Commit Graph

17344 Commits (97212262d5b9be333be439efacb6c66f664726a9)

Author SHA1 Message Date
Koen Vandeputte 4339e5ddb1 kernel: fix build error in mtdsplit driver
Add missing parentheses.
Fixes kernel build issue when using this driver.

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2017-02-07 11:39:11 +01:00
Koen Vandeputte 597ea08038 cns3xxx: use proper macro's for ID handling
Compiled & tested on cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2017-02-07 11:39:08 +01:00
Jo-Philipp Wich ea269c37b8 ar71xx/ipq806x/mediatek/mvebu: fix network defaults
After "73d923e base-files: emit tagged switch configuration by default"
some default network configurations are broken because the lan and wan
ifnames are forcibly set to untagged netdevs.

Adjust the offending set_interfaces_lan_wan() calls to use the proper
tagged device names.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-02-07 09:32:28 +01:00
Jo-Philipp Wich 62bf0d4958 arc770: fix broken upstream change
Add a patch to revert upstream commit 9aed02feae57bf7a40cb04ea0e3017cb7a998db4
which introduces syntax errors.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-02-07 09:32:02 +01:00
Álvaro Fernández Rojas dab5a44067 brcm2708: update linux 4.4 patches to latest version
n
As usual these patches were extracted and rebased from the raspberry pi repo:
https://github.com/raspberrypi/linux/tree/rpi-4.4.y

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2017-02-06 22:24:42 +01:00
Rafał Miłecki 6b01f0f196 bcm53xx: set Netgear R8000 USB LEDs
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-02-06 20:24:19 +01:00
Rafał Miłecki fb18c3c8ff bcm53xx: refresh Linux 4.4 config
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-02-06 17:21:09 +01:00
Rafał Miłecki f24cb34239 bcm53xx: image: use one style of adding TARGET_DEVICES entries
It just makes code consistent. This trivial change may be a 17.01
candidate to provide simpler backporting experience.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-02-06 13:59:30 +01:00
Rafał Miłecki e991b0d741 kernel: merge b53 API patch with the one handling all switch drivers
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-02-06 13:39:45 +01:00
Felix Fietkau 91fce81df6 kernel: add missing config symbols for 4.9
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-02-06 11:56:57 +01:00
Felix Fietkau 478be1d371 kernel: fix crashlog build error on 4.9
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-02-06 11:56:57 +01:00
Felix Fietkau 9c18235b3a kernel: add compile fix for linux 4.9 on x86
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-02-06 11:56:57 +01:00
Rafał Miłecki b008357960 kernel: port b53 to use kernel 4.5+ API
For backward 4.4 compatibility I added patch reverting my changes.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-02-06 11:28:54 +01:00
Rafał Miłecki 26bc05eda9 bcm53xx: move bcm47xx_sprom driver to 4.4 specific directory
In kernel 4.9 it's already present so we don't want to overwite it (with
older & API incompatible version).

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-02-06 10:18:20 +01:00
Rafał Miłecki 2252627b0e bcm53xx: add Linux 4.9 patches
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-02-06 10:08:39 +01:00
Rafał Miłecki 75d48d80c7 bcm53xx: backport upstream DTS files for Linksys devices
We dont't build officialy images for them yet due to partitioning
issues.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-02-06 08:49:23 +01:00
Stijn Tintel d2c4041f02 kernel: update kernel 4.4 to version 4.4.47
Refresh patches for all targets that support kernel 4.4.
Compile-tested on all targets that use kernel 4.4 and aren't marked
broken, except arc770 and arch38 due to broken toolchain.

Runtime-tested on ar71xx, octeon, ramips and x86/64.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-02-06 03:23:06 +01:00
Kristian Evensen bb7068f26c ramips: add support for Sanlinking D240
The Sanlinking Technologies D240
(http://www.sanlinking.com/en/29-dual-4g-wifi-router.html) is basically the same
device as the ZBT WE826, so adding support for it in LEDE is straight forward.
The differences is that the D240 has two mini-PCIe slots (instead of one), blue
LEDs and supports PoE.

Specification:
* CPU: MT7620A
* 1x 10/100Mbps POE (802.3af/802.3at) Ethernet, 4x 10/100Mbps.
* 16 MB Flash.
* 128 MB RAM.
* 1x USB 2.0 port.
* 2x mini-PCIe slots.
* 2x SIM slots.
* 1x 2.4Ghz WIFI.
* 1x button.

Wifi, USB, switch and both mini-PCIe slots are working. I have not been able to
test the SD card reader.

The device comes pre-installed with an older version of OpenWRT, including Luci.
In order to install LEDE, you need to follow the existing procedure for updating
OpenWRT/LEDE using Luci. I.e., you need to access the UI and update the firmware
using the sysupgrade-image. Remember to select that you do not want to keep
existing settings. The default router address is 192.168.10.1 and
username/password admin/root (at least on my devices).

If you brick the device, the procedure for recovery is the same as for the
WE826. Please see the wiki page for that device for instructions.

Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com>
2017-02-05 22:23:28 +01:00
Felix Fietkau f791fb4af4 kernel: add linux 4.9 support
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Tim Harvey <tharvey@gateworks.com> [fixes]
2017-02-04 20:28:14 +01:00
Joseph C. Lehner 7d00cfe9bb build: centralize fakeroot code
This patch moves the fakeroot code required by some devices to
`image-commands.mk`.

Create the fakeroot on the fly by using the undocumented -s (skip copy)
parameter of mkimage.

Signed-off-by: Joseph C. Lehner <joseph.c.lehner@gmail.com>
[remove unused NETGEAR_KERNEL_MAGIC, remove workarounds to have a dummy
rootfs for mkimage]
Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-02-04 13:46:48 +01:00
Mathias Kresin c1eae7a7b8 ramips: fix Airlink AR725W device title
Gemtek is the ODM but the board was sold by Airlink101.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-02-04 13:46:48 +01:00
Mathias Kresin 1ba7fa652c ramips: fix Airlink AR725W factory image build
The factory image can't be bigger than 3328 KByte. If the image is
bigger than that, the gemtek-header tool throws an error and breaks
the build.

Make sure the output file to which the gemtek header should be added
exists and wasn't removed during the check-size step because of it
size. This will prevent hard errors in case the factory image is to big
similar to what is done for sysupgrade images.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-02-04 13:46:48 +01:00
Hannu Nyman c980147527 ipq806x: fix wireless macs
Commit 71a39b8 ("ipq806x: Fix wireless support for Netgear Nighthawk X4S
D7800") added a trailing TAB char after the backslash which prevents
the assignment of the correct MACs for wifi devices.

Fixes: FS#451

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
[reworded commit message]
Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-02-03 19:31:45 +01:00
Felix Fietkau 1a52d11d38 kernel: update phy drivers for 4.9
add backport patches for older kernels

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-02-03 12:35:44 +01:00
Felix Fietkau 402193baa1 kernel: update mtdsplit for linux 4.9
add backport patches for older kernels

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-02-03 12:35:44 +01:00
Rafał Miłecki 50efd403e6 bcm53xx: set WAN MAC address to don't share one with LAN interface
After analyzing numerous NVRAMs and vendor firmwares it seems the base
MAC address is used for LAN interface. WAN interface has different one
which sometimes is set directly in NVRAM and sometines needs to be
calculated.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-02-03 07:50:59 +01:00
Piotr Dymacz a4d12aed30 ar71xx: image: fix DEVICE_TITLE for several devices
Be consistent with form and format of the vendor names.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2017-02-03 05:10:14 +01:00
Piotr Dymacz c3ef8daff4 ar71xx: fix indentation in Kconfig.openwrt
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2017-02-03 05:10:14 +01:00
Piotr Dymacz cc1fb9662c ar71xx: drop help sections from Kconfig.openwrt
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2017-02-03 05:10:14 +01:00
Piotr Dymacz bed9729587 ar71xx: fix up mikrotik subtarget kernel config
Disable all devices which do not belong to the mikrotik subtarget.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2017-02-03 05:10:14 +01:00
Piotr Dymacz 670e14ed70 ar71xx: fix up nand subtarget kernel config
Disable all devices which do not belong to the nand subtarget.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2017-02-03 05:10:14 +01:00
Piotr Dymacz 4fe92554ac ar71xx: select ATH79_NVRAM only by boards actually use it
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2017-02-03 05:10:14 +01:00
Giuseppe Lippolis f9f636b94e rt5350: added pcm interface in .dtsi
Added the missing audio pcm interface in the .dtsi file for the rt5350
device. The update has been verified from the data get from the datasheet
and is very similar to the mt7620a.dtsi

