Commit Graph

1020 Commits (f7a220b2f62724bccb76abe622281808e3f6f061)

Author SHA1 Message Date
Felix Fietkau 8b30afb005 lantiq: fix a race condition in the SPI driver leading to rx FIFO overflows (and subsequent timeouts)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47770
2015-12-04 20:26:22 +00:00
Felix Fietkau 9330296932 lantiq: re-enable spi-xway for TD-W89X0 now that it is fixed
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47768
2015-12-04 18:35:20 +00:00
Felix Fietkau b963cec01c lantiq: fix xway spi driver timeout issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47767
2015-12-04 18:35:12 +00:00
Felix Fietkau ae10274239 lantiq: clean up the xrx200 ethernet driver and fix stability issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47766
2015-12-04 17:44:06 +00:00
Felix Fietkau 435e7fb295 lantiq: move esi calls to dsl_cpe_control scripts to fix ordering wrt. loading vr9 drivers
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47764
2015-12-04 17:42:51 +00:00
Jo-Philipp Wich 5ebc5de49d lantiq: switch from uci-defaults to board.d
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47755
2015-12-04 12:32:44 +00:00
Felix Fietkau 46112609d0 lantiq: fix up m25p80 device ids (#20975)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47690
2015-12-02 17:20:39 +00:00
Hauke Mehrtens 34e0d3cb5a lantiq: fix compile error
This fixes a problem introduced in r47624.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 47628
2015-11-24 20:12:21 +00:00
Felix Fietkau bb1c915f1e kernel: update m25p80 in 4.1 to the latest version from 4.4-rc1
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47624
2015-11-24 18:59:28 +00:00
John Crispin 570c35a599 lantiq: add phy led config support over devicetree bindings
This patch adds the posibility to config the led behaviour of the lantiq phys
over the devicetree bindings.It patches the 0023-NET-PHY-adds-driver-for-lantiq-PHY11G
for 3.18 and 4.1. I have also added a register description overview for
applicable values. This goes to the documentation folder in the linux kernel.

Signed-off-by: Florian Eckert <Eckert.Florian@googlemail.com>

SVN-Revision: 47566
2015-11-21 21:25:43 +00:00
John Crispin 0206a400cf lantiq: tweak DWC2 default parameters
This patch improves the default configuration of DWC2 on lantiq SoCs
somewhat:
 * Set maximum packet count to largest allowed value by the DWC2 (511)
 * Use 16-bit DMA bursts
 * Divide fifo buffers more evenly

Default fifo buffer sizes from original ltq-hcd driver seem really
irrational. For example according to DWC2 data book rxfifo size of 240
will not fit even a single full length USB packet. On the other hand
non-periodic tx fifo size of 240 is more than enough to fit one complete
packet.

Change the sizes around to improve the situation and to fix some issues
especially with isochronous USB transfers.

Signed-off-by: Antti Seppälä <a.seppala@gmail.com>

SVN-Revision: 47563
2015-11-21 21:25:20 +00:00
Hauke Mehrtens ff64ae8293 lantiq: add clk_round_rate()
This adds a basic implementation of clk_round_rate()
The clk_round_rate() function is called by multiple drivers and
subsystems now and the lantiq clk driver is supposed to export this,
but doesn't do so, this causes linking problems like this one:
ERROR: "clk_round_rate" [drivers/media/v4l2-core/videodev.ko] undefined!

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 47254
2015-10-25 22:46:46 +00:00
Hauke Mehrtens da94b00df5 kernel: update kernel 4.1 to version 4.1.11
https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.1.11

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 47252
2015-10-25 17:32:01 +00:00
John Crispin e1d585d99f lantiq: Synchronize access to the DSL command pipe
Whenever two processes were executing different commands at the same
time then one of the commands sometimes got the response of the other
command.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 47213
2015-10-19 10:08:56 +00:00
John Crispin b7e4c8d3bf lantiq: Print the status register whenever an error occurs
This should help finding potential problems with the SPI driver.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 47209
2015-10-19 10:08:29 +00:00
John Crispin 2c7d536780 lantiq: Fixed reading the number of RX FIFOs in the SPI driver
Until now the SPI driver used the TX bits for the RX FIFO. This seems
uncritical for now since both are equals on my devices (VR9), but this
could cause problems on other SoCs.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 47208
2015-10-19 10:08:18 +00:00
John Crispin 42c9a85e8e Revert "lantiq: activate spi-xway on TDW89X0"
This reverts commit 68c2e4789b4f071ee75d39248f4d08fe8283eb28.

commit r47159 was bad

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 47207
2015-10-19 10:08:12 +00:00
John Crispin f457ae99f2 lantiq: fix use of IRQF_DISABLED in lantiq kmods
The IRQF_DISABLED flag was removed in kernel 4.1 with commit
"genirq: Remove the deprecated 'IRQF_DISABLED' request_irq() flag entirely" [1].

Therefore the compilation of ltq-hcd and ltq-vmmc kmods fails.

[1] https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=d8bf368d0631d4bc2612d8bf2e4e8e74e620d0cc

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 47180
2015-10-11 16:24:43 +00:00
John Crispin 2fc473cf3f lantiq: bugfix wrong non pre-emptive crc errors output
This patch fixes a wrong non pre-emptive crc errors output of
dsl_control.sh status.

Signed-off-by: Luca Debernardi <luca.debernardi@gmail.com>

SVN-Revision: 47172
2015-10-11 16:23:26 +00:00
John Crispin 02197db96f lantiq: activate spi-xway on TDW89X0
use the hardware spi core in favour of spi-gpio.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 47159
2015-10-07 12:12:48 +00:00
John Crispin 33f9165a63 lantiq: spi driver fix
adds a missing wait busy. based on the UGW patch 2060..

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 47158
2015-10-07 12:12:35 +00:00
John Crispin 2210e821e1 lantiq: bugfix luci lantiq_dsl status
Signed-off-by: Florian Eckert <Eckert.Florian@googlemail.com>
Signed-off-by: Helge Mader <hmader@tdt.de>
Reported-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47152
2015-10-07 08:00:54 +00:00
John Crispin a0543c2bdc lantiq: several ARV7519RW22 fixes
Fixes ARV7519RW22 flash register (only 1 flash).
Power LED is green, not red.
Rename message LEDs to internet.
Add LEDs configuration (lan, wan, power).
Enable switch VLANs.
Fix secondary USB.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: José Vázquez Fernández <ppvazquezfer@gmail.com>

SVN-Revision: 47132
2015-10-05 10:28:34 +00:00
John Crispin 2795592d91 lantiq: make v4.1 the default kernel
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 47131
2015-10-05 10:28:26 +00:00
John Crispin 161179f40b lantiq: Add target TP-Link TD-W8980
The device is similar to the TD-W8970, beside a different Atheros 2.4 GHz
wireless chip and the additional, PCI connected, WAVE300 5 GHz wireless.

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 47130
2015-10-05 10:28:19 +00:00
John Crispin f2f50ad762 lantiq: fix ath_pci_fixup hang on bridged devices
Port of r41856.

In contrast to the brcm63xx target, it isn't sufficient to enable/disable
the bridge. The device needs to be enabled/disabled to fix the hang. The
bridge will be automatically enabled by the time the connected device is
enabled.

Fixes boot on TD-W8980.

Signed-off-by: Mathias Kresin <openwrt@kresin.me>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 47129
2015-10-05 10:28:12 +00:00
John Crispin c5cc3d9610 lantiq: Change the data-type of mac address in ETOP driver
This adds the changes from r46219 to the linux 4.1 patches as well.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 47128
2015-10-05 10:28:07 +00:00
John Crispin cea7c66ef8 lantiq: bugfix uninitialized variables
Signed-off-by: Florian Eckert <Eckert.Florian@googlemail.com>
Reported-by: Sylwester Petela <sscapi@gmail.com>

SVN-Revision: 47127
2015-10-05 10:27:55 +00:00
Matteo Croce 70da7324cd lantiq: fix binutils 2.15.1 build
SVN-Revision: 47105
2015-10-04 22:03:04 +00:00
Hauke Mehrtens 0cd478518f kernel: update 4.1 to 4.1.10
Fixes a regression on spi flash devices (upstream commit 1583eaece6fa).

Changelogs:
* https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.1.7
* https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.1.8
* https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.1.9
* https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.1.10

096-ipv4-off-by-one-in-continuation-handling-in-proc-net.patch was applied
upstream and dropped.

Signed-off-by: Mathias Kresin <openwrt@kresin.me>
[update from 4.1.9 to 4.1.10]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 47104
2015-10-04 11:34:39 +00:00
Rafał Miłecki 90e1b84f15 lantiq: update list on NAND devices in platform_pre_upgrade
Meanwhile BTHOMEHUBV5A board was added.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 46941
2015-09-15 11:49:33 +00:00
John Crispin 57c8708d64 lantiq: add platform_pre_upgrade for sysupgrade
As explained in recent sysupgrade/nand.sh commits, current NAND
sysupgrade is a bit misleading because of nand_do_platform_check
behavior. It leaves a special mark in /tmp/sysupgrade-nand-path
triggering some diffent code path in nand_upgrade_stage1.

The plan is to have the check function only check the image and nothing
else. Then platform code (platform_pre_upgrade) should trigger NAND
specific upgrade path. This is what this patch implements.

Please note that because of current nand_upgrade_stage1 implementation
this patch doesn't change any behaior yet. It only prepares lantiq
target for changing nand_do_platform_check (it will be possible after
preparing all other targets as well).

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 46939
2015-09-15 06:13:07 +00:00
John Crispin 06a180d027 lantiq: get more status information from xDSL
Signed-off-by: Florian Eckert <Eckert.Florian@googlemail.com>
Signed-off-by: Helge Mader <hmader@tdt.de>
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: Andre Heider <a.heider@gmail.com>

SVN-Revision: 46917
2015-09-14 20:08:39 +00:00
John Crispin 404b183aa8 lantiq: Add AR9 compatibility bits to DWC2 driver
Add AR9 DTS definition to be recognized by the DWC2 driver.

The same driver parameters can be mostly used except that some boards
seem to erroneously report OTG HNP/SRP capability of the USB HCD.
Forcing the HNP/SRP off allows these boards to work with the DWC2 as well.

Signed-off-by: Antti Seppälä <a.seppala@gmail.com>

SVN-Revision: 46915
2015-09-14 20:08:15 +00:00
John Crispin 4595440215 lantiq: Introduce DWC2 compatible DTS definitions for AR9 USB
Since the AR9 USB is very similar to the VR9 USB it too can be used with
the upstream DWC2 driver.

Here are the DTS definitions which make it compatible with the DWC2
driver.

Signed-off-by: Antti Seppälä <a.seppala@gmail.com>

SVN-Revision: 46914
2015-09-14 20:08:07 +00:00
John Crispin 1f4124ceb0 lantiq: Initialize USB on AR9 platform
Based on the ltq-hcd driver the AR9 USB can be initialized the same way
as the VR9 platform. Use the same initialization bits for both
platforms.

Signed-off-by: Antti Seppälä <a.seppala@gmail.com>

SVN-Revision: 46913
2015-09-14 20:07:23 +00:00
Hauke Mehrtens 89ce027c08 kernel: add CONFIG_MIPS_CDMM config option
This driver was added in kernel 4.1.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 46881
2015-09-11 20:31:32 +00:00
Felix Fietkau 6c1adb3eec lantiq: Use the BAR0 base address in the ath PCI fixup code
Fixes support for AR9287 on TP-Link TD-W8980 and possibly other devices
which have an ath wifi chip at a PCI address other than 0xb8000000
(TD-W8980 for example has it's wifi chip at 0xbc000000).

Signed-off-by: Geoffrey McRae <geoff@spacevs.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 46869
2015-09-11 16:35:46 +00:00
Jonas Gorski 7d6cff4882 kernel: update 3.18 to 3.18.21
Changelog:
 * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.21

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46768
2015-09-02 10:18:15 +00:00
Jonas Gorski 1bc35a08d1 lantiq: remove dead EASY33016 image recipe
Support for lantiq_svip_be has been removed a while ago, so EASY33016
images weren't buildable anymore. Remove the recipes as well as gzip
compressed kernel support, as EASY33016 was the last user of it.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46760
2015-08-30 12:18:22 +00:00
Jonas Gorski 2d379e796f kernel: update 4.1 to 4.1.6
Changelog:
* https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.1.6

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46713
2015-08-23 18:06:11 +00:00
John Crispin 4582d7e8f5 lantiq: Support newer versions of the PEF7071 ethernet PHYs
The BT Home Hub 5A uses three PEF7071 with PHY ID 0xd565a401. Daniel's
PHY driver (for his u-boot sources) already supports that PHY because
it uses a PHY ID mask of 0xfffffff8.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 46670
2015-08-17 11:25:57 +00:00
Jonas Gorski bed330204a image.mk: move KDIR_TMP definition to a central location
Instead of each target defining it the same, move the KDIR_TMP
definition to include/image.mk. In addition Image/Build/SysupgradeNAND
already requires KDIR_TMP to be set, so it makes sense to have it
globally defined.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46592
2015-08-14 10:20:53 +00:00
Jonas Gorski dbe4173b20 image: fix jffs2(_nand) image generation
Variables dependend on JFFS2_BLOCKSIZE and NANDBLOCK_SIZE are used
for template generation, so need to be present before inclusion of
image.mk in target image Makefiles.
So move all declarations to before any includes.

