ar71xx: add support for compex wpj558
OpenWrt can be flashed with following uboot commands: tftpboot 0x80500000 openwrt-ar71xx-generic-wpj558-16M-squashfs-sysupgrade.bin erase 0x9f030000 +$filesize cp.b $fileaddr 0x9f030000 $filesize Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44620 3c298f89-4303-0410-b956-a3cf2f4a3e73master
Luka Perkov
parent
9c221b1880
commit
7aeb6923b5
|
|
@ -293,6 +293,9 @@ get_status_led() {
|
|||
wp543)
|
||||
status_led="wp543:green:diag"
|
||||
;;
|
||||
wpj558)
|
||||
status_led="wpj558:green:sig3"
|
||||
;;
|
||||
wrt400n)
|
||||
status_led="wrt400n:blue:wps"
|
||||
;;
|
||||
|
|
|
|||
|
|
@ -359,6 +359,13 @@ wpe72)
|
|||
ucidef_set_interfaces_lan_wan "eth1" "eth0"
|
||||
;;
|
||||
|
||||
wpj558)
|
||||
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
|
||||
ucidef_add_switch "switch0" "1" "1"
|
||||
ucidef_add_switch_vlan "switch0" "1" "5 6t"
|
||||
ucidef_add_switch_vlan "switch0" "2" "1 6t"
|
||||
;;
|
||||
|
||||
ap121 |\
|
||||
ap121-mini |\
|
||||
ap96 |\
|
||||
|
|
|
|||
|
|
@ -771,6 +771,9 @@ ar71xx_board_detect() {
|
|||
*WPE72)
|
||||
name="wpe72"
|
||||
;;
|
||||
*WPJ558)
|
||||
name="wpj558"
|
||||
;;
|
||||
*WNDAP360)
|
||||
name="wndap360"
|
||||
;;
|
||||
|
|
|
|||
|
|
@ -180,10 +180,11 @@ platform_check_image() {
|
|||
ap136-020 | \
|
||||
ap135-020 | \
|
||||
ap96 | \
|
||||
bxu2000n-2-a1 | \
|
||||
db120 | \
|
||||
f9k1115v2 |\
|
||||
hornet-ub | \
|
||||
bxu2000n-2-a1 | \
|
||||
wpj558 | \
|
||||
zcn-1523h-2 | \
|
||||
zcn-1523h-5)
|
||||
[ "$magic_long" != "68737173" -a "$magic_long" != "19852003" ] && {
|
||||
|
|
|
|||
|
|
@ -132,6 +132,7 @@ CONFIG_ATH79_MACH_WNR2000_V4=y
|
|||
CONFIG_ATH79_MACH_WNR2200=y
|
||||
CONFIG_ATH79_MACH_WP543=y
|
||||
CONFIG_ATH79_MACH_WPE72=y
|
||||
CONFIG_ATH79_MACH_WPJ558=y
|
||||
CONFIG_ATH79_MACH_WRT160NL=y
|
||||
CONFIG_ATH79_MACH_WRT400N=y
|
||||
CONFIG_ATH79_MACH_WZR_450HP2=y
|
||||
|
|
|
|||
|
|
@ -0,0 +1,174 @@
|
|||
/*
|
||||
* Compex WPJ558 board support
|
||||
*
|
||||
* Copyright (c) 2012 Qualcomm Atheros
|
||||
* Copyright (c) 2012-2013 Gabor Juhos <juhosg@openwrt.org>
|
||||
*
|
||||
* Permission to use, copy, modify, and/or distribute this software for any
|
||||
* purpose with or without fee is hereby granted, provided that the above
|
||||
* copyright notice and this permission notice appear in all copies.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
||||
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
||||
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
||||
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
||||
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
|
||||
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
|
||||
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
||||
*
|
||||
*/
|
||||
|
||||
#include <linux/pci.h>
|
||||
#include <linux/phy.h>
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/ath9k_platform.h>
|
||||
#include <linux/ar8216_platform.h>
|
||||
|
||||
#include <asm/mach-ath79/ar71xx_regs.h>
|
||||
|
||||
#include "common.h"
|
||||
