67c8cdcaac
Internationalise the Telemetry port dropdown option for 'Disabled'.
2015-03-05 15:57:23 +00:00
24dba62144
First working cut of new port configuration tab.
...
Migration from or configuration of pre 1.8.x firmware is not supported
but may be added later.
2015-03-03 22:56:48 +00:00
f3e14b73a2
Merge remote-tracking branch 'cleanflight/development' into serial-cleanup
2015-03-03 18:27:58 +00:00
c3f1c13d54
Move Documentation and Support links to separate tab. Add a
...
contributing section. Unify help/landing section CSS/html a little.
Expand the sponsors panel area in preparation for an updated section.
2015-03-03 16:27:40 +00:00
bbab895dd8
Merge branch 'development' into serial-cleanup
2015-02-27 01:16:44 +00:00
c423aaf44d
work-in-progress changes to go with the corresponding serial-cleanup
...
firmware branch.
2015-02-27 01:15:37 +00:00
ede3c367f2
Error message for saving to disallowed dir,fix flash save problem on osx
2015-02-27 09:14:47 +13:00
831e4a848e
Merge branch 'blackbox-flash' of
...
https://github.com/sherlockflight/cleanflight-configurator-dev into
sherlockflight-blackbox-flash
Conflicts:
_locales/en/messages.json
2015-02-22 21:51:18 +00:00
f89aaa1011
Add flight instruments to setup tab
2015-02-20 01:18:49 +00:00
ed285992da
Detect support for flash chip and disable tab if not available
2015-02-16 18:05:24 +13:00
49741b45a8
Add progress dialogs for flash save and erase
2015-02-13 21:05:36 +13:00
0f22b92e35
Add dataflash tab: Very basic functionality is working
2015-01-31 00:41:41 +13:00
35200e5a36
Support changing PID controller in the GUI.
2015-01-29 18:27:50 +01:00
506e9c43fb
Fix link for IRC web client.
2015-01-29 15:36:22 +01:00
975e863bd0
Enhance welcome tab by adding documentation and support panels with
...
links.
2015-01-29 05:21:02 +01:00
34b7b87c3e
Allow old API version to be used but disable LED strip tab and
...
backup/restore functionality in certain cases. Cleanup of tab
switching.
2015-01-26 22:37:55 +01:00
d269d60391
Improve user experience by adding tabs for the welcome and firmware
...
flasher.
The welcome (aka 'landing') and firmware flasher were already modelled
as tabs but were never displayed as tabs.
The UI didn't make sense when the whether the welcome message or
firmware flasher was displayed since there was no active tab or other
indication.
2015-01-25 17:37:47 +01:00
f480e05027
Merge branch 'led-strip' into development
2015-01-16 17:24:13 +00:00
7a674c9ab2
Display a message when the LED strip configuration has been saved.
...
Remove the old CLI panel.
2015-01-16 00:29:16 +00:00
519de30f6e
Allow saving of LED Strip configuratiion via MSP. Requires firmware
...
with new MSP_SET_LED_STRIP_CONFIG.
Remove some .toUpperCase() duplication since it was only needed for the
CLI commands panel.
Minor CSS cleanups.
Some variable and class renaming to align with firmware code.
2015-01-16 00:15:41 +00:00
9b083c9bb9
Update messages adjustments
...
Update messages adjustments PID to more accurate versions.
2015-01-12 08:26:25 +01:00
c5e2a13b6c
First cut of port of LED Strip configuration UI.
...
Thanks for the original code decompyler!
2015-01-08 21:46:43 +00:00
e4bc970680
Use i18n for tab switch message.
2015-01-08 11:38:10 +00:00
3a4ea7e1c1
Update messaging used when api version is incompatible.
2015-01-08 01:50:35 +00:00
6031907163
Merge branch 'development' of https://github.com/Roeland54/cleanflight-configurator into Roeland54-development
2015-01-08 01:37:19 +00:00
f5ba166c15
Add failsafe feature to RX section.
2015-01-08 01:06:42 +00:00
0285723fab
First cut of working configuration migration.
2015-01-07 20:15:22 +00:00
eda54f13db
Update RSSI channel configuration.
2015-01-07 13:51:08 +00:00
272cfea963
Merge branch 'master' into development
...
* master:
CLI available for old firmware versions
2015-01-06 20:38:05 +01:00
32a27b73a7
CLI available for old firmware versions
2015-01-06 20:35:58 +01:00
6df04c151a
Updating link to releases.
2015-01-05 11:47:17 +00:00
26d6c1a562
Allow baud rate configuration on the Configuration tab.
2015-01-04 10:28:32 +00:00
bfa689be40
Overhaul of the configuration tab.
2015-01-04 08:09:10 +00:00
b905632f0e
Merge branch 'UKTamo-patch-1' into development
2015-01-03 01:15:02 +00:00
c58ca02d8f
Merge branch 'patch-1' of https://github.com/UKTamo/cleanflight-configurator into UKTamo-patch-1
2015-01-03 01:14:36 +00:00
d671bff583
First cut of functional 'Ports' tab. Support backup and restore of
...
serial port scenarios and baud rates. Add note to 'features' tab.
2015-01-03 00:58:52 +00:00
fe72557b12
Removing more review related code. Adding skeleton of new Ports tab.
2015-01-02 19:31:50 +00:00
32820853ce
Updating to use API version 1.1.
2015-01-02 19:31:50 +00:00
0aa33393c4
Improve firmware flasher messaging.
2014-12-26 18:20:45 +00:00
7a800444b5
Force the user to pick a fimrware before loading
2014-12-25 00:02:18 +01:00
a7dc838cdc
Removing review code.
2014-12-24 18:58:29 +00:00
29018001c0
Change the text on the 'Save' button on the Configuration to 'Save and
...
Reboot' to reflect it's behaviour.
2014-12-21 14:45:06 +00:00
b58ffa9994
Rename 'Auxilary' tab to 'Modes' to be more user friendly.
2014-12-21 14:37:00 +00:00
7522d97092
Adjust tab titles for simplicity.
2014-12-21 14:14:53 +00:00
2be5eedf18
Add message about `dump` command to backup/restore note.
2014-12-21 12:38:22 +00:00
502cf718ab
Update backup/restore functionality so that it restores adjustments,
...
auxiliary settings and channel forwarding (per-profile). Add "Warning
Cell Voltage" to the UI.
2014-12-21 12:29:36 +00:00
e1d2fb3163
Update hardware list (sparky, cc3d, cjmcu, etc).
2014-12-21 00:37:18 +00:00
7692b7354a
Update configuration for Cleanflight settings.
2014-12-20 02:50:36 +00:00
ccc0b839e6
Minor tweaks to the firmwre flasher.
2014-12-19 19:48:19 +00:00
c6867d3c52
Update the firmware flasher to provide more details about the release.
...
Add warning message about target selection.
2014-12-19 16:04:42 +00:00
Dominic Clifton
Nicholas Sherlock
Richard Birkby
Roeland Lutters
Paul Rogalinski