7b7317fc25
[ramips] unbreak portmapping - typo fix
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36293 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-09 14:39:01 +00:00
ffaccbaa81
[ramips] move memory detect node to dtsi files
...
Signed-of-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36290 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-09 14:19:36 +00:00
77a28db429
[ramips] Add Netgear WNCE2001 (OF version)
...
Add Netgear WNCE2001.
This is a small RT3052 device with 4MB spi flash and 32MB ram.
2 built-in antennas, 1x fastE, no USB, reset & wps switch.
On my model the AP/RT switch is unpopulated, but I verified the gpio
mapping for it.
The stock firmware is running an unprotected tftpd which allows you
to read any file from the filesystem.
Serial port is present on testpads (See image on the wiki page).
There are more testpads below the shield near the SoC, which
may have JTAG.
Slight annoyance: The bootloader is checksumming kernel&rootfs, but
can be tricked by zeroing checksum and length fields in the checksum
partition, see
target/linux/ramips/base-files/lib/preinit/04_disable_wnce2001_flash_checksumming
The manufacturer image is very similar to the DAP one, so I slightly
modified mkdapimg to support generating it.
The resulting
openwrt-ramips-rt305x-wnce2001-squashfs-factory-(worldwide|northamerica).bin
can be used to flash from stock to OpenWRT using the stock firmware
upgrade function, without using the serial port.
http://www.netgear.com/landing/wnce2001.aspx
http://wiki.openwrt.org/toh/netgear/wnce2001
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36289 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-09 14:19:33 +00:00
e61b526322
[ramips] remove bootargs from dts
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36288 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-09 14:19:28 +00:00
8fb3d4d8cf
[ramips] add ofpart info to the devicetrees
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36287 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-09 14:19:24 +00:00
6b65168cf8
[ramips] add sample swconfig portmap
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36286 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-09 14:19:20 +00:00
98f2fc0ea1
[ramips] set of_node before registring the switch
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36285 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-09 14:19:17 +00:00
3dc6fbf96d
[swconfig] allow loading port maps from OF
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36283 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-09 14:19:09 +00:00
4c9003ffc7
Adapt default network configuration for IPv6
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36278 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-09 08:03:08 +00:00
42e7765d34
ramips: TEW-691GR.dts fixes
...
* fix pinmux settings
* remove spi node
* add nor-flash node
* enable mdio-bus and add phy handle
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36276 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-08 12:34:17 +00:00
3d035c5be5
ramips: rt3883: enable the AR8216 driver
...
It is needed for the TEW-69{1,2}GR boards.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36275 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-08 12:34:15 +00:00
67f2b85c8b
ramips: add profile for the Omnima EMB-HPM board
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36274 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-08 11:12:04 +00:00
409d825847
ramips: OMNI-EMB-HPM.dts fixes
...
* add mdio-bus and phy nodes
* set phy-handle for the ethernet node
* define flash partiions
* cleanup flash node properties
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36273 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-08 11:12:03 +00:00
c9bcd064dd
ramips: add mdio-bus node to rt3883.dtsi
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36272 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-08 11:12:02 +00:00
c0a94a3105
ramips: fix MDIO/PHY handling
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36271 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-08 11:12:01 +00:00
ed8fffd327
ramips: fix console speed for OMNI-EMB-HPM
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36270 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-08 08:24:51 +00:00
d515b9e7c7
ramips: avoid invalid pointer dereference in pinmux code
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36269 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-08 08:24:50 +00:00
ee9470c508
ramips: TEW-692GR.dts fixes
...
* fix pinmux settings
* remove spi node
* add PCI node
* add nor-flash node
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36268 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-08 07:11:35 +00:00
04b9580dba
ramips: add PCI node into RTN56U.dts
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36264 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-07 20:56:22 +00:00
170c3c34d7
ramips: add PCI node for rt3883.dtsi
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36263 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-07 20:56:21 +00:00
9a5ee56a33
ramips: rt3883: enable PCI support
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36262 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-07 20:56:20 +00:00
c797fdfb4d
ramips: fix RT3883 PCI driver
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36261 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-07 20:56:18 +00:00
2ea7a39705
ramips: refresh patches
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36260 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-07 17:05:05 +00:00
95f88d23c0
ramips: add missing cpu-feature-override.h files
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36259 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-07 17:05:04 +00:00
24a761dac1
ramips: fix broken patch name
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36258 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-07 16:26:27 +00:00
d16801822a
ramips: fix polarity of GPIO buttons for RT-N56U
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36257 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-07 16:24:33 +00:00
941539cb04
x86/generic: remove old kernel configs
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36256 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-07 15:53:17 +00:00
b7a4639384
x86/generic: switch to 3.8
...