Signed-off-by: Giuseppe Lippolis <giu.lippolis@gmail.com>
2017-02-03 05:10:13 +01:00
Mathias Kresin a0888ecbaf generic: rtl8366rb: fix compatible string
Use a vendor prefix as it has to be for all not core driver. Update the
compatible string in the device tree files accordingly.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-02-03 00:46:03 +01:00
Mathias Kresin 2c4d81310f ramips: fix Sercomm NA930 compatible string
The Sercomm NA930 is not a mt7620a evaluation board and shouldn't use
the eval board compatible string.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-02-03 00:46:03 +01:00
Mathias Kresin 2281f9929b ramips: remove Planex CS-QR10 sound device tree node
The comptible string is neither added by any LEDE patch nor exists in
in the kernel. Drop the sound node which was obviously added
accidentally with 9195d8da ("ramips: DTS rework").

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-02-03 00:45:55 +01:00
Mathias Kresin 05b1fcc70b ramips: cleanup SPI flash device tree properties usage
Use only the jedec,spi-nor compatible string. Everything else either
never worked or is only support to keep compatibility.

Remove the linux,modalias property. It is obsolete since kernel 4.4.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-02-02 22:48:54 +01:00
André Valentin 063d5a61e5 generic: mtd: update settings of mx25u3235f
This patch enabled 4K, dual and quad read. Settings have been verified with
a real device.

Signed-off-by: André Valentin <avalentin@marcant.net>
2017-02-02 22:48:54 +01:00
André Valentin 8725d1cffa ipq806x: fixup nbg6817 internal mmc and switch configuration in DTS
The setting mmc-ddr-1_8v in the platform dts leads to read errors. The
device is unusable and system reboots in a loop. Because NBG6817 is the
only mmc device, I removed it in base dts.

The second change removes settings now present in base dts.

The third change references was a wrong conversion of constants in the switch settings.
Switch now initializes again.

Signed-off-by: André Valentin <avalentin@marcant.net>
2017-02-02 22:48:33 +01:00
Koen Vandeputte 3becadd56c kernel: bump to 4.4.46
Refreshed patches for all supported targets.

Compile-tested on ar71xx, cns3xxx, imx6, mt7621, oxnas and x86/64.
Run-tested on ar71xx, cns3xxx, imx6 and mt7621.

Tested-by: Stijn Segers <francesco.borromini@inventati.org>
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2017-02-02 20:59:57 +01:00
Tobias Wolf bf2f09c005 ramips: Introduce CONFIG_MIPS_APPENDED_RAW_DTB to F5D8235 V1 (rt288x)
This activates the CONFIG_MIPS_APPENDED_RAW_DTB kernel configuration and
configures the F5D8235 V1 target to use append-dtb for kernel creation
instead of OWRTDTB.

Signed-off-by: Tobias Wolf <github-NTEO@vplace.de>
[Jo-Philipp Wich: rewrap commit message]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-02-02 00:13:49 +01:00
Tobias Wolf 4f86692953 ramips: Introduce CONFIG_MIPS_APPENDED_RAW_DTB to arch/mips/ralink
This commit introduces CONFIG_MIPS_APPENDED_RAW_DTB as an alternative to
OWRTDTB. Both solutions can be used concurrently until all board
configurations have been changed.

Signed-off-by: Tobias Wolf <github-NTEO@vplace.de>
[Jo-Philipp Wich: rewrap commit message]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-02-02 00:13:49 +01:00
Jo-Philipp Wich 770ac77cce brcm63xx: board.d: request untagged switch config where applicable
In order to prepare support for generating tagged switch configurations by
default, explicitely request untagged configs for boards which do not already
request tagging to retain default behaviour.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-02-02 00:13:49 +01:00
Rafał Miłecki 49f9c06fde kernel: fix BCM54612E PHY support
This backports upstream commit 62e13097c46c ("net: phy: broadcom: rehook
BCM54612E specific init")

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-02-01 20:55:22 +01:00
Felix Fietkau dabdd123c9 mt76: update to the latest version
Uses upstream code to parse DT supported band/frequency information.
Update existing .dts files to the new format and remove unnecessary
overrides.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-02-01 17:49:55 +01:00
Felix Fietkau 2340de62a6 ramips: remove DT pcie nodes for GL-MT300A/N
These devices don't have a secondary wifi chip

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-02-01 17:49:54 +01:00
Felix Fietkau 0f19c1d6cf rtl8366_smi: add linux 4.4 compatibility
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-02-01 17:49:54 +01:00
Felix Fietkau 71e86199ff lantiq: enable SMP for XRX200
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-02-01 17:49:01 +01:00
Rafał Miłecki 58221d79d9 bcm53xx: fix LAN MAC address for devices that use eth2 originally
We override default Ethernet interface with eth0 which often uses random
MAC due to missing proper NVRAM entry. Fix this by manually assigning
MAC in the config.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-02-01 15:26:40 +01:00
Mathias Kresin 726e45dfe9 mvebu: fix usb port leds
All mvebu boards have three USB LEDs. The first one is used for the
USB1 port.

There are two LEDs related to the second USB port. The top (bar) LED
gets bright in case any USB device is connected to the second USB port.

If the connected device is an USB 3 (SuperSpeed) device, the small dot
LED bellow the "bar" LED gets also bright.

While at it, use a name for the USB LEDs that matches the names printed
on the case.

Fixes: FS#423, FS#425

Signed-off-by: Kabuli Chana <newtownbuild@gmail.com>
Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-02-01 07:46:50 +01:00
Rafał Miłecki 6a853776a5 kernel: backport bgmac support for external PHYs
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-01-31 22:04:08 +01:00
Rafał Miłecki bde06ab26b kernel: use upstream accepted bgmac fix for BCM47186B0
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-01-31 22:04:08 +01:00
Rafał Miłecki 7583de2e8f kernel: rename bgmac patches to squeeze them
This is a pure rename without any changes. It makes maintaining bgmac
simpler and will hopefully make adding new kernel a bit easier.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-01-31 22:04:08 +01:00
Rafał Miłecki 12288d450b kernel: update bcma to fix devm memory leaks
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-01-31 14:31:13 +01:00
FUKAUMI Naoki 6b0b526a4f ramips: add support for Buffalo WCR-1166DS
Buffalo WCR-1166DS is a small wireless router with

 - MT7628AN + MT7612E
 - 64MiB DDR2 SDRAM
 - 16MiB SPI flash
 - 2T2R 11ac/a/b/g/n Wi-Fi
 - 2x 10/100M ethernet switch
 - 8x programmable LED
 - 3x button
 - UART pad on PCB (J2: 3.3V, GND, TX, RX)

factory image can be installed via stock web UI.

due to the "dual image" function in the bootloader, the second half of
the SPI flash ("firmware2" partition) cannot be used as a part of the
file system.

Signed-off-by: FUKAUMI Naoki <naobsd@gmail.com>
2017-01-31 11:10:58 +01:00
FUKAUMI Naoki 3b5d29b96e bcm53xx: build factory images for WZR-900DHP series
only factory images for DHP-EU and DHP2-JP (fw ver. 2.x) are built.

this will not work for DHP-JP/AP/TW (fw ver. 1.x) because they use
different buffalo_csum() formula.

Signed-off-by: FUKAUMI Naoki <naobsd@gmail.com>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-01-31 11:10:53 +01:00
Felix Fietkau bc32f7deb5 ramips: add missing DTS pcie node for WSR-600
Enables PCI bus and support for the MT7603 and RT5592 chips

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-31 10:27:38 +01:00
Felix Fietkau 727e244fae bcm53xx: suppress osafeloader info error messages during flashing
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-30 13:00:11 +01:00
Alexander Couzens 2711b94932 lantiq: fix unaligned access in xrx200_poll_rx()
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
2017-01-30 10:14:14 +01:00
Sergey Sergeev 74ea99b01d ledtrig-netdev: don't cancel work on events for different interfaces
This fixes logic bug(in function netdev_trig_notify) introduced in
0b2991a8ed commit.
Events triggered by different interfaces were stopping work queue so it
wasn't working for tx/rx mode.

