openwrt

Commit Graph

Author	SHA1	Message	Date
Gabor Juhos	2f53f82203	ar71xx: use the TL-MR3x20 code for the TL-WR841N/ND v7 These models are based on the AP99 reference board, and uses the AR7241 SoC. SVN-Revision: 29658	2012-01-04 17:30:57 +00:00
Gabor Juhos	301b1b4f92	ar71xx: show correct model name on TL-WA701N/ND boards SVN-Revision: 29657	2012-01-04 17:30:55 +00:00
Gabor Juhos	ac68f0d8fa	ar71xx: add profile and build image for the TL-WA701N/ND boards SVN-Revision: 29656	2012-01-04 17:30:54 +00:00
Gabor Juhos	72019009c7	ar71xx: fix network configuration for the TL-WA901N/ND boards SVN-Revision: 29654	2012-01-04 17:30:52 +00:00
Gabor Juhos	90bfef9ec9	ar71xx: allow to use LAN LED on the TL-WA901N/ND boards SVN-Revision: 29653	2012-01-04 17:30:50 +00:00
Gabor Juhos	5eb502d9c1	ar71xx: add default LED configuration for the TL-MR3020 Also use the system LED for diagnostic. SVN-Revision: 29652	2012-01-04 17:30:49 +00:00
Gabor Juhos	1045c83527	ar71xx: add support for TP-Link TL-MR3020 This patch adds support for the TP-Link device TL-MR3020 which is very similiar to the TL-WR703N. The TL-MR3020 uses 5 LEDs, 1 push button and a switch with 3 positions. Only four LEDs can be controlled via GPIO. The power LED is connected to the power supply. The WPS push button has been mapped to KEY_WPS_BUTTON. The two GPIO signals of the sliding switch have been mapped to BTN_0 and BTN_1. I have also setup a wiki page with details here: http://wiki.openwrt.org/toh/tp-link/tl-mr3020 USB is working and has been tested with USB mass storage and USB UMTS stick. Wifi also seems to work. Ethernet is working too. Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de> SVN-Revision: 29651	2012-01-04 17:30:47 +00:00
Gabor Juhos	88223f87d1	ar71xx: use the new om-watchdog package for OM2P Signed-off-by: Antonio Quartulli <ordex@autistici.org> SVN-Revision: 29648	2012-01-04 17:30:41 +00:00
Jo-Philipp Wich	a788f199c9	remove current RTSP support SVN-Revision: 29643	2012-01-04 00:29:29 +00:00
Jo-Philipp Wich	237282ae8c	backport upstream commit e1738bd9cecc5c867b0e2996470c1ff20f66ba79 to affected kernels (#9802 ) commit 8efa88540635 (sch_sfq: avoid giving spurious NET_XMIT_CN signals) forgot to call qdisc_tree_decrease_qlen() to signal upper levels that a packet (from another flow) was dropped, leading to various problems. SVN-Revision: 29642	2012-01-03 23:08:15 +00:00
Gabor Juhos	8854c90119	ar71xx: add profile and build factory image for the Hornet-UB board SVN-Revision: 29637	2012-01-01 19:30:29 +00:00
Gabor Juhos	1d3de89f3c	ar71xx: build images for the ALFA Network N2/N5 boards SVN-Revision: 29636	2012-01-01 19:30:28 +00:00
Gabor Juhos	1e68f10b87	ar71xx: add support for the ALFA Network N2/N5 boards SVN-Revision: 29635	2012-01-01 19:30:25 +00:00
Gabor Juhos	5c067db8a7	ar71xx: define LAN/WAN LEDs for the TL-WR741N/ND boards SVN-Revision: 29631	2011-12-31 15:02:46 +00:00
Gabor Juhos	fff02e6ea8	ar71xx: enable SWCONFIG_LEDS SVN-Revision: 29630	2011-12-31 15:02:40 +00:00
Gabor Juhos	5fa65cba6e	kernel: swconfig: introduce a generic switch LED trigger SVN-Revision: 29627	2011-12-31 15:02:30 +00:00
Gabor Juhos	8c2482f76e	ar71xx: ag71xx: implement get_port_{link,stats} callbacks SVN-Revision: 29626	2011-12-31 15:02:26 +00:00
Gabor Juhos	975355a2b1	kernel: swconfig: add get_port_{link,stats} callbacks SVN-Revision: 29625	2011-12-31 15:02:24 +00:00
Gabor Juhos	557009bbdb	ar71xx: fix LEDs on the WRT400N SVN-Revision: 29624	2011-12-31 13:54:11 +00:00
Gabor Juhos	244c322d25	ramips: rt288x: add support for the Belkin F5D8235-4 v1 board Patch-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> SVN-Revision: 29617	2011-12-28 08:43:43 +00:00
Gabor Juhos	f50b02b559	ramips: rt288x: change base address and window size of flash bank 0 SVN-Revision: 29616	2011-12-28 08:43:36 +00:00
Gabor Juhos	98437278c4	ramips: rt305x: add support for the ALFA Networks W502U (R36) board SVN-Revision: 29615	2011-12-28 08:43:32 +00:00
Gabor Juhos	76dacee995	ar71xx: enable sysupgrade support for airrouter Works for me! ;-) Patch-by: Russell Senior <russell@personaltelco.net> SVN-Revision: 29614	2011-12-27 16:59:43 +00:00
Gabor Juhos	c6ee919b2a	ar71xx: fix sysupgrade on PB42/PB44 boards SVN-Revision: 29613	2011-12-27 16:57:01 +00:00
Gabor Juhos	723d8dd74f	ramips: rt288x: add support for the Buffalo WLI-TX4-AG300N board SVN-Revision: 29612	2011-12-27 16:56:30 +00:00
Jo-Philipp Wich	9fa33ceee2	add missing config symbol SVN-Revision: 29610	2011-12-25 13:33:18 +00:00
Hauke Mehrtens	11125d68ed	brcm47xx: fix usb on more recent bcma based devices. SVN-Revision: 29605	2011-12-23 17:21:52 +00:00
Gabor Juhos	7b1e525b56	ramips: initial support for Sitecom WL-351 v1 002 This add support for the Sitecom WL-351 v1 002. In principle the Engenius ESR9850 should also work with this, but I don't have the hardware to test it. Since an external gigabit switch (RTL8366RB) is used, I had to modify the ramips_esw driver to add a 'bypass' mode, which just configures it to not filter the vlan tags. Also two initialization words (FCT2 and FPA2) are set to different values by u-boot than what the driver is using and it only seems to work correctly when they not overridden by the driver, so I added them to the platform specific data as reg_initval_fct2 and reg_initval_fpa2. With this wired lan works as expected, however I'm still having some trouble with the wireless lan: It only works after I rmmod & re-insmod rt2800pci and then reconfigure it in the webinterface, but not directly after rebooting. The symptom of this is wpad saying: Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: associated (aid 1) Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> WPA: pairwise key handshake completed (RSN) Dec 20 15:45:22 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: authenticated But wpa_supplicant on the client saying: Authentication with <wl351mac> timed out. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 29604	2011-12-23 14:27:16 +00:00
Gabor Juhos	2cb946f5b4	ramips: add support for the Senao/EnGenius ESR-9753 board Signed-off-by: Artur Wronowski <arteqw@gmail.com> SVN-Revision: 29603	2011-12-23 14:27:10 +00:00
Gabor Juhos	03bce34384	ramips: define firmware partition for Omnima MiniEMBWiFi Patch-by: Ivan Ignjatic <ivan@omnima.co.uk> SVN-Revision: 29602	2011-12-23 14:27:05 +00:00
Felix Fietkau	db0a1db257	ar71xx: set a reserved bit that resets to 1 when writing the address table control register on the ar7240 switch (should fix #10547 ) SVN-Revision: 29598	2011-12-22 05:43:53 +00:00
Jonas Gorski	8799627ef0	ar71xx: add default network config for buffalo WZR-HP-G300NH2 and WZR-HP-G450H Thanks netprince for reporting and testing. SVN-Revision: 29595	2011-12-21 19:32:40 +00:00
Jo-Philipp Wich	ebefe1eb3a	the mach file of the WZR-HP-G300NH2 accidentally claimed the mach id of the WZR-HP-AG300H, correct the id (#10649 ) SVN-Revision: 29593	2011-12-21 01:27:48 +00:00
Hauke Mehrtens	0cd03df3b1	brcm47xx: remove patch starting adding brcm4716 to ssb brcm4716 is supported by bcma now we do not need this patch SVN-Revision: 29576	2011-12-19 23:55:20 +00:00
Hauke Mehrtens	5b8686c303	brcm47xx: add new usb driver for bcma bus and replace ssb usb driver. This new usb driver uses an extra device so the ehci and the ohci driver are not depending on ech other any more. SVN-Revision: 29575	2011-12-19 23:39:13 +00:00
Hauke Mehrtens	1aa5a61754	kernel: update bcma and ssb to version master-2011-12-16 from wireless-testing SVN-Revision: 29574	2011-12-19 23:33:03 +00:00
Hauke Mehrtens	91d0ef6f19	brcm47xx: remove support for kernel 2.6.39 There are problems with the patches for kernel 2.6.39 and I do not want to support two different sets of patches. SVN-Revision: 29573	2011-12-19 23:26:15 +00:00
Felix Fietkau	11013ad947	ar71xx: add missing wireless led changes for wzr-hp-g300nh2 SVN-Revision: 29568	2011-12-19 09:04:15 +00:00
Felix Fietkau	0cc056cb7e	ar71xx: add support for the wzr-hp-g300nh2 Signed-off-by: Mark Deneen <mdeneen@gmail.com> SVN-Revision: 29567	2011-12-18 22:20:17 +00:00
Gabor Juhos	5a0a2b2f1b	ar71xx: use 64kraw template on more TP-Link boards SVN-Revision: 29561	2011-12-17 18:49:55 +00:00
Gabor Juhos	67c7980290	ar71xx: connect GMAC0 to the internal switch on DB120 Because the external switch has no driver yet, connect GMAC0 to the PHY4 of the internal switch for now. This allows to use the DB120 board as a router with 4LAN+1WAN ports. SVN-Revision: 29557	2011-12-15 22:25:38 +00:00
Gabor Juhos	5bbd416e38	ar71xx: add defines for the AR934X GMAC interface SVN-Revision: 29556	2011-12-15 22:25:36 +00:00
Gabor Juhos	e47a8c2bb2	ar71xx: fix GMAC1 interface speed on the DB120 board SVN-Revision: 29555	2011-12-15 22:25:35 +00:00
Gabor Juhos	36bc2c2c80	ar71xx: ag71xx: fix switch port setup for AR934X SVN-Revision: 29554	2011-12-15 22:25:32 +00:00
Gabor Juhos	00667c3846	ar71xx: ag71xx: allow to connect PHY4 to the CPU on AR934X SVN-Revision: 29553	2011-12-15 22:25:30 +00:00
Gabor Juhos	0540970345	ar71xx: ag71xx: setup switch interface mode on AR934X SVN-Revision: 29552	2011-12-15 22:25:29 +00:00
Gabor Juhos	44014110b8	ar71xx: ag71xx: detect the built-in switch of the AR934X SoCs SVN-Revision: 29551	2011-12-15 22:25:28 +00:00
Gabor Juhos	e2a546d475	ar71xx: allow to attach the internal switch for AR934x SVN-Revision: 29550	2011-12-15 22:25:22 +00:00
Gabor Juhos	9ae65588d8	ar71xx: introduce ar71xx_switch_data SVN-Revision: 29549	2011-12-15 22:25:11 +00:00
Gabor Juhos	bfe747b7d9	ar71xx: build images for TL-WR741N/ND v2 SVN-Revision: 29548	2011-12-15 22:03:48 +00:00
Gabor Juhos	aefff26624	ar71x: use raw squashfs images for TP-Link boards SVN-Revision: 29547	2011-12-15 22:03:46 +00:00
Gabor Juhos	d5bd28ffae	ar71xx: create a template for using unpadded squashfs images SVN-Revision: 29546	2011-12-15 22:03:45 +00:00
Gabor Juhos	dbc4fa4b5b	ar71xx: put squash image right after the kernel on TP-Link boards SVN-Revision: 29545	2011-12-15 22:03:44 +00:00
Gabor Juhos	850be54b72	ar71xx: tplinkpart: allow to detect JFFS2 as well SVN-Revision: 29543	2011-12-15 22:03:40 +00:00
Gabor Juhos	b7d7481b07	ar71xx: ag71xx: check PHY IDs before accessing the switch registers SVN-Revision: 29541	2011-12-15 13:25:23 +00:00
Gabor Juhos	0655552860	ar71xx: ag71xx: don't use port 4 of the switch, it is not connected on ar724x SVN-Revision: 29540	2011-12-15 13:25:21 +00:00
Gabor Juhos	204fc6bed5	ar71xx: ag71xx: nuke ar7240sw_init SVN-Revision: 29539	2011-12-15 13:25:20 +00:00
Gabor Juhos	d1f7783612	ar71xx: fix mac addresses on jjPlus devices SVN-Revision: 29538	2011-12-15 13:25:18 +00:00
Gabor Juhos	d3058b8f8c	ar71xx: build image for the Hornet-UB board SVN-Revision: 29536	2011-12-14 20:54:11 +00:00
Gabor Juhos	b9c5cb5c9a	ar71xx: add support for ALFA Network's Hornet-UB board SVN-Revision: 29535	2011-12-14 20:54:10 +00:00
Gabor Juhos	66c8cc0f6d	ar71xx: add GPIO function bit defines for AR933X SVN-Revision: 29534	2011-12-14 20:54:07 +00:00
Gabor Juhos	0c38d36488	ramips: add support for Omnima MiniEMBWiFi board This patch adds support for the Omnima MiniEMBWiFi Ralink RT3050F based board. Based on a patch by Ivan Ignjatic <ivan at omnima.co.uk> SVN-Revision: 29533	2011-12-14 20:51:26 +00:00
Felix Fietkau	7076d74b21	ar71xx: fix gpio count for ar7241/ar7242 SVN-Revision: 29532	2011-12-14 20:47:24 +00:00
Felix Fietkau	b878f4a927	ar71xx: register extra leds behind the wireless mac on wzr-hp-g450h SVN-Revision: 29531	2011-12-14 20:21:42 +00:00
Felix Fietkau	e3017bc05e	ath9k: add support for registering extra leds connected to the wmac gpio lines SVN-Revision: 29530	2011-12-14 20:21:36 +00:00
Gabor Juhos	d2717d3d47	ar71xx: get rid of squashfs-4k images SVN-Revision: 29522	2011-12-13 20:41:24 +00:00
Gabor Juhos	5afedc67e2	generic: disable 'small sector' erase in m25p80 driver This fixes the issues with the jffs2 images on various boards. Using JFFS2 on devices with 4KiB erase sectors is not safe: http://lists.infradead.org/pipermail/linux-mtd/2011-June/036591.html SVN-Revision: 29521	2011-12-13 20:41:22 +00:00
Felix Fietkau	4a441570ca	kernel: move linux/ath9k_platform.h to generic files so that it can be reused from other targets SVN-Revision: 29516	2011-12-13 15:14:59 +00:00
Felix Fietkau	3806671fe5	ar71xx: fix wireless led on wzr-hp-g450h SVN-Revision: 29515	2011-12-13 15:00:43 +00:00
Gabor Juhos	2dd7dfb1c9	ar71xx: enable AR9341 support at setup.c Patch-by: dyq <729650915@qq.com> SVN-Revision: 29514	2011-12-13 14:59:43 +00:00
Gabor Juhos	058998acdb	ar71xx: Build images for Netgear WNDRMAC and WNDRMACv2 The WNDRMAC is a WNDR3700v2 (64MB RAM, 16MB flash) in a white case. The WNDRMACv2 is a WNDR3800 (128MB RAM, 16MB flash) in a WNDRMAC case. The WNDRMAC case doesn't have "holes" or labels for the 2.4GHz LED or switch ports 2-4. The stock firmware uses a single LED (in the 5GHz position) to indicate the status of both radios, and a single LED (in the switch port 1 position) to indicate the status of all LAN ports. The "missing" LEDs are present on the board, and easily shine through the case. Unlike the stock firmware, OpenWrt will use these "hidden" LEDs. I've tested the WNDRMACv2 image. I don't have a v1 WNDRMAC, but assume that this is sufficient to build a fully-functional image. Signed-off-by: Mark Mentovai <mark@moxienet.com> SVN-Revision: 29513	2011-12-13 14:59:40 +00:00
Felix Fietkau	48f9717371	ar71xx: add gpios and usb for wzr-hp-g450h SVN-Revision: 29509	2011-12-13 13:33:44 +00:00
Gabor Juhos	4ca2d86493	ar71xx: use RedBoot parser on PB44 SVN-Revision: 29501	2011-12-11 15:52:47 +00:00
John Crispin	934eef78ca	convert to gpiolib Signed-off-by: karlp@tweak.net.au SVN-Revision: 29486	2011-12-09 07:52:10 +00:00
Gabor Juhos	6e69765559	ar71xx: fix WNDR3x00 factory image generation Factory images for WNDR3700v2 and WNDR3800 should contain these model IDs for the device: field in their DNI tags, not WNDR3700. This regressed in r29434, which redid WNDR3x00 model detection. The sixth parameter to Image/Build/Netgear is only used as the -B argument to mkdniimg, which is used to set the device: field. In r29434, this was erroneously changed to be WNDR3700 for all models. The tools to flash factory images (U-Boot's TFTP server and the factory software's upgrade utility) may refuse to honor images with incorrect device: fields in their DNI tags. Signed-off-by: Mark Mentovai <mark@moxienet.com> SVN-Revision: 29473	2011-12-07 06:55:50 +00:00