Only tested within a VM.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36255 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-07 15:53:15 +00:00
da00d19b24
x86/generic: add config for 3.8
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36254 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-07 15:53:13 +00:00
c2c4190a24
x86/alix2: remove old kernel configs
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36253 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-07 15:53:11 +00:00
9e8a9a0cc9
x86/alix2: switch to 3.8
...
Tested on an alix2d13 board.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36252 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-07 15:53:09 +00:00
c62a2a7fb8
x86/alix2: add config for 3.8
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36251 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-07 15:53:08 +00:00
eb343829ba
x86: add support for 3.8
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36250 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-07 15:53:05 +00:00
ae97f7ac24
ramips: add nor-flash node for the RT-N56U
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36249 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-07 14:46:11 +00:00
ba1f5717e8
ramips: fix pinmux settings for the RT-N56U
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36248 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-07 14:46:10 +00:00
c2751b8502
ramips: pinmux fixes
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36247 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-07 14:46:09 +00:00
c79885c667
ramips: remove trailing whitespaces from dts files
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36246 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-07 13:32:37 +00:00
2ae68184a8
ramips: handle PCI interrupts in plat_irq_dispatch
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36245 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-07 13:25:38 +00:00
319f0d0a6e
[ramips] fix typos inside dts files
...
Signed-off-by; Tobias Diedrick <ranma@tdiedrich.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36244 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-07 11:47:03 +00:00
695fe3d0ed
[ramips] fix default commandline in dts files
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36243 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-07 11:46:54 +00:00
00d4fe79c0
ramips: add cfi_cmdset_0002 patches
...
The parallel flash access on the RT-N56U is broken
without those patches.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36242 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-07 11:37:15 +00:00
d9d6fd3f5d
cns3xxx: remove the watchdog IRQ from the resources, it breaks the driver init and is useful only for testing
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36241 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-07 11:24:30 +00:00
ec4901457c
ramips: remove top-level {address,size}-cells properties from .dts files
...
Those are defined in the SoC specific .dtsi files.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36237 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-07 08:19:10 +00:00
94d356b7e1
brcm47xx: use old partition names again for kernel 3.8
...
This fixes sysupgrade. The partition names are used all over the Internet in various howtos.
Thank you russell for spotting this problem.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36235 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-06 22:22:26 +00:00
825fbbb900
brcm47xx: fix error in board detection when nvram is not available.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36234 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-06 19:02:25 +00:00
381a78c7e8
linux/3.8: implement pcibios_get_phb_of_node for MIPS
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36233 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-06 17:33:03 +00:00
9f4f28c91e
linux/3.8: backport devm_ioremap_resource from 3.9
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36232 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-06 17:33:00 +00:00
751af09d01
ramips: fix ethernet switch node in DIR-645.dts
...
Fix a typo in the node name and add vendor prefix
for the compatible string.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36231 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-06 17:19:35 +00:00
0a676cdd01
generic: rtl8367: add compatible string with vendor prefix
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36230 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-06 17:19:31 +00:00
37e86c353c
generic: rtl8367b: fix rtl8367b_extif_init_of
...
* disable external interface if its property is not present
* show an error message if the extif property is not valid
* use proper error values intead of -1
* fix memory leak
* wrap long lines
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36229 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-06 17:03:09 +00:00
c0a72756c4
linux/3.8: add more missing symbols
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36228 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-06 16:56:47 +00:00
5eab2bb70b
linux/3.8: add missing symbol
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36226 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-06 16:38:36 +00:00
4cd0e6b487
ramips: remove spi node from RTN56.dts
...
The RT-N56U board uses a parallel flash.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36223 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-06 12:37:40 +00:00
d4b5e559db
ramips: fix ethernet switch node in RTN56U.dts
...
The RT-N56U uses an RTL8367M switch.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36222 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-06 12:37:38 +00:00
64dd914158
ramips: rt3883: enable the RTL8367 driver
...
That is needed by the Asus RT-N56U board.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36221 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-06 12:37:37 +00:00
4455e17963
generic: rtl8367: allow to load extif config from OF
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36220 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-06 12:37:36 +00:00
d705fd0c51
generic: rtl8367: fix a typo in MODULE_DEVICE_TABLE macro
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36219 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-06 12:37:34 +00:00
b2b815c577
generic: rtl8367: add vendor prefix to the compatible string
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36218 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-06 12:37:32 +00:00
764f64149b
ramips: rt3883: sync 3.8 config
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36217 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-06 12:37:31 +00:00
fa10e8a31a
[ramips] fix typo pinmmux -> pinmux
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36216 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-06 11:46:34 +00:00
67dfec2fa8
kernel: update linux 3.8 to 3.8.6
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36215 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-06 11:40:44 +00:00
049b5f3748
refresh kernel configs with kconfig.pl
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36214 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-06 11:40:41 +00:00
7870e47cc0
[ramips] fix dir-615 h1 network config
...
http://patchwork.openwrt.org/patch/3527/
Signed-off-by: Daniel Petre <dani@ip6.ro>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36213 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-05 23:37:45 +00:00
ed6c67ec18
[ramips] fix typo that made gpiomuxing fail
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36212 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-05 23:10:42 +00:00
bc6e64b326
malta: add le64 and be64 sub targets
...