Signed-off-by: Sergey Sergeev <adron@yapic.net>
2017-01-29 17:32:58 +01:00
Felix Fietkau 1533f1db92 ar71xx: add missing DEVICE_TITLE for mikrotik devices
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-29 17:32:48 +01:00
FUKAUMI Naoki e5a0eb2af5 ar71xx: prepare jffs2 partition properly in factory.bin for BHR-4GRV2
"pad-rootfs" is required just after "append-rootfs".

Signed-off-by: FUKAUMI Naoki <naobsd@gmail.com>
2017-01-28 20:29:00 +01:00
Michael Heimpold 8af38c7001 mxs: remove stale references to obsolete kernel module packages
Commit 29443e2 (mxs: remove modules.mk, select drivers in the kernel config)
missed to remove these references, so cleanup it now.

Signed-off-by: Michael Heimpold <mhei@heimpold.de>
2017-01-28 20:29:00 +01:00
Rafał Miłecki 5a164dd3c0 kernel: make BCM54210E PHY code work with 4.4
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-01-28 17:15:25 +01:00
Rafał Miłecki c437df09c9 kernel: backport BCM54210E PHY support
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-01-28 17:09:13 +01:00
Mathias Kresin 271db9f18e lantiq: fix brnImage signature for the VGV7510KW22BRN images
The VGV7510KW22BRN and VGV7519BRN do not have the same brnImage
signature. It was accidentally changed with ba42c1d ("lantiq: un-macro
the image building code").

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-01-28 12:44:41 +01:00
Koen Vandeputte 4d1515070b kernel: bump to 4.4.45
Refreshed patches for all supported targets.

Compiled & tested on cns3xxx & imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2017-01-27 23:17:49 +01:00
Mathias Kresin 893962bcf8 Revert "ar71xx: fix Archer C7 LED colour names"
This reverts commit e79ecb4c26.

The commit was incomplete and the issue that should be fixed isn't
that easy fixable. The Archer C7 mach file is used for the Archer C5,
WDR4900 and WDR7500 as well. Where the WDRs in compare to the Archer
do have blue LEDs.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-01-27 22:16:24 +01:00
Jo-Philipp Wich 475da81ec0 ixp4xx: put apex images into image staging directory
Do not put the apex images into the kernel build directory as this directory
might get removed after kernel updates while the apex packages InstallDev
recipe is not getting re-executed because it is still considered current,
leading to image build failures later on due to missing images.

To ensure that built bootloader images persist over kernel version updates in
the buildroot, put them into the new STAGING_DIR_IMAGE directory.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-01-27 16:53:31 +01:00
Jo-Philipp Wich e0579aecf8 mxs: put u-boot images into image staging directory
Do not put the u-boot images into the kernel build directory as this directory
might get removed after kernel updates while the u-boot packages InstallDev
recipe is not getting re-executed because it is still considered current,
leading to image build failures later on due to missing images.

To ensure that built bootloader images persist over kernel version updates in
the buildroot, put them into the new STAGING_DIR_IMAGE directory.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-01-27 16:53:31 +01:00
Jo-Philipp Wich 7f9d537f21 oxnas: put u-boot images into image staging directory
Do not put the u-boot images into the kernel build directory as this directory
might get removed after kernel updates while the u-boot packages InstallDev
recipe is not getting re-executed because it is still considered current,
leading to image build failures later on due to missing images.

To ensure that built bootloader images persist over kernel version updates in
the buildroot, put them into the new STAGING_DIR_IMAGE directory.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-01-27 16:53:31 +01:00
Jo-Philipp Wich cf3d1b61bf sunxi: put u-boot images into image staging directory
Do not put the u-boot images into the kernel build directory as this directory
might get removed after kernel updates while the u-boot packages InstallDev
recipe is not getting re-executed because it is still considered current,
leading to image build failures later on due to missing images.

To ensure that built bootloader images persist over kernel version updates in
the buildroot, put them into the new STAGING_DIR_IMAGE directory.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-01-27 16:53:31 +01:00
Jo-Philipp Wich c6502ce3bb layerscape: put u-boot and ucode images into image staging directory
Do not put the u-boot and ucode images into the kernel build directory as this
directory might get removed after kernel updates while the u-boot packages
InstallDev recipe is not getting re-executed because it is still considered
current, leading to image build failures later on due to missing images.

To ensure that built bootloader images persist over kernel version updates in
the buildroot, put them into the new STAGING_DIR_IMAGE directory.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-01-27 16:53:31 +01:00
Jo-Philipp Wich 237bd36135 mvebu: put u-boot images into image staging directory
Do not put the u-boot images into the kernel build directory as this directory
might get removed after kernel updates while the u-boot packages InstallDev
recipe is not getting re-executed because it is still considered current,
leading to image build failures later on due to missing u-boot images.

To ensure that built bootloader images persist over kernel version updates in
the buildroot, put them into the new STAGING_DIR_IMAGE directory.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-01-27 16:53:31 +01:00
Koen Vandeputte 6db7a013bd imx6: fix build error
This symbol is required when symbol SOC_IMX6 is also specified

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2017-01-27 16:51:44 +01:00
Koen Vandeputte d99007d5a9 imx6: refresh kernel config
This key got moved to generic in commit:
7480d3309c

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2017-01-27 16:11:34 +01:00
Felix Fietkau 7d985f0925 kernel: split up 980-arm_openwrt_machtypes.patch and move to target folders
This is only required for non-DT platforms

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-27 11:18:27 +01:00
Stijn Segers 20996edd68 Kernel: bump to 4.4.44
Bump kernel to 4.4.44. Compile-tested on ar71xx, ramips/mt7621 and x86/64.

.44 has been run-tested on the 17.01 branch here on ar71xx and mt7621.

Signed-off-by: Stijn Segers <francesco.borromini@inventati.org>
2017-01-27 11:18:27 +01:00
Chris Blake e3271d545d x86/64: Enable GPIO sysfs & GPIO LED support
The following changes enables GPIO sysfs as well as the LEDS_GPIO option
within the kernel. This is required to enable LEDs over a GPIO
interface.

Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
2017-01-27 11:18:27 +01:00
Joseph C. Lehner f93a121533 ramips: cleanup mt7620 Netgear image code
1. Reuse functions defined in `image-commands.mk`
2. Rename fakeroot image

Signed-off-by: Joseph C. Lehner <joseph.c.lehner@gmail.com>
2017-01-27 11:10:10 +01:00
Joseph C. Lehner aeba0fe466 build: move append-file to image-commands.mk
Move it append-file to image-commands.mk so that it can used by other
targets as well.

Signed-off-by: Joseph C. Lehner <joseph.c.lehner@gmail.com>
2017-01-27 11:10:10 +01:00
Tobias Wolf 99eb6f97e5 ramips: enable rlt8366s Green Feature for F5D8235 V1
Enable the green feature for the board by default.

Signed-off-by: Tobias Wolf <github-NTEO@vplace.de>
2017-01-27 11:10:10 +01:00
Tobias Wolf e2bd8b900f generic: rtl836x: add support for Green Feature
The GPL licensed source code of Belkin contains an ASIC based "Green
Feature". This change adds support for this Green Feature that can be
activated with an DTS option or swconfig.

Signed-off-by: Tobias Wolf <github-NTEO@vplace.de>
2017-01-27 11:10:10 +01:00
Tobias Wolf d43046e0f6 ramips: add rlt8366s initvals to the F5D8235 V1 DTS
Before this change only port 4 of F5D8235 V1 worked at 1000Mpbs.

Comparing the current driver with the GPL_BELKIN_F5D8235-4_v1000
v1.01.24 sources showed that additional steps are required to set-up
the rlt8366s switch correctly.