Gabor Juhos	8eb8a6e1e7	ar71xx: fix WNDR3x00 model detection Detect the model name for /tmp/sysinfo/model based on 10 bytes at offset 56 in the art (caldata) mtd partition. r29434 redid WNDR3x00 model detection, attempting to distinguish between WNDR3700v2 and WNDR3800 by checking MemTotal in /proc/meminfo. However, it contained a bug: it put the awk inside a $(...), with the result that all WNDR3700v2 and WNDR3800 models would be reported as WNDR3800. This patch checks the model name stored in the art partition, as is done by U-Boot shipping on the WNDR3800. It has the likely advantage of working with future models based on the WNDR3700 board. It also will not mis-detect units on which people install more memory. I have tested this patch on WNDR3700 (v1), WNDR3700v2, and WNDR3800. Signed-off-by: Mark Mentovai <mark@moxienet.com> SVN-Revision: 29472	2011-12-07 06:55:39 +00:00
Gabor Juhos	43bd4c6ad1	ramips: fix mac addresses on the DIR-300/600 boards SVN-Revision: 29471	2011-12-06 20:06:08 +00:00
Jonas Gorski	e33bb9ec66	linux: update 3.1 to 3.1.4 SVN-Revision: 29470	2011-12-06 19:50:30 +00:00
Jonas Gorski	6e2ae90f4a	linux: update 3.0 to 3.0.12 SVN-Revision: 29469	2011-12-06 19:50:25 +00:00
Gabor Juhos	c6b2b98812	ar71xx: create firmware image for the TL-WR740N/ND v4 boards Based on a patch by Cristian Deluxe <djcristiandeluxe@gmail.com> SVN-Revision: 29468	2011-12-06 16:26:44 +00:00
Gabor Juhos	fbfad4e9b4	ar71xx: use hw_id, hw_rev and flash_layout with mktplinkfw SVN-Revision: 29467	2011-12-06 16:26:43 +00:00
Gabor Juhos	d753e08c79	ar71xx: fix TL-MR3x20 profile names in image/Makefile SVN-Revision: 29463	2011-12-06 13:53:21 +00:00
Gabor Juhos	62d8009cdd	ar71xx: cleanup TP-Link profiles SVN-Revision: 29461	2011-12-06 10:29:25 +00:00
Gabor Juhos	f7a482d382	ar71xx: add TP-Link board detection SVN-Revision: 29459	2011-12-05 21:11:01 +00:00
Gabor Juhos	bdc2eca7de	ar71xx: use correct mac on the lan interface on several TP-LINK devices SVN-Revision: 29458	2011-12-05 21:10:58 +00:00
Gabor Juhos	0103069372	ar71xx: allow to pass negative offset values for ar71xx_init_mac SVN-Revision: 29457	2011-12-05 21:10:55 +00:00
Gabor Juhos	ada92aee62	ar71xx: don't register PCI controller on AR934x if PCIE_RC bit is not set SVN-Revision: 29456	2011-12-05 18:21:15 +00:00
Gabor Juhos	c6bcf8d1d8	ar71xx: verify hardware id of firmware images on TP-Link boards SVN-Revision: 29455	2011-12-05 18:11:51 +00:00
Gabor Juhos	5ef6ec4a31	ramips: set mac addresses for the NBG-419N Based on a patch by Nerijus Baliunas <nerijus@users.sourceforge.net> SVN-Revision: 29454	2011-12-05 17:27:07 +00:00
Gabor Juhos	750d560767	ramips: set preinit interface mac on the hw550-3g board Based on a patch by Daniel Golle <dgolle@allnet.de> SVN-Revision: 29453	2011-12-05 17:27:06 +00:00
Gabor Juhos	b5d7b359b2	ramips: use ramips_get_mac_* functions in the preinit script SVN-Revision: 29452	2011-12-05 17:27:04 +00:00
Gabor Juhos	4d5b940e66	ramips: move ramips_get_mac_* functions to lib/ramips.sh SVN-Revision: 29451	2011-12-05 17:27:03 +00:00
Gabor Juhos	cc853acb3a	ramips: add ramips_ prefix to get_mac_{binary,nvram} functions SVN-Revision: 29450	2011-12-05 17:27:02 +00:00
Gabor Juhos	b1137d48a4	ramips: fix network configuration setup SVN-Revision: 29448	2011-12-05 16:54:48 +00:00
Gabor Juhos	4dc9092f4b	ar71xx: reclaim some unused space on TP-Link boards With the default OpenWrt configuration, this increases the size of the rootfs_data partition by 384KB/128KB on the older/newer TP-Link models. SVN-Revision: 29447	2011-12-05 14:52:36 +00:00
Gabor Juhos	3e7a6d182a	ar71xx: check squashfs signature in TP-Link mtd parser SVN-Revision: 29446	2011-12-05 14:52:33 +00:00
Gabor Juhos	feebf484ba	ar71xx: use the lzma-loader on TP-Link boards w/o lzma support SVN-Revision: 29444	2011-12-05 14:52:28 +00:00
Gabor Juhos	d42968351f	ar71xx: add lzma loader SVN-Revision: 29443	2011-12-05 14:52:25 +00:00
Felix Fietkau	1f809532de	ar71xx: add preliminary support for wzr-hp-g450h SVN-Revision: 29441	2011-12-05 14:20:51 +00:00
Felix Fietkau	d1f63f8538	ar71xx: move multi-m25p80 concat code from wzr-hp-ag300h mach code to dev-m25p80.c, other buffalo routers use it as well SVN-Revision: 29440	2011-12-05 14:20:44 +00:00
Gabor Juhos	4cc2b9bb06	ar71xx: rewrite WNDR3700/3800 handling SVN-Revision: 29434	2011-12-05 13:03:54 +00:00
Jo-Philipp Wich	78699c2e51	add some missing wndr3800 base-files definitions SVN-Revision: 29433	2011-12-05 12:56:21 +00:00
Gabor Juhos	5177814ade	ar71xx: change user-space board detection SVN-Revision: 29432	2011-12-05 12:56:20 +00:00
Gabor Juhos	8a3a60fc64	ar71xx: allow WNDR3700 image creation to fail if kernel/rootfs too big SVN-Revision: 29431	2011-12-05 12:47:53 +00:00
Gabor Juhos	56c9b50006	ramips: fix argus board rootfs size Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 29422	2011-12-04 15:24:57 +00:00
Gabor Juhos	7cfa39f032	ar71xx: use the tp-link parser on the tp-link boards Also remove static partition maps. SVN-Revision: 29416	2011-12-03 18:13:31 +00:00
Gabor Juhos	514b1167c9	ar71xx: add mtd partition parser for the TP-Link boards SVN-Revision: 29415	2011-12-03 18:13:27 +00:00
Gabor Juhos	fc7fb29bae	ar71xx: run the RedBoot parser only on the RedBoot based boards SVN-Revision: 29414	2011-12-03 18:13:25 +00:00
Gabor Juhos	9cc28d5aa0	ar71xx: run the MyLoader parser only on the WP543 board SVN-Revision: 29413	2011-12-03 18:13:23 +00:00
Gabor Juhos	67a0b9aada	ar71xx: run the wrt160nl parser only on the WRT160NL board Also remove static mtd partition definitions. SVN-Revision: 29412	2011-12-03 18:13:20 +00:00
Gabor Juhos	c8acd6e013	ar71xx: allow to pass part_probe types to the m25p80 driver SVN-Revision: 29411	2011-12-03 18:13:18 +00:00
Gabor Juhos	20483faed0	ar71xx: create initramfs images for the newer TP-Link boards SVN-Revision: 29410	2011-12-03 16:57:23 +00:00
Gabor Juhos	9a2005e5e6	ar71xx: remove swconfig and wpad-mini from custom profiles SVN-Revision: 29408	2011-12-03 16:33:41 +00:00
Gabor Juhos	bc1d818610	ar71xx: add uboot-envtools to the default package list SVN-Revision: 29407	2011-12-03 16:33:40 +00:00
Gabor Juhos	a02a9c3f8b	ar71xx: reclaim unused space in WNDR3700/3800 images Patch by: Mark Mentovai <mark@moxienet.com> SVN-Revision: 29406	2011-12-03 16:33:38 +00:00
Gabor Juhos	ac82296c53	ar71xx: add a profile and build image for the OM2P board [juhosg: the name of the final image has been changed to 'openwrt-ar71xx-generic-om2p-squashfs-factory.bin'] Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> SVN-Revision: 29397	2011-12-01 22:49:05 +00:00
Gabor Juhos	f188f1bad5	ar71xx: add support for Ubiquiti AirRouter Signed-off-by: Gergely Barta <gergely.barta@printerfairkft.hu> SVN-Revision: 29395	2011-12-01 22:49:02 +00:00
Gabor Juhos	0612667c34	ar71xx: configure default led behavior for the OM2P Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> SVN-Revision: 29394	2011-12-01 22:48:59 +00:00
Gabor Juhos	3fccc3b376	ramips: enable sysupgrade on the RT-N15 board SVN-Revision: 29393	2011-12-01 22:48:58 +00:00
Gabor Juhos	4b2d1c3ad3	ramips: wrap long line in platform upgrade script SVN-Revision: 29392	2011-12-01 22:48:57 +00:00
Gabor Juhos	d622263588	ramips: add profile for the Asus RT-N15 This uses previously submitted rtl8366 kernel packages. [juhosg: The kmod-gpio-dev package has been removed from the package list.] Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 29391	2011-12-01 22:48:55 +00:00
Gabor Juhos	3a9e02fa41	ramips: setup default network configuration for RT-N15 Based on a patch by Roman Yeryomin <roman@advem.lv> SVN-Revision: 29390	2011-12-01 22:48:54 +00:00
Gabor Juhos	fc61c107f0	ramips: rt288x: add swconfig and rtl8366{s,_smi} drivers to the default profile It is needed by the RT-N15 board. SVN-Revision: 29389	2011-12-01 22:48:53 +00:00
Gabor Juhos	80221fcd2a	ramips: remove default network configuration, and generate that from uci-defaults SVN-Revision: 29387	2011-12-01 22:48:51 +00:00
Gabor Juhos	4f6c58adac	ramips: use /lib/functions/uci-defaults.sh SVN-Revision: 29386	2011-12-01 22:48:48 +00:00
Gabor Juhos	39348e387f	ar71xx: use /lib/functions/uci-defaults.sh SVN-Revision: 29385	2011-12-01 22:48:47 +00:00
Gabor Juhos	569d8de6d6	ramips: simplify uci-defaults/network script SVN-Revision: 29383	2011-12-01 22:48:45 +00:00
Gabor Juhos	66c9a351dd	ramips: setup mac and network interfaces from separate functions SVN-Revision: 29382	2011-12-01 22:48:43 +00:00
Gabor Juhos	62d18e9f9a	ramips: fix Asus RT-N15 board support Fix Asus RT-N15 flash partitions and make an image. Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 29381	2011-12-01 22:48:42 +00:00
Gabor Juhos	2dd79d55c7	ramips: Sparklan wcr-150gn board fixes * Fix partition sizes. * Add buttons and leds. * Register usb. * Remove unnecessary stuff from image Makefile * Fix rt2x00 eeprom extract. Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 29380	2011-12-01 22:48:41 +00:00
Gabor Juhos	7c678e7511	ramips: fix package name of kmod-input-gpio-buttons Based on a patch from Omnima Limited. SVN-Revision: 29379	2011-12-01 22:48:39 +00:00
Gabor Juhos	2ed38b24a8	ramips: move kmod-rt2800-pci to DEFAULT_PACKAGES Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 29378	2011-12-01 22:48:38 +00:00
Gabor Juhos	295e04084c	ramips: setup bc2 mac addresses from the generic network script SVN-Revision: 29377	2011-12-01 22:48:37 +00:00
Gabor Juhos	02f95d4fb3	ramips: combine network setup for all boards in one file Inspired by the patch from Roman Yeryomin. Thanks, Roman! This removes unnecessary duplication and simplifies network setup for new boards. It would be a one line change most likely. [juhosg: setup lan and wan interfaces for unspecified rt3x0x based boards in order to avoid regression] Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su> SVN-Revision: 29376	2011-12-01 22:48:35 +00:00
John Crispin	88cb7ae104	omap24xx: bump to 3.1.3 SVN-Revision: 29349	2011-11-28 12:46:18 +00:00
John Crispin	bf7316424c	lantiq: bump to 3.1.3 SVN-Revision: 29348	2011-11-28 10:22:58 +00:00
Nicolas Thill	5e83009a52	targets: fix CONFIG_USB_STORAGE_* inconsistency * all options were switched from bool to tristate in 2.6.30 * add/change/move them to generic, disabled by default * remove extinct CONFIG_USB_STORAGE_DPCM dropped in 2.6.29, merged with CONFIG_USB_STORAGE_SDDR09 * remove extinct CONFIG_USB_STORAGE_SIERRA option in 2.6 * cleanup ordering SVN-Revision: 29337	2011-11-25 20:47:44 +00:00
Gabor Juhos	f20797306a	ar71xx: modify phy mask of the WP543 board This fixes ethernet on newer boards. Based on a patch from #9702. SVN-Revision: 29328	2011-11-24 20:09:43 +00:00
Gabor Juhos	c20d7378e5	ar71xx: fix wndr3800 machine name This fixes the machine name in /proc/cpuinfo and luci status page machine name. Signed-off-by: Petri Rosenström <petri.rosenstrom@gmail.com> SVN-Revision: 29326	2011-11-24 20:09:38 +00:00
Gabor Juhos	600b6efc41	ar71xx: copy atheros initramfs images to the image directory SVN-Revision: 29325	2011-11-24 20:09:35 +00:00
Gabor Juhos	d97cf76790	ar71xx: specify mtd layout in command line for the DB120 board SVN-Revision: 29324	2011-11-24 20:09:32 +00:00
John Crispin	9389593db9	lantiq: drop 009-MIPS-make-oprofile-use-cp0_perfcount_irq-if-it-is-se.patch This patch is/was a duplicate of generic/patches-3.1/307-mips_oprofile_fix.patch SVN-Revision: 29294	2011-11-23 12:22:15 +00:00
John Crispin	4982ca983c	lantiq: * fixes ath5k eeprom handling * fixes sx76x * adds sx76x to userland api * minor style cleanups Signed-of-by: Andrej Vlašić <andrej.vlasic0@gmail.com> SVN-Revision: 29292	2011-11-22 18:50:51 +00:00
Florian Fainelli	718907b661	don't package gpioctl by default SVN-Revision: 29288	2011-11-21 16:36:39 +00:00
Nicolas Thill	c33f21ae95	target/uml: export atomic64_* functions on 32-bit x86 SVN-Revision: 29287	2011-11-21 14:28:33 +00:00
Gabor Juhos	9990523a0f	ar71xx: set GE0 phy_mask for AR933x SVN-Revision: 29274	2011-11-20 11:30:10 +00:00
Jo-Philipp Wich	b5739aabd9	fix D-Link DSL-2650U image generation SVN-Revision: 29266	2011-11-19 21:34:51 +00:00
Jonas Gorski	8bac0df4ae	linux: update 3.0 to 3.0.9 SVN-Revision: 29264	2011-11-19 18:39:12 +00:00
Florian Fainelli	ae90aa4efd	build images for D-Link DSL-2650U (#9003 ) SVN-Revision: 29238	2011-11-18 10:37:03 +00:00
Michael Büsch	0b86c2648a	omap24xx: Fix cbus nested IRQ acking SVN-Revision: 29237	2011-11-17 22:31:27 +00:00
Michael Büsch	df2810831c	omap24xx: Fix initialization of software IRQ mask SVN-Revision: 29236	2011-11-17 21:02:00 +00:00
Michael Büsch	3f92f7dd90	omap24xx: Update 3.1 config SVN-Revision: 29234	2011-11-17 19:35:57 +00:00
Michael Büsch	4793be2df9	omap24xx: Some retu/tahvo IRQ fixes SVN-Revision: 29233	2011-11-17 18:06:19 +00:00
Michael Büsch	630bafc5dd	omap24xx: Add basic kexec fixes. SVN-Revision: 29232	2011-11-17 14:57:34 +00:00
Michael Büsch	06c986984e	omap24xx: Add workaround for omapfb locking bug. SVN-Revision: 29201	2011-11-16 22:34:38 +00:00
Michael Büsch	0f03e17bd0	Revert r29193 SVN-Revision: 29195	2011-11-16 19:03:23 +00:00
Michael Büsch	93f02b1ba0	omap24xx: Set platform specific optimization flags SVN-Revision: 29194	2011-11-16 19:02:12 +00:00
Michael Büsch	b058e97af4	n810: Add xmodmap to profile SVN-Revision: 29193	2011-11-16 19:01:19 +00:00
Florian Fainelli	8d66465b08	include bridge and 8021q modules by default SVN-Revision: 29164	2011-11-15 22:24:22 +00:00
John Crispin	bbe96f13a6	lantiq: add runtime generation of /etc/config/network SVN-Revision: 29161	2011-11-15 18:21:00 +00:00
John Crispin	79a4642b40	lantiq: fix falcon build breakage dev-wifi-rt2x00 fails to build on falcon due to missing pci SVN-Revision: 29129	2011-11-14 18:55:58 +00:00
Gabor Juhos	f27548448b	ar71xx: fix USB LED on the DB120 board SVN-Revision: 29126	2011-11-14 17:43:15 +00:00
Gabor Juhos	6ebbb1329d	ar71xx: add a function for selecting output signal on a given GPIO pin SVN-Revision: 29125	2011-11-14 17:43:14 +00:00
Gabor Juhos	0c1d3617d7	ar71xx: fix GPIO function handling on AR934x SVN-Revision: 29124	2011-11-14 17:43:13 +00:00
Gabor Juhos	aa0c8c4885	ar71xx: add AR71XX_ prefix to GPIO_REG_* defines SVN-Revision: 29123	2011-11-14 17:43:11 +00:00
Gabor Juhos	62a7795afd	ar71xx: merge nand scan patch SVN-Revision: 29122	2011-11-14 17:43:10 +00:00
Gabor Juhos	12dae96097	ar71xx: fix a compiler warning SVN-Revision: 29110	2011-11-14 13:07:47 +00:00
Gabor Juhos	5ae0fd802c	ar71xx: fix GPIO count for AR934x SVN-Revision: 29109	2011-11-14 13:07:45 +00:00
Gabor Juhos	e52269364a	ar71xx: flush DDR writeback buffers for WMAC and PCIe on AR934X SVN-Revision: 29108	2011-11-14 11:49:53 +00:00
Gabor Juhos	3104d70552	ar71xx: use a dummy irq chip for WMAC and PCIe irq hadling SVN-Revision: 29107	2011-11-14 11:49:51 +00:00
Gabor Juhos	42e8ae09b5	ar71xx: add AR934X_RESET_REG_PCIE_WMAC_INT_STATUS defines SVN-Revision: 29106	2011-11-14 11:49:49 +00:00
Gabor Juhos	c15caea360	ar71xx: add an irq parameter for ar724x_pcibios_init SVN-Revision: 29105	2011-11-14 11:49:47 +00:00
Gabor Juhos	cf90b24bb9	ar71xx: remove hardwired interface parameters from mach-* files SVN-Revision: 29103	2011-11-14 07:38:09 +00:00
Gabor Juhos	defc79cb40	ar71xx: force hardwired interface parameters in ar71xx_add_device_eth SVN-Revision: 29102	2011-11-14 07:38:07 +00:00
