7ab8489f82
config symbol cleanup
...
SVN-Revision: 25272
2011-02-01 13:18:26 +00:00
ae7209a6a4
add missing symbols
...
SVN-Revision: 25271
2011-02-01 12:44:16 +00:00
49057274ff
geos: preconfig fix
...
SVN-Revision: 25255
2011-01-30 21:07:39 +00:00
e9eee3c0b8
omap24xx: Move p54 eeprom init to preinit
...
SVN-Revision: 25242
2011-01-29 18:45:28 +00:00
2c26b69626
Add p54spi EEPROM initscript
...
SVN-Revision: 25241
2011-01-29 18:15:19 +00:00
001b9359de
n810 profile: Add calvaria
...
SVN-Revision: 25236
2011-01-29 12:39:14 +00:00
00994ee99e
n810bm: Implement more ADC basics
...
SVN-Revision: 25222
2011-01-28 22:45:37 +00:00
6c7916e975
n810: Install matchbox-keyboard
...
SVN-Revision: 25218
2011-01-28 19:38:20 +00:00
e1eeb8faae
n810: Use tint2 by default
...
SVN-Revision: 25214
2011-01-28 17:36:45 +00:00
fd0743debc
omap24xx: Workaround n810 FN key issue
...
SVN-Revision: 25212
2011-01-28 17:31:34 +00:00
ea0d6e6b1b
omap24xx: Don't automatically mount maemo fs
...
SVN-Revision: 25178
2011-01-27 22:15:43 +00:00
cc8228dbc6
fix firstboot with new MTD map driver
...
my-mkimage previously did not include the fs_mark of deadc0de because
upon formatting of jffs2 partition, U-Boot's CRC validation would not
allow the image to boot. This new MTD map will shrink the
kernel+rootfs+fs_mark image and recalculate the CRC, so that only the
kernel is part of the image validation. This also improves boot time,
since less is copied from FLASH->RAM. This is mostly from brcm47xx,
just with u-boot image vs TRX partitions.
Signed-off-by: Scott Nicholas <scott.nicholas@scottn.us>
SVN-Revision: 25176
2011-01-27 21:50:00 +00:00
a5adea5c2a
clean up mach-adm8668 includes
...
This patch cleans up the include directory, as they were from vendors
2.4 GPL source. Now only what's used is there.
Signed-off-by: Scott Nicholas <scott.nicholas@scottn.us>
SVN-Revision: 25175
2011-01-27 21:49:56 +00:00
6ec329be64
add default network/leds config ( #6759 )
...
Signed-off-by: Alexey Torkhov <atorkhov@gmail.com>
SVN-Revision: 25171
2011-01-27 21:49:42 +00:00
5cfbf3936e
zyxel: use acx-mac80211 driver by default
...
Signed-off-by: Alexey Torkhov <atorkhov@gmail.com>
SVN-Revision: 25170
2011-01-27 21:49:39 +00:00
d768cf790d
fix p-334wt build
...
Signed-off-by: Alexey Torkhov <atorkhov@gmail.com>
SVN-Revision: 25169
2011-01-27 21:49:31 +00:00
bd360a2266
omap24xx: Support ext4 as rootfs
...
SVN-Revision: 25166
2011-01-27 21:00:07 +00:00
e4f91c1ac7
move Netus G20 into a subtarget and rework toplevel config and makefile
...
SVN-Revision: 25165
2011-01-27 20:57:01 +00:00
c89c50614b
prepare TQMa9263 subtarget
...
SVN-Revision: 25164
2011-01-27 20:55:53 +00:00
05c829ecf2
add TQMa9263 board setup
...
SVN-Revision: 25163
2011-01-27 20:55:26 +00:00
1effec1690
prepare TQ-Components TQMa9263 kernel support
...
SVN-Revision: 25162
2011-01-27 20:54:54 +00:00
7c73284307
omap24xx: Fix serial console for .37
...
SVN-Revision: 25161
2011-01-27 20:30:28 +00:00
d381e20c87
omap24xx: Update to .37
...
SVN-Revision: 25160
2011-01-27 20:20:27 +00:00
a844918ead
we don't support gcc 4.1.x
...
SVN-Revision: 25147
2011-01-27 13:33:53 +00:00
444541f6f8
omap24xx: Refresh 2.6.37 patches
...
SVN-Revision: 25143
2011-01-27 13:19:03 +00:00
ee87d99006
fix LD name
...
SVN-Revision: 25140
2011-01-27 12:52:33 +00:00
0f325459ea
add preliminary LEON support
...
SVN-Revision: 25139
2011-01-27 12:51:25 +00:00
bed53c93d6
give some credits to Tanguy Bouzeloc in the spi driver
...
SVN-Revision: 25133
2011-01-27 02:11:08 +00:00
1c92e047c8
ramips: register watchdog device on the rt288x boards
...
SVN-Revision: 25130
2011-01-26 20:48:52 +00:00
2b50cecea6
ramips: add watchdog device for RT288x
...
SVN-Revision: 25129
2011-01-26 20:48:50 +00:00
764aa3fe9c
ramips: register watchdog device on the rt305x boards
...
SVN-Revision: 25128
2011-01-26 20:48:47 +00:00
42e36cf732
ramips: add watchdog device for RT305x
...
SVN-Revision: 25127
2011-01-26 20:48:46 +00:00
16366feafb
ramips: add watchdog driver
...
SVN-Revision: 25126
2011-01-26 20:48:41 +00:00
f38367fcb4
ramips: implement clock API for RT288x
...
SVN-Revision: 25125
2011-01-26 20:48:39 +00:00
b0ffa70248
ramips: implement clock API for RT305X
...
SVN-Revision: 25124
2011-01-26 20:48:35 +00:00
f9e74383a9
ramips: remove extern and __init from function prototypes
...
SVN-Revision: 25123
2011-01-26 20:48:33 +00:00
256169cbd0
ar71xx: add rtl8366s initvals for the DIR-825 board
...
