3b90d3d520
Change Auto-Connect timeout
2021-06-03 18:59:07 +02:00
ceea7ef60b
Merge pull request #2465 from klutvott123/mcu-id-for-vtx-table-lua
2021-06-04 01:57:51 +12:00
b04c29c3f6
Merge branch 'master' into link-to-lua-scripts
2021-05-18 01:37:08 +12:00
c07529b6bc
Merge pull request #2470 from Asizon/dyn_notch_count_bandwidth
2021-05-18 01:14:13 +12:00
9c9f53813a
Add GPS rescue min dth
2021-04-11 20:20:16 +02:00
bd7634a290
Dynamic notch new parameters
...
Hide if not =>1.44
Remove unneeded show action
Update with new values
Fixing requested changes
Added frecuency label
2021-04-10 10:26:27 +02:00
e6c2e67c5b
Add support for OSD type variants
2021-04-06 09:46:09 +02:00
b283120bf0
Mcu ID for lua vtx table
...
Use mcu ID as filename for the vtx table .lua file.
2021-04-05 17:10:56 +02:00
b818794df0
Link to Betaflight lua scripts
...
Added link to the Betaflight lua scripts in the welcome text.
2021-04-02 18:15:15 +02:00
06c8e5075d
Merge pull request #2451 from haslinghuis/fix_818
...
Remove chrome references
2021-03-28 18:30:01 +13:00
bede10fe4e
Remove chrome references
2021-03-22 14:22:41 +01:00
d5553b2ee1
Fix persistant settings after changing FC
2021-03-22 00:21:29 +01:00
2ebdd016d7
Initial commit
...
Changes requested by review
2021-02-23 23:56:48 +01:00
e82e489e62
Fix darkmode on motor and servo tab
2021-02-18 13:18:44 +01:00
4165f58e36
Merge pull request #2395 from spatzengr/fwSliderDescriptions
...
Added tip for new FW sliders
2021-02-18 00:31:06 +13:00
d600bbab61
Merge pull request #2369 from bobbycisneros/master
...
Added OSD Up/Down reference element
2021-02-17 07:47:37 +13:00
6956b22cef
Added tip for new FW sliders
2021-02-14 17:33:45 +13:00
ad15724525
Merge pull request #2356 from haslinghuis/rearrange_motor_sensor
2021-02-14 12:36:00 +13:00
4d64cda9aa
Rearrange configuration and motor tab
2021-01-27 01:11:43 +01:00
41fb373c94
Add support for firmware side sliders
2021-01-17 23:02:19 +13:00
4c22f6e8c0
Bringing in changes from the trunk
2021-01-14 19:24:34 -06:00
f872f1375f
Show SmartAudio version on VTX tab; MSP reads vtx device status
2021-01-12 18:09:21 -06:00
73aceb6a37
Added OSD Up/Down reference element
...
Added control for OSD up/down reference to OSD tab.
2021-01-01 15:03:09 -06:00
d5d0146af7
Merge pull request #2296 from limonspb/esc_dshot_reverse
2021-01-01 15:31:06 +01:00
ca09909d6e
Motor direction dialog for Dshot escs
2020-12-31 22:26:43 -06:00
030a75a89e
Added Virtual Mode
2020-12-28 17:24:34 +01:00
61631b56d3
Total flights stats for OSD
2020-10-25 01:30:27 -05:00
9a69d86a0d
Merge pull request #2239 from haslinghuis/change-message
2020-10-23 11:10:23 +13:00
b371ed471d
Merge pull request #2237 from McGiverGim/remove_message_i18n
...
Parse messages file and use i18next vue plugin
2020-10-22 04:37:42 +13:00
dba61bc652
Parse messages file and use i18next vue plugin
2020-10-21 10:40:29 +02:00
2fe985b768
Change save to flash msg and remove duplicate
2020-10-21 03:30:59 +02:00
82aa47bf2f
Remove window title hack for Chrome
2020-10-19 11:27:16 +02:00
7fcc9efc72
Merge pull request #2182 from chmelevskij/chore/add-vue
2020-10-15 10:12:32 +13:00
d6cee386e8
Add Vue
...
