Commit Graph

16350 Commits (28a2901cbace14541e1da47fdbaf1ccc7dc9c027)

Author SHA1 Message Date
Rafał Miłecki b9d8c81018 bcm53xx: rename PHY patches to use 07* prefix
This is not a strict rule but it matches better this one:
7xx - network / phy driver patches

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-08-14 11:22:58 +02:00
Jo-Philipp Wich b9b665ae49 mvebu: add ClearFog .tar.gz bundle
The previous image building code rework removed the rootfs.tar.gz with embedded
kernel and dtb build artifact which is required to build suitable SD images.

Reintroduce a .tar.gz artifact locally which embeds kernel and dtb, similar to
how the old code handled it.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-08-13 16:24:04 +02:00
Jo-Philipp Wich 3c2c31bb66 kernel: backport upstream challenge ACK fix (CVE-2016-5696)
Yue Cao claims that current host rate limiting of challenge ACKS
(RFC 5961) could leak enough information to allow a patient attacker
to hijack TCP sessions. He will soon provide details in an academic
paper.

Backports upstream commit 75ff39ccc1bd5d3c455b6822ab09e533c551f758
to the used LEDE kernel versions.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-08-13 16:23:23 +02:00
Jonas Gorski cf8da98e94 brcm63xx: switch to board based failsafe networking
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2016-08-13 15:50:23 +02:00
Jonas Gorski 0ddae04c22 brcm63xx: backport mtd of node changes from upstream
Should fix parser data containing uninitialized values for of probed
physmap flashes, which could break e.g. the redboot parser.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2016-08-13 15:49:35 +02:00
Daniel Golle a9b1a429ab oxnas: set preinit network interface
set network interface for failsafe mode to eth0 for all boards

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2016-08-11 17:16:03 +02:00
Felix Fietkau 592c0a1cd2 ramips: fix legacy image build
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-08-11 17:07:37 +02:00
Felix Fietkau 9d56ec6244 kernel: fix crashlog issues on highmem systems
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-08-11 17:02:48 +02:00
Rafał Miłecki fa350d5aba bcm53xx: add profiles for Buffalo devices
This generates proper images when using CONFIG_TARGET_MULTI_PROFILE and
CONFIG_TARGET_PER_DEVICE_ROOTFS.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-08-11 12:17:06 +02:00
Rafał Miłecki b835d7e811 bcm53xx: include USB modules in images for devices with USB ports
This allows using USB out of the box.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-08-11 11:59:28 +02:00
Rafał Miłecki 0b9de8daa7 bcm53xx: add profiles for all other (SoftMAC) devices
Thanks to this images for SoftMAC devices don't get brcmfmac anymore and
b43 is added for devices with (quite poor) support only.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-08-11 11:31:46 +02:00
Felix Fietkau eae422eb94 lantiq: fix some ethernet driver SMP issues
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-08-11 10:45:33 +02:00
Rafał Miłecki d378a7c4f7 bcm53xx: convert (disabled) Netgear R8500 image to own profile
It should be the last device with FullMAC chipset to convert.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-08-11 08:28:41 +02:00
Rafał Miłecki 931d309203 bcm53xx: add profile with brcmfmac for Netgear R7900
It's one more device with FullMAC that got forgotten in the previous
commit.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-08-11 07:46:17 +02:00
Rafał Miłecki c769c1b584 bcm53xx: add profiles for devices with FullMAC chipsets
This allows building images for selected devices with brcmfmac only
(without b43 which is for SoftMAC devices).

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Jo-Philipp Wich <jo@mein.io>
2016-08-10 20:41:53 +02:00
Chuanhong Guo 0f73801f4f ramips: Add support for Thunder Timecloud
Thunder Timecloud is a small NAS with MT7621A. It has 1 USB port and an
SD Card slot. There is no wireless cards.

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2016-08-10 03:04:08 +02:00
Mathias Kresin 7f22580078 kernel: adm6996: set carrier status
Due to the missing carrier status set, the interface wasn't usable on a
BTHOMEHUB2B after ip link down and up as it is done in preinit.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-08-10 03:04:08 +02:00
Jimmy Zhong 2b1f4945b1 ramips: Add support for TEW-714TRU
Signed-off-by: Jimmy Zhong <mb300sd@mb300sd.net>
2016-08-10 03:03:50 +02:00
Mathias Kresin 5947f7f85e lantiq: enable cpu temp driver for selected boards
According to the author of the cpu temp driver, not all xrx200 boards
have a cpu temperature sensor. For that reason enable the sensor only
for tested boards.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-08-10 02:04:31 +02:00
Mathias Kresin 0b327c1652 lantiq: board.d: set lan mac address only where necessary
Do not set the lan mac address for boards which having the lan mac
address already set in device tree source file.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-08-10 02:04:31 +02:00
Mathias Kresin 47d3909415 lantiq: drop duplicate and now unused "lantiq, eth-mac" binding
The device tree binding and the associated code duplicates functionality
already patched into the etop driver. The compatible string isn't used
any more. Therefore the whole code can be dropped.