SVN-Revision: 25121
2011-01-26 20:35:47 +00:00
4f1f672d9e
generic: rtl8366s: allow initial register values to be passed via platform_data
...
SVN-Revision: 25120
2011-01-26 20:35:46 +00:00
800fbf32d2
ar71xx: create firmware image for the WNDR3700v2 board
...
Patch-by: Mark Mentovai <mark@moxienet.com>
SVN-Revision: 25119
2011-01-26 20:35:44 +00:00
67c3e0bf7e
ar71xx: add support for the WNDR3700v2 board
...
Based on a patch by Mark Mentovai <mark@moxienet.com>
SVN-Revision: 25118
2011-01-26 20:35:42 +00:00
3ed2455105
Add kernel patch to expose omap3 die id via sysfs
...
SVN-Revision: 25112
2011-01-26 13:33:07 +00:00
5571acdbd0
x86/soekris: Add defconfig for soekris net4801 and net4826
...
Add default config file for net4801 and 4826 and initial script
to copy config file like it is done for other platforms.
Patch from: kentarou matsuyama <matsuyama@thinktube.com>
SVN-Revision: 25103
2011-01-26 11:33:46 +00:00
3d9d5cee8a
x86/soekris: Add script to detect soekris model
...
Add script to detect soekris board of net4801 and net4826.
Patch from: kentarou matsuyama <matsuyama@thinktube.com>
SVN-Revision: 25102
2011-01-26 11:33:42 +00:00
62e8fbd7ae
generic: remove en25pxx support patch, it is in mainline since 2.6.36
...
SVN-Revision: 25097
2011-01-25 10:24:27 +00:00
9bfd655af3
drop 2.6.32 support (next target is 2.6.38)
...
SVN-Revision: 25096
2011-01-25 08:57:37 +00:00
23c966a388
kernel: when bridging, do not forward EAP frames to other ports, only deliver them locally fixes WPA authentication issues with multiples APs that are connected to each other via bridges
...
SVN-Revision: 25095
2011-01-25 00:25:49 +00:00
18c4d8389e
add missing symbol for 2.6.38
...
SVN-Revision: 25091
2011-01-24 12:52:44 +00:00
c861e4815d
upgrade to 2.6.37
...
SVN-Revision: 25090
2011-01-24 12:51:48 +00:00
58470cfb0c
refresh patches
...
SVN-Revision: 25089
2011-01-24 12:36:18 +00:00
2262fa9f15
replace the mips_boot patch with one that makes BOOT_RAW selectable, and enable it in the generic config
...
SVN-Revision: 25088
2011-01-24 12:33:25 +00:00
979b095c40
this missing header patch is way too old for any sane software to depend on it
...
SVN-Revision: 25087
2011-01-24 12:18:02 +00:00
30b6d17ce3
remove mips gcc4 inline patch - fixed upstream
...
SVN-Revision: 25086
2011-01-24 12:16:57 +00:00
2821101c92
platform specific patches don't belong here - take #2
...
SVN-Revision: 25085
2011-01-24 12:11:25 +00:00
7c9d132d10
platform specific patches don't belong here
...
SVN-Revision: 25083
2011-01-24 11:01:38 +00:00
cf3d4be590
refresh 2.6.38 patches with -rc2
...
SVN-Revision: 25081
2011-01-24 09:39:17 +00:00
a15b4bf6fc
* adds arv4518pw mach support * fixes arv4525pw * make sure all mach names have the same style * move code around
...
SVN-Revision: 25075
2011-01-23 19:16:33 +00:00
a8819fd220
adds machtype for ARV7518PW
...
SVN-Revision: 25074
2011-01-23 12:51:15 +00:00
699f5c8729
remove deadcode from [25072]
...
SVN-Revision: 25073
2011-01-23 12:12:23 +00:00
7c9e1370e9
* fix pci support for more than 1 device * fixes ioport mappings * adds support for arcor easybox 803/arv752DWP22 * gpio direction was not set properly during a gpio_request() * usb compile warning
...
bugfix, cleanup,
SVN-Revision: 25072
2011-01-23 12:08:44 +00:00
275c33c6f8
* Make sure that Geos baud-rate defaults correctly Changeset 23414 somehow got reordered. The unconditional default trumps later settings.
...
contributed by Philip Prindeville
SVN-Revision: 25068
2011-01-22 23:10:51 +00:00
079ba5ac14
* adds sane default uci environment * adds sane default package selection
...
contributed by Philip Prindeville
SVN-Revision: 25065
2011-01-22 22:43:51 +00:00
c700e57cc7
preliminary 2.6.38 support
...
SVN-Revision: 25057
2011-01-21 17:52:22 +00:00
bb95af7a51
update package dependencies
...
SVN-Revision: 25050
2011-01-20 11:26:47 +00:00
4d465f4036
* revert [25002] * fixes EBU ack when EBU causes an irq
...
SVN-Revision: 25047
2011-01-19 15:56:27 +00:00
18ed5bca9b
fix null pointer access in mach-dir-600-a1.c machine setup ( #8671 )
...
SVN-Revision: 25043
2011-01-18 18:04:50 +00:00
5c8c4a2c1f
disable built-in MMC support
...
SVN-Revision: 25042
2011-01-18 14:53:21 +00:00
da7074758f
add missing config symbols
...
SVN-Revision: 25041
2011-01-18 14:53:15 +00:00
a303220605
mpc85xx: disable the i8259 irq on mpc8548cds (but leave the controller initialized) - it shares an irq with the pcie device which causes irq storms
...
SVN-Revision: 25037
2011-01-18 14:43:44 +00:00
100211927c
add missing keyboard symbol
...
SVN-Revision: 25036
2011-01-18 12:10:26 +00:00
cc7e8eabb1
Missing symbols for CONFIG_xxx .. Thanks Philip Prindeville
...
SVN-Revision: 25031
2011-01-17 05:49:02 +00:00
8740549c57
mpc85xx: add a new 'spe_fpu' feature flag for the FPU used on freescale powerpc cpus The SPE FPU is ABI-incompatible with the regular powerpc FPU, this needs to be reflected in the toolchain target name. Fixes floating point crashes in user space
...
