Commit Graph

10818 Commits (125fc703bb1477599809db96e5d62a1915864fad)

Author SHA1 Message Date
Gabor Juhos ac28225e24 generic/3.10: reduce number of ifdefs in the rootfs split code
Use the config_enabled() macro where it is possible.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37980
2013-09-14 10:19:09 +00:00
Luka Perkov 02e858d88c imx6: add network defaults for GW5400-A
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37979
2013-09-13 21:50:35 +00:00
Hauke Mehrtens b73b915c54 brcm47xx: board detection, GPIO for Linksys E1000 V2.1
This patch adds board detection for the Linksys E1000 V2.1 router, as well
as GPIO support for same.

This fixes bug #14135. Currently, wired networking isn't working on the
router, and I haven't tried the wireless, but with this patch, OpenWRT
successfully boots, and all the LEDs and buttons work properly.

Signed-off-by: Zachary Catlin <zcatlin@indiana.edu>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37977
2013-09-13 19:24:08 +00:00
Gabor Juhos 0aa1f0be43 ar71xx: refresh patches
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37976
2013-09-13 17:29:16 +00:00
Gabor Juhos 3a241f67a7 generic/3.10: refresh patches
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37975
2013-09-13 17:29:14 +00:00
Gabor Juhos 2d49e32715 generic/3.10: rename mtd patches
- change patch numbers to group the related stuff together,
  - add mtd prefix where it is missing,
  - use hyphens in the patch names

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37974
2013-09-13 17:24:25 +00:00
Gabor Juhos ad1c38fe97 cns21xx: remove 3.8 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37973
2013-09-13 16:39:36 +00:00
Gabor Juhos c1c0d14192 cns21xx: switch to 3.10
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37972
2013-09-13 16:39:34 +00:00
Gabor Juhos 2421534612 cns21xx: add support for 3.10
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37971
2013-09-13 16:39:33 +00:00
Hauke Mehrtens 9141ab0ede brcm47xx: detect WRT310NV1
Thanks Devastator for testing

SVN-Revision: 37969
2013-09-13 15:56:35 +00:00
Gabor Juhos 826ef50014 cns21xx: make cns21xx-ehci a separate driver
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37968
2013-09-13 15:38:42 +00:00
Gabor Juhos 3b30bd5793 cns21xx: disable legacy PTY devices
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37967
2013-09-13 15:38:41 +00:00
Gabor Juhos 2af5facb25 cns21xx: fix broken case statement in led defaults file
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37966
2013-09-13 15:38:40 +00:00
Gabor Juhos 5e8df6f5bb cns21xx: enable XZ_DEC_ARM and XZ_DEC_BCJ kernel options
Squashfs is unable to decompress some blocks without that:

  [    0.970000] SQUASHFS error: xz_dec_run error, data probably corrupt
  [    0.980000] SQUASHFS error: squashfs_read_data failed to read block 0x29a72
  [    0.990000] SQUASHFS error: Unable to read fragment cache entry [29a72]
  [    1.000000] SQUASHFS error: Unable to read page, block 29a72, size 14c50
  [    1.010000] SQUASHFS error: Unable to read fragment cache entry [29a72]
  [    1.020000] SQUASHFS error: Unable to read page, block 29a72, size 14c50
  [    1.260000] SQUASHFS error: xz_dec_run error, data probably corrupt

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37965
2013-09-13 15:38:39 +00:00
Gabor Juhos 9754aca374 ar71xx: add support for TL-MR3040 v2
This patch adds support for building firmware images for the
TP-Link TL-MR3040 v2. Tested and working on v2.1 hardware.

Signed-off-by: Mads Hansen <d@taba.se>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37964
2013-09-13 15:28:50 +00:00
Gabor Juhos 897c00c145 ar71xx: add wireless bgn led support for dir-825-c1
I checked the GPL code drop from D-Link and tried to get the wireless
and LAN switch LEDs to light up. I found some references in
AthSDK/www/DIR-825_C1/bsp.h as well as
AthSDK/www/DIR-825_C1/rootfs/etc/sysconfig/S2gpio.sh, but in the end I
only got the led for 2.4GHz to work. Anyway, here's the patch.

Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37963
2013-09-13 15:01:40 +00:00
Hauke Mehrtens 0a0257d70e brcm47xx: remove support for kernel 3.8
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37959
2013-09-12 22:07:12 +00:00
Hauke Mehrtens b4880b34ef brcm47xx: add default config for new kernel config option
SVN-Revision: 37958
2013-09-12 22:04:55 +00:00
Hauke Mehrtens 614e8f44bd kernel: update bcma and ssb to wireless-testing master-2013-09-09
SVN-Revision: 37957
2013-09-12 22:03:45 +00:00
Luka Perkov ed6d759f39 kernel: add support for ESMT F25L32PA with upstream submission
Signed-off-by: Flavio Silveira <fggs@terra.com.br>

SVN-Revision: 37956
2013-09-12 14:38:48 +00:00
Felix Fietkau 8eb57d0cd7 kernel: align the skb padding to power of two
The skb is usually started by a padding which allows the protocols in the
network stack to add their headers in front of the payload. The skb can be
reallocated in case the preallocated padding is not large enough. This can for
example happen in the function __skb_cow which will check the requested extra
headroom and allocate more buffer when the requested headroom is bigger than
the available one. The extra buffer is aligned again to the multiple of the
NET_SKB_PAD of the target architecture.

The macro used to create the multiple of the NET_SKB_PAD is written in a way
which allows only values power two as alignment parameter. The currently used
value of 48 bytes can not be written as n ** 2 but as 2 ** 4 + 2 ** 5. The
extra buffer is therefore not always the multiple of 48 but can be 16, 64, 80,
128, 144 and so on. The generated values are also not monotonic (48 requested
bytes are mapped to 80 allocated bytes and 49 requested bytes are mapped to 64
allocated bytes).

These unexpected small values result in more reallocations of the buffer. This
was noticed prominently during tests between two QCA9558 720 MHz devices which
were connected via ethernet to PCs and had a HT40 802.11n 3x3 link between each
other. The throughput PC-to-PC during iperf TCP runs increased reliable from
186 Mibit/s to 214 Mibit/s in one direction and from 195 Mibit/s to 220 Mibit/s
in the other direction. This is a performance increase of ~14% just by reducing
the amount of reallocations.

Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 37948
2013-09-11 14:30:15 +00:00
Florian Fainelli 4434bc361d kernel: fix broken depends syntax introduced in r37933
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 37942
2013-09-11 12:45:24 +00:00
Florian Fainelli 3668004858 kernel: Fix FIQ code on VIVT CPUs (#14145)
Backport an upstream patch to fix FIQ code on VIVT CPUs

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 37940
2013-09-11 12:08:44 +00:00
Luka Perkov 2964a11933 imx6: backport ahci support
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37936
2013-09-10 22:26:36 +00:00
Luka Perkov b2c852e685 imx6: add i2c retry on NAK
Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 37935
2013-09-10 22:26:34 +00:00
Luka Perkov 460fb06e63 imx6: add gpio sysfs support
Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 37934
2013-09-10 22:26:33 +00:00
Luka Perkov 7d73153e86 kernel: allow hwmon GSC driver for all targets
- enable using hwmon GSC driver on all targets
- add a kmod package for it

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 37933
2013-09-10 22:26:30 +00:00
Felix Fietkau 11926c2fd8 kernel: fix arch-dependent bug in hso module
Currently, the module causes an oops at least on rt5350. These patches
have been accepted upstream at:
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net.git

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>

SVN-Revision: 37931
2013-09-10 13:47:44 +00:00
Hauke Mehrtens f181b07af8 brcm47xx: add me as maintainer
SVN-Revision: 37916
2013-09-07 15:46:27 +00:00
Gabor Juhos abad211388 ar71xx: use the lzma loader for the WRT160NL
Partition layout before:
  0x000000040000-0x0000001a0000 : "kernel"
  0x0000001a0000-0x0000007e0000 : "rootfs"
  mtd: partition "rootfs" set to be root filesystem
  mtd: partition "rootfs_data" created automatically, ofs=0x350000, len=0x490000
  0x000000350000-0x0000007e0000 : "rootfs_data"

after:
  0x000000040000-0x000000140000 : "kernel"
  0x000000140000-0x0000007e0000 : "rootfs"
  mtd: partition "rootfs" set to be root filesystem
  mtd: partition "rootfs_data" created automatically, ofs=0x2f0000, len=0x4f0000
  0x0000002f0000-0x0000007e0000 : "rootfs_data"

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37915
2013-09-07 11:40:45 +00:00
Gabor Juhos f346e316b4 ppc40x: remove 3.8 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37914
2013-09-07 11:34:08 +00:00
Gabor Juhos 8505ccfe74 ppc40x: switch to 3.10
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37913
2013-09-07 11:34:06 +00:00
Gabor Juhos e9d7620196 ppc40x: add support for 3.10
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37912
2013-09-07 11:34:03 +00:00
Jonas Gorski f8cd14921d brcm63xx: drop linux 3.9 support
It is EOL since quite a while, so no need to keep it around.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 37911
2013-09-06 19:01:17 +00:00
Jonas Gorski dc028776f0 brcm63xx: switch to linux 3.10
3.10 is stable enough, and 3.9 is EOL since a while.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 37910
2013-09-06 19:01:13 +00:00
Jonas Gorski 4b0655500a kernel: b53: support phy ids for BCM5365
BCM5365 (and probably other older variants) use a different phy id, so
the phy driver never attached for them.
Fix this by adding the appropriate phy id to the fixup and the phy
driver.

Reported-by: Russell Senior <russell@personaltelco.net>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 37906
2013-09-05 20:30:34 +00:00
Imre Kaloz 445d1a8b27 Add missing symbol
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 37897
2013-09-05 10:08:59 +00:00
Hauke Mehrtens 4eced13a37 kernel: b53: allow access the MIB counters on BCM5365
b53_no_ops has no elements and b53_port_ops has one element, this makes
the code access some random memory when trying to access the mib
counter functions.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37895
2013-09-04 16:15:10 +00:00
Gabor Juhos 07216b9f46 ar71xx: fix NetGear initramfs image names
The '-initramfs' string is duplicated in the image names,
fix it.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37892
2013-09-03 07:22:27 +00:00
Gabor Juhos d120ec18b2 kernel: update 3.10 to 3.10.10
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37890
2013-09-02 19:12:54 +00:00
Gabor Juhos c8cd8c94d8 ar71xx: image: reorder Image/Build/* macros
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37889
2013-09-02 19:05:58 +00:00
Gabor Juhos 1712fdd658 ar71xx: image: simplify more oneliner macros
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37888
2013-09-02 19:05:57 +00:00
Gabor Juhos 02551d3883 ar71xx: image: simplify oneliner loader macros
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37887
2013-09-02 19:05:56 +00:00
Gabor Juhos 0cdf133d20 ar71xx: image: simplify oneliner initramfs macros
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37886
2013-09-02 19:05:55 +00:00
Gabor Juhos b125a0f6b9 ar71xx: image: simplify oneliner buildkernel macros
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37885
2013-09-02 19:05:54 +00:00
Florian Fainelli 33e7337d97 mcs814x: dlan-usb-extender: fix usbdev trigger
Every device I connect to the USB port is detected as 2-1, not 1-1.
So adjust the default setting accordingly.

Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 37882
2013-09-02 18:25:01 +00:00
Gabor Juhos 4a11acf81b ar71xx: optimize kernel generation
When the squashfs and jffs2 images are generated
in the same turn, the compressed kernel images
are generated twice with the same parameters.

Move compressed kernel generation into a separate
phase to avoid that.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37881
2013-09-02 18:03:39 +00:00
Gabor Juhos 0950922925 generic: remove linux version checks from myloader.c
The myloader partition parser code uses ifdef wrappers
to make the code usable on kernels below version 3.2.
All targets are using kernel 3.3 at least so the wraper
is not needed. Remove that.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37880
2013-09-02 16:33:13 +00:00
Gabor Juhos 0ceeb6a068 ar71xx: image: dynamically generate Image/Build/Template/* macros
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37879
2013-09-02 16:10:44 +00:00
Gabor Juhos 122a61aa49 ar71xx: configure OBS4 line on TL-WR841N-v8/MR3420v2
It also fixes USB Power on MR3420v2.

This time we took the information from the source of GPL:
http://www.mail-archive.com/openwrt-devel@lists.openwrt.org/msg18970.html
Confirmed and tested:
https://dev.openwrt.org/ticket/13201#comment:41
Thanks to oguretsagressive for testing.

Signed-off-by: Dmytro <dioptimizer@gmail.com>

SVN-Revision: 37878
2013-09-02 16:09:12 +00:00
Gabor Juhos 1f007eeca1 ar71xx: remove fs_* variables from image/Makefile
Those are not needed since we are generating the
initramfs images along with the others.

Remove the variables and use the template names
directly.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37876
2013-09-02 09:24:59 +00:00
Gabor Juhos e7a5947576 ar71xx: fix initramfs image generation for Cameo933x profiles
Initramfs images are not generated for profiles which
are using the squashfs-only template. Add the missing
'Image/Build/Template/squashfs-only/initramfs' to fix
that.

Also, 'Image/Build/Cameo933x/initramfs' uses wrong
parameters for 'MkuImageLzma/initramfs' due to a
misplaced commma. Remove that to fix the generated
initramfs images.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37871
2013-09-02 07:42:03 +00:00
Gabor Juhos 968ed2e58a x86/alix2: remove kernel config for 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37870
2013-09-02 07:36:46 +00:00
Gabor Juhos 5aa70d283f x86/alix2: switch to 3.10.9
Taken from the 'alix2: update to LINUX_VERSION 3.10.9'
patch: http://patchwork.openwrt.org/patch/3971/.

Russell says in the original patch:

"Initial whack at updating alix2 to a current kernel. It builds
and runs without problems so far. I copied target/linux/config-3.8,
target/linux/x86/alix2/config-3.8, and target/linux/patches-3.8 to
their 3.10 equivalents and tweaked until it built.  The patches
required no changes."