The "mac-increment" property allowed to increment a mac address received
via kernel cmdline. This functionality isn't used by any device and
should be added as etop driver device tree property if required again.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-08-10 02:04:31 +02:00
Mathias Kresin 91d5067091 lantiq: use the etop driver DT bindings only
Use the generic mtd-mac-address dts property to get a mac address from
flash instead of the lantiq specific one.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-08-10 02:04:31 +02:00
Mathias Kresin 1b7d6583a5 lantiq: fix mac address increments
Use the same mac address increment in device tree source file and
userspace.

Don't add a mac address increment to either the only mtd mac-address or
to all mac-addresses.

Fix a typo in the TDW89X0.dtsi file to add an increment.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-08-10 02:04:31 +02:00
Mathias Kresin a7cce111db lantiq: drop orphaned eeprom-handling code branches
All device tree nodes are using the named properties now and the code
path handling the reg property isn't required any more.

The code related to the ath,eep-flash property has been reformatted to
be better readable.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-08-10 02:04:31 +02:00
Mathias Kresin 12fe4b5798 lantiq: use ath, eep-flash/mac-offset for ath eep nodes
No functional change, just easier to get what's the purpose of the hex
values.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-08-10 02:04:31 +02:00
Jo-Philipp Wich 21f460a5db ath25: fix duplicate LZMA compression
The conversion to the new image building code accidentally caused the kernel
image to get compressed twice, leading to boot failures when kernel and rootfs
are flashed separately.

The sysupgrade images have been unaffected by this. Also restore the elf
kernel build artifact while we're at it.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-08-09 17:28:19 +02:00
Jonas Gorski bebcb81da5 ramips: switch from 24kec to 24kc
Since the only difference between 24Kec and 24Kc is the addition of DSP
ASE support, and we don't use it anymore, there is no need to keep 24Kec
as a separate cpu type.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2016-08-08 11:29:56 +02:00
Felix Fietkau 1b9dbb8532 Revert "kernel: remove long obsolete gpio spi controller driver patch"
This reverts commit 9e62a7668c.
2016-08-04 23:10:15 +02:00
Felix Fietkau 6175115541 ar71xx: add missing LZO support select for routerboard devices
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-08-04 23:02:50 +02:00
Felix Fietkau 002b453687 kernel: add -mtune=34kc to MIPS CFLAGS when building for mips32r2
This provides a good tradeoff across at least 24Kc-74Kc, while also
producing smaller code.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-08-04 22:53:01 +02:00
Felix Fietkau 7c874d18f5 kernel: mark compression modules as hiddden to obsolete the compressor kconfig hack
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-08-04 20:53:02 +02:00
Felix Fietkau 93fb6ce05b kernel: mark kmod-udptunnel as hiddden to replace the NET_UDP_TUNNEL kconfig hack
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-08-04 20:53:02 +02:00
Felix Fietkau 577f873daf kernel: remove unused morse led trigger driver
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-08-04 20:53:02 +02:00
Felix Fietkau 9e62a7668c kernel: remove long obsolete gpio spi controller driver patch
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-08-04 20:53:02 +02:00
Felix Fietkau 99dd163bc3 kernel: remove a long obsolete unlzo decompressor fix
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-08-04 20:53:02 +02:00
Felix Fietkau 08fe1c6dbc kernel: remove obsolete slab tuning patch
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-08-04 20:53:02 +02:00
Felix Fietkau 56cf1adc50 kernel: remove esfq qdisc
It has been obsolete for years now

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-08-04 18:27:54 +02:00
Felix Fietkau 7bf3695b02 kernel: clean up 260-crypto_test_dependencies.patch to get rid of some more kernel bloat
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-08-03 19:16:32 +02:00
John Crispin 281483e097 ramips: enable nand support for mt7621
this makes sysupgrade work on the ERX

Signed-off-by: John Crispin <john@phrozen.org>
2016-08-03 15:30:13 +02:00
John Crispin 8e75630d1d ramips: updated remaining profiles to the new image building code
Signed-off-by: John Crispin <john@phrozen.org>
2016-08-03 15:30:13 +02:00
Lucian Cristian d3b21bb2bb x86: enable CPU frequency scaling
CPU frequency scaling enables the operating system to scale the CPU
frequency up or down in order to save power. CPU frequencies can be
scaled automatically depending on the system load, in response to ACPI
events, or manually by userspace programs.

Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
2016-08-03 15:30:13 +02:00
Florian Eckert 828e25e325 lantiq: add cpu temperatur sensor driver for xrx200
Signed-off-by: Florian Eckert <Eckert.Florian@googlemail.com>
2016-08-03 15:30:13 +02:00
Felix Fietkau 9abbaa9539 build: remove MIPS dsp/dsp2 CPU_SUBTYPE
There does not seem to be any meaningful difference in generated code.
This will save some time and space on snapshot builds

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-08-03 14:56:45 +02:00
Felix Fietkau fb35ac857f ar71xx: remove useless minimal/ath5k profiles
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-08-02 13:51:13 +02:00
Felix Fietkau 349a3a127c omap: remove CONFIG_SND_DEBUG override
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-08-02 08:17:28 +02:00
Felix Fietkau 0a9fdeca6e kernel: add missing config symbol
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-08-02 08:16:44 +02:00
Felix Fietkau 941ebafda0 lantiq: enable missing ath10k firmware for BT Home Hub 5A
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-08-01 18:32:36 +02:00
Jo-Philipp Wich 4d9fc1bd44 apm821xx: fix IB image building
Change the image build code to generate the DTB files as part of the kernel
build phase in order to fix the image build in the ImageBuilder environment.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-08-01 17:59:16 +02:00
Felix Fietkau df3a2ca1a9 kernel: re-enable CONFIG_SND_VERBOSE_PROCFS (FS#66)
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-08-01 13:36:05 +02:00
diizzyy 1bcad76395 ar71xx: Make wget2nand look for LEDE project firmware files
Make wget2nand aware of the new file names

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2016-07-26 08:39:36 +02:00
dissent1 f3fbc80718 ipq806x: fix MAC_POWER_SEL for Netgear R7800
Fixes instability/corruption on the ethernet interface connected to port0 on the switch on Netgear R7800 as well.

