7071a06e8f
gmp: upgrade to version 5.1.1
...
SVN-Revision: 35823
2013-02-28 00:52:30 +00:00
a0e2d2a6d1
sed: upgrade to version 4.2.2
...
SVN-Revision: 35822
2013-02-28 00:52:28 +00:00
ba80e0a4da
ccache: upgrade to version 3.1.9
...
SVN-Revision: 35821
2013-02-27 23:08:02 +00:00
557c047f71
firewall3: clear contnrack table on flush, set policies to drop during rule reload
...
SVN-Revision: 35820
2013-02-27 14:09:37 +00:00
43d6e5c585
mac80211: fix sending probe requests in client mode, fixes connecting to hidden networks ( #13056 )
...
SVN-Revision: 35819
2013-02-26 21:52:59 +00:00
dbe806ec61
mklibs: upgrade to 0.1.35
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 35818
2013-02-26 21:49:11 +00:00
781e7dd18b
toolchain/binutils: fix partial MD5 sum from r35813
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 35816
2013-02-26 16:52:36 +00:00
5a0f4a89eb
toolchain/musl: add support for 0.9.9
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 35815
2013-02-26 16:40:27 +00:00
10c38f50a0
toolchain/binutils: add musl libc config.sub patch to 2.23.1
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 35814
2013-02-26 16:40:20 +00:00
f08ef57424
toolchain/binutils: fix 2.19.1 MD5 sum
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 35813
2013-02-26 16:40:17 +00:00
d417049c4a
toolchain/binutils: refresh patches
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 35812
2013-02-26 16:40:12 +00:00
bfcbabdf15
ncurses: fix build with musl libc toolchains
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 35811
2013-02-26 16:40:07 +00:00
f880c4992d
toolchain: mark unavailable packages for musl libc
...
And make librt be an empty stub for musl libc.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 35810
2013-02-26 16:40:02 +00:00
a2abc43104
gdb: do not depend on libthread-db when using musl libc
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 35809
2013-02-26 16:39:59 +00:00
2935823a42
toolchain/gcc: refresh patches
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 35808
2013-02-26 16:39:54 +00:00
098bd91f5e
gcc: don't build documentation
...
This closes #13039 .
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 35807
2013-02-26 16:16:33 +00:00
325cb65009
rt2x00: prevent device probe errors with CONFIG_MAC80211_MESH disabled ( #13080 )
...
SVN-Revision: 35806
2013-02-26 15:14:32 +00:00
a85019072f
gcc: remove support for 4.6.2
...
There are no good reasons for keeping this version around when 4.6.3 and
4.6-linaro are there.
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 35805
2013-02-26 14:31:24 +00:00
a90b6f7d90
6relayd: Fix config behaviour for rewrite_dns_addr option
...
SVN-Revision: 35804
2013-02-26 12:50:52 +00:00
32ac53821f
6relayd: compatibility with broken IPv6 devices * Announce ULA as deprecated if other addresses are available * Allow the announced DNS-server to be overwritten
...
SVN-Revision: 35803
2013-02-26 12:42:53 +00:00
5412b6f32e
ramips: add support for 3.8
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35801
2013-02-25 21:28:42 +00:00
a08646642e
ramips: image: don't break make process if mkimage command fails
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35800
2013-02-25 21:28:40 +00:00
275db5b4c4
ramips: remove port_power_off field from ehci_platform_data
...
It is removed in 3.8. Also add a revert patch for 3.7.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35799
2013-02-25 21:28:38 +00:00
5e1d6ce077
ramips: remove __dev_{init,exit} annotations
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35798
2013-02-25 21:28:34 +00:00
2c34e1aba5
brcm47xx: use bcm47xx_board_get() and detect some more boards in flash partition driver
...
SVN-Revision: 35791
2013-02-25 20:56:37 +00:00
5d3b728372
brcm47xx: board detection WNDR3400v2
...
WNDR3400v2 is based on BCM53xx . Image that is created breaks the router somehow therefore "#".
CFE and NVRAM contain different vars - example:
CFE line original: Device eth0: hwaddr 74-44-01-37-C6-69, ipaddr 192.168.1.1, mask 255.255.255.0
CFE after openwrt: Device eth0: hwaddr 00-FF-FF-FF-FF-FF, ipaddr 192.168.1.1, mask 255.255.255.0
Logs were posted earlier on this mailing list: https://lists.openwrt.org/pipermail/openwrt-devel/2012-July/016174.html
Different logs with factory firmware are in the wiki: http://wiki.openwrt.org/toh/netgear/wndr3400#wndr3400v2
(and on wikidevi for example)
Signed off by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 35790
2013-02-25 20:55:46 +00:00
f7879cd8d8
ar71xx: add profile and build image fot the TL-WA830RE v1 board
...
Added support for the TP-LINK TL-WA830RE v1 Range Extender.