Signed-off-by: Russell Senior <russell@personaltelco.net>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37869
2013-09-02 07:36:45 +00:00
Gabor Juhos 562e76d22c x86/alix2: add kernel config for 3.10
Taken from the 'alix2: update to LINUX_VERSION 3.10.9'
patch: http://patchwork.openwrt.org/patch/3971/.

Russell says in the original patch:

"Initial whack at updating alix2 to a current kernel. It builds
and runs without problems so far. I copied target/linux/config-3.8,
target/linux/x86/alix2/config-3.8, and target/linux/patches-3.8 to
their 3.10 equivalents and tweaked until it built.  The patches
required no changes."

The current patch contains additional configuration tweaks.

Signed-off-by: Russell Senior <russell@personaltelco.net>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37868
2013-09-02 07:36:44 +00:00
Gabor Juhos 11b1887c53 x86: add support for 3.10
Add kernel configuration and patches for Linux 3.10.

Taken from the 'alix2: update to LINUX_VERSION 3.10.9'
patch: http://patchwork.openwrt.org/patch/3971/.

Russell says in the original patch:

"Initial whack at updating alix2 to a current kernel. It builds
and runs without problems so far. I copied target/linux/config-3.8,
target/linux/x86/alix2/config-3.8, and target/linux/patches-3.8 to
their 3.10 equivalents and tweaked until it built.  The patches
required no changes."

The current patch contains additional configuration tweaks,
and the kernel patches were refreshed.

Signed-off-by: Russell Senior <russell@personaltelco.net>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37867
2013-09-02 07:36:40 +00:00
Luka Perkov 18a767156e imx6: add uboot-envtools to default packages
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37859
2013-08-29 23:06:32 +00:00
Florian Fainelli 1e1becb174 mvebu: remove maintainer ship role
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 37855
2013-08-28 16:19:59 +00:00
Felix Fietkau 999ec62da7 kernel: fix booting issues on imx23 and imx6 targets
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37854
2013-08-28 07:38:36 +00:00
Luka Perkov ae660e85d3 imx6: disable sdma until license issues are solved
Also, synchronize patches with upstream.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37853
2013-08-28 00:07:43 +00:00
Luka Perkov ec52778a14 imx6: refresh 3.10 kernel config
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37850
2013-08-28 00:07:37 +00:00
Gabor Juhos dd421c00a2 ar71xx: add some pending patches
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37849
2013-08-27 18:06:49 +00:00
Gabor Juhos a4c2853261 kernel: don't hide the 'Warning: unable to open an initial console' message
The 'Warning: unable to open an initial console' message
indicates an error in the rootfs. Remove the patch which
hides the warning.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37848
2013-08-27 12:03:01 +00:00
Gabor Juhos 012f214e6f kernel: ensure that /dev/console exists in initramfs
Linux expects that the /dev/console node is present
in the rootfs image. Create the node in initramfs,
in order to make std{in,out,err} usable even in early
init process.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37846
2013-08-27 12:02:54 +00:00
Gabor Juhos d6b4b8f612 ar71xx: don't hardwire cpu_has_dsp{,2} to zero
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37845
2013-08-27 10:48:25 +00:00
Gabor Juhos 9af6a5a88f ar71xx: don't register USB device on WNDAP360
Apparently registering usb device on newest trunk causes
this AP not to boot...
Since there is no USB socket in that device anyway this
can be simply removed (and device boots then no problem).

[juhosg:
  - tweak subject line and description,
  - remove #include "dev-usb.h",
  - remove 'select ATH79_DEV_USB' from Kconfig]

Signed-off-by: Jacek Kikiewicz <jaceq@aol.pl>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37844
2013-08-27 10:48:24 +00:00
Felix Fietkau c75416292a kernel: fixing a potential deadlock in block2mtd for kernel 3.6/3.8/3.9
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 37842
2013-08-26 17:47:14 +00:00
Gabor Juhos 77e00faa33 x86/alix2: add kmod-usb2-pci to default packages
The USB controller is sitting on the PCI bus and
without the package the EHCI controller is not
usable.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37835
2013-08-25 14:42:34 +00:00
Gabor Juhos 42914b0b0e ar71xx: build factory image for DIR-505 A1
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37834
2013-08-24 10:11:53 +00:00
Gabor Juhos f7eb3d94b9 ar71xx: allow to override kernel size in the CameoHornet profile
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37833
2013-08-24 10:11:45 +00:00
Gabor Juhos 043edd8074 kernel: update 3.10 to 3.10.9
Also refresh 3.10 patches.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37832
2013-08-23 17:31:04 +00:00
Gabor Juhos 6f232cba62 generic: refresh kernel configs with kconfig.pl
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37831
2013-08-23 17:31:02 +00:00
Gabor Juhos a76371970e ramips: remove lantiq specific patches
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37830
2013-08-23 17:07:28 +00:00
Gabor Juhos 9330662208 ramips: use correct image size parameter for DIR-610 A1
Fixes the following error:

  bash: line 0: [: ralink_default_fw_size_4M: integer expression expected

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37829
2013-08-23 17:07:27 +00:00
Gabor Juhos 0ebe286761 ramips: use correct parameters in the Seama template
Fixes DIR-645 image generation errors:

  bash: line 0: [: wrgn39_dlob.hans_dir645: integer expression expected
  ...
  bash: wrgn39_dlob.hans_dir645 - 64: syntax error: invalid arithmetic operator (error token is ".hans_dir645 - 64")  make[4]: *** [install] Error 1

Signed-off-by: Michael Lee <igvtee@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37828
2013-08-23 17:07:26 +00:00
Gabor Juhos 3afc3824ca ramips: update the RT3883 PCI patch
Fix the following warning:

  arch/mips/pci/pci-rt3883.c: In function 'rt3883_pci_probe':
  arch/mips/pci/pci-rt3883.c:458:4: warning: use of 'h' length modifier with 'a' type character [-Wformat]

Signed-off-by: Michael Lee <igvtee@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37827
2013-08-23 17:07:25 +00:00
Gabor Juhos 2d89ba8210 kernel/3.10: backport of_pci_get_devfn function from 3.11
Fixes the following build error on ramips/rt3883:

  arch/mips/pci/pci-rt3883.c:488:3: error: implicit declaration of function \
  'of_pci_get_devfn' [-Werror=implicit-function-declaration]
  cc1: some warnings being treated as errors

Although the function is only used by the PCI driver
of the RT3883 SoC but at the moment but it might be
useful for other targets as well.

Signed-off-by: Michael Lee <igvtee@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37826
2013-08-23 17:07:20 +00:00
Zoltan Herpai 887ddc4192 imx23: bump kernel to 3.10.9
SVN-Revision: 37824
2013-08-22 19:30:46 +00:00
Zoltan Herpai 330c236833 imx23: add support for u-boot image build
SVN-Revision: 37823
2013-08-22 19:29:07 +00:00
Felix Fietkau 3848e6a246 kernel: crashlog: Avoid out-of-bounds write
vsnprintf returns the number of chars that would have been written, not
the actual number of chars written. This can lead to crashlog_buf->len
being too big which in turn can lead to get_maxlen() returning negative
numbers. The length argument of kmsg_dump_get_buffer will be casted to
a size_t which makes a negative input a big positive number allowing
kmsg_dump_get_buffer to write out of bounds.