Signed-off-by: Tobias Wolf <github-NTEO@vplace.de>
2017-01-27 11:10:10 +01:00
Tobias Wolf 30494598f8 generic: rtl8366s: add support support for initvals from DTS
This change provides the possibility to define per-device initvals in
the DTS file for a rlt8366s switch.

Signed-off-by: Tobias Wolf <github-NTEO@vplace.de>
2017-01-27 11:10:10 +01:00
Mathias Kresin e79ecb4c26 ar71xx: fix Archer C7 LED colour names
All LEDs on this board are green.

Fixes: FS#409

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-01-27 11:10:10 +01:00
Yousong Zhou d5de9264bb generic: keep module aliases inside .modinfo
It seems module aliases are actually essential info.  E.g. other modules
may call xt_request_find_match(NFPROTO_IPV{4,6}, "hashlimit", 1) and the
kernel will request user mode modprobe helper for ipt_hashlimit and
ip6t_hashlimit respectively which are aliases of xt_hashlimit.ko

Compile-tested for armvirt, there is nearly no size impact.

Before

    -rw-r--r-- 1 yousong yousong     304 Jan 10 17:37 config.seed
    -rw-r--r-- 1 yousong yousong    1634 Jan 11 11:07 lede-armvirt-default.manifest
    -rw-r--r-- 1 yousong yousong 1533647 Jan 11 11:07 lede-armvirt-default-rootfs.tar.gz
    -rw-r--r-- 1 yousong yousong 1802711 Jan 11 11:07 lede-armvirt-root.ext4.gz
    -rw-r--r-- 1 yousong yousong 1544597 Jan 11 11:07 lede-armvirt-rootfs.cpio.gz
    -rw-r--r-- 1 yousong yousong 1174984 Jan 11 11:07 lede-armvirt-root.squashfs.gz
    -rwxr-xr-x 1 yousong yousong 1654712 Jan 11 11:07 lede-armvirt-zImage
    -rwxr-xr-x 1 yousong yousong 2738296 Jan 11 11:07 lede-armvirt-zImage-initramfs
    drwxr-xr-x 2 yousong yousong    4096 Jan 10 17:35 packages
    -rw-r--r-- 1 yousong yousong     739 Jan 10 17:37 sha256sums

After

    -rw-r--r-- 1 yousong yousong     304 Jan 10 17:37 config.seed
    -rw-r--r-- 1 yousong yousong    1634 Jan 11 11:10 lede-armvirt-default.manifest
    -rw-r--r-- 1 yousong yousong 1533646 Jan 11 11:10 lede-armvirt-default-rootfs.tar.gz
    -rw-r--r-- 1 yousong yousong 1802711 Jan 11 11:10 lede-armvirt-root.ext4.gz
    -rw-r--r-- 1 yousong yousong 1544593 Jan 11 11:10 lede-armvirt-rootfs.cpio.gz
    -rw-r--r-- 1 yousong yousong 1174984 Jan 11 11:10 lede-armvirt-root.squashfs.gz
    -rwxr-xr-x 1 yousong yousong 1654736 Jan 11 11:10 lede-armvirt-zImage
    -rwxr-xr-x 1 yousong yousong 2738144 Jan 11 11:10 lede-armvirt-zImage-initramfs
    drwxr-xr-x 2 yousong yousong    4096 Jan 10 17:35 packages
    -rw-r--r-- 1 yousong yousong     739 Jan 10 17:37 sha256sums

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2017-01-26 18:07:38 +01:00
Vitaly Chekryzhev 9a53e1bdf9 ramips: ZyXEL Keenetic Omni/Omni2: export gpio usb power
Export gpio usb to allow power management of USB port.

Signed-off-by: Vitaly Chekryzhev <13hakta@gmail.com>
2017-01-26 16:39:08 +01:00
Vitaly Chekryzhev 0352cc6b19 ramips: ZyXEL Keenetic Viva: align factory images
ZyXEL web-flasher requires squashfs to be aligned to 64kb.

Signed-off-by: Vitaly Chekryzhev <13hakta@gmail.com>
2017-01-26 16:39:08 +01:00
Vitaly Chekryzhev e8c265b2cc ramips: ZyXEL Keenetic Viva: export gpio usb power
Export gpio usb to allow power management of USB port.

Signed-off-by: Vitaly Chekryzhev <13hakta@gmail.com>
2017-01-26 16:39:08 +01:00
Yo Abe 21b4625135 ramips: add ip17xx support to WLI-TX4-AG300N
ramips/rt288x WLI-TX4-AG300N was missing support for its 100Mbit switch which
should be included by default.

Signed-off-by: Yo Abe <abe.geel@gmail.com>
[Jo-Philipp Wich: picked from OpenWrt PR#359, rewrap commit msg, fix Sob]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-01-26 14:41:31 +01:00
Joseph C. Lehner 0cc04d05f6 ramips: fix EX2700 wireless mac
On some EX2700 devices, the MAC address from the eeprom data differs
from the actual MAC address. Fix that, and cleanup the DTS file
while we're at it.

Signed-off-by: Joseph C. Lehner <joseph.c.lehner@gmail.com>
2017-01-26 13:53:57 +01:00
Rafał Miłecki f67b0276b6 kernel: update Broadcom PHY drivers
This commit adds 4 patches, one per kernel version that was used for
picking updates. This adds support for few new PHYs.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-01-26 12:24:09 +01:00
Henryk Heisig e39dc8d823 ar71xx: add support to TP-Link Archer C59v1 and C60v1
TP-Link Archer C59v1 is a dual-band AC1350 router, based on Qualcomm/Atheros
QCA9561+QCA9886.

Specification:

- 775/650/258 MHz (CPU/DDR/AHB)
- 128 MB of RAM (DDR2)
- 16 MB of FLASH (SPI NOR)
- 3T3R 2.4 GHz
- 2T2R 5 GHz
- 5x 10/100 Mbps Ethernet
- USB 2.0 port
- 8x LED (controled by 74HC595), 3x button
- UART header on PCB

TP-Link Archer C60v1 is a dual-band AC1350 router, based on Qualcomm/Atheros
QCA9561+QCA9886.

Specification:

- 775/650/258 MHz (CPU/DDR/AHB)
- 64 MB of RAM (DDR2)
- 8 MB of FLASH (SPI NOR)
- 3T3R 2.4 GHz
- 2T2R 5 GHz
- 5x 10/100 Mbps Ethernet
- 7x LED, 2x button
- UART header on PCB

Currently not working:
- Port LAN1 on C59, LAN4 on C60
- WiFi 5GHz (missing ath10k firmware for QCA9886 chip)
- Update from oficial web interface ( tplink-saveloader not support "product-info")

Flash instruction:
1. Set PC to fixed ip address 192.168.0.66
2. Download lede-ar71xx-generic-archer-cXX-v1-squashfs-factory.bin
and rename it to tp_recovery.bin
3. Start a tftp server with the file tp_recovery.bin in its root directory
4. Turn off the router
5. Press and hold Reset button
6. Turn on router with the reset button pressed and wait ~15 seconds
7. Release the reset button and after a short time
the firmware should be transferred from the tftp server
8. Wait ~30 second to complete recovery.

Flash instruction under U-Boot, using UART:

1. tftp 0x81000000 lede-ar71xx-...-sysupgrade.bin
2. erase 0x9f020000 +$filesize
3. cp.b $fileaddr 0x9f020000 $filesize
4. reset

Signed-off-by: Henryk Heisig <hyniu@o2.pl>
[Jo-Philipp Wich: remove duplicate ATH79_MACH_ARCHER_C59/C60_V1 entries]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-01-26 11:38:21 +01:00
Henryk Heisig eec0c41375 ar71xx: QCA956X: add missing register
Signed-off-by: Henryk Heisig <hyniu@o2.pl>
2017-01-26 11:38:20 +01:00
Qian Zheng b822f29f25 ar71xx: fix netgear wndr3700 v1/v2, wndr3800/wndr3800ch switch port mapping
Signed-off-by: Qian Zheng <sotux82@gmail.com>
2017-01-26 11:38:20 +01:00
Qian Zheng 3d4069fb8e ar71xx: fix netgear wnr2000 v3 switch port mapping
Signed-off-by: Qian Zheng <sotux82@gmail.com>
[Jo-Philipp Wich: fix alphabetical order after merging with gl-ar300 case]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-01-26 11:38:20 +01:00
Qian Zheng 810eb8d0ea ar71xx: fix tl-wr841n-v7 switch port mapping
Signed-off-by: Qian Zheng <sotux82@gmail.com>
[Jo-Philipp Wich: fix alphabetical order]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-01-26 11:38:20 +01:00
Rafał Miłecki 55ff15cfd5 bcm53xx: disable building Linksys EA6300 V1 image
This device has 2 TRX partitions (main one and failsafe one) and Linux
may not detect them properly failing to run userspace.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-01-25 10:50:27 +01:00
John Crispin a68f6942bc mediatek: update the ethernet compat string
mt2701 is an earlier version of the ip core, so use that compat string as
baseline.

