cb618e5c95
ar71xx: prebuild all loaders in Image/Prepare stage
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29878 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-24 09:47:22 +00:00
31ac2df946
ar71xx: build ALFA AP96 images with default profile as well
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29866 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-22 22:33:15 +00:00
c72cb530b3
ar71xx: change board id of the UniFi board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29849 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-22 13:51:50 +00:00
f9d78517ad
ar71xx: add a profile and build images for the TL-WR2543N/ND
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29682 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-07 19:36:42 +00:00
a128548072
ar71xx: add support for Redwave RW2458N
...
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29669 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-06 07:20:59 +00:00
df72f38897
ar71xx: create profile and build image for the ALFA AP96 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29663 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04 21:13:57 +00:00
5c8819fc34
ar71xx: specify console kernel parameter for the Compex boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29660 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04 17:30:59 +00:00
97682e0944
ar71xx: use the TL-MR3x20 code for the TL-WR841N/ND v7
...
These models are based on the AP99 reference board,
and uses the AR7241 SoC.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29658 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04 17:30:57 +00:00
e1cde7e2f2
ar71xx: add profile and build image for the TL-WA701N/ND boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29656 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04 17:30:54 +00:00
2526c08008
ar71xx: add support for TP-Link TL-MR3020
...
This patch adds support for the TP-Link device TL-MR3020 which is very
similiar to the TL-WR703N.
The TL-MR3020 uses 5 LEDs, 1 push button and a switch with 3 positions.
Only four LEDs can be controlled via GPIO. The power LED is connected to
the power supply.
The WPS push button has been mapped to KEY_WPS_BUTTON. The two GPIO signals
of the sliding switch have been mapped to BTN_0 and BTN_1.
I have also setup a wiki page with details here:
http://wiki.openwrt.org/toh/tp-link/tl-mr3020
USB is working and has been tested with USB mass storage and USB UMTS
stick.
Wifi also seems to work.
Ethernet is working too.
Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29651 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04 17:30:47 +00:00
70c438bb93
ar71xx: add profile and build factory image for the Hornet-UB board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29637 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-01 19:30:29 +00:00
c3f617ef35
ar71xx: build images for the ALFA Network N2/N5 boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29636 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-01 19:30:28 +00:00
b809bbc100
ar71xx: add support for the wzr-hp-g300nh2
...
Signed-off-by: Mark Deneen <mdeneen@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29567 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-18 22:20:17 +00:00
3894ae522a
ar71xx: use 64kraw template on more TP-Link boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29561 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-17 18:49:55 +00:00
1c234742d6
ar71xx: build images for TL-WR741N/ND v2
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29548 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15 22:03:48 +00:00
ac0030116e
ar71x: use raw squashfs images for TP-Link boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29547 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15 22:03:46 +00:00
178dfb1db9
ar71xx: create a template for using unpadded squashfs images
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29546 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15 22:03:45 +00:00
3b391aa04c
ar71xx: put squash image right after the kernel on TP-Link boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29545 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15 22:03:44 +00:00
97ebf387ba
ar71xx: build image for the Hornet-UB board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29536 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-14 20:54:11 +00:00
74dbf6c823
ar71xx: get rid of squashfs-4k images
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29522 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-13 20:41:24 +00:00
041a6265f8
ar71xx: Build images for Netgear WNDRMAC and WNDRMACv2
...
The WNDRMAC is a WNDR3700v2 (64MB RAM, 16MB flash) in a white case. The
WNDRMACv2 is a WNDR3800 (128MB RAM, 16MB flash) in a WNDRMAC case.
The WNDRMAC case doesn't have "holes" or labels for the 2.4GHz LED or
switch ports 2-4. The stock firmware uses a single LED (in the 5GHz
position) to indicate the status of both radios, and a single LED (in the
switch port 1 position) to indicate the status of all LAN ports. The
"missing" LEDs are present on the board, and easily shine through the
case. Unlike the stock firmware, OpenWrt will use these "hidden" LEDs.
I've tested the WNDRMACv2 image. I don't have a v1 WNDRMAC, but assume
that this is sufficient to build a fully-functional image.
Signed-off-by: Mark Mentovai <mark@moxienet.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29513 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-13 14:59:40 +00:00
589a8dfc24
ar71xx: fix WNDR3x00 factory image generation
...