Gabor Juhos	6f4bc1ce37	ar71xx: use if-else instead of conditional operators in ar71xx_add_device_eth SVN-Revision: 29101	2011-11-14 07:38:05 +00:00
Florian Fainelli	7f787707de	build images for Pirelli A226M (#10409 ) SVN-Revision: 29045	2011-11-13 19:19:22 +00:00
Florian Fainelli	5dc2098448	register uart0 on DWV-S0 boards (#10409 ) SVN-Revision: 29044	2011-11-13 19:19:18 +00:00
Florian Fainelli	56a96ba876	refresh 3.0 patches SVN-Revision: 29043	2011-11-13 19:19:14 +00:00
Florian Fainelli	54da5cf11f	refresh 2.6.39 patches SVN-Revision: 29042	2011-11-13 19:19:10 +00:00
Florian Fainelli	717a4391d7	rename 456-board_DWV-S0_ehci.patch to 456-board_DWV-S0_fixes.patch SVN-Revision: 29041	2011-11-13 19:19:05 +00:00
Florian Fainelli	c093c9df34	fix typo, load ip17xx switch module SVN-Revision: 29039	2011-11-13 18:41:26 +00:00
Gabor Juhos	368bbc510b	ar71xx: enable has_gbit flag on AR724{0,1} SVN-Revision: 29026	2011-11-13 17:36:36 +00:00
Gabor Juhos	15d7016c9f	ar71xx: fixup onboard PCIe chip registration on the DB120 board SVN-Revision: 29022	2011-11-13 12:48:03 +00:00
Gabor Juhos	f623066e60	ar71xx: drop DB120_WMAC_MAC_OFFSET, it is not needed SVN-Revision: 29021	2011-11-13 12:48:01 +00:00
Gabor Juhos	d2316b2a45	ar71xx: ag71xx: add support for getting switch port link status SVN-Revision: 29017	2011-11-13 11:27:04 +00:00
Gabor Juhos	d0db89133c	ar71xx: remove mii_ctrl resources of the ethernet devices SVN-Revision: 29016	2011-11-13 11:27:03 +00:00
Gabor Juhos	34015ed6e8	ar71xx: ag71xx: remove unused mii_ctrl field from struct ag71xx SVN-Revision: 29015	2011-11-13 11:27:01 +00:00
Gabor Juhos	2d882cff23	ar71xx: ag71xx: remove unused mii_cfg related functions and defines SVN-Revision: 29014	2011-11-13 11:27:00 +00:00
Gabor Juhos	538a9493b9	ar71xx: set MII interface speed from the set_speed callbacks SVN-Revision: 29013	2011-11-13 11:26:59 +00:00
Gabor Juhos	93cd46be13	ar71xx: rename set_pll callback to set_speed in ag71xx_platform_data Also rename the corresponding callback functions. SVN-Revision: 29012	2011-11-13 11:26:57 +00:00
Gabor Juhos	9579bb4267	ar71xx: ag71xx: remove MII interface setup code SVN-Revision: 29011	2011-11-13 11:26:56 +00:00
Gabor Juhos	da64ce8603	ar71xx: configure MII interface type from ar71xx_setup_phy_if_mode SVN-Revision: 29010	2011-11-13 11:26:54 +00:00
Gabor Juhos	0112153a0e	ar71xx: fix occasional kernel hangs during boot on AR934x The patch taken from the linux-mips mailing list. The Kernel hangs occasionally during boot after "Calibrating delay loop..". This is caused by the c0_compare_int_usable() routine in cevt-r4k.c returning false which causes the system to disable the timer and hang later. The false return happens because the routine is using a series of four calls to irq_disable_hazard() as a delay while it waits for the timer changes to propagate to the cp0 cause register. On newer MIPS cores, like the 74K, the series of irq_disable_hazard() calls turn into ehb instructions and can take as little as a few clock ticks for all 4 instructions. This is not enough of a delay, so the routine thinks the timer is not working. This fix uses up to a max number of cycle counter ticks for the delay and uses back_to_back_c0_hazard() instead of irq_disable_hazard() to handle the hazard condition between cp0 writes and cp0 reads. SVN-Revision: 29009	2011-11-13 11:26:52 +00:00
Gabor Juhos	1afc76ea13	ar71xx: refresh kernel patches SVN-Revision: 29008	2011-11-13 11:26:51 +00:00
Jonas Gorski	d8acb75009	linux: update 3.1 to 3.1.1 SVN-Revision: 29007	2011-11-13 10:48:05 +00:00
John Crispin	a8797d0de6	lantiq: add uci-defaults code for handling leds SVN-Revision: 29004	2011-11-12 23:40:21 +00:00
John Crispin	832e02cd77	lantiq: add /lib/lantiq.sh and make hotplug handlers use it SVN-Revision: 29003	2011-11-12 23:40:16 +00:00
John Crispin	5dcbbf0160	lantiq: rename leds SVN-Revision: 29002	2011-11-12 23:40:12 +00:00
John Crispin	d84b7596d9	lantiq: split compat headers out of bsp header patch SVN-Revision: 29001	2011-11-12 23:40:07 +00:00
John Crispin	2cff80f015	lantiq: adds hotplug handler for loading rt2x00 firmware SVN-Revision: 29000	2011-11-12 23:40:01 +00:00
John Crispin	3660c51c40	lantiq: adds hotplug handler for handling buttons and makes w303v work with it SVN-Revision: 28999	2011-11-12 23:39:56 +00:00
John Crispin	4248705108	lantiq: cleanup default package selection SVN-Revision: 28998	2011-11-12 23:39:51 +00:00
John Crispin	eb20ab87e6	lantiq: w303v has its rt2860 eep on the nor flash. tell compat-wireless how to use it SVN-Revision: 28994	2011-11-12 18:41:15 +00:00
Gabor Juhos	bbfaaeffd6	kernel: ar8216: add support for the AR8236 switch SVN-Revision: 28993	2011-11-12 14:09:52 +00:00
Gabor Juhos	ecb3690d0a	kernel: ar8216: move port vlan setup into a separate function SVN-Revision: 28992	2011-11-12 14:09:50 +00:00
Gabor Juhos	5ad763075e	ar71xx: use the button for WPS control on the DB120 SVN-Revision: 28990	2011-11-12 12:50:20 +00:00
Gabor Juhos	4555be2bec	ar71xx: register the second ethernet interface on the DB120 board SVN-Revision: 28989	2011-11-12 12:50:19 +00:00
Gabor Juhos	368c6605a0	ar71xx: implement SoC specific phy interface setup SVN-Revision: 28988	2011-11-12 12:50:18 +00:00
Gabor Juhos	21d317b9cc	ar71xx: move phy interface setup into a separate function SVN-Revision: 28987	2011-11-12 12:50:16 +00:00
Gabor Juhos	aff0c84ffa	ar71xx: register both MDIO bus on the DB120 board SVN-Revision: 28986	2011-11-12 12:09:59 +00:00
Gabor Juhos	b144249108	ar71xx: add AR934X specific MDIO registration code SVN-Revision: 28985	2011-11-12 12:09:56 +00:00
Gabor Juhos	f835106c8c	ar71xx: add a secondary mdio bus SVN-Revision: 28984	2011-11-12 12:09:54 +00:00
Gabor Juhos	90a42da270	ar71xx: rename ar71xx_mdio_* structures to ar71xx_mdio0_* SVN-Revision: 28983	2011-11-12 12:09:50 +00:00
Gabor Juhos	9daa2149fd	ar71xx: add an id argument to ar71xx_add_device_mdio SVN-Revision: 28982	2011-11-12 12:09:48 +00:00
Gabor Juhos	b07b687aec	ar71xx: pass netdev and miidev pointer to ar71xx_add_device_dsa SVN-Revision: 28981	2011-11-12 12:09:42 +00:00
Gabor Juhos	a9216bb76e	ar71xx: add AR934x specific USB setup SVN-Revision: 28980	2011-11-12 10:54:20 +00:00
Gabor Juhos	346e44105a	ar71xx: register the first ethernet interface on the DB120 board SVN-Revision: 28979	2011-11-12 10:54:18 +00:00
Gabor Juhos	b1ba5e2f3d	ar71xx: allow to register ethernet interfaces for AR934X SVN-Revision: 28978	2011-11-12 10:54:17 +00:00
Gabor Juhos	2f9e535e89	ar71xx: ag71xx: use fixed link parameters if the mii bus is not registered SVN-Revision: 28977	2011-11-12 10:54:16 +00:00
Gabor Juhos	e962b07c8b	ar71xx: add AR934X specific bootstrap and reset register bits SVN-Revision: 28976	2011-11-12 10:54:15 +00:00
Gabor Juhos	d461fdd519	ar71xx: add diag support for the DB120 board SVN-Revision: 28975	2011-11-12 10:54:10 +00:00
Gabor Juhos	d8db8e94c8	ar71xx: fix GPIO direction setup for AR934x SVN-Revision: 28974	2011-11-12 10:54:09 +00:00
Gabor Juhos	43e993e5f5	ar71xx: fix AR934X clock frequency calculation SVN-Revision: 28973	2011-11-12 10:54:08 +00:00
Gabor Juhos	8687fc3e41	ar71xx: generate ubootenv from uci-defaults instead of providing defconfig I noticed most of /etc/defconfig was replaced by /etc/uci-defaults, which is indeed much nicer. So I moved over ubootenv from having a defconfig-entry to also be generated from uci-defaults. Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 28971	2011-11-12 10:54:04 +00:00
John Crispin	fda4ee22a0	lantiq: improve falcon package selection SVN-Revision: 28962	2011-11-11 21:59:11 +00:00
John Crispin	e1dc73be90	lantiq: fix breakage introduced in 3.1 bump SVN-Revision: 28961	2011-11-11 21:59:01 +00:00
Jo-Philipp Wich	be49daffc8	base-files, target: assign name to system timeserver section, makes it easier to set servers on the cli SVN-Revision: 28933	2011-11-10 12:16:41 +00:00
Jonas Gorski	f53128f79b	target: linux: mtd: fix MTDREFRESH to an arbitrary high number To make the ioctl number "stable", use an arbitrary high number to prevent conflicts with new mtd ioctls that would push MTDREFRESH's number. Also make mtd use the in-kernel mtd headers. SVN-Revision: 28893	2011-11-09 21:16:36 +00:00
Felix Fietkau	7a2efd8c28	ar71xx: remove dead code SVN-Revision: 28851	2011-11-08 00:33:20 +00:00
Felix Fietkau	94309039b7	ar71xx: on ar7240, exclude ports from their own port vlan destination mask SVN-Revision: 28850	2011-11-08 00:33:15 +00:00
Felix Fietkau	b06efd636a	kernel: add a top level menuconfig option for enabling lockdep SVN-Revision: 28848	2011-11-08 00:32:57 +00:00
Gabor Juhos	87704b8078	ar71xx: create TL-WA901ND network config from uci-defaults SVN-Revision: 28833	2011-11-07 21:44:24 +00:00
Gabor Juhos	09fdfa444f	ar71xx: create ALL0258N network config from uci-defaults SVN-Revision: 28832	2011-11-07 21:44:23 +00:00
Gabor Juhos	63348f5fed	ar71xx: create NBG{460N,550N,550NH} network config from uci-defaults SVN-Revision: 28831	2011-11-07 21:44:20 +00:00
Gabor Juhos	c3692c8331	ar71xx: create WZR-HP-G300NH network config from uci-defaults SVN-Revision: 28830	2011-11-07 21:44:17 +00:00
Gabor Juhos	ee1a07a11d	ar71xx: create RB-493G network config from uci-defaults SVN-Revision: 28829	2011-11-07 21:44:12 +00:00
Gabor Juhos	d82d063d81	ar71xx: create TL-WR1043ND network config from uci-defaults SVN-Revision: 28828	2011-11-07 21:44:11 +00:00
Gabor Juhos	68be590894	ar71xx: create WRT160NL network config from uci-defaults SVN-Revision: 28827	2011-11-07 21:44:09 +00:00
Gabor Juhos	83901e47c9	ar71xx: create PB92 network config from uci-defaults SVN-Revision: 28826	2011-11-07 21:44:08 +00:00
Gabor Juhos	22ab9fc9ad	ar71xx: create DIR-825-B1 network config from uci-defaults SVN-Revision: 28825	2011-11-07 21:44:07 +00:00
Gabor Juhos	e866ba5753	ar71xx: create TL-WR{841N-v1,941ND} network config from uci-defaults SVN-Revision: 28824	2011-11-07 21:44:03 +00:00
Gabor Juhos	9298c7afe5	ar71xx: create RB-450 network config from uci-defaults SVN-Revision: 28823	2011-11-07 21:44:02 +00:00
Gabor Juhos	ac256f97bd	ar71xx: create RB-450G, RouterStation Pro network config from uci-defaults SVN-Revision: 28822	2011-11-07 21:44:01 +00:00
Gabor Juhos	944ac3f6cf	ar71xx: create RB-433{,U} network config from uci defaults SVN-Revision: 28821	2011-11-07 21:43:58 +00:00
Gabor Juhos	6e8390ae6c	ar71xx: create even more network configs from the uci-defaults script Create the default network configuration dynamically for the AR724x/AR9331 boards. Some other boards are using the same configuration, so convert those as well. SVN-Revision: 28820	2011-11-07 21:43:56 +00:00
Gabor Juhos	b62560413a	ar71xx: create more network configs from the uci-defaults script Create the default network configuration dynamically for the boards with swapped eth0, eth1 interfaces. SVN-Revision: 28819	2011-11-07 21:43:54 +00:00
Gabor Juhos	6c92b26bac	ar71xx: create a bunch of network configs from the uci-defaults script Create the default network configuration dynamically for the boards with a single ethernet interface. SVN-Revision: 28818	2011-11-07 21:43:52 +00:00
Gabor Juhos	0a8e5dbf7b	ar71xx: create generic network config from an uci-defaults script SVN-Revision: 28817	2011-11-07 21:43:51 +00:00
Gabor Juhos	54c034ae7a	ar71xx: remove AP81 defconfig, it is the same as the generic config SVN-Revision: 28816	2011-11-07 21:34:33 +00:00
Gabor Juhos	5b6cc3eb9f	ar71xx: change generated Buffalo firmware versions With version 1.76 the upgrade may fail with newer Buffalo firmwares with a message like this: "You can not update the firmware because the firmware version is earlier than 1.82. Please use 1.82 or later version for firmware update." SVN-Revision: 28815	2011-11-07 21:34:32 +00:00
Imre Kaloz	cc2cf8f3d5	update 3.1 patches SVN-Revision: 28814	2011-11-07 21:13:13 +00:00
Imre Kaloz	c4bc2552a3	update arm mach-types SVN-Revision: 28813	2011-11-07 21:12:26 +00:00
Gabor Juhos	eb9ef60e2d	ar71xx: enable sysupgrade on the WHR-G301N and WHR-HP-GN boards SVN-Revision: 28812	2011-11-07 20:25:00 +00:00
Gabor Juhos	8456840d82	ar71xx: wrap long lines in the upgrade script SVN-Revision: 28811	2011-11-07 20:24:59 +00:00
Gabor Juhos	c60baf78ce	ar71xx: fix WHR-HP-G300N firmware partition offset SVN-Revision: 28810	2011-11-07 20:24:57 +00:00
Gabor Juhos	b27254a2c5	ar71xx: add default network configuration for the WHR-HP-GN SVN-Revision: 28807	2011-11-07 13:32:43 +00:00
Gabor Juhos	034b2b7cde	ar71xx: build image for the Buffalo WHR-HP-GN SVN-Revision: 28806	2011-11-07 12:59:11 +00:00
Gabor Juhos	a801d620a7	ar71xx: add support for the Buffalo WHR-HP-GN board SVN-Revision: 28805	2011-11-07 12:59:10 +00:00
Gabor Juhos	0d9ae0a036	ar71xx: build image for the Buffalo WHR-G301N SVN-Revision: 28804	2011-11-07 12:59:08 +00:00
Gabor Juhos	4509af17ed	ar71xx: add support for the Buffalo WHR-G301N board SVN-Revision: 28803	2011-11-07 12:59:07 +00:00
Gabor Juhos	63784ea2bc	ar71xx: fix WHR-HP-G300N image generation SVN-Revision: 28802	2011-11-07 12:59:05 +00:00
Gabor Juhos	b3b21cb3bf	ar71xx: enable WHR-HP-G300N support in kernel config SVN-Revision: 28801	2011-11-07 12:59:04 +00:00
Gabor Juhos	4aace1e2e3	ar71xx: fix WHR-HP-G300N MTD partitions SVN-Revision: 28800	2011-11-07 12:59:03 +00:00
Michael Büsch	05ce57c005	omap24xx: Add cbus tahvo locking fix. SVN-Revision: 28767	2011-11-05 16:10:18 +00:00
Michael Büsch	6288ac7ed4	omap24xx: Fix n810bm compilation SVN-Revision: 28766	2011-11-05 16:01:53 +00:00
Gabor Juhos	297ac9a7f1	kernel: swconfig: add a missing unlock in error path SVN-Revision: 28753	2011-11-04 14:38:31 +00:00
Jo-Philipp Wich	d6f02b62d4	add timeserver config to target specific system configs as well SVN-Revision: 28750	2011-11-04 12:53:35 +00:00
Felix Fietkau	82bd0a43f1	kernel: merge regression fixes for the netfilter patches to the 3.1 kernel patches (patch by tripolar) SVN-Revision: 28734	2011-11-03 20:02:31 +00:00
John Crispin	95d36d3efe	lantiq: remove obseleted folder. we use 3.1 now SVN-Revision: 28728	2011-11-03 16:33:27 +00:00
John Crispin	ea36ad76bc	lantiq: bump to 3.1 SVN-Revision: 28721	2011-11-03 15:15:52 +00:00
Gabor Juhos	4c985724af	ar71xx: add missing AR71XX_MACH_TL_WR741ND_V4 SVN-Revision: 28709	2011-11-01 14:38:12 +00:00
Gabor Juhos	fc8adbb854	ar71xx: build image for the TL-WR741ND v4 board SVN-Revision: 28708	2011-11-01 11:20:55 +00:00
Gabor Juhos	91f08d47c2	ar71xx: add initial support for the TL-WR741ND v4 board The ethernet port LEDs are not working yet. SVN-Revision: 28706	2011-11-01 11:20:52 +00:00
Gabor Juhos	21e651c9a1	ar71xx: add AR933X GMAC register defines SVN-Revision: 28705	2011-11-01 11:20:50 +00:00
Gabor Juhos	43e2e2e4ef	ar71xx: combine LEDs setup in one file SVN-Revision: 28704	2011-11-01 11:20:49 +00:00
Gabor Juhos	f372620ffa	ar71xx: unify LED names on Planex boards SVN-Revision: 28703	2011-11-01 11:20:47 +00:00
