crispin <blogic@openwrt.org>
|
||||
---
|
||||
arch/mips/ralink/Makefile | 2 ++
|
||||
arch/mips/ralink/bootrom.c | 48 ++++++++++++++++++++++++++++++++++++++++++++
|
||||
2 files changed, 50 insertions(+)
|
||||
create mode 100644 arch/mips/ralink/bootrom.c
|
||||
|
||||
diff --git a/arch/mips/ralink/Makefile b/arch/mips/ralink/Makefile
|
||||
index cae7d88..5fa6129 100644
|
||||
--- a/arch/mips/ralink/Makefile
|
||||
+++ b/arch/mips/ralink/Makefile
|
||||
@@ -15,4 +15,6 @@ obj-$(CONFIG_SOC_MT7620) += mt7620.o
|
||||
|
||||
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
|
||||
|
||||
+obj-$(CONFIG_DEBUG_FS) += bootrom.o
|
||||
+
|
||||
obj-y += dts/
|
||||
diff --git a/arch/mips/ralink/bootrom.c b/arch/mips/ralink/bootrom.c
|
||||
new file mode 100644
|
||||
index 0000000..f926f6f
|
||||
--- /dev/null
|
||||
+++ b/arch/mips/ralink/bootrom.c
|
||||
@@ -0,0 +1,48 @@
|
||||
+/*
|
||||
+ * This program is free software; you can redistribute it and/or modify it
|
||||
+ * under the terms of the GNU General Public License version 2 as published
|
||||
+ * by the Free Software Foundation.
|
||||
+ *
|
||||
+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
|
||||
+ */
|
||||
+
|
||||
+#include <linux/debugfs.h>
|
||||
+#include <linux/seq_file.h>
|
||||
+
|
||||
+#define BOOTROM_OFFSET 0x10118000
|
||||
+#define BOOTROM_SIZE 0x8000
|
||||
+
|
||||
+static void __iomem *membase = (void __iomem*) KSEG1ADDR(BOOTROM_OFFSET);
|
||||
+
|
||||
+static int bootrom_show(struct seq_file *s, void *unused)
|
||||
+{
|
||||
+ seq_write(s, membase, BOOTROM_SIZE);
|
||||
+
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+static int bootrom_open(struct inode *inode, struct file *file)
|
||||
+{
|
||||
+ return single_open(file, bootrom_show, NULL);
|
||||
+}
|
||||
+
|
||||
+static const struct file_operations bootrom_file_ops = {
|
||||
+ .open = bootrom_open,
|
||||
+ .read = seq_read,
|
||||
+ .llseek = seq_lseek,
|
||||
+ .release = single_release,
|
||||
+};
|
||||
+
|
||||
+static int bootrom_setup(void)
|
||||
+{
|
||||
+ if (!debugfs_create_file("bootrom", 0444,
|
||||
+ NULL, NULL, &bootrom_file_ops)) {
|
||||
+ pr_err("Failed to create bootrom debugfs file\n");
|
||||
+
|
||||
+ return -EINVAL;
|
||||
+ }
|
||||
+
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+postcore_initcall(bootrom_setup);
|
||||
--
|
||||
1.7.10.4
|
||||
|
||||
|
|
@ -0,0 +1,29 @@
|
|||
From 1996ffa03b1c6e0ab7db35dfd910923f4ab54b26 Mon Sep 17 00:00:00 2001
|
||||
From: John Crispin <blogic@openwrt.org>
|
||||
Date: Tue, 21 May 2013 17:15:54 +0200
|
||||
Subject: [PATCH 51/79] MIPS: ralink: add missing SZ_1M multiplier
|
||||
|
||||
On RT5350 the memory size is set to Bytes and not MegaBytes due to a missing
|
||||
multiplier.