Factory images for WNDR3700v2 and WNDR3800 should contain these model IDs
for the device: field in their DNI tags, not WNDR3700.
This regressed in r29434, which redid WNDR3x00 model detection. The sixth
parameter to Image/Build/Netgear is only used as the -B argument to
mkdniimg, which is used to set the device: field. In r29434, this was
erroneously changed to be WNDR3700 for all models. The tools to flash
factory images (U-Boot's TFTP server and the factory software's upgrade
utility) may refuse to honor images with incorrect device: fields in their
DNI tags.
Signed-off-by: Mark Mentovai <mark@moxienet.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29473 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-07 06:55:50 +00:00
4636ce7f8a
ar71xx: create firmware image for the TL-WR740N/ND v4 boards
...
Based on a patch by Cristian Deluxe <djcristiandeluxe@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29468 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-06 16:26:44 +00:00
33322c055c
ar71xx: use hw_id, hw_rev and flash_layout with mktplinkfw
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29467 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-06 16:26:43 +00:00
8244420b66
ar71xx: fix TL-MR3x20 profile names in image/Makefile
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29463 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-06 13:53:21 +00:00
554d2c4504
ar71xx: cleanup TP-Link profiles
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29461 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-06 10:29:25 +00:00
6356c4e99d
ar71xx: reclaim some unused space on TP-Link boards
...
With the default OpenWrt configuration, this increases the size
of the rootfs_data partition by 384KB/128KB on the older/newer
TP-Link models.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29447 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-05 14:52:36 +00:00
c9f52e0adc
ar71xx: use the lzma-loader on TP-Link boards w/o lzma support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29444 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-05 14:52:28 +00:00
037fc54211
ar71xx: add preliminary support for wzr-hp-g450h
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29441 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-05 14:20:51 +00:00
a86d2fb99b
ar71xx: rewrite WNDR3700/3800 handling
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29434 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-05 13:03:54 +00:00
32baf22378
ar71xx: allow WNDR3700 image creation to fail if kernel/rootfs too big
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29431 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-05 12:47:53 +00:00
c7c70fbb89
ar71xx: create initramfs images for the newer TP-Link boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29410 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-03 16:57:23 +00:00
0f72e36a61
ar71xx: reclaim unused space in WNDR3700/3800 images
...
Patch by: Mark Mentovai <mark@moxienet.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29406 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-03 16:33:38 +00:00
d55531f7b7
ar71xx: add a profile and build image for the OM2P board
...
[juhosg: the name of the final image has been changed to
'openwrt-ar71xx-generic-om2p-squashfs-factory.bin']
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29397 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-01 22:49:05 +00:00
897691c597
ar71xx: add support for Ubiquiti AirRouter
...
Signed-off-by: Gergely Barta <gergely.barta@printerfairkft.hu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29395 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-01 22:49:02 +00:00
dc19d51869
ar71xx: fix wndr3800 machine name
...
This fixes the machine name in /proc/cpuinfo and luci status page machine name.
Signed-off-by: Petri Rosenström <petri.rosenstrom@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29326 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-24 20:09:38 +00:00
1df32b6140
ar71xx: copy atheros initramfs images to the image directory
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29325 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-24 20:09:35 +00:00
f738f055b7
ar71xx: specify mtd layout in command line for the DB120 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29324 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-24 20:09:32 +00:00
c20327d5ff
ar71xx: change generated Buffalo firmware versions
...
With version 1.76 the upgrade may fail with newer Buffalo firmwares with
a message like this:
"You can not update the firmware because the firmware version is earlier
than 1.82. Please use 1.82 or later version for firmware update."
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28815 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-07 21:34:32 +00:00
5290614fac
ar71xx: fix WHR-HP-G300N firmware partition offset
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28810 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-07 20:24:57 +00:00
f56da26294
ar71xx: build image for the Buffalo WHR-HP-GN
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28806 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-07 12:59:11 +00:00
ca96dda8d8
ar71xx: build image for the Buffalo WHR-G301N
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28804 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-07 12:59:08 +00:00
c94b4af3dc
ar71xx: fix WHR-HP-G300N image generation
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28802 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-07 12:59:05 +00:00
561175c967
ar71xx: build image for the TL-WR741ND v4 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28708 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-01 11:20:55 +00:00
deb302d092
ar71xx: fix typos in image/Makefile
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28618 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-27 07:54:52 +00:00
dbebe488f6
ar71xx: create image for the WNDR3800
...
