wifipineapple-openwrt/target/linux/ar71xx/image/Makefile

1606 lines
76 KiB
Makefile
Raw Normal View History

#
# Copyright (C) 2008-2011 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/image.mk
IMAGE_PROFILE:=$(if $(PROFILE),$(PROFILE),Default)
JFFS2_BLOCKSIZE = 64k 128k 256k
KERNEL_LOADADDR = 0x80060000
DEVICE_VARS += NETGEAR_KERNEL_MAGIC NETGEAR_BOARD NETGEAR_ID CMDLINE CONSOLE
define Build/netgear-squashfs
rm -rf $@.fs $@.squashfs
mkdir -p $@.fs/image
cp $@ $@.fs/image/uImage
$(STAGING_DIR_HOST)/bin/mksquashfs-lzma \
$@.fs $@.squashfs \
-noappend -root-owned -be -b 65536
dd if=/dev/zero bs=1k count=1 >> $@.squashfs
mkimage \
-A mips -O linux -T filesystem -C none \
-M $(NETGEAR_KERNEL_MAGIC) \
-a 0xbf070000 -e 0xbf070000 \
-n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
-d $@.squashfs $@
rm -rf $@.squashfs $@.fs
endef
define Build/netgear-uImage
$(call Build/uImage,$(1) -M $(NETGEAR_KERNEL_MAGIC))
endef
define Build/netgear-image
$(STAGING_DIR_HOST)/bin/mkdniimg \
-B $(NETGEAR_BOARD) -v OpenWrt.$(REVISION) \
$(if $(NETGEAR_ID),-H $(NETGEAR_ID)) \
-r "$(1)" \
-i $@ -o $@.new
mv $@.new $@
endef
# combine kernel and rootfs into one image
# -a align the rootfs start on an <align> bytes boundary
# -j add jffs2 end-of-filesystem markers
# -s strip padding from end of the image
# -X reserve <size> bytes in the firmware image (hexval prefixed with 0x)
define Build/mktplinkfw
$(STAGING_DIR_HOST)/bin/mktplinkfw \
-H $(TPLINK_HWID) -W $(TPLINK_HWREV) -F $(TPLINK_FLASHLAYOUT) -N OpenWrt -V $(REVISION) \
-k $(word 1,$^) \
-r $@ \
-o $@.new \
-a $(call rootfs_align,$(FILESYSTEM)) \
$(if $(findstring sysupgrade,$1),-j -X 0x40000) \
$(if $(findstring factory,$1),-j -X 0x40000 -s) \
$(if $(findstring initramfs,$1),-s -c)
@mv $@.new $@
endef
DEVICE_VARS += TPLINK_HWID TPLINK_HWREV TPLINK_FLASHLAYOUT
define Device/Default
BOARDNAME :=
DEVICE_PROFILE = $$(BOARDNAME)
PROFILES = Default Minimal $$(DEVICE_PROFILE)
MTDPARTS :=
IMAGES := sysupgrade.bin
BLOCKSIZE := 64k
FILESYSTEMS = $(filter-out jffs2-%,$(TARGET_FILESYSTEMS)) jffs2-$$(BLOCKSIZE)
CONSOLE = ttyS0,115200
CMDLINE = $$(if $$(BOARDNAME),board=$$(BOARDNAME)) $$(if $$(MTDPARTS),mtdparts=$$(MTDPARTS)) $$(if $$(CONSOLE),console=$$(CONSOLE))
KERNEL := kernel-bin | patch-cmdline | lzma | uImage lzma
IMAGES := sysupgrade.bin
IMAGE/sysupgrade.bin = append-kernel $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
endef
define Device/carambola2
BOARDNAME = CARAMBOLA2
IMAGE_SIZE = 16000k
CONSOLE = ttyATH0,115200
MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
endef
TARGET_DEVICES += carambola2
define Device/wndr3700
BOARDNAME = WNDR3700
NETGEAR_KERNEL_MAGIC = 0x33373030
NETGEAR_BOARD = WNDR3700
MTDPARTS = spi0.0:320k(u-boot)ro,128k(u-boot-env)ro,7680k(firmware),64k(art)ro
IMAGES := sysupgrade.bin factory.img factory-NA.img
KERNEL := kernel-bin | patch-cmdline | lzma -d20 | netgear-uImage lzma
IMAGE/sysupgrade.bin = append-kernel $$$$(BLOCKSIZE) | netgear-squashfs | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
IMAGE/factory.img = $$(IMAGE/sysupgrade.bin) | netgear-image
IMAGE/factory-NA.img = $$(IMAGE/sysupgrade.bin) | netgear-image NA
endef
define Device/wndr3700v2
$(Device/wndr3700)
NETGEAR_BOARD = WNDR3700v2
NETGEAR_KERNEL_MAGIC = 0x33373031
NETGEAR_ID = 29763654+16+64
MTDPARTS = spi0.0:320k(u-boot)ro,128k(u-boot-env)ro,15872k(firmware),64k(art)ro
IMAGES := sysupgrade.bin factory.img
endef
define Device/wndr3800
$(Device/wndr3700v2)
NETGEAR_BOARD = WNDR3800
NETGEAR_ID = 29763654+16+128
endef
define Device/wndr3800ch
$(Device/wndr3800)
NETGEAR_BOARD = WNDR3800CH
endef
define Device/wndrmac
$(Device/wndr3700v2)
NETGEAR_BOARD = WNDRMAC
endef
define Device/wndrmacv2
$(Device/wndr3800)
NETGEAR_BOARD = WNDRMACv2
endef
TARGET_DEVICES += wndr3700 wndr3700v2 wndr3800 wndr3800ch wndrmac wndrmacv2
define Device/tplink
TPLINK_HWREV := 0x1
KERNEL := kernel-bin | patch-cmdline | lzma
KERNEL_INITRAMFS := kernel-bin | patch-cmdline | lzma | mktplinkfw initramfs
IMAGES := sysupgrade.bin factory.bin
IMAGE/sysupgrade.bin := append-rootfs | mktplinkfw sysupgrade
IMAGE/factory.bin := append-rootfs | mktplinkfw factory
endef
define Device/tplink-4mlzma
$(Device/tplink)
TPLINK_FLASHLAYOUT := 4Mlzma
IMAGE_SIZE := 3904k
endef
define Device/tplink-8mlzma
$(Device/tplink)
TPLINK_FLASHLAYOUT := 8Mlzma
IMAGE_SIZE := 8000k
endef
rootfs_type=$(patsubst jffs2-%,jffs2,$(patsubst squashfs-%,squashfs,$(1)))
# $(1): rootfs type.
# $(2): board name.
define imgname
$(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(call rootfs_type,$(1))
endef
define rootfs_align
$(patsubst %-256k,0x40000,$(patsubst %-128k,0x20000,$(patsubst %-64k,0x10000,$(patsubst squashfs%,0x4,$(patsubst root.%,%,$(1))))))
endef
define sysupname
$(call imgname,$(1),$(2))-sysupgrade.bin
endef
define factoryname
$(call imgname,$(1),$(2))-factory.bin
endef
COMMA:=,
define mkcmdline
$(if $(1),board=$(1) )$(if $(2),console=$(2)$(COMMA)$(3))
endef
define mtdpartsize
$(shell sz=`echo '$(2)' | sed -ne 's/.*[:$(COMMA)]\([0-9]*\)k[@]*[0-9a-zx]*($(1)).*/\1/p'`; [ -n "$$sz" ] && echo $$(($$sz * 1024)))
endef
SINGLE_PROFILES:=
# $(1) : name of image build method to be used, e.g., TPLINK-LZMA, AthLzma.
# $(2) : name of the build template to be used, e.g. 64k, 64kraw, 128k, etc.
# $(3) : name of the profile to be defined.
# $(4) : board name.
# $(5)~$(7) : arguments for $(mkcmdline)
# board=$(1) console=$(2),$(3)
# $(8)~$(14): extra arguments.
define SingleProfile
# $(1): action name, e.g. loader, buildkernel, squashfs, etc.
define Image/Build/Profile/$(3)
$$(call Image/Build/Template/$(2)/$$(1),$(1),$(4),$$(call mkcmdline,$(5),$(6),$(7)),$(8),$(9),$(10),$(11),$(12),$(13),$(14))
endef
SINGLE_PROFILES += $(3)
endef
# $(1), name of the MultiProfile to be added.
# $(2), name of Profiles to be included in the MultiProfile.
define MultiProfile
define Image/Build/Profile/$(1)
$(foreach p,$(2),
$$(call Image/Build/Profile/$p,$$(1))
)
endef
endef
LOADER_MAKE := $(NO_TRACE_MAKE) -C lzma-loader KDIR=$(KDIR)
KDIR_TMP:=$(KDIR)/tmp
VMLINUX:=$(BIN_DIR)/$(IMG_PREFIX)-vmlinux
UIMAGE:=$(BIN_DIR)/$(IMG_PREFIX)-uImage
# $(1): input file.
# $(2): output file.
# $(3): extra arguments for lzma.
define CompressLzma
$(STAGING_DIR_HOST)/bin/lzma e $(1) -lc1 -lp2 -pb2 $(3) $(2)
endef
define PatchKernel
cp $(KDIR)/vmlinux$(3) $(KDIR_TMP)/vmlinux$(3)-$(1)
$(STAGING_DIR_HOST)/bin/patch-cmdline $(KDIR_TMP)/vmlinux$(3)-$(1) "$(strip $(2))"
endef
define PatchKernel/initramfs
$(call PatchKernel,$(1),$(2),-initramfs)
cp $(KDIR_TMP)/vmlinux-initramfs-$(1) $(call imgname,initramfs,$(1)).bin
endef
# $(1): board name.
# $(2): kernel command line.
# $(3): extra argumetns for lzma.
# $(4): name suffix, e.g. "-initramfs".
define PatchKernelLzma
cp $(KDIR)/vmlinux$(4) $(KDIR_TMP)/vmlinux$(4)-$(1)
$(STAGING_DIR_HOST)/bin/patch-cmdline $(KDIR_TMP)/vmlinux$(4)-$(1) "$(strip $(2))"
$(call CompressLzma,$(KDIR_TMP)/vmlinux$(4)-$(1),$(KDIR_TMP)/vmlinux$(4)-$(1).bin.lzma,$(3))
endef
define PatchKernelGzip
cp $(KDIR)/vmlinux$(3) $(KDIR_TMP)/vmlinux$(3)-$(1)
$(STAGING_DIR_HOST)/bin/patch-cmdline $(KDIR_TMP)/vmlinux$(3)-$(1) "$(strip $(2))"
gzip -9 -c $(KDIR_TMP)/vmlinux$(3)-$(1) > $(KDIR_TMP)/vmlinux$(3)-$(1).bin.gz
endef
ifneq ($(SUBTARGET),mikrotik)
# $(1): compression method of the data.
# $(2): extra arguments.
# $(3): input data file.
# $(4): output file.
define MkuImage
mkimage -A mips -O linux -T kernel -a 0x80060000 -C $(1) $(2) \
-e 0x80060000 -n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
-d $(3) $(4)
endef
# $(1): board name.
# $(2): kernel command line.
# $(3): extra arguments for lzma.
# $(4): name suffix, e.g. "-initramfs".
# $(5): extra arguments for mkimage.
define MkuImageLzma
$(call PatchKernelLzma,$(1),$(2),$(3),$(4))
$(call MkuImage,lzma,$(5),$(KDIR_TMP)/vmlinux$(4)-$(1).bin.lzma,$(KDIR_TMP)/vmlinux$(4)-$(1).uImage)
endef
define MkuImageLzma/initramfs
$(call PatchKernelLzma,$(1),$(2),$(3),-initramfs)
$(call MkuImage,lzma,$(4),$(KDIR_TMP)/vmlinux-initramfs-$(1).bin.lzma,$(call imgname,initramfs,$(1))-uImage.bin)
endef
define MkuImageGzip
$(call PatchKernelGzip,$(1),$(2))
$(call MkuImage,gzip,,$(KDIR_TMP)/vmlinux-$(1).bin.gz,$(KDIR_TMP)/vmlinux-$(1).uImage)
endef
define MkuImageGzip/initramfs
$(call PatchKernelGzip,$(1),$(2),-initramfs)
$(call MkuImage,gzip,,$(KDIR_TMP)/vmlinux-initramfs-$(1).bin.gz,$(call imgname,initramfs,$(1))-uImage.bin)
endef
define MkuImageOKLI
$(call MkuImage,lzma,-M 0x4f4b4c49,$(KDIR)/vmlinux.bin.lzma,$(KDIR_TMP)/vmlinux-$(1).okli)
