Commit Graph

10784 Commits (2b0cb17d4298c9dced24ca30c5b68ce10d64c366)

Author SHA1 Message Date
Gabor Juhos 257bfc21af ar71xx: add profile support for dir-835-a1
Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at>
Patchwork: http://patchwork.openwrt.org/patch/3427/mbox/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35959
2013-03-11 15:55:17 +00:00
Gabor Juhos 3fa3cbae7c ar71xx: add user space support for dir-835-a1
Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at>
Patchwork: http://patchwork.openwrt.org/patch/3425/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35958
2013-03-11 15:55:15 +00:00
Gabor Juhos a7525f5f5d ar71xx: add kernel support for dir-835-a1
[juhosg:
  - remove custom mdio bus info and platform data for ar8327, clear the
    .led_cfg field from dir835a1_setup instead,
  - remove arguments of dir835c1_generic_setup function, register the
    LEDs directly from the board specific setup instead]

Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at>
Patchwork: http://patchwork.openwrt.org/patch/3426/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35957
2013-03-11 15:55:13 +00:00
Felix Fietkau bd6c9d6252 cns3xxx: ethernet - clean the tx ring before refilling the rx ring to reduce memory pressure
SVN-Revision: 35953
2013-03-11 02:29:53 +00:00
Felix Fietkau d7a529709a cns3xxx: ethernet - clean the tx ring only in the poll function, not in the xmit handler
SVN-Revision: 35952
2013-03-11 02:29:47 +00:00
Felix Fietkau 0d13baff1e cns3xxx: increase number of ethernet driver rx buffers
SVN-Revision: 35951
2013-03-10 21:59:32 +00:00
Felix Fietkau ee2b511e1f cns3xxx: prevent the ethernet driver from accessing uninitialized dma descriptor entries
SVN-Revision: 35950
2013-03-10 21:59:28 +00:00
Felix Fietkau d22ac8d8fb cns3xxx: minor ethernet driver cleanup
SVN-Revision: 35949
2013-03-10 21:59:21 +00:00
Hauke Mehrtens e1f24d99e1 brcm47xx: refresh config
SVN-Revision: 35948
2013-03-10 20:42:26 +00:00
Hauke Mehrtens 89d4fceee2 xburst: fix compilation: remove the __dev attributes
SVN-Revision: 35946
2013-03-10 20:26:28 +00:00
Hauke Mehrtens 45b24fa771 kernel: add some missing config options found by the buildbot.
SVN-Revision: 35945
2013-03-10 20:25:19 +00:00
Felix Fietkau 9facda9570 cns3xxx: use kmalloc instead of kzalloc for ethernet rx buffers
SVN-Revision: 35943
2013-03-10 18:25:20 +00:00
Felix Fietkau c44506fcbd cns3xxx: fix an rx irq handling corner case
When an rx interrupt comes in, rx interrupts are disabled and NAPI
polling is scheduled. During the NAPI poll, the driver first processes
received frames in the ring, then fills the dma descriptor slots with
new buffers and calls tx complete, before finally re-enabling rx
interrupts and completing NAPI (if below the budget).
If the hardware rx queue overflows before the napi complete is called,
the hardware will not throw any further rx interrupts and rx processing
stops completely.
Fix this by keeping NAPI polling scheduled until it completes a poll
without receiving any packets, and also handle NAPI completion before
refilling rx or completing tx.

SVN-Revision: 35942
2013-03-10 18:25:16 +00:00
Felix Fietkau c1adc79328 cns3xxx: fix ethernet driver memory barrier usage
SVN-Revision: 35941
2013-03-10 18:25:11 +00:00
Gabor Juhos 9a71711d39 realview: remove 3.3 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35940
2013-03-10 18:06:31 +00:00
Gabor Juhos 35dd42f976 realview: switch to 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35939
2013-03-10 18:06:29 +00:00
Felix Fietkau 53e0f10246 kernel: prevent -f*-sections from leaking into the boot zImage wrapper on arm
SVN-Revision: 35938
2013-03-10 17:04:36 +00:00
Felix Fietkau 2b83c9bd8a kernel: ensure that the arm exception handlers get preserved
SVN-Revision: 35937
2013-03-10 17:04:31 +00:00
Felix Fietkau f0d7ba33ef kernel: use -ffunction-sections, -fdata-sections and --gc-sections on ARM to reduce kernel image size, disable those flags when tracing on MIPS to fix compile errors
SVN-Revision: 35936
2013-03-10 14:51:42 +00:00
Gabor Juhos 5b3ab0e21e xburst: remove 3.3 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35934
2013-03-10 13:24:54 +00:00
Gabor Juhos 00caedf86e xburst: switch to 3.8
Compile tested only, so add broken flag.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35933
2013-03-10 13:24:52 +00:00
Gabor Juhos 8942d4dc04 xburst: add support for 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35932
2013-03-10 13:24:50 +00:00
Gabor Juhos 15718f5387 linux/3.8: add missing config symbols
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35931
2013-03-10 13:24:47 +00:00
Gabor Juhos f25c050aa9 adm5120: remove 3.7 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35930
2013-03-10 13:24:46 +00:00
Gabor Juhos 5502bbe2ca adm5120: switch to 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35929
2013-03-10 13:24:45 +00:00
Gabor Juhos c42da71d8b malta: remove 3.7 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35928
2013-03-10 13:24:44 +00:00
Gabor Juhos 6720fc6952 malta: switch to 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35927
2013-03-10 13:24:43 +00:00
Gabor Juhos 82dc64b19b atheros: remove 3.3 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35926
2013-03-10 13:24:42 +00:00
Gabor Juhos 5b8e106ae6 atheros: switch to 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35925
2013-03-10 13:24:40 +00:00
Gabor Juhos ce5806378e mpc83xx: remove 3.7 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35924
2013-03-10 13:24:39 +00:00
Gabor Juhos c79c132229 mpc83xx: switch to 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35923
2013-03-10 13:24:38 +00:00
Gabor Juhos 27ba973c06 rb532: remove 3.7 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35922
2013-03-10 13:21:40 +00:00
Gabor Juhos 501e4d331d rb532: switch to 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35921
2013-03-10 13:21:33 +00:00
Gabor Juhos 8223205a29 rb532: add support for 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35920
2013-03-10 13:21:29 +00:00
Gabor Juhos e8a5312bef ar71xx: correct board name to make LEDs work on RB750
Patch by: Denver A <denvera@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3419/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35919
2013-03-10 07:20:57 +00:00
Gabor Juhos d85ffaabe9 ppc40x: remove __dev_{in,ex}it annotations
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35918
2013-03-10 07:20:54 +00:00
Felix Fietkau 446409f43e cns3xxx: reduce buffer allocation size to 2048 bytes, improves ethernet performance
SVN-Revision: 35917
2013-03-10 01:27:04 +00:00
Felix Fietkau 95431b7843 cns3xxx: remove linux 3.3 support
SVN-Revision: 35916
2013-03-10 01:01:55 +00:00
Felix Fietkau 3d919b7c08 cns3xxx: disable CONFIG_PROC_STRIPPED and add an init script to set the ethernet cpu affinity (improves lan<->wlan bridging performance)
SVN-Revision: 35915
2013-03-10 01:01:51 +00:00
Hauke Mehrtens 44ed7d664a brcm47xx: add some more partition parser fixes by Rafał Miłecki
SVN-Revision: 35912
2013-03-09 19:48:03 +00:00
Hauke Mehrtens 694050a4cf brcm47xx: netconfig: add bacis support for swconfig
Parse the cpu port from swconfig and explicitly mark the cpu port as tagged.

SVN-Revision: 35911
2013-03-09 19:24:43 +00:00
Felix Fietkau 72af5b4b35 kernel: add a missing config symbol for 3.8
SVN-Revision: 35910
2013-03-09 19:04:37 +00:00
Felix Fietkau 95f14d052a cns3xxx: add linux 3.8 support and use it by default
SVN-Revision: 35908
2013-03-09 18:51:46 +00:00
Felix Fietkau 85348d602e kernel: fix mpcore watchdog symbol export
SVN-Revision: 35907
2013-03-09 18:51:39 +00:00
Gabor Juhos 938361b055 cns21xx: remove 3.7 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35886
2013-03-04 16:08:41 +00:00
Gabor Juhos a61431b154 cns21xx: switch to 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35885
2013-03-04 16:08:39 +00:00
Gabor Juhos 3e3fc552bc ppc44x: remove 3.7 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35884
2013-03-04 15:16:37 +00:00
Gabor Juhos d24041665c ppc44x: switch to 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35883
2013-03-04 15:16:35 +00:00
Gabor Juhos c67127ad23 ppc40x: remove 3.7 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35882
2013-03-04 15:16:33 +00:00
Gabor Juhos 341b5ba939 ppc40x: switch to 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35881
2013-03-04 15:16:32 +00:00
Florian Fainelli b412a81524 brcm63xx: fix LED names for various boards
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35880
2013-03-04 13:42:35 +00:00
Gabor Juhos 947bc9d36f ar71xx: add backported watchdog patches
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35879
2013-03-04 12:08:28 +00:00
Gabor Juhos 1d55249d7c ar71xx: use backported QCA955x patches
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35878
2013-03-04 11:48:15 +00:00
Gabor Juhos 64a9fe2894 ar71xx: use backported PCI patches
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35877
2013-03-04 11:48:08 +00:00
Gabor Juhos 12d49b5195 ar71xx: use backported MISC IRQ patch
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35876
2013-03-04 11:48:06 +00:00
Gabor Juhos 4c31b9f43e ar71xx: use backported GPIO patches
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35875
2013-03-04 11:48:04 +00:00
Luka Perkov 120028af99 ar71xx: enable building ramdisk images for WZRHPG30XNH board types
Signed-off-by: Luka Perkov <luka@openwrt.org>
Acked-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35874
2013-03-04 11:37:28 +00:00
Gabor Juhos 0ad50b0bec ar71xx: use backported SPI patches
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35873
2013-03-04 09:40:44 +00:00
Gabor Juhos c28cdfab31 mpc85xx: remove 3.7 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35872
2013-03-04 09:37:25 +00:00
Gabor Juhos 84e960f7aa mpc85xx: switch to 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35871
2013-03-04 09:37:24 +00:00
Gabor Juhos 3ee484d54c ar71xx: remove 3.7 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35870
2013-03-04 09:03:50 +00:00
Gabor Juhos d5adb0dbdd ar71xx: switch to 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35869
2013-03-04 08:47:38 +00:00
Gabor Juhos a87a96da67 kernel: update linux 3.8 to 3.8.2
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35868
2013-03-04 08:43:55 +00:00
Luka Perkov a5ebfc79ba ar71xx: rework changes from r35840
Signed-off-by: Luka Perkov <luka@openwrt.org>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35865
2013-03-03 21:59:34 +00:00
Gabor Juhos 26fbc15a86 kernel: update linux 3.8 to 3.8.1
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35862
2013-03-03 13:58:52 +00:00
Gabor Juhos da79a4c698 linux/3.8: add missing config symbols
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35861
2013-03-03 13:58:10 +00:00
Gabor Juhos 23b3b3a194 kernel: update linux 3.7 to 3.7.10
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35860
2013-03-03 13:57:40 +00:00
Gabor Juhos 4491da2bd4 ar71xx: update MAC address assignment for dir-825-c1
Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35855
2013-03-03 12:47:37 +00:00
Gabor Juhos 200aa6db83 ar71xx: fixes leds for dir-825-c1
Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35854
2013-03-03 12:47:33 +00:00
Gabor Juhos 8798c73860 ramips: set -march=24kec for rt305x and rt3883 to enable use of DSP extension
All known rt305x and rt3883 implementations support at
least the 24kec instruction set which includes the DSP
extension. For rt288x, the previous value mips32r2 is
kept.

The cpu target is now set per sub-archtecture, according
to cpu-feature-overrides.h of each SoC family.

[juhosg: define ARCH_PACKAGES variable for rt305x/rt3883
in order to differentiate the packages compiled with
the 24Kec option.]

Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35853
2013-03-03 12:47:31 +00:00
Gabor Juhos 59ad675ef1 ramips: add user-space detection for ALL5002/ALL5003
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35852
2013-03-03 12:47:28 +00:00
Gabor Juhos 50e51e5ecc ramips: indicate support for ALL5003
add ALL5003 to board description in mach-all5002.c
adapt detection in user-space accordingly
(no functional changes)

Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35851
2013-03-03 12:47:25 +00:00
Gabor Juhos 367ab0a40f ramips: enhance user-space board detection
Similar to ar71xx, detect only once and cache the strings in
/tmp/sysinfo/model and /tmp/sysinfo/boardname.

Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35850
2013-03-03 12:47:02 +00:00
Gabor Juhos 1ba2272ca5 ramips: fix whitespace in /lib/ramips.sh
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35849
2013-03-03 12:46:08 +00:00
Felix Fietkau a9c584c277 Revert "[cns3xxx]: clean up PCI bus topology" (r35079)
It breaks PCIe IRQ mapping and possibly other things

SVN-Revision: 35842
2013-03-02 00:32:54 +00:00
Luka Perkov 107e0c6d1f ar71xx: add support for Buffalo WZR 600DHP
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 35840
2013-03-01 13:46:01 +00:00
Hauke Mehrtens 04af8bd108 brcm47xx: bgmac: omit the fcs
This fixes #13058 and hopefully #12927

SVN-Revision: 35834
2013-02-28 13:27:21 +00:00
Hauke Mehrtens 9805096f48 brcm47xx: bgmac: update to version form netdev git repository
SVN-Revision: 35833
2013-02-28 13:24:39 +00:00
Gabor Juhos 5412b6f32e ramips: add support for 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35801
2013-02-25 21:28:42 +00:00
Gabor Juhos a08646642e ramips: image: don't break make process if mkimage command fails
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35800
2013-02-25 21:28:40 +00:00
Gabor Juhos 275db5b4c4 ramips: remove port_power_off field from ehci_platform_data
It is removed in 3.8. Also add a revert patch for 3.7.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35799
2013-02-25 21:28:38 +00:00
Gabor Juhos 5e1d6ce077 ramips: remove __dev_{init,exit} annotations
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35798
2013-02-25 21:28:34 +00:00
Hauke Mehrtens 2c34e1aba5 brcm47xx: use bcm47xx_board_get() and detect some more boards in flash partition driver
SVN-Revision: 35791
2013-02-25 20:56:37 +00:00
Hauke Mehrtens 5d3b728372 brcm47xx: board detection WNDR3400v2
WNDR3400v2 is based on BCM53xx . Image that is created breaks the router somehow therefore "#".

CFE and NVRAM contain different vars - example:
CFE line original: Device eth0:  hwaddr 74-44-01-37-C6-69, ipaddr 192.168.1.1, mask 255.255.255.0
CFE after openwrt: Device eth0:  hwaddr 00-FF-FF-FF-FF-FF, ipaddr 192.168.1.1, mask 255.255.255.0

Logs were posted earlier on this mailing list: https://lists.openwrt.org/pipermail/openwrt-devel/2012-July/016174.html
Different logs with factory firmware are in the wiki: http://wiki.openwrt.org/toh/netgear/wndr3400#wndr3400v2
(and on wikidevi for example)

Signed off by: Dirk Neukirchen <dirkneukirchen@web.de>

SVN-Revision: 35790
2013-02-25 20:55:46 +00:00
Gabor Juhos f7879cd8d8 ar71xx: add profile and build image fot the TL-WA830RE v1 board
Added support for the TP-LINK TL-WA830RE v1 Range Extender.
Based on the WA901ND v1 support. Hardware IDs checked against
original firmware. Patch was successfully tested on hardware.

Signed-off-by: Ronald Hecht <ronald.hecht@gmx.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35789
2013-02-25 20:37:35 +00:00
Gabor Juhos ea71239d8a ar71xx: add model detection for the TL-WA830RE board
Signed-off-by: Ronald Hecht <ronald.hecht@gmx.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35788
2013-02-25 20:37:33 +00:00
Hauke Mehrtens 0f2fc0adfd brcm47xx: use same board detection code as kernel 3.8
SVN-Revision: 35770
2013-02-24 18:10:42 +00:00
Gabor Juhos 05de472518 adm5120: add support for 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35769
2013-02-24 18:08:14 +00:00
Gabor Juhos 3d65d0291c adm5120: remove __dev{init,exit} annotations
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35768
2013-02-24 18:08:03 +00:00
Gabor Juhos 0ab5ab2c08 adm5120: remove a superfluous patch
The NO_IRQ symbol is not used by the amba core since
upstream commit:

  dfb85185bda373a70409c70c2632b02fb0f8f449
  AMBA: get rid of last two uses of NO_IRQ

  This gets rid of the last two users of NO_IRQ in AMBA primecell
  drivers.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35748
2013-02-22 16:01:19 +00:00
Gabor Juhos 6419ffd20d adm5120: avoid warning caused by wrong AMBA irq values
The amba core throws a warning if -1 is used as an
irq value since upstream commit:

  2eac58d5026e4ec8b17ff8b62877fea9e1d2f1b3
  ARM: amba: make use of -1 IRQs warn

  Make the core warn about the use of -1 (NO_IRQ)

Cange the value of the unused IRQs to zero for the
UART devices to get rid of the warning.

Based on #12729.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35747
2013-02-22 16:01:17 +00:00
Gabor Juhos 42cdd3bef4 cns21xx: add support for 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35737
2013-02-21 20:45:24 +00:00
Gabor Juhos 9ec9adf3ea mpc83xx: add support for 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35736
2013-02-21 20:39:22 +00:00
Gabor Juhos c50881d7ba ppc44x: add support for 3.8
Compile tested only.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35735
2013-02-21 19:23:31 +00:00
Gabor Juhos fd645abca4 ppc40x: add support for 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35734
2013-02-21 19:23:29 +00:00
Gabor Juhos 4da13625d5 mpc85xx: add user-space support for the TL-WDR4900 v1
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35733
2013-02-21 19:20:34 +00:00
Gabor Juhos bd2c77b264 mpc85xx: update 3.8 config
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35732
2013-02-21 18:44:40 +00:00
Gabor Juhos bcac3c5569 ar71xx: fix MAC address assignment on the DIR-825-Bx boards
Use the same MAC addresses as the original firmware.

Based on a patch from #10421.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Tested-by: Gabor Varga <vargagab@gmail.com>

SVN-Revision: 35730
2013-02-21 17:58:21 +00:00
Gabor Juhos d785803bfa mpc85xx: add support for 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35729
2013-02-21 17:48:31 +00:00
Gabor Juhos cf2324fd6b ar71xx: add support for 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35728
2013-02-21 17:47:15 +00:00
Gabor Juhos 9cc3a60b5a atheros: add support for linux kernel v3.8
This builds and boots.

Because of the function pointer indirection (e.g. mtd_info's read
function pointer is assigned to spiflash_read), it is difficult for me
to understand where the calls are coming from (could be anywhere,
conditionally pointing at spiflash versions), so I punted and used the
renamed function pointers (_erase, _read, _write).  If someone knows
better what to do, please fix.

Cleaned up other sundry kernel tracking issues like get_phy_id and
__devinit,etc.

[juhosg: don't switch to that yet]

Signed-off-by: Russell Senior <russell@personaltelco.net>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35727
2013-02-21 17:45:54 +00:00
Gabor Juhos babd5aa2fc linux/3.8: add missing config symbols
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35726
2013-02-21 16:52:34 +00:00
Jonas Gorski ff20c0e1fc bcm63xx: Fix sysupgrade for tag-version 7 and 8
Fix sysupgrade for tag-version 7 and 8.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 35724
2013-02-21 11:45:41 +00:00
Jonas Gorski 3010a0b616 generic: b53: clear SM_SW_FWD_MODE unconditionally when enabling VLAN
Setting this bit stops BCM53125 (bgmac actually) from receiving any
packets. This bit is cleared conditionally in b53_switch_reset and it
seems the same is done in bcmrobo.c which never sets that bit again.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 35723
2013-02-21 11:45:38 +00:00
Jonas Gorski 23e71c56ba generic: b53: remove empty spaces
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 35722
2013-02-21 11:45:36 +00:00
Jonas Gorski 1cd62d06ca ramips: print image build warnings/errors to stderr
Makes warnings/errors visible when building with V=w/V=1.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35721
2013-02-21 11:45:33 +00:00
Jonas Gorski a0956a88d4 cns21xx: print image build warnings/errors to stderr
Makes warnings/errors visible when building with V=w/V=1.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35720
2013-02-21 11:45:31 +00:00
Jonas Gorski b91eab631b ar71xx: print image build warnings/errors to stderr
Makes warnings/errors visible when building with V=w/V=1.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35719
2013-02-21 11:45:29 +00:00
Gabor Juhos fad3fc1ad0 mpc85xx: add kmod-leds-gpio to the default packages
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35708
2013-02-21 10:26:03 +00:00
Gabor Juhos c837cae29c mpc85xx: disable a bunch of unused device nodes on the TL-WDR4900
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35707
2013-02-21 10:26:00 +00:00
Hauke Mehrtens 9afdb046d3 brcm47xx: do not use vlan0 any more.
The Broadcom switch driver says that vlan0 should not be used with any switch other than bcm5325.

This makes OpenWrt always use vlan1 and vlan2 instead.

SVN-Revision: 35704
2013-02-20 15:31:43 +00:00
Gabor Juhos 4305c6cda1 mpc85xx: add kernel support for the TL-WDR4900 v1 board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35690
2013-02-20 08:27:27 +00:00
Gabor Juhos 33ba984628 mpc85xx: use a foreach loop to copy boot images
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35689
2013-02-20 08:27:26 +00:00
Gabor Juhos 4341b11f3e ar71xx: remove __dev{init,exit} annotations from kernel files
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35687
2013-02-19 20:52:06 +00:00
Gabor Juhos 7d0d29ab6e linux/3.8: add missing Kconfig symbols
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35686
2013-02-19 20:52:03 +00:00
Gabor Juhos 76b797c759 mpc85xx: add default profile
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35677
2013-02-19 14:53:17 +00:00
Gabor Juhos debb9a4a97 mpc85xx: add gpio-keys to OF match table
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35676
2013-02-19 14:53:16 +00:00
Gabor Juhos 69cc70a43c mpc85xx: enable squashfs feature
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35675
2013-02-19 14:53:15 +00:00
Gabor Juhos ae9100e969 mpc85xx: add swconfig to default packages
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35674
2013-02-19 14:53:12 +00:00
Gabor Juhos ed0f43f1e2 kernel: update linux 3.8-rcX to 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35672
2013-02-19 09:17:38 +00:00
Florian Fainelli 1dd9e661be x86/rdc: migrate to common led helper functions
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35664
2013-02-18 10:38:05 +00:00
Florian Fainelli 677714309b rb532: migrate platform to common led helper functions
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35663
2013-02-18 10:38:02 +00:00
Florian Fainelli 2bfa1ed82c cobalt: migrate platform to common led helper functions
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35662
2013-02-18 10:37:58 +00:00
Florian Fainelli d7092aceb8 brcm63xx: migrate platform to common led helper functions
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35661
2013-02-18 10:37:55 +00:00
Florian Fainelli 5953e79888 au1000: migrate to common led helper functions
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35660
2013-02-18 10:37:52 +00:00
Florian Fainelli 15b66e0cbe ar7: migrate to common led helper functions
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35659
2013-02-18 10:37:43 +00:00
Gabor Juhos 90011a99f3 ramips: migrate to common led helper functions
[juhosg: migrate to status_led_blink_{preinit,failsafe} helpers]

Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35652
2013-02-18 09:56:29 +00:00
Gabor Juhos 32b41c4dd0 cns21xx: migrate to common led helper functions
[juhosg: migrate to status_led_blink_{preinit,failsafe} helpers]

Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35651
2013-02-18 09:56:28 +00:00
Gabor Juhos f6691c09c1 ar71xx: migrate to common led helper functions
[juhosg: migrate to status_led_blink_{preinit,failsafe} helpers]

Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35650
2013-02-18 09:56:27 +00:00
Gabor Juhos 546b336d2d adm5120: migrate to common led helper functions
[juhosg: migrate to status_led_blink_{preinit,failsafe} helpers]

Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35649
2013-02-18 09:56:26 +00:00
Gabor Juhos 3f749d1e8e kernel: update linux 3.7 to 3.7.9
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35644
2013-02-17 21:32:42 +00:00
Gabor Juhos 451dd745bd generic: ar8216: cleanup function/variable names
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35642
2013-02-17 12:48:25 +00:00
Gabor Juhos 51996304c4 generic: ar8216: rename struct ar8216_priv to ar8xxx_priv
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35641
2013-02-17 12:48:23 +00:00
Gabor Juhos 4215b1c93c ar71xx: add user-space support for the Mikrotik RB951G board
[juhosg: change rb-951g to rb-951g-2hnd in the scripts]

Patchwork: http://patchwork.openwrt.org/patch/3257/
Signed-off-by: Kamil Trzcinski <ayufan@ayufan.eu>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35634
2013-02-17 10:08:41 +00:00
Gabor Juhos 7a709573d7 ar71xx: add kernel support for the Mikrotik RB951G board
This is platform definition for the RB951G device. It's mostly rework
of RB2011UAS patchset with network taken from the RB751 patches.
The main difference is the flash layout used by this device.

[juhosg:
  - remove dead code from mach-rb951g
  - add "-2HnD" suffix to the machine name
  - use a separate 615-MIPS-ath79-RB951G-support.patch]

Patchwork: http://patchwork.openwrt.org/patch/3257/
Signed-off-by: Kamil Trzcinski <ayufan@ayufan.eu>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35633
2013-02-17 10:08:35 +00:00
Hauke Mehrtens 1a8218d6e4 brcm47xx: add initial support for kernel 3.8
This contains the following new bigger changes:
 * new partition parser which still could lake some features or have bugs
 * new nand flash driver
 * using physmap-flash flash driver for parallel flash
 * some changes to the serial flash driver

With these changes OpenWrt starts using more of the mainline flash drivers.