This adds support for the Netgear WNDR3800, it is almost the same as
the WNDR3700v2. It just has more RAM so the hd_id had to be adjusted.
Signed-off-by: Petri Rosenström <petri.rosenstrom@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28597 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-26 06:12:47 +00:00
249da9f193
ar71xx: build image for the Buffalo WHR-HP-G300N
...
Based on a patch by Yoichi Shinoda <shinoda@jaist.ac.jp>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28568 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-24 21:49:29 +00:00
4ac887fba4
ar71xx: build image for the Allnet ALL0258N board
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28565 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-24 21:49:23 +00:00
d72bf73228
ar71xx: build images for the TP-Link TL-WR703N v1 board
...
Based on a patch by dongyuqi <729650915@qq.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28279 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-09-21 11:47:56 +00:00
1d3825973d
ar71xx: create image for the TP-Link TL-WR743ND v1
...
Same hardware as WR741ND but with PoE support.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28271 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-09-21 11:47:44 +00:00
a3baa507eb
ar71xx: create image for the TP-Link TL-WR740N v3
...
Signed-off-by: Martin Raykov <martin.raykov@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28269 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-09-21 11:47:40 +00:00
e2789440a6
ar71xx: fix a copy&paste bug that broke wzr-hp-g300nh and wzr-hp-ag300h images ( #9918 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27950 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-08-10 22:24:56 +00:00
98b954f508
ar71xx: fix image generation
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27907 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-08-05 10:31:52 +00:00
084a24d146
ar71xx: cleanup image generation Makefile
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27899 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-08-04 19:41:16 +00:00
8ac7c93036
ar71xx: merge WZR-HP-G301NH support into WZR-HP-G300NH
...
Now that we can use a generic name for the switch there is no need for a
separate image for the WZR-HP-G301NH.
Update the default network config and remove the extra image.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27814 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-28 11:57:51 +00:00
59262ebdd5
ar71xx: build image for the AP121 boards with 4M of flash
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27523 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-07 13:01:50 +00:00
c02b10fb0e
ar71xx: fix building of squashfs images
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27446 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-04 12:10:03 +00:00
b56e4c784a
ar71xx: use 4k image only for the AP121 board
...
Create optimized 64K images with the new padjffs2 tool and use that
images instead of the 4k ones. The 4k images causes problems on devices
where the flash erase size is 64 KB.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27357 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-02 08:37:59 +00:00
d45f8cb7f6
ar71xx: add profile and image building code for wzr-hp-ag300h
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27076 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-01 02:23:30 +00:00
2ca6db7bcb
ar71xx: build images for the AP121 boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27070 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 22:53:47 +00:00
0518d27878
ar71xx: stop producing -NA factory images and tag factory images with hd_id for WNDR3700v2
...
NETGEAR doesnt produce a distinct North American image for
WNDR3700v2, they use the same image worldwide. This is a change from
earlier models such as WNDR3700 (v1). NETGEAR's v2 images now contain
an "hd_id" parameter, as well. All observed WNDR3700v2, WNDR3800, and
WNDRMAC images use 29763654+16+64 as their hd_id value.
This patch changes the OpenWrt WNDR3700v2 "factory" image generation
to stop producing the extraneous -NA version and to tag the image with
the same hd_id used in NETGEAR's images.
There is no change to WNDR3700 (v1) image generation, as NETGEAR
continues to produce distinct -NA and worldwide images, neither of
which are tagged with hd_id.
Signed-off-by: Mark Mentovai <mark@moxienet.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27053 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 22:53:25 +00:00
e0d562138a
ar71xx: create factory images for the WZR-HP-G30{0,1}NH boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27051 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 22:53:22 +00:00
208eb6ab2e
ar71xx: reduce the size of the squashfs-4k binaries
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27047 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 22:53:18 +00:00
29f15e70ca
ar71xx: don't hardcode console parameters in kernel config
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26605 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-12 13:14:53 +00:00
fa7cdb26c4
ar71xx: Add support for WZR-HP-G301NH
...
Add support for the Buffalo WZR-HP-G301NH. The only difference between it
and the WZR-HP-G00NH is that it has a RTL8366RB instead of a RTL8366S.
Since we don't do runtime detection of the switch, we need a separate
machine definition for it.
