Commit Graph

9890 Commits (50213fc3541c6871e541f492ced763263f430dfe)

Author SHA1 Message Date
Gabor Juhos fd645abca4 ppc40x: add support for 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35734
2013-02-21 19:23:29 +00:00
Gabor Juhos 4da13625d5 mpc85xx: add user-space support for the TL-WDR4900 v1
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35733
2013-02-21 19:20:34 +00:00
Gabor Juhos bd2c77b264 mpc85xx: update 3.8 config
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35732
2013-02-21 18:44:40 +00:00
Gabor Juhos bcac3c5569 ar71xx: fix MAC address assignment on the DIR-825-Bx boards
Use the same MAC addresses as the original firmware.

Based on a patch from #10421.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Tested-by: Gabor Varga <vargagab@gmail.com>

SVN-Revision: 35730
2013-02-21 17:58:21 +00:00
Gabor Juhos d785803bfa mpc85xx: add support for 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35729
2013-02-21 17:48:31 +00:00
Gabor Juhos cf2324fd6b ar71xx: add support for 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35728
2013-02-21 17:47:15 +00:00
Gabor Juhos 9cc3a60b5a atheros: add support for linux kernel v3.8
This builds and boots.

Because of the function pointer indirection (e.g. mtd_info's read
function pointer is assigned to spiflash_read), it is difficult for me
to understand where the calls are coming from (could be anywhere,
conditionally pointing at spiflash versions), so I punted and used the
renamed function pointers (_erase, _read, _write).  If someone knows
better what to do, please fix.

Cleaned up other sundry kernel tracking issues like get_phy_id and
__devinit,etc.

[juhosg: don't switch to that yet]

Signed-off-by: Russell Senior <russell@personaltelco.net>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35727
2013-02-21 17:45:54 +00:00
Gabor Juhos babd5aa2fc linux/3.8: add missing config symbols
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35726
2013-02-21 16:52:34 +00:00
Jonas Gorski ff20c0e1fc bcm63xx: Fix sysupgrade for tag-version 7 and 8
Fix sysupgrade for tag-version 7 and 8.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 35724
2013-02-21 11:45:41 +00:00
Jonas Gorski 3010a0b616 generic: b53: clear SM_SW_FWD_MODE unconditionally when enabling VLAN
Setting this bit stops BCM53125 (bgmac actually) from receiving any
packets. This bit is cleared conditionally in b53_switch_reset and it
seems the same is done in bcmrobo.c which never sets that bit again.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 35723
2013-02-21 11:45:38 +00:00
Jonas Gorski 23e71c56ba generic: b53: remove empty spaces
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 35722
2013-02-21 11:45:36 +00:00
Jonas Gorski 1cd62d06ca ramips: print image build warnings/errors to stderr
Makes warnings/errors visible when building with V=w/V=1.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35721
2013-02-21 11:45:33 +00:00
Jonas Gorski a0956a88d4 cns21xx: print image build warnings/errors to stderr
Makes warnings/errors visible when building with V=w/V=1.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35720
2013-02-21 11:45:31 +00:00
Jonas Gorski b91eab631b ar71xx: print image build warnings/errors to stderr
Makes warnings/errors visible when building with V=w/V=1.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35719
2013-02-21 11:45:29 +00:00
Gabor Juhos fad3fc1ad0 mpc85xx: add kmod-leds-gpio to the default packages
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35708
2013-02-21 10:26:03 +00:00
Gabor Juhos c837cae29c mpc85xx: disable a bunch of unused device nodes on the TL-WDR4900
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35707
2013-02-21 10:26:00 +00:00
Hauke Mehrtens 9afdb046d3 brcm47xx: do not use vlan0 any more.
The Broadcom switch driver says that vlan0 should not be used with any switch other than bcm5325.

This makes OpenWrt always use vlan1 and vlan2 instead.