endef
endif
# $(1): name of the 1st file.
# $(2): size limit of the 1st file if it is greater than 262144, or
# the erase size of the flash if it is greater than zero and less
# than 262144
# $(3): name of the 2nd file.
# $(4): size limit of the 2nd file if $(2) is greater than 262144, otherwise
# it is the size limit of the output file
# $(5): name of the output file.
# $(6): padding size.
define CatFiles
if [ $(2) -eq 0 ]; then \
filename="$(3)"; fstype=$$$${filename##*\.}; \
case "$$$${fstype}" in \
"jffs2-64k") bs=65536;; \
"jffs2-128k") bs=131072;; \
"jffs2-256k") bs=262144;; \
*) bs=`stat -c%s $(1)`;; \
esac; \
( dd if=$(1) bs=$$$${bs} conv=sync; cat $(3) ) > $(5); \
if [ -n "$(6)" ]; then \
case "$$$${fstype}" in \
squashfs*) \
padjffs2 $(5) $(6); \
;; \
esac; \
fi; \
if [ `stat -c%s $(5)` -gt $(4) ]; then \
echo "Warning: $(5) is too big (> $(4) bytes)" >&2; \
rm -f $(5); \
fi; \
else if [ $(2) -gt 262144 ]; then \
if [ `stat -c%s "$(1)"` -gt $(2) ]; then \
echo "Warning: $(1) is too big (> $(2) bytes)" >&2; \
else if [ `stat -c%s $(3)` -gt $(4) ]; then \
echo "Warning: $(3) is too big (> $(4) bytes)" >&2; \
else \
( dd if=$(1) bs=$(2) conv=sync; dd if=$(3) ) > $(5); \
fi; fi; \
else \
( dd if=$(1) bs=$(2) conv=sync; dd if=$(3) ) > $(5); \
if [ `stat -c%s $(5)` -gt $(4) ]; then \
echo "Warning: $(5) is too big (> $(4) bytes)" >&2; \
rm -f $(5); \
fi; \
fi; fi
endef
# $(1): rootfs type.
# $(2): board name.
# $(3): kernel image size limit.
# $(4): rootfs image size limit.
# $(5): padding argument for padjffs2.
Sysupgrade/KR=$(call CatFiles,$(2),$(3),$(KDIR)/root.$(1),$(4),$(call sysupname,$(1),$(5)))
Sysupgrade/KRuImage=$(call CatFiles,$(KDIR_TMP)/vmlinux-$(2).uImage,$(3),$(KDIR)/root.$(1),$(4),$(call sysupname,$(1),$(2)),$(5))
Sysupgrade/RKuImage=$(call CatFiles,$(KDIR)/root.$(1),$(4),$(KDIR_TMP)/vmlinux-$(2).uImage,$(3),$(call sysupname,$(1),$(2)))
# $(1): ubinize ini file
# $(2): working directory
# $(3): output file
# $(4): physical erase block size
# $(5): minimum I/O unit size
# $(6): custom options
define ubinize
$(CP) $(1) $(2)
( cd $(2); $(STAGING_DIR_HOST)/bin/ubinize -o $(3) -p $(4) -m $(5) $(6) $(1))
endef
#
# Embed lzma-compressed kernel inside lzma-loader.
#
# $(1), suffix of output filename, e.g. generic, lowercase board name, etc.
# $(2), suffix of target file to build, e.g. bin, gz, elf
# $(3), kernel command line to pass from lzma-loader to kernel
# $(4), unused here
# $(5), suffix of kernel filename, e.g. -initramfs, or empty
define Image/BuildLoader
-rm -rf $(KDIR)/lzma-loader
$(LOADER_MAKE) LOADER=loader-$(1).$(2) KERNEL_CMDLINE="$(3)"\
LZMA_TEXT_START=0x80a00000 LOADADDR=0x80060000 \
LOADER_DATA="$(KDIR)/vmlinux$(5).bin.lzma" BOARD="$(1)" \
compile loader.$(2)
-$(CP) $(KDIR)/loader-$(1).$(2) $(KDIR)/loader-$(1)$(5).$(2)
endef
#
# Build lzma-loader alone which will search for lzma-compressed kernel identified by
# uImage header with magic "OKLI" at boot time.
#
# $(4), offset into the flash space to start searching uImage magic "OKLI".
# $(5), size of search range starting at $(4). With 0 as the value, uImage
# header is expected to be at precisely $(4)
define Image/BuildLoaderAlone
-rm -rf $(KDIR)/lzma-loader
$(LOADER_MAKE) LOADER=loader-$(1).$(2) KERNEL_CMDLINE="$(3)" \
LZMA_TEXT_START=0x80a00000 LOADADDR=0x80060000 \
BOARD="$(1)" FLASH_OFFS=$(4) FLASH_MAX=$(5) \
compile loader.$(2)
endef
define Build/Clean
$(LOADER_MAKE) clean
endef
alfa_ap96_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,256k(u-boot-env)ro,13312k(rootfs),2048k(kernel),512k(caldata)ro,15360k@0x80000(firmware)
alfa_mtdlayout_8M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6144k(rootfs),1600k(kernel),64k(nvram),64k(art)ro,7744k@0x50000(firmware)
alfa_mtdlayout_16M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,15936k(firmware),64k(nvram),64k(art)ro
all0258n_mtdlayout=mtdparts=spi0.0:256k(u-boot),64k(u-boot-env),6272k(firmware),1536k(failsafe),64k(art)
all0315n_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,256k(u-boot-env),13568k(firmware),2048k(failsafe),256k(art)ro
ap81_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,5120k(rootfs),2688k(kernel),64k(art)ro,7808k@0x50000(firmware)
ap83_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,128k(u-boot-env)ro,4096k(rootfs),3648k(kernel),64k(art)ro,7744k@0x60000(firmware)
ap96_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,6144k(rootfs),1728k(kernel),64k(art)ro,7872k@0x40000(firmware)
ap113_mtd_layout=mtdparts=spi0.0:64k(u-boot),3008k(rootfs),896k(uImage),64k(NVRAM),64k(ART),3904k@0x10000(firmware)
ap121_mtdlayout_2M=mtdparts=spi0.0:64k(u-boot)ro,1216k(rootfs),704k(kernel),64k(art)ro,1920k@0x10000(firmware)
ap121_mtdlayout_4M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,2752k(rootfs),896k(kernel),64k(nvram),64k(art)ro,3648k@0x50000(firmware)
ap132_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),6400k(rootfs),64k(art),7808k@0x50000(firmware)
ap135_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14528k(rootfs),1472k(kernel),64k(art)ro,16000k@0x50000(firmware)
ap136_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6336k(rootfs),1408k(kernel),64k(mib0),64k(art)ro,7744k@0x50000(firmware)
bxu2000n2_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),8448k(rootfs),6016k(user),64k(cfg),64k(oem),64k(art)ro
cameo_ap81_mtdlayout=mtdparts=spi0.0:128k(u-boot)ro,64k(config)ro,3840k(firmware),64k(art)ro
cameo_ap91_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(nvram)ro,3712k(firmware),64k(mac)ro,64k(art)ro
cameo_ap99_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(nvram)ro,3520k(firmware),64k(mac)ro,192k(lp)ro,64k(art)ro
cameo_ap121_mtdlayout=mtdparts=spi0.0:64k(u-boot)ro,64k(art)ro,64k(mac)ro,64k(nvram)ro,192k(language)ro,3648k(firmware)
cameo_ap121_mtdlayout_8M=mtdparts=spi0.0:64k(u-boot)ro,64k(art)ro,64k(mac)ro,64k(nvram)ro,256k(language)ro,7680k@0x80000(firmware)
cameo_db120_mtdlayout=mtdparts=spi0.0:64k(uboot)ro,64k(nvram)ro,15936k(firmware),192k(lang)ro,64k(mac)ro,64k(art)ro
cameo_db120_mtdlayout_8M=mtdparts=spi0.0:64k(uboot)ro,64k(nvram)ro,7872k(firmware),128k(lang)ro,64k(art)ro
cap4200ag_mtdlayout=mtdparts=spi0.0:256k(u-boot),64k(u-boot-env),320k(custom)ro,1536k(kernel),12096k(rootfs),2048k(failsafe),64k(art),13632k@0xa0000(firmware)
cpe510_mtdlayout=mtdparts=spi0.0:128k(u-boot)ro,64k(pation-table)ro,64k(product-info)ro,1536k(kernel),6144k(rootfs),192k(config)ro,64k(ART)ro,7680k@0x40000(firmware)
eap300v2_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),320k(custom),13632k(firmware),2048k(failsafe),64k(art)ro
db120_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6336k(rootfs),1408k(kernel),64k(nvram),64k(art)ro,7744k@0x50000(firmware)
dgl_5500_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(nvram)ro,15296k(firmware),192k(lang)ro,512k(my-dlink)ro,64k(mac)ro,64k(art)ro
cameo_ap94_mtdlayout=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,6208k(firmware),64k(caldata)ro,1600k(unknown)ro,64k@0x7f0000(caldata_copy)
cameo_ap94_mtdlayout_fat=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,7808k(firmware),64k(caldata)ro,64k@0x660000(caldata_orig),6208k@0x50000(firmware_orig)
esr900_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),13248k(rootfs),1024k(manufacture)ro,64k(backup)ro,320k(storage)ro,64k(caldata)ro,14656k@0x40000(firmware)
esr1750_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),13248k(rootfs),1024k(manufacture)ro,64k(backup)ro,320k(storage)ro,64k(caldata)ro,14656k@0x40000(firmware)
ew-dorin_mtdlayout_4M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),3712k(firmware),64k(art)
ew-dorin_mtdlayout_16M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),16000k(firmware),64k(art)
f9k1115v2_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),14464k(rootfs),1408k(kernel),64k(nvram)ro,64k(envram)ro,64k(art)ro,15872k@0x50000(firmware)
dlrtdev_mtdlayout=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,6208k(firmware),64k(caldata)ro,640k(certs),960k(unknown)ro,64k@0x7f0000(caldata_copy)
dlrtdev_mtdlayout_fat=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,7168k(firmware),640k(certs),64k(caldata)ro,64k@0x660000(caldata_orig),6208k@0x50000(firmware_orig)
dragino2_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,16000k(firmware),64k(config)ro,64k(art)ro
hiwifi_hc6361_mtdlayout=mtdparts=spi0.0:64k(u-boot)ro,64k(bdinfo)ro,1280k(kernel),14848k(rootfs),64k(backup)ro,64k(art)ro,16128k@0x20000(firmware)
pb92_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,2752k(rootfs),896k(kernel),64k(nvram),64k(art)ro,3648k@0x50000(firmware)
planex_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7744k(firmware),128k(art)ro
ubntxm_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7552k(firmware),256k(cfg)ro,64k(EEPROM)ro
uap_pro_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,1536k(kernel),14208k(rootfs),256k(cfg)ro,64k(EEPROM)ro,15744k@0x50000(firmware)
ubdev_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7488k(firmware),64k(certs),256k(cfg)ro,64k(EEPROM)ro
whrhpg300n_mtdlayout=mtdparts=spi0.0:248k(u-boot)ro,8k(u-boot-env)ro,3712k(firmware),64k(art)ro
wlr8100_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),14080k(rootfs),192k(unknown)ro,64k(art)ro,384k(unknown2)ro,15488k@0x40000(firmware)
wpj558_mtdlayout_16M=mtdparts=spi0.0:192k(u-boot)ro,16128k(firmware),64k(art)ro
wndap360_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,1728k(kernel),6016k(rootfs),64k(nvram)ro,64k(art)ro,7744k@0x50000(firmware)
ar71xx: WNR2200: fix mounting root fs problem Solves ticket #14356 <https://dev.openwrt.org/ticket/14356> Without this patch, UART output will show only 4 partitions: [ 0.740000] 4 cmdlinepart partitions found on MTD device spi0.0 [ 0.750000] Creating 4 MTD partitions on "spi0.0": [ 0.750000] 0x000000000000-0x000000050000 : "u-boot" [ 0.760000] 0x000000050000-0x000000070000 : "u-boot-env" [ 0.770000] 0x000000070000-0x0000007f0000 : "firmware" [ 0.790000] 0x0000007f0000-0x000000800000 : "art" and then linux complains :VFS: Cannot open root device "(null)" With this patch, UART out will show 7 partitions: [ 0.740000] 4 cmdlinepart partitions found on MTD device spi0.0 [ 0.750000] Creating 4 MTD partitions on "spi0.0": [ 0.750000] 0x000000000000-0x000000040000 : "u-boot" [ 0.760000] 0x000000040000-0x000000050000 : "u-boot-env" [ 0.770000] 0x000000050000-0x0000007f0000 : "firmware" [ 0.780000] 2 netgear-fw partitions found on MTD device firmware [ 0.780000] 0x000000050000-0x00000014b440 : "kernel" [ 0.790000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only [ 0.800000] 0x00000014b440-0x0000007f0000 : "rootfs" [ 0.810000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only [ 0.820000] mtd: device 4 (rootfs) set to be root filesystem [ 0.830000] 1 squashfs-split partitions found on MTD device rootfs [ 0.830000] 0x000000340000-0x0000007f0000 : "rootfs_data" [ 0.840000] 0x0000007f0000-0x000000800000 : "art" This patch is tested against r39502 of trunk. Signed-off-by: Jonathan Chang <changcs@santos.ee.ntu.edu.tw> Patchwork: http://patchwork.openwrt.org/patch/4870/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39625 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-18 17:34:16 +00:00
