Jonas Gorski
526aedb705
kernel: move CONFIG_MIPS_SEAD3 to generic
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36617
2013-05-12 21:41:55 +00:00
Felix Fietkau
0be8dd36dc
ar71xx: set mips16 support, tune cflags for 34kc (works well on MIPS 24K as well, but helps a lot for 34K and 74K)
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36600
2013-05-09 23:32:46 +00:00
Gabor Juhos
cb3d71ca8e
ar71xx: use combined kernel image in the CameoHornet template
...
This allow us to increase the kernel partition size,
and ensures, that the -factory image still usable via
the original interface.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36584
2013-05-08 17:11:10 +00:00
Gabor Juhos
f938a798f8
ar71xx: add profile and build image for the RNX-N360RT board
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36582
2013-05-08 17:07:19 +00:00
Gabor Juhos
852b8e9490
ar71xx: add user-space model detection for the RNX-N360RT board
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36581
2013-05-08 17:07:18 +00:00
Gabor Juhos
c70694e755
ar71xx: add profile and build image for Netgear WNDAP360
...
[juhosg: this has been created from the following patch:
http://patchwork.openwrt.org/patch/3620/ ]
Signed-off-by: Jacek Kikiewicz <jaceq@aol.pl>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36580
2013-05-08 17:03:43 +00:00
Gabor Juhos
33a2cbfd5c
ar71xx: add user-space support for Netgear WNDAP360
...
[juhosg: this has been created from the following patch:
http://patchwork.openwrt.org/patch/3620/ ]
Signed-off-by: Jacek Kikiewicz <jaceq@aol.pl>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36579
2013-05-08 17:03:42 +00:00
Gabor Juhos
10b3ca5ccb
ar71xx: add kernel support for Netgear WNDAP360
...
Here is corrected version (only thing not working are wifi LEDs).
[juhosg: this has been created from the following patch:
http://patchwork.openwrt.org/patch/3620/ ]
Signed-off-by: Jacek Kikiewicz <jaceq@aol.pl>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36578
2013-05-08 17:03:34 +00:00
Gabor Juhos
e57c7d6c12
kernel: update linux 3.8 to 3.8.12
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36576
2013-05-08 08:53:53 +00:00
Gabor Juhos
d09ba5ef10
ar71xx: Fix AP135 partition layout
...
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36575
2013-05-08 08:53:49 +00:00
Gabor Juhos
ccf95fe938
ar71xx: Fix AP135 PCI
...
AP135 has a pluggable PCIE slot unlike AP136.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36541
2013-05-03 19:00:58 +00:00
Felix Fietkau
18c588a570
ar71xx: add an external reset callback for ar913x and use it in ath9k - should reduce the frequency of DMA stop failures
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36530
2013-05-03 09:12:19 +00:00
Gabor Juhos
8a9fe26f20
kernel: update linux 3.8 to 3.8.11
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36507
2013-05-01 22:15:18 +00:00
Gabor Juhos
0ae43dbe9d
ar71xx: rename WNR2000v3 support patch
...
Update the numbering of kernel patch for supporting
Netgear WNR2000v3 from 617 to 618.
Signed-off-by: yousong <yszhou4tech@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36498
2013-04-30 10:44:11 +00:00
Gabor Juhos
f718179af5
kernel: update linux 3.8 to 3.8.10
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36493
2013-04-30 10:43:59 +00:00
Gabor Juhos
7c2632fbc5
ar71xx: add user-space support for WNR2000v3
...
Signed-off-by: Mathieu Olivari <mathieu.olivari@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36461
2013-04-26 17:00:54 +00:00
Gabor Juhos
b29b7b65ea
ar71xx: add profile and build image for WNR2000v3
...
Signed-off-by: Mathieu Olivari <mathieu.olivari@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36460
2013-04-26 17:00:53 +00:00
Gabor Juhos
9b3c0d11a2
ar71xx: Add Netgear WNR2000v3 support
...
Network connectivity works fine (LAN and WAN).
For GPIOs, only pwr led and the green wan leds are supported for now.
Signed-off-by: Mathieu Olivari <mathieu.olivari@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36459
2013-04-26 17:00:52 +00:00
Gabor Juhos
183e2af1c7
ar71xx: add profile and build image for the TL-WR720N v3 board
...
Signed-off-by: yousong <yszhou4tech@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36458
2013-04-26 17:00:50 +00:00
Gabor Juhos
7c4e2c1f72
ar71xx: add user-space support for the TL-WR720N v3 board
...
Signed-off-by: yousong <yszhou4tech@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36457
2013-04-26 17:00:49 +00:00
Gabor Juhos
5c11773f8a
ar71xx: add kernel support for TPLINK WR720N v3
...
Add support for TPLINK WR720N v3 which has 4MB flash,
32MB ram, 2 ethernet interfaces, 1 USB 2.0 port.
The patch is mostly a modification from mach-tl-wr703n.c.
GPIO numbers for the slider switch is from mach-tl-mr3020n.c.
Tested on my device and they worked fine.
Signed-off-by: yousong <yszhou4tech@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36456
2013-04-26 17:00:48 +00:00
Gabor Juhos
36d4fd70bc
kernel: update linux 3.8 to 3.8.9
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36453
2013-04-26 16:55:42 +00:00
Steven Barth
4e8f7f37ed
Change default IPv6 config to enable DHCPv6-PD
...
SVN-Revision: 36384
2013-04-22 19:40:16 +00:00
Felix Fietkau
cd35ea2174
ar71xx: merge more unaligned access hacks from cerowrt-next
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36374
2013-04-22 12:53:21 +00:00
Gabor Juhos
151cadfe32
kernel: update linux 3.8 to 3.8.8
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36363
2013-04-19 08:07:34 +00:00
Gabor Juhos
604395650a
kernel: update linux 3.8 to 3.8.7
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36332
2013-04-14 09:25:53 +00:00
Steven Barth
ea94d66b0f
Adapt default network configuration for IPv6
...
SVN-Revision: 36278
2013-04-09 08:03:08 +00:00
Gabor Juhos
f78c902cfd
kernel: update linux 3.8 to 3.8.6
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36215
2013-04-06 11:40:44 +00:00
Gabor Juhos
f7da2127ab
ar71xx: fix ethernet LEDs on the TL-WDR3500
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36122
2013-03-25 06:40:03 +00:00
Gabor Juhos
39c132d154
ar71xx: add GPIO output select values for AR934x
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36121
2013-03-25 06:40:00 +00:00
Gabor Juhos
849201b1d8
ar71xx: add default LED configuration for the WL-WRD3500
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36120
2013-03-24 21:07:21 +00:00
Gabor Juhos
cd5cca4ba8
ar71xx: fix USB power GPIO on the TL-WDR3500
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36119
2013-03-24 19:23:47 +00:00
Gabor Juhos
4daefc9480
ar71xx: remove numeric suffix of the TL-WDR3500 USB LED
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36118
2013-03-24 19:23:45 +00:00
Gabor Juhos
a4a2a7189f
ar71xx: add diag support for the TL-WDR3500
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36117
2013-03-24 19:23:43 +00:00
Gabor Juhos
38c991311b
ar71xx: add default switch configuration for the TL-WDR3500
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36116
2013-03-24 19:23:36 +00:00
Gabor Juhos
07532dca7f
kernel: update linux 3.8 to 3.8.3
...