SVN-Revision: 25018
2011-01-16 01:25:06 +00:00
9299345c7f
add missing kernel kernel config symbol
...
SVN-Revision: 25017
2011-01-16 01:25:02 +00:00
d80506e8d5
mpc85xx: clean up bogus kernel config overrides
...
SVN-Revision: 25016
2011-01-16 01:24:57 +00:00
d6d301bb14
mpc85xx: fix mpc8548 support (reorder serial ports, add default stdout path to device tree), enable pcie
...
SVN-Revision: 25015
2011-01-16 01:24:53 +00:00
63aeef20c0
move irq.c from patch into own file
...
SVN-Revision: 25002
2011-01-15 03:32:16 +00:00
0b98f1f64f
ar71xx: rework WNDR3700 image generation
...
SVN-Revision: 24983
2011-01-14 10:37:14 +00:00
b99f5f9c4a
ar71xx: build separate image for the WNDR3700 with NA region
...
SVN-Revision: 24982
2011-01-14 10:37:11 +00:00
3c43d6fb30
Update gumstix profile
...
SVN-Revision: 24979
2011-01-14 09:38:20 +00:00
3559931d8f
Fix i2c driver and package it
...
SVN-Revision: 24975
2011-01-13 12:01:07 +00:00
c4238a64ac
Allow module compilation for adc driver
...
SVN-Revision: 24974
2011-01-13 11:00:47 +00:00
541bebf4ec
brcm47xx: add gpio_set_debounce function
...
SVN-Revision: 24968
2011-01-11 20:05:01 +00:00
b67bbfe287
ar71xx: fix wlan LED on the TL-WR741 board
...
* Patch from #8630
SVN-Revision: 24963
2011-01-11 08:20:47 +00:00
dd53effe15
ar71xx: fix wrong names of the WPS LED/button
...
Reported-by: Nuno Gonçalves
SVN-Revision: 24961
2011-01-10 18:15:47 +00:00
8067116c10
kernel: deactivate ext4 SElinux support and extended attributes support in general config. This effects the build in kmod-fs-ext4 and when it is build into the kernel in the x86 target.
...
Thank you Philip Prindeville
SVN-Revision: 24951
2011-01-09 22:43:06 +00:00
088d334311
generic: generic: remove MIPS device tree backport patch from 2.6.36
...
It makes no sense without a platform which uses that.
SVN-Revision: 24946
2011-01-09 09:52:12 +00:00
a894d10d4d
ar71xx: remove the gpio_wr_fix patch
...
SVN-Revision: 24945
2011-01-09 09:29:51 +00:00
23a6173099
ar71xx: use gpio_*_cansleep calls in the rb4xx NAND driver
...
SVN-Revision: 24944
2011-01-09 09:29:45 +00:00
5641e8233e
generic: rtl8366: fix build error
...
SVN-Revision: 24943
2011-01-09 05:36:44 +00:00
505f0e7a86
ar71xx: add kmod-ledtrig-usbdev for the MZK-W04NU profile as well
...
SVN-Revision: 24941
2011-01-08 21:04:57 +00:00
271ce88567
ar71xx: add kmod-ledtrig-usbdev to the relevant profiles
...
SVN-Revision: 24940
2011-01-08 21:02:25 +00:00
792a1fb2c0
generic: rtl8366: enable vlans before enabling the ports
...
SVN-Revision: 24939
2011-01-08 20:24:29 +00:00
c16715f8d2
generic: rtl8366: enable ports only after VLAN configuration is done
...
SVN-Revision: 24938
2011-01-08 20:24:26 +00:00
0bcc97ac26
generic: rtl8366: add enable_port helper
...
SVN-Revision: 24937
2011-01-08 20:24:22 +00:00
5120660512
generic: rtl8366_smi: init VLANs only in first switch initialization
...
SVN-Revision: 24936
2011-01-08 20:24:18 +00:00
d88fc86fca
generic: rtl8366s: use correct bitmasks in sanity checks
...
SVN-Revision: 24935
2011-01-08 18:04:04 +00:00
ec9b5d6243
generic: rtl8366s: add vlan fid support
...
SVN-Revision: 24934
2011-01-08 18:04:00 +00:00
72779e560b
generic: rtl8366: add debugfs file for VLAN4K table
...
SVN-Revision: 24933
2011-01-08 18:03:57 +00:00
a4472870bd
generic: rtl8366rb: use correct bitmasks in sanity checks
...
SVN-Revision: 24930
2011-01-08 11:28:35 +00:00
0de8689b70
ar71xx: use spinlock in ar71xx_device_{start,stop}
...
SVN-Revision: 24929
2011-01-08 11:28:32 +00:00
271bb8385b
ar71xx: add kmod-usb-ohci module for the WNDR3700 profile
...
SVN-Revision: 24927
2011-01-08 10:51:20 +00:00
a6ede8ac59
Drop support for older kernel versions
...
SVN-Revision: 24915
2011-01-06 01:33:19 +00:00
4f7abc1c7a
Add 2.6.37 support
...
SVN-Revision: 24914
2011-01-06 01:32:17 +00:00
e8cee6c850
fix unbalanced mutex_lock/mutex_unlock in mini_fo getxattr op. Thanks Daniel Dickinson for tracking this down
...
SVN-Revision: 24906
2011-01-05 03:07:56 +00:00
dcec7f5e20
disable CONFIG_EXT4_FS_XATTR on kernel 2.6.35 and 2.6.37, this exposes a mutex bug in mini_fo leading to hard lockups with various filesystem operations
...
SVN-Revision: 24905
2011-01-05 02:48:19 +00:00
b99a637795
ramips: ramips_esw: fix typos
...
Patch from #8577 .
SVN-Revision: 24898
2011-01-04 13:44:05 +00:00
061228d73c
ar71xx: make uci-default scripts executable
...
