hak5
/
openwrt-owl
mirror of https://github.com/hak5/openwrt-owl.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

ar71xx: add support to TP-Link Archer C59v1 and C60v1 

TP-Link Archer C59v1 is a dual-band AC1350 router, based on Qualcomm/Atheros
QCA9561+QCA9886.

Specification:

- 775/650/258 MHz (CPU/DDR/AHB)
- 128 MB of RAM (DDR2)
- 16 MB of FLASH (SPI NOR)
- 3T3R 2.4 GHz
- 2T2R 5 GHz
- 5x 10/100 Mbps Ethernet
- USB 2.0 port
- 8x LED (controled by 74HC595), 3x button
- UART header on PCB

TP-Link Archer C60v1 is a dual-band AC1350 router, based on Qualcomm/Atheros
QCA9561+QCA9886.

Specification:

- 775/650/258 MHz (CPU/DDR/AHB)
- 64 MB of RAM (DDR2)
- 8 MB of FLASH (SPI NOR)
- 3T3R 2.4 GHz
- 2T2R 5 GHz
- 5x 10/100 Mbps Ethernet
- 7x LED, 2x button
- UART header on PCB

Currently not working:
- Port LAN1 on C59, LAN4 on C60
- WiFi 5GHz (missing ath10k firmware for QCA9886 chip)
- Update from oficial web interface ( tplink-saveloader not support "product-info")

Flash instruction:
1. Set PC to fixed ip address 192.168.0.66
2. Download lede-ar71xx-generic-archer-cXX-v1-squashfs-factory.bin
and rename it to tp_recovery.bin
3. Start a tftp server with the file tp_recovery.bin in its root directory
4. Turn off the router
5. Press and hold Reset button
6. Turn on router with the reset button pressed and wait ~15 seconds
7. Release the reset button and after a short time
the firmware should be transferred from the tftp server
8. Wait ~30 second to complete recovery.

Flash instruction under U-Boot, using UART:

1. tftp 0x81000000 lede-ar71xx-...-sysupgrade.bin
2. erase 0x9f020000 +$filesize
3. cp.b $fileaddr 0x9f020000 $filesize
4. reset

Signed-off-by: Henryk Heisig <hyniu@o2.pl>
[Jo-Philipp Wich: remove duplicate ATH79_MACH_ARCHER_C59/C60_V1 entries]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
owl
Henryk Heisig 2016-12-27 22:41:41 +01:00 committed by Jo-Philipp Wich
parent eec0c41375
commit e39dc8d823
16 changed files with 531 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

13
target/linux/ar71xx/base-files/etc/board.d/01_leds
View File

@ -41,6 +41,19 @@ antrouter-r1)
ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt"
ucidef_set_led_default "btc" "BTC" "$board:green:btc" "0"
;;
archer-c59-v1|\
archer-c60-v1)
ucidef_set_led_switch "lan" "LAN" "$board:green:lan" "switch0" "0x3C"
ucidef_set_led_switch "wan" "WAN" "$board:green:wan" "switch0" "0x02"
ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan2g" "phy1tpt"
ucidef_set_led_wlan "wlan5g" "WLAN5G" "$board:green:wlan5g" "phy0tpt"
case "$board" in
archer-c59-v1)
ucidef_set_led_usbdev "usb" "USB" "$board:green:usb" "1-1"
;;
esac
;;
arduino-yun)
ucidef_set_led_wlan "wlan" "WLAN" "arduino:blue:wlan" "phy0tpt"
ucidef_set_led_usbdev "usb" "USB" "arduino:white:usb" "1-1.1"

5
target/linux/ar71xx/base-files/etc/board.d/02_network
View File

@ -196,6 +196,11 @@ ar71xx_setup_interfaces()
ucidef_add_switch "switch0" \
"0@eth1" "2:lan" "3:lan" "4:lan" "5:lan" "6@eth0" "1:wan"
;;
archer-c59-v1|\
archer-c60-v1)
ucidef_add_switch "switch0" \
"0@eth0" "2:lan:4" "3:lan:3" "4:lan:2" "5:lan:1" "1:wan"
;;
arduino-yun|\
dir-505-a1|\
tl-wa801nd-v3)

2
target/linux/ar71xx/base-files/etc/diag.sh
View File

@ -41,6 +41,8 @@ get_status_led() {
ap135-020)
status_led="ap135:green:status"
;;
archer-c59-v1|\
archer-c60-v1|\
mr12|\
mr16|\
nbg6616|\