Signed-off-by: Josh Bendavid <joshbendavid@gmail.com>
Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
2016-07-26 08:39:36 +02:00
P.Wassi 686617ae39 ramips: Rename TP-Link Archer C50 LEDs
Rename LEDs in TP-Link Archer C50 from [manufacturer name]
to [board name] ("tp-link" -> "c50")

Signed-off-by: P.Wassi <p.wassi@gmx.at>
2016-07-26 08:39:36 +02:00
P.Wassi dbf107cd2b ramips: Improve TP-Link Archer C20i support
Improve / finalise TP-Link Archer C20i support.

Signed-off-by: P.Wassi <p.wassi@gmx.at>
2016-07-26 08:39:36 +02:00
Daniel Gonzalez 4ab33a3002 brcm63xx: fix CT-536p/CT-5621T support
Fix support for the Comtrend  CT-536+, CT-5361 and CT-5621T routers support.

Currently the firmware is broken for these routers, because there is a missing
bar in the code at the DTS file avoiding to match with DTS stuff at the kernel. This
causes the router boots without ethernet connectivity. The status led also has a typo.

Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2016-08-01 10:12:15 +02:00
Felix Fietkau ea6a3be62e kernel: silence a false positive uninitialized variable warning
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-08-01 09:52:17 +02:00
Jonas Gorski 532eb5f581 ipq806x: fix boot hang if cmdline contains words with r in the middle
The ATB DTB mangle code will enter an infinite loop if it encounters a
word in the command line that contains an r in the middle of the word.

Fix this by increasing ptr everytime before invoking strchr, ot avoid
finding the same r again.

This fixes booting at least on Netgear R7500v1, which contains
"ubi.mtd=rootfs" in its commandline, triggering the misbehaviour.

Fixes: 0ddcbee261 ("ipq806x: activate ATAG DTB mangle and EA8500 rootblock in dts")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2016-08-01 00:13:35 +02:00
Felix Fietkau ba1aa4e33b mvebu: fix NAND flash issues (FS#67)
Remove the previous PIO delay patch and add a revert patch for a faulty
upstream commit, which seems to have introduced this issue in the first
place

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-31 20:31:45 +02:00
Felix Fietkau 5d9a4c210d imx6: clean up / fix ventana image build code
Fix ubifs mkfs options
Use standard Build/* commands instead of doing everything in the hackish
ubi-boot-overlay template
Fix bootfs.tar.gz build error

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-31 19:35:05 +02:00
Felix Fietkau 468a9b7a77 imx6: use ubinize-image.sh to fix build with per-device rootfs
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-31 19:35:05 +02:00
Felix Fietkau df68d6eb15 brcm63xx: fix build with per-device rootfs
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-31 13:17:51 +02:00
Felix Fietkau 62d4665551 ipq806x: add missing sysupgrade-nand => sysupgrade-tar change
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-31 13:05:11 +02:00
Felix Fietkau 63b525dd6b image: add a helper variable for getting kernel/rootfs from within image Build/* templates
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-31 12:25:25 +02:00
Felix Fietkau 9201e88f51 kernel: remove hostap driver
It has been marked as broken for well over a month now and nobody has
complained.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-31 12:25:24 +02:00
Felix Fietkau 467dee32ed octeon: increase block2mtd rootfs probe timeout on ER
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-30 14:10:33 +02:00
Felix Fietkau 67e764c6ca octeon: pad squashfs sysupgrade image rootfs
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-30 14:10:33 +02:00
Felix Fietkau 77b16bacb1 octeon: drop unsupported jffs2 feature flag
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-30 14:10:33 +02:00
Felix Fietkau 2192a029d3 octeon: fix sysupgrade images
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-30 13:10:29 +02:00
Felix Fietkau 9a3852bf8c kernel: fix crashlog regression on x86
Check memblock regions for sufficient size before attempting to use
them. Allow checks for multiple memblock regions until a suitable one is
found.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-30 12:25:57 +02:00
Jo-Philipp Wich 18c622a1f2 ath25: rework image building
* Remove legacy macros
* Emit generic LZMA and Gzip kernel images from the combined device recipe
* Rename combined device to generic