Fix this by using vscnprintf which returns the actually written number
of chars.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>

SVN-Revision: 37820
2013-08-21 20:59:25 +00:00
Luka Perkov 3e28d0849e malta: refresh configuration
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37819
2013-08-21 00:36:53 +00:00
Felix Fietkau e2aa807b60 kernel: add back missing declaration in the MIPS DMA patch that broke octeon
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37811
2013-08-18 05:49:57 +00:00
Luka Perkov 4f679c1775 kernel: drop dead pwm code
The files have last been used with 2.6.x kernel.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37810
2013-08-18 01:25:41 +00:00
Luka Perkov a2dccb958c kernel: drop dead glamo code
The code is not used since the s3c24xx target was removed.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37809
2013-08-18 01:25:40 +00:00
Luka Perkov f1509b1958 kernel: replace local m25p80 patches with upstream submission
http://lists.infradead.org/pipermail/linux-mtd/2013-August/048154.html
http://patchwork.ozlabs.org/patch/268019/

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37808
2013-08-17 23:54:41 +00:00
Luka Perkov 18a36d3062 kernel: drop 010-mtd_mp25p80_add_gd25q32_gd25q64.patch
The patch in question has been accepted upstream in commit:

55bf75b7dd8ec875d048824f3cdecf8254e292e5

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37807
2013-08-17 22:29:05 +00:00
Luka Perkov 5c018d5096 kernel: drop 110-fix_mtd_include.patch
Kernel builds just fine without this patch so we can just remove it.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37805
2013-08-17 17:09:41 +00:00
Hauke Mehrtens af161b6576 brcm47xx: fix typo in Broadcom-bgmac-b43 profile name
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37803
2013-08-17 13:41:22 +00:00
Felix Fietkau d16060d5a3 kernel: fix a small #ifdef bug in the noncoherent dma check rework
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37791
2013-08-15 09:29:53 +00:00
Felix Fietkau e27f67b30a kernel: improve dma ops inlining patches
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37790
2013-08-15 09:23:07 +00:00
Luka Perkov 5064c81457 ar71xx: add support for hornet-ub-x2
The hornet-ub-x2 is hornet-ub variant with double more flash and ram.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37788
2013-08-15 00:57:47 +00:00
John Crispin dc7164d4ef ramips: DIR-610-A1 Support
http://patchwork.openwrt.org/patch/3933/

Signed-off-by: Flavio Silveira <fggs@terra.com.br>

SVN-Revision: 37785
2013-08-14 19:35:27 +00:00
John Crispin 97a7daa72f ramips: fix typo in network uci_defaults script
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37784
2013-08-14 19:08:55 +00:00
John Crispin 41f62983d3 ramips: dts file cleanup
cleanup some inconsistencies in the dts files

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37783
2013-08-14 19:08:44 +00:00
John Crispin eb7669fc5d ar71xx: fix TL-WR710N board detection
Fix for recognize TL-WR710N

http://patchwork.openwrt.org/patch/3946/

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 37782
2013-08-14 18:15:58 +00:00
John Crispin 6d7d09a126 ar71xx: Fix factory image for DIR 505 A1
Based on the original firmware, the file must have the tag
HORNET-PACKET-DIR505A1-3, not HORNET-RT-DIR505A1-3.

http://patchwork.openwrt.org/patch/3945/

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 37781
2013-08-14 18:15:49 +00:00
John Crispin 36e3424fa5 ramips: add support for dir810l and asus rp-n53
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37780
2013-08-14 18:15:35 +00:00
John Crispin 632a3e3a79 ramips: various updates to the mt7620 dtsi file
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37779
2013-08-14 18:15:26 +00:00
John Crispin 9e5b0cc19c ramips: update v3.10 patches
Sync the patches with those sent upstream for v3.12.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37778
2013-08-14 18:15:15 +00:00
Felix Fietkau 8b8875b305 ocf: switch MODULE_LICENSE from BSD to "Dual BSD/GPL" to make the kernel recognize modules as GPL-compatible
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37769
2013-08-14 08:52:19 +00:00
Felix Fietkau bbd4d4c8b8 ar71xx: ethernet: reduce tx dma ring size further to improve cache footprint
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37765
2013-08-13 10:35:10 +00:00
Felix Fietkau 3ead1e058c kernel: add patch to inline mips dma mapping functions - reduces code size and improves performance
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37763
2013-08-12 17:26:08 +00:00
Felix Fietkau 58e049ea80 ar71xx: ethernet: reduce tx and rx DMA ring size to improve cache footprint
256 entries is a bit excessive, even for gigabit speeds

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37762
2013-08-12 17:26:03 +00:00
Felix Fietkau f43b4ea962 ar71xx: ethernet: cache skb->len in the tx function to avoid accessing it again in completion
Improves ethernet performance, especially during bridging

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37761
2013-08-12 17:26:00 +00:00
Felix Fietkau e5fd991c6c rtl8367: add support for configuring the VLAN FID
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37760
2013-08-12 17:25:25 +00:00
Felix Fietkau 53c3b2a193 ar71xx: fix typo
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37759
2013-08-12 12:41:53 +00:00
Felix Fietkau f18fd5512e ar71xx: ethernet: skip calls to netdev_completed_queue and netif_wake_queue if no tx cleanup was done
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37758
2013-08-12 11:44:35 +00:00
Felix Fietkau 81cfb9e5ed ar71xx: ethernet: do not update the unused dev->last_rx field
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37757
2013-08-12 11:44:31 +00:00
Felix Fietkau 104ff48e25 ar71xx: add missing return statement in ethernet mtu change op
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37756
2013-08-12 11:44:28 +00:00
Luka Perkov acb9bc0f5e kernel: remove imx-sdma-fw because of license issues
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37755
2013-08-12 10:48:05 +00:00
Luka Perkov 3258334e79 imx6: use kmod-imx-sdma-fw-imx6 by default
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37754
2013-08-11 15:10:44 +00:00
Luka Perkov 5337af031e imx6: fix sdma
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37752
2013-08-11 15:10:38 +00:00
Felix Fietkau 09f4018b2e x86: Fix CONFIG_X86_GRUB_SERIAL=""
With

    .config:CONFIG_X86_GRUB_SERIAL=""

which (AFAICT) is the way to tell GRUB not to use a serial console, in

    target/linux/x86/image/Makefile:ifneq ($(CONFIG_X86_GRUB_SERIAL),)

$(CONFIG_X86_GRUB_SERIAL) expands to `""' (a literal double double-quote),
making the condition unconditionally false.

This patch fixes the situation by passing CONFIG_X86_GRUB_SERIAL through
qstrip before testing.

Signed-off-by: Tamas TEVESZ <ice@extreme.hu>

SVN-Revision: 37749
2013-08-10 18:35:29 +00:00
Felix Fietkau 7b05fe59a4 ar71xx: allow mtu > 1500 based on the configured tx/rx mtu register value
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37748
2013-08-10 15:31:38 +00:00
Florian Fainelli 007bd290ea mcs814x: enable POSIX file locking
opkg (and possible other tools) are currently broken as it requires
file locking support enabled in the kernel.
Without this results in a message like:

root@OpenWrt:/etc/config# opkg update
Collected errors:
 * opkg_conf_load: Could not lock /var/lock/opkg.lock: Permission denied.