2
target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
View File

@ -90,6 +90,8 @@ case "$FIRMWARE" in
ath10kcal_extract "art" 20480 2116
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -2)
;;
archer-c59-v1|\
archer-c60-v1|\
tl-wdr6500-v2)
ath10kcal_extract "art" 20480 2116
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -2)

6
target/linux/ar71xx/base-files/lib/ar71xx.sh
View File

@ -454,6 +454,12 @@ ar71xx_board_detect() {
*"Archer C5")
name="archer-c5"
;;
*"Archer C59 v1")
name="archer-c59-v1"
;;
*"Archer C60 v1")
name="archer-c60-v1"
;;
*"Archer C7")
name="archer-c7"
;;

2
target/linux/ar71xx/base-files/lib/upgrade/platform.sh
View File

@ -205,6 +205,8 @@ platform_check_image() {
airrouter|\
ap132|\
ap90q|\
archer-c59-v1|\
archer-c60-v1|\
bullet-m|\
c-55|\
carambola2|\

4
target/linux/ar71xx/config-4.4
View File

@ -49,6 +49,8 @@ CONFIG_ATH79_MACH_AP152=y
# CONFIG_ATH79_MACH_AP81 is not set
CONFIG_ATH79_MACH_AP90Q=y
CONFIG_ATH79_MACH_AP96=y
CONFIG_ATH79_MACH_ARCHER_C59_V1=y
CONFIG_ATH79_MACH_ARCHER_C60_V1=y
CONFIG_ATH79_MACH_ARCHER_C7=y
CONFIG_ATH79_MACH_ARDUINO_YUN=y
CONFIG_ATH79_MACH_AW_NR580=y
@ -272,6 +274,7 @@ CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_IRQCHIP=y
CONFIG_GPIO_74X164=y
CONFIG_GPIO_DEVRES=y
# CONFIG_GPIO_LATCH is not set
CONFIG_GPIO_NXP_74HC153=y
@ -430,6 +433,7 @@ CONFIG_SOC_QCA956X=y
CONFIG_SPI=y
CONFIG_SPI_ATH79=y
CONFIG_SPI_BITBANG=y
CONFIG_SPI_GPIO=y
CONFIG_SPI_MASTER=y
# CONFIG_SPI_RB4XX is not set
# CONFIG_SPI_VSC7385 is not set

21
target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
View File

@ -1255,6 +1255,27 @@ config ATH79_MACH_BSB
select ATH79_DEV_USB
select ATH79_DEV_WMAC
config ATH79_MACH_ARCHER_C59_V1
bool "TP-LINK Archer C59 v1 support"
select SOC_QCA956X
select ATH79_DEV_AP9X_PCI if PCI
select ATH79_DEV_ETH
select ATH79_DEV_GPIO_BUTTONS
select ATH79_DEV_LEDS_GPIO
select ATH79_DEV_M25P80
select ATH79_DEV_USB
select ATH79_DEV_WMAC
config ATH79_MACH_ARCHER_C60_V1
bool "TP-LINK Archer C60 v1 support"
select SOC_QCA956X
select ATH79_DEV_AP9X_PCI if PCI
select ATH79_DEV_ETH
select ATH79_DEV_GPIO_BUTTONS
select ATH79_DEV_LEDS_GPIO
select ATH79_DEV_M25P80
select ATH79_DEV_WMAC
config ATH79_MACH_ARCHER_C7
bool "TP-LINK Archer C5/C7/TL-WDR4900 v2 board support"
select SOC_QCA955X

2
target/linux/ar71xx/files/arch/mips/ath79/Makefile
View File

@ -54,6 +54,8 @@ obj-$(CONFIG_ATH79_MACH_AP147) += mach-ap147.o
obj-$(CONFIG_ATH79_MACH_AP152) += mach-ap152.o
obj-$(CONFIG_ATH79_MACH_AP90Q) += mach-ap90q.o
obj-$(CONFIG_ATH79_MACH_AP96) += mach-ap96.o
obj-$(CONFIG_ATH79_MACH_ARCHER_C59_V1) += mach-archer-c59-v1.o
obj-$(CONFIG_ATH79_MACH_ARCHER_C60_V1) += mach-archer-c60-v1.o
obj-$(CONFIG_ATH79_MACH_ARCHER_C7) += mach-archer-c7.o
obj-$(CONFIG_ATH79_MACH_ARDUINO_YUN) += mach-arduino-yun.o
obj-$(CONFIG_ATH79_MACH_AW_NR580) += mach-aw-nr580.o