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-07-29 16:53:03 +02:00
Jo-Philipp Wich db49dd894e build: rename sysupgrade-nand to sysupgrade-tar
Now that the "sysupgrade-nand" step is used by non-NAND targets as well,
rename it to "sysupgrade-tar" to make it more generic.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-07-29 16:53:03 +02:00
Jo-Philipp Wich fccc4298df octeon: clean up image build code
Use the generic "sysupgrade-nand" build step to pack the sysupgrade file,
it performs the same steps as the inline "tar-file" macro.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-07-29 16:53:03 +02:00
Felix Fietkau 119b4422f8 apm821xx: only attempt to mount /boot on MyBook Live
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-29 10:18:09 +02:00
Hauke Mehrtens 47cce1d5e4 lantiq: fix switch configuration for EASY80920
The device tree description misses some Ethernet ports and there was no
model specified for this board. In addition there was no switch
specific default configuration created.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2016-07-28 22:42:16 +02:00
Felix Fietkau 6b5a418512 kernel: fix crashlog issues on various architectures
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-28 21:26:37 +02:00
Felix Fietkau eb28a0cde6 lantiq: fix WBMR-300HPD switch port assignment
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-28 21:25:42 +02:00
Jo-Philipp Wich 3bb2b46bc3 octeon: fix image build
After b47f438 "build: remove image prefix from kernel files in KDIR", the
kernel image in $(KDIR) has a different name and could not be found by the
tar-file build step anymore, leading to the following error on the build
servers:

  cp: cannot stat `.../linux-octeon/lede-octeon-generic-kernel.bin': No such file or directory
  make[4]: *** [.../linux-octeon/tmp/lede-octeon-generic-ext4-sysupgrade.tar] Error 1

Adjust the path to the source kernel image in order to fix the problem.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-07-28 19:44:19 +02:00
Matthias Schiffer adbbfb7ff9
ar71xx: don't use D-Link DIR-505 status LED as ethernet indicator
The stock firmware uses the single LED as status indicator only. Using the
same LED both for status and as ethernet indicator is uncommon, and has
been confusing users who were using the device as a WLAN mesh node (so the
LED was just off, as no ethernet was connected).

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2016-07-28 15:59:04 +02:00
Matthias Schiffer 500a67a167
ar71xx: add revision detection for D-Link DIR-505 A1/A2
The A1 image also works on the A2, correctly set AR71XX_MODEL in this case.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2016-07-28 15:44:52 +02:00
Rafał Miłecki f6a86ba066 bcm53xx: enable kernel symbols/drivers needed for BCM53573
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2016-07-28 14:05:41 +02:00
Rafał Miłecki 2552e9319e bcm53xx: backport DTS patches for USB 2.0 and Tenda AC9
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2016-07-28 12:59:23 +02:00
Rafał Miłecki a3be48593b bcm53xx: refresh kernel patches
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2016-07-28 12:45:02 +02:00
John Crispin 96fa9aa13b ar71xx: add a missing ;; to ar71xx.sh
commit 42305ae24a ("ar71xx: add support for gl-mifi")

was missing a ;; breaking boot up

Signed-off-by: John Crispin <john@phrozen.org>
2016-07-24 11:17:34 +02:00
Rafał Miłecki 846eca673f b53: allow ports with higher numbers than CPU port
Our code was assuming CPU port uses the highest number. My BCM53573
device has eth0 connected to port 8 and eth1 connected to port 5. While
working on support for it I tried to:
1) Enable all ports (including port 8)
2) Set CPU port to 5

I noticed port 8 is not accessible anymore. It was just a development
process but it seems like something worth fixing anyway.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Acked-by: Jonas Gorski <jonas.gorski@gmail.com>
2016-07-24 06:38:30 +02:00
dani cea917c30b brcm63xx: fix HG556a C button
One button of the HG556a-C has the wrong GPIO pin defined in the dts file,
fix it

Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>
2016-07-24 06:38:30 +02:00
P.Wassi 525b9edc8a ramips: unify etc/board.d/01_leds configuration
Introduce an optional parameter at the local set_usb_led and
set_wifi_led function such that they can take a triggering
device. If no parameter is passed, behaviour is unchanged.
Signed-off-by: P.Wassi <p.wassi@gmx.at>
2016-07-24 06:38:30 +02:00
Zhao Gang 42305ae24a ar71xx: add support for gl-mifi
This add initial support for gl-mifi.
Product page: http://www.gl-inet.com/mifi/

Signed-off-by: Zhao Gang <gang.zhao.42@gmail.com>
2016-07-24 06:38:30 +02:00
Michael Lee 0d5277f73f ramips: dch-m225 don't have ethernet. default enable wifi
Signed-off-by: Michael Lee <igvtee@gmail.com>
2016-07-24 06:38:30 +02:00
Paul Wassi 104114fe00 ramips: remove indentation in etc/board.d/01_leds
Remove indentation at end of line in base-files/etc/board.d/01_leds
Signed-off-by: Paul Wassi <p.wassi@gmx.at>
2016-07-24 06:38:29 +02:00
John Crispin 6674006bd0 ramips: add missing i2s alias
Signed-off-by: John Crispin <john@phrozen.org>
2016-07-24 06:38:29 +02:00
Matthias Schiffer 9687341808
ar71xx: clean up legacy-devices.mk
Several legacy images were not buildable because of missing profile
definitions in legacy-devices.mk since MultiProfile was removed. Update
legacy-devices.mk to provide all necessary profiles, and change ordering
to match legacy.mk.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2016-07-27 17:27:19 +02:00
Felix Fietkau b8cd996d92 mvebu: limit image builds to profile selection
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-26 08:37:59 +02:00
Felix Fietkau 9945a1dca5 build: remove cpio.gz and tar.gz from regular filesystem types
They are not used to produce regular firmware images anyway. Instead,
call their build templates directly if enabled in the config

