a21ef1e86d
ep93xx: add support for 3.3
...
Compile tested only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31895 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:21 +00:00
47555ae06c
au1000: remove 3.2 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31894 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:18 +00:00
480346bdcb
au1000: switch to 3.3 and add broken flag
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31893 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:17 +00:00
854bea7e28
au1000: add support for 3.3
...
Compile tested only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31892 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:15 +00:00
827fdc608c
linux/3.1: R.I.P.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31891 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:09 +00:00
8aea17b6d8
omap24xx: remove 3.1 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31890 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:07 +00:00
77cd6a37fe
omap24xx: switch to 3.3 and add broken flag
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31889 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:05 +00:00
cbc3cd7b0e
cns3xxx: remove 3.1 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31888 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:03 +00:00
9853f97374
cns3xxx: switch to 3.3 and add broken flag
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31887 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:02 +00:00
489514ce70
kernel: add a few patches for avoiding unnecessary skb reallocations - significantly improves ethernet<->wireless performance with mac80211 based drivers
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31886 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 14:43:58 +00:00
b93700be90
bcm63xx: build images for DSL-274XB revision F1
...
Build images for D-Link DSL-274XB revision F1. Flashing
through original web UI as well as CFE works.
Known issues:
* wifi led inverted (on when wifi is off and vice cersa)
* same issues as generic bcm6328 support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31885 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:51 +00:00
e4a82f8318
bcm63xx: add ath9k to atheros wifi profile
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31884 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:48 +00:00
2df17dbf20
bcm63xx: enable bcm6328 support and required drivers
...
BCM6328 support is in a usable state, with the following issues
* internal switch port not configurable
* external phys not supported
* broadcom wifis will probably not work correctly
* and all other generic bcm63xx issues (so yes, still no ADSL)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31883 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:46 +00:00
20cab203ed
bcm63xx: add support for DSL-274XB rev F1
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31882 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:43 +00:00
58de534f18
bcm63xx: fix port state after network down
...
bcm_enetsw_probe did not properly reset port states, resulting in
connected ports staying disabled after bringing up the interface the
second time.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31881 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:40 +00:00
9a873721da
bcm63xx: add a fixup for ath9k devices
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31880 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:37 +00:00
96ef7778af
bcm63xx: add support for the HSSPI controller
...
Add support for the HSSPI controller found on bcm6328 and SPI attached
flash.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31879 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:33 +00:00
5b950415b8
bcm63xx: add preliminary support for bcm6328
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31878 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:29 +00:00
bf8af3c6f2
bcm63xx: add flash type detection
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31877 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:25 +00:00
afb39de7d0
bcm63xx: pad Speedport W303 V images to 4 MiB
...
Prevents CFE from flashing to the second image offset. Fix up the rootfs
length on first boot else CFE will complain.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31876 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:22 +00:00
4ecf7d09a1
bcm63xx: add a default switch configuration for DSL-274XB
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31874 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:17 +00:00
4abdddf848
bcm63xx: setup network config through uci-defaults
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31873 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:14 +00:00
6082cee9d6
bcm63xx: move the board name workaround to /lib/brcm63xx.sh
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31872 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:11 +00:00
1148159a4f
bcm63xx: use the exact board id as board identification string
...
No need to keep the bcm63xx/ at the start or the chipid info at the end.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31871 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:08 +00:00
0b257a6c10
kernel: fix a warning in the connmark module
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31856 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-24 18:25:08 +00:00
e100214e23
kernel: update linux 3.3 to 3.3.7
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31848 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-23 21:05:32 +00:00
0730d9fbb8
ar71xx: fix an insignificant typo
...
Patch from #11485 .
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31847 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-23 21:05:30 +00:00
3412f35035
ar71xx: fix WLAN led for RB751U-2HnD and RB751G-2HnD
...
Patch by Kamil Trzciński <ayufan@osk-net.pl>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31846 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-23 21:05:25 +00:00
d9f7205aa4
ar71xx: add support for TP-Link TL-MR3040
...
Support for TP-Link TL-MR3040. Power LED not working - always on red, after
start should be green.
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31845 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-23 21:05:24 +00:00
db37661614
ramips: Add byte queue limits support to net/ethernet/ramips_main.c
...
Add byte queue limits support to net/ethernet/ramips_main.c
"Byte queue limits are a mechanism to limit the size of the transmit
hardware queue on a NIC by number of bytes. The goal of these byte
limits is too reduce latency (HOL blocking) caused by excessive
queuing in hardware (aka buffer bloat) without sacrificing
throughput."
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31844 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-23 21:05:23 +00:00
713c364289
ramips: Enable sysupgrade for Sitecom WL-351
...
Sysupgrade works just fine on my Sitecom WL-351 after adding this
oneliner.