223
target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c59-v1.c Normal file
View File

@ -0,0 +1,223 @@
/*
* TP-Link Archer C59 v1 board support
*
* Copyright (C) 2016 Henryk Heisig <hyniu@o2.pl>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/platform_device.h>
#include <linux/ath9k_platform.h>
#include <linux/ar8216_platform.h>
#include <asm/mach-ath79/ar71xx_regs.h>
#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/spi/spi_gpio.h>
#include <linux/spi/74x164.h>
#include "common.h"
#include "dev-m25p80.h"
#include "machtypes.h"
#include "pci.h"
#include "dev-ap9x-pci.h"
#include "dev-eth.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#include "dev-spi.h"
#include "dev-usb.h"
#include "dev-wmac.h"
#define ARCHER_C59_V1_KEYS_POLL_INTERVAL 20
#define ARCHER_C59_V1_KEYS_DEBOUNCE_INTERVAL (3 * ARCHER_C59_V1_KEYS_POLL_INTERVAL)
#define ARCHER_C59_V1_GPIO_BTN_RESET 21
#define ARCHER_C59_V1_GPIO_BTN_RFKILL 2
#define ARCHER_C59_V1_GPIO_BTN_WPS 1
#define ARCHER_C59_V1_GPIO_USB_POWER 22
#define ARCHER_C59_GPIO_SHIFT_OE 16
#define ARCHER_C59_GPIO_SHIFT_SER 17
#define ARCHER_C59_GPIO_SHIFT_SRCLK 18
#define ARCHER_C59_GPIO_SHIFT_SRCLR 19
#define ARCHER_C59_GPIO_SHIFT_RCLK 20
#define ARCHER_C59_74HC_GPIO_BASE QCA956X_GPIO_COUNT
#define ARCHER_C59_74HC_GPIO_LED_POWER 23
#define ARCHER_C59_74HC_GPIO_LED_WLAN2 24
#define ARCHER_C59_74HC_GPIO_LED_WLAN5 25
#define ARCHER_C59_74HC_GPIO_LED_LAN 26
#define ARCHER_C59_74HC_GPIO_LED_WAN_GREEN 27
#define ARCHER_C59_74HC_GPIO_LED_WAN_AMBER 28
#define ARCHER_C59_74HC_GPIO_LED_WPS 29
#define ARCHER_C59_74HC_GPIO_LED_USB 30
#define ARCHER_C59_V1_SSR_BIT_0 0
#define ARCHER_C59_V1_SSR_BIT_1 1
#define ARCHER_C59_V1_SSR_BIT_2 2
#define ARCHER_C59_V1_SSR_BIT_3 3
#define ARCHER_C59_V1_SSR_BIT_4 4
#define ARCHER_C59_V1_SSR_BIT_5 5
#define ARCHER_C59_V1_SSR_BIT_6 6
#define ARCHER_C59_V1_SSR_BIT_7 7
#define ARCHER_C59_V1_WMAC_CALDATA_OFFSET 0x1000
#define ARCHER_C59_V1_PCI_CALDATA_OFFSET 0x5000
static struct gpio_led archer_c59_v1_leds_gpio[] __initdata = {
{
.name = "archer-c59-v1:green:power",
.gpio = ARCHER_C59_74HC_GPIO_LED_POWER,
.active_low = 1,
},
{
.name = "archer-c59-v1:green:wlan2g",
.gpio = ARCHER_C59_74HC_GPIO_LED_WLAN2,
.active_low = 1,
},
{
.name = "archer-c59-v1:green:wlan5g",
.gpio = ARCHER_C59_74HC_GPIO_LED_WLAN5,
.active_low = 1,
},
{
.name = "archer-c59-v1:green:lan",
.gpio = ARCHER_C59_74HC_GPIO_LED_LAN,
.active_low = 1,
},
{
.name = "archer-c59-v1:green:wan",
.gpio = ARCHER_C59_74HC_GPIO_LED_WAN_GREEN,
.active_low = 1,
},
{
.name = "archer-c59-v1:amber:wan",
.gpio = ARCHER_C59_74HC_GPIO_LED_WAN_AMBER,
.active_low = 1,
},
{
.name = "archer-c59-v1:green:wps",
.gpio = ARCHER_C59_74HC_GPIO_LED_WPS,
.active_low = 1,
},
{
.name = "archer-c59-v1:green:usb",
.gpio = ARCHER_C59_74HC_GPIO_LED_USB,
.active_low = 1,
},
};
static struct gpio_keys_button archer_c59_v1_gpio_keys[] __initdata = {
{
.desc = "Reset button",