Also refresh the related generic/platform patches.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36039
2013-03-15 14:39:51 +00:00
Gabor Juhos
d614f8a880
ar71xx: build images for the TL-MR11U v2
...
[juhosg: use different profile name for v1 and v2, and add
multi profile to build for both versions]
Signed-off-by: Guilhem Lettron <guilhem@lettron.fr>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36038
2013-03-15 14:35:52 +00:00
Gabor Juhos
35d41db979
ar71xx: rw2458n - Use eeprom (art) from wifi card
...
Use eeprom (art) from included wifi card, not hard coded in flash.
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36037
2013-03-15 14:35:50 +00:00
Gabor Juhos
8deffcba7e
ar71xx: Error fix in Kernel for MR3420v2 Ethernet Switch configuration
...
Error in using another MDIO (AP123 platform using only one GE1 device
for eth0 and eth1) for the router mr3420v2.
?onfirmed: https://forum.openwrt.org/viewtopic.php?pid=194779#p194779
Routers in this sense are the same and the only difference is: USB
port, USB led, instead of the GPIO-switch we have GPIO-button.
Signed-off-by: Dmytro <dioptimizer@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36036
2013-03-15 14:35:48 +00:00
John Crispin
043d56b646
make sure the console works when using procd as our pid 1
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36000
2013-03-13 18:11:00 +00:00
John Crispin
fad5f5700e
make sure errors get sent to /dev/null
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 35987
2013-03-12 13:52:33 +00:00
Gabor Juhos
14ca5fc98b
ar71xx: om2p-hs: use correct bit mask to disable JTAG functionality
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35966
2013-03-11 19:52:54 +00:00
Gabor Juhos
72fc0c1906
ar71xx: add AR934X_GPIO_FUNC_* defines
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35965
2013-03-11 19:52:51 +00:00
Gabor Juhos
44cc1507e9
ar71xx: makefile changes to build image for MR3420v2
...
Patch-by: Dmytro <dioptimizer@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3440/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35964
2013-03-11 15:55:25 +00:00
Gabor Juhos
2998abab7c
ar71xx: add user-space support for MR3420v2
...
Patch-by: Dmytro <dioptimizer@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3442/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35962
2013-03-11 15:55:22 +00:00
Gabor Juhos
902dd27383
ar71xx: add kernel support for MR3420v2
...
[juhosg: use gpio_request_one to enable the USB power]
Patch-by: Dmytro <dioptimizer@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@opewrt.org>
SVN-Revision: 35961
2013-03-11 15:55:20 +00:00
Gabor Juhos
5c5e1c0a9d
ar71xx: enabling control GPIO14 and GPIO15 on MR3040/MR11U
...
LAN1 and LAN2 LEDs not present (it pulled to ground via
resistors) on MR3040 and MR11U devices. This little patch
enabling ability to control GPIO14 and GPIO15.
Patch-by: Dmytro <dioptimizer@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3439/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35960
2013-03-11 15:55:19 +00:00
Gabor Juhos
257bfc21af
ar71xx: add profile support for dir-835-a1
...
Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at>
Patchwork: http://patchwork.openwrt.org/patch/3427/mbox/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35959
2013-03-11 15:55:17 +00:00
Gabor Juhos
3fa3cbae7c
ar71xx: add user space support for dir-835-a1
...
Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at>
Patchwork: http://patchwork.openwrt.org/patch/3425/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35958
2013-03-11 15:55:15 +00:00
Gabor Juhos
a7525f5f5d
ar71xx: add kernel support for dir-835-a1
...
[juhosg:
- remove custom mdio bus info and platform data for ar8327, clear the
.led_cfg field from dir835a1_setup instead,
- remove arguments of dir835c1_generic_setup function, register the
LEDs directly from the board specific setup instead]
Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at>
Patchwork: http://patchwork.openwrt.org/patch/3426/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35957
2013-03-11 15:55:13 +00:00
Gabor Juhos
e8a5312bef
ar71xx: correct board name to make LEDs work on RB750
...
Patch by: Denver A <denvera@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3419/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35919
2013-03-10 07:20:57 +00:00
Gabor Juhos
947bc9d36f
ar71xx: add backported watchdog patches
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35879
2013-03-04 12:08:28 +00:00
Gabor Juhos
1d55249d7c
ar71xx: use backported QCA955x patches
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35878
2013-03-04 11:48:15 +00:00
Gabor Juhos
64a9fe2894
ar71xx: use backported PCI patches
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35877
2013-03-04 11:48:08 +00:00
Gabor Juhos
12d49b5195
ar71xx: use backported MISC IRQ patch
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35876
2013-03-04 11:48:06 +00:00
Gabor Juhos
4c31b9f43e
ar71xx: use backported GPIO patches
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35875
2013-03-04 11:48:04 +00:00
Luka Perkov
120028af99
ar71xx: enable building ramdisk images for WZRHPG30XNH board types
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
Acked-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35874
2013-03-04 11:37:28 +00:00
Gabor Juhos
0ad50b0bec
ar71xx: use backported SPI patches
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35873
2013-03-04 09:40:44 +00:00
Gabor Juhos
3ee484d54c
ar71xx: remove 3.7 support
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35870
2013-03-04 09:03:50 +00:00
Gabor Juhos
d5adb0dbdd
ar71xx: switch to 3.8
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35869
2013-03-04 08:47:38 +00:00
Luka Perkov
a5ebfc79ba
ar71xx: rework changes from r35840
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35865
2013-03-03 21:59:34 +00:00
Gabor Juhos
26fbc15a86
kernel: update linux 3.8 to 3.8.1
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35862
2013-03-03 13:58:52 +00:00
Gabor Juhos
23b3b3a194
kernel: update linux 3.7 to 3.7.10
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35860
2013-03-03 13:57:40 +00:00
Gabor Juhos
4491da2bd4
ar71xx: update MAC address assignment for dir-825-c1
...
Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35855
2013-03-03 12:47:37 +00:00
Gabor Juhos
200aa6db83
ar71xx: fixes leds for dir-825-c1
...
Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35854
2013-03-03 12:47:33 +00:00
Luka Perkov
107e0c6d1f
ar71xx: add support for Buffalo WZR 600DHP
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 35840
2013-03-01 13:46:01 +00:00
Gabor Juhos
f7879cd8d8
ar71xx: add profile and build image fot the TL-WA830RE v1 board
...
Added support for the TP-LINK TL-WA830RE v1 Range Extender.
Based on the WA901ND v1 support. Hardware IDs checked against
original firmware. Patch was successfully tested on hardware.
Signed-off-by: Ronald Hecht <ronald.hecht@gmx.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35789
2013-02-25 20:37:35 +00:00
Gabor Juhos
ea71239d8a
ar71xx: add model detection for the TL-WA830RE board
...