Signed-off-by: John Crispin <john@phrozen.org>
2017-01-25 08:44:53 +01:00
Felix Fietkau b02c381b4b x86: fix sysupgrades on disks with 4k block size
Even when the disk uses 4k blocks, the partition table still uses units
of 512 byte sectors. Always use ibs=512 for the offsets

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-25 08:13:15 +01:00
Alex Samorukov d872b732e7 ar71xx: Fix mikrotik subtarget default profile for device profile selection
Signed-off-by: Alex Samorukov <samm@os2.kiev.ua>
2017-01-25 08:01:25 +01:00
Alex Samorukov 17401b3d5c ar71xx: improve Mikrotik hAP Lite device support
- remove CONFIG_MTD_SPI_NOR_USE_4K_SECTORS
- enable jffs2 support
- fix sysupgrade

Signed-off-by: Alex Samorukov <samm@os2.kiev.ua>
2017-01-25 08:00:11 +01:00
Felix Fietkau 07c9bde0da mxs: fix image build issues
stage u-boot images in KERNEL_BUILD_DIR for building images
always select uboot-mxs

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-25 07:48:43 +01:00
Rafał Miłecki 1a83d4d30f brcm47xx: backport arch patch with Luxul devices support
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-01-24 20:33:45 +01:00
Alberto Bursi 94676dd99d kirkwood: add ZyXEL NSA310b
The ZyXEL NSA310 device is a Kirkwood based NAS:

- SoC: Marvell 88F6702 1200Mhz
- SDRAM memory: 256MB DDR2 400Mhz
- Gigabit ethernet: Realtek (over pcie)
- Flash memory: 128MB
- 1 Power button
- 1 Power LED (blue)
- 5 Status LED (green/red)
- 1 Copy/Sync button
- 1 Reset button
- 2 SATA II port (1 internal and 1 external)
- 2 USB 2.0 ports (1 front and 1 back)
- Smart fan

The stock u-boot cannot read ubi so it should be replaced with the
LEDE/OpenWRT's u-boot or with a u-boot from here
https://github.com/mibodhi/u-boot-kirkwood

This device's boot ROM supports "kwboot" tool
(in mainline u-boot, built automatically if CONFIG_KIRKWOOD is declared)
that sends an uboot image to the board over serial connection, it is very easy to unbrick.

The stock bootloader can use usb and read from FAT filesystems,
so the installation process is simple, place the uboot file on a USB flashdrive
formatted as FAT (here it is "openwrt-kirkwood-nsa310.bin", then connect TTL
to the board and write the following commands in the bootloader console:

usb reset
fatload usb 0 0x1000000 openwrt-kirkwood-nsa310.bin
nand write 0x1000000 0x00000 0x100000
reset

Now you are rebooting in the new u-boot, write this in its console to install the firmware:

usb reset
fatload usb 0 0x2000000 lede-kirkwood-nsa310b-squashfs-factory.bin
nand erase.part ubi
nand write 0x2000000 ubi 0x600000

If your firmware file is bigger than 6 MiBs you should write its size in hex
instead of 0x600000 above, or remove that number entirely (it will take a while in this case).

If you are using another uboot that can read ubi, set mtdparts like this

mtdparts=mtdparts=orion_nand:0x00c0000(uboot),0x80000(uboot_env),0x7ec0000(ubi)

And set your bootcmd to be like this

bootcmd=run setenv bootargs; ubi part ubi; ubi read 0x800000 kernel; bootm 0x800000

Then you can install the firmware as described above.

After you installed (or configured) the u-boot for booting the firmware,
write the device's mac address in the ethaddr u-boot env.
The MAC address is usually on a sticker under the device (one of the two codes is the serial),
it should begin with "107BEF" as it is assigned to ZyXEL.

write in the u-boot console (use your MAC address instead of the example)

setenv ethaddr 10:7B:EF:00:00:00
saveenv

to save the mac address in the u-boot.

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
2017-01-24 16:21:25 +01:00
Hans Geiblinger a43c503ec4 mvebu: set fan_ctrl.sh only on mamba
Signed-off-by: Hans Geiblinger <cybrnook2002yahoo.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name> [cleanup]
2017-01-24 16:21:25 +01:00
Felix Fietkau e018c4d7ab uboot-sunxi: clean up, switch to u-boot.mk
Instead of referencing u-boot packages from device profiles and having a
-all metapackage, make the u-boot packages hidden (they don't install to
bin/ anyway), and name the files in KERNEL_BUILD_DIR appropriately

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-24 16:21:25 +01:00
Felix Fietkau 366c33962c uboot-mvebu: switch to u-boot.mk
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-24 16:21:24 +01:00
Felix Fietkau 83783f296a uboot-ar71xx: switch to using u-boot.mk
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-24 16:21:24 +01:00
Felix Fietkau ad85464f11 lantiq: remove CPU_TYPE:=mips32r2, it gets overwritten anyway
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-24 13:33:45 +01:00
Felix Fietkau f4f8f4a180 x86: unify CPU_TYPE for legacy and geode
According to some reports, -march=pentium-mmx is a better choice for
older Geode CPUs than -march=geode anyway.

Bump the minimum architecture of the legacy target from i486 to
pentium-mmx. Anything older is not worth supporting anyway.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-24 13:15:01 +01:00
Felix Fietkau 94b6dc3a43 uml: mark as source-only
Get rid of a special case in the buildbot script

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-24 13:15:01 +01:00
Felix Fietkau f781c8e11e malta: mark as source-only to avoid wasting build resources
The le64 and be64 subtargets do not share a package architecture with
any other targets, so they are pretty wasteful for a development-only
target.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-24 13:15:01 +01:00
Felix Fietkau 59a3108188 malta: move FEATURES to the target makefile
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-24 13:15:01 +01:00
Felix Fietkau bfdc56d3a2 build: remove mips16 feature flag from target makefiles
It can be implicitly derived from the MIPS32 revision support in the
kernel configuration

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-24 13:15:01 +01:00
Felix Fietkau e9405aa8fd ramips/rt288x: switch CPU_TYPE to 24kc
While rt288x only has a MIPS 4KEc processor, it implements the MIPS32r2
architecture just like the 24Kc, so the instruction set should be 100%
compatible.
Switching it to 24kc allows it to share the package architecture with a
lot of other targets instead of creating a special case, saving
buildbot resources.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-24 13:15:01 +01:00
John Crispin 236fcedc51 Revert "ar71xx: wrt400n: lift size limit on kernel and rootfs part"
This reverts commit 78c2ec0f47.

The builders were failing with a segfault when generating the image

Signed-off-by: John Crispin <john@phrozen.org>
2017-01-20 06:43:13 +01:00
YuheiOKAWA 261415a660 ar71xx: add support for PQI Air Pen
SoC: AR9331
Ethernet x1, Wireless 2.4G, uSD card slot x1.
USB Power, include Li-Po Battery.

