mirror of https://github.com/hak5/openwrt.git
lantiq: add support for ARV7506PW11 (Alice/O2 IAD 4421)
Ethernet, ADSL2+ and LEDs are fully functional. Supporting the two TAE ports and SIP gateway was not attempted. The WiFi is unreliable, due to experimental support for rt35xx family devices by the rt2800pci driver. Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de> [rebase to LEDE HEAD] [switch to normal image instead of brnboot image] [remove not required pinmux child nodes keys, leds, ebu, exin, pci_in and pci_out] [remove switch_rst pinmux child node (no support for hw reset in driver/setting a default GPIO value in DT] [enable usage of the wireless LED] [fixup mac address configuration] Sgned-off-by: Mathias Kresin <dev@kresin.me>lede-17.01
Oswald Buddenhagen
John Crispin
parent
b67066b8fa
commit
9759fde40a
|
|
@ -27,6 +27,9 @@ board_config_update
|
|||
board=$(lantiq_board_name)
|
||||
|
||||
case "$board" in
|
||||
ARV7506PW11)
|
||||
ucidef_set_led_wlan "wifi" "wifi" "arv7506pw11:green:wlan" "phy0radio"
|
||||
;;
|
||||
BTHOMEHUBV5A)
|
||||
ucidef_set_led_default "dimmed" "dimmed" "dimmed" "0"
|
||||
;;
|
||||
|
|
|
|||
|
|
@ -45,6 +45,14 @@ ARV4519PW|ARV7510PW22|ARV7518PW|ARV752DPW22|ARV8539PW22)
|
|||
"0t@eth0" "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4"
|
||||
;;
|
||||
|
||||
# rtl8306g
|
||||
ARV7506PW11)
|
||||
lan_mac=$(mtd_get_mac_binary board_config 22)
|
||||
wan_mac=$(macaddr_add "$lan_mac" 2)
|
||||
ucidef_add_switch "switch0" \
|
||||
"4:lan:1" "3:lan:2" "2:lan:3" "1:lan:4" "5t@eth0"
|
||||
;;
|
||||
|
||||
# rtl8306g
|
||||
ARV7519PW)
|
||||
lan_mac=$(mtd_get_mac_binary board_config 22)
|
||||
|
|
|
|||
|
|
@ -35,7 +35,7 @@ case "$FIRMWARE" in
|
|||
"RT2860.eeprom" )
|
||||
local board=$(lantiq_board_name)
|
||||
case $board in
|
||||
ARV7510PW22|ARV7519PW|ARV752DPW|ARV752DPW22|VGV7519)
|
||||
ARV7506PW11|ARV7510PW22|ARV7519PW|ARV752DPW|ARV752DPW22|VGV7519)
|
||||
rt2x00_eeprom_extract "board_config" 520 256 1
|
||||
;;
|
||||
ARV7525PW)
|
||||
|
|
|
|||
|
|
@ -0,0 +1,159 @@
|
|||
/dts-v1/;
|
||||
|
||||
/include/ "danube.dtsi"
|
||||
|
||||
/ {
|
||||
model = "ARV7506PW11 - Alice/O2 IAD 4421";
|
||||
|
||||
chosen {
|
||||
leds {
|
||||
boot = &power;
|
||||
failsafe = &power_red;
|
||||
running = &power;
|
||||
|
||||
dsl = &dsl;
|
||||
internet = &internet;
|
||||
wifi = &wlan;
|
||||
};
|
||||
};
|
||||
|
||||
memory@0 {
|
||||
reg = <0x0 0x4000000>;
|
||||
};
|
||||
|
||||
fpi@10000000 {
|
||||
localbus@0 {
|
||||
nor-boot@0 {
|
||||
compatible = "lantiq,nor";
|
||||
bank-width = <2>;
|
||||
reg = <0 0x0 0x800000>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "uboot";
|
||||
reg = <0x00000 0x40000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@40000 {
|
||||
label = "uboot_env";
|
||||
reg = <0x40000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@50000 {
|
||||
label = "firmware";
|
||||
reg = <0x50000 0x7a0000>;
|
||||
};
|
||||
|
||||
partition@7f0000 {
|
||||
