lantiq: Add Support for Fritz!Box 7360 SL

Signed-off-by: Sebastian Ortwein <krone@animeland.de>
Tested-by: Guido Lipke <lipkegu@gmail.com>
lede-17.01
John Crispin 2016-06-11 15:05:52 +02:00
parent 8bd02b1381
commit bf007a480a
5 changed files with 233 additions and 0 deletions

View File

@ -76,6 +76,11 @@ DGN3500*)
"3:lan:1" "2:lan:2" "1:lan:3" "0:lan:4" "5t@eth0"
;;
FRITZ7360SL)
ucidef_add_switch "switch0" \
"4:lan:1" "2:lan:2" "0:lan:3" "1:lan:4" "6t@eth0"
;;
GR7000)
ucidef_set_interface_wan "eth0"
;;

View File

@ -0,0 +1,217 @@
/dts-v1/;
/include/ "vr9.dtsi"
/ {
model = "FRITZ7360SL - 1&1 HomeServer";
chosen {
bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
leds {
boot = &power_green;
failsafe = &power_red;
running = &power_green;
internet = &info_green;
dsl = &power_green;
wifi = &wifi;
};
};
memory@0 {
reg = <0x0 0x8000000>;
};
fpi@10000000 {
localbus@0 {
nor-boot@0 {
compatible = "lantiq,nor";
bank-width = <2>;
reg = <0 0x0 0x1000000>;
#address-cells = <1>;
#size-cells = <1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
urlader: partition@0 {
label = "urlader";
reg = <0x00000 0x20000>;
read-only;
};
partition@20000 {
label = "firmware";
reg = <0x20000 0xf60000>;
};
partition@f80000 {
label = "tffs (1)";
reg = <0xf80000 0x40000>;
read-only;
};
partition@fc0000 {
label = "tffs (2)";
reg = <0xfc0000 0x40000>;
read-only;
};
};
};
};
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
mdio {
lantiq,groups = "mdio";
lantiq,function = "mdio";
};
phy-rst {
lantiq,pins = "io37", "io44";
lantiq,pull = <2>;
lantiq,open-drain;
lantiq,output = <1>;
};
pcie-rst {
lantiq,pins = "io38";
lantiq,pull = <0>;
lantiq,output = <1>;
};
};
};
ifxhcd@E101000 {
status = "okay";
lantiq,portmask = <0x3>;
};
ifxhcd@E106000 {
status = "okay";
};
};
ath9k_eep {
compatible = "ath9k,eeprom";
ath,eep-flash = <&urlader 0x985>;
ath,eep-endian;
ath,eep-swap;
ath,pci-slot = <0>;
};
gphy-xrx200 {
compatible = "lantiq,phy-xrx200";
firmware = "lantiq/vr9_phy11g_a2x.bin";
phys = [ 00 01 ];
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
dect {
label = "power";
gpios = <&gpio 1 0>;
linux,code = <0x102>;
};
wifi {
label = "wifi";
gpios = <&gpio 29 0>;
linux,code = <0x101>;
};
};
gpio-leds {
compatible = "gpio-leds";
power_green: power {
label = "fritz7360sl:green:power";
gpios = <&gpio 32 1>;
default-state = "keep";
};
power_red: power2 {
label = "fritz7360sl:red:power";
gpios = <&gpio 33 1>;
};
info_red {
label = "fritz7360sl:red:info";
gpios = <&gpio 34 1>;
};
info_green: info_green {
label = "fritz7360sl:green:info";
gpios = <&gpio 47 1>;
};
wifi: wifi {
label = "fritz7360sl:green:wlan";
gpios = <&gpio 36 1>;
};
dect {
label = "fritz7360sl:green:dect";
gpios = <&gpio 35 1>;
};
};
};
&eth0 {
lan: interface@0 {
compatible = "lantiq,xrx200-pdi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
mac-address = [ 00 11 22 33 44 55 ];
lantiq,switch;
ethernet@0 {
compatible = "lantiq,xrx200-pdi-port";
reg = <0>;
phy-mode = "rmii";
phy-handle = <&phy0>;
// gpios = <&gpio 37 1>;
};
ethernet@1 {
compatible = "lantiq,xrx200-pdi-port";
reg = <1>;
phy-mode = "rmii";
phy-handle = <&phy1>;
// gpios = <&gpio 44 1>;
};
ethernet@2 {
compatible = "lantiq,xrx200-pdi-port";
reg = <2>;
phy-mode = "gmii";
phy-handle = <&phy11>;
};
ethernet@3 {
compatible = "lantiq,xrx200-pdi-port";
reg = <4>;
phy-mode = "gmii";
phy-handle = <&phy13>;
};
};
mdio@0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "lantiq,xrx200-mdio";
phy0: ethernet-phy@0 {
reg = <0x00>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
};
phy1: ethernet-phy@1 {
reg = <0x01>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
};
phy11: ethernet-phy@11 {
reg = <0x11>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
};
phy13: ethernet-phy@13 {
reg = <0x13>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
};
};
};

View File

@ -642,6 +642,9 @@ FRITZ3370_UBI_OPTS:="-m 2048 -p 128KiB -s 512"
Image/BuildKernel/Profile/FRITZ3370=$(call Image/BuildKernelEVA/Template,FRITZ3370)
Image/Build/Profile/FRITZ3370=$(call Image/BuildEVA/$(1),$(1),FRITZ3370)
Image/BuildKernel/Profile/FRITZ7360SL=$(call Image/BuildKernelEVA/Template,FRITZ7360SL)
Image/Build/Profile/FRITZ7360SL=$(call Image/BuildEVA/$(1),$(1),FRITZ7360SL)
Image/BuildKernel/Profile/VG3503J=$(call Image/BuildKernelLoader/Template,VG3503J)
Image/Build/Profile/VG3503J=$(call Image/BuildLoader/$(1),$(1),VG3503J)

View File

@ -1,5 +1,6 @@
CONFIG_ADM6996_PHY=y
CONFIG_AR8216_PHY=y
CONFIG_AT803X_PHY=y
CONFIG_CPU_MIPSR2_IRQ_EI=y
CONFIG_CPU_MIPSR2_IRQ_VI=y
CONFIG_CPU_RMAP=y

View File

@ -4,3 +4,10 @@ define Profile/FRITZ3370
endef
$(eval $(call Profile,FRITZ3370))
define Profile/FRITZ7360SL
NAME:=1&1 HomeServer - FRITZ7360SL
PACKAGES:=kmod-ath9k wpad-mini kmod-usb-dwc2
endef
$(eval $(call Profile,FRITZ7360SL))