mirror of https://github.com/hak5/openwrt-owl.git
ar71xx: add kernel support for dir-825-c1
[juhosg: - remove unused GPIO stuff - use a separate kernel patch for machine integration] Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35401owl
Gabor Juhos
parent
316f53d066
commit
800da21cb1
|
|
@ -39,6 +39,7 @@ CONFIG_ATH79_MACH_DB120=y
|
|||
CONFIG_ATH79_MACH_DIR_600_A1=y
|
||||
CONFIG_ATH79_MACH_DIR_615_C1=y
|
||||
CONFIG_ATH79_MACH_DIR_825_B1=y
|
||||
CONFIG_ATH79_MACH_DIR_825_C1=y
|
||||
CONFIG_ATH79_MACH_EAP7660D=y
|
||||
CONFIG_ATH79_MACH_EW_DORIN=y
|
||||
CONFIG_ATH79_MACH_HORNET_UB=y
|
||||
|
|
|
|||
|
|
@ -0,0 +1,189 @@
|
|||
/*
|
||||
* D-Link DIR-825 rev. C1 board support
|
||||
*
|
||||
* Copyright (C) 2013 Alexander Stadler
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License version 2 as published
|
||||
* by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#include <linux/pci.h>
|
||||
#include <linux/phy.h>
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/ath9k_platform.h>
|
||||
#include <linux/ar8216_platform.h>
|
||||
|
||||
#include <asm/mach-ath79/ar71xx_regs.h>
|
||||
|
||||
#include "common.h"
|
||||
#include "dev-ap9x-pci.h"
|
||||
#include "dev-eth.h"
|
||||
#include "dev-gpio-buttons.h"
|
||||
#include "dev-leds-gpio.h"
|
||||
#include "dev-m25p80.h"
|
||||
#include "dev-spi.h"
|
||||
#include "dev-usb.h"
|
||||
#include "dev-wmac.h"
|
||||
#include "machtypes.h"
|
||||
|
||||
#define DIR825C1_GPIO_LED_BLUE_USB 11
|
||||
#define DIR825C1_GPIO_LED_ORANGE_POWER 15
|
||||
#define DIR825C1_GPIO_LED_BLUE_POWER 14
|
||||
#define DIR825C1_GPIO_LED_ORANGE_PLANET 19
|
||||
#define DIR825C1_GPIO_LED_BLUE_PLANET 18
|
||||
|
||||
#define DIR825C1_GPIO_BTN_RESET 17
|
||||
#define DIR825C1_GPIO_BTN_WPS 16
|
||||
|
||||
|
||||
#define DIR825C1_KEYS_POLL_INTERVAL 20 /* msecs */
|
||||
#define DIR825C1_KEYS_DEBOUNCE_INTERVAL (3 * DIR825C1_KEYS_POLL_INTERVAL)
|
||||
|
||||
#define DIR825C1_MAC0_OFFSET 0x4
|
||||
#define DIR825C1_MAC1_OFFSET 0x18
|
||||
#define DIR825C1_WMAC_CALDATA_OFFSET 0x1000
|
||||
#define DIR825C1_PCIE_CALDATA_OFFSET 0x5000
|
||||
|
||||
static struct gpio_led dir825c1_leds_gpio[] __initdata = {
|
||||
{
|
||||
.name = "d-link:blue:usb",
|
||||
.gpio = DIR825C1_GPIO_LED_BLUE_USB,
|
||||
.active_low = 1,
|
||||
}, {
|
||||
.name = "d-link:orange:power",
|
||||
.gpio = DIR825C1_GPIO_LED_ORANGE_POWER,
|
||||
.active_low = 1,
|
||||
}, {
|
||||
.name = "d-link:blue:power",
|
||||
.gpio = DIR825C1_GPIO_LED_BLUE_POWER,
|
||||
.active_low = 1,
|
||||
}, {
|
||||
.name = "d-link:orange:planet",
|
||||
.gpio = DIR825C1_GPIO_LED_ORANGE_PLANET,
|
||||
.active_low = 1,
|
||||
}, {
|
||||
.name = "d-link:blue:planet",
|
||||
.gpio = DIR825C1_GPIO_LED_BLUE_PLANET,
|
||||
.active_low = 1,
|
||||
}
|
||||
};
|
||||
|
||||