SVN-Revision: 35704
2013-02-20 15:31:43 +00:00
Gabor Juhos 4305c6cda1 mpc85xx: add kernel support for the TL-WDR4900 v1 board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35690
2013-02-20 08:27:27 +00:00
Gabor Juhos 33ba984628 mpc85xx: use a foreach loop to copy boot images
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35689
2013-02-20 08:27:26 +00:00
Gabor Juhos 4341b11f3e ar71xx: remove __dev{init,exit} annotations from kernel files
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35687
2013-02-19 20:52:06 +00:00
Gabor Juhos 7d0d29ab6e linux/3.8: add missing Kconfig symbols
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35686
2013-02-19 20:52:03 +00:00
Gabor Juhos 76b797c759 mpc85xx: add default profile
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35677
2013-02-19 14:53:17 +00:00
Gabor Juhos debb9a4a97 mpc85xx: add gpio-keys to OF match table
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35676
2013-02-19 14:53:16 +00:00
Gabor Juhos 69cc70a43c mpc85xx: enable squashfs feature
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35675
2013-02-19 14:53:15 +00:00
Gabor Juhos ae9100e969 mpc85xx: add swconfig to default packages
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35674
2013-02-19 14:53:12 +00:00
Gabor Juhos ed0f43f1e2 kernel: update linux 3.8-rcX to 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35672
2013-02-19 09:17:38 +00:00
Florian Fainelli 1dd9e661be x86/rdc: migrate to common led helper functions
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35664
2013-02-18 10:38:05 +00:00
Florian Fainelli 677714309b rb532: migrate platform to common led helper functions
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35663
2013-02-18 10:38:02 +00:00
Florian Fainelli 2bfa1ed82c cobalt: migrate platform to common led helper functions
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35662
2013-02-18 10:37:58 +00:00
Florian Fainelli d7092aceb8 brcm63xx: migrate platform to common led helper functions
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35661
2013-02-18 10:37:55 +00:00
Florian Fainelli 5953e79888 au1000: migrate to common led helper functions
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35660
2013-02-18 10:37:52 +00:00
Florian Fainelli 15b66e0cbe ar7: migrate to common led helper functions
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35659
2013-02-18 10:37:43 +00:00
Gabor Juhos 90011a99f3 ramips: migrate to common led helper functions
[juhosg: migrate to status_led_blink_{preinit,failsafe} helpers]

Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35652
2013-02-18 09:56:29 +00:00
Gabor Juhos 32b41c4dd0 cns21xx: migrate to common led helper functions
[juhosg: migrate to status_led_blink_{preinit,failsafe} helpers]

Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35651
2013-02-18 09:56:28 +00:00
Gabor Juhos f6691c09c1 ar71xx: migrate to common led helper functions
[juhosg: migrate to status_led_blink_{preinit,failsafe} helpers]

Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35650
2013-02-18 09:56:27 +00:00
Gabor Juhos 546b336d2d adm5120: migrate to common led helper functions
[juhosg: migrate to status_led_blink_{preinit,failsafe} helpers]

Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35649
2013-02-18 09:56:26 +00:00
Gabor Juhos 3f749d1e8e kernel: update linux 3.7 to 3.7.9
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35644
2013-02-17 21:32:42 +00:00
Gabor Juhos 451dd745bd generic: ar8216: cleanup function/variable names
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35642
2013-02-17 12:48:25 +00:00
Gabor Juhos 51996304c4 generic: ar8216: rename struct ar8216_priv to ar8xxx_priv
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35641
2013-02-17 12:48:23 +00:00
Gabor Juhos 4215b1c93c ar71xx: add user-space support for the Mikrotik RB951G board
[juhosg: change rb-951g to rb-951g-2hnd in the scripts]

Patchwork: http://patchwork.openwrt.org/patch/3257/
Signed-off-by: Kamil Trzcinski <ayufan@ayufan.eu>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35634
2013-02-17 10:08:41 +00:00
Gabor Juhos 7a709573d7 ar71xx: add kernel support for the Mikrotik RB951G board
This is platform definition for the RB951G device. It's mostly rework
of RB2011UAS patchset with network taken from the RB751 patches.
The main difference is the flash layout used by this device.

[juhosg:
  - remove dead code from mach-rb951g
  - add "-2HnD" suffix to the machine name
  - use a separate 615-MIPS-ath79-RB951G-support.patch]

Patchwork: http://patchwork.openwrt.org/patch/3257/
Signed-off-by: Kamil Trzcinski <ayufan@ayufan.eu>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35633
2013-02-17 10:08:35 +00:00
Hauke Mehrtens 1a8218d6e4 brcm47xx: add initial support for kernel 3.8
This contains the following new bigger changes:
 * new partition parser which still could lake some features or have bugs
 * new nand flash driver
 * using physmap-flash flash driver for parallel flash
 * some changes to the serial flash driver

With these changes OpenWrt starts using more of the mainline flash drivers.

