Commit Graph

162 Commits (002264d5b1ac6e6d04b1dd569060de8ce03aa272)

Author SHA1 Message Date
Martin Blumenstingl a20616863d lantiq: use ath9k device tree bindings binding/owl-loader
This moves the extraction of the eeprom/calibration data to a hotplug
firmware script. Additionally it modifies all .dts to configure ath9k
directly from within the .dts.

The owl-loader approach enables support on devices with exotic eeprom
data locations (such as unaligned positions on the flash or data
inside an UBI volume).

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
[add ath9k caldata mac address patcher]
[fixes DGN3500 wifi mac]
[fixes BTHOMEHUBV3A wifi mac]
[set invalid mac for BTHOMEHUB2B, FRITZ3370, FRITZ7320 & FRITZ7360SL to restore previous random mac behavior]
Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-11-29 21:40:16 +01:00
Hauke Mehrtens 9371542783 lantiq: add Falcon support
This adds support for the Intel Falcon SoC for GPON.

Support for the Falcon SoC was removed in commit c821836395 svn rev:
40392 from OpenWrt, this commit adds it again.

This patch adds a new subtarget for the Falcon SoC, but it still misses
all the drivers needed to control the GPON part.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2016-11-27 17:40:20 +01:00
Mathias Kresin 5cdbc86329 lantiq: add swconfig to the default packages
The DEVICE_PACKAGES are not included in the initramfs image in case
TARGET_PER_DEVICE_ROOTFS is set. This might produces initramfs images
with a not working network configuration because of a missing swconfig.

Workaround the issues by adding the essential swconfig package to the
default packages selection and deselect swconfig for boards not having
swconfig included before via device packages.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-11-27 15:34:23 +01:00
Felix Fietkau c2582f58dc lantiq: add missing metadata for tp-link images
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-11-21 16:13:55 +01:00
Ben Mulvihill ffd7c15500 lantiq: use dwc2 by default on danube
Use dwc2 by default on all danube boards.

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>
2016-11-21 11:04:17 +01:00
Felix Fietkau 7738227321 lantiq: run append-metadata before check-size to fix build errors
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-11-19 14:19:27 +01:00
Felix Fietkau be296745f8 lantiq: append metadata to images
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-11-19 11:24:10 +01:00
dpeddi 8565630e14 lantiq: add tapi/vmmc to VGV7519 defaults
Signed-off-by: Eddi De Pieri <eddi@depieri.net>
2016-11-16 10:57:48 +01:00
Eddi De Pieri 904a6751b6 lantiq: add tapi/vmmc to VGV7510KW22 defaults
Signed-off-by: Eddi De Pieri <eddi@depieri.net>
2016-11-16 10:57:14 +01:00
Mathias Kresin fa14124616 lantiq: use new build code for DGN3500
Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-10-19 19:06:15 +02:00
Mathias Kresin 1f7a03a706 lantiq: drop lzma-loader
It isn't used any more.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-10-19 19:06:15 +02:00
Mathias Kresin 17094e9e64 lantiq: rework VG3503J image
Use the new image build code and remove the lzma loader. The lzma
loader was used to cheat the signature validation of the bootloader and
I found another way to do this.

To migrate boards already using LEDE/OpenWrt to the new image the
following steps need to be done once:

  VR9 # run reset_uboot_config
  VR9 # reset
  VR9 # setenv ethaddr AA:BB:CC:DD:EE:FF
  VR9 # setenv preboot ping 1.1.1.1\;bootm 0xb001f000
  VR9 # saveenv
  VR9 # tftp 0x81000000 lede-lantiq-xrx200-VG3503J-squashfs-sysupgrade.bin
  VR9 # erase 0xb0020000 $(filesize)
  VR9 # cp.b 0x81000000 0xb0020000 $(filesize)

The mac address is printed on the label at the bottom of the case.

The following steps are need to be done during first install:

  VR9 # setenv preboot ping 1.1.1.1\;bootm 0xb001f000
  VR9 # saveenv
  VR9 # tftp 0x81000000 lede-lantiq-xrx200-VG3503J-squashfs-sysupgrade.bin
  VR9 # erase 0xb0020000 $(filesize)
  VR9 # cp.b 0x81000000 0xb0020000 $(filesize)

The image uses the uImage firmware splitter now instead of hardcoded
kernel and rootfs partitions. The firmware partition size was extended
to use flash space that was reserved for partitions required only by
the ECI firmware.

Due to the changes an upgrade to a later LEDE revision from a running
LEDE is supported now.