Signed-off-by: YuheiOKAWA <tochiro.srchack@gmail.com>

Changes in v2:
alphabetical ordering, tabs fron spaces.
2017-01-20 00:52:48 +01:00
Yousong Zhou 78c2ec0f47 ar71xx: wrt400n: lift size limit on kernel and rootfs part
While at it, convert to new build method

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2017-01-20 00:44:46 +01:00
Conor O'Gorman 274546046d ar71xx: add Abicom SC1750 support
Support Abicom International Scorpion SC1750 Board

QCA9550 700MHz Extended Temperature Range
256MB DDR2
256MB Nand Flash
16MB Nor Flash
1x SFP, 1x PCIe
2x 10/100/1000 Ethernet
135x100 mm
802.11ng/g/b
802.11ac/an/a

Signed-off-by: Conor O'Gorman <i@conorogorman.net>
2017-01-20 00:40:40 +01:00
Conor O'Gorman d38ffd8cd9 ar71xx: add Abicom SC450 support
Support Abicom International Scorpion SC450 Board

QCA9550 700MHz Extended Temperature Range
256MB DDR2
256MB NAND Flash
16MB NOR Flash
10/100/1000 Ethernet
15W Max, 3x3 Mode, Full Power TX Power
802.3-at POE+ & DC Input options
100x 85mm
USB
PCIe
SFP
GPIO/LED

Signed-off-by: Conor O'Gorman <i@conorogorman.net>
2017-01-20 00:40:33 +01:00
Conor O'Gorman eb97f41fc2 ar71xx: add Abicom SC300M support
Support Abicom International Scorpion SC300M Module

QCA9550 700MHz Extended Temperature Range
256MB DDR2
256MB Nand Flash
16MB SPI Flash
802.11a/na/b/g/ng
GPIO x 22, USB x2, PCIe x2
10/100/1000 Ethernet
23dBm, Optional Onboard Antenna
DC Input, 8-20V DC
85 x 55 mm

Signed-off-by: Conor O'Gorman <i@conorogorman.net>
2017-01-20 00:40:27 +01:00
Vitaly Chekryzhev 07a02efd07 ramips: ZyXEL Keenetic series update wan mac
Signed-off-by: Vitaly Chekryzhev <13hakta@gmail.com>
2017-01-20 00:39:30 +01:00
Vitaly Chekryzhev 65985e9ace ramips: ZyXEL Keenetic Omni align factory images
ZyXEL web-flasher requires squashfs to be aligned to 64kb.

Signed-off-by: Vitaly Chekryzhev <13hakta@gmail.com>
2017-01-20 00:39:30 +01:00
Vitaly Chekryzhev f9d91a4ac7 ramips: correct keenetic-series switch index
Fix switch name typo

Signed-off-by: Vitaly Chekryzhev <13hakta@gmail.com>
2017-01-20 00:39:30 +01:00
Svetoslav Neykov 97b52593bc ar71xx: Chipidea USB device support
Changes the platform to use the Chipidea driver instead of the
generic USB host driver which has support for both host and
device modes (selected on boot).

The changes in 930-chipidea-pullup.patch are already in mainline.
I'll upstream 920-usb-chipidea-AR933x-platform-support.patch once I
can test the changes with a newer kernel.

Signed-off-by: Svetoslav Neykov <svetoslav@neykov.name>
2017-01-20 00:37:01 +01:00
Jiri Kastner cf79e393f9 octeon: fix mtd partitions for erlite on cmdline
erlite mtdparts exposes boot0, boot1 and eeprom regions
as read/write.
this patch adds readonly flags, so these regions can't be
modified. same as it is already for ER profile.

Signed-off-by: Jiri Kastner <cz172638@gmail.com>
2017-01-20 00:35:46 +01:00
Felix Fietkau 254ccf9f4c lantiq: fix an ethernet stability issue triggered by receving packets during boot
Disabling ethernet during reboot (only to enable it again when the
ethernet driver attaches) can put the chip into a faulty state where it
corrupts the header of all incoming packets.

This happens if packets arrive during the time window where the core is
disabled, and it can be easily reproduced by rebooting while sending a
flood ping to the broadcast address.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-19 14:25:44 +01:00
Felix Fietkau 24c06e2481 lantiq: fix spurious irq storm
Since the MIPS IRQ stack patches, lantiq devices were emitting a storm
of messages like this:

[  567.872172] Spurious IRQ: CAUSE=0x1100c300

Fix this by reworking the IRQ dispatch code

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-19 12:33:15 +01:00
Thibaut VARENE 7fb11c8ed2 ramips: add support for Netgear WN3000RPv3
This patch adds support for the Netgear WN3000RPv3
http://www.netgear.com/support/product/wn3000rpv3.aspx

Specifications:
- SoC: MediaTek MT7620A (580MHz, ramips)
- RAM: 32MB DDR
- Storage: 8MB NOR SPI flash
- Wireless: builtin MT7620A, 2x2:2 with u.FL connectors
- Ethernet: 1x100M
- Serial: JP1 header, 57600-8N1
- Stock firmware based on OpenWRT Kamikaze

Like the EX2700, the bootloader expects a secondary image signature,
see https://forum.openwrt.org/viewtopic.php?pid=312577#p312577
This is why the same fakeroot image is used for the WN3000

Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
2017-01-18 12:06:16 +01:00
Thibaut VARENE 29d0ac35bd ar71xx: mark soft_config mtd part as writeable for RB-941-2nD
The soft_config partition must be writeable for rbcfg to be able to
enact changes to the routerboot configuration.
The read-only flag was a mistake in the initial patch. Removing it
brings mach-rb941.c in line with all other RB platforms.

Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
2017-01-18 12:05:43 +01:00
Zhang Jingye 71a39b8690 ipq806x: Fix wireless support for Netgear Nighthawk X4S D7800
D7800 has a simular hardware to R7800 and uses dual QCA9980 for both 2.4GHz and 5GHz band.
However there is no proper initialization for them, which causes a kernel panic due to failed firmware loading.

This patch adds d7800 to ath10k caldata extraction list.
I can get two functional wireless bands after making change to it.

Signed-off-by: Zhang Jingye <934526987@qq.com>
2017-01-18 12:05:18 +01:00
BangLang Huang 2a7f669016 ramips: fix mac address of miwifi-mini
For the miwifi-mini, the offset of ethernet mac should be 0x28
which you can easyily dump from 'Factory' partition.

Signed-off-by: BangLang Huang <banglang.huang@foxmail.com>
2017-01-18 12:05:14 +01:00
Joseph C. Lehner 6b5dab9469 ramips: simplify EX2700 network config
Don't create a vlan for the Netgear EX2700's only Ethernet port.

Signed-off-by: Joseph C. Lehner <joseph.c.lehner@gmail.com>
2017-01-18 08:54:58 +01:00
Rosen Penev 7967178cfc ramips: Add back sdhci-mt7620 driver to default config
The driver no longer causes kernel panics and CPU hangs.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2017-01-18 08:54:53 +01:00
Rafał Miłecki b86a34efea bcm53xx: use accepted BCM5301X patches for R8000 and Luxul devices
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-01-18 07:49:52 +01:00
Chris Blake 0d9f922230 x86: add kernel module for sp5100_tco watchdog
This change adds the sp5100_tco driver as a kernel module for the x86
target. Specifically, this can be used by the PCEngines APU2/APU3. The
reason for having this as a kernel module is to allow users to
load/unload it on demand, as the I2C interface on the APU2/APU3 will not
work while this module is loaded. More info can be found on GitHub at
https://github.com/riptidewave93/LEDE-APU2/pull/5#issuecomment-255667736

Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
2017-01-16 20:40:13 +01:00
Chris Blake 4fab08183b x86: Add sp5100_tco AMD patches
This adds the following patches to the x86 target:

sp5100_tco: Add AMD Mullins platform support
sp5100_tco: Add AMD Carrizo platform support
sp5100_tco: fix the device check for SB800 and later chipsets
watchdog: sp5100_tco: properly check for new register layouts

With these added, the sp5100_tco driver can then be used on newer AMD
platforms, such as the PCEngines APU2/APU3 boards.

Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
2017-01-16 20:40:13 +01:00
Felix Fietkau 371b382a40 x86: remove the xen_domu subtarget
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-16 20:40:13 +01:00
Felix Fietkau 1d6879eedd x86/generic: add xen DomU support
Copy the relevant config options from the xen_domu subtarget

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-16 20:40:13 +01:00
Felix Fietkau 00144d2730 ar71xx: fix up the kernel config for the mikrotik subtarget
Limit enabled devices to routerboards, disable all other devices

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-16 20:40:13 +01:00
Cezary Jackiewicz 05115e9656 ar71xx: fix network config for Mikrotik RB411U
Mikrotik RB411U has only one ethernet port - eth0. This patch allows to create
correct config with one lan section.