Gabor Juhos	66ab406d5a	ar71xx: unify LED names on Buffalo boards SVN-Revision: 28702	2011-11-01 11:20:46 +00:00
Gabor Juhos	e7586959df	ar71xx: unify LED names on TP-Link boards SVN-Revision: 28701	2011-11-01 11:20:44 +00:00
Gabor Juhos	3a7b12a27d	ar71xx/all0258n: sysupgrade support U-Boot on the ALL0258N needs offset, size and md5 for kernel and rootfs to be stored in the U-Boot environment. If the checksums don't match during boot, a failsafe-system is booted instead. This patch adds a board-specific sysupgrade hack for the all0258n which calculates and updates the checksums for the U-Boot environment. Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 28700	2011-11-01 09:23:32 +00:00
Gabor Juhos	f40557a692	ar71xx/all0258n: add default config This adds default network and uboot-env settings for the ALL0258N. Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 28699	2011-11-01 09:23:31 +00:00
Gabor Juhos	06d9653b36	ar71xx: remove default network config of the mzk-w04nu board as well It works with the generic config. SVN-Revision: 28695	2011-11-01 09:23:25 +00:00
Gabor Juhos	693c777eaf	ar71xx: remove LED setup of nonexistent interfaces on RB750 SVN-Revision: 28693	2011-10-31 14:26:56 +00:00
Gabor Juhos	2bcd612e72	ar71xx: remove default network config of the wnr2000 board It is the same as the generic configuration. SVN-Revision: 28692	2011-10-31 14:26:51 +00:00
Vasilis Tsiligiannis	17ccd4aec4	rt305x: Create factory image for Fonera 2.0n SVN-Revision: 28689	2011-10-31 09:23:44 +00:00
Michael Büsch	29958120a2	omap24xx: Default to linux-3.1 SVN-Revision: 28687	2011-10-30 22:42:00 +00:00
Michael Büsch	c00fd42353	omap24xx: Fix n810 LCD initialization SVN-Revision: 28685	2011-10-30 20:31:45 +00:00
Michael Büsch	f37c24d35f	omap24xx: Fix n810 boot SVN-Revision: 28683	2011-10-30 18:46:45 +00:00
Gabor Juhos	39b3bfcf6a	ar71xx/sysupgrade: use $magic_long instead of $magic when comparing with a 32-bit value Aparently $magic_long was meant here instead of $magic when comparing with 32-bit values. Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 28678	2011-10-30 13:06:30 +00:00
Michael Büsch	fd0e6e1452	omap24xx: Refresh 3.1 config SVN-Revision: 28677	2011-10-29 22:52:44 +00:00
Michael Büsch	ba9ee13744	omap24xx: Refresh 3.1 patches SVN-Revision: 28676	2011-10-29 22:52:07 +00:00
Michael Büsch	e184bfe6f0	Fix tusb patch SVN-Revision: 28675	2011-10-29 22:33:59 +00:00
Michael Büsch	a3db2f2055	omap24xx: Fix MUSB compile SVN-Revision: 28674	2011-10-29 22:26:27 +00:00
Michael Büsch	5dde93038f	omap24xx: Add n800 touchscreen and keypad drivers. Thanks to Marat Radchenko. SVN-Revision: 28673	2011-10-29 20:35:36 +00:00
Michael Büsch	7d123a86e3	omap24xx: Add 3.1 patchset. SVN-Revision: 28672	2011-10-29 19:02:50 +00:00
Gabor Juhos	415814f051	ar71xx: fix typos in image/Makefile SVN-Revision: 28618	2011-10-27 07:54:52 +00:00
Gabor Juhos	1646346798	ar71xx: add initial support for the OpenMesh OM2P board Based on a patch by Marek Lindner <marek@open-mesh.com> SVN-Revision: 28617	2011-10-27 07:54:51 +00:00
Gabor Juhos	d02f22fea1	ar71xx/all0258n: fix partition layout A miscalculation in the original patch makes OpenWrt destroy the failsafe image. Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 28615	2011-10-27 07:54:47 +00:00
Michael Büsch	f15f6bc76f	Update my email address SVN-Revision: 28603	2011-10-26 14:54:26 +00:00
Felix Fietkau	b17bfe4f68	x86: disable crashlog, ioremap of RAM does not work properly here SVN-Revision: 28599	2011-10-26 11:49:25 +00:00
Gabor Juhos	4a70cace09	ar71xx: create image for the WNDR3800 This adds support for the Netgear WNDR3800, it is almost the same as the WNDR3700v2. It just has more RAM so the hd_id had to be adjusted. Signed-off-by: Petri Rosenström <petri.rosenstrom@gmail.com> SVN-Revision: 28597	2011-10-26 06:12:47 +00:00
Jo-Philipp Wich	3d1d93cb0c	target: remove CONFIG_IDE_PROC_FS support as well SVN-Revision: 28586	2011-10-25 16:40:06 +00:00
Jo-Philipp Wich	de7cae82e9	brcm47xx: revert accidentially added EARLY_PRINTK symbol from previous commit SVN-Revision: 28585	2011-10-25 16:19:52 +00:00
Jo-Philipp Wich	a9e64493d8	target: globally disable BSD process accounting SVN-Revision: 28584	2011-10-25 16:18:36 +00:00
Gabor Juhos	ee8077f0fe	ramips: Support for NexAira BC2 The preconfiguration of the USB LED has benn move to the /etc/uci-defaults/leds script. [juhosg] Signed-off-by: Adam Porter <porter.adam at gmail.com> SVN-Revision: 28571	2011-10-24 21:49:36 +00:00
Gabor Juhos	18452a753b	ramips: fix switch-port assignment for HW550-3G WAN is on swtich port 0 for Aztech HW550-3G. Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 28570	2011-10-24 21:49:32 +00:00
Gabor Juhos	68a01c0180	ramips: combine led setup for all boards in one file This removes unnecessary duplication and simplifies led setup for new boards. It would be a one line change most likely. Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su> SVN-Revision: 28569	2011-10-24 21:49:31 +00:00
Gabor Juhos	c8b9086ac5	ar71xx: build image for the Buffalo WHR-HP-G300N Based on a patch by Yoichi Shinoda <shinoda@jaist.ac.jp> SVN-Revision: 28568	2011-10-24 21:49:29 +00:00
Gabor Juhos	9d51cda2db	ar71xx: Buffalo WHR-HP-G300N kernel support The initial support for the Buffalo WHR-HP-G300N box. The code was confirmed to boot and run, but not tested in depth. Known problem: iw phy phy0 info shows: Coverage class: 0 (up to 0m) Available Antennas: TX 0 RX 0 Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp> SVN-Revision: 28567	2011-10-24 21:49:26 +00:00
Gabor Juhos	0ab6be2ba3	ar71xx: build image for the Allnet ALL0258N board Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 28565	2011-10-24 21:49:23 +00:00
Gabor Juhos	d96e321bd1	ar71xx: add kernel support for the Allnet ALL0258N board This patchs adds support for the Allnet ALL0258N outdoor AP/bridge. The ALL0258N is based on the AR7240 SoC paired with an AR9285 radio, it got 8MB of NOR and 32MB SDRAM. Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 28564	2011-10-24 21:49:21 +00:00
Gabor Juhos	ef41e0a61c	ar71xx: don't override CONFIG_FSNOTIFY SVN-Revision: 28563	2011-10-24 21:49:18 +00:00
Jo-Philipp Wich	b61de9c865	base-files: make sure inittab-console-fixup returns with success (#10275 ) SVN-Revision: 28562	2011-10-24 21:35:43 +00:00
Nicolas Thill	b0d9bccafc	x86: allow VDI & VMDK images for all subtargets (closes: #10255 ) SVN-Revision: 28518	2011-10-22 13:09:15 +00:00
Jonas Gorski	40d088446f	linux: generic: refresh patches for 3.1-rc10 Hopefully the last one and identical to final. SVN-Revision: 28492	2011-10-20 10:32:44 +00:00
Jonas Gorski	a136b67604	linux: ar71xx: add support for Mikrotik Routerboard RB493G SVN-Revision: 28423	2011-10-11 23:05:16 +00:00
Jonas Gorski	03f91068d1	ar71xx: add a workaround for ar8316 not always driving the TA bit to low AR8316 behind a GPIO bitbanged MDIO bus fails to drive the turnaround bit to low despite returning a valid value. Ignore it and just use the returned value anyway. SVN-Revision: 28422	2011-10-11 23:05:13 +00:00
Jonas Gorski	b7a2a74823	ar8216: use mdiobus_{read,write} to ensure proper locking SVN-Revision: 28421	2011-10-11 23:05:10 +00:00
John Crispin	0a866293bd	* update patches to 3.0 * add basic vr9 support * backport 3.1 fixes * backport 3.2 queue (falcon) SVN-Revision: 28405	2011-10-10 15:13:46 +00:00
Jonas Gorski	c674c874b7	ag71xx: close a race between the phy state machine and link state A fast stop/start cycle could leave the ag71xx interrupts and tx engine disabled when using a phy driver with a fixed link and the start/stop happens between two phy state machine polls. Prevent this by always forcing the link down on stop regardless of phy state and having a phy connected. SVN-Revision: 28380	2011-10-08 11:37:14 +00:00
Jo-Philipp Wich	ce5e1abbb7	add IDs for Huawai K3770, K3771, K4510 and K4511 to option driver SVN-Revision: 28376	2011-10-06 18:23:16 +00:00
Florian Fainelli	829ae01f16	add missing kernel config symbols SVN-Revision: 28363	2011-10-04 09:15:37 +00:00
Daniel Dickinson	b0345ef184	Was specifying input-polled-keys and not input-keys-polled as the module name. Philip Prindeville - 2011-10-03 03:58:17 SVN-Revision: 28357	2011-10-03 04:39:54 +00:00
Daniel Dickinson	c0a625ffbf	Add patch for linux-3.0 as well. Fix typo from previous submission with input-keys-polled. Philip Prindeville - 2011-10-03 01:44:55 SVN-Revision: 28356	2011-10-03 03:09:20 +00:00
Daniel Dickinson	7e372b6dcf	New x86 platform specific symbol needed for 3.1-rc3.	2011-10-03 03:06:29 +00:00
Daniel Dickinson	541aa8e38e	A lot of these options get set automatically when Geode is selected. Don't make the config more complicated than it needs to be. Philip Prindeville - 2011-08-29 03:15:27 SVN-Revision: 28353	2011-10-03 03:02:42 +00:00
Florian Fainelli	3802769ea1	add vlan definitions for Siemens SE505v2 Hi, this patch adds the correct vlan definitions for the Siemens SE505v2. It applies to trunk as well as backfire (please apply here too). On backfire this also patches brcm-2,4, because brcm47xx base-files is just symlinked to brcm-2.4. It also fixes two whitespace issues. Tested with brcm47xx on both trunk and backfire branch and works as expected. Signed-off-by: Manuel Munz <freifunk@somakoma.de> SVN-Revision: 28336	2011-09-30 12:55:33 +00:00
John Crispin	aecc73de77	The enable function was using the global timeout variable for local operations. This resulted in the value of the global variable being corrupted, thus breaking the code. SVN-Revision: 28310	2011-09-26 10:35:51 +00:00
John Crispin	1ef8066bff	* remove obseleted m25p80 patch SVN-Revision: 28309	2011-09-26 09:36:02 +00:00
John Crispin	cf59e7255d	* rebase 3.0 patches * fold some fixes into existing patches SVN-Revision: 28308	2011-09-26 09:35:02 +00:00
Gabor Juhos	6ac4156136	ar71xx: fix MAC addresses on the DIR-825-B1 board Patch-by: Lukas Kuna SVN-Revision: 28295	2011-09-23 19:56:39 +00:00
Gabor Juhos	e45d7d7006	ar71xx: enable login only on the system console by default SVN-Revision: 28294	2011-09-23 19:56:38 +00:00
Alexandros C. Couloumbis	5fc14dfb87	linux/generic: commit an upstream kernel 3.0 patch (fixes busubox-1.19.2 build failure) SVN-Revision: 28293	2011-09-23 10:00:13 +00:00
Gabor Juhos	49ac36e818	ar71xx: build images for the TP-Link TL-WR703N v1 board Based on a patch by dongyuqi <729650915@qq.com> SVN-Revision: 28279	2011-09-21 11:47:56 +00:00
Gabor Juhos	733399600f	ar71xx: add support for the TP-Link TL-WR703N v1 board Based on a patch by dongyuqi <729650915@qq.com> SVN-Revision: 28277	2011-09-21 11:47:53 +00:00
Gabor Juhos	d3617ac7d3	ar71xx: add AR933x specific USB setup function SVN-Revision: 28276	2011-09-21 11:47:51 +00:00
Gabor Juhos	91340d8af7	ar71xx: add ar71xx_device_reset_rmw helper SVN-Revision: 28275	2011-09-21 11:47:50 +00:00
Gabor Juhos	9fa51d5c38	ar71xx: fix copy&paste bug in WZRHPAG300H profile description SVN-Revision: 28274	2011-09-21 11:47:48 +00:00
Gabor Juhos	079e746fc4	ar71xx: remove 'default [yn]' from machine Kconfig entries SVN-Revision: 28273	2011-09-21 11:47:47 +00:00
Gabor Juhos	73dac07c44	ar71xx: sort AR71XX_MACH_* entries SVN-Revision: 28272	2011-09-21 11:47:45 +00:00
Gabor Juhos	ef2431c8d9	ar71xx: create image for the TP-Link TL-WR743ND v1 Same hardware as WR741ND but with PoE support. Signed-off-by: Paul Fertser <fercerpav@gmail.com> SVN-Revision: 28271	2011-09-21 11:47:44 +00:00
Gabor Juhos	76d0d1a837	ar71xx: create image for the TP-Link TL-WR740N v3 Signed-off-by: Martin Raykov <martin.raykov@gmail.com> SVN-Revision: 28269	2011-09-21 11:47:40 +00:00
Gabor Juhos	93c093057d	generic: jumbo frames support for rtl8366s This patch adds the option to enable jumbo frames on the rtl8366s switch. This is almost exactly the same as the first patch at https://dev.openwrt.org/ticket/7977 and it has been requested in a comment there. I have tested this and it successfully allows devices on the switch using jumbo frames to communicate. Signed-off-by: Ash Hughes <ashley.hughes@blueyonder.co.uk> SVN-Revision: 28267	2011-09-21 11:47:38 +00:00
Felix Fietkau	1bdf65f580	ar71xx: fix register range check for DMA stuck checks (thx, Frédéric Moulins) SVN-Revision: 28213	2011-09-11 17:44:12 +00:00
Jo-Philipp Wich	ba46c7b3c6	Xen DomU: make sure kernel is gzip compressed, pygrub cannot handle xz SVN-Revision: 28197	2011-09-08 22:18:26 +00:00
Felix Fietkau	65d809ef19	ar71xx: do not count normal interrupts as spurious (fixes #10037 ) SVN-Revision: 28182	2011-09-06 05:38:23 +00:00
Felix Fietkau	de8cabe839	ar71xx: clean up profiles, put in kmod-ath9k and wpad-mini by default (fixes #9954 ) SVN-Revision: 28173	2011-09-05 18:37:48 +00:00
Imre Kaloz	ed2c8bdc92	upgrade testing kernel support to 3.1 SVN-Revision: 28165	2011-09-04 15:06:05 +00:00
Imre Kaloz	4f0b1a6602	cleanup config SVN-Revision: 28164	2011-09-04 15:02:37 +00:00
Imre Kaloz	0569cff6e1	refresh patches SVN-Revision: 28163	2011-09-04 15:01:56 +00:00
Imre Kaloz	6d17e13cde	add missing symbols SVN-Revision: 28162	2011-09-04 15:01:25 +00:00
Felix Fietkau	24dfe525c2	brcm47xx: fix padding of trx images, padjffs2 does not work properly on empty files by default SVN-Revision: 28125	2011-08-29 21:23:51 +00:00
Felix Fietkau	cd2c68501c	ar71xx: fix ethernet PLL setting on ar7242 SVN-Revision: 28124	2011-08-29 21:23:46 +00:00
Hamish Guthrie	cc037a5e27	Remove subpage align patch SVN-Revision: 28086	2011-08-25 11:49:55 +00:00
Hamish Guthrie	21f7943561	Re-order patches, add nand sub-page alignment SVN-Revision: 28084	2011-08-25 10:37:30 +00:00
Florian Fainelli	cbd28ad0ec	bump to 2.6.39.4 Since linux gets developed on x86 more than all other hardware, hardly makes sense to have our default x86 version be trailing by over a year. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> SVN-Revision: 28082	2011-08-25 09:35:51 +00:00
Florian Fainelli	d2652dee9d	update alix2 platform driver Add support for Ed Wildgoose's alix platform driver plus my enhancement to add GPIO soft button support. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> SVN-Revision: 28081	2011-08-25 09:35:45 +00:00
Jonas Gorski	71adaae258	kernel: add two missing config symbols for 3.1 SVN-Revision: 28080	2011-08-24 11:43:25 +00:00
Gabor Juhos	72e117ec79	ramips: rt305x: add support for the ZyXEL NBG-419N board SVN-Revision: 28078	2011-08-22 20:41:49 +00:00
Gabor Juhos	4b96d3af2a	ramips: rt305x: remove unused defines from mach-nw718.c SVN-Revision: 28077	2011-08-22 20:41:48 +00:00
Gabor Juhos	462ca22e9c	ramips: sort Makefile entries SVN-Revision: 28076	2011-08-22 20:41:47 +00:00
Gabor Juhos	d50494f3bb	ramips: sort RAMIPS_MACH_* defines SVN-Revision: 28075	2011-08-22 20:41:45 +00:00
Gabor Juhos	90686691ce	ramips: fix wireless firmware extraction for wr512-3gn Signed-off-by: Andrew Andrianov <necromant@necromant.ath.cx> SVN-Revision: 28073	2011-08-22 18:08:45 +00:00