These two subtargets are used to build a 64-bit malta kernel along with
64-bit userland support.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36211 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-05 12:36:48 +00:00
2fec7702df
malta: move 32-bits options to subtarget config
...
Preliminary change to add support for MIPS64-based malta subtargets.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36210 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-05 12:36:45 +00:00
b88f444428
malta: move endianness kernel configuration to subtarget
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36209 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-05 12:36:41 +00:00
070c70f3e0
malta: enable mips16 feature flag
...
The malta platform supports mips16 advertise this feature flag.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36203 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-05 12:36:16 +00:00
0f8a260d4b
[lantiq] Migrate lantiq platform to common led helper functions
...
http://patchwork.openwrt.org/patch/3316/
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36187 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-03 10:01:07 +00:00
f73f19c966
[lantiq] add a missing patch that makes board detection work again
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36186 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-03 10:01:03 +00:00
c0d814a55f
[kernel] Patch for invoking (pre)init
...
http://patchwork.openwrt.org/patch/3485/
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36183 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-03 10:00:50 +00:00
381db32e2c
[ramips] add profile for tenda w150m board
...
http://patchwork.openwrt.org/patch/3371/
Signed-off-by: Chi Zhang <zhangchi866@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36176 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-03 10:00:21 +00:00
37b08bf005
[ramips] fix ALL5002 default package selection
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36175 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-03 10:00:16 +00:00
3e76a10173
[ramips] Build WW factory image for DAP-1350
...
http://patchwork.openwrt.org/patch/3466/
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36174 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-03 10:00:12 +00:00
12e2a6d321
[ramips] add Huawei D105
...
http://patchwork.openwrt.org/patch/3510/
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36173 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-03 10:00:08 +00:00
6e4120f245
[ramips] add profile for the Edimax 3g-6200NL board
...
http://patchwork.openwrt.org/patch/3214/
Signed-off-by: Cédric Le Moing <cedric.le-moing@laposte.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36172 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-03 10:00:03 +00:00
dfd8fe4f2d
[ramips] there is no ttyS1 console
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36171 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-03 09:59:59 +00:00
209682186d
[ramips] make v3.8 the default
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36170 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-03 09:59:55 +00:00
34e756e5c2
[ramips] add new image/Makefile
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36169 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-03 09:59:51 +00:00
8c64c84a1e
[ramips] add the dts files that describe the boards in future
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36168 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-03 09:59:46 +00:00
e97253bd46
[ramips] fix upvel profile names
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36167 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-03 09:59:41 +00:00
485fd1d19a
[ramips] fix rt3883 config-3.8
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36166 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-03 09:59:37 +00:00
800132d77e
[ramips] fix rt305x config-3.8
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36165 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-03 09:59:33 +00:00
35a588e59e
[ramips] mark rt288x broken until the test hardware arrives in the mail
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36164 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-03 09:59:16 +00:00
6bb6cbe600
[ramips] add patches for v3.8
...
Signed-off-by: John Crsipin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36163 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-03 09:59:10 +00:00
cf9b57476d
[ramips] remove old ralink 3.8 patches
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36162 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-03 09:58:48 +00:00
84238ad24d
[ramips] move files to files-3.7
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36161 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-03 09:58:44 +00:00
fd1af44d07
[ramips] add feature gpio
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36160 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-03 09:58:37 +00:00
927f4ae6ec
[generic] add OF support to rtl8367b driver
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36159 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-03 09:58:33 +00:00
0f59629a24
[generic] make firmware loading work on v3.9
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36158 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-03 09:58:28 +00:00
5bb74fd269
mpc85xx: enable ath9k and wpad-mini by default
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36142 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-01 09:53:29 +00:00
349255c8d1
brcm47xx: generate images for Linksys E.... models
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36139 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-27 15:51:28 +00:00
816d91335b
gemini: remove usage of ehci_port_power() it was removed in kernel 3.8
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36138 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-27 15:48:07 +00:00
400d0de831
brcm47xx: activate image generation for some Netgear devices which are on the market and should be supported.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36137 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-27 15:35:52 +00:00
03e9d50168
brcm47xx: generate images for more WRT...N models
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36136 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-27 15:34:55 +00:00
d1d59cf7e0
[gemini]: upgrade to 3.9-rc4, disable unsupported boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36128 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-25 14:18:32 +00:00
88c5f2bfbd
[generic/3.9]: refresh patches against -rc4
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36127 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-25 13:53:48 +00:00
a95842d490
[generic/3.9]: add missing symbols
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36126 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-25 13:53:17 +00:00
9dcc5a385b
ar71xx: fix ethernet LEDs on the TL-WDR3500
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36122 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-25 06:40:03 +00:00
a7b9cbd468
ar71xx: add GPIO output select values for AR934x
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36121 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-25 06:40:00 +00:00
ec437235a4
ar71xx: add default LED configuration for the WL-WRD3500
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36120 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-24 21:07:21 +00:00
63d557f83b
ar71xx: fix USB power GPIO on the TL-WDR3500
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36119 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-24 19:23:47 +00:00
8a0c278427
ar71xx: remove numeric suffix of the TL-WDR3500 USB LED
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36118 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-24 19:23:45 +00:00
30eb450d54
ar71xx: add diag support for the TL-WDR3500
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36117 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-24 19:23:43 +00:00
b039fcf6a6
ar71xx: add default switch configuration for the TL-WDR3500
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36116 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-24 19:23:36 +00:00
9a587eb82e
kernel: add missing config options for au1000 target
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36115 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-24 14:01:38 +00:00
c697edaab2
kernel: add missing CONFIG_BLK_DEV_IDE_AU1XXX config option.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36102 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-21 14:56:04 +00:00
da8dfca256
kernel: REGMAP_SPI should only be selectable when SPI_MASTER is selected
...