While we are at it, also rename the profile to reflect that it now is for
more than one device.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26601 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-12 09:29:10 +00:00
6730bea2b5
ar71xx: build firmware image for the Atheros DB120 board
...
Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26519 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-07 20:53:23 +00:00
27ed2a3713
[ar71xx] fix image generation in the Image Builder environment
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26271 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-22 18:56:55 +00:00
84f2d0b280
ar71xx: add support for the TP-Link TL-WA901ND v2 board
...
Patch-by: Jonathan Benett <jbscience87@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26119 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-13 15:08:31 +00:00
6bddd29b64
ar71xx: create firmware image for the WNDR3700v2 board
...
Patch-by: Mark Mentovai <mark@moxienet.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25119 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-26 20:35:44 +00:00
82107df8dd
ar71xx: rework WNDR3700 image generation
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24983 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-14 10:37:14 +00:00
2979eefbeb
ar71xx: build separate image for the WNDR3700 with NA region
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24982 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-14 10:37:11 +00:00
605dc51087
ar71xx: add support for TL-WR740N v1
...
Same as TL-WR741ND but with different hardware ID and without
detachable antenna.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24811 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-23 12:42:16 +00:00
5d0e74a393
ar71xx: add support for the jjPlus JA79PF
...
Patch-by: Cezary Jackiewicz
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24440 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-10 17:57:51 +00:00
11f383a3dc
ar71xx: add support for the TP-LINK TL-MR3220 v1 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24439 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-10 17:57:48 +00:00
35198fb766
ar71xx: do not throw compile errors if the nbg460n uboot is not selected
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24426 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-10 16:07:27 +00:00
b0c01de62d
ar71xx: add nbg460n image generation
...
This adds image generation for NBG460N/550N/550NH boards.
Signed-off-by: Michael Kurz <michi.kurz@googlemail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24419 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-10 15:17:03 +00:00
0ab7f53ebf
[ar71xx] add a new image for the TEW-652BRP which can be used with the bootloader recovery option
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24196 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-30 02:04:57 +00:00
73d6e3b181
[ar71xx] Add support for Ubiquiti UniFi AP
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23904 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-06 21:08:48 +00:00
ccc0817067
ar71xx: initial support for jjPlus JWAP003
...
Patch-by: Cezary Jackiewicz <cezary@eko.one.pl>
(the GPIODEV code has been removed, the sysfs interface
can be used to control the GPIO lines instead - juhosg)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23165 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-01 07:09:29 +00:00
4ce9fd3445
ar71xx: build firmware image for the TL-MR3420 v1 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23138 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-27 14:54:04 +00:00
4f4d6221a6
ar71xx: build firmware image for the TL-WR841N v7
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23134 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-27 14:53:54 +00:00
06d41d3a2d
Add support for Atheros AP96 reference board
...
This is still preliminary and not really tested much. Anyway, this
version seems to be enough to get both wired and wireless
interfaces working. Buttons and leds are also working.
mach-ap96.c is based on mach-wndr3700.c.
Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23125 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-27 08:59:53 +00:00
543c651b56
ar71xx: build firmware images for the Zcomax boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22884 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-03 18:14:43 +00:00
40134c73fc
ar71xx: add support for the tp-link tl-wa901nd devices (patch by Pieter "Fate" Hollants, from #7528 , without the ethernet fifo cfg values)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22353 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-22 12:37:44 +00:00
a069981ab9
ar71xx: add support for the Senao EAP7660D board
...
This patch adds support for the Senao EAP7660D board to trunk.
Signed-off-by: Daniel Golle <daniel.golle@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21837 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-06-18 16:22:05 +00:00
8c9776b550
ar71xx: build firmware images if Minimal profile is selected
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21684 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-06-06 17:41:39 +00:00
b7aa34d796
ar71xx: use the lzma kernel and a proper size limit for pb92
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21405 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-08 20:06:44 +00:00
555fafafd6
ar71xx: create separate 'factory' and 'sysupgrade' images for the Planex
...
boards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21175 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-26 18:28:10 +00:00
74b79f32db
ar71xx: build different firmware images for the DIR-825-Bx boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21171 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-26 18:27:58 +00:00
6e8078fb7f
ar71xx: create smaller sysupgrade images for the WRT400N board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21170 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-26 18:27:54 +00:00
8e9a9d267a
ar71xx: create firmware images for the TL-WR941ND v3 boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21169 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-26 18:27:51 +00:00
0656f01bd8
ar71xx: create separate 'factory' and 'sysupgrade' images for the WRT160NL
...