wnr2200_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7808k(firmware),64k(art)ro
wnr2000v3_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,3712k(firmware),64k(art)ro
wnr2000v4_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,3776k(firmware),64k(art)ro
r6100_mtdlayout=mtdparts=ar934x-nfc:128k(u-boot)ro,256k(caldata),256k(caldata-backup),512k(config),512k(pot),2048k(kernel),122240k(ubi),25600k@0x1a0000(firmware),2048k(language),3072k(traffic_meter)
wndr4300_mtdlayout=mtdparts=ar934x-nfc:256k(u-boot)ro,256k(u-boot-env)ro,256k(caldata),512k(pot),2048k(language),512k(config),3072k(traffic_meter),2048k(kernel),23552k(ubi),25600k@0x6c0000(firmware),256k(caldata_backup),-(reserved)
zcn1523h_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6208k(rootfs),1472k(kernel),64k(configure)ro,64k(mfg)ro,64k(art)ro,7680k@0x50000(firmware)
mynet_n600_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(devdata)ro,64k(devconf)ro,15872k(firmware),64k(radiocfg)ro
mynet_rext_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,7808k(firmware),64k(nvram)ro,64k(ART)ro
zyx_nbg6716_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(env)ro,64k(RFdata)ro,-(nbu);ar934x-nfc:2048k(zyxel_rfsd),2048k(romd),1024k(header),2048k(kernel),-(ubi)
qihoo_c301_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),64k(devdata),64k(devconf),15744k(firmware),64k(warm_start),64k(action_image_config),64k(radiocfg)ro;spi0.1:15360k(upgrade2),1024k(privatedata)
define Image/BuildKernel
cp $(KDIR)/vmlinux.elf $(VMLINUX).elf
cp $(KDIR)/vmlinux $(VMLINUX).bin
dd if=$(KDIR)/vmlinux.bin.lzma of=$(VMLINUX).lzma bs=65536 conv=sync
dd if=$(KDIR)/vmlinux.bin.gz of=$(VMLINUX).gz bs=65536 conv=sync
$(call MkuImage,gzip,,$(KDIR)/vmlinux.bin.gz,$(UIMAGE)-gzip.bin)
$(call MkuImage,lzma,,$(KDIR)/vmlinux.bin.lzma,$(UIMAGE)-lzma.bin)
cp $(KDIR)/loader-generic.elf $(VMLINUX)-lzma.elf
-mkdir -p $(KDIR_TMP)
$(call Image/Build/Profile/$(IMAGE_PROFILE),buildkernel)
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
cp $(KDIR)/vmlinux-initramfs.elf $(VMLINUX)-initramfs.elf
cp $(KDIR)/vmlinux-initramfs $(VMLINUX)-initramfs.bin
dd if=$(KDIR)/vmlinux-initramfs.bin.lzma of=$(VMLINUX)-initramfs.lzma bs=65536 conv=sync
dd if=$(KDIR)/vmlinux-initramfs.bin.gz of=$(VMLINUX)-initramfs.gz bs=65536 conv=sync
$(call MkuImage,gzip,,$(KDIR)/vmlinux-initramfs.bin.gz,$(UIMAGE)-initramfs-gzip.bin)
$(call MkuImage,lzma,,$(KDIR)/vmlinux-initramfs.bin.lzma,$(UIMAGE)-initramfs-lzma.bin)
cp $(KDIR)/loader-generic-initramfs.elf $(VMLINUX)-initramfs-lzma.elf
$(call Image/Build/Initramfs)
endif
endef
Image/Build/WRT400N/buildkernel=$(call MkuImageLzma,$(2),$(3))
define Image/Build/WRT400N
$(call Sysupgrade/KRuImage,$(1),$(2),1310720,6488064)
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
wrt400n $(KDIR_TMP)/vmlinux-$(2).uImage $(KDIR)/root.$(1) $(call factoryname,$(1),$(2)); \
fi
endef
define Image/Build/CameoAP94/buildkernel
$(call MkuImageLzma,$(2),$(3) $(4))
$(call MkuImageLzma,$(2)-fat,$(3) $(5))
endef
define Image/Build/CameoAP94
$(eval fwsize=$(call mtdpartsize,firmware,$(4)))
$(eval fwsize_fat=$(call mtdpartsize,firmware,$(5)))
$(call Sysupgrade/KRuImage,$(1),$(2),0,$$$$(($(fwsize)-4*64*1024)),64)
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
( \
dd if=$(call sysupname,$(1),$(2)); \
echo -n "$(6)"; \
) > $(call imgname,$(1),$(2))-backup-loader.bin; \
if [ `stat -c%s $(call sysupname,$(1),$(2))` -gt 4194304 ]; then \
echo "Warning: $(call sysupname,$(1),$(2)) is too big" >&2; \
else \
( \
dd if=$(call sysupname,$(1),$(2)) bs=4096k conv=sync; \
echo -n "$(7)"; \
) > $(call factoryname,$(1),$(2)); \
fi; \
fi
$(call CatFiles,$(KDIR_TMP)/vmlinux-$(2)-fat.uImage,0,$(KDIR)/root.$(1),$$$$(($(fwsize_fat)-4*64*1024)),$(KDIR_TMP)/$(2)-fat.bin,64)
if [ -e "$(KDIR_TMP)/$(2)-fat.bin" ]; then \
echo -n "" > $(KDIR_TMP)/$(2)-fat.dummy; \
sh $(TOPDIR)/scripts/combined-image.sh \
"$(KDIR_TMP)/$(2)-fat.bin" \
"$(KDIR_TMP)/$(2)-fat.dummy" \
$(call sysupname,$(1),$(2)-fat); \
fi
endef
define Image/Build/WZRHP
$(call Sysupgrade/KRuImage,$(1),$(2),0,$$$$(($(3)-4*$(4)*1024)),$(4))
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
( \
echo -n -e "# Airstation Public Fmt1\x00\x00\x00\x00\x00\x00\x00\x00"; \
dd if=$(call sysupname,$(1),$(2)); \
) > $(call imgname,$(1),$(2))-tftp.bin; \
buffalo-enc -p $(5) -v 1.99 \
-i $(call sysupname,$(1),$(2)) \
-o $(KDIR_TMP)/$(2).enc; \
buffalo-tag -b $(5) -p $(5) -a ath -v 1.99 -m 1.01 -l mlang8 \
-w 3 -c 0x80041000 -d 0x801e8000 -f 1 -r M_ \
-i $(KDIR_TMP)/$(2).enc \
-o $(call factoryname,$(1),$(2)); \
fi
endef
Image/Build/WZRHP64K/buildkernel=$(call MkuImageLzma,$(2),$(3))
Image/Build/WZRHP64K/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
Image/Build/WZRHP64K=$(call Image/Build/WZRHP,$(1),$(2),33095680,64,$(4))
Image/Build/WZRHP128K/buildkernel=$(call MkuImageLzma,$(2),$(3))
Image/Build/WZRHP128K/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
Image/Build/WZRHP128K=$(call Image/Build/WZRHP,$(1),$(2),33030144,128,$(4))
Image/Build/WHRHPG300N/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
Image/Build/WHRHPG300N/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
define Image/Build/WHRHPG300N
$(eval fwsize=$(call mtdpartsize,firmware,$(4)))
$(call Sysupgrade/KRuImage,$(1),$(2),0,$$$$(($(fwsize)-4*64*1024)),64)
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
( \
echo -n -e "# Airstation Public Fmt1\x00\x00\x00\x00\x00\x00\x00\x00"; \
dd if=$(call sysupname,$(1),$(2)); \
) > $(call imgname,$(1),$(2))-tftp.bin; \
buffalo-enc -p $(5) -v 1.99 \
-i $(call sysupname,$(1),$(2)) \
-o $(KDIR_TMP)/$(2).enc; \
buffalo-tag -b $(5) -p $(5) -a ath -v 1.99 -m 1.01 -l mlang8 \
-w 3 -c 0x80041000 -d 0x801e8000 -f 1 -r M_ \
-i $(KDIR_TMP)/$(2).enc \
-o $(call factoryname,$(1),$(2)); \
fi
endef
define Image/Build/Cameo
$(eval fwsize=$(call mtdpartsize,firmware,$(4)))
$(call Sysupgrade/KRuImage,$(1),$(2),0,$$$$(($(fwsize)-4*64*1024)),64)
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
factory_size=$$$$(($(fwsize) - $(6))); \
( \
dd if=$(call sysupname,$(1),$(2)) bs=$$$${factory_size} conv=sync; \
echo -n $(5); \
) > $(call factoryname,$(1),$(2)); \
fi
endef
Image/Build/CameoAP81/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap81_mtdlayout))
Image/Build/CameoAP81=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_ap81_mtdlayout),$(4),65536)
Image/Build/CameoAP81/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap81_mtdlayout))
Image/Build/CameoAP91/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap91_mtdlayout))
Image/Build/CameoAP91=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_ap91_mtdlayout),$(4),65536)
Image/Build/CameoAP91/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap91_mtdlayout))
Image/Build/CameoAP99/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap99_mtdlayout))
Image/Build/CameoAP99=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_ap99_mtdlayout),$(4),65536)
Image/Build/CameoAP99/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap99_mtdlayout))
Image/Build/CameoAP135/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
Image/Build/CameoAP135=$(call Image/Build/Cameo,$(1),$(2),$(3),$(4),$(5),26)
Image/Build/CameoAP135/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
Image/Build/CameoDB120/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_db120_mtdlayout))
Image/Build/CameoDB120=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_db120_mtdlayout),$(4),26)
Image/Build/CameoDB120/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_db120_mtdlayout))
Image/Build/CameoDB120_8M/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_db120_mtdlayout_8M))
Image/Build/CameoDB120_8M=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_db120_mtdlayout_8M),$(4),26)
Image/Build/CameoDB120_8M/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_db120_mtdlayout_8M))
define Image/Build/CameoHornet
$(eval fwsize=$(call mtdpartsize,firmware,$(4)))
$(call Sysupgrade/KRuImage,$(1),$(2),0,$$$$(($(fwsize)-4*64*1024)),64)
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
for r in $(7); do \
[ -n "$$$$r" ] && dashr="-$$$$r" || dashr=; \
[ -z "$$$$r" ] && r="DEF"; \
mkcameofw -M HORNET -R "$$$$r" -S $(5) -V $(6) -c \
-K $(8) -I $(fwsize) \
-k "$(call sysupname,$(1),$(2))" \
-o $(call imgname,$(1),$(2))-factory$$$$dashr.bin; \
true; \
done; \
fi
endef
Image/Build/CameoAP121/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap121_mtdlayout))
Image/Build/CameoAP121=$(call Image/Build/CameoHornet,$(1),$(2),$(3),$(cameo_ap121_mtdlayout),$(4),$(5),$(6),0xe0000)
Image/Build/CameoAP121/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap121_mtdlayout))
Image/Build/CameoAP121_8M/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap121_mtdlayout_8M))
Image/Build/CameoAP121_8M=$(call Image/Build/CameoHornet,$(1),$(2),$(3),$(cameo_ap121_mtdlayout_8M),$(4),$(5),$(6),0x100000)
Image/Build/CameoAP121_8M/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap121_mtdlayout_8M))
define Image/Build/Ath
$(eval fwsize=$(call mtdpartsize,firmware,$(4)))
$(eval rootsize=$(call mtdpartsize,rootfs,$(4)))
$(eval kernsize=$(call mtdpartsize,kernel,$(4)))
$(call Sysupgrade/$(5),$(1),$(2),$(if $(6),$(6),$(kernsize)),$(if $(rootsize),$(rootsize),$(fwsize)))
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
dd if=$(KDIR_TMP)/vmlinux-$(2).uImage \
of=$(call imgname,kernel,$(2)).bin bs=64k conv=sync; \
dd if=$(KDIR)/root.$(1) \
of=$(call imgname,$(1),$(2)-rootfs).bin bs=128k conv=sync; \
fi
endef
Image/Build/AthGzip/buildkernel=$(call MkuImageGzip,$(2),$(3) $(4))
Image/Build/AthGzip=$(call Image/Build/Ath,$(1),$(2),$(3),$(4),$(5),$(6),$(7))
Image/Build/AthGzip/initramfs=$(call MkuImageGzip/initramfs,$(2),$(3) $(4))
Image/Build/AthLzma/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
Image/Build/AthLzma=$(call Image/Build/Ath,$(1),$(2),$(3),$(4),$(5),$(6),$(7))