Reported-by: Nuno Gonçalves <nunojpg@gmail.com>
SVN-Revision: 24897
2011-01-04 13:44:01 +00:00
d6af00c555
brcm47xx: fix compile problem when serial is deactivated.
...
Thank you Andrey
SVN-Revision: 24885
2011-01-02 20:53:09 +00:00
74f55db5e1
generic: more CONFIG_KEYBOARD_* symbols
...
SVN-Revision: 24860
2010-12-30 20:10:18 +00:00
72ba27ae72
cns21xx: add initial support for the Cavium CNS21xx SoC
...
SVN-Revision: 24859
2010-12-30 17:19:16 +00:00
757315f80e
generic: update ARM mach-types
...
SVN-Revision: 24854
2010-12-29 20:01:35 +00:00
06c41ce02e
generic: add missing CONFIG_KEYBOARD_* symbols
...
SVN-Revision: 24852
2010-12-29 18:08:06 +00:00
51dbb3d661
generic: add CONFIG_DEBUG_ICEDCC symbol
...
SVN-Revision: 24850
2010-12-29 17:29:01 +00:00
c6d9ec5173
multiple SPI driver fixes
...
- fix platform device registration
- fix chipselect, command register defines, add missing clock
- make slave select proper
- fix multibytes transferts
Signed-off-by: Tanguy Bouzéloc <tanguy.bouzeloc@efixo.com>
SVN-Revision: 24849
2010-12-29 16:19:59 +00:00
a623456e93
target/linux: sync to kernel 2.6.37-rc8, refresh patches
...
SVN-Revision: 24847
2010-12-29 13:24:17 +00:00
dc9c1ac1f7
patches-2.6.35: mtd flashmap: Really fixed sparelen and rootfslen. The real rootfslen for OpenWRT images comes from a bigendian uint32_t in reserved1 of the bcm_tag, which is now used to correctly calculate the rootfslen (and thus the sparelen).
...
SVN-Revision: 24843
2010-12-28 08:10:32 +00:00
5ee2a6c696
patches-2.6.36: Fix flashmap spare length calculation from previous commit (for rootfs and rootfs_data mtd partitions). Apparently the interruption in working on it resulted in an incorrect memory of getting it working.
...
SVN-Revision: 24842
2010-12-28 04:05:04 +00:00
093ebfe217
spi driver: remove bcm_rset usage
...
Since bcm636x platform embeds two spi master device,
the attached patch removes static bcm_rset usage, replaced by
"bs->regs" field for all I/O operation.
Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com>
SVN-Revision: 24840
2010-12-28 00:24:50 +00:00
600b8aba3f
gemini: enable GPIO sysfs interface
...
SVN-Revision: 24839
2010-12-27 08:10:05 +00:00
fc3a1d0ba3
Added OpenWRT-specific field to imagetag so that we can record the real root length, so that when the CRC fixup is applied and the root length is recorded as zero we can still calculate the rootfs mtd partition size.
...
Signed-off-by: Daniel Dickinson <daniel@cshore.neomailbox.net>
SVN-Revision: 24838
2010-12-26 04:18:13 +00:00
6ee5411686
base-files: Added uci-defaults script to run mtd fixtrx on firstboot for devices that need it.
...
Signed-off-by: Daniel Dickinson <daniel@cshore.neomailbox.net>
SVN-Revision: 24836
2010-12-26 04:18:04 +00:00
31f7259e3e
mtd flashmap: Switched to calculating the rootfs size rather than depending on being given the size in the imagetag. This is because solving the problem of second boot CRC errors requires changeing the rootfs size in the image to zero.
...
Signed-off-by: Daniel Dickinson <daniel@cshore.neomailbox.net>
SVN-Revision: 24834
2010-12-26 04:17:56 +00:00
cd540fed5b
Import an experimental ADC driver
...
SVN-Revision: 24814
2010-12-23 15:20:26 +00:00
0f659a13dd
ar71xx: add support for TL-WR740N v1
...
Same as TL-WR741ND but with different hardware ID and without
detachable antenna.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
SVN-Revision: 24811
2010-12-23 12:42:16 +00:00
76774e1daa
upgrade u-boot to v2010.12
...
SVN-Revision: 24810
2010-12-23 00:08:55 +00:00
acb5e80846
kernel: add config option added in kernel 2.6.37-rc7 to generic and run make kernel_oldconfig for brcm47xx.
...
SVN-Revision: 24805
2010-12-22 19:44:54 +00:00
d5bda1db31
kernel: refresh patches with kernel 2.6.37-rc7
...
SVN-Revision: 24804
2010-12-22 19:43:25 +00:00
4bee3672dd
brcm47xx: refresh patches with kernel 2.6.37-rc7
...
The deleted patches went upstream in 2.6.37-rc7
SVN-Revision: 24803
2010-12-22 19:42:37 +00:00
1ccae0efc0
uml: this patch went upstream
...
SVN-Revision: 24802
2010-12-22 18:20:50 +00:00
22d8dcbf44
adm5120: make patches apply again and refresh them
...
SVN-Revision: 24800
2010-12-22 17:19:36 +00:00
72ca63488b
kernel: use tab in front of ledtrig-netdev.o and refresh kernel
...
SVN-Revision: 24798
2010-12-22 17:18:11 +00:00
93e09b14eb
brcm47xx: wgt634u mac address fix
...
The Netgear wgt634u uses minus between the hex digest of the mac
address and all other broadcom devices are using colons between the hex
digest. Now the mac address is correctly parsed also when minus is used.
SVN-Revision: 24749
2010-12-21 13:34:09 +00:00
1d6fbd2e85
* fixes duplicate registration of dwc_otg usb core
...
SVN-Revision: 24738
2010-12-20 17:56:09 +00:00
2c0596cd69
unifi: add sysupgrade and leds support
...
SVN-Revision: 24737
2010-12-20 17:28:34 +00:00
0f157c1ad2
mpc85xx: fix up kernel config and make the target boot on the MPC8568E-MDS-PB board
...