#include "pci.h"
|
||||
#include "dev-ap9x-pci.h"
|
||||
#include "dev-gpio-buttons.h"
|
||||
#include "dev-eth.h"
|
||||
#include "dev-leds-gpio.h"
|
||||
#include "dev-m25p80.h"
|
||||
#include "dev-spi.h"
|
||||
#include "dev-wmac.h"
|
||||
#include "machtypes.h"
|
||||
|
||||
#define WPJ558_GPIO_LED_SIG1 14
|
||||
#define WPJ558_GPIO_LED_SIG2 15
|
||||
#define WPJ558_GPIO_LED_SIG3 22
|
||||
#define WPJ558_GPIO_LED_SIG4 23
|
||||
#define WPJ558_GPIO_BUZZER 4
|
||||
|
||||
#define WPJ558_GPIO_BTN_RESET 17
|
||||
|
||||
#define WPJ558_KEYS_POLL_INTERVAL 20 /* msecs */
|
||||
#define WPJ558_KEYS_DEBOUNCE_INTERVAL (3 * WPJ558_KEYS_POLL_INTERVAL)
|
||||
|
||||
#define WPJ558_MAC_OFFSET 0x1002
|
||||
#define WPJ558_WMAC_CALDATA_OFFSET 0x1000
|
||||
|
||||
static struct gpio_led wpj558_leds_gpio[] __initdata = {
|
||||
{
|
||||
.name = "wpj558:red:sig1",
|
||||
.gpio = WPJ558_GPIO_LED_SIG1,
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.name = "wpj558:yellow:sig2",
|
||||
.gpio = WPJ558_GPIO_LED_SIG2,
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.name = "wpj558:green:sig3",
|
||||
.gpio = WPJ558_GPIO_LED_SIG3,
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.name = "wpj558:green:sig4",
|
||||
.gpio = WPJ558_GPIO_LED_SIG4,
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.name = "wpj558:buzzer",
|
||||
.gpio = WPJ558_GPIO_BUZZER,
|
||||
.active_low = 0,
|
||||
}
|
||||
};
|
||||
|
||||
static struct gpio_keys_button wpj558_gpio_keys[] __initdata = {
|
||||
{
|
||||
.desc = "reset",
|
||||
.type = EV_KEY,
|
||||
.code = KEY_RESTART,
|
||||
.debounce_interval = WPJ558_KEYS_DEBOUNCE_INTERVAL,
|
||||
.gpio = WPJ558_GPIO_BTN_RESET,
|
||||
.active_low = 1,
|
||||
},
|
||||
};
|
||||
|
||||
static struct ar8327_pad_cfg wpj558_ar8327_pad0_cfg = {
|
||||
.mode = AR8327_PAD_MAC_SGMII,
|
||||
.sgmii_delay_en = true,
|
||||
};
|
||||
|
||||
static struct ar8327_pad_cfg wpj558_ar8327_pad6_cfg = {
|
||||
.mode = AR8327_PAD_MAC_RGMII,
|
||||
.txclk_delay_en = true,
|
||||
.rxclk_delay_en = true,
|
||||
.txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
|
||||
.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
|
||||
};
|
||||
|
||||
static struct ar8327_platform_data wpj558_ar8327_data = {
|
||||
.pad0_cfg = &wpj558_ar8327_pad0_cfg,
|
||||
.pad6_cfg = &wpj558_ar8327_pad6_cfg,
|
||||
.port0_cfg = {
|
||||
.force_link = 1,
|
||||
.speed = AR8327_PORT_SPEED_1000,
|
||||
.duplex = 1,
|
||||
.txpause = 1,
|
||||
.rxpause = 1,
|
||||
},
|
||||
.port6_cfg = {
|
||||
.force_link = 1,
|
||||
.speed = AR8327_PORT_SPEED_1000,
|
||||
.duplex = 1,
|
||||
.txpause = 1,
|
||||
.rxpause = 1,
|
||||
},
|
||||
};
|
||||
|
||||
static struct mdio_board_info wpj558_mdio0_info[] = {
|
||||
{
|
||||
.bus_id = "ag71xx-mdio.0",
|
||||
.phy_addr = 0,
|
||||
.platform_data = &wpj558_ar8327_data,
|
||||
},
|
||||
};
|
||||
|
||||
static void __init wpj558_setup(void)
|
||||
{
|
||||
u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
|
||||
|
||||
ath79_register_m25p80(NULL);
|
||||
ath79_register_leds_gpio(-1, ARRAY_SIZE(wpj558_leds_gpio),