Setup vue with gulp and initial components:
* Status Bar
* Logo
* Battery Legend
2020-10-14 17:51:03 +02:00
55c106be61
Add Thrust Linearization
...
Adds Thrust Linearization to the PID Tuning tab.
2020-10-11 21:34:21 +02:00
243d8e81eb
Add degrees to accelerometer for X and Y axis in sensor tab
2020-10-06 15:35:14 +02:00
5b4d9b9386
Merge pull request #2169 from haslinghuis/select_connect
2020-09-20 15:37:42 +12:00
9ae3230edd
detect default stm or cp210[x] serial port
2020-09-15 02:39:12 +02:00
fe1f57c069
featureAddAxisLabels
2020-09-10 02:32:01 +02:00
6370a0153c
Merge pull request #2146 from haslinghuis/feature-osd-unit-british
2020-08-25 01:26:06 +12:00
e4a85ccc2f
Motor output reordering feature
...
Fixed Sonar warnings
renaming MOTOR_REMAP to MOTOR_OUTPUT_REORDER<ING>
Sonar warning fix
Code style fixes after the code review
moving styles to css from the motors tab dialog
Dialog size of Androind devices
Raneming MSP_<SET>_MOTOR_OUTPUT_REORDERING to MSP2
removing old styles and js files reference to motor_remap folder
adding FC.* where needed to accomodate new master changes
fixed alphabetical order for FC settings MOTOR_OUTPUT_REORDER
css fix for Android for motor reordering dialog
2020-08-13 22:52:09 -05:00
317218377f
Added support for british units in osd - fixed all (;)
2020-08-06 14:08:34 +02:00
f7461dea4a
Added warnings about the limitations of power / amperage meter displays.
2020-08-03 01:23:06 +12:00
66946b76b4
Add Dutch translation
2020-07-27 09:51:18 +02:00
12d381998f
Cordova: add warning message when exiting the configurator
2020-07-08 15:50:58 +02:00
4efe0b2fb1
Merge pull request #2108 from mikeller/fix_non_supported_message
...
Fixed message about non-supported firmware.
2020-07-06 19:41:14 +12:00
05b7e73fa1
Merge pull request #1955 from fgiudice98/rpm-filters-defaults
2020-07-06 18:09:32 +12:00
69cd83abdd
Moved dialog to main page
...
And fixed some strings in messages.json
2020-07-05 20:20:06 +02:00
2b8b0a2417
Merge pull request #2103 from Asizon/add_vbatSagCompensation_to_ui
...
Added Vbat Sag Compensation to UI
2020-07-05 15:40:38 +12:00
69603ee46b
Defaults when switching rpm filtering
...
Added warning popup
2020-07-05 13:42:08 +12:00
a4d24a3d4f
Fixed message about non-supported firmware.
2020-07-05 12:43:50 +12:00
4f93e54ae6
Cordova framework integration, Android support, mobile UI & options tab
...