SVN-Revision: 24736
2010-12-20 14:25:25 +00:00
4869f2c5e8
fix layer7 patches for Kernels >= 2.6.35, thanks Daniel Gimpelevich
...
SVN-Revision: 24728
2010-12-19 16:46:47 +00:00
6acfae9379
ar71xx: enable ar7240 switch support on the UBNT NanoStation M Fixes broadcast frames on the second ethernet MAC
...
Signed-off-by: Alexander Couzens <lynxis@c-base.org>
SVN-Revision: 24723
2010-12-19 11:56:42 +00:00
b512523d6f
ar71xx: fix micrel phy patch (Patch from #8041.)
...
SVN-Revision: 24718
2010-12-19 10:05:55 +00:00
96da72dc56
generic: fix min/max confusion in jffs2_sum_init on 2.6.32
...
SVN-Revision: 24652
2010-12-17 20:34:26 +00:00
cafe08a1b2
ar71xx: remove stray semicolons
...
SVN-Revision: 24651
2010-12-17 17:57:20 +00:00
01c76bf128
ar71xx: fix WLAN LEDs on the DIR-825 board
...
SVN-Revision: 24650
2010-12-17 17:10:21 +00:00
c1d3a23d19
ar71xx: add helper function to setup ath9k LED/GPIO on the AP94 based boards
...
SVN-Revision: 24649
2010-12-17 17:10:19 +00:00
e7ea6387a3
ar71xx: use usbdev trigger for USB LEDs by default
...
SVN-Revision: 24648
2010-12-17 17:10:16 +00:00
a059a11ee1
generic: add LED trigger for USB device presence/activity
...
SVN-Revision: 24646
2010-12-17 17:10:11 +00:00
3b8a79395a
generic: add usb_find_device_by_name helper
...
SVN-Revision: 24645
2010-12-17 17:10:08 +00:00
0d01356fc6
generic: nuke 2.6.33 specific stuff, is not used by any platform
...
SVN-Revision: 24644
2010-12-17 17:10:04 +00:00
8390b7dc9b
ar71xx: UBNT Secondary MAC address duplicate fix
...
There is Secondary MAC address duplicate problem with some UBNT
RouterStation and RouterStation Pro HW batches as Primary MAC addresses
are not increased by 2 per device in board data. Fix is to use 'Locally
Administrated bit' for Secondary MAC address instead of increasing
Primary MAC addresses by 1 which could overlap with other device
Primary MAC address.
Signed-off-by: Kestutis Barkauskas<keba@devint.net>
SVN-Revision: 24643
2010-12-17 17:10:01 +00:00
a26c3e60e2
ar71xx: populate LED configuration for WZR-HP-G300NH
...
Signed-off-by: Dave Lichterman <laviddichterman@gmail.com>
[nand-disk trigger has been removed - juhosg]
SVN-Revision: 24642
2010-12-17 17:09:57 +00:00
9daa5485ba
brcm47xx: add ssb debug option.
...
This fixes a problem with wrt350n.
It boots only if this config option is set, otherwise it reboots after "Switching to clocksource MIPS"
Thank you sn9 for fixing this problem.
SVN-Revision: 24626
2010-12-16 19:35:59 +00:00
1da5dcbb7a
brcm47xx: add some missing pci ID for tg3 driver
...
Broadcom removed these pci id, but at least the wrt350n has a Ethernet
controller with a pci id of 14e4:1676
Thank you sn9 for fixing this problem.
SVN-Revision: 24625
2010-12-16 19:31:05 +00:00
c58d8a369c
brcm47xx: this patch went upstream
...
SVN-Revision: 24624
2010-12-16 19:26:55 +00:00
a2a5598c00
ar71xx: add wlan led for the TL-WR941ND
...
SVN-Revision: 24612
2010-12-15 19:55:50 +00:00
e421d2575f
ar71xx: UBNT M-Series MAC address fix
...
UBNT M-Series devices have 2 MAC addresses in board data.
Fix is to use both entries from board data instead of one entry.
Signed-off-by: Kestutis Barkauskas<keba@devint.net>
SVN-Revision: 24611
2010-12-15 19:55:47 +00:00
87f73331a4
revert r24604
...
SVN-Revision: 24605
2010-12-15 12:24:27 +00:00
164c97838a
target/linux: clean up non generic & obsolete kernel options for 2.6.36, 2.6.37
...
SVN-Revision: 24604
2010-12-15 12:15:46 +00:00
6c1ace2f28
ar71xx: init the LED pin for ath9k on the TL-MR3[24]20 boards
...
SVN-Revision: 24569
2010-12-14 18:01:04 +00:00
a7750dae90
ar71xx: add helper function to setup LED pin and GPIO on the AP91 based boards
...
SVN-Revision: 24568
2010-12-14 18:01:00 +00:00
5e3e1d4a02
* make the usb gpio configurable * 105-header_xway.patch has a corrupt line count in it
...
SVN-Revision: 24564
2010-12-14 13:02:49 +00:00
d2fdd1dbe1
ramips: remove 2.6.3[24] support
...
SVN-Revision: 24562
2010-12-14 08:00:31 +00:00
1403850be1
ramips: switch to 2.6.36
...
SVN-Revision: 24561
2010-12-14 08:00:29 +00:00
f9898e30fb
ramips: handle OTG interrupt on the RT305x SoC
...
SVN-Revision: 24560
2010-12-14 08:00:25 +00:00
1f002efd98
bump kernel version, add MAINTAINER entry
...
SVN-Revision: 24559
2010-12-14 07:58:24 +00:00
d4bf98f231
add plemininary ultrasparc support
...
SVN-Revision: 24558
2010-12-14 07:57:22 +00:00
5495be1421
Update package selection
...
SVN-Revision: 24544
2010-12-13 12:59:22 +00:00
81edc28358
enable mach support for OpenRD Base and OpenRD Client ( #8417 ), spare the rest
...
SVN-Revision: 24541
2010-12-13 10:06:40 +00:00
5a351509aa
base-files: use shutdown instead of stop when the system goes down (patch by tripolar)
...