Image/Build/AthLzma/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
Image/Build/Belkin/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
Image/Build/Belkin/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
define Image/Build/Belkin
$(eval fwsize=$(call mtdpartsize,firmware,$(4)))
$(eval kernsize=$(call mtdpartsize,kernel,$(4)))
$(eval rootsize=$(call mtdpartsize,rootfs,$(4)))
$(call Sysupgrade/RKuImage,$(1),$(2),$(kernsize),$(rootsize))
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
edimax_fw_header -m $(5) -v "OpenWrt$(REVISION)" \
-n "uImage" \
-i $(KDIR_TMP)/vmlinux-$(2).uImage \
-o $(KDIR_TMP)/$(2)-uImage; \
edimax_fw_header -m $(5) -v "OpenWrt$(REVISION)" \
-n "rootfs" \
-i $(KDIR)/root.$(1) \
-o $(KDIR_TMP)/$(2)-rootfs; \
( \
dd if=$(KDIR_TMP)/$(2)-rootfs; \
dd if=$(KDIR_TMP)/$(2)-uImage; \
) > "$(call factoryname,$(1),$(2))"; \
fi
endef
define Image/Build/EnGenius
$(eval fwsize=$(call mtdpartsize,firmware,$(4)))
$(eval rootsize=$(call mtdpartsize,rootfs,$(4)))
$(eval kernsize=$(call mtdpartsize,kernel,$(4)))
$(call Sysupgrade/$(5),$(1),$(2),$(if $(6),$(6),$(kernsize)),$(if $(rootsize),$(rootsize),$(fwsize)))
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
dd if=$(KDIR_TMP)/vmlinux-$(2).uImage \
of=$(call imgname,kernel,$(2)).bin bs=64k conv=sync; \
dd if=$(KDIR)/root.$(1) \
of=$(call imgname,$(1),$(2)-rootfs).bin bs=128k conv=sync; \
mksenaofw -e $(call sysupname,$(1),$(2)) \
-o $(call imgname,$(1),$(2))-factory.dlf \
-r 0x101 -p $(7) -t 2; \
fi
endef
Image/Build/EnGenius/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
Image/Build/EnGenius/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
define MkuImageHiWiFi
# Field ih_name needs to start with "tw150v1"
mkimage -A mips -O linux -T kernel -a 0x80060000 -C $(1) $(2) \
-e 0x80060000 -n 'tw150v1 MIPS OpenWrt Linux-$(LINUX_VERSION)' \
-d $(3) $(4)
endef
define MkuImageLzmaHiWiFi
$(call PatchKernelLzma,$(1),$(2),$(3),$(4))
$(call MkuImageHiWiFi,lzma,$(5),$(KDIR_TMP)/vmlinux$(4)-$(1).bin.lzma,$(KDIR_TMP)/vmlinux$(4)-$(1).uImage)
endef
Image/Build/HiWiFi/buildkernel=$(call MkuImageLzmaHiWiFi,$(2),$(3) $(4))
Image/Build/HiWiFi=$(call Image/Build/Ath,$(1),$(2),$(3),$(4),$(5),$(6),$(7))
Image/Build/HiWiFi/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
Image/Build/PB4X/buildkernel=$(call PatchKernelLzma,$(2),$(3))
define Image/Build/PB4X
dd if=$(KDIR_TMP)/vmlinux-$(2).bin.lzma \
of=$(call imgname,kernel,$(2)).bin bs=64k conv=sync
dd if=$(KDIR)/root.$(1) \
of=$(call imgname,$(1),$(2)-rootfs).bin bs=128k conv=sync
-sh $(TOPDIR)/scripts/combined-image.sh \
"$(call imgname,kernel,$(2)).bin" \
"$(call imgname,$(1),$(2)-rootfs).bin" \
$(call sysupname,$(1),$(2))
endef
Image/Build/MyLoader/buildkernel=$(call PatchKernelLzma,$(2),$(3))
Image/Build/MyLoader/initramfs=$(call PatchKernel/initramfs,$(2),$(3))
define Image/Build/MyLoader
$(eval fwsize=$(shell echo $$(($(4)-0x30000-4*64*1024))))
$(eval fwimage=$(KDIR_TMP)/$(2)-$(5)-firmware.bin)
$(call CatFiles,$(KDIR_TMP)/vmlinux-$(2).bin.lzma,65536,$(KDIR)/root.$(1),$(fwsize),$(fwimage))
if [ -e "$(fwimage)" ]; then \
$(STAGING_DIR_HOST)/bin/mkmylofw -B $(2) -s $(4) -v \
-p0x00030000:0:al:0x80060000:firmware:$(fwimage) \
$(call imgname,$(1),$(2))-$(5)-factory.img; \
echo -n "" > $(KDIR_TMP)/empty.bin; \
sh $(TOPDIR)/scripts/combined-image.sh \
$(fwimage) $(KDIR_TMP)/empty.bin \
$(call imgname,$(1),$(2))-$(5)-sysupgrade.bin; \
fi
endef
Image/Build/UAPPRO/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(uap_pro_mtdlayout))
define Image/Build/UAPPRO/buildkernel
$(call MkuImageLzma,$(2),$(3) $(uap_pro_mtdlayout))
-rm -rf $(KDIR_TMP)/$(2)
mkdir -p $(KDIR_TMP)/$(2)/image
cp $(KDIR_TMP)/vmlinux-$(2).uImage $(KDIR_TMP)/$(2)/image/kernel0
$(STAGING_DIR_HOST)/bin/mkfs.jffs2 \
--pad --big-endian --squash-uids -v -e 64KiB \
-o $(KDIR_TMP)/$(2)-kernel.jffs2 \
-d $(KDIR_TMP)/$(2)/image \
2>&1 1>/dev/null | awk '/^.+$$$$/'
-rm -rf $(KDIR_TMP)/$(2)
$(STAGING_DIR_HOST)/bin/padjffs2 $(KDIR_TMP)/$(2)-kernel.jffs2 -J 64
endef
define Image/Build/UAPPRO
$(call CatFiles,$(KDIR_TMP)/$(2)-kernel.jffs2,1572864,$(KDIR)/root.$(1),14548992,$(call sysupname,$(1),$(2)))
-$(STAGING_DIR_HOST)/bin/mkfwimage2 -f 0x9f000000 \
-v $(5).$(6).v6.0.0-OpenWrt-$(REVISION) \
-p jffs2:0x50000:0xf60000:0:0:$(call sysupname,$(1),$(2)) \
-o $(call factoryname,$(1),$(2))
endef
# $(4) = board (XS2, XS5, RS, XM)
# $(5) = series (BZ, XM, XW)
# $(6) = chip (ar7240, ar934x)
define Image/Build/UBNT2
$(eval fwsize=$(call mtdpartsize,firmware,$(3)))
$(call Sysupgrade/KRuImage,$(1),$(2),0,$$$$(($(fwsize)-4*64*1024)),64)
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
dd if=$(call sysupname,$(1),$(2)) of=$(KDIR_TMP)/$(2)-mtdpart-kernel.bin bs=1024k count=1; \
dd if=$(call sysupname,$(1),$(2)) of=$(KDIR_TMP)/$(2)-mtdpart-rootfs.bin bs=1024k skip=1; \
$(STAGING_DIR_HOST)/bin/mkfwimage \
-B $(4) -v $(5).$(6).v6.0.0-OpenWrt-$(REVISION) \
-k $(KDIR_TMP)/$(2)-mtdpart-kernel.bin \
-r $(KDIR_TMP)/$(2)-mtdpart-rootfs.bin \
-o $(call factoryname,$(1),$(2)); \
fi
endef
Image/Build/UBNTXM/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(ubntxm_mtdlayout))
Image/Build/UBNTXM/buildkernel=$(call MkuImageLzma,$(2),$(3) $(ubntxm_mtdlayout))
Image/Build/UBNTXM=$(call Image/Build/UBNT2,$(1),$(2),$(ubntxm_mtdlayout),$(4),$(5),$(6),$(7))
Image/Build/UBDEV/buildkernel=$(call MkuImageLzma,$(2),$(3) $(ubdev_mtdlayout))
Image/Build/UBDEV=$(call Image/Build/UBNT2,$(1),$(2),$(ubdev_mtdlayout),$(4),$(5),$(6),$(7))
Image/Build/UBNT/buildkernel=$(call PatchKernelLzma,$(2),$(3))
define Image/Build/UBNT
dd if=$(KDIR_TMP)/vmlinux-$(2).bin.lzma of=$(KDIR_TMP)/vmlinux-$(2).lzma bs=64k conv=sync
-$(STAGING_DIR_HOST)/bin/mkfwimage \
-B $(4) -v $(5).$(6).OpenWrt.$(REVISION) \
-k $(KDIR_TMP)/vmlinux-$(2).lzma \
-r $(BIN_DIR)/$(IMG_PREFIX)-root.$(1) \
-o $(call factoryname,$(1),$(2))
-sh $(TOPDIR)/scripts/combined-image.sh \
"$(KDIR_TMP)/vmlinux-$(2).lzma" \
"$(BIN_DIR)/$(IMG_PREFIX)-root.$(1)" \
$(call sysupname,$(1),$(2))
endef
Image/Build/Planex/initramfs=$(call MkuImageGzip/initramfs,$(2),$(3) $(planex_mtdlayout))
Image/Build/Planex/loader=$(call Image/BuildLoaderAlone,$(1),gz,$(2) $(planex_mtdlayout),0x52000,0)
define Image/Build/Planex/buildkernel
[ -e "$(KDIR)/loader-$(2).gz" ]
$(call MkuImageOKLI,$(2))
( \
dd if=$(KDIR)/loader-$(2).gz bs=8128 count=1 conv=sync; \
dd if=$(KDIR_TMP)/vmlinux-$(2).okli; \
) > $(KDIR_TMP)/kernel-$(2).bin
$(call MkuImage,gzip,,$(KDIR_TMP)/kernel-$(2).bin,$(KDIR_TMP)/vmlinux-$(2).uImage)
endef
define Image/Build/Planex
$(eval fwsize=$(call mtdpartsize,firmware,$(planex_mtdlayout)))
$(call Sysupgrade/KRuImage,$(1),$(2),0,$$$$(($(fwsize)-4*64*1024)),64)
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
$(STAGING_DIR_HOST)/bin/mkplanexfw \
-B $(2) \
-v 2.00.00 \
-i $(call sysupname,$(1),$(2)) \
-o $(call factoryname,$(1),$(2)); \
fi
endef
Image/Build/ALFA/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
Image/Build/ALFA/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
define Image/Build/ALFA
$(call Sysupgrade/RKuImage,$(1),$(2),$(5),$(6))
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
rm -rf $(KDIR)/$(1); \
mkdir -p $(KDIR)/$(1); \
cd $(KDIR)/$(1); \
cp $(KDIR_TMP)/vmlinux-$(2).uImage $(KDIR)/$(1)/$(7); \
cp $(KDIR)/root.$(1) $(KDIR)/$(1)/$(8); \
$(TAR) zcf $(call factoryname,$(1),$(2)) -C $(KDIR)/$(1) $(7) $(8); \
( \
echo WRM7222C | dd bs=32 count=1 conv=sync; \
echo -ne '\xfe'; \
) >> $(call factoryname,$(1),$(2)); \
fi
endef
Image/Build/Seama/loader=$(call Image/BuildLoader,$(1),bin,$(2) $(3),0x80060000)
define Image/Build/Seama
[ -e "$(KDIR)/loader-$(2).bin" ]
$(call CompressLzma,$(KDIR)/loader-$(2).bin,$(KDIR_TMP)/loader-$(2).bin.lzma)
-rm -f $(KDIR_TMP)/image-$(2).tmp
$(call CatFiles,$(KDIR_TMP)/loader-$(2).bin.lzma,$$$$(($(6) - 64)),$(KDIR)/root.$(1),$(7),$(KDIR_TMP)/image-$(2).tmp)
[ -e "$(KDIR_TMP)/image-$(2).tmp" ] && { \
head -c -4 "$(KDIR_TMP)/image-$(2).tmp" > "$(KDIR_TMP)/image-$(2).no-jffs2mark.tmp"; \
$(STAGING_DIR_HOST)/bin/seama \
-i $(KDIR_TMP)/image-$(2).no-jffs2mark.tmp \
-m "dev=/dev/mtdblock/1" -m "type=firmware"; \
$(STAGING_DIR_HOST)/bin/seama \
-s $(call imgname,$(1),$(2))-factory.bin \
-m "signature=$(5)" \
-i $(KDIR_TMP)/image-$(2).no-jffs2mark.tmp.seama; \
tail -c 4 "$(KDIR_TMP)/image-$(2).tmp" >> $(call imgname,$(1),$(2))-factory.bin; \
}
cat $(KDIR_TMP)/loader-$(2).bin.lzma > $(KDIR_TMP)/image-$(2)-sysupgrade.tmp
$(STAGING_DIR_HOST)/bin/seama \
-i $(KDIR_TMP)/image-$(2)-sysupgrade.tmp \
-m "dev=/dev/mtdblock/1" -m "type=firmware"
$(call CatFiles,$(KDIR_TMP)/image-$(2)-sysupgrade.tmp.seama,$(6),$(KDIR)/root.$(1),$(7),$(call sysupname,$(1),$(2)))
endef
define Image/Build/Seama/initramfs
$(call PatchKernelLzma,$(2),$(3) $(4),,-initramfs)
$(STAGING_DIR_HOST)/bin/seama \
-i $(KDIR_TMP)/vmlinux-initramfs-$(2).bin.lzma \
-m "dev=/dev/mtdblock/1" -m "type=firmware"
cat $(KDIR_TMP)/vmlinux-initramfs-$(2).bin.lzma.seama > $(call imgname,initramfs,$(2))-seama.bin
endef
Image/Build/Senao/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
Image/Build/Senao/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
define Image/Build/Senao
mkdir -p $(KDIR_TMP)/$(2)/
touch $(KDIR_TMP)/$(2)/FWINFO-OpenWrt-$(REVISION)-$(2)
-$(CP) ./$(2)/* $(KDIR_TMP)/$(2)/
dd if=$(KDIR_TMP)/vmlinux-$(2).uImage \
of=$(KDIR_TMP)/$(2)/openwrt-senao-$(2)-uImage-lzma.bin bs=64k conv=sync
dd if=$(KDIR)/root.$(1) \
of=$(KDIR_TMP)/$(2)/openwrt-senao-$(2)-root.$(1) bs=64k conv=sync
( \
cd $(KDIR_TMP)/$(2)/; \
$(TAR) -cz -f $(call factoryname,$(1),$(2)) * \
)
-rm -rf $(KDIR_TMP)/$(2)/
-sh $(TOPDIR)/scripts/combined-image.sh \
$(KDIR_TMP)/vmlinux-$(2).uImage \
$(KDIR)/root.$(1) \
$(call sysupname,$(1),$(2))
endef
Image/Build/TPLINKOLD/loader=$(call Image/BuildLoaderAlone,$(1),gz,$(2),0x22000,0)
define Image/Build/TPLINKOLD
[ -e "$(KDIR)/loader-$(2).gz" ]
$(call MkuImageOKLI,$(2))
( \
dd if=$(KDIR)/loader-$(2).gz bs=7680 count=1 conv=sync; \
dd if=$(KDIR_TMP)/vmlinux-$(2).okli conv=sync; \
) > $(KDIR_TMP)/kernel-$(2).bin
-$(STAGING_DIR_HOST)/bin/mktplinkfw \
-H $(4) -W $(5) -F $(6) -N OpenWrt -V $(REVISION)\
-X 0x40000 \
-k $(KDIR_TMP)/kernel-$(2).bin \
-r $(KDIR)/root.$(1) \
-o $(call factoryname,$(1),$(2))
-$(STAGING_DIR_HOST)/bin/mktplinkfw \
-H $(4) -W $(5) -F $(6) -N OpenWrt -V $(REVISION) -s\
-X 0x40000 \
-k $(KDIR_TMP)/kernel-$(2).bin \
-r $(KDIR)/root.$(1) \
-o $(call sysupname,$(1),$(2))
endef
define Image/Build/TPLINKOLD/initramfs
$(call Image/BuildLoader,$(2),gz,$(3),0x80060000,-initramfs)