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-25 12:43:39 +02:00
Felix Fietkau 33c8d35375 image: remove shell calls from legacy ubi/ubifs image code
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-25 12:37:50 +02:00
Felix Fietkau 064bcdc259 kirkwood: fix UBIFS_OPTS variable in image build
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-25 12:30:19 +02:00
Christian Lamparter 3f506bdbb0 apm821xx: fix atheros PCIe cards on the MR24
The consolidation of the MR24 and WNDR4700 subtargets
into the nand subtarget broke MR24's atheros wlan.
This was because the wndr4700's board code used a
pci_fixup routines to supply the ath9k module with
the calibration data.

This is not necessary on the MR24 as it has standard
mini-pcie ports. Hence the two AR9380 mini-pcie cards
do not need any calibration data overrides.

Cc: chrisrblake93@gmail.com
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2016-07-25 10:38:48 +02:00
Christian Lamparter 08257a4053 apm821xx: use lzma compression for the initramfs images
The MR24's u-boot takes it sweet time decompressing the
LZMA-packed initramfs image. A user reported that
compared to the old gzip method in v2: it "takes a ton
longer to decompress like 4\x the old boot time for
decompression".

This patch also fixes a issue with the WNDR4700's initramfs
image getting to big and causing the following u-boot crash
during the decompression:

"Uncompressing Multi-File Image ... Error: inflate() returned -5
out-of-mem or overwrite error - must RESET board to recover"

This patch fixes both issues by reverting the MR24's initramfs
compression method back to gzip. And choosing to compress the
initramfs within the initramfs image as LZMA by default.

Cc: chrisrblake93@gmail.com
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2016-07-25 10:38:11 +02:00
Felix Fietkau 07577c5ebe tools: bring back genext2fs for apm821xx
This reverts commit 8c68c104ea.
It is used for apm821xx, which needs ext2 (not ext4) images for some
devices.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-23 19:37:20 +02:00
Alexey Brodkin 18f368fa35 linux: Get rid of 000-keep_initrafs_the_default.patch
With that patch in place for initramfs no additional options are
reported for "/" partition. What's really important is missing
info about sizes. Which in its turn makes opkg think that there's
no space on "/" partition to install software.

I understand that's a sort of corner-case, people rarely install
packages on ramfs but anyways why not?

Just in case that's what I see with the patch:
---------------------->8--------------------
root@lede:/# cat /proc/mounts
rootfs / rootfs rw 0 0
proc /proc proc rw,nosuid,nodev,noexec,noatime 0 0
sysfs /sys sysfs rw,nosuid,nodev,noexec,noatime 0 0
tmpfs /tmp tmpfs rw,nosuid,nodev,noatime 0 0
tmpfs /dev tmpfs rw,nosuid,relatime,size=512k,mode=755 0 0
devpts /dev/pts devpts rw,nosuid,noexec,relatime,mode=600 0 0
debugfs /sys/kernel/debug debugfs rw,noatime 0 0
---------------------->8--------------------

And without:
---------------------->8--------------------
root@lede:/# cat /proc/mounts
rootfs / rootfs rw,size=256168k,nr_inodes=32021 0 0
proc /proc proc rw,nosuid,nodev,noexec,noatime 0 0
sysfs /sys sysfs rw,nosuid,nodev,noexec,noatime 0 0
tmpfs /tmp tmpfs rw,nosuid,nodev,noatime 0 0
tmpfs /dev tmpfs rw,nosuid,relatime,size=512k,mode=755 0 0
devpts /dev/pts devpts rw,nosuid,noexec,relatime,mode=600 0 0
debugfs /sys/kernel/debug debugfs rw,noatime 0 0
---------------------->8--------------------

Note how different is entry for rootfs.

And given there's no known rationale for that patch we're
getting rid of it.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Jonas Gorski <jonas.gorski@gmail.com>
Cc: Rafał Miłecki <zajec5@gmail.com>
Cc: John Crispin <john@phrozen.org>
Cc: Felix Fietkau <nbd@nbd.name>
2016-07-23 19:04:37 +02:00
Alexey Brodkin 84a1a0edf0 sunxi/pcduino3: Remove selection of absent rtl8188eu
Since commit 217a643755 "wireless: remove rtl8188eu (staging)"
there's no point in selection of the missing module.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: John Crispin <john@openwrt.org>
Cc: Zoltan Herpai <wigyori@uid0.hu>
2016-07-23 12:27:42 +02:00
Felix Fietkau 8fb89f7e73 ledtrig-usbdev: fix duplicate match detection
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-23 10:30:45 +02:00
Felix Fietkau f1e085adfe ar71xx: add ath10k firmware to profile defaults where ath10k is used
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-22 16:06:39 +02:00
Felix Fietkau 39429b3d20 apm821xx: rework image build code for MyBook Live
Eliminate redundant mkfs calls, preparation for upcoming image build
core rework