Fixes: r42878 ("image.mk: clean up and parallelize mkfs calls")
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46564
2015-08-05 13:55:52 +00:00
Jonas Gorski caa73eb95c kernel: update 4.1 to 4.1.4
Changelog:
 * https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.1.4

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
[jogo: fix brcm2708 patches, refresh target patches]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46560
2015-08-05 13:55:14 +00:00
John Crispin 9c0ed4ce5c lantiq: Silence the PCIe error interrupt printk also in 4.1
This ports 9e2a7b779e6f0914395da3657b00f0ac00209bfd to the 4.1 patches.
I forgot this when preparing the initial 4.1 patch.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 46453
2015-07-24 09:09:07 +00:00
Jonas Gorski cc42b1049b kernel: refresh patches for 4.1
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46441
2015-07-22 12:51:11 +00:00
Hauke Mehrtens 29039f51b3 kernel: refresh patches on linux 3.18
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 46308
2015-07-12 13:47:16 +00:00
John Crispin b9963bbe80 lantiq: Add support for Arcadyan ARV8539PW22 (Speedport W 504V)
lantiq: Add support for Arcadyan ARV8539PW22 (Speedport W 504V)

Signed-off-by: Jannis Pinter <jannis@pinterjann.is>

SVN-Revision: 46224
2015-07-07 13:44:58 +00:00
John Crispin 6bdd209f15 lantiq: Add support for the BT Home Hub 5A
u-boot support depends on the next "upstream" version ([0]) from
Daniel Schwierzeck.
Since the installation process is quite complicated a "how to" was
added to the wiki: [1]

[0] https://github.com/danielschwierzeck/u-boot-lantiq/tree/openwrt/v2014.01-next
[1] http://wiki.openwrt.org/toh/bt/homehub_v5a

V2: Use the correct PCI interrupt (fixes 2.4GHz wifi)
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 46223
2015-07-07 13:44:53 +00:00
John Crispin 2748df1c98 lantiq: Silence the printk when a PCIe error interrupt arrives
Basically the only error I am seeing is "Correctable Error". Also newer
lantiq PCIe drivers have this message wrapped in a "if debug enabled"
block. So it should be safe to disable this warning.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 46222
2015-07-07 13:44:37 +00:00
John Crispin 415fe71d00 lantiq: Make the MEI address available for kernel drivers
Newer DSL driver versions depend on the address information.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 46221
2015-07-07 13:44:32 +00:00
John Crispin fa9e259729 lantiq: Change the data-type of mac address in ETOP driver
Make it consistent with the net_device struct and the xrx200 driver

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 46219
2015-07-07 13:44:12 +00:00
John Crispin ff08b09570 lantiq: Add support for linux 4.1
All (still relevant) patches were refresh.
The following patches were dropped because they are applied upstream:
- 0003-MIPS-lantiq-handle-vmmc-memory-reservation.patch
- 0005-MIPS-lantiq-add-reset-controller-api-support.patch
- 0006-MIPS-lantiq-reboot-gphy-on-restart.patch
- 0009-MIPS-lantiq-command-line-work-around.patch
- 0010-MIPS-lantiq-export-soc-type.patch
- 0011-lantiq-add-support-for-xrx200-firmware-depending-on-.patch
- 0037-MIPS-lantiq-move-eiu-init-after-irq_domain-register.patch

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 46216
2015-07-07 13:43:47 +00:00
Jonas Gorski 901a7fa067 kernel: update 3.18 to 3.18.17
Changelog:
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.17

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46150
2015-06-30 23:26:09 +00:00
Jonas Gorski 9a59b350b7 kernel: update 3.18 to 3.18.16
Changelogs:

* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.15
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.16

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46011
2015-06-17 09:54:55 +00:00
John Crispin 262f6869a2 lantiq: Backport gpio-stp-xway to fix the highest bits of the PHY LEDs
This fixes the LAN2 LED on Arcadyan VGV7510KW22.

SVN-Revision: 45899
2015-06-05 14:11:51 +00:00
John Crispin ca1db6b5ce lantiq: Add support for Arcadyan VGV7510KW22 (known as o2 Box 6431)
SVN-Revision: 45897
2015-06-05 14:11:36 +00:00
John Crispin 2575637497 lantiq: Make the CRC32 poly value configurable per device
This also adds the old hardcoded value to the VGV7519BRN profile to make
sure that images are still generated correctly.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 45882
2015-06-03 13:58:57 +00:00
Jonas Gorski 43c0a725af lantiq: fix VG3503J rootfs offset
In r44391 the kernel partion size was increased to allow larger kernels,
but the rootfs partition offset was missed. Fix this by setting the
rootfs offset to the expected value.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45868
2015-06-01 12:37:24 +00:00
John Crispin b34988d5d0 lantiq: fix imagebuilder
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 45851
2015-05-30 20:28:57 +00:00
John Crispin 230efe318f lantiq: Fix initialization of the PCI IRQs when PCIe is also enabled
There are already ifx_pcie_bios_{map_irq,plat_dev_init} hooks defined in
ifxmips_pcie.c. Instead of defining a new hook we simply re-use the
existing ones (this is basically what the lantiq BSP code does).

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 45718
2015-05-23 15:25:59 +00:00
John Crispin 390924e662 lantiq: Fix PCIe bus when PCI is also enabled.
The PCIe bus seems to require a hack/workaround when PCI is enabled as
well. Unfortunately this is guarded by an CONFIG_IFX_PCI ifdef, which is
only defined in lantiq's BSP code. The config symbol for the upstream
lantiq PCI driver is CONFIG_PCI_LANTIQ.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 45717
2015-05-23 15:25:51 +00:00
Jonas Gorski 76d079204d kernel: update 3.18 to 3.18.14
Changelogs:

* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.12
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.13
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.14

Build tested on brcm63xx and ipq806x, runtested on brcm63xx.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45711
2015-05-21 19:32:46 +00:00
Imre Kaloz f86c07d8d4 The ability to read MAC addresses from MTD is useful for other targets besides ramips and lantiq as well.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 45596
2015-05-03 17:56:32 +00:00
John Crispin 85bf288428 lantiq: remove arphaned folder
the new buildbot was picking this up as a valid target.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 45068
2015-03-27 19:47:22 +00:00
John Crispin 29cf72ac07 lantiq/xrx200: cleanup default packages
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44867
2015-03-17 09:44:06 +00:00
John Crispin 986af9e64e lantiq: make xrx200 targets use the upstream dwc2 driver
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44857
2015-03-17 09:42:56 +00:00
John Crispin 257671615b lantiq: drop 3.14 support
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44812
2015-03-16 07:39:52 +00:00
Felix Fietkau d8d9282372 lantiq: add a better fix to strip FCS from ethernet packets on XRX200
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44771
2015-03-15 09:47:34 +00:00
Felix Fietkau 55cdb4dbb3 lantiq: enable atm-esi by default for xrx200
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44769
2015-03-15 07:57:51 +00:00
John Crispin da3fd5dbf9 kenrel: refresh patches
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44678
2015-03-11 17:08:46 +00:00
John Crispin d5c250b91a lantiq: make the new dwc2 support only work for vr9
danube needs to be added

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44677
2015-03-11 17:08:40 +00:00
John Crispin 2a390925df lantiq: Convert Zyxel P-2812HNU-FX and TP-Link TD-W8970 to support dwc2
Here the device tree entry for ifxhcd is listed as compatible with one
supported in dwc2 (after patching the dwc driver appropriately).

A second entry is added to support the second core of the hcd. This
entry is listed to be compatible with only dwc2. Done this way there
should be backwards support for both hcd drivers (ltq-hcd and dwc2)

Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com>

SVN-Revision: 44676
2015-03-11 17:08:32 +00:00
John Crispin 72822d0192 lantiq: Use platform endianness when accessing dwc2 registers
This patch switches calls to readl/writel to their
dwc2_readl/dwc2_writel equivalents which preserve platform endianness.

This patch is necessary to access dwc2 registers correctly on big
endian systems such as the mips based SoCs made by Lantiq. Then dwc2
can be used to replace ifx-hcd driver for Lantiq platforms found e.g.
in OpenWrt.

The patch was autogenerated with the following commands:
$EDITOR core.h
sed -i "s/\<readl\>/dwc2_readl/g" *.c hcd.h hw.h
sed -i "s/\<writel\>/dwc2_writel/g" *.c hcd.h hw.h

Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com>

SVN-Revision: 44675
2015-03-11 17:08:26 +00:00
John Crispin d77c857509 lantiq: Add sensible hw-defaults for dwc2
Lantiq driver does not work with autodetected fifo sizes so use ones
from original ltq-hcd driver in dwc2. Other values can be
autodetected.

Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com>

SVN-Revision: 44674
2015-03-11 17:08:15 +00:00
John Crispin 2ddcf4c46e lantiq: Configure gpio power output pin when initializing dwc2 usb
Port gpio code from original ltq-hcd driver to dwc2.

Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com>

SVN-Revision: 44673
2015-03-11 17:08:08 +00:00
John Crispin a23da431dc lantiq: Add usb initialization bits from ltq-hcd to platform init
Add VR9 specific usb initialization bits from ltq-hcd to platform
initialization.

This patch is more of a proof-of-concept than production quality
since the initialization registers are different on other lantiq
platforms.

Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com>

SVN-Revision: 44672
2015-03-11 17:08:02 +00:00
John Crispin d15ac306fa kernel: move KERNFS to generic config
KERNFS symbol is selected by SYSFS, so place it in generic config.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44615
2015-03-06 07:56:47 +00:00
John Crispin f04a268a04 kernel: disable ARCH_NEEDS_CPU_IDLE_COUPLED
Disable ARCH_NEEDS_CPU_IDLE_COUPLED by-default in generic config, since
only one platfrom (omap) needs them.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44614
2015-03-06 07:56:34 +00:00
John Crispin 6617845711 kernel: move MTD_SPLIT_SUPPORT to generic config
CONFIG_MTD_SPLIT_SUPPORT symbol default value is 'y' and many platform
specific configs explicitly enables it, while no one platform disables
this symbol. So place it in generic config and remove from platform
specific configs.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44612
2015-03-06 07:56:08 +00:00
John Crispin 7886cced18 kernel: remove GENERIC_NET_UTILS from platform configs
CONFIG_GENERIC_NET_UTILS is selected by CONFIG_NET and already enabled
in generic config, so we don't need this symbol in platform specific
configurations.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44611
2015-03-06 07:55:57 +00:00
Jonas Gorski 3139140339 kernel: move CONFIG_MIPS_O32_FP64_SUPPORT to generic configs
Most MIPS targets have it disabled, so move the symbol to the generic
configs to keep target configs small.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44583
2015-03-01 11:37:15 +00:00
John Crispin e07c4f2150 lantiq: disable buffered writes on Intel command set flash
Some Lantiq SoCs are not able to use buffered writes properly with
Intel command set flash due to the way NOR addresses on EBU are
manipulated. This patch disables buffered writes on those devices.
The only device affected at the moment is ARV4510PW, others use
AMD/Fujitsu command set.

Signed-off-by: Matti Laakso <malaakso@elisanet.fi>

SVN-Revision: 44451
2015-02-14 20:48:32 +00:00
John Crispin a15dd8ec78 lantiq: Fix flash for targets with NO_XIP
For targets with NO_XIP ltq_mtd->map[i].phys equals -1 and devm_ioremap fails.
Fix this by using pdev->resource[i].start instead.

Signed-off-by: Matti Laakso <malaakso@elisanet.fi>

SVN-Revision: 44450
2015-02-14 20:48:26 +00:00
John Crispin 440d9ddf7f lantiq: fix DGN3500 root device
Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>

SVN-Revision: 44428
2015-02-13 07:29:17 +00:00
John Crispin dbfb21ee90 lantiq: make m25p80 work again
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44421
2015-02-12 11:15:56 +00:00
John Crispin 1eb616764e lantiq: fix mac addr assignment inside lantiq_etop
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44420
2015-02-12 09:17:04 +00:00
John Crispin c5b7e1aaf4 lantiq: PCI should be enabled on vrx200
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44419
2015-02-12 08:23:45 +00:00
John Crispin f90d9d486a lantiq: fix VG3503J partition table for newer kernels
the kernel has increased and does not fit into the 1,5MB anymore.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44391
2015-02-11 10:17:38 +00:00
John Crispin 1c0c1ebc6b lantiq: td-w8970: fix failsafe mode
Fix failsafe mode for TD-W8970, register interface for preinit.

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 44353
2015-02-09 12:14:48 +00:00
John Crispin 1c9dc26ce9 lantiq: td-w8970: fix reset button
For TP-LINK TD-W8970 button should work as "reset", not "BTN_1".

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 44352
2015-02-09 12:14:32 +00:00
John Crispin 826b461427 lantiq: add 3.18 support
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44348
2015-02-09 12:13:25 +00:00
Luka Perkov 683da1384b lantiq: fix patches after 3.14.32 bump
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 44320
2015-02-08 15:09:45 +00:00
John Crispin 74b3597d07 lantiq: correct value for fpi clock on ar9
This adds a patch to target/linux/lantiq/patches-3.14
fixing a bug clock code on ar9. The current version returns
the wrong value for the fpi clock frequency in some
cases.

See discussion for further details:
https://lists.openwrt.org/pipermail/openwrt-devel/2015-January/030688.html

I'm not sure about the patch naming and numbering convention.
Do please let me know it this is not OK.

Many thanks,

Ben Mulvihill

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>

SVN-Revision: 44083
2015-01-23 12:32:28 +00:00
John Crispin fcbc21890c lantiq: DGN3500 cleanups
This patch builds on the previous three to streamline support for the
Netgear DGN3500.

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>

SVN-Revision: 44032
2015-01-18 09:41:04 +00:00
John Crispin 4424620c51 lantiq: Restore call to orphaned etop function
It seems the call to ltq_get_eth_mac() disappeared at some point. This
patch puts it where it currently most makes sense.

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>

SVN-Revision: 44031
2015-01-18 09:40:58 +00:00
John Crispin c80b429fc1 lantiq: Fix initscript issue
Currently this initscript fails if the macaddr has any leading zeroes.
This patch corrects the problem.