|
||||
wpj558_leds_gpio);
|
||||
ath79_register_gpio_keys_polled(-1, WPJ558_KEYS_POLL_INTERVAL,
|
||||
ARRAY_SIZE(wpj558_gpio_keys),
|
||||
wpj558_gpio_keys);
|
||||
|
||||
ath79_register_wmac(art + WPJ558_WMAC_CALDATA_OFFSET, NULL);
|
||||
|
||||
ath79_register_pci();
|
||||
|
||||
mdiobus_register_board_info(wpj558_mdio0_info,
|
||||
ARRAY_SIZE(wpj558_mdio0_info));
|
||||
ath79_register_mdio(0, 0x0);
|
||||
|
||||
ath79_init_mac(ath79_eth0_data.mac_addr, art + WPJ558_MAC_OFFSET, 0);
|
||||
ath79_init_mac(ath79_eth1_data.mac_addr, art + WPJ558_MAC_OFFSET, 0);
|
||||
|
||||
ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
|
||||
|
||||
/* GMAC0 is connected to an AR8327 switch */
|
||||
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
|
||||
ath79_eth0_data.phy_mask = BIT(0);
|
||||
ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
|
||||
ath79_eth0_pll_data.pll_1000 = 0x56000000;
|
||||
|
||||
/* GMAC1 is connected to the SGMII interface */
|
||||
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
|
||||
ath79_eth1_data.speed = SPEED_1000;
|
||||
ath79_eth1_data.duplex = DUPLEX_FULL;
|
||||
ath79_eth1_pll_data.pll_1000 = 0x03000101;
|
||||
|
||||
ath79_register_eth(0);
|
||||
ath79_register_eth(1);
|
||||
}
|
||||
|
||||
MIPS_MACHINE(ATH79_MACH_WPJ558, "WPJ558", "Compex WPJ558", wpj558_setup);
|
||||
|
|
@ -26,3 +26,13 @@ define Profile/WPE72/Description
|
|||
endef
|
||||
|
||||
$(eval $(call Profile,WPE72))
|
||||
|
||||
define Profile/WPJ558
|
||||
NAME:=Compex WPJ558
|
||||
endef
|
||||
|
||||
define Profile/WPJ558/Description
|
||||
Package set optimized for the Compex WPJ558 board.
|
||||
endef
|
||||
|
||||
$(eval $(call Profile,WPJ558))
|
||||
|
|
|
|||
|
|
@ -398,6 +398,7 @@ uap_pro_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,1536k(kernel)
|
|||
ubdev_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7488k(firmware),64k(certs),256k(cfg)ro,64k(EEPROM)ro
|
||||
whrhpg300n_mtdlayout=mtdparts=spi0.0:248k(u-boot)ro,8k(u-boot-env)ro,3712k(firmware),64k(art)ro
|
||||
wlr8100_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),14080k(rootfs),192k(unknown)ro,64k(art)ro,384k(unknown2)ro,15488k@0x40000(firmware)
|
||||
wpj558_mtdlayout_16M=mtdparts=spi0.0:192k(u-boot)ro,16128k(firmware),64k(art)ro
|
||||
wndap360_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,1728k(kernel),6016k(rootfs),64k(nvram)ro,64k(art)ro,7744k@0x50000(firmware)
|
||||
wnr2200_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7808k(firmware),64k(art)ro
|
||||
wnr2000v3_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,3712k(firmware),64k(art)ro
|
||||
|
|
@ -1269,6 +1270,7 @@ $(eval $(call SingleProfile,AthLzma,64k,HORNETUBx2,hornet-ub-x2,HORNET-UB,ttyATH
|
|||
$(eval $(call SingleProfile,AthLzma,64k,PB92,pb92,PB92,ttyS0,115200,$$(pb92_mtdlayout),KRuImage))
|
||||
$(eval $(call SingleProfile,AthLzma,64k,TUBE2H16M,tube2h-16M,TUBE2H,ttyATH0,115200,$$(alfa_mtdlayout_16M),KRuImage,65536))
|
||||
$(eval $(call SingleProfile,AthLzma,64k,WLR8100,wlr8100,WLR8100,ttyS0,115200,$$(wlr8100_mtdlayout),KRuImage))
