hak5
/
openwrt
mirror of https://github.com/hak5/openwrt.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
20,249 Commits
5 Branches
29 Tags
202 MiB
Commit Graph

8049 Commits (16459281356e9f8f7ec5d6b7bb7ef3ade8910483)

Author SHA1 Message Date
Gabor Juhos 8b567fb508 generic: add driver for the RTL8367R/M switches 
SVN-Revision: 29678
 2012-01-07 19:36:31 +00:00
Gabor Juhos 87fb92ee03 generic: rtl8366: preparing for RTL8367 support 
* make clock delay configurable
* make read,write commands configurable
* use u16 for member and untag fields

SVN-Revision: 29677
 2012-01-07 19:36:30 +00:00
Gabor Juhos 43196813d7 generic: rtl8366_smi: add timeout message 
SVN-Revision: 29676
 2012-01-07 19:36:25 +00:00
Gabor Juhos 67b2814842 ar71xx: local mac support on the wndr3700 
The wndr3700 at least has no eth0 mac address and usually leverages
the first wireless device's mac when in a bridged scenario. If,
however, you want to route, and not bridge the interfaces, you
need a unique mac address for it.

This patch sets the local bit on the mac address pulled from the
wireless chip and uses the resulting address for eth0.

Patch-by: Dave Taht <dave.taht@gmail.com>

SVN-Revision: 29675
 2012-01-07 17:24:44 +00:00
Gabor Juhos 6c74274c8d generic: improve MIPS kexec support 
It is based on patches from the linux-longsoon-community git tree:
http://dev.lemote.com/cgit/linux-loongson-community.git/

Now the kernel can use the command line parameter from kexec-tools.

Runtime tested on ar71xx with 2.6.39.4 (the wathdog must be stopped
before executing the new kernel). Compile tested with lantiq (3.1.4)
and brcm47xx (3.0.12).

SVN-Revision: 29674
 2012-01-07 16:29:16 +00:00
Gabor Juhos f638c6207b ar71xx: fix sysupgrade on the TL-WR841N/ND v7 boards 
SVN-Revision: 29672
 2012-01-06 15:54:59 +00:00
Gabor Juhos 1e848b17ad ar71xx: add support for Redwave RW2458N 
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 29669
 2012-01-06 07:20:59 +00:00
Gabor Juhos 84cd8a5ee0 ar71xx: fix RB-750 network configuration 
SVN-Revision: 29668
 2012-01-06 07:20:54 +00:00
Gabor Juhos 8eb0b7ab3d ar71xx: fix sections mismatch warnings in the nand drivers 
SVN-Revision: 29667
 2012-01-05 18:08:33 +00:00
Gabor Juhos 232eb83f74 ar71xx: fix LED configuration on the RB-750 
SVN-Revision: 29666
 2012-01-05 18:08:28 +00:00
Gabor Juhos d65c6fe720 ar71xx: create profile and build image for the ALFA AP96 board 
SVN-Revision: 29663
 2012-01-04 21:13:57 +00:00
Gabor Juhos b8f0d86115 ar71xx: add inital support for the ALFA Network AP96 board 
The microSD slot and the Real Time Clock is not working yet.
The miniPCIe interface is not tested due to the lack of a
suitable card.

SVN-Revision: 29662
 2012-01-04 21:13:54 +00:00
Gabor Juhos 807e046193 ar71xx: specify console kernel parameter for the Compex boards 
SVN-Revision: 29660
 2012-01-04 17:30:59 +00:00
Gabor Juhos 923f3e3752 ar71xx: allow to use the command line hack on compex devices 
SVN-Revision: 29659
 2012-01-04 17:30:58 +00:00
Gabor Juhos 2f53f82203 ar71xx: use the TL-MR3x20 code for the TL-WR841N/ND v7 
These models are based on the AP99 reference board,
and uses the AR7241 SoC.

SVN-Revision: 29658
 2012-01-04 17:30:57 +00:00
Gabor Juhos 301b1b4f92 ar71xx: show correct model name on TL-WA701N/ND boards 
SVN-Revision: 29657
 2012-01-04 17:30:55 +00:00
Gabor Juhos ac68f0d8fa ar71xx: add profile and build image for the TL-WA701N/ND boards 
SVN-Revision: 29656
 2012-01-04 17:30:54 +00:00
Gabor Juhos 72019009c7 ar71xx: fix network configuration for the TL-WA901N/ND boards 
SVN-Revision: 29654
 2012-01-04 17:30:52 +00:00
Gabor Juhos 90bfef9ec9 ar71xx: allow to use LAN LED on the TL-WA901N/ND boards 
SVN-Revision: 29653
 2012-01-04 17:30:50 +00:00
Gabor Juhos 5eb502d9c1 ar71xx: add default LED configuration for the TL-MR3020 
Also use the system LED for diagnostic.

SVN-Revision: 29652
 2012-01-04 17:30:49 +00:00
Gabor Juhos 1045c83527 ar71xx: add support for TP-Link TL-MR3020 
This patch adds support for the TP-Link device TL-MR3020 which is very
similiar to the TL-WR703N.
The TL-MR3020 uses 5 LEDs, 1 push button and a switch with 3 positions.
Only four LEDs can be controlled via GPIO. The power LED is connected to
the power supply.
The WPS push button has been mapped to KEY_WPS_BUTTON. The two GPIO signals
of the sliding switch have been mapped to BTN_0 and BTN_1.

I have also setup a wiki page with details here:
http://wiki.openwrt.org/toh/tp-link/tl-mr3020

USB is working and has been tested with USB mass storage and USB UMTS
stick.

Wifi also seems to work.

Ethernet is working too.

Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de>

SVN-Revision: 29651
 2012-01-04 17:30:47 +00:00
Gabor Juhos 88223f87d1 ar71xx: use the new om-watchdog package for OM2P 
Signed-off-by: Antonio Quartulli <ordex@autistici.org>

SVN-Revision: 29648
 2012-01-04 17:30:41 +00:00
Jo-Philipp Wich a788f199c9 remove current RTSP support 
SVN-Revision: 29643
 2012-01-04 00:29:29 +00:00
Jo-Philipp Wich 237282ae8c backport upstream commit e1738bd9cecc5c867b0e2996470c1ff20f66ba79 to affected kernels (#9802) commit 8efa88540635 (sch_sfq: avoid giving spurious NET_XMIT_CN signals) forgot to call qdisc_tree_decrease_qlen() to signal upper levels that a packet (from another flow) was dropped, leading to various problems. 
SVN-Revision: 29642
 2012-01-03 23:08:15 +00:00
Gabor Juhos 8854c90119 ar71xx: add profile and build factory image for the Hornet-UB board 
SVN-Revision: 29637
 2012-01-01 19:30:29 +00:00
Gabor Juhos 1d3de89f3c ar71xx: build images for the ALFA Network N2/N5 boards 
SVN-Revision: 29636
 2012-01-01 19:30:28 +00:00
Gabor Juhos 1e68f10b87 ar71xx: add support for the ALFA Network N2/N5 boards 
SVN-Revision: 29635
 2012-01-01 19:30:25 +00:00
Gabor Juhos 5c067db8a7 ar71xx: define LAN/WAN LEDs for the TL-WR741N/ND boards 
SVN-Revision: 29631
 2011-12-31 15:02:46 +00:00
Gabor Juhos fff02e6ea8 ar71xx: enable SWCONFIG_LEDS 
SVN-Revision: 29630
 2011-12-31 15:02:40 +00:00
Gabor Juhos 5fa65cba6e kernel: swconfig: introduce a generic switch LED trigger 
SVN-Revision: 29627
 2011-12-31 15:02:30 +00:00
Gabor Juhos 8c2482f76e ar71xx: ag71xx: implement get_port_{link,stats} callbacks 
SVN-Revision: 29626
 2011-12-31 15:02:26 +00:00
Gabor Juhos 975355a2b1 kernel: swconfig: add get_port_{link,stats} callbacks 
SVN-Revision: 29625
 2011-12-31 15:02:24 +00:00
Gabor Juhos 557009bbdb ar71xx: fix LEDs on the WRT400N 
SVN-Revision: 29624
 2011-12-31 13:54:11 +00:00
Gabor Juhos 244c322d25 ramips: rt288x: add support for the Belkin F5D8235-4 v1 board 
Patch-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 29617
 2011-12-28 08:43:43 +00:00
Gabor Juhos f50b02b559 ramips: rt288x: change base address and window size of flash bank 0 
SVN-Revision: 29616
 2011-12-28 08:43:36 +00:00
Gabor Juhos 98437278c4 ramips: rt305x: add support for the ALFA Networks W502U (R36) board 
SVN-Revision: 29615
 2011-12-28 08:43:32 +00:00
Gabor Juhos 76dacee995 ar71xx: enable sysupgrade support for airrouter 
Works for me! ;-)

Patch-by: Russell Senior <russell@personaltelco.net>

SVN-Revision: 29614
 2011-12-27 16:59:43 +00:00
Gabor Juhos c6ee919b2a ar71xx: fix sysupgrade on PB42/PB44 boards 
SVN-Revision: 29613
 2011-12-27 16:57:01 +00:00
Gabor Juhos 723d8dd74f ramips: rt288x: add support for the Buffalo WLI-TX4-AG300N board 
SVN-Revision: 29612
 2011-12-27 16:56:30 +00:00
Jo-Philipp Wich 9fa33ceee2 add missing config symbol 
SVN-Revision: 29610
 2011-12-25 13:33:18 +00:00
Hauke Mehrtens 11125d68ed brcm47xx: fix usb on more recent bcma based devices. 
SVN-Revision: 29605
 2011-12-23 17:21:52 +00:00
Gabor Juhos 7b1e525b56 ramips: initial support for Sitecom WL-351 v1 002 
This add support for the Sitecom WL-351 v1 002.
In principle the Engenius ESR9850 should also work with this, but I
don't have the hardware to test it.

Since an external gigabit switch (RTL8366RB) is used,
I had to modify the ramips_esw driver to add a 'bypass' mode, which
just configures it to not filter the vlan tags.
Also two initialization words (FCT2 and FPA2) are set to different
values by u-boot than what the driver is using and it only seems to
work correctly when they not overridden by the driver, so I
added them to the platform specific data as reg_initval_fct2 and
reg_initval_fpa2.

With this wired lan works as expected, however I'm still having some
trouble with the wireless lan:
It only works after I rmmod & re-insmod rt2800pci and then
reconfigure it in the webinterface, but not directly after
rebooting.

The symptom of this is wpad saying:
Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: associated (aid 1)
Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> WPA: pairwise key handshake completed (RSN)
Dec 20 15:45:22 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: authenticated

But wpa_supplicant on the client saying:
Authentication with <wl351mac> timed out.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 29604
 2011-12-23 14:27:16 +00:00
Gabor Juhos 2cb946f5b4 ramips: add support for the Senao/EnGenius ESR-9753 board 
Signed-off-by: Artur Wronowski <arteqw@gmail.com>

SVN-Revision: 29603
 2011-12-23 14:27:10 +00:00
Gabor Juhos 03bce34384 ramips: define firmware partition for Omnima MiniEMBWiFi 
Patch-by: Ivan Ignjatic <ivan@omnima.co.uk>

SVN-Revision: 29602
 2011-12-23 14:27:05 +00:00
Felix Fietkau db0a1db257 ar71xx: set a reserved bit that resets to 1 when writing the address table control register on the ar7240 switch (should fix #10547) 
SVN-Revision: 29598
 2011-12-22 05:43:53 +00:00
Jonas Gorski 8799627ef0 ar71xx: add default network config for buffalo WZR-HP-G300NH2 and WZR-HP-G450H 
Thanks netprince for reporting and testing.

SVN-Revision: 29595
 2011-12-21 19:32:40 +00:00
Jo-Philipp Wich ebefe1eb3a the mach file of the WZR-HP-G300NH2 accidentally claimed the mach id of the WZR-HP-AG300H, correct the id (#10649) 
SVN-Revision: 29593
 2011-12-21 01:27:48 +00:00
Hauke Mehrtens 0cd03df3b1 brcm47xx: remove patch starting adding brcm4716 to ssb 
brcm4716 is supported by bcma now we do not need this patch

SVN-Revision: 29576
 2011-12-19 23:55:20 +00:00
Hauke Mehrtens 5b8686c303 brcm47xx: add new usb driver for bcma bus and replace ssb usb driver. 
This new usb driver uses an extra device so the ehci and the ohci driver are not depending on ech other any more.

SVN-Revision: 29575
 2011-12-19 23:39:13 +00:00
Hauke Mehrtens 1aa5a61754 kernel: update bcma and ssb to version master-2011-12-16 from wireless-testing 
SVN-Revision: 29574
 2011-12-19 23:33:03 +00:00
Hauke Mehrtens 91d0ef6f19 brcm47xx: remove support for kernel 2.6.39 
There are problems with the patches for kernel 2.6.39 and I do not want to support two different sets of patches.

SVN-Revision: 29573
 2011-12-19 23:26:15 +00:00
Felix Fietkau 11013ad947 ar71xx: add missing wireless led changes for wzr-hp-g300nh2 
SVN-Revision: 29568
 2011-12-19 09:04:15 +00:00
Felix Fietkau 0cc056cb7e ar71xx: add support for the wzr-hp-g300nh2 
Signed-off-by: Mark Deneen <mdeneen@gmail.com>

SVN-Revision: 29567
 2011-12-18 22:20:17 +00:00
Gabor Juhos 5a0a2b2f1b ar71xx: use 64kraw template on more TP-Link boards 
SVN-Revision: 29561
 2011-12-17 18:49:55 +00:00
Gabor Juhos 67c7980290 ar71xx: connect GMAC0 to the internal switch on DB120 
Because the external switch has no driver yet, connect GMAC0
to the PHY4 of the internal switch for now. This allows to
use the DB120 board as a router with 4LAN+1WAN ports.

SVN-Revision: 29557
 2011-12-15 22:25:38 +00:00
Gabor Juhos 5bbd416e38 ar71xx: add defines for the AR934X GMAC interface 
SVN-Revision: 29556
 2011-12-15 22:25:36 +00:00
Gabor Juhos e47a8c2bb2 ar71xx: fix GMAC1 interface speed on the DB120 board 
SVN-Revision: 29555
 2011-12-15 22:25:35 +00:00
Gabor Juhos 36bc2c2c80 ar71xx: ag71xx: fix switch port setup for AR934X 
SVN-Revision: 29554
 2011-12-15 22:25:32 +00:00
Gabor Juhos 00667c3846 ar71xx: ag71xx: allow to connect PHY4 to the CPU on AR934X 
SVN-Revision: 29553
 2011-12-15 22:25:30 +00:00
Gabor Juhos 0540970345 ar71xx: ag71xx: setup switch interface mode on AR934X 
SVN-Revision: 29552
 2011-12-15 22:25:29 +00:00
Gabor Juhos 44014110b8 ar71xx: ag71xx: detect the built-in switch of the AR934X SoCs 
SVN-Revision: 29551
 2011-12-15 22:25:28 +00:00
Gabor Juhos e2a546d475 ar71xx: allow to attach the internal switch for AR934x 
SVN-Revision: 29550
 2011-12-15 22:25:22 +00:00
Gabor Juhos 9ae65588d8 ar71xx: introduce ar71xx_switch_data 
SVN-Revision: 29549
 2011-12-15 22:25:11 +00:00
Gabor Juhos bfe747b7d9 ar71xx: build images for TL-WR741N/ND v2 
SVN-Revision: 29548
 2011-12-15 22:03:48 +00:00
Gabor Juhos aefff26624 ar71x: use raw squashfs images for TP-Link boards 
SVN-Revision: 29547
 2011-12-15 22:03:46 +00:00
Gabor Juhos d5bd28ffae ar71xx: create a template for using unpadded squashfs images 
SVN-Revision: 29546
 2011-12-15 22:03:45 +00:00
Gabor Juhos dbc4fa4b5b ar71xx: put squash image right after the kernel on TP-Link boards 
SVN-Revision: 29545
 2011-12-15 22:03:44 +00:00
Gabor Juhos 850be54b72 ar71xx: tplinkpart: allow to detect JFFS2 as well 
SVN-Revision: 29543
 2011-12-15 22:03:40 +00:00
Gabor Juhos b7d7481b07 ar71xx: ag71xx: check PHY IDs before accessing the switch registers 
SVN-Revision: 29541
 2011-12-15 13:25:23 +00:00
Gabor Juhos 0655552860 ar71xx: ag71xx: don't use port 4 of the switch, it is not connected on ar724x 
SVN-Revision: 29540
 2011-12-15 13:25:21 +00:00
Gabor Juhos 204fc6bed5 ar71xx: ag71xx: nuke ar7240sw_init 
SVN-Revision: 29539
 2011-12-15 13:25:20 +00:00
Gabor Juhos d1f7783612 ar71xx: fix mac addresses on jjPlus devices 
SVN-Revision: 29538
 2011-12-15 13:25:18 +00:00
Gabor Juhos d3058b8f8c ar71xx: build image for the Hornet-UB board 
SVN-Revision: 29536
 2011-12-14 20:54:11 +00:00
Gabor Juhos b9c5cb5c9a ar71xx: add support for ALFA Network's Hornet-UB board 
SVN-Revision: 29535
 2011-12-14 20:54:10 +00:00
Gabor Juhos 66c8cc0f6d ar71xx: add GPIO function bit defines for AR933X 
SVN-Revision: 29534
 2011-12-14 20:54:07 +00:00
Gabor Juhos 0c38d36488 ramips: add support for Omnima MiniEMBWiFi board 
This patch adds support for the Omnima MiniEMBWiFi
Ralink RT3050F based board.