|
||||
|
||||
Signed-off-by: John Crispin <blogic@openwrt.org>
|
||||
---
|
||||
arch/mips/ralink/of.c | 2 +-
|
||||
1 file changed, 1 insertion(+), 1 deletion(-)
|
||||
|
||||
diff --git a/arch/mips/ralink/of.c b/arch/mips/ralink/of.c
|
||||
index f916774..b25c1f2 100644
|
||||
--- a/arch/mips/ralink/of.c
|
||||
+++ b/arch/mips/ralink/of.c
|
||||
@@ -88,7 +88,7 @@ void __init plat_mem_setup(void)
|
||||
__dt_setup_arch(&__dtb_start);
|
||||
|
||||
if (soc_info.mem_size)
|
||||
- add_memory_region(soc_info.mem_base, soc_info.mem_size,
|
||||
+ add_memory_region(soc_info.mem_base, soc_info.mem_size * SZ_1M,
|
||||
BOOT_MEM_RAM);
|
||||
else
|
||||
detect_memory_region(soc_info.mem_base,
|
||||
--
|
||||
1.7.10.4
|
||||
|
||||
|
|
@ -0,0 +1,78 @@
|
|||
From b9afea3f5cf6c2da3b88f2902c4377e9c5b22a6d Mon Sep 17 00:00:00 2001
|
||||
From: John Crispin <blogic@openwrt.org>
|
||||
Date: Fri, 3 May 2013 00:04:58 +0200
|
||||
Subject: [PATCH 52/79] MIPS: use set_mode() to enable/disable the cevt-r4k
|
||||
irq
|
||||
|
||||
Signed-off-by: John Crispin <blogic@openwrt.org>
|
||||
---
|
||||
arch/mips/kernel/cevt-r4k.c | 39 ++++++++++++++++++++++++++-------------
|
||||
1 file changed, 26 insertions(+), 13 deletions(-)
|
||||
|
||||
diff --git a/arch/mips/kernel/cevt-r4k.c b/arch/mips/kernel/cevt-r4k.c
|
||||
index 7532392..afc08e4 100644
|
||||
--- a/arch/mips/kernel/cevt-r4k.c
|
||||
+++ b/arch/mips/kernel/cevt-r4k.c
|
||||
@@ -39,12 +39,6 @@ static int mips_next_event(unsigned long delta,
|
||||
|
||||
#endif /* CONFIG_MIPS_MT_SMTC */
|
||||
|
||||
-void mips_set_clock_mode(enum clock_event_mode mode,
|
||||
- struct clock_event_device *evt)
|
||||
-{
|
||||
- /* Nothing to do ... */
|
||||
-}
|
||||
-
|
||||
DEFINE_PER_CPU(struct clock_event_device, mips_clockevent_device);
|
||||
int cp0_timer_irq_installed;
|
||||
|
||||
@@ -89,6 +83,32 @@ struct irqaction c0_compare_irqaction = {
|
||||
.name = "timer",
|
||||
};
|
||||
|
||||
+void mips_set_clock_mode(enum clock_event_mode mode,
|
||||
+ struct clock_event_device *evt)
|
||||
+{
|
||||
+ switch (mode) {
|
||||
+ case CLOCK_EVT_MODE_ONESHOT:
|
||||
+ if (cp0_timer_irq_installed)
|
||||
+ break;
|
||||
+
|
||||
+ cp0_timer_irq_installed = 1;
|
||||
+
|
||||
+ setup_irq(evt->irq, &c0_compare_irqaction);
|
||||
+ break;
|
||||
+
|
||||
+ case CLOCK_EVT_MODE_SHUTDOWN:
|
||||
+ if (!cp0_timer_irq_installed)
|
||||
+ break;
|
||||
+
|
||||
+ cp0_timer_irq_installed = 0;
|
||||
+ free_irq(evt->irq, &c0_compare_irqaction);
|
||||
+ break;
|
||||
+
|
||||
+ default:
|
||||
+ pr_err("Unhandeled mips clock_mode\n");
|
||||
+ break;
|
||||
+ }
|
||||
+}
|
||||
|
||||
void mips_event_handler(struct clock_event_device *dev)
|
||||
{
|
||||
@@ -208,13 +228,6 @@ int __cpuinit r4k_clockevent_init(void)
|
||||
|
||||
clockevents_register_device(cd);
|
||||