Signed-off-by: Ronald Hecht <ronald.hecht@gmx.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35788
2013-02-25 20:37:33 +00:00
Gabor Juhos
bcac3c5569
ar71xx: fix MAC address assignment on the DIR-825-Bx boards
...
Use the same MAC addresses as the original firmware.
Based on a patch from #10421 .
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Tested-by: Gabor Varga <vargagab@gmail.com>
SVN-Revision: 35730
2013-02-21 17:58:21 +00:00
Gabor Juhos
cf2324fd6b
ar71xx: add support for 3.8
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35728
2013-02-21 17:47:15 +00:00
Jonas Gorski
b91eab631b
ar71xx: print image build warnings/errors to stderr
...
Makes warnings/errors visible when building with V=w/V=1.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 35719
2013-02-21 11:45:29 +00:00
Gabor Juhos
4341b11f3e
ar71xx: remove __dev{init,exit} annotations from kernel files
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35687
2013-02-19 20:52:06 +00:00
Gabor Juhos
f6691c09c1
ar71xx: migrate to common led helper functions
...
[juhosg: migrate to status_led_blink_{preinit,failsafe} helpers]
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35650
2013-02-18 09:56:27 +00:00
Gabor Juhos
3f749d1e8e
kernel: update linux 3.7 to 3.7.9
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35644
2013-02-17 21:32:42 +00:00
Gabor Juhos
4215b1c93c
ar71xx: add user-space support for the Mikrotik RB951G board
...
[juhosg: change rb-951g to rb-951g-2hnd in the scripts]
Patchwork: http://patchwork.openwrt.org/patch/3257/
Signed-off-by: Kamil Trzcinski <ayufan@ayufan.eu>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35634
2013-02-17 10:08:41 +00:00
Gabor Juhos
7a709573d7
ar71xx: add kernel support for the Mikrotik RB951G board
...
This is platform definition for the RB951G device. It's mostly rework
of RB2011UAS patchset with network taken from the RB751 patches.
The main difference is the flash layout used by this device.
[juhosg:
- remove dead code from mach-rb951g
- add "-2HnD" suffix to the machine name
- use a separate 615-MIPS-ath79-RB951G-support.patch]
Patchwork: http://patchwork.openwrt.org/patch/3257/
Signed-off-by: Kamil Trzcinski <ayufan@ayufan.eu>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35633
2013-02-17 10:08:35 +00:00
Gabor Juhos
17c36f540c
ar71xx: fix kmod-usb2 package name
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35629
2013-02-16 17:33:06 +00:00
Gabor Juhos
162b8e23a5
kernel: update linux 3.7 to 3.7.8
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35604
2013-02-15 07:36:15 +00:00
Gabor Juhos
7484006498
ar71xx: fix factory image creation for dir-825-c1
...
Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35589
2013-02-13 16:36:26 +00:00
Gabor Juhos
5f10ec3c36
ar71xx: fix switch-config for dir-825-c1
...
Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35588
2013-02-13 16:36:23 +00:00
Gabor Juhos
bae4bfe3f8
kernel: update linux 3.7 to 3.7.7
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35571
2013-02-12 09:51:11 +00:00
Gabor Juhos
1f9ede9cfc
ar71xx: add script for automatic switch name migration
...
Thanks to Jonas Gorski for the help.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35567
2013-02-11 21:41:16 +00:00
Felix Fietkau
2e7a4b088d
ar71xx: allow unknown multicast frames to pass to the CPU on AR934x
...
SVN-Revision: 35564
2013-02-11 18:59:05 +00:00
Gabor Juhos
94806a13af
ar71xx: use switchX names in network configuration
...
Accessing the AR8xxx switches via the name of the
attached ethernet device is not possible since
r35560. Change the uci-defaults script to use
switchX names in switch configurations.
Reported-by: Jonas Gorski <jogo@openwrt.org>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35561
2013-02-11 16:54:52 +00:00
Jonas Gorski
f07a33afc2
ar71xx: register the micro sd card reader on RB493G
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 35535
2013-02-10 12:31:38 +00:00
Gabor Juhos
6ff973bdda
ar71xx: Routerboard 751 Mac Address Offset Fix
...
We utilize many Routerboard 751's and discovered that our latest batch
of RB751's would not initialize the wireless radio. We have determined
Mikrotik has changed where the mac address was located inside hardconfig.
As such we utilize "routerboot_find_tag" to find the location of the mac
address. We should remove "RB751_MAC_ADDRESS_OFFSET" as it is ambiguous
by machine manufacturing date. The newer batch of RB751's that we received
had a RB751_MAC_ADDRESS_OFFSET 0x10.
Signed-off-by: Davey Hutchison <dhutchison@bluemesh.net>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35519
2013-02-08 09:34:53 +00:00
Gabor Juhos
08ff976720
kernel: update linux 3.7 to 3.7.6
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35476
2013-02-04 10:02:56 +00:00
Gabor Juhos
b1168e70d3
ar71xx: use backported PCI_MEM_SIZE patches
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35470
2013-02-02 18:17:58 +00:00
Gabor Juhos
b9b341f05a
ar71xx: rename ar933x_uart patch
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35469
2013-02-02 18:17:53 +00:00
Gabor Juhos
7c87d28054
ar71xx: fixes whitespaces for dir-825-c1
...
Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35455
2013-02-02 15:02:19 +00:00
Gabor Juhos
9a438b2271
ar71xx: build images for the TP-LINK TL-WR743ND v2
...
AR9331 based, these same as 741v4
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35449
2013-02-02 10:01:15 +00:00
Gabor Juhos
31af0dc186
ar71xx: fix mac address calculation on the OpenMesh MR600
...
Signed-off-by: Marek Lindner <marek@open-mesh.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35446
2013-02-02 08:47:41 +00:00
Gabor Juhos
6805275fdc
ar71xx: sysupgrade - fix OpenMesh MR600 total flash size
...
Signed-off-by: Marek Lindner <marek@open-mesh.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35433
2013-02-01 15:50:54 +00:00
Gabor Juhos
979676ffcc
ar71xx: add sysupgrade support for OpenMesh MR600v2
...
Signed-off-by: Marek Lindner <marek@open-mesh.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35430
2013-02-01 15:50:47 +00:00
Gabor Juhos
2af995ba1d
ar71xx: add user-space support for OpenMesh MR600v2
...
Signed-off-by: Marek Lindner <marek@open-mesh.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35429
2013-02-01 15:50:45 +00:00
Gabor Juhos
8837d3a49b
ar71xx: add kernel support for the OpenMesh MR600v2
...
Signed-off-by: Marek Lindner <marek@open-mesh.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35428
2013-02-01 15:50:42 +00:00
Gabor Juhos
150bb9d0b1
ar71xx: remove unused OpenMesh MR600 led definitions
...
Signed-off-by: Marek Lindner <marek@open-mesh.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35427
2013-02-01 15:50:39 +00:00
Gabor Juhos
fe3db74276
ar71xx: remove unused OpenMesh MR6000 platform code
...
Signed-off-by: Marek Lindner <marek@open-mesh.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35426
2013-02-01 15:50:37 +00:00
Gabor Juhos
492cbcdd6b
ar71xx: build image for the TL-WDR3500 board
...