Signed-off-by: Cezary Jackiewicz <cezary@eko.one.pl>
2017-01-16 20:40:12 +01:00
Thibaut VARENE 3f7841a70a ar71xx: add support for RB-941-2nD
Add full support for Mikrotik RB-941-2nD (hAP lite)

Original patch by Sergey Sergeev <adron@yapic.net> and
more information is available here:
https://wiki.openwrt.org/toh/mikrotik/rb941_2nd
I updated and adapted the patch to apply cleanly to LEDE trunk
and added proper numbering for the switch ports (matching case
labels).
Tested working on actual hardware with the information
provided in the above webpage. Sysupgrade works.

Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-16 20:40:12 +01:00
Felix Fietkau 8ab057f5e4 kernel: remove yaffs2 support, it is no longer needed
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-16 20:40:12 +01:00
Felix Fietkau 21591a3361 adm5120: mark the rb1xx subtarget as broken
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-16 20:40:12 +01:00
Felix Fietkau 9db9072d67 ar71xx: convert mikrotik routerboard support to UBI
Remove the wget2nand script, drop the need for manual installation,
use sysupgrade instead.

There are now two different NAND images, one for 64 MiB flashes, the
other for >= 128 MiB

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-16 20:40:12 +01:00
Felix Fietkau 0e547400fb ar71xx: create a proper default profile for the mikrotik subtarget, drop other profiles
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-16 20:40:12 +01:00
Jo-Philipp Wich ec1a695daa kernel: ar8327/ar8337: disable ARL access code to avoid lockups (FS#384)
Running ar8327_get_arl_entry() early after boot leads to MDIO related system
lockups on several devices using this driver.

Since dumping the ARL table contens is an optional, uncritical feature, simply
disable the code for now.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-01-16 19:39:42 +01:00
Felix Fietkau 0b2991a8ed kernel: make ledtrig-netdev use a work queue for updates
This fixes hangs in igb that happen if the update call interrupts an
already existing dev_get_stats call. In that case the calling CPU
deadlocks because it's trying to acquire the same spinlock recursively.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-16 09:52:59 +01:00
Rafał Miłecki ea6d10d572 bcm53xx: add pending BCM5301X patches: Netgear R8000 WiFi & Luxul DTS
This specifies wireless limitations for Netgear R8000 making sure people
won't use channels incorrectly (limited performance). There are also 2
new DTS files not used by us yet.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-01-15 23:10:55 +01:00
Rafał Miłecki ee6cce6b31 kernel: fix bcma serial console regression
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-01-15 23:10:54 +01:00
Pavel Kubelun 8004aa313a ipq806x: refactor ipq8065 device tree
At the moment we have 2 seperate device tree sources: 1 for ipq8064 soc located
in kernel source and 1 custom in LEDE for ipq8065.
ipq8064 and ipq8065 SoCs are completely identical except ipq8065 has higher cpu
frequencies and adjusted corresponding power supply.

This commit makes ipq8065 DTS to contain only specific for ipq8065 DT entries while
pulling all the basic SoC stuff from ipq8064 DTS.

It makes easier to manage ipq806x device trees and instead of committing changes into
2 seperate equal DTS we are ending up with only 1.
It also enables ipq8065 devices to automatically receive changes made in upstream kernel.

Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
2017-01-15 20:56:30 +01:00
Pavel Kubelun ca25b4d729 ipq806x: enable hw pseudo random number generator
Enables support for pseudo random number generator in device tree.

Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
2017-01-15 20:56:30 +01:00
Pavel Kubelun 44b44595dc ipq806x: update eMMC and SDCC3 nodes in device tree
Enable bam dma support for eMMC and SDCC3 in device tree and update nodes
to reflect Qualcomm SDK.

Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
2017-01-15 20:56:30 +01:00
Pavel Kubelun 45bf3d4f24 ipq806x: disable usb3 phy suspend and add usb tcsr control
According to Qualcomm SDK usb3 phy suspend should be disabled for
ipq806x.
This may solve issue on some ipq806x devices that breaks usb3
storage peripherals during system boot.

Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
2017-01-15 20:56:30 +01:00
John Crispin c067011af8 ramips: add back the i2c-mt7621 module
mt7628/88 are still using this module.

Signed-off-by: John Crispin <john@phrozen.org>
2017-01-15 20:45:59 +01:00
Lazar Demin ab90f15c89 ramips: Added Onion Omega2 and Omega2+
This patch adds support for the Onion Omega2 and Omega2+ (https://onion.io)

Specifications:
- SoC: MediaTek MT7688AN (580MHz, ramips)
- Omega2
  - RAM: 64MB DDR
  - Storage: 16MB NOR SPI flash onboard
- Omega2+
  - RAM: 128MB DDR
  - Storage: 32MB NOR SPI flash onboard + microSD slot
- Wireless: Built into MT7688AN (mt76) with onboard 1x chip antenna and u.FL connecter
- Ethernet: 1x100M pins on Omega2 & Omega2+, can use Ethernet Expansion and an Omega Dock to get a physical Ethernet port
- Strongly recommend using the Omega2 & Omega2+ with a Dock (Expansion Dock, Power Dock, Arduino Dock 2, Mini Dock)
  - All Docks Provide:
    - Micro-USB port to provide power to the Omega
      - On the Expansion and Mini Docks, can also access the terminal (UART0) via serial
    - USB 2.0 socket connected to Omega
  - Just the Expansion Dock, Power Dock, and Arduino Dock 2 provide:
    - Omega GPIO breakout
    - Allows for connection of Omega Expansions:
      - Ethernet Expansion
      - Relay Expansion
      - PWM Expansion
      - OLED Expansion
      - Ethernet Expansion
      - Proto Expansion
      - Cellular Expansion

Signed-off-by: Lazar Demin <lazar@onion.io>
2017-01-15 17:43:14 +01:00
João Chaínho ace9d1fb6f ar71xx: Detect USB port on Mikrotik RB750UP
The USB port on Mikrotik RB750UP isn’t detected. This patch provides a fix. Tested and working.

Signed-off-by: João Chaínho <joaochainho@gmail.com>
2017-01-15 17:43:14 +01:00
Rosen Penev 80768ddccd ramips: Add I2C driver to the default kernel config
I made a commit that added the RTC driver to the kernel config with
the intent that it would fix hctosys. Unfortunately while the RTC
driver is in there, it's connected through I2C, the driver for which
comes in module form and is thus loaded late. After this commit, it
works fine.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2017-01-15 17:43:05 +01:00
Petr Štetiar 26e4fee6e2 imx6: kernel: Backport serial port fixes
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2017-01-15 17:41:14 +01:00
Felix Fietkau 1708644f19 kernel: backport MIPS changes introducing a separate IRQ stack
Prevents crashes when IRQs arrive when the current kernel stack context
already contains deeply nested function calls, e.g. when stacking lots
of network devices on top of each other

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-15 18:25:54 +01:00
Hauke Mehrtens 5b089e45a6 kernel: update 4.4 kernel to 4.4.42
Refresh patches on all 4.4 supported platforms.
Compile & run tested: lantiq/xrx200

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-01-13 23:05:36 +01:00
Felix Fietkau c6a8a23ea2 xburst: remove hack to determine entry point
xburst has CONFIG_BOOT_RAW set, so jumping to the load address is valid

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-13 19:46:45 +01:00
Felix Fietkau d2424d4b21 malta: remove hack to determine entry point
Malta has CONFIG_BOOT_RAW set, so jumping to the load address is valid

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-13 19:46:45 +01:00
Paul Wassi 9641ceea0c mvebu: simplify etc/board.d/02_network
Unify switch configuration on Linksys WRTxx00AC series.
LAN = eth0, WAN = eth1

Signed-off-by: Paul Wassi <p.wassi@gmx.at>
[Álvaro]: also change WAN LEDs
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2017-01-13 17:12:40 +01:00
Imre Kaloz f24ffb901e mvsw61xx: add support for MV88E6352
MV88E6352 is used on Linksys WRT3200ACM

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
2017-01-13 17:12:40 +01:00
Álvaro Fernández Rojas 89ecfa7556 mvebu: several fixes for Linksys WRT3200ACM
- Fix WLAN LEDs definition.
- Fix USB pinctrl definition.
- Remove SDHCI definition.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2017-01-13 17:12:40 +01:00
Felix Fietkau 8935689a8e mxs: gzip ext4 images
Significantly reduces disk usage

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-13 16:59:28 +01:00
Felix Fietkau 515d012e6d arc770: gzip rootfs image to save some space
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-13 16:59:28 +01:00
Felix Fietkau 113dd45092 archs38: gzip rootfs image to save some space
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-13 16:59:28 +01:00
Felix Fietkau 6f57e32f95 mvebu: remove the clearfog-bundle
It is obsoleted by proper SD card image support

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-13 16:59:28 +01:00
Felix Fietkau 87b668765e image: when using the new image build code, gzip ext4 images by default
This reduces the amount of hacks in the makefile code.