Cordova integration and android platform :
- Added cordova directory with required config
- Added cordova applications generation in gulpfile
- Added cordova development instructions
- Used cordova plugins to simulate missing chrome api plugins (chrome.serial and chrome.fileSystem)
- Added cordova clipboard support
- Added android operating system and Cordova gui mode
- Fixed some css and js files to make them working on Android as well as on computers
- Added --skipdep argument to accelerate cordova build (gulp task)
- Added a webview helper to help people to update the webview app of their device
New options tab :
- Added options tab replacing the options dropdown
- Added option to switch between phones UI and computers UI
Mobile interface and global interface improvements :
- Simplified the structure of the header with flex css
- Made headerbar and tab container responsive (compact headerbar and side menu)
- All tabs are adapted to mobile interface (except firmware flasher)
- The servos and adjustments tabs are not fully adapted but are "usable"
- Improved header bar animation
- Improved log expandation animation
- Added swipe gesture to toggle side menu
Fixes during the development :
- Logo position
- Dark mode
- Auto connection
- Error messages (cordova_chromeapi.js)
- Responsive grid
- Testing
- Disconnection
- Width of boxes inside the OSD tab
- Fixed cli tab
- OSD tab
- Motor stop switch
- White spaces in boxes
- Dialogs size
- Connect button state
- Prevent tablet with a height larger than 575px to switch to computers ui
- Fixed logging tab
- Fixed code smell
- Fixed yarn cordova plugin install issue
- Fixed content_wrapper
- Fixed vibrations when scrolling
- Fixed scrolling bar alignment
- Fixed dialogReportProblem height
- Fixed rates logo
- Fixed auto connection default value (true)
- Fixed D to D max
- Fixed dialogs
Added required messages in locales/en/messages.json file
Requested changes
2020-07-03 16:19:33 +02:00
18e84746e5
Add Vbat Sag Compensation to UI
...
Remove empty white line
Improve ff and vbatSag functions change events
Tooltip reviewing
2020-07-03 11:46:48 +02:00
322a34ee31
Rename AVG to Average
2020-06-21 08:30:57 +02:00
f5410499dd
Add FF Interpolation Options
...
Sonar issues
Move to Msp 1.44 and some fixes
sonar
sonar2
new sonar issues
Suggested changes
Default to AVG_2
Fix Indexation
remove HEAD word
fix API const and sonnar
2020-06-21 08:23:38 +02:00
dcdc15c5e3
Added Dynamic Lpf Dterm Curve Expo to UI
2020-06-17 21:22:18 +02:00
16b0cfc051
Fixed the antigravity feature switch.
2020-06-01 21:05:29 +12:00
6b2c59b571
[OSD] Add support for FrSky OSD
...
Add peripheral bit definitions to check the port function mask.
Depends on #1851
Depends on #1852
2020-05-25 14:53:17 +01:00
cc6769b065
Change magyar (Hungarian) to uppercase
2020-05-20 17:55:10 +02:00
c1395c004f
Changed frame title & brackets
2020-05-09 12:35:05 +01:00
325f6170ed
Update motor limit frame messages
...
Replaced references to 'Attenuation' and 'Limit' with 'Scaling'
2020-05-07 14:03:10 +01:00
0d5519a3d6
Updated D_min tooltip
2020-05-06 08:24:21 +02:00
8fd1c11ac3
Merge pull request #1997 from mikeller/remove_mag_declination
2020-05-04 01:02:43 +12:00
59cb2d29a0
Removed unused compass declination setting.
2020-05-02 23:16:06 +12:00
03fb93cb3e
order and description changed
2020-04-29 16:21:31 +02:00
e78ea1e0b6
missing tooltip added
2020-04-29 15:52:59 +02:00
d176724718
Merge pull request #1984 from mikeller/fix_dynamic_idle_rpm_units
2020-04-29 00:18:09 +12:00
267e4973cd
Add Traditional Chinese translation
2020-04-28 08:37:43 +02:00
0fcf3564c2
Add Hungarian translation
2020-04-27 15:17:50 +02:00
04054c3b41
Fixed units shown for dynamic idle.
2020-04-27 01:50:21 +12:00
aa98588379
Merge pull request #1976 from leocb/patch-2
2020-04-25 12:24:55 +12:00
466d504fcf
Improve pidTuningIdleMinRpmHelp Tooltip text
...
This phrase is more concise, direct to the point and uses less technical jargon that's better for the end-user that soes not care to what happens under the hood. Please correct me if I defined something wrong.
escaped double quotes chars
better IdleMinRPM tooltip
Thanks to ctzsnooze
Added wiki entry for Dynamic Idle
2020-04-23 05:42:15 -03:00
520a802844
better clarification on what motor limit is intended for
2020-04-21 22:00:20 -03:00
f7dd89a2d6
update motor limit tooltip example phrasing, add warning
2020-04-20 22:37:23 -03:00
bdf142962b
Fix Motor Limit Tooltip Examples
...