SVN-Revision: 35632
2013-02-16 20:28:24 +00:00
Gabor Juhos 17c36f540c ar71xx: fix kmod-usb2 package name
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35629
2013-02-16 17:33:06 +00:00
Gabor Juhos 4375dae6d3 ramips: fix kmod-usb2 package name
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35628
2013-02-16 17:26:52 +00:00
Gabor Juhos 62e80eba31 mpc85xx: add input drivers to default packages, and load those during preinit
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35626
2013-02-16 17:13:38 +00:00
Hauke Mehrtens ce6a7543fe brcm47xx: BGMAC - Adjust AutoLoad number to be prior to switch modules
Adjust the "AutoLoad" number for the BGMAC module to be prior
to the switch modules.  This probably isn't real important as
the modules are loaded in the correct order by preinit anyway.

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 35625
2013-02-16 16:27:33 +00:00
Hauke Mehrtens 9de704a03b brcm47xx: improve cpuport detection for filesafe
Do not try to load bcm57xx.ko any more this is not needed for kernel 2.6 and 3.X
Ask the switch driver where the CPU port is.

SVN-Revision: 35624
2013-02-16 16:24:15 +00:00
Hauke Mehrtens 92d16f38d7 brcm47xx: fix network config on simpleshare
The included patch will generate a correct network configuration on the simpletech simpleshare.

Thank you for the patch Will Holmes (RealOpty)

This closes #12361.

SVN-Revision: 35623
2013-02-16 15:24:48 +00:00
Hauke Mehrtens a21ba013f5 brcm47xx: handle return values of cfe_env_get() correctly.
This closes #12746.

SVN-Revision: 35622
2013-02-16 15:19:24 +00:00
Hauke Mehrtens 283bff02a2 brcm47xx: bgmac: fix unaligned accesses to network headers.
SVN-Revision: 35621
2013-02-16 14:38:17 +00:00
Hauke Mehrtens 5fed2916c3 brcm47xx: fix unaligned access to mac address
The mac address should be aligned to u16 to prevent an unaligned access
in drivers/ssb/pci.c where it is casted to __be16.

This closes #9824.

SVN-Revision: 35618
2013-02-16 13:46:00 +00:00
Hauke Mehrtens d9580d224a brcm47xx: try to automatically detect if the wan port is at port 4 and not at port 0.
This should fix #13000.

SVN-Revision: 35617
2013-02-16 12:37:24 +00:00
Gabor Juhos 7f20c2e19a update x86 generic to kernel v3.7
Signed-off-by: Russell Senior <russell@personaltelco.net>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35616
2013-02-16 12:12:52 +00:00
Gabor Juhos 7fd8525853 ramips: use the new macaddr_* helpers instead of maccalc
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35615
2013-02-16 11:50:25 +00:00
Gabor Juhos 753d713e92 ramips: use the mtd_get_mac_* helpers
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35613
2013-02-16 11:50:21 +00:00
Jonas Gorski dd77663fb0 kernel: add missing config options
r35336 exposed PTP, which has additional drivers on ixp4xx, causing it to
not build with PTP enabled.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35611
2013-02-16 11:39:45 +00:00
Jonas Gorski 485e52e1d8 bcm63xx: make nvram checksum failures non fatal
fixes #12982.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35605
2013-02-15 12:23:49 +00:00
Gabor Juhos 162b8e23a5 kernel: update linux 3.7 to 3.7.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35604
2013-02-15 07:36:15 +00:00
Gabor Juhos f35c369710 generic: ar8216: move PHY4 RGMII workaround code out of the loop
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35603
2013-02-14 14:55:40 +00:00
Gabor Juhos d64888ffc0 generic: ar8216: register the switch from the probe routine
Currently the switch gets registered when an ethernet
driver connects to a PHY of the switch. This method does
not work with the ethernet drivers which are connecting
to the PHY from their ndo_open callback. With those
ethernet drivers, the driver tries to register the switch
each time when the etherned device is opened and this causes
a deadlock.

Move the switch registration into the probe routine to fix
this problem.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35602
2013-02-14 14:01:24 +00:00
Florian Fainelli 31dc805f88 x86: update config-3.7 for x86 (turn off CONFIG_GPIO_ICH)
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35601
2013-02-14 13:00:07 +00:00
Hauke Mehrtens c0f6c75cf7 brcm47xx: if the cpuport of the switch is port 8 assume vlan0ports: "1 2 3 4 8" and vlan0ports: "0 8"
SVN-Revision: 35597
2013-02-14 12:38:16 +00:00
Gabor Juhos 9d86ba2ed4 mpc85xx: enable swconfig and the ar8216 driver
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35592
2013-02-13 16:51:23 +00:00
Gabor Juhos 6d18518e02 mpc85xx: enable the squashfs driver
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35591
2013-02-13 16:51:21 +00:00
Gabor Juhos c3b3f77621 mpc85xx: enable XZ_DEC_BCJ and XZ_DEC_POWERPC support
Squashfs is unable to decompress some blocks without that:

[  199.494500] SQUASHFS error: xz_dec_run error, data probably corrupt
[  199.500910] SQUASHFS error: squashfs_read_data failed to read block 0xbff26
[  199.508016] SQUASHFS error: Unable to read data cache entry [bff26]
[  199.514440] SQUASHFS error: Unable to read page, block bff26, size 153f8
[  199.521311] SQUASHFS error: Unable to read data cache entry [bff26]
[  199.527724] SQUASHFS error: Unable to read page, block bff26, size 153f8
[  199.534594] SQUASHFS error: Unable to read data cache entry [bff26]
[  199.541009] SQUASHFS error: Unable to read page, block bff26, size 153f8

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35590
2013-02-13 16:51:19 +00:00
Gabor Juhos 7484006498 ar71xx: fix factory image creation for dir-825-c1
Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35589
2013-02-13 16:36:26 +00:00
Gabor Juhos 5f10ec3c36 ar71xx: fix switch-config for dir-825-c1
Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35588
2013-02-13 16:36:23 +00:00
Hauke Mehrtens 54ca3eed5d brcm47xx: configure vlan correctly on some recent devices.
SVN-Revision: 35587
2013-02-13 16:05:52 +00:00
Hauke Mehrtens 4663d424a3 brcm47xx: add some more fixes to bgmac
Thank you Rafał Miłecki and Nathan Hintz

SVN-Revision: 35574
2013-02-12 20:10:38 +00:00
Hauke Mehrtens 7c0208b336 brcm47xx: update tg3 to the version send upstream
SVN-Revision: 35573
2013-02-12 20:09:15 +00:00
Luka Perkov 7973ef64d6 mvebu: remove boards suffix
SVN-Revision: 35572
2013-02-12 10:18:53 +00:00
Gabor Juhos bae4bfe3f8 kernel: update linux 3.7 to 3.7.7
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35571
2013-02-12 09:51:11 +00:00
Gabor Juhos 1f9ede9cfc ar71xx: add script for automatic switch name migration
Thanks to Jonas Gorski for the help.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35567
2013-02-11 21:41:16 +00:00
Felix Fietkau 2e7a4b088d ar71xx: allow unknown multicast frames to pass to the CPU on AR934x
SVN-Revision: 35564
2013-02-11 18:59:05 +00:00
Gabor Juhos 9525a075c1 ar8216: remove superfluous code from ar8216_config_init
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35562
2013-02-11 16:57:31 +00:00
Gabor Juhos 94806a13af ar71xx: use switchX names in network configuration
Accessing the AR8xxx switches via the name of the
attached ethernet device is not possible since
r35560. Change the uci-defaults script to use
switchX names in switch configurations.

Reported-by: Jonas Gorski <jogo@openwrt.org>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35561
2013-02-11 16:54:52 +00:00
Gabor Juhos 9c86d268eb generic: ar8216: don't use ethernet device name in register_switch
The switches are accessed via an MDIO bus. Set the alias
to the name of the MDIO bus, and show that in the message
along with the name of the switch switch device.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35560
2013-02-11 16:11:31 +00:00
Gabor Juhos 3f3eba88f6 generic: ar8216: reuse the private data from ar8216_probe
The private data of the switch is already
allocated in ar8216_priv, assign that to
each PHY on the same MDIO bus. Also remove
the redundant code from ar8216_config_init.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35559
2013-02-11 16:11:30 +00:00
Gabor Juhos 1afb759b35 generic: ar8216: use phydev instead of pdev everywhere
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35555
2013-02-11 13:25:43 +00:00
Gabor Juhos 0b1fe07e8e generic: ar8216: use pr_* macros for kernel messages
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35554
2013-02-11 13:14:00 +00:00
Gabor Juhos eea297884e generic: ar8216: fix PHY features setup
Sujith says:

This commit breaks the WAN port on my AP96 - DHCP fails.
Reverting it fixes the issue.

  commit b67cc3a0cdd02973610d4d5a63226d1c44841e94
  Author: juhosg <juhosg@3c298f89-4303-0410-b956-a3cf2f4a3e73>
  Date:   Fri Feb 8 09:13:18 2013 +0000

    generic: ar8216: simplify phy features setup

    Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

    git-svn-id: svn://svn.openwrt.org/openwrt/trunk@355183c298f89-4303-0410-b956-a3cf2f4a3e73

This change restores the previous behaviour and moves
the code into the ar8216_probe function.

Reported-by: Sujith Manoharan <sujith@msujith.org>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Tested-by: Sujith Manoharan <sujith@msujith.org>

SVN-Revision: 35549
2013-02-11 10:05:35 +00:00
Gabor Juhos 617076c613 generic: ar8216: add ar8xxx_probe_switch helper
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35547
2013-02-10 19:02:01 +00:00
Gabor Juhos 98b13e39ac generic: ar8216: rename ar8xxx_mib_cleanup to ar8xxx_mib_stop
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35546
2013-02-10 18:42:08 +00:00
Gabor Juhos f97170a720 generic: ar8216: free mib counters from ar8xxx_free
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35545
2013-02-10 18:42:07 +00:00
Gabor Juhos 7924e517af generic: ar8216: add ar8xxx_free helper
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35544
2013-02-10 18:42:05 +00:00
Gabor Juhos 77b3c551c4 generic: ar8216: add ar8xxx_create{,mii} helpers
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35543
2013-02-10 18:42:04 +00:00
Gabor Juhos 5f70b1db2a generic: ar8216: remove redundant phy address check
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35542
2013-02-10 18:38:12 +00:00
Gabor Juhos 14fd37258b generic: ar8216: only set phy_ptr if packet mangling is used
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35541
2013-02-10 18:38:10 +00:00
Gabor Juhos 393163b098 generic: ar8216: add defines for the AR8316 POSTRIP register
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35539
2013-02-10 13:18:48 +00:00
Gabor Juhos 5ed480598d generic: ar8216: don't probe the chip multiple times
It is only needed when the private data is allocated.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35538
2013-02-10 13:05:15 +00:00
Gabor Juhos 774da6c7a4 generic: ar8216: add sanity check to ar8216_probe
Verify that the mdio bus has PHY devices with
a supported PHY ID at address 0-4.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35537
2013-02-10 13:05:14 +00:00
Gabor Juhos 4720c75cf7 generic: ar8216: skip probe on unused PHY addresses
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35536
2013-02-10 13:05:12 +00:00
Jonas Gorski f07a33afc2 ar71xx: register the micro sd card reader on RB493G
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35535
2013-02-10 12:31:38 +00:00
Jonas Gorski eedc3554fe generic: b53: fix reverted error check in probe
b53_switch_detect returns value returned by b53_read8, which is 0 for
success. So fail (and return error) only if b53_switch_detect returned
something else than 0. This fixes supported and advertising being zeros
for MDIO access.

Cc: Jonas Gorski <jogo@openwrt.org>
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 35534
2013-02-10 12:31:36 +00:00
Jonas Gorski 200359a520 bcm63xx: handle huawei nvram layout
Use a different length for calculating the nvram checksum on hauwei
boards. Fixes boot on HW553 and HW556.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35533
2013-02-10 12:31:31 +00:00
Gabor Juhos de123c4409 generic: ar8216: move sleep out of the loop
It is enough to sleep once after ANEG is enabled on
all PHYs. This reduces boot time on boards with
AR8316 switch.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35532
2013-02-09 13:26:04 +00:00
Gabor Juhos 6ff973bdda ar71xx: Routerboard 751 Mac Address Offset Fix
We utilize many Routerboard 751's and discovered that our latest batch
of RB751's would not initialize the wireless radio. We have determined
Mikrotik has changed where the mac address was located inside hardconfig.
As such we utilize "routerboot_find_tag" to find the location of the mac
address. We should remove "RB751_MAC_ADDRESS_OFFSET" as it is ambiguous
by machine manufacturing date. The newer batch of RB751's that we received
had a RB751_MAC_ADDRESS_OFFSET 0x10.

Signed-off-by: Davey Hutchison <dhutchison@bluemesh.net>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35519
2013-02-08 09:34:53 +00:00
Gabor Juhos aa04441904 generic: ar8216: simplify phy features setup
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35518
2013-02-08 09:13:18 +00:00
Gabor Juhos 9c1f95a416 generic: ar8216: don't use mdio bus specific functions in ar8216_id_chip
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35517
2013-02-08 09:13:14 +00:00
Gabor Juhos 5393efc0c7 generic: ar8216: use inline function to convert swdev to ar8216
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35514
2013-02-07 15:18:36 +00:00
Gabor Juhos b87a1c757d generic: ar8216: add mii_bus field to struct ar8216_priv
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35513
2013-02-07 15:18:35 +00:00
Gabor Juhos c130a3feac generic: mvswitch: add detach callback
Use the detach callback to disable packet mangling
to avoid possible NULL pointer dereference.

Compile tested only.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35512
2013-02-07 15:18:34 +00:00
Gabor Juhos 4be8c22e74 generic: ar8216: add detach callback
The current code uses the 'remove' callback to disable
packet mangle on the underlying ethernet device.
However the attached_dev is always NULL when the
'remove' callback is called by phylib, and this causes
NULL pointer dereference, like this:

  [  475.300000] CPU 0 Unable to handle kernel paging request at virtual address 000000f0, epc == 801cdcf0, ra == 801c7eac
  [  475.310000] Oops[#1]:
  [  475.310000] Cpu 0
  [  475.310000] $ 0   : 00000000 00000000 00000000 00000001
  [  475.310000] $ 4   : 828dde00 00000005 828dde08 ffffffff
  [  475.310000] $ 8   : 00380081 00380081 82902a40 00000001
  [  475.310000] $12   : 00000037 00370081 00000001 00000000
  [  475.310000] $16   : 82865000 828dde08 828dde00 00000001
  [  475.310000] $20   : 00000080 00460000 00000002 77151448
  [  475.310000] $24   : 00000000 801abfd4
  [  475.310000] $28   : 82cc2000 82cc3d58 0053c3c4 801c7eac
  [  475.310000] Hi    : 00000007
  [  475.310000] Lo    : 00000004
  [  475.310000] epc   : 801cdcf0 ar8216_remove+0x1c/0x94
  [  475.310000]     Tainted: G           O
  [  475.310000] ra    : 801c7eac phy_remove+0x4c/0x6c
  [  475.310000] Status: 1000cc03    KERNEL EXL IE
  [  475.310000] Cause : 00800008
  [  475.310000] BadVA : 000000f0
  [  475.310000] PrId  : 00019750 (MIPS 74Kc)
  [  475.310000] Modules linked in: ath79_wdt ledtrig_usbdev ledtrig_netdev ag71xx(-) nf_nat_irc nf_nat_ftp nf_conntrack_irc nf_conntrack_ft
  p ipt_MASQUERADE iptable_nat xt_nat nf_nat_ipv4 nf_nat pppoext_conntrack xt_CT iptable_raw xt_state nf_conntrack_ipv4 nf_defrag_ipv4 nf_co
  nntrack ehci_hcd pppox ipt_REJECT xt_TCPMSS xt_LOG xt_comment xt_multiport xt_mac xt_limit iptable_mangle iptable_filter ip_tables xt_tcpu
  dp x_tables ppp_async ppp_generic slhc ath9k(O) ath9k_common(O) ath9k_hw(O) ath(O) mac80211(O) usbcore usb_common nls_base crc_ccitt cfg80
  211(O) compat(O) arc4 crypto_blkcipher aead ledtrig_timer ledtrig_default_on leds_gpio gpio_button_hotplug(O)
  [  475.310000] Process rmmod (pid: 1160, threadinfo=82cc2000, task=83969920, tls=7747c440)
  [  475.310000] Stack : 828dde08 802f5004 802f4680 00000001 828ddf70 801c7eac 802f4680 801ad6d8
          82902940 00000000 828dde08 802f5004 802f4680 801ad770 00000002 80269d94
          00000000 00000001 00000080 828dde08 828dde3c 801ad7fc 82902940 00000000
          83859100 00000000 8384dd2c 8384dd2c 828dde08 801ad230 82902800 00000000
          00000000 001a0041 828dde08 828dde08 802e80e8 801aac44 00000080 00460000
          ...
  [  475.310000] Call Trace:
  [  475.310000] [<801cdcf0>] ar8216_remove+0x1c/0x94
  [  475.310000] [<801c7eac>] phy_remove+0x4c/0x6c
  [  475.310000] [<801ad770>] __device_release_driver+0x6c/0xd0
  [  475.310000] [<801ad7fc>] device_release_driver+0x28/0x40
  [  475.310000] [<801ad230>] bus_remove_device+0xd8/0x10c
  [  475.310000] [<801aac44>] device_del+0x110/0x170
  [  475.310000] [<801aacb8>] device_unregister+0x14/0x28
  [  475.310000] [<801c92b0>] mdiobus_unregister+0x4c/0x70
  [  475.310000] [<82913060>] ag71xx_remove_ar8216_header+0xdc/0x5a8 [ag71xx]
  [  475.310000]
  [  475.310000]
  Code: 1200001c  8c82017c  ac800128 <8c4500f0> 3c03ffdf  3463ffff 00a31824  ac4300f0  ac4000e0

Add a detach callback and disable packet mangling in
that to fix the problem.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35511
2013-02-07 15:18:32 +00:00
Gabor Juhos fe61fc2d7d generic: add detach callback to struct phy_driver
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35510
2013-02-07 15:18:24 +00:00
Hauke Mehrtens 07db9e8eab brcm47xx: fix name of kmod-ocf-ubsec-ssb
This also removes kmod-ocf, because kmod-crypto-ocf is automatically selected by kmod-ocf-ubsec-ssb.

Thank you Manuel Munz <freifunk@somakoma.de> for the patch.

SVN-Revision: 35509
2013-02-06 22:51:25 +00:00
Hauke Mehrtens a52832164b brcm47xx: bgmac: make it possible to set the devices into promisc mode when it is already up
This fixes #12927.

SVN-Revision: 35507
2013-02-06 14:57:00 +00:00
Florian Fainelli 6b0da6db6a remove support for 3.6 kernel
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35506
2013-02-05 22:36:54 +00:00
Florian Fainelli e22926a46b make default version 3.7.6
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35505
2013-02-05 22:36:50 +00:00
Florian Fainelli 57803a98ec remove superfluous calls to /lib/brcm63xx.sh
The first preinit script 03_do_brcm63xx.sh does the right job of
exporting variables for the other subsequent preinit scripts to use
them.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35504
2013-02-05 22:25:30 +00:00
Florian Fainelli 84d306d23c remove references to the old switch driver
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35503
2013-02-05 22:25:19 +00:00
Mirko Vogt ec19a23bae fix trx checksum after first boot and add led/button definitions for boards RTA770BW and RTA770W
SVN-Revision: 35501
2013-02-05 14:57:43 +00:00
Mirko Vogt f460388ce2 add support for board named RTA770W
Actually this board is the very same as the rta770bw,
where the additional 'b' within the name just
indicates 'Annex B'. The ADSL Modem itself is able
to handle both, Annex A as well as Annex B -
the loaded firmware makes the only difference

SVN-Revision: 35500
2013-02-05 14:57:40 +00:00
Gabor Juhos 395d0bdc1f generic: ar8216: clear driver specific data pointer in phy_device
This is needed to avoid a NULL pointer dereference:

  [   19.525270] Unable to handle kernel paging request for data at address 0x00000018
  [   19.532750] Faulting instruction address: 0xc016e104
  [   19.537714] Oops: Kernel access of bad area, sig: 11 [#1]
  [   19.543102] P1010 RDB
  [   19.545365] Modules linked in: booke_wdt nf_nat_irc nf_nat_ftp nf_conntrack_irc nf_conntrack_ftp ipt_MASQUERADE iptable_nat xt_nat d
  [   19.590725] NIP: c016e104 LR: c0171490 CTR: 00000000
  [   19.595681] REGS: c4bc3c10 TRAP: 0300   Tainted: G        W  O (3.7.6)
  [   19.602284] MSR: 00029000 <CE,EE,ME>  CR: 82002022  XER: 20000000
  [   19.608381] DEAR: 00000018, ESR: 00000000
  [   19.612382] TASK = c4cd9c80[2070] 'ifconfig' THREAD: c4bc2000
  GPR00: 00000001 c4bc3cc0 c4cd9c80 00000000 c7811000 00000000 00000000 0000e8ec
  GPR08: 0000e8eb 00000000 00029000 00000001 00000000 100801f8 1005c51c 1005c514
  GPR16: 1005c468 1005c54c 1005c258 1005c530 10060000 00000000 c7811000 ffff8914
  GPR24: c7815030 c793e400 10063adb 00000000 c7811000 c045594c c78ca600 c7815000
  [   19.646352] NIP [c016e104] register_switch+0x98/0x2d0
  [   19.651397] LR [c0171490] ar8216_config_init+0x2d8/0x3f4
  [   19.656697] Call Trace:
  [   19.659138] [c4bc3cc0] [c0170490] ar8216_mii_read+0x64/0xc4 (unreliable)
  [   19.665835] [c4bc3d00] [c0171490] ar8216_config_init+0x2d8/0x3f4
  [   19.671835] [c4bc3d20] [c016cf8c] phy_init_hw+0x50/0x6c
  [   19.677053] [c4bc3d30] [c016d078] phy_attach_direct+0xd0/0xf8
  [   19.682793] [c4bc3d50] [c016d154] phy_connect_direct+0x24/0x68
  [   19.688621] [c4bc3d70] [c0183b70] of_phy_connect+0x48/0x6c
  [   19.694102] [c4bc3d90] [c0175aac] gfar_enet_open+0x254/0x3d8
  [   19.699755] [c4bc3db0] [c019acc4] __dev_open+0xc0/0x120
  [   19.704975] [c4bc3dd0] [c019af98] __dev_change_flags+0xd4/0x15c
  [   19.710888] [c4bc3df0] [c019b0d4] dev_change_flags+0x1c/0x60
  [   19.716544] [c4bc3e10] [c01ebb94] devinet_ioctl+0x290/0x690
  [   19.722111] [c4bc3e70] [c01ec8d4] inet_ioctl+0x88/0xbc
  [   19.727245] [c4bc3e80] [c0186b98] sock_ioctl+0x258/0x294
  [   19.732551] [c4bc3ea0] [c009c00c] do_vfs_ioctl+0x6a4/0x728
  [   19.738031] [c4bc3f10] [c009c0d4] sys_ioctl+0x44/0x70
  [   19.743077] [c4bc3f40] [c000c74c] ret_from_syscall+0x0/0x3c
  [   19.748646] --- Exception: c01 at 0x48091b34
  [   19.748646]     LR = 0x480e4b64
  [   19.756033] Instruction dump:
  [   19.758991] 2f830000 907f0050 3860fff4 419e021c 837f0000 38000000 901f0038 901f0040
  [   19.766744] 901f003c 7f600034 5400d97e 0f000000 <801b0018> 2f800000 40be0010 801b001c

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35497
2013-02-05 08:39:26 +00:00
Gabor Juhos 2e7f38c243 generic: ar8216: unregister switch on error path
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35496
2013-02-05 08:39:24 +00:00
Gabor Juhos 1bb8ad6050 mpc85xx: enable GPIO sysfs interface
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35495
2013-02-05 07:48:02 +00:00
Gabor Juhos 6ba265a573 mpc85xx: enable Freescale eSPI driver and m25p80 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35494
2013-02-05 07:48:01 +00:00
Gabor Juhos eea43ffd33 mpc85xx: sync kernel config
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35493
2013-02-05 07:47:59 +00:00
Hauke Mehrtens 8ba8225686 brcm47xx: fix detection of Asus RT-N16
This fixes #12936.

SVN-Revision: 35492
2013-02-04 22:49:05 +00:00
Hauke Mehrtens a1e3c0ca46 Add Failsafe support for Linksys E3000V1 / WRT610NV2
Adds specification of the correct cpu_port for Linksys E3000V1 and WRT610NV2
in /lib/preinit/05_init_interfaces_brcm.  The list of devices will need to
be expanded.  Is there a way to determine the correct cpu_port to use in a
generic sense; for instance, if "/proc/switch/eth0/port/8" exists, or if
"/sys/class/net/eth0/device/driver/module/drivers/bcma:bgmac" exists?  Could
a similar method be used in "/etc/init.d/netconfig"?