-$(STAGING_DIR_HOST)/bin/mktplinkfw -c \
-H $(4) -W $(5) -F $(6) -N OpenWrt -V $(REVISION) -s\
-k $(KDIR)/loader-$(2)-initramfs.gz \
-o $(call imgname,$(1),$(2))-initramfs-uImage.bin
endef
Image/Build/TPLINK/loader=$(call Image/BuildLoaderAlone,$(1),gz,$(2),0x22000,0)
define Image/Build/TPLINK
[ -e "$(KDIR)/loader-$(2).gz" ]
$(call MkuImageOKLI,$(2))
( \
dd if=$(KDIR)/loader-$(2).gz bs=7680 count=1 conv=sync; \
dd if=$(KDIR_TMP)/vmlinux-$(2).okli conv=sync; \
) > $(KDIR_TMP)/kernel-$(2).bin
-$(STAGING_DIR_HOST)/bin/mktplinkfw \
-H $(4) -W $(5) -F $(6) -N OpenWrt -V $(REVISION)\
-X 0x40000 \
-k $(KDIR_TMP)/kernel-$(2).bin \
-r $(KDIR)/root.$(1) \
-a $(call rootfs_align,$(1)) -j \
-o $(call factoryname,$(1),$(2))
-$(STAGING_DIR_HOST)/bin/mktplinkfw \
-H $(4) -W $(5) -F $(6) -N OpenWrt -V $(REVISION) -s\
-X 0x40000 \
-k $(KDIR_TMP)/kernel-$(2).bin \
-r $(KDIR)/root.$(1) \
-a $(call rootfs_align,$(1)) -j \
-o $(call sysupname,$(1),$(2))
endef
define Image/Build/TPLINK/initramfs
$(call Image/BuildLoader,$(2),gz,$(3),0x80060000,-initramfs)
-$(STAGING_DIR_HOST)/bin/mktplinkfw -c \
-H $(4) -W $(5) -F $(6) -N OpenWrt -V $(REVISION) -s\
-k $(KDIR)/loader-$(2)-initramfs.gz \
-o $(call imgname,$(1),$(2))-uImage.bin
endef
Image/Build/TPLINK-LZMA/buildkernel=$(call PatchKernelLzma,$(2),$(3))
define Image/Build/TPLINK-LZMA
-$(STAGING_DIR_HOST)/bin/mktplinkfw \
-H $(4) -W $(5) -F $(6) -N OpenWrt -V $(REVISION) $(7) \
-X 0x40000 \
-k $(KDIR_TMP)/vmlinux-$(2).bin.lzma \
-r $(KDIR)/root.$(1) \
-a $(call rootfs_align,$(1)) -j \
-o $(call factoryname,$(1),$(2))
-$(STAGING_DIR_HOST)/bin/mktplinkfw \
-H $(4) -W $(5) -F $(6) -N OpenWrt -V $(REVISION) $(7) -s \
-X 0x40000 \
-k $(KDIR_TMP)/vmlinux-$(2).bin.lzma \
-r $(KDIR)/root.$(1) \
-a $(call rootfs_align,$(1)) -j \
-o $(call sysupname,$(1),$(2))
endef
define Image/Build/TPLINK-LZMA/initramfs
$(call PatchKernelLzma,$(2),$(3),,-initramfs)
-$(STAGING_DIR_HOST)/bin/mktplinkfw -c \
-H $(4) -W $(5) -F $(6) -N OpenWrt -V $(REVISION) $(7) -s \
-k $(KDIR_TMP)/vmlinux-initramfs-$(2).bin.lzma \
-o $(call imgname,$(1),$(2))-uImage.bin
endef
Image/Build/TPLINK-SAFELOADER/buildkernel=$(call PatchKernelLzma,$(2),$(3) $(4))
define Image/Build/TPLINK-SAFELOADER
-rm -rf $(KDIR)/lzma-loader
$(LOADER_MAKE) LOADER=loader-$(2).elf\
LZMA_TEXT_START=0x80a00000 LOADADDR=0x80060000 \
LOADER_DATA="$(KDIR_TMP)/vmlinux-$(2).bin.lzma" BOARD="$(2)" \
compile loader.elf
-$(STAGING_DIR_HOST)/bin/tplink-safeloader \
-B $(5) \
-k $(KDIR)/loader-$(2).elf \
-r $(KDIR)/root.$(1) \
-V $(REVISION) \
-j \
-o $(call factoryname,$(1),$(2))
-$(STAGING_DIR_HOST)/bin/tplink-safeloader \
-B $(5) \
-k $(KDIR)/loader-$(2).elf \
-r $(KDIR)/root.$(1) \
-V $(REVISION) \
-j -S \
-o $(call sysupname,$(1),$(2))
endef
define Image/Build/CyberTAN
echo -n '' > $(KDIR_TMP)/empty.bin
$(STAGING_DIR_HOST)/bin/trx -o $(KDIR)/image.tmp \
-f $(KDIR_TMP)/vmlinux-$(2).uImage -F $(KDIR_TMP)/empty.bin \
-x 32 -a 0x10000 -x -32 -f $(KDIR)/root.$(1)
-$(STAGING_DIR_HOST)/bin/addpattern -B $(2) -v v$(5) \
-i $(KDIR)/image.tmp \
-o $(call sysupname,$(1),$(2))
$(STAGING_DIR_HOST)/bin/trx -o $(KDIR)/image.tmp -f $(KDIR_TMP)/vmlinux-$(2).uImage \
-x 32 -a 0x10000 -x -32 -f $(KDIR)/root.$(1)
-$(STAGING_DIR_HOST)/bin/addpattern -B $(2) -v v$(5) -g \
-i $(KDIR)/image.tmp \
-o $(call factoryname,$(1),$(2))
rm $(KDIR)/image.tmp
endef
Image/Build/CyberTANGZIP/loader=$(call Image/BuildLoader,$(1),gz,$(2),0x80060000)
Image/Build/CyberTANGZIP/buildkernel=$(call MkuImage,gzip,,$(KDIR)/loader-$(2).gz,$(KDIR_TMP)/vmlinux-$(2).uImage)
Image/Build/CyberTANGZIP=$(call Image/Build/CyberTAN,$(1),$(2),$(3),$(4),$(5))
Image/Build/CyberTANLZMA/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
Image/Build/CyberTANLZMA=$(call Image/Build/CyberTAN,$(1),$(2),$(3),$(4),$(5))
Image/Build/Netgear/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4),,-M $(5))
define Image/Build/Netgear/buildkernel
$(call MkuImageLzma,$(2),$(3) $(4),-d20,,-M $(5))
-rm -rf $(KDIR_TMP)/$(2)
mkdir -p $(KDIR_TMP)/$(2)/image
cat $(KDIR_TMP)/vmlinux-$(2).uImage > $(KDIR_TMP)/$(2)/image/uImage
$(STAGING_DIR_HOST)/bin/mksquashfs-lzma \
$(KDIR_TMP)/$(2) $(KDIR_TMP)/vmlinux-$(2).uImage.squashfs.tmp1 \
-noappend -root-owned -be -b 65536
( \
cat $(KDIR_TMP)/vmlinux-$(2).uImage.squashfs.tmp1; \
dd if=/dev/zero bs=1k count=1 \
) > $(KDIR_TMP)/vmlinux-$(2).uImage.squashfs.tmp2
mkimage -A mips -O linux -T filesystem -C none -M $(5) \
-a 0xbf070000 -e 0xbf070000 \
-n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
-d $(KDIR_TMP)/vmlinux-$(2).uImage.squashfs.tmp2 \
$(KDIR_TMP)/vmlinux-$(2).uImage.squashfs
endef
define Image/Build/Netgear
$(eval fwsize=$(call mtdpartsize,firmware,$(4)))
$(call CatFiles,$(KDIR_TMP)/vmlinux-$(2).uImage.squashfs,0,$(KDIR)/root.$(1),$(fwsize),$(call sysupname,$(1),$(2)),64)
if [ -e $(call sysupname,$(1),$(2)) ]; then \
for r in $(7) ; do \
[ -n "$$$$r" ] && dashr="-$$$$r" || dashr= ; \
$(STAGING_DIR_HOST)/bin/mkdniimg \
-B $(6) -v OpenWrt.$(REVISION) -r "$$$$r" $(8) \
-i $(call sysupname,$(1),$(2)) \
-o $(call imgname,$(1),$(2))-factory$$$$dashr.img; \
done; \
fi
endef
Image/Build/NetgearLzma/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4),,-M $(5))
Image/Build/NetgearLzma/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4),-d20,,-M $(5))
define Image/Build/NetgearLzma
$(eval fwsize=$(call mtdpartsize,firmware,$(4)))
$(call CatFiles,$(KDIR_TMP)/vmlinux-$(2).uImage,0,$(KDIR)/root.$(1),$(fwsize),$(call sysupname,$(1),$(2)),64)
endef
Image/Build/NetgearNAND/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4),,-M $(5))
# $(1): (empty)
# $(2): Board name (small caps)
# $(3): Kernel board specific cmdline
# $(4): Kernel mtdparts definition
# $(5): U-Boot magic
define Image/Build/NetgearNAND/buildkernel
$(eval kernelsize=$(call mtdpartsize,kernel,$(4)))
$(call PatchKernelLzma,$(2),$(3) $(4),-d20)
dd if=$(KDIR_TMP)/vmlinux-$(2).bin.lzma \
of=$(KDIR_TMP)/vmlinux-$(2).bin.tmp \
bs=$$$$(($(kernelsize)-131072-2*64-1)) \
count=1 conv=sync
$(call MkuImage,lzma,-M $(5),$(KDIR_TMP)/vmlinux-$(2).bin.tmp,$(KDIR_TMP)/vmlinux-$(2).uImage)
echo -ne '\xff' >> $(KDIR_TMP)/vmlinux-$(2).uImage
# create a fake rootfs image
dd if=/dev/zero of=$(KDIR_TMP)/fakeroot-$(2) bs=131072 count=1
mkimage -A mips -O linux -T filesystem -C none \
-a 0xbf070000 -e 0xbf070000 \
-n 'MIPS OpenWrt fakeroot' \
-d $(KDIR_TMP)/fakeroot-$(2) \
-M $(5) \
$(KDIR_TMP)/fakeroot-$(2).uImage
# append the fake rootfs image to the kernel, it will reside in the last
# erase block of the kernel partition
cat $(KDIR_TMP)/fakeroot-$(2).uImage >> $(KDIR_TMP)/vmlinux-$(2).uImage
endef
# $(1): rootfs image suffix
# $(2): Board name (small caps)
# $(3): Kernel board specific cmdline
# $(4): Kernel mtdparts definition
# $(5): U-Boot magic
# $(6): Board name (upper caps)
# $(7): firmware region code (not used yet)
# $(8): DNI Hardware version
# $(9): suffix of the configuration file for ubinize
define Image/Build/NetgearNAND
$(eval firmwaresize=$(call mtdpartsize,firmware,$(4)))
$(eval kernelsize=$(call mtdpartsize,kernel,$(4)))
$(eval imageraw=$(KDIR_TMP)/$(2)-raw.img)
$(CP) $(KDIR)/root.squashfs-raw $(KDIR_TMP)/root.squashfs
echo -ne '\xde\xad\xc0\xde' > $(KDIR_TMP)/jffs2.eof
$(call ubinize,ubinize-$(9).ini,$(KDIR_TMP),$(KDIR_TMP)/$(2)-root.ubi,128KiB,2048,-E 5)
( \
dd if=$(KDIR_TMP)/vmlinux-$(2).uImage; \
dd if=$(KDIR_TMP)/$(2)-root.ubi \
) > $(imageraw)
$(STAGING_DIR_HOST)/bin/mkdniimg \
-B $(6) -v OpenWrt.$(REVISION) -r "$$$$r" $(8) \
-i $(imageraw) \
-o $(call imgname,ubi,$(2))-factory.img
$(call Image/Build/SysupgradeNAND,$(2),squashfs,$(KDIR_TMP)/vmlinux-$(2).uImage)
endef
ifdef CONFIG_PACKAGE_uboot-ar71xx-nbg460n_550n_550nh
Image/Build/ZyXEL/buildkernel=$(call MkuImageLzma,$(2),$(3))
define Image/Build/ZyXEL
$(call Sysupgrade/KRuImage,$(1),$(2),917504,2752512)
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
if [ ! -f $(BIN_DIR)/$(IMG_PREFIX)-$(2)-u-boot.bin ]; then \
echo "Warning: $(IMG_PREFIX)-$(2)-u-boot.bin not found" >&2; \
else \
$(STAGING_DIR_HOST)/bin/mkzynfw \
-B $(4) \
-b $(BIN_DIR)/$(IMG_PREFIX)-$(2)-u-boot.bin \
-r $(call sysupname,$(1),$(2)):0x10000 \
-o $(call factoryname,$(1),$(2)); \
fi; fi
endef
endif
define Image/Build/ZyXELNAND/buildkernel
$(eval kernelsize=$(call mtdpartsize,kernel,$(5)))
$(call MkuImageLzma,$(2),$(3) $(5) $(6))
mkdir -p $(KDIR_TMP)/$(2)/image/boot
cp $(KDIR_TMP)/vmlinux-$(2).uImage $(KDIR_TMP)/$(2)/image/boot/vmlinux.lzma.uImage
$(STAGING_DIR_HOST)/bin/mkfs.jffs2 \
--pad=$(kernelsize) --big-endian --squash-uids -v -e 128KiB \
-o $(KDIR_TMP)/$(2)-kernel.jffs2 \
-d $(KDIR_TMP)/$(2)/image \
2>&1 1>/dev/null | awk '/^.+$$$$/'
-rm -rf $(KDIR_TMP)/$(2)
endef
define Image/Build/ZyXELNAND
if [ "$(1)" != "squashfs" ]; then \
echo Only squashfs is supported; \
return 0; \
fi
$(eval firmwaresize=$(call mtdpartsize,firmware,$(4)))
$(eval kernelsize=$(call mtdpartsize,kernel,$(4)))
$(eval imageraw=$(KDIR_TMP)/$(2)-raw.img)
$(CP) $(KDIR)/root.$(1) $(KDIR_TMP)/ubi_root.img
$(call ubinize,ubinize-$(2).ini,$(KDIR_TMP),$(KDIR_TMP)/$(2)-root.ubi,128KiB,2048,-E 5)
( \
dd if=$(KDIR_TMP)/$(2)-kernel.jffs2; \
dd if=$(KDIR_TMP)/$(2)-root.ubi \
) > $(imageraw)
dd if=$(imageraw) of=$(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1)-factory.bin \
bs=128k conv=sync
$(call Image/Build/SysupgradeNAND,$(2),squashfs,$(KDIR_TMP)/$(2)-kernel.jffs2)
endef
Image/Build/OpenMesh/buildkernel=$(call MkuImageLzma,$(2))
define Image/Build/OpenMesh
-sh $(TOPDIR)/scripts/om-fwupgradecfg-gen.sh \
"$(4)" \
"$(BUILD_DIR)/fwupgrade.cfg-$(4)" \
"$(KDIR_TMP)/vmlinux-$(2).uImage" \
"$(KDIR)/root.$(1)"
-sh $(TOPDIR)/scripts/combined-ext-image.sh \
"$(4)" "$(call factoryname,$(1),$(2))" \
"$(BUILD_DIR)/fwupgrade.cfg-$(4)" "fwupgrade.cfg" \
"$(KDIR_TMP)/vmlinux-$(2).uImage" "kernel" \
"$(KDIR)/root.$(1)" "rootfs"
endef
Image/Build/Zcomax/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
Image/Build/Zcomax/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
define Image/Build/Zcomax
$(call Sysupgrade/RKuImage,$(1),$(2),1507328,6356992)
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
$(STAGING_DIR_HOST)/bin/mkzcfw \
-B $(2) \
-k $(KDIR_TMP)/vmlinux-$(2).uImage \
-r $(BIN_DIR)/$(IMG_PREFIX)-root.$(1) \
-o $(call imgname,$(1),$(2))-factory.img; \
fi
endef
# $(1): template name to be defined, etc. squashfs-only, 64k, 64kraw, etc.
# $(2): jffs2 blocksize.
define Jffs2Template
define Image/Build/Template/$(1)/jffs2-$(2)
$$(call Image/Build/$$(1),jffs2-$(2),$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8),$$(9),$$(10))