SVN-Revision: 35632
2013-02-16 20:28:24 +00:00
Gabor Juhos 17c36f540c ar71xx: fix kmod-usb2 package name
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35629
2013-02-16 17:33:06 +00:00
Gabor Juhos 4375dae6d3 ramips: fix kmod-usb2 package name
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35628
2013-02-16 17:26:52 +00:00
Gabor Juhos 62e80eba31 mpc85xx: add input drivers to default packages, and load those during preinit
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35626
2013-02-16 17:13:38 +00:00
Hauke Mehrtens ce6a7543fe brcm47xx: BGMAC - Adjust AutoLoad number to be prior to switch modules
Adjust the "AutoLoad" number for the BGMAC module to be prior
to the switch modules.  This probably isn't real important as
the modules are loaded in the correct order by preinit anyway.

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 35625
2013-02-16 16:27:33 +00:00
Hauke Mehrtens 9de704a03b brcm47xx: improve cpuport detection for filesafe
Do not try to load bcm57xx.ko any more this is not needed for kernel 2.6 and 3.X
Ask the switch driver where the CPU port is.

SVN-Revision: 35624
2013-02-16 16:24:15 +00:00
Hauke Mehrtens 92d16f38d7 brcm47xx: fix network config on simpleshare
The included patch will generate a correct network configuration on the simpletech simpleshare.

Thank you for the patch Will Holmes (RealOpty)

This closes #12361.

SVN-Revision: 35623
2013-02-16 15:24:48 +00:00
Hauke Mehrtens a21ba013f5 brcm47xx: handle return values of cfe_env_get() correctly.
This closes #12746.

SVN-Revision: 35622
2013-02-16 15:19:24 +00:00
Hauke Mehrtens 283bff02a2 brcm47xx: bgmac: fix unaligned accesses to network headers.
SVN-Revision: 35621
2013-02-16 14:38:17 +00:00
Hauke Mehrtens 5fed2916c3 brcm47xx: fix unaligned access to mac address
The mac address should be aligned to u16 to prevent an unaligned access
in drivers/ssb/pci.c where it is casted to __be16.

This closes #9824.

SVN-Revision: 35618
2013-02-16 13:46:00 +00:00
Hauke Mehrtens d9580d224a brcm47xx: try to automatically detect if the wan port is at port 4 and not at port 0.
This should fix #13000.

SVN-Revision: 35617
2013-02-16 12:37:24 +00:00
Gabor Juhos 7f20c2e19a update x86 generic to kernel v3.7
Signed-off-by: Russell Senior <russell@personaltelco.net>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35616
2013-02-16 12:12:52 +00:00
Gabor Juhos 7fd8525853 ramips: use the new macaddr_* helpers instead of maccalc
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35615
2013-02-16 11:50:25 +00:00
Gabor Juhos 753d713e92 ramips: use the mtd_get_mac_* helpers
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35613
2013-02-16 11:50:21 +00:00
Jonas Gorski dd77663fb0 kernel: add missing config options
r35336 exposed PTP, which has additional drivers on ixp4xx, causing it to
not build with PTP enabled.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35611
2013-02-16 11:39:45 +00:00
Jonas Gorski 485e52e1d8 bcm63xx: make nvram checksum failures non fatal
fixes #12982.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35605
2013-02-15 12:23:49 +00:00
Gabor Juhos 162b8e23a5 kernel: update linux 3.7 to 3.7.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35604
2013-02-15 07:36:15 +00:00
Gabor Juhos f35c369710 generic: ar8216: move PHY4 RGMII workaround code out of the loop
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35603
2013-02-14 14:55:40 +00:00
Gabor Juhos d64888ffc0 generic: ar8216: register the switch from the probe routine
Currently the switch gets registered when an ethernet
driver connects to a PHY of the switch. This method does
not work with the ethernet drivers which are connecting
to the PHY from their ndo_open callback. With those
ethernet drivers, the driver tries to register the switch
each time when the etherned device is opened and this causes
a deadlock.

Move the switch registration into the probe routine to fix
this problem.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35602
2013-02-14 14:01:24 +00:00
Florian Fainelli 31dc805f88 x86: update config-3.7 for x86 (turn off CONFIG_GPIO_ICH)
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35601
2013-02-14 13:00:07 +00:00
Hauke Mehrtens c0f6c75cf7 brcm47xx: if the cpuport of the switch is port 8 assume vlan0ports: "1 2 3 4 8" and vlan0ports: "0 8"
SVN-Revision: 35597
2013-02-14 12:38:16 +00:00
Gabor Juhos 9d86ba2ed4 mpc85xx: enable swconfig and the ar8216 driver
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35592
2013-02-13 16:51:23 +00:00
Gabor Juhos 6d18518e02 mpc85xx: enable the squashfs driver
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35591
2013-02-13 16:51:21 +00:00
Gabor Juhos c3b3f77621 mpc85xx: enable XZ_DEC_BCJ and XZ_DEC_POWERPC support
Squashfs is unable to decompress some blocks without that:

[  199.494500] SQUASHFS error: xz_dec_run error, data probably corrupt
[  199.500910] SQUASHFS error: squashfs_read_data failed to read block 0xbff26
[  199.508016] SQUASHFS error: Unable to read data cache entry [bff26]
[  199.514440] SQUASHFS error: Unable to read page, block bff26, size 153f8
[  199.521311] SQUASHFS error: Unable to read data cache entry [bff26]
[  199.527724] SQUASHFS error: Unable to read page, block bff26, size 153f8
[  199.534594] SQUASHFS error: Unable to read data cache entry [bff26]
[  199.541009] SQUASHFS error: Unable to read page, block bff26, size 153f8

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35590
2013-02-13 16:51:19 +00:00
Gabor Juhos 7484006498 ar71xx: fix factory image creation for dir-825-c1
Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35589
2013-02-13 16:36:26 +00:00
Gabor Juhos 5f10ec3c36 ar71xx: fix switch-config for dir-825-c1
Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35588
2013-02-13 16:36:23 +00:00
Hauke Mehrtens 54ca3eed5d brcm47xx: configure vlan correctly on some recent devices.
SVN-Revision: 35587
2013-02-13 16:05:52 +00:00
Hauke Mehrtens 4663d424a3 brcm47xx: add some more fixes to bgmac
Thank you Rafał Miłecki and Nathan Hintz

SVN-Revision: 35574
2013-02-12 20:10:38 +00:00
Hauke Mehrtens 7c0208b336 brcm47xx: update tg3 to the version send upstream
SVN-Revision: 35573
2013-02-12 20:09:15 +00:00
Luka Perkov 7973ef64d6 mvebu: remove boards suffix
SVN-Revision: 35572
2013-02-12 10:18:53 +00:00
Gabor Juhos bae4bfe3f8 kernel: update linux 3.7 to 3.7.7
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35571
2013-02-12 09:51:11 +00:00
Gabor Juhos 1f9ede9cfc ar71xx: add script for automatic switch name migration
Thanks to Jonas Gorski for the help.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35567
2013-02-11 21:41:16 +00:00
Felix Fietkau 2e7a4b088d ar71xx: allow unknown multicast frames to pass to the CPU on AR934x
SVN-Revision: 35564
2013-02-11 18:59:05 +00:00
Gabor Juhos 9525a075c1 ar8216: remove superfluous code from ar8216_config_init
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35562
2013-02-11 16:57:31 +00:00
Gabor Juhos 94806a13af ar71xx: use switchX names in network configuration
Accessing the AR8xxx switches via the name of the
attached ethernet device is not possible since
r35560. Change the uci-defaults script to use
switchX names in switch configurations.

Reported-by: Jonas Gorski <jogo@openwrt.org>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35561
2013-02-11 16:54:52 +00:00
Gabor Juhos 9c86d268eb generic: ar8216: don't use ethernet device name in register_switch
The switches are accessed via an MDIO bus. Set the alias
to the name of the MDIO bus, and show that in the message
along with the name of the switch switch device.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35560
2013-02-11 16:11:31 +00:00
Gabor Juhos 3f3eba88f6 generic: ar8216: reuse the private data from ar8216_probe
The private data of the switch is already
allocated in ar8216_priv, assign that to
each PHY on the same MDIO bus. Also remove
the redundant code from ar8216_config_init.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35559
2013-02-11 16:11:30 +00:00
Gabor Juhos 1afb759b35 generic: ar8216: use phydev instead of pdev everywhere
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35555
2013-02-11 13:25:43 +00:00
Gabor Juhos 0b1fe07e8e generic: ar8216: use pr_* macros for kernel messages
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35554
2013-02-11 13:14:00 +00:00
Gabor Juhos eea297884e generic: ar8216: fix PHY features setup
Sujith says:

This commit breaks the WAN port on my AP96 - DHCP fails.
Reverting it fixes the issue.

  commit b67cc3a0cdd02973610d4d5a63226d1c44841e94
  Author: juhosg <juhosg@3c298f89-4303-0410-b956-a3cf2f4a3e73>
  Date:   Fri Feb 8 09:13:18 2013 +0000

    generic: ar8216: simplify phy features setup

    Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

    git-svn-id: svn://svn.openwrt.org/openwrt/trunk@355183c298f89-4303-0410-b956-a3cf2f4a3e73

This change restores the previous behaviour and moves
the code into the ar8216_probe function.