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 35491
2013-02-04 22:40:57 +00:00
Hauke Mehrtens c2198aba32 brcm47xx: Fix switch config on 4716/53115 devices
Signed-off-by: Jonathan McCrohan <jmccrohan@gmail.com>

SVN-Revision: 35490
2013-02-04 22:38:37 +00:00
Gabor Juhos b97aee1ee8 coldfire: R.I.P.
The target still uses 2.6.38. The support of that
kernel version has been removed ~9 months ago.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35489
2013-02-04 15:23:10 +00:00
Gabor Juhos c41002971a leon: R.I.P.
It is broken since ~9 months and nobody takes care of that.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35488
2013-02-04 15:23:08 +00:00
Gabor Juhos 539e0b5b84 imx21: R.I.P.
It is broken since ~22 months and nobody takes care of that.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35487
2013-02-04 15:23:07 +00:00
Gabor Juhos e7dee4ea87 octeon: R.I.P.
It is broken since ~8 months and nobody takes care of that.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35486
2013-02-04 15:23:05 +00:00
Gabor Juhos da44b916cf omap35xx: R.I.P.
It is broken since ~22 months and nobody takes care of that.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35485
2013-02-04 15:23:04 +00:00
Jonas Gorski 8506964e6d bcm63xx: add support for linux 3.8
Based on 3.8-rc6

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35482
2013-02-04 10:19:55 +00:00
Jonas Gorski 3b4fced67d bcm63xx: add support for linux 3.7
Based on 3.7.6.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35481
2013-02-04 10:19:50 +00:00
Jonas Gorski 0e9365b346 kernel: generic: update the ehci overcurrent patch to upstream submission
Adds support for setting this in the generic platform driver's platform_data.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35480
2013-02-04 10:19:37 +00:00
Jonas Gorski e0fe5596f8 kernel: generic: add back the patch exporting bcm63xx tag header
It went missing when adding linux 3.7 support.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35479
2013-02-04 10:19:35 +00:00
Jonas Gorski 34ad8f4e75 kernel: generic: update to 3.8-rc6
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35478
2013-02-04 10:19:28 +00:00
Jonas Gorski a15e1a950d bcm63xx: refresh 3.6 patches
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35477
2013-02-04 10:19:24 +00:00
Gabor Juhos 08ff976720 kernel: update linux 3.7 to 3.7.6
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35476
2013-02-04 10:02:56 +00:00
Gabor Juhos b1168e70d3 ar71xx: use backported PCI_MEM_SIZE patches
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35470
2013-02-02 18:17:58 +00:00
Gabor Juhos b9b341f05a ar71xx: rename ar933x_uart patch
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35469
2013-02-02 18:17:53 +00:00
Gabor Juhos 9ed81a91f3 ramips: build image for the Omnima EMB HPM board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35468
2013-02-02 17:21:06 +00:00
Gabor Juhos 813aec6796 ramips: add user-space support for the Omnima EMB HPM board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35467
2013-02-02 17:21:05 +00:00
Gabor Juhos d578f3ac38 ramips: rt3883: add kernel support for the Omnima EMB HPM board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35466
2013-02-02 17:21:01 +00:00
Gabor Juhos b99b2ff553 ramips: add userspace support for the Edimax BR-6425
[juhosg: remove sysupgrade changes]

Signed-off-by: Yuval Adam <yuv.adm@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35463
2013-02-02 17:01:50 +00:00
Gabor Juhos 0a42e38bad ramips: add kernel support for the Edimax BR-6425 board
Signed-off-by: Yuval Adam <yuv.adm@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35462
2013-02-02 17:01:47 +00:00
Gabor Juhos 4ac6eb480b x86/kvm_guest: add support for 3.7
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35460
2013-02-02 15:31:57 +00:00
Gabor Juhos c340ef2ae2 x86: add missing symbols for 3.7
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35459
2013-02-02 15:31:55 +00:00
Gabor Juhos 0f46f47512 x86/kvm_guest: add missing symbols for 3.3
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35458
2013-02-02 15:31:54 +00:00
Gabor Juhos ab3e3cacaa alix2: convert from kernel version 3.3.8 to 3.7.5
[juhosg: use 3.7.5 instead of 3.7.3]

Signed-off-by: Russell Senior <russell@personaltelco.net>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35457
2013-02-02 15:31:52 +00:00
Gabor Juhos 4c223d7d4f generic: convert crypto-ocf from kernel_thread to kthread
recent kernels have finally stopped exporting kernel_thread, since a
deprecation circa 2006.  This patch attempts to convert to the newer
kernel kthread API, particularly in random.c

[juhosg: remove randomproc variable, it is not required after the patch]

Signed-off-by: Russell Senior <russell@personaltelco.net>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35456
2013-02-02 15:31:44 +00:00
Gabor Juhos 7c87d28054 ar71xx: fixes whitespaces for dir-825-c1
Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35455
2013-02-02 15:02:19 +00:00
Gabor Juhos ecf55822bb mpc85xx: nuke 3.6 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35453
2013-02-02 10:05:43 +00:00
Gabor Juhos 242859abae mpc85xx: switch to 3.7
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35452
2013-02-02 10:05:40 +00:00
Gabor Juhos cde71c305c mpc85xx: add support for linux 3.7
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35451
2013-02-02 10:05:37 +00:00
Gabor Juhos bbfd8cbf94 linux/3.7: add missing config symbols
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35450
2013-02-02 10:05:08 +00:00
Gabor Juhos 9a438b2271 ar71xx: build images for the TP-LINK TL-WR743ND v2
AR9331 based, these same as 741v4

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35449
2013-02-02 10:01:15 +00:00
Gabor Juhos 668e529220 generic: fix gc_sections patch
Due to the patch, essential '.data..*' sections are merged
into the '.data' section:

  --- vmlinux.good.sect   2013-02-01 23:49:16.000000000 +0100
  +++ vmlinux.bad.sect    2013-02-01 23:49:02.000000000 +0100
  @@ -1,5 +1,5 @@

  -vmlinux.good:     file format elf32-powerpc
  +vmlinux.bad:     file format elf32-powerpc

   Sections:
   Idx Name          Size      VMA       LMA       File off  Algn
  @@ -53,43 +53,35 @@
                     CONTENTS, ALLOC, LOAD, READONLY, DATA
    24 .machine.desc 00000460  c04e1000  004e1000  004f1000  2**2
                     CONTENTS, ALLOC, LOAD, DATA
  - 25 .data         0000f6a0  c04e2000  004e2000  004f2000  2**12
  + 25 .data         0001635c  c04e2000  004e2000  004f2000  2**12
                     CONTENTS, ALLOC, LOAD, DATA
  - 26 .data..init_task 00002000  c04f2000  004f2000  00502000  2**3
  -                  CONTENTS, ALLOC, LOAD, DATA
  - 27 .data..page_aligned 00002000  c04f4000  004f4000  00504000  2**12
  -                  CONTENTS, ALLOC, LOAD, DATA
  - 28 .data..cacheline_aligned 00000c00  c04f6000  004f6000  00506000
    2**5
  -                  CONTENTS, ALLOC, LOAD, DATA
  - 29 .data..read_mostly 000015e0  c04f6c00  004f6c00  00506c00  2**3
  -                  CONTENTS, ALLOC, LOAD, DATA
  - 30 .sbss         000002e0  c04f9000  004f9000  005081e0  2**3
  + 26 .sbss         000002e0  c04fa000  004fa000  0050835c  2**3
  <...>

This causes boot hang on powerpc. Modify the patch to
ensure that the kernel specific '.data..*' sections
remain separate.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35447
2013-02-02 09:30:47 +00:00
Gabor Juhos 31af0dc186 ar71xx: fix mac address calculation on the OpenMesh MR600
Signed-off-by: Marek Lindner <marek@open-mesh.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35446
2013-02-02 08:47:41 +00:00
Gabor Juhos 257b21f2d4 mpc85xx: nuke 3.3 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35445
2013-02-01 17:49:56 +00:00
Gabor Juhos cf2faab4ae mpc85xx: switch to 3.6
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35444
2013-02-01 17:49:54 +00:00
Gabor Juhos 56849d146c mpc85xx: add support for 3.6
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35443
2013-02-01 17:49:53 +00:00
Gabor Juhos 630fffbead mpc85xx: fix dts name for P1010RDB
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35442
2013-02-01 17:49:52 +00:00
Gabor Juhos a2529eab2b linux/3.6: add missing config symbols
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35441
2013-02-01 17:30:18 +00:00
Gabor Juhos fb936218a1 linux/3.6: refresh patches
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35440
2013-02-01 17:30:15 +00:00
Gabor Juhos 495820f7a0 mpc85xx: remove broken flag
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35439
2013-02-01 17:28:54 +00:00
Gabor Juhos 4cb7e749ab mpc85xx: build fdt file for the PB1010RDB board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35438
2013-02-01 17:28:51 +00:00
Gabor Juhos 20ca35570e mpc85xx: enable PB1010RDB support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35437
2013-02-01 17:28:49 +00:00
Gabor Juhos 21b15ddda5 mpc85xx: image: fix building of multiple dtb files
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35436
2013-02-01 17:28:47 +00:00
Gabor Juhos d158dfc607 linux/3.3: disable crashlog on PPC
It causes NULL pointer dereference:

[    0.638235] __ioremap(): phys addr 0x7f00000 is RAM lr c025d61c
[    0.644090] Unable to handle kernel paging request for data at address 0x00000000
[    0.651533] Faulting instruction address: 0xc025d620
[    0.656483] Oops: Kernel access of bad area, sig: 11 [#1]
[    0.661856] P1010 RDB
[    0.664113] Modules linked in:
[    0.667152] NIP: c025d620 LR: c025d61c CTR: c000dc38
[    0.672101] REGS: c7831ef0 TRAP: 0300   Not tainted  (3.3.8)
[    0.677740] MSR: 00029000 <CE,EE,ME>  CR: 42022082  XER: 20000000
[    0.683817] DEAR: 00000000, ESR: 00000000
[    0.687811] TASK = c782c000[1] 'swapper' THREAD: c7830000
[    0.693017] GPR00: a1ee0000 c7831fa0 c782c000 00000000 0000214c ffffffff c7831ea6 0001ffff
[    0.701350] GPR08: c03697cc c035fba0 c03697cc c0360000 42022022 00000000 00000000 00000000
[    0.709682] GPR16: c0000a00 00000014 3fffffff 00ffa000 00000015 07fc42bc c0360000 00000000
[    0.718015] GPR24: 00000000 00000000 00001680 c0360000 00000000 c025d5e8 c0390000 c038b824
[    0.726535] NIP [c025d620] crashlog_init_fs+0x38/0xd8
[    0.731560] LR [c025d61c] crashlog_init_fs+0x34/0xd8
[    0.736503] Call Trace:
[    0.738939] [c7831fa0] [c025d61c] crashlog_init_fs+0x34/0xd8 (unreliable)
[    0.745712] [c7831fb0] [c0001e98] do_one_initcall+0xd4/0x198
[    0.751357] [c7831fe0] [c02537f4] kernel_init+0x9c/0x120
[    0.756647] [c7831ff0] [c000c2dc] kernel_thread+0x4c/0x68
[    0.762022] Instruction dump:
[    0.764975] 3860fff4 bfc10008 3fc0c039 90010014 3bfeb824 801f0004 2f800000 41be00a0
[    0.772699] 7c030378 38804000 4bdb38cd 3c00a1ee <81630000> 6000dead 7c691b78 907eb824

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35435
2013-02-01 17:28:44 +00:00
Gabor Juhos fb2e2a56d7 refresh kernel configs
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35434
2013-02-01 17:28:40 +00:00
Gabor Juhos 6805275fdc ar71xx: sysupgrade - fix OpenMesh MR600 total flash size
Signed-off-by: Marek Lindner <marek@open-mesh.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35433
2013-02-01 15:50:54 +00:00
Gabor Juhos 979676ffcc ar71xx: add sysupgrade support for OpenMesh MR600v2
Signed-off-by: Marek Lindner <marek@open-mesh.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35430
2013-02-01 15:50:47 +00:00
Gabor Juhos 2af995ba1d ar71xx: add user-space support for OpenMesh MR600v2
Signed-off-by: Marek Lindner <marek@open-mesh.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35429
2013-02-01 15:50:45 +00:00
Gabor Juhos 8837d3a49b ar71xx: add kernel support for the OpenMesh MR600v2
Signed-off-by: Marek Lindner <marek@open-mesh.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35428
2013-02-01 15:50:42 +00:00
Gabor Juhos 150bb9d0b1 ar71xx: remove unused OpenMesh MR600 led definitions
Signed-off-by: Marek Lindner <marek@open-mesh.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35427
2013-02-01 15:50:39 +00:00
Gabor Juhos fe3db74276 ar71xx: remove unused OpenMesh MR6000 platform code
Signed-off-by: Marek Lindner <marek@open-mesh.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35426
2013-02-01 15:50:37 +00:00
Gabor Juhos 492cbcdd6b ar71xx: build image for the TL-WDR3500 board
Based on http://patchwork.openwrt.org/patch/3208/

Thanks-to: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Gui Iribarren <gui@altermundi.net>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35425
2013-02-01 15:50:34 +00:00
Gabor Juhos 119dc460a3 ar71xx: add user-space support for TL-WDR3500 board
Based on http://patchwork.openwrt.org/patch/3208/

Thanks-to: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Gui Iribarren <gui@altermundi.net>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35424
2013-02-01 15:50:32 +00:00
Gabor Juhos 5bd02ca895 ar71xx: add kernel support for the TL-WDR3500 board
WDR3500 is similar to WDR3600 except it doesn't have gigabit ethernet,
and has only 1 USB port.

Pending issues:

  * Leds are not working at all (except power and wlan_5g)
  * LAN switch ethernet ports are reversed with respect to case label.

  [Label] -> soft device
  [LAN1] -> eth0.4
  [LAN2] -> eth0.3
  [LAN3] -> eth0.2
  [LAN4] -> eth0.1

Based on http://patchwork.openwrt.org/patch/3208/

Thanks-to: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Gui Iribarren <gui@altermundi.net>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35423
2013-02-01 15:50:29 +00:00
Jonas Gorski ce8b226046 bcm63xx: replace kmod-switch with swconfig in default package set
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35407
2013-01-30 00:19:21 +00:00
Gabor Juhos f7ff677169 ar71xx: add profile and build image for dir-825-c1
Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35403
2013-01-29 22:50:57 +00:00
Gabor Juhos 2a5193308f ar71xx: add user space support for dir-825-c1
[juhosg: fix whitespaces in some scripts]

Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35402
2013-01-29 22:50:54 +00:00
Gabor Juhos 800da21cb1 ar71xx: add kernel support for dir-825-c1
[juhosg:
 - remove unused GPIO stuff
 - use a separate kernel patch for machine integration]

Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35401
2013-01-29 22:50:50 +00:00
Gabor Juhos 5a2aa8f184 generic: fix default compression selection in ubifs
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35398
2013-01-29 21:32:22 +00:00
Gabor Juhos da9a704e92 ar71xx: add profile and generate images for the AP132 board
Based on http://patchwork.openwrt.org/patch/3162/

Signed-off-by: Embedded Wireless GmbH <info at embeddedwireless.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35397
2013-01-29 19:12:34 +00:00
Gabor Juhos 5d4ddbce72 ar71xx: add user-space support for the AP132 board
Based on http://patchwork.openwrt.org/patch/3162/

Signed-off-by: Embedded Wireless GmbH <info at embeddedwireless.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35396
2013-01-29 19:12:32 +00:00
Gabor Juhos 5ca187570f ar71xx: add kernel support for Atheros AP132 Reference Board
Based on http://patchwork.openwrt.org/patch/3162/

Signed-off-by: Embedded Wireless GmbH <info at embeddedwireless.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35395
2013-01-29 19:12:30 +00:00
Gabor Juhos 8a9d92f125 ar71xx: fix ethernet device registration for the QCA9556 SoC
Based on http://patchwork.openwrt.org/patch/3162/

Signed-off-by: Embedded Wireless GmbH <info at embeddedwireless.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35394
2013-01-29 19:12:28 +00:00
Gabor Juhos e9dbff1193 ar71xx: add kernel support for the QCA9556 SoC
Based on http://patchwork.openwrt.org/patch/3162/

Signed-off-by: Embedded Wireless GmbH <info at embeddedwireless.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35393
2013-01-29 19:12:26 +00:00
Gabor Juhos df15e5cd61 ar71xx: enable fast flash read on dual-flash devices
This improves flash read speed on various Buffalo units.

mtd_speedtest results on the WZR-HP-AG300H:

                          old         new        delta
eraseblock read speed:  726 KiB/s   2068 KiB/s   +184.85%
page read speed:        699 KiB/s   1973 KiB/s   +182.26%
2 page read speed:      711 KiB/s   2043 KiB/s   +187.34%

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35392
2013-01-29 19:12:25 +00:00
Gabor Juhos 562ba537fc kernel: update linux 3.7 to 3.7.5
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35390
2013-01-29 18:29:45 +00:00
John Crispin c6744513a3 fix mtd_mp25p80_add_gd25q32_gd25q64.patch
SVN-Revision: 35378
2013-01-29 11:06:57 +00:00
Florian Fainelli 714b2cfef3 Fix GigaDevice GD25Q32/GD25Q64 SPI Flash bad commit
Fix GigaDevice GD25Q32/GD25Q64 SPI Flash bad commit.

The patch was added to "linux/generic/patches-3.6" instead of
"target/linux/generic/patches-3.6".
I also fixed a missing patch space and refreshed generic patches.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35367
2013-01-29 09:46:11 +00:00
Gabor Juhos e252a1492c generic: fix build failure in MIPS kexec code if SMP is enabled
Fix it for older kernels as well.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35366
2013-01-29 09:44:58 +00:00
Gabor Juhos 22ce389e6a ar71xx: add TP-LINK WA-801ND to run-time model detection
A small cosmetic fix to show the HW model name correctly in LuCI.

Patch-by: Amir Sagie <openwrt-devel@taproot.org.il>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35365
2013-01-29 09:40:29 +00:00
Gabor Juhos 1b3c6ad1fb generic: fix build failure in MIPS kexec code if SMP is enabled
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35364
2013-01-29 09:40:23 +00:00
John Crispin 756a7c5451 fix for non-blinking LAN LEDs
https://dev.openwrt.org/ticket/12830

SVN-Revision: 35359
2013-01-28 18:06:31 +00:00
John Crispin a0f7a3c214 dont load gptu on ase
fixes #12792

SVN-Revision: 35357
2013-01-28 17:46:07 +00:00
John Crispin d93706154b ramips: reset switch on single-port devices
Signed-off-by: Daniel Gole <dgolle@allnet.de>

SVN-Revision: 35356
2013-01-28 17:44:41 +00:00
John Crispin 0de0955931 refresh patches
SVN-Revision: 35355
2013-01-28 17:44:20 +00:00
John Crispin 0183df8ed9 Fix ARV7518 USB
This patch correctly fixes USB on Lantiq ARV7518.
There was a failed attempt on fixing this on r35077 (https://dev.openwrt.org/changeset/35077/).

Signed-off-by: José Vázquez Fernández <ppvazquezfer@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 35354
2013-01-28 17:43:35 +00:00
John Crispin 3534757bb9 Add ath9k eeprom and pci fixup support
Add ath9k eeprom and pci fixup support (again) for linux 3.7.

On linux 3.3, the fixup forced the regdomain to 0x67, causing low TX power.
This patch only corrects checksum, the rest of the EEPROM isn't changed.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 35353
2013-01-28 17:43:25 +00:00
John Crispin 5eb43d4cf8 Add support for ARV4518PW R01 and rename R01A.
There are two different versions of SMC7908A-ISP: R01 and R01A.
R01 has an internal clock for PCI, meanwhile R01A has an external clock.

This fixes: https://dev.openwrt.org/ticket/12884

Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 35352
2013-01-28 17:42:59 +00:00
Felix Fietkau 1dc9c8ef69 kernel: disable CONFIG_CRYPTO_MANAGER2, it is not needed
SVN-Revision: 35342
2013-01-27 23:23:39 +00:00
Hauke Mehrtens 68aeb7af8e brcm47xx: load pps_core and ptp before tg3 to make the interface available for failsafe.
SVN-Revision: 35341
2013-01-27 21:48:28 +00:00
Hauke Mehrtens a9175c90cf kernel: b53: the b53 spi driver depends on spi
SVN-Revision: 35340
2013-01-27 21:39:53 +00:00
Hauke Mehrtens 62554217fc kernel: add packages for pps and ptp, they are needed by tg3 in kernel 3.8
SVN-Revision: 35336
2013-01-27 21:18:52 +00:00
Felix Fietkau 8193bbe59a netfilter: add support for flushing conntrack via /proc
SVN-Revision: 35330
2013-01-27 19:02:38 +00:00
Felix Fietkau 156a6e7999 kernel: clean up crypto kconfig options on 3.8
SVN-Revision: 35329
2013-01-27 17:49:09 +00:00
Hauke Mehrtens 721bf97863 kernel: remove __devinit, __devexit and __devexit_p for kernel 3.8
These attributes where removed with kernel 3.8 and are now causing compile errors.

SVN-Revision: 35328
2013-01-27 17:48:48 +00:00
Felix Fietkau ed7ca5d44e kernel: clean up crypto related kconfig options
SVN-Revision: 35327
2013-01-27 17:23:12 +00:00
Felix Fietkau 8a1091ad53 ar71xx: disable support for unsupported mtd configuration, saves about 5K kernel size after lzma
SVN-Revision: 35326
2013-01-27 16:38:27 +00:00
Felix Fietkau 044c316167 kernel: prevent cryptomgr from pulling in useless extra dependencies for tests that are not run
Reduces kernel size after LZMA by about 5k on MIPS

SVN-Revision: 35325
2013-01-27 16:21:08 +00:00
Hauke Mehrtens e083c7926b brcm47xx: create image for Netgear WNDR3400 V1
SVN-Revision: 35323
2013-01-26 20:34:38 +00:00
Hauke Mehrtens 05623aebef brcm47xx: add initial board detection code
SVN-Revision: 35322
2013-01-26 20:34:00 +00:00
Hauke Mehrtens a83d7bb109 brcm47xx: add gpio to irq function again
SVN-Revision: 35321
2013-01-26 20:33:23 +00:00
Felix Fietkau 8933b918cd kernel: use -ffunction-sections, -fdata-sections and --gc-sections on mips
in combination with kernel symbol export stripping this significantly reduces
the kernel image size

SVN-Revision: 35320
2013-01-26 16:26:13 +00:00
Gabor Juhos 15be1c9ee7 kernel: update linux 3.7 to 3.7.4
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35318
2013-01-24 17:08:37 +00:00
Florian Fainelli 680f460861 kernel: refresh 3.8 patches
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35317
2013-01-24 17:04:52 +00:00
Florian Fainelli 9781461a3d mvebu: update to 3.8-rc4
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35316
2013-01-24 17:04:46 +00:00
Hauke Mehrtens 4a69e20a10 kernel: add missing config options for 3.8
SVN-Revision: 35315
2013-01-24 14:48:15 +00:00
Hauke Mehrtens 76c12ff797 brcm47xx: change generic profiles
The default profile now contains Ethernet drivers for all the types
found on supported boards. There are other profiles for each Ethernet
driver.

SVN-Revision: 35314
2013-01-24 14:38:10 +00:00
Felix Fietkau b60fc82ce5 kernel: remove the cisco sip phone patch for 3.7 and 3.8 as well
SVN-Revision: 35310
2013-01-23 16:31:38 +00:00
Felix Fietkau 8ce8960959 ar71xx: sync kernel sizes where possible to fix images for some devices (#12874)
SVN-Revision: 35309
2013-01-23 16:29:25 +00:00
Jonas Gorski 8411e5c06e bcm63xx: switch to b53 and swconfig
Switch to using the B53 switch driver where appropriate.

Use a non-tagged default config where it isn't confirmed to be
working.

Remove the switch configuration in preinit as the switch will now
be configured by the driver  to use port isolation to prevent leakage
between lan and wan.

While at it, also provide a switch config for Neufbox 6.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35307
2013-01-23 10:12:40 +00:00
Jonas Gorski 17d51121a6 bcm63xx: expose the internal switch to b53
Allow b53 access to the internal switch of BCM6328, BCM6362 and BCM6368.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35306
2013-01-23 10:12:37 +00:00
Jonas Gorski bb0118c66f generic: add b53 swconfig switch driver
Add swconfig switch driver for Broadcom BCM53XX switch chips. Supports
switches connected through MDIO, SPI or memory mapped registers, and
supports BCM5325, BCM539x, BCM531x5 and the BCM63XX internal switch
chips.

Tested are BCM5325 trough MDIO, BCM53115 through SPI, and BCM6328.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35305
2013-01-23 10:12:33 +00:00
Jonas Gorski 3e998d9cf9 bcm63xx: move bcm63xx-spi into the kernel
The SPI driver is needed for supporting to boot from SPI flash on BCM6358
and BCM6368, and for SPI connected switches.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35304
2013-01-23 10:12:13 +00:00
Felix Fietkau 46e4246d61 kernel: remove 340-module_alloc_size_check.patch from linux 3.8, it is not necessary anymore
SVN-Revision: 35248
2013-01-19 19:14:37 +00:00
Gabor Juhos ed6d399f8d ramips: add profile and build image for the Tenda 3G300M
Factory image should be used to flash from
original firmware.

[juhosg: use the GENERIC_4M template]

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35246
2013-01-19 17:05:07 +00:00
Gabor Juhos 9891603eb5 ramips: add user-space support for the Tenda 3G300M
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35245
2013-01-19 17:05:06 +00:00
Gabor Juhos 7eff5d2df0 ramips: add kernel support for the Tenda 3G300M
Ralink RT3052F, 4MB flash, 32MB ram, one USB 2.0, two buttons
and seven leds.

Factory image should be used to flash from original firmware.

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35244
2013-01-19 17:05:03 +00:00
Gabor Juhos f7a943694f ramips: use MkImage for Hauppauge Broadway, Netcore NW718 and Tenda W306R V2.0
These targets need custom image names specified in the uImage header.
MkImage accepts an optional 4th argument to do exactly that. Reuse the
facility to generate factory images.

Compile-tested, the generated files inspected with "file" utility.

[juhosg:
 - keep the factory.bin images to avoid users confusion,
 - use GENERIC_4M template for the W306R V2.0
 - update commit log]

Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35243
2013-01-19 15:36:13 +00:00
Gabor Juhos 6aebe6a65d ramips: allow to override image name/suffix in GENERIC_{4,8}M macros
Sysupgrade/KRuImage and BuildFirmware/Generic macros
are changed as well.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35242
2013-01-19 15:36:11 +00:00
Gabor Juhos 60dde219d4 ramips: do not stop the build if some targets fail
This becomes crucial when you are using a generic profile to build an image
larger than 4M, e.g. for w502u.

Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35238
2013-01-19 08:51:45 +00:00
Jonas Gorski c3eeff807f generic: rtl8366_smi: only assign pvid if no pvid was set yet
Only assign a pvid if the current pvid is 0. Fixes using mixed tagged
and untagged traffic on a port and the untagged vlan isn't the last one
of which the port is a member.

Tested on RTL8366S and RTL8367R.

Fixes #8501.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35227
2013-01-18 15:19:11 +00:00
Jo-Philipp Wich 3a2cccda2e all targets: use numerically prefixed uci-defaults file names to better control order of execution
SVN-Revision: 35217
2013-01-18 12:42:53 +00:00
Gabor Juhos 0de21d9747 kernel: update linux 3.7 to 3.7.3
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35216
2013-01-18 11:44:42 +00:00
Florian Fainelli c8215775f3 mvebu: enable PCI in kernel configuration
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35214
2013-01-17 22:29:26 +00:00
Florian Fainelli 5e45a4344c mvebu: enable PCIe on Marvell Armada 370 Reference Design
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35213
2013-01-17 22:29:22 +00:00
Florian Fainelli cf9343ac86 mvebu: enable USB on Armada 370 Reference Design
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35212
2013-01-17 22:29:18 +00:00
Florian Fainelli 7e1e7063c2 mvebu: add preliminary support for PCI express
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35211
2013-01-17 22:29:13 +00:00
Florian Fainelli 29c21b973b mvebu: refresh patches
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35210
2013-01-17 22:28:58 +00:00
Florian Fainelli 28acc6588d kernel: refresh 3.8 patches
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35209
2013-01-17 22:28:53 +00:00
Florian Fainelli a286a55c6f mvebu: add board detection scripts
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35208
2013-01-17 22:28:48 +00:00
Florian Fainelli f7858466e2 mvebu: enable /proc/devicetree usage
This is going to be used for proper user-space board identification (ala
mcs814x).

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35207
2013-01-17 22:28:37 +00:00
Florian Fainelli 15b4681e3e mvebu: add default profile
Such that relevant kernel modules are selected (USB, I2C, SATA, RTC,
SDIO)

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35206
2013-01-17 22:28:33 +00:00
Jo-Philipp Wich 7399df1d69 x86: explicitely pass staging directory to grub-mkimage instead of relying on build time defaults (#12821)
SVN-Revision: 35200
2013-01-17 15:46:26 +00:00
Gabor Juhos 57f7408b8a generic: add EHCI|OHCI platform driver fix to 3.[36]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35194
2013-01-17 13:54:14 +00:00
Felix Fietkau 576aa2af0c ramips: enable BR6425N in kernel config
Though originally contained in the patch applied in r35020, the move to 3.7 in
r34845 lost the kernel .config option. Reintroduce it to config-3.7.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 35191
2013-01-17 09:39:44 +00:00
Florian Fainelli 05466923b8 mvebu: add support for EHCI controller
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35181
2013-01-15 19:55:50 +00:00
Florian Fainelli c53a347034 mvebu: add support for the Marvell Armada 370 Reference Design board
Keep the patches in sync with the upstream developments.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35179
2013-01-15 19:55:40 +00:00
Florian Fainelli 58f8c5d87a mvebu: enable SMP with SMP on UP enabled
The same kernel works ok for both Armada 370 (UP) and Armada XP (SMP)

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35178
2013-01-15 19:55:31 +00:00
Florian Fainelli fa1afc1fa9 mvebu: add support for RTC
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35176
2013-01-15 19:55:19 +00:00
Felix Fietkau b3b04e9fb1 kernel: port 203-kallsyms_uncompressed.patch and 305-mips_module_reloc.patch to 3.8
SVN-Revision: 35162
2013-01-14 18:55:36 +00:00
Gabor Juhos 78dc69e1d4 generic: remove EHCI platform driver fix from 3.8
It is not needed on 3.8.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35160
2013-01-14 17:53:55 +00:00
Gabor Juhos b035c594ae generic: add EHCI|OHCI platform driver fix from the cns21xx target
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35159
2013-01-14 17:47:23 +00:00
Florian Fainelli 1e103b2ecc target: enable XZ BCJ decompressor code after r35097
Required to actually be able to mount squashfs xz compressed
filesystems.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35156
2013-01-14 16:34:25 +00:00
Felix Fietkau e0e3509b5c kernel: add a config option for keeping the kallsyms table uncompressed, saving ~9kb kernel size after lzma on ar71xx
SVN-Revision: 35154
2013-01-14 16:08:18 +00:00
Felix Fietkau 1474359bd3 ar71xx: fix unaligned access in cls_u32
SVN-Revision: 35132
2013-01-13 16:48:23 +00:00
Felix Fietkau e67b6ee395 ar71xx: fix unaligned access in a few more places
SVN-Revision: 35130
2013-01-13 15:37:58 +00:00
Felix Fietkau b5bcbdfbb5 ar71xx: improve unaligned access patches, add a net_hdr_word() macro which assumes 2-byte aligned access and generates better code than {get,put}_unaligned_cpu32
SVN-Revision: 35129
2013-01-13 14:54:39 +00:00
Felix Fietkau 53e0ba49b9 ar71xx: avoid __packed define in the unaligned access hack patch, make the ipv6 address struct also 2-byte-aligned/packed
SVN-Revision: 35127
2013-01-13 13:06:09 +00:00
Felix Fietkau 5d55cece6e kernel: add back the mips module relocation patch
SVN-Revision: 35126
2013-01-13 12:23:42 +00:00
Felix Fietkau 764520975c ar71xx: add more cpu feature overrides, slightly reduces kernel size
SVN-Revision: 35125
2013-01-13 11:33:48 +00:00
Felix Fietkau 310724c14d ar71xx: extend the unaligned access hacks to a few more places that showed up in the new kernel
SVN-Revision: 35124
2013-01-13 11:33:44 +00:00
Hauke Mehrtens 2bf03f971d brcm47xx: BCMA - Update default IRQ assignment per upstream change
Update the default IRQ assignment for unrecognized devices per
the upstream change.

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 35121
2013-01-12 15:00:01 +00:00
Gabor Juhos 5d1ecfc26d refresh kernel configs with kconfig.pl
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35119
2013-01-12 12:29:55 +00:00
Gabor Juhos ef75e6c71a malta: remove 3.6 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35118
2013-01-12 12:29:53 +00:00
Gabor Juhos 3d057de4db malta: build lzma and gzip compressed uImages
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35117
2013-01-12 12:29:52 +00:00
Gabor Juhos df8a8f2515 adm5120: remove 3.6 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35116
2013-01-12 12:25:42 +00:00
Gabor Juhos d472567997 adm5120: switch to 3.7
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35115
2013-01-12 12:25:40 +00:00
Gabor Juhos eb2188c0e2 ar71xx: remove 3.6 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35114
2013-01-12 12:25:38 +00:00
Gabor Juhos fe86bc9370 ar71xx: switch to 3.7
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35113
2013-01-12 12:25:36 +00:00
Gabor Juhos ca882f230d mpc83xx: remove 3.6 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35112
2013-01-12 12:25:34 +00:00
Gabor Juhos eba037cd1f mpc83xx: switch to 3.7
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35111
2013-01-12 12:25:32 +00:00
Gabor Juhos ff2ce330a5 ramips: remove 3.6 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35110
2013-01-12 12:25:30 +00:00
Gabor Juhos d53f8c3ded ramips: switch to 3.7
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35109
2013-01-12 12:25:28 +00:00
Gabor Juhos f8f009ca43 rb532: remove 3.6 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35108
2013-01-12 12:25:26 +00:00
Gabor Juhos cd71dcdab7 rb532: switch to 3.7
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35107
2013-01-12 12:25:24 +00:00
Gabor Juhos 7098354885 ppc44x: remove 3.6 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35106
2013-01-12 12:25:21 +00:00
Gabor Juhos 83fccacec2 ppc44x: switch to 3.7
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35105
2013-01-12 12:25:20 +00:00
Gabor Juhos 9d3bae8f0e ppc40x: remove 3.6 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35104
2013-01-12 12:25:18 +00:00
Gabor Juhos 06fea75afb ppc40x: switch to 3.7
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35103
2013-01-12 12:25:16 +00:00
Gabor Juhos a51f602494 cns21xx: remove 3.6 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35102
2013-01-12 12:25:14 +00:00
Gabor Juhos bdc6ec4974 cns21xx: switch to 3.7
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35101
2013-01-12 12:25:12 +00:00
Gabor Juhos c19c30cefd kernel: update linux 3.7 to 3.7.2
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35100
2013-01-12 11:43:08 +00:00
Florian Fainelli ecf230710f mvebu: update to 3.8-rc3
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35086
2013-01-10 17:20:25 +00:00
Hauke Mehrtens 548cb59826 brcm47xx: update bgmac driver to the version in mainline kernel
SVN-Revision: 35083
2013-01-10 14:22:19 +00:00
Hauke Mehrtens 885eea1842 kernel: update bcma and ssb to master-2013-01-09 from wireless-testing
SVN-Revision: 35080
2013-01-10 14:05:18 +00:00
Imre Kaloz a2950fabd4 clean up PCI bus topology
This makes the PCI bus topology more standard for devices behind a bridge

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 35079
2013-01-10 13:25:12 +00:00
Imre Kaloz b63b970866 clean up PCI bus topology
This makes the PCI bus topology more standard for devices behind a bridge

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 35078
2013-01-10 13:23:33 +00:00
John Crispin 64910f4490 fixes USB reset on ARV7518
SVN-Revision: 35077
2013-01-10 06:44:58 +00:00
John Crispin 4834d09a3f fixes none-pci build
SVN-Revision: 35062
2013-01-09 09:04:09 +00:00
Florian Fainelli 25475a095e mvebu: add inital support for Marvell Armada XP/370 SoCs
This brings in the initial support for the Marvell Armada XP/370 SoCs.
Successfully tested on RD-A370-A1 and DB-MV784MP-GP boards the following
interfaces:

- Ethernet
- SDIO
- GPIOs
- SATA

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35058
2013-01-08 22:20:16 +00:00
Florian Fainelli 97acd10458 add support for 3.8 kernel
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35057
2013-01-08 22:20:11 +00:00
Florian Fainelli 9b601b79d0 add support for 3.8 kernel
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35056
2013-01-08 22:20:06 +00:00
Florian Fainelli 8dbed04ec9 kernel: add support for 3.8-rc2
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35055
2013-01-08 22:19:31 +00:00
Hauke Mehrtens 7b0af8193b brcm47xx: BGMAC Driver corrections
1) Fix what appears to be a logic error in bgmac_phy_advertise.

2) Fix bgmac_ioctl to use passed phy_id; needed for switch-robo
interface w/ the driver to work correctly.  I still have the issue
with the interface always being HD when the speed/duplex is set
manually (e.g., echo "100FD" > /proc/switch/eth0/port/N/media).

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 35052
2013-01-07 22:51:39 +00:00
Florian Fainelli 4ec57bdc06 update to 3.7
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35045
2013-01-07 18:16:36 +00:00
Gabor Juhos ba4de984b9 ar71xx: disable PHY_SWAP and PHY_ADDR_SWAP bits on TL-WR703N/MR3020/MR3040/MR11U boards
The PHY_SWAP and PHY_ADDR_SWAP bits are initialized
differently by different versions of the bootloader.
This leads to broken ethernet connection with OpenWrt
on some boards.

Turn both SWAP bits OFF on these boards to make it
consistent regardless of the bootloader used.

Based on a patch by Michel Stempin <michel.stempin@wanadoo.fr>.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35037
2013-01-07 14:30:37 +00:00
Gabor Juhos 251e4608b0 ar71xx: add missing Makefile entry to the 74HC153 GPIO patch
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35035
2013-01-07 14:14:41 +00:00
Felix Fietkau 5154270694 orion: debloat the kernel some more
SVN-Revision: 35023
2013-01-06 15:09:47 +00:00
Felix Fietkau 75657ff8a9 kernel: add missing config symbol
SVN-Revision: 35021
2013-01-06 15:09:39 +00:00
John Crispin f2f9332350 adds support for Edimax BR-6524N
fixes #12754

Signed-off-by: <rq@akl.lt>

SVN-Revision: 35020
2013-01-06 11:11:42 +00:00
John Crispin d5d2e8b4db missing underscore in 3.3 regmap patch
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 35018
2013-01-06 10:01:53 +00:00
Felix Fietkau 2e8409cce3 kernel: port the regmap fix to 3.6 (#12749), refresh patches for other versions
SVN-Revision: 35016
2013-01-05 13:33:44 +00:00
John Crispin e6aac19237 fix regmap debloat patch
SVN-Revision: 35015
2013-01-05 00:20:05 +00:00
Jonas Gorski e952eaa112 bcm63xx: Add Huawei HG556a support
Add Huawei EchoLife HG556a support.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo@openwrt.org: added some code style fixes]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35011
2013-01-04 14:47:57 +00:00
Jonas Gorski 0e58173fa5 bcm63xx: Fix caldata partition mtd patch
Allow bcm63xxpart to receive a caldata offset if calibration data is contained in flash.

Tested-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>

SVN-Revision: 35010
2013-01-04 14:47:50 +00:00
Jonas Gorski 10fc07daac bcm63xx: remove 3.3 support
3.6 is tested enough to be considered stable.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35009
2013-01-04 14:47:43 +00:00
Felix Fietkau 96f3911981 kernel: move regmap bloat out of the kernel image if it is only being used in modules
SVN-Revision: 34999
2013-01-03 18:39:50 +00:00
Hauke Mehrtens a105eea1a1 brcm47xx: various fixes and code cleanups for irq code
This is based on a patch send by Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 34997
2013-01-03 16:56:54 +00:00
Hauke Mehrtens 4443997fd8 brcm47xx: add bgmac driver
This Ethernet driver is in early development stage and still has some problems.
This was working on my bcm4716 based device.

Thanks to Rafał Miłecki <zajec5@gmail.com> for writing this driver.

SVN-Revision: 34995
2013-01-03 02:05:22 +00:00
Hauke Mehrtens 8f6bdcffa1 brcm47xx: build b44 as a module
SVN-Revision: 34994
2013-01-03 02:00:25 +00:00
Hauke Mehrtens 22d62d311a brcm47xx: run ifup before starting the switch
In addition check_module is not needed, nobody checks the return value.

SVN-Revision: 34993
2013-01-03 01:59:43 +00:00
Hauke Mehrtens 97b2b601c7 brcm47xx: BCMA - IRQ Update - Fix IRQ Flag for I2S Core
Adjust the IRQ Flag value from 8 to 7 for I2S Core for BCM4716 and
BCM4748 (per the Broadcom SDK).  IRQ Flag values greater than 7 are
ignored when setting the interrupt masks.

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 34990
2013-01-03 01:56:13 +00:00
Hauke Mehrtens f74e847301 brcm47xx: improve IRQ handling for bcma based devices
This was party inspirited by patches send by Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 34989
2013-01-03 01:55:34 +00:00
Hauke Mehrtens 25afeba608 brcm47xx: add a new version of the nvram rewrite patch
This is the version like it was send for mainline inclusion.

SVN-Revision: 34988
2013-01-03 01:53:30 +00:00
Hauke Mehrtens edc7ab525f brcm47xx: move patches already in the mainline kernel to the front
SVN-Revision: 34987
2013-01-03 01:51:31 +00:00
Hauke Mehrtens 76c767f122 brcm47xx: remove support for kernel version 3.3
SVN-Revision: 34986
2013-01-03 01:48:43 +00:00
Jo-Philipp Wich 7a73c2f91f generic: add some missing kernel config symbols spotted on x86
SVN-Revision: 34981
2013-01-02 19:10:24 +00:00
Felix Fietkau 741f6ba7ef x86: fix typo in alix2/net5501 default packages
SVN-Revision: 34972
2013-01-02 16:09:23 +00:00
John Crispin 569bbe4970 rt5350 switch support fix
RT5350 frame engine need reset frame engine and embedded switch together.

Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru>

SVN-Revision: 34969
2013-01-02 11:28:21 +00:00
Gabor Juhos 373b0b9ad1 generic: fix UBIFS build error if XZ compression is disabled
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34959
2013-01-02 08:53:07 +00:00
Gabor Juhos d91117459c adm5120: add support for 3.7
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34954
2013-01-01 13:15:49 +00:00
Gabor Juhos f0520f1714 adm5120: nuke 3.3 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34953
2013-01-01 13:15:44 +00:00
Gabor Juhos b4315df8e1 adm5120: switch to 3.6
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34952
2013-01-01 13:15:41 +00:00
Gabor Juhos edd36342e5 adm5120: add support for 3.6
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34951
2013-01-01 13:15:36 +00:00
Gabor Juhos 92cd48e9ea adm5120: remove NAND_NO_AUTOINCR flag from rb1xx.c
Also add a compatibility patch for 3.3.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34950
2013-01-01 13:15:30 +00:00
Gabor Juhos 03e09078dc adm5120: use mtd_read helper in trxsplit.c
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34949
2013-01-01 13:15:20 +00:00
Gabor Juhos e1b13e15b2 adm5120: don't include asm/system.h in adm5120-hcd.c
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34948
2013-01-01 13:15:16 +00:00
Gabor Juhos cbe5d664e1 generic: add missing symbol for 3.7
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34947
2013-01-01 13:15:11 +00:00
Gabor Juhos e1965a1d1a ar71xx: register the NAND flash controller device on the AP135/136 boards
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34946
2013-01-01 13:10:41 +00:00
Gabor Juhos 66efec6783 ar71xx: allow to register the NAND flash controller on the QCA955x
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34945
2013-01-01 13:10:36 +00:00
Gabor Juhos 2c77e5d7b3 ar71xxx: allow to select ATH79_DEV_NFC for QCA955x
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34944
2013-01-01 13:10:34 +00:00
Gabor Juhos d8446d65fe ar71xxx: allow to build the ar934x_nfc driver for QCA955x
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34943
2013-01-01 13:10:29 +00:00
Gabor Juhos 93c322cacc ar71xx: fix NAND controller base for QCA955x SoCs
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34942
2013-01-01 13:10:26 +00:00
Gabor Juhos b57cc9a538 ar71xx: fold AP135 patch
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34941
2013-01-01 13:10:22 +00:00
John Crispin 624eb36fff adds missing symbol
SVN-Revision: 34939
2012-12-30 21:31:10 +00:00
John Crispin ce57efa3ea fixes usb port on arv 4518
SVN-Revision: 34935
2012-12-30 12:38:40 +00:00
Gabor Juhos fb07876f25 ramips: rt305x: fix garbled name in mach-mzk-w300nh2.c
Signed-off-by: Samir Ibradžić <sibradzic@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34934
2012-12-30 08:23:48 +00:00
Gabor Juhos 6708d68c24 ramips: build firmware image for the Planex MZK-W300NH2 Router
Signed-off-by: Samir Ibradžić <sibradzic@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3077/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34927
2012-12-29 17:50:40 +00:00
Gabor Juhos 8b1ac2ae37 ramips: add user-space support for the Planex MZK-W300NH2 Router
Signed-off-by: Samir Ibradžić <sibradzic@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3077/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34926
2012-12-29 17:50:38 +00:00
Gabor Juhos d6d06aceb0 ramips: rt305x: add kernel support for the Planex MZK-W300NH2 Router
This is a Japanese market router, for details check
http://www.planex.co.jp/product/router/mzk-w300nh2/. It has only 16MB
RAM, but base OpenWRT install worked fine for days without issues.
Even an image with built-in Luci worked, but don't expect smooth
experience, due to the lack of RAM. Wifi was not extensively tested,
but seems it is working. GPIO LEDs & buttons, factory flash image and
switch config are confirmed working. Tested against revision 34882 +
this patch.

[juhosg: move user-space support and image generation changes into
separate patches]

Signed-off-by: Samir Ibradžić <sibradzic@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3077/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34925
2012-12-29 17:50:35 +00:00
Gabor Juhos 76537041eb ramips: build image for Airlive AIR3GII
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/2913/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34924
2012-12-29 17:50:34 +00:00
Gabor Juhos 3aad9b4c9b ramips: add user-space support for Airlive AIR3GII
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/2913/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34923
2012-12-29 17:50:32 +00:00
Gabor Juhos 3fcb8bb0dd ramips: rt305x: add kernel support for AirLive AIR3GII
AirLive AIR3GII is Ralink RT5350F based device with
100Mbps switch, USB port, 4MB flash and 32MB ram.

Works: ethernet (LAN & WAN), wps button, led, USB, sysupgrade
Does not work: wifi (chip RT5350), reset button

[   13.390000] phy0 -> rt2800_init_eeprom: Error - Invalid RT chipset 0x5350 detected.
[   13.400000] phy0 -> rt2x00lib_probe_dev: Error - Failed to allocate device.

Other problem: LAN leds is reverse (lights when not cable
connected and vice versa)

[juhosg: move user-space support and image generation changes into
separate patches]

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/2913/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34922
2012-12-29 17:50:28 +00:00
Gabor Juhos 87271e9f28 ar71xx: add support for 3.7
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34920
2012-12-29 16:02:31 +00:00
Gabor Juhos a3a6e0f039 ar71xx: Build the AP135 images
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34919
2012-12-29 16:02:28 +00:00
Gabor Juhos dddf05bde2 ar71xx: Add userspace support for AP135
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34918
2012-12-29 16:02:27 +00:00
Gabor Juhos 1a379c5112 ar71xx: Add support for AP135
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34917
2012-12-29 16:02:24 +00:00
Gabor Juhos c6580f64b8 ar71xx: use a backported patch to fix AR933x UART baud rate calculation
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34915
2012-12-29 13:52:38 +00:00
Felix Fietkau 348dc70c8c ar71xx: change the unaligned access hack to assume an alignment of 2 bytes, slightly improves performance and code size
SVN-Revision: 34912
2012-12-28 21:30:24 +00:00
Felix Fietkau 41a039f464 mips: use -mno-branch-likely for kernel and userspace, saves ~11k kernel size after lzma and ~12k squashfs size in the default configuration
SVN-Revision: 34909
2012-12-28 19:17:19 +00:00
Felix Fietkau 9bb8b9fadb kernel: remove the cisco SIP NAT patch, at least on 3.6 it crashes
SVN-Revision: 34901
2012-12-27 22:59:51 +00:00
Hauke Mehrtens 981b7410f8 brcm47xx: bcma: correct M25P32 serial flash ID
Thank you Rafał Miłecki.

SVN-Revision: 34900
2012-12-27 19:18:40 +00:00
Gabor Juhos 386c37b4c2 mpc83xx: add support for 3.7
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34892
2012-12-26 10:40:54 +00:00
Gabor Juhos f67a7a479e mpc83xx: nuke 3.3 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34891
2012-12-26 10:40:51 +00:00
Gabor Juhos 36af140fe4 mpc83xx: switch to 3.6.11
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34890
2012-12-26 10:40:50 +00:00
Gabor Juhos c4c8307ca1 mpc83xx: add support for 3.6
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34889
2012-12-26 10:40:48 +00:00
Gabor Juhos e537b8a093 mpc83xx: create package for the rbppc_cf module
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34888
2012-12-26 10:40:47 +00:00
Gabor Juhos fff75fe5b6 generic: more missing symbols for 3.{6,7}
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34887
2012-12-26 10:40:41 +00:00
Gabor Juhos f5b1cba606 ar71xx: build image for the AP136-020
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34886
2012-12-26 09:50:37 +00:00
Gabor Juhos f3f05d86fe ar71xx: add user-space support for AP136-020
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34885
2012-12-26 09:50:36 +00:00
Gabor Juhos ed1889db33 ar71xx: add kernel support for the AP136-020 board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34884
2012-12-26 09:50:34 +00:00
Gabor Juhos c887a7fe4e ar71xx: rename AP136 to AP136-010
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34883
2012-12-26 09:50:31 +00:00
Gabor Juhos f8b4dfd172 ar71xx: dynamically set AR8327's PAD configuration on AP136
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34882
2012-12-25 18:45:32 +00:00
Gabor Juhos d4b4c7d102 generic: ar8216: add sgmii_delay_en field to ar8327_platform_data
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34881
2012-12-25 18:45:31 +00:00
Gabor Juhos 1dc2b6e8fa ar71xx: ag71xx: show PHY interface mode in dmesg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34880
2012-12-25 18:45:29 +00:00
Gabor Juhos 69da894432 ramips: fix ASUS WL-330N3G MAC address
The ASUS WL-330N and WL-330N3G has the MAC address stored at
offset 4, not 40. This is verified by reading original ASUS
firmware GPL_WL-330N3G_source.1028/user/rc/common_ex.c and
GPL_WL-330N_source.1021/user/rc/common_ex.c.

Tested on WL-330N3G, it now gets the same MAC as is printed on
the label on the router.