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-22 12:49:57 +02:00
Felix Fietkau 3886644632 apm821xx: add DEVICE_DTS_DIR variable, remove redundant DEVICE_VARS entry
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-22 12:49:57 +02:00
Felix Fietkau 44c39d5812 apm821xx: add missing default profiles for subtargets
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-22 09:48:12 +02:00
Christian Lamparter 9e0fd1b52a apm821xx: add support for the Netgear Centria N900 WNDR4700/WNDR4720
This patch adds support for Netgear Centria N900 WNDR4700/WNDR4720

hardware highlights:

CPU:	AMCC PowerPC APM82181 Rev. E at 1000 MHz (PLB=166, OPB=83, EBC=83 MHz)
	Security support, Boot ROM Location NAND wo/ECC 2k page (8 bits)
	32 kB I-Cache 32 kB D-Cache, 256 kB L2-Cache, 32 kB OnChip Memory
Board:	AMCC APM82181 Evaluation Board, PCIE0/SATA1, 1*USB OTG
DRAM:	256 MB (ECC not enabled, 500 Mb/s, 32-bit, CL3)
NAND:	128 MiB (SLC, erase size: 128 KiB, page size: 2048, OOB size: 64)
ETH:	Atheros AR8327N Gigabit Switch (4 x LAN, 1 x WAN)
USB:	2 x 3.0 (Renesas uPD720202K8-711-BAA-A, firmware not included)
SATA:	1 x SATA-II 3.5" Hard Drive Bay for HDDs (DesignWare SATA).
WLAN1:	Atheros AR9380 5GHz 802.11an 3:3x3
WLAN2:	Atheros AR9581 2.4GHz 802.11bgn 3:3x3
SDCARD:	GL827L SD/MMC/MS Flash Card Reader (on internal dwc2 USB 2.0 host)
I2C:	GMT G781 (i2c-0 @ 0x4d - lm90 compatible temperature sensor)
	TC654    (i2c-0 @ 0x1b - Dual PWM fan Speed controller)

WARNING: The serial port needs a TTL/RS-232 v3.3 level converter!

INFO: Since this device only has a NAND chip. I opted for going with
root.squashfs in a UBI volume. There's no squashfs/jffs2 image.

This target produces three images.
  a. netgear factory image
     This image can be used to flash the Netgear WNDR4700 via the
     firmware recovery mechanism and the web admin site.

     The bootloader can be instructed to do a firmware recovery via the
     # fw_recovery
     command. It will start a tftp server and listen on 192.168.1.1
     (the ipaddr variable in u-boot) for incoming, binary tftp clients.
     The firmware recovery mechanism is also started if any of the flash
     content which contains the kernel, device-tree definitions or the
     (fake)rootfs fails to verify or load.

  b. sysupgrade.tar image for sysupgrade
     An sysupgrade will replace the entire current LEDE installation
     with a newer version. This does include the kernel and the ubi rootfs
     partition. The configuration can be carried over automatically as well
     if desired.

     simply copy the sysupgrade.tar to a the WNDR4700 running LEDE and run:

     root@lede:~# sysupgrade sysupgrade.tar

     and let it reboot.

     Note: The devicetree flash area is NOT updated. Until the devicetree
	   definition is stable, this can lead to all sorts of hardware
	   detection problems! So make sure, if you experience issues: try
	   the fw_recovery. If you are unsure whenever this affects you:
	   test if you can reproduce your issue with the initramfs method.
	   As it will always have up-to-date device-tree definitions.

  c. initramfs image for TFTP (for development and testing)
     To use the initramfs method, follow the following steps:
       1) Move the "lede-apm821xx-netgear-WNDR4700-initramfs-kernel.bin"
	  file to to the root directory of your TFTP server.

       2) rename it to wndr4700.bin

       3) On the WNDR4700 - Hit Enter during u-boot and insert:
	  # tftp 400000 wndr4700.bin; run addtty; bootm 400000 -

     This will boot the LEDE image.

     Note: The default tftp server is 192.168.1.7, if you want to change it:
     # setenv serverip 192.168.8.7;

     Note2: The default address for the WNDR4700 is 192.168.1.1:
     # setenv ipaddr 192.168.8.8;

     Note: Connect you tftp server on the last LAN port (not the WAN)

Note: The firmware for the USB 3.0 Host chip is not included anymore.
Therefore the two USB 3.0 ports will not work without the
uPD7070x-firmware package installed.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2016-07-22 09:48:12 +02:00
Christian Lamparter 47eeb9f857 apm821xx: lm90 add thermal sensor interface support for device tree
From 912-hwmon-lm90-expose-to-thermal-fw-via-DT.patch:
"This patch adds to lm90 temperature sensor the possibility
to expose itself as thermal zone device, registered on the
thermal framework.

The thermal zone is built only if a device tree node
describing a thermal zone for this sensor is present
inside the lm90 DT node. Otherwise, the driver behavior
will be the same."

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2016-07-22 09:48:12 +02:00
Christian Lamparter b46e2a6d95 apm821xx: tc654: add driver for Microchip TC654/TC655 PWM fan controllers
This patch adds a hwmon driver for the Microchip TC654 and TC655
Dual SMBus PWM Fan Speed Controllers with Fan Fault detection.