static struct gpio_keys_button dir825c1_gpio_keys[] __initdata = {
|
||||
{
|
||||
.desc = "reset",
|
||||
.type = EV_KEY,
|
||||
.code = KEY_RESTART,
|
||||
.debounce_interval = DIR825C1_KEYS_DEBOUNCE_INTERVAL,
|
||||
.gpio = DIR825C1_GPIO_BTN_RESET,
|
||||
.active_low = 1,
|
||||
}, {
|
||||
.desc = "wps",
|
||||
.type = EV_KEY,
|
||||
.code = KEY_WPS_BUTTON,
|
||||
.debounce_interval = DIR825C1_KEYS_DEBOUNCE_INTERVAL,
|
||||
.gpio = DIR825C1_GPIO_BTN_WPS,
|
||||
.active_low = 1,
|
||||
}
|
||||
};
|
||||
|
||||
static struct ar8327_pad_cfg dir825c1_ar8327_pad0_cfg = {
|
||||
.mode = AR8327_PAD_MAC_RGMII,
|
||||
.txclk_delay_en = true,
|
||||
.rxclk_delay_en = true,
|
||||
.txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
|
||||
.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
|
||||
};
|
||||
|
||||
static struct ar8327_led_cfg dir825c1_ar8327_led_cfg = {
|
||||
.led_ctrl0 = 0xc737c737,
|
||||
.led_ctrl1 = 0x00000000,
|
||||
.led_ctrl2 = 0x00000000,
|
||||
.led_ctrl3 = 0x0030c300,
|
||||
.open_drain = false,
|
||||
};
|
||||
|
||||
static struct ar8327_platform_data dir825c1_ar8327_data = {
|
||||
.pad0_cfg = &dir825c1_ar8327_pad0_cfg,
|
||||
.port0_cfg = {
|
||||
.force_link = 1,
|
||||
.speed = AR8327_PORT_SPEED_1000,
|
||||
.duplex = 1,
|
||||
.txpause = 1,
|
||||
.rxpause = 1,
|
||||
},
|
||||
.led_cfg = &dir825c1_ar8327_led_cfg,
|
||||
};
|
||||
|
||||
static struct mdio_board_info dir825c1_mdio0_info[] = {
|
||||
{
|
||||
.bus_id = "ag71xx-mdio.0",
|
||||
.phy_addr = 0,
|
||||
.platform_data = &dir825c1_ar8327_data,
|
||||
},
|
||||
};
|
||||
|
||||
static void dir825c1_read_ascii_mac(u8 *dest, u8 *src)
|
||||
{
|
||||
int ret;
|
||||
|
||||
ret = sscanf(src, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx",
|
||||
&dest[0], &dest[1], &dest[2],
|
||||
&dest[3], &dest[4], &dest[5]);
|
||||
|
||||
if (ret != ETH_ALEN)
|
||||
memset(dest, 0, ETH_ALEN);
|
||||
}
|
||||
|
||||
static void __init dir825c1_setup(void)
|
||||
{
|
||||
u8 *mac = (u8 *) KSEG1ADDR(0x1ffe0000);
|
||||
u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
|
||||
u8 tmpmac[ETH_ALEN];
|
||||
u8 mac1[ETH_ALEN], mac2[ETH_ALEN];
|
||||
|
||||
dir825c1_read_ascii_mac(mac1, mac + DIR825C1_MAC0_OFFSET);
|
||||
dir825c1_read_ascii_mac(mac2, mac + DIR825C1_MAC1_OFFSET);
|
||||
|
||||
ath79_gpio_output_select(DIR825C1_GPIO_LED_BLUE_USB, AR934X_GPIO_OUT_GPIO);
|
||||
|
||||
ath79_register_m25p80(NULL);
|
||||
|
||||
ath79_register_leds_gpio(-1, ARRAY_SIZE(dir825c1_leds_gpio),
|
||||
dir825c1_leds_gpio);
|
||||
ath79_register_gpio_keys_polled(-1, DIR825C1_KEYS_POLL_INTERVAL,
|
||||
ARRAY_SIZE(dir825c1_gpio_keys),
|
||||
dir825c1_gpio_keys);
|
||||
|
||||
ap9x_pci_setup_wmac_led_pin(0, 13);
|
||||
ap9x_pci_setup_wmac_led_pin(1, 32);
|
||||
|
||||
ath79_init_mac(tmpmac, mac1, 0);
|
||||