Based on http://patchwork.openwrt.org/patch/3208/
Thanks-to: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Gui Iribarren <gui@altermundi.net>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35425
2013-02-01 15:50:34 +00:00
Gabor Juhos
119dc460a3
ar71xx: add user-space support for TL-WDR3500 board
...
Based on http://patchwork.openwrt.org/patch/3208/
Thanks-to: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Gui Iribarren <gui@altermundi.net>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35424
2013-02-01 15:50:32 +00:00
Gabor Juhos
5bd02ca895
ar71xx: add kernel support for the TL-WDR3500 board
...
WDR3500 is similar to WDR3600 except it doesn't have gigabit ethernet,
and has only 1 USB port.
Pending issues:
* Leds are not working at all (except power and wlan_5g)
* LAN switch ethernet ports are reversed with respect to case label.
[Label] -> soft device
[LAN1] -> eth0.4
[LAN2] -> eth0.3
[LAN3] -> eth0.2
[LAN4] -> eth0.1
Based on http://patchwork.openwrt.org/patch/3208/
Thanks-to: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Gui Iribarren <gui@altermundi.net>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35423
2013-02-01 15:50:29 +00:00
Gabor Juhos
f7ff677169
ar71xx: add profile and build image for dir-825-c1
...
Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35403
2013-01-29 22:50:57 +00:00
Gabor Juhos
2a5193308f
ar71xx: add user space support for dir-825-c1
...
[juhosg: fix whitespaces in some scripts]
Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35402
2013-01-29 22:50:54 +00:00
Gabor Juhos
800da21cb1
ar71xx: add kernel support for dir-825-c1
...
[juhosg:
- remove unused GPIO stuff
- use a separate kernel patch for machine integration]
Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35401
2013-01-29 22:50:50 +00:00
Gabor Juhos
da9a704e92
ar71xx: add profile and generate images for the AP132 board
...
Based on http://patchwork.openwrt.org/patch/3162/
Signed-off-by: Embedded Wireless GmbH <info at embeddedwireless.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35397
2013-01-29 19:12:34 +00:00
Gabor Juhos
5d4ddbce72
ar71xx: add user-space support for the AP132 board
...
Based on http://patchwork.openwrt.org/patch/3162/
Signed-off-by: Embedded Wireless GmbH <info at embeddedwireless.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35396
2013-01-29 19:12:32 +00:00
Gabor Juhos
5ca187570f
ar71xx: add kernel support for Atheros AP132 Reference Board
...
Based on http://patchwork.openwrt.org/patch/3162/
Signed-off-by: Embedded Wireless GmbH <info at embeddedwireless.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35395
2013-01-29 19:12:30 +00:00
Gabor Juhos
8a9d92f125
ar71xx: fix ethernet device registration for the QCA9556 SoC
...
Based on http://patchwork.openwrt.org/patch/3162/
Signed-off-by: Embedded Wireless GmbH <info at embeddedwireless.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35394
2013-01-29 19:12:28 +00:00
Gabor Juhos
e9dbff1193
ar71xx: add kernel support for the QCA9556 SoC
...
Based on http://patchwork.openwrt.org/patch/3162/
Signed-off-by: Embedded Wireless GmbH <info at embeddedwireless.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35393
2013-01-29 19:12:26 +00:00
Gabor Juhos
df15e5cd61
ar71xx: enable fast flash read on dual-flash devices
...
This improves flash read speed on various Buffalo units.
mtd_speedtest results on the WZR-HP-AG300H:
old new delta
eraseblock read speed: 726 KiB/s 2068 KiB/s +184.85%
page read speed: 699 KiB/s 1973 KiB/s +182.26%
2 page read speed: 711 KiB/s 2043 KiB/s +187.34%
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35392
2013-01-29 19:12:25 +00:00
Gabor Juhos
562ba537fc
kernel: update linux 3.7 to 3.7.5
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35390
2013-01-29 18:29:45 +00:00
Gabor Juhos
22ce389e6a
ar71xx: add TP-LINK WA-801ND to run-time model detection
...
A small cosmetic fix to show the HW model name correctly in LuCI.
Patch-by: Amir Sagie <openwrt-devel@taproot.org.il>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35365
2013-01-29 09:40:29 +00:00
Felix Fietkau
ed7ca5d44e
kernel: clean up crypto related kconfig options
...
SVN-Revision: 35327
2013-01-27 17:23:12 +00:00
Felix Fietkau
8a1091ad53
ar71xx: disable support for unsupported mtd configuration, saves about 5K kernel size after lzma
...
SVN-Revision: 35326
2013-01-27 16:38:27 +00:00
Felix Fietkau
8933b918cd
kernel: use -ffunction-sections, -fdata-sections and --gc-sections on mips
...
in combination with kernel symbol export stripping this significantly reduces
the kernel image size
SVN-Revision: 35320
2013-01-26 16:26:13 +00:00
Gabor Juhos
15be1c9ee7
kernel: update linux 3.7 to 3.7.4
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35318
2013-01-24 17:08:37 +00:00
Felix Fietkau
8ce8960959
ar71xx: sync kernel sizes where possible to fix images for some devices ( #12874 )
...
SVN-Revision: 35309
2013-01-23 16:29:25 +00:00
Jo-Philipp Wich
3a2cccda2e
all targets: use numerically prefixed uci-defaults file names to better control order of execution
...
SVN-Revision: 35217
2013-01-18 12:42:53 +00:00
Gabor Juhos
0de21d9747
kernel: update linux 3.7 to 3.7.3
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35216
2013-01-18 11:44:42 +00:00
Felix Fietkau
1474359bd3
ar71xx: fix unaligned access in cls_u32
...
SVN-Revision: 35132
2013-01-13 16:48:23 +00:00
Felix Fietkau
e67b6ee395
ar71xx: fix unaligned access in a few more places
...
SVN-Revision: 35130
2013-01-13 15:37:58 +00:00
Felix Fietkau
b5bcbdfbb5
ar71xx: improve unaligned access patches, add a net_hdr_word() macro which assumes 2-byte aligned access and generates better code than {get,put}_unaligned_cpu32
...
SVN-Revision: 35129
2013-01-13 14:54:39 +00:00
Felix Fietkau
53e0ba49b9
ar71xx: avoid __packed define in the unaligned access hack patch, make the ipv6 address struct also 2-byte-aligned/packed
...
SVN-Revision: 35127
2013-01-13 13:06:09 +00:00
Felix Fietkau
764520975c
ar71xx: add more cpu feature overrides, slightly reduces kernel size
...
SVN-Revision: 35125
2013-01-13 11:33:48 +00:00
Felix Fietkau
310724c14d
ar71xx: extend the unaligned access hacks to a few more places that showed up in the new kernel
...
SVN-Revision: 35124
2013-01-13 11:33:44 +00:00
Gabor Juhos
eb2188c0e2
ar71xx: remove 3.6 support
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35114
2013-01-12 12:25:38 +00:00
Gabor Juhos
fe86bc9370
ar71xx: switch to 3.7
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35113
2013-01-12 12:25:36 +00:00
Gabor Juhos
ba4de984b9
ar71xx: disable PHY_SWAP and PHY_ADDR_SWAP bits on TL-WR703N/MR3020/MR3040/MR11U boards
...