With this patch opkg is fully functional on this platform.

Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 37745
2013-08-09 20:45:17 +00:00
John Crispin 94666dad1c lantiq: fix TD-W8970 image generation to work with the new tool
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37727
2013-08-06 16:25:45 +00:00
John Crispin f835cb6cc4 ar71xx: remove duplicate dir505 entry from board detection code
https://dev.openwrt.org/ticket/14006

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37723
2013-08-06 14:12:02 +00:00
John Crispin d13cbb04ad lantiq: add support for tplink images to .../image/Makefile
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37722
2013-08-06 12:31:25 +00:00
John Crispin 5001afdc37 lantiq: make the split patch recognize the tplink header
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37721
2013-08-06 12:31:20 +00:00
John Crispin 7f2eaac407 lantiq: fix TDW8970.dts commandline and partition name
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37720
2013-08-06 12:31:16 +00:00
John Crispin e993e0c2cf lantiq: add tplink header id to sysupgrade and fix a comment
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37719
2013-08-06 12:31:10 +00:00
Luka Perkov 27fa640548 lantiq: add (incomplete) support for Aztech GR7000
*) can not connect to switch chip
*) only one usb port is working
*) wifi is not working

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37712
2013-08-06 10:17:16 +00:00
Florian Fainelli d1914b4939 kernel: add some missing config symbols
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 37710
2013-08-05 20:58:05 +00:00
Hauke Mehrtens 9d4145efe5 kernel: fix DMA error when BCM4331 is connected to BCM4706
The BCM4331 supports a PCIe max request size of 512 bytes and uses
that, but the PCIe controller in the BCM4706 just supports 128 Bytes
and that causes a DMA error for packages bigger than 126 bytes. This
fixes the problem by setting the BCM4331 also to 128 Bytes.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37709
2013-08-05 16:17:05 +00:00
Gabor Juhos 9257d556c2 ramips: re-implement PCI mux
Parallel flash access on RT3662/RT3883 based devices
is broken without that. It was fixed already some time
ago, but that change seems lost somewhere.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37708
2013-08-05 12:49:19 +00:00
Gabor Juhos c80dd34924 ramips: allow to build Seama firmware images with arbitrary size
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37707
2013-08-05 12:35:22 +00:00
John Crispin 267810f73a ar71xx: add usb modules to dir 505 profile
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37706
2013-08-05 11:08:30 +00:00
John Crispin c83e665a2c octeon: add a few missing symbols to the kernel config file
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37705
2013-08-05 10:42:09 +00:00
John Crispin 288adb6634 lantiq: several a803 related fixes
based on work from Matti Laasko that he posted in the wiki

Signed-off-by: John Crispin <blogic@openwrt.or

SVN-Revision: 37704
2013-08-05 10:42:00 +00:00
John Crispin 553a469728 ar71xx: add support for dir 505 a1
this patch is based on ...

-> https://forum.openwrt.org/viewtopic.php?pid=179902#p179902

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37703
2013-08-05 10:41:48 +00:00
Gabor Juhos 99a12119ca ar71xx: fix tl-wa901nd buttons code
This patch fixes the code of the buttons for TP-Link WA901ND.

Signed-off-by: Rocco Folino <lordzen@autistici.org>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37696
2013-08-05 09:09:39 +00:00
Gabor Juhos ccec78beaa ar71xx: ubnt unifi outdoor register gpio button
This patch register the gpio buttons for the Ubiquiti UniFi Outdoor.

Signed-off-by: Rocco Folino <lordzen@autistici.org>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37695
2013-08-05 09:09:37 +00:00
John Crispin f0b5e7d419 x86: change /dev/console to tty to fix job control
Job control is turned off because it cannot obtain controlling terminal on
/dev/console, so it is impossible to do any job control operation behind
real x86 device (keyboard+monitor or virtualized).

This patch switches /dev/console to tty devices for ash on x86 generic target.

Signed-off-by: Jiri Slachta <slachta@cesnet.cz>

SVN-Revision: 37693
2013-08-04 17:05:33 +00:00
Luka Perkov f5b9555cdc imx6: sync usb chipidea with upstream
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37686
2013-08-04 14:20:15 +00:00
John Crispin db083a41cf generic: make the module reloc pacth work on mips64
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37685
2013-08-04 13:54:42 +00:00
John Crispin 3a2040ffee octeon: add support for the octeon mips64 SoC
This is the SoC used be the ESR Lite made by ubnt.com

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37684
2013-08-04 13:54:32 +00:00
Luka Perkov 8a4726bca8 imx6: remove sdma binary
SVN-Revision: 37682
2013-08-04 13:28:26 +00:00
Hauke Mehrtens 2fcaba306e brcm47xx: change board detection for some Asus devices
This closes #13316

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37680
2013-08-04 12:36:13 +00:00
Hauke Mehrtens cccc9e214b kernel: do not build FW_LOADER as a module.
CONFIG_FW_LOADER=y is set in the generic config and our packages in
packages/kernel/linux are depending on it to be compiled into the
kernel.
This fixes some dependency problem where kmod-r8169 misses
firmware_class.ko.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37672
2013-08-04 09:41:10 +00:00
Zoltan Herpai 36cc8cc856 imx23: add missing DTS config for lradc
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 37663
2013-08-03 10:37:25 +00:00
Zoltan Herpai 370ad94576 imx23: add hw crypto (dcp) support
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 37662
2013-08-03 10:35:18 +00:00
Hauke Mehrtens b2d2ca4bbd kernel: add missing config options
SVN-Revision: 37660
2013-08-02 20:13:54 +00:00
Hauke Mehrtens 219eac1856 kernel: add missing config option
SVN-Revision: 37657
2013-08-02 16:51:47 +00:00
Hauke Mehrtens c47a55dd0d kernel: add missing config option
brcm47xx does not use CONFIG_B53_SPI_DRIVER, but it could be selected if spi is build as a module

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37656
2013-08-02 16:16:23 +00:00
Jonas Gorski 3e9ad14992 kernel: ocf: add missing kernel dependencies
OCF_CRYPTOSOFT uses both symbols form crypto_hash and crypto_blkcipher,
so let it select these through kernel config.