Gabor Juhos	f0049824b9	ramips: remove 'default [yn]' keywords from machine Kconfig entries SVN-Revision: 28054	2011-08-19 15:55:12 +00:00
Gabor Juhos	6720025497	ramips: rt305x: fix wr512n image generation SVN-Revision: 28053	2011-08-19 15:55:11 +00:00
Gabor Juhos	9085b05d9e	ramips: rt305x: support for wr512-3gn-like routers Signed-off-by: Andrew Andrianov <necromant@necromant.ath.cx> SVN-Revision: 28052	2011-08-19 15:55:10 +00:00
Gabor Juhos	46b101ad0a	ramips: register usb on Belkin F5D8235 v2 and Argus ATP-52-B routers Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 28051	2011-08-19 15:55:08 +00:00
Gabor Juhos	05209860da	ramips: fix wireless on Belkin F5D8235 v2 Fix wireless firmware extract from flash for Belkin F5D8235 v2. Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 28050	2011-08-19 15:55:07 +00:00
Gabor Juhos	f8ab604eb6	ramips: fix typo in default packages Fix fivebytepypo - there is no such kernel module wpad-mini :) Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 28049	2011-08-19 15:55:05 +00:00
Hamish Guthrie	048d4aca76	omap35xx: Add 3.0.3 kernel support for Gumstix SVN-Revision: 28047	2011-08-19 12:00:08 +00:00
Hauke Mehrtens	464539b074	kernel: update to version 3.0.3 SVN-Revision: 28043	2011-08-18 12:54:12 +00:00
Jo-Philipp Wich	ebb152295b	fix the default network configuration for the ASUS WL-330gE (#8751 ) SVN-Revision: 28024	2011-08-17 03:16:59 +00:00
Hauke Mehrtens	09b1073f9b	kernel: update kernel to version 2.6.39.4 SVN-Revision: 28022	2011-08-16 22:04:10 +00:00
Jonas Gorski	3e94ee9642	kernel: generic: refresh patches for 3.1-rc2 SVN-Revision: 28021	2011-08-16 21:42:15 +00:00
Gabor Juhos	ace8ce0845	ramips: use maccalc instead of hexdump + sed SVN-Revision: 28007	2011-08-15 19:00:23 +00:00
Gabor Juhos	bfc47ffead	ramips: rt305x: fix mac addresses on the Netcore NW718 board SVN-Revision: 28006	2011-08-15 18:55:53 +00:00
Gabor Juhos	17c041cd0b	ramips: add maccalc to the default package list SVN-Revision: 28005	2011-08-15 18:55:52 +00:00
Gabor Juhos	67e480971c	ramips: add input drivers to the default package list SVN-Revision: 28003	2011-08-15 18:55:50 +00:00
Gabor Juhos	35ecf12059	ramips: rt305x: make config and factory partitions read-only on the ATP-52B SVN-Revision: 28002	2011-08-15 18:55:48 +00:00
Gabor Juhos	75e2360ab3	ramips: add uci-defaults scripts to preconfigure USB LEDs SVN-Revision: 28000	2011-08-15 14:12:00 +00:00
Gabor Juhos	e1b176de82	ramips: rt305x: add some USB modules to the default profile SVN-Revision: 27999	2011-08-15 14:11:58 +00:00
Gabor Juhos	169d68c98c	ramips: rt305x: add dwc_otg driver Based on a patch by Layne Edwards <ledwards@astrumtech.net> SVN-Revision: 27997	2011-08-15 14:11:55 +00:00
Gabor Juhos	0ca16a4600	ramips: rt305x: register the dwc_otg device on the relevant boards SVN-Revision: 27996	2011-08-15 14:11:52 +00:00
Gabor Juhos	addc86fdbd	ramips: rt305x: add dwc_otg platform device Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su> SVN-Revision: 27995	2011-08-15 14:11:51 +00:00
Gabor Juhos	6ef87ff5e6	ramips: sync kernel config SVN-Revision: 27993	2011-08-15 14:11:48 +00:00
Gabor Juhos	4ee4fc9725	ramips: load the input drivers during preinit SVN-Revision: 27992	2011-08-15 14:11:47 +00:00
Gabor Juhos	a3c7e71ae1	ramips: add support for Argus ATP-52B [The ESW related changes has been removed - juhosg] Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 27991	2011-08-15 14:11:45 +00:00
Gabor Juhos	1ebcf03789	ramips: allow to specify port layout for the switch of the RT305x/RT3350 Based on a patch by Roman Yeryomin <roman@advem.lv> SVN-Revision: 27990	2011-08-15 14:11:43 +00:00
Gabor Juhos	bb64fb2e58	generic: ar8216: add support for get link status SVN-Revision: 27989	2011-08-15 14:11:41 +00:00
Felix Fietkau	50817f6afe	kernel: disable cfi cmdset 0002 erase suspend on some platforms, erase suspend leads to data corruption and lockups when write ops collide with erase ops. this has been observed on the buffalo wzr-hp-g300nh. rather than play whack-a-mole with a hard to reproduce issue on a variety of devices, simply disable erase suspend, as it will usually not produce any useful gain on the small filesystems used on embedded hardware. SVN-Revision: 27984	2011-08-15 00:15:36 +00:00
Felix Fietkau	12c84f8eeb	ar71xx: add some code to detect DMA stuck conditions on ar7240 SVN-Revision: 27975	2011-08-13 22:30:14 +00:00
Felix Fietkau	85ccc74e1b	ar71xx: on ar724x only reset the link status in the restart handler, the fast reset takes care of DMA stuck issues SVN-Revision: 27973	2011-08-13 21:49:46 +00:00
Hauke Mehrtens	77218b0338	brcm47xx: fix flash detection on chipcommon less devices. This closes #9906 Thank you for the report Kim SVN-Revision: 27967	2011-08-12 16:37:22 +00:00
Felix Fietkau	82a05d1a19	initramfs: allow preinit to enable switching from initramfs to tmpfs to allow overlayfs to be mounted on top of it SVN-Revision: 27960	2011-08-11 20:32:57 +00:00
Felix Fietkau	d26bb6c59c	ar71xx: adjust the mtd layout of tew-632brp and dir-615c to match the image layout (fixes #9922 ) SVN-Revision: 27959	2011-08-11 13:52:40 +00:00
Florian Fainelli	ce2ced7311	package more board specific modules: - keyboard matrix driver - SoC sound support based on patch by KanjiMonster SVN-Revision: 27957	2011-08-11 11:18:44 +00:00
Florian Fainelli	f7dbf2ef04	add more missing touchscren symbols (3.0+) SVN-Revision: 27956	2011-08-11 11:18:41 +00:00
Florian Fainelli	11b1f687d4	disable hardware perf support to work in qemu SVN-Revision: 27955	2011-08-11 11:18:37 +00:00
Hauke Mehrtens	20de21593b	kernel: revert r27953 KanjiMonster did the right patch, I was just confused because of linux-3.0 and linux-2.6.30 SVN-Revision: 27954	2011-08-11 09:54:02 +00:00
Hauke Mehrtens	409f8211e1	kernel: fix ocf patch for kernel 2.6.30 find_task_by_vpid is already exported by the kernel without any patches needed. SVN-Revision: 27953	2011-08-11 09:47:36 +00:00
Jonas Gorski	7304dcad2a	kernel: 2.6.30: remove bogus additional find_task_by_vpid export from OCF find_task_by_vpid is already exported, thus breaking builds. SVN-Revision: 27952	2011-08-11 09:46:30 +00:00
Jonas Gorski	def60e2918	ar71xx: make ehci patch apply again SVN-Revision: 27951	2011-08-10 23:02:56 +00:00
Felix Fietkau	9e5ead9a51	ar71xx: fix a copy&paste bug that broke wzr-hp-g300nh and wzr-hp-ag300h images (#9918 ) SVN-Revision: 27950	2011-08-10 22:24:56 +00:00
Florian Fainelli	b59ab7d13b	fix ehci build on 3.0+ SVN-Revision: 27946	2011-08-10 11:37:25 +00:00
Florian Fainelli	0e40c19b45	add ignore_oc in struct ehci_hcd SVN-Revision: 27945	2011-08-10 11:37:21 +00:00
Florian Fainelli	458716389c	update to 3.0.1 SVN-Revision: 27943	2011-08-09 13:13:22 +00:00
Florian Fainelli	f124358722	add CONFIG_EARLY_PRINTK SVN-Revision: 27942	2011-08-09 13:13:16 +00:00
Jonas Gorski	6b5f483efa	bcm63xx: add support for linux 3.1-rc1 SVN-Revision: 27941	2011-08-09 12:19:49 +00:00
Jonas Gorski	cf2070bd5b	linux: generic: add support for 3.1-rc1 SVN-Revision: 27940	2011-08-09 12:19:43 +00:00
Daniel Dickinson	7ef004a144	Add packages that will be relant as "There's a new Alix platform driver hitting linux-next upstream. Get ready for it in 2.6.39.4 and 3.0. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>" SVN-Revision: 27929	2011-08-08 02:33:18 +00:00
Felix Fietkau	ba9e7889dd	kernel: fix another typo in the netfilter optimization patches SVN-Revision: 27927	2011-08-07 21:17:18 +00:00
Hauke Mehrtens	6f4151b7f0	kernel: add missing option SVN-Revision: 27925	2011-08-06 16:46:04 +00:00
Felix Fietkau	ac96ae6731	kernel: add missing checks in the netfilter optimization patch which broke some rules containing only source/destination address checks SVN-Revision: 27923	2011-08-06 12:39:31 +00:00
Hauke Mehrtens	a1d5ad7655	uml: add some missing options SVN-Revision: 27921	2011-08-06 11:23:45 +00:00
Hauke Mehrtens	d447cb5164	kernel: add some missing config options These options where found by buildbot SVN-Revision: 27920	2011-08-06 10:41:15 +00:00
Hauke Mehrtens	51be984655	kernel: update to kernel version 3.0.1 SVN-Revision: 27918	2011-08-06 09:51:55 +00:00
Florian Fainelli	55e020cd14	update to kernel 3.0 SVN-Revision: 27912	2011-08-05 13:48:42 +00:00
Florian Fainelli	698c1b4952	add more missing config symbols SVN-Revision: 27911	2011-08-05 13:48:38 +00:00
Florian Fainelli	48af2495b4	update to kernel 3.0 SVN-Revision: 27910	2011-08-05 13:48:35 +00:00
Florian Fainelli	a8e79cbdf8	add 101-perf_arm_uclibc.patch to 3.0 patches SVN-Revision: 27909	2011-08-05 13:48:31 +00:00
Florian Fainelli	c99d08f050	add missing config symbol SVN-Revision: 27908	2011-08-05 13:48:28 +00:00
Gabor Juhos	7e5a1bc1d0	ar71xx: fix image generation SVN-Revision: 27907	2011-08-05 10:31:52 +00:00
Hauke Mehrtens	77966b81d8	brcm47xx: use kernel 3.0 As this target changes often these days it is hard to support more kernel versions. Now only kernel 3.0 is supported. SVN-Revision: 27906	2011-08-04 20:10:24 +00:00
Hauke Mehrtens	8428ebd8e8	brcm47xx: update patches * this adds sflash support for ssb devices * the flash is now a platform device * minor updates SVN-Revision: 27902	2011-08-04 20:04:54 +00:00
Gabor Juhos	85b858fae6	ar71xx: enable sysupgrade on the AP96 and DB120 boards SVN-Revision: 27901	2011-08-04 19:41:18 +00:00
Gabor Juhos	fb77134596	ar71xx: use the same test for AP121 and Zcomax sysupgrade images SVN-Revision: 27900	2011-08-04 19:41:17 +00:00
Gabor Juhos	fd3a5f64f2	ar71xx: cleanup image generation Makefile SVN-Revision: 27899	2011-08-04 19:41:16 +00:00
Felix Fietkau	4b75394056	ar71xx: fix ethernet FIFO state corruption on ar7240 When starting/stopping DMA sometimes the FIFO state gets corrupted, leading to wildly fluctuating latencies or packet data corruption. Fix this by issuing a fast MAC reset as soon as the link is detected as up. Fixes #9689, #9405 SVN-Revision: 27896	2011-08-04 17:36:31 +00:00
Felix Fietkau	d2aeca6b6d	ag71xx: fix memory corruption issues on ar7240 on ethernet start/stop When the DMA engine state gets corrupted due to a hardware issues, it often won't stop rx until a full reset is issued. In that case the hardware must keep a valid descriptor, otherwise it will write to random places in system RAM, triggering random crashes. To fix this, keep a dummy descriptor without a buffer that keeps the DMA engine in a sane state until the reset is done SVN-Revision: 27895	2011-08-04 17:36:27 +00:00
Felix Fietkau	500c3a1475	ar71xx: fix MAC/MDIO reset mask handling SVN-Revision: 27894	2011-08-04 17:36:23 +00:00
Jonas Gorski	3b36e83a29	generic: Add missing config symbol SVN-Revision: 27887	2011-08-03 23:28:00 +00:00
Florian Fainelli	4543f6d659	remove 8*1-usb_serial_endpoint_size.patch This is breaking some devices out there such as Winchiphead CH341 adapters (#9601) SVN-Revision: 27885	2011-08-03 13:23:21 +00:00
Florian Fainelli	c37a9544bf	add support for BCM6345 Ethernet DMA engine SVN-Revision: 27881	2011-08-02 18:55:55 +00:00
Florian Fainelli	11c4128770	improve BCM6345 support - runtime detect the amount of memory available - define EBI_BASE as MPI_BASE to get rid of chip-select specific hacks - fix GPIO control SVN-Revision: 27880	2011-08-02 18:55:46 +00:00
Florian Fainelli	c4af036ec7	refresh 3.0 patches SVN-Revision: 27879	2011-08-02 18:55:38 +00:00
Felix Fietkau	54d97e6782	ar71xx: add some hacks to work around the misalignment in IP packets received on AR71xx and AR91xx ethernet MACs decreases CPU load with the default firewall for routing 95 mbit/s from 78% to 55% SVN-Revision: 27878	2011-08-02 15:12:08 +00:00
Florian Fainelli	a0ce3668a6	fix r6040 multicast patch, thanks nicolas le falher SVN-Revision: 27876	2011-08-02 14:13:00 +00:00
Jonas Gorski	ed2b7cd342	linux/generic: remove obsolete kernel options from 3.0 Also fix one typo. SVN-Revision: 27875	2011-08-02 09:58:16 +00:00
Jonas Gorski	61e2e03311	kernel: Fix firewire for 2.6.37+ The old ieee1394 stack was removed in 2.6.37. The new firewire stack is available for all kernel versions, but experimental for the older one, so make both available where appropriate. SVN-Revision: 27874	2011-08-02 09:53:19 +00:00
Felix Fietkau	62b8cba9c0	kernel: enable inotify by default (#8055 ) SVN-Revision: 27853	2011-07-31 18:12:23 +00:00
Felix Fietkau	19eaf1c5f7	kernel: add a new version of my netfilter speedup patches for linux 2.6.39 and 3.0 SVN-Revision: 27840	2011-07-30 15:39:52 +00:00
Imre Kaloz	e4b6839fd3	upgrade to 3.0 (magicbox ata and openrb usb is broken, but the current kernel didn't compile at all, so...) SVN-Revision: 27826	2011-07-29 10:16:48 +00:00
Jonas Gorski	e18ceb1dac	ar71xx: merge WZR-HP-G301NH support into WZR-HP-G300NH Now that we can use a generic name for the switch there is no need for a separate image for the WZR-HP-G301NH. Update the default network config and remove the extra image. SVN-Revision: 27814	2011-07-28 11:57:51 +00:00
Gabor Juhos	ea211c4d90	ramips: rt305x: add support for the Netcore NW718 board SVN-Revision: 27813	2011-07-28 10:56:32 +00:00
Gabor Juhos	437e184484	ramips: rt305x: add support for the Asus RT-G32 B1 board Based on a patch by: Sergiy <piratfm@gmail.com> SVN-Revision: 27812	2011-07-28 10:56:30 +00:00
Gabor Juhos	7193f29d96	ramips: rt305x: enable M25P80 driver Based on a patch by Sergiy <piratfm@gmail.com> SVN-Revision: 27811	2011-07-28 10:56:28 +00:00
Gabor Juhos	c6db514de8	ramips: rt305x: introduce rt305x_register_spi helper Based on a patch by Sergiy <piratfm@gmail.com> SVN-Revision: 27810	2011-07-28 10:56:27 +00:00
Gabor Juhos	57122e7ccc	ramips: add SPI controller driver Based on a patch by Sergiy <piratfm@gmail.com> SVN-Revision: 27809	2011-07-28 10:56:25 +00:00
Gabor Juhos	3f986df05f	ramips: rt305x: add support for the DIR-600 B1,B2 boards SVN-Revision: 27808	2011-07-28 10:56:24 +00:00
Gabor Juhos	857c1028ac	ramips: rt305x: change machine id for DIR-300 SVN-Revision: 27807	2011-07-28 10:56:22 +00:00
Gabor Juhos	42d3a55347	ramips: rt305x: rename LEDs on the DIR-300-B1 SVN-Revision: 27806	2011-07-28 10:56:21 +00:00
Gabor Juhos	39689b648f	ramips: rt305x: sort Kconfig/Makefile entries SVN-Revision: 27805	2011-07-28 10:56:19 +00:00
Gabor Juhos	32c0534516	ramips: rt305x: fix uci-defaults/network script for the RT3350 based boards This change corrects expected CPU name of Ralink RT3050, which describes itself as RT3350 (this name is ripped off chip and elevated to user space via /proc/cpuinfo.) This patch fixes wired network on DIR-300 rev B and DIR-600 rev B Signed-off-by: Slawomir Cygan <wiewior@wiewior.eu.org> SVN-Revision: 27804	2011-07-28 10:56:18 +00:00
Gabor Juhos	57663ce25b	ramips: fix PWH2004 image generation SVN-Revision: 27803	2011-07-28 10:56:15 +00:00
Jonas Gorski	eaa935658b	swconfig: Add generic switch identifiers Also make switches available under a generic name "switch<num>" for device name agnostic access. The old device name is used as an alias for backward compatibility. SVN-Revision: 27800	2011-07-27 18:00:18 +00:00