.type = EV_KEY,
.code = KEY_RESTART,
.debounce_interval = ARCHER_C59_V1_KEYS_DEBOUNCE_INTERVAL,
.gpio = ARCHER_C59_V1_GPIO_BTN_RESET,
.active_low = 1,
},
{
.desc = "RFKILL button",
.type = EV_KEY,
.code = KEY_RFKILL,
.debounce_interval = ARCHER_C59_V1_KEYS_DEBOUNCE_INTERVAL,
.gpio = ARCHER_C59_V1_GPIO_BTN_RFKILL,
.active_low = 1,
},
{
.desc = "WPS button",
.type = EV_KEY,
.code = KEY_WPS_BUTTON,
.debounce_interval = ARCHER_C59_V1_KEYS_DEBOUNCE_INTERVAL,
.gpio = ARCHER_C59_V1_GPIO_BTN_WPS,
.active_low = 1,
},
};
static struct spi_gpio_platform_data archer_c59_v1_spi_data = {
.sck = ARCHER_C59_GPIO_SHIFT_SRCLK,
.miso = SPI_GPIO_NO_MISO,
.mosi = ARCHER_C59_GPIO_SHIFT_SER,
.num_chipselect = 1,
};
static u8 archer_c59_v1_ssr_initdata[] __initdata = {
BIT(ARCHER_C59_V1_SSR_BIT_7) |
BIT(ARCHER_C59_V1_SSR_BIT_6) |
BIT(ARCHER_C59_V1_SSR_BIT_5) |
BIT(ARCHER_C59_V1_SSR_BIT_4) |
BIT(ARCHER_C59_V1_SSR_BIT_3) |
BIT(ARCHER_C59_V1_SSR_BIT_2) |
BIT(ARCHER_C59_V1_SSR_BIT_1)
};
static struct gen_74x164_chip_platform_data archer_c59_v1_ssr_data = {
.base = ARCHER_C59_74HC_GPIO_BASE,
.num_registers = ARRAY_SIZE(archer_c59_v1_ssr_initdata),
.init_data = archer_c59_v1_ssr_initdata,
};
static struct platform_device archer_c59_v1_spi_device = {
.name = "spi_gpio",
.id = 1,
.dev = {
.platform_data = &archer_c59_v1_spi_data,
},
};
static struct spi_board_info archer_c59_v1_spi_info[] = {
{
.bus_num = 1,
.chip_select = 0,
.max_speed_hz = 10000000,
.modalias = "74x164",
.platform_data = &archer_c59_v1_ssr_data,
.controller_data = (void *) ARCHER_C59_GPIO_SHIFT_RCLK,
},
};
static void __init archer_c59_v1_setup(void)
{
u8 *mac = (u8 *) KSEG1ADDR(0x1f010008);
u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
ath79_register_m25p80(NULL);
spi_register_board_info(archer_c59_v1_spi_info,
ARRAY_SIZE(archer_c59_v1_spi_info));
platform_device_register(&archer_c59_v1_spi_device);
ath79_register_leds_gpio(-1, ARRAY_SIZE(archer_c59_v1_leds_gpio),
archer_c59_v1_leds_gpio);
ath79_register_gpio_keys_polled(-1, ARCHER_C59_V1_KEYS_POLL_INTERVAL,
ARRAY_SIZE(archer_c59_v1_gpio_keys),
archer_c59_v1_gpio_keys);
ath79_register_mdio(1, 0x0);
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
ath79_eth1_data.speed = SPEED_1000;
ath79_eth1_data.duplex = DUPLEX_FULL;
ath79_eth1_data.phy_mask = BIT(4);
ath79_register_eth(1);
ath79_register_wmac(art + ARCHER_C59_V1_WMAC_CALDATA_OFFSET, mac);
ap91_pci_init(art + ARCHER_C59_V1_PCI_CALDATA_OFFSET, NULL);
ath79_register_usb();
gpio_request_one(ARCHER_C59_V1_GPIO_USB_POWER,
GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
"USB power");
gpio_request_one(ARCHER_C59_GPIO_SHIFT_OE,
GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED,
"LED control");
gpio_request_one(ARCHER_C59_GPIO_SHIFT_SRCLR,
GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
"LED reset");
}
MIPS_MACHINE(ATH79_MACH_ARCHER_C59_V1, "ARCHER-C59-V1",
"TP-LINK Archer C59 v1", archer_c59_v1_setup);