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31843 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-23 21:05:22 +00:00
831c677efc
linux/3.3: avoid recursive calling of mtd_writev in the block2mtd driver
...
Should fix #11513 . Tested with the x86/generic squashfs image within a VM.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31841 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-23 21:05:19 +00:00
192dbdd2f5
lantiq: allow platforms with rt2x00 to override the mac address without overriding eeprom, fixes bogus wlan mac address on arv4520
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31835 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-20 21:58:03 +00:00
b21bdefb82
kernel: merge a net-next fq_codel backlog handling fix
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31813 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 22:12:15 +00:00
bfdcb53577
omap24xx: add support for 3.3
...
Compile tested only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31810 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 20:22:32 +00:00
020b994103
cns3xxx: add support for 3.3
...
Compile tested only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31809 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 20:10:53 +00:00
67ea71e397
linux/2.6.39: R.I.P.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31808 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 20:10:51 +00:00
e738b2550a
cns3xxx: sync kernel config
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31807 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 20:10:48 +00:00
a24db87f22
cns3xxx: remove 2.6.39 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31806 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 20:10:46 +00:00
07e53bcad1
cns3xxx: switch to 3.1
...
Compile tested only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31805 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 20:10:44 +00:00
b7b3fce329
x86: remove support for old kernels
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31804 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 20:10:42 +00:00
7503ab47c1
x86: remove subtarget specific LINUX_VERSION overrides
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31803 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 20:10:38 +00:00
a5c66329a0
x86/ep80579: switch to 3.3
...
Also fix build errors in the ep80579-drivers package.
Compile tested only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31802 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 20:10:33 +00:00
6a07b477c0
brcm47xx: fix nvram read out on devices with serial flash
...
detect nvram on Linksys E3200
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31790 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 16:04:10 +00:00
1dd74eea6b
brcm47xx: bcma: fix null pointer
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31789 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 15:46:30 +00:00
972c918b16
brcm47xx: ssb: recognize ARM Cortex M3
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31788 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 15:45:51 +00:00
fd3e6d0687
brcm47xx: some fixes for the USB driver
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31787 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 15:44:25 +00:00
111aa40027
cobalt: remove 2.6.39 specific patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31785 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 09:59:22 +00:00
715476a93a
x86/olpc: switch to 3.3
...
Compile tested only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31784 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 09:57:32 +00:00
0a3596481b
x86: image: select bootscript images by default for OLPC
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31783 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 09:57:29 +00:00
2a0cc9a89b
adm5120: add missing config symbols for the rb1xx subtarget, fixes #11407
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31781 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-17 21:20:23 +00:00
06370f57c1
kernel: add some missing config options added by r31756
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31774 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-17 13:28:30 +00:00
f9cfc0fd4a
kernel: ssb/bcma: update to version from wireless-testing tag master-2012-05-16-2
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31772 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-17 13:22:38 +00:00
20de9681f0
brcm47xx: remove support for kernel 3.2
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31771 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-17 13:20:10 +00:00
bee7068b92
x86/thincan: switch to 3.3
...
Compile tested only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31765 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-17 06:41:01 +00:00
6cfdf98882
x86/xen_domu: switch to 3.3
...
Compile tested only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31764 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-17 06:41:00 +00:00
dec6db1eb1
x86/kvm_guest: switch to 3.3
...
Compile tested only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31763 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-17 06:40:58 +00:00
34e5c69695
x86/generic: switch to 3.3
...
Compile tested only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31762 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-17 06:40:56 +00:00
0c6a3e365f
kernel: add codel and fq_codel to generic 3.3 patch set (based on patch by Dave Täht)
...
Codel is a new AQM algorithm and RED replacement designed by
Kathie Nichols and Van Jacobson, and published in ACM queue:
http://queue.acm.org/detail.cfm?id=2209336
Codel stands for "Controlled Delay", and needs no knobs in the
general case, twiddled, for optimum results. It aims for 5ms of
delay, at most, when in use.
Additionally,
fq_codel (by eric dumazet) builds on codel to provide fair queuing
superior to what could be had with SFQ, and drop behavior saner
than RED, BLUE, or choke.
These patches are backported from net-next and are known to work
on Linux 3.3.4 and later.
Includes updates to codel for better portability and speed
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31756 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-16 15:23:03 +00:00
c3340cff15
x86/alix2: switch to 3.3
...
Compile tested only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31753 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-16 10:45:02 +00:00
d65bd1499c
x86/net5501: switch to 3.3
...