Battery types were inverted on the example for the Motor Limit feature tooltip
2020-04-20 22:28:39 -03:00
3b2d7a837d
PD Ratio Slider now adjusts D, fixes yaw P issue, tooltip update
...
Makes for more logical P:D ratio changes; fix P first, then tune D.
Also fixes issue with P:D ratio slider changing P on pitch and roll, but not yaw.
Allows increasing yaw P default to 45
Update tooltip message to suit change.
2020-04-20 22:49:51 +12:00
415d7fb841
Merge pull request #1962 from ctzsnooze/update-bidir-messages
...
update Bidirectional DShot messages
2020-04-20 22:47:26 +12:00
65d378639d
Fix the landing page - again. And fix the tabs broken in the last fix.
2020-04-20 21:33:07 +12:00
3348457e45
Updated link for new translators to point to the instructions in the Betaflight README.
2020-04-18 20:34:44 +12:00
c5158e1585
update Bidirectional DShot messages
2020-04-12 20:00:21 +10:00
eb6e269467
Added warning when connecting to firmware newer than configurator.
2020-04-12 17:37:09 +12:00
9908865b2c
Fixed the styling of the landing page.
2020-04-11 17:49:03 +12:00
69ab24e0f3
Merge pull request #1952 from Asizon/derivateToDMax
...
Renamed Derivative to DMax when using Dmin
2020-04-11 13:15:15 +12:00
efe82eccc7
Merge pull request #1933 from mikeller/support_disabled_motor_protocol
...
Added support for disabling the motor output protocol.
2020-04-11 12:41:50 +12:00
9f65a1088c
Derivate to DMax using Dmin
2020-04-08 10:54:23 +02:00
26c4b09015
Updating tooltips
2020-04-05 08:50:05 +02:00
153fa2b486
Added version information to Unified Targets when they are flashed.
2020-04-02 01:14:44 +13:00
ebd36055da
Added support for disabling the motor output protocol.
2020-04-01 02:00:08 +13:00
687ff4ccc9
added descriptions
2020-03-23 09:55:18 +01:00
ad91e65699
add i18n
2020-03-23 09:27:55 +01:00
43fe183d1d
Merge pull request #1927 from Asizon/osdChipDetectWarning
...
Improving osd chip detection warnings
2020-03-22 11:22:54 +13:00
aed5508669
Rename Efficiency to 'Battery efficiency' so it's grouped with other related elements in list
2020-03-21 00:17:27 -07:00
05a55c5b42
Improving osd detection warnings
2020-03-20 15:57:00 +01:00
c7894fc3d7
Merge pull request #1923 from mikeller/add_unstable_flashing_warning
...
Added warning when flashing unstable firmware.
2020-03-21 01:13:40 +13:00
7ef3fa6a2c
Add OSD_EFFICIENCY element to configurator
2020-03-19 09:59:00 -07:00
c8ee46f45c
Added warning when flashing unstable firmware.
2020-03-19 13:56:44 +13:00
b956ce2162
Remove "Return to saved values" button
2020-03-15 14:18:35 +01:00
99cecfdba8
Update KISS logo
...
Thanks Paul!
Don't try to open modal if already open
Don't assign button if modal already open
Changed rates type change warning
Max rate independent from deadband
New actual rates logo
Thanks to @Asizon and @igormedrano
2020-03-14 00:30:21 +01:00
70a8364e5c
Add rates type
...
Add rates type selection with working graphs and max angular speed
Fix deadband
MSP changes and fix actual rates limit
Small style changes and fixes
Fixes
Fixed the code pointed out in the review
Various sonar fixes
Updated the values of actual rates setting
Reduced logo size
Added analytics to rates type
Minor fix + rounding by step value
Now the calculation of the angle rate takes into account the values rounded by the step value (especially visible with values that are in deg/s)
Various fixes
Angle rate calculation in different functions
Fix for value step validation
Sonar fixes (mostly variables)
Force refresh to prevent errors ...