Signed-off-by: Jan Kardell <jan.kardell@arkub.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34877
2012-12-24 06:52:41 +00:00
Gabor Juhos c5a36f13f0 ramips: fix wifi EEPROM extraction on DIR-615-Dx models
Patch from #12636.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34876
2012-12-24 06:52:38 +00:00
Imre Kaloz 2c05915b24 add nol2x0 cmdline to disable l2x0 cache
L2 cache via L2X0 cache controller available on some ARM boards can
provide a performance boost in some situations but decrease performance
in others.  This adds a kernel cmdline to disable L2X0 for cns3xxx based
boards.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 34874
2012-12-23 18:53:38 +00:00
Gabor Juhos c3cb63661f generic: ar8216: don't use 0 as default VID on AR8327
VID0 is reserved for priority-tagged packets.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34862
2012-12-22 18:30:04 +00:00
Gabor Juhos fa9d06c7f4 generic: more missing symbols for 3.{6,7}
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34861
2012-12-22 17:22:41 +00:00
Gabor Juhos 8105c6badd ramips: unify eeprom file name for the built-in wireless MAC
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34860
2012-12-22 16:09:03 +00:00
Gabor Juhos c81b4475c9 ramips: rt3883: fix build error
The cpuport_cfg field has been renamed to port0_cfg.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34859
2012-12-22 13:50:47 +00:00
Gabor Juhos 64d31e6c6b ar71xx: register the second ethernet interface on the AP136
Also fix the default network configuration
according to the new setup.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34854
2012-12-22 12:12:50 +00:00
Gabor Juhos 5dec87afef ar71xx: fix ethernet device registration for QCA9558
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34853
2012-12-22 12:12:48 +00:00
Gabor Juhos 84a7051cef ar71xx: rename QCA9558 ETH_CFG bit defines
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34852
2012-12-22 12:12:46 +00:00
Gabor Juhos 4085a5773d ar71xx: fixup allowed PHY interface types for QCA9558
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34851
2012-12-22 12:12:44 +00:00
Gabor Juhos f01a786825 ar71xx: don't assign any MII bus device on QCA9558 by default
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34850
2012-12-22 12:12:43 +00:00
Gabor Juhos 9edcd9d3a3 ar71xx: ag71xx: fix mii_bus_dev sanity check
The mii_bus device is not required if phy_mask is zero.
The driver will use a fixed connection if it is not
specified.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34849
2012-12-22 12:12:41 +00:00
Gabor Juhos ad0f03d250 ar71xx: ag71xx: don't start/stop built-in switch w/o mii_bus_dev
Trying to do that causes a NULL pointer dereference:

CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 801d170c, ra == 801d18d4
Oops[#1]:
Cpu 0
$ 0   : 00000000 00000000 00000000 00000001
$ 4   : 00000000 802e6390 ffff8f45 00000001
$ 8   : 804b5360 ffffff80 802f93bc 00000000
$12   : 802f93e8 00000000 00000000 00000000
$16   : 8381aba0 8381aba0 00000000 00000000
$20   : 8295eff0 00000032 80000000 004101b8
$24   : 00000000 777265b0
$28   : 82936000 82937cf0 00420000 801d18d4
Hi    : 00000000
Lo    : 00000001
epc   : 801d170c ar7240sw_reset+0x1c/0x19c
    Tainted: G           O
ra    : 801d18d4 ag71xx_ar7240_start+0x28/0xc0
Status: 1100fc03    KERNEL EXL IE
Cause : 00800008
BadVA : 00000000
PrId  : 00019750 (MIPS 74Kc)
Modules linked in: ath79_wdt ohci_hcd ledtrig_usbdev ledtrig_netdev
nf_nat_irc nf_nat_ftp nf_conntrack_irc nf_conntrack_ftp
 ipt_MASQUERADE iptable_nat nf_nat pppoe xt_conntrack xt_CT xt_NOTRACK
iptable_raw xt_state nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack
ehci_hcd pppox ipt_REJECT xt_TCPMSS xt_LOG xt_comment xt_multiport
xt_mac xt_limit iptable_mangle iptable_filter ip_tables xt_tcpudp x_tab
les ppp_async ppp_generic slhc ath9k(O) ath9k_common(O) ath9k_hw(O)
ath(O) mac80211(O) usbcore usb_common nls_base crc_ccitt cfg80211(O) c
ompat(O) arc4 aes_generic crypto_blkcipher cryptomgr aead crypto_hash
crypto_algapi ledtrig_timer ledtrig_default_on leds_gpio gpio_button
_hotplug(O)
Process netifd (pid: 677, threadinfo=82936000, task=82cbe140, tls=77803750)
Stack : ffffffff 80087900 00000001 82937d74 8381aba0 8381aba0 00000000 00000000
        8295eff0 801d18d4 8295eff0 801fa4a4 00420000 80092158 00000002 8381aba0
        8381a800 00000000 00000080 801cf900 8027e720 00000000 00000000 8009223c
        8381a800 8381a82c 8027e720 00000000 00000000 7f9d14f0 00420000 801ec08c
        8381a800 801ebfb0 33000000 82937e30 00000001 8381a800 00001003 801ec348
        ...
Call Trace:
[<801d170c>] ar7240sw_reset+0x1c/0x19c
[<801d18d4>] ag71xx_ar7240_start+0x28/0xc0
[<801cf900>] ag71xx_open+0x1d0/0x258
[<801ec08c>] __dev_open+0xcc/0x130
[<801ec348>] __dev_change_flags+0xc0/0x160
[<801ec490>] dev_change_flags+0x20/0x6c
[<801ec5c8>] dev_ifsioc+0xec/0x348
[<801ecdb8>] dev_ioctl+0x594/0x67c
[<800ec00c>] do_vfs_ioctl+0x598/0x5ec
[<800ec0b0>] sys_ioctl+0x50/0x90
[<8006a3c4>] stack_done+0x20/0x40
Code: afbf0024  afb40020  afb10014 <8c910000> 00809021  24100104 24130704  8e440000  02002821

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34848
2012-12-22 12:12:40 +00:00
Gabor Juhos 3931c9524c generic: ar8316: allow to configure port 6 via platform data on AR8327
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34847
2012-12-22 12:12:37 +00:00
Gabor Juhos a0b31f97bb generic: ar8216: rename cpuport_cfg to port0_cfg in ar8327_platform_data
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34846
2012-12-22 12:12:35 +00:00
Gabor Juhos b44cdcde8e ramips: add support for 3.7
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34845
2012-12-22 12:11:13 +00:00
Gabor Juhos b81667cb23 ramips: convert to use {e,o}hci-platform driver
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34843
2012-12-22 12:11:08 +00:00
Gabor Juhos c0e1a6f342 generic/3.6: add platform specific power callbacks to {e,o}hci_platform drivers
Backport of upstream commits:

86e4cb35f2260374df4139c2352afe7fe247cb60 usb: host: ehci-platform: BUG_ON() to WARN_ON() on probe
b6dd245c4594482d46507a0bfd100439be367952 usb: host: ohci-platform: BUG_ON() to WARN_ON() on probe
04216bedafb1b3992a6c2b7f1518281d2ba5fc7b usb: host: ehci-platform: add platform specific power callback
e4d37aeb373a5edceecc1dadc76fabbe8bc18e44 usb: host: ohci-platform: addplatform specific power callback

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34842
2012-12-22 12:11:06 +00:00
John Crispin efe3225e2b ar9 did not load atm driver properly
SVN-Revision: 34840
2012-12-22 10:16:52 +00:00
John Crispin 379cd6e25e dont use input layer for gpio buttons
SVN-Revision: 34839
2012-12-21 20:04:20 +00:00
John Crispin 90a3761b0b default switch setup for WBMR
SVN-Revision: 34838
2012-12-21 20:04:12 +00:00
John Crispin ae0b9ff1ce Setting the MDC clock to 2.5MHz and changing the mii mode to rgmii seems to fix the communication issues with the ar8316 switch. (ticket #11143)
Tested only on the wbmr-hp-g300h, could affect/break other devices.

Signed-off-by: Sebastian Mayr <sebastian.mayr@student.uibk.ac.at>

SVN-Revision: 34837
2012-12-21 20:04:04 +00:00
John Crispin 9818a1f00b adds script to set wps info on boards with a wps button
SVN-Revision: 34836
2012-12-21 20:03:59 +00:00
John Crispin 3134205dfd minor tweaks to WBMR image
SVN-Revision: 34835
2012-12-21 20:03:54 +00:00
John Crispin f4b2439554 add missing PHY_BASIC_FEATURES to 100mbit phys
SVN-Revision: 34826
2012-12-21 14:41:35 +00:00
John Crispin 861bf6af49 fix typo inside fritz3370 devicetree file
SVN-Revision: 34825
2012-12-21 14:41:30 +00:00
John Crispin 54c096527a more devicetree fixes
SVN-Revision: 34824
2012-12-21 13:47:55 +00:00
John Crispin 59cc6d9ddd improve button handling
SVN-Revision: 34823
2012-12-21 13:47:50 +00:00
John Crispin 7ce4c81647 add phy-reset gpio handling to xrx200-net
SVN-Revision: 34822
2012-12-21 13:47:44 +00:00
John Crispin 42d668174e add more lantiq phy ids based on daniels uboot code
SVN-Revision: 34821
2012-12-21 13:47:40 +00:00
John Crispin 16c5946f8b refresh patch and install v1.1 gphy blobs
SVN-Revision: 34820
2012-12-21 13:47:35 +00:00
John Crispin 123343d424 make to rtl8366_smi of binding use gpio_is_valid
SVN-Revision: 34816
2012-12-21 13:47:14 +00:00
Gabor Juhos 840d0d246c kernel: add solos-pci update for 3.3
Same patches that I just merged for 3.6 and 3.7, except with one
additional fix that went into v3.4 that needed to be included.

Submitted more for the benefit of the AA branch than for trunk.

[juhosg: refresh the patch with quilt]

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34813
2012-12-21 10:38:33 +00:00
Gabor Juhos 04ce7e213f rb532: add support for 3.7
Compile tested only.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34812
2012-12-20 19:25:43 +00:00
Gabor Juhos e1b5eeeaa4 ramips: Add USB support for DAP-1350 platform.
It seems to work as intended, but only lightly tested.

Patch-by: Bryan Steele <brynet@gmail.com>
SIgned-off-by: Gabor Juhos <juhsog@openwrt.org>

SVN-Revision: 34811
2012-12-20 19:17:17 +00:00
Gabor Juhos 311d921e12 rb532: nuke 3.3 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34810
2012-12-20 19:09:03 +00:00
Gabor Juhos befb29c7a3 rb532: switch to 3.6.11
Compile tested only. The target is broken anyway,
so the kernel version does not matter too much.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34809
2012-12-20 19:09:01 +00:00
Gabor Juhos dbcb4708fb rb532: add support for 3.6
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34808
2012-12-20 19:09:00 +00:00
Gabor Juhos 5399d00ae6 ppc44x: add support for 3.7
Compile tested only.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34807
2012-12-20 18:11:22 +00:00
Gabor Juhos 2d6a41cf5d kernel: add solos-pci patches from 3.8 for new hardware
[juhosg: refresh patches with quilt, skip the patch for 3.3]

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34806
2012-12-20 17:14:57 +00:00
Gabor Juhos d21275a36b linux: add missing symbols for 3.{6,7}
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34805
2012-12-20 17:14:56 +00:00
Gabor Juhos a81fa11243 cns21xx: add support for 3.7
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34801
2012-12-20 14:51:17 +00:00
Gabor Juhos 1d7ba088e6 ppc40x: add support for 3.7
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34800
2012-12-20 14:51:16 +00:00
Gabor Juhos 708c8c3d0d ppc40x: add missing NULL terminator to avoid boot panic on PPC40x
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34799
2012-12-20 14:37:39 +00:00
Gabor Juhos e108cb91c0 ar71xx: rename fix-ar933x-reset patch
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34798
2012-12-20 14:13:16 +00:00
Gabor Juhos 5da1d7daa5 ppc40x/44x: disable SWIOTLB
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34797
2012-12-20 14:09:39 +00:00
John Crispin 1b0aaff246 adds a fix for ar8216 mii detection on etop driver
SVN-Revision: 34795
2012-12-19 16:20:24 +00:00
Mirko Vogt 4d4b2d3ced merge /lib/functions/boot.sh and /lib/functions.sh
SVN-Revision: 34794
2012-12-19 16:07:53 +00:00
Mirko Vogt e34a4e0c7b Do not use deprecated path to functions.sh (/etc/functions.sh -> /lib/functions.sh)
SVN-Revision: 34793
2012-12-19 16:07:50 +00:00
Mirko Vogt 439a869090 Do not overload mount-call - trying to reduce confusion
The behaviour of calling 'mount' differed depending on whether it called
the busybox-mount, the mount of util-linux, the mount defined in
/lib/functions.sh and /lib/functions/boot.sh

/etc/preinit even included /lib/functions.sh and /lib/functions/boot.sh,
both re-defining 'mount'.

SVN-Revision: 34792
2012-12-19 16:07:46 +00:00
John Crispin 687920ba3e minor basefiles fixes
SVN-Revision: 34790
2012-12-19 15:17:42 +00:00
John Crispin e472671bde fix gptu clocks
SVN-Revision: 34789
2012-12-19 15:17:31 +00:00
John Crispin 5495ffbfdf more board file fixes
SVN-Revision: 34788
2012-12-19 15:17:11 +00:00
Gabor Juhos c0515a5a8b ppc44x: nuke 3.3 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34787
2012-12-19 09:45:43 +00:00
Gabor Juhos aedd9433fa ppc44x: switch to 3.6.11
Compile tested only. The target is broken anyway,
so the kernel version does not matter too much.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34786
2012-12-19 09:45:42 +00:00
Gabor Juhos 982d3e3f7a ppc44x: add support for 3.6
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34785
2012-12-19 09:45:40 +00:00
Gabor Juhos 5f82aa4d15 ar71xx: merge machine patches
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34783
2012-12-19 08:50:45 +00:00
Gabor Juhos cf99770800 ar71xx: build image for the TL-MR3220 v2
Based on the following patch:
http://patchwork.openwrt.org/patch/3043/

[juhosg: reorder MR3220 MultiProfile entry]

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34782
2012-12-19 08:50:44 +00:00
Gabor Juhos b1b7aa674e ar71xx: add user-space support for the TL-MR3220 v2
Based on the following patch:
http://patchwork.openwrt.org/patch/3043/

[juhosg: add uci-defaults/network support]

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34780
2012-12-19 08:50:41 +00:00
Gabor Juhos 0767605d17 ar71xx: add kernel support for the TL-MR3220 v2
Based on the following patch:
http://patchwork.openwrt.org/patch/3043/

[juhosg:
 - remove custom LED and button arrays
 - use separate machine specific patch
 - update Kconfig]

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34779
2012-12-19 08:50:35 +00:00
John Crispin 4aa8272c8b fix gptu patch - tapi should now load
SVN-Revision: 34777
2012-12-18 20:12:57 +00:00
Gabor Juhos c62586382a ppc40x: nuke 3.3 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34776
2012-12-18 20:10:37 +00:00
Gabor Juhos 7d0cf4f7a0 ppc40x: switch to 3.6.11
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34775
2012-12-18 20:10:34 +00:00
Gabor Juhos 565cdf58b5 ppc40x: add support for 3.6
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34774
2012-12-18 20:10:31 +00:00
Gabor Juhos 2143de1a3d generic: disable crashlog on ppc
It causes panic on boot:

[    0.194287] __ioremap(): phys addr 0x1f00000 is RAM lr crashlog_init_fs
[    0.200902] Unable to handle kernel paging request for data at address 0x00000000
[    0.208347] Faulting instruction address: 0xc026cb10
[    0.213282] Oops: Kernel access of bad area, sig: 11 [#1]
[    0.218586] PowerPC 40x Platform
[    0.221783] Modules linked in:
[    0.224817] NIP: c026cb10 LR: c026cb10 CTR: c000c1b8
[    0.229745] REGS: c1825ed0 TRAP: 0300   Not tainted  (3.6.11)
[    0.235435] MSR: 00029030 <EE,ME,IR,DR>  CR: 42004082  XER: 00000000
[    0.241745] DEAR: 00000000, ESR: 00000000
[    0.245724] TASK = c181e000[1] 'swapper' THREAD: c1824000
GPR00: c026cb10 c1825f80 c181e000 00000000 0000004b 0000004b c029a4dd 6f675f69
GPR08: 6e69745f c0290440 00000000 00000000 22004084 00000000 01ffc400 004011f8
GPR16: 00000001 ffffffff 00000000 007fff00 01ff6120 01f94298 01fff258 c02631b8
GPR24: c02604bc 00000019 c02a0000 c02a0000 c027c644 00000000 c02c0000 c02bd388
[    0.279089] NIP [c026cb10] crashlog_init_fs+0x30/0xe0
[    0.284095] LR [c026cb10] crashlog_init_fs+0x30/0xe0
[    0.289000] Call Trace:
[    0.291442] [c1825f80] [c026cb10] crashlog_init_fs+0x30/0xe0 (unreliable)
[    0.298185] [c1825f90] [c00023fc] do_one_initcall+0xdc/0x1c8
[    0.303812] [c1825fc0] [c02638c4] kernel_init+0x110/0x1a4
[    0.309154] [c1825ff0] [c000ad4c] kernel_thread+0x4c/0x68
[    0.314488] Instruction dump:
[    0.317429] 9421fff0 7c0802a6 bfc10008 3fc0c02c 90010014 3bfed388 3800fff4 807f0004
[    0.325117] 2f830000 41be00a4 38804000 4bda2809 <81630000> 7c691b78 907ed388 6d605e11

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34773
2012-12-18 20:10:02 +00:00
Gabor Juhos 1e8ab43834 generic: add missing symbols for 3.{6,7}
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34772
2012-12-18 20:09:58 +00:00
John Crispin af48676b28 update to 3.7.1
SVN-Revision: 34771
2012-12-18 19:32:01 +00:00
Gabor Juhos 1080f68b2b etrax: R.I.P.
It is broken and it is not maintained by anyone since long time.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34768
2012-12-18 17:54:04 +00:00
Gabor Juhos b86e82e5cc s3c2442: R.I.P.
It is broken and it is not maintained by anyone since long time.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34767
2012-12-18 17:54:02 +00:00
Gabor Juhos db831511d2 goldfish: R.I.P.
It is broken and it is not maintained by anyone since long time.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34766
2012-12-18 17:53:53 +00:00
Gabor Juhos 979bc5536d ps3: R.I.P.
It is broken and it is not maintained by anyone since long time.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34765
2012-12-18 17:53:51 +00:00
Gabor Juhos 6f794eeedb pxcab: R.I.P.
It is broken and it is not maintained by anyone since long time.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34764
2012-12-18 17:53:17 +00:00
Gabor Juhos 029553b698 refresh kernel configs with kconfig.pl
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34763
2012-12-18 15:54:15 +00:00
Gabor Juhos 7ff7340304 geos: add missing config-3.7 file
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34762
2012-12-18 15:51:45 +00:00
Gabor Juhos 149534f3ed ar71xx: image: add OpenMesh profile
It allows to build firmware images for all OpenMesh
products in one step.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34761
2012-12-18 15:16:05 +00:00
Gabor Juhos 8903f8581b kernel: update linux 3.7 to 3.7.1
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34760
2012-12-18 15:13:31 +00:00
Gabor Juhos b2caa5db24 cns21xx: remove broken flag
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34759
2012-12-18 14:51:58 +00:00
Gabor Juhos 39796c434c cns21xx: nuke 3.3 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34758
2012-12-18 14:51:58 +00:00
Gabor Juhos 991ebc29d7 cns21xx: switch to 3.6.11
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34757
2012-12-18 14:51:57 +00:00
Gabor Juhos 9e1a54296a cns21xx: fix build errors on 3.6
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34756
2012-12-18 14:51:55 +00:00
Gabor Juhos 5a680f1cbf geos: update to 3.7
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34755
2012-12-18 14:50:48 +00:00
Gabor Juhos 9b15d3e22a kernel: add 3.7 support for x86
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34754
2012-12-18 14:50:47 +00:00
Gabor Juhos d537f76ddd kernel: Fix Cisco SIP NAT patch to build with 3.7
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34753
2012-12-18 14:50:45 +00:00
Gabor Juhos 0c64d55b14 kernel: add missing config option BATTERY_DS2781 for 3.7
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34749
2012-12-18 14:50:41 +00:00
Gabor Juhos 44b9898251 kernel: update linux 3.6 to 3.6.11
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34748
2012-12-18 14:41:16 +00:00
Gabor Juhos fe8efb72ca ramips: nuke 3.3 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34744
2012-12-17 22:28:11 +00:00
Gabor Juhos fc0da6852e ar71xx: nuke 3.3 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34743
2012-12-17 22:28:09 +00:00
Felix Fietkau 1bdea42662 kernel: fix a warning in the O_DIRECT debloat patch
SVN-Revision: 34740
2012-12-17 20:55:49 +00:00
Felix Fietkau 2bda7a5b41 kernel: add some debloat patches, strip down procfs and make O_DIRECT support optional, saves ~15K after lzma on MIPS
SVN-Revision: 34737
2012-12-17 15:11:39 +00:00
Gabor Juhos d153bdbba9 generic: rtl836x: fix compiler warnings
CC      drivers/net/phy/rtl8366rb.o
In file included from drivers/net/phy/rtl8366s.c:16:0:
include/linux/of_platform.h:106:13: warning: 'struct device' declared inside parameter list [enabled by default]
include/linux/of_platform.h:106:13: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default]
drivers/net/phy/rtl8366s.c: In function 'rtl8366s_probe':
drivers/net/phy/rtl8366s.c:1094:2: warning: label 'err_out' defined but not used [-Wunused-label]
drivers/net/phy/rtl8366s.c:1055:32: warning: unused variable 'pdata'[-Wunused-variable]
  CC      drivers/net/phy/rtl8366rb.o
In file included from drivers/net/phy/rtl8366rb.c:17:0:
include/linux/of_platform.h:106:13: warning: 'struct device' declared inside parameter list [enabled by default]
include/linux/of_platform.h:106:13: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default]
drivers/net/phy/rtl8366rb.c: In function 'rtl8366rb_probe':
drivers/net/phy/rtl8366rb.c:1214:2: warning: label 'err_out' defined but not used [-Wunused-label]
drivers/net/phy/rtl8366rb.c:1175:32: warning: unused variable 'pdata'[-Wunused-variable]
  CC      drivers/net/phy/rtl8367.o
In file included from drivers/net/phy/rtl8367.c:15:0:
include/linux/of_platform.h:106:13: warning: 'struct device' declared inside parameter list [enabled by default]
include/linux/of_platform.h:106:13: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default]
drivers/net/phy/rtl8367.c: In function 'rtl8367_probe':
drivers/net/phy/rtl8367.c:1712:2: warning: label 'err_out' defined but not used [-Wunused-label]
drivers/net/phy/rtl8367.c:1677:32: warning: unused variable 'pdata' [-Wunused-variable]
  CC      drivers/net/phy/rtl8367b.o
In file included from drivers/net/phy/rtl8367b.c:15:0:
include/linux/of_platform.h:106:13: warning: 'struct device' declared inside parameter list [enabled by default]
include/linux/of_platform.h:106:13: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default]
drivers/net/phy/rtl8367b.c: In function 'rtl8367b_probe':
drivers/net/phy/rtl8367b.c:1494:2: warning: label 'err_out' defined but not used [-Wunused-label]
drivers/net/phy/rtl8367b.c:1459:32: warning: unused variable 'pdata' [-Wunused-variable]

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34731
2012-12-17 13:02:18 +00:00
Gabor Juhos 61d715505c ar71xx: add profile and build image for UniFi AP Pro
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34730
2012-12-17 12:28:21 +00:00
Gabor Juhos abbd18776e ar71xx: add user-space support for UniFi AP Pro
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34728
2012-12-17 12:28:11 +00:00
Gabor Juhos ff3f28265f ar71xx: add kernel support for the UniFi AP Pro
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34727
2012-12-17 12:28:02 +00:00
John Crispin 7bcb6b5479 make pinctrl-falcon honour status="disbaled";
SVN-Revision: 34714
2012-12-16 10:03:28 +00:00
John Crispin 573cf13419 fix falcon profile
SVN-Revision: 34713
2012-12-16 10:03:23 +00:00
John Crispin 33d3433d75 fix i2c-lantiq module
SVN-Revision: 34712
2012-12-16 10:03:18 +00:00
John Crispin b637eb598d add falcon devicetree files
SVN-Revision: 34711
2012-12-16 10:03:11 +00:00
Felix Fietkau 8c3306b8b6 kernel: add a missing config symbol for 3.7
SVN-Revision: 34710
2012-12-15 22:00:03 +00:00
Jonas Gorski eba8cccd88 linux: generic: rtl836*: fix compilation with !CONFIG_OF
fixes the following errors caused by r34682:

  CC [M]  drivers/net/phy/rtl8366_smi.o
In file included from drivers/net/phy/rtl8366_smi.c:26:0:
drivers/net/phy/rtl8366_smi.h:149:46: warning: 'struct platform_device' declared inside parameter list [enabled by default]
drivers/net/phy/rtl8366_smi.h:149:46: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default]
drivers/net/phy/rtl8366_smi.c:1398:65: warning: 'struct platform_device' declared inside parameter list [enabled by default]
drivers/net/phy/rtl8366_smi.c: In function 'rtl8366_smi_probe_plat':
drivers/net/phy/rtl8366_smi.c:1400:44: error: dereferencing pointer to incomplete type
drivers/net/phy/rtl8366_smi.c:1402:11: error: dereferencing pointer to incomplete type
drivers/net/phy/rtl8366_smi.c:1403:16: error: dereferencing pointer to incomplete type
drivers/net/phy/rtl8366_smi.c: At top level:
drivers/net/phy/rtl8366_smi.c:1415:46: warning: 'struct platform_device' declared inside parameter list [enabled by default]
drivers/net/phy/rtl8366_smi.c:1415:21: error: conflicting types for 'rtl8366_smi_probe'
drivers/net/phy/rtl8366_smi.h:149:21: note: previous declaration of 'rtl8366_smi_probe' was here
drivers/net/phy/rtl8366_smi.c: In function 'rtl8366_smi_probe':
drivers/net/phy/rtl8366_smi.c:1420:31: error: dereferencing pointer to incomplete type
drivers/net/phy/rtl8366_smi.c:1424:10: error: dereferencing pointer to incomplete type
drivers/net/phy/rtl8366_smi.c:1425:3: warning: passing argument 1 of 'rtl8366_smi_probe_of' from incompatible pointer type [enabled by default]
drivers/net/phy/rtl8366_smi.c:1392:19: note: expected 'struct device_node *' but argument is of type 'struct platform_device *'
drivers/net/phy/rtl8366_smi.c:1427:3: warning: passing argument 1 of 'rtl8366_smi_probe_plat' from incompatible pointer type [enabled by default]
drivers/net/phy/rtl8366_smi.c:1398:5: note: expected 'struct platform_device *' but argument is of type 'struct platform_device *'
drivers/net/phy/rtl8366_smi.c: At top level:
drivers/net/phy/rtl8366_smi.c:1438:1: error: conflicting types for 'rtl8366_smi_probe'
drivers/net/phy/rtl8366_smi.h:149:21: note: previous declaration of 'rtl8366_smi_probe' was here
make[7]: *** [drivers/net/phy/rtl8366_smi.o] Error 1
make[6]: *** [drivers/net/phy] Error 2
make[5]: *** [drivers/net] Error 2
make[4]: *** [drivers] Error 2

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 34703
2012-12-15 13:32:02 +00:00
John Crispin 3ca51b5399 select hcd as a default package for the dgn3500
SVN-Revision: 34702
2012-12-15 11:01:16 +00:00
John Crispin 85e4da7e23 EASY80920 has 2 usb ports
SVN-Revision: 34701
2012-12-15 11:01:11 +00:00
John Crispin 3dac521a49 remove 3.3 and 3.6
SVN-Revision: 34699
2012-12-15 02:01:08 +00:00
John Crispin 1dece11487 cleanup basefiles
SVN-Revision: 34698
2012-12-15 02:01:00 +00:00
John Crispin 601bc28669 clean up modules.mk
SVN-Revision: 34697
2012-12-15 02:00:55 +00:00
John Crispin 2c33df0376 add devicetrees
SVN-Revision: 34691
2012-12-15 02:00:20 +00:00
John Crispin 3a948770cf add linux-v3.7
SVN-Revision: 34687
2012-12-15 01:59:45 +00:00
John Crispin d8678644f9 make rtl8366 driver OF capable
SVN-Revision: 34682
2012-12-15 01:59:08 +00:00
Hauke Mehrtens 4901ac8225 brcm47xx: improve suppressing printing if a module was found in preinit function.
Thank you Bastian Bittorf

SVN-Revision: 34680
2012-12-14 22:45:12 +00:00
Gabor Juhos 57d7df3a35 generic: export include/linux/switch.h on 3.3, 3.6
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34678
2012-12-14 12:11:48 +00:00
Gabor Juhos a860153cce generic: disintegrate UAPI from include/linux/switch.h
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34677
2012-12-14 12:11:41 +00:00
Gabor Juhos 8aed692309 generic: refresh patches
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34676
2012-12-14 08:47:39 +00:00
Gabor Juhos 272ef8ac00 generic: update pci_disable_usb_common_quirks patch
Fixes the following compiler warning:
drivers/usb/host/pci-quirks.c:459:23: warning: 'quirk_usb_handoff_uhci' defined but not used [-Wunused-function]

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34675
2012-12-14 08:32:56 +00:00
Gabor Juhos 2e2c88b625 ar71xx: reorder some patches
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34674
2012-12-14 07:16:56 +00:00
Gabor Juhos 34411a0cbd ar71xx: merge unifi outdoor patch into the ubnt-xm one
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34673
2012-12-14 07:16:50 +00:00
Hauke Mehrtens 6c8efbfdc0 brcm47xx: Additional BCM4716 support
Additional BCM4716 support.  Still needs working ethernet driver.