Felix Fietkau	4da138d899	x86/alix2: include WAN interface by default Include WAN interface by default, instead of putting both ports in the LAN bridge. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> SVN-Revision: 27787	2011-07-26 16:37:48 +00:00
Felix Fietkau	41db64f8e0	x86/alix2: fix typo in target makefile Cut and paste cruft from borrowing from Geos platform. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> SVN-Revision: 27786	2011-07-26 16:37:44 +00:00
Hauke Mehrtens	80956276a7	x86: add missing config symbols This adds some config symbols for kernel 3.0. Thank you realopty for the patch. This is from #9719. SVN-Revision: 27775	2011-07-25 21:21:01 +00:00
Jonas Gorski	4e6c93bef1	bcm63xx: Fix SPI commands and register offsets for BCM6348 In 240-spi.patch, spi registers for bcm6348 were all messed up. This patch fixes that. It also fixes some spi commands for all bcm63xx. Signed-off-by: Anthony Blakemore <stokie-ant@raverbaby.co.uk> SVN-Revision: 27774	2011-07-25 19:52:47 +00:00
Imre Kaloz	f0f10fa599	add missing symbols for generic and x86 on 3.0, based on Philip Prindeville's patch SVN-Revision: 27762	2011-07-24 22:04:08 +00:00
Jo-Philipp Wich	f66871e836	From: George Kashperko <george@znau.edu.ua> Issue map read after Write Buffer Load command to ensure chip is ready to receive data. Signed-off-by: George Kashperko <george@znau.edu.ua> SVN-Revision: 27760	2011-07-24 15:37:00 +00:00
Jo-Philipp Wich	6eb9e39bc4	refresh 501-yaffs_cvs_2009_04_24.patch for Linux 3.0 final SVN-Revision: 27759	2011-07-24 15:36:33 +00:00
Hauke Mehrtens	4815eaa4c3	brcm47xx: run ssb_pcicore_fix_sprom_core_index just for ssb bus on pci ssb_pcicore_fix_sprom_core_index accesses the sprom on the pci bus but this causes a data bus error (oops) on a SoC. SVN-Revision: 27758	2011-07-24 15:18:29 +00:00
Felix Fietkau	9e4113b493	ar71xx: autodetect rtl8366s/rtl8366rb on wzr-hp-g300nh SVN-Revision: 27756	2011-07-24 14:40:35 +00:00
Felix Fietkau	5b32d62fcf	rtl8366_smi: implement a function for detecting whether the attached switch is RTL8366S or RTL8366RB SVN-Revision: 27755	2011-07-24 14:40:31 +00:00
Felix Fietkau	1afe8a0726	rtl8366: unify rtl8366s and rtl8366rb platform data SVN-Revision: 27754	2011-07-24 14:40:23 +00:00
Hauke Mehrtens	00dd85d8f6	ocf-linux: version bump to 20110720 Fixes problem with TFM allocation in cryptosoft.c Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> Hauke: * remove ubsec_ssb package and take it from ocf-linux * use patches from ocf-linux package * refresh all patches * readd some build fixes for OpenWrt. * readd CRYPTO_MANAGER dependency SVN-Revision: 27753	2011-07-24 14:17:58 +00:00
Felix Fietkau	b5e3f6cd81	x86: 2.6.39 requires additional symbol Sysfs support for DMI BIOS was added in 2.6.39. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> SVN-Revision: 27749	2011-07-24 09:41:07 +00:00
Felix Fietkau	a6f7e72cf7	atheros: fix mii phy read/write ioctl Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> SVN-Revision: 27747	2011-07-24 09:11:10 +00:00
Felix Fietkau	6d3bddb056	geos: include pppstats and pppdump in default packaging As the Geos box includes an ADSL modem that's targeted towards PPPoE, PPPoA, and bridged utilization, including these useful tools allows for easier configuration and troubleshooting. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> SVN-Revision: 27743	2011-07-24 08:41:58 +00:00
Felix Fietkau	9105dad418	ar71xx: enable the usb power regulator on the wzr-hp-ag300h through gpio 2 (#9684 ) SVN-Revision: 27739	2011-07-24 08:02:20 +00:00
Imre Kaloz	193845ce7a	upgrade to 3.0 SVN-Revision: 27738	2011-07-23 20:44:08 +00:00
Imre Kaloz	5e29e14795	upgrade to 3.0 SVN-Revision: 27737	2011-07-23 20:43:53 +00:00
Imre Kaloz	0cb1b5d775	3.0 is out SVN-Revision: 27736	2011-07-23 20:42:58 +00:00
Hauke Mehrtens	49f4d4217e	brcm47xx: build bcma into the kernel Now we can assume that every brcm47xx kernel has the bcma module build into the kernel. This is not needed for this version as this does not support bcma as system bus but kernel 3.0 will. SVN-Revision: 27733	2011-07-23 11:19:58 +00:00
Hauke Mehrtens	5169b72c8a	kernel: update bcma and ssb to version master-2011-07-22 from wireless-testing SVN-Revision: 27731	2011-07-23 11:17:00 +00:00
Hauke Mehrtens	b07b5fc7b6	brcm47xx: remove old kernel versions SVN-Revision: 27724	2011-07-22 18:41:24 +00:00
Hauke Mehrtens	b988168906	brcm47xx: update bcma and ssb to master-2011-07-21 * add new patches for bcm4716 SoC * add support for serial flash on bcma bus SVN-Revision: 27723	2011-07-22 16:30:42 +00:00
Hauke Mehrtens	39f491e479	kernel: update to linux-3.0 and refresh patches. Thank you Peter Wagner for the patch SVN-Revision: 27722	2011-07-22 16:04:25 +00:00
Felix Fietkau	c7173a211d	ar71xx: reinitialize global switch settings after reset on ar7240 SVN-Revision: 27705	2011-07-20 14:39:47 +00:00
Felix Fietkau	ca473833c4	ar71xx: configure address aging on ar7240 SVN-Revision: 27704	2011-07-20 14:39:42 +00:00
Felix Fietkau	fefc79f3cb	ar71xx: reset the phy in the ethernet init on ar724x SVN-Revision: 27703	2011-07-20 12:04:34 +00:00
Felix Fietkau	005fe5d1fd	ar71xx: make sure that rx and interrupts are disabled before issuing the hardware reset SVN-Revision: 27702	2011-07-20 12:04:29 +00:00
Felix Fietkau	e7ab000008	ar71xx: increase the delay after the ethernet MAC reset SVN-Revision: 27701	2011-07-20 12:04:25 +00:00
Felix Fietkau	255dcaa3a6	ar71xx: fix an unused variable warning SVN-Revision: 27700	2011-07-20 12:04:20 +00:00
John Crispin	8acc276692	sync default kernel config for lantiq danube/ar9 SVN-Revision: 27697	2011-07-19 18:08:09 +00:00
John Crispin	500d7d4bc8	fix etehrnet when using EPHY on lantiq ASE SVN-Revision: 27696	2011-07-19 18:06:52 +00:00
John Crispin	78a9b1a2ad	fixes pci on lantiq AR9 SoC SVN-Revision: 27695	2011-07-19 18:06:42 +00:00
John Crispin	3833b7be24	add support for more lantiq AR9 boards SVN-Revision: 27694	2011-07-19 18:06:33 +00:00
Felix Fietkau	fee32761f3	kernel: backport and enable tmpfs xattr support for 2.6.39 SVN-Revision: 27691	2011-07-19 09:00:55 +00:00
John Crispin	6b8c119b41	* fix external interrupts SVN-Revision: 27687	2011-07-18 16:27:11 +00:00
John Crispin	5906377332	* add gigasx76x update * rebase patches * add arv752DPW arv7525PD * fixes gpio_keys Signed-off-by: Luka Perkov <openwrt@lukaperkov.net> Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 27665	2011-07-17 19:27:44 +00:00
Florian Fainelli	3994a2d1f9	add additionnal debug symbols when kernel debugging is enabled SVN-Revision: 27637	2011-07-17 12:30:04 +00:00
Florian Fainelli	9c7294f7c7	add ehci support to DWV-S0 board (#9059 ) SVN-Revision: 27622	2011-07-16 08:39:04 +00:00
Florian Fainelli	930485561c	fix GEN_SPI_RSET_BASE macro (#9697 ) SVN-Revision: 27604	2011-07-13 09:33:11 +00:00
Imre Kaloz	ab5fd3c1cb	upgrade to 3.0-rc7 SVN-Revision: 27600	2011-07-12 13:44:16 +00:00
Imre Kaloz	0321740a62	upgrade to 3.0-rc6 and optimize for armv5te again SVN-Revision: 27592	2011-07-11 20:35:16 +00:00
Felix Fietkau	f3d693c0ee	ar71xx: do not reset the hardware on transmit timeout - this would mess up the up the PHY state SVN-Revision: 27568	2011-07-09 06:30:13 +00:00
Felix Fietkau	2806c75c07	ag71xx: keep the rx engine stopped while the link is not up, should hopefully fix stability issues from #9405 SVN-Revision: 27567	2011-07-09 06:29:46 +00:00
Imre Kaloz	8788b97e65	use the new upstream l2cache and wdt code, smaller changes, refresh patches SVN-Revision: 27558	2011-07-08 09:41:07 +00:00
Imre Kaloz	b3b0f0e49a	add mpcore_wdt fixes SVN-Revision: 27557	2011-07-08 09:33:13 +00:00
John Crispin	7f548d379f	fix generation of falcon images for profiles SVN-Revision: 27550	2011-07-07 20:20:51 +00:00
John Crispin	d7732885ed	adds 2 ASC related patches to lantiq Signed-off-by: Thomas Langer <thomas.langer@lantiq.com> SVN-Revision: 27549	2011-07-07 20:20:46 +00:00
John Crispin	b75a8fb532	fix up falcon kernel config SVN-Revision: 27542	2011-07-07 18:20:56 +00:00
John Crispin	036df9f088	fix i2c-falcon kmod package selection SVN-Revision: 27541	2011-07-07 18:20:51 +00:00
John Crispin	a463daa818	replace all references to xway with danube SVN-Revision: 27538	2011-07-07 18:20:37 +00:00
John Crispin	dc2af33083	fix lantiq image makefile to represent new split between ar9 and danube SVN-Revision: 27537	2011-07-07 18:20:31 +00:00
John Crispin	3c1079a7a7	add ar9 specific profile SVN-Revision: 27536	2011-07-07 18:20:27 +00:00
John Crispin	09d547eae4	rename xway profile to danube and remove ar9 specifics SVN-Revision: 27535	2011-07-07 18:20:21 +00:00
John Crispin	f177052c9d	remove ar9 board from xway profiles SVN-Revision: 27534	2011-07-07 18:20:16 +00:00
John Crispin	dc69e5f2e3	remove CONFIG_MTD_PARTITIONS references from lantiq 3.0 patches SVN-Revision: 27532	2011-07-07 18:20:07 +00:00
Imre Kaloz	79fa6c693a	refresh patches SVN-Revision: 27528	2011-07-07 17:18:50 +00:00
Imre Kaloz	b8227050fb	refresh patches SVN-Revision: 27527	2011-07-07 17:18:06 +00:00
Imre Kaloz	92981b6bb3	enable smp support SVN-Revision: 27526	2011-07-07 17:17:44 +00:00
Imre Kaloz	94055a90a7	make smp code more similar to upstream SVN-Revision: 27525	2011-07-07 17:17:06 +00:00
Imre Kaloz	42df203852	3.0 is at rc6 now SVN-Revision: 27524	2011-07-07 13:30:41 +00:00
Gabor Juhos	5ad4040c49	ar71xx: build image for the AP121 boards with 4M of flash SVN-Revision: 27523	2011-07-07 13:01:50 +00:00
Gabor Juhos	cdcb10ee42	ar71xx: add separate profiles for the AP121 and AP121-MINI boards SVN-Revision: 27522	2011-07-07 13:01:48 +00:00
Imre Kaloz	b15f8f765a	add support for and switch to XZ compressed kernels on ARM SVN-Revision: 27518	2011-07-07 10:26:16 +00:00
Imre Kaloz	d148dcce05	select the right cpu SVN-Revision: 27517	2011-07-07 10:24:37 +00:00
Florian Fainelli	a3e343b722	fix building of perf for arm on uclibc SVN-Revision: 27514	2011-07-07 09:43:00 +00:00
Florian Fainelli	a4d69536ea	enable support for perf events SVN-Revision: 27512	2011-07-07 09:42:53 +00:00
Florian Fainelli	0cb42cf9a4	enable perf counter support SVN-Revision: 27511	2011-07-07 09:42:50 +00:00
Daniel Dickinson	0d8b0e937d	base-files: diag.sh: added failsafe led definition SVN-Revision: 27502	2011-07-07 03:09:20 +00:00
John Crispin	a674aabe54	get ready for 3.0 SVN-Revision: 27496	2011-07-06 17:27:17 +00:00
Gabor Juhos	abb1ca01a7	ramips: fix buffalo image generation SVN-Revision: 27495	2011-07-06 16:46:33 +00:00
Imre Kaloz	a832965eff	add 3.0 support SVN-Revision: 27493	2011-07-06 13:03:38 +00:00
Imre Kaloz	a00596924b	refresh patches SVN-Revision: 27492	2011-07-06 12:57:51 +00:00
Imre Kaloz	90bd74dd8b	fixup mtd refresh and co. SVN-Revision: 27491	2011-07-06 12:55:21 +00:00
Imre Kaloz	f24764a372	fix myloader patch, thanks KanjiMonster SVN-Revision: 27490	2011-07-06 12:48:17 +00:00
John Crispin	d42f0c9a1b	fixes mtd maps for lantiq easy50712 and easy50601 evalkit. without this patch mini_fo/jffs caused the uboot to be overwritten on firstboot SVN-Revision: 27489	2011-07-06 10:36:56 +00:00
Imre Kaloz	c93b5653bc	we have an up-to-date mach-type file now SVN-Revision: 27486	2011-07-06 10:12:50 +00:00
Imre Kaloz	05790d9cba	replace the cut down machtype with the full one, as we support a lot of not-yet-upstreamed stuff SVN-Revision: 27485	2011-07-06 10:09:15 +00:00
Florian Fainelli	00ad56b73e	move board_HW553 inside the ifdef ..BCM6358 .. endif block SVN-Revision: 27484	2011-07-06 10:00:39 +00:00
Florian Fainelli	965567a320	refresh 2.6.39 geode patches SVN-Revision: 27483	2011-07-06 10:00:05 +00:00
Gabor Juhos	1a4e7153b6	ramips: add diag support for RT-N15 and PWH2004 Also sort the board names alphabetically. SVN-Revision: 27478	2011-07-06 08:05:00 +00:00
Gabor Juhos	d6985f5b46	ramips: use the 'router' LED for diagnostic on the WHR-G300N board SVN-Revision: 27477	2011-07-06 08:04:55 +00:00
Gabor Juhos	2cc346b8e0	ramips: create tftp image for the WHR-G300N board SVN-Revision: 27476	2011-07-06 08:04:54 +00:00
Gabor Juhos	0dc18d8586	ramips: create factory image for the WHR-G300N board SVN-Revision: 27474	2011-07-06 08:04:52 +00:00
Daniel Dickinson	1141165bb9	Makefile: fixed inclusion of kmod-leds-gpio as a module (breaks Image Generator) - the module is built into the kernel. SVN-Revision: 27471	2011-07-06 06:35:24 +00:00
Daniel Dickinson	9dc72505a2	profiles: GW6X00: fixed inclusion of both wl and wlc wireless tools...should be just wlc SVN-Revision: 27470	2011-07-06 06:35:22 +00:00
Imre Kaloz	612a1fcbc4	add some symbols SVN-Revision: 27464	2011-07-05 21:19:57 +00:00
Florian Fainelli	d24fc7ef56	sched_connmark depends on NF_CONNTRACK_MARK (#8976 , #9423 ) SVN-Revision: 27457	2011-07-05 12:40:50 +00:00
Imre Kaloz	c52560302d	add missing symbols SVN-Revision: 27454	2011-07-05 11:55:31 +00:00
Florian Fainelli	7c3bbe150a	hw553: fix missing has_uart0 in board definition (#9533 ) SVN-Revision: 27448	2011-07-04 15:04:58 +00:00
Gabor Juhos	89f6b29feb	ar71xx: fix building of squashfs images SVN-Revision: 27446	2011-07-04 12:10:03 +00:00
John Crispin	29653782a9	set DEFAULT_SUBTARGET for lantiq/ SVN-Revision: 27445	2011-07-04 11:21:47 +00:00
John Crispin	04fefa4a28	fix broken falcon patches from last night SVN-Revision: 27441	2011-07-04 07:50:34 +00:00
Gabor Juhos	e9c8218375	ramips: create factory image for DIR-300-B1 SVN-Revision: 27439	2011-07-04 06:48:45 +00:00
Felix Fietkau	7afed2d86c	ar71xx: add wzr-hp-ag300h sysupgrade support (patch from #9650 ) SVN-Revision: 27434	2011-07-04 03:03:34 +00:00
John Crispin	cd8166f3fd	AT91: flexibity: add system uci file SVN-Revision: 27413	2011-07-03 18:55:57 +00:00
John Crispin	349e97f879	AT91: Add flexibity board support The patch below adds AT91 Flexibity Connect board support. Signed-off-by: Maxim Osipov <maxim.osipov@gmail.com> SVN-Revision: 27412	2011-07-03 18:51:59 +00:00
John Crispin	2975f0aaf1	alix2: add/subtract features as needed Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> SVN-Revision: 27411	2011-07-03 17:39:24 +00:00
John Crispin	0a8430bfab	use netif_receive_skb on lantiq Signed-off-by: Luca Olivetti <luca@ventoso.org> SVN-Revision: 27410	2011-07-03 17:39:05 +00:00
John Crispin	058eca0b3b	automatic subtarget enumaration SVN-Revision: 27407	2011-07-03 17:38:23 +00:00
John Crispin	43771202d3	update lantiq/falcon patches SVN-Revision: 27406	2011-07-03 17:38:11 +00:00
John Crispin	d43cbe24a5	fix description for lantiq target SVN-Revision: 27405	2011-07-03 17:37:57 +00:00
Gabor Juhos	6e7b802297	ramips: merge 2.6.39 patches SVN-Revision: 27399	2011-07-03 15:02:10 +00:00
Gabor Juhos	646f64d389	ramips: remove 2.6.37 stuff SVN-Revision: 27398	2011-07-03 15:02:09 +00:00
Gabor Juhos	2fc6be00f4	ramips: switch to 2.6.39.2 SVN-Revision: 27397	2011-07-03 15:02:07 +00:00
Gabor Juhos	0fde070cf9	ramips: add 2.6.39 support Based on the patches from #9625 SVN-Revision: 27396	2011-07-03 15:02:06 +00:00