Based on a patch by Ivan Ignjatic <ivan at omnima.co.uk>

SVN-Revision: 29533
 2011-12-14 20:51:26 +00:00
Felix Fietkau 7076d74b21 ar71xx: fix gpio count for ar7241/ar7242 
SVN-Revision: 29532
 2011-12-14 20:47:24 +00:00
Felix Fietkau b878f4a927 ar71xx: register extra leds behind the wireless mac on wzr-hp-g450h 
SVN-Revision: 29531
 2011-12-14 20:21:42 +00:00
Felix Fietkau e3017bc05e ath9k: add support for registering extra leds connected to the wmac gpio lines 
SVN-Revision: 29530
 2011-12-14 20:21:36 +00:00
Gabor Juhos d2717d3d47 ar71xx: get rid of squashfs-4k images 
SVN-Revision: 29522
 2011-12-13 20:41:24 +00:00
Gabor Juhos 5afedc67e2 generic: disable 'small sector' erase in m25p80 driver 
This fixes the issues with the jffs2 images on various boards. Using
JFFS2 on devices with 4KiB erase sectors is not safe:
http://lists.infradead.org/pipermail/linux-mtd/2011-June/036591.html

SVN-Revision: 29521
 2011-12-13 20:41:22 +00:00
Felix Fietkau 4a441570ca kernel: move linux/ath9k_platform.h to generic files so that it can be reused from other targets 
SVN-Revision: 29516
 2011-12-13 15:14:59 +00:00
Felix Fietkau 3806671fe5 ar71xx: fix wireless led on wzr-hp-g450h 
SVN-Revision: 29515
 2011-12-13 15:00:43 +00:00
Gabor Juhos 2dd7dfb1c9 ar71xx: enable AR9341 support at setup.c 
Patch-by: dyq <729650915@qq.com>

SVN-Revision: 29514
 2011-12-13 14:59:43 +00:00
Gabor Juhos 058998acdb ar71xx: Build images for Netgear WNDRMAC and WNDRMACv2 
The WNDRMAC is a WNDR3700v2 (64MB RAM, 16MB flash) in a white case. The
WNDRMACv2 is a WNDR3800 (128MB RAM, 16MB flash) in a WNDRMAC case.

The WNDRMAC case doesn't have "holes" or labels for the 2.4GHz LED or
switch ports 2-4. The stock firmware uses a single LED (in the 5GHz
position) to indicate the status of both radios, and a single LED (in the
switch port 1 position) to indicate the status of all LAN ports. The
"missing" LEDs are present on the board, and easily shine through the
case. Unlike the stock firmware, OpenWrt will use these "hidden" LEDs.

I've tested the WNDRMACv2 image. I don't have a v1 WNDRMAC, but assume
that this is sufficient to build a fully-functional image.

Signed-off-by: Mark Mentovai <mark@moxienet.com>

SVN-Revision: 29513
 2011-12-13 14:59:40 +00:00
Felix Fietkau 48f9717371 ar71xx: add gpios and usb for wzr-hp-g450h 
SVN-Revision: 29509
 2011-12-13 13:33:44 +00:00
Gabor Juhos 4ca2d86493 ar71xx: use RedBoot parser on PB44 
SVN-Revision: 29501
 2011-12-11 15:52:47 +00:00
John Crispin 934eef78ca convert to gpiolib 
Signed-off-by:	karlp@tweak.net.au

SVN-Revision: 29486
 2011-12-09 07:52:10 +00:00
Gabor Juhos 6e69765559 ar71xx: fix WNDR3x00 factory image generation 
Factory images for WNDR3700v2 and WNDR3800 should contain these model IDs
for the device: field in their DNI tags, not WNDR3700.

This regressed in r29434, which redid WNDR3x00 model detection. The sixth
parameter to Image/Build/Netgear is only used as the -B argument to
mkdniimg, which is used to set the device: field. In r29434, this was
erroneously changed to be WNDR3700 for all models. The tools to flash
factory images (U-Boot's TFTP server and the factory software's upgrade
utility) may refuse to honor images with incorrect device: fields in their
DNI tags.

Signed-off-by: Mark Mentovai <mark@moxienet.com>

SVN-Revision: 29473
 2011-12-07 06:55:50 +00:00
Gabor Juhos 8eb8a6e1e7 ar71xx: fix WNDR3x00 model detection 
Detect the model name for /tmp/sysinfo/model based on 10 bytes at offset
56 in the art (caldata) mtd partition.

r29434 redid WNDR3x00 model detection, attempting to distinguish between
WNDR3700v2 and WNDR3800 by checking MemTotal in /proc/meminfo. However, it
contained a bug: it put the awk inside a $(...), with the result that all
WNDR3700v2 and WNDR3800 models would be reported as WNDR3800. This patch
checks the model name stored in the art partition, as is done by U-Boot
shipping on the WNDR3800. It has the likely advantage of working with
future models based on the WNDR3700 board. It also will not mis-detect
units on which people install more memory.

I have tested this patch on WNDR3700 (v1), WNDR3700v2, and WNDR3800.

Signed-off-by: Mark Mentovai <mark@moxienet.com>

SVN-Revision: 29472
 2011-12-07 06:55:39 +00:00
Gabor Juhos 43bd4c6ad1 ramips: fix mac addresses on the DIR-300/600 boards 
SVN-Revision: 29471
 2011-12-06 20:06:08 +00:00
Jonas Gorski e33bb9ec66 linux: update 3.1 to 3.1.4 
SVN-Revision: 29470
 2011-12-06 19:50:30 +00:00
Jonas Gorski 6e2ae90f4a linux: update 3.0 to 3.0.12 
SVN-Revision: 29469
 2011-12-06 19:50:25 +00:00
Gabor Juhos c6b2b98812 ar71xx: create firmware image for the TL-WR740N/ND v4 boards 
Based on a patch by Cristian Deluxe <djcristiandeluxe@gmail.com>

SVN-Revision: 29468
 2011-12-06 16:26:44 +00:00
Gabor Juhos fbfad4e9b4 ar71xx: use hw_id, hw_rev and flash_layout with mktplinkfw 
SVN-Revision: 29467
 2011-12-06 16:26:43 +00:00
Gabor Juhos d753e08c79 ar71xx: fix TL-MR3x20 profile names in image/Makefile 
SVN-Revision: 29463
 2011-12-06 13:53:21 +00:00
Gabor Juhos 62d8009cdd ar71xx: cleanup TP-Link profiles 
SVN-Revision: 29461
 2011-12-06 10:29:25 +00:00
Gabor Juhos f7a482d382 ar71xx: add TP-Link board detection 
SVN-Revision: 29459
 2011-12-05 21:11:01 +00:00
Gabor Juhos bdc2eca7de ar71xx: use correct mac on the lan interface on several TP-LINK devices 
SVN-Revision: 29458
 2011-12-05 21:10:58 +00:00
Gabor Juhos 0103069372 ar71xx: allow to pass negative offset values for ar71xx_init_mac 
SVN-Revision: 29457
 2011-12-05 21:10:55 +00:00
Gabor Juhos ada92aee62 ar71xx: don't register PCI controller on AR934x if PCIE_RC bit is not set 
SVN-Revision: 29456
 2011-12-05 18:21:15 +00:00
Gabor Juhos c6bcf8d1d8 ar71xx: verify hardware id of firmware images on TP-Link boards 
SVN-Revision: 29455
 2011-12-05 18:11:51 +00:00
Gabor Juhos 5ef6ec4a31 ramips: set mac addresses for the NBG-419N 
Based on a patch by Nerijus Baliunas <nerijus@users.sourceforge.net>

SVN-Revision: 29454
 2011-12-05 17:27:07 +00:00
Gabor Juhos 750d560767 ramips: set preinit interface mac on the hw550-3g board 
Based on a patch by Daniel Golle <dgolle@allnet.de>

SVN-Revision: 29453
 2011-12-05 17:27:06 +00:00
Gabor Juhos b5d7b359b2 ramips: use ramips_get_mac_* functions in the preinit script 
SVN-Revision: 29452
 2011-12-05 17:27:04 +00:00
Gabor Juhos 4d5b940e66 ramips: move ramips_get_mac_* functions to lib/ramips.sh 
SVN-Revision: 29451
 2011-12-05 17:27:03 +00:00
Gabor Juhos cc853acb3a ramips: add ramips_ prefix to get_mac_{binary,nvram} functions 
SVN-Revision: 29450
 2011-12-05 17:27:02 +00:00
Gabor Juhos b1137d48a4 ramips: fix network configuration setup 
SVN-Revision: 29448
 2011-12-05 16:54:48 +00:00
Gabor Juhos 4dc9092f4b ar71xx: reclaim some unused space on TP-Link boards 
With the default OpenWrt configuration, this increases the size
of the rootfs_data partition by 384KB/128KB on the older/newer
TP-Link models.

SVN-Revision: 29447
 2011-12-05 14:52:36 +00:00
Gabor Juhos 3e7a6d182a ar71xx: check squashfs signature in TP-Link mtd parser 
SVN-Revision: 29446
 2011-12-05 14:52:33 +00:00
Gabor Juhos feebf484ba ar71xx: use the lzma-loader on TP-Link boards w/o lzma support 
SVN-Revision: 29444
 2011-12-05 14:52:28 +00:00
Gabor Juhos d42968351f ar71xx: add lzma loader 
SVN-Revision: 29443
 2011-12-05 14:52:25 +00:00
Felix Fietkau 1f809532de ar71xx: add preliminary support for wzr-hp-g450h 
SVN-Revision: 29441
 2011-12-05 14:20:51 +00:00
Felix Fietkau d1f63f8538 ar71xx: move multi-m25p80 concat code from wzr-hp-ag300h mach code to dev-m25p80.c, other buffalo routers use it as well 
SVN-Revision: 29440
 2011-12-05 14:20:44 +00:00
Gabor Juhos 4cc2b9bb06 ar71xx: rewrite WNDR3700/3800 handling 
SVN-Revision: 29434
 2011-12-05 13:03:54 +00:00
Jo-Philipp Wich 78699c2e51 add some missing wndr3800 base-files definitions 
SVN-Revision: 29433
 2011-12-05 12:56:21 +00:00
Gabor Juhos 5177814ade ar71xx: change user-space board detection 
SVN-Revision: 29432
 2011-12-05 12:56:20 +00:00
Gabor Juhos 8a3a60fc64 ar71xx: allow WNDR3700 image creation to fail if kernel/rootfs too big 
SVN-Revision: 29431
 2011-12-05 12:47:53 +00:00
Gabor Juhos 56c9b50006 ramips: fix argus board rootfs size 
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 29422
 2011-12-04 15:24:57 +00:00
Gabor Juhos 7cfa39f032 ar71xx: use the tp-link parser on the tp-link boards 
Also remove static partition maps.

SVN-Revision: 29416
 2011-12-03 18:13:31 +00:00
Gabor Juhos 514b1167c9 ar71xx: add mtd partition parser for the TP-Link boards 
SVN-Revision: 29415
 2011-12-03 18:13:27 +00:00
Gabor Juhos fc7fb29bae ar71xx: run the RedBoot parser only on the RedBoot based boards 
SVN-Revision: 29414
 2011-12-03 18:13:25 +00:00
Gabor Juhos 9cc28d5aa0 ar71xx: run the MyLoader parser only on the WP543 board 
SVN-Revision: 29413
 2011-12-03 18:13:23 +00:00
Gabor Juhos 67a0b9aada ar71xx: run the wrt160nl parser only on the WRT160NL board 
Also remove static mtd partition definitions.

SVN-Revision: 29412
 2011-12-03 18:13:20 +00:00
Gabor Juhos c8acd6e013 ar71xx: allow to pass part_probe types to the m25p80 driver 
SVN-Revision: 29411
 2011-12-03 18:13:18 +00:00
Gabor Juhos 20483faed0 ar71xx: create initramfs images for the newer TP-Link boards 
SVN-Revision: 29410
 2011-12-03 16:57:23 +00:00
Gabor Juhos 9a2005e5e6 ar71xx: remove swconfig and wpad-mini from custom profiles 
SVN-Revision: 29408
 2011-12-03 16:33:41 +00:00
Gabor Juhos bc1d818610 ar71xx: add uboot-envtools to the default package list 
SVN-Revision: 29407
 2011-12-03 16:33:40 +00:00
Gabor Juhos a02a9c3f8b ar71xx: reclaim unused space in WNDR3700/3800 images 
Patch by: Mark Mentovai <mark@moxienet.com>

SVN-Revision: 29406
 2011-12-03 16:33:38 +00:00
Gabor Juhos ac82296c53 ar71xx: add a profile and build image for the OM2P board 
[juhosg: the name of the final image has been changed to
'openwrt-ar71xx-generic-om2p-squashfs-factory.bin']

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

SVN-Revision: 29397
 2011-12-01 22:49:05 +00:00
Gabor Juhos f188f1bad5 ar71xx: add support for Ubiquiti AirRouter 
Signed-off-by: Gergely Barta <gergely.barta@printerfairkft.hu>

SVN-Revision: 29395
 2011-12-01 22:49:02 +00:00
Gabor Juhos 0612667c34 ar71xx: configure default led behavior for the OM2P 
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

SVN-Revision: 29394
 2011-12-01 22:48:59 +00:00
Gabor Juhos 3fccc3b376 ramips: enable sysupgrade on the RT-N15 board 
SVN-Revision: 29393
 2011-12-01 22:48:58 +00:00
Gabor Juhos 4b2d1c3ad3 ramips: wrap long line in platform upgrade script 
SVN-Revision: 29392
 2011-12-01 22:48:57 +00:00
Gabor Juhos d622263588 ramips: add profile for the Asus RT-N15 
This uses previously submitted rtl8366 kernel packages.

[juhosg: The kmod-gpio-dev package has been removed from the package list.]

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 29391
 2011-12-01 22:48:55 +00:00
Gabor Juhos 3a9e02fa41 ramips: setup default network configuration for RT-N15 
Based on a patch by Roman Yeryomin <roman@advem.lv>

SVN-Revision: 29390
 2011-12-01 22:48:54 +00:00
Gabor Juhos fc61c107f0 ramips: rt288x: add swconfig and rtl8366{s,_smi} drivers to the default profile 
It is needed by the RT-N15 board.

SVN-Revision: 29389
 2011-12-01 22:48:53 +00:00
Gabor Juhos 80221fcd2a ramips: remove default network configuration, and generate that from uci-defaults 
SVN-Revision: 29387
 2011-12-01 22:48:51 +00:00
Gabor Juhos 4f6c58adac ramips: use /lib/functions/uci-defaults.sh 
SVN-Revision: 29386
 2011-12-01 22:48:48 +00:00
Gabor Juhos 39348e387f ar71xx: use /lib/functions/uci-defaults.sh 
SVN-Revision: 29385
 2011-12-01 22:48:47 +00:00
Gabor Juhos 569d8de6d6 ramips: simplify uci-defaults/network script 
SVN-Revision: 29383
 2011-12-01 22:48:45 +00:00
Gabor Juhos 66c9a351dd ramips: setup mac and network interfaces from separate functions 
SVN-Revision: 29382
 2011-12-01 22:48:43 +00:00
Gabor Juhos 62d18e9f9a ramips: fix Asus RT-N15 board support 
Fix Asus RT-N15 flash partitions and make an image.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 29381
 2011-12-01 22:48:42 +00:00
Gabor Juhos 2dd79d55c7 ramips: Sparklan wcr-150gn board fixes 
* Fix partition sizes.
 * Add buttons and leds.
 * Register usb.
 * Remove unnecessary stuff from image Makefile
 * Fix rt2x00 eeprom extract.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 29380
 2011-12-01 22:48:41 +00:00
Gabor Juhos 7c678e7511 ramips: fix package name of kmod-input-gpio-buttons 
Based on a patch from Omnima Limited.