Remove the apm821xx code to do the same - it was broken and left both
compressed and uncompressed images in $(BIN_DIR)

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-13 16:59:28 +01:00
Felix Fietkau 749918911d x86: disable crashlog
It could cause crashes with some forms of virtualization, and it is
unlikely to work properly with most systems.
It's safer to just disable it.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-13 15:15:09 +01:00
Felix Fietkau e38fd1eced x86: disable a workaround for a buggy glibc version
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-13 15:13:59 +01:00
Felix Fietkau 27fbf54147 octeon: disable ext4 images
They're pretty large and squashfs images tend to be more useful anyway

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-13 14:54:12 +01:00
Felix Fietkau dcd8357365 armvirt: add kernel config change missing from 0d44f0cb
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-13 11:05:32 +01:00
Felix Fietkau d6c77b9d99 ar71xx: default to external USB power on RB-912UAG
There's a GPIO that can switch between power to USB pins for the
internal MiniPCIe slot or the external USB port.
People are more likely to use the external one so enable it by default.
Existing configurations should be unaffected

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-13 10:53:05 +01:00
Felix Fietkau 83eef37400 x86/64: enable the fusion scsi driver
Is it used by VMware Fusion by default. This allows images to boot
without further config changes in VMware.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-13 10:23:42 +01:00
Felix Fietkau 0d44f0cbbc armvirt: enable the USB feature flag
USB devices can be passed through from the host to the guest

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-13 09:15:09 +01:00
Yo Abe 29097b95ba ramips: fix WLI-TX4-AG300N boot and network
Partition label "linux" prevents the root file system to be mounted at
boot time leading to a kernel panic. After changing it to "firmware",
the 2 uimage partitions "kernel", "rootfs" and squashfs "rootfs_data"
are correctly recognized.

The attached IP175C 10/100 MBit switch cannot connect to a link with
fixed 1000Mbit speed. The correct link speed is 100MBit. The switch
is detected and can be configured via mdio bus and should allow two
separable VLANs to be configured for the 4 available ports.

Signed-off-by: Yo Abe <abe.geel@gmail.com>
[picked from openwrt/PR#330]
Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-01-13 08:32:35 +01:00
Andrew Yong 3f31029b19 ramips: add support for VoCore2
This patch adds support for the VoCore VoCore2 and its complementary
"ultimate" dock.

Specifications:
- SoC: MediaTek MT7628AN (580MHz, ramips)
- RAM: 128MB DDR2 166MHz
- Storage: 16MB NOR SPI flash onboard + microSD slot on dock
- Wireless: Built into MT7628AN (mt76) with 1T1R firmware on VoCore2
            boards with onboard 1x chip antenna
- Ethernet: 1x100M (port0) on dock, 1x100M (port2) on PCB header
- Dock hardware:
  - USB 2.0 socket
  - MicroSD socket
  - 100Mbps Ethernet x1
  - 3.5mm headphone jack (TRRS) connected to Everest Semi ES8388 I2S
    DAC/ADC (support WIP)
  - Micro USB for power and console (UART2)

Initial installation:
- VoCore2 comes preinstalled with a fork of OpenWrt CC and AP on
  SSID "VoCore2"
- Connect to VoCore2 by Ethernet or Wi-Fi
- `ssh root@192.168.1.1` (password is "vocore")
- scp/wget/etc. LEDE sysupgrade.bin to VoCore2
- `sysupgrade -n <your image>.bin` (don't keep old config, as the
  original firmware uses Ralink SDK Wi-Fi drivers and not
  mt76+mac80211)
- after sysupgrade completes, Wi-Fi will be disabled by default so use
  Ethernet or the micro USB console to configure Wi-Fi again

Signed-off-by: Andrew Yong <me@ndoo.sg>
2017-01-13 08:32:35 +01:00
David Varga d7fd1a0f8d ar71xx: enable serial console on Mikrotik RB411/RB433
This patch adds support for serial console on Mikrotik RB411 and RB433
series devices.

Signed-off-by: David Varga <duvi@duvinet.hu>
[picked from FS#377]
Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-01-13 08:32:20 +01:00
Daniel Golle 287283e6e3 ramips: rt3883: fix typo in pinctrl lna_g_func
Spotted by forum users
https://forum.openwrt.org/viewtopic.php?pid=347439#p347439

Reported-by: Tom Psyborg <pozega.tomislav@gmail.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2017-01-13 05:44:06 +01:00
Felix Fietkau 90f0ca0ddc arc770: build dtb files in Image/Prepare so that they are available for Device/*
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-11 16:35:03 +01:00
Felix Fietkau b9713ad630 archs38: build dtb files in Image/Prepare so that they are available for Device/*
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-11 16:35:03 +01:00
Rafał Miłecki 4ce3c41696 bcm53xx: backport upstream bcm53xx spi driver changes
One replaces our local patch and another is just for keeping driver in
sync (license change).

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-01-11 15:33:47 +01:00
Felix Fietkau 2e1f6f1682 mvebu: work around an ethernet tx scheduling fairness issue
The hardware queue scheduling is apparently configured with fixed
priorities, which creates a nasty fairness issue where traffic from one
CPU can starve traffic from all other CPUs.

Work around this issue by forcing all tx packets to go through one CPU,
until this issue is fixed properly.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-11 14:56:57 +01:00
Felix Fietkau 3be4c6ca93 kirkwood: only add UBI EOF markers for devices that need it
Fixes issues where the second-stage u-boot already uses UBI.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-11 14:04:18 +01:00
Felix Fietkau e21cb649a2 ar71xx: disable sub-page writes on routerboard nand drivers
They seem to fail in tests using UBI, and are not used by yaffs2

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-11 13:10:19 +01:00
Felix Fietkau b7bee2858b kernel: remove linux 4.1 support
The only target still referencing it is omap24xx, and it is marked as
broken.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-11 13:09:33 +01:00
Felix Fietkau b1dbe6028e ar71xx: fix legacy image build error
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-11 13:09:21 +01:00
Felix Fietkau 1b17f4f260 arc770: fix parallel build issue
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-11 13:02:42 +01:00
Felix Fietkau 3fa2c77e3a archs38: fix parallel build issue
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-11 13:02:41 +01:00
Felix Fietkau 889272d92d ar71xx: fix RB4xx CPLD SPI device mode setup
Commit af79fdbe4a changed the code to use tx_nbits for dual SPI tx
transfers, however the SPI stack only allows this when the device mode
includes the relevant bit as well

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-11 13:02:11 +01:00
Felix Fietkau c3a8b87773 ar71xx: fix RB4xx SPI driver mode bits
Accept SPI_TX_DUAL in device mode to fix the CPLD driver

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-11 13:02:11 +01:00
Felix Fietkau 80dbaa4ef3 kernel: backport a MIPS SMP icache flush fix
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-11 10:05:08 +01:00
Rafał Miłecki 7c8a36340c kernel: update bcm47xxpart failsafe partition patches
V2 using helper function was sent for upstream kernel

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-01-11 09:54:47 +01:00
Jo-Philipp Wich 7480d3309c kernel: add missing config symbols
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-01-10 22:02:40 +01:00
Felix Fietkau e9b49a41e2 kernel: add missing config symbol
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-10 17:49:47 +01:00