Compile tested only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31752 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-16 10:44:59 +00:00
6c0225b8c5
x86: sync 3.3 configs
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31751 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-16 10:44:55 +00:00
3345e73573
x86: sync 3.2 configs
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31750 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-16 10:44:52 +00:00
8ace34552a
x86: sync 2.6.39 configs
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31749 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-16 10:44:49 +00:00
4cd69e320c
linux/3.3: add missing symbol
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31748 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-16 10:44:46 +00:00
880547fc5a
linux: add CONFIG_POWER_SUPPLY_DEBUG symbol
...
It was missing in the previous commit.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31738 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-15 11:12:31 +00:00
cb4c118e50
linux: move certain disabled symbols to the generic configs
...
* CONFIG_ARCH_DMA_ADDR_T_64BIT
* CONFIG_ARCH_HAS_ILOG2_U32
* CONFIG_ARCH_HAS_ILOG2_U64
* CONFIG_ARCH_PHYS_ADDR_T_64BIT
* CONFIG_ARCH_SUPPORTS_MSI
* CONFIG_GENERIC_CPU_DEVICES
* CONFIG_HWMON_DEBUG_CHIP
* CONFIG_I2C_PXA_PCI
* CONFIG_LEDS_GPIO
* CONFIG_MINIX_FS_NATIVE_ENDIAN
* CONFIG_MLX4_CORE
* CONFIG_POWER_SUPPLY
* CONFIG_POWER_SUPPLY_DEBUG
* CONFIG_QUOTACTL
* CONFIG_SDIO_UART
* CONFIG_SENSORS_K10TEMP
* CONFIG_SENSORS_SCH56XX_COMMON
* CONFIG_SENSORS_VIA_CPUTEMP
* CONFIG_SERIO_AMBAKMI
* CONFIG_SERIO_I8042
* CONFIG_SERIO_LIBPS2
* CONFIG_SERIO_PCIPS2
* CONFIG_SERIO_RAW
* CONFIG_SERIO_SERPORT
* CONFIG_SPI_BITBANG
* CONFIG_SPI_GPIO
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31737 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-15 10:58:52 +00:00
f47ed77684
ar71xx: remove AG71XX_RX_PKT_RESERVE, it is no longer necessary (found by Eric Dumazet)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31736 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-15 10:36:39 +00:00
e6d50dae72
[lantiq] code style cleanup of the mach files
...
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31735 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-15 09:38:05 +00:00
499d5b1ca6
[lantiq] adds zyxel p2601hnfx support
...
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31734 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-15 09:38:02 +00:00
d92ae2699f
[lantiq] set 3.3.6 as default
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31733 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-15 09:37:59 +00:00
27cb15eccd
[lantiq] set 3.3.5 as default
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31718 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-14 16:11:26 +00:00
9391118ede
linux/3.0: R.I.P.
...
It is used by the broken omap35xx/gumstix target only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31717 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-14 15:48:34 +00:00
bd604be582
realview: remove 3.0 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31716 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-14 15:48:32 +00:00
67e61e5edf
realview: switch to 3.3
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31715 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-14 15:48:31 +00:00
0c668d6c68
realview: add 3.3 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31714 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-14 15:48:29 +00:00
8e347885d6
linux/3.3: more missing config symbols
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31713 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-14 15:48:23 +00:00
b2a6c43e1c
kernel: add CONFIG_BLK_DEV_PCIESSD_MTIP32XX
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31710 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-14 11:28:02 +00:00
cc87185921
kernel: update linux 3.3 to 3.3.6
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31709 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-14 09:18:32 +00:00
4472c6f51b
amazon: fix section mismatch
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31707 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-13 15:31:42 +00:00
e46bb17d6e
amazon: update amazon target to kernel 3.3
...
This is just compile tested, my device is currently not working.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31706 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-13 15:10:40 +00:00
99ceef899c
gemini: remove 2.6.37 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31700 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-13 12:04:04 +00:00
7ae260dc28
gemini: switch to 3.3
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31699 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-13 12:04:02 +00:00
4cf665e402
gemini: add support for 3.3
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31698 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-13 12:03:59 +00:00
1461937650
brcm47xx: generate image for Linksys WRT610N V1
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31696 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-13 00:16:57 +00:00
2181299b7e
kernel: ssb: add PCI IDs 0x4322 and 43222
...
The 0x4322 ID is found on the BCM4322 used on some SoCs like the
Linksys WRT610N V1 connected to a BCM4705. The 43222 (0xa8d6) ID
is found on the BCM43222 used on some other SoCs like the D-Link
DSL-2760U connected to a BCM63xx.
This fixes #10887 .
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31695 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-13 00:08:12 +00:00
08340bafd5
brcm47xx: fix tg3 ssb patch
...
Now tg3 works with the Ethernet core of the Linksys WRT610N v1 (again).
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31694 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-12 23:59:12 +00:00
88cd79159b
linux/2.6.38: R.I.P.
...