SVN-Revision: 29379
 2011-12-01 22:48:39 +00:00
Gabor Juhos 2ed38b24a8 ramips: move kmod-rt2800-pci to DEFAULT_PACKAGES 
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 29378
 2011-12-01 22:48:38 +00:00
Gabor Juhos 295e04084c ramips: setup bc2 mac addresses from the generic network script 
SVN-Revision: 29377
 2011-12-01 22:48:37 +00:00
Gabor Juhos 02f95d4fb3 ramips: combine network setup for all boards in one file 
Inspired by the patch from Roman Yeryomin. Thanks, Roman!
This removes unnecessary duplication and simplifies network setup for new
boards. It would be a one line change most likely.

[juhosg: setup lan and wan interfaces for unspecified rt3x0x based boards
in order to avoid regression]

Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>

SVN-Revision: 29376
 2011-12-01 22:48:35 +00:00
John Crispin 88cb7ae104 omap24xx: bump to 3.1.3 
SVN-Revision: 29349
 2011-11-28 12:46:18 +00:00
John Crispin bf7316424c lantiq: bump to 3.1.3 
SVN-Revision: 29348
 2011-11-28 10:22:58 +00:00
Nicolas Thill 5e83009a52 targets: fix CONFIG_USB_STORAGE_* inconsistency 
* all options were switched from bool to tristate in 2.6.30
 * add/change/move them to generic, disabled by default
 * remove extinct CONFIG_USB_STORAGE_DPCM dropped in 2.6.29, merged with CONFIG_USB_STORAGE_SDDR09
 * remove extinct CONFIG_USB_STORAGE_SIERRA option in 2.6
 * cleanup ordering

SVN-Revision: 29337
 2011-11-25 20:47:44 +00:00
Gabor Juhos f20797306a ar71xx: modify phy mask of the WP543 board 
This fixes ethernet on newer boards. Based on a patch from #9702.

SVN-Revision: 29328
 2011-11-24 20:09:43 +00:00
Gabor Juhos c20d7378e5 ar71xx: fix wndr3800 machine name 
This fixes the machine name in /proc/cpuinfo and luci status page machine name.

Signed-off-by: Petri Rosenström <petri.rosenstrom@gmail.com>

SVN-Revision: 29326
 2011-11-24 20:09:38 +00:00
Gabor Juhos 600b6efc41 ar71xx: copy atheros initramfs images to the image directory 
SVN-Revision: 29325
 2011-11-24 20:09:35 +00:00
Gabor Juhos d97cf76790 ar71xx: specify mtd layout in command line for the DB120 board 
SVN-Revision: 29324
 2011-11-24 20:09:32 +00:00
John Crispin 9389593db9 lantiq: drop 009-MIPS-make-oprofile-use-cp0_perfcount_irq-if-it-is-se.patch 
This patch is/was a duplicate of generic/patches-3.1/307-mips_oprofile_fix.patch

SVN-Revision: 29294
 2011-11-23 12:22:15 +00:00
John Crispin 4982ca983c lantiq: * fixes ath5k eeprom handling * fixes sx76x * adds sx76x to userland api * minor style cleanups 
Signed-of-by: Andrej Vlašić <andrej.vlasic0@gmail.com>

SVN-Revision: 29292
 2011-11-22 18:50:51 +00:00
Florian Fainelli 718907b661 don't package gpioctl by default 
SVN-Revision: 29288
 2011-11-21 16:36:39 +00:00
Nicolas Thill c33f21ae95 target/uml: export atomic64_* functions on 32-bit x86 
SVN-Revision: 29287
 2011-11-21 14:28:33 +00:00
Gabor Juhos 9990523a0f ar71xx: set GE0 phy_mask for AR933x 
SVN-Revision: 29274
 2011-11-20 11:30:10 +00:00
Jo-Philipp Wich b5739aabd9 fix D-Link DSL-2650U image generation 
SVN-Revision: 29266
 2011-11-19 21:34:51 +00:00
Jonas Gorski 8bac0df4ae linux: update 3.0 to 3.0.9 
SVN-Revision: 29264
 2011-11-19 18:39:12 +00:00
Florian Fainelli ae90aa4efd build images for D-Link DSL-2650U (#9003) 
SVN-Revision: 29238
 2011-11-18 10:37:03 +00:00
Michael Büsch 0b86c2648a omap24xx: Fix cbus nested IRQ acking 
SVN-Revision: 29237
 2011-11-17 22:31:27 +00:00
Michael Büsch df2810831c omap24xx: Fix initialization of software IRQ mask 
SVN-Revision: 29236
 2011-11-17 21:02:00 +00:00
Michael Büsch 3f92f7dd90 omap24xx: Update 3.1 config 
SVN-Revision: 29234
 2011-11-17 19:35:57 +00:00
Michael Büsch 4793be2df9 omap24xx: Some retu/tahvo IRQ fixes 
SVN-Revision: 29233
 2011-11-17 18:06:19 +00:00
Michael Büsch 630bafc5dd omap24xx: Add basic kexec fixes. 
SVN-Revision: 29232
 2011-11-17 14:57:34 +00:00
Michael Büsch 06c986984e omap24xx: Add workaround for omapfb locking bug. 
SVN-Revision: 29201
 2011-11-16 22:34:38 +00:00
Michael Büsch 0f03e17bd0 Revert r29193 
SVN-Revision: 29195
 2011-11-16 19:03:23 +00:00
Michael Büsch 93f02b1ba0 omap24xx: Set platform specific optimization flags 
SVN-Revision: 29194
 2011-11-16 19:02:12 +00:00
Michael Büsch b058e97af4 n810: Add xmodmap to profile 
SVN-Revision: 29193
 2011-11-16 19:01:19 +00:00
Florian Fainelli 8d66465b08 include bridge and 8021q modules by default 
SVN-Revision: 29164
 2011-11-15 22:24:22 +00:00
John Crispin bbe96f13a6 lantiq: add runtime generation of /etc/config/network 
SVN-Revision: 29161
 2011-11-15 18:21:00 +00:00
John Crispin 79a4642b40 lantiq: fix falcon build breakage 
dev-wifi-rt2x00 fails to build on falcon due to missing pci

SVN-Revision: 29129
 2011-11-14 18:55:58 +00:00
Gabor Juhos f27548448b ar71xx: fix USB LED on the DB120 board 
SVN-Revision: 29126
 2011-11-14 17:43:15 +00:00
Gabor Juhos 6ebbb1329d ar71xx: add a function for selecting output signal on a given GPIO pin 
SVN-Revision: 29125
 2011-11-14 17:43:14 +00:00
Gabor Juhos 0c1d3617d7 ar71xx: fix GPIO function handling on AR934x 
SVN-Revision: 29124
 2011-11-14 17:43:13 +00:00
Gabor Juhos aa0c8c4885 ar71xx: add AR71XX_ prefix to GPIO_REG_* defines 
SVN-Revision: 29123
 2011-11-14 17:43:11 +00:00
Gabor Juhos 62a7795afd ar71xx: merge nand scan patch 
SVN-Revision: 29122
 2011-11-14 17:43:10 +00:00
Gabor Juhos 12dae96097 ar71xx: fix a compiler warning 
SVN-Revision: 29110
 2011-11-14 13:07:47 +00:00
Gabor Juhos 5ae0fd802c ar71xx: fix GPIO count for AR934x 
SVN-Revision: 29109
 2011-11-14 13:07:45 +00:00
Gabor Juhos e52269364a ar71xx: flush DDR writeback buffers for WMAC and PCIe on AR934X 
SVN-Revision: 29108
 2011-11-14 11:49:53 +00:00
Gabor Juhos 3104d70552 ar71xx: use a dummy irq chip for WMAC and PCIe irq hadling 
SVN-Revision: 29107
 2011-11-14 11:49:51 +00:00
Gabor Juhos 42e8ae09b5 ar71xx: add AR934X_RESET_REG_PCIE_WMAC_INT_STATUS defines 
SVN-Revision: 29106
 2011-11-14 11:49:49 +00:00
Gabor Juhos c15caea360 ar71xx: add an irq parameter for ar724x_pcibios_init 
SVN-Revision: 29105
 2011-11-14 11:49:47 +00:00
Gabor Juhos cf90b24bb9 ar71xx: remove hardwired interface parameters from mach-* files 
SVN-Revision: 29103
 2011-11-14 07:38:09 +00:00
Gabor Juhos defc79cb40 ar71xx: force hardwired interface parameters in ar71xx_add_device_eth 
SVN-Revision: 29102
 2011-11-14 07:38:07 +00:00
Gabor Juhos 6f4bc1ce37 ar71xx: use if-else instead of conditional operators in ar71xx_add_device_eth 
SVN-Revision: 29101
 2011-11-14 07:38:05 +00:00
Florian Fainelli 7f787707de build images for Pirelli A226M (#10409) 
SVN-Revision: 29045
 2011-11-13 19:19:22 +00:00
Florian Fainelli 5dc2098448 register uart0 on DWV-S0 boards (#10409) 
SVN-Revision: 29044
 2011-11-13 19:19:18 +00:00
Florian Fainelli 56a96ba876 refresh 3.0 patches 
SVN-Revision: 29043
 2011-11-13 19:19:14 +00:00
Florian Fainelli 54da5cf11f refresh 2.6.39 patches 
SVN-Revision: 29042
 2011-11-13 19:19:10 +00:00
Florian Fainelli 717a4391d7 rename 456-board_DWV-S0_ehci.patch to 456-board_DWV-S0_fixes.patch 
SVN-Revision: 29041
 2011-11-13 19:19:05 +00:00
Florian Fainelli c093c9df34 fix typo, load ip17xx switch module 
SVN-Revision: 29039
 2011-11-13 18:41:26 +00:00
Gabor Juhos 368bbc510b ar71xx: enable has_gbit flag on AR724{0,1} 
SVN-Revision: 29026
 2011-11-13 17:36:36 +00:00
Gabor Juhos 15d7016c9f ar71xx: fixup onboard PCIe chip registration on the DB120 board 
SVN-Revision: 29022
 2011-11-13 12:48:03 +00:00
Gabor Juhos f623066e60 ar71xx: drop DB120_WMAC_MAC_OFFSET, it is not needed 
SVN-Revision: 29021
 2011-11-13 12:48:01 +00:00
Gabor Juhos d2316b2a45 ar71xx: ag71xx: add support for getting switch port link status 
SVN-Revision: 29017
 2011-11-13 11:27:04 +00:00
Gabor Juhos d0db89133c ar71xx: remove mii_ctrl resources of the ethernet devices 
SVN-Revision: 29016
 2011-11-13 11:27:03 +00:00
Gabor Juhos 34015ed6e8 ar71xx: ag71xx: remove unused mii_ctrl field from struct ag71xx 
SVN-Revision: 29015
 2011-11-13 11:27:01 +00:00
Gabor Juhos 2d882cff23 ar71xx: ag71xx: remove unused mii_cfg related functions and defines 
SVN-Revision: 29014
 2011-11-13 11:27:00 +00:00
Gabor Juhos 538a9493b9 ar71xx: set MII interface speed from the set_speed callbacks 
SVN-Revision: 29013
 2011-11-13 11:26:59 +00:00
Gabor Juhos 93cd46be13 ar71xx: rename set_pll callback to set_speed in ag71xx_platform_data 
Also rename the corresponding callback functions.

SVN-Revision: 29012
 2011-11-13 11:26:57 +00:00
Gabor Juhos 9579bb4267 ar71xx: ag71xx: remove MII interface setup code 
SVN-Revision: 29011
 2011-11-13 11:26:56 +00:00
Gabor Juhos da64ce8603 ar71xx: configure MII interface type from ar71xx_setup_phy_if_mode 
SVN-Revision: 29010
 2011-11-13 11:26:54 +00:00
Gabor Juhos 0112153a0e ar71xx: fix occasional kernel hangs during boot on AR934x 
The patch taken from the linux-mips mailing list.

The Kernel hangs occasionally during boot after
"Calibrating delay loop..". This is caused by the
c0_compare_int_usable() routine in cevt-r4k.c
returning false which causes the system to disable
the timer and hang later. The false return happens
because the routine is using a series of four calls
to irq_disable_hazard() as a delay while it waits
for the timer changes to propagate to the cp0 cause
register. On newer MIPS cores, like the 74K, the
series of irq_disable_hazard() calls turn into ehb
instructions and can take as little as a few clock
ticks for all 4 instructions. This is not enough of
a delay, so the routine thinks the timer is not
working.

This fix uses up to a max number of cycle counter
ticks for the delay and uses back_to_back_c0_hazard()
instead of irq_disable_hazard() to handle the hazard
condition between cp0 writes and cp0 reads.

SVN-Revision: 29009
 2011-11-13 11:26:52 +00:00
Gabor Juhos 1afc76ea13 ar71xx: refresh kernel patches 
SVN-Revision: 29008
 2011-11-13 11:26:51 +00:00
Jonas Gorski d8acb75009 linux: update 3.1 to 3.1.1 
SVN-Revision: 29007
 2011-11-13 10:48:05 +00:00
John Crispin a8797d0de6 lantiq: add uci-defaults code for handling leds 
SVN-Revision: 29004
 2011-11-12 23:40:21 +00:00
John Crispin 832e02cd77 lantiq: add /lib/lantiq.sh and make hotplug handlers use it 
SVN-Revision: 29003
 2011-11-12 23:40:16 +00:00
John Crispin 5dcbbf0160 lantiq: rename leds 
SVN-Revision: 29002
 2011-11-12 23:40:12 +00:00
John Crispin d84b7596d9 lantiq: split compat headers out of bsp header patch 
SVN-Revision: 29001
 2011-11-12 23:40:07 +00:00
John Crispin 2cff80f015 lantiq: adds hotplug handler for loading rt2x00 firmware 
SVN-Revision: 29000
 2011-11-12 23:40:01 +00:00
John Crispin 3660c51c40 lantiq: adds hotplug handler for handling buttons and makes w303v work with it 
SVN-Revision: 28999
 2011-11-12 23:39:56 +00:00
John Crispin 4248705108 lantiq: cleanup default package selection 
SVN-Revision: 28998
 2011-11-12 23:39:51 +00:00
John Crispin eb20ab87e6 lantiq: w303v has its rt2860 eep on the nor flash. tell compat-wireless how to use it 
SVN-Revision: 28994
 2011-11-12 18:41:15 +00:00
Gabor Juhos bbfaaeffd6 kernel: ar8216: add support for the AR8236 switch 
SVN-Revision: 28993
 2011-11-12 14:09:52 +00:00
Gabor Juhos ecb3690d0a kernel: ar8216: move port vlan setup into a separate function 
SVN-Revision: 28992
 2011-11-12 14:09:50 +00:00
Gabor Juhos 5ad763075e ar71xx: use the button for WPS control on the DB120 
SVN-Revision: 28990
 2011-11-12 12:50:20 +00:00
Gabor Juhos 4555be2bec ar71xx: register the second ethernet interface on the DB120 board 
SVN-Revision: 28989
 2011-11-12 12:50:19 +00:00
Gabor Juhos 368c6605a0 ar71xx: implement SoC specific phy interface setup 
SVN-Revision: 28988
 2011-11-12 12:50:18 +00:00
Gabor Juhos 21d317b9cc ar71xx: move phy interface setup into a separate function 
SVN-Revision: 28987
 2011-11-12 12:50:16 +00:00
Gabor Juhos aff0c84ffa ar71xx: register both MDIO bus on the DB120 board 
SVN-Revision: 28986
 2011-11-12 12:09:59 +00:00
Gabor Juhos b144249108 ar71xx: add AR934X specific MDIO registration code 
SVN-Revision: 28985
 2011-11-12 12:09:56 +00:00
Gabor Juhos f835106c8c ar71xx: add a secondary mdio bus 
SVN-Revision: 28984
 2011-11-12 12:09:54 +00:00
Gabor Juhos 90a42da270 ar71xx: rename ar71xx_mdio_* structures to ar71xx_mdio0_* 
SVN-Revision: 28983
 2011-11-12 12:09:50 +00:00
Gabor Juhos 9daa2149fd ar71xx: add an id argument to ar71xx_add_device_mdio 
SVN-Revision: 28982
 2011-11-12 12:09:48 +00:00
Gabor Juhos b07b687aec ar71xx: pass netdev and miidev pointer to ar71xx_add_device_dsa 
SVN-Revision: 28981
 2011-11-12 12:09:42 +00:00
Gabor Juhos a9216bb76e ar71xx: add AR934x specific USB setup 
SVN-Revision: 28980
 2011-11-12 10:54:20 +00:00
Gabor Juhos 346e44105a ar71xx: register the first ethernet interface on the DB120 board 
SVN-Revision: 28979
 2011-11-12 10:54:18 +00:00
Gabor Juhos b1ba5e2f3d ar71xx: allow to register ethernet interfaces for AR934X 
SVN-Revision: 28978
 2011-11-12 10:54:17 +00:00
Gabor Juhos 2f9e535e89 ar71xx: ag71xx: use fixed link parameters if the mii bus is not registered 
SVN-Revision: 28977
 2011-11-12 10:54:16 +00:00
Gabor Juhos e962b07c8b ar71xx: add AR934X specific bootstrap and reset register bits 
SVN-Revision: 28976
 2011-11-12 10:54:15 +00:00
Gabor Juhos d461fdd519 ar71xx: add diag support for the DB120 board 
SVN-Revision: 28975
 2011-11-12 10:54:10 +00:00
Gabor Juhos d8db8e94c8 ar71xx: fix GPIO direction setup for AR934x 
SVN-Revision: 28974
 2011-11-12 10:54:09 +00:00
Gabor Juhos 43e993e5f5 ar71xx: fix AR934X clock frequency calculation 
SVN-Revision: 28973
 2011-11-12 10:54:08 +00:00
Gabor Juhos 8687fc3e41 ar71xx: generate ubootenv from uci-defaults instead of providing defconfig 
I noticed most of /etc/defconfig was replaced by /etc/uci-defaults, which is
indeed much nicer. So I moved over ubootenv from having a defconfig-entry to
also be generated from uci-defaults.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 28971
 2011-11-12 10:54:04 +00:00
John Crispin fda4ee22a0 lantiq: improve falcon package selection 
SVN-Revision: 28962
 2011-11-11 21:59:11 +00:00
John Crispin e1dc73be90 lantiq: fix breakage introduced in 3.1 bump 
SVN-Revision: 28961
 2011-11-11 21:59:01 +00:00
Jo-Philipp Wich be49daffc8 base-files, target: assign name to system timeserver section, makes it easier to set servers on the cli 
SVN-Revision: 28933
 2011-11-10 12:16:41 +00:00
Jonas Gorski f53128f79b target: linux: mtd: fix MTDREFRESH to an arbitrary high number 
To make the ioctl number "stable", use an arbitrary high number to prevent
conflicts with new mtd ioctls that would push MTDREFRESH's number.