The chip is described in the DS2001734C Spec Document from Microchip.
It supports:
	- Shared PWM Fan Drive for two fans
	- Provides RPM
	- automatic PWM controller (needs additional
	  NTC/PTC Thermistors.)
	- Overtemperature alarm (when using NTC/PTC
	  Thermistors)

The TC654 is used by the Netgear WNDR47X0 to control its
system fan.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2016-07-22 09:48:12 +02:00
Christian Lamparter dc7efaefb5 apm821xx: add support for the Western Digital MyBook Live Series
Hardware Highlights:

This patch adds support for Western Digital MyBook Live Series:
CPU: AMCC PowerPC  UNKNOWN (PVR=12c41c83) at 800 MHz (PLB=200, OPB=100, EBC=100 MHz)
     32 kB I-Cache 32 kB D-Cache, 256 kB L2-Cache, 32 kB OnChip Memory
Board: Apollo-3G - APM82181 Board, 1*SATA
DRAM:  256 MB (2x NT5TU64M16GG-AC)
FLASH: 512 kB (SST 39VF040)
Ethernet: 1xRGMII - 1 Gbit - Broadcom PHY BCM54610

WARNING: The serial port needs a TTL/RS-232 v3.3 level converter!

The MyBook Live Duo additionally features a 1x USB 2.0 host port
and can support a second hard-drive.

This target produces two images for a target.
 1. ext4 image
    The extracted/raw image can be directly installed on
    the internal HDD via "dd if=img.ext4 of=/dev/sdX".

    This can either be done in place with the stock MyBook Live
    firmware via ssh. Or by removing the HDD and writing the image
    with a different PC.

    The the compressed images are useful for sysupgrade.

 2. recovery.tar image for TFTP and Serial.

    extract the recovery.tar to a TFTP server directory.

    On the MyBook Live (Duo) serial port - Hit Enter during u-boot and insert:
    # setenv serverip 192.168.1.254; setenv ipaddr 192.168.1.1; run net_self

    Where 192.168.1.254 is your TFTP server.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2016-07-22 09:48:12 +02:00
Christian Lamparter d37d16488c apm821xx: sata_dwc_460ex: backport fixes and cleanups from 4.7
This patch fixes the sata_dwc_460ex SATA driver which is used
by the SATA controllers in the MyBook Live Series and WNDR4700.

The code was backported from the upstream kernel.
It can be dropped completely on 4.7+.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2016-07-22 09:48:12 +02:00
Christian Lamparter ea91ee13a7 apm821xx: dw_dmac: backport fixes and cleanups from 4.7
This patch fixes the dw_dmac dma engine which is used
by the SATA controllers in the MyBook Live Series and WNDR4700.

The code was backported from the upstream kernel.
It can be dropped completely on 4.7+.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2016-07-22 09:48:12 +02:00
Chris Blake a57d6e2d47 apm821xx: add support for the Cisco Meraki MR24
This patch adds support for the Cisco Meraki MR24 Access point
to the apm821xx target.

Board:		MR24 - Meraki MR24 Cloud Managed Access Point
CPU:		APM82181 SoC 800 MHz (PLB=200 OPB=100 EBC=100)
Flash size:	32MiB
RAM Size:	128MiB
Wireless:	Atheros AR9380 5.0GHz + Atheros AR9380 2.4GHz
Ethernet ports:	1x Gigabit Atheros AR8035

WARNING: The serial port needs a TTL/RS-232 v3.3 level converter!

For flashing instructions, visit:
<https://github.com/riptidewave93/Openwrt-MR24/blob/master/README.md#flashing>

Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
2016-07-22 09:48:12 +02:00
Chris Blake 3827ce2c3d apm821xx: add support for the apm821xx device target
This adds a new target for PowerPC APM82181 and APM82161
(464-based) boards, as well as adds support for the booke-wdt
watchdog package.

Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
2016-07-22 09:48:12 +02:00
Christian Lamparter 39f3408732 ppc4xx: remove booke-wdt watchdog package
This patch gets rid of the booke watchdog kmod package.
Instead the affected boards will enable it in their
kernel configs.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2016-07-22 09:48:12 +02:00
Mathias Kresin e6a7e6ed25 lantiq: fix image creation of P2812HNUF3 & BTHOMEHUBV3A
Both devices were converted to the new image build code but still using
the LegacyDevice define. Therefore an image isn't created for the
mentioned devices.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-07-22 09:46:44 +02:00
Felix Fietkau d22fc1973c kernel: enable CONFIG_SND_PROC_FS by default (FS#54)
Some user space code relies on it