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>

SVN-Revision: 44029
2015-01-18 09:40:47 +00:00
John Crispin 8cbf97e936 Remove old P2812HNUFX dts
Remove unused P2812HNUFX board definition.

Signed-off-by: Sylwester Petela <sscapi@gmail.com>

SVN-Revision: 43988
2015-01-17 07:07:21 +00:00
John Crispin 7f77870c19 Add profile and userspace for P2812HNUF1/3, switch from UBI_GLUEBI to UBI_BLOCK
Add profile and userspace for P2812HNUF1/3, switch from UBI_GLUEBI to UBI_BLOCK

Signed-off-by: Sylwester Petela <sscapi@gmail.com>

SVN-Revision: 43987
2015-01-17 07:07:15 +00:00
John Crispin b4d2b69c43 lantiq: Add device tree for P2812HNUF1 and P2812HNUF3
Add device tree for P2812HNUF1 and P2812HNUF3.

Signed-off-by: Sylwester Petela <sscapi@gmail.com>

SVN-Revision: 43986
2015-01-17 07:07:06 +00:00
John Crispin c9a390f9e1 lantiq: BT Home Hub 3A - userspace
BT Home Hub 3A - userspace

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>

SVN-Revision: 43879
2015-01-08 20:25:48 +00:00
John Crispin 9d7d29439b lantiq: BT Home Hub 3A - profile
BT Home Hub 3A - profile

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>

SVN-Revision: 43878
2015-01-08 20:25:41 +00:00
John Crispin 550784f1ea lantiq: BT Home Hub3A - device tree
BT Home Hub3A - device tree

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>

SVN-Revision: 43877
2015-01-08 20:25:35 +00:00
John Crispin 1ba71cbc14 lantiq: Fix adsl led on Home Hub 2B
This fixes the adsl led on the Home Hub 2B.

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>

SVN-Revision: 43876
2015-01-08 20:25:28 +00:00
Felix Fietkau 5bbe758e4e lantiq: add missing NAND_WRITE_DATA in NAND driver.
Signed-off-by: Sylwester Petela <sscapi@gmail.com>

SVN-Revision: 43856
2015-01-05 21:37:21 +00:00
Felix Fietkau c7e8b5ebbd lantiq: remove linux 3.10 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43685
2014-12-13 11:54:57 +00:00
Felix Fietkau 9a495f6bbb kernel: refresh patches
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43564
2014-12-08 12:04:25 +00:00
John Crispin 44d703160b lantiq: Concatenate multiple flash chips for lantiq-flash
Signed-off-by: Maikel Bloemendal <openwrt@maikelenyvonne.nl>
Tested-by: Eddi De Pieri <eddi@depieri.net>

SVN-Revision: 43272
2014-11-14 17:06:04 +00:00
John Crispin 4b5c23e1e3 lantiq: vgv7519 - set some defaults for leds
Signed-off-by: Eddi De Pieri <eddi@depieri.net>

SVN-Revision: 43256
2014-11-14 16:53:53 +00:00
John Crispin 901dddce31 lantiq: set default led configuration from /sys entry later, after per board settings
Signed-off-by: Eddi De Pieri <eddi@depieri.net>

SVN-Revision: 43255
2014-11-14 16:53:48 +00:00
John Crispin c466262d53 vgv7519: fix profile, this board have a rt2800-pci board
SVN-Revision: 43115
2014-10-30 08:08:09 +00:00
John Crispin 36e862da17 lantiq: vgv7519: fix board_config on dts, read mac address and set
Signed-off-by: Eddi De Pieri <eddi@depieri.net>

SVN-Revision: 43109
2014-10-29 20:50:40 +00:00
John Crispin 9762c54914 lantiq_dsl.sh: properly detect vdsl_cpe_control and add missing quotes
lantiq_dsl.sh didn't work with VDSL chipsets for now, fix that by
detecting whether vdsl_cpe_control or dsl_cpe_control should be used.
Also add missing quotes around shell string comparision.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43101
2014-10-29 08:23:47 +00:00
John Crispin 4d7ae64b73 vgv7519: support more recent board release with vrx288 v1.2
The existance of this new board has been confirmed and tested by the guy on this commit

76fdd8e638

SVN-Revision: 43072
2014-10-26 17:18:41 +00:00
Felix Fietkau c288d2d6d9 kernel: makefiles: make use of new var KERNEL_PATCHVER
replace all occurences of LINUX_VERSION with the cleaner
approach. future kernel upgrades must mostly touch only
one file. the only platform left is netlogic, because it
uses a intermediate kernel 3.14.16

Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>

SVN-Revision: 43047
2014-10-24 19:34:02 +00:00
John Crispin ddb9bf4bac lantiq xway: generate ramdisk image by default
The installation process on nand-based boards using ubi
like the BTHOMEHUBV2B makes use of a ramdisk image, so it
makes sense to generate this by default.

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>

SVN-Revision: 42920
2014-10-14 19:01:10 +00:00
John Crispin 0f790247e3 lantiq: allow pcie to be disabled by dts + vgv7519 fix pci irq + disable pcie by dts
Signed-off-by: Eddi De Pieri <eddi@depieri.net>

SVN-Revision: 42907
2014-10-14 11:04:25 +00:00
John Crispin c085d07ee3 lantiq - vgv7519: load rt5362 eeprom from bootloader param patition
SVN-Revision: 42824
2014-10-06 20:08:30 +00:00
John Crispin 6a961da231 lantiq - vgv7519: enable pci bus
SVN-Revision: 42823
2014-10-06 20:08:18 +00:00
John Crispin c2e4007bc1 lantiq - vgv7519: remove spi_cs4, since the board use this line for something else
SVN-Revision: 42822
2014-10-06 20:08:11 +00:00
John Crispin 4cdf861521 lantiq - vgv7519: fix open-drain configuration for stp
SVN-Revision: 42821
2014-10-06 20:08:04 +00:00
John Crispin 1e7962ceaf lantiq - vgv7519: add pci-rst entry into dts
SVN-Revision: 42820
2014-10-06 20:07:56 +00:00
John Crispin ea9aec2fa9 lantiq - vgv7519: remove exin definition copied from dev-board dts
SVN-Revision: 42819
2014-10-06 20:07:45 +00:00
John Crispin 9483a322dd lantiq - vgv7519: we don't have pcie bus so we don't need the reset device tree for this board
SVN-Revision: 42818
2014-10-06 20:07:30 +00:00
John Crispin 48d67fe650 lantiq - vgv7519: we don't have dual minipci-card so we don't need gnt1-req1 for pci handling
SVN-Revision: 42817
2014-10-06 20:07:19 +00:00
John Crispin d0606948cb lantiq - vgv7519: fix gphy led configuration (this set correct alt function to gpio and let peripherials on pci bus to comes up)
SVN-Revision: 42816
2014-10-06 20:07:04 +00:00
John Crispin 7103d61271 lantiq: fix some alt function on pinctrl-xway
SVN-Revision: 42815
2014-10-06 20:06:51 +00:00
John Crispin 36faa5b145 lantiq: led name has changed from adsl -> dsl
make the notify script aware of this.

https://dev.openwrt.org/ticket/18005

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42798
2014-10-06 05:18:52 +00:00
John Crispin d731d14362 lantiq: set 3.14 as default
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42618
2014-09-19 10:52:47 +00:00
John Crispin 944820584a Lantiq: fix build warning from dsl_fs script
fix inclusion of functions.sh in dsl_fs init script

without this, the following error is seen during build:
./etc/init.d/dsl_fs: line 4: /lib/functions.sh: No such file or directory

Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>

SVN-Revision: 42575
2014-09-16 14:53:06 +00:00
John Crispin 3dd93e8336 lantiq: move the lantiq,switch property into the interface node
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42574
2014-09-16 14:53:01 +00:00
John Crispin b520e9b8d4 lantiq: fix switch init on vr9 SoC (3.10)
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42551
2014-09-15 10:19:27 +00:00
John Crispin 32f47538b9 lantiq: fix switch init on vr9 SoC
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42550
2014-09-15 10:19:20 +00:00
John Crispin f16f310306 lantiq: add default switch setup to td8970
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42544
2014-09-15 10:18:37 +00:00
John Crispin 18b5d72d83 lantiq: update 3.14 patches
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42476
2014-09-11 17:49:57 +00:00
John Crispin a4eae94a9c lantiq: add ath9k led pin support
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42437
2014-09-08 14:29:18 +00:00
John Crispin 4d96ccd87a target: set myself as maintainer
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42335
2014-08-30 09:59:18 +00:00
John Crispin e47fbcbf1d lantiq: BTHOMEHUBV2B use bigger mtd partition for kernel
The bb-rc3 image for the BTHOMEHUBV2B is too big for its
mtd partition. This patch corrects the partition sizes in
the device tree. This patch should really go in before
bb-final, otherwise the BTHOMEHUBV2B images won't be useable.
I do apologise for not spotting this straight away.

Many thanks,

Ben

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>

SVN-Revision: 42316
2014-08-28 06:27:41 +00:00
John Crispin 12b73579e4 lantiq: update to 3.14
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42188
2014-08-18 13:09:30 +00:00
John Crispin b796ff6ef3 lantiq: generate unique ARV7519RW22 firmware
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 42183
2014-08-18 13:09:11 +00:00
John Crispin c2668207de lantiq: add support for xrx200 firmware depending on soc type
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 42182
2014-08-18 13:09:08 +00:00
John Crispin db2e450ab5 lantiq: export soc type
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 42181
2014-08-18 13:08:59 +00:00
John Crispin 5f71dbb005 lantiq: improve ARV7519RW22 support
- use full board name
- rename uboot-env partition
- add dsl_fw partition
- remove unneeded pinmux groups
- move gigabit ethernet to LAN
- load mac address from mtd

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 42180
2014-08-18 13:08:56 +00:00
John Crispin c21a20cd78 lantiq: fix dgn3500 and td8970 wifi
ath9k failed to come up due to a bad mac addr

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41860
2014-07-28 15:26:41 +00:00
John Crispin 3836d40a8a lantiq: fix dgn3500 ethernet
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41854
2014-07-28 08:06:40 +00:00
John Crispin ba63338d3f kernel: update to 3.10.49 Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41776
2014-07-20 17:31:11 +00:00
John Crispin 4beb468f11 lantiq: fix board_id/boardname for VGV7519
Signed-off-by: Eddi De Pieri <eddi@depieri.net>

SVN-Revision: 41672
2014-07-16 11:36:02 +00:00
John Crispin 85cacfd753 lantiq: vgv7519 add missing wps label to dts
Signed-off-by: Eddi De Pieri <eddi@depieri.net>

SVN-Revision: 41655
2014-07-14 18:43:02 +00:00
John Crispin c8bde9da4a lantiq: detect board in preinit state
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41638
2014-07-14 07:38:52 +00:00
Gabor Juhos d0ad8c00b6 kernel: sort Kconfig options in kernel configs
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 41614
2014-07-13 16:25:54 +00:00
John Crispin 6134a3de30 target/linux/*: more dead package cleanups
found 2 more

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41574
2014-07-10 20:15:50 +00:00
John Crispin 32e93efc73 target/linux/*: more dead package cleanups
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41571
2014-07-10 20:05:43 +00:00
John Crispin 332b4d556f lantiq: generate /tmp/sysinfo/lantiq_board_name if missing
Run lantiq_board_detect from lantiq_board_name and lantiq_board_model.

This was the one thing missing from r41474 for sysupgrade board
detection to work properly.

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>

SVN-Revision: 41567
2014-07-10 19:16:43 +00:00
John Crispin 03fef9a2d2 lantiq: enable SysupgradeNAND for BTHOMEHUBV2B
Enables SysupgradeNAND for BTHOMEHUBV2B.

Depends on the following patches:
http://patchwork.openwrt.org/patch/5817/
http://patchwork.openwrt.org/patch/5848/
http://patchwork.openwrt.org/patch/5851/

Many thanks everyone for your help the last couple of days.

Ben

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>

SVN-Revision: 41566
2014-07-10 19:16:39 +00:00
John Crispin 4e35eef1d7 lantiq xway: disable gluebi and enable ubiblock
Disables gluebi and enables ubiblock on lantiq xway. Squashfs
images on nand use ubifs instead of jffs2 for the overlay.

I'll leave the equivalent patch for xrx200 to someone who has a
board to test.

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>

SVN-Revision: 41565
2014-07-10 19:16:35 +00:00
John Crispin 1179d4f924 lantiq: UbinizeImage instead of lantiq-specific ubinize.cfg files
New make target in lantiq to use UbinizeImage and SysupgradeNand.
Only enabled for BTHOMEHUBV2B for the moment but should be useable
for other lantiq nand boards.

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>

SVN-Revision: 41474
2014-07-02 16:37:23 +00:00
John Crispin e2915c6981 lantiq: add support for /tmp/sysinfo
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41472
2014-07-02 16:33:11 +00:00
John Crispin 313db9d0ee lantiq: fix missing symbols
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41454
2014-07-02 07:43:32 +00:00
John Crispin 5f31f01853 lantiq: Enable LANTIQ_PHY and LANTIQ_XRX200 only in XRX200 subtarget
Enable LANTIQ_PHY and LANTIQ_XRX200 only in XRX200 subtarget.

These drivers are not needed for ASE, Danube and AR9.
As side effect PHY11G and PHY22F firmwares are not included in the
kernel image, which saves 64 KB.