135
target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c60-v1.c Normal file
View File

@ -0,0 +1,135 @@
/*
* TP-Link Archer C60 v1 board support
*
* Copyright (C) 2016 Henryk Heisig <hyniu@o2.pl>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/platform_device.h>
#include <linux/ath9k_platform.h>
#include <linux/ar8216_platform.h>
#include <asm/mach-ath79/ar71xx_regs.h>
#include <linux/gpio.h>
#include "common.h"
#include "dev-m25p80.h"
#include "machtypes.h"
#include "pci.h"
#include "dev-ap9x-pci.h"
#include "dev-eth.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#include "dev-spi.h"
#include "dev-usb.h"
#include "dev-wmac.h"
#define ARCHER_C60_V1_GPIO_LED_LAN 2
#define ARCHER_C60_V1_GPIO_LED_POWER 16
#define ARCHER_C60_V1_GPIO_LED_WLAN2 17
#define ARCHER_C60_V1_GPIO_LED_WLAN5 18
#define ARCHER_C60_V1_GPIO_LED_WPS 19
#define ARCHER_C60_V1_GPIO_LED_WAN_GREEN 20
#define ARCHER_C60_V1_GPIO_LED_WAN_AMBER 22
#define ARCHER_C60_V1_KEYS_POLL_INTERVAL 20
#define ARCHER_C60_V1_KEYS_DEBOUNCE_INTERVAL (3 * ARCHER_C60_V1_KEYS_POLL_INTERVAL)
#define ARCHER_C60_V1_GPIO_BTN_RESET 21
#define ARCHER_C60_V1_GPIO_BTN_RFKILL 1
#define ARCHER_C60_V1_WMAC_CALDATA_OFFSET 0x1000
#define ARCHER_C60_V1_PCI_CALDATA_OFFSET 0x5000
static struct gpio_led archer_c60_v1_leds_gpio[] __initdata = {
{
.name = "archer-c60-v1:green:power",
.gpio = ARCHER_C60_V1_GPIO_LED_POWER,
.active_low = 1,
},
{
.name = "archer-c60-v1:green:wlan2g",
.gpio = ARCHER_C60_V1_GPIO_LED_WLAN2,
.active_low = 1,
},
{
.name = "archer-c60-v1:green:wlan5g",
.gpio = ARCHER_C60_V1_GPIO_LED_WLAN5,
.active_low = 1,
},
{
.name = "archer-c60-v1:green:lan",
.gpio = ARCHER_C60_V1_GPIO_LED_LAN,
.active_low = 1,
},
{
.name = "archer-c60-v1:green:wan",
.gpio = ARCHER_C60_V1_GPIO_LED_WAN_GREEN,
.active_low = 1,
},
{
.name = "archer-c60-v1:amber:wan",
.gpio = ARCHER_C60_V1_GPIO_LED_WAN_AMBER,
.active_low = 1,
},
{
.name = "archer-c60-v1:green:wps",
.gpio = ARCHER_C60_V1_GPIO_LED_WPS,
.active_low = 1,
},
};
static struct gpio_keys_button archer_c60_v1_gpio_keys[] __initdata = {
{
.desc = "Reset button",
.type = EV_KEY,
.code = KEY_RESTART,
.debounce_interval = ARCHER_C60_V1_KEYS_DEBOUNCE_INTERVAL,
.gpio = ARCHER_C60_V1_GPIO_BTN_RESET,
.active_low = 1,
},
{
.desc = "RFKILL button",
.type = EV_KEY,
.code = KEY_RFKILL,
.debounce_interval = ARCHER_C60_V1_KEYS_DEBOUNCE_INTERVAL,
.gpio = ARCHER_C60_V1_GPIO_BTN_RFKILL,
.active_low = 1,
},
};
static void __init archer_c60_v1_setup(void)
{
u8 *mac = (u8 *) KSEG1ADDR(0x1f010008);
u8 *art = (u8 *) KSEG1ADDR(0x1f7f0000);
ath79_register_m25p80(NULL);
ath79_register_leds_gpio(-1, ARRAY_SIZE(archer_c60_v1_leds_gpio),
archer_c60_v1_leds_gpio);
ath79_register_gpio_keys_polled(-1, ARCHER_C60_V1_KEYS_POLL_INTERVAL,
ARRAY_SIZE(archer_c60_v1_gpio_keys),
archer_c60_v1_gpio_keys);
ath79_setup_qca956x_eth_cfg(QCA956X_ETH_CFG_SW_PHY_SWAP |
QCA956X_ETH_CFG_SW_PHY_ADDR_SWAP);
ath79_register_mdio(1, 0x0);
ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
ath79_eth1_data.speed = SPEED_1000;
ath79_eth1_data.duplex = DUPLEX_FULL;
ath79_register_eth(1);
ath79_register_wmac(art + ARCHER_C60_V1_WMAC_CALDATA_OFFSET, mac);
ap91_pci_init(art + ARCHER_C60_V1_PCI_CALDATA_OFFSET, NULL);
}
MIPS_MACHINE(ATH79_MACH_ARCHER_C60_V1, "ARCHER-C60-V1",
"TP-LINK Archer C60 v1", archer_c60_v1_setup);