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 34672
2012-12-13 18:57:38 +00:00
Hauke Mehrtens 6672d869da brcm47xx: BCMA - Broadcom 2011 SDK Updates
I noticed these changes when reviewing the 2011 Broadcom SDK. I haven't
noticed any obvious changes in behavior with them applied; but thought I
should at least pass them on.

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 34670
2012-12-13 18:54:04 +00:00
Hauke Mehrtens 97d22306da brcm47xx: return the real irq number in bcma_core_irq
The irq signal numbers that are send by the cpu are increased by 2 from
the number programmed into the mips core by bcma.
Return the irq number on which the irqs are send in bcma_core_irq() now.

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 34669
2012-12-13 18:51:10 +00:00
Gabor Juhos 6e4082f170 kernel: fix solos-pci skb double-free in DMA mode
[juhosg: refresh the patches with quilt]

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34667
2012-12-13 18:39:31 +00:00
Florian Fainelli 321852348f kernel: fix perf build with uclibc toolchains on x86
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34666
2012-12-13 17:34:22 +00:00
Florian Fainelli 5e7d69554e kernel/3.6: backport an upstream build for perf with uClibc
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34662
2012-12-13 15:40:27 +00:00
Felix Fietkau 2bb7f82d8a kernel: fix porting mistakes on the 3.6+ SIP NAT patch causing crashes
SVN-Revision: 34657
2012-12-13 13:07:13 +00:00
Hauke Mehrtens 71712ec522 brcm47xx: this usb patch is not needed, the Broadcom SDK does it the other way.
SVN-Revision: 34655
2012-12-13 00:12:42 +00:00
Hauke Mehrtens 5be97468f6 brcm47xx: use kernel 3.6.10 by default now
SVN-Revision: 34654
2012-12-13 00:11:55 +00:00
Hauke Mehrtens 235c065e12 brcm47xx: suppress printing if a module was found in preinit function.
SVN-Revision: 34653
2012-12-13 00:11:11 +00:00
Hauke Mehrtens 3a4a6cfd64 kernel: in kernel 3.6.8 and later tg3 depends on hwmon.ko
SVN-Revision: 34652
2012-12-13 00:09:55 +00:00
Hauke Mehrtens 1bd8db0bd6 kernel: update bcma and ssb to master-2012-12-11-2 from wireless-testing
SVN-Revision: 34651
2012-12-12 22:42:18 +00:00
Gabor Juhos d085aad288 ar71xx: add profile and build initramfs image for the WNDR4300
It is not yet possible to use the default squasfsh/jffs2 images
on NAND flashes, so only initramfs image is supported for now.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34650
2012-12-12 16:49:52 +00:00
Gabor Juhos dcdfcb75f0 ar71xx: add user-space support for the NETGEAR WNDR4300
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34649
2012-12-12 16:49:51 +00:00
Gabor Juhos bc82db7d78 ar71xx: add kernel support for the NETGEAR WNDR4300
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34647
2012-12-12 16:49:49 +00:00
Gabor Juhos 75b71f4a74 ar71xx: add ap91_pci_init_simple helper
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34646
2012-12-12 16:49:48 +00:00
Gabor Juhos d7cebac243 ar71xx: add ath79_wmac_register_simple helper
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34645
2012-12-12 16:49:47 +00:00
Gabor Juhos ec26814b0e ar71xx: refresh 3.3 patches
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34644
2012-12-12 16:49:46 +00:00
Gabor Juhos cdfc300948 ar71xx: remove superfluous USB patches for 3.3
SVN-Revision: 34643
2012-12-12 16:49:43 +00:00
Gabor Juhos eece71be56 generic: fix 8139cp patch for 3.6
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34640
2012-12-12 08:37:27 +00:00
Gabor Juhos 2b378d11c8 kernel: update linux 3.6 to 3.6.10
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34639
2012-12-11 20:14:39 +00:00
Florian Fainelli ed15c452a1 kernel: update to 3.7 final
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34626
2012-12-11 11:31:17 +00:00
Florian Fainelli aa2dc106c6 switch to 3.6 kernel
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34623
2012-12-10 21:06:10 +00:00
Florian Fainelli ff6116cbdf add 3.6 kernel support
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34622
2012-12-10 21:06:05 +00:00
Florian Fainelli 17c76e5ca8 add sound feature
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34621
2012-12-10 21:05:48 +00:00
Florian Fainelli cbfca35c76 generic: backport a fix for the input keymap-matrix module
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34620
2012-12-10 21:05:42 +00:00
Florian Fainelli 87c8808ca5 keyboard driver depends on input-matrixkmap for 3.6+
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34619
2012-12-10 21:05:36 +00:00
Florian Fainelli 5c28c5255f generic: backport an upstream fix for building snd-soc-pcm as a module
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34617
2012-12-10 21:05:27 +00:00
Florian Fainelli f016b935d3 also list kmod-sound-core in the default packages
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34615
2012-12-10 21:05:11 +00:00
Gabor Juhos dfd718d13d mac80211: ath9k: allow to load EEPROM data via firmware API
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34606
2012-12-10 15:46:15 +00:00
Florian Fainelli 374a72411a generic/kernel: add a fix for a common MIPS build failure.
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34602
2012-12-10 15:04:10 +00:00
Florian Fainelli c1c6a23f13 kernel/generic: refresh 3.7 patches
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34601
2012-12-10 15:03:55 +00:00
Florian Fainelli 0f90806014 kernel/generic: port r34599 over 3.7 kernel
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34600
2012-12-10 15:03:51 +00:00
Florian Fainelli 67e85c0018 kernel/generic: fix build failure on missing uhci symbol
linux-3.6.8/drivers/usb/host/pci-quirks.c:471: undefined reference to
`uhci_check_and_reset_hc'

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34599
2012-12-10 14:24:28 +00:00
John Crispin c2ae0ec02a add support for Hauppauge Broadway
This patch introduces OpenWRT support for the base Hauppauge/PCTV Broadway
platform.  It doesn't deal with the TV tuner or transcoder at this point,
but the core functionality is working (Ethernet, wireless, USB, buttons,
LEDs, etc).

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>

SVN-Revision: 34595
2012-12-10 14:13:01 +00:00
Gabor Juhos 3cbc1a49e2 ar71xx: load ar934x_nfc driver earlier
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34589
2012-12-10 10:38:11 +00:00
Gabor Juhos 1f7ae58a2c ar71xx: ar934x_nfc: allow to control DMA data swap via platform data
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34588
2012-12-10 10:38:07 +00:00
Gabor Juhos 2581173660 kernel: update linux 3.6 to 3.6.9
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34578
2012-12-08 15:01:33 +00:00
Gabor Juhos 47f9b2a110 ar71xx: TP-LINK also has a family TL-WDR
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34577
2012-12-07 19:10:57 +00:00
Gabor Juhos d7ba2b4840 ar71xx: add profile and build image for TP-LINK TL-WA801N/ND
Patch-by: Amir Sagie <openwrt-devel@taproot.org.il>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34576
2012-12-07 19:10:56 +00:00
Florian Fainelli deeeb5f671 create Linksys WRTU54G-TM profile
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34572
2012-12-07 18:02:31 +00:00
Florian Fainelli 33f6c5ddb9 kernel: add missing USB configuration symbols after r34501
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34568
2012-12-07 11:01:53 +00:00
Florian Fainelli 8236584b13 rename interrupt number constants
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34566
2012-12-06 22:41:14 +00:00
Florian Fainelli f1e4da0389 remove the now deprecated /proc/adm8668 interface
Proper gpiolib support is hooked instead.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34565
2012-12-06 22:41:09 +00:00
Florian Fainelli 849662a8ec add a gpiolib driver
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34564
2012-12-06 22:41:04 +00:00
Florian Fainelli 78b235cfc3 do not reset WAN and LAN blocks
This is taken care of by the tulip driver accordingly.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34563
2012-12-06 22:40:58 +00:00
Florian Fainelli b3f36553cc enable and advertise USB support
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34562
2012-12-06 22:40:54 +00:00
Florian Fainelli a5aed4ec3a add support for on-board EHCI controller
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34561
2012-12-06 22:40:49 +00:00
Florian Fainelli 88f6bf64cf remove the "old" tulip forked driver
We can now use the mainline tulip driver.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34559
2012-12-06 22:40:40 +00:00
Florian Fainelli 40ab1facd2 use the tulip platform driver
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34558
2012-12-06 22:40:36 +00:00
Florian Fainelli 445e77fdb5 patch the tulip driver to accept a platform variant
Isolate the PCI specific parts and group them under CONFIG_TULIP_PCI
CONFIG_TULIP_PLATFORM can be enabled for a platform style Tulip driver.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34557
2012-12-06 22:40:31 +00:00
Florian Fainelli b1f1381c27 move clock frequencies into clock driver
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34556
2012-12-06 22:40:26 +00:00
Florian Fainelli 60663b12b2 add CONFIG_GPIO_PL061 config symbol
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34555
2012-12-06 22:40:21 +00:00
Florian Fainelli 1232f91efb replace the custom mtd driver with a partition parser
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34554
2012-12-06 22:40:17 +00:00
Florian Fainelli b516c8d89d cleanup PCI controller code
At some point we should make the ADM5120 PCI controller driver a real
platform driver and share that one between the two targets.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34553
2012-12-06 22:40:12 +00:00
Florian Fainelli 1ed763b888 cleanup and make interrupt code more robust
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34552
2012-12-06 22:40:02 +00:00
Florian Fainelli 47ccbaaa91 remove frequency from /proc/cpuinfo
This is not the place to expose it and duplicates code reading the
system frequency.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34551
2012-12-06 22:39:57 +00:00
Florian Fainelli e37f6fb458 provide a system clock to be used by the MIPS timer
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34550
2012-12-06 22:39:52 +00:00
Florian Fainelli 79c2ce01b7 get rid of the UART defines
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34549
2012-12-06 22:39:47 +00:00
Florian Fainelli afc2b07be1 get rid of the specific UART driver and use AMBA PL010
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34548
2012-12-06 22:39:43 +00:00
Florian Fainelli 2dee2133c5 implement early_printk without an early_console
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34547
2012-12-06 22:39:33 +00:00
Florian Fainelli f85115efd8 simplify IRQ controller code
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34546
2012-12-06 22:39:27 +00:00
Florian Fainelli 50303d52e2 use platform_add_devices
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34545
2012-12-06 22:39:22 +00:00
Florian Fainelli 192c1e90bc move time related functions to their own file
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34544
2012-12-06 22:39:18 +00:00
Florian Fainelli 1f939889ca move setup-related functions to their own file
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34543
2012-12-06 22:39:08 +00:00
Felix Fietkau abc03de599 kernel: add missing config symbols
SVN-Revision: 34532
2012-12-06 14:11:16 +00:00
Felix Fietkau a3843e7ec7 kernel 3.6+: nuke obsolete patches that are messing up oprofile builds
SVN-Revision: 34506
2012-12-05 16:49:48 +00:00
Florian Fainelli 512baafc6b kernel/3.3: move OHCI and EHCI platform drivers to generic
These patches are not specific to bcm47xx and will be used on other
platforms as well.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34501
2012-12-05 14:18:05 +00:00
Florian Fainelli 822ee5053e cns3xxx: fix dwc_otg driver compat with udc-core
function.  This removes those from the dwc_otg driver and removes the patch
that comments out the linkage of udc-core so that the dwc_otg driver can
co-exist happily with other USB Device Controllers.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34475
2012-12-04 16:19:18 +00:00
Florian Fainelli fd0729f35c cns3xxx: advertise pcie usb usbgadget features
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34474
2012-12-04 16:19:12 +00:00
Florian Fainelli d9d0814fc2 Fix Comtrend AR-5381u Power LED
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34471
2012-12-04 15:19:50 +00:00
Florian Fainelli d3cda51994 do no longer rename amba-pl010 serial devices names
Back in the days when we could not override /etc/inittab, it made a lot
of sense to rename ttyAM to ttyS since this was the only supported
serial device(s), we can now just put in an appropriate /etc/inittab file
now.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34469
2012-12-03 16:18:40 +00:00
Felix Fietkau a7220cd9f8 kernel: disable more pci quirks to save space on platforms that don't need them
SVN-Revision: 34467
2012-12-03 10:33:47 +00:00
Felix Fietkau ec885796c0 kernel 3.6+: switch to a crc32 implementation that is more suitable for small caches. reduces kernel image size by ~22 KiB on mips
SVN-Revision: 34461
2012-12-02 18:37:41 +00:00
Felix Fietkau 24b31c9428 kernel: fix stripping symbol exports
SVN-Revision: 34458
2012-12-02 17:42:17 +00:00
Hauke Mehrtens 2ac9ac5163 brcm47xx: read sprom vars without prefix for boardrev and boardtype if the prefixed one is not available.
SVN-Revision: 34454
2012-12-02 16:11:39 +00:00
Felix Fietkau 38d3b8d0ea kernel: patch in a working copy of elf.h instead of using relative path based hackery in #include statements
SVN-Revision: 34449
2012-12-02 15:26:19 +00:00
Gabor Juhos e0e43655ce ramips: fix serial console for Belkin F5D8235 v1/v2
Based on a patch from #12533.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34445
2012-12-02 14:16:12 +00:00
Gabor Juhos 890f83dfb3 Update linux-atm fixes to reflect the final upstream pull request
[juhosg: refresh the patches with quilt]

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34443
2012-12-02 13:04:04 +00:00
Jo-Philipp Wich 476ea2bcb4 imagebuilder: use file_copy to deploy files/ in the image generation phase
SVN-Revision: 34439
2012-12-02 12:20:43 +00:00
Florian Fainelli 4a1e2123eb kernel: remove references to TARGET_ubicom32
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34431
2012-11-30 10:53:51 +00:00
Florian Fainelli 527afd0e9a remove target
This target is unused, does not support any off the shelf hardware and
has been a maintenance burden for quite some time now.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34430
2012-11-30 10:53:47 +00:00
Florian Fainelli c830644d97 remove Linux 3.3 support
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34426
2012-11-29 21:43:02 +00:00
Florian Fainelli 763f780553 use a default kernel command-line to mount squashfs and jffs2
This fixes bug #9055.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34424
2012-11-29 21:42:53 +00:00
Gabor Juhos 7cde0281f4 kernel: Fix 8139cp ring buffer initialisation, tx timeout recovery, add BQL
Patches queued upstream in net-next.git

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34415
2012-11-29 17:58:28 +00:00
Gabor Juhos 4f5defdc3b ar71xx: switch to 3.6.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34414
2012-11-29 17:53:42 +00:00
Gabor Juhos ea17e36482 kernel: Update Geos to 3.6.8
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34411
2012-11-29 17:37:19 +00:00
Gabor Juhos 543c2c27d1 kernel: Add ATM fixes pending upstream merge (queue reduction, race fixes)
Patches about to go into net-next.git

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34410
2012-11-29 17:37:18 +00:00
Gabor Juhos df6727639a kernel: Add missing CONFIG_BATTERY_DS2781 option to generic 3.6 config
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34409
2012-11-29 17:37:16 +00:00
Gabor Juhos 44131bd785 ramips: rt305x: add profile and build image for the Asus RT-N13U
Signed-off-by: Amit Mendapara <mendapara.amit@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34407
2012-11-29 17:37:14 +00:00
Gabor Juhos d3994b7408 ramips: rt305x: add user-space support for the Asus RT-N13U
Signed-off-by: Amit Mendapara <mendapara.amit@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34406
2012-11-29 17:37:13 +00:00
Gabor Juhos 0ec59e6235 ramips: rt305x: add kernel support for the Asus RT-N13U Wireless-N300 Router
The work has been backported from openwrt-dreambox with
some modifications & code cleanup.

* updated config-3.3
* updated config-3.6
* renamed rt-n13 to rt-n13u
* fixed mach-rt-n13u.c

[juhosg: move user-space support and image generation into separate
patches]

Signed-off-by: Amit Mendapara <mendapara.amit@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34405
2012-11-29 17:37:11 +00:00
Gabor Juhos c2f018fca2 remove common symbols from 3.6 configs
The removed symbols are present in the generic configuration.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34404
2012-11-29 15:21:41 +00:00
Gabor Juhos 1f516235ea remove common symbols from 3.3 configs
The removed symbols are present in the generic configuration.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34403
2012-11-29 15:21:35 +00:00
Gabor Juhos 3a4d0ebd5c kernel: update linux 3.6 to 3.6.8
Also refresh the affected patches.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34402
2012-11-29 07:42:19 +00:00
Florian Fainelli ee16e144bb use physmap-flash part_probe_types
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34398
2012-11-27 18:42:49 +00:00
Florian Fainelli 0588d13a3e Fix typo in 96338GW power LED.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34396
2012-11-27 18:42:42 +00:00
Florian Fainelli dd852e242d add AudioCodes AC495 SoC
Found in the AudioCodes Tulip AC494 ATA.

Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34395
2012-11-27 18:42:39 +00:00
Florian Fainelli d59ba20030 do not call clk_put() on the timer clock
We don't support disabling the clock, but this is actually what it would do.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34394
2012-11-27 18:42:36 +00:00
Florian Fainelli 5d6208f34d do not list specific board compatible strings
The general practice is to use the general SoC compatible string in both the
DTS and the board specific .c file.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34393
2012-11-27 18:42:32 +00:00
Florian Fainelli 94b7be6dd7 remove unused variables from Makefile.boot
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34392
2012-11-27 18:42:28 +00:00
Hauke Mehrtens efd00e6240 brcm47xx: fix title of Bcm4705-wl profile
SVN-Revision: 34378
2012-11-25 16:41:00 +00:00
Hauke Mehrtens a3d976aff5 brcm47xx: add profile for bcm4705 with wl driver
SVN-Revision: 34336
2012-11-25 16:15:27 +00:00
Gabor Juhos 57b7879a4e ramips: ramips_eth: use Kconfig definition to enable debug
The Kconfig identifier to enable debugging in the driver was different from the
actually used one. Fix that.

Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34332
2012-11-25 14:25:54 +00:00
Gabor Juhos 21d5df8700 ramips: add DIR-615 D userspace support
Commit 7c8edac25f23c4fc14239fdc293caa1317649944 introduced new machine and
Makefile changes to build images for this target. However, without the userspace
bits a ramips machine can't use wifi as the necessary "eeprom" data is to be
extracted by a hotplug script; also, sysupgrade support and default led
configuration are missing.

An IRC user reported these changes allowed him to use wifi on his hardware.

Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34331
2012-11-25 14:25:27 +00:00
Hauke Mehrtens 608efcdbd0 kernel: add CONFIG_BCMA_POSSIBLE=y to generic config as it is set in most of the target configs.
SVN-Revision: 34330
2012-11-25 14:14:17 +00:00
Hauke Mehrtens aa8e887a46 brcm47xx: whitespace cleanups
SVN-Revision: 34329
2012-11-25 14:03:51 +00:00
Hauke Mehrtens be77f9951c brcm47xx: fix cpu clock detection on ASUS WL-520gU
The ASUS WL-520gU and some other similar Asus devices have a BCM5354
running at 200MHZ and not at 240 which is the default for this SoC.

This fixes #4083.

SVN-Revision: 34325
2012-11-24 20:28:06 +00:00
Hauke Mehrtens 264873b3c5 brcm47xx: watchdog: deactivate NOWAYOUT.
In the old configuration the SoC issued a reboot if the watchdog was
killed also if it was kill with TERM and not KILL.

This will fix #11724.

SVN-Revision: 34324
2012-11-24 20:24:27 +00:00
Hauke Mehrtens c62d86ecb8 brcm47xx: update watchdog driver
This watchdog driver should work with SoC having a PMU.

This fixes #11720.

SVN-Revision: 34323
2012-11-24 20:07:25 +00:00
Jonas Gorski 60e0e0d6e6 bcm63xx: Add a fixup for rt2x00 devices.
This patch adds support for defining rt2x00 eeprom data.
This eeprom data can be extracted from flash or loaded directly from a firmware file.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 34322
2012-11-24 14:19:22 +00:00
Jonas Gorski 746b4cec06 bcm63xx: Enable LED pin support for ath9k pci fixup.
Some boards need specifying LED pin in order to get it working.
For example, in board HW556 (Huawei HG556a) "led_pin" must be "2".
By default led_pin is "0", so dsl_274xb_rev_f is changed to "-1".

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 34321
2012-11-24 14:19:16 +00:00
Jonas Gorski 1baeede939 bcm63xx: fix spi transfer handling
* Accept transfers without bits_per_word set.

* Work around the inability of the hardware of keeping CS asserted.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 34320
2012-11-24 14:19:09 +00:00
Gabor Juhos b0b994cf76 ar71xx: set pad6 cfg for AR8327 on the AP136 board
Also override the pll_1000 value. Without these settings
ethernet suffers from packet loss.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34316
2012-11-23 20:55:34 +00:00
Gabor Juhos 49d4b5581d generic: ar8216: set delay values for SGMII mode on AR8327
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34315
2012-11-23 20:55:26 +00:00
Florian Fainelli 6b63716262 add preliminary support for musl
Musl is an alternative C-library, see http://www.musl-libc.org for more infos.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34314
2012-11-23 20:02:29 +00:00
Jo-Philipp Wich b73f22de1e imagebuilder: merge r25078 to align files/ handling with current buildroot
SVN-Revision: 34301
2012-11-22 19:46:54 +00:00
Gabor Juhos 3205b52d1c generic: ar8216: introduce ar8216_mib_op helper
The ar8216_mib_{capture,flush} functions are similar.
Move the common code into a helper and use that from
the original functions.

