mirror of https://github.com/hak5/openwrt-owl.git
ar71xx: add Abicom SC1750 support
Support Abicom International Scorpion SC1750 Board QCA9550 700MHz Extended Temperature Range 256MB DDR2 256MB Nand Flash 16MB Nor Flash 1x SFP, 1x PCIe 2x 10/100/1000 Ethernet 135x100 mm 802.11ng/g/b 802.11ac/an/a Signed-off-by: Conor O'Gorman <i@conorogorman.net>owl
Conor O'Gorman
John Crispin
parent
d38ffd8cd9
commit
274546046d
|
|
@ -440,6 +440,7 @@ re450)
|
|||
ucidef_set_led_wlan "wlan2g" "WLAN 2.4 GHz" "$board:blue:wlan2g" "phy1tpt"
|
||||
ucidef_set_led_wlan "wlan5g" "WLAN 5 GHz" "$board:blue:wlan5g" "phy0tpt"
|
||||
;;
|
||||
sc1750|\
|
||||
sc450)
|
||||
ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt"
|
||||
;;
|
||||
|
|
|
|||
|
|
@ -44,6 +44,7 @@ get_status_led() {
|
|||
mr12|\
|
||||
mr16|\
|
||||
nbg6616|\
|
||||
sc1750|\
|
||||
sc450|\
|
||||
tl-wpa8630)
|
||||
status_led="$board:green:power"
|
||||
|
|
|
|||
|
|
@ -884,6 +884,9 @@ ar71xx_board_detect() {
|
|||
*RW2458N)
|
||||
name="rw2458n"
|
||||
;;
|
||||
*SC1750)
|
||||
name="sc1750"
|
||||
;;
|
||||
*SC300M)
|
||||
name="sc300m"
|
||||
;;
|
||||
|
|
|
|||
|
|
@ -254,6 +254,7 @@ platform_check_image() {
|
|||
rocket-m-xw|\
|
||||
rocket-m|\
|
||||
rw2458n|\
|
||||
sc1750|\
|
||||
sc300m|\
|
||||
sc450|\
|
||||
sr3200|\
|
||||
|
|
|
|||
|
|
@ -148,6 +148,7 @@ CONFIG_ATH79_MACH_R6100=y
|
|||
# CONFIG_ATH79_MACH_RBSXTLITE is not set
|
||||
CONFIG_ATH79_MACH_RE450=y
|
||||
CONFIG_ATH79_MACH_RW2458N=y
|
||||
CONFIG_ATH79_MACH_SC1750=y
|
||||
CONFIG_ATH79_MACH_SC300M=y
|
||||
CONFIG_ATH79_MACH_SC450=y
|
||||
CONFIG_ATH79_MACH_SMART_300=y
|
||||
|
|
|
|||
|
|
@ -42,6 +42,17 @@ config ATH79_MACH_TUBE2H
|
|||
select ATH79_DEV_M25P80
|
||||
select ATH79_DEV_WMAC
|
||||
|
||||
config ATH79_MACH_SC1750
|
||||
bool "Abicom SC1750 board support"
|
||||
select SOC_QCA955X
|
||||
select ATH79_DEV_AP9X_PCI if PCI
|
||||
select ATH79_DEV_ETH
|
||||
select ATH79_DEV_GPIO_BUTTONS
|
||||
select ATH79_DEV_LEDS_GPIO
|
||||
select ATH79_DEV_M25P80
|
||||
select ATH79_DEV_USB
|
||||
select ATH79_DEV_WMAC
|
||||
|
||||
config ATH79_MACH_SC300M
|
||||
bool "Abicom SC300M board support"
|
||||
select SOC_QCA955X
|
||||
|
|
|
|||
|
|
@ -152,6 +152,7 @@ obj-$(CONFIG_ATH79_MACH_RB95X) += mach-rb95x.o
|
|||
obj-$(CONFIG_ATH79_MACH_RBSXTLITE) += mach-rbsxtlite.o
|
||||
obj-$(CONFIG_ATH79_MACH_RE450) += mach-re450.o
|
||||
obj-$(CONFIG_ATH79_MACH_RW2458N) += mach-rw2458n.o
|
||||
obj-$(CONFIG_ATH79_MACH_SC1750) += mach-sc1750.o
|
||||
obj-$(CONFIG_ATH79_MACH_SC300M) += mach-sc300m.o
|
||||
obj-$(CONFIG_ATH79_MACH_SC450) += mach-sc450.o
|
||||
obj-$(CONFIG_ATH79_MACH_SMART_300) += mach-smart-300.o
|
||||
|
|
|
|||
|
|
@ -0,0 +1,145 @@
|
|||
/*
|
||||
* Abicom International Scorpion SC1750 support.