This was turned from a silent confg option without a text to a normal
config option which could be selected without any other option
depending on this. This could cause the situation where REGMAP_SPI was
selected without SPI_MASTER being selected.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36101 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-21 14:50:59 +00:00
0314910b37
brcm47xx: generate images for some more devices
...
These devices should be supported by trunk now.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36099 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-20 22:01:18 +00:00
0efdcebf5d
kernel: add some fixes for kernel 3.9
...
This patch fixes some compile problems with kernel 3.9 and adds some missing linux 3.9 handling into kernel packages.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36098 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-20 21:59:24 +00:00
af64f497a3
kernel: add some missing config options for kernel 3.9
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36097 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-20 21:53:51 +00:00
2b78201a90
kernel: make SND_COMPRESS_OFFLOAD symbol visible for selection ( #13193 )
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36091 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-19 14:13:39 +00:00
4f925948b1
uml: remove 3.6 kernel patches
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36080 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-17 19:47:04 +00:00
ad8be074e3
uml: remove 3.3. kernel patches
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36079 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-17 19:46:59 +00:00
bad07a0699
uml: switch to 3.8 kernel
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36078 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-17 19:46:54 +00:00
6cc4256076
uml: add support for 3.8 kernel
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36077 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-17 19:46:49 +00:00
2c39c0cdbd
uml: remove 3.2 patches
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36076 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-17 19:46:43 +00:00
27513dcee7
ep93xx: switch to 3.8 kernel
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36075 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-17 19:46:37 +00:00
e4dd05ab0b
kernel: refresh 3.9 patches
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36074 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-17 19:46:32 +00:00
92d396ae44
ep93xx: add support for 3.8 kernel
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36073 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-17 19:46:25 +00:00
567013758d
ep93xx: account for sound soc directory rename in 3.7
...
sound/soc/ep93xx -> sound/soc/cirrus
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36071 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-17 19:45:55 +00:00
d7bb11285d
kernel: set regmap-core module license
...
Fixes the following issues:
[ 7.660000] regmap_core: module license 'unspecified' taints kernel
[ 7.690000] Disabling lock debugging due to kernel
[ 7.700000] regmap_core: Unknown symbol lzo1x_decompress_safe (err 0
[ 7.710000] regmap_core: Unknown symbol lzo1x_1_compress (err 0
[ 7.720000] regmap_core: Unknown symbol devres_add (err 0
[ 7.730000] regmap_core: Unknown symbol debugfs_create_bool (err 0
[ 7.750000] regmap_core: Unknown symbol devres_alloc (err 0
[ 7.760000] regmap_core: Unknown symbol debugfs_remove_recursive (err 0
[ 7.770000] regmap_core: Unknown symbol debugfs_create_file (err 0
[ 7.780000] regmap_core: Unknown symbol devres_free (err 0
[ 7.800000] regmap_core: Unknown symbol devres_find (err 0
[ 7.810000] regmap_core: Unknown symbol debugfs_create_dir (err 0)
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36070 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-17 19:45:48 +00:00
365eb27ba4
au1000: remove support for 3.3. kernel
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36067 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-17 14:33:47 +00:00
45acb1fd6f
au1000: switch to 3.6 kernel
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36066 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-17 14:33:41 +00:00
ac2749d0f0
au1000: keep the MTX-1 watchdog pin low during boot
...