SVN-Revision: 24540
2010-12-13 08:01:21 +00:00
9f47e80bb3
adds new lantiq kernel. once the codebase is fully tested and know to be working on all the devices previously supported by ifxmips, we will drop ifxmips support.
...
SVN-Revision: 24526
2010-12-12 22:57:16 +00:00
b8ab3d34eb
kernel: update kernel versions Update kernel 2.6.32.26 to 2.6.32.27 Update kenrel 2.6.36.1 to 2.6.36.2
...
SVN-Revision: 24486
2010-12-11 16:07:21 +00:00
9f38f9bf76
ar71xx: add missing files for the JA76PF board
...
SVN-Revision: 24444
2010-12-10 19:55:28 +00:00
44e22cbd49
Fixed Comtrend CT536_CT5621 board settings. These boards are based on the 96348GW-11 reference design but have different GPIOs therefore we use the board fixups now availabed (thanks the patches by Jonas Gorski) to create a separate board entry for these boards and leave the reference design with reference GPIOs. Also these boards only have enet1 (no enet0) so we set that in the board definition, and use a defconfig for a single interface network.
...
SVN-Revision: 24442
2010-12-10 18:59:58 +00:00
b680f088ba
ar71xx: add support for the jjPlus JA79PF
...
Patch-by: Cezary Jackiewicz
SVN-Revision: 24440
2010-12-10 17:57:51 +00:00
5b0c83edd9
ar71xx: add support for the TP-LINK TL-MR3220 v1 board
...
SVN-Revision: 24439
2010-12-10 17:57:48 +00:00
83834da33b
ar71xx: add default network configuration file for the TL-MR3420
...
SVN-Revision: 24437
2010-12-10 17:57:40 +00:00
1fa3e7a941
ar71xx: do not throw compile errors if the nbg460n uboot is not selected
...
SVN-Revision: 24426
2010-12-10 16:07:27 +00:00
d9c68341ef
ar71xx: select u-boot for the NBG460N in the Default/Minimal profiles as well
...
SVN-Revision: 24421
2010-12-10 15:17:08 +00:00
081796fe47
ar71xx: add nbg460n image generation
...
This adds image generation for NBG460N/550N/550NH boards.
Signed-off-by: Michael Kurz <michi.kurz@googlemail.com>
SVN-Revision: 24419
2010-12-10 15:17:03 +00:00
ce0984ec5d
linux/generic: update & refresh 2.6.36 & 2.6.37. ( closes #8324 )
...
SVN-Revision: 24370
2010-12-08 21:20:40 +00:00
502dc1cb39
add optimization to Freescale targets
...
SVN-Revision: 24341
2010-12-08 11:27:06 +00:00
502d21dc2a
ramips: ramips_esw: add more definitions
...
SVN-Revision: 24340
2010-12-08 10:15:33 +00:00
bf58ef7c6d
ramips: ramips_esw: add helper function to set pvid
...
SVN-Revision: 24339
2010-12-08 10:15:28 +00:00
692d379b50
ramips: ramips_esw: add helper function to set vlan members
...
SVN-Revision: 24338
2010-12-08 10:15:25 +00:00
f7c3f91074
ramips: ramips_esw: add helper function to set VLAN id
...
SVN-Revision: 24337
2010-12-08 10:15:22 +00:00
0d2ad7a816
ramips: ramips_esw: introduce rt305x_esw_rmw{,_raw} function
...
SVN-Revision: 24336
2010-12-08 10:15:16 +00:00
7b878dde4b
ramips: ramips_esw: use rt305x_esw prefix in function names
...
SVN-Revision: 24335
2010-12-08 10:15:14 +00:00
0fcedc7bda
ramips: ramips_esw: coding style cleanup
...
SVN-Revision: 24334
2010-12-08 10:15:12 +00:00
48e6a31812
ramips: ramips_esw: add defines for switch register offsets
...
SVN-Revision: 24333
2010-12-08 10:15:07 +00:00
74c13f06df
ramips: ramips_esw: don't touch GPIO_PURPOSE register
...
It must have been set by the board initialization code.
SVN-Revision: 24332
2010-12-08 10:15:04 +00:00
3b9a6adc7d
ramips: ramips_esw: convert it to be a platform driver
...
SVN-Revision: 24331
2010-12-08 10:15:00 +00:00
889729df01
ramips: ramips_esw: move hardware initialization into a separate function
...
SVN-Revision: 24330
2010-12-08 10:14:58 +00:00
8957f39064
ramips: ramips_esw: use a private structure for the functions
...
SVN-Revision: 24329
2010-12-08 10:14:54 +00:00
f586bb26dd
ethernet driver fixup for ppc4xx
...
SVN-Revision: 24328
2010-12-08 08:59:31 +00:00
7224337d71
Profiles: GW6X00: Replace ext2 module with ext4 as ext2 and 3 are going away. Remove kmod-loop as the need for it has been superseded by block-extroot, and remove kmod-fs-vfat as it takes space and is rarely needed.
...
SVN-Revision: 24316
2010-12-08 00:40:31 +00:00
2a86dcc3d6
Profiles: Make buttons and led modules included by default so that failsafe will work in the case of builds for releases.
...
SVN-Revision: 24315
2010-12-08 00:40:28 +00:00
c6ef9a0720
Profiles: Move wpad-mini to the profiles that use it, rather than default for all profiles (because -wpad-mini means it's not selectable, which isn't what we always want for the No WiFi profile
...
SVN-Revision: 24314
2010-12-08 00:40:24 +00:00
4ab2416621
flash_chips: Added Macronix MX29LV640T Flash Chip support previously mistakenly added to brcm63xx. Thanks blunoise.
...
SVN-Revision: 24313
2010-12-07 19:45:08 +00:00
f8ed133c0a
patches: Renamed 150-led_count to 141-led_count so it comes before the 15-alice_gate2_leds.patch as which led count was mistakenly given the same number.
...