The 'factory' image requires the garbage at the end of the image.
Flashing from the original web interface does not work without that.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21168 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-26 18:27:47 +00:00
f4ab2a76d1
ar71xx: fix mtd_layout for the DIR-615-C1 and similar devices
...
* Thanks to Yury Polyanskiy for the report
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21036 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-20 08:07:25 +00:00
93c328b6ee
ar71xx: fix image builds (broken by r20834)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20840 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-13 18:01:46 +00:00
9d42bb1a21
define a shared IMG_PREFIX variable used as a basename for image files, it contains board & subtarget infos (if appropriate) allowing subtargets to share the same bin directory without overwriting each other's files
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20834 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-12 23:15:56 +00:00
79c06a8dc9
ar71xx: update image generation and trx header parsing for the WRT160NL
...
* patch by Bernhard Loos
* note: trailing whitespaces has been removed
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20525 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-27 17:38:36 +00:00
e25d743cc3
ar71xx: add images for pb92 - no kernel size check yet, lzma images did not yet work in my tests
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20496 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-26 22:36:02 +00:00
bb543b42c4
ar71xx: create smaller initramfs images for the TP-Link boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20414 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-25 07:31:13 +00:00
7e31015103
ar71xx: create separated and smaller sysupgrade files for the DIR-615 and similar boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20230 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-15 11:03:38 +00:00
7edaae7476
ar71xx: build firmware image for the Fry's FR-54RTR board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20229 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-15 11:03:36 +00:00
68c1341586
ar71xx: change DIR-600-A1 image generation template, will be usable for other boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20227 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-15 11:03:31 +00:00
a2672f48ce
ar71xx: create smaller sysupgrade files for the TP-Link boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20121 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-10 17:41:52 +00:00
e7896246fe
ar71xx: simplify WP543 image generation, and fix rootfs offset
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20063 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-08 15:32:48 +00:00
2e3338f599
ar71xx: increase kernel partition size for the WP543 boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20049 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-08 12:09:38 +00:00
61eb505889
ar71xx: create firmware images for the TL-WR941ND v4 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19749 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-02-19 11:52:33 +00:00
f1c22e0e26
ar71xx: create special initramfs images for the boards which does not accept standard uImages
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19245 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-20 13:26:24 +00:00
5c3ce30c1b
ar71xx: rename initramfs u-boot images
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19244 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-20 13:26:21 +00:00
378c7f7689
ar71xx: fix image generation for TL-WR741ND/TL-WR841ND-v5
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19230 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-19 18:27:57 +00:00
8ff92f31d9
ar71xx: create rescue image for the WZR-HP-G300NH
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19223 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-18 16:46:57 +00:00
764549aa54
ar71xx: fix portability errors in dd commands
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19207 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-18 00:12:15 +00:00
4f7f32a8c5
ar71xx: create sysupgrade file for the WZR-HP-G300NH
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19193 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-17 18:53:42 +00:00
c3b4131574
ar71xx: add support for the D-Link DIR-600 rev. A1 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19100 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-11 08:02:10 +00:00
3d21246af0
ar71xx: add missing flash partition for the DIR-825
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19075 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-08 13:35:25 +00:00
37bffc11ef
ar71xx: fix ubntxm image builds
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19044 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-05 18:37:22 +00:00
be3fb2440d
ar71xx: clean up image fs selection templates
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19034 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-04 16:27:41 +00:00
34e93d5dbe
ar71xx: add missing templates for PB4X image generation
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19033 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-04 14:28:31 +00:00
3322d3280a
ar71xx: fix generating pb4x images
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19029 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-04 11:54:58 +00:00
71831618f4
ar71xx: create firmware images for the AP81/PB42/PB44 boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19011 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-02 16:30:52 +00:00
059f8d5af3
ar71xx: simplify image generation a bit
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19010 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-02 16:30:49 +00:00
b49d4c7f2b
ar71xx: change firmware image name for th TP-Link boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18895 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-12-22 19:36:07 +00:00
e80ae1b19a
ar71xx: add support for the TL-WR841N v1.5 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18893 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-12-22 19:31:28 +00:00
efe27b1e69
ar71xx: fix WNDR3700 firmware images
...