|
||||
*
|
||||
* Copyright (c) 2012 Qualcomm Atheros
|
||||
* Copyright (c) 2012-2013 Gabor Juhos <juhosg@openwrt.org>
|
||||
* Copyright (c) 2017 Conor O'Gorman <i@conorogorman.net>
|
||||
*
|
||||
* Permission to use, copy, modify, and/or distribute this software for any
|
||||
* purpose with or without fee is hereby granted, provided that the above
|
||||
* copyright notice and this permission notice appear in all copies.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
||||
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
||||
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
||||
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
||||
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
|
||||
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
|
||||
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
||||
*
|
||||
*/
|
||||
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/platform_data/phy-at803x.h>
|
||||
|
||||
#include <asm/mach-ath79/ar71xx_regs.h>
|
||||
|
||||
#include "common.h"
|
||||
#include "pci.h"
|
||||
#include "dev-ap9x-pci.h"
|
||||
#include "dev-gpio-buttons.h"
|
||||
#include "dev-eth.h"
|
||||
#include "dev-leds-gpio.h"
|
||||
#include "dev-m25p80.h"
|
||||
#include "dev-nfc.h"
|
||||
#include "dev-usb.h"
|
||||
#include "dev-wmac.h"
|
||||
#include "machtypes.h"
|
||||
|
||||
#define SC1750_GPIO_LED_POWER 11
|
||||
#define SC1750_GPIO_LED_ERR1 12
|
||||
#define SC1750_GPIO_LED_WLAN 13
|
||||
#define SC1750_GPIO_LED_ERR2 14
|
||||
#define SC1750_GPIO_LED_OK3 15
|
||||
#define SC1750_GPIO_LED_ERR3 16
|
||||
#define SC1750_GPIO_BTN_RESET 4
|
||||
|
||||
#define SC1750_KEYS_POLL_INTERVAL 20 /* msecs */
|
||||
#define SC1750_KEYS_DEBOUNCE_INTERVAL (3 * SC1750_KEYS_POLL_INTERVAL)
|
||||
|
||||
#define SC1750_MAC0_OFFSET 0
|
||||
#define SC1750_MAC1_OFFSET 6
|
||||
#define SC1750_WMAC_CALDATA_OFFSET 0x1000
|
||||
#define SC1750_PCIE_CALDATA_OFFSET 0x5000
|
||||
|
||||
static struct gpio_led sc1750_leds_gpio[] __initdata = {
|
||||
{
|
||||
.name = "sc1750:green:power",
|
||||
.gpio = SC1750_GPIO_LED_POWER,
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.name = "sc1750:red:power",
|
||||
.gpio = SC1750_GPIO_LED_ERR1,
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.name = "sc1750:green:wlan",
|
||||
.gpio = SC1750_GPIO_LED_WLAN,
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.name = "sc1750:red:wlan",
|
||||
.gpio = SC1750_GPIO_LED_ERR2,
|
||||
.active_low = 1,
|
||||
}
|
||||
};
|
||||
|
||||
static struct gpio_keys_button sc1750_gpio_keys[] __initdata = {
|
||||
{
|
||||
.desc = "reset",
|
||||
.type = EV_KEY,
|
||||
.code = KEY_RESTART,
|
||||
.debounce_interval = SC1750_KEYS_DEBOUNCE_INTERVAL,
|
||||
.gpio = SC1750_GPIO_BTN_RESET,
|
||||
.active_low = 0,
|
||||
}
|
||||
};
|
||||
|
||||
static struct at803x_platform_data at803x_data = {
|
||||
.disable_smarteee = 1,