SVN-Revision: 24310
2010-12-07 17:32:29 +00:00
0e839ea40d
Revert "[brcm63xx] patches-2.6.35: Added flash chip definition for Macronix MX29LV640T."
...
This reverts commit 43511418ae2771a6662a83a254f06e37f4ac19e5.
It belongs in generic not brcm63xx.
SVN-Revision: 24308
2010-12-07 17:02:31 +00:00
183d628485
patches-2.6.35: Added flash chip definition for Macronix MX29LV640T. Thanks blunoise
...
SVN-Revision: 24307
2010-12-07 16:42:23 +00:00
8f9b14dafe
boards: Added GW6x00 fixups and GPIOs. The GW6200 GPIOs are different than the reference design 96348GW so we use fixup to allow us to define the correct ones, also the GW6000 has no GPIO-controlled leds.
...
SVN-Revision: 24305
2010-12-07 15:15:54 +00:00
3baa168e09
patches: Refreshed patches after led_count
...
SVN-Revision: 24304
2010-12-07 15:15:51 +00:00
b963cbde33
board definitions: Added patch for calculating led count, which was part of the patch removed in the previous commit
...
SVN-Revision: 24303
2010-12-07 15:15:47 +00:00
e5ca4d81f4
Remove patch 140-new_bcm96348gw_leds because it is really the GW6200 leds, not the generic 96348GW. Another commit will add the GW6200 specific boardid and leds. This removal reverts the 96348GW leds to the reference design GPIOs.
...
SVN-Revision: 24302
2010-12-07 15:15:41 +00:00
0fc35b30e3
kernel: fix cryptodev with kernel >= 2.6.35
...
The fix is from http://sourceforge.net/mailarchive/forum.php?thread_name=20100906035717.GA7562%40mcafee.com&forum_name=ocf-linux-users
Thank you tripolar for reporting the issue and finding a solution for it.
SVN-Revision: 24286
2010-12-06 17:01:10 +00:00
ad24e14b35
base-files: Added the preinit information for reset button and preinit indication led, and preinit interface
...
SVN-Revision: 24276
2010-12-06 06:46:03 +00:00
244db5ac6a
board definition: Fixed CPVA642 LED definitions
...
SVN-Revision: 24275
2010-12-06 06:45:57 +00:00
8316194016
board definitions: Added CPVA642 GPIO leds and buttons and refreshed patches later in series due to fuzz
...
SVN-Revision: 24274
2010-12-06 04:31:23 +00:00
7129521696
base-files: Added network defconfig because board only has one ethernet (4-port switch)
...
SVN-Revision: 24273
2010-12-06 02:01:08 +00:00
0449d92dd7
ramips: add support for 2.6.36
...
SVN-Revision: 24270
2010-12-05 20:14:38 +00:00
01a5cb48c8
ramips: default profile fix
...
Fix package names in default profiles.
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 24269
2010-12-05 20:14:35 +00:00
47dd3b9fea
ramips: use tabs instead of spaces in mach-f5d8235-v2.c
...
SVN-Revision: 24268
2010-12-05 20:14:30 +00:00
2f7964de3e
brcm47xx: do not read from CFE
...
SVN-Revision: 24267
2010-12-05 19:20:26 +00:00
852f7b37ed
brcm47xx: backport patch from kernel 2.6.37
...
Backport patches from r24162
brcm47xx: reorder patches like they were commitet upstream
SVN-Revision: 24266
2010-12-05 19:19:50 +00:00
7b1ae48645
brcm47xx: use on common files dir
...
SVN-Revision: 24264
2010-12-05 18:34:58 +00:00
044ea01f9c
preliminary support for Freescale MPC85xx based boards
...
SVN-Revision: 24259
2010-12-05 11:38:59 +00:00
8067f3f3cc
ar71xx: work around a PCI controller bug which causes reads to the PCI_COMMAND register to return bogus values - properly fixes ath9k module reload issues
...
SVN-Revision: 24236
2010-12-04 01:32:15 +00:00
187359dc67
remove unused kernel versions, make 2.6.36 the default
...
SVN-Revision: 24223
2010-12-03 09:19:52 +00:00
41b3383499
brcm47xx: Add edimax PS1208mfg support
...
Thank you clemvangelis for the patches. (closes #7672 )
SVN-Revision: 24217
2010-12-02 21:27:54 +00:00
6f7e2d4ce8
tune rtl8366s default config, make vlan 1 cpu port tagged and use eth0.1 for the lan interface - this brings the configuration more in line with other switch setups
...
SVN-Revision: 24215
2010-12-02 20:19:55 +00:00
79c24b2cb0
ar71xx: refresh patches
...
SVN-Revision: 24210
2010-12-01 18:40:01 +00:00
17564e7db8
generic: yet another missing config symbol for 2.6.37
...
SVN-Revision: 24208
2010-12-01 18:39:55 +00:00
30b950154b
add a new image for the TEW-652BRP which can be used with the bootloader recovery option
...
SVN-Revision: 24196
2010-11-30 02:04:57 +00:00
2fe5c1d124
backport two changes from kernel.org: 65e9b62d4503849b10bedfc29bff0473760cc597 ipv6: add special mode accept_ra=2 to accept RA while configured as router
...
c3bccac2fa76f1619dfe4fb7b9bee69de7f066d8
ipv6: add special mode forwarding=2 to send RS while configured as router
SVN-Revision: 24195
2010-11-30 01:52:51 +00:00
9677b65cb6
image Makefile: Corrected router imagename length limiting. Thanks KanjiMonster for reminding me.
...
SVN-Revision: 24191
2010-11-28 22:13:00 +00:00
314bce63e6
bcm63xx: Add support for the T-Com Speedport W 500V.
...
Add support for the T-Com Speedport W 500V using a special tagged image as it
identifies itself as a 96348GW, but has some gpios wired differently, and also
has only one ethernet port without a switch attached to it.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 24190
2010-11-28 22:04:44 +00:00
3a49f669f2
bcm63xx: Add board id override fixup.
...