WNDR3700's U-Boot loads the kernel from a squashfs image, and it does
not support squashfs 4.0.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18851 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-12-19 18:10:41 +00:00
c97b8e0db1
[target] ar71xx: fix WNDR3700 image generation
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18849 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-12-19 14:45:43 +00:00
4b565ddb06
ar71xx: separate DIR-615 rev. C1 support from the TEW-632 (based on the
...
patch from #6186 )
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18818 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-12-18 12:57:01 +00:00
00c14fd865
ar71xx: preliminary support for the TL-WR1043ND
...
Adds board support for the TP-Link TL-WR1043ND Based on the Atheros AP81 platform.
Presently the RTL8366RB switch support is missing due to no driver.
The ethernet works with 5 ports@1Gbit but is missing vlan support.
Hope Ive done this right, First time submiting a patch.
Signed-off-by: Andrew Tarabaras <andrew@advancedtechnologies.com.au>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18696 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-12-08 12:46:25 +00:00
f5523da72c
ar71xx: DIR-825 support cleanup
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18622 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-12-03 15:07:41 +00:00
2d6e859525
ar71xx: add support for the D-Link DIR-825 rev. B1 board (thanks to
...
ValXdater)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18621 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-12-03 15:07:34 +00:00
1ded01d88a
ar71xx: fix extension of the WNDR3700 firmware image
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18579 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-11-28 13:49:19 +00:00
5cd358eb5d
ar71xx: override mtd partitions for the TEW-632BRP family
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18578 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-11-28 13:49:17 +00:00
1c396a22fd
ar71xx: create images for the WNDR3700, which can be flashed via the factory web interface
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18571 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-11-28 09:28:25 +00:00
050ea33a0b
ar71xx: create sysupgrade image for the WNDR3700
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18570 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-11-28 08:25:56 +00:00
22dbc6d993
ar71xx: rename TL-WRx41 images, because newer factory web interface does
...
not accept files with '.uni' extension.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18535 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-11-25 10:28:30 +00:00
8c73f6a522
ar71xx: use MkImageLzma template for Ubiquiti XM devices
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18534 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-11-25 09:51:33 +00:00
ce7b62df3b
ar71xx: add sysupgrade support for Ubiquiti XM boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18533 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-11-25 09:51:31 +00:00
7b4990c9ec
ar71xx: create combined images for the RS, RS-PRO and LS-SR71 boards, and add sysupgrade support for them
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18531 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-11-25 09:51:25 +00:00
816fe4f2ae
ar71xx: dont't build images for Ubiquiti XM devices with the Madwifi profile
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18530 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-11-25 09:51:19 +00:00
f9f60dce00
ar71xx: the squashfs-4k images are unreliable in some builds. add 4k, 8k padding to the generic squashfs images and use them on 4k devices as well
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18526 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-11-24 13:55:40 +00:00
90ae6262a5
ar71xx: use 4k erase size images for ubnt xm
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18498 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-11-23 17:12:59 +00:00
2ac94fce03
ar71xx: build images for ubnt bullet-m, rocket-m and nano-m
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18451 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-11-18 18:10:37 +00:00
b6318c8ae6
ar71xx: add preliminary support for the TL-WR841ND v5 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18226 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-10-30 12:26:25 +00:00
298b4c1a81
ar71xx: simplify image generation
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18222 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-10-30 12:26:10 +00:00
9073d4dd1f
ar71xx: create firmware image for WP543 boards with 4/8/16MB of flash
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18075 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-10-19 08:07:40 +00:00
6bdd250acd
[ar71xx] create firmware image for the WRT160NL board (thanks to Gerry Rozema)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17151 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-08-06 19:07:47 +00:00
bc6f0d65c5
[ar71xx] fix firmware image of the TL-WR741ND
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16981 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-07-25 19:50:10 +00:00
15a2b273bf
[ar71xx] create firmware image for the wrt400n board (based on a patch by Sandeep Mistry <sandeep.mistry at gmail.com>)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16793 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-07-12 09:01:13 +00:00
322052f47a
[ar71xx] increase size of the kernel partition on the TEW-632BR board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16784 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-07-11 17:15:30 +00:00
857042ad8b
[ar71xx] create firmware image for the TL-WR741ND
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16741 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-07-07 19:58:39 +00:00
8ca5c4609e
[ar71xx] don't use the CRC header in the kernel partition on the WP543 board, so the kernel can be flashed directly from OpenWrt