The PHY_SWAP and PHY_ADDR_SWAP bits are initialized
differently by different versions of the bootloader.
This leads to broken ethernet connection with OpenWrt
on some boards.
Turn both SWAP bits OFF on these boards to make it
consistent regardless of the bootloader used.
Based on a patch by Michel Stempin <michel.stempin@wanadoo.fr>.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35037
2013-01-07 14:30:37 +00:00
Gabor Juhos
251e4608b0
ar71xx: add missing Makefile entry to the 74HC153 GPIO patch
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35035
2013-01-07 14:14:41 +00:00
Gabor Juhos
e1965a1d1a
ar71xx: register the NAND flash controller device on the AP135/136 boards
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34946
2013-01-01 13:10:41 +00:00
Gabor Juhos
66efec6783
ar71xx: allow to register the NAND flash controller on the QCA955x
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34945
2013-01-01 13:10:36 +00:00
Gabor Juhos
2c77e5d7b3
ar71xxx: allow to select ATH79_DEV_NFC for QCA955x
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34944
2013-01-01 13:10:34 +00:00
Gabor Juhos
d8446d65fe
ar71xxx: allow to build the ar934x_nfc driver for QCA955x
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34943
2013-01-01 13:10:29 +00:00
Gabor Juhos
93c322cacc
ar71xx: fix NAND controller base for QCA955x SoCs
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34942
2013-01-01 13:10:26 +00:00
Gabor Juhos
b57cc9a538
ar71xx: fold AP135 patch
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34941
2013-01-01 13:10:22 +00:00
Gabor Juhos
87271e9f28
ar71xx: add support for 3.7
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34920
2012-12-29 16:02:31 +00:00
Gabor Juhos
a3a6e0f039
ar71xx: Build the AP135 images
...
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34919
2012-12-29 16:02:28 +00:00
Gabor Juhos
dddf05bde2
ar71xx: Add userspace support for AP135
...
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34918
2012-12-29 16:02:27 +00:00
Gabor Juhos
1a379c5112
ar71xx: Add support for AP135
...
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34917
2012-12-29 16:02:24 +00:00
Gabor Juhos
c6580f64b8
ar71xx: use a backported patch to fix AR933x UART baud rate calculation
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34915
2012-12-29 13:52:38 +00:00
Felix Fietkau
348dc70c8c
ar71xx: change the unaligned access hack to assume an alignment of 2 bytes, slightly improves performance and code size
...
SVN-Revision: 34912
2012-12-28 21:30:24 +00:00
Felix Fietkau
41a039f464
mips: use -mno-branch-likely for kernel and userspace, saves ~11k kernel size after lzma and ~12k squashfs size in the default configuration
...
SVN-Revision: 34909
2012-12-28 19:17:19 +00:00
Gabor Juhos
f5b1cba606
ar71xx: build image for the AP136-020
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34886
2012-12-26 09:50:37 +00:00
Gabor Juhos
f3f05d86fe
ar71xx: add user-space support for AP136-020
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34885
2012-12-26 09:50:36 +00:00
Gabor Juhos
ed1889db33
ar71xx: add kernel support for the AP136-020 board
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34884
2012-12-26 09:50:34 +00:00
Gabor Juhos
c887a7fe4e
ar71xx: rename AP136 to AP136-010
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34883
2012-12-26 09:50:31 +00:00
Gabor Juhos
f8b4dfd172
ar71xx: dynamically set AR8327's PAD configuration on AP136
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34882
2012-12-25 18:45:32 +00:00
Gabor Juhos
1dc2b6e8fa
ar71xx: ag71xx: show PHY interface mode in dmesg
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34880
2012-12-25 18:45:29 +00:00
Gabor Juhos
64d31e6c6b
ar71xx: register the second ethernet interface on the AP136
...
Also fix the default network configuration
according to the new setup.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34854
2012-12-22 12:12:50 +00:00
Gabor Juhos
5dec87afef
ar71xx: fix ethernet device registration for QCA9558
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34853
2012-12-22 12:12:48 +00:00
Gabor Juhos
84a7051cef
ar71xx: rename QCA9558 ETH_CFG bit defines
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34852
2012-12-22 12:12:46 +00:00
Gabor Juhos
4085a5773d
ar71xx: fixup allowed PHY interface types for QCA9558
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34851
2012-12-22 12:12:44 +00:00
Gabor Juhos
f01a786825
ar71xx: don't assign any MII bus device on QCA9558 by default
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34850
2012-12-22 12:12:43 +00:00
Gabor Juhos
9edcd9d3a3
ar71xx: ag71xx: fix mii_bus_dev sanity check
...
The mii_bus device is not required if phy_mask is zero.
The driver will use a fixed connection if it is not
specified.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34849
2012-12-22 12:12:41 +00:00
Gabor Juhos
ad0f03d250
ar71xx: ag71xx: don't start/stop built-in switch w/o mii_bus_dev
...
Trying to do that causes a NULL pointer dereference:
CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 801d170c, ra == 801d18d4
Oops[#1 ]:
Cpu 0
$ 0 : 00000000 00000000 00000000 00000001
$ 4 : 00000000 802e6390 ffff8f45 00000001
$ 8 : 804b5360 ffffff80 802f93bc 00000000
$12 : 802f93e8 00000000 00000000 00000000
$16 : 8381aba0 8381aba0 00000000 00000000
$20 : 8295eff0 00000032 80000000 004101b8
$24 : 00000000 777265b0
$28 : 82936000 82937cf0 00420000 801d18d4
Hi : 00000000
Lo : 00000001
epc : 801d170c ar7240sw_reset+0x1c/0x19c
Tainted: G O
ra : 801d18d4 ag71xx_ar7240_start+0x28/0xc0
Status: 1100fc03 KERNEL EXL IE
Cause : 00800008
BadVA : 00000000
PrId : 00019750 (MIPS 74Kc)
Modules linked in: ath79_wdt ohci_hcd ledtrig_usbdev ledtrig_netdev
nf_nat_irc nf_nat_ftp nf_conntrack_irc nf_conntrack_ftp
ipt_MASQUERADE iptable_nat nf_nat pppoe xt_conntrack xt_CT xt_NOTRACK
iptable_raw xt_state nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack
ehci_hcd pppox ipt_REJECT xt_TCPMSS xt_LOG xt_comment xt_multiport
xt_mac xt_limit iptable_mangle iptable_filter ip_tables xt_tcpudp x_tab
les ppp_async ppp_generic slhc ath9k(O) ath9k_common(O) ath9k_hw(O)
ath(O) mac80211(O) usbcore usb_common nls_base crc_ccitt cfg80211(O) c
ompat(O) arc4 aes_generic crypto_blkcipher cryptomgr aead crypto_hash
crypto_algapi ledtrig_timer ledtrig_default_on leds_gpio gpio_button
_hotplug(O)
Process netifd (pid: 677, threadinfo=82936000, task=82cbe140, tls=77803750)
Stack : ffffffff 80087900 00000001 82937d74 8381aba0 8381aba0 00000000 00000000
8295eff0 801d18d4 8295eff0 801fa4a4 00420000 80092158 00000002 8381aba0
8381a800 00000000 00000080 801cf900 8027e720 00000000 00000000 8009223c
8381a800 8381a82c 8027e720 00000000 00000000 7f9d14f0 00420000 801ec08c
8381a800 801ebfb0 33000000 82937e30 00000001 8381a800 00001003 801ec348
...