It is used only by the broken coldfire target.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31688 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-12 12:05:21 +00:00
3d65e0831f
linux/2.6.37: R.I.P.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31687 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-12 12:05:19 +00:00
fd1880e698
linux: add broken flag to remaining targets which are using 2.6.37
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31686 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-12 12:05:18 +00:00
c7f8133c34
iop32x: remove 2.6.37 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31685 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-12 10:49:36 +00:00
d3cf426cc1
iop32x: switch to 3.3
...
It is compile tested only, so add a broken flag.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31684 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-12 10:49:34 +00:00
5ff6d685c6
iop32x: add 3.3 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31683 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-12 10:49:32 +00:00
d6e36e0c43
sibyte: remove 2.6.37 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31682 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-12 10:49:30 +00:00
e3ba37da26
sibyte: switch to 3.3
...
It is compile tested only, so add a broken flag.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31681 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-12 10:49:28 +00:00
cbc9541ba9
sibyte: add 3.3 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31680 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-12 10:49:26 +00:00
c267904494
ixp4xx: fix ixp4xx_crypto build error
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31679 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-12 10:49:23 +00:00
695f59cd2c
orion: remove the broken broken flag
...
It is working on the Linksys WRT350N v2 at least:
http://pastebin.com/KCAbJZs9
Additionally, the flag was added to a wrong place
so it had no effect.
Thanks to StrikerNL for testing.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31674 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-10 20:20:43 +00:00
61a2f3d923
kirkwood: fix Kconfig symbol for NSA-310
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31673 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-09 16:16:52 +00:00
5c60980c61
[lantiq] Add 3.3 config files
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31672 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-09 12:52:24 +00:00
be7f324d5e
[lantiq] Add missing 3.3 patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31671 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-09 12:52:21 +00:00
f18079cbc3
[lantiq] Drop 2.6.32 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31670 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-09 12:52:19 +00:00
1ce55fe17c
kirkwood: add support for the ZyXEL NSA-310
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31669 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-09 11:38:43 +00:00
bc11434d61
kirkwood: add RaidSonic ICY BOX IB-NAS62x0 board support
...
Based on a patch by Luka Perkov <openwrt@lukaperkov.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31668 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-09 11:38:41 +00:00
a40ecd9d77
kirkwood: enable GPIO sysfs interface
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31667 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-09 11:38:40 +00:00
805c1e8753
kirkwood: nuke 2.6.37 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31666 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-09 11:38:39 +00:00
ceffa3f2e6
kirkwood: switch to 3.3
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31665 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-09 11:38:37 +00:00
88b4390432
kirkwood: add 3.3 support
...
Based on the 3.2.9 patches by Luka Perkov <openwrt@lukaperkov.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31664 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-09 11:38:36 +00:00
b3dac4fb22
ixp4xx: nuke 2.6.37 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31663 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-09 10:48:44 +00:00
4e77290627
ixp4xx: switch to 3.3
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31662 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-09 10:48:43 +00:00
dda432db43
mpc85xx: remove 2.6.38 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31661 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-09 10:48:41 +00:00
d9b357ca96
mpc85xx: switch to 3.3 and add broken flag
...
It is compile tested only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31660 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-09 10:48:39 +00:00
b7bb9d33b6
orion: nuke 3.0 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31659 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-09 10:48:38 +00:00
f59f32385f
orion: switch to 3.3 and add broken flag
...
It is compile tested only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31658 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-09 10:48:37 +00:00
090afbf663
linux/3.3: add missing RTC symbol
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31654 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-09 10:48:30 +00:00
6f83a7bcb2
ar71xx: fix build error if PCI is disabled
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31646 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-07 21:16:22 +00:00
3303e79b79
kernel: update linux 3.3 to 3.3.5
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31645 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-07 20:11:43 +00:00
4a6a77ad8b
pxa: remove 2.6.37 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31643 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-07 17:40:15 +00:00
bab1f8af42
pxa: switch to 3.3 and mark it as broken
...
It is working in qemu, but it has not been tested on real hardware.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31642 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-07 17:40:09 +00:00
6509d0f6a0
pxa: add support for 3.3
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31641 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-07 17:40:06 +00:00
94808b59b4
atheros: Fix compilation
...
With our recent switch to the 3.3 kernel target, some headers were
occidentally omitted.
Signed-off-by: Jonathan Bither <jonbither@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31640 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-07 17:06:39 +00:00
8336cde37f
bcm63xx: fix a race between PCI bus scan and fallback sprom registration
...
The fallback sprom handler was installed too late, resulting in ssb
failing to get a valid sprom on some devices.
Fixes #11384 .