... when changing rates type after saving to eeprom
Logos refinement + minor changes
Touch to trigger travis
Fix Raceflight rate
2020-03-10 12:51:00 +01:00
94bd817aff
Merge pull request #1905 from Asizon/dynamicIdle
...
Dynamic Idle configurable
2020-03-06 08:23:12 +13:00
5ad9153a52
fix json
2020-03-05 17:38:55 +01:00
b7f9f2d8c0
Moved to Pid Tuning tab
2020-03-05 17:33:38 +01:00
8607d8293d
Merge pull request #1903 from mikeller/show_acc_calibration_warning
...
Show warning on connect when ACC is not calibrated.
2020-03-05 09:28:29 +13:00
bfc83238c4
Show warning on connect when ACC is not calibrated.
2020-03-05 00:35:18 +13:00
6aaababb1d
Adding Dynamic Idle
2020-03-04 10:36:32 +01:00
7e9cebfbf3
Adding Motor Output Limit and cellcount
...
Fix cell count min
Move tootltip`icons
Cosmetic changes
2020-03-03 01:34:08 +13:00
f4f6da02c6
Merge pull request #1891 from Asizon/maxRateWarning
...
High rates warning message to prevent desyncs
2020-02-28 10:06:17 +13:00
3c3ce71d8e
Merge pull request #1887 from mikeller/hide_factory_band
...
Hide the 'factory band' VTX table setting for VTX types that do not support it.
2020-02-23 10:48:57 +13:00
241f1addae
Added warning if factory bands selected in unsupported configuration.
2020-02-23 01:42:39 +13:00
036ef86a90
Warning message for high rates
...
sonar
Move to variable
sonar issues
2020-02-22 11:13:16 +01:00
d96b2319fa
Merge pull request #1883 from Asizon/itermRelaxCutoff
...
Iterm Relax Cutoff Update
2020-02-21 20:09:58 +13:00
d3afbfef75
Add Polish translation
2020-02-19 19:09:44 +01:00
32665bbd45
Add dedicated Helpicon for Cutoff
2020-02-17 12:03:46 +01:00
6ba32b94fc
ItermCutoff and tooltip
2020-02-16 12:46:09 +01:00
44cb725932
Merge pull request #1880 from rvdveen/low-capacity-warning
...
Add support for the 'mah capacity exceeded' osd warning
2020-02-15 23:41:52 +13:00
eb8a50016f
Add support for the 'mah capacity exceeded' osd warning
2020-02-15 10:22:49 +01:00
6e2682ea43
Add OSD Camera Frame element
2020-02-11 15:21:46 +01:00
682472e1b0
Merge pull request #1873 from mikeller/add_bind_button
...
Added bind button for receivers that support it.
2020-02-08 20:47:37 +13:00
0a92e90427
Added message to acknowledge binding.
2020-02-08 19:19:39 +13:00
719491635e
Merge pull request #1872 from etracer65/rename_acc_calib_arming_disabled
...
Rename ACC_CALIB arming disabled message to NO_ACC_CAL
2020-02-08 14:55:59 +13:00
abb3429b96
Merge pull request #1869 from Asizon/DynamicNotchMaxHz
...
Coordination with new Dynamic Notch improvements
2020-02-07 09:51:40 +13:00
e3041286a3
Add Dynamic Notch Max Hz
...
Remove white spaces
Remove white space2
Revert and add suggested changes
Some cosmetic changes
MinHz Changes
Fix MinHz Max
2020-02-06 09:27:44 +01:00
7881bd3673
Remove 32k notice
2020-02-06 09:09:56 +01:00
c2575935fc
Added bind button for receivers that support it.
2020-02-06 15:41:47 +13:00
01e35c2ecb
Rename ACC_CALIB arming disabled message to NO_ACC_CAL
2020-02-05 18:07:15 -05:00
9394d5901c
Work with gyro native sampling
2020-02-04 16:42:39 +01:00
d293d6b1e7
Added button to exit DFU.