ath79_register_wmac(art + DIR825C1_WMAC_CALDATA_OFFSET, tmpmac);
|
||||
|
||||
ath79_init_mac(tmpmac, mac2, 0);
|
||||
ap91_pci_init(art + DIR825C1_PCIE_CALDATA_OFFSET, tmpmac);
|
||||
|
||||
ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0);
|
||||
|
||||
mdiobus_register_board_info(dir825c1_mdio0_info,
|
||||
ARRAY_SIZE(dir825c1_mdio0_info));
|
||||
|
||||
ath79_register_mdio(0, 0x0);
|
||||
|
||||
ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
|
||||
|
||||
/* GMAC0 is connected to an AR8327N switch */
|
||||
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
|
||||
ath79_eth0_data.phy_mask = BIT(0);
|
||||
ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
|
||||
ath79_eth0_pll_data.pll_1000 = 0x06000000;
|
||||
ath79_register_eth(0);
|
||||
|
||||
ath79_register_usb();
|
||||
}
|
||||
|
||||
MIPS_MACHINE(ATH79_MACH_DIR_825_C1, "DIR-825-C1",
|
||||
"D-Link DIR-825 rev. C1",
|
||||
dir825c1_setup);
|
||||
|
|
@ -0,0 +1,40 @@
|
|||
--- a/arch/mips/ath79/machtypes.h
|
||||
+++ b/arch/mips/ath79/machtypes.h
|
||||
@@ -39,6 +39,7 @@ enum ath79_mach_type {
|
||||
ATH79_MACH_DIR_615_C1, /* D-Link DIR-615 rev. C1 */
|
||||
ATH79_MACH_DIR_615_E4, /* D-Link DIR-615 rev. E4 */
|
||||
ATH79_MACH_DIR_825_B1, /* D-Link DIR-825 rev. B1 */
|
||||
+ ATH79_MACH_DIR_825_C1, /* D-Link DIR-825 rev. C1 */
|
||||
ATH79_MACH_EW_DORIN, /* embedded wireless Dorin Platform */
|
||||
ATH79_MACH_EW_DORIN_ROUTER, /* embedded wireless Dorin Router Platform */
|
||||
ATH79_MACH_EAP7660D, /* Senao EAP7660D */
|
||||
--- a/arch/mips/ath79/Kconfig
|
||||
+++ b/arch/mips/ath79/Kconfig
|
||||
@@ -283,6 +283,17 @@ config ATH79_MACH_DIR_825_B1
|
||||
select ATH79_DEV_M25P80
|
||||
select ATH79_DEV_USB
|
||||
|
||||
+config ATH79_MACH_DIR_825_C1
|
||||
+ bool "D-Link DIR-825 rev. C1 board support"
|
||||
+ select SOC_AR934X
|
||||
+ select ATH79_DEV_AP9X_PCI if PCI
|
||||
+ select ATH79_DEV_ETH
|
||||
+ select ATH79_DEV_GPIO_BUTTONS
|
||||
+ select ATH79_DEV_LEDS_GPIO
|
||||
+ select ATH79_DEV_M25P80
|
||||
+ select ATH79_DEV_USB
|
||||
+ select ATH79_DEV_WMAC
|
||||
+
|
||||
config ATH79_MACH_EW_DORIN
|
||||
bool "embedded wireless Dorin Platform support"
|
||||
select SOC_AR933X
|
||||
--- a/arch/mips/ath79/Makefile
|
||||
+++ b/arch/mips/ath79/Makefile
|
||||
@@ -55,6 +55,7 @@ obj-$(CONFIG_ATH79_MACH_DB120) += mach-
|
||||
obj-$(CONFIG_ATH79_MACH_DIR_600_A1) += mach-dir-600-a1.o
|
||||
obj-$(CONFIG_ATH79_MACH_DIR_615_C1) += mach-dir-615-c1.o
|
||||
obj-$(CONFIG_ATH79_MACH_DIR_825_B1) += mach-dir-825-b1.o
|
||||
+obj-$(CONFIG_ATH79_MACH_DIR_825_C1) += mach-dir-825-c1.o
|
||||
obj-$(CONFIG_ATH79_MACH_EW_DORIN) += mach-ew-dorin.o
|
||||
obj-$(CONFIG_ATH79_MACH_EAP7660D) += mach-eap7660d.o
|
||||
obj-$(CONFIG_ATH79_MACH_JA76PF) += mach-ja76pf.o
|
||||
Loading…
Reference in New Issue