endef
endef
# $(1): template name to be defined.
# $(2): squashfs suffix to be used.
# $(3): jffs2 suffix to be used.
define BuildTemplate
# $(1) : name of build method.
# $(2) : board name.
# $(3) : kernel command line.
# $(4)~$(8): extra arguments.
define Image/Build/Template/$(1)/initramfs
$$(call Image/Build/$$(1)/initramfs,initramfs,$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8),$$(9),$$(10))
endef
define Image/Build/Template/$(1)/loader
$$(call Image/Build/$$(1)/loader,$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8),$$(9),$$(10))
endef
define Image/Build/Template/$(1)/buildkernel
$$(call Image/Build/$$(1)/buildkernel,,$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8),$$(9),$$(10))
endef
define Image/Build/Template/$(1)/squashfs
$$(call Image/Build/$$(1),squashfs$(2),$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8),$$(9),$$(10))
endef
$(if $(3),$(foreach bs,$(3),$(eval $(call Jffs2Template,$(1),$(bs)))))
endef
$(eval $(call BuildTemplate,squashfs-only))
$(eval $(call BuildTemplate,64k,-64k,64k))
$(eval $(call BuildTemplate,64kraw,-raw,64k))
$(eval $(call BuildTemplate,64kraw-nojffs,-raw))
$(eval $(call BuildTemplate,128k,,128k))
$(eval $(call BuildTemplate,128kraw,-raw,128k))
$(eval $(call BuildTemplate,256k,,256k))
$(eval $(call BuildTemplate,all,,64k 128k 256k))
ifeq ($(SUBTARGET),generic)
$(eval $(call SingleProfile,ALFA,64k,ALFANX,alfa-nx,ALFA-NX,ttyS0,115200,$$(alfa_mtdlayout_8M),1638400,6291456,vmlinux.gz.uImage,pb9x-2.6.31-jffs2))
$(eval $(call SingleProfile,ALFA,64k,HORNETUB,hornet-ub,HORNET-UB,ttyATH0,115200,$$(alfa_mtdlayout_8M),1638400,6291456,kernel_image,rootfs_image))
$(eval $(call SingleProfile,ALFA,64k,TUBE2H8M,tube2h-8M,TUBE2H,ttyATH0,115200,$$(alfa_mtdlayout_8M),1638400,6291456,kernel.image,rootfs.image))
$(eval $(call SingleProfile,AthGzip,64k,AP81,ap81,AP81,ttyS0,115200,$$(ap81_mtdlayout),RKuImage))
$(eval $(call SingleProfile,AthGzip,64k,AP83,ap83,AP83,ttyS0,115200,$$(ap83_mtdlayout),RKuImage))
$(eval $(call SingleProfile,AthGzip,64k,AP96,ap96,AP96,ttyS0,115200,$$(ap96_mtdlayout),RKuImage))
$(eval $(call SingleProfile,AthGzip,64k,WNDAP360,wndap360,WNDAP360,ttyS0,9600,$$(wndap360_mtdlayout),KRuImage))
$(eval $(call SingleProfile,AthLzma,64k,ALFAAP96,alfa-ap96,ALFA-AP96,ttyS0,115200,$$(alfa_ap96_mtdlayout),RKuImage))
$(eval $(call SingleProfile,AthLzma,64k,ALL0258N,all0258n,ALL0258N,ttyS0,115200,$$(all0258n_mtdlayout),KRuImage,65536))
$(eval $(call SingleProfile,AthLzma,256k,ALL0315N,all0315n,ALL0315N,ttyS0,115200,$$(all0315n_mtdlayout),KRuImage,262144))
$(eval $(call SingleProfile,AthLzma,64k,AP113,ap113,AP113,ttyS0,115200,$$(ap113_mtd_layout),RK))
$(eval $(call SingleProfile,AthLzma,64k,AP121_2M,ap121-2M,AP121,ttyATH0,115200,$$(ap121_mtdlayout_2M),RKuImage))
$(eval $(call SingleProfile,AthLzma,64k,AP121_4M,ap121-4M,AP121,ttyATH0,115200,$$(ap121_mtdlayout_4M),RKuImage))
$(eval $(call SingleProfile,AthLzma,64k,AP121MINI,ap121-mini,AP121-MINI,ttyATH0,115200,$$(ap121_mtdlayout_4M),RKuImage))
$(eval $(call SingleProfile,AthLzma,64k,AP132,ap132,AP132,ttyS0,115200,$$(ap132_mtdlayout),KRuImage))
$(eval $(call SingleProfile,AthLzma,64k,AP135,ap135-020,AP135-020,ttyS0,115200,$$(ap135_mtdlayout),RKuImage))
$(eval $(call SingleProfile,AthLzma,64k,AP136_010,ap136-010,AP136-010,ttyS0,115200,$$(ap136_mtdlayout),RKuImage))
$(eval $(call SingleProfile,AthLzma,64k,AP136_020,ap136-020,AP136-020,ttyS0,115200,$$(ap136_mtdlayout),RKuImage))
$(eval $(call SingleProfile,AthLzma,64k,BXU2000N2,bxu2000n-2-a1,BXU2000n-2-A1,ttyS0,115200,$$(bxu2000n2_mtdlayout),RKuImage))
$(eval $(call SingleProfile,AthLzma,64k,CAP4200AG,cap4200ag,CAP4200AG,ttyS0,115200,$$(cap4200ag_mtdlayout),KRuImage))
$(eval $(call SingleProfile,AthLzma,64k,DB120,db120,DB120,ttyS0,115200,$$(db120_mtdlayout),RKuImage))
$(eval $(call SingleProfile,AthLzma,64k,DRAGINO2,dragino2,DRAGINO2,ttyATH0,115200,$$(dragino2_mtdlayout),KRuImage,65536))
$(eval $(call SingleProfile,AthLzma,64k,EWDORINAP,ew-dorin,EW-DORIN,ttyATH0,115200,$$(ew-dorin_mtdlayout_4M),KRuImage,65536))
$(eval $(call SingleProfile,AthLzma,64k,EWDORINRT,ew-dorin-router,EW-DORIN-ROUTER,ttyATH0,115200,$$(ew-dorin_mtdlayout_4M),KRuImage,65536))
$(eval $(call SingleProfile,AthLzma,64k,EWDORIN16M,ew-dorin-16M,EW-DORIN,ttyATH0,115200,$$(ew-dorin_mtdlayout_16M),KRuImage,65536))
$(eval $(call SingleProfile,AthLzma,64k,HORNETUBx2,hornet-ub-x2,HORNET-UB,ttyATH0,115200,$$(alfa_mtdlayout_16M),KRuImage,65536))
$(eval $(call SingleProfile,AthLzma,64k,PB92,pb92,PB92,ttyS0,115200,$$(pb92_mtdlayout),KRuImage))
$(eval $(call SingleProfile,AthLzma,64k,TUBE2H16M,tube2h-16M,TUBE2H,ttyATH0,115200,$$(alfa_mtdlayout_16M),KRuImage,65536))
$(eval $(call SingleProfile,AthLzma,64k,WLR8100,wlr8100,WLR8100,ttyS0,115200,$$(wlr8100_mtdlayout),KRuImage))
$(eval $(call SingleProfile,AthLzma,64k,WPJ558_16M,wpj558-16M,WPJ558,ttyS0,115200,$$(wpj558_mtdlayout_16M),KRuImage,65536))
$(eval $(call SingleProfile,Belkin,64k,F9K1115V2,f9k1115v2,F9K1115V2,ttyS0,115200,$$(f9k1115v2_mtdlayout),BR-6679BAC))
$(eval $(call SingleProfile,CameoAP91,64kraw,DIR600A1,dir-600-a1,DIR-600-A1,ttyS0,115200,"AP91-AR7240-RT-090223-00"))
$(eval $(call SingleProfile,CameoAP91,64kraw,DIR601A1,dir-601-a1,DIR-600-A1,ttyS0,115200,"AP91-AR7240-RT-090223-02"))
$(eval $(call SingleProfile,CameoAP91,64kraw,FR54RTR,fr-54rtr,DIR-600-A1,ttyS0,115200,"AP91-AR7240-RT-090223-01"))
$(eval $(call SingleProfile,CameoAP99,64kraw,DIR615E1,dir-615-e1,DIR-615-E1,ttyS0,115200,"AP93-AR7240-RT-081028-00"))
$(eval $(call SingleProfile,CameoAP99,64kraw,DIR615E4,dir-615-e4,DIR-615-E4,ttyS0,115200,"AP99-AR7240-RT-091105-05"))
$(eval $(call SingleProfile,CameoAP81,64kraw-nojffs,A02RBW300N,a02-rb-w300n,TEW-632BRP,ttyS0,115200,"AP81-AR9130-RT-070614-03"))
$(eval $(call SingleProfile,CameoAP81,64kraw-nojffs,DIR615C1,dir-615-c1,DIR-615-C1,ttyS0,115200,"AP81-AR9130-RT-070614-02"))
$(eval $(call SingleProfile,CameoAP81,64kraw-nojffs,TEW632BRP,tew-632brp,TEW-632BRP,ttyS0,115200,"AP81-AR9130-RT-070614-00"))
$(eval $(call SingleProfile,CameoAP81,64kraw-nojffs,TEW652BRP_FW,tew-652brp,TEW-632BRP,ttyS0,115200,"AP81-AR9130-RT-080609-05"))
$(eval $(call SingleProfile,CameoAP81,64kraw-nojffs,TEW652BRP_RECOVERY,tew-652brp-recovery,TEW-632BRP,ttyS0,115200,"AP81-AR9130-RT-070614-02"))
$(eval $(call SingleProfile,CameoAP121,64kraw-nojffs,TEW712BR,tew-712br,TEW-712BR,ttyATH0,115200,"HORNET-RT-TEW712BR-3",1.99,""))
$(eval $(call SingleProfile,CameoAP121,64kraw-nojffs,DIR601B1,dir-601-b1,TEW-712BR,ttyATH0,115200,"HORNET-RT-DIR601B1-3",2.99.99,"" "NA"))
$(eval $(call SingleProfile,CameoAP121_8M,64kraw-nojffs,DIR505A1,dir-505-a1,DIR-505-A1,ttyATH0,115200,"HORNET-PACKET-DIR505A1-3",1.99.99,""))
$(eval $(call SingleProfile,CameoAP135,64kraw,DGL5500A1,dgl-5500-a1,DGL-5500-A1,ttyS0,115200,$$(dgl_5500_mtdlayout),"00AP135AR9558-RT-130508-00"))
$(eval $(call SingleProfile,CameoDB120,64kraw,DHP1565A1,dhp-1565-a1,DHP-1565-A1,ttyS0,115200,"00DB120AR9344-RT-101214-00"))
$(eval $(call SingleProfile,CameoDB120,64kraw,DIR825C1,dir-825-c1,DIR-825-C1,ttyS0,115200,"00DB120AR9344-RT-101214-00"))
$(eval $(call SingleProfile,CameoDB120,64kraw,DIR835A1,dir-835-a1,DIR-835-A1,ttyS0,115200,"00DB120AR9344-RT-101214-00"))
$(eval $(call SingleProfile,CameoDB120_8M,64kraw,TEW732BR,tew-732br,TEW-732BR,ttyS0,115200,"00DB120AR9341-RT-120906-NA"))
$(eval $(call SingleProfile,CyberTANGZIP,64k,WRT160NL,wrt160nl,WRT160NL,ttyS0,115200,,1.00.01))
$(eval $(call SingleProfile,CyberTANLZMA,64k,MYNETREXT,mynet-rext,MYNET-REXT,ttyS0,115200,$$(mynet_rext_mtdlayout) root=31:2,1.00.01))
$(eval $(call SingleProfile,CameoAP94,64kraw,DIR825B1,dir-825-b1,DIR-825-B1,ttyS0,115200,$$(cameo_ap94_mtdlayout),$$(cameo_ap94_mtdlayout_fat),01AP94-AR7161-RT-080619-00,00AP94-AR7161-RT-080619-00))
$(eval $(call SingleProfile,CameoAP94,64kraw,TEW673GRU,tew-673gru,TEW-673GRU,ttyS0,115200,$$(cameo_ap94_mtdlayout),$$(cameo_ap94_mtdlayout_fat),01AP94-AR7161-RT-080619-01,00AP94-AR7161-RT-080619-01))
$(eval $(call SingleProfile,CameoAP94,64kraw,DLRTDEV01,dlrtdev01,DIR-825-B1,ttyS0,115200,$$(dlrtdev_mtdlayout),$$(dlrtdev_mtdlayout_fat),01AP94-AR7161-RT-080619-00,00AP94-AR7161-RT-080619-00))
$(eval $(call SingleProfile,EnGenius,64k,ESR900,esr900,ESR900,ttyS0,115200,$$(esr900_mtdlayout),KRuImage,,0x4e))
$(eval $(call SingleProfile,EnGenius,64k,ESR1750,esr1750,ESR1750,ttyS0,115200,$$(esr1750_mtdlayout),KRuImage,,0x61))
$(eval $(call SingleProfile,HiWiFi,64k,HIWIFI_HC6361,hiwifi-hc6361,HiWiFi-HC6361,ttyATH0,115200,$$(hiwifi_hc6361_mtdlayout),KRuImage))
$(eval $(call SingleProfile,MyLoader,64k,WP543_2M,wp543,,ttyS0,115200,0x200000,2M))
$(eval $(call SingleProfile,MyLoader,64k,WP543_4M,wp543,,ttyS0,115200,0x400000,4M))
$(eval $(call SingleProfile,MyLoader,64k,WP543_8M,wp543,,ttyS0,115200,0x800000,8M))
$(eval $(call SingleProfile,MyLoader,64k,WP543_16M,wp543,,ttyS0,115200,0x1000000,16M))
$(eval $(call SingleProfile,MyLoader,64k,WPE72_4M,wpe72,,ttyS0,115200,0x400000,4M))
$(eval $(call SingleProfile,MyLoader,64k,WPE72_8M,wpe72,,ttyS0,115200,0x800000,8M))
$(eval $(call SingleProfile,MyLoader,64k,WPE72_16M,wpe72,,ttyS0,115200,0x1000000,16M))
$(eval $(call SingleProfile,Netgear,64kraw,WNR2000V3,wnr2000v3,WNR2000V3,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x32303033,WNR2000V3,"" NA,))
$(eval $(call SingleProfile,NetgearLzma,64kraw,WNR2000V4,wnr2000v4,WNR2000V4,ttyS0,115200,$$(wnr2000v4_mtdlayout),0x32303034,WNR2000V4,"" NA,))
$(eval $(call SingleProfile,Netgear,64kraw,WNR2200,wnr2200,WNR2200,ttyS0,115200,$$(wnr2200_mtdlayout),0x32323030,WNR2200,"" NA,))