2020-01-26 22:59:54 +13:00
5335d64def
Add custom fallback for Portuguese and Portuguese Brazilian
2019-12-28 15:03:13 +01:00
eab38147cd
Fixed URL for CP210x driver.
2019-12-26 13:54:46 +13:00
f3cefcef81
Add support for "Auto" RC Smoothing derivative type
2019-11-30 19:03:35 -05:00
2a79f7e612
Adds RC Channels element to the OSD
2019-11-13 08:53:37 +01:00
53fb5944d1
Add more parameters to GPS Rescue ( #1812 )
...
Add more parameters to GPS Rescue
2019-11-10 11:32:31 +13:00
1672a44dc2
Add more parameters to GPS Rescue
2019-11-08 08:45:17 +01:00
ce044622a2
Add Galileo and Home Point once to GPS
2019-11-06 19:25:56 +01:00
6f6f4738c4
Add tooltip and info for save lua button.
2019-10-28 21:11:00 +00:00
fe0cd8b910
Save vtx_table lua file.
2019-10-23 13:44:04 +01:00
218dc67231
Change "OpenLog" to "OpenLager" ( #1761 )
...
Change "OpenLog" to "OpenLager"
2019-10-23 13:20:32 +13:00
419ead452e
Add support for ACC_CALIB arming disabled flag ( #1739 )
...
Add support for ACC_CALIB arming disabled flag
2019-10-22 23:00:44 +13:00
ed8d2a79a9
Change OpenLog to OpenLager
...
OpenLog became not suitable for serial port logging as of 4.0.x.
2019-10-21 22:47:51 +09:00
8dc4e7829f
Add Basque translation
2019-10-20 17:33:04 +02:00
c6eaefd1b9
Add support for ACC_CALIB arming disabled flag
2019-10-12 19:15:51 -04:00
7ea8068b69
Fix small typos in English locale
2019-10-11 13:32:27 +03:00
8ebed0a53a
Add missing support for DSHOT_BBANG arming disabled flag
2019-10-10 21:10:22 -04:00
5655f099f9
Added introduction to Unified Targets.
2019-10-09 01:42:02 +13:00
71e538379a
Don't accept fancy lookin letters in Unified configs ( #1693 )
...
Don't accept fancy lookin letters in Unified configs
2019-09-29 19:24:23 +13:00
7133001fa2
revise limit to 255, and handle comments
2019-09-29 06:13:25 +00:00
f0a7462139
Fixed naming of the 'Altitude' graph in the sensors tab. ( #1690 )
...
Fixed naming of the 'Altitude' graph in the sensors tab.
2019-09-29 16:43:11 +13:00
0778587fcb
Fixed naming of the 'Altitude' graph in the sensors tab.
2019-09-29 15:58:00 +13:00
261ebd7bbe
Added support for Unified Target configurations with manufacturer_id in the name.
2019-09-27 15:48:03 +12:00
96619a4b58
Don't accept fancy lookin letters.
...
Backstory, Unified configs mean we can embed arbitrary text into the firmware, what is one source of text? Project Gutenberg!
I tried attaching a snippet of the text into the config (as comments, I am a careful deviant) and ended up learning a little about how text is encoded and handled these days.
Given a character with a value higher than 1 byte, the value gets cropped off, so 0x2018 would get flashed as 0x18, and would fail validation, because we'd be checking 0x2018 against 0x18
Asking Notepad++ to convert the document to ANSI was no good either, it decided to use Code page 1252, which still has fancy quotes, and when loaded into the configurator, instead of 0x92, it'd be converted to a replacement character FFFD if you want to look something up.
2019-09-26 22:06:47 +00:00
074bb46f78
Fix esc protocol tooltip for removed dshot1200 ( #1689 )
...