Call Trace:
[<801d170c>] ar7240sw_reset+0x1c/0x19c
[<801d18d4>] ag71xx_ar7240_start+0x28/0xc0
[<801cf900>] ag71xx_open+0x1d0/0x258
[<801ec08c>] __dev_open+0xcc/0x130
[<801ec348>] __dev_change_flags+0xc0/0x160
[<801ec490>] dev_change_flags+0x20/0x6c
[<801ec5c8>] dev_ifsioc+0xec/0x348
[<801ecdb8>] dev_ioctl+0x594/0x67c
[<800ec00c>] do_vfs_ioctl+0x598/0x5ec
[<800ec0b0>] sys_ioctl+0x50/0x90
[<8006a3c4>] stack_done+0x20/0x40
Code: afbf0024 afb40020 afb10014 <8c910000> 00809021 24100104 24130704 8e440000 02002821
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34848
2012-12-22 12:12:40 +00:00
Gabor Juhos
a0b31f97bb
generic: ar8216: rename cpuport_cfg to port0_cfg in ar8327_platform_data
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34846
2012-12-22 12:12:35 +00:00
Gabor Juhos
e108cb91c0
ar71xx: rename fix-ar933x-reset patch
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34798
2012-12-20 14:13:16 +00:00
Mirko Vogt
e34a4e0c7b
Do not use deprecated path to functions.sh (/etc/functions.sh -> /lib/functions.sh)
...
SVN-Revision: 34793
2012-12-19 16:07:50 +00:00
Gabor Juhos
5f82aa4d15
ar71xx: merge machine patches
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34783
2012-12-19 08:50:45 +00:00
Gabor Juhos
cf99770800
ar71xx: build image for the TL-MR3220 v2
...
Based on the following patch:
http://patchwork.openwrt.org/patch/3043/
[juhosg: reorder MR3220 MultiProfile entry]
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34782
2012-12-19 08:50:44 +00:00
Gabor Juhos
b1b7aa674e
ar71xx: add user-space support for the TL-MR3220 v2
...
Based on the following patch:
http://patchwork.openwrt.org/patch/3043/
[juhosg: add uci-defaults/network support]
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34780
2012-12-19 08:50:41 +00:00
Gabor Juhos
0767605d17
ar71xx: add kernel support for the TL-MR3220 v2
...
Based on the following patch:
http://patchwork.openwrt.org/patch/3043/
[juhosg:
- remove custom LED and button arrays
- use separate machine specific patch
- update Kconfig]
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34779
2012-12-19 08:50:35 +00:00
Gabor Juhos
149534f3ed
ar71xx: image: add OpenMesh profile
...
It allows to build firmware images for all OpenMesh
products in one step.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34761
2012-12-18 15:16:05 +00:00
Gabor Juhos
44b9898251
kernel: update linux 3.6 to 3.6.11
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34748
2012-12-18 14:41:16 +00:00
Gabor Juhos
fc0da6852e
ar71xx: nuke 3.3 support
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34743
2012-12-17 22:28:09 +00:00
Gabor Juhos
61d715505c
ar71xx: add profile and build image for UniFi AP Pro
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34730
2012-12-17 12:28:21 +00:00
Gabor Juhos
abbd18776e
ar71xx: add user-space support for UniFi AP Pro
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34728
2012-12-17 12:28:11 +00:00
Gabor Juhos
ff3f28265f
ar71xx: add kernel support for the UniFi AP Pro
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34727
2012-12-17 12:28:02 +00:00
Gabor Juhos
2e2c88b625
ar71xx: reorder some patches
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34674
2012-12-14 07:16:56 +00:00
Gabor Juhos
34411a0cbd
ar71xx: merge unifi outdoor patch into the ubnt-xm one
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34673
2012-12-14 07:16:50 +00:00
Gabor Juhos
d085aad288
ar71xx: add profile and build initramfs image for the WNDR4300
...
It is not yet possible to use the default squasfsh/jffs2 images
on NAND flashes, so only initramfs image is supported for now.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34650
2012-12-12 16:49:52 +00:00
Gabor Juhos
dcdfcb75f0
ar71xx: add user-space support for the NETGEAR WNDR4300
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34649
2012-12-12 16:49:51 +00:00
Gabor Juhos
bc82db7d78
ar71xx: add kernel support for the NETGEAR WNDR4300
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34647
2012-12-12 16:49:49 +00:00
Gabor Juhos
75b71f4a74
ar71xx: add ap91_pci_init_simple helper
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34646
2012-12-12 16:49:48 +00:00
Gabor Juhos
d7cebac243
ar71xx: add ath79_wmac_register_simple helper
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34645
2012-12-12 16:49:47 +00:00
Gabor Juhos
ec26814b0e
ar71xx: refresh 3.3 patches
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34644
2012-12-12 16:49:46 +00:00
Gabor Juhos
cdfc300948
ar71xx: remove superfluous USB patches for 3.3
...
SVN-Revision: 34643
2012-12-12 16:49:43 +00:00
Gabor Juhos
2b378d11c8
kernel: update linux 3.6 to 3.6.10
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34639
2012-12-11 20:14:39 +00:00
Gabor Juhos
3cbc1a49e2
ar71xx: load ar934x_nfc driver earlier
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34589
2012-12-10 10:38:11 +00:00
Gabor Juhos
1f7ae58a2c
ar71xx: ar934x_nfc: allow to control DMA data swap via platform data
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34588
2012-12-10 10:38:07 +00:00
Gabor Juhos
2581173660
kernel: update linux 3.6 to 3.6.9
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34578
2012-12-08 15:01:33 +00:00
Gabor Juhos
47f9b2a110
ar71xx: TP-LINK also has a family TL-WDR
...
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34577
2012-12-07 19:10:57 +00:00
Gabor Juhos
d7ba2b4840
ar71xx: add profile and build image for TP-LINK TL-WA801N/ND
...
Patch-by: Amir Sagie <openwrt-devel@taproot.org.il>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34576
2012-12-07 19:10:56 +00:00
Gabor Juhos
4f5defdc3b
ar71xx: switch to 3.6.8
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34414
2012-11-29 17:53:42 +00:00
Gabor Juhos
c2f018fca2
remove common symbols from 3.6 configs
...
The removed symbols are present in the generic configuration.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34404
2012-11-29 15:21:41 +00:00
Gabor Juhos
1f516235ea
remove common symbols from 3.3 configs
...