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31638 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-06 21:25:34 +00:00
f20d1938b5
kernel: rewrite the phy packet hook, put it in the network stack to avoid having to keep non-upstream ethernet driver changes
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31637 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-06 21:19:14 +00:00
7432f7b3e8
brcm47xx: add gpio_request_one()
...
This fixes a compile error with kernel 3.3.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31635 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-06 20:44:37 +00:00
72fd178aa2
atheros: clean up the patches some more
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31626 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-06 17:15:00 +00:00
ee9f3b6a3c
atheros: update to 3.3.4 (based on work by acoul), fix mvswitch driver for newer kernels
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31625 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-06 17:08:30 +00:00
2e8211d607
AR7: don't mark as broken
...
Linux 3.3.4 boots fine on my AR7 device.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31623 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-06 14:04:19 +00:00
817b19be29
ar7: remove 2.6.37 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31617 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05 17:32:43 +00:00
7bf954fcec
ar7: switch to 3.3 and mark the target as broken
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31616 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05 17:32:41 +00:00
7b3873c7fb
ar7: add 3.3 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31615 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05 17:32:39 +00:00
2034dd105a
ar7: fix kernel_entry extraction
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31614 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05 17:32:36 +00:00
5b7d0a95c8
ar71xx: add profile and build image for the TL-WR1041N v2 board
...
Patch-by: Vince Huang <axishero@foxmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31610 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05 17:02:41 +00:00
b373fefee9
ar71xx: add support for the TP-Link TL-WR1041N v2 board
...
Patch-by: Vince Huang <axishero@foxmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31608 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05 17:02:35 +00:00
9f2ec6e9f6
ar71xx: update 3.3 patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31602 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05 13:56:35 +00:00
b56c425713
ar71xx: fix a typo in the db120 mach file
...
Reported-by: Sven Eckelmann <sven@narfation.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31601 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05 13:56:30 +00:00
8af7dd959a
brcm47xx: update target to kernel 3.3
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31599 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05 12:53:37 +00:00
3a416fef4f
linux/2.6.32: R.I.P.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31597 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05 11:43:34 +00:00
c52b8023cf
rdc: remove 2.6.32 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31596 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05 11:43:32 +00:00
c31d5201a9
rdc: switch to 3.3 and mark the target as broken
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31595 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05 11:43:30 +00:00
7e4d9c944d
rb532: remove 2.6.32 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31594 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05 11:43:29 +00:00
878d24135e
rb532: switch to 3.3 and mark the target broken
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31593 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05 11:43:26 +00:00
0d82b63788
rb532: add 3.3 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31592 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05 11:43:23 +00:00
b6e9dc210c
mpc83xx: remove broken flag
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31591 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05 11:43:21 +00:00
01084da42d
mpc83xx: populate network config from an uci-default script
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31590 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05 11:43:19 +00:00
446881548b
mpc83xx: cleanup rb333.dts
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31589 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05 11:43:16 +00:00
fd44e29d33
mpc83xx: fix MAC addresses on the RB333
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31588 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05 11:43:13 +00:00
22743ef943
mpc83xx: fix build warnings in RB333/600 dtb wrappers
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31587 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05 11:43:10 +00:00
dda43ef81e
linux/2.6.32: fix layer7 patch
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31586 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05 07:20:13 +00:00
9db9f75c47
[omap4]: upgrade to 3.3, enable framebuffer
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31576 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-03 21:51:58 +00:00
dc7a519585
adm5120: add missing NULL terminator to partition parser list
...
Fixes #11372 .
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31574 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-03 21:03:50 +00:00
a56ea99b6d
brcm47xx: add support for kernel 3.3
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31573 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-03 20:18:41 +00:00
7f4625bd8c
Fix iptables abuse of kernel header files. Use exported headers instead.
...
[juhosg: export xt_layer7.h for all kernel versions]
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31566 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-03 09:43:10 +00:00
dab41fab68
ramips: W306R V2.0 - GPIO and Network fixes
...
Fixed: GPIO typos and confirmed GPIO_BUTTON_RESET
Fixed: Lan & Wan reversed: swaped "eth0.2" with "eth0.1" by
removing a line(default is correct), and reversed the
Lan/wan layout LLLLW to WLLLL.
Added: image/Makefile now builds -factory.bin files. I am
unsure of the accepted way to change the makefile but
the name of the image needs to be 'linkn Kernel Image'
in order to be accepted by the OEM firmware.
Known issue: eth0 (internal switch i think has mac address:
00:11:22:33:44:55 but i think it should be same as
the lan).
Known issue: Pressing the reset button has no noticable effect,
i would expect the router to boot failsafe if being
pressed on boot, reboot if short press and reset all
to default if long press.
[juhosg: remove mtdlayout_W306R and use mtdlayout_4M instead]
Signed-off-by: David Pearce <david_18051985@hotmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31557 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-02 19:17:59 +00:00
a246e32c0d
ramips: Make serial console for DIR-300-B1 work again
...