Fix esc protocol tooltip for removed dshot1200
2019-09-26 22:35:33 +12:00
f397cbcd2d
Fix forced dark mode if dark mode on OS level
2019-09-25 13:44:46 +02:00
9a74087762
Fix esc protocol tooltip for removed dshot1200
2019-09-24 20:33:10 +02:00
fa0325c1c7
Added analytics for battery calibration.
2019-09-16 21:13:35 +12:00
005868bc07
Added analytics for new configurator elements.
2019-09-15 22:15:25 +12:00
93e4cf83b8
Added dialog to offer resetting to custom defaults. ( #1651 )
...
Added dialog to offer resetting to custom defaults.
2019-09-15 10:23:32 +12:00
6999656097
Added dialog to offer resetting to custom defaults.
2019-09-15 00:54:39 +12:00
dde266a4de
Add paste from clipboard option to VTX tab ( #1650 )
...
Add paste from clipboard option to VTX tab
2019-09-15 00:43:30 +12:00
8b7f0353e5
Tuning sliders non expert mode limits
2019-09-13 01:46:47 +02:00
14034d129f
Improve filter tuning tip ( #1646 )
...
Improve filter tuning tip
2019-09-13 07:55:21 +12:00
abb9997d1d
Add paste from clipboard option to VTX tab
2019-09-12 15:41:43 +02:00
e1f6cb2be1
Add detailed instructions to the VTX Table ( #1644 )
...
Add detailed instructions to the VTX Table
2019-09-12 07:44:46 +12:00
02a6610a99
Improve filter tuning tip
2019-09-11 10:04:36 +02:00
62a0ba51a9
Further work: consider versions for unified targets ( #1626 )
...
Further work: consider versions for unified targets
2019-09-11 19:12:19 +12:00
000e537283
Finish up work on unified targets
2019-09-10 22:32:04 +00:00
d35b41cfe0
Add detailed instructions to the VTX Table
2019-09-10 20:02:50 +02:00
d54b9d1045
Reorder and make more consistent the Motor/ESC Configuration box
2019-09-10 22:24:11 +12:00
25fe13be25
Add RPM filter configuration
2019-09-07 15:35:45 +02:00
35dd326778
Add tuning sliders
2019-09-07 13:00:39 +02:00
9f63b994b9
Merge pull request #1616 from etracer65/mode_show_arming_disabled
...
Add visual indicator on ARM mode when arming is disabled by the firmware
2019-09-07 12:30:18 +12:00
2ba51a8019
Merge pull request #1615 from IvoFPV/vtx-warning
...
Add warning if Smartaudio port assigned and VTX table not set up
2019-09-07 12:30:03 +12:00
f7275c25f3
translate the (Legacy) bit, and only show it where needed
2019-09-05 04:15:22 +00:00
d6a86dd3c3
Add visual indicator on mode when arming is disabled
...
If arming is disabled (at the firmware level) but the channel is withing the arming mode activation range, display the mode in red to indicate arming not available.
2019-09-04 07:44:25 -04:00
ca6b1f4e0e
Add save/load buttons for the VTX Table
2019-09-04 12:03:00 +02:00
5b7d9bfa52
Add warning if SA port assigned and no Vtx Table
2019-09-03 19:35:08 +02:00
19106ae6cb
Merge pull request #1602 from McGiverGim/add_telem_info_motors
...
Add telemetry dshot data info to the motors tab
2019-08-30 01:19:01 +12:00
b065c8f4f7
Add telemetry dshot data info to the motors tab
2019-08-28 11:50:47 +02:00
a1349e6ac5
Merge pull request #1599 from IvoFPV/add-auto-smoothness-to-ui
...
Add rc smoothing auto smoothness to UI, fix refresh button and slowdown
2019-08-28 17:21:53 +12:00
67e11bb6e0
Fixed typo on vtxTablePowerLevelsTableHelp
...
County -> Country
2019-08-27 08:38:07 -03:00
759265cf8f
Fixed structure of VTX tab Introduction string
...