Do this until the watchdog driver is loaded and the user-space watchdog
daemon can start pinging the watchdog.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36065 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-17 14:33:36 +00:00
34fe10e114
ep93xx: remove 3.3 kernel support
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36064 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-17 14:33:23 +00:00
0d1596f2c8
mcs814x: use devm_request_and_ioremap in mcs814x-rng driver
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36063 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-17 14:33:18 +00:00
513d4fc9c9
mcs814x: use devm_request_and_ioremap helper for nuport_mac driver
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36062 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-17 14:33:13 +00:00
66fd7561b3
mcs814x: remove PCI code
...
None of the boards we support are using it nor have it wired out of the
SoC, just remove it.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36061 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-17 14:33:07 +00:00
61de74b7f5
mcs814x: implement MULTI_IRQ_HANDLER
...
Allows us to get rid of the IRQ entry point assembly
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36060 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-16 22:25:47 +00:00
4ac0d0408c
mcs814x: use the standard device tree binding to represent a PHY node
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36059 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-16 22:25:41 +00:00
f6f637f2ed
mpc85xx: add profile and build image for the TL-WDR4900 v1 board
...
Now that the ethernet switch is working, create firmware
images to make impatient users happy.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36051 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-15 16:11:45 +00:00
562eca38dc
generic: ar8216: start AR8327 switch from the probe routine
...
The AR8327 switch gets its configuration from platform
data or from the device-tree. This allows to start it
from the probe routine. Doing so makes it usable with
ethernet drivers which only connects to the PHY device
when the ethernet interface is opened.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36050 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-15 16:06:28 +00:00
07e8f60ec8
generic: ar8216: add ar8xxx_start helper
...
Move switch starting code into a separate function.
This makes it usable from other places.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36049 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-15 16:06:25 +00:00
adb4109f8b
mpc85xx: add AR8327 initvals to the TL-WDR4900 devicetree
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36048 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-15 15:53:06 +00:00
bfcb790085
generic: ar8216: add OF configuration support for AR8327
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36047 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-15 15:50:08 +00:00
74ed419c1c
generic: ar8216: separate platform_data based AR8327 code
...
Move platform_data specific configuration code
into a separate routine. Do it in preparation
for the upcoming OF support.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36046 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-15 15:50:05 +00:00
11d65c1f35
generic: ar8216: don't use platform_data in ar8327_init_port
...
Fetch the PORT_STATUS values in ar8327_hw_init and
store those in a private data stucture for later use.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36045 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-15 15:50:02 +00:00
74e5f4fdb1
generic: ar8216: move the ar8327_get_port_init_status function
...
It will be used in ar8327_probe routine.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36044 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-15 15:50:00 +00:00
106519bdbb
generic: ar8216: simplify and rename ar8327_config_port
...
Return with the PORT_STATUS register value instead of
writing that directly into the corresponding register.
Also rename the function to ar8327_get_port_init_status.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36043 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-15 15:49:57 +00:00
0d8238f7b3
generic: ar8216: remove superfluous pdata checks
...
The presence of the platform data is already verified in
ar8327_hw_init, and the driver does not start without that
anyway.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36042 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-15 15:49:55 +00:00
84da566873
kernel: update linux 3.8 to 3.8.3
...
Also refresh the related generic/platform patches.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36039 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-15 14:39:51 +00:00
257aff3780
ar71xx: build images for the TL-MR11U v2
...
[juhosg: use different profile name for v1 and v2, and add
multi profile to build for both versions]
Signed-off-by: Guilhem Lettron <guilhem@lettron.fr>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36038 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-15 14:35:52 +00:00
9f44658f89
ar71xx: rw2458n - Use eeprom (art) from wifi card
...
Use eeprom (art) from included wifi card, not hard coded in flash.
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36037 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-15 14:35:50 +00:00
7f077a5381
ar71xx: Error fix in Kernel for MR3420v2 Ethernet Switch configuration
...
Error in using another MDIO (AP123 platform using only one GE1 device
for eth0 and eth1) for the router mr3420v2.
?onfirmed: https://forum.openwrt.org/viewtopic.php?pid=194779#p194779
Routers in this sense are the same and the only difference is: USB
port, USB led, instead of the GPIO-switch we have GPIO-button.
Signed-off-by: Dmytro <dioptimizer@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36036 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-15 14:35:48 +00:00
762628c216
[lantiq] ACMP252: fix USB-enable GPIO and use default PCI configuration for now
...
EEPROM is an actial serial EEPROM on the WiFi module, therefore we can remove
ralink_eep from the dts.
USB power-enable GPIO turned out to be GPIO #3 (found via probing/brute-force).