Make serial console for DIR-300-B1 work again.
With some recent change, "console=ttyS1,57600" was removed from the
default kernel command line, this adds the necessary mkcmdline
incantation to image/Makefile to add it there for this target.
This is quite likely broken for other targets as well.
Without this the console switches to ttyS0 instead of ttyS1 and
kernel output is missing, and the userspace comes up with 9600 baud
instead of 57600.
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31556 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-02 19:17:58 +00:00
fa0ed4d09c
mpc83xx: remove 2.6.36 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31555 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-02 18:27:26 +00:00
b0d93742c9
mpc83xx: switch to 3.3
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31554 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-02 18:27:25 +00:00
e3f47b22e7
mpc83xx: add support for 3.3
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31553 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-02 18:27:22 +00:00
918f2e287c
linux/3.3: add more missing symbols
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31552 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-02 18:27:19 +00:00
a9d023be01
[brcm63xx] use a define for the poll and debounce interval
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31550 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-02 15:40:26 +00:00
8bf403c6f9
linux/3.3: add more missing symbols
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31548 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-01 08:00:26 +00:00
0be01c2456
move CONFIG_BOOKE_WDT_DEFAULT_TIMEOUT to the target configs
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31547 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-01 08:00:25 +00:00
9d2b3add2a
[coldfire]: switch to 2.6.38
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31546 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-01 07:00:17 +00:00
465b2a024c
kernel: update linux 3.3 to 3.3.4
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31541 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-30 08:38:11 +00:00
2341f7444d
linux: rtl836x: add a generic reset_switch function
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31536 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 18:29:31 +00:00
bd9308390c
linux: rtl836x: rename rtl836*_hw_init to rtl836*_setup
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31535 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 18:29:29 +00:00
b29026e34d
linux: rtl836x: add a reset_chip callback to rtl8366_smi_ops
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31534 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 18:29:26 +00:00
01bea635cb
ar71xx: allow to disable link polling on unused PHYs
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31533 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 18:29:24 +00:00
ca5d892a23
rb532: remove 2.6.35 support
...
The generic 2.6.35 support has been remove long time ago.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31532 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 16:56:07 +00:00
8f2556fba2
linux/3.3: refresh patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31531 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 16:56:03 +00:00
9d5f7f2b3f
rdc: add 3.3 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31530 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 15:59:49 +00:00
a5e8ad777f
mpc85xx: add support for 3.3
...
Based on a patch by Wojciech Dubowik <Wojciech.Dubowik@neratec.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31529 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 15:55:28 +00:00
4528485723
orion: add 3.3 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31528 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 15:20:40 +00:00
fc25550f74
linux/3.3: yet another missing symbol
...
Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31527 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 15:08:24 +00:00
223e587e83
linux/3.3: add support for the Pericom PT7C4338 I2C RTC chip
...
Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31525 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 15:08:22 +00:00
5b31bbd719
mpc85xx: add kmod-booke-wdt to the default packages
...
Based on a patch by Wojciech Dubowik <Wojciech.Dubowik@neratec.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31523 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 15:00:38 +00:00
9f03b39d07
mpc85xx: don't override CONFIG_WATHCDOG
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31521 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 15:00:36 +00:00
d7df86f4a9
linux: move CONFIG_BOOKE_WDT to the generic config
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31520 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 15:00:34 +00:00
5613414b3d
linux/2.6.36: R.I.P.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31519 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 15:00:33 +00:00
2c96c72068
linux: add broken flag to targets which are using 2.6.36
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31518 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 15:00:32 +00:00
082ed7a614
adm5120: create a new subtarget for the RB1xx devices
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31513 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 07:36:46 +00:00
1760493c18
adm5120: share a common kernel config between the subtargets
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31512 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 07:36:44 +00:00
0c2c450f24
adm5120: merge 3.3 patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31511 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 07:36:43 +00:00
d5cd0a15d4
adm5120: remove 2.6.32 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31510 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 07:36:37 +00:00
5f4e66bbef
adm5120: switch to 3.3.3
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31509 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 07:36:36 +00:00
566114524e
adm5120: fix macronix bootloc patch
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31508 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 07:36:35 +00:00
292dd8196f
ramips: rt305x: extract wifi eeprom and use the 8M template for the UR-336UN
...