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16560 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-25 13:48:21 +00:00
28e44dbadb
[ar71xx] create jffs2 images
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16374 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-07 20:07:32 +00:00
9658891c8a
[ar71xx] build images for the AP83 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16357 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-06 13:02:25 +00:00
988e7d96da
[ar71xx] build firmware image for the MZK-W300NH board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16342 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-04 19:14:46 +00:00
2499202417
[ar71xx] create firmware image for the RouterStation Pro, and add a profile for it (patch by Ubiquiti Networks)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16066 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-05-25 17:52:12 +00:00
0253bca788
[ar71xx] create image for the WRT400N board (thanks to netprince)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15828 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-05-13 20:00:42 +00:00
0cc8ca5d92
[ar71xx] create firmware image for the TL-WR841ND v3 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15024 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-24 16:11:50 +00:00
c77724d127
[ar71xx] create firmware image for the Ubiquiti LS-SR71 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14874 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-14 13:25:49 +00:00
8a7f97776d
[ar71xx] build firmware image for the Atlantis-Land A02-RB-W300N
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14711 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-01 11:50:05 +00:00
8aab5a30b6
[ar71xx] tl-wr941nd: rename firmware image
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14710 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-01 11:36:49 +00:00
d444b0b7cb
[ar71xx] tew-632brp: increase the size of rootfs partition, and build one unified firmware image only
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14709 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-01 11:17:16 +00:00
fbba8d8743
[ar71xx] move madwifi driver into a separate profile, and add hostapd-mini for the devices based on the ar913x
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14694 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-02-28 18:47:43 +00:00
0a88a341f2
[ar71xx] add initial profiles
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14693 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-02-28 17:47:33 +00:00
7a4e671872
[ar71xx] generate firmware image for the TL-WR941ND device
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14674 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-02-26 17:02:28 +00:00
94b82d5369
[ar71xx/atheros] include revision number in Ubiquity images
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14574 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-02-20 10:19:24 +00:00
44499f6e85
[ar71xx] create firmware images for the Planex MZK-W04NU board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14413 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-02-05 16:46:55 +00:00
d3363225bd
[ar71xx] fix UBNT-RS image generation
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14251 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-01-28 20:55:59 +00:00
8dbd855958
[ar71xx] fix Ubiquiti RouterStation images
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14144 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-01-22 07:35:05 +00:00
58a5af0afd
[ar71xx] don't generate too large firmware images for the TEW-6x2BRP boards, they may brick the board
...
* reported by RoundSparrow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13878 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-01-05 20:18:09 +00:00
0e14d8982c
[ar71xx] generate firmware image for the Ubiquiti RouterStation board (based on a patch by Jonas <jmajau at ubnt.com>)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13758 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-12-29 10:34:19 +00:00
7db08554bb
[ar71xx] generate firmware image for the D-Link DIR-615 C1 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13755 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-12-28 10:26:42 +00:00
b902199d3e
[ar71xx] generate firmware image for the TEW-652BRP board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13672 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-12-17 08:00:22 +00:00
432f440550
[ar71xx] tew-632brp: use LZMA compressed uImage
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13645 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-12-15 08:32:04 +00:00
51175b4850
[ar71xx] generate firmware image for the TEW-632BRP board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13634 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-12-14 20:21:36 +00:00
0ca01f7bdc
[ar71xx] use MyLoader partition parser on the WP543 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13265 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-11-17 17:42:35 +00:00
a4ce16d049
allow the mkmylofw command to fail in case the image is too big for some compex devices
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@12964 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-10-13 15:35:23 +00:00
bf66396df3
[ar71xx] create firmware image for the WP543 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@12628 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-09-18 13:36:31 +00:00
02e21c951c
[ar71xx] build more image types
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@12545 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-09-07 13:28:07 +00:00
a0881502d5
add a gzipped uImage for ar71xx
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@12453 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-09-01 11:04:08 +00:00
7670811acd
surprise :p
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11894 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-07-21 17:08:14 +00:00
Gabor Juhos
Felix Fietkau
Jonas Gorski
Jo-Philipp Wich
Claudio Mignanti
Nicolas Thill
Florian Fainelli