PCI works with default settings as long as the vendor bootloader is used.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36030 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-14 18:43:54 +00:00
6bead98ab0
[lantiq] fix buttons on vr9 eval kit
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36029 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-14 18:43:49 +00:00
8df178a888
[lantiq] select vdsl packages on vr9 boards
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36028 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-14 18:43:44 +00:00
3750d2ab0a
[lantiq] fix fritzbox 3370 partitions/memory/cmdline
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36027 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-14 18:43:39 +00:00
1a11814aec
[lantiq] build jffs images for nand based fritzbox
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36026 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-14 18:43:34 +00:00
d5d3a4d87b
[lantiq] bump to v3.8
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36014 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-14 18:42:29 +00:00
b9be683c5c
[lantiq] move GPHY FW blobs to non versioned folder
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36013 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-14 18:42:21 +00:00
ddc8718f7f
kernel: add support for 3.9-rc2
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36008 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-14 14:45:56 +00:00
bbb2cf0b18
[base-files/generic] update the /init file to start /sbin/init
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36002 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-13 18:11:13 +00:00
dcb02ff080
[ar71xx] make sure the console works when using procd as our pid 1
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36000 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-13 18:11:00 +00:00
e3f013577e
gemini: remove 3.3 support
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35995 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-12 18:22:34 +00:00
3529884ed4
gemini: switch to 3.8
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35994 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-12 18:22:33 +00:00
28491651e5
gemini: add support for 3.8
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35993 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-12 18:22:22 +00:00
92c75fe5c3
[lantiq] fixes NO_XIP on CFI0001 flash
...
This patch disables the execute-in-place (XIP) support for flash on
lantiq. This has to be disabled since the bus which flash is connected
to does not support unaligned accesses. Resolves data bus errors on
Lantiq routers with Intel command set flash.
Signed-off-by: Matti Laakso <malaakso@elisanet.fi>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35992 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-12 13:53:08 +00:00
0d45d11435
[lantiq] add support for AudioCodes AC-252
...
user-space support for extracting the EEPROM for the RaLink WiFi is still
missing. Besides this, it's all working.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35990 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-12 13:52:54 +00:00
c1d133c6d7
[lantiq] unbreak dgn3500 spi-gpio
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35989 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-12 13:52:47 +00:00
107efb4370
[ramips] make sure errors get sent to /dev/null
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35988 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-12 13:52:40 +00:00
2199cedcc0
[ar71xx] make sure errors get sent to /dev/null
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35987 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-12 13:52:33 +00:00
d441150960
avr32: remove 3.3 support
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35985 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-12 13:28:33 +00:00
f725494cb9
avr32: switch to 3.8
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35984 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-12 13:28:32 +00:00
59fb8414e3
avr32: add support for 3.8
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35983 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-12 13:28:31 +00:00
34b8fc733e
avr32: add sysupgrade support
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35982 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-12 13:28:27 +00:00
3d115adb28
avr32: add firmware partition
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35981 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-12 13:28:23 +00:00
5d2ba77663
avr32: add diag support
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35980 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-12 13:28:21 +00:00
80536ac2a5
avr32: create network config dynamically
...
The default network configuration from base-files
is not correct for the NGW100 board.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35979 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-12 13:28:19 +00:00
4f7184970b
avr32: built the firmware images from the lzma compressed uImage
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35978 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-12 13:28:16 +00:00
389717fe06
mpc52xx: remove 3.3 support
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35977 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-12 07:18:37 +00:00
07038309f4
mpc52xx: switch to 3.8
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35976 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-12 07:18:36 +00:00
b8b2409436
mpc52xx: add support for 3.8
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35975 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-12 07:18:34 +00:00
90c84fd003
ramips: add profile and build image for the Upvel UR-326N4G board
...
Patch from: Дмитрий Лебедев <lebedev@trendnet.ru>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35972 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-11 21:02:45 +00:00
c40428c0f6
ramips: add user-space support for the Upvel UR-326N4G board
...
[juhosg: fix mac address setup]
Patch from: Дмитрий Лебедев <lebedev@trendnet.ru>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35971 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-11 21:02:43 +00:00
1a059fb489
ramips: add kernel support for the Upvel UR-326N4G board
...
[juhosg: add missing symbols to config-3.{7,8}]
Patch from: Дмитрий Лебедев <lebedev@trendnet.ru>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35970 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-11 21:02:40 +00:00
f31d10db47
ar71xx: om2p-hs: use correct bit mask to disable JTAG functionality
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35966 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-11 19:52:54 +00:00
86e00f170d
ar71xx: add AR934X_GPIO_FUNC_* defines
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35965 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-11 19:52:51 +00:00
12ddae188d
ar71xx: makefile changes to build image for MR3420v2
...
Patch-by: Dmytro <dioptimizer@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3440/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35964 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-11 15:55:25 +00:00
5069d8687d
ar71xx: add user-space support for MR3420v2
...
Patch-by: Dmytro <dioptimizer@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3442/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35962 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-11 15:55:22 +00:00
8824b6de38
ar71xx: add kernel support for MR3420v2
...
[juhosg: use gpio_request_one to enable the USB power]
Patch-by: Dmytro <dioptimizer@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@opewrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35961 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-11 15:55:20 +00:00
5cd81e4099
ar71xx: enabling control GPIO14 and GPIO15 on MR3040/MR11U
...