This change also fixes a lockdep warning in
ar8216_mib_flush.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34297
2012-11-22 10:33:03 +00:00
Gabor Juhos 10d30f2d2d swconfig: make it compatible with 3.7
swconfig does not compile with 3.7 because

struct netlink_notify->pid    has been renamed to
struct netlink_notify->portid

and

struct genl_info->snd_pid     has been renamed to
struct genl_info->snd_portid

Use the new names and add compatibility patches
to 3.3 and 3.6.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34288
2012-11-21 17:38:11 +00:00
John Crispin f7ead0a2d5 adds proper package selection for dgn3500
SVN-Revision: 34286
2012-11-21 06:06:48 +00:00
Gabor Juhos e20a0baa04 cns21xx: add support for 3.6
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34285
2012-11-20 21:37:53 +00:00
Gabor Juhos 5c740aa23c generic: add some missing symbols for 3.7
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34284
2012-11-20 21:34:43 +00:00
Gabor Juhos 2a792f32b5 generic: ar8216: fix port number check in 'ar8xxx_mib_work_func'
Also add a WARN_ON to 'ar8216_mib_fetch_port_stat'

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34283
2012-11-20 20:40:04 +00:00
Gabor Juhos 258b2f2dc2 generic: ar8216: remove an unblanced mutex_unlock call
Fixes the following warning:

[   94.080000]
[   94.080000] =====================================
[   94.080000] [ BUG: bad unlock balance detected! ]
[   94.080000] 3.3.8 #2 Tainted: G           O
[   94.080000] -------------------------------------
[   94.080000] swconfig/1220 is trying to release lock (&priv->mib_lock) at:
[   94.080000] [<801df8f4>] ar8216_sw_get_port_mib+0x138/0x16c
[   94.080000] but there are no more locks to release!
[   94.080000]
[   94.080000] other info that might help us debug this:
[   94.080000] 2 locks held by swconfig/1220:
[   94.080000]  #0:  (genl_mutex){+.+...}, at: [<80222430>] genl_rcv+0x14/0x34
[   94.080000]  #1:  (&dev->sw_mutex){+.+...}, at: [<801da018>] swconfig_get_dev+0x88/0xb4
[   94.080000]
[   94.080000] stack backtrace:
[   94.080000] Call Trace:
[   94.080000] [<8028dc58>] dump_stack+0x8/0x34
[   94.080000] [<800a5128>] print_unlock_inbalance_bug+0xe0/0xfc
[   94.080000] [<800a82c0>] lock_release+0x18c/0x1c8
[   94.080000] [<80292074>] __mutex_unlock_slowpath+0xd8/0x17c
[   94.080000] [<801df8f4>] ar8216_sw_get_port_mib+0x138/0x16c
[   94.080000] [<801db688>] swconfig_get_attr+0xbc/0x394
[   94.080000] [<8022261c>] genl_rcv_msg+0x1cc/0x214
[   94.080000] [<80221a18>] netlink_rcv_skb+0x6c/0xe8
[   94.080000] [<80222440>] genl_rcv+0x24/0x34
[   94.080000] [<80221370>] netlink_unicast+0x15c/0x22c
[   94.080000] [<8022175c>] netlink_sendmsg+0x240/0x2d0
[   94.080000] [<801ef544>] sock_sendmsg+0x84/0x9c
[   94.080000] [<801f0648>] __sys_sendmsg+0x1cc/0x270
[   94.080000] [<801f207c>] sys_sendmsg+0x48/0x7c
[   94.080000] [<8006ad78>] stack_done+0x20/0x40
[   94.080000]

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34282
2012-11-20 20:40:03 +00:00
Gabor Juhos 82b57b0c28 generic: ar8216: add missing locking calls
Fixes the following lockdep warning:

[   19.160000] ------------[ cut here ]------------
[   19.160000] WARNING: at drivers/net/phy/ar8216.c:322 ar8216_rmw+0x54/0xa4()
[   19.170000] Modules linked in: nf_defrag_ipv4 nf_conntrack ehci_hcd
sd_mod pppox ipt_REJECT xt_TCPMSS ipt_LOG xt_comment xt_multip
ort xt_mac xt_limit iptable_mangle iptable_filter ip_tables xt_tcpudp
x_tables ppp_async ppp_generic slhc ath9k(O) ath9k_common(O) at
h9k_hw(O) ath(O) mac80211(O) usbcore usb_common scsi_mod nls_base crc7
crc_itu_t crc_ccitt cfg80211(O) compat(O) arc4 aes_generic cry
pto_blkcipher cryptomgr aead crypto_hash crypto_algapi ledtrig_timer
ledtrig_default_on leds_gpio gpio_button_hotplug(O)
[   19.210000] Call Trace:
[   19.220000] [<8028dc38>] dump_stack+0x8/0x34
[   19.220000] [<80072da0>] warn_slowpath_common+0x78/0xa4
[   19.230000] [<80072de4>] warn_slowpath_null+0x18/0x24
[   19.230000] [<801de820>] ar8216_rmw+0x54/0xa4
[   19.240000] [<801df460>] ar8216_mib_capture+0x70/0xd0
[   19.240000] [<801df944>] ar8xxx_mib_work_func+0x34/0x98
[   19.250000] [<80089a7c>] process_one_work+0x28c/0x460
[   19.250000] [<8008a630>] worker_thread+0x22c/0x334
[   19.260000] [<8008e544>] kthread+0x88/0x90
[   19.260000] [<80065020>] kernel_thread_helper+0x10/0x18
[   19.270000]
[   19.270000] ---[ end trace 22e9d696adfa6a08 ]---

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34281
2012-11-20 20:40:00 +00:00
Gabor Juhos c0f73ac607 generic: convert yaffs to use kuid_t and kgid_t on 3.6+
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34280
2012-11-20 17:45:24 +00:00
Gabor Juhos 188908e885 ar71xx: make rb750_nand driver compatible with 3.7
Also add compatibility patches for the currently
supported kernels.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34279
2012-11-20 16:29:43 +00:00
Gabor Juhos 8194237789 ar71xx: make ar934x_nfc driver compatible with 3.7
Also add compatibility patches for the currently
supported kernels.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34278
2012-11-20 16:29:42 +00:00
Gabor Juhos 4468fd7ae4 ar71xx: refresh rb4xx_nand patch
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34277
2012-11-20 15:53:17 +00:00
Gabor Juhos 46a3b818b9 ar71xx: remove buffer verification reference from rb4xx_nand.c
It is a dead code.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34276
2012-11-20 14:40:22 +00:00
Gabor Juhos 674b91ce0e ar71xx: fix GPIO function selection for AR934x
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34275
2012-11-20 14:27:17 +00:00
Gabor Juhos d833ca527d ar71xx: restore rb4xx kernel partition size to the original value
The new lzma compressed elf kernel image fits into
that, even on devices with large page NAND chips.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34274
2012-11-20 12:17:45 +00:00
Gabor Juhos 33a99ce46b ar71xx: install lzma compressed elf kernel image from wget2nand
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34273
2012-11-20 12:17:44 +00:00
Gabor Juhos 68b5aa2fdf ar71xx/image: provide lzma compressed elf kernel image
This will be used on the RB4xx/RB7xx/RB2011 boards.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34272
2012-11-20 12:17:43 +00:00
Gabor Juhos 97867f8717 ar71xx/image: relink loader.elf image to LOADADDR
This allows to load the resulting image directly
from RouterBOOT.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34271
2012-11-20 12:17:41 +00:00
Gabor Juhos dd092fd10c ramips: set clk_is_20mhz for rt2x00 on RT3352/RT5350
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34270
2012-11-20 07:19:10 +00:00
Gabor Juhos 6c1fbb2d5c mac80211/rt2x00: add rf_vals for Rt3352 with Xtal=20MHz
[juhosg: move ramips specific stuff into a followup patch]

Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34269
2012-11-20 07:19:09 +00:00
Gabor Juhos 8e4cefc7f8 refresh all kernel configurations
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34267
2012-11-20 07:19:06 +00:00
Jonas Gorski 8dc72c5c4d Revert "target specific patches have nothing to do in generic.."
This reverts commit r34230, as it is causing build failures:

 make[3] -C package/mtd compile
imagetag.c:35:32: fatal error: linux/bcm963xx_tag.h: No such file or directory
compilation terminated.
make[4]: *** [imagetag.o] Error 1

Any patches modifying exported kernel headers need to reside in generic
as toolchain/kernel-headers only applies generic patches.

SVN-Revision: 34255
2012-11-19 12:38:26 +00:00
Imre Kaloz 4c043300fc fix 820-usb_add_usb_find_device_by_name.patch
SVN-Revision: 34254
2012-11-19 10:56:09 +00:00
Hauke Mehrtens 4fa5781a95 kernel: refresh patches
SVN-Revision: 34253
2012-11-18 21:40:30 +00:00
Hauke Mehrtens 86cc79ac98 brcm47xx: add support for kernel 3.6
This is based on the patch by Peter Wagner.

SVN-Revision: 34252
2012-11-18 21:27:00 +00:00
Hauke Mehrtens db763080f4 kernel: add missing generic config options for 3.6+
SVN-Revision: 34250
2012-11-18 20:54:53 +00:00
Hauke Mehrtens c159c7a462 kernel: add CONFIG_XZ_DEC=y to generic
CONFIG_SQUASHFS_XZ selects CONFIG_XZ_DEC so this could also be moved.

SVN-Revision: 34249
2012-11-18 20:48:53 +00:00
Gabor Juhos d577d69838 ar71xx: use custom LZMA dictionary size for WNDR3700 images
Based on a patch by Hannu Nyman.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34248
2012-11-18 20:25:13 +00:00
Imre Kaloz 935ca3f3eb add 3.7-rc6 support (patch 820 still has to be fixed)
SVN-Revision: 34247
2012-11-18 18:52:38 +00:00
Gabor Juhos 863657d040 generic: ar8216: add MIB counter support for the AR8216 switch as well
Thanks to Jonas Gorski for the reference URL.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34245
2012-11-18 16:21:00 +00:00
Gabor Juhos 98f30aac8e generic: ar8216: rename AR8216_*_STATS_* defines
The names are misleading, those are only valid from
AR8236. The AR8216 chip uses different offsets.

Thanks to Jonas Gorski for the report.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34244
2012-11-18 16:20:56 +00:00
Gabor Juhos 9abd8cd004 generic ar8216: allow to read/reset MIB counters via swconfig
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34243
2012-11-18 12:26:35 +00:00
Gabor Juhos 4b17323b51 generic: ar8216: use dynamically allocated private data in ar8216_probe
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34242
2012-11-18 12:26:34 +00:00
Gabor Juhos 169e596268 ar71xx: add user-space support for the RB435G board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34240
2012-11-18 10:18:02 +00:00
Gabor Juhos d44d954dec ar71xx: add kernel support for the RB435G board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34239
2012-11-18 10:18:01 +00:00
Gabor Juhos d62bddc620 ar71xx: update PCI IRQ map for RB4xx devices
Should fix #12269.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34238
2012-11-18 09:51:04 +00:00
Gabor Juhos 31881357af ar71xx: create profile and build image for the OpenMesh MR600 board
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34237
2012-11-18 09:32:41 +00:00
Gabor Juhos 9da2c85b67 ar71xx: enable sysupgrade for the OpenMesh MR600
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34235
2012-11-18 09:32:39 +00:00
Gabor Juhos 6380301d01 ar71xx: rename om2p.sh upgrade script to openmesh.sh
It will be used on other boards as well.

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34234
2012-11-18 09:32:37 +00:00
Gabor Juhos d325e622d2 scripts/om-fwupgradecfg-gen.sh: add support for the MR600
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34233
2012-11-18 09:32:36 +00:00
Gabor Juhos c3174179b7 ar71xx: add user-space support for the OpenMesh MR600 board
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34232
2012-11-18 09:32:35 +00:00
Gabor Juhos 8d4857d677 ar71xx: add kernel support for the OpenMesh MR600 board
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34231
2012-11-18 09:32:33 +00:00
Imre Kaloz b220071cd2 target specific patches have nothing to do in generic..
SVN-Revision: 34230
2012-11-18 09:22:38 +00:00
Gabor Juhos c90128ce31 generic: remove temporary config file introduced in r34227
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34229
2012-11-18 08:51:56 +00:00
Gabor Juhos ff1e854511 kernel: update linux 3.6 to 3.6.7
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34227
2012-11-18 08:41:31 +00:00
Florian Fainelli a4c205011b move patches to patches-2.6.36
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34220
2012-11-16 16:32:55 +00:00
Florian Fainelli 974b9f5c9a remove broken flag
The SPARC qemu target works like a charm with the following qemu command-line:

qemu-system-sparc64 -M sun4u -L /home/florian/dev/qemu/pc-bios -kernel build_dir/linux-sparc/linux-3.6.6/vmlinux -nographic

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34219
2012-11-16 16:32:52 +00:00
Florian Fainelli 5261a171e9 update to kernel 3.6.6
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34218
2012-11-16 16:32:49 +00:00
Florian Fainelli 7e199fcc06 add missing framebuffer config symbol
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34217
2012-11-16 16:32:45 +00:00
Florian Fainelli b7f2f14801 advertise jffs2, squashfs and ext4 features
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34216
2012-11-16 16:32:42 +00:00
Florian Fainelli c6d9304d17 resync kernel configuration with 3.6 kernel
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34215
2012-11-16 16:32:39 +00:00
Florian Fainelli dd70319e6d build root filesystems and install them in $(BIN_DIR)
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34214
2012-11-16 16:32:36 +00:00
Florian Fainelli 8ad0b56ba5 do not build crashlog on sparc too
This is crashing the kernel in crashlog_init_fs(), until fixed, disable it
for SPARC too.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34213
2012-11-16 16:32:33 +00:00
Florian Fainelli 19811eddb4 switch to kernel 3.6.6
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34212
2012-11-16 16:32:29 +00:00
Florian Fainelli f98ac68e0e add support for 3.6 kernel
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34211
2012-11-16 16:32:26 +00:00
Florian Fainelli c555479127 move acx-mac80211 to the ar7 generic target
None of the AC49x boards that we support actually have Wi-Fi.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34208
2012-11-16 13:00:55 +00:00
Florian Fainelli b763d47bfe 3.6: add some framebuffer related config symbols
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34207
2012-11-16 13:00:51 +00:00
Florian Fainelli bc73cf5345 push atm, br2684ctl and kmod-pppoa down the DSL Profile
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34206
2012-11-16 13:00:48 +00:00
Hauke Mehrtens 485f9573f8 brcm47xx: revert r33935: check for .ELF header in partition parser
For sysupgrade the generic image should be used and the special image for the wgt634u is just needed for initial flashing over CFE.
russell reported that with this patch sysupgrdae did not worked for him any more and he could not reproduce the error described in #11420.
With the patch the linux partition also contained the loader which is in the first 128KB.

SVN-Revision: 34201
2012-11-15 16:39:45 +00:00
Gabor Juhos 7da001d068 scripts: rename om2p-fwupgradecfg-gen.sh to more generic om-fwupgradecfg-gen.sh
It will be used for non OM2P boards as well.

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34200
2012-11-14 14:18:33 +00:00
Gabor Juhos ee94ed4597 ar71xx: add profile and build image for the Ubiquiti UniFi AP-Outdoor board
Signed-off-by: Daniel Dickinson <daniel@powercloudsystems.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34198
2012-11-13 20:57:19 +00:00
Gabor Juhos 9c5c079329 ar71xx: add user-space support for the Ubiquiti UniFi AP-Outdoor board
Signed-off-by: Daniel Dickinson <daniel@powercloudsystems.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34197
2012-11-13 20:57:18 +00:00
Gabor Juhos 75c1d3ccc2 ar71xx: add support for the Ubiquiti UniFi AP-Outdoor device
[juhosg:
  - rename and refresh 660-MIPS-ath79-ubnt-xm-add-unifi-outdoor patches
  - wrap long lines in mach-ubnt-xm
  - remove default network config, set it from uci-defaults/network
    instead
  - remove user-space, and image generation stuff]

Signed-off-by: Daniel Dickinson <daniel@powercloudsystems.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34196
2012-11-13 20:57:17 +00:00
Gabor Juhos 7ab0e1566f ar71xx: add profiles and build images for old PowerCloud System devices
[juhosg:
  - use 'PowerCloud Systems' instead of 'PCS' in the profiles
  - sort SingleProfile instances in image/Makefile]

Signed-off-by: Daniel Dickinson <daniel@powercloudsystems.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34195
2012-11-13 20:57:15 +00:00
Gabor Juhos f6c3a8ddd6 generic: refresh 3.6 patches
SVN-Revision: 34194
2012-11-13 20:57:13 +00:00
Florian Fainelli e7f77f2742 fix badly named patch file
SVN-Revision: 34193
2012-11-13 17:39:44 +00:00
Florian Fainelli 857456aef8 switch to kernel 3.6.6
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34192
2012-11-13 17:20:19 +00:00
Florian Fainelli 390b8eb864 fix CBUS UART registration
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34191
2012-11-13 17:20:14 +00:00
Gabor Juhos 62c8ff19ad ar71xx: add profile and build image for the TL-WA7510N board
[juhosg: separated from the http://patchwork.openwrt.org/patch/2820/ patch]

Signed-off-by: Stefan Helmert <helst_listen@aol.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34190
2012-11-13 14:48:03 +00:00
Gabor Juhos 165b7d2173 ar71xx: user space support for the TL-WA7510N
[juhosg: separated from the http://patchwork.openwrt.org/patch/2820/ patch]

Signed-off-by: Stefan Helmert <helst_listen@aol.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34188
2012-11-13 14:48:01 +00:00
Gabor Juhos 91bab828aa ar71xx: add support for TP-Link TL-WA7510N
It is mostly the same as TL-WA901N. WLAN and LAN
are working. LAN LED is working. WLAN signal
strength LEDs are not working yet.

http://wiki.openwrt.org/toh/tp-link/tl-wa7510n?s[]=wa7510n

[juhosg:
  - cleanup commit message
  - move non kernel related stuff into separate changes
  - rename and refresh 615-MIPS-ath79-TL-WA7510N-v1-support patch
  - merge WA7510N support into the mach-tl-wa901nd.c file
  - add 3.6 support]

Signed-off-by: Stefan Helmert <helst_listen@aol.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34187
2012-11-13 14:48:00 +00:00
Gabor Juhos ce9d4fadfa ar71xx: refresh patches
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34186
2012-11-13 14:47:58 +00:00
John Crispin 3b419e506c fixes ar9 / dgn3500 support
SVN-Revision: 34180
2012-11-13 08:54:14 +00:00
John Crispin dd8c625424 previous commit pushed 1 file too many ;)
SVN-Revision: 34179
2012-11-12 21:36:23 +00:00
John Crispin ced0cf3a94 move ethernet hw init to init/uninit functions
This should fix the stalled irq problem seen by several people.
This is not the real fix, but rather moves the bug to the un/init patch of the driver.
The real bug still needs to be fixed, but this workaround should be suffcient to make
the ethernet stable.

SVN-Revision: 34177
2012-11-12 21:35:01 +00:00
Hauke Mehrtens 31541f81c3 brcm47xx: remove double definition of kmod-tg3 added in r34150
SVN-Revision: 34176
2012-11-12 21:34:00 +00:00
Hauke Mehrtens bac93bdd8e brcm47xx: fix cfe config detection on WGT634U broken in r33920
Thanks Russell Senior for reporting this.

SVN-Revision: 34175
2012-11-12 21:32:33 +00:00
Luka Perkov 00243027dd cns3xxx: merge gpio patches
SVN-Revision: 34174
2012-11-12 19:27:30 +00:00
Luka Perkov fb9b572f0a cns3xxx: fix build failure after r34168
SVN-Revision: 34173
2012-11-12 19:27:29 +00:00
Florian Fainelli a8c492dbb3 MIPS: add a build fix for arch/mips/boot/compressed/decompress.c
And get rid of the AR7 patch because at least the Alchemy SoC also needs it

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34170
2012-11-12 12:49:47 +00:00
Imre Kaloz 5cddb170cd reorder, rename and refresh patches
SVN-Revision: 34169
2012-11-12 09:18:00 +00:00
Imre Kaloz 77504ac06f split spi patch, follow mainline file naming
SVN-Revision: 34168
2012-11-12 08:22:14 +00:00
Imre Kaloz 9a780e0328 split the i2c patch, merge the retry fixup
SVN-Revision: 34167
2012-11-12 08:21:38 +00:00
John Crispin 5f30fe31b6 move redboot boardconfig patch into target folder
SVN-Revision: 34166
2012-11-12 07:56:37 +00:00
Imre Kaloz 527c473674 add support for the Tonze AP-422/425
SVN-Revision: 34165
2012-11-11 21:04:30 +00:00
Imre Kaloz ee9e3bf82e refresh patch
SVN-Revision: 34164
2012-11-11 21:03:52 +00:00
Imre Kaloz dcfd6cd5a4 generate single images for tftp flashing as well as sysupgrade images for boards with old u-boot
SVN-Revision: 34163
2012-11-11 20:57:04 +00:00
Luka Perkov 16275bdd15 cns3xxx: convert dwc_otg patches to files
SVN-Revision: 34162
2012-11-11 20:03:58 +00:00
Luka Perkov e38adfc912 cns3xxx: convert ethernet patches to files
SVN-Revision: 34161
2012-11-11 20:03:56 +00:00
Jonas Gorski 306894b88f bcm63xx: switch to 3.6.6
SVN-Revision: 34160
2012-11-11 19:57:17 +00:00
Imre Kaloz 4658e463d9 move fixed mapping of internal devices into vmalloc region
SVN-Revision: 34158
2012-11-11 19:29:27 +00:00
Florian Fainelli 9760644af4 advertise squashfs feature
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34157
2012-11-11 19:26:54 +00:00
Florian Fainelli dd541cbefa add support for Linux 3.6
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34156
2012-11-11 19:26:50 +00:00
Florian Fainelli f7fcb3c845 split kernel config between generic, au1500 and au1550
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34155
2012-11-11 19:26:44 +00:00
Florian Fainelli b363a7e491 add support for Linux 3.6
SVN-Revision: 34154
2012-11-11 18:41:09 +00:00
Florian Fainelli 854c504781 move files directory to files-3.3
SVN-Revision: 34153
2012-11-11 18:40:48 +00:00
Hauke Mehrtens cadd36a303 brcm47xx: remove ssb-gige package
CONFIG_SSB_DRIVER_GIGE is set in the target config of the brcm47xx target, so it will always be activated and the kmod-ssb-gige is not needed any more.
The kmod-ssb-gige package is not generated in an build as it does not contain any files and the makes the image builder fail when generating a image integrating this package.

SVN-Revision: 34150
2012-11-11 17:30:33 +00:00
Florian Fainelli 62c9156af6 generate image for AC49x
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34149
2012-11-11 16:11:39 +00:00
Florian Fainelli 9c7d221d47 create AC49x subtarget
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34148
2012-11-11 16:11:34 +00:00
Florian Fainelli 668234c109 create generic subtarget
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34147
2012-11-11 16:11:29 +00:00
Florian Fainelli 4891549bcd detect AC49x flash partitions
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34146
2012-11-11 16:11:22 +00:00
Florian Fainelli feb968d964 support AC49x bootloader environment
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34145
2012-11-11 16:11:14 +00:00
Florian Fainelli 7d09c61d65 add AudioCodes AC49x platform support to kernel
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34144
2012-11-11 16:11:09 +00:00
Florian Fainelli d9b89db380 free memory below kernel offset
Some bootloaders (e.g. PSPBoot on AC49x) have a load-offset, this frees that
memory region so it is usable for Linux.

Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34143
2012-11-11 16:11:00 +00:00
Jo-Philipp Wich 298a8e2300 x86/generic: don't disable usbfs (#12452)
SVN-Revision: 34139
2012-11-10 23:28:58 +00:00
Jonas Gorski c54fa281b1 bcm63xx: fix compilation with kmod-ohci enabled with 3.6
Fixes the following error:

drivers/usb/host/ohci-bcm63xx.c: In function 'ohci_bcm63xx_start':
drivers/usb/host/ohci-bcm63xx.c:33:3: error: implicit declaration of function 'err' [-Werror=implicit-function-declaration]

Reported-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 34138
2012-11-10 22:10:47 +00:00
Jonas Gorski 15519bec9c bcm63xx: add two missing usb patches to 3.6
SVN-Revision: 34137
2012-11-10 19:59:16 +00:00
Jonas Gorski 06ad6ffe16 bcm63xx: fix Ethernet DMA for 636x and 6328 for 3.6
SVN-Revision: 34136
2012-11-10 19:59:07 +00:00
Imre Kaloz f3f3f52259 cns3xxx: clean up pcie patches
Combine two pcie patches (2nd patch undid the 1st patch) together
and refresh the other affected patches

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 34132
2012-11-09 21:37:54 +00:00
John Crispin 71ddec8091 add more profiles
SVN-Revision: 34131
2012-11-09 19:26:58 +00:00
John Crispin 88e4d93802 a few more dts files (WIP)
SVN-Revision: 34130
2012-11-09 19:26:43 +00:00
John Crispin a30b3066ce add mtd split and atm patch
SVN-Revision: 34129
2012-11-09 19:26:30 +00:00
Felix Fietkau 46288bf98e x86: use $(strip) for the at_keyboard check
SVN-Revision: 34127
2012-11-09 10:53:36 +00:00
Felix Fietkau 0a9e05fb0e x86: only enable at_keyboard for the generic and kvm_guest subtargets to avoid hangs on alix2 and others (thx, russell)
SVN-Revision: 34126
2012-11-09 10:19:51 +00:00
Gabor Juhos 502661f685 generic: sanitize deps_initramfs list
If any filename in the intramfs dependency
list contains a colon, that causes a kernel
build error like this:

/devel/openwrt/build_dir/linux-ar71xx_generic/linux-3.6.6/usr/Makefile:58: *** multiple target patterns.  Stop.
make[5]: *** [usr] Error 2

Fix it by removing such filenames from the
deps_initramfs list.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34125
2012-11-09 09:07:29 +00:00
Luka Perkov 965c190444 cns3xxx: exit from laguna late_initcall if not running on laguna board
SVN-Revision: 34120
2012-11-08 11:31:56 +00:00
Imre Kaloz 0da0dc0f2b cns3xxx: add PPS support for laguna
Many Laguna products have on-board GPS with Pulse-per-second (PPS)
support.  This patch adds kernel support (statically) and adds
the platform data in laguna board support.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 34115
2012-11-08 05:42:31 +00:00
Imre Kaloz efcdc21824 fixup symbol selection
SMP already selects HAVE_ARM_TWD and HAVE_ARM_SCU,
ARCH_CNS3XXX already selects MIGHT_HAVE_PCI

SVN-Revision: 34114
2012-11-08 05:40:34 +00:00
Luka Perkov 4d66b749de cns3xxx: fix coding style in board script
SVN-Revision: 34113
2012-11-07 23:12:06 +00:00
John Crispin 6090ddc896 adds fon20n profile
SVN-Revision: 34112
2012-11-07 20:26:31 +00:00
John Crispin 3991526989 ramips: use kernel 3.6.6
## Booting image at 80800000 ...
   Image Name:   MIPS OpenWrt Linux-3.6.6
   Created:      2012-11-06  14:19:54 UTC

 System Control Status = 0x20440000
   Image Type:   MIPS Linux Kernel Image (lzma compressed)
   Data Size:    3560768 Bytes =  3.4 MB
   Load Address: 80000000
   Entry Point:  80000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
No initrd
## Transferring control to Linux (at address 80000000) ...
## Giving linux memsize in MB, 32

Starting kernel ...