Signed off by: José Vázquez Fernández <ppvazquezfer@gmail.com>
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41449
2014-07-01 13:18:38 +00:00
John Crispin 994e5ce2f9 kernel: update 3.10.36->3.10.44
205-fix-headers_install.patch is obseleted by upstream commit 3246a0352e3d58380b9386570f1db1faf7edf8a8

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41351
2014-06-26 13:47:42 +00:00
John Crispin d219e055be lantiq: remove deprecated jffs2_nand configuration
As far as I am aware, amongst the lantiq boards, jffs2_nand was
only used on the BTHOMEHUBV2B. Ubi-related modifications to the
device tree for that board mean that the resulting jffs2 images
no longer work, and are no longer required anyway. So I suggest
removing the related configuration, which this patch does.

If anyone else is using jffs2_nand on a lantiq target please speak
up!

Incidentally, for a jffs2 rootfs partition concatenated to the
kernel image to be recognised and mounted correctly on nand
this patch or something equivalent is required:
http://patchwork.openwrt.org/patch/5110/
It is marked as accepted in patchwork but doesn't seem to have
been committed. As far as I am concerned it too is deprecated.

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>

SVN-Revision: 41312
2014-06-24 18:12:52 +00:00
John Crispin aca708e4e6 lantiq: ubinize autoresize flag for rootfs_data
Setting this flag allows rootfs_data to expand on first boot
to fill remaining free space on nand.

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>

SVN-Revision: 41310
2014-06-24 18:12:41 +00:00
John Crispin 432f7e52db lantiq: copy rootfs-overlay.ubi to bin/lantiq
At the moment, an rootfs.ubi is copied over to bin/lantiq
but rootfs-overlay.ubi is not. This adds it.

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>

SVN-Revision: 41270
2014-06-19 14:13:04 +00:00
John Crispin 6c46a10246 lantiq: refresh patches
this adds ben's ath9k fixup

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41269
2014-06-19 14:12:59 +00:00
John Crispin 575127fe1c lantiq: DGN3500 (all known variants) factory and sysupgrade image building support
This patch adds factory image building for the DGN3500, all variants,
and fixes sysupgrade images to make them play nice with the sercomm
secondary boot loader.

The factory images can be used directly in the update dialog in the
interface of the stock firmware and via the special Sercomm bootmode
and a special windows flashing utility (allegedly present in the CD
that came with the device -- but it's also compatible with the NSLU2
Upgrade_207_XP utility.) The special bootmode can be activated by
turning the device on while holding the reset button pressed, then
releasing it when the power led starts blinking red and green. Please
notice that if using the 207 utility, it will always report that the
flashing failed even though it completed successfully. Just power
cycle the router manually after the utility reports the failure and
OpenWRT will boot. This same utility (despite reporting failure in
this case too) can revert a DGN3500 (any variant) to the appropriate
stock Netgear firmware.

This patch is a heavily modified version of a package I found on the
OpenWRT forum with a couple fixes and features added -- mainly the
generation of all the different image variants to support all known
models directly, atm known variants are AnnexA-WW, AnnexA-NA and
AnnexB-DE/GR.

I tested the patch successfully on my device.

Signed-off-by: Marco Antonio Mauro <marcus90@gmail.com>

SVN-Revision: 41236
2014-06-17 15:38:54 +00:00
John Crispin 85ca75decd lantiq BTHOMEHUBV2B - update dts for automatic detection of ubi partition and rootfs type
This patches the BTHOMEHUB2B device tree to make use of the
new code for automatic detection of the ubi partition and the
rootfs type within it. Gets rid of the ugly alternative bootargs
lines.

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>
Acked-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 41214
2014-06-16 18:54:38 +00:00
John Crispin e6c46554bb lantiq: fixup vgv7519 usb support
https://dev.openwrt.org/ticket/16800

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41213
2014-06-16 18:54:33 +00:00
John Crispin e9f664c879 kernel: make sure the new UBIBLOCK symbol does not break builds
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41134
2014-06-11 13:00:17 +00:00
John Crispin ac5d5cbc79 kernel: add a NAND_SUPPORT symbol
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41122
2014-06-11 12:59:22 +00:00
John Crispin 7a03f41940 lantiq: fix eep handling patch
0b79a4a66d17d2c7c12cde8d13637c1b0e5152c2 broke the patch

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41005
2014-06-05 08:19:52 +00:00
John Crispin f09ac641d6 lantiq: ath5k fix in wifi and ethernet eeprom handling patch.
ath5k fix in wifi and ethernet eeprom handling patch.

Without the line that adds the patch of_ath5k_eeprom_probe cause a
kernel panic, at least with the ARV4518PW.
Tested only in the modem-router mentioned above.

This patch is based in Bruno's hack present in patch #5454.

Signed off by: Bruno Rodríguez <bruno.rodriguez.1980@gmail.com>
Signed off by: José Vázquez Fernández <ppvazquezfer@gmail.com>

SVN-Revision: 40999
2014-06-04 07:20:22 +00:00
John Crispin fa48c0db1d lantiq: fix up eth_mac and ath_eep support
this patch got messed up by the last rebase

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40948
2014-06-02 12:45:29 +00:00
John Crispin 7ba5188fe9 lantiq: Fix ARV7510PW22 etop
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 40920
2014-06-02 12:43:43 +00:00
John Crispin d4ec98c2cc lantiq: Fix ARV4518 etop
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 40919
2014-06-02 12:43:35 +00:00
John Crispin f933a741a9 target/linux/*/base-files/lib/upgrade/platform.sh - wrong check for ARGC
ARGC is a 'C-ism', but not known/valid in shell-syntax - insert the correct
var $# (=number of args) here. under normal conditions this had no impact,
but we should at least correct it. the error was observable like this:

root@box:~ [ -e "/etc/functions.sh" ] && . /etc/functions.sh
root@box:~ [ -e "/lib/functions.sh" ] && . /lib/functions.sh
root@box:~ . /lib/upgrade/platform.sh
root@box:~ . /lib/upgrade/common.sh
root@box:~ platform_check_image /tmp/myfirmware.bin
ash: bad number
root@box:~ echo $?
0

Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>

SVN-Revision: 40915
2014-06-02 12:43:22 +00:00
Felix Fietkau 5ab4fe9c0e lantiq: strip FCS from received ethernet frames on XRX200
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 40719
2014-05-07 18:36:58 +00:00
Felix Fietkau 6142d061b5 lantiq: support loading the dsl firmware from a flash partition as a raw gzipped tarfile
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 40715
2014-05-06 21:06:22 +00:00
John Crispin 4f3c740110 lantiq: BT Home Hub 2B - overlayfs on top of ubi
BT Home Hub 2B: use overlayfs on top of ubi.

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>

SVN-Revision: 40553
2014-04-22 08:08:46 +00:00
John Crispin 5836cde0e0 Fix vr9_phy22f_a2x.bin firmware linking
vr9_phy22f_a2x.bin needs to be linked in order to get ethernet support.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 40543
2014-04-22 08:08:06 +00:00
John Crispin cdc53e2ec9 lantiq: fix maximum ethernet header length
The total ethernet frame length should be written to the hardware
register LTQ_ETOP_IGPLEN instead of just the value of the MTU. This
patch fixes network issues on various Danube boards, especially when
VLAN tagging is enabled.

Signed-off-by: Matti Laakso <malaakso at elisanet.fi>

SVN-Revision: 40541
2014-04-22 08:07:53 +00:00
John Crispin c4aae8fbc5 lantiq: ARV7519RW22: several fixes
- Fix ethernet ports.
- Clean DTS files.
- WiFi is lantiq based (not supported yet), remove ath9k.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 40519
2014-04-16 12:01:09 +00:00
John Crispin 9fbbd04f45 lantiq: enable switch on td8970
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40498
2014-04-12 21:22:21 +00:00
John Crispin f2b0a6365e Fix ARV7519RW images
This patch moves ARV7519RW definitions to VR9 section from the AR9 section and removes a whitespace that breaks jffs2 image generation.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 40495
2014-04-12 21:22:08 +00:00
Gabor Juhos d2812cb036 kernel: update 3.10 to 3.10.36
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40467
2014-04-12 11:59:07 +00:00
John Crispin 60edb8f47b lantiq: add an extra partition to the TDW8970 flash that can be used to store the vdsl firmware
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40461
2014-04-11 20:40:34 +00:00
John Crispin 390e856cb2 lantiq: more vdsl related cleanups
* atm module needs to be loaded before linux-atm
* use absolute firmware paths
* extended validation
* add a script for mounting an optional firmware partition

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40460
2014-04-11 20:40:24 +00:00
John Crispin eebc673f1e lantiq: move the dsl-modem config to network.@dsl-modem[-1]
make sure uci_defaults generates a proper uci config for the v/adsl modem

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40439
2014-04-10 08:14:33 +00:00
John Crispin f1963c02f4 lantiq: make dsl_notify.sh executable
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40436
2014-04-09 16:31:14 +00:00
John Crispin 858b972e66 lantiq: there is a V2 of VG3503J that needs a newer fe phy firmware
this should really be auto detected by the kernel, lets used this workaround until the real
solution is ready

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40418
2014-04-07 15:10:22 +00:00
John Crispin c821836395 lantiq: remove unmaintained code
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40392
2014-04-06 09:21:44 +00:00
John Crispin f464b7d176 lantiq: cleanup the dsl control scripts
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40381
2014-04-05 16:34:20 +00:00
John Crispin a05356f48a lantiq: nand fixes
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40372
2014-04-03 14:27:02 +00:00
John Crispin 15139d468c lantiq: BT Home Hub 2B support - userspace
Basic userspace configuration for BT Home Hub 2B

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>

SVN-Revision: 40371
2014-04-03 14:26:58 +00:00
John Crispin 709cab91d2 lantiq: BT Home Hub 2B support - board support
Board support patch for BT Home Hub 2B

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>

SVN-Revision: 40370
2014-04-03 14:26:54 +00:00
John Crispin 469b8297fa lantiq: BT Home Hub 2B support - jedec probe
Lantiq nor patch. Adds support for jedec probing if cfi
probing fails.

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>

SVN-Revision: 40369
2014-04-03 14:26:50 +00:00
John Crispin 78a7ae428f lantiq: make td8970 wifi led work
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40368
2014-04-03 14:26:46 +00:00
John Crispin 58eccdac4f lantiq: fix vr9 ubi handling
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40364
2014-04-03 14:26:24 +00:00
John Crispin e36568e74b lntiq: add support for Astoria ARV7519RW.
These patches add support for the Astoria ARV7519RW aka Livebox 2.1
The PCI and PCIe interfaces have been disabled. Also, because there are
two revisions of this board with different GPHY firmwares, two targets
were defined.
V2: rewrote partitions to work with an u-boot specifically made for
these boards.

Signed off by: Esteban Benito <estebanjbs@gmail.com>
Signed off by: Carles Gadea <carlesgrg@gmail.com>
Tested by: José Vázquez Fernández <ppvazquezfer@gmail.com>

SVN-Revision: 40329
2014-03-30 10:02:30 +00:00
John Crispin 42e8cb6388 lantiq: do an endianness swap to the RT2860 eeprom for ARV752DPW(22)
ARV7510PW22, ARV752DPW and ARV752DPW22 have the RT2860 eeprom stored in
flash as big-endian, but the driver needs it in little-endian format. We
have to swab it before handing it over. This requires my earlier patch
for busybox.

Funnily enough, ARV752DPW works also with the incorrect eeprom, but
undoubtedly unoptimally. I have a hunch that also the final remaining
Lantiq board would require this swabbing, but I'm not sure, so I just
swab it in the three boards that I know about.

v2:
* Swab also on ARV7510PW22 based on feedback from Alvaro Rojas
* Fix the offset with bs=2

Signed-off-by: Matti Laakso <malaakso at elisanet.fi>

SVN-Revision: 40328
2014-03-30 09:16:52 +00:00
John Crispin 5a6268c078 lantiq: add esi
http://patchwork.openwrt.org/patch/3703/

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40326
2014-03-30 09:16:43 +00:00
John Crispin 8b0507c9ca lantiq: fix mtd_split for brnboot firmware images
The existing code only tries to split a parition with name "rootfs"
while actually looking for kernel+rootfs, where usually "firmware" is
used as a partition name. This doesn't make sense, as even if there
was a partition 'rootfs' given by mtdparts or via device-tree, this
code would lead to another partition called 'rootfs' being created
which would not be properly distinguished in the current user-space
code.

While potentially we could use CONFIG_MTD_SPLIT_FIRMWARE_NAME to make
that configurable, the lack of users of brnboot and the fact that we
can freely decide the partition name made me simply change the
hard-coded string constant from "rootfs" to "firmware".

(I'm going to add support for ARV7506PW which run brnboot and needs
this change)

SVN-Revision: 40324
2014-03-30 09:16:35 +00:00
John Crispin 0c73e85cd0 lantiq: fixup ath5k support
http://patchwork.openwrt.org/patch/4417/

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40323
2014-03-30 09:16:31 +00:00
John Crispin 112059073e lantiq: fix initial VLAN conf for P2601HNFX
Signed-off-by: Antonios Vamporakis <ant@area128.com>

SVN-Revision: 40321
2014-03-30 09:16:23 +00:00
John Crispin 5a98a6b9cf lantiq: P2601HNFX dts update for STP and buttons
- Set correct AltSel for STP pins
- Set front button to rfkill

Signed-off-by: Antonios Vamporakis <ant@area128.com>

SVN-Revision: 40320
2014-03-30 09:16:19 +00:00
John Crispin e733242a23 lantiq: add support for Arcadyan ARV7519PW
This patch adds almost full support for this board.

- WiFi is still not working
- USB will not power up. According to some reports, it may be a passive port

Signed-off-by: Antonios Vamporakis <ant@area128.com>

SVN-Revision: 40319
2014-03-30 09:16:15 +00:00
John Crispin 3a43738e21 lantiq: reset gphys on reboot
If gphys are not reset upstream uboot can not use them anymore.

