ace46998ce
Merge pull request #354 from KiteAnton/additional_cli_time
...
Additional cli time for large text dumps
2016-05-28 13:47:11 +02:00
0a3eec8301
prepare for release
2016-05-12 14:23:46 +02:00
ce7f572ed3
prepare for release.
2016-05-12 14:20:37 +02:00
aba4569e50
display date warning after 91 days.
2016-05-12 14:20:21 +02:00
8ff238bf14
Update boards.js with some known boards.
2016-05-12 14:17:53 +02:00
b913ae57bd
Merge pull request #376 from digitalentity/mavlink-telem
...
Support for MAVLink telemetry
2016-05-12 14:08:46 +02:00
bad8350e7d
Merge pull request #371 from gaelj/Bugfix-Failsafe-delay
...
Issue #363 : max failsafe_delay should be 200
2016-05-12 01:46:34 +02:00
bc6d5d2f05
Merge pull request #369 from gaelj/Finer-mag_declination-control-in-GUI
...
Issue #153 : finer mag_declination in GUI
2016-05-12 01:02:04 +02:00
ca9b4662e0
Merge pull request #379 from gaelj/LED-Show-GPS-3D-fix-status
...
Support LED cmds GPS, RSSI & Blink in configurator
2016-05-12 00:57:43 +02:00
3d513aff52
Hide new LED buttons when msp version < 1.18.0
2016-05-08 23:34:48 +02:00
6c964164e4
Support LED cmds GPS, RSSI & Blink in configurator
...
Implement initial support for new LED commands implemented in CF PR
2101.
2016-05-08 15:24:29 +02:00
937f2caafe
Merge pull request #378 from skaman82/bat_status_css_cleanup
...
Removing calibration status animation from setup tab
2016-05-06 23:16:06 +02:00
6bc3343015
Removing calibration status animation
2016-05-06 23:11:45 +02:00
8ef6a1abe7
Merge branch 'development' into bat_status_css_cleanup
2016-05-06 23:02:00 +02:00
4865e4d616
Merge pull request #377 from skaman82/bat_status_css_cleanup
...
cleanup for #74
2016-05-06 23:00:54 +02:00
ef0484a072
cleanup for #74
2016-05-06 22:57:48 +02:00
ffaea530fb
Merge pull request #372 from gaelj/Top-Battery-Status-Icons
...
Issue #74 : Show battery & statuses in top bar
2016-05-06 22:50:47 +02:00
a8143e11c1
Support for MAVLink telemetry
2016-05-06 21:04:31 +10:00
c85f41ad3d
Battery icon; visual improvement
...
Thanks to @skaman82
2016-04-21 00:42:58 +02:00
469d174c68
Apply old mag_declination method for API < 1.18
2016-04-20 22:04:36 +02:00
0518ed6993
Issue #74 : Show battery & statuses in top bar
...
- Battery voltage appears as a horizontal bar
- Autodetection of battery type is used to calculate the bar min, max &
alarm values according to the battery configuration parameters.
- Color changes to red when battery level goes under the alarm setting
- Armed, failsafe and Serial Link status icons below battery voltage
monitor
- Change calibration button contents to "Calibrating" during calibration
2016-04-20 01:38:23 +02:00
a6807d5945
Issue #153 finer mag_declination in GUI
...
Allow declination to be set exactly in degrees,minutes (therefore uses
exactly the same value as in CLI instead of rounding it)
2016-04-18 23:19:07 +02:00
b4da6e6ab1
Fix issue #363 : max failsafe_delay should be 200
...
Update max value in html file
2016-04-18 22:41:51 +02:00
81a49d48b2
changes to support MSP API 1.17 (removal of 3d deadband configuration
...
via MSP_3D/MSP_SET_3D)
At somepoint we can add the support for the updated
MSP_DEADBAND/MSP_SET_DEADBAND commands.
2016-04-01 12:32:19 +02:00
a924e06c1b
Fix unable to enable LTM telemetry via ports tab.
2016-03-24 16:02:54 +01:00
c0038b43cc
Force a cleanup when a serial device is lost, this happens when VCP
...
targets reboot.
2016-03-24 14:51:13 +01:00
60bfeed194
Fix unable to reconnect after disconnecting when CLI was active.
2016-03-24 14:50:24 +01:00
eaf9297e8b
Additional time needed for large text dumps
2016-03-12 11:37:28 +01:00
42d4846765
Merge branch 'development'
2016-02-22 19:13:39 +01:00
ae700e6daf
Prepare for release.
2016-02-22 19:12:43 +01:00
103cc3195c
Update links and recovery procedure.
2016-02-22 19:12:34 +01:00
d319132135
Avoid exceptions when serial break or overruns occur without `info`
...
object.
2016-02-22 18:46:33 +01:00
56383fd9b9
Merge branch 'development'
2016-02-05 03:30:47 +01:00
ebd77db93f
Merge pull request #323 from dan557/development
...
Add Current and Voltage readout on configuration tab
2016-02-05 03:21:38 +01:00
e2c4a62630
increase background contrast when hovering over left hand navigation
...
items. fixes #331
2016-02-05 03:16:14 +01:00
576ba7390c
Prepare for release.
2016-02-05 03:11:26 +01:00
b0da87d584
Increase width of firmware target select box.
2016-02-05 03:11:15 +01:00
6935fa62ce
Merge pull request #321 from DL6ER/development
...
Add vibrations RMS to Motors tab
2016-01-30 12:32:22 +01:00
ede5fba126
Merge branch 'tracernz-page-size' into development
2016-01-30 12:19:45 +01:00
ed9927a4e5
Merge branch 'page-size' of https://github.com/tracernz/cleanflight-configurator into tracernz-page-size
2016-01-30 12:18:30 +01:00
ace6e32269
Merge pull request #330 from cleanflight/spracingf3mini-sdcard
...
Add support for the SPRacingF3Mini (SD Card Blackbox Logging, Race Transponder, VCP)
2016-01-30 12:16:36 +01:00
9fbb6337b6
DFU: Support STM32F4
2016-01-28 22:48:44 +13:00
b46a5e8053
USB-DFU: Detect flash page size from USB descriptor
2016-01-25 19:27:26 +13:00
6009a3db56
Fix led strip missing 'var' keyword.
2016-01-22 22:15:58 +01:00
cbe862d018
Prevent users for creating mode ranges and adjustment activation ranges
...
that are too small.
2016-01-22 22:15:57 +01:00
ab7ad4b07d
Handle 'overrun' conditions the same way as 'break' conditions.
2016-01-22 22:15:56 +01:00
2f6be0650f
Serial: Attempt recovery of break condition
2016-01-22 22:15:56 +01:00
2044fe879c
Fix for https://github.com/cleanflight/cleanflight/issues/1551
2016-01-22 22:15:55 +01:00
509adcb6ff
Update servo angles to match
...
https://github.com/cleanflight/cleanflight/pull/1573
2016-01-22 22:15:54 +01:00
1a58bfcf82
Add Race Transponder configuration support.
...
Also cleans up i18n support for 'features' and adds tooltip support for
them on the configuration tab.
2016-01-22 22:15:53 +01:00
Albert Kravcov
Dominic Clifton
Dominic Clifton
gael
Konstantin Sharlaimov (DigitalEntity)
KiteAnton
Michael Corcoran