$(eval $(call SingleProfile,Netgear,64kraw,REALWNR612V2,wnr612v2,WNR612V2,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x32303631,WNR612V2,"",))
$(eval $(call SingleProfile,Netgear,64kraw,N150R,n150r,WNR612V2,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x32303631,N150R,"",))
$(eval $(call SingleProfile,Netgear,64kraw,REALWNR1000V2,wnr1000v2,WNR1000V2,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x31303031,WNR1000V2,"",))
$(eval $(call SingleProfile,Netgear,64kraw,WNR1000V2_VC,wnr1000v2-vc,WNR1000V2,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x31303030,WNR1000V2-VC,"",))
$(eval $(call SingleProfile,OpenMesh,squashfs-only,OM2P,om2p,,,,OM2P))
$(eval $(call SingleProfile,OpenMesh,squashfs-only,OM5P,om5p,,,,OM5P))
$(eval $(call SingleProfile,OpenMesh,squashfs-only,MR600,mr600,,,,MR600))
$(eval $(call SingleProfile,OpenMesh,squashfs-only,MR900,mr900,,,,MR900))
$(eval $(call SingleProfile,PB4X,128k,ALL0305,all0305,ALL0305,ttyS0,115200))
$(eval $(call SingleProfile,PB4X,128k,EAP7660D,eap7660d,EAP7660D,ttyS0,115200))
$(eval $(call SingleProfile,PB4X,64k,JA76PF,ja76pf,JA76PF,ttyS0,115200))
$(eval $(call SingleProfile,PB4X,64k,JA76PF2,ja76pf2,JA76PF2,ttyS0,115200))
$(eval $(call SingleProfile,PB4X,64k,JWAP003,jwap003,JWAP003,ttyS0,115200))
$(eval $(call SingleProfile,PB4X,64k,PB42,pb42,PB42,ttyS0,115200))
$(eval $(call SingleProfile,PB4X,64k,PB44,pb44,PB44,ttyS0,115200))
$(eval $(call SingleProfile,Planex,64kraw,MZKW04NU,mzk-w04nu,MZK-W04NU,ttyS0,115200))
$(eval $(call SingleProfile,Planex,64kraw,MZKW300NH,mzk-w300nh,MZK-W300NH,ttyS0,115200))
$(eval $(call SingleProfile,Seama,64k,MYNETN600,mynet-n600,MYNET-N600,ttyS0,115200,$$(mynet_n600_mtdlayout),wrgnd16_wd_db600,1310720,16187392))
$(eval $(call SingleProfile,Seama,64k,MYNETN750,mynet-n750,MYNET-N750,ttyS0,115200,$$(mynet_n600_mtdlayout),wrgnd13_wd_av,1310720,16187392))
$(eval $(call SingleProfile,Seama,64k,QIHOO360,qihoo-c301,QIHOO-C301,ttyS0,115200,$$(qihoo_c301_mtdlayout),wrgac26_qihoo360_360rg,1310720,16121856))
$(eval $(call SingleProfile,Senao,squashfs-only,EAP300V2,eap300v2,EAP300V2,ttyS0,115200,$$(eap300v2_mtdlayout)))
$(eval $(call SingleProfile,TPLINKOLD,squashfs-only,TLWR841NV15,tl-wr841nd-v1.5,TL-WR841N-v1.5,ttyS0,115200,0x08410002,2,4M))
$(eval $(call SingleProfile,TPLINK,64kraw,RNXN360RT,rnx-n360rt,TL-WR941ND,ttyS0,115200,0x09410002,0x00420001,4M))
$(eval $(call SingleProfile,TPLINK,64kraw,TLMR3220V1,tl-mr3220-v1,TL-MR3220,ttyS0,115200,0x32200001,1,4M))
$(eval $(call SingleProfile,TPLINK,64kraw,TLMR3420V1,tl-mr3420-v1,TL-MR3420,ttyS0,115200,0x34200001,1,4M))
$(eval $(call SingleProfile,TPLINK,64kraw,TLWA701NV1,tl-wa701n-v1,TL-WA901ND,ttyS0,115200,0x07010001,1,4M))
$(eval $(call SingleProfile,TPLINK,64kraw,TLWA730REV1,tl-wa730rev1,TL-WA901ND,ttyS0,115200,0x07300001,1,4M))
$(eval $(call SingleProfile,TPLINK,64kraw,TLWA7510NV1,tl-wa7510n,TL-WA7510N,ttyS0,115200,0x75100001,1,4M))
$(eval $(call SingleProfile,TPLINK,64kraw,TLWA801NV1,tl-wa801nd-v1,TL-WA901ND,ttyS0,115200,0x08010001,1,4M))
$(eval $(call SingleProfile,TPLINK,64kraw,TLWA830RV1,tl-wa830re-v1,TL-WA901ND,ttyS0,115200,0x08300010,1,4M))
$(eval $(call SingleProfile,TPLINK,64kraw,TLWA901NV1,tl-wa901nd-v1,TL-WA901ND,ttyS0,115200,0x09010001,1,4M))
$(eval $(call SingleProfile,TPLINK,64kraw,TLWA901NV2,tl-wa901nd-v2,TL-WA901ND-v2,ttyS0,115200,0x09010002,1,4M))
$(eval $(call SingleProfile,TPLINK,64kraw,TLWR740NV1,tl-wr740n-v1,TL-WR741ND,ttyS0,115200,0x07400001,1,4M))
$(eval $(call SingleProfile,TPLINK,64kraw,TLWR740NV3,tl-wr740n-v3,TL-WR741ND,ttyS0,115200,0x07400003,1,4M))
$(eval $(call SingleProfile,TPLINK,64kraw,TLWR741NV1,tl-wr741nd-v1,TL-WR741ND,ttyS0,115200,0x07410001,1,4M))
$(eval $(call SingleProfile,TPLINK,64kraw,TLWR741NV2,tl-wr741nd-v2,TL-WR741ND,ttyS0,115200,0x07410001,1,4M))
$(eval $(call SingleProfile,TPLINK,64kraw,TLWR743NV1,tl-wr743nd-v1,TL-WR741ND,ttyS0,115200,0x07430001,1,4M))
$(eval $(call SingleProfile,TPLINK,64kraw,TLWR841NV3,tl-wr841nd-v3,TL-WR941ND,ttyS0,115200,0x08410003,3,4M))
$(eval $(call SingleProfile,TPLINK,64kraw,TLWR841NV5,tl-wr841nd-v5,TL-WR741ND,ttyS0,115200,0x08410005,1,4M))
$(eval $(call SingleProfile,TPLINK,64kraw,TLWR841NV7,tl-wr841nd-v7,TL-WR841N-v7,ttyS0,115200,0x08410007,1,4M))
$(eval $(call SingleProfile,TPLINK,64kraw,TLWR842V1,tl-wr842n-v1,TL-MR3420,ttyS0,115200,0x08420001,1,8M))
$(eval $(call SingleProfile,TPLINK,64kraw,TLWR941NV2,tl-wr941nd-v2,TL-WR941ND,ttyS0,115200,0x09410002,2,4M))
$(eval $(call SingleProfile,TPLINK,64kraw,TLWR941NV3,tl-wr941nd-v3,TL-WR941ND,ttyS0,115200,0x09410002,2,4M))
$(eval $(call SingleProfile,TPLINK,64kraw,TLWR941NV4,tl-wr941nd-v4,TL-WR741ND,ttyS0,115200,0x09410004,1,4M))
$(eval $(call SingleProfile,TPLINK,64kraw,TLWR1043V1,tl-wr1043nd-v1,TL-WR1043ND,ttyS0,115200,0x10430001,1,8M))
$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,ARCHERC5,archer-c5,ARCHER-C5,ttyS0,115200,0xc5000001,1,16Mlzma))
$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,ARCHERC7V1,archer-c7-v1,ARCHER-C7,ttyS0,115200,0x75000001,1,8Mlzma))
$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,ARCHERC7V2,archer-c7-v2,ARCHER-C7,ttyS0,115200,0xc7000002,1,16Mlzma))
$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,ELM150,el-m150,EL-M150,ttyATH0,115200,0x01500101,1,8Mlzma))
$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,ELMINI,el-mini,EL-MINI,ttyATH0,115200,0x01530001,1,8Mlzma))
$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,GLINET6408A,gl-inet-6408A-v1,GL-INET,ttyATH0,115200,0x08000001,1,8Mlzma))
$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,GLINET6416A,gl-inet-6416A-v1,GL-INET,ttyATH0,115200,0x08000001,1,16Mlzma))
$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,MAC1200R,mc-mac1200r,MC-MAC1200R,ttyS0,115200,0x12000001,1,8Mlzma))
$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLMR10U,tl-mr10u-v1,TL-MR10U,ttyATH0,115200,0x00100101,1,4Mlzma))
$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLMR11UV1,tl-mr11u-v1,TL-MR11U,ttyATH0,115200,0x00110101,1,4Mlzma))
$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLMR11UV2,tl-mr11u-v2,TL-MR11U,ttyATH0,115200,0x00110102,1,4Mlzma))
$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLMR12U,tl-mr12u-v1,TL-MR13U,ttyATH0,115200,0x00120101,1,4Mlzma))
$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLMR13U,tl-mr13u-v1,TL-MR13U,ttyATH0,115200,0x00130101,1,4Mlzma))
$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLMR3020,tl-mr3020-v1,TL-MR3020,ttyATH0,115200,0x30200001,1,4Mlzma))
$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLMR3040V1,tl-mr3040-v1,TL-MR3040,ttyATH0,115200,0x30400001,1,4Mlzma))
$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLMR3040V2,tl-mr3040-v2,TL-MR3040-v2,ttyATH0,115200,0x30400002,1,4Mlzma))
$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLMR3220V2,tl-mr3220-v2,TL-MR3220-v2,ttyATH0,115200,0x32200002,1,4Mlzma))
$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLMR3420V2,tl-mr3420-v2,TL-MR3420-v2,ttyS0,115200,0x34200002,1,4Mlzma))
$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWA701NV2,tl-wa701nd-v2,TL-WA701ND-v2,ttyATH0,115200,0x07010002,1,4Mlzma))
$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWA7210NV2,tl-wa7210n-v2,TL-WA7210N-v2,ttyATH0,115200,0x72100002,1,4Mlzma))
$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWR703,tl-wr703n-v1,TL-WR703N,ttyATH0,115200,0x07030101,1,4Mlzma))
$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWR710,tl-wr710n-v1,TL-WR710N,ttyATH0,115200,0x07100001,1,8Mlzma))
$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWR720NV3,tl-wr720n-v3,TL-WR720N-v3,ttyATH0,115200,0x07200103,1,4Mlzma))
$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWR740NV4,tl-wr740n-v4,TL-WR741ND-v4,ttyATH0,115200,0x07400004,1,4Mlzma))
$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWR741NV4,tl-wr741nd-v4,TL-WR741ND-v4,ttyATH0,115200,0x07410004,1,4Mlzma))
$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWR743NV2,tl-wr743nd-v2,TL-WR741ND-v4,ttyATH0,115200,0x07430002,1,4Mlzma))
$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWA750,tl-wa750re-v1,TL-WA750RE,ttyS0,115200,0x07500001,1,4Mlzma))
$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWR841NV8,tl-wr841n-v8,TL-WR841N-v8,ttyS0,115200,0x08410008,1,4Mlzma))
$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWA830RV2,tl-wa830re-v2,TL-WA830RE-v2,ttyS0,115200,0x08300002,1,4Mlzma))
$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWR841NV9,tl-wr841n-v9,TL-WR841N-v9,ttyS0,115200,0x08410009,1,4Mlzma))
$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWR847NV8,tl-wr847n-v8,TL-WR841N-v8,ttyS0,115200,0x08470008,1,4Mlzma))
$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWR842V2,tl-wr842n-v2,TL-WR842N-v2,ttyS0,115200,0x8420002,1,8Mlzma))
$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWR843NV1,tl-wr843nd-v1,TL-WR841N-v8,ttyS0,115200,0x08430001,1,4Mlzma))
$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWA801NV2,tl-wa801nd-v2,TL-WA801ND-v2,ttyS0,115200,0x08010002,1,4Mlzma))
$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWA850,tl-wa850re-v1,TL-WA850RE,ttyS0,115200,0x08500001,1,4Mlzma))
$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWA860,tl-wa860re-v1,TL-WA860RE,ttyS0,115200,0x08600001,1,4Mlzma))
$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWA901NV3,tl-wa901nd-v3,TL-WA901ND-v3,ttyS0,115200,0x09010003,1,4Mlzma))
$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWR941NV5,tl-wr941nd-v5,TL-WR941ND-v5,ttyS0,115200,0x09410005,1,4Mlzma))
$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWR941NV6,tl-wr941nd-v6,TL-WDR3500,ttyS0,115200,0x09410006,1,4Mlzma))
