brcm47xx: do not use vlan0 any more.

The Broadcom switch driver says that vlan0 should not be used with any switch other than bcm5325.

This makes OpenWrt always use vlan1 and vlan2 instead.

SVN-Revision: 35704
owl
Hauke Mehrtens 2013-02-20 15:31:43 +00:00
parent 9622f68581
commit 9afdb046d3
3 changed files with 43 additions and 43 deletions

View File

@ -81,10 +81,10 @@ start() {
BEGIN {
FS="="
c["lan_ifname"]="eth0.0"
c["wan_ifname"]="eth0.1"
c["vlan0ports"]="1 2 3 4 5"
c["vlan1ports"]="0 5"
c["lan_ifname"]="eth0.1"
c["wan_ifname"]="eth0.2"
c["vlan1ports"]="1 2 3 4 5"
c["vlan2ports"]="0 5"
getline < "/proc/diag/model"
model=$0
for (i = 0; i < 6; i++) {
@ -95,8 +95,8 @@ start() {
getline < "/proc/switch/eth0/cpuport"
cpuport=$0
if (cpuport == "8") {
c["vlan0ports"]="1 2 3 4 8"
c["vlan1ports"]="0 8"
c["vlan1ports"]="1 2 3 4 8"
c["vlan2ports"]="0 8"
}
}
}
@ -109,13 +109,13 @@ start() {
END {
if (((nvram["vlan0ports"] ~ /^0 1 2 3 8/ ) && (nvram["vlan1ports"] ~ /^4 8/ && (cpuport == "8"))) || \
((nvram["vlan1ports"] ~ /^0 1 2 3 8/ ) && (nvram["vlan2ports"] ~ /^4 8/ && (cpuport == "8")))) {
c["vlan0ports"] = "0 1 2 3 8"
c["vlan1ports"] = "4 8"
c["vlan1ports"] = "0 1 2 3 8"
c["vlan2ports"] = "4 8"
}
if (((nvram["vlan0ports"] ~ /^0 1 2 3 5/ ) && (nvram["vlan1ports"] ~ /^4 5/ && (cpuport == "5"))) || \
((nvram["vlan1ports"] ~ /^0 1 2 3 5/ ) && (nvram["vlan2ports"] ~ /^4 5/ && (cpuport == "5")))) {
c["vlan0ports"] = "0 1 2 3 5"
c["vlan1ports"] = "4 5"
c["vlan1ports"] = "0 1 2 3 5"
c["vlan2ports"] = "4 5"
}
if ((model == "ASUS WL-HDD") || (model == "ASUS WL-300g") || (model == "Linksys WAP54G V1")) {
c["wan_ifname"] = ""
@ -123,23 +123,23 @@ start() {
}
if (model == "ASUS WL-330gE") {
c["wan_ifname"] = ""
c["lan_ifname"] = "eth0.0"
c["vlan0ports"] = "4 5"
c["vlan1ports"] = ""
c["lan_ifname"] = "eth0.1"
c["vlan1ports"] = "4 5"
c["vlan2ports"] = ""
}
if ((model == "ASUS WL-500g") || (model == "Microsoft MN-700")) {
c["wan_ifname"] = "eth1"
c["lan_ifname"] = "eth0"
}
if ((model == "ASUS WL-500g Premium V2") || (model == "Dell TrueMobile 2300 v2") || (model == "Buffalo WHR-G125")) {
c["vlan0ports"] = "0 1 2 3 5"
c["vlan1ports"] = "4 5"
c["vlan1ports"] = "0 1 2 3 5"
c["vlan2ports"] = "4 5"
}
if (model == "Dell TrueMobile 2300") {
c["lan_ifname"] = "eth0"
c["wan_ifname"] = "eth1"
c["vlan0ports"] = "0 1 2 3 4 5u"
c["vlan1ports"] = ""
c["vlan1ports"] = "0 1 2 3 4 5u"
c["vlan2ports"] = ""
}
if (nvram["boardtype"] == "bcm94710r4") {
# Toshiba WRC-1000
@ -147,18 +147,18 @@ start() {
c["wan_ifname"] = "eth1"
}
if ((nvram["boardtype"] == "wgt634u") || (nvram["boardtype"] == "0x0467")) {
c["vlan0ports"] = "0 1 2 3 5"
c["vlan1ports"] = "4 5"
c["vlan1ports"] = "0 1 2 3 5"
c["vlan2ports"] = "4 5"
}
if ((nvram["boardtype"] == "0x042f") || (nvram["boardtype"] == "0x0472")) {
if (nvram["boardnum"] == "45") {
# WL-500gP
c["vlan0ports"] = "1 2 3 4 5"