|
||||
- if (cp0_timer_irq_installed)
|
||||
- return 0;
|
||||
-
|
||||
- cp0_timer_irq_installed = 1;
|
||||
-
|
||||
- setup_irq(irq, &c0_compare_irqaction);
|
||||
-
|
||||
return 0;
|
||||
}
|
||||
|
||||
--
|
||||
1.7.10.4
|
||||
|
||||
|
|
@ -0,0 +1,121 @@
|
|||
From 69a5834d0a90588578df9689530fc8f3ab8ef59a Mon Sep 17 00:00:00 2001
|
||||
From: John Crispin <blogic@openwrt.org>
|
||||
Date: Thu, 16 May 2013 23:28:23 +0200
|
||||
Subject: [PATCH 53/79] MIPS: ralink: add illegal access driver
|
||||
|
||||
Signed-off-by: John Crispin <blogic@openwrt.org>
|
||||
---
|
||||
arch/mips/ralink/Makefile | 2 +-
|
||||
arch/mips/ralink/ill_acc.c | 87 ++++++++++++++++++++++++++++++++++++++++++++
|
||||
2 files changed, 88 insertions(+), 1 deletion(-)
|
||||
create mode 100644 arch/mips/ralink/ill_acc.c
|
||||
|
||||
diff --git a/arch/mips/ralink/Makefile b/arch/mips/ralink/Makefile
|
||||
index 5fa6129..55a5bfc 100644
|
||||
--- a/arch/mips/ralink/Makefile
|
||||
+++ b/arch/mips/ralink/Makefile
|
||||
@@ -6,7 +6,7 @@
|
||||
# Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org>
|
||||
# Copyright (C) 2013 John Crispin <blogic@openwrt.org>
|
||||
|
||||
-obj-y := prom.o of.o reset.o clk.o irq.o pinmux.o timer.o
|
||||
+obj-y := prom.o of.o reset.o clk.o irq.o pinmux.o timer.o ill_acc.o
|
||||
|
||||
obj-$(CONFIG_SOC_RT288X) += rt288x.o
|
||||
obj-$(CONFIG_SOC_RT305X) += rt305x.o
|
||||
diff --git a/arch/mips/ralink/ill_acc.c b/arch/mips/ralink/ill_acc.c
|
||||
new file mode 100644
|
||||
index 0000000..4a3f696
|
||||
--- /dev/null
|
||||
+++ b/arch/mips/ralink/ill_acc.c
|
||||
@@ -0,0 +1,87 @@
|
||||
+/*
|
||||
+ * This program is free software; you can redistribute it and/or modify it
|
||||
+ * under the terms of the GNU General Public License version 2 as published
|
||||
+ * by the Free Software Foundation.
|
||||
+ *
|
||||
+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
|
||||
+ */
|
||||
+
|
||||
+#include <linux/interrupt.h>
|
||||
+#include <linux/of_platform.h>
|
||||
+#include <linux/of_irq.h>
|
||||
+
|
||||
+#include <asm/mach-ralink/ralink_regs.h>
|
||||
+
|
||||
+#define REG_ILL_ACC_ADDR 0x10
|
||||
+#define REG_ILL_ACC_TYPE 0x14
|
||||
+
|
||||
+#define ILL_INT_STATUS BIT(31)
|
||||
+#define ILL_ACC_WRITE BIT(30)
|
||||
+#define ILL_ACC_LEN_M 0xff
|
||||
+#define ILL_ACC_OFF_M 0xf
|
||||
+#define ILL_ACC_OFF_S 16
|
||||
+#define ILL_ACC_ID_M 0x7
|
||||
+#define ILL_ACC_ID_S 8
|
||||
+
|
||||
+#define DRV_NAME "ill_acc"
|
||||
+
|
||||
+static const char *ill_acc_ids[] = {
|
||||
+ "cpu", "dma", "ppe", "pdma rx","pdma tx", "pci/e", "wmac", "usb",
|
||||
+};
|
||||
+
|
||||
+static irqreturn_t ill_acc_irq_handler(int irq, void *_priv)
|
||||
+{
|
||||
+ struct device *dev = (struct device *) _priv;
|
||||
+ u32 addr = rt_memc_r32(REG_ILL_ACC_ADDR);
|
||||