The removed symbols are present in the generic configuration.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34403
2012-11-29 15:21:35 +00:00
Gabor Juhos
3a4d0ebd5c
kernel: update linux 3.6 to 3.6.8
...
Also refresh the affected patches.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34402
2012-11-29 07:42:19 +00:00
Gabor Juhos
b0b994cf76
ar71xx: set pad6 cfg for AR8327 on the AP136 board
...
Also override the pll_1000 value. Without these settings
ethernet suffers from packet loss.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34316
2012-11-23 20:55:34 +00:00
Gabor Juhos
188908e885
ar71xx: make rb750_nand driver compatible with 3.7
...
Also add compatibility patches for the currently
supported kernels.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34279
2012-11-20 16:29:43 +00:00
Gabor Juhos
8194237789
ar71xx: make ar934x_nfc driver compatible with 3.7
...
Also add compatibility patches for the currently
supported kernels.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34278
2012-11-20 16:29:42 +00:00
Gabor Juhos
4468fd7ae4
ar71xx: refresh rb4xx_nand patch
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34277
2012-11-20 15:53:17 +00:00
Gabor Juhos
46a3b818b9
ar71xx: remove buffer verification reference from rb4xx_nand.c
...
It is a dead code.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34276
2012-11-20 14:40:22 +00:00
Gabor Juhos
674b91ce0e
ar71xx: fix GPIO function selection for AR934x
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34275
2012-11-20 14:27:17 +00:00
Gabor Juhos
d833ca527d
ar71xx: restore rb4xx kernel partition size to the original value
...
The new lzma compressed elf kernel image fits into
that, even on devices with large page NAND chips.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34274
2012-11-20 12:17:45 +00:00
Gabor Juhos
33a99ce46b
ar71xx: install lzma compressed elf kernel image from wget2nand
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34273
2012-11-20 12:17:44 +00:00
Gabor Juhos
68b5aa2fdf
ar71xx/image: provide lzma compressed elf kernel image
...
This will be used on the RB4xx/RB7xx/RB2011 boards.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34272
2012-11-20 12:17:43 +00:00
Gabor Juhos
97867f8717
ar71xx/image: relink loader.elf image to LOADADDR
...
This allows to load the resulting image directly
from RouterBOOT.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34271
2012-11-20 12:17:41 +00:00
Gabor Juhos
8e4cefc7f8
refresh all kernel configurations
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34267
2012-11-20 07:19:06 +00:00
Gabor Juhos
d577d69838
ar71xx: use custom LZMA dictionary size for WNDR3700 images
...
Based on a patch by Hannu Nyman.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34248
2012-11-18 20:25:13 +00:00
Gabor Juhos
169e596268
ar71xx: add user-space support for the RB435G board
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34240
2012-11-18 10:18:02 +00:00
Gabor Juhos
d44d954dec
ar71xx: add kernel support for the RB435G board
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34239
2012-11-18 10:18:01 +00:00
Gabor Juhos
d62bddc620
ar71xx: update PCI IRQ map for RB4xx devices
...
Should fix #12269 .
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34238
2012-11-18 09:51:04 +00:00
Gabor Juhos
31881357af
ar71xx: create profile and build image for the OpenMesh MR600 board
...
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34237
2012-11-18 09:32:41 +00:00
Gabor Juhos
9da2c85b67
ar71xx: enable sysupgrade for the OpenMesh MR600
...
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34235
2012-11-18 09:32:39 +00:00
Gabor Juhos
6380301d01
ar71xx: rename om2p.sh upgrade script to openmesh.sh
...
It will be used on other boards as well.
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34234
2012-11-18 09:32:37 +00:00
Gabor Juhos
d325e622d2
scripts/om-fwupgradecfg-gen.sh: add support for the MR600
...
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34233
2012-11-18 09:32:36 +00:00
Gabor Juhos
c3174179b7
ar71xx: add user-space support for the OpenMesh MR600 board
...
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34232
2012-11-18 09:32:35 +00:00
Gabor Juhos
8d4857d677
ar71xx: add kernel support for the OpenMesh MR600 board
...
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34231
2012-11-18 09:32:33 +00:00
Gabor Juhos
7da001d068
scripts: rename om2p-fwupgradecfg-gen.sh to more generic om-fwupgradecfg-gen.sh
...
It will be used for non OM2P boards as well.
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34200
2012-11-14 14:18:33 +00:00
Gabor Juhos
ee94ed4597
ar71xx: add profile and build image for the Ubiquiti UniFi AP-Outdoor board
...
Signed-off-by: Daniel Dickinson <daniel@powercloudsystems.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34198
2012-11-13 20:57:19 +00:00
Gabor Juhos
9c5c079329
ar71xx: add user-space support for the Ubiquiti UniFi AP-Outdoor board
...
Signed-off-by: Daniel Dickinson <daniel@powercloudsystems.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34197
2012-11-13 20:57:18 +00:00
Gabor Juhos
75c1d3ccc2
ar71xx: add support for the Ubiquiti UniFi AP-Outdoor device
...
[juhosg:
- rename and refresh 660-MIPS-ath79-ubnt-xm-add-unifi-outdoor patches
- wrap long lines in mach-ubnt-xm
- remove default network config, set it from uci-defaults/network
instead
- remove user-space, and image generation stuff]
Signed-off-by: Daniel Dickinson <daniel@powercloudsystems.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34196
2012-11-13 20:57:17 +00:00
Gabor Juhos
7ab0e1566f
ar71xx: add profiles and build images for old PowerCloud System devices
...
[juhosg:
- use 'PowerCloud Systems' instead of 'PCS' in the profiles
- sort SingleProfile instances in image/Makefile]
Signed-off-by: Daniel Dickinson <daniel@powercloudsystems.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34195
2012-11-13 20:57:15 +00:00
Gabor Juhos
62c8ff19ad
ar71xx: add profile and build image for the TL-WA7510N board
...
[juhosg: separated from the http://patchwork.openwrt.org/patch/2820/ patch]
Signed-off-by: Stefan Helmert <helst_listen@aol.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34190
2012-11-13 14:48:03 +00:00
Gabor Juhos
165b7d2173
ar71xx: user space support for the TL-WA7510N
...
[juhosg: separated from the http://patchwork.openwrt.org/patch/2820/ patch]
Signed-off-by: Stefan Helmert <helst_listen@aol.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34188
2012-11-13 14:48:01 +00:00
Gabor Juhos
91bab828aa
ar71xx: add support for TP-Link TL-WA7510N
...
It is mostly the same as TL-WA901N. WLAN and LAN
are working. LAN LED is working. WLAN signal
strength LEDs are not working yet.
http://wiki.openwrt.org/toh/tp-link/tl-wa7510n?s[]=wa7510n
[juhosg:
- cleanup commit message
- move non kernel related stuff into separate changes
- rename and refresh 615-MIPS-ath79-TL-WA7510N-v1-support patch
- merge WA7510N support into the mach-tl-wa901nd.c file
- add 3.6 support]
Signed-off-by: Stefan Helmert <helst_listen@aol.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34187
2012-11-13 14:48:00 +00:00
Gabor Juhos
ce9d4fadfa
ar71xx: refresh patches
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34186
2012-11-13 14:47:58 +00:00
Gabor Juhos
e92da5e7ae
ar71xx: nuke ath79_set_usb_power_gpio helper
...