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-21 15:33:50 +02:00
Felix Fietkau c6c81351b7 ar71xx: add missing profile for the nand subtarget (FS#56)
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-21 13:58:47 +02:00
Felix Fietkau 16209710d9 ar71xx: fix WNDR4300v1 / WNDR3700v4 build (FS#56)
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-21 13:52:12 +02:00
Felix Fietkau ad323881df ar71xx: fix more image build code whitespace/tab issues
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-21 13:49:01 +02:00
Felix Fietkau 3d8c8d5e05 ar71xx: fix tab vs whitespace issue in image building code
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-21 13:29:04 +02:00
Felix Fietkau 4d0f4f5e52 ar71xx: remove obsolete MultiProfile template code
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-21 13:29:04 +02:00
Felix Fietkau 32727c409e mvebu: switch to the new image build code
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-21 13:29:04 +02:00
Rafał Miłecki 60d2620253 kernel: update bcma backporting changes up to 4.8
This allows building bcm47xxsflash on ARM.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2016-07-20 13:42:42 +02:00
Rafał Miłecki d12e276cb0 kernel: backport patch for MTD_BCM47XXSFLASH dependency
This is required to update bcma without build breakage. One of bcma
patches changes BCMA_SFLASH dependency.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2016-07-20 13:00:14 +02:00
Felix Fietkau 7a175e2d44 ipq806x: clean up redundant initialization of core device image variables
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-20 10:13:50 +02:00
Felix Fietkau cd243b1090 cns3xxx: remove obsolete jffs2 image build code
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-20 10:13:50 +02:00
Felix Fietkau eceb6b924a x86: remove obsolete reference to $(PROFILE)
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-20 10:13:50 +02:00
Felix Fietkau 2b4d21a3e6 mxs: unconditionally install kernel images/dtb files into rootfs (needed by boards)
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-20 10:13:50 +02:00
Felix Fietkau 650afe412b kirkwood: remove obsolete code for including kernel/dtb in rootfs
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-20 10:13:50 +02:00
Felix Fietkau edea59fd99 omap: remove obsolete code for including kernel/dtb in rootfs
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-20 10:13:50 +02:00
Felix Fietkau 1625e57772 omap: remove obsolete kernel version support
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-20 10:13:50 +02:00
Felix Fietkau 0538bbdc4d kirkwood: remove obsolete ubinize.cfg file
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-20 10:13:50 +02:00
Felix Fietkau 5d4b044955 kirkwood: clean up redundant variables in the image building code
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-20 10:13:50 +02:00
Felix Fietkau cfd1ef4b90 kirkwood: get rid of useless ubifs/ubi option variables
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-20 10:13:50 +02:00
Felix Fietkau ab92f57684 lantiq: convert remaining xway NAND devices to new image build code
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-20 10:13:50 +02:00
Felix Fietkau f12e964733 lantiq: convert AVM xrx200 devices to new image build code
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-20 10:13:50 +02:00
Felix Fietkau bdfed2a2c3 lantiq: convert simple xrx200 devices to new image build code
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-20 10:13:50 +02:00
Felix Fietkau 22c0206044 lantiq: add image build template for NAND devices
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-20 10:13:50 +02:00
Felix Fietkau 8058e4778b lantiq: simplify image building code
Specifying the device profile in PROFILES is unnecessary, and for all
devices the DEVICE_PROFILE variable matched the device name.
Get rid of this useless variable and set DEVICE_DTS to $(1)

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-20 10:13:50 +02:00
Felix Fietkau cc88df1a38 lantiq: fix building NAND images in default config
Remove remaining references to $(PROFILE)

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-20 10:13:50 +02:00
Felix Fietkau ceee47ba64 lantiq: disable jffs2 support on xrx200
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-20 10:13:50 +02:00
Felix Fietkau 5a92e049d5 kernel: remove obsolete patch adding usb_find_device_by_name
ledtrig-usbdev does not need it anymore

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-20 10:13:50 +02:00
Rafał Miłecki 5ea8756766 ledtrig-usbdev: use upstream function for iterating USB devices
This will allow us to drop LEDE patch adding usb_find_device_by_name.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2016-07-20 10:13:50 +02:00
Jo-Philipp Wich e633a1b48f ar71xx: fix default network config of WZR-HP-G300NH and CR3000
The network defaults for the WZR-HP-G300NH and CR3000 models wrongly set the
lan interface to a vlan tagged device while the switch was set up in untagged
mode, leading to broken lan side ethernet connectivity by default.

Fix the issue by emitting untagged interfaces, consistent with the switch
setting on the device.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-07-20 00:21:48 +02:00
Zhao Gang d963ddf042 ar71xx: add support for gl-ar300m
This add initial support for gl-ar300m router.
Product page: http://www.gl-inet.com/ar300m/

Signed-off-by: Zhao Gang <gang.zhao.42@gmail.com>
2016-07-20 00:21:48 +02:00
Florian Klink 4221288db7 x86/generic: enable CONFIG_SATA_VIA
This enables support for VIA SATA.
2016-07-19 14:26:32 +02:00
Daniel Golle 022698c6c9 kernel: backport cosmetic UBIFS patches to kernel 4.1
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2016-07-19 00:31:34 +02:00
Daniel Golle fc90851df0 kernel: backport yet another cosmetic ubifs patch
On UBI-enabled devices using squashfs as their rootfs an error
message like
UBIFS error (ubi0:3 pid 1): init_constants_early: too few LEBs (12), min. is 17
was thrown while probe-mounting the rootfs which later on succeeds and
thus shouldn't alert the user.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2016-07-19 00:31:27 +02:00
Daniel Golle f082d94235 oxnas: add kmod-ledtrig-timer to default package set
It is needed for preinit/failsafe indications to work.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2016-07-18 20:05:15 +02:00
Daniel Golle 8880497382 oxnas: use DHCP by default on ethernet interface (lan)
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2016-07-18 19:37:43 +02:00
Daniel Golle b05125c775 oxnas: sync kernel config-4.1 with changes made to config-4.4
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2016-07-18 18:59:53 +02:00