|
||||
.enable_rgmii_rx_delay = 0,
|
||||
.enable_rgmii_tx_delay = 0,
|
||||
};
|
||||
|
||||
static struct mdio_board_info sc1750_mdio0_info[] = {
|
||||
{
|
||||
.bus_id = "ag71xx-mdio.0",
|
||||
.phy_addr = 1,
|
||||
.platform_data = &at803x_data,
|
||||
},
|
||||
};
|
||||
|
||||
static void __init sc1750_setup(void)
|
||||
{
|
||||
u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
|
||||
|
||||
ath79_register_m25p80(NULL);
|
||||
|
||||
ath79_register_leds_gpio(-1, ARRAY_SIZE(sc1750_leds_gpio),
|
||||
sc1750_leds_gpio);
|
||||
ath79_register_gpio_keys_polled(-1, SC1750_KEYS_POLL_INTERVAL,
|
||||
ARRAY_SIZE(sc1750_gpio_keys),
|
||||
sc1750_gpio_keys);
|
||||
|
||||
ath79_register_usb();
|
||||
ath79_register_nfc();
|
||||
|
||||
ath79_register_wmac(art + SC1750_WMAC_CALDATA_OFFSET, NULL);
|
||||
|
||||
ath79_register_mdio(0, 0);
|
||||
mdiobus_register_board_info(sc1750_mdio0_info,
|
||||
ARRAY_SIZE(sc1750_mdio0_info));
|
||||
|
||||
ath79_init_mac(ath79_eth0_data.mac_addr, art + SC1750_MAC0_OFFSET, 0);
|
||||
|
||||
ath79_eth0_pll_data.pll_1000 = 0xa6000101;
|
||||
ath79_eth0_pll_data.pll_100 = 0xa4000101;
|
||||
/* GMAC0 is connected to the RMGII interface */
|
||||
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
|
||||
ath79_eth0_data.phy_mask = 0xF;
|
||||
ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
|
||||
|
||||
ath79_register_eth(0);
|
||||
|
||||
/* GMAC1 is connected to the SGMII interface */
|
||||
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
|
||||
ath79_eth1_data.speed = SPEED_1000;
|
||||
ath79_eth1_data.duplex = DUPLEX_FULL;
|
||||
|
||||
ath79_register_eth(1);
|
||||
|
||||
ath79_register_pci();
|
||||
}
|
||||
|
||||
MIPS_MACHINE(ATH79_MACH_SC1750, "SC1750", "Abicom SC1750", sc1750_setup);
|
||||
|
|
@ -169,6 +169,7 @@ enum ath79_mach_type {
|
|||
ATH79_MACH_RB_SXTLITE5ND, /* Mikrotik RouterBOARD SXT Lite 5nD */
|
||||
ATH79_MACH_RE450, /* TP-LINK RE450 */
|
||||
ATH79_MACH_RW2458N, /* Redwave RW2458N */
|
||||
ATH79_MACH_SC1750, /* Abicom SC1750 */
|
||||
ATH79_MACH_SC300M, /* Abicom SC300M */
|
||||
ATH79_MACH_SC450, /* Abicom SC450 */
|
||||
ATH79_MACH_SMART_300, /* NC-LINK SMART-300 */
|
||||
|
|
|
|||
|
|
@ -464,6 +464,16 @@ define Device/onion-omega
|
|||
endef
|
||||
TARGET_DEVICES += onion-omega
|
||||
|
||||
define Device/sc1750
|
||||
DEVICE_TITLE := Abicom SC1750
|
||||
DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport
|
||||
BOARDNAME = SC1750
|
||||
IMAGE_SIZE = 15744k
|
||||
CONSOLE = ttyS0,115200
|
||||
MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env),15744k(firmware),128k(APConfig),128k(kplog),64k(ART)
|
||||
endef
|
||||
TARGET_DEVICES += sc1750
|
||||
|
||||
define Device/sc300m
|
||||
DEVICE_TITLE := Abicom SC300M
|
||||
DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport
|
||||
|
|
|
|||
Loading…
Reference in New Issue