From:
You can configure here the values for your Video *Trasmitter* (VTX). You can consult and configure the values of the transmission including the VTX Tables if the flight controller and the VTX support it
To:
Here you can configure the values for your Video Transmitter (VTX). You can view and change the transmission values, including the VTX Tables, if the flight controller and VTX support it
2019-08-26 16:54:20 -03:00
70464f5ff2
Add rcsmoothing auto smoothness to UI
2019-08-25 20:06:09 +02:00
e3e79f6e81
Merge pull request #1584 from IvoFPV/piduiov2
...
Improve PID Tuning tab style and layout
2019-08-25 13:44:10 +12:00
4c0e9f06e5
Replace legacy firmware reboot sequence with MSP based sequence.
...
This allows two things:
1. good user experience when flashing devices that use FLASH
bootloaders. previously users would have to use `bl flash` or enter
flash bootloader manually.
2. arbitrary setting of cli reboot character without breaking ability to
reboot flash via configurator.
Squashed commits:
* Extract MSPConnector from code in stm32.js to allow reuse.
* Use reboot_baud when connecting via MSP.
* Ensure GUI connect is unlocked after connect failures.
* Support legacy reboot method for old firmware.
* Don't treat MSPConnector as a singleton.
* Fix `port` usage in handlers.
* Add short delay after closing serial port before re-opening it again.
2019-08-24 22:11:35 +02:00
61d0b1e857
Dmin set per default ratio
2019-08-24 09:57:35 +02:00
72b00c1d91
Add dmin note, remove spacer on wrap
2019-08-24 09:21:51 +02:00
0c267265d4
Clean up css
2019-08-23 17:20:45 +02:00
b3a5865a65
Fix messages
2019-08-22 14:05:04 +02:00
39a81a0728
Improve pid tuning tab style and layout
2019-08-22 12:17:22 +02:00
bb67dbbd72
Merge pull request #1569 from McGiverGim/add_vtx_tab
...
Add an VTX tab
2019-08-20 23:37:09 +12:00
0817e7d9e6
Add an VTX tab
2019-08-20 13:23:10 +02:00
541074238c
Add debug modes to blackbox tab ( #1566 )
...
Add debug modes to blackbox tab
2019-08-15 12:47:53 +12:00
bac0417975
Merge pull request #1567 from IvoFPV/adddynnotchtoui
...
Add dynamic notch settings to UI
2019-08-13 00:07:13 +12:00
2c42243bfb
Add unknown i18n
2019-08-12 09:04:12 +02:00
ec838fcd5a
Fix translations
2019-08-11 17:01:55 +02:00
7189363f98
Initial support for flashing EXST .hex files to External Flash. ( #1565 )
...
Initial support for flashing EXST .hex files to External Flash.
2019-08-12 02:41:31 +12:00
dcfb587302
Change notice and add api version check
2019-08-11 11:40:40 +02:00
065d7176f3
Add dynamic notch disabled warning
2019-08-11 11:09:50 +02:00
c2bae18846
Add debug modes to blackbox tab
2019-08-11 00:16:06 +02:00
b39f7df5f7
Add dyn notch to UI try2
2019-08-10 14:48:30 +02:00
7e371ee49e
switch languages without an app restart ( #1555 )
...
switch languages without an app restart
2019-08-10 18:16:40 +12:00
Mark Haslinghuis
Michael Keller
Hans Christian Olaussen
Asizon
Miguel Angel Mulero Martinez
Davor Kustec
UAV Tech
IvoFPV
Robert Cisneros
Ivan Efimov
visdauas
Tomas Chmelevskij
Ivan Efimov
WalcoFPV
fgiudice98
Alberto García Hierro
Míguel Ángel Mulero Martínez
Juzzle1
TheIsotopes
Leo Bottaro
ctzsnooze
Nicola De Pasquale
David Boone
Roy van der Veen
Bruce Luckcuck
Richard Cooper
jflyper
Anisotropic
Kyle K
Hydra