Gabor Juhos	c8010517d5	ramips: add hotplug script to extract eeprom for the rt2x00 driver SVN-Revision: 27393	2011-07-03 15:02:01 +00:00
Gabor Juhos	3334d0604e	ramips: specify eeprom file name on RT305X SVN-Revision: 27392	2011-07-03 15:02:00 +00:00
Gabor Juhos	f53cc4c439	ramips: specify eeprom file name on RT288X SVN-Revision: 27391	2011-07-03 15:01:59 +00:00
Gabor Juhos	129217e127	generic: add rt2x00_platform.h SVN-Revision: 27390	2011-07-03 15:01:57 +00:00
Gabor Juhos	521e495f4b	ramips: add all supported boards to lib/ramips.sh SVN-Revision: 27389	2011-07-03 15:01:56 +00:00
Gabor Juhos	6f54df889a	ramips: check the size of the uImage in image generation SVN-Revision: 27388	2011-07-03 15:01:55 +00:00
Gabor Juhos	575a5286c8	ramips: use lowercase partiion names on the WCR150GN board SVN-Revision: 27387	2011-07-03 15:01:53 +00:00
Gabor Juhos	31facf0b75	ramips: use different partition names in the DIR-300-B1 image SVN-Revision: 27386	2011-07-03 15:01:52 +00:00
Gabor Juhos	dbe55f08f0	ramips: force word write on flashes with AMD cmdset (#9252 ) SVN-Revision: 27385	2011-07-03 15:01:51 +00:00
Gabor Juhos	f1cf43d468	ramips: update partition map for DIR-300-B1 Patch by Layne Edwards from #9252. SVN-Revision: 27384	2011-07-03 15:01:49 +00:00
Gabor Juhos	641c87b127	ramips: consistently use 'firmware' name for sysupgrade partitions SVN-Revision: 27383	2011-07-03 15:01:48 +00:00
Gabor Juhos	381d7f05af	ramips: fix a section mismatch warning SVN-Revision: 27382	2011-07-03 15:01:46 +00:00
Gabor Juhos	16ad91d69f	ramips: remove unused include from the common GPIO code SVN-Revision: 27381	2011-07-03 15:01:44 +00:00
Gabor Juhos	c9f3e7082f	ramips: disable watchdog on sysupgrade SVN-Revision: 27380	2011-07-03 15:01:43 +00:00
Gabor Juhos	e70e6f6848	ramips: swap target check in image generation SVN-Revision: 27379	2011-07-03 15:01:42 +00:00
Gabor Juhos	affb57ee27	ramips: update HW550-3G mtd partitions This patch updates the mtd partitions for the Aztech HW550-3G Signed-off-by: Layne Edwards <ledwards@astrumtech.net> SVN-Revision: 27378	2011-07-03 15:01:41 +00:00
Gabor Juhos	3099ffe414	ramips: set cp0_perfcount_irq for RT305X SVN-Revision: 27377	2011-07-03 15:01:40 +00:00
Daniel Dickinson	f9f3ddebe8	target/patches: This has been sent upstream, but might not appear for a couple of weeks. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> SVN-Revision: 27373	2011-07-03 03:20:04 +00:00
Daniel Dickinson	b0cc0067f9	target/patches: Like the earlier mfgpt patch, the new GPIO drivers also require the MFD driver to be present for the BAR's to be mapped. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> SVN-Revision: 27371	2011-07-03 03:14:53 +00:00
Daniel Dickinson	f2d749ee15	Revert "Like the earlier mfgpt patch, the new GPIO drivers also require the MFD driver to be present for the BAR's to be mapped." This reverts commit c485487b63d1c1de72a375f1278d8a98546ba3af. SVN-Revision: 27370	2011-07-03 03:14:51 +00:00
Daniel Dickinson	209a776f22	Like the earlier mfgpt patch, the new GPIO drivers also require the MFD driver to be present for the BAR's to be mapped. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> SVN-Revision: 27369	2011-07-03 03:14:48 +00:00
Daniel Dickinson	88dcf8629d	The Geode CS5535 and CS5536 companion chips are backward compatible with the SCx200 I2C drivers. Include this on Geos. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> SVN-Revision: 27368	2011-07-03 02:59:00 +00:00
Gabor Juhos	b3a89652a5	ar71xx: use 4k image only for the AP121 board Create optimized 64K images with the new padjffs2 tool and use that images instead of the 4k ones. The 4k images causes problems on devices where the flash erase size is 64 KB. SVN-Revision: 27357	2011-07-02 08:37:59 +00:00
Imre Kaloz	ea8440f4c3	cns21xx belongs to the Econa family, too SVN-Revision: 27354	2011-07-02 08:31:25 +00:00
Imre Kaloz	535cae8393	mark it broken SVN-Revision: 27349	2011-07-02 07:26:04 +00:00
Jo-Philipp Wich	701543d3ef	revert r27043 (#9513 ) SVN-Revision: 27343	2011-07-01 19:52:57 +00:00
Jo-Philipp Wich	1edef5ec98	revert r27341, it introduce wrong behaviour for other models SVN-Revision: 27342	2011-07-01 19:15:45 +00:00
Jo-Philipp Wich	3b3103b2f1	turn status LED off if device finished initializing SVN-Revision: 27341	2011-07-01 18:39:53 +00:00
Imre Kaloz	0ba94475c9	upgrade avr32 u-boot to 2011.06 SVN-Revision: 27330	2011-07-01 11:32:01 +00:00
Imre Kaloz	84c89fb02d	upgrade to 2.6.39.2 SVN-Revision: 27329	2011-07-01 11:31:08 +00:00
Imre Kaloz	b655c7c85a	preliminary 3.0 support SVN-Revision: 27328	2011-07-01 08:15:48 +00:00
Imre Kaloz	8222c7bb24	add missing kernel symbols SVN-Revision: 27327	2011-07-01 08:11:16 +00:00
Felix Fietkau	a41f80bca1	fix the gpio_dev driver: remove existing forward port patches, use unlocked_ioctl on all platforms and fix the arguments to the ioctl handler (based on patch from #9198 ) SVN-Revision: 27322	2011-07-01 03:20:13 +00:00
Gabor Juhos	f9e4619b97	ar71xx: remove CONFIG_MTD_CONCAT ifdefs from the WZR-HP-AG300H code The config option has been removed in 2.6.39. SVN-Revision: 27320	2011-06-30 12:15:33 +00:00
Hauke Mehrtens	8976fa2622	brcm47xx: deactivate wndr3400 for now as this device will not boot SVN-Revision: 27316	2011-06-29 17:42:34 +00:00
Gabor Juhos	d98476c6bd	ar71xx: merge 2.6.39 patches Also remove the old UART driver for ar933x. SVN-Revision: 27314	2011-06-29 08:57:37 +00:00
Gabor Juhos	74a88749f3	ar71xx: remove 2.6.37 support as well SVN-Revision: 27313	2011-06-29 08:57:36 +00:00
Gabor Juhos	1d5378f588	ar71xx: remove 2.6.38 support SVN-Revision: 27312	2011-06-29 08:57:34 +00:00
Gabor Juhos	36e7a8b33e	ar71xx: switch to 2.6.39 SVN-Revision: 27311	2011-06-29 08:57:33 +00:00
Gabor Juhos	6627574e57	ar71xx: add 2.6.39 support SVN-Revision: 27310	2011-06-29 08:57:32 +00:00
Gabor Juhos	1e138098cd	ar71xx: remove ar71xx_gpio_irq_set_type SVN-Revision: 27309	2011-06-29 08:57:30 +00:00
Gabor Juhos	055e317ed8	ar71xx: add separate handlers for IP3 interrupts SVN-Revision: 27308	2011-06-29 08:57:29 +00:00
Gabor Juhos	59bff8bf18	ar71xx: use separate handlers for IP2 interrupts SVN-Revision: 27307	2011-06-29 08:57:28 +00:00
Gabor Juhos	9d6af600e1	ar71xx: remove useless irq_desc.status initializations SVN-Revision: 27306	2011-06-29 08:57:27 +00:00
Gabor Juhos	01ac07c9b3	generic: add MTD_NAND_ECC_BCH symbol for 2.6.39/3.0 SVN-Revision: 27305	2011-06-29 08:57:25 +00:00
Hauke Mehrtens	8c62c5d109	brcm47xx: generate image to flash on Netgear WNDR3400. The image will not boot because serial flash support is missing this is only for experts. SVN-Revision: 27302	2011-06-28 22:23:21 +00:00
Hauke Mehrtens	4c18da3df6	brcm47xx: add initial support for devices with bcma bus. Ethernet and wifi are not working and this is highly experimental. SVN-Revision: 27301	2011-06-28 22:21:57 +00:00
Hauke Mehrtens	3f0eed15a2	kernel: refresh patches for kernel 3.0-rc5 SVN-Revision: 27300	2011-06-28 20:25:39 +00:00
Hauke Mehrtens	2af4f6f634	kernel: update ssb and bcma to linux-next next-20110628 SVN-Revision: 27299	2011-06-28 19:33:50 +00:00
Hauke Mehrtens	c5821c1a3a	kernel: update kernel to 2.6.39.2 SVN-Revision: 27298	2011-06-28 19:30:58 +00:00
Imre Kaloz	e80ebb769f	ethernet cleanup and sata fix - thanks, Chris SVN-Revision: 27297	2011-06-28 06:54:20 +00:00
Hauke Mehrtens	4c392185a6	brcm47xx: update kernel to version 2.6.39 SVN-Revision: 27296	2011-06-27 21:29:20 +00:00
Hauke Mehrtens	ca979845cc	kernel: update ssb and bcma to linux-next next-20110627 SVN-Revision: 27295	2011-06-27 21:28:40 +00:00
Hauke Mehrtens	e439de144f	brcm47xx: fix Linux-3.0 and fix clock rate detection. SVN-Revision: 27294	2011-06-27 20:20:11 +00:00
Hauke Mehrtens	c1873c46b8	kernel: update ssb and bcma to linux-next next-20110627 SVN-Revision: 27293	2011-06-27 20:18:49 +00:00
Jo-Philipp Wich	2c6bd71767	remove remaining uci-defaults SVN-Revision: 27291	2011-06-27 01:42:31 +00:00
Florian Fainelli	9f63b7326f	geos: deprecate uci-defaults files Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com> SVN-Revision: 27287	2011-06-25 22:05:10 +00:00
Florian Fainelli	1f6047496e	alix2: add config files for bridging Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com> SVN-Revision: 27286	2011-06-25 22:05:05 +00:00
Florian Fainelli	3f40c0f7df	remove gpiodev, prefer sysfs gpio SVN-Revision: 27284	2011-06-25 19:26:17 +00:00
Felix Fietkau	cc56af716c	ar71xx: add default network config for wzr-hp-ag300h (based on a patch from #9607 ) SVN-Revision: 27283	2011-06-25 13:54:42 +00:00
Felix Fietkau	ed7f41792a	ar71xx: bring up secondary radio on wzr-hp-ag300h (fixes #9608 ) SVN-Revision: 27282	2011-06-25 13:48:47 +00:00
Florian Fainelli	85d29f3cd0	add missing linux-3.0 config symbol SVN-Revision: 27269	2011-06-24 11:43:30 +00:00
Florian Fainelli	f6e4eb15bc	register SSB sprom after ethernet devices In case the MAC address pool is not big enough to also register a SSB SPROM prefer registering the Ethernet devices. SVN-Revision: 27258	2011-06-22 12:32:03 +00:00
Florian Fainelli	5a76c6bdd7	fix tab damage in 141-led_count.patch SVN-Revision: 27254	2011-06-21 20:52:58 +00:00
Florian Fainelli	3f0f8d9c87	fix and make usable kmod-pcmcia-rsrc This module is also needed for e.g: kmod-bcm63xx-pcmcia SVN-Revision: 27253	2011-06-21 20:52:53 +00:00
Hauke Mehrtens	1c0d5f5ae2	kernel: refresh patches for kernel 3.0-rc4 SVN-Revision: 27247	2011-06-21 18:39:47 +00:00
Florian Fainelli	9bdf6abb9d	use macros to generate SPI registers table and switches SVN-Revision: 27246	2011-06-21 10:05:51 +00:00
Florian Fainelli	6cb3195b40	fix usb mis-cleanup after r27162 (#9581 ) SVN-Revision: 27243	2011-06-20 10:04:53 +00:00
Jo-Philipp Wich	70fb318a90	Restrict Soekris specific base-files handling to Soekris profiles, based on patch by Philip Prindeville <philipp@redfish-solutions.com> SVN-Revision: 27241	2011-06-19 23:05:21 +00:00
Jo-Philipp Wich	9cd64fa754	generic: Remove IPv6 depependency of bridge in 2.6.38+ Since 2.6.38 the bridge module has a dependency to IPv6 if IPv6 is enabled. Since the IPv6 module isn't exactly lightweight and bridge also only needs a single function from IPv6, it's rather easy to create a common "lib" module with a RCU pointer to the actual implementation, if the IPv6 module is loaded (although slightly hackish). The codepath seems to be only taken when using IPv6, so there should be no negative side effects when IPv6 isn't loaded. I did not measure how big the performance impact is. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 27237	2011-06-19 22:48:53 +00:00
Florian Fainelli	ab74628c10	dev-spi.c checks for running CPU, not board code SVN-Revision: 27236	2011-06-19 20:46:00 +00:00
Florian Fainelli	4dd4cbeb43	fixup patches after r27234 SVN-Revision: 27235	2011-06-19 20:28:38 +00:00
Florian Fainelli	7819b530da	remove accidental bcm6345 related patches SVN-Revision: 27234	2011-06-19 20:16:59 +00:00
Florian Fainelli	12db3df666	remove support for 2.6.37 and 2.6.38 SVN-Revision: 27233	2011-06-19 20:14:22 +00:00
Florian Fainelli	6bb0a608dc	switch to 2.6.39 SVN-Revision: 27232	2011-06-19 20:12:45 +00:00
Florian Fainelli	bcada2640b	remove 2.6.35 and 2.6.32 support SVN-Revision: 27230	2011-06-19 20:09:40 +00:00
Florian Fainelli	67d0ca0b4b	remove pre 2.6.39 patches and config SVN-Revision: 27229	2011-06-19 20:09:00 +00:00
Florian Fainelli	34db3f9f86	remove 2.6.37 patches and config SVN-Revision: 27228	2011-06-19 20:07:26 +00:00
Gabor Juhos	e6af77a1c8	ar71xx: cleanup AR933X UART driver SVN-Revision: 27222	2011-06-19 13:17:51 +00:00
Gabor Juhos	066e04d497	ar71xx: fix uart clock frequency for AR933X SVN-Revision: 27221	2011-06-19 13:17:50 +00:00
Hauke Mehrtens	47e218c426	brcm47xx: refresh patches SVN-Revision: 27219	2011-06-18 15:53:14 +00:00
Hauke Mehrtens	79a7343560	kernel: update to kernel 2.6.38.8 SVN-Revision: 27218	2011-06-18 15:52:15 +00:00
Hauke Mehrtens	75f9e0c615	brcm47xx: add support for kernel 3.0 SVN-Revision: 27217	2011-06-18 15:24:44 +00:00
Rod Whitby	710409740e	ixp4xx: Removed kmod-madwifi from the NSLU2 profile, as the NSLU2 has not wifi capability out of the box. SVN-Revision: 27202	2011-06-17 11:22:22 +00:00
Florian Fainelli	b97459eb88	add missing USBIP_CORE item in config-3.0 SVN-Revision: 27195	2011-06-16 14:34:50 +00:00
Florian Fainelli	540b838998	allow any console to be used SVN-Revision: 27193	2011-06-16 14:34:44 +00:00
Florian Fainelli	426dccd019	bcm63xx: Add support for Linux 3.0-rc3 Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 27192	2011-06-16 14:34:40 +00:00
Hauke Mehrtens	235e331987	linux/generic: Add support for 3.0-rc3 Also make linux identify itself properly as 3.0, not 3.0.0. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 27191	2011-06-15 21:31:01 +00:00
Hauke Mehrtens	bf64ac730a	bcm47xx: Remove kernel checks from image Makefile 2.4 isn't present anymore, so it will always be 2.6 (or newer). Since the 2.6 check will break with 3.0, remove it alltogether. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 27185	2011-06-15 21:11:49 +00:00
Jo-Philipp Wich	5752efdadd	2.6.39.1: missing kernel symbols If you turn on I2C, you'll need this symbol defined. Signed-off-by: Philip A. Prindeville <philipp@redfish-solutions.com> SVN-Revision: 27182	2011-06-15 18:18:32 +00:00
Felix Fietkau	dcddcfca24	add missing kernel config symbols for usb on powerpc SVN-Revision: 27181	2011-06-15 18:07:26 +00:00
Jo-Philipp Wich	d39379296c	backport upstream Kernel commit 1ed2f73d90fb49bcf5704aee7e9084adb882bfc5 (netfilter: IPv6: fix DSCP mangle code) SVN-Revision: 27179	2011-06-15 14:11:33 +00:00
Jo-Philipp Wich	14913ab8b0	revert r26997, it does not apply against 2.6.36.4 SVN-Revision: 27178	2011-06-15 13:51:57 +00:00
Florian Fainelli	685a61eb6c	switch to 2.6.39 SVN-Revision: 27175	2011-06-14 20:05:13 +00:00
Florian Fainelli	0fb8884efe	fix diag.sh with qube2 front led SVN-Revision: 27174	2011-06-14 20:05:09 +00:00
Florian Fainelli	dee0010ae2	resync kernel config SVN-Revision: 27173	2011-06-14 20:05:03 +00:00
John Crispin	0732b2db78	Fix for bug where the iniatialisation of the MAC data private strucure is copied into the wrong location. Ticket #9547 Signed-off-by: Conor O'Gorman <conor at dna.ie> SVN-Revision: 27172	2011-06-13 22:37:23 +00:00
Florian Fainelli	7a96525a6f	replace unfortify patch with a better one Thanks to Richard Weinberger for providing this patch SVN-Revision: 27168	2011-06-13 12:45:12 +00:00
Gabor Juhos	b7e016ba42	ar71xx: use ar933x_uart.h in the AR933X serial driver SVN-Revision: 27166	2011-06-13 08:12:40 +00:00
Gabor Juhos	b58ede16a5	ar71xx: update early_printk code SVN-Revision: 27165	2011-06-13 08:12:38 +00:00
Florian Fainelli	6a5112a750	cleanup files using checkpatch.pl SVN-Revision: 27162	2011-06-12 19:17:57 +00:00
John Crispin	fa59bb0958	* move patches around * add basic support for gigaset sx76x SVN-Revision: 27158	2011-06-12 08:56:26 +00:00