LAN1 and LAN2 LEDs not present (it pulled to ground via
resistors) on MR3040 and MR11U devices. This little patch
enabling ability to control GPIO14 and GPIO15.
Patch-by: Dmytro <dioptimizer@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3439/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35960 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-11 15:55:19 +00:00
f052834441
ar71xx: add profile support for dir-835-a1
...
Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at>
Patchwork: http://patchwork.openwrt.org/patch/3427/mbox/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35959 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-11 15:55:17 +00:00
dadf739365
ar71xx: add user space support for dir-835-a1
...
Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at>
Patchwork: http://patchwork.openwrt.org/patch/3425/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35958 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-11 15:55:15 +00:00
edff64b8b3
ar71xx: add kernel support for dir-835-a1
...
[juhosg:
- remove custom mdio bus info and platform data for ar8327, clear the
.led_cfg field from dir835a1_setup instead,
- remove arguments of dir835c1_generic_setup function, register the
LEDs directly from the board specific setup instead]
Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at>
Patchwork: http://patchwork.openwrt.org/patch/3426/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35957 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-11 15:55:13 +00:00
df755284d9
cns3xxx: ethernet - clean the tx ring before refilling the rx ring to reduce memory pressure
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35953 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-11 02:29:53 +00:00
4b1c2fb15f
cns3xxx: ethernet - clean the tx ring only in the poll function, not in the xmit handler
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35952 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-11 02:29:47 +00:00
dfe1972d62
cns3xxx: increase number of ethernet driver rx buffers
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35951 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-10 21:59:32 +00:00
1bb86e38d7
cns3xxx: prevent the ethernet driver from accessing uninitialized dma descriptor entries
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35950 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-10 21:59:28 +00:00
b019b3bb2f
cns3xxx: minor ethernet driver cleanup
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35949 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-10 21:59:21 +00:00
66227ce952
brcm47xx: refresh config
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35948 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-10 20:42:26 +00:00
5b4c3e8098
xburst: fix compilation: remove the __dev attributes
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35946 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-10 20:26:28 +00:00
f32b22c8c9
kernel: add some missing config options found by the buildbot.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35945 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-10 20:25:19 +00:00
f7b3da4d14
cns3xxx: use kmalloc instead of kzalloc for ethernet rx buffers
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35943 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-10 18:25:20 +00:00
5dab5bf10c
cns3xxx: fix an rx irq handling corner case
...
When an rx interrupt comes in, rx interrupts are disabled and NAPI
polling is scheduled. During the NAPI poll, the driver first processes
received frames in the ring, then fills the dma descriptor slots with
new buffers and calls tx complete, before finally re-enabling rx
interrupts and completing NAPI (if below the budget).
If the hardware rx queue overflows before the napi complete is called,
the hardware will not throw any further rx interrupts and rx processing
stops completely.
Fix this by keeping NAPI polling scheduled until it completes a poll
without receiving any packets, and also handle NAPI completion before
refilling rx or completing tx.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35942 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-10 18:25:16 +00:00
275672c3c9
cns3xxx: fix ethernet driver memory barrier usage
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35941 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-10 18:25:11 +00:00
88643da3bf
realview: remove 3.3 support
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35940 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-10 18:06:31 +00:00
f4d5a1cba5
realview: switch to 3.8
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35939 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-10 18:06:29 +00:00
3af0a3f4c6
kernel: prevent -f*-sections from leaking into the boot zImage wrapper on arm
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35938 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-10 17:04:36 +00:00
9695b598fb
kernel: ensure that the arm exception handlers get preserved
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35937 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-10 17:04:31 +00:00
5191a29832
kernel: use -ffunction-sections, -fdata-sections and --gc-sections on ARM to reduce kernel image size, disable those flags when tracing on MIPS to fix compile errors
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35936 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-10 14:51:42 +00:00
b3bb99dc95
xburst: remove 3.3 support
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35934 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-10 13:24:54 +00:00
3227cd693e
xburst: switch to 3.8
...
Compile tested only, so add broken flag.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35933 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-10 13:24:52 +00:00
3a8f81608f
xburst: add support for 3.8
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35932 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-10 13:24:50 +00:00
8a147f2970
linux/3.8: add missing config symbols
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35931 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-10 13:24:47 +00:00
8fcf953db3
adm5120: remove 3.7 support
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35930 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-10 13:24:46 +00:00
c824d4394f
adm5120: switch to 3.8
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35929 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-10 13:24:45 +00:00
5c0c067b0c
malta: remove 3.7 support
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35928 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-10 13:24:44 +00:00
4323118453
malta: switch to 3.8
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35927 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-10 13:24:43 +00:00
ec4775a92f
atheros: remove 3.3 support
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35926 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-10 13:24:42 +00:00
89cc1ba307
atheros: switch to 3.8
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35925 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-10 13:24:40 +00:00
fd2a497ea5
mpc83xx: remove 3.7 support
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35924 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-10 13:24:39 +00:00
a39176728f
mpc83xx: switch to 3.8
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35923 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-10 13:24:38 +00:00
7ce9d7e1e9
rb532: remove 3.7 support
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35922 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-10 13:21:40 +00:00
68a2f6bc53
rb532: switch to 3.8
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35921 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-10 13:21:33 +00:00
9d76137bf3
rb532: add support for 3.8
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35920 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-10 13:21:29 +00:00
4f146674b1
ar71xx: correct board name to make LEDs work on RB750
...