Reported-by: Sujith Manoharan <sujith@msujith.org>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Tested-by: Sujith Manoharan <sujith@msujith.org>

SVN-Revision: 35549
2013-02-11 10:05:35 +00:00
Gabor Juhos 617076c613 generic: ar8216: add ar8xxx_probe_switch helper
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35547
2013-02-10 19:02:01 +00:00
Gabor Juhos 98b13e39ac generic: ar8216: rename ar8xxx_mib_cleanup to ar8xxx_mib_stop
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35546
2013-02-10 18:42:08 +00:00
Gabor Juhos f97170a720 generic: ar8216: free mib counters from ar8xxx_free
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35545
2013-02-10 18:42:07 +00:00
Gabor Juhos 7924e517af generic: ar8216: add ar8xxx_free helper
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35544
2013-02-10 18:42:05 +00:00
Gabor Juhos 77b3c551c4 generic: ar8216: add ar8xxx_create{,mii} helpers
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35543
2013-02-10 18:42:04 +00:00
Gabor Juhos 5f70b1db2a generic: ar8216: remove redundant phy address check
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35542
2013-02-10 18:38:12 +00:00
Gabor Juhos 14fd37258b generic: ar8216: only set phy_ptr if packet mangling is used
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35541
2013-02-10 18:38:10 +00:00
Gabor Juhos 393163b098 generic: ar8216: add defines for the AR8316 POSTRIP register
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35539
2013-02-10 13:18:48 +00:00
Gabor Juhos 5ed480598d generic: ar8216: don't probe the chip multiple times
It is only needed when the private data is allocated.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35538
2013-02-10 13:05:15 +00:00
Gabor Juhos 774da6c7a4 generic: ar8216: add sanity check to ar8216_probe
Verify that the mdio bus has PHY devices with
a supported PHY ID at address 0-4.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35537
2013-02-10 13:05:14 +00:00
Gabor Juhos 4720c75cf7 generic: ar8216: skip probe on unused PHY addresses
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35536
2013-02-10 13:05:12 +00:00
Jonas Gorski f07a33afc2 ar71xx: register the micro sd card reader on RB493G
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35535
2013-02-10 12:31:38 +00:00
Jonas Gorski eedc3554fe generic: b53: fix reverted error check in probe
b53_switch_detect returns value returned by b53_read8, which is 0 for
success. So fail (and return error) only if b53_switch_detect returned
something else than 0. This fixes supported and advertising being zeros
for MDIO access.

Cc: Jonas Gorski <jogo@openwrt.org>
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 35534
2013-02-10 12:31:36 +00:00
Jonas Gorski 200359a520 bcm63xx: handle huawei nvram layout
Use a different length for calculating the nvram checksum on hauwei
boards. Fixes boot on HW553 and HW556.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35533
2013-02-10 12:31:31 +00:00
Gabor Juhos de123c4409 generic: ar8216: move sleep out of the loop
It is enough to sleep once after ANEG is enabled on
all PHYs. This reduces boot time on boards with
AR8316 switch.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35532
2013-02-09 13:26:04 +00:00
Gabor Juhos 6ff973bdda ar71xx: Routerboard 751 Mac Address Offset Fix
We utilize many Routerboard 751's and discovered that our latest batch
of RB751's would not initialize the wireless radio. We have determined
Mikrotik has changed where the mac address was located inside hardconfig.
As such we utilize "routerboot_find_tag" to find the location of the mac
address. We should remove "RB751_MAC_ADDRESS_OFFSET" as it is ambiguous
by machine manufacturing date. The newer batch of RB751's that we received
had a RB751_MAC_ADDRESS_OFFSET 0x10.

Signed-off-by: Davey Hutchison <dhutchison@bluemesh.net>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35519
2013-02-08 09:34:53 +00:00
Gabor Juhos aa04441904 generic: ar8216: simplify phy features setup
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35518
2013-02-08 09:13:18 +00:00
Gabor Juhos 9c1f95a416 generic: ar8216: don't use mdio bus specific functions in ar8216_id_chip
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35517
2013-02-08 09:13:14 +00:00
Gabor Juhos 5393efc0c7 generic: ar8216: use inline function to convert swdev to ar8216
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35514
2013-02-07 15:18:36 +00:00