Signed-off-by: Antonios Vamporakis <ant@area128.com>

SVN-Revision: 40318
2014-03-30 09:16:10 +00:00
John Crispin 9531390aad lantiq: add support for ZyXEL P2812HNUFX
This patch adds almost full support for this board. WiFi is still not working.
The FXS ports are not functional due to missing support for the TAPI driver on
VR9 SoC.

Signed-off-by: Antonios Vamporakis <ant@area128.com>
Tested-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 40317
2014-03-30 09:16:06 +00:00
John Crispin 9b78e13aa3 lantiq: add ubifs support in image Makefile
Signed-off-by: Antonios Vamporakis <ant@area128.com>

SVN-Revision: 40316
2014-03-30 09:16:02 +00:00
John Crispin 2803e79be6 lantiq: add ubifs to FEATURES
Signed-off-by: Antonios Vamporakis <ant@area128.com>

SVN-Revision: 40315
2014-03-30 09:15:58 +00:00
John Crispin 07eb49b7e0 lantiq: xrx200: add ubi support in the kernel
Signed-off-by: Antonios Vamporakis <ant@area128.com>

SVN-Revision: 40314
2014-03-30 09:15:54 +00:00
John Crispin 82da5ca248 lantiq: add inital support for xrx200 switch
Signed-off-by: Antonios Vamporakis <ant@area128.com>

SVN-Revision: 40313
2014-03-30 09:15:50 +00:00
John Crispin 32e2246270 lantiq: xrx200: fix duplex
Both the GPL driver from ZyXEL and the xrx200 driver have this error. The flags
are reversed. Full duplex is marked as half and the other way around. With this
fix the switch will push full GBit speeds.

Signed-off-by: Antonios Vamporakis <ant@area128.com>

SVN-Revision: 40312
2014-03-30 09:15:46 +00:00
John Crispin 93e5c8cefc lantiq: fixup 3370 dts file
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40311
2014-03-30 09:15:41 +00:00
John Crispin 561a7ef93b lantiq: fix nand/ebu locking
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40310
2014-03-30 09:15:37 +00:00
John Crispin d6a138141c lantiq: add tffs driver
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40309
2014-03-30 09:15:33 +00:00
John Crispin defdec0f3a lantiq: drop old svip folders
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40294
2014-03-27 13:34:56 +00:00
Gabor Juhos 627baa28d3 kernel: update 3.10 to 3.10.34
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40291
2014-03-27 09:28:33 +00:00
Gabor Juhos f677b1bc7e kernel: update 3.10 to 3.10.32
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39707
2014-02-23 10:59:40 +00:00
Luka Perkov 6e0fd6d518 lantiq: fix typo in pinctl driver
Signed-off-by: Antonios Vamporakis <ant@area128.com>

SVN-Revision: 39588
2014-02-15 22:54:34 +00:00
Luka Perkov eddc327c7c lantiq: fix PCI problems on ARV4510PW
Some ARV4510PW units seem to have unstable PCI due to missing pull-up
resistors. This patch makes sure that the GPIO lines are driven properly.

Signed-off-by: Matti Laakso <malaakso@elisanet.fi>

SVN-Revision: 39587
2014-02-15 22:54:32 +00:00
Gabor Juhos a2543d72d8 kernel: update 3.10 to 3.10.28
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39399
2014-01-26 11:30:34 +00:00
John Crispin 053d596297 lantiq: Add support for Astoria ARV7510PW22
This board is pretty similar to ARV752DPW22.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 39303
2014-01-15 19:16:51 +00:00
Luka Perkov 26dcf1c7c9 lantiq: update kernel configuration
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 39296
2014-01-15 14:11:36 +00:00
John Crispin f58b424c9e lantiq: improve Arcadyan ARV4510PW support
Arcadyan ARV4510PW has already a build profile in OpenWrt, but it is
severely lacking. This patch brings it up-to-date.

Signed-off-by: Matti Laakso <malaakso@elisanet.fi>

SVN-Revision: 39230
2014-01-12 12:07:07 +00:00
Gabor Juhos 0e2586a774 kernel: update 3.10 to 3.10.26
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39220
2014-01-11 16:06:37 +00:00
Hauke Mehrtens 952db22551 kernel: update kernel 3.10 to 3.10.24
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39059
2013-12-15 19:16:30 +00:00
Gabor Juhos f1ef0b92be kernel: update 3.10 to 3.10.21
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38972
2013-12-01 09:59:53 +00:00
John Crispin 776c6c50ce lantiq: move patch to proper folder
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38884
2013-11-20 17:53:36 +00:00
John Crispin d823c20f05 lantiq: update default mii modes
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38881
2013-11-20 16:56:58 +00:00
John Crispin 06ada4b10f lantiq: fix an endless loop in the vmmc platform code
this was caused by not honoured error return codes of of_gpio_count()

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38878
2013-11-20 16:56:32 +00:00
John Crispin 000cefd85e lantiq: DGN3500 fixups
Just fixing up a few things for the Netgear DGN3500.

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>

SVN-Revision: 38733
2013-11-11 13:15:08 +00:00
John Crispin 5139b2d996 lantiq: rename TDW8970 led adsl->dsl
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38730
2013-11-11 12:19:26 +00:00
John Crispin dabdc6911a lantiq: update TDW8970.dts to support buttons properly
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38728
2013-11-11 12:19:18 +00:00
John Crispin 30fafd0617 lantiq: remove old hotplug handler
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38727
2013-11-11 12:19:15 +00:00
John Crispin 7ee1546ca3 lantiq: fix TDW8970 lan/wan mac
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38677
2013-11-07 12:46:24 +00:00
John Crispin f198adc030 lantiq: Fix ar8216 switch configuration for WBMR-HP-G300H devices
The switch is renamed to "switch0" in newer (3.10) linux kernels.
Configure the switch using vlans by default and only configure
the physical switch ports that are present.

Signed-off-by: Richard Mortimer <richm@oldelvet.org.uk>
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38673
2013-11-07 12:46:08 +00:00
John Crispin 1a368e8616 lantiq: fix td-w8970 initramfs generation
https://dev.openwrt.org/ticket/14417

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38667
2013-11-07 12:45:44 +00:00
Gabor Juhos 35656042f1 kernel: update 3.10 to 3.10.18
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38652
2013-11-05 08:25:45 +00:00
Gabor Juhos b6b06000eb kernel: update 3.10 to 3.10.17
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38506
2013-10-23 12:51:05 +00:00
Hauke Mehrtens 81e2f00367 kernel: update kernel to 3.10.15
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38384
2013-10-13 19:28:29 +00:00
John Crispin 654dfb1784 lantiq: fix up diag.sh
init no longer exists as a parameter

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38342
2013-10-08 15:28:33 +00:00
John Crispin 715b62ebad lantiq: experia v8 fixes
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38328
2013-10-07 15:03:00 +00:00
John Crispin 81fb43d2f1 lantiq: fix fritz3370 dts file
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38327
2013-10-07 15:02:56 +00:00
John Crispin ae225124c6 lantiq: fix fritz image generation
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38326
2013-10-07 15:02:52 +00:00
John Crispin 1398a5d849 lantiq: fix eva partition split for squashfs
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38325
2013-10-07 15:02:48 +00:00
John Crispin 4f3797386f lantiq: add support for VGV7519 KPN Experia box v8
Signed-off-by: Maikel Bloemendal <mbloemendal@gmail.com>
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38266
2013-09-30 20:48:46 +00:00
Felix Fietkau bff3637d24 lantiq: add a default for CONFIG_MTD_NAND_XWAY to fix build errors
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38243
2013-09-27 21:12:08 +00:00
Gabor Juhos 9c8a5ef115 kernel: update 3.10 to 3.10.13
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38228
2013-09-27 07:19:21 +00:00
Felix Fietkau a30681dff0 build: unify mips target cflags
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38210
2013-09-26 17:53:14 +00:00
Gabor Juhos 0380904acb kernel/3.10: refresh all target patches
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38182
2013-09-25 17:13:24 +00:00
Gabor Juhos 482b5f34e5 lantiq/3.10: unbreak the mtd-split patch
Compile tested only.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38180
2013-09-25 16:22:04 +00:00
Luka Perkov 7665c57a72 lantiq: fix usb on sx76x
Signed-off-by: Matti Laakso <malaakso@elisanet.fi>

SVN-Revision: 38083
2013-09-20 14:24:30 +00:00
Luka Perkov d2ad87885d lantiq: style fixes
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38051
2013-09-19 00:50:49 +00:00
Luka Perkov 43f1a47430 lantiq: add initial support for Siemens GIGASX76X
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38050
2013-09-19 00:50:48 +00:00
Luka Perkov 3b33adeb99 lantiq: add support for ZyXEL P2601HNFX
SVN-Revision: 38049
2013-09-19 00:50:46 +00:00
Luka Perkov 7d2c5682b9 lantiq: add support for ZTE H201L
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38048
2013-09-19 00:50:44 +00:00
John Crispin 40ac8dd9df lantiq: fix FRITZ7320 flash window size
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38042
2013-09-18 16:31:45 +00:00
John Crispin f9f73ef2ec lantiq: fix ath9k eeprom loading order bug
https://dev.openwrt.org/ticket/14131
http://patchwork.openwrt.org/patch/4038/

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38041
2013-09-18 16:31:41 +00:00
John Crispin 8ff756cdc9 lantiq: fix up default firmware selection for spanish and italian routers
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38039
2013-09-18 16:31:32 +00:00
John Crispin 1878a3d6ab lantiq: add v3.10 patches
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38031
2013-09-17 21:46:10 +00:00
John Crispin cd668944ef lantiq: add wifi eep to a803 dts file
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38030
2013-09-17 21:46:04 +00:00
John Crispin 18b76c66fb lantiq: add a subtarget for the xrx200 SoC family
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38029
2013-09-17 21:46:00 +00:00
John Crispin 0782501483 lantiq: update dts files
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38027
2013-09-17 21:45:50 +00:00
Gabor Juhos a0d6cd4f49 kernel/3.10: add new Kconfig option for firmware partition split
Add a new kernel config option for generic firmware partition
split support and change the uImage split support to depend on
the new option. Aslo rename the MTD_UIMAGE_SPLIT_NAME option to
MTD_SPLIT_FIRMWARE_NAME to make it more generic.

The patch is in preparation for multiple firmware format
support.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38002
2013-09-15 17:03:29 +00:00
John Crispin 94666dad1c lantiq: fix TD-W8970 image generation to work with the new tool
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37727
2013-08-06 16:25:45 +00:00
John Crispin d13cbb04ad lantiq: add support for tplink images to .../image/Makefile
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37722
2013-08-06 12:31:25 +00:00
John Crispin 5001afdc37 lantiq: make the split patch recognize the tplink header
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37721
2013-08-06 12:31:20 +00:00
John Crispin 7f2eaac407 lantiq: fix TDW8970.dts commandline and partition name
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37720
2013-08-06 12:31:16 +00:00
John Crispin e993e0c2cf lantiq: add tplink header id to sysupgrade and fix a comment
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37719
2013-08-06 12:31:10 +00:00
Luka Perkov 27fa640548 lantiq: add (incomplete) support for Aztech GR7000
*) can not connect to switch chip
*) only one usb port is working
*) wifi is not working

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37712
2013-08-06 10:17:16 +00:00
John Crispin 288adb6634 lantiq: several a803 related fixes
based on work from Matti Laasko that he posted in the wiki

Signed-off-by: John Crispin <blogic@openwrt.or

SVN-Revision: 37704
2013-08-05 10:42:00 +00:00
John Crispin b4c722267e lantiq: fix VG3503J ethernet/gphy led support
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37634
2013-08-01 14:30:40 +00:00
John Crispin 336c94c32d lantiq: setup gphy leds on TPlink TDW8970
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37612
2013-07-29 13:10:42 +00:00
John Crispin c3b5ee96b9 lantiq: add gphy pinmux definitions
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37611
2013-07-29 13:10:37 +00:00
John Crispin 61e6be686f lantiq: set sane default for phy leds
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37610
2013-07-29 13:10:32 +00:00
Felix Fietkau 73c4d73d6d build: unify target independent optimization options
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37600
2013-07-29 09:38:29 +00:00
John Crispin bfe65eaf7a lantiq: remove stale phy register setup properties from dts files
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37544
2013-07-25 20:54:51 +00:00
John Crispin 54b4074074 lantiq: add TP-Link TDW8970 image generation
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37543
2013-07-25 20:29:24 +00:00
John Crispin a2c5540727 lantiq: add profile for TP-Link TDW8970
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37542
2013-07-25 20:29:20 +00:00
John Crispin a99042c6a4 lantiq: add devicetree for TP-Link TDW8970
Signed-of-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37541
2013-07-25 20:29:15 +00:00
John Crispin 313636c1e4 lantiq: fix initramfs image generation for lzmaloader based images
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37540
2013-07-25 20:29:10 +00:00
John Crispin a4d31c0353 lantiq: make macs loadable from mtd partitions
This is a really ugly hack but it will have to do until we copy the ramips patches to the lantiq tree

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37539
2013-07-25 20:29:05 +00:00
John Crispin 32f7ae4ce6 lantiq: add a hook to make leds work on the secondary usb bus
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37538
2013-07-25 20:29:01 +00:00
John Crispin 4036be4408 lantiq: update pcie driver
This is an intermediate commit until the new OF driver is functional.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37537
2013-07-25 20:28:56 +00:00
Gabor Juhos 6a5b4ec7dc kernel: update 3.9 to 3.9.11
Also refresh 3.9 patches.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37501
2013-07-22 15:30:56 +00:00
Felix Fietkau fc96e8e4b0 lantiq: update ralink wlan firmware hotplug script for new eeprom size
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37334
2013-07-15 11:06:07 +00:00
John Crispin 955662ec47 lantiq: apply [37258] also to the 3.9 kernel patches
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37317
2013-07-14 18:28:02 +00:00
John Crispin 93c4359512 lantiq: revert 36778 as it breaks irq assignment to pci devices
Reported-by: Matti Laakso
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37258
2013-07-11 21:16:34 +00:00
Luka Perkov 9de461f202 lantiq: etop enable gbit port0
Signed-off-by: Antonios Vamporakis <vamporakis@yahoo.com>
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37191
2013-07-08 07:11:59 +00:00
Luka Perkov 1a3ad5a037 lantiq: add device tree support for arv4519pw
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37178
2013-07-05 07:44:42 +00:00
Luka Perkov 14b6674b39 lantiq: fix initramfs
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37143
2013-07-03 09:17:15 +00:00
John Crispin fdfbac75c2 lantiq: xrx200_net compile fix
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37126
2013-07-02 09:34:45 +00:00
Jonas Gorski 0d9f760f27 kernel: update linux 3.9 to 3.9.8
Includes memory allocation fixes as well as several networking fixes.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 37103
2013-06-30 13:10:12 +00:00
John Crispin 124ef95f5f lantiq: add v3.9 support
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37089
2013-06-29 18:16:56 +00:00
John Crispin bfc7007226 lantiq: Add support for loading athxk eeproms through mtd
This patch enables retrieving the wifi calibration data from an MTD partition.
Try to copy mac address from ethernet before generating a random one.
This fixes DGN3500 ath9k support.