2
target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
View File

@ -38,6 +38,8 @@ enum ath79_mach_type {
ATH79_MACH_AP90Q, /* YunCore AP90Q */
ATH79_MACH_AP96, /* Atheros AP96 */
ATH79_MACH_ARCHER_C5, /* TP-LINK Archer C5 board */
ATH79_MACH_ARCHER_C59_V1, /* TP-LINK Archer C59 V1 board */
ATH79_MACH_ARCHER_C60_V1, /* TP-LINK Archer C60 V1 board */
ATH79_MACH_ARCHER_C7, /* TP-LINK Archer C7 board */
ATH79_MACH_ARCHER_C7_V2, /* TP-LINK Archer C7 V2 board */
ATH79_MACH_ARDUINO_YUN, /* Yun */

39
target/linux/ar71xx/image/tp-link.mk
View File

@ -45,6 +45,15 @@ define Build/mktplinkfw-kernel
@mv $@.new $@
endef
define Build/uImageArcher
mkimage -A $(LINUX_KARCH) \
-O linux -T kernel \
-C $(1) -a $(KERNEL_LOADADDR) -e $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \
-n '$(call toupper,$(LINUX_KARCH)) LEDE Linux-$(LINUX_VERSION)' -d $@ $@.new
@mv $@.new $@
endef
define Device/tplink
TPLINK_HWREV := 0x1
TPLINK_HEADER_VERSION := 1
@ -95,6 +104,36 @@ $(Device/tplink)
IMAGE_SIZE := 15872k
endef
define Device/archer-c59-v1
DEVICE_TITLE := TP-LINK Archer C59 v1
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k
BOARDNAME := ARCHER-C59-V1
TPLINK_BOARD_NAME := ARCHER-C59-V1
DEVICE_PROFILE := ARCHERC59V1
IMAGE_SIZE := 14528k
KERNEL := kernel-bin | patch-cmdline | lzma | uImageArcher lzma
IMAGES := sysupgrade.bin factory.bin
IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade
IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
MTDPARTS := spi0.0:64k(u-boot)ro,64k(mac)ro,1536k(kernel),12992k(rootfs),1664k(tplink)ro,64k(art)ro,14528k@0x20000(firmware)
endef
TARGET_DEVICES += archer-c59-v1
define Device/archer-c60-v1
DEVICE_TITLE := TP-LINK Archer C60 v1
DEVICE_PACKAGES := kmod-ath10k
BOARDNAME := ARCHER-C60-V1
TPLINK_BOARD_NAME := ARCHER-C60-V1
DEVICE_PROFILE := ARCHERC60V1
IMAGE_SIZE := 7936k
KERNEL := kernel-bin | patch-cmdline | lzma | uImageArcher lzma
IMAGES := sysupgrade.bin factory.bin
IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade
IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
MTDPARTS := spi0.0:64k(u-boot)ro,64k(mac)ro,1344k(kernel),6592k(rootfs),64k(tplink)ro,64k(art)ro,7936k@0x20000(firmware)
endef
TARGET_DEVICES += archer-c60-v1
define Device/cpe510-520
DEVICE_TITLE := TP-LINK CPE510/520
DEVICE_PACKAGES := rssileds