Patch-by: Lebedev Dmitry <lebedev@trendnet.ru>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31507 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29 07:36:33 +00:00
2181972fae
adm8668: merge 3.3 fixes
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31497 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-28 10:41:43 +00:00
ccc459af62
adm8668: nuke 2.6.36 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31496 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-28 10:39:47 +00:00
e04cac52f9
adm8668: switch to 3.3
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31495 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-28 10:38:53 +00:00
7466f87cc1
[brcm63xx] switch to gpio-keys-polled
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31491 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-27 16:44:48 +00:00
d50a36d625
linux/3.3: yet another missing symbol
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31488 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-27 06:31:43 +00:00
42f83d2e57
brcm47xx: BCMA - Modified PCI CFG space access
...
The existing code (prior to the patch) does an "ioremap_nocache" on a
subset of a memory region that I think has already been mapped, and then
un-maps that smaller region when it is finished.
Thanks Nathan Hintz for the patch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31481 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-25 20:32:17 +00:00
ef1b10d0f1
adm8668: add support for 3.3
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31480 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-25 18:53:49 +00:00
af3ff2e7b6
adm8668: build gzip compressed uImage for testing
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31479 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-25 18:53:48 +00:00
999e94b5d9
adm8668: use a suffix for initramfs images
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31478 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-25 18:53:46 +00:00
7a2e03f5e3
ar71xx: enable MIB counters in the built-in switch of the AR934x
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31476 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-25 13:02:11 +00:00
c49fa68f6e
adm5120: remove 2.6.38 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31475 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-25 12:57:35 +00:00
e1a582c1ce
adm5120: add 3.3 support
...
Partially based on the 3.1 patches by Hartmut Knaack <knaack.h [at] gmx.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31474 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-25 12:57:33 +00:00
0965fa8af6
linux/3.3: fix compiler warnings in the plat_nand driver
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31473 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-25 12:57:29 +00:00
949ba90900
adm5120: make 5GXi depends on CPU_LITTLE_ENDIAN
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31472 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-25 12:57:26 +00:00
e6eed565e3
brcm47xx: A couple of other (inconsequential) BCMA patches
...
Noticed these while reviewing the code.
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31471 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-24 21:56:42 +00:00
ec90781175
brcm47xx: b44 fix workaround detection on some brcm47xx boards
...
Because of api change of nvram_getenv, the workaround failed to detect the hardware.
Based on patch by b.sander
Fixes #11268 .
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31470 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-24 20:35:46 +00:00
643a3ba58c
bcm63xx: drop linux 3.2 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31464 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-24 11:49:27 +00:00
f8cce554ff
bcm63xx: drop linux 3.0 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31463 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-24 11:49:24 +00:00
d4be3ed641
bcm63xx: switch kernel to 3.3
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31462 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-24 11:49:19 +00:00
5913da2e94
ar71xx: TL-WR741NDv4: add WLAN LED config
...
On TP-Link TL-WR741ND version 4, the WLAN LED must be configured to work.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31461 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-24 11:38:44 +00:00
281a545b07
kernel: update linux 3.3 to 3.3.3
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31460 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-24 09:25:38 +00:00
5520ed39bf
kernel: update linux 3.2 to 3.2.16
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31459 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-24 09:25:35 +00:00
4c00516bd2
kernel: add some more missing kernel config symbols
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31458 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-24 09:25:32 +00:00
5d3e17b374
[generic] enable NF_CONNTRACK_PROCFS for Linux 3.3, required for /proc/net/nf_conntrack ( #11339 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31454 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-24 00:55:57 +00:00
1393da343c
x86: restore config-default, it is needed for 2.6.39
...
Reported-by: Thomas Heil <heil@terminal-consulting.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31452 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-23 16:56:08 +00:00
74c822a8be
ramips: rt305x: add support for the UR-336UN board
...
Patch-by: Lebedev Dmitry <lebedev@trendnet.ru>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31451 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-23 16:56:06 +00:00
dd0dd6d0a0
ramips: rt305x: add support for the Asus WL-330N3G board
...
This patch adds support for the ASUS WL-330N3G
Comparing to the WL-330N, It have 32MB ram, usb support and a bicolor led.
The bi-color led is driven by 2 gpio.
I don't know how to handle this, so I simply made 2 leds : one red, one blue.
But the red light takes precedence over the blue one according to the chart below.
r = led is red
b = led is blue
0 = led is off
xy= x->r for red, b for blue led, y->value of brightness in /sys/class/leds/x/brughtness
initial state action led gpio state
r0 b0 r0->r1 r r0 b0
r0 b0 b0->b1 b r0 b1
r1 b0 r1->r0 0 r0 b0
r1 b0 b0->b1 r r1 *b1*
r1 b1 r1->r0 b r0 b1
r1 b1 b1->b0 r r1 b0
r0 b1 r0->r1 r r1 *b1*
r0 b1 b1->b0 0 r0 r0
Signed-off-by: Frédéric Leroy <fredo@starox.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31450 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-23 16:56:05 +00:00
d7054176d9
[malta] switch to 3.3
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31448 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-23 12:33:30 +00:00
7d6d93e281
[malta] add support for 3.3
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31447 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-23 12:33:27 +00:00
0283655914
[uml] switch to 3.3.2
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31446 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-23 12:33:24 +00:00
9e14302d94
[uml] add 3.3 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31445 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-23 12:33:19 +00:00
22d856df2d
[lantiq] Adding wifi eeprom extract for ARV752DPW - Easybox 802
...