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 37087
2013-06-29 16:33:46 +00:00
John Crispin fe8ecbd972 lantiq: fix kernel config for DEU support
Trying to load the DEU modules results in unresolved symbols. This
provides them. This requires the previous patch to be applied first.

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>

SVN-Revision: 37086
2013-06-29 16:33:37 +00:00
John Crispin b4f36358ff lantiq: make xrx200 network driver use a tasklet for rx housekeeping
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37085
2013-06-29 16:33:28 +00:00
John Crispin aff84655f5 lantiq: remove 3.7 kernel patches
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37084
2013-06-29 16:33:18 +00:00
John Crispin 44b1688e6c lantiq: Tune the XWAY subtarget cflags
This patch sets the cflags -mtune=34kc -mdsp only in XWAY subtarget, while the others remain with mtune=mips32r2.
Although the Danube has a Mips 24KEc core performs well with the above cflags.

Signed-off-by: José Vázquez Fernández <ppvazquezfer@gmail.com>

SVN-Revision: 37006
2013-06-21 16:54:15 +00:00
John Crispin 5d441ae7ea lantiq: set mips16 support.
Set mips16 support in XWAY subtarget.

This patch is based in changeset #36600

Signed-off-by: José Vázquez Fernández <ppvazquezfer@gmail.com>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37005
2013-06-21 16:54:07 +00:00
John Crispin 81c57ec131 lantiq: Fix ARV7518 DTS definitions
Fix EBU leds by removing req2 and gnt2 from pinmux.
Fix rfkill button gpio.
Enable reset button.
Fix power led activation status.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 37004
2013-06-21 16:54:03 +00:00
John Crispin 76c79f50d7 lantiq: Fixes to athxk EEPROM loading
Use platform data array for storing ath5k EEPROM instead of creating another one.
EEPROM size is 2048 words (2 bytes), so we must read 4096 bytes from flash.
No need to keep the checksum fix now that the EEPROM is loaded completely.
Add a manual eeprom swap for ath9k and keep the endian way.
Use mac-offset property retrieved from the DTS.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 36901
2013-06-10 08:25:12 +00:00
John Crispin 7638caf35d lantiq: make kernel_oldconfig
Seems the existing kernel config for 3.8 was cp'ed from 3.7; this patch
is the result of "make kernel_oldconfig" with defaults for new options.

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>

SVN-Revision: 36900
2013-06-10 08:25:07 +00:00
John Crispin f7daed8b9a lantiq: diag.sh with both red and green power LEDs
This provides a boot LED sequence suitable for devices with both red and
green LEDs for power. This assumes no "default-on" settings in the
device tree.

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>

SVN-Revision: 36899
2013-06-10 08:25:02 +00:00
Luka Perkov da7590cd21 lantiq: fix formating in .dts files
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 36882
2013-06-08 11:36:07 +00:00
Jonas Gorski 1beaf031d1 target: don't build jffs2 nor images by default
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 36863
2013-06-05 20:58:59 +00:00
John Crispin e9ef65175d lantiq: revert [36779] as it caused a regression
submitter was informed of a endinaess swap regression and replied with "works on my board"

revert the patch and make arv7518 wifi work again

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36807
2013-05-31 13:25:07 +00:00
John Crispin e60cb01c45 lantiq: ARV752DPW: fix reboot loop caused by wrong GPIO setting
The GPIO buttons of ARV752DPW are active low.

Treating them as active high caused a reboot loop as a reset-button
press is detected by gpio-button-hotplug/gpio-keys-polled on startup.

This fixes: https://dev.openwrt.org/ticket/12642

Signed-off-by: Rafael Gieschke <rafael@gieschke.de>

SVN-Revision: 36783
2013-05-30 16:01:06 +00:00
John Crispin c2b1e9eeef lantiq: Fix ar8216 switch configuration
On linux 3.8 the switch is named as "switch0", but the network configuration script names it as "eth0", causing no communication over ethernet due to no proper VLAN config.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 36782
2013-05-30 16:00:59 +00:00
John Crispin 090a75447b lantiq: DGN3500 support
This requires all the preceding patches and finishes support for the
DGN3500, also removing an obsolete file.

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>

SVN-Revision: 36781
2013-05-30 16:00:50 +00:00
John Crispin d1f3751d05 lantiq: wifi calibration from MTD
This patch enables retrieving the wifi calibration data from an MTD
partition. It requires the previous patch.

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>

SVN-Revision: 36779
2013-05-30 16:00:32 +00:00
John Crispin 83c3cd4ed9 lantiq: postpone PCI and wifi init
This postpones the initialization of PCI and wifi until after the MTD
initialization, so that calibration data may be loaded from there.

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>

SVN-Revision: 36778
2013-05-30 16:00:24 +00:00
John Crispin b585923cc9 lantiq: fix LED-handling oversights
This reassigns the PPPoE status to the LED that was intended to indicate
it, rather than the DSL sync light.

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>

SVN-Revision: 36777
2013-05-30 16:00:15 +00:00
Gabor Juhos 46225b99d9 kernel: update linux 3.8 to 3.8.13
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36724
2013-05-26 16:02:31 +00:00
Jonas Gorski 526aedb705 kernel: move CONFIG_MIPS_SEAD3 to generic
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 36617
2013-05-12 21:41:55 +00:00
Gabor Juhos e57c7d6c12 kernel: update linux 3.8 to 3.8.12
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36576
2013-05-08 08:53:53 +00:00
John Crispin eb10f052ce lantiq: enable portmaps again and set max port to 2
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36573
2013-05-07 10:58:52 +00:00
Gabor Juhos 8a9fe26f20 kernel: update linux 3.8 to 3.8.11
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36507
2013-05-01 22:15:18 +00:00
Gabor Juhos f718179af5 kernel: update linux 3.8 to 3.8.10
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36493
2013-04-30 10:43:59 +00:00
Gabor Juhos 36d4fd70bc kernel: update linux 3.8 to 3.8.9
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36453
2013-04-26 16:55:42 +00:00
John Crispin b42a173664 lantiq: make leds and network work on VG3503J
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36445
2013-04-25 19:03:41 +00:00
John Crispin 520bf46375 lantiq: fix board detection helpers
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36444
2013-04-25 19:03:37 +00:00
John Crispin 157c86371f lantiq: move dts files to thir own folder
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36443
2013-04-25 19:03:32 +00:00
John Crispin 9ae3adbe3c lantiq: disable sw portmaps on xrx200 ethernet as segment solation does not work yet
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36441
2013-04-25 19:03:25 +00:00
John Crispin d3d18ae812 lantiq: make lzma-loader based images for VG3503J
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36440
2013-04-25 19:03:21 +00:00
John Crispin a46acc80e4 lantiq: update VG3503J.dts to match new partition layout
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36439
2013-04-25 19:03:17 +00:00
John Crispin 46306c2e47 lantiq: add lzma-loader source
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36438
2013-04-25 19:03:13 +00:00
Gabor Juhos 151cadfe32 kernel: update linux 3.8 to 3.8.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36363
2013-04-19 08:07:34 +00:00
Gabor Juhos 604395650a kernel: update linux 3.8 to 3.8.7
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36332
2013-04-14 09:25:53 +00:00
John Crispin d5f87e193c add VG3503J support
this adds basic support. the bootloader on these units is locked down.

until we have a replacement we can do basic testing with these env variables in uboot.

set update_openwrt erase 0xb0020000 0xb073ffff \;tftp 0x81000000 openwrt-lantiq-xway-VG3503J-squashfs.image\;cp.b 0x81000000 0xb0020000 \$(filesize)
set bootcmd cp.b 0xb0020000 0x80002000 0x400000\; go 0x80002000

unfortunatley the bootloader ignores the bootcmd, so autobooting is not possible yet. you need to call "run bootcmd" by hand after each power cycle.

please note that the vdsl firmware is non redistributable. you can find it in the GPL drop that BT provides.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36315
2013-04-11 19:18:07 +00:00
John Crispin fbc1e3732b add FE phy firmware
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36314
2013-04-11 19:17:48 +00:00
John Crispin 0d32469457 add missing pinmux patch
Fix lantiq pinmux which affected PCI and USB.

Known affected boards are: ARV4518 and ARV7518.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 36312
2013-04-11 07:12:37 +00:00
Steven Barth ea94d66b0f Adapt default network configuration for IPv6
SVN-Revision: 36278
2013-04-09 08:03:08 +00:00
Gabor Juhos f78c902cfd kernel: update linux 3.8 to 3.8.6
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36215
2013-04-06 11:40:44 +00:00
John Crispin d9bb7ff7a5 Migrate lantiq platform to common led helper functions
http://patchwork.openwrt.org/patch/3316/

Signed-off-by: Michael Heimpold <mhei@heimpold.de>

SVN-Revision: 36187
2013-04-03 10:01:07 +00:00
John Crispin a4c745ee74 add a missing patch that makes board detection work again
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36186
2013-04-03 10:01:03 +00:00
Gabor Juhos 07532dca7f kernel: update linux 3.8 to 3.8.3
Also refresh the related generic/platform patches.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36039
2013-03-15 14:39:51 +00:00
John Crispin 4d5860cdd6 ACMP252: fix USB-enable GPIO and use default PCI configuration for now
EEPROM is an actial serial EEPROM on the WiFi module, therefore we can remove
ralink_eep from the dts.
USB power-enable GPIO turned out to be GPIO #3 (found via probing/brute-force).
PCI works with default settings as long as the vendor bootloader is used.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 36030
2013-03-14 18:43:54 +00:00
John Crispin 0dbe4f502d fix buttons on vr9 eval kit
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36029
2013-03-14 18:43:49 +00:00
John Crispin 9b4a8c6d1e select vdsl packages on vr9 boards
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36028
2013-03-14 18:43:44 +00:00
John Crispin 0f7f1f3347 fix fritzbox 3370 partitions/memory/cmdline
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36027
2013-03-14 18:43:39 +00:00
John Crispin 5452dbad61 build jffs images for nand based fritzbox
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36026
2013-03-14 18:43:34 +00:00
John Crispin b98ae2b149 bump to v3.8
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36014
2013-03-14 18:42:29 +00:00
John Crispin 3ab75692f3 move GPHY FW blobs to non versioned folder
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36013
2013-03-14 18:42:21 +00:00
John Crispin 48a4b3a0cd fixes NO_XIP on CFI0001 flash
This patch disables the execute-in-place (XIP) support for flash on
lantiq. This has to be disabled since the bus which flash is connected
to does not support unaligned accesses. Resolves data bus errors on
Lantiq routers with Intel command set flash.

Signed-off-by: Matti Laakso <malaakso@elisanet.fi>

SVN-Revision: 35992
2013-03-12 13:53:08 +00:00
John Crispin e3a6ea65e1 add support for AudioCodes AC-252
user-space support for extracting the EEPROM for the RaLink WiFi is still
missing. Besides this, it's all working.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 35990
2013-03-12 13:52:54 +00:00
John Crispin 0b881eea72 unbreak dgn3500 spi-gpio
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 35989
2013-03-12 13:52:47 +00:00
Gabor Juhos 23b3b3a194 kernel: update linux 3.7 to 3.7.10
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35860
2013-03-03 13:57:40 +00:00
Gabor Juhos 3f749d1e8e kernel: update linux 3.7 to 3.7.9
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35644
2013-02-17 21:32:42 +00:00
Gabor Juhos 162b8e23a5 kernel: update linux 3.7 to 3.7.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35604
2013-02-15 07:36:15 +00:00
Gabor Juhos bae4bfe3f8 kernel: update linux 3.7 to 3.7.7
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35571
2013-02-12 09:51:11 +00:00
Gabor Juhos 08ff976720 kernel: update linux 3.7 to 3.7.6
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35476
2013-02-04 10:02:56 +00:00
Gabor Juhos 562ba537fc kernel: update linux 3.7 to 3.7.5
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35390
2013-01-29 18:29:45 +00:00
John Crispin a0f7a3c214 dont load gptu on ase
fixes #12792

SVN-Revision: 35357
2013-01-28 17:46:07 +00:00
John Crispin 0de0955931 refresh patches
SVN-Revision: 35355
2013-01-28 17:44:20 +00:00
John Crispin 0183df8ed9 Fix ARV7518 USB
This patch correctly fixes USB on Lantiq ARV7518.
There was a failed attempt on fixing this on r35077 (https://dev.openwrt.org/changeset/35077/).