Fixes the following build error:

ERROR: "crypto_alloc_ahash" [crypto/ocf/cryptosoft.ko] undefined!
ERROR: "crypto_ahash_digest" [crypto/ocf/cryptosoft.ko] undefined!
ERROR: "crypto_ahash_setkey" [crypto/ocf/cryptosoft.ko] undefined!
make[6]: *** [__modpost] Error 1
make[5]: *** [modules] Error 2

Reported-by: Russell Senior <russell@personaltelco.net>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 37652
2013-08-01 23:04:42 +00:00
Hauke Mehrtens 290dade033 brcm47xx: switch to kernel 3.10.4
This uses a new switch driver.
The old ADMTEK Adm6996 switch is not supported any more.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37650
2013-08-01 21:01:59 +00:00
Hauke Mehrtens 7e14fd55fd brcm47xx: use lib phy when tg3 is in use
This is untested, but probably needed to make it work with the phy lib switch driver.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37649
2013-08-01 20:47:55 +00:00
Hauke Mehrtens 8966b86067 kernel: b53: use devm_gpio_request_one() to request gpio
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37648
2013-08-01 20:46:56 +00:00
Hauke Mehrtens 2b55968f5d brcm47xx: improve detection of Linksys WRTSL54GS
This closes #13319

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37647
2013-08-01 19:33:59 +00:00
Hauke Mehrtens 6d7f796b52 brcm47xx: remove support for kernel 3.9
This is not needed any more.

SVN-Revision: 37646
2013-08-01 19:17:51 +00:00
Hauke Mehrtens e1127aca07 kernel: b53: add support for GPIO reset
This is needed for some switches used on bcm47xx SoCs like the one on the Asus RT-N66U.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37645
2013-08-01 19:05:34 +00:00
Hauke Mehrtens 2363cb3893 brcm47xx: add function to get a gpio pin by name
bcm47xx_nvram_gpio_pin() returns a gpio pin number for a given name based
on configuration data in nvram.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37644
2013-08-01 19:04:12 +00:00
John Crispin 169e184521 ramips: add Poray IP2202 support
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>

SVN-Revision: 37640
2013-08-01 14:31:15 +00:00
John Crispin ce4228b417 ramips: add Poray X8 support
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>

SVN-Revision: 37639
2013-08-01 14:31:09 +00:00
John Crispin 54968110f1 ramips: add Poray X5/X6 Support
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>

SVN-Revision: 37638
2013-08-01 14:31:04 +00:00
John Crispin 0dc3b44b0d ramips: add Poray M4 4M/8M support
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>

SVN-Revision: 37637
2013-08-01 14:30:58 +00:00
John Crispin 23d3b705df ramips: add Poray M3 support
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>

SVN-Revision: 37636
2013-08-01 14:30:53 +00:00
John Crispin aaedf6c8c6 ramips: add basics for Poray devices
This commit adds the basic elements to support Poray brand routers.
It contains a tool to do the encryption/obfuscation that is used in
Poray routers.

Support for Poray devices was worked on by:

Felix Kaechele <heffer@fedoraproject.org>
Luis Soltero <lsoltero@globalmarinenet.com>
Michel Stempin <michel.stempin@wanadoo.fr>

Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>

SVN-Revision: 37635
2013-08-01 14:30:46 +00:00
John Crispin b4c722267e lantiq: fix VG3503J ethernet/gphy led support
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37634
2013-08-01 14:30:40 +00:00
John Crispin 046b282429 ralink: add mt7620a_mt7610e profile
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37633
2013-08-01 14:30:33 +00:00
Zoltan Herpai 9eb3572b7b imx23: add lradc support
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 37632
2013-08-01 09:36:37 +00:00
Zoltan Herpai 91e8082e2d kernel: add missing iio config symbols for 3.10
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 37631
2013-08-01 06:58:08 +00:00
Hauke Mehrtens e2b2e3886b brcm47xx: run mtd fixtrx linux every time
With this patch it is possible to boot a device with kernel 3.10 a second time.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37625
2013-07-31 17:41:52 +00:00
Zoltan Herpai 0a6e0228d9 imx23: add SoC sound support
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 37622
2013-07-31 09:52:46 +00:00
Felix Fietkau 28d03a9983 kernel: update remaning platforms accidentally left out of r37617
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37619
2013-07-30 08:00:25 +00:00
Felix Fietkau 8f04792531 kernel: update to linux 3.10.4, refresh patches
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37617
2013-07-29 22:42:22 +00:00
John Crispin 336c94c32d lantiq: setup gphy leds on TPlink TDW8970
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37612
2013-07-29 13:10:42 +00:00
John Crispin c3b5ee96b9 lantiq: add gphy pinmux definitions
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37611
2013-07-29 13:10:37 +00:00
John Crispin 61e6be686f lantiq: set sane default for phy leds
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37610
2013-07-29 13:10:32 +00:00
John Crispin c2600d13d1 ramips: fix indenting of spi partitions inside dts files
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37609
2013-07-29 13:10:26 +00:00
Felix Fietkau 99e3616dac kernel: add missing config symbols for 3.10
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37602
2013-07-29 12:48:57 +00:00
Felix Fietkau 73c4d73d6d build: unify target independent optimization options
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37600
2013-07-29 09:38:29 +00:00
Felix Fietkau cc26f768e4 kernel: stop patching -funit-at-a-time into CFLAGS, it has no effect on recent compilers
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37598
2013-07-29 09:38:21 +00:00
Hauke Mehrtens ad59c4e646 bcm53xx: compile b53 switch driver
SVN-Revision: 37587
2013-07-28 22:14:55 +00:00
Hauke Mehrtens 1377916ea7 bcm53xx: update patches
This reorders the patchs and adds some new ones.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37586
2013-07-28 22:13:52 +00:00
Hauke Mehrtens 333252e493 bcm53xx: use clocksource patch as it was committed upstream
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37585
2013-07-28 21:22:50 +00:00
Hauke Mehrtens 3e8c39f239 bcm53xx: add initial bgmac patches
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37584
2013-07-28 21:20:15 +00:00
Hauke Mehrtens 24628e4ce7 bcm53xx: activate pci and usb in kernel config
This is not working, just compiling

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37583
2013-07-28 21:10:42 +00:00
Luka Perkov d6a23e1ae9 imx6: update default packages
SVN-Revision: 37582
2013-07-28 20:34:21 +00:00
Luka Perkov a08eab3ce8 imx6: add support for EHCI USB
SVN-Revision: 37581
2013-07-28 20:34:19 +00:00
Gabor Juhos 65584ed54f ar71xx: add profile and build image for the WNR612 v2 board
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3876/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37577
2013-07-28 10:23:38 +00:00
Gabor Juhos 41d136f2c8 ar71xx: add user-space support for the WNR612 v2 board
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3876/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37576
2013-07-28 10:23:37 +00:00
Gabor Juhos 6d8163505e ar71xx: add kernel support for the Netgear WNR612 v2 board
Netgear WNR612 v2:
 - cpu Atheros AR7240 (Python) @400MHz
 - flash 4MB
 - ram 32MB
 - ethernet 10/100: 1xwan + 2xlan (only two)
 - radio AR9285

[juhosg: use a separate kernel patch]

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3876/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37575
2013-07-28 10:23:36 +00:00
Gabor Juhos ede1587ed8 ar71xx: add profile and build image for the TL-WR710N board
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3873/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37574
2013-07-28 10:23:34 +00:00
Gabor Juhos 5f5257e234 ar71xx: add user-space support for the TL-WR710N board
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3873/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37573
2013-07-28 10:23:33 +00:00
Gabor Juhos c5029c2ebf ar71xx: add kernel support for the TP-LINK TL-WR710N v1 board
Small router sold in EU: AR9330@400MHz, 1x USB2.0,
2x ethernet, 8MB flash, 32MB ram, one led, one button.