|
||||
$(eval $(call SingleProfile,AthLzma,64k,WPJ558_16M,wpj558-16M,WPJ558,ttyS0,115200,$$(wpj558_mtdlayout_16M),KRuImage,65536))
|
||||
|
||||
$(eval $(call SingleProfile,Belkin,64k,F9K1115V2,f9k1115v2,F9K1115V2,ttyS0,115200,$$(f9k1115v2_mtdlayout),BR-6679BAC))
|
||||
|
||||
|
|
@ -1504,6 +1506,7 @@ $(eval $(call MultiProfile,WNR612V2,REALWNR612V2 N150R))
|
|||
$(eval $(call MultiProfile,WNR1000V2,REALWNR1000V2 WNR1000V2_VC))
|
||||
$(eval $(call MultiProfile,WP543,WP543_2M WP543_4M WP543_8M WP543_16M))
|
||||
$(eval $(call MultiProfile,WPE72,WPE72_4M WPE72_8M WPE72_16M))
|
||||
$(eval $(call MultiProfile,WPJ558,WPJ558_16M))
|
||||
|
||||
$(eval $(call MultiProfile,Minimal,$(SINGLE_PROFILES)))
|
||||
$(eval $(call MultiProfile,Madwifi,EAP7660D UBNTRS UBNTRSPRO UBNTLSSR71 WP543))
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
--- a/arch/mips/ath79/machtypes.h
|
||||
+++ b/arch/mips/ath79/machtypes.h
|
||||
@@ -16,22 +16,189 @@
|
||||
@@ -16,22 +16,190 @@
|
||||
|
||||
enum ath79_mach_type {
|
||||
ATH79_MACH_GENERIC = 0,
|
||||
|
|
@ -178,6 +178,7 @@
|
|||
+ ATH79_MACH_WNR1000_V2, /* NETGEAR WNR1000 v2 */
|
||||
+ ATH79_MACH_WP543, /* Compex WP543 */
|
||||
+ ATH79_MACH_WPE72, /* Compex WPE72 */
|
||||
+ ATH79_MACH_WPJ558, /* Compex WPJ558 */
|
||||
+ ATH79_MACH_WRT160NL, /* Linksys WRT160NL */
|
||||
+ ATH79_MACH_WRT400N, /* Linksys WRT400N */
|
||||
+ ATH79_MACH_WZR_HP_AG300H, /* Buffalo WZR-HP-AG300H */
|
||||
|
|
@ -263,7 +264,7 @@
|
|||
config ATH79_MACH_AP121
|
||||
bool "Atheros AP121 reference board"
|
||||
select SOC_AR933X
|
||||
@@ -11,62 +75,970 @@ config ATH79_MACH_AP121
|
||||
@@ -11,62 +75,979 @@ config ATH79_MACH_AP121
|
||||
select ATH79_DEV_M25P80
|
||||
select ATH79_DEV_USB
|
||||
select ATH79_DEV_WMAC
|
||||
|
|
@ -498,6 +499,15 @@
|
|||
+ select ATH79_DEV_USB
|
||||
+ select MYLOADER
|
||||
+
|
||||
+config ATH79_MACH_WPJ558
|
||||
+ bool "Compex WPJ558 board support"
|
||||
+ select SOC_QCA955X
|
||||
+ select ATH79_DEV_ETH
|
||||
+ select ATH79_DEV_GPIO_BUTTONS
|
||||
+ select ATH79_DEV_LEDS_GPIO
|
||||
+ select ATH79_DEV_M25P80
|
||||
+ select ATH79_DEV_WMAC
|
||||
+
|
||||
+config ATH79_MACH_DGL_5500_A1
|
||||
+ bool "D-Link DGL-5500 A1 support"
|
||||
+ select SOC_QCA955X
|
||||
|
|
@ -1382,7 +1392,7 @@
|
|||
endif
|
||||
--- a/arch/mips/ath79/Makefile
|
||||
+++ b/arch/mips/ath79/Makefile
|
||||
@@ -38,9 +38,118 @@ obj-$(CONFIG_ATH79_ROUTERBOOT) += route
|
||||
@@ -38,9 +38,119 @@ obj-$(CONFIG_ATH79_ROUTERBOOT) += route
|
||||
#
|
||||
# Machines
|
||||
#
|
||||
|
|
@ -1491,6 +1501,7 @@
|
|||
+obj-$(CONFIG_ATH79_MACH_WNR2200) += mach-wnr2200.o
|
||||
+obj-$(CONFIG_ATH79_MACH_WP543) += mach-wp543.o
|
||||
+obj-$(CONFIG_ATH79_MACH_WPE72) += mach-wpe72.o
|
||||
+obj-$(CONFIG_ATH79_MACH_WPJ558) += mach-wpj558.o
|
||||
+obj-$(CONFIG_ATH79_MACH_WRT160NL) += mach-wrt160nl.o
|
||||
+obj-$(CONFIG_ATH79_MACH_WRT400N) += mach-wrt400n.o
|
||||
+obj-$(CONFIG_ATH79_MACH_WZR_HP_G300NH) += mach-wzr-hp-g300nh.o
|
||||
|
|
|
|||
Loading…
Reference in New Issue