Based on the WA901ND v1 support. Hardware IDs checked against
original firmware. Patch was successfully tested on hardware.
Signed-off-by: Ronald Hecht <ronald.hecht@gmx.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35789
2013-02-25 20:37:35 +00:00
ea71239d8a
ar71xx: add model detection for the TL-WA830RE board
...
Signed-off-by: Ronald Hecht <ronald.hecht@gmx.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35788
2013-02-25 20:37:33 +00:00
ddb29bebf5
firmware-utils/mktplinkfw: add support for the TL-WA830RE v1/v2 boards
...
Signed-off-by: Ronald Hecht <ronald.hecht@gmx.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35787
2013-02-25 20:37:32 +00:00
f1bde82f00
ath9k: issue a cold reset after failures or after bringing the chip out of full sleep - fixes many kinds of DMA issues
...
SVN-Revision: 35785
2013-02-25 19:53:31 +00:00
0f2fc0adfd
brcm47xx: use same board detection code as kernel 3.8
...
SVN-Revision: 35770
2013-02-24 18:10:42 +00:00
05de472518
adm5120: add support for 3.8
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35769
2013-02-24 18:08:14 +00:00
3d65d0291c
adm5120: remove __dev{init,exit} annotations
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35768
2013-02-24 18:08:03 +00:00
26e9830eac
broadcom-wl: hack to work around a bug in the PCIe controller
...
Thank you nlh
This closes #12930 .
SVN-Revision: 35767
2013-02-24 18:01:06 +00:00
58eea9dc28
broadcom-diag: add support for e3200 v1
...
Hex values in nvram seem to be uppercase on my e3200 device.
Define one power led and two buttons (reset/wps).
Signed-off-by: Tijs Van Buggenhout <tvb@able.be>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 35766
2013-02-24 17:57:28 +00:00
c3563fbea6
broadcom-diag: Detection of WNDR3400v1
...
nvram variable "boardtype" is unique for now.
-button gpio were taken from nvram.
-led information was taken from dd-wrt
( http://svn.dd-wrt.com/browser/src/router/libutils/utils.c )
I hope that I changed the values correctly.
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 35765
2013-02-24 17:56:00 +00:00
49ff283df8
broadcom-diag: use new in kernel board detection code
...
SVN-Revision: 35764
2013-02-24 17:55:09 +00:00
2754907a13
mac80211: brcmsmac: add ap mode support
...
This does not work very well. I did not got this running in 5GHz mode and it was not very fast.
SVN-Revision: 35763
2013-02-24 01:11:20 +00:00
414a2631b6
mac80211: disable ipv4/ipv6 address notifiers ( fixes #13055 )
...
SVN-Revision: 35762
2013-02-24 01:00:39 +00:00
7bd713a76d
mac80211: fix monitor mode channel reporting
...
SVN-Revision: 35761
2013-02-23 18:02:49 +00:00
6dbdadcaa6
mac80211: fix monitor-only injection
...
SVN-Revision: 35760
2013-02-23 17:41:58 +00:00
dbb21f1641
mac80211: fix wireless extension support
...
SVN-Revision: 35759
2013-02-23 12:48:14 +00:00
53771fb8ee
mac80211: update linux-firmware to latest revision
...
Fixes mwl8k AP mode for 88e8366.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 35758
2013-02-23 12:13:18 +00:00
6fbfeca6ef
mac80211: select relayfs if ath9k debugfs is enabled
...
SVN-Revision: 35757
2013-02-23 12:12:39 +00:00
c730da325a
package/kernel: i2c: don't skip built-in modules
...
Don't skip build-in modules when generating i2c kmod packages, to allow
empty packages to be generated for satisfying dependencies.
Closes #12259 .
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 35755
2013-02-23 11:30:30 +00:00
3b1fa12cb9
mac80211: disable building the wil6210 driver
...
SVN-Revision: 35754
2013-02-23 01:40:24 +00:00
e526c7bc17
mac80211: update to wireless-testing 2013-02-22
...
SVN-Revision: 35753
2013-02-23 01:12:36 +00:00
c4c43eed04
ath9k: fix rssi issues
...
SVN-Revision: 35750
2013-02-22 20:11:55 +00:00
d642c4465f
ath9k_htc: fix signal strength reporting issues
...
SVN-Revision: 35749
2013-02-22 16:10:15 +00:00
0ab5ab2c08
adm5120: remove a superfluous patch
...
The NO_IRQ symbol is not used by the amba core since
upstream commit:
dfb85185bda373a70409c70c2632b02fb0f8f449
AMBA: get rid of last two uses of NO_IRQ
This gets rid of the last two users of NO_IRQ in AMBA primecell
drivers.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35748
2013-02-22 16:01:19 +00:00
Luka Perkov
Jo-Philipp Wich
Felix Fietkau
Florian Fainelli
Steven Barth
Gabor Juhos
Hauke Mehrtens
Jonas Gorski