+ u32 type = rt_memc_r32(REG_ILL_ACC_TYPE);
|
||||
+
|
||||
+ dev_err(dev, "illegal %s access from %s - addr:0x%08x offset:%d len:%d\n",
|
||||
+ (type & ILL_ACC_WRITE) ? ("write") : ("read"),
|
||||
+ ill_acc_ids[(type >> ILL_ACC_ID_S) & ILL_ACC_ID_M],
|
||||
+ addr, (type >> ILL_ACC_OFF_S) & ILL_ACC_OFF_M,
|
||||
+ type & ILL_ACC_LEN_M);
|
||||
+
|
||||
+ rt_memc_w32(REG_ILL_ACC_TYPE, REG_ILL_ACC_TYPE);
|
||||
+
|
||||
+ return IRQ_HANDLED;
|
||||
+}
|
||||
+
|
||||
+static int __init ill_acc_of_setup(void)
|
||||
+{
|
||||
+ struct platform_device *pdev;
|
||||
+ struct device_node *np;
|
||||
+ int irq;
|
||||
+
|
||||
+ /* somehow this driver breaks on RT5350 */
|
||||
+ if (of_machine_is_compatible("ralink,rt5350-soc"))
|
||||
+ return -EINVAL;
|
||||
+
|
||||
+ np = of_find_compatible_node(NULL, NULL, "ralink,rt3050-memc");
|
||||
+ if (!np)
|
||||
+ return -EINVAL;
|
||||
+
|
||||
+ pdev = of_find_device_by_node(np);
|
||||
+ if (!pdev) {
|
||||
+ pr_err("%s: failed to lookup pdev\n", np->name);
|
||||
+ return -EINVAL;
|
||||
+ }
|
||||
+
|
||||
+ irq = irq_of_parse_and_map(np, 0);
|
||||
+ if (!irq) {
|
||||
+ dev_err(&pdev->dev, "failed to get irq\n");
|
||||
+ return -EINVAL;
|
||||
+ }
|
||||
+
|
||||
+ if (request_irq(irq, ill_acc_irq_handler, 0, "ill_acc", &pdev->dev)) {
|
||||
+ dev_err(&pdev->dev, "failed to request irq\n");
|
||||
+ return -EINVAL;
|
||||
+ }
|
||||
+
|
||||
+ rt_memc_w32(ILL_INT_STATUS, REG_ILL_ACC_TYPE);
|
||||
+
|
||||
+ dev_info(&pdev->dev, "irq registered\n");
|
||||
+
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+arch_initcall(ill_acc_of_setup);
|
||||
--
|
||||
1.7.10.4
|
||||
|
||||
|
|
@ -0,0 +1,29 @@
|
|||
From 9b6da5fa57a40647f6d69ee1fcdabc5e5f7010dc Mon Sep 17 00:00:00 2001
|
||||
From: John Crispin <blogic@openwrt.org>
|
||||
Date: Thu, 23 May 2013 18:50:56 +0200
|
||||
Subject: [PATCH 54/79] MIPS: ralink: workaround DTB memory issue
|
||||
|
||||
If the DTB is too big a bug happens on boot when init ram is freed.
|
||||
This is a temporary fix until the real cause is found.
|
||||
|
||||
Signed-off-by: John Crispin <blogic@openwrt.org>
|
||||
---
|
||||
arch/mips/ralink/of.c | 2 +-
|
||||
1 file changed, 1 insertion(+), 1 deletion(-)
|
||||
|
||||
diff --git a/arch/mips/ralink/of.c b/arch/mips/ralink/of.c
|
||||
index b25c1f2..8efb02b 100644
|
||||
--- a/arch/mips/ralink/of.c
|
||||
+++ b/arch/mips/ralink/of.c
|
||||
@@ -74,7 +74,7 @@ void __init device_tree_init(void)
|
||||
unflatten_device_tree();
|
||||
|
||||
/* free the space reserved for the dt blob */
|
||||
- free_bootmem(base, size);
|
||||
+ //free_bootmem(base, size);
|
||||
}
|
||||
|
||||
void __init plat_mem_setup(void)
|
||||
--
|
||||
1.7.10.4
|
||||
|
||||
Some files were not shown because too many files have changed in this diff Show More
Loading…
Reference in New Issue