A default switch config was added and the device uses the same MAC
addresses as the ECI firmware now instead of the same for all VG3503J.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-10-19 19:06:15 +02:00
Rafał Miłecki 0658527e1e switch to the new usbport LED trigger
This makes init.d script handle existing UCI entries using the new
trigger. It also switches all targets to use its package.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-10-19 12:09:45 +02:00
Mathias Kresin 36afaae847 lantiq: use wpad-mini for WBMR boards
The WBMR boards are the only ones in the whole tree selecting the wpad
and hostapd-utils package by default.

Remove the wps uci-default script as well, there is no obvious reason
why the wps config need to be set only for this board.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-10-15 09:01:45 +02:00
Mathias Kresin 993ca3b747 lantiq: fix BTHOMEHUBV2B default packages
Due to the introduced double whitespace the default package selection
isn't applied. This leads to errors like a not working networking
because of a missing swconfig binary.

Fixes FS#208.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-10-06 22:58:50 +02:00
Mathias Kresin 7659f9ad9e lantiq: fix usb leds/trigger
Add USB led aliases to boards having an led which is meant to be used
as USB led according to the manuals.

Remove the kmod-ledtrig-usbdev from the default package selection for
boards not having an USB led. Add the kmod-ledtrig-usbdev to boards
where it is missing.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-10-05 19:23:23 +02:00
Mathias Kresin e7ec7a08aa image: use k as unit suffix for blocksize
Use k as unit suffix for kilobyte to have a the same unit regardless of
the used filesystem.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-09-04 08:56:05 +02:00
Martin Blumenstingl c6164d9610 lantiq: fix building AVM/EVA sysupgrade images on NOR devices
Device/AVM unconditionally inherits Device/NAND, which changes the
sysupgrade image to sysupgrade-tar (instead of a "raw" sysupgrade image
as used in the Device/Default template).
This moves the Device/NAND call to the FRITZ3370 device definition, as
this is the only AVM/EVA device that uses NAND.
Additionally we have to define the IMAGE_SIZE for the AVM/EVA NOR
devices to ensure that the images are not discarded.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
2016-08-22 07:43:11 +02:00
Matti Laakso 9f5ee6f6c0 lantiq: add kmod-ledtrig-usbdev to device packages which have usb led
By default USB LEDs are associated with usbdev trigger. However,
not all devices which have USB LEDs have kmod-ledtrig-usbdev in their
list of default packages. Add it to the relevant devices.

Signed-off-by: Matti Laakso <matti.laakso@outlook.com>
2016-08-15 15:32:38 +02:00
Felix Fietkau 941ebafda0 lantiq: enable missing ath10k firmware for BT Home Hub 5A
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-08-01 18:32:36 +02:00
Felix Fietkau 63b525dd6b image: add a helper variable for getting kernel/rootfs from within image Build/* templates
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-31 12:25:25 +02:00
Jo-Philipp Wich db49dd894e build: rename sysupgrade-nand to sysupgrade-tar
Now that the "sysupgrade-nand" step is used by non-NAND targets as well,
rename it to "sysupgrade-tar" to make it more generic.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-07-29 16:53:03 +02:00
Mathias Kresin e6a7e6ed25 lantiq: fix image creation of P2812HNUF3 & BTHOMEHUBV3A
Both devices were converted to the new image build code but still using
the LegacyDevice define. Therefore an image isn't created for the
mentioned devices.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-07-22 09:46:44 +02:00
Felix Fietkau ab92f57684 lantiq: convert remaining xway NAND devices to new image build code
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-20 10:13:50 +02:00
Felix Fietkau f12e964733 lantiq: convert AVM xrx200 devices to new image build code
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-20 10:13:50 +02:00
Felix Fietkau bdfed2a2c3 lantiq: convert simple xrx200 devices to new image build code
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-20 10:13:50 +02:00
Felix Fietkau 22c0206044 lantiq: add image build template for NAND devices
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-20 10:13:50 +02:00
Felix Fietkau 8058e4778b lantiq: simplify image building code
Specifying the device profile in PROFILES is unnecessary, and for all
devices the DEVICE_PROFILE variable matched the device name.
Get rid of this useless variable and set DEVICE_DTS to $(1)

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-20 10:13:50 +02:00
Felix Fietkau cc88df1a38 lantiq: fix building NAND images in default config
Remove remaining references to $(PROFILE)

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-20 10:13:50 +02:00
Felix Fietkau ceee47ba64 lantiq: disable jffs2 support on xrx200
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-20 10:13:50 +02:00
Felix Fietkau 8e2764ce9b image.mk: clean up redundant code related to DEVICE_DTS
It is used by a core build template, so the variable should be
initialized and added to DEVICE_VARS in the core.
Same for DEVICE_DTS_DIR

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-15 14:14:11 +02:00
Oswald Buddenhagen 9759fde40a lantiq: add support for ARV7506PW11 (Alice/O2 IAD 4421)
Ethernet, ADSL2+ and LEDs are fully functional.