label = "board_config";
|
||||
reg = <0x7f0000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
mac_addr {
|
||||
compatible = "lantiq,eth-mac";
|
||||
reg = <0 0x7f0016 0x6>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio: pinmux@E100B10 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&state_default>;
|
||||
|
||||
state_default: pinmux {
|
||||
pci {
|
||||
lantiq,groups = "gnt1";
|
||||
lantiq,function = "pci";
|
||||
lantiq,output = <1>;
|
||||
};
|
||||
pci_rst {
|
||||
lantiq,pins = "io21";
|
||||
lantiq,pull = <2>;
|
||||
lantiq,output = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
/* GPIO 19: switch reset */
|
||||
etop@E180000 {
|
||||
phy-mode = "rmii";
|
||||
};
|
||||
|
||||
pci@E105400 {
|
||||
status = "okay";
|
||||
gpio-reset = <&gpio 21 0>;
|
||||
};
|
||||
};
|
||||
|
||||
ralink_eep {
|
||||
compatible = "ralink,eeprom";
|
||||
ralink,eeprom = "RT2860.eeprom";
|
||||
};
|
||||
|
||||
gpio-keys-polled {
|
||||
compatible = "gpio-keys-polled";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
poll-interval = <100>;
|
||||
|
||||
rfkill {
|
||||
label = "rfkill";
|
||||
gpios = <&gpio 11 1>;
|
||||
linux,code = <0xf7>;
|
||||
};
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&gpio 30 1>;
|
||||
linux,code = <0x198>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
wlan: wlan {
|
||||
label = "arv7506pw11:green:wlan";
|
||||
gpios = <&gpio 2 1>;
|
||||
};
|
||||
power: power {
|
||||
label = "arv7506pw11:green:power";
|
||||
gpios = <&gpio 3 1>;
|
||||
default-state = "keep";
|
||||
};
|
||||
dsl: dsl {
|
||||
label = "arv7506pw11:green:dsl";
|
||||
gpios = <&gpio 4 1>;
|
||||
};
|
||||
internet: internet {
|
||||
label = "arv7506pw11:green:internet";
|
||||
gpios = <&gpio 5 1>;
|
||||
};
|
||||
power_red: power_red {
|
||||
label = "arv7506pw11:red:power";
|
||||
gpios = <&gpio 6 1>;
|
||||
};
|
||||
internet_red {
|
||||
label = "arv7506pw11:red:internet";
|
||||
gpios = <&gpio 7 1>;
|
||||
};
|
||||
info {
|
||||
label = "arv7506pw11:green:info";
|
||||
gpios = <&gpio 8 1>;
|
||||
};
|
||||
telefon {
|
||||
label = "arv7506pw11:green:telefon";
|
||||
gpios = <&gpio 9 1>;
|
||||
};
|
||||
info_red {
|
||||
label = "arv7506pw11:red:info";
|
||||
gpios = <&gpio 20 1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -371,6 +371,18 @@ define Device/ARV4519PW
|
|||
endef
|
||||
TARGET_DEVICES += ARV4519PW
|
||||
|
||||
define Device/ARV7506PW11
|
||||
DEVICE_PROFILE := ARV7506PW11
|
||||
IMAGE_SIZE := 7808k
|
||||
DEVICE_TITLE := Alice/O2 IAD 4421 - ARV7506PW11
|
||||
DEVICE_PACKAGES := kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
|
||||
kmod-ltq-adsl-danube-fw-b kmod-ltq-atm-danube \
|
||||
ltq-adsl-app ppp-mod-pppoa \
|
||||
kmod-rt2800-pci wpad-mini \
|
||||
swconfig
|
||||
endef
|
||||
TARGET_DEVICES += ARV7506PW11
|
||||
|
||||
define Device/ARV7510PW22
|
||||
DEVICE_PROFILE := ARV7510PW22
|
||||
IMAGE_SIZE := 31232k
|
||||
|
|
|
|||
Loading…
Reference in New Issue