See: http://galeria.tech-blog.pl/TP-Link_TL-WR710N-EU/

[juhosg: use a separate kernel patch]

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3873/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37572
2013-07-28 10:23:32 +00:00
Gabor Juhos af1dd57a37 ar71xx: build image for the MERCURY MW4530R board
Mercury MW4530R is a TP-Link TL-WDR4310 clone but
with a much lower price tag (~ $40). This patch
is tested to work at trunk r37525.

Signed-off-by: Leon Xu <ylxu72@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3856/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37571
2013-07-28 10:23:31 +00:00
Gabor Juhos 8b6f392b72 ar71xx: add model detection for the MERCURY MW4530R board
Mercury MW4530R is a TP-Link TL-WDR4310 clone but
with a much lower price tag (~ $40). This patch
is tested to work at trunk r37525.

Signed-off-by: Leon Xu <ylxu72@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3856/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37570
2013-07-28 10:23:29 +00:00
Gabor Juhos b49dc036e8 ar71xx: TEW632BRP has buttons 'active low', fix board config
Looks like trunk@37090 has changed the logic that determines
if router's button was pressed. This resulted in TEW632BRP
always booting into failsafe mode because it detected pressed
button (which was not pressed).

Measure with voltmeter has shown that buttons on this router
are actually active-low. This patch reflects this fact in
board configuration and fixes 'load info failsafe mode' issue.

Note: it looks like Trendnet TEW632BRP and a close relative
to TEW-652BRP V1.0 and D-Link DIR-615C1, so same problem may
exist on those routers as well. This patch doesn't affect
routers other than 632BRP and unfortunately I do not have
hardware to test this issue with other routers.

This patch fixes #13893 and is tested on actuall Trendnet
TEW632BRP.

Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37569
2013-07-28 10:23:22 +00:00
John Crispin 8dd30fa775 ramips: add MPR-A1 support
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37568
2013-07-27 09:23:52 +00:00
John Crispin 13b7ab81cf ralink: gpio driver should not set gpio to input when irq is querired
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37567
2013-07-27 09:23:45 +00:00
John Crispin eb089abd28 ramips: add back dwc_otg driver
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37566
2013-07-27 09:23:40 +00:00
John Crispin 718b47f0b4 ramips: MPR-A2 should use memory auto detection
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37565
2013-07-27 09:23:34 +00:00
John Crispin 115c6f85cf ramips: enable usb phy support on rt5350
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37564
2013-07-27 09:23:29 +00:00
John Crispin f4c4ca0b00 ralink: switch back to dwc_otg ... dwc2 seems to not work well with 3G modems
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37563
2013-07-27 09:23:24 +00:00
John Crispin 4176b6fdd3 strict_strtoul is obsolete, use kstrtoul instead
based on http://patchwork.openwrt.org/patch/3827/

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37562
2013-07-27 09:23:18 +00:00
John Crispin c4413b6e08 ramips: unbreak asiarf dts files
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37561
2013-07-26 15:19:19 +00:00
Gabor Juhos f093cda481 ar71xx: add profile and fixup image generation for the TL-MR10U board
Create a separate board profile and update the profile
name in image/makefile. Also use the correct machtype
string in kernel command line.

Based on andelf's patch:
http://andelf.diandian.com/post/2013-05-22/40050677370

Signed-off-by: Oleg Titov <oleg.titov@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3840/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37550
2013-07-26 07:32:01 +00:00
Gabor Juhos f4d5ecdb9f ar71xx: add user-space support for the TL-MR10U board
Based on andelf's patch:
http://andelf.diandian.com/post/2013-05-22/40050677370

Signed-off-by: Oleg Titov <oleg.titov@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3840/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37548
2013-07-26 07:31:59 +00:00
Gabor Juhos ec7fe3fab7 ar71xx: add kernel support for the TL-MR10U board
Based on andelf's patch:
http://andelf.diandian.com/post/2013-05-22/40050677370

[juhosg: extend WR703N code to handle the TL-MR10U
instead of adding a separate mach-tl-mr10u file]]

Signed-off-by: Oleg Titov <oleg.titov@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3840/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37547
2013-07-26 07:31:57 +00:00
Gabor Juhos e9688455f6 kernel: update 3.10 to 3.10.3
Also refresh 3.10 patches.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37546
2013-07-26 07:19:58 +00:00
John Crispin bfe65eaf7a lantiq: remove stale phy register setup properties from dts files
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37544
2013-07-25 20:54:51 +00:00
John Crispin 54b4074074 lantiq: add TP-Link TDW8970 image generation
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37543
2013-07-25 20:29:24 +00:00
John Crispin a2c5540727 lantiq: add profile for TP-Link TDW8970
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37542
2013-07-25 20:29:20 +00:00
John Crispin a99042c6a4 lantiq: add devicetree for TP-Link TDW8970
Signed-of-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37541
2013-07-25 20:29:15 +00:00
John Crispin 313636c1e4 lantiq: fix initramfs image generation for lzmaloader based images
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37540
2013-07-25 20:29:10 +00:00
John Crispin a4d31c0353 lantiq: make macs loadable from mtd partitions
This is a really ugly hack but it will have to do until we copy the ramips patches to the lantiq tree

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37539
2013-07-25 20:29:05 +00:00
John Crispin 32f7ae4ce6 lantiq: add a hook to make leds work on the secondary usb bus
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37538
2013-07-25 20:29:01 +00:00
John Crispin 4036be4408 lantiq: update pcie driver
This is an intermediate commit until the new OF driver is functional.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37537
2013-07-25 20:28:56 +00:00
Lars-Peter Clausen dee22d069f xburst: Add missing kernel config symbol
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>

SVN-Revision: 37534
2013-07-25 18:39:34 +00:00
John Crispin 04aaf7a03e ramips: disable hg255d
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37532
2013-07-25 17:03:08 +00:00
John Crispin 7feebeb193 ramipe: disable HG255D support
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37531
2013-07-25 16:55:48 +00:00
John Crispin 9b2c7be0c4 ramips: important patch for HG255D
r37505 add support for Huawei HG255D, but it only tested under a community hacked u-boot ("lintel u-boot"), which has a different mtd layout compared to origin one. If you install it on a box with origin u-boot, the origin factory part will be destroyed, and your wifi interface will never up!!!

This patch shrink firmware part in mtd layout to exclude origin factory part, and  I will prepare another patch to fix the eeprom extract issue for box with origin u-boot.