c["vlan1ports"] = "0 5"
c["vlan1ports"] = "1 2 3 4 5"
c["vlan2ports"] = "0 5"
} else {
# Generic BCM94704
c["vlan0ports"] = "0 1 2 3 4 5u"
c["vlan1ports"] = ""
c["vlan1ports"] = "0 1 2 3 4 5u"
c["vlan2ports"] = ""
c["lan_ifname"] = "eth0"
c["wan_ifname"] = "eth1"
@ -171,8 +171,8 @@ start() {
}
# Buffalo WBR-B11 and Buffalo WBR-G54
if (nvram["boardtype"] == "bcm94710ap") {
c["vlan0ports"] = "0 1 2 3 4 5u"
c["vlan1ports"] = ""
c["vlan1ports"] = "0 1 2 3 4 5u"
c["vlan2ports"] = ""
c["lan_ifname"] = "eth0"
c["wan_ifname"] = "eth1"
}
@ -196,41 +196,41 @@ start() {
# Generic BCM94704 settings instead so we revert to proper settings here.
# Hopefully someone will fix this properly soon.
if (model == "ASUS WL-700gE") {
c["lan_ifname"]="eth0.0"
c["wan_ifname"]="eth0.1"
c["vlan0ports"]="1 2 3 4 5"
c["vlan1ports"]="0 5"
c["lan_ifname"]="eth0.1"
c["wan_ifname"]="eth0.2"
c["vlan1ports"]="1 2 3 4 5"
c["vlan2ports"]="0 5"
}
if ((model == "Motorola WR850G V2/V3") || (model == "Siemens SE505 V2")) {
c["vlan0ports"]="0 1 2 3 5"
c["vlan1ports"]="4 5"
c["vlan1ports"]="0 1 2 3 5"
c["vlan2ports"]="4 5"
}
if (model == "ASUS WL-500W") {
c["lan_ifname"] = "eth0"
c["wan_ifname"] = "eth1"
c["vlan0ports"] = "0 1 2 3 4 5u"
c["vlan1ports"] = ""
c["vlan1ports"] = "0 1 2 3 4 5u"
c["vlan2ports"] = ""
}
if (model == "OvisLink WL-1600GL") {
c["lan_ifname"] = "eth0.0"
c["wan_ifname"] = "eth0.1"
c["vlan0ports"] = "0 1 2 3 5"
c["vlan1ports"] = "4 5"
c["lan_ifname"] = "eth0.1"
c["wan_ifname"] = "eth0.2"
c["vlan1ports"] = "0 1 2 3 5"
c["vlan2ports"] = "4 5"
}
if (model == "SimpleTech SimpleShare NAS") {
c["lan_ifname"] = "eth0"
c["wan_ifname"] = ""
c["vlan0ports"] = ""
c["vlan1ports"] = ""
c["vlan2ports"] = ""
}
if (c["vlan0ports"] || c["vlan1ports"]) {
if (c["vlan1ports"] || c["vlan2ports"]) {
print "#### VLAN configuration "
print "config switch eth0"
print " option enable 1"
print ""
vlan(0, "vlan0ports")
vlan(1, "vlan1ports")
vlan(2, "vlan2ports")
}
print "#### Loopback configuration"
print "config interface loopback"

View File

@ -3,7 +3,7 @@
failsafe_ip() {
[ -d /proc/switch/eth0 ] && [ "$ifname" = "eth0" ] && {
ifconfig eth0 0.0.0.0 down
echo "0 1 2 3 4 ${cpu_port:-5u*}" > /proc/switch/eth0/vlan/0/ports
echo "0 1 2 3 4 ${cpu_port:-5u*}" > /proc/switch/eth0/vlan/1/ports
}
[ -n "$pi_ifname" ] && grep -q "$pi_ifname" /proc/net/dev && {

View File

@ -27,11 +27,11 @@ preinit_net_echo() {
# this would be easier if we blasted the message across all ports
# but we don't want packets leaking across interfaces
for port in $(seq 0 4); do {
echo "$port ${cpu_port:-5u*}" > /proc/switch/eth0/vlan/0/ports
echo "$port ${cpu_port:-5u*}" > /proc/switch/eth0/vlan/1/ports
port_net_echo $1
}; done
echo "0 1 2 3 4 ${cpu_port:-5u*}" > /proc/switch/eth0/vlan/0/ports
echo "0 1 2 3 4 ${cpu_port:-5u*}" > /proc/switch/eth0/vlan/1/ports
} || port_net_echo $1
}