Vasilis Tsiligiannis	70106f153d	Remove trailing spaces, convert spaces to tabs SVN-Revision: 27153	2011-06-09 19:30:50 +00:00
John Crispin	e3e2a170cd	we dont need 1024 bytes buffer. 128 bytes is enough. SVN-Revision: 27143	2011-06-09 07:08:54 +00:00
John Crispin	8329ecf92c	* revert accidental config change SVN-Revision: 27142	2011-06-09 05:10:18 +00:00
John Crispin	ed0e649a5b	* fixes spi flash for ar9 * adds limited support for netgear dgn3500 (enough for others to start working with) SVN-Revision: 27137	2011-06-08 17:57:55 +00:00
Felix Fietkau	9160e06af5	ar71xx: override inittab to enable login on ttyATH0 SVN-Revision: 27128	2011-06-07 17:07:10 +00:00
Florian Fainelli	e7b6721f4e	update to 2.6.39.1 SVN-Revision: 27114	2011-06-04 18:27:14 +00:00
Florian Fainelli	d97f50b69b	define UIMAGE for various rootfs targets SVN-Revision: 27113	2011-06-04 18:27:09 +00:00
Florian Fainelli	429745edd6	use IMG_PREFIX for image name SVN-Revision: 27112	2011-06-04 18:27:04 +00:00
Florian Fainelli	4aaf590909	add more config symbols to 2.6.39 SVN-Revision: 27111	2011-06-04 18:27:00 +00:00
Florian Fainelli	89dd8aed1f	update to 2.6.39.1 SVN-Revision: 27110	2011-06-04 18:26:54 +00:00
Florian Fainelli	72996d2dcb	update to 2.6.39.1 SVN-Revision: 27107	2011-06-04 13:36:09 +00:00
Florian Fainelli	20c0427132	update to 2.6.39.1 SVN-Revision: 27106	2011-06-04 13:36:05 +00:00
Florian Fainelli	de2e05b6f2	add some missing 2.6.39 config symbols SVN-Revision: 27105	2011-06-04 13:36:00 +00:00
Florian Fainelli	763b58c30c	update to 2.6.39.1 patch from Peter Wagner SVN-Revision: 27104	2011-06-04 13:35:55 +00:00
Gabor Juhos	13363d9129	ar71xx: setup wdt_clock for AR913X to avoid a kernel bug Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 27102	2011-06-04 12:30:10 +00:00
Gabor Juhos	ae2cbfa1e8	ar71xx: select the internal antenna by default on the ZCN-1523H boards SVN-Revision: 27101	2011-06-04 12:30:09 +00:00
Florian Fainelli	0de25d1263	update to 2.6.39 SVN-Revision: 27090	2011-06-02 13:45:20 +00:00
Felix Fietkau	31dd60689e	Revert "ar71xx: only enable the rx engine after the link is up..." It messes up the DMA state when the link goes down SVN-Revision: 27088	2011-06-01 18:15:43 +00:00
Gabor Juhos	750af1522b	ar71xx: init external_reset for AR933X SVN-Revision: 27083	2011-06-01 13:12:30 +00:00
Gabor Juhos	af4cae4498	ar71xx: add external_reset field to ath9k_platform_data SVN-Revision: 27082	2011-06-01 13:12:28 +00:00
Gabor Juhos	f0c7b93e5d	ar71xx: init get_mac_revision on AR9330 rev 1 SVN-Revision: 27081	2011-06-01 13:12:27 +00:00
Gabor Juhos	1a54e33c17	ar71xx: add get_mac_revision to ath9k_platform_data SVN-Revision: 27080	2011-06-01 13:12:26 +00:00
Gabor Juhos	34ff32a6eb	ar71xx: export SoC revision SVN-Revision: 27079	2011-06-01 13:12:24 +00:00
Imre Kaloz	2440175978	refresh patches SVN-Revision: 27078	2011-06-01 07:24:41 +00:00
Imre Kaloz	aafa838d77	fixup second led, patch from Chris SVN-Revision: 27077	2011-06-01 07:21:25 +00:00
Felix Fietkau	86dbc3a02d	ar71xx: add profile and image building code for wzr-hp-ag300h SVN-Revision: 27076	2011-06-01 02:23:30 +00:00
Felix Fietkau	4f06b8263a	ar71xx: add kernel support for the buffalo wzr-hp-ag300h SVN-Revision: 27075	2011-06-01 02:23:26 +00:00
Felix Fietkau	56dd5c4388	fix a crash in mtd_concat when the .sync op is not implemented SVN-Revision: 27074	2011-06-01 02:23:22 +00:00
Felix Fietkau	628cb35179	m25p80: add the chip id for the winbond w25q128 chip SVN-Revision: 27073	2011-06-01 02:23:18 +00:00
Imre Kaloz	acbb2db5e2	fixup pcie clock, thanks Chris SVN-Revision: 27072	2011-05-31 23:55:33 +00:00
Gabor Juhos	33fdc21d40	ar71xx: build images for the AP121 boards SVN-Revision: 27070	2011-05-31 22:53:47 +00:00
Gabor Juhos	9e435c03e0	ar71xx: add sysupgrade support for the AP121 boards SVN-Revision: 27069	2011-05-31 22:53:45 +00:00
Gabor Juhos	646937135f	ar71xx: add default network config for the AP121 boards SVN-Revision: 27068	2011-05-31 22:53:44 +00:00
Gabor Juhos	f332dbd7be	ar71xx: add support for the AP121/AP121-MINI reference boards SVN-Revision: 27067	2011-05-31 22:53:43 +00:00
Gabor Juhos	8beff081eb	ar71xx: register UART for the AR933X SoCs SVN-Revision: 27066	2011-05-31 22:53:42 +00:00
Gabor Juhos	b460bc6f12	ar71xx: add serial driver for the AR933X UART SVN-Revision: 27065	2011-05-31 22:53:40 +00:00
Gabor Juhos	c34e0cbc4c	ar71xx: add WMAC initialization code for the AR933X SoCs SVN-Revision: 27064	2011-05-31 22:53:39 +00:00
Gabor Juhos	e8a0aaf9a2	ar71xx: add ethernet initialization for the AR933X SoCs SVN-Revision: 27063	2011-05-31 22:53:37 +00:00
Gabor Juhos	e0a0f3796a	ar71xx: enable USB support for the AR933x SoCs SVN-Revision: 27062	2011-05-31 22:53:36 +00:00
Gabor Juhos	677c80ee17	ar71xx: add AR933x specific glue for ar71xx_device{start,stop} SVN-Revision: 27061	2011-05-31 22:53:35 +00:00
Gabor Juhos	88c45e3130	ar71xx: the watchdog uses the reference clock on the AR933x SoCs SVN-Revision: 27060	2011-05-31 22:53:34 +00:00
Gabor Juhos	7acbacab8c	ar71xx: add AR933x specific glue code for IRQ initialization SVN-Revision: 27059	2011-05-31 22:53:32 +00:00
Gabor Juhos	e6fde61bec	ar71xx: don't register 8250 UART on the AR933x SoCs SVN-Revision: 27058	2011-05-31 22:53:31 +00:00
Gabor Juhos	8f7541a044	ar71xx: enable GPIO support for the AR933x SoCs SVN-Revision: 27057	2011-05-31 22:53:30 +00:00
Gabor Juhos	e11b9c8371	ar71xx: add AR933x specific frequency initialization code SVN-Revision: 27056	2011-05-31 22:53:29 +00:00
Gabor Juhos	0bf4478d37	ar71xx: add AR933x specific early_printk support SVN-Revision: 27055	2011-05-31 22:53:27 +00:00
Gabor Juhos	6b3ca9ef0b	ar71xx: add preliminary support for the Atheros AR933x SoCs SVN-Revision: 27054	2011-05-31 22:53:26 +00:00
Gabor Juhos	761e67b394	ar71xx: stop producing -NA factory images and tag factory images with hd_id for WNDR3700v2 NETGEAR doesnt produce a distinct North American image for WNDR3700v2, they use the same image worldwide. This is a change from earlier models such as WNDR3700 (v1). NETGEAR's v2 images now contain an "hd_id" parameter, as well. All observed WNDR3700v2, WNDR3800, and WNDRMAC images use 29763654+16+64 as their hd_id value. This patch changes the OpenWrt WNDR3700v2 "factory" image generation to stop producing the extraneous -NA version and to tag the image with the same hd_id used in NETGEAR's images. There is no change to WNDR3700 (v1) image generation, as NETGEAR continues to produce distinct -NA and worldwide images, neither of which are tagged with hd_id. Signed-off-by: Mark Mentovai <mark@moxienet.com> SVN-Revision: 27053	2011-05-31 22:53:25 +00:00
Gabor Juhos	c8d182406d	ar71xx: create factory images for the WZR-HP-G30{0,1}NH boards SVN-Revision: 27051	2011-05-31 22:53:22 +00:00
Gabor Juhos	0677e16248	ar71xx: Fix header offset for newer WRT160NL models Newer WRT160NLs have a flash chip with 4K erase blocks instead of 64K, resulting in miscalculated partition sizes. Since the actual sizes did not change, hardcode them to their current sizes, and make sure they are at least one erase block big (in case Cisco decides to start to use chips with 128K erase blocks). Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 27049	2011-05-31 22:53:20 +00:00
Gabor Juhos	be97e2a043	ar71xx: add SOC_AR{71XX,724X,913X,934X} config symbols SVN-Revision: 27048	2011-05-31 22:53:19 +00:00
Gabor Juhos	ea2f6d0edf	ar71xx: reduce the size of the squashfs-4k binaries SVN-Revision: 27047	2011-05-31 22:53:18 +00:00
Gabor Juhos	5d5f72415e	ar71xx: initialize is_clk_25mhz field for AR9340 WMAC SVN-Revision: 27045	2011-05-31 22:53:15 +00:00
Gabor Juhos	f7b3c3dfd1	ar71xx: sync ath9k_platform_data.h with compat-wireless SVN-Revision: 27044	2011-05-31 22:53:14 +00:00
Gabor Juhos	650c7cc2fd	ar71xx: use the diag LED for diagnostic on the WZR-HP-G30XNH boards SVN-Revision: 27043	2011-05-31 22:53:13 +00:00
Gabor Juhos	4834fdaccd	ar71xx: fix uci-defaults script for the WZR-HP-G30XNH boards SVN-Revision: 27042	2011-05-31 22:53:12 +00:00
Gabor Juhos	60d5abbc27	ar71xx: ag71xx: make ring sizes configurable via ethtool SVN-Revision: 27041	2011-05-31 22:53:10 +00:00
Gabor Juhos	7a2651f633	ar71xx: ag71xx: prepare to make ring sizes configurable SVN-Revision: 27040	2011-05-31 22:53:09 +00:00
Gabor Juhos	669aba3871	ar71xx: ag71xx: nuke unused AG71XX_TX_FIFO_LEN define Reported-by: Dave Täht <dave.taht@gmail.com> SVN-Revision: 27039	2011-05-31 22:53:07 +00:00
Felix Fietkau	9567b93e5c	x86: add additional companion chip drivers to alix2 and geos Add the MFGPT high precision timers, and integration into the schedule (clock events). Use OHCI, not UHCI usb module. Remove VIA SATA driver from Alix2... that was accidentally cloned from net5501 platform. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> SVN-Revision: 27038	2011-05-31 16:57:05 +00:00
Felix Fietkau	68af223efe	x86: remove pata-amd driver from generic x86 images, add addition cs553x modules The pata-cs5535/pata-cs5536 driver is actually fairly rare: it only gets used on embedded platforms. Therefore, we remove it from the generic x86 configuration. Also, add definitions for other useful geode modules (high-res timers, MFGPT timers, etc). Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> SVN-Revision: 27037	2011-05-31 16:57:01 +00:00
Mirko Vogt	ba5b3ece5d	purge out CONFIG_CRYPTO* symbols out of target specific kernel configs since OpenWrt is taking care of them SVN-Revision: 27036	2011-05-31 09:47:30 +00:00
Felix Fietkau	2b5402d128	ar71xx: only enable the rx engine after the link is up, fixes a race condition that got rx stuck when the interface is brought up during lots of inbound traffic (thx, matteo) SVN-Revision: 27035	2011-05-30 23:08:01 +00:00
Felix Fietkau	0ebc93831f	ar71xx: disable flow control for ar724x, it can get stuck in a loop of continously sending MAC pause frames SVN-Revision: 27034	2011-05-30 23:07:57 +00:00
Imre Kaloz	f738ca7b9c	upgrade to 2.6.39 SVN-Revision: 27030	2011-05-30 13:55:34 +00:00
John Crispin	6608f419d1	* backport 2.6.8 patches to .39 / .32.33 * remove lqtapi * bump tapi/dsl to .39 * migrate to new ltq_ style api * add amazon_se support SVN-Revision: 27026	2011-05-29 21:19:26 +00:00
Florian Fainelli	016e8dee34	bcm63xx: Add support for 2.6.39 Add support for Kernel 2.6.39. Boots fine on a BCM6358. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 27019	2011-05-27 09:54:52 +00:00
Florian Fainelli	590c82cec1	bcm63xx: Add support for 2.6.38 Add support for Kernel 2.6.38, based on 2.6.38.6. Boots fine on a BCM6358. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 27018	2011-05-27 09:54:48 +00:00
Florian Fainelli	68cb138154	fold 446-board-D4PW_correction.patch in 440-board-D4PW.patch SVN-Revision: 27014	2011-05-26 13:53:00 +00:00
Florian Fainelli	762885081a	renumber patches accordingly SVN-Revision: 27013	2011-05-26 13:52:56 +00:00
Florian Fainelli	2785e3fc12	renumber board patches SVN-Revision: 27012	2011-05-26 12:09:15 +00:00
Hauke Mehrtens	6f7ae75ffa	kernel: exportfs: reallow building as a module It was originally tristate, but was changed to bool to prevent a build breakage in an earlier patch revision (for a new syscall). The actual commit[1] changed it in a way this isn't needed anymore, but accidentially left the EXPORTFS change in. There's no reason for it not being buildable as a module, so changing it back to tristate is fine. see: https://patchwork.kernel.org/patch/812832/ Thank you Jonas Gorski for the patch. SVN-Revision: 27011	2011-05-25 20:57:13 +00:00
Hauke Mehrtens	6769216a64	kernel: generic: Update 2.6.39 to final * Add missing config symbols * Update package/kernel for 2.6.39 CONFIG_BT_L2CAP=y and CONFIG_BT_SCO=y are set to build them into the bluetooth module. Thank you Jonas Gorski for the patch SVN-Revision: 27010	2011-05-25 19:51:40 +00:00
Hauke Mehrtens	c69f2d8788	kernel: some updates for kernel 2.6.39 * add md5sum for kernel * add some missing config symbols * add some ssb patches to make compat-wireless compile Thank you Peter Wagner for the patch SVN-Revision: 27009	2011-05-25 19:32:00 +00:00
Hauke Mehrtens	8137e35a5d	brcm47xx: initial 2.6.39 support for brcm47xx Thank you Peter Wagner for the patch SVN-Revision: 27008	2011-05-25 19:27:08 +00:00
Florian Fainelli	fad3f46f0d	fix mtd warnings Fixes for the following warnings: drivers/mtd/devices/block2mtd.c: In function '_open_bdev': drivers/mtd/devices/block2mtd.c:272:3: warning: ISO C90 forbids mixed declarations and code drivers/mtd/devices/block2mtd.c: In function 'add_device': drivers/mtd/devices/block2mtd.c:399:13: warning: assignment discards qualifiers from pointer target type In the case of 442-block2mtd_probe.patch, it's not until the insertion of a executable statement before the definition that causes a warning, so I've chosen to resolve the issue here by splitting the definition and the initialization into a definition and a statement (and assignment) instead. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> SVN-Revision: 27007	2011-05-25 19:16:58 +00:00
Hauke Mehrtens	f5f989e3fb	brcm47xx: remove old kernel SVN-Revision: 27006	2011-05-25 18:05:54 +00:00
Hauke Mehrtens	06166b01dd	brcm47xx: fix partition layout on SimpleShare devices. The flash driver code should be cleaned up and the broad detection code should be placed into arch code and used here. This fixes #9323 Thank you Will Holmes for the patch. SVN-Revision: 27005	2011-05-25 17:46:34 +00:00
Hamish Guthrie	50d2a84a21	Clean up patch not applying SVN-Revision: 26997	2011-05-24 10:00:36 +00:00
Florian Fainelli	16dfe8b4d1	add support for BT Voyager 2110 (#8810 ) Signed-off-by: Jonathan McCrohan <jmccrohan@gmail.com> SVN-Revision: 26959	2011-05-20 10:06:25 +00:00
Florian Fainelli	6c8387fe15	add support for DSL-2640B rev B2 Signed-off-by: Adrian Feliks <mexit@o2.pl> SVN-Revision: 26958	2011-05-20 10:06:22 +00:00
Florian Fainelli	031ea08ef0	refresh patches SVN-Revision: 26957	2011-05-20 10:06:18 +00:00
Florian Fainelli	3e83f60a66	add support for D-Link DVA-G3810BN/TL This patch adds support for D-Link's DVA-G3810BN/TL product. Signed-off-by: Roman Dumycz <roman@secureas.com> SVN-Revision: 26956	2011-05-20 10:06:15 +00:00
Florian Fainelli	f9f8dcfa70	refresh 2.6.37 patches SVN-Revision: 26955	2011-05-20 10:06:11 +00:00
Florian Fainelli	f0a99c1692	add support for BT Voyager 2500 (#9070 ) SVN-Revision: 26954	2011-05-20 10:06:07 +00:00
Florian Fainelli	acf0ec224f	add support for USR9108 LEDs (#9372 ) SVN-Revision: 26953	2011-05-20 10:06:04 +00:00
Florian Fainelli	58b5a2ca7b	add GT701 LEDs support (#9382 ) SVN-Revision: 26952	2011-05-20 10:06:00 +00:00
Daniel Dickinson	f2c86a3835	Simple typo for kmod- prefix in alix2 target makefile. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> SVN-Revision: 26945	2011-05-19 04:29:40 +00:00

... 13 14 15 16 17 ...

8135 Commits (5d9b44d1109f82db715078d66f603a1628f9ecb9)