$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWR1041,tl-wr1041n-v2,TL-WR1041N-v2,ttyS0,115200,0x10410002,1,4Mlzma))
$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWR1043V2,tl-wr1043nd-v2,TL-WR1043ND-v2,ttyS0,115200,0x10430002,1,8M))
$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWR2543,tl-wr2543-v1,TL-WR2543N,ttyS0,115200,0x25430001,1,8Mlzma,-v 3.13.99))
$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWDR3500V1,tl-wdr3500-v1,TL-WDR3500,ttyS0,115200,0x35000001,1,8Mlzma))
$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWDR3600V1,tl-wdr3600-v1,TL-WDR4300,ttyS0,115200,0x36000001,1,8Mlzma))
$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWDR4300V1,tl-wdr4300-v1,TL-WDR4300,ttyS0,115200,0x43000001,1,8Mlzma))
$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWDR4300V1IL,tl-wdr4300-v1-il,TL-WDR4300,ttyS0,115200,0x43008001,1,8Mlzma))
$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWDR4310V1,tl-wdr4310-v1,TL-WDR4300,ttyS0,115200,0x43100001,1,8Mlzma))
$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWDR4900V2,tl-wdr4900-v2,TL-WDR4900-v2,ttyS0,115200,0x49000002,1,8Mlzma))
$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,MW4530RV1,mw4530r-v1,TL-WDR4300,ttyS0,115200,0x45300001,1,8Mlzma))
$(eval $(call SingleProfile,TPLINK-SAFELOADER,64kraw,CPE510,cpe210-220-510-520,CPE510,ttyS0,115200,$$(cpe510_mtdlayout),CPE510))
$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,SMART-300,smart-300,SMART-300,ttyS0,115200,0x93410001,1,8Mlzma))
$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,OOLITE,oolite,GS-OOLITE,ttyATH0,115200,0x3C000101,1,16Mlzma))
$(eval $(call SingleProfile,UAPPRO,64k,UAPPRO,ubnt-uap-pro,UAP-PRO,ttyS0,115200,BZ,BZ,ar934x))
$(eval $(call SingleProfile,UAPPRO,64k,UBNTUNIFIOUTDOORPLUS,ubnt-unifi-outdoor-plus,UBNT-UOP,ttyS0,115200,BZ,BZ,ar7240))
$(eval $(call SingleProfile,UBDEV,64kraw,UBDEV01,ubdev01,UBNT-UF,ttyS0,115200,XM,XM,ar7240))
$(eval $(call SingleProfile,UBNT,64k,UBNTRS,ubnt-rs,UBNT-RS,ttyS0,115200,RS,RSx,ar7100))
$(eval $(call SingleProfile,UBNT,64k,UBNTRSPRO,ubnt-rspro,UBNT-RSPRO,ttyS0,115200,RSPRO,RSPRO,ar7100pro))
$(eval $(call SingleProfile,UBNT,64k,UBNTLSSR71,ubnt-ls-sr71,UBNT-LS-SR71,ttyS0,115200,LS-SR71,LS-SR71,ar7100))
$(eval $(call SingleProfile,UBNTXM,64kraw,RW2458N,rw2458n,RW2458N,ttyS0,115200,XM,XM,ar7240))
$(eval $(call SingleProfile,UBNTXM,64kraw,UBNTAIRROUTER,ubnt-airrouter,UBNT-AR,ttyS0,115200,XM,XM,ar7240))
$(eval $(call SingleProfile,UBNTXM,64kraw,UBNTBULLETM,ubnt-bullet-m,UBNT-BM,ttyS0,115200,XM,XM,ar7240))
$(eval $(call SingleProfile,UBNTXM,64kraw,UBNTROCKETM,ubnt-rocket-m,UBNT-RM,ttyS0,115200,XM,XM,ar7240))
$(eval $(call SingleProfile,UBNTXM,64kraw,UBNTNANOM,ubnt-nano-m,UBNT-NM,ttyS0,115200,XM,XM,ar7240))
$(eval $(call SingleProfile,UBNTXM,64kraw,UBNTUNIFI,ubnt-unifi,UBNT-UF,ttyS0,115200,XM,BZ,ar7240))
$(eval $(call SingleProfile,UBNTXM,64kraw,UBNTUNIFIOUTDOOR,ubnt-unifi-outdoor,UBNT-U20,ttyS0,115200,XM,BZ,ar7240))
$(eval $(call SingleProfile,UBNTXM,64kraw,UBNTNANOMXW,ubnt-nano-m-xw,UBNT-NM-XW,ttyS0,115200,XM,XW,ar934x))
$(eval $(call SingleProfile,UBNTXM,64kraw,UBNTLOCOXW,ubnt-loco-m-xw,UBNT-LOCO-XW,ttyS0,115200,XM,XW,ar934x))
$(eval $(call SingleProfile,UBNTXM,64kraw,UBNTAIRGW,ubnt-air-gateway,UBNT-AGW,ttyATH0,115200,XM,AirGW,ar933x))
$(eval $(call SingleProfile,WHRHPG300N,64kraw,WHRG301N,whr-g301n,WHR-G301N,ttyS0,115200,$$(whrhpg300n_mtdlayout),WHR-G301N))
$(eval $(call SingleProfile,WHRHPG300N,64kraw,WHRHPG300N,whr-hp-g300n,WHR-HP-G300N,ttyS0,115200,$$(whrhpg300n_mtdlayout),WHR-HP-G300N))
$(eval $(call SingleProfile,WHRHPG300N,64kraw,WHRHPGN,whr-hp-gn,WHR-HP-GN,ttyS0,115200,$$(whrhpg300n_mtdlayout),WHR-HP-GN))
$(eval $(call SingleProfile,WHRHPG300N,64kraw,WLAEAG300N,wlae-ag300n,WLAE-AG300N,ttyS0,115200,$$(whrhpg300n_mtdlayout),WLAE-AG300N))
$(eval $(call SingleProfile,WRT400N,64k,WRT400N,wrt400n,WRT400N,ttyS0,115200))
$(eval $(call SingleProfile,WZRHP128K,128kraw,WZRHPG300NH,wzr-hp-g300nh,WZR-HP-G300NH,ttyS0,115200,WZR-HP-G300NH))
$(eval $(call SingleProfile,WZRHP64K,64kraw,WZRHPG300NH2,wzr-hp-g300nh2,WZR-HP-G300NH2,ttyS0,115200,WZR-HP-G300NH2))
$(eval $(call SingleProfile,WZRHP64K,64kraw,WZRHPAG300H,wzr-hp-ag300h,WZR-HP-AG300H,ttyS0,115200,WZR-HP-AG300H))
$(eval $(call SingleProfile,WZRHP64K,64kraw,WZRHPG450H,wzr-hp-g450h,WZR-HP-G450H,ttyS0,115200,WZR-HP-AG450H))
$(eval $(call SingleProfile,WZRHP64K,64kraw,WZR600DHP,wzr-600dhp,WZR-HP-AG300H,ttyS0,115200,WZR-600DHP))
$(eval $(call SingleProfile,WZRHP64K,64kraw,WZR450HP2,wzr-450hp2,WZR-450HP2,ttyS0,115200,WZR-450HP2))
$(eval $(call SingleProfile,Zcomax,64k,ZCN1523H28,zcn-1523h-2-8,ZCN-1523H-2,ttyS0,115200,$$(zcn1523h_mtdlayout)))
$(eval $(call SingleProfile,Zcomax,64k,ZCN1523H516,zcn-1523h-5-16,ZCN-1523H-5,ttyS0,115200,$$(zcn1523h_mtdlayout)))
$(eval $(call SingleProfile,ZyXEL,64k,NBG_460N_550N_550NH,nbg460n_550n_550nh,NBG460N,ttyS0,115200,NBG-460N))
$(eval $(call MultiProfile,AP121,AP121_2M AP121_4M))
$(eval $(call MultiProfile,AP136,AP136_010 AP136_020))
$(eval $(call MultiProfile,ARCHERC7, ARCHERC5 ARCHERC7V1 ARCHERC7V2))
$(eval $(call MultiProfile,EWDORIN, EWDORINAP EWDORINRT EWDORIN16M))
$(eval $(call MultiProfile,OPENMESH,OM2P OM5P MR600 MR900))
$(eval $(call MultiProfile,GLINET,GLINET6408A GLINET6416A))
$(eval $(call MultiProfile,TEW652BRP,TEW652BRP_FW TEW652BRP_RECOVERY))
$(eval $(call MultiProfile,TLMR11U,TLMR11UV1 TLMR11UV2))
$(eval $(call MultiProfile,TLMR3040,TLMR3040V1 TLMR3040V2))
$(eval $(call MultiProfile,TLMR3220,TLMR3220V1 TLMR3220V2))
$(eval $(call MultiProfile,TLMR3420,TLMR3420V1 TLMR3420V2))
$(eval $(call MultiProfile,TLWA701,TLWA701NV1 TLWA701NV2))
$(eval $(call MultiProfile,TLWA7210,TLWA7210NV2))
$(eval $(call MultiProfile,TLWA730RE,TLWA730REV1))
$(eval $(call MultiProfile,TLWA801,TLWA801NV1 TLWA801NV2))
$(eval $(call MultiProfile,TLWA830,TLWA830RV1 TLWA830RV2))
$(eval $(call MultiProfile,TLWA901,TLWA901NV1 TLWA901NV2 TLWA901NV3))
$(eval $(call MultiProfile,TLWA7510,TLWA7510NV1))
$(eval $(call MultiProfile,TLWR720,TLWR720NV3))
$(eval $(call MultiProfile,TLWR740,TLWR740NV1 TLWR740NV3 TLWR740NV4))
$(eval $(call MultiProfile,TLWR741,TLWR741NV1 TLWR741NV2 TLWR741NV4))
$(eval $(call MultiProfile,TLWR743,TLWR743NV1 TLWR743NV2))
$(eval $(call MultiProfile,TLWR841,TLWR841NV15 TLWR841NV3 TLWR841NV5 TLWR841NV7 TLWR841NV8 TLWR841NV9 TLWR847NV8))
$(eval $(call MultiProfile,TLWR842,TLWR842V1 TLWR842V2))
$(eval $(call MultiProfile,TLWR843,TLWR843NV1))
$(eval $(call MultiProfile,TLWR941,TLWR941NV2 TLWR941NV3 TLWR941NV4 TLWR941NV5 TLWR941NV6))
$(eval $(call MultiProfile,TLWR1043,TLWR1043V1 TLWR1043V2))
$(eval $(call MultiProfile,TLWDR4300,TLWDR3500V1 TLWDR3600V1 TLWDR4300V1 TLWDR4300V1IL TLWDR4310V1 MW4530RV1))
$(eval $(call MultiProfile,TUBE2H,TUBE2H8M TUBE2H16M))
$(eval $(call MultiProfile,UBNT,UBNTAIRROUTER UBNTRS UBNTRSPRO UBNTLSSR71 UBNTBULLETM UBNTROCKETM UBNTNANOM UBNTNANOMXW UBNTLOCOXW UBNTUNIFI UBNTUNIFIOUTDOOR UBNTUNIFIOUTDOORPLUS UAPPRO UBNTAIRGW))
$(eval $(call MultiProfile,WNR612V2,REALWNR612V2 N150R))
$(eval $(call MultiProfile,WNR1000V2,REALWNR1000V2 WNR1000V2_VC))
$(eval $(call MultiProfile,WP543,WP543_2M WP543_4M WP543_8M WP543_16M))
$(eval $(call MultiProfile,WPE72,WPE72_4M WPE72_8M WPE72_16M))
$(eval $(call MultiProfile,WPJ558,WPJ558_16M))
$(eval $(call MultiProfile,Minimal,$(SINGLE_PROFILES)))
$(eval $(call MultiProfile,Madwifi,EAP7660D UBNTRS UBNTRSPRO UBNTLSSR71 WP543))
endif # ifeq ($(SUBTARGET),generic)
ifeq ($(SUBTARGET),nand)
$(eval $(call SingleProfile,NetgearNAND,64k,WNDR3700V4,wndr3700v4,WNDR3700_V4,ttyS0,115200,$$(wndr4300_mtdlayout),0x33373033,WNDR3700v4,"",-H 29763948+128+128,wndr4300))
$(eval $(call SingleProfile,NetgearNAND,64k,WNDR4300V1,wndr4300,WNDR4300,ttyS0,115200,$$(wndr4300_mtdlayout),0x33373033,WNDR4300,"",-H 29763948+0+128+128+2x2+3x3,wndr4300))
$(eval $(call SingleProfile,NetgearNAND,64k,R6100,r6100,R6100,ttyS0,115200,$$(r6100_mtdlayout),0x36303030,R6100,"",-H 29764434+0+128+128+2x2+2x2,wndr4300))
$(eval $(call SingleProfile,ZyXELNAND,128k,NBG6716,nbg6716,NBG6716,ttyS0,115200,NBG6716,$$(zyx_nbg6716_mtdlayout),mem=256M))
$(eval $(call MultiProfile,WNDR4300,WNDR3700V4 WNDR4300V1))
endif # ifeq ($(SUBTARGET),nand)
$(eval $(call MultiProfile,Default,$(SINGLE_PROFILES)))
define Image/Build/squashfs
cp $(KDIR)/root.squashfs $(KDIR)/root.squashfs-raw
cp $(KDIR)/root.squashfs $(KDIR)/root.squashfs-64k
$(STAGING_DIR_HOST)/bin/padjffs2 $(KDIR)/root.squashfs-64k 64
cp $(KDIR)/root.squashfs-64k $(BIN_DIR)/$(IMG_PREFIX)-root.squashfs-64k
$(call prepare_generic_squashfs,$(KDIR)/root.squashfs)
dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/$(IMG_PREFIX)-root.$(1) bs=128k conv=sync
endef
define Image/Build/jffs2
dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/$(IMG_PREFIX)-root.$(1) bs=128k conv=sync
endef
define Image/Build/Initramfs
$(call Image/Build/Profile/$(IMAGE_PROFILE),initramfs)
endef
define Image/Prepare
gzip -9 -c $(KDIR)/vmlinux > $(KDIR)/vmlinux.bin.gz
$(call CompressLzma,$(KDIR)/vmlinux,$(KDIR)/vmlinux.bin.lzma)
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
gzip -9 -c $(KDIR)/vmlinux-initramfs > $(KDIR)/vmlinux-initramfs.bin.gz
$(call CompressLzma,$(KDIR)/vmlinux-initramfs,$(KDIR)/vmlinux-initramfs.bin.lzma)
$(call Image/BuildLoader,generic,elf,,,-initramfs)
endif
$(call Image/BuildLoader,generic,elf)
$(call Image/Build/Profile/$(if $(CONFIG_IB),Default,$(IMAGE_PROFILE)),loader)
endef
# $(1): filesystem type.
define Image/Build
$(call Image/Build/$(call rootfs_type,$(1)),$(1))
$(call Image/Build/Profile/$(IMAGE_PROFILE),$(1))
endef
$(eval $(call BuildImage))