Signed-off-by: Leon Xu <ylxu72@gmail.com>

SVN-Revision: 37530
2013-07-25 16:01:58 +00:00
John Crispin 3ad136d9e3 ramips: Basic support for the AsiaRF RT5350 based AWM002 module and evaluation board.
Basic support for the AsiaRF RT5350 based AWM002 module and evaluation board.
http://www.asiarf.com/Smallest-Tiny-Ralink-802-11n-Wireless-AP-Router-Module-Board-AWM002-product-view-375.html

Signed-off-by Jon Smirl <jonsmirl@gmail.com>

SVN-Revision: 37521
2013-07-24 08:54:41 +00:00
John Crispin 3f3cac6136 ramips: fix HG255D VLAN initial detect issue
Signed-off-by: Leon Xu <ylxu72@gmail.com>

SVN-Revision: 37517
2013-07-23 13:07:00 +00:00
John Crispin 9181c569c4 linux/atheros: add 3.10 kernel support
SVN-Revision: 37513
2013-07-22 19:10:59 +00:00
Lars-Peter Clausen db32da6b16 xburst: Unmark broken
3.10 support is working fine for this platform, so unmark it broken.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>

SVN-Revision: 37512
2013-07-22 18:44:05 +00:00
Lars-Peter Clausen 44745f714e xburst: Remove 3.8 support
3.8 support for this platform is broken, so remove it.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>

SVN-Revision: 37511
2013-07-22 18:42:36 +00:00
Lars-Peter Clausen 32a83db347 xburst: Add 3.10 support
Missing files from the previous commit.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>

SVN-Revision: 37510
2013-07-22 18:41:23 +00:00
Lars-Peter Clausen e7d77883c7 xburst: Add 3.10 support
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>

SVN-Revision: 37509
2013-07-22 18:40:32 +00:00
Gabor Juhos ea55883a51 ar71xx: fix switch port map for the Archer C7
The correct port number for the WAN port is 1.
Update the VLAN port maps to reflect that.

https://forum.openwrt.org/viewtopic.php?pid=203755#p203755

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37507
2013-07-22 16:02:13 +00:00
Gabor Juhos bc91bec9f6 kernel/3.10: rework MIPS FPU emulation disable patch
Get rid of some ifdefs, and make sure that the microMIPS
specific code is disabled as well.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37506
2013-07-22 16:02:12 +00:00
John Crispin 0cc1e2acb4 ramips: Add support for Huawei HG255D in trunk
HG255D is a kind of popular low-end home gateway in China, this patch bring the the trunk support for it. It is adapted from a local Chinese community (www.right.com.cn), so credit should given to them.

This patch is tested to work except trivial LED issues.

Signed-off-by: Leon Xu <ylxu72@gmail.com>

SVN-Revision: 37505
2013-07-22 15:36:39 +00:00
Gabor Juhos ef944dcb85 kernel: update 3.10 to 3.10.2
Also refresh 3.10 patches.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37502
2013-07-22 15:31:13 +00:00
Gabor Juhos 6a5b4ec7dc kernel: update 3.9 to 3.9.11
Also refresh 3.9 patches.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37501
2013-07-22 15:30:56 +00:00
John Crispin 8d0cd50f30 ralink: set remove dwc_otg from default packages and use dwc2 instead
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37499
2013-07-22 13:52:52 +00:00
John Crispin ffe389c4c5 ralink: remove dwc_otg from modules.mk
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37498
2013-07-22 13:52:44 +00:00
John Crispin 5525b2136e ralink: set v3.10 as default
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37497
2013-07-22 13:52:32 +00:00
Felix Fietkau a50c18c632 kernel: fix crash in act_connmark in 3.9 and 3.10 (fixes #13916, #13876)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37493
2013-07-21 13:53:54 +00:00
Hauke Mehrtens a1ec175d7b kernel: add missing config option CONFIG_SND_MXS_SOC
This is needed by imx23 target.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37492
2013-07-21 12:27:22 +00:00
Lars-Peter Clausen 8fc44d1f5f kernel: Remove gpio-pwm patches
There is no platform using the gpio-pwm driver, yet these patches break the
generic PWM framework that is in upstream. So just remove them.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>

SVN-Revision: 37490
2013-07-21 11:43:16 +00:00
Felix Fietkau bb141e06a2 kernel: merge a proposed fix from LKML for fixing infinite data returned by /proc/timer_list
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37484
2013-07-20 18:35:54 +00:00
Jonas Gorski 7ef37c8e3e brcm63xx: add linux 3.10 support
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 37481
2013-07-20 11:30:26 +00:00
Gabor Juhos 205f7248ae Revert "ar71xx: override cpu_has_mmips feature"
This reverts r37477. A generic patch is used to fix
this globally, so revert the ar71xx specific change.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37480
2013-07-20 10:14:08 +00:00
Gabor Juhos a2d12049e0 kernel/3.10: add a generic patch for cpu_has_mmips override
Backport of commit 3ddc14add5e6341cf8ef4058c34c67ba7fd15317
from 3.11-rc1

Suggested-by: Jonas Gorski <jogo@openwrt.org>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37479
2013-07-20 10:14:05 +00:00
Gabor Juhos f5f9bce168 kernel/3.10: make emulate_load_store_microMIPS static
This allows the compiler to remove the emulate_load_store_microMIPS
function if cpu_has_mmips is defined as zero.

Backport of commit 74338805ec6869594d583535f941cb478c94dd73
from 3.11-rc1.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37478
2013-07-20 09:53:54 +00:00
Gabor Juhos 2d8fd8b58c ar71xx: override cpu_has_mmips feature
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37477
2013-07-20 09:40:32 +00:00
Gabor Juhos 8a6575cf53 ar71xx: use mtd_get_part_size helper
Drop the local get_mtd_part_size implementation and use
the equivalent function provided by lib/functions.sh.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37476
2013-07-20 09:26:57 +00:00
Gabor Juhos 7ee96847cf mpc85xx: remove 3.8 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37474
2013-07-20 09:13:04 +00:00
Gabor Juhos 294d7611c8 mpc85xx: switch to 3.10
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37473
2013-07-20 09:13:01 +00:00
Gabor Juhos 5803e27005 mpc85xx: add 3.10 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37472
2013-07-20 09:12:57 +00:00
Gabor Juhos 4a9d4271d0 ar71xx: build image for the TP-LINK TL-WR941N v6 board
TL-WR941N v6 use almost same IC as WDR3500.

[juhosg: change subject, and change fw layout from 4M to 4Mlzma]

Patchwork: http://patchwork.openwrt.org/patch/3719/
Signed-off-by: ShuYu Wang <andelf@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37471
2013-07-20 08:54:45 +00:00
Gabor Juhos 187a69c631 linux: move more ARM_ERRATA symbols to the generic config
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37470
2013-07-20 07:43:54 +00:00
Gabor Juhos a9de3a851a linux: remove 3.7 support
It is not used by any target.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37469
2013-07-20 07:37:27 +00:00
Gabor Juhos c8933c968f linux: remove duplicated 3.10 symbols from target config files
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37467
2013-07-20 07:21:52 +00:00
Jonas Gorski b1b4e7db13 kernel: move CONFIG_NET_IP_TUNNEL to generic
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 37465
2013-07-19 22:58:01 +00:00
Gabor Juhos 9e14f9df5f malta: remove CONFIG_NET_CLS* overrides
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37464
2013-07-19 22:51:37 +00:00
Gabor Juhos f4242a4324 malta: remove CONFIG_NET_SCH_* overrides
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37463
2013-07-19 22:51:36 +00:00
Gabor Juhos 2dee293d02 malta: remove CONFIG_*_PHY overrides
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37462
2013-07-19 22:51:35 +00:00
Gabor Juhos e47a2a24a7 malta: remove 3.8 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37457
2013-07-19 17:12:53 +00:00