Add a fixup for the kernel to check the bcm tag of the image for a boardid in
the information1 field, and use that instead of the supplied one by cfe. This
is triggered by a + at the start of the information1 field.
Also modify the image generation to generate apropriately tagged images.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 24189
2010-11-28 22:04:40 +00:00
c51d772e62
bcm63xx: Finalize support for DSL-274xB, rev C2.
...
The DSL-2740B/DSL-2741B rev C2 support was missing the board definition,
resulting in a kernel panic on boot.
This patch adds it, and also renames the generated image name to properly
reflect that it is for the revision C2, and for both the DSL-2740B and
DSL-2741B.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 24188
2010-11-28 22:04:36 +00:00
8fa9b24a4c
bcm63xx: Allow 'colored' power leds.
...
Since some devices have more than one power led, they might be separated by
their color in the name. To also allow them to be on after leaving preinit,
set any status led starting with 'power' to on instead of only those with
the exact name of 'power'.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 24187
2010-11-28 22:04:30 +00:00
fec30c8c80
bcm63xx: Don't hardcode the switch ethernet interface in preinit.
...
Currently eth1 is hardcoded as the expected interface switches in diagmode.
This patch replaces the eth1 with the ifname, and also directly tests if
the interface specified by ifname has a switch attached.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 24186
2010-11-28 22:04:26 +00:00
b1b318750a
bcm63xx: Add defconfigs.
...
Port the mechanism for different default configurations from ar71xx and
use the old configuration as the default configuration. This should have
no functional differences to before.
While we are at it, remove the obsolete nat option.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 24185
2010-11-28 22:04:19 +00:00
a133b09b07
refresh patches and remove trailing whitespaces
...
SVN-Revision: 24181
2010-11-28 18:14:34 +00:00
27189b328e
refresh and refine 972-cpmac_multi_probe.patch, patch from sn9
...
SVN-Revision: 24180
2010-11-28 18:03:56 +00:00
629cc5b101
refresh 973-cpmac_handle_mvswitch.patch
...
SVN-Revision: 24179
2010-11-28 18:03:48 +00:00
a2aa5a227e
refresh and refine vlynq patch, patch from sn9
...
SVN-Revision: 24178
2010-11-28 18:03:42 +00:00
af2349b4bc
brcm47xx: remove support for old kernel versions
...
SVN-Revision: 24168
2010-11-28 14:08:04 +00:00
6f58cc20fc
brcm47xx: use kernel 2.6.36.1 as new default kernel for this target.
...
SVN-Revision: 24167
2010-11-28 14:05:31 +00:00
34d53c2be1
kernel: add missing config symbols for 2.6.37-rc3
...
Thank you maddes for reporting. (closes #8323 )
SVN-Revision: 24165
2010-11-28 11:14:25 +00:00
fb27da9487
brcm47xx: reorder patches like they were commitet upstream
...
SVN-Revision: 24162
2010-11-27 22:47:11 +00:00
b54002aa8e
remove CONFIG_ADM6996_PHY=y for ar7 and atheros - this driver is incomplete and should not be used yet
...
SVN-Revision: 24161
2010-11-27 22:40:26 +00:00
256f94dea4
kernel: add missing config option
...
SVN-Revision: 24157
2010-11-27 16:08:41 +00:00
e8881e29b6
patch 972-cpmac_multi_probe.patch correctly, thanks sn9
...
SVN-Revision: 24142
2010-11-25 12:18:41 +00:00
4b3ffba803
rename 973-cpmac_handle_mvswitch.c to 973-cpmac_handle_mvswitch.patch
...
SVN-Revision: 24141
2010-11-25 12:18:36 +00:00
80785891e8
handle mvswitch in cpmac, rework MII probing logic, patch from sn9 and Wipster
...
SVN-Revision: 24140
2010-11-25 11:58:02 +00:00
e7ecbdcaa8
handle new revisions of vlynq wrt reset sequence, patch from sn9
...
SVN-Revision: 24139
2010-11-25 11:57:57 +00:00
6f825a0be3
increase flash window size to 32MiB, patch from sn9.
...
SVN-Revision: 24138
2010-11-25 11:57:52 +00:00
ead8ab8403
update to the latest stable kernels
...
SVN-Revision: 24136
2010-11-24 18:50:11 +00:00
195d1d7446
image Makefile: Removed extraneous tab from Image/LimitName16 macro definition. The solves the strange whitespace in front of the image name in the info1 section
...
SVN-Revision: 24127
2010-11-24 11:06:13 +00:00
21c8d63505
ramips: add support for Belkin F5D8235 v2 board
...
No support for usb for now.
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 24126
2010-11-24 10:01:23 +00:00
90c0618011
generic: add rtl8366rb switch vlan fid support
...
Allows to use fids 0 to 7. Default is 0.
Those who will use this don't forget to `set vlan fid` every time
after `set vlan ports` if you want non default behavior.
Minor changes. Version bump.
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 24125
2010-11-24 10:01:21 +00:00
64b16b9f34
ramips: Use NET_IP_ALIGN instead of hardcoding 2
...
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
SVN-Revision: 24124
2010-11-24 10:01:18 +00:00
624cfc5c91
ramips: DMA map the correct RX skb size
...
The skb_reserve call prior to DMA mapping the RX skb reduced the skb
data len by 2. To not allow DMA to write behind the skb we should pass
the correct skb data len to the device.
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
SVN-Revision: 24123
2010-11-24 10:01:16 +00:00
f833e399f2
ramips: Don't trigger BUG_ON due to skb allocation failure
...
Instead just drop the rx'ed frame silently and reuse the already
available buffer.
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
SVN-Revision: 24122
2010-11-24 10:01:12 +00:00
Imre Kaloz
Jo-Philipp Wich
Michael Büsch
Florian Fainelli
Gabor Juhos
Hamish Guthrie
Felix Fietkau
John Crispin
Daniel Dickinson
Mirko Vogt
Claudio Mignanti
Hauke Mehrtens
Lars-Peter Clausen
Alexandros C. Couloumbis