Also make mtd use the in-kernel mtd headers.

SVN-Revision: 28893
 2011-11-09 21:16:36 +00:00
Felix Fietkau 7a2efd8c28 ar71xx: remove dead code 
SVN-Revision: 28851
 2011-11-08 00:33:20 +00:00
Felix Fietkau 94309039b7 ar71xx: on ar7240, exclude ports from their own port vlan destination mask 
SVN-Revision: 28850
 2011-11-08 00:33:15 +00:00
Felix Fietkau b06efd636a kernel: add a top level menuconfig option for enabling lockdep 
SVN-Revision: 28848
 2011-11-08 00:32:57 +00:00
Gabor Juhos 87704b8078 ar71xx: create TL-WA901ND network config from uci-defaults 
SVN-Revision: 28833
 2011-11-07 21:44:24 +00:00
Gabor Juhos 09fdfa444f ar71xx: create ALL0258N network config from uci-defaults 
SVN-Revision: 28832
 2011-11-07 21:44:23 +00:00
Gabor Juhos 63348f5fed ar71xx: create NBG{460N,550N,550NH} network config from uci-defaults 
SVN-Revision: 28831
 2011-11-07 21:44:20 +00:00
Gabor Juhos c3692c8331 ar71xx: create WZR-HP-G300NH network config from uci-defaults 
SVN-Revision: 28830
 2011-11-07 21:44:17 +00:00
Gabor Juhos ee1a07a11d ar71xx: create RB-493G network config from uci-defaults 
SVN-Revision: 28829
 2011-11-07 21:44:12 +00:00
Gabor Juhos d82d063d81 ar71xx: create TL-WR1043ND network config from uci-defaults 
SVN-Revision: 28828
 2011-11-07 21:44:11 +00:00
Gabor Juhos 68be590894 ar71xx: create WRT160NL network config from uci-defaults 
SVN-Revision: 28827
 2011-11-07 21:44:09 +00:00
Gabor Juhos 83901e47c9 ar71xx: create PB92 network config from uci-defaults 
SVN-Revision: 28826
 2011-11-07 21:44:08 +00:00
Gabor Juhos 22ab9fc9ad ar71xx: create DIR-825-B1 network config from uci-defaults 
SVN-Revision: 28825
 2011-11-07 21:44:07 +00:00
Gabor Juhos e866ba5753 ar71xx: create TL-WR{841N-v1,941ND} network config from uci-defaults 
SVN-Revision: 28824
 2011-11-07 21:44:03 +00:00
Gabor Juhos 9298c7afe5 ar71xx: create RB-450 network config from uci-defaults 
SVN-Revision: 28823
 2011-11-07 21:44:02 +00:00
Gabor Juhos ac256f97bd ar71xx: create RB-450G, RouterStation Pro network config from uci-defaults 
SVN-Revision: 28822
 2011-11-07 21:44:01 +00:00
Gabor Juhos 944ac3f6cf ar71xx: create RB-433{,U} network config from uci defaults 
SVN-Revision: 28821
 2011-11-07 21:43:58 +00:00
Gabor Juhos 6e8390ae6c ar71xx: create even more network configs from the uci-defaults script 
Create the default network configuration dynamically for the
AR724x/AR9331 boards. Some other boards are using the same
configuration, so convert those as well.

SVN-Revision: 28820
 2011-11-07 21:43:56 +00:00
Gabor Juhos b62560413a ar71xx: create more network configs from the uci-defaults script 
Create the default network configuration dynamically for the boards with
swapped eth0, eth1 interfaces.

SVN-Revision: 28819
 2011-11-07 21:43:54 +00:00
Gabor Juhos 6c92b26bac ar71xx: create a bunch of network configs from the uci-defaults script 
Create the default network configuration dynamically for the boards with
a single ethernet interface.

SVN-Revision: 28818
 2011-11-07 21:43:52 +00:00
Gabor Juhos 0a8e5dbf7b ar71xx: create generic network config from an uci-defaults script 
SVN-Revision: 28817
 2011-11-07 21:43:51 +00:00
Gabor Juhos 54c034ae7a ar71xx: remove AP81 defconfig, it is the same as the generic config 
SVN-Revision: 28816
 2011-11-07 21:34:33 +00:00
Gabor Juhos 5b6cc3eb9f ar71xx: change generated Buffalo firmware versions 
With version 1.76 the upgrade may fail with newer Buffalo firmwares with
a message like this:
"You can not update the firmware because the firmware version is earlier
than 1.82. Please use 1.82 or later version for firmware update."

SVN-Revision: 28815
 2011-11-07 21:34:32 +00:00
Imre Kaloz cc2cf8f3d5 update 3.1 patches 
SVN-Revision: 28814
 2011-11-07 21:13:13 +00:00
Imre Kaloz c4bc2552a3 update arm mach-types 
SVN-Revision: 28813
 2011-11-07 21:12:26 +00:00
Gabor Juhos eb9ef60e2d ar71xx: enable sysupgrade on the WHR-G301N and WHR-HP-GN boards 
SVN-Revision: 28812
 2011-11-07 20:25:00 +00:00
Gabor Juhos 8456840d82 ar71xx: wrap long lines in the upgrade script 
SVN-Revision: 28811
 2011-11-07 20:24:59 +00:00
Gabor Juhos c60baf78ce ar71xx: fix WHR-HP-G300N firmware partition offset 
SVN-Revision: 28810
 2011-11-07 20:24:57 +00:00
Gabor Juhos b27254a2c5 ar71xx: add default network configuration for the WHR-HP-GN 
SVN-Revision: 28807
 2011-11-07 13:32:43 +00:00
Gabor Juhos 034b2b7cde ar71xx: build image for the Buffalo WHR-HP-GN 
SVN-Revision: 28806
 2011-11-07 12:59:11 +00:00
Gabor Juhos a801d620a7 ar71xx: add support for the Buffalo WHR-HP-GN board 
SVN-Revision: 28805
 2011-11-07 12:59:10 +00:00
Gabor Juhos 0d9ae0a036 ar71xx: build image for the Buffalo WHR-G301N 
SVN-Revision: 28804
 2011-11-07 12:59:08 +00:00
Gabor Juhos 4509af17ed ar71xx: add support for the Buffalo WHR-G301N board 
SVN-Revision: 28803
 2011-11-07 12:59:07 +00:00
Gabor Juhos 63784ea2bc ar71xx: fix WHR-HP-G300N image generation 
SVN-Revision: 28802
 2011-11-07 12:59:05 +00:00
Gabor Juhos b3b21cb3bf ar71xx: enable WHR-HP-G300N support in kernel config 
SVN-Revision: 28801
 2011-11-07 12:59:04 +00:00
Gabor Juhos 4aace1e2e3 ar71xx: fix WHR-HP-G300N MTD partitions 
SVN-Revision: 28800
 2011-11-07 12:59:03 +00:00
Michael Büsch 05ce57c005 omap24xx: Add cbus tahvo locking fix. 
SVN-Revision: 28767
 2011-11-05 16:10:18 +00:00
Michael Büsch 6288ac7ed4 omap24xx: Fix n810bm compilation 
SVN-Revision: 28766
 2011-11-05 16:01:53 +00:00
Gabor Juhos 297ac9a7f1 kernel: swconfig: add a missing unlock in error path 
SVN-Revision: 28753
 2011-11-04 14:38:31 +00:00
Jo-Philipp Wich d6f02b62d4 add timeserver config to target specific system configs as well 
SVN-Revision: 28750
 2011-11-04 12:53:35 +00:00
Felix Fietkau 82bd0a43f1 kernel: merge regression fixes for the netfilter patches to the 3.1 kernel patches (patch by tripolar) 
SVN-Revision: 28734
 2011-11-03 20:02:31 +00:00
John Crispin 95d36d3efe lantiq: remove obseleted folder. we use 3.1 now 
SVN-Revision: 28728
 2011-11-03 16:33:27 +00:00
John Crispin ea36ad76bc lantiq: bump to 3.1 
SVN-Revision: 28721
 2011-11-03 15:15:52 +00:00
Gabor Juhos 4c985724af ar71xx: add missing AR71XX_MACH_TL_WR741ND_V4 
SVN-Revision: 28709
 2011-11-01 14:38:12 +00:00
Gabor Juhos fc8adbb854 ar71xx: build image for the TL-WR741ND v4 board 
SVN-Revision: 28708
 2011-11-01 11:20:55 +00:00
Gabor Juhos 91f08d47c2 ar71xx: add initial support for the TL-WR741ND v4 board 
The ethernet port LEDs are not working yet.

SVN-Revision: 28706
 2011-11-01 11:20:52 +00:00
Gabor Juhos 21e651c9a1 ar71xx: add AR933X GMAC register defines 
SVN-Revision: 28705
 2011-11-01 11:20:50 +00:00
Gabor Juhos 43e2e2e4ef ar71xx: combine LEDs setup in one file 
SVN-Revision: 28704
 2011-11-01 11:20:49 +00:00
Gabor Juhos f372620ffa ar71xx: unify LED names on Planex boards 
SVN-Revision: 28703
 2011-11-01 11:20:47 +00:00
Gabor Juhos 66ab406d5a ar71xx: unify LED names on Buffalo boards 
SVN-Revision: 28702
 2011-11-01 11:20:46 +00:00
Gabor Juhos e7586959df ar71xx: unify LED names on TP-Link boards 
SVN-Revision: 28701
 2011-11-01 11:20:44 +00:00
Gabor Juhos 3a7b12a27d ar71xx/all0258n: sysupgrade support 
U-Boot on the ALL0258N needs offset, size and md5 for kernel and rootfs to be
stored in the U-Boot environment.
If the checksums don't match during boot, a failsafe-system is booted instead.
This patch adds a board-specific sysupgrade hack for the all0258n which
calculates and updates the checksums for the U-Boot environment.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 28700
 2011-11-01 09:23:32 +00:00
Gabor Juhos f40557a692 ar71xx/all0258n: add default config 
This adds default network and uboot-env settings for the ALL0258N.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 28699
 2011-11-01 09:23:31 +00:00
Gabor Juhos 06d9653b36 ar71xx: remove default network config of the mzk-w04nu board as well 
It works with the generic config.

SVN-Revision: 28695
 2011-11-01 09:23:25 +00:00
Gabor Juhos 693c777eaf ar71xx: remove LED setup of nonexistent interfaces on RB750 
SVN-Revision: 28693
 2011-10-31 14:26:56 +00:00
Gabor Juhos 2bcd612e72 ar71xx: remove default network config of the wnr2000 board 
It is the same as the generic configuration.

SVN-Revision: 28692
 2011-10-31 14:26:51 +00:00
Vasilis Tsiligiannis 17ccd4aec4 rt305x: Create factory image for Fonera 2.0n 
SVN-Revision: 28689
 2011-10-31 09:23:44 +00:00
Michael Büsch 29958120a2 omap24xx: Default to linux-3.1 
SVN-Revision: 28687
 2011-10-30 22:42:00 +00:00
Michael Büsch c00fd42353 omap24xx: Fix n810 LCD initialization 
SVN-Revision: 28685
 2011-10-30 20:31:45 +00:00
Michael Büsch f37c24d35f omap24xx: Fix n810 boot 
SVN-Revision: 28683
 2011-10-30 18:46:45 +00:00
Gabor Juhos 39b3bfcf6a ar71xx/sysupgrade: use $magic_long instead of $magic when comparing with a 32-bit value 
Aparently $magic_long was meant here instead of $magic when comparing with
32-bit values.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 28678
 2011-10-30 13:06:30 +00:00
Michael Büsch fd0e6e1452 omap24xx: Refresh 3.1 config 
SVN-Revision: 28677
 2011-10-29 22:52:44 +00:00
Michael Büsch ba9ee13744 omap24xx: Refresh 3.1 patches 
SVN-Revision: 28676
 2011-10-29 22:52:07 +00:00
Michael Büsch e184bfe6f0 Fix tusb patch 
SVN-Revision: 28675
 2011-10-29 22:33:59 +00:00
Michael Büsch a3db2f2055 omap24xx: Fix MUSB compile 
SVN-Revision: 28674
 2011-10-29 22:26:27 +00:00
Michael Büsch 5dde93038f omap24xx: Add n800 touchscreen and keypad drivers. Thanks to Marat Radchenko. 
SVN-Revision: 28673
 2011-10-29 20:35:36 +00:00
Michael Büsch 7d123a86e3 omap24xx: Add 3.1 patchset. 
SVN-Revision: 28672
 2011-10-29 19:02:50 +00:00
Gabor Juhos 415814f051 ar71xx: fix typos in image/Makefile 
SVN-Revision: 28618
 2011-10-27 07:54:52 +00:00
Gabor Juhos 1646346798 ar71xx: add initial support for the OpenMesh OM2P board 
Based on a patch by Marek Lindner <marek@open-mesh.com>

SVN-Revision: 28617
 2011-10-27 07:54:51 +00:00
Gabor Juhos d02f22fea1 ar71xx/all0258n: fix partition layout 
A miscalculation in the original patch makes OpenWrt destroy the failsafe image.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 28615
 2011-10-27 07:54:47 +00:00
Michael Büsch f15f6bc76f Update my email address 
SVN-Revision: 28603
 2011-10-26 14:54:26 +00:00
Felix Fietkau b17bfe4f68 x86: disable crashlog, ioremap of RAM does not work properly here 
SVN-Revision: 28599
 2011-10-26 11:49:25 +00:00
Gabor Juhos 4a70cace09 ar71xx: create image for the WNDR3800 
This adds support for the Netgear WNDR3800, it is almost the same as
the WNDR3700v2. It just has more RAM so the hd_id had to be adjusted.

Signed-off-by: Petri Rosenström <petri.rosenstrom@gmail.com>

SVN-Revision: 28597
 2011-10-26 06:12:47 +00:00
Jo-Philipp Wich 3d1d93cb0c target: remove CONFIG_IDE_PROC_FS support as well 
SVN-Revision: 28586
 2011-10-25 16:40:06 +00:00
Jo-Philipp Wich de7cae82e9 brcm47xx: revert accidentially added EARLY_PRINTK symbol from previous commit 
SVN-Revision: 28585
 2011-10-25 16:19:52 +00:00
Jo-Philipp Wich a9e64493d8 target: globally disable BSD process accounting 
SVN-Revision: 28584
 2011-10-25 16:18:36 +00:00
Gabor Juhos ee8077f0fe ramips: Support for NexAira BC2 
The preconfiguration of the USB LED has benn move to the
/etc/uci-defaults/leds script. [juhosg]

Signed-off-by: Adam Porter <porter.adam at gmail.com>

SVN-Revision: 28571
 2011-10-24 21:49:36 +00:00
Gabor Juhos 18452a753b ramips: fix switch-port assignment for HW550-3G 
WAN is on swtich port 0 for Aztech HW550-3G.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 28570
 2011-10-24 21:49:32 +00:00
Gabor Juhos 68a01c0180 ramips: combine led setup for all boards in one file 
This removes unnecessary duplication and simplifies led setup for new
boards. It would be a one line change most likely.

Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>

SVN-Revision: 28569
 2011-10-24 21:49:31 +00:00
Gabor Juhos c8b9086ac5 ar71xx: build image for the Buffalo WHR-HP-G300N 
Based on a patch by Yoichi Shinoda <shinoda@jaist.ac.jp>

SVN-Revision: 28568
 2011-10-24 21:49:29 +00:00
Gabor Juhos 9d51cda2db ar71xx: Buffalo WHR-HP-G300N kernel support 
The initial support for the Buffalo WHR-HP-G300N box.
The code was confirmed to boot and run, but not tested in depth.

Known problem: iw phy phy0 info shows:
	Coverage class: 0 (up to 0m)
	Available Antennas: TX 0 RX 0

Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>

SVN-Revision: 28567
 2011-10-24 21:49:26 +00:00
Gabor Juhos 0ab6be2ba3 ar71xx: build image for the Allnet ALL0258N board 
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 28565
 2011-10-24 21:49:23 +00:00
Gabor Juhos d96e321bd1 ar71xx: add kernel support for the Allnet ALL0258N board 
This patchs adds support for the Allnet ALL0258N outdoor AP/bridge.
The ALL0258N is based on the AR7240 SoC paired with an AR9285 radio,
it got 8MB of NOR and 32MB SDRAM.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 28564
 2011-10-24 21:49:21 +00:00
Gabor Juhos ef41e0a61c ar71xx: don't override CONFIG_FSNOTIFY 
SVN-Revision: 28563
 2011-10-24 21:49:18 +00:00
Jo-Philipp Wich b61de9c865 base-files: make sure inittab-console-fixup returns with success (#10275) 
SVN-Revision: 28562
 2011-10-24 21:35:43 +00:00
Nicolas Thill b0d9bccafc x86: allow VDI & VMDK images for all subtargets (closes: #10255) 
SVN-Revision: 28518
 2011-10-22 13:09:15 +00:00
Jonas Gorski 40d088446f linux: generic: refresh patches for 3.1-rc10 
Hopefully the last one and identical to final.

SVN-Revision: 28492
 2011-10-20 10:32:44 +00:00
Jonas Gorski a136b67604 linux: ar71xx: add support for Mikrotik Routerboard RB493G 
SVN-Revision: 28423
 2011-10-11 23:05:16 +00:00
Jonas Gorski 03f91068d1 ar71xx: add a workaround for ar8316 not always driving the TA bit to low 
AR8316 behind a GPIO bitbanged MDIO bus fails to drive the turnaround bit
to low despite returning a valid value. Ignore it and just use the
returned value anyway.

SVN-Revision: 28422
 2011-10-11 23:05:13 +00:00
Jonas Gorski b7a2a74823 ar8216: use mdiobus_{read,write} to ensure proper locking 
SVN-Revision: 28421
 2011-10-11 23:05:10 +00:00
John Crispin 0a866293bd * update patches to 3.0 
* add basic vr9 support
* backport 3.1 fixes
* backport 3.2 queue (falcon)

SVN-Revision: 28405
 2011-10-10 15:13:46 +00:00
Jonas Gorski c674c874b7 ag71xx: close a race between the phy state machine and link state 
A fast stop/start cycle could leave the ag71xx interrupts and tx engine
disabled when using a phy driver with a fixed link and the start/stop
happens between two phy state machine polls.

Prevent this by always forcing the link down on stop regardless of phy
state and having a phy connected.

SVN-Revision: 28380
 2011-10-08 11:37:14 +00:00
Jo-Philipp Wich ce5e1abbb7 add IDs for Huawai K3770, K3771, K4510 and K4511 to option driver 
SVN-Revision: 28376
 2011-10-06 18:23:16 +00:00
Florian Fainelli 829ae01f16 add missing kernel config symbols 
SVN-Revision: 28363
 2011-10-04 09:15:37 +00:00
Daniel Dickinson b0345ef184 Was specifying input-polled-keys and not input-keys-polled as the module name. Philip Prindeville - 2011-10-03 03:58:17 
SVN-Revision: 28357
 2011-10-03 04:39:54 +00:00
Daniel Dickinson c0a625ffbf Add patch for linux-3.0 as well. 
Fix typo from previous submission with input-keys-polled.
Philip Prindeville - 2011-10-03 01:44:55

SVN-Revision: 28356
 2011-10-03 03:09:20 +00:00
Daniel Dickinson 7e372b6dcf New x86 platform specific symbol needed for 3.1-rc3. 2011-10-03 03:06:29 +00:00
Daniel Dickinson 541aa8e38e A lot of these options get set automatically when Geode is selected. 
Don't make the config more complicated than it needs to be.
Philip Prindeville - 2011-08-29 03:15:27

SVN-Revision: 28353
 2011-10-03 03:02:42 +00:00
Florian Fainelli 3802769ea1 add vlan definitions for Siemens SE505v2 
Hi,

this patch adds the correct vlan definitions for the Siemens SE505v2. It
applies to trunk as well as backfire (please apply here too). On
backfire this also patches brcm-2,4, because brcm47xx base-files is just
symlinked to brcm-2.4.

It also fixes two whitespace issues.

Tested with brcm47xx on both trunk and backfire branch and works as
expected.

Signed-off-by: Manuel Munz <freifunk@somakoma.de>

SVN-Revision: 28336
 2011-09-30 12:55:33 +00:00
John Crispin aecc73de77 The enable function was using the global timeout variable for local operations. This resulted in the value of the global variable being corrupted, thus breaking the code. 
SVN-Revision: 28310
 2011-09-26 10:35:51 +00:00
John Crispin 1ef8066bff * remove obseleted m25p80 patch 
SVN-Revision: 28309
 2011-09-26 09:36:02 +00:00
John Crispin cf59e7255d * rebase 3.0 patches * fold some fixes into existing patches 
SVN-Revision: 28308
 2011-09-26 09:35:02 +00:00
Gabor Juhos 6ac4156136 ar71xx: fix MAC addresses on the DIR-825-B1 board 
Patch-by: Lukas Kuna

SVN-Revision: 28295
 2011-09-23 19:56:39 +00:00
Gabor Juhos e45d7d7006 ar71xx: enable login only on the system console by default 
SVN-Revision: 28294
 2011-09-23 19:56:38 +00:00
Alexandros C. Couloumbis 5fc14dfb87 linux/generic: commit an upstream kernel 3.0 patch (fixes busubox-1.19.2 build failure) 
SVN-Revision: 28293
 2011-09-23 10:00:13 +00:00
Gabor Juhos 49ac36e818 ar71xx: build images for the TP-Link TL-WR703N v1 board 
Based on a patch by dongyuqi <729650915@qq.com>

SVN-Revision: 28279
 2011-09-21 11:47:56 +00:00
Gabor Juhos 733399600f ar71xx: add support for the TP-Link TL-WR703N v1 board 
Based on a patch by dongyuqi <729650915@qq.com>

SVN-Revision: 28277
 2011-09-21 11:47:53 +00:00
Gabor Juhos d3617ac7d3 ar71xx: add AR933x specific USB setup function 
SVN-Revision: 28276
 2011-09-21 11:47:51 +00:00
Gabor Juhos 91340d8af7 ar71xx: add ar71xx_device_reset_rmw helper 
SVN-Revision: 28275
 2011-09-21 11:47:50 +00:00
Gabor Juhos 9fa51d5c38 ar71xx: fix copy&paste bug in WZRHPAG300H profile description 
SVN-Revision: 28274
 2011-09-21 11:47:48 +00:00
Gabor Juhos 079e746fc4 ar71xx: remove 'default [yn]' from machine Kconfig entries 
SVN-Revision: 28273
 2011-09-21 11:47:47 +00:00
Gabor Juhos 73dac07c44 ar71xx: sort AR71XX_MACH_* entries 
SVN-Revision: 28272
 2011-09-21 11:47:45 +00:00
Gabor Juhos ef2431c8d9 ar71xx: create image for the TP-Link TL-WR743ND v1 
Same hardware as WR741ND but with PoE support.

Signed-off-by: Paul Fertser <fercerpav@gmail.com>

SVN-Revision: 28271
 2011-09-21 11:47:44 +00:00
Gabor Juhos 76d0d1a837 ar71xx: create image for the TP-Link TL-WR740N v3 
Signed-off-by: Martin Raykov <martin.raykov@gmail.com>

SVN-Revision: 28269
 2011-09-21 11:47:40 +00:00
Gabor Juhos 93c093057d generic: jumbo frames support for rtl8366s 
This patch adds the option to enable jumbo frames on the rtl8366s
switch. This is almost exactly the same as the first patch at
https://dev.openwrt.org/ticket/7977 and it has been requested
in a comment there.

I have tested this and it successfully allows devices on the switch
using jumbo frames to communicate.

Signed-off-by: Ash Hughes <ashley.hughes@blueyonder.co.uk>

SVN-Revision: 28267
 2011-09-21 11:47:38 +00:00
Felix Fietkau 1bdf65f580 ar71xx: fix register range check for DMA stuck checks (thx, Frédéric Moulins) 
SVN-Revision: 28213
 2011-09-11 17:44:12 +00:00
Jo-Philipp Wich ba46c7b3c6 Xen DomU: make sure kernel is gzip compressed, pygrub cannot handle xz 
SVN-Revision: 28197
 2011-09-08 22:18:26 +00:00
Felix Fietkau 65d809ef19 ar71xx: do not count normal interrupts as spurious (fixes #10037) 
SVN-Revision: 28182
 2011-09-06 05:38:23 +00:00
Felix Fietkau de8cabe839 ar71xx: clean up profiles, put in kmod-ath9k and wpad-mini by default (fixes #9954) 
SVN-Revision: 28173
 2011-09-05 18:37:48 +00:00
Imre Kaloz ed2c8bdc92 upgrade testing kernel support to 3.1 
SVN-Revision: 28165
 2011-09-04 15:06:05 +00:00
Imre Kaloz 4f0b1a6602 cleanup config 
SVN-Revision: 28164
 2011-09-04 15:02:37 +00:00
Imre Kaloz 0569cff6e1 refresh patches 
SVN-Revision: 28163
 2011-09-04 15:01:56 +00:00
Imre Kaloz 6d17e13cde add missing symbols 
SVN-Revision: 28162
 2011-09-04 15:01:25 +00:00
Felix Fietkau 24dfe525c2 brcm47xx: fix padding of trx images, padjffs2 does not work properly on empty files by default 
SVN-Revision: 28125
 2011-08-29 21:23:51 +00:00
Felix Fietkau cd2c68501c ar71xx: fix ethernet PLL setting on ar7242 
SVN-Revision: 28124
 2011-08-29 21:23:46 +00:00
Hamish Guthrie cc037a5e27 Remove subpage align patch 
SVN-Revision: 28086
 2011-08-25 11:49:55 +00:00
Hamish Guthrie 21f7943561 Re-order patches, add nand sub-page alignment 
SVN-Revision: 28084
 2011-08-25 10:37:30 +00:00
Florian Fainelli cbd28ad0ec bump to 2.6.39.4 
Since linux gets developed on x86 more than all other hardware,
hardly makes sense to have our default x86 version be trailing
by over a year.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 28082
 2011-08-25 09:35:51 +00:00
Florian Fainelli d2652dee9d update alix2 platform driver 
Add support for Ed Wildgoose's alix platform driver plus my
enhancement to add GPIO soft button support.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 28081
 2011-08-25 09:35:45 +00:00
Jonas Gorski 71adaae258 kernel: add two missing config symbols for 3.1 
SVN-Revision: 28080
 2011-08-24 11:43:25 +00:00
Gabor Juhos 72e117ec79 ramips: rt305x: add support for the ZyXEL NBG-419N board 
SVN-Revision: 28078
 2011-08-22 20:41:49 +00:00
Gabor Juhos 4b96d3af2a ramips: rt305x: remove unused defines from mach-nw718.c 
SVN-Revision: 28077
 2011-08-22 20:41:48 +00:00
Gabor Juhos 462ca22e9c ramips: sort Makefile entries 
SVN-Revision: 28076
 2011-08-22 20:41:47 +00:00
Gabor Juhos d50494f3bb ramips: sort RAMIPS_MACH_* defines 
SVN-Revision: 28075
 2011-08-22 20:41:45 +00:00
Gabor Juhos 90686691ce ramips: fix wireless firmware extraction for wr512-3gn 
Signed-off-by: Andrew Andrianov <necromant@necromant.ath.cx>

SVN-Revision: 28073
 2011-08-22 18:08:45 +00:00
Gabor Juhos f0049824b9 ramips: remove 'default [yn]' keywords from machine Kconfig entries 
SVN-Revision: 28054
 2011-08-19 15:55:12 +00:00
Gabor Juhos 6720025497 ramips: rt305x: fix wr512n image generation 
SVN-Revision: 28053
 2011-08-19 15:55:11 +00:00
Gabor Juhos 9085b05d9e ramips: rt305x: support for wr512-3gn-like routers 
Signed-off-by: Andrew Andrianov <necromant@necromant.ath.cx>

SVN-Revision: 28052
 2011-08-19 15:55:10 +00:00
Gabor Juhos 46b101ad0a ramips: register usb on Belkin F5D8235 v2 and Argus ATP-52-B routers 
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 28051
 2011-08-19 15:55:08 +00:00
Gabor Juhos 05209860da ramips: fix wireless on Belkin F5D8235 v2 
Fix wireless firmware extract from flash for Belkin F5D8235 v2.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 28050
 2011-08-19 15:55:07 +00:00
Gabor Juhos f8ab604eb6 ramips: fix typo in default packages 
Fix fivebytepypo - there is no such kernel module wpad-mini :)

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 28049
 2011-08-19 15:55:05 +00:00
Hamish Guthrie 048d4aca76 omap35xx: Add 3.0.3 kernel support for Gumstix 
SVN-Revision: 28047
 2011-08-19 12:00:08 +00:00
Hauke Mehrtens 464539b074 kernel: update to version 3.0.3 
SVN-Revision: 28043
 2011-08-18 12:54:12 +00:00
Jo-Philipp Wich ebb152295b fix the default network configuration for the ASUS WL-330gE (#8751) 
SVN-Revision: 28024
 2011-08-17 03:16:59 +00:00
Hauke Mehrtens 09b1073f9b kernel: update kernel to version 2.6.39.4 
SVN-Revision: 28022
 2011-08-16 22:04:10 +00:00
Jonas Gorski 3e94ee9642 kernel: generic: refresh patches for 3.1-rc2 
SVN-Revision: 28021
 2011-08-16 21:42:15 +00:00
Gabor Juhos ace8ce0845 ramips: use maccalc instead of hexdump + sed 
SVN-Revision: 28007
 2011-08-15 19:00:23 +00:00
Gabor Juhos bfc47ffead ramips: rt305x: fix mac addresses on the Netcore NW718 board 
SVN-Revision: 28006
 2011-08-15 18:55:53 +00:00
Gabor Juhos 17c041cd0b ramips: add maccalc to the default package list 
SVN-Revision: 28005
 2011-08-15 18:55:52 +00:00
Gabor Juhos 67e480971c ramips: add input drivers to the default package list 
SVN-Revision: 28003
 2011-08-15 18:55:50 +00:00
Gabor Juhos 35ecf12059 ramips: rt305x: make config and factory partitions read-only on the ATP-52B 
SVN-Revision: 28002
 2011-08-15 18:55:48 +00:00
Gabor Juhos 75e2360ab3 ramips: add uci-defaults scripts to preconfigure USB LEDs 
SVN-Revision: 28000
 2011-08-15 14:12:00 +00:00
Gabor Juhos e1b176de82 ramips: rt305x: add some USB modules to the default profile 
SVN-Revision: 27999
 2011-08-15 14:11:58 +00:00
Gabor Juhos 169d68c98c ramips: rt305x: add dwc_otg driver 
Based on a patch by Layne Edwards <ledwards@astrumtech.net>

SVN-Revision: 27997
 2011-08-15 14:11:55 +00:00
Gabor Juhos 0ca16a4600 ramips: rt305x: register the dwc_otg device on the relevant boards 
SVN-Revision: 27996
 2011-08-15 14:11:52 +00:00
Gabor Juhos addc86fdbd ramips: rt305x: add dwc_otg platform device 
Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>

SVN-Revision: 27995
 2011-08-15 14:11:51 +00:00
Gabor Juhos 6ef87ff5e6 ramips: sync kernel config 
SVN-Revision: 27993
 2011-08-15 14:11:48 +00:00
Gabor Juhos 4ee4fc9725 ramips: load the input drivers during preinit 
SVN-Revision: 27992
 2011-08-15 14:11:47 +00:00
Gabor Juhos a3c7e71ae1 ramips: add support for Argus ATP-52B 
[The ESW related changes has been removed - juhosg]

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 27991
 2011-08-15 14:11:45 +00:00
Gabor Juhos 1ebcf03789 ramips: allow to specify port layout for the switch of the RT305x/RT3350 
Based on a patch by Roman Yeryomin <roman@advem.lv>

SVN-Revision: 27990
 2011-08-15 14:11:43 +00:00
Gabor Juhos bb64fb2e58 generic: ar8216: add support for get link status 
SVN-Revision: 27989
 2011-08-15 14:11:41 +00:00
Felix Fietkau 50817f6afe kernel: disable cfi cmdset 0002 erase suspend 
on some platforms, erase suspend leads to data corruption and lockups when write
ops collide with erase ops. this has been observed on the buffalo wzr-hp-g300nh.
rather than play whack-a-mole with a hard to reproduce issue on a variety of devices,
simply disable erase suspend, as it will usually not produce any useful gain on
the small filesystems used on embedded hardware.

SVN-Revision: 27984
 2011-08-15 00:15:36 +00:00
Felix Fietkau 12c84f8eeb ar71xx: add some code to detect DMA stuck conditions on ar7240 
SVN-Revision: 27975
 2011-08-13 22:30:14 +00:00
Felix Fietkau 85ccc74e1b ar71xx: on ar724x only reset the link status in the restart handler, the fast reset takes care of DMA stuck issues 
SVN-Revision: 27973
 2011-08-13 21:49:46 +00:00
Hauke Mehrtens 77218b0338 brcm47xx: fix flash detection on chipcommon less devices. 
This closes #9906
Thank you for the report Kim

SVN-Revision: 27967
 2011-08-12 16:37:22 +00:00
Felix Fietkau 82a05d1a19 initramfs: allow preinit to enable switching from initramfs to tmpfs to allow overlayfs to be mounted on top of it 
SVN-Revision: 27960
 2011-08-11 20:32:57 +00:00
Felix Fietkau d26bb6c59c ar71xx: adjust the mtd layout of tew-632brp and dir-615c to match the image layout (fixes #9922) 
SVN-Revision: 27959
 2011-08-11 13:52:40 +00:00
Florian Fainelli ce2ced7311 package more board specific modules: 
- keyboard matrix driver
- SoC sound support

based on patch by KanjiMonster

SVN-Revision: 27957
 2011-08-11 11:18:44 +00:00
Florian Fainelli f7dbf2ef04 add more missing touchscren symbols (3.0+) 
SVN-Revision: 27956
 2011-08-11 11:18:41 +00:00
Florian Fainelli 11b1f687d4 disable hardware perf support to work in qemu 
SVN-Revision: 27955
 2011-08-11 11:18:37 +00:00
Hauke Mehrtens 20de21593b kernel: revert r27953 
KanjiMonster did the right patch, I was just confused because of linux-3.0 and linux-2.6.30

SVN-Revision: 27954
 2011-08-11 09:54:02 +00:00
Hauke Mehrtens 409f8211e1 kernel: fix ocf patch for kernel 2.6.30 
find_task_by_vpid is already exported by the kernel without any patches needed.

SVN-Revision: 27953
 2011-08-11 09:47:36 +00:00
Jonas Gorski 7304dcad2a kernel: 2.6.30: remove bogus additional find_task_by_vpid export from OCF 
find_task_by_vpid is already exported, thus breaking builds.

SVN-Revision: 27952
 2011-08-11 09:46:30 +00:00
Jonas Gorski def60e2918 ar71xx: make ehci patch apply again 
SVN-Revision: 27951
 2011-08-10 23:02:56 +00:00
Felix Fietkau 9e5ead9a51 ar71xx: fix a copy&paste bug that broke wzr-hp-g300nh and wzr-hp-ag300h images (#9918) 
SVN-Revision: 27950
 2011-08-10 22:24:56 +00:00
Florian Fainelli b59ab7d13b fix ehci build on 3.0+ 
SVN-Revision: 27946
 2011-08-10 11:37:25 +00:00
Florian Fainelli 0e40c19b45 add ignore_oc in struct ehci_hcd 
SVN-Revision: 27945
 2011-08-10 11:37:21 +00:00
Florian Fainelli 458716389c update to 3.0.1 
SVN-Revision: 27943
 2011-08-09 13:13:22 +00:00
Florian Fainelli f124358722 add CONFIG_EARLY_PRINTK 
SVN-Revision: 27942
 2011-08-09 13:13:16 +00:00
Jonas Gorski 6b5f483efa bcm63xx: add support for linux 3.1-rc1 
SVN-Revision: 27941
 2011-08-09 12:19:49 +00:00
Jonas Gorski cf2070bd5b linux: generic: add support for 3.1-rc1 
SVN-Revision: 27940
 2011-08-09 12:19:43 +00:00
Daniel Dickinson 7ef004a144 Add packages that will be relant as "There's a new Alix platform driver hitting linux-next upstream. Get ready for it in 2.6.39.4 and 3.0. 
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>"

SVN-Revision: 27929
 2011-08-08 02:33:18 +00:00
Felix Fietkau ba9e7889dd kernel: fix another typo in the netfilter optimization patches 
SVN-Revision: 27927
 2011-08-07 21:17:18 +00:00
Hauke Mehrtens 6f4151b7f0 kernel: add missing option 
SVN-Revision: 27925
 2011-08-06 16:46:04 +00:00
Felix Fietkau ac96ae6731 kernel: add missing checks in the netfilter optimization patch which broke some rules containing only source/destination address checks 
SVN-Revision: 27923
 2011-08-06 12:39:31 +00:00
Hauke Mehrtens a1d5ad7655 uml: add some missing options 
SVN-Revision: 27921
 2011-08-06 11:23:45 +00:00
Hauke Mehrtens d447cb5164 kernel: add some missing config options 
These options where found by buildbot

SVN-Revision: 27920
 2011-08-06 10:41:15 +00:00
Hauke Mehrtens 51be984655 kernel: update to kernel version 3.0.1 
SVN-Revision: 27918
 2011-08-06 09:51:55 +00:00
Florian Fainelli 55e020cd14 update to kernel 3.0 
SVN-Revision: 27912
 2011-08-05 13:48:42 +00:00
Florian Fainelli 698c1b4952 add more missing config symbols 
SVN-Revision: 27911
 2011-08-05 13:48:38 +00:00
Florian Fainelli 48af2495b4 update to kernel 3.0 
SVN-Revision: 27910
 2011-08-05 13:48:35 +00:00
Florian Fainelli a8e79cbdf8 add 101-perf_arm_uclibc.patch to 3.0 patches 
SVN-Revision: 27909
 2011-08-05 13:48:31 +00:00
Florian Fainelli c99d08f050 add missing config symbol 
SVN-Revision: 27908
 2011-08-05 13:48:28 +00:00
Gabor Juhos 7e5a1bc1d0 ar71xx: fix image generation 
SVN-Revision: 27907
 2011-08-05 10:31:52 +00:00
Hauke Mehrtens 77966b81d8 brcm47xx: use kernel 3.0 
As this target changes often these days it is hard to support more kernel versions. Now only kernel 3.0 is supported.

SVN-Revision: 27906
 2011-08-04 20:10:24 +00:00
Hauke Mehrtens 8428ebd8e8 brcm47xx: update patches 
* this adds sflash support for ssb devices
* the flash is now a platform device
* minor updates

SVN-Revision: 27902
 2011-08-04 20:04:54 +00:00
Gabor Juhos 85b858fae6 ar71xx: enable sysupgrade on the AP96 and DB120 boards 
SVN-Revision: 27901
 2011-08-04 19:41:18 +00:00
Gabor Juhos fb77134596 ar71xx: use the same test for AP121 and Zcomax sysupgrade images 
SVN-Revision: 27900
 2011-08-04 19:41:17 +00:00
Gabor Juhos fd3a5f64f2 ar71xx: cleanup image generation Makefile 
SVN-Revision: 27899
 2011-08-04 19:41:16 +00:00
Felix Fietkau 4b75394056 ar71xx: fix ethernet FIFO state corruption on ar7240 
When starting/stopping DMA sometimes the FIFO state gets corrupted,
leading to wildly fluctuating latencies or packet data corruption.
Fix this by issuing a fast MAC reset as soon as the link is detected
as up. Fixes #9689, #9405

SVN-Revision: 27896
 2011-08-04 17:36:31 +00:00
Felix Fietkau d2aeca6b6d ag71xx: fix memory corruption issues on ar7240 on ethernet start/stop 
When the DMA engine state gets corrupted due to a hardware issues, it
often won't stop rx until a full reset is issued. In that case the hardware
must keep a valid descriptor, otherwise it will write to random places in
system RAM, triggering random crashes. To fix this, keep a dummy descriptor
without a buffer that keeps the DMA engine in a sane state until the reset
is done

SVN-Revision: 27895
 2011-08-04 17:36:27 +00:00
Felix Fietkau 500c3a1475 ar71xx: fix MAC/MDIO reset mask handling 
SVN-Revision: 27894
 2011-08-04 17:36:23 +00:00
Jonas Gorski 3b36e83a29 generic: Add missing config symbol 
SVN-Revision: 27887
 2011-08-03 23:28:00 +00:00
Florian Fainelli 4543f6d659 remove 8*1-usb_serial_endpoint_size.patch 
This is breaking some devices out there such as Winchiphead CH341 adapters (#9601)

SVN-Revision: 27885
 2011-08-03 13:23:21 +00:00
Florian Fainelli c37a9544bf add support for BCM6345 Ethernet DMA engine 
SVN-Revision: 27881
 2011-08-02 18:55:55 +00:00
Florian Fainelli 11c4128770 improve BCM6345 support 
- runtime detect the amount of memory available
- define EBI_BASE as MPI_BASE to get rid of chip-select specific hacks
- fix GPIO control

SVN-Revision: 27880
 2011-08-02 18:55:46 +00:00
Florian Fainelli c4af036ec7 refresh 3.0 patches 
SVN-Revision: 27879
 2011-08-02 18:55:38 +00:00
Felix Fietkau 54d97e6782 ar71xx: add some hacks to work around the misalignment in IP packets received on AR71xx and AR91xx ethernet MACs decreases CPU load with the default firewall for routing 95 mbit/s from 78% to 55% 
SVN-Revision: 27878
 2011-08-02 15:12:08 +00:00
Florian Fainelli a0ce3668a6 fix r6040 multicast patch, thanks nicolas le falher 
SVN-Revision: 27876
 2011-08-02 14:13:00 +00:00
Jonas Gorski ed2b7cd342 linux/generic: remove obsolete kernel options from 3.0 
Also fix one typo.

SVN-Revision: 27875
 2011-08-02 09:58:16 +00:00
Jonas Gorski 61e2e03311 kernel: Fix firewire for 2.6.37+ 
The old ieee1394 stack was removed in 2.6.37. The new firewire stack is
available for all kernel versions, but experimental for the older one, so
make both available where appropriate.

SVN-Revision: 27874
 2011-08-02 09:53:19 +00:00
Felix Fietkau 62b8cba9c0 kernel: enable inotify by default (#8055) 
SVN-Revision: 27853
 2011-07-31 18:12:23 +00:00
Felix Fietkau 19eaf1c5f7 kernel: add a new version of my netfilter speedup patches for linux 2.6.39 and 3.0 
SVN-Revision: 27840
 2011-07-30 15:39:52 +00:00
Imre Kaloz e4b6839fd3 upgrade to 3.0 (magicbox ata and openrb usb is broken, but the current kernel didn't compile at all, so...) 
SVN-Revision: 27826
 2011-07-29 10:16:48 +00:00
Jonas Gorski e18ceb1dac ar71xx: merge WZR-HP-G301NH support into WZR-HP-G300NH 
Now that we can use a generic name for the switch there is no need for a
separate image for the WZR-HP-G301NH.
Update the default network config and remove the extra image.

SVN-Revision: 27814
 2011-07-28 11:57:51 +00:00
Gabor Juhos ea211c4d90 ramips: rt305x: add support for the Netcore NW718 board 
SVN-Revision: 27813
 2011-07-28 10:56:32 +00:00
Gabor Juhos 437e184484 ramips: rt305x: add support for the Asus RT-G32 B1 board 
Based on a patch by: Sergiy <piratfm@gmail.com>

SVN-Revision: 27812
 2011-07-28 10:56:30 +00:00
Gabor Juhos 7193f29d96 ramips: rt305x: enable M25P80 driver 
Based on a patch by Sergiy <piratfm@gmail.com>

SVN-Revision: 27811
 2011-07-28 10:56:28 +00:00
Gabor Juhos c6db514de8 ramips: rt305x: introduce rt305x_register_spi helper 
Based on a patch by Sergiy <piratfm@gmail.com>

SVN-Revision: 27810
 2011-07-28 10:56:27 +00:00
Gabor Juhos 57122e7ccc ramips: add SPI controller driver 
Based on a patch by Sergiy <piratfm@gmail.com>

SVN-Revision: 27809
 2011-07-28 10:56:25 +00:00
Gabor Juhos 3f986df05f ramips: rt305x: add support for the DIR-600 B1,B2 boards 
SVN-Revision: 27808
 2011-07-28 10:56:24 +00:00
Gabor Juhos 857c1028ac ramips: rt305x: change machine id for DIR-300 
SVN-Revision: 27807
 2011-07-28 10:56:22 +00:00
Gabor Juhos 42d3a55347 ramips: rt305x: rename LEDs on the DIR-300-B1 
SVN-Revision: 27806
 2011-07-28 10:56:21 +00:00
Gabor Juhos 39689b648f ramips: rt305x: sort Kconfig/Makefile entries 
SVN-Revision: 27805
 2011-07-28 10:56:19 +00:00
Gabor Juhos 32c0534516 ramips: rt305x: fix uci-defaults/network script for the RT3350 based boards 
This change corrects expected CPU name of Ralink RT3050, which
describes itself as RT3350 (this name is ripped off chip and elevated
to user space via /proc/cpuinfo.)
This patch fixes wired network on DIR-300 rev B and DIR-600 rev B

Signed-off-by: Slawomir Cygan <wiewior@wiewior.eu.org>

SVN-Revision: 27804
 2011-07-28 10:56:18 +00:00
Gabor Juhos 57663ce25b ramips: fix PWH2004 image generation 
SVN-Revision: 27803
 2011-07-28 10:56:15 +00:00
Jonas Gorski eaa935658b swconfig: Add generic switch identifiers 
Also make switches available under a generic name "switch<num>" for device
name agnostic access. The old device name is used as an alias for backward
compatibility.

SVN-Revision: 27800
 2011-07-27 18:00:18 +00:00
Felix Fietkau 4da138d899 x86/alix2: include WAN interface by default 
Include WAN interface by default, instead of putting both ports in the LAN bridge.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 27787
 2011-07-26 16:37:48 +00:00
Felix Fietkau 41db64f8e0 x86/alix2: fix typo in target makefile 
Cut and paste cruft from borrowing from Geos platform.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 27786
 2011-07-26 16:37:44 +00:00
Hauke Mehrtens 80956276a7 x86: add missing config symbols 
This adds some config symbols for kernel 3.0.

Thank you realopty for the patch.

This is from #9719.

SVN-Revision: 27775
 2011-07-25 21:21:01 +00:00
Jonas Gorski 4e6c93bef1 bcm63xx: Fix SPI commands and register offsets for BCM6348 
In 240-spi.patch, spi registers for bcm6348 were all messed up. This patch fixes that.
It also fixes some spi commands for all bcm63xx.

Signed-off-by: Anthony Blakemore <stokie-ant@raverbaby.co.uk>

SVN-Revision: 27774
 2011-07-25 19:52:47 +00:00
Imre Kaloz f0f10fa599 add missing symbols for generic and x86 on 3.0, based on Philip Prindeville's patch 
SVN-Revision: 27762
 2011-07-24 22:04:08 +00:00
Jo-Philipp Wich f66871e836 From: George Kashperko <george@znau.edu.ua> Issue map read after Write Buffer Load command to ensure chip is ready to receive data. Signed-off-by: George Kashperko <george@znau.edu.ua> 
SVN-Revision: 27760
 2011-07-24 15:37:00 +00:00
Jo-Philipp Wich 6eb9e39bc4 refresh 501-yaffs_cvs_2009_04_24.patch for Linux 3.0 final 
SVN-Revision: 27759
 2011-07-24 15:36:33 +00:00
Hauke Mehrtens 4815eaa4c3 brcm47xx: run ssb_pcicore_fix_sprom_core_index just for ssb bus on pci 
ssb_pcicore_fix_sprom_core_index accesses the sprom on the pci bus but
this causes a data bus error (oops) on a SoC.

SVN-Revision: 27758
 2011-07-24 15:18:29 +00:00
Felix Fietkau 9e4113b493 ar71xx: autodetect rtl8366s/rtl8366rb on wzr-hp-g300nh 
SVN-Revision: 27756
 2011-07-24 14:40:35 +00:00
Felix Fietkau 5b32d62fcf rtl8366_smi: implement a function for detecting whether the attached switch is RTL8366S or RTL8366RB 
SVN-Revision: 27755
 2011-07-24 14:40:31 +00:00
Felix Fietkau 1afe8a0726 rtl8366: unify rtl8366s and rtl8366rb platform data 
SVN-Revision: 27754
 2011-07-24 14:40:23 +00:00
Hauke Mehrtens 00dd85d8f6 ocf-linux: version bump to 20110720 
Fixes problem with TFM allocation in cryptosoft.c

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

Hauke:
 * remove ubsec_ssb package and take it from ocf-linux
 * use patches from ocf-linux package
 * refresh all patches
 * readd some build fixes for OpenWrt.
 * readd CRYPTO_MANAGER dependency

SVN-Revision: 27753
 2011-07-24 14:17:58 +00:00
Felix Fietkau b5e3f6cd81 x86: 2.6.39 requires additional symbol 
Sysfs support for DMI BIOS was added in 2.6.39.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 27749
 2011-07-24 09:41:07 +00:00
Felix Fietkau a6f7e72cf7 atheros: fix mii phy read/write ioctl 
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

SVN-Revision: 27747
 2011-07-24 09:11:10 +00:00
Felix Fietkau 6d3bddb056 geos: include pppstats and pppdump in default packaging 
As the Geos box includes an ADSL modem that's targeted towards PPPoE, PPPoA, and bridged utilization, including these useful tools allows for easier configuration and troubleshooting.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 27743
 2011-07-24 08:41:58 +00:00
Felix Fietkau 9105dad418 ar71xx: enable the usb power regulator on the wzr-hp-ag300h through gpio 2 (#9684) 
SVN-Revision: 27739
 2011-07-24 08:02:20 +00:00
Imre Kaloz 193845ce7a upgrade to 3.0 
SVN-Revision: 27738
 2011-07-23 20:44:08 +00:00
Imre Kaloz 5e29e14795 upgrade to 3.0 
SVN-Revision: 27737
 2011-07-23 20:43:53 +00:00
Imre Kaloz 0cb1b5d775 3.0 is out 
SVN-Revision: 27736
 2011-07-23 20:42:58 +00:00
Hauke Mehrtens 49f4d4217e brcm47xx: build bcma into the kernel 
Now we can assume that every brcm47xx kernel has the bcma module build
into the kernel. This is not needed for this version as this does not
support bcma as system bus but kernel 3.0 will.

SVN-Revision: 27733
 2011-07-23 11:19:58 +00:00
Hauke Mehrtens 5169b72c8a kernel: update bcma and ssb to version master-2011-07-22 from wireless-testing 
SVN-Revision: 27731
 2011-07-23 11:17:00 +00:00
Hauke Mehrtens b07b5fc7b6 brcm47xx: remove old kernel versions 
SVN-Revision: 27724
 2011-07-22 18:41:24 +00:00
Hauke Mehrtens b988168906 brcm47xx: update bcma and ssb to master-2011-07-21 
* add new patches for bcm4716 SoC
* add support for serial flash on bcma bus

SVN-Revision: 27723
 2011-07-22 16:30:42 +00:00
Hauke Mehrtens 39f491e479 kernel: update to linux-3.0 and refresh patches. 
Thank you Peter Wagner for the patch

SVN-Revision: 27722
 2011-07-22 16:04:25 +00:00
Felix Fietkau c7173a211d ar71xx: reinitialize global switch settings after reset on ar7240 
SVN-Revision: 27705
 2011-07-20 14:39:47 +00:00
Felix Fietkau ca473833c4 ar71xx: configure address aging on ar7240 
SVN-Revision: 27704
 2011-07-20 14:39:42 +00:00
Felix Fietkau fefc79f3cb ar71xx: reset the phy in the ethernet init on ar724x 
SVN-Revision: 27703
 2011-07-20 12:04:34 +00:00
Felix Fietkau 005fe5d1fd ar71xx: make sure that rx and interrupts are disabled before issuing the hardware reset 
SVN-Revision: 27702
 2011-07-20 12:04:29 +00:00
Felix Fietkau e7ab000008 ar71xx: increase the delay after the ethernet MAC reset 
SVN-Revision: 27701
 2011-07-20 12:04:25 +00:00
Felix Fietkau 255dcaa3a6 ar71xx: fix an unused variable warning 
SVN-Revision: 27700
 2011-07-20 12:04:20 +00:00
John Crispin 8acc276692 sync default kernel config for lantiq danube/ar9 
SVN-Revision: 27697
 2011-07-19 18:08:09 +00:00
John Crispin 500d7d4bc8 fix etehrnet when using EPHY on lantiq ASE 
SVN-Revision: 27696
 2011-07-19 18:06:52 +00:00
John Crispin 78a9b1a2ad fixes pci on lantiq AR9 SoC 
SVN-Revision: 27695
 2011-07-19 18:06:42 +00:00
John Crispin 3833b7be24 add support for more lantiq AR9 boards 
SVN-Revision: 27694
 2011-07-19 18:06:33 +00:00
Felix Fietkau fee32761f3 kernel: backport and enable tmpfs xattr support for 2.6.39 
SVN-Revision: 27691
 2011-07-19 09:00:55 +00:00
John Crispin 6b8c119b41 * fix external interrupts 
SVN-Revision: 27687
 2011-07-18 16:27:11 +00:00
John Crispin 5906377332 * add gigasx76x update 
* rebase patches
* add arv752DPW arv7525PD
* fixes gpio_keys

Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 27665
 2011-07-17 19:27:44 +00:00
Florian Fainelli 3994a2d1f9 add additionnal debug symbols when kernel debugging is enabled 
SVN-Revision: 27637
 2011-07-17 12:30:04 +00:00
Florian Fainelli 9c7294f7c7 add ehci support to DWV-S0 board (#9059) 
SVN-Revision: 27622
 2011-07-16 08:39:04 +00:00
Florian Fainelli 930485561c fix GEN_SPI_RSET_BASE macro (#9697) 
SVN-Revision: 27604
 2011-07-13 09:33:11 +00:00
Imre Kaloz ab5fd3c1cb upgrade to 3.0-rc7 
SVN-Revision: 27600
 2011-07-12 13:44:16 +00:00
Imre Kaloz 0321740a62 upgrade to 3.0-rc6 and optimize for armv5te again 
SVN-Revision: 27592
 2011-07-11 20:35:16 +00:00
Felix Fietkau f3d693c0ee ar71xx: do not reset the hardware on transmit timeout - this would mess up the up the PHY state 
SVN-Revision: 27568
 2011-07-09 06:30:13 +00:00
Felix Fietkau 2806c75c07 ag71xx: keep the rx engine stopped while the link is not up, should hopefully fix stability issues from #9405 
SVN-Revision: 27567
 2011-07-09 06:29:46 +00:00
Imre Kaloz 8788b97e65 use the new upstream l2cache and wdt code, smaller changes, refresh patches 
SVN-Revision: 27558
 2011-07-08 09:41:07 +00:00
Imre Kaloz b3b0f0e49a add mpcore_wdt fixes 
SVN-Revision: 27557
 2011-07-08 09:33:13 +00:00
John Crispin 7f548d379f fix generation of falcon images for profiles 
SVN-Revision: 27550
 2011-07-07 20:20:51 +00:00
John Crispin d7732885ed adds 2 ASC related patches to lantiq 
Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>

SVN-Revision: 27549
 2011-07-07 20:20:46 +00:00
John Crispin b75a8fb532 fix up falcon kernel config 
SVN-Revision: 27542
 2011-07-07 18:20:56 +00:00
John Crispin 036df9f088 fix i2c-falcon kmod package selection 
SVN-Revision: 27541
 2011-07-07 18:20:51 +00:00
John Crispin a463daa818 replace all references to xway with danube 
SVN-Revision: 27538
 2011-07-07 18:20:37 +00:00
John Crispin dc2af33083 fix lantiq image makefile to represent new split between ar9 and danube 
SVN-Revision: 27537
 2011-07-07 18:20:31 +00:00
John Crispin 3c1079a7a7 add ar9 specific profile 
SVN-Revision: 27536
 2011-07-07 18:20:27 +00:00
John Crispin 09d547eae4 rename xway profile to danube and remove ar9 specifics 
SVN-Revision: 27535
 2011-07-07 18:20:21 +00:00
John Crispin f177052c9d remove ar9 board from xway profiles 
SVN-Revision: 27534
 2011-07-07 18:20:16 +00:00
John Crispin dc69e5f2e3 remove CONFIG_MTD_PARTITIONS references from lantiq 3.0 patches 
SVN-Revision: 27532
 2011-07-07 18:20:07 +00:00
Imre Kaloz 79fa6c693a refresh patches 
SVN-Revision: 27528
 2011-07-07 17:18:50 +00:00
Imre Kaloz b8227050fb refresh patches 
SVN-Revision: 27527
 2011-07-07 17:18:06 +00:00
Imre Kaloz 92981b6bb3 enable smp support 
SVN-Revision: 27526
 2011-07-07 17:17:44 +00:00
Imre Kaloz 94055a90a7 make smp code more similar to upstream 
SVN-Revision: 27525
 2011-07-07 17:17:06 +00:00
Imre Kaloz 42df203852 3.0 is at rc6 now 
SVN-Revision: 27524
 2011-07-07 13:30:41 +00:00
Gabor Juhos 5ad4040c49 ar71xx: build image for the AP121 boards with 4M of flash 
SVN-Revision: 27523
 2011-07-07 13:01:50 +00:00
Gabor Juhos cdcb10ee42 ar71xx: add separate profiles for the AP121 and AP121-MINI boards 
SVN-Revision: 27522
 2011-07-07 13:01:48 +00:00
Imre Kaloz b15f8f765a add support for and switch to XZ compressed kernels on ARM 
SVN-Revision: 27518
 2011-07-07 10:26:16 +00:00
Imre Kaloz d148dcce05 select the right cpu 
SVN-Revision: 27517
 2011-07-07 10:24:37 +00:00
Florian Fainelli a3e343b722 fix building of perf for arm on uclibc 
SVN-Revision: 27514
 2011-07-07 09:43:00 +00:00
Florian Fainelli a4d69536ea enable support for perf events 
SVN-Revision: 27512
 2011-07-07 09:42:53 +00:00
Florian Fainelli 0cb42cf9a4 enable perf counter support 
SVN-Revision: 27511
 2011-07-07 09:42:50 +00:00
Daniel Dickinson 0d8b0e937d base-files: diag.sh: added failsafe led definition 
SVN-Revision: 27502
 2011-07-07 03:09:20 +00:00
John Crispin a674aabe54 get ready for 3.0 
SVN-Revision: 27496
 2011-07-06 17:27:17 +00:00
Gabor Juhos abb1ca01a7 ramips: fix buffalo image generation 
SVN-Revision: 27495
 2011-07-06 16:46:33 +00:00
Imre Kaloz a832965eff add 3.0 support 
SVN-Revision: 27493
 2011-07-06 13:03:38 +00:00
Imre Kaloz a00596924b refresh patches 
SVN-Revision: 27492
 2011-07-06 12:57:51 +00:00
Imre Kaloz 90bd74dd8b fixup mtd refresh and co. 
SVN-Revision: 27491
 2011-07-06 12:55:21 +00:00
Imre Kaloz f24764a372 fix myloader patch, thanks KanjiMonster 
SVN-Revision: 27490
 2011-07-06 12:48:17 +00:00
John Crispin d42f0c9a1b fixes mtd maps for lantiq easy50712 and easy50601 evalkit. without this patch mini_fo/jffs caused the uboot to be overwritten on firstboot 
SVN-Revision: 27489
 2011-07-06 10:36:56 +00:00
Imre Kaloz c93b5653bc we have an up-to-date mach-type file now 
SVN-Revision: 27486
 2011-07-06 10:12:50 +00:00
Imre Kaloz 05790d9cba replace the cut down machtype with the full one, as we support a lot of not-yet-upstreamed stuff 
SVN-Revision: 27485
 2011-07-06 10:09:15 +00:00
Florian Fainelli 00ad56b73e move board_HW553 inside the ifdef ..BCM6358 .. endif block 
SVN-Revision: 27484
 2011-07-06 10:00:39 +00:00
Florian Fainelli 965567a320 refresh 2.6.39 geode patches 
SVN-Revision: 27483
 2011-07-06 10:00:05 +00:00
Gabor Juhos 1a4e7153b6 ramips: add diag support for RT-N15 and PWH2004 
Also sort the board names alphabetically.

SVN-Revision: 27478
 2011-07-06 08:05:00 +00:00
Gabor Juhos d6985f5b46 ramips: use the 'router' LED for diagnostic on the WHR-G300N board 
SVN-Revision: 27477
 2011-07-06 08:04:55 +00:00
Gabor Juhos 2cc346b8e0 ramips: create tftp image for the WHR-G300N board 
SVN-Revision: 27476
 2011-07-06 08:04:54 +00:00
Gabor Juhos 0dc18d8586 ramips: create factory image for the WHR-G300N board 
SVN-Revision: 27474
 2011-07-06 08:04:52 +00:00
Daniel Dickinson 1141165bb9 Makefile: fixed inclusion of kmod-leds-gpio as a module (breaks Image Generator) - the module is built into the kernel. 
SVN-Revision: 27471
 2011-07-06 06:35:24 +00:00
Daniel Dickinson 9dc72505a2 profiles: GW6X00: fixed inclusion of both wl and wlc wireless tools...should be just wlc 
SVN-Revision: 27470
 2011-07-06 06:35:22 +00:00
Imre Kaloz 612a1fcbc4 add some symbols 
SVN-Revision: 27464
 2011-07-05 21:19:57 +00:00
Florian Fainelli d24fc7ef56 sched_connmark depends on NF_CONNTRACK_MARK (#8976, #9423) 
SVN-Revision: 27457
 2011-07-05 12:40:50 +00:00
Imre Kaloz c52560302d add missing symbols 
SVN-Revision: 27454
 2011-07-05 11:55:31 +00:00
Florian Fainelli 7c3bbe150a hw553: fix missing has_uart0 in board definition (#9533) 
SVN-Revision: 27448
 2011-07-04 15:04:58 +00:00
Gabor Juhos 89f6b29feb ar71xx: fix building of squashfs images 
SVN-Revision: 27446
 2011-07-04 12:10:03 +00:00
John Crispin 29653782a9 set DEFAULT_SUBTARGET for lantiq/ 
SVN-Revision: 27445
 2011-07-04 11:21:47 +00:00
John Crispin 04fefa4a28 fix broken falcon patches from last night 
SVN-Revision: 27441
 2011-07-04 07:50:34 +00:00
Gabor Juhos e9c8218375 ramips: create factory image for DIR-300-B1 
SVN-Revision: 27439
 2011-07-04 06:48:45 +00:00
Felix Fietkau 7afed2d86c ar71xx: add wzr-hp-ag300h sysupgrade support (patch from #9650) 
SVN-Revision: 27434
 2011-07-04 03:03:34 +00:00
John Crispin cd8166f3fd AT91: flexibity: add system uci file 
SVN-Revision: 27413
 2011-07-03 18:55:57 +00:00
John Crispin 349e97f879 AT91: Add flexibity board support 
The patch below adds AT91 Flexibity Connect board support.

Signed-off-by: Maxim Osipov <maxim.osipov@gmail.com>

SVN-Revision: 27412
 2011-07-03 18:51:59 +00:00
John Crispin 2975f0aaf1 alix2: add/subtract features as needed 
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 27411
 2011-07-03 17:39:24 +00:00
John Crispin 0a8430bfab use netif_receive_skb on lantiq 
Signed-off-by: Luca Olivetti <luca@ventoso.org>

SVN-Revision: 27410
 2011-07-03 17:39:05 +00:00
John Crispin 058eca0b3b automatic subtarget enumaration 
SVN-Revision: 27407
 2011-07-03 17:38:23 +00:00
John Crispin 43771202d3 update lantiq/falcon patches 
SVN-Revision: 27406
 2011-07-03 17:38:11 +00:00
John Crispin d43cbe24a5 fix description for lantiq target 
SVN-Revision: 27405
 2011-07-03 17:37:57 +00:00
Gabor Juhos 6e7b802297 ramips: merge 2.6.39 patches 
SVN-Revision: 27399
 2011-07-03 15:02:10 +00:00
Gabor Juhos 646f64d389 ramips: remove 2.6.37 stuff 
SVN-Revision: 27398
 2011-07-03 15:02:09 +00:00
Gabor Juhos 2fc6be00f4 ramips: switch to 2.6.39.2 
SVN-Revision: 27397
 2011-07-03 15:02:07 +00:00
Gabor Juhos 0fde070cf9 ramips: add 2.6.39 support 
Based on the patches from #9625

SVN-Revision: 27396
 2011-07-03 15:02:06 +00:00
Gabor Juhos c8010517d5 ramips: add hotplug script to extract eeprom for the rt2x00 driver 
SVN-Revision: 27393
 2011-07-03 15:02:01 +00:00
Gabor Juhos 3334d0604e ramips: specify eeprom file name on RT305X 
SVN-Revision: 27392
 2011-07-03 15:02:00 +00:00
Gabor Juhos f53cc4c439 ramips: specify eeprom file name on RT288X 
SVN-Revision: 27391
 2011-07-03 15:01:59 +00:00
Gabor Juhos 129217e127 generic: add rt2x00_platform.h 
SVN-Revision: 27390
 2011-07-03 15:01:57 +00:00
Gabor Juhos 521e495f4b ramips: add all supported boards to lib/ramips.sh 
SVN-Revision: 27389
 2011-07-03 15:01:56 +00:00
Gabor Juhos 6f54df889a ramips: check the size of the uImage in image generation 
SVN-Revision: 27388
 2011-07-03 15:01:55 +00:00
Gabor Juhos 575a5286c8 ramips: use lowercase partiion names on the WCR150GN board 
SVN-Revision: 27387
 2011-07-03 15:01:53 +00:00
Gabor Juhos 31facf0b75 ramips: use different partition names in the DIR-300-B1 image 
SVN-Revision: 27386
 2011-07-03 15:01:52 +00:00
Gabor Juhos dbe55f08f0 ramips: force word write on flashes with AMD cmdset (#9252) 
SVN-Revision: 27385
 2011-07-03 15:01:51 +00:00
Gabor Juhos f1cf43d468 ramips: update partition map for DIR-300-B1 
Patch by Layne Edwards from #9252.

SVN-Revision: 27384
 2011-07-03 15:01:49 +00:00
Gabor Juhos 641c87b127 ramips: consistently use 'firmware' name for sysupgrade partitions 
SVN-Revision: 27383
 2011-07-03 15:01:48 +00:00
Gabor Juhos 381d7f05af ramips: fix a section mismatch warning 
SVN-Revision: 27382
 2011-07-03 15:01:46 +00:00
Gabor Juhos 16ad91d69f ramips: remove unused include from the common GPIO code 
SVN-Revision: 27381
 2011-07-03 15:01:44 +00:00
Gabor Juhos c9f3e7082f ramips: disable watchdog on sysupgrade 
SVN-Revision: 27380
 2011-07-03 15:01:43 +00:00
Gabor Juhos e70e6f6848 ramips: swap target check in image generation 
SVN-Revision: 27379
 2011-07-03 15:01:42 +00:00
Gabor Juhos affb57ee27 ramips: update HW550-3G mtd partitions 
This patch updates the mtd partitions for the Aztech HW550-3G

Signed-off-by: Layne Edwards <ledwards@astrumtech.net>

SVN-Revision: 27378
 2011-07-03 15:01:41 +00:00
Gabor Juhos 3099ffe414 ramips: set cp0_perfcount_irq for RT305X 
SVN-Revision: 27377
 2011-07-03 15:01:40 +00:00
Daniel Dickinson f9f3ddebe8 target/patches: This has been sent upstream, but might not appear for a couple of weeks. 
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 27373
 2011-07-03 03:20:04 +00:00
Daniel Dickinson b0cc0067f9 target/patches: Like the earlier mfgpt patch, the new GPIO drivers also require the MFD driver to be present for the BAR's to be mapped. 
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 27371
 2011-07-03 03:14:53 +00:00
Daniel Dickinson f2d749ee15 Revert "Like the earlier mfgpt patch, the new GPIO drivers also require the MFD driver to be present for the BAR's to be mapped." 
This reverts commit c485487b63d1c1de72a375f1278d8a98546ba3af.

SVN-Revision: 27370
 2011-07-03 03:14:51 +00:00
Daniel Dickinson 209a776f22 Like the earlier mfgpt patch, the new GPIO drivers also require the MFD driver to be present for the BAR's to be mapped. 
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 27369
 2011-07-03 03:14:48 +00:00
Daniel Dickinson 88dcf8629d The Geode CS5535 and CS5536 companion chips are backward compatible with the SCx200 I2C drivers. 
Include this on Geos.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 27368
 2011-07-03 02:59:00 +00:00
Gabor Juhos b3a89652a5 ar71xx: use 4k image only for the AP121 board 
Create optimized 64K images with the new padjffs2 tool and use that
images instead of the 4k ones. The 4k images causes problems on devices
where the flash erase size is 64 KB.

SVN-Revision: 27357
 2011-07-02 08:37:59 +00:00
Imre Kaloz ea8440f4c3 cns21xx belongs to the Econa family, too 
SVN-Revision: 27354
 2011-07-02 08:31:25 +00:00
Imre Kaloz 535cae8393 mark it broken 
SVN-Revision: 27349
 2011-07-02 07:26:04 +00:00
Jo-Philipp Wich 701543d3ef revert r27043 (#9513) 
SVN-Revision: 27343
 2011-07-01 19:52:57 +00:00
Jo-Philipp Wich 1edef5ec98 revert r27341, it introduce wrong behaviour for other models 
SVN-Revision: 27342
 2011-07-01 19:15:45 +00:00
Jo-Philipp Wich 3b3103b2f1 turn status LED off if device finished initializing 
SVN-Revision: 27341
 2011-07-01 18:39:53 +00:00
Imre Kaloz 0ba94475c9 upgrade avr32 u-boot to 2011.06 
SVN-Revision: 27330
 2011-07-01 11:32:01 +00:00
Imre Kaloz 84c89fb02d upgrade to 2.6.39.2 
SVN-Revision: 27329
 2011-07-01 11:31:08 +00:00
Imre Kaloz b655c7c85a preliminary 3.0 support 
SVN-Revision: 27328
 2011-07-01 08:15:48 +00:00
Imre Kaloz 8222c7bb24 add missing kernel symbols 
SVN-Revision: 27327
 2011-07-01 08:11:16 +00:00
Felix Fietkau a41f80bca1 fix the gpio_dev driver: remove existing forward port patches, use unlocked_ioctl on all platforms and fix the arguments to the ioctl handler (based on patch from #9198) 
SVN-Revision: 27322
 2011-07-01 03:20:13 +00:00
Gabor Juhos f9e4619b97 ar71xx: remove CONFIG_MTD_CONCAT ifdefs from the WZR-HP-AG300H code 
The config option has been removed in 2.6.39.

SVN-Revision: 27320
 2011-06-30 12:15:33 +00:00
Hauke Mehrtens 8976fa2622 brcm47xx: deactivate wndr3400 for now as this device will not boot 
SVN-Revision: 27316
 2011-06-29 17:42:34 +00:00
Gabor Juhos d98476c6bd ar71xx: merge 2.6.39 patches 
Also remove the old UART driver for ar933x.

SVN-Revision: 27314
 2011-06-29 08:57:37 +00:00
Gabor Juhos 74a88749f3 ar71xx: remove 2.6.37 support as well 
SVN-Revision: 27313
 2011-06-29 08:57:36 +00:00
Gabor Juhos 1d5378f588 ar71xx: remove 2.6.38 support 
SVN-Revision: 27312
 2011-06-29 08:57:34 +00:00
Gabor Juhos 36e7a8b33e ar71xx: switch to 2.6.39 
SVN-Revision: 27311
 2011-06-29 08:57:33 +00:00
Gabor Juhos 6627574e57 ar71xx: add 2.6.39 support 
SVN-Revision: 27310
 2011-06-29 08:57:32 +00:00
Gabor Juhos 1e138098cd ar71xx: remove ar71xx_gpio_irq_set_type 
SVN-Revision: 27309
 2011-06-29 08:57:30 +00:00
Gabor Juhos 055e317ed8 ar71xx: add separate handlers for IP3 interrupts 
SVN-Revision: 27308
 2011-06-29 08:57:29 +00:00
Gabor Juhos 59bff8bf18 ar71xx: use separate handlers for IP2 interrupts 
SVN-Revision: 27307
 2011-06-29 08:57:28 +00:00
Gabor Juhos 9d6af600e1 ar71xx: remove useless irq_desc.status initializations 
SVN-Revision: 27306
 2011-06-29 08:57:27 +00:00
Gabor Juhos 01ac07c9b3 generic: add MTD_NAND_ECC_BCH symbol for 2.6.39/3.0 
SVN-Revision: 27305
 2011-06-29 08:57:25 +00:00
Hauke Mehrtens 8c62c5d109 brcm47xx: generate image to flash on Netgear WNDR3400. 
The image will not boot because serial flash support is missing this is only for experts.

SVN-Revision: 27302
 2011-06-28 22:23:21 +00:00
Hauke Mehrtens 4c18da3df6 brcm47xx: add initial support for devices with bcma bus. 
Ethernet and wifi are not working and this is highly experimental.

SVN-Revision: 27301
 2011-06-28 22:21:57 +00:00
Hauke Mehrtens 3f0eed15a2 kernel: refresh patches for kernel 3.0-rc5 
SVN-Revision: 27300
 2011-06-28 20:25:39 +00:00
Hauke Mehrtens 2af4f6f634 kernel: update ssb and bcma to linux-next next-20110628 
SVN-Revision: 27299
 2011-06-28 19:33:50 +00:00
Hauke Mehrtens c5821c1a3a kernel: update kernel to 2.6.39.2 
SVN-Revision: 27298
 2011-06-28 19:30:58 +00:00
Imre Kaloz e80ebb769f ethernet cleanup and sata fix - thanks, Chris 
SVN-Revision: 27297
 2011-06-28 06:54:20 +00:00
Hauke Mehrtens 4c392185a6 brcm47xx: update kernel to version 2.6.39 
SVN-Revision: 27296
 2011-06-27 21:29:20 +00:00
Hauke Mehrtens ca979845cc kernel: update ssb and bcma to linux-next next-20110627 
SVN-Revision: 27295
 2011-06-27 21:28:40 +00:00
Hauke Mehrtens e439de144f brcm47xx: fix Linux-3.0 and fix clock rate detection. 
SVN-Revision: 27294
 2011-06-27 20:20:11 +00:00
Hauke Mehrtens c1873c46b8 kernel: update ssb and bcma to linux-next next-20110627 
SVN-Revision: 27293
 2011-06-27 20:18:49 +00:00
Jo-Philipp Wich 2c6bd71767 remove remaining uci-defaults 
SVN-Revision: 27291
 2011-06-27 01:42:31 +00:00
Florian Fainelli 9f63b7326f geos: deprecate uci-defaults files 
Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com>

SVN-Revision: 27287
 2011-06-25 22:05:10 +00:00
Florian Fainelli 1f6047496e alix2: add config files for bridging 
Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com>

SVN-Revision: 27286
 2011-06-25 22:05:05 +00:00
Florian Fainelli 3f40c0f7df remove gpiodev, prefer sysfs gpio 
SVN-Revision: 27284
 2011-06-25 19:26:17 +00:00
Felix Fietkau cc56af716c ar71xx: add default network config for wzr-hp-ag300h (based on a patch from #9607) 
SVN-Revision: 27283
 2011-06-25 13:54:42 +00:00
Felix Fietkau ed7f41792a ar71xx: bring up secondary radio on wzr-hp-ag300h (fixes #9608) 
SVN-Revision: 27282
 2011-06-25 13:48:47 +00:00
Florian Fainelli 85d29f3cd0 add missing linux-3.0 config symbol 
SVN-Revision: 27269
 2011-06-24 11:43:30 +00:00
Florian Fainelli f6e4eb15bc register SSB sprom after ethernet devices 
In case the MAC address pool is not big enough to also register a SSB SPROM
prefer registering the Ethernet devices.

SVN-Revision: 27258
 2011-06-22 12:32:03 +00:00
Florian Fainelli 5a76c6bdd7 fix tab damage in 141-led_count.patch 
SVN-Revision: 27254
 2011-06-21 20:52:58 +00:00
Florian Fainelli 3f0f8d9c87 fix and make usable kmod-pcmcia-rsrc 
This module is also needed for e.g: kmod-bcm63xx-pcmcia

SVN-Revision: 27253
 2011-06-21 20:52:53 +00:00
Hauke Mehrtens 1c0d5f5ae2 kernel: refresh patches for kernel 3.0-rc4 
SVN-Revision: 27247
 2011-06-21 18:39:47 +00:00
Florian Fainelli 9bdf6abb9d use macros to generate SPI registers table and switches 
SVN-Revision: 27246
 2011-06-21 10:05:51 +00:00
Florian Fainelli 6cb3195b40 fix usb mis-cleanup after r27162 (#9581) 
SVN-Revision: 27243
 2011-06-20 10:04:53 +00:00
Jo-Philipp Wich 70fb318a90 Restrict Soekris specific base-files handling to Soekris profiles, based on patch by Philip Prindeville <philipp@redfish-solutions.com> 
SVN-Revision: 27241
 2011-06-19 23:05:21 +00:00
Jo-Philipp Wich 9cd64fa754 generic: Remove IPv6 depependency of bridge in 2.6.38+ Since 2.6.38 the bridge module has a dependency to IPv6 if IPv6 is enabled. Since the IPv6 module isn't exactly lightweight and bridge also only needs a single function from IPv6, it's rather easy to create a common "lib" module with a RCU pointer to the actual implementation, if the IPv6 module is loaded (although slightly hackish). 
The codepath seems to be only taken when using IPv6, so there should be
no negative side effects when IPv6 isn't loaded. I did not measure how
big the performance impact is.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 27237
 2011-06-19 22:48:53 +00:00
Florian Fainelli ab74628c10 dev-spi.c checks for running CPU, not board code 
SVN-Revision: 27236
 2011-06-19 20:46:00 +00:00
Florian Fainelli 4dd4cbeb43 fixup patches after r27234 
SVN-Revision: 27235
 2011-06-19 20:28:38 +00:00
Florian Fainelli 7819b530da remove accidental bcm6345 related patches 
SVN-Revision: 27234
 2011-06-19 20:16:59 +00:00
Florian Fainelli 12db3df666 remove support for 2.6.37 and 2.6.38 
SVN-Revision: 27233
 2011-06-19 20:14:22 +00:00
Florian Fainelli 6bb0a608dc switch to 2.6.39 
SVN-Revision: 27232
 2011-06-19 20:12:45 +00:00
Florian Fainelli bcada2640b remove 2.6.35 and 2.6.32 support 
SVN-Revision: 27230
 2011-06-19 20:09:40 +00:00