Signed-off-by: José Vázquez Fernández <ppvazquezfer@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 35354
2013-01-28 17:43:35 +00:00
John Crispin 3534757bb9 Add ath9k eeprom and pci fixup support
Add ath9k eeprom and pci fixup support (again) for linux 3.7.

On linux 3.3, the fixup forced the regdomain to 0x67, causing low TX power.
This patch only corrects checksum, the rest of the EEPROM isn't changed.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 35353
2013-01-28 17:43:25 +00:00
John Crispin 5eb43d4cf8 Add support for ARV4518PW R01 and rename R01A.
There are two different versions of SMC7908A-ISP: R01 and R01A.
R01 has an internal clock for PCI, meanwhile R01A has an external clock.

This fixes: https://dev.openwrt.org/ticket/12884

Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 35352
2013-01-28 17:42:59 +00:00
Felix Fietkau ed7ca5d44e kernel: clean up crypto related kconfig options
SVN-Revision: 35327
2013-01-27 17:23:12 +00:00
Gabor Juhos 15be1c9ee7 kernel: update linux 3.7 to 3.7.4
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35318
2013-01-24 17:08:37 +00:00
Jo-Philipp Wich 3a2cccda2e all targets: use numerically prefixed uci-defaults file names to better control order of execution
SVN-Revision: 35217
2013-01-18 12:42:53 +00:00
Gabor Juhos 0de21d9747 kernel: update linux 3.7 to 3.7.3
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35216
2013-01-18 11:44:42 +00:00
Gabor Juhos c19c30cefd kernel: update linux 3.7 to 3.7.2
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35100
2013-01-12 11:43:08 +00:00
John Crispin 64910f4490 fixes USB reset on ARV7518
SVN-Revision: 35077
2013-01-10 06:44:58 +00:00
John Crispin 4834d09a3f fixes none-pci build
SVN-Revision: 35062
2013-01-09 09:04:09 +00:00
John Crispin 624eb36fff adds missing symbol
SVN-Revision: 34939
2012-12-30 21:31:10 +00:00
John Crispin ce57efa3ea fixes usb port on arv 4518
SVN-Revision: 34935
2012-12-30 12:38:40 +00:00
Felix Fietkau 41a039f464 mips: use -mno-branch-likely for kernel and userspace, saves ~11k kernel size after lzma and ~12k squashfs size in the default configuration
SVN-Revision: 34909
2012-12-28 19:17:19 +00:00
John Crispin efe3225e2b ar9 did not load atm driver properly
SVN-Revision: 34840
2012-12-22 10:16:52 +00:00
John Crispin 379cd6e25e dont use input layer for gpio buttons
SVN-Revision: 34839
2012-12-21 20:04:20 +00:00
John Crispin 90a3761b0b default switch setup for WBMR
SVN-Revision: 34838
2012-12-21 20:04:12 +00:00
John Crispin ae0b9ff1ce Setting the MDC clock to 2.5MHz and changing the mii mode to rgmii seems to fix the communication issues with the ar8316 switch. (ticket #11143)
Tested only on the wbmr-hp-g300h, could affect/break other devices.

Signed-off-by: Sebastian Mayr <sebastian.mayr@student.uibk.ac.at>

SVN-Revision: 34837
2012-12-21 20:04:04 +00:00
John Crispin 9818a1f00b adds script to set wps info on boards with a wps button
SVN-Revision: 34836
2012-12-21 20:03:59 +00:00
John Crispin 3134205dfd minor tweaks to WBMR image
SVN-Revision: 34835
2012-12-21 20:03:54 +00:00
John Crispin f4b2439554 add missing PHY_BASIC_FEATURES to 100mbit phys
SVN-Revision: 34826
2012-12-21 14:41:35 +00:00
John Crispin 861bf6af49 fix typo inside fritz3370 devicetree file
SVN-Revision: 34825
2012-12-21 14:41:30 +00:00
John Crispin 54c096527a more devicetree fixes
SVN-Revision: 34824
2012-12-21 13:47:55 +00:00
John Crispin 59cc6d9ddd improve button handling
SVN-Revision: 34823
2012-12-21 13:47:50 +00:00
John Crispin 7ce4c81647 add phy-reset gpio handling to xrx200-net
SVN-Revision: 34822
2012-12-21 13:47:44 +00:00
John Crispin 42d668174e add more lantiq phy ids based on daniels uboot code
SVN-Revision: 34821
2012-12-21 13:47:40 +00:00
John Crispin 16c5946f8b refresh patch and install v1.1 gphy blobs
SVN-Revision: 34820
2012-12-21 13:47:35 +00:00
John Crispin 1b0aaff246 adds a fix for ar8216 mii detection on etop driver
SVN-Revision: 34795
2012-12-19 16:20:24 +00:00
Mirko Vogt e34a4e0c7b Do not use deprecated path to functions.sh (/etc/functions.sh -> /lib/functions.sh)
SVN-Revision: 34793
2012-12-19 16:07:50 +00:00
John Crispin 687920ba3e minor basefiles fixes
SVN-Revision: 34790
2012-12-19 15:17:42 +00:00
John Crispin e472671bde fix gptu clocks
SVN-Revision: 34789
2012-12-19 15:17:31 +00:00
John Crispin 5495ffbfdf more board file fixes
SVN-Revision: 34788
2012-12-19 15:17:11 +00:00
John Crispin 4aa8272c8b fix gptu patch - tapi should now load
SVN-Revision: 34777
2012-12-18 20:12:57 +00:00
John Crispin af48676b28 update to 3.7.1
SVN-Revision: 34771
2012-12-18 19:32:01 +00:00
John Crispin 7bcb6b5479 make pinctrl-falcon honour status="disbaled";
SVN-Revision: 34714
2012-12-16 10:03:28 +00:00
John Crispin 573cf13419 fix falcon profile
SVN-Revision: 34713
2012-12-16 10:03:23 +00:00
John Crispin 33d3433d75 fix i2c-lantiq module
SVN-Revision: 34712
2012-12-16 10:03:18 +00:00
John Crispin b637eb598d add falcon devicetree files
SVN-Revision: 34711
2012-12-16 10:03:11 +00:00
John Crispin 3ca51b5399 select hcd as a default package for the dgn3500
SVN-Revision: 34702
2012-12-15 11:01:16 +00:00
John Crispin 85e4da7e23 EASY80920 has 2 usb ports
SVN-Revision: 34701
2012-12-15 11:01:11 +00:00
John Crispin 3dac521a49 remove 3.3 and 3.6
SVN-Revision: 34699
2012-12-15 02:01:08 +00:00
John Crispin 1dece11487 cleanup basefiles
SVN-Revision: 34698
2012-12-15 02:01:00 +00:00
John Crispin 601bc28669 clean up modules.mk
SVN-Revision: 34697
2012-12-15 02:00:55 +00:00
John Crispin 2c33df0376 add devicetrees
SVN-Revision: 34691
2012-12-15 02:00:20 +00:00
John Crispin 3a948770cf add linux-v3.7
SVN-Revision: 34687
2012-12-15 01:59:45 +00:00
Gabor Juhos 2b378d11c8 kernel: update linux 3.6 to 3.6.10
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34639
2012-12-11 20:14:39 +00:00
Gabor Juhos 2581173660 kernel: update linux 3.6 to 3.6.9
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34578
2012-12-08 15:01:33 +00:00
Gabor Juhos c2f018fca2 remove common symbols from 3.6 configs
The removed symbols are present in the generic configuration.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34404
2012-11-29 15:21:41 +00:00
Gabor Juhos 1f516235ea remove common symbols from 3.3 configs
The removed symbols are present in the generic configuration.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34403
2012-11-29 15:21:35 +00:00
Gabor Juhos 3a4d0ebd5c kernel: update linux 3.6 to 3.6.8
Also refresh the affected patches.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34402
2012-11-29 07:42:19 +00:00
John Crispin f7ead0a2d5 adds proper package selection for dgn3500
SVN-Revision: 34286
2012-11-21 06:06:48 +00:00
Gabor Juhos ff1e854511 kernel: update linux 3.6 to 3.6.7
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34227
2012-11-18 08:41:31 +00:00
John Crispin 3b419e506c fixes ar9 / dgn3500 support
SVN-Revision: 34180
2012-11-13 08:54:14 +00:00
John Crispin 71ddec8091 add more profiles
SVN-Revision: 34131
2012-11-09 19:26:58 +00:00
John Crispin 88e4d93802 a few more dts files (WIP)
SVN-Revision: 34130
2012-11-09 19:26:43 +00:00
John Crispin a30b3066ce add mtd split and atm patch
SVN-Revision: 34129
2012-11-09 19:26:30 +00:00
John Crispin 7404e59bbd add OWRTDTB marker patch
SVN-Revision: 34100
2012-11-06 10:39:43 +00:00
John Crispin 3a1851964e add support for arv7525
SVN-Revision: 34097
2012-11-06 07:38:24 +00:00
Gabor Juhos e8669729bc kernel: update linux 3.6 to 3.6.6
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34086
2012-11-05 13:22:09 +00:00
John Crispin 05fbb370dc 3.6 is not the default yet
SVN-Revision: 34065
2012-11-03 13:29:44 +00:00
John Crispin a9ad36b7f1 adds dts files and make devicetree images buildable
SVN-Revision: 34064
2012-11-02 20:07:47 +00:00
John Crispin c8ae6dac56 update ase target for 3.6
SVN-Revision: 34063
2012-11-02 20:07:41 +00:00
John Crispin dc8641f7fa add subtarget, as of 3.6 we dont seperate xway SoC
SVN-Revision: 34062
2012-11-02 20:07:36 +00:00
John Crispin dd619da4fc adds 3.6 files, patches and config
SVN-Revision: 34061
2012-11-02 20:07:26 +00:00
John Crispin 736835343c move files/ -> files-3.3/
SVN-Revision: 34060
2012-11-02 20:07:02 +00:00
John Crispin fa316620a7 prepare Makefile for 3.6
SVN-Revision: 34059
2012-11-02 20:06:51 +00:00
Gabor Juhos e91dc2e5b3 target: refresh all target configs with kconfig.pl
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33987
2012-10-29 10:11:05 +00:00
John Crispin 6993e19532 drop GPIODEV platform code
SVN-Revision: 33825
2012-10-17 21:53:37 +00:00
John Crispin 9dc218f88f tapi was not registeredproperly for most arcadyan boards
SVN-Revision: 33591
2012-09-28 20:57:06 +00:00
Gabor Juhos 43147ffec5 generic: move GENERIC_PWM symbol into the generic config
SVN-Revision: 33383
2012-09-13 06:38:31 +00:00
Luka Perkov 4c76b3635b lantiq: fix sx76x default uci network configuration
SVN-Revision: 33324
2012-09-06 00:09:46 +00:00
John Crispin 64b385dda7 pci gpio mapping
This patch fixes the GPIO ALTSEL settings for some of the GPIOs used by the PCI subsystem in Lantiq Danube. These changes are required for more than one PCI device to work. Tested with an ARV7510PW having two PCI-devices; a VIA USB controller and a Ralink WLAN mini-PCI card.

Signed-off-by: Matti Laakso <malaakso@elisanet.fi>

SVN-Revision: 33054
2012-08-08 12:14:43 +00:00
John Crispin 5f438c3565 W502V/ARV4525 wireless mac bugfix
The ARV4525 board init is passing the wrong offset to
arv_register_ath5k() resulting in a bogus mac.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 32993
2012-08-04 20:14:52 +00:00
John Crispin 060b161ca6 cleanup patches
SVN-Revision: 32953
2012-08-03 08:53:02 +00:00
John Crispin c2d3274ffc fixes i2c clock enable
SVN-Revision: 32949
2012-08-02 13:29:49 +00:00
John Crispin f5f36911f0 add lantiq svip support
SVN-Revision: 32925
2012-07-31 18:49:54 +00:00
John Crispin 5178c177dc rebase config-3.3
SVN-Revision: 32797
2012-07-24 17:28:25 +00:00
John Crispin 48869ef7c0 move CONFIG_ETHERNET_PACKET_MANGLE to a generic config file
This broke falcon builds

SVN-Revision: 32794
2012-07-24 15:33:01 +00:00
John Crispin 95e69ac4f1 clean up generic image building
SVN-Revision: 32065
2012-06-05 17:49:42 +00:00
John Crispin a4d96aae8d bump to 3.3.8
SVN-Revision: 32055
2012-06-05 06:57:51 +00:00
Luka Perkov 7f00e5ffc6 uboot-envtools: update to 2012.04.01
SVN-Revision: 32051
2012-06-04 21:55:49 +00:00
John Crispin 2b4ef2eafa adds unset Kbuild symbol
SVN-Revision: 32026
2012-06-02 14:03:32 +00:00
John Crispin 47ef62d1b8 adds patch to make Tantos (psb6970) switch buildable again
SVN-Revision: 32006
2012-05-30 17:41:28 +00:00
Gabor Juhos ff74305623 lantiq: use the generic uci-default functions for initial LED setup
SVN-Revision: 31995
2012-05-29 16:39:21 +00:00
John Crispin f567980d38 move files-3.3 -> files
SVN-Revision: 31912
2012-05-27 16:13:02 +00:00
John Crispin 8002770520 3.2 R.I.P.
SVN-Revision: 31911
2012-05-27 16:12:59 +00:00
John Crispin 81ddc886e1 dgn3500 support with eeprom loading from sysfs
WIFI eeprom:
As discussed, it is impossible for nand and spi flash platforms to have the eeprom data available from mtd. I suggested to load the eeprom from user-space. I've looked into regular firmware loading but this is only possible when using modules.  I've created a sysfs entry that allows reading and writing the eeprom data to the platform data. After loading the eeprom data I rely on pci-hotplug support to disable the bogus pci device and rescan the bus (with fixups and all). Because hotplug is not available, an init script is created that performs the copy from mtd to platform data. I think it is best to eventually move the sysfs functions to dev_wifi_athxk.c file, this would get rid of the external to the ath9k platform data.