Patch by: Denver A <denvera@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3419/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35919 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-10 07:20:57 +00:00
697bc122f2
ppc40x: remove __dev_{in,ex}it annotations
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35918 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-10 07:20:54 +00:00
9ec6f799c1
cns3xxx: reduce buffer allocation size to 2048 bytes, improves ethernet performance
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35917 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-10 01:27:04 +00:00
f4caeaa7c6
cns3xxx: remove linux 3.3 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35916 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-10 01:01:55 +00:00
74f0116420
cns3xxx: disable CONFIG_PROC_STRIPPED and add an init script to set the ethernet cpu affinity (improves lan<->wlan bridging performance)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35915 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-10 01:01:51 +00:00
bbcb144cde
brcm47xx: add some more partition parser fixes by Rafał Miłecki
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35912 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-09 19:48:03 +00:00
a5d279ddec
brcm47xx: netconfig: add bacis support for swconfig
...
Parse the cpu port from swconfig and explicitly mark the cpu port as tagged.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35911 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-09 19:24:43 +00:00
76c2afef66
kernel: add a missing config symbol for 3.8
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35910 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-09 19:04:37 +00:00
947ebaae8c
cns3xxx: add linux 3.8 support and use it by default
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35908 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-09 18:51:46 +00:00
eda3f47aeb
kernel: fix mpcore watchdog symbol export
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35907 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-09 18:51:39 +00:00
24779214b3
cns21xx: remove 3.7 support
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35886 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-04 16:08:41 +00:00
f131205460
cns21xx: switch to 3.8
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35885 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-04 16:08:39 +00:00
073e25bfa6
ppc44x: remove 3.7 support
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35884 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-04 15:16:37 +00:00
f2d7f949f8
ppc44x: switch to 3.8
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35883 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-04 15:16:35 +00:00
31c6a7eaf5
ppc40x: remove 3.7 support
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35882 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-04 15:16:33 +00:00
0d8c5ddc53
ppc40x: switch to 3.8
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35881 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-04 15:16:32 +00:00
02f4fc8b49
brcm63xx: fix LED names for various boards
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35880 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-04 13:42:35 +00:00
7de535d0a3
ar71xx: add backported watchdog patches
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35879 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-04 12:08:28 +00:00
0d7167f0db
ar71xx: use backported QCA955x patches
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35878 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-04 11:48:15 +00:00
8b0b9fe414
ar71xx: use backported PCI patches
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35877 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-04 11:48:08 +00:00
6ec2ddce1b
ar71xx: use backported MISC IRQ patch
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35876 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-04 11:48:06 +00:00
47d054b3d5
ar71xx: use backported GPIO patches
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35875 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-04 11:48:04 +00:00
29f41f3be0
ar71xx: enable building ramdisk images for WZRHPG30XNH board types
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
Acked-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35874 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-04 11:37:28 +00:00
2a6ca56157
ar71xx: use backported SPI patches
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35873 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-04 09:40:44 +00:00
a59e544adb
mpc85xx: remove 3.7 support
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35872 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-04 09:37:25 +00:00
3bdef13fdb
mpc85xx: switch to 3.8
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35871 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-04 09:37:24 +00:00
02effaf2d6
ar71xx: remove 3.7 support
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35870 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-04 09:03:50 +00:00
2c47907975
ar71xx: switch to 3.8
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35869 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-04 08:47:38 +00:00
c5ba6a9391
kernel: update linux 3.8 to 3.8.2
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35868 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-04 08:43:55 +00:00
f6a61008f2
ar71xx: rework changes from r35840
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35865 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-03 21:59:34 +00:00
f90fa7f4b4
kernel: update linux 3.8 to 3.8.1
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35862 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-03 13:58:52 +00:00
2d55cfeda8
linux/3.8: add missing config symbols
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35861 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-03 13:58:10 +00:00
f4b2c62d60
kernel: update linux 3.7 to 3.7.10
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35860 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-03 13:57:40 +00:00
John Crispin
Steven Barth
Gabor Juhos
Felix Fietkau
Hauke Mehrtens
Florian Fainelli
Imre Kaloz
Luka Perkov