[    0.000000] Linux version 3.6.6 (daniel@localhost.localdomain) (gcc version 4.6.4 20121001 (prerelease) (Linaro GCC 4.6-2012.10) ) #2 Tue Nov 6 16:19:48 IST 2012
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU revision is: 0001964c (MIPS 24KEc)
[    0.000000] Ralink RT3052 id:1 rev:2 running at 384.00 MHz
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 02000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x00000000-0x01ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00000000-0x01ffffff]
[    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
[    0.000000] Kernel command line:  console=ttyS1,57600n8 board=ALL0239-3G mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,896k(kernel),6976k(rootfs),7872k@0x50000(firmware) rootfstype=squashfs,jffs2
[    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] Writing ErrCtl register=0000c388
[    0.000000] Readback ErrCtl register=0000c388
[    0.000000] Memory: 27048k/32768k available (2015k kernel code, 5720k reserved, 498k data, 2676k init, 0k highmem)
[    0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:48
[    0.000000] console [ttyS1] enabled, bootconsole disabled
[    0.000000] console [ttyS1] enabled, bootconsole disabled
[    0.010000] Calibrating delay loop... 255.59 BogoMIPS (lpj=1277952)
[    0.090000] pid_max: default: 32768 minimum: 301
[    0.100000] Mount-cache hash table entries: 512
[    0.110000] NET: Registered protocol family 16
[    0.120000] MIPS: machine is Allnet ALL0239-3G
[    0.140000] bio: create slab <bio-0> at 0
[    0.150000] Switching to clocksource MIPS
[    0.160000] NET: Registered protocol family 2
[    0.170000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[    0.180000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.200000] TCP: Hash tables configured (established 1024 bind 1024)
[    0.210000] TCP: reno registered
[    0.220000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.230000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.240000] NET: Registered protocol family 1
[    5.460000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    5.470000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    5.490000] msgmni has been set to 52
[    5.500000] io scheduler noop registered
[    5.510000] io scheduler deadline registered (default)
[    5.520000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    5.530000] serial8250: ttyS0 at MMIO 0x10000500 (irq = 13) is a 16550A
[    5.550000] serial8250: ttyS1 at MMIO 0x10000c00 (irq = 20) is a 16550A
[    5.560000] physmap platform flash device: 00800000 at bf000000
[    5.580000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID 0x001000
[    5.600000] Amd/Fujitsu Extended Query Table at 0x0040
[    5.610000]   Amd/Fujitsu Extended Query version 1.3.
[    5.620000] number of CFI chips: 1
[    5.620000] 6 cmdlinepart partitions found on MTD device physmap-flash.0
[    5.640000] Creating 6 MTD partitions on "physmap-flash.0":
[    5.650000] 0x000000000000-0x000000030000 : "u-boot"
[    5.660000] 0x000000030000-0x000000040000 : "u-boot-env"
[    5.680000] 0x000000040000-0x000000050000 : "factory"
[    5.690000] 0x000000050000-0x000000130000 : "kernel"
[    5.700000] 0x000000130000-0x000000800000 : "rootfs"
[    5.710000] mtd: partition "rootfs" set to be root filesystem
[    5.730000] split_squashfs: error occured while reading from "physmap-flash.0"
[    5.740000] 0x000000050000-0x000000800000 : "firmware"
[    5.760000] ramips-wdt ramips-wdt: timeout value must be 0 < timeout <= 33, using 33
[    5.780000] TCP: cubic registered
[    5.780000] NET: Registered protocol family 17
[    5.790000] 8021q: 802.1Q VLAN Support v1.8
[    5.820000] Freeing unused kernel memory: 2676k freed
[    6.490000] Button Hotplug driver version 0.4.1
- preinit -
Press the [f] key and hit [enter] to enter failsafe mode
- regular preinit -
- init -

Please press Enter to activate this console. [   10.150000] Compat-drivers backport release: compat-drivers-2012-09-04-2-gddac993
[   10.170000] Backport based on wireless-testing.git master-2012-09-07
[   10.180000] compat.git: wireless-testing.git
[   10.210000] cfg80211: Calling CRDA to update world regulatory domain
[   10.230000] cfg80211: World regulatory domain updated:
[   10.240000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   10.250000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.270000] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   10.280000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   10.300000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.310000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.430000] NET: Registered protocol family 10
[   10.760000] PPP generic driver version 2.4.2
[   10.820000] l2tp_core: L2TP core driver, V2.0
[   10.840000] l2tp_netlink: L2TP netlink interface
[   10.870000] sit: IPv6 over IPv4 tunneling driver
[   10.920000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   11.060000] NET: Registered protocol family 24
[   11.090000] nf_conntrack version 0.5.0 (464 buckets, 1856 max)
[   11.230000] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[   11.410000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   14.510000] device eth0.1 entered promiscuous mode
[   14.520000] device eth0 entered promiscuous mode
[   14.530000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
[   14.550000] br-lan: port 1(eth0.1) entered forwarding state
[   14.560000] br-lan: port 1(eth0.1) entered forwarding state
[   16.560000] br-lan: port 1(eth0.1) entered forwarding state
[   16.600000] ramips-wdt: timeout value 60 must be 0 < timeout <= 33, using 33

BusyBox v1.19.4 (2012-11-06 13:40:37 IST) built-in shell (ash)
Enter 'help' for a list of built-in commands.

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------
 BARRIER BREAKER (Bleeding Edge, r34079)
 -----------------------------------------------------
  * 1/2 oz Galliano         Pour all ingredients into
  * 4 oz cold Coffee        an irish coffee mug filled
  * 1 1/2 oz Dark Rum       with crushed ice. Stir.
  * 2 tsp. Creme de Cacao
 -----------------------------------------------------
root@OpenWrt:/#

SVN-Revision: 34111
2012-11-07 20:26:21 +00:00
John Crispin 480892226d ramips: add HAVE_CLK to Kconfig on all ramips socs
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 34110
2012-11-07 20:26:04 +00:00
John Crispin feb31be6af ramips: add linux-3.6 configuration for ramips socs
Signed-off-by: Daniel Golle <dgolle@allnet.de>

 create mode 100644 target/linux/ramips/rt288x/config-3.6
 create mode 100644 target/linux/ramips/rt305x/config-3.6
 create mode 100644 target/linux/ramips/rt3883/config-3.6

SVN-Revision: 34109
2012-11-07 20:25:55 +00:00
John Crispin ca1fcaed5b ramips: port patches to linux-3.6
Signed-off-by: Daniel Golle <dgolle@allnet.de>

 create mode 100644 target/linux/ramips/patches-3.6/001-mips-add-cp0-compare-irq-function.patch
 create mode 100644 target/linux/ramips/patches-3.6/010-mtd_fix_cfi_cmdset_0002_erase_status_check.patch
 create mode 100644 target/linux/ramips/patches-3.6/011-mtd-cfi_cmdset_0002-force-word-write.patch
 create mode 100644 target/linux/ramips/patches-3.6/100-mips-ralink-core.patch
 create mode 100644 target/linux/ramips/patches-3.6/101-rt288x_serial_driver_hack.patch
 create mode 100644 target/linux/ramips/patches-3.6/102-rt288x-pci-driver-hook.patch
 create mode 100644 target/linux/ramips/patches-3.6/103-ethernet.patch
 create mode 100644 target/linux/ramips/patches-3.6/104-ramips-watchdog-driver.patch
 create mode 100644 target/linux/ramips/patches-3.6/105-ramips-spi-driver.patch
 create mode 100644 target/linux/ramips/patches-3.6/105-usb_dwc_otg.patch
 create mode 100644 target/linux/ramips/patches-3.6/106-rt3883-pci-support.patch
 create mode 100644 target/linux/ramips/patches-3.6/200-rt3883-ehci-glue.patch
 create mode 100644 target/linux/ramips/patches-3.6/201-rt3883-ohci-glue.patch

SVN-Revision: 34108
2012-11-07 20:25:34 +00:00
Jonas Gorski f2bb7754f5 bcm63xx: Enable endian check support for ath9k pci fixup.
Some ath9k caldatas need to be "endian checked".
This patch allows selecting wether to enable endian check or not.
Endian check is disabled by default.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 34105
2012-11-07 09:01:03 +00:00
Imre Kaloz f2b75b517b fixup typos in the compex patch
SVN-Revision: 34104
2012-11-07 07:51:24 +00:00
Jonas Gorski a50d121d8e linux: export bcm963xx_tag.h to userspace
Export bcm963xx_tag.h so mtd can use it without using kernel includes.

Signed-off-by: Catalin Patulea <cat@vv.carleton.ca>
[jonas.gorski@gmail.com: fixup bcm63xx patches, completely remove header
 from original location, refresh patches, use  a more matching patch
 number, port to 3.6]
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>

SVN-Revision: 34103
2012-11-06 15:21:46 +00:00
Luka Perkov 865933a0ec cns3xxx: refresh kernel config file
SVN-Revision: 34102
2012-11-06 11:16:43 +00:00
Luka Perkov 9a5c26d4ef cns3xxx: use files directory
SVN-Revision: 34101
2012-11-06 11:16:41 +00:00
John Crispin 7404e59bbd add OWRTDTB marker patch
SVN-Revision: 34100
2012-11-06 10:39:43 +00:00
John Crispin 3a1851964e add support for arv7525
SVN-Revision: 34097
2012-11-06 07:38:24 +00:00
Imre Kaloz e141cbb0f9 refresh patches
SVN-Revision: 34095
2012-11-06 05:45:12 +00:00
Imre Kaloz 1a9dfd566e add default packages
SVN-Revision: 34094
2012-11-06 05:39:08 +00:00
Jonas Gorski 0722fd9c63 linux: generic: fix split_squashfs for 3.6
_read expects the retlen to be initialized to zero, which the mtd_read
helper does. So fix it by using mtd_read instead of calling _read directly.

SVN-Revision: 34093
2012-11-06 00:48:21 +00:00
Jonas Gorski 5bc7d81a20 bcm63xx: fix SPW303V images
SPW303V also needs its CRC fixed up since increasing the image size to
4MB to prevent the dual image mode of CFE.

SVN-Revision: 34091
2012-11-05 22:50:29 +00:00
Gabor Juhos e92da5e7ae ar71xx: nuke ath79_set_usb_power_gpio helper
It is no longer used.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34088
2012-11-05 13:23:28 +00:00
Gabor Juhos f2528b1792 ar71xx: use gpio_request_one instead of ath79_set_usb_power_gpio
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34087
2012-11-05 13:23:27 +00:00
Gabor Juhos e8669729bc kernel: update linux 3.6 to 3.6.6
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34086
2012-11-05 13:22:09 +00:00
Imre Kaloz d822ecfdf8 use the mainline machname for the compex boards
SVN-Revision: 34083
2012-11-05 11:38:23 +00:00
Gabor Juhos a0dd47bbed ramips: enable USB power on the DIR-645
Closes #12422.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34082
2012-11-05 11:04:45 +00:00
Gabor Juhos 5e43b934fd linux/3.3: backport an upstream GPIO patch
The backported patch introduces new flags to
automatically export GPIOs when using the
convenience unctions gpio_request_one() or
gpio_request_array().

This will be used by ar71xx/ramips platforms.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34081
2012-11-05 11:04:43 +00:00
Gabor Juhos 829aaedcbf ramips: add restorefactory to default package set for ALL0239-3G and ALL0256N
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 34078
2012-11-05 06:58:53 +00:00
Gabor Juhos ed35253f4c ar71xx: don't use the unknown LED on the ZCN-1523-5 board
According to #12421, GPIO 1 controls the power
output on the unused lines of the LAN2 port.
Remove the LED definition in order to prevent
possible permanent hardware damage.

If someone needs that, the power-out feature can
be controlled via the GPIO sysfs interface.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34076
2012-11-04 22:08:54 +00:00
Gabor Juhos 1b744e1ca5 ar71xx: include mtd layout in the command line for ZCN-1523H-* boards
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34074
2012-11-04 21:12:20 +00:00
Gabor Juhos b78a736dc2 ar71xx: add missing Makefile entry for the ZCN-1523H-{2,5} boards
Also add the missing ATH79_MACH_ZCN_1523H_5 symbol.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34072
2012-11-04 20:15:18 +00:00
Felix Fietkau 6040b1d29a linux-3.6: fix portability of some includes files in tools/ used on the host
SVN-Revision: 34068
2012-11-04 17:01:15 +00:00
John Crispin 05fbb370dc 3.6 is not the default yet
SVN-Revision: 34065
2012-11-03 13:29:44 +00:00
John Crispin a9ad36b7f1 adds dts files and make devicetree images buildable
SVN-Revision: 34064
2012-11-02 20:07:47 +00:00
John Crispin c8ae6dac56 update ase target for 3.6
SVN-Revision: 34063
2012-11-02 20:07:41 +00:00
John Crispin dc8641f7fa add subtarget, as of 3.6 we dont seperate xway SoC
SVN-Revision: 34062
2012-11-02 20:07:36 +00:00
John Crispin dd619da4fc adds 3.6 files, patches and config
SVN-Revision: 34061
2012-11-02 20:07:26 +00:00
John Crispin 736835343c move files/ -> files-3.3/
SVN-Revision: 34060
2012-11-02 20:07:02 +00:00
John Crispin fa316620a7 prepare Makefile for 3.6
SVN-Revision: 34059
2012-11-02 20:06:51 +00:00
Gabor Juhos 0005762690 generic: make yaffs work on 3.6
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34054
2012-11-01 11:07:23 +00:00
Gabor Juhos ffcb4b0fe1 generic: rename jffs2 patches
Make room for the upcoming yaffs patches.
No functional changes.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34053
2012-11-01 11:07:16 +00:00
Daniel Dickinson 7e0f8049fa Fix feeds.conf.default when no SVN info present
SVN-Revision: 34051
2012-11-01 07:15:49 +00:00
Gabor Juhos 6c8c3ee77d generic: use mtd_* helpers in the yaffs code
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34046
2012-10-31 21:17:30 +00:00
Imre Kaloz 3c12bad276 move PCIe init to subsys init call
ARM Linux PCI/PCIe hardware intialization needs to occur before device_init
as it does not support hotplug.  I have modeled the cns3xxx PCIe init after
other ARM platforms.  Registering it early resolves resource issues occuring
during bus enumeration that occur when a device driver is linked static in
the kernel.

Instead of passing in a bitmask to enable the 2 available ports, link detect
is used to enable ports that have a valid link.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 34044
2012-10-31 20:16:53 +00:00
Gabor Juhos 07a762c4c5 kernel: update linux 3.6 to 3.6.5
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34042
2012-10-31 20:09:39 +00:00
Gabor Juhos a4126685c6 generic: split yaffs-3.2-fix patch
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34041
2012-10-31 19:33:12 +00:00
Gabor Juhos 4baeb543f0 generic: replace yaffs-2.6.39 patch
Use backported upstream patches instead.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34032
2012-10-31 15:12:45 +00:00
Gabor Juhos b888c2deab generic: replace yaffs mutex_fix patch
Use a backported patch instead.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34021
2012-10-30 21:16:24 +00:00
Gabor Juhos d54782d01a generic: replace yaffs symlink fix patch
Use a backported patch instead.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34020
2012-10-30 21:16:23 +00:00
Gabor Juhos 9a8ccc1a08 generic: rename yaffs patches
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34019
2012-10-30 21:16:21 +00:00
Florian Fainelli e14e4306c9 set earlyprintk UART to be the default Realview UART
SVN-Revision: 34015
2012-10-30 16:56:10 +00:00
Gabor Juhos 449f88df0f generic: fold yaffs_git_2010_10_20 patch to generic/files
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34013
2012-10-30 14:58:17 +00:00
Gabor Juhos 56190ed0fc generic: fold yaffs_cvs_2009_04_24 patch to generic/files
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34012
2012-10-30 14:58:13 +00:00
Gabor Juhos 7228a91a3b ar71xx: fix link speed between AR7242 and AR8327 on the RB750GL/RB751G boards
The default pll_1000 value had to be changed
in order to make it working.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33993
2012-10-29 17:24:30 +00:00
Gabor Juhos e91dc2e5b3 target: refresh all target configs with kconfig.pl
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33987
2012-10-29 10:11:05 +00:00
Imre Kaloz c0c69c974f add missing 3.6 symbols
SVN-Revision: 33986
2012-10-29 10:00:02 +00:00
Imre Kaloz 8e49dfe68a the uImage's filename will hardly change
SVN-Revision: 33985
2012-10-29 09:55:20 +00:00
Gabor Juhos f7b2089704 generic: add more symbols for 3.6
Also refresh the config file with kconfig.pl.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33984
2012-10-29 09:08:59 +00:00
Gabor Juhos e4db63fd64 ar71xx: add initial support for 3.6
The nand subtarget is not working yet.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33983
2012-10-28 19:52:02 +00:00
Gabor Juhos 87186c5ed4 kernel: update linux 3.6 to 3.6.4
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33982
2012-10-28 18:59:39 +00:00
Gabor Juhos a6549ac1cb ar71xx: remove NO_AUTOINCR flag from the NAND drivers
The flag is not present in 3.6.
Also add compatibility patches for 3.3.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33971
2012-10-28 12:21:15 +00:00
Gabor Juhos 9a37cf7ec6 generic: fix crashlog patch for 3.6
kmsg_dump() uses an iterator to receive log buffer
content since 3.5. Change the 'crashlog_do_dump'
function in order to make it compatible with the
new version.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33970
2012-10-28 09:50:50 +00:00
Gabor Juhos e2ec99889e ar71xx: ag71xx: fix build_skb arguments for 3.6
Also add a compatibility patch for 3.3

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33969
2012-10-27 17:11:06 +00:00
Gabor Juhos 7640a7cc24 generic: fix tcp_window_check patch for 3.6
Move the new entry to the end of the tcp_sysctl_table
array to fix the following error:

[    7.670000] sysctl table check failed: net/netfilter/nf_conntrack_tcp_max_retrans No data
[    7.680000] Call Trace:
[    7.680000] [<80273bc4>] dump_stack+0x8/0x34
[    7.680000] [<80128710>] __register_sysctl_table+0x374/0x3a8
[    7.690000] [<868d5034>] nf_conntrack_l4proto_unregister+0x158/0x1a0[nf_conntrack]
[    7.700000] [<868d50e4>] nf_conntrack_l4proto_register+0x68/0x21c[nf_conntrack]
[    7.710000] [<868b237c>] need_ipv4_conntrack+0x35c/0xb60[nf_conntrack_ipv4]
[    7.710000]
[    7.720000] nf_conntrack_l4proto_tcp4 :protocol register failed
[    7.720000] nf_conntrack_ipv4: can't register pernet ops
[    7.780000] nf_nat: Unknown symbol nf_nat_seq_adjust_hook (err 0)
[    7.790000] nf_nat: Unknown symbol need_ipv4_conntrack (err 0)
[    7.800000] iptable_nat: Unknown symbol nf_nat_packet (err 0)
[    7.810000] iptable_nat: Unknown symbol nf_nat_setup_info (err 0)
[    7.820000] iptable_nat: Unknown symbol nf_nat_icmp_reply_translation (err 0)
[    7.820000] iptable_nat: Unknown symbol need_ipv4_conntrack (err 0)
[    7.840000] ipt_MASQUERADE: Unknown symbol nf_nat_setup_info (err 0)
[    7.860000] nf_nat_ftp: Unknown symbol nf_nat_follow_master (err 0)
[    7.870000] nf_nat_ftp: Unknown symbol __nf_nat_mangle_tcp_packet (err 0)
[    7.890000] nf_nat_irc: Unknown symbol nf_nat_follow_master (err 0)
[    7.900000] nf_nat_irc: Unknown symbol __nf_nat_mangle_tcp_packet (err 0)

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33968
2012-10-27 15:42:25 +00:00
Imre Kaloz 50be09e1f7 instead of updating the whole file, just add the additional boards
SVN-Revision: 33966
2012-10-27 13:29:36 +00:00
Imre Kaloz 1a4f117398 rename erase size variables
SVN-Revision: 33964
2012-10-27 10:50:55 +00:00
Imre Kaloz 549d5a6e34 add support for Netgear WN802T
SVN-Revision: 33963
2012-10-27 10:48:22 +00:00
Imre Kaloz cf7aed0a76 don't enforce rootfs location
SVN-Revision: 33962
2012-10-27 10:43:47 +00:00
Imre Kaloz 702fd5cdb5 generate images for the D-Link DWL-3150 as well
SVN-Revision: 33961
2012-10-27 09:42:58 +00:00
Gabor Juhos 3a86affcdd ar71xx: enable sysupgrade for the CAP4200AG board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33960
2012-10-27 08:55:42 +00:00
Gabor Juhos e99d557c08 ar71xx: add profile and build image for the CAP4200AG
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33958
2012-10-27 08:55:40 +00:00
Gabor Juhos 9287e0c863 ar71xx: add user-space part for the CAP4200AG
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33957
2012-10-27 08:55:39 +00:00
Gabor Juhos d54c9653e9 ar71xx: add support for the Senao CAP4200AG board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33956
2012-10-27 08:55:38 +00:00
Gabor Juhos 3b7cb4eb4a ar71xx: add ath79_wmac_disable_[25]ghz helpers
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33955
2012-10-27 08:55:37 +00:00
Gabor Juhos e8fc46b7c5 generic: allow to disable [25]GHz support in ath9k via platform data
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33954
2012-10-27 08:55:36 +00:00
Gabor Juhos c92998f9d9 generic: use mtd_read in myloader parser
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33952
2012-10-27 07:57:59 +00:00
Gabor Juhos 269872fe1e ar71xx: use mtd_read in wrt160nl_part
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33951
2012-10-27 07:57:58 +00:00
Gabor Juhos 973eda6077 ar71xx: use mtd_read in tplinkpart
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33950
2012-10-27 07:57:57 +00:00
Gabor Juhos 28f3adc2ed ar71xx: generate 4,8,16M images for the WPE72
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33949
2012-10-27 07:57:55 +00:00
Gabor Juhos ee9376d153 generic: swconfig: use led_set_brightness in LED control code
The 'led_brightness_set' function has
been renamed to 'led_set_brightness'
in recent ernels. Use the new name and
add a compatibility patch for 3.3.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33946
2012-10-26 18:58:18 +00:00
Gabor Juhos 1127781d40 generic: add missing symbols for 3.6
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33945
2012-10-26 18:58:15 +00:00
Gabor Juhos ff481a5518 ar71xx: reject TP-Link images containing a bootloader
The original TP-Link firmware images can be flashed via
the sysupgrade command, however those may contain a
bootloader. Flashing such an image via sysupgrade
bricks the board, and it can't be recovered without
a serial console.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33944
2012-10-26 18:58:13 +00:00
Gabor Juhos db5eea6acd ramips: use correct key code for the RFKILL switch on the TEW-691GR
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33943
2012-10-26 18:53:44 +00:00
Florian Fainelli c691d165c7 add 3.6 kernel configuration
SVN-Revision: 33942
2012-10-26 15:24:19 +00:00
Florian Fainelli 9af90aa80c add missing 6345 clock bits patch to 3.6 patches
SVN-Revision: 33941
2012-10-26 15:24:14 +00:00
Florian Fainelli fad6afdf06 add some more 3.6 config symbols
SVN-Revision: 33940
2012-10-26 15:24:10 +00:00
Florian Fainelli 8d69af7c9f add preliminary support for 3.6 kernel
SVN-Revision: 33936
2012-10-25 21:16:51 +00:00
Hauke Mehrtens 6a699a8ae8 brcm47xx: check for .ELF header in partition parser
The image format for the wgt634u is different from the normal format.
Without this patch the partition parser detects a 128kb bigger
partition after every update.

This closes #11420

Thank you b.sander for the patch.

SVN-Revision: 33935
2012-10-25 19:49:20 +00:00
Hauke Mehrtens d4ef5de604 kernel: add PCI id 14e4:4350 to ssb
* 14e4:4350 is found on a Broadcom BCM43222.
* remove some warnings when using a BCM43222.

SVN-Revision: 33929
2012-10-25 15:50:47 +00:00
Felix Fietkau 1e2962e63c kernel: add a few missing config symbols for x86. added to generic config because of dependencies, so that kernel_menuconfig does not remove them again
SVN-Revision: 33923
2012-10-25 15:11:45 +00:00
Felix Fietkau 5591188ac3 kernel: refresh config files using kconfig.pl
SVN-Revision: 33922
2012-10-25 15:11:40 +00:00
Hauke Mehrtens dca633f1c8 kernel: update bcma and ssb to master-2012-10-18 from wireless-testing
* update the flash driver for bcm47xx to use the stubs already in bcma
* do some misc enhancements to the flash drivers for bcm47xx

SVN-Revision: 33920
2012-10-25 14:33:47 +00:00
Florian Fainelli dea2da55df fix Ethernet DMA for 636x and 6328 after r33916
SVN-Revision: 33918
2012-10-25 11:54:41 +00:00
Florian Fainelli 917670922b add support for the Dynalink RTA770BW board
This board id is used by the Siemens Gigaset SE515 router.

SVN-Revision: 33917
2012-10-24 21:25:22 +00:00
Florian Fainelli bdfcbb8bee make BCM6345 Ethernet DMA changes runtime checks
The semantics of the DMA engine are identical, we just have a couple of
special case handling.

SVN-Revision: 33916
2012-10-24 21:25:10 +00:00
Florian Fainelli df6f9072ab ARM: fix XZ decompressor stub build failure on strstr()
SVN-Revision: 33915
2012-10-24 15:57:31 +00:00