2
target/linux/ar71xx/mikrotik/config-default
View File

@ -15,6 +15,8 @@
# CONFIG_ATH79_MACH_AP152 is not set
# CONFIG_ATH79_MACH_AP90Q is not set
# CONFIG_ATH79_MACH_AP96 is not set
# CONFIG_ATH79_MACH_ARCHER_C59_V1 is not set
# CONFIG_ATH79_MACH_ARCHER_C60_V1 is not set
# CONFIG_ATH79_MACH_ARCHER_C7 is not set
# CONFIG_ATH79_MACH_ARDUINO_YUN is not set
# CONFIG_ATH79_MACH_AW_NR580 is not set

2
target/linux/ar71xx/nand/config-default
View File

@ -8,6 +8,8 @@
# CONFIG_ATH79_MACH_AP136 is not set
# CONFIG_ATH79_MACH_AP147 is not set
# CONFIG_ATH79_MACH_AP96 is not set
# CONFIG_ATH79_MACH_ARCHER_C59_V1 is not set
# CONFIG_ATH79_MACH_ARCHER_C60_V1 is not set
# CONFIG_ATH79_MACH_ARCHER_C7 is not set
# CONFIG_ATH79_MACH_AW_NR580 is not set
# CONFIG_ATH79_MACH_CAP324 is not set

71
tools/firmware-utils/src/tplink-safeloader.c
View File

@ -293,6 +293,77 @@ static struct device_info boards[] = {
.last_sysupgrade_partition = "file-system"
},
/** Firmware layout for the C59v1 */
{
.id = "ARCHER-C59-V1",
.vendor = "",
.support_list =
"SupportList:\r\n"
"{product_name:Archer C59,product_ver:1.0.0,special_id:00000000}\r\n"
"{product_name:Archer C59,product_ver:1.0.0,special_id:45550000}\r\n"
"{product_name:Archer C59,product_ver:1.0.0,special_id:55530000}\r\n",
.support_trail = '\x00',
.partitions = {
{"fs-uboot", 0x00000, 0x10000},
{"default-mac", 0x10000, 0x00200},
{"pin", 0x10200, 0x00200},
{"device-id", 0x10400, 0x00100},
{"product-info", 0x10500, 0x0fb00},
{"os-image", 0x20000, 0x180000},
{"file-system", 0x1a0000, 0xcb0000},
{"partition-table", 0xe50000, 0x10000},
{"soft-version", 0xe60000, 0x10000},
{"support-list", 0xe70000, 0x10000},
{"profile", 0xe80000, 0x10000},
{"default-config", 0xe90000, 0x10000},
{"user-config", 0xea0000, 0x40000},
{"usb-config", 0xee0000, 0x10000},
{"certificate", 0xef0000, 0x10000},
{"qos-db", 0xf00000, 0x40000},
{"log", 0xfe0000, 0x10000},
{"radio", 0xff0000, 0x10000},
{NULL, 0, 0}
},
.first_sysupgrade_partition = "os-image",
.last_sysupgrade_partition = "file-system",
},
/** Firmware layout for the C60v1 */
{
.id = "ARCHER-C60-V1",
.vendor = "",
.support_list =
"SupportList:\r\n"
"{product_name:Archer C60,product_ver:1.0.0,special_id:00000000}\r\n"
"{product_name:Archer C60,product_ver:1.0.0,special_id:45550000}\r\n"
"{product_name:Archer C60,product_ver:1.0.0,special_id:55530000}\r\n",
.support_trail = '\x00',
.partitions = {
{"fs-uboot", 0x00000, 0x10000},
{"default-mac", 0x10000, 0x00200},
{"pin", 0x10200, 0x00200},
{"product-info", 0x10400, 0x00100},
{"partition-table", 0x10500, 0x00800},
{"soft-version", 0x11300, 0x00200},
{"support-list", 0x11500, 0x00100},
{"device-id", 0x11600, 0x00100},
{"profile", 0x11700, 0x03900},
{"default-config", 0x15000, 0x04000},
{"user-config", 0x19000, 0x04000},
{"os-image", 0x20000, 0x150000},
{"file-system", 0x170000, 0x678000},
{"certyficate", 0x7e8000, 0x08000},
{"radio", 0x7f0000, 0x10000},
{NULL, 0, 0}
},
.first_sysupgrade_partition = "os-image",
.last_sysupgrade_partition = "file-system",
},
/** Firmware layout for the C9 */
{
.id = "ARCHERC9",