It is no longer used.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34088
2012-11-05 13:23:28 +00:00
Gabor Juhos
f2528b1792
ar71xx: use gpio_request_one instead of ath79_set_usb_power_gpio
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34087
2012-11-05 13:23:27 +00:00
Gabor Juhos
ed35253f4c
ar71xx: don't use the unknown LED on the ZCN-1523-5 board
...
According to #12421 , GPIO 1 controls the power
output on the unused lines of the LAN2 port.
Remove the LED definition in order to prevent
possible permanent hardware damage.
If someone needs that, the power-out feature can
be controlled via the GPIO sysfs interface.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34076
2012-11-04 22:08:54 +00:00
Gabor Juhos
1b744e1ca5
ar71xx: include mtd layout in the command line for ZCN-1523H-* boards
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34074
2012-11-04 21:12:20 +00:00
Gabor Juhos
b78a736dc2
ar71xx: add missing Makefile entry for the ZCN-1523H-{2,5} boards
...
Also add the missing ATH79_MACH_ZCN_1523H_5 symbol.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34072
2012-11-04 20:15:18 +00:00
Gabor Juhos
7228a91a3b
ar71xx: fix link speed between AR7242 and AR8327 on the RB750GL/RB751G boards
...
The default pll_1000 value had to be changed
in order to make it working.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33993
2012-10-29 17:24:30 +00:00
Gabor Juhos
e4db63fd64
ar71xx: add initial support for 3.6
...
The nand subtarget is not working yet.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33983
2012-10-28 19:52:02 +00:00
Gabor Juhos
a6549ac1cb
ar71xx: remove NO_AUTOINCR flag from the NAND drivers
...
The flag is not present in 3.6.
Also add compatibility patches for 3.3.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33971
2012-10-28 12:21:15 +00:00
Gabor Juhos
e2ec99889e
ar71xx: ag71xx: fix build_skb arguments for 3.6
...
Also add a compatibility patch for 3.3
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33969
2012-10-27 17:11:06 +00:00
Gabor Juhos
3a86affcdd
ar71xx: enable sysupgrade for the CAP4200AG board
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33960
2012-10-27 08:55:42 +00:00
Gabor Juhos
e99d557c08
ar71xx: add profile and build image for the CAP4200AG
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33958
2012-10-27 08:55:40 +00:00
Gabor Juhos
9287e0c863
ar71xx: add user-space part for the CAP4200AG
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33957
2012-10-27 08:55:39 +00:00
Gabor Juhos
d54c9653e9
ar71xx: add support for the Senao CAP4200AG board
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33956
2012-10-27 08:55:38 +00:00
Gabor Juhos
3b7cb4eb4a
ar71xx: add ath79_wmac_disable_[25]ghz helpers
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33955
2012-10-27 08:55:37 +00:00
Gabor Juhos
269872fe1e
ar71xx: use mtd_read in wrt160nl_part
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33951
2012-10-27 07:57:58 +00:00
Gabor Juhos
973eda6077
ar71xx: use mtd_read in tplinkpart
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33950
2012-10-27 07:57:57 +00:00
Gabor Juhos
28f3adc2ed
ar71xx: generate 4,8,16M images for the WPE72
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33949
2012-10-27 07:57:55 +00:00
Gabor Juhos
ff481a5518
ar71xx: reject TP-Link images containing a bootloader
...
The original TP-Link firmware images can be flashed via
the sysupgrade command, however those may contain a
bootloader. Flashing such an image via sysupgrade
bricks the board, and it can't be recovered without
a serial console.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33944
2012-10-26 18:58:13 +00:00
Gabor Juhos
f1f388d527
ar71xx: rw2458n - fix flash parts
...
See #12338 . Redwave rw2458 has uboot, not redboot.
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33867
2012-10-19 18:32:49 +00:00
Gabor Juhos
7a72f01a72
ar71xx: merge machine support patches
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33820
2012-10-17 18:27:50 +00:00
Gabor Juhos
2e1bc1e15b
ar71xx: also use the ath79_set_ar934x_eth_cfg helper for DB120
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33819
2012-10-17 18:27:48 +00:00
Gabor Juhos
31387947c8
ar71xx: use the ath79_set_ar934x_eth_cfg helper in machine setup routines
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33818
2012-10-17 18:27:47 +00:00
Gabor Juhos
5ffc08e3dc
ar71xx: add a helper function for setting up ETH_CFG register on AR934x
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33817
2012-10-17 18:27:45 +00:00
Gabor Juhos
35a91a4fe8
ar71xx: OM2P-HS sysupgrade support
...
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33803
2012-10-17 08:26:05 +00:00
Gabor Juhos
c5a32cfc92
ar71xx: add support for the OpenMesh OM2P-HS board
...
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33800
2012-10-17 08:26:01 +00:00
Gabor Juhos
f1283d8583
ar71xx: fix sysupgrade for jjPlus JWAP003
...
[juhosg: change commit message]
Signed-off-by: Artur Wronowski <arteqw@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33769
2012-10-14 16:24:26 +00:00
Gabor Juhos
1944f7b916
ar71xx: ew-dorin: added ethernet switch configuration
...
Signed-off-by: embedded wireless GmbH <info at embeddedwireless.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33768
2012-10-14 16:24:25 +00:00
Gabor Juhos
62ab2b0da6
ar71xx: unbreak building images for OpenMesh OM2P/OM2P-LC
...
Commit r33248 introduced a regression by passing the board name plus
'board=' in the third argument. The board name string has to be put
into the image as identifier of the image type.
[juhosg: fix OpenMesh template instead of use of string substitution]
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33767
2012-10-14 16:24:22 +00:00
Gabor Juhos
befb648642
ar71xx: build image for the TL-WR841N/ND v8
...
SVN-Revision: 33623
2012-10-04 20:16:06 +00:00
Gabor Juhos
02a85dfd85
ar71xx: user-space support for TL-WR841N/ND v8
...
SVN-Revision: 33622
2012-10-04 20:16:05 +00:00
Gabor Juhos
196c6c5b45
ar71xx: add support for the TL-WR841N/ND v8 board
...
SVN-Revision: 33621
2012-10-04 20:16:03 +00:00
Gabor Juhos
170cd7a19a
ar71xx: avoid possible NULL pointer dereference in ath79_init_{,local}_mac
...
SVN-Revision: 33575
2012-09-27 20:05:42 +00:00
Gabor Juhos
ffc0ea6c5d
ar71xx: create 'fat' images for the DIR-825/TEW-673GRU boards
...
With these images, it is possible to use the 'unused'
partition of the flash. The 'fat' images can be installed
with the sysupgrade command. When a 'fat' image is
installed from a regular one, the platform specific
sysupgrade script copies the calibration data to the
end of the flash. Likewise, when a regular image is
installed from the 'fat' version the sysupgrade script
copies the calibration data back to the original location.
SVN-Revision: 33540
2012-09-25 12:57:41 +00:00