Signed-off-by: Christian Rustmeier <rustmeier a.t. gmail dotty com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31443 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-23 09:40:37 +00:00
a4fcc4529e
ar8216: enable forwarding of multicast frames to the cpu port on ar8327 (thx, SeG)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31441 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-22 19:19:49 +00:00
de2804372e
[at91] flexibity: Cleanup the subtarget config
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31440 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-22 16:56:10 +00:00
32dbd5b399
[at91] tqma9263: update board definition for 3.x series and fix config choose
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31436 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-22 09:09:53 +00:00
72e3f7861a
[at91] Remove old netus board definition
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31435 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-22 09:09:50 +00:00
2e76284293
ep93xx: remove 2.6.39 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31434 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-22 07:20:55 +00:00
b154b50ea5
amazon: remove 2.6.3{0,2} support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31433 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-22 07:20:53 +00:00
4771c59d13
omap24xx: remove 2.6.38 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31426 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21 17:16:40 +00:00
31465d2422
xburst: remove 2.6.36 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31422 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21 17:03:10 +00:00
1fd9583294
malta: remove 2.6.39 and 3.0 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31421 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21 16:56:15 +00:00
61c9ef574c
mpc83xx: remove 2.6.32 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31420 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21 16:51:59 +00:00
d37663f6af
octeon: remove 2.6.30 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31419 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21 16:45:32 +00:00
febcb7168b
cns3xxx: remove 2.6.31 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31418 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21 16:42:05 +00:00
ad28da8084
au1000: remove 2.6.39 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31416 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21 16:30:40 +00:00
371ecc6b51
x86: remove 2.6.32 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31415 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21 16:17:48 +00:00
7b3e59ce27
ixp4xx: remove 2.6.3{2,8} and 3.0 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31414 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21 16:17:46 +00:00
668290df9c
linux/2.6.31: R.I.P.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31412 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21 15:18:58 +00:00
5ae4549c65
linux/2.6.30: R.I.P.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31411 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21 15:18:55 +00:00
e61d1ccbbf
linux: add broken flag to targets which are using 2.6.30
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31410 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21 15:18:54 +00:00
4522bd9b92
linux/3.3: nuke the gpio_buttons patch
...
It is superseded by the in-kernel gpio-keys-polled driver.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31409 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21 14:26:35 +00:00
7c42a215ec
mpc52xx: nuke 3.2 config
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31408 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21 12:36:47 +00:00
c1a44e1ece
mpc52xx: switch to 3.3.2
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31407 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21 12:36:45 +00:00
666a4ea643
mpc52xx: add kernel config for 3.3
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31406 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21 12:36:44 +00:00
aafeb976bf
ramips: nuke 3.2 suport
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31405 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21 12:30:53 +00:00
e4da3b437e
ramips: switch to 3.3.2
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31404 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21 12:30:51 +00:00
fe354a0b95
ramips: add support for 3.3
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31403 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21 12:30:50 +00:00
9cbdb584bf
ramips: rt305x: add OHCI/EHCI registration code for RT3352
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31402 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21 12:30:48 +00:00
3080f60ee8
ramips: rt305x: fix CPU clock detection on RT3352
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31401 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21 12:30:47 +00:00
5a5d52784e
ramips: rt305x: use different memory size setup for RT3352
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31400 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21 12:30:45 +00:00
13b3613164
ramips: rt3883: add profile and build sysupgrade image for the RT-N56U
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31399 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21 12:30:44 +00:00
d36fd45d78
ramips: add swconfig to the default package list
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31398 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21 12:30:43 +00:00
c813f4cc0a
ramips: build initramfs image for the Fonera 2.0N
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31397 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21 12:30:42 +00:00
7ffc163753
ramips: rt305x: add initial support for Tenda W306R V2.0
...
More device info at: http://wiki.openwrt.org/toh/tenda/w306r
Signed-off-by: David Pearce <David_18051985@hotmail.com.au>
[juhosg: fix checkpatch errors, remove kmod-phy and luci-ssl packages
from the profile, change broken GPIO number]
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31396 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21 12:30:40 +00:00
Gabor Juhos
Felix Fietkau
Jonas Gorski
Hauke Mehrtens
John Crispin
Jo-Philipp Wich
Imre Kaloz
Florian Fainelli
Claudio Mignanti