SPI flash:
It seems that the spi-xway driver is not really working. It causes my kernel to crash in all sorts of ways. I added to bitbang SPI to be able to the calibration data mention above.
I've kept the original mtd partitioning that Netgear uses.

Buttons/LED:
Both buttons are working properly. Two leds are not enabled: The red internet led is connected to the pci_gnt1 pin... I can't disable it because then DMA stops working.
The green wifi led is connected to an unknown atheros gpio.

Signed-off-by: Pieter Voorthuijsen <p.voorthuijsen at gmail.com>

SVN-Revision: 31910
2012-05-27 16:02:22 +00:00
John Crispin 6e8fe84472 fixes zyxel p2601hnfx
moves the linux partition, removes the config partition and the
buttons settings have small adjustments.

Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 31909
2012-05-27 16:02:20 +00:00
John Crispin 3f2f50c681 Add basic configuration for new board ZTE H201L. Still missing are button and led gpio values.
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 31908
2012-05-27 16:02:16 +00:00
Gabor Juhos 2ae5581447 kernel: update linux 3.3 to 3.3.7
SVN-Revision: 31848
2012-05-23 21:05:32 +00:00
Felix Fietkau 9037c2ccc6 lantiq: allow platforms with rt2x00 to override the mac address without overriding eeprom, fixes bogus wlan mac address on arv4520
SVN-Revision: 31835
2012-05-20 21:58:03 +00:00
Gabor Juhos 39994008cb linux: move certain disabled symbols to the generic configs
* CONFIG_ARCH_DMA_ADDR_T_64BIT
  * CONFIG_ARCH_HAS_ILOG2_U32
  * CONFIG_ARCH_HAS_ILOG2_U64
  * CONFIG_ARCH_PHYS_ADDR_T_64BIT
  * CONFIG_ARCH_SUPPORTS_MSI
  * CONFIG_GENERIC_CPU_DEVICES
  * CONFIG_HWMON_DEBUG_CHIP
  * CONFIG_I2C_PXA_PCI
  * CONFIG_LEDS_GPIO
  * CONFIG_MINIX_FS_NATIVE_ENDIAN
  * CONFIG_MLX4_CORE
  * CONFIG_POWER_SUPPLY
  * CONFIG_POWER_SUPPLY_DEBUG
  * CONFIG_QUOTACTL
  * CONFIG_SDIO_UART
  * CONFIG_SENSORS_K10TEMP
  * CONFIG_SENSORS_SCH56XX_COMMON
  * CONFIG_SENSORS_VIA_CPUTEMP
  * CONFIG_SERIO_AMBAKMI
  * CONFIG_SERIO_I8042
  * CONFIG_SERIO_LIBPS2
  * CONFIG_SERIO_PCIPS2
  * CONFIG_SERIO_RAW
  * CONFIG_SERIO_SERPORT
  * CONFIG_SPI_BITBANG
  * CONFIG_SPI_GPIO

SVN-Revision: 31737
2012-05-15 10:58:52 +00:00
John Crispin 364f47e454 code style cleanup of the mach files
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 31735
2012-05-15 09:38:05 +00:00
John Crispin 07dca108a9 adds zyxel p2601hnfx support
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 31734
2012-05-15 09:38:02 +00:00
John Crispin 9785ec070e set 3.3.6 as default
SVN-Revision: 31733
2012-05-15 09:37:59 +00:00
John Crispin c61ada1db8 set 3.3.5 as default
SVN-Revision: 31718
2012-05-14 16:11:26 +00:00
Gabor Juhos b472e5d12e kernel: update linux 3.3 to 3.3.6
SVN-Revision: 31709
2012-05-14 09:18:32 +00:00
John Crispin dc4cfd3a64 Add 3.3 config files
SVN-Revision: 31672
2012-05-09 12:52:24 +00:00
John Crispin 75827c538d Add missing 3.3 patches
SVN-Revision: 31671
2012-05-09 12:52:21 +00:00
John Crispin 7d638fbb2f Drop 2.6.32 support
SVN-Revision: 31670
2012-05-09 12:52:19 +00:00
Gabor Juhos 34018a630f kernel: update linux 3.3 to 3.3.5
SVN-Revision: 31645
2012-05-07 20:11:43 +00:00
Felix Fietkau 0ff3c396d3 kernel: rewrite the phy packet hook, put it in the network stack to avoid having to keep non-upstream ethernet driver changes
SVN-Revision: 31637
2012-05-06 21:19:14 +00:00
Gabor Juhos cbfce53831 kernel: update linux 3.3 to 3.3.4
SVN-Revision: 31541
2012-04-30 08:38:11 +00:00
Jonas Gorski 22b4e6b882 kernel: update linux 3.2 to 3.2.16
SVN-Revision: 31459
2012-04-24 09:25:35 +00:00
John Crispin d4f3677cba Adding wifi eeprom extract for ARV752DPW - Easybox 802
Signed-off-by: Christian Rustmeier <rustmeier a.t. gmail dotty com>

SVN-Revision: 31443
2012-04-23 09:40:37 +00:00
Mirko Vogt 87cdc0dd5b change /etc/config/network according to actual VLAN config to enable LAN port 4 on the ARV4520PW board
The VLAN mapping on the ARV4520PW board is the following:

port on Router: | VLAN in software:
LAN 1           | 3
LAN 2           | 2
LAN 3           | 1
LAN 4           | 0
DSL             | 4

So LAN4 is not VLAN4 but VLAN0 (VLAN4 is DSL port) -> set "3 2 1 0 5t" as default switch config.

SVN-Revision: 31391
2012-04-21 08:07:21 +00:00
Jonas Gorski a8f2bc682e kernel: also update the targets to use 3.2.15
Thanks Gabor for spotting it.

SVN-Revision: 31337
2012-04-17 13:12:14 +00:00
Jonas Gorski 3a9b6dc313 kernel: update linux 3.3 to 3.3.2
SVN-Revision: 31336
2012-04-17 12:51:02 +00:00
Jonas Gorski ee4c47a134 kernel: update linux 3.2 to 3.2.15
SVN-Revision: 31335
2012-04-17 12:50:54 +00:00
John Crispin 83948d6385 adds 3.3 patches and files
SVN-Revision: 31307
2012-04-16 12:31:48 +00:00
John Crispin e3889bcf7c update 3.2 patches
sync with lantiq kernel series

SVN-Revision: 31260
2012-04-12 12:33:56 +00:00
Jonas Gorski 16b4cbcdd6 kernel: update linux 3.2 to 3.2.14
SVN-Revision: 31222
2012-04-09 14:48:51 +00:00
John Crispin da3f3f8f9d add Easybox 802 - ARV752DPW
Implements the ARV752DPW architecture in mach-arv.c

Signed-off-by: Christian Rustmeier <rustmeier@gmail.com>

SVN-Revision: 31206
2012-04-05 20:03:21 +00:00
John Crispin 94af65db49 enable usb on dgn3500
A power-enable toggle gpio is not available, it is always on and protected with a resettable fuse.

Signed-off-by: Pieter Voorthuijsen<p.voorthuijsen at gmail.com>

SVN-Revision: 31205
2012-04-05 20:03:19 +00:00
Jonas Gorski d87efd8c3c kernel: update linux 3.2 to 3.2.13 and refresh patches
Also remove a duplicate patch from lantiq (already in generic).

SVN-Revision: 31158
2012-04-01 07:56:55 +00:00
Felix Fietkau 5f799a0e97 ath9k: make endian check optional
Turns out it triggers on some AR71xx devices where no swapping should be done.
Enable endian check for the lantiq target.

SVN-Revision: 31084
2012-03-27 13:21:53 +00:00
John Crispin b982e8166b cleanup atheros wifi handling
Signed-off-by: Andrej Vlašić <andrej.vlasic0@gmail.com>
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 31064
2012-03-25 08:50:38 +00:00
John Crispin 5ea100c39b cleanup image makefile
SVN-Revision: 31063
2012-03-25 08:50:32 +00:00
John Crispin f27c030141 update /etc/uci-defaults/*
SVN-Revision: 31062
2012-03-25 08:50:30 +00:00
John Crispin ba4a7fca7b update profiles
SVN-Revision: 31061
2012-03-25 08:50:27 +00:00
John Crispin 0f6a9d5c7c bump kernel to 3.2.12
SVN-Revision: 31060
2012-03-25 08:50:09 +00:00
Felix Fietkau db6e326c56 targets: replace madwifi in profiles with ath5k, madwifi is unmaintained
SVN-Revision: 31015
2012-03-19 09:58:13 +00:00
Jonas Gorski fab5be9b4f lantiq: load dwc_otg early
Needed for using external rootfs on usb sticks.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>

SVN-Revision: 30940
2012-03-14 10:59:52 +00:00
John Crispin e5798d7c9b fixes etop locking issue
SVN-Revision: 30689
2012-02-23 07:42:00 +00:00
John Crispin 1a71f07d00 generate uboot environment data in target
With this patch it is possible to generate uboot environment config file
inside lantiq target. Currently it is only supporting GIGASX76X board.

uboot environment config is used by fw_printenv fw_setenv tools.

Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 30537
2012-02-14 19:07:11 +00:00
John Crispin 7416a5f0aa fix compile error in previous commit
SVN-Revision: 30534
2012-02-14 19:07:05 +00:00
John Crispin cd1a204365 Support booting the Speedport W502V using BRN-BOOT.
While the disadvantage is less available flash space, it's easy and
safe to flash without opening the device.
Going back to the original firmware is also possible.

This patch add two firmware utilities, mkbrncmdline and mkbrnboot.

mkbrncmdline patches the uncompressed kernel so the registeres a0 to
a3 are initialized and the memory size is passed in.

mkbrnboot takes the lzma compressed kernel and squashfs images and
creates a firmware image that can be flashed using the BRN-BOOT
recovery kernel, which is booted by holding both buttons when
powering up the device and will listen on http://192.168.2.1.

The firmware file from bin/lantiq/ to use is
openwrt-lantiq-danube-ARV4525PW-BRNDTW502-brnImage

The BRN-BOOT recovery kernel does size-check the image, so if it's
too big to fit into flash it will complain accordingly.

A second patch is needed to make the wired network interface work
since there is no u-boot to pre-initialise it.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 30532
2012-02-14 17:48:04 +00:00
John Crispin 0b07769898 fixes irq locking in ethernet driver
SVN-Revision: 30522
2012-02-14 15:05:58 +00:00
John Crispin 55bf39e98c fixes gpio_export patch
SVN-Revision: 30521
2012-02-14 15:05:57 +00:00
John Crispin 976d3eb854 add annex selection support to ltq_dsl package
SVN-Revision: 30518
2012-02-14 15:05:49 +00:00
Jonas Gorski 1015fab0d7 kernel: update linux 3.1 to 3.1.10
SVN-Revision: 29966
2012-01-31 09:43:57 +00:00
John Crispin 49eb3fd845 gigaset 76x
* fixes leds
* adds all leds found on the sx763 board
* removes board_config from flash layout because wireless data is stored in kernel (ath5k)
* fix button handling

Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 29763
2012-01-17 12:10:35 +00:00
Jonas Gorski c560444a58 kernel: update linux 3.1 to 3.1.9
SVN-Revision: 29726
2012-01-13 14:38:28 +00:00
Jonas Gorski e33bb9ec66 linux: update 3.1 to 3.1.4
SVN-Revision: 29470
2011-12-06 19:50:30 +00:00
John Crispin bf7316424c lantiq: bump to 3.1.3
SVN-Revision: 29348
2011-11-28 10:22:58 +00:00
John Crispin 9389593db9 lantiq: drop 009-MIPS-make-oprofile-use-cp0_perfcount_irq-if-it-is-se.patch
This patch is/was a duplicate of generic/patches-3.1/307-mips_oprofile_fix.patch

SVN-Revision: 29294
2011-11-23 12:22:15 +00:00
John Crispin 4982ca983c lantiq: * fixes ath5k eeprom handling * fixes sx76x * adds sx76x to userland api * minor style cleanups
Signed-of-by: Andrej Vlašić <andrej.vlasic0@gmail.com>

SVN-Revision: 29292
2011-11-22 18:50:51 +00:00
John Crispin bbe96f13a6 lantiq: add runtime generation of /etc/config/network
SVN-Revision: 29161
2011-11-15 18:21:00 +00:00
John Crispin 79a4642b40 lantiq: fix falcon build breakage
dev-wifi-rt2x00 fails to build on falcon due to missing pci

SVN-Revision: 29129
2011-11-14 18:55:58 +00:00
Jonas Gorski d8acb75009 linux: update 3.1 to 3.1.1
SVN-Revision: 29007
2011-11-13 10:48:05 +00:00
John Crispin a8797d0de6 lantiq: add uci-defaults code for handling leds
SVN-Revision: 29004
2011-11-12 23:40:21 +00:00
John Crispin 832e02cd77 lantiq: add /lib/lantiq.sh and make hotplug handlers use it
SVN-Revision: 29003
2011-11-12 23:40:16 +00:00
John Crispin 5dcbbf0160 lantiq: rename leds
SVN-Revision: 29002
2011-11-12 23:40:12 +00:00
John Crispin d84b7596d9 lantiq: split compat headers out of bsp header patch
SVN-Revision: 29001
2011-11-12 23:40:07 +00:00
John Crispin 2cff80f015 lantiq: adds hotplug handler for loading rt2x00 firmware
SVN-Revision: 29000
2011-11-12 23:40:01 +00:00