Supporting the two TAE ports and SIP gateway was not attempted.

The WiFi is unreliable, due to experimental support for rt35xx family
devices by the rt2800pci driver.

Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
[rebase to LEDE HEAD]
[switch to normal image instead of brnboot image]
[remove not required pinmux child nodes keys, leds, ebu, exin, pci_in and pci_out]
[remove switch_rst pinmux child node (no support for hw reset in driver/setting a default GPIO value in DT]
[enable usage of the wireless LED]
[fixup mac address configuration]
Sgned-off-by: Mathias Kresin <dev@kresin.me>
2016-06-22 19:32:06 +02:00
Ben Whitten b7baaaf782 kernel: Move append-dtb to common image-commands
This build step is used by various targets, move it to a common section.

Signed-off-by: Ben Whitten <ben.whitten@gmail.com>
2016-06-22 19:32:06 +02:00
John Crispin f054e82bdc lantiq: remove gr7000 support
this seems to have never worked as the wrong SoC is selected

Signed-off-by: John Crispin <john@phrozen.org>
2016-06-22 19:32:06 +02:00
Hauke Mehrtens 8bfa230e9f lantiq: build fullimage.img for EASY80920NAND
This image format is used by Lantiq's / Intel's UGW version 6.1 to 7.1.
These images can be flashed onto a board with the SoC vendor boot
loader as a replacement for the vendor firmware.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2016-06-21 21:58:59 +02:00
Ben Mulvihill 7df43d88ec lantiq: fix typo in new image generation
Fix typo in commit a6f7536a73
(new image generation)

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>
2016-06-21 13:49:54 +02:00
Mathias Kresin 32012decc3 lantiq: fix build of NAND sysupgrade images
The *_UBIFS_OPTS variables need to be prefixed with DEVICE_ to match
the profile name.

The conditions need to be evaluated after the *_UBIFS_OPTS are set,
otherwise the variables are always empty.

Do not append or pass the DEVICE_ prefixed profile name to the images.
Use the name that is passed by the Image/Build/Profile/ step.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-06-20 11:45:44 +02:00
Felix Fietkau 982108f7e5 lantiq: clean up / fix LegacyDevice template handling
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-17 20:23:11 +02:00
Felix Fietkau f4c59a204e lantiq: get rid of ifneq() checks inside command templates
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-17 20:23:11 +02:00
John Crispin 9a0381f969 lantiq: small fix for legacy profile builds
Signed-off-by: John Crispin <john@phrozen.org>
2016-06-17 20:11:24 +02:00
John Crispin a6f7536a73 lantiq: convert remaining legacy targets to the new image generation code
Signed-off-by: John Crispin <john@phrozen.org>
2016-06-17 04:13:07 +02:00
John Crispin 90c48dd49d lantiq: fix VG3503J loader generation
Signed-off-by: John Crispin <john@phrozen.org>
2016-06-14 06:43:02 +02:00
John Crispin 239ad94165 lantiq: add xway_legacy target
due to bloat recent builds fail to fit into the flash of the old danube units

Signed-off-by: John Crispin <john@phrozen.org>
2016-06-13 22:51:43 +02:00
John Crispin bf007a480a lantiq: Add Support for Fritz!Box 7360 SL
Signed-off-by: Sebastian Ortwein <krone@animeland.de>
Tested-by: Guido Lipke <lipkegu@gmail.com>
2016-06-13 22:51:43 +02:00
Felix Fietkau 2d48f93ff4 lantiq: add Buffalo WBMR-300HPD support
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-11 09:49:13 +02:00
Felix Fietkau 97e3d10df9 lantiq: fix image DEVICE_DTS handling, add proper default value
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-07 09:42:11 +02:00
Felix Fietkau 821ccd2b36 lantiq: only call Image/Prepare/Profile for defined profiles
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-07 09:35:18 +02:00
John Crispin ba42c1db41 lantiq: un-macro the image building code
Signed-off-by: John Crispin <john@phrozen.org>
2016-06-05 23:23:57 +02:00
Alexander Couzens 1616bb2a7d lantiq/image: move tplink specific image into own file
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
2016-06-05 23:23:57 +02:00
Alexander Couzens aa930ba3dd lantiq: unmacro tp-link boards
even it's a little bit verbose, unmacrod board descriptions are much
easier to read and